Avaya 5601 Telephone User Manual

IP Office (R3.0)
5601 User Guide
40DHB0002UKFF – Issue 1 (7th February 2005)
Page ii - Contents
Contents
The 5601 Telephone ............................................................................. 3
Overview of the 5601............................................................................................................... 3
Call Appearance Buttons ......................................................................................................... 3
Basic Call Handling Features .............................................................. 4
Answer a Call........................................................................................................................... 4
Make a Call.............................................................................................................................. 4
Clearing a Call ......................................................................................................................... 4
Hold ......................................................................................................................................... 4
Redial ...................................................................................................................................... 5
Message .................................................................................................................................. 5
Transfer ................................................................................................................................... 5
Conference .............................................................................................................................. 5
System Features ................................................................................... 6
Introduction .............................................................................................................................. 6
Making Calls ............................................................................................................................ 6
Answering Calls ....................................................................................................................... 6
Call Forwarding........................................................................................................................ 7
Diverting Calls.......................................................................................................................... 7
Do Not Disturb ......................................................................................................................... 8
Voicemail ................................................................................................................................. 8
Default Feature Codes............................................................................................................. 9
Page ii
Contents
IP Office (R3.0) 5601 User Guide
40DHB0002UKFF – Issue 1 (7th February 2005)
The 5601 Telephone
Overview of the 5601 - Page 3
The 5601 Telephone
Overview of the 5601
This guide covers the use of the Avaya 5601 telephone, running in Key and Lamp
mode, on Avaya IP Office telephone systems operating with Level 3.0 software. The
diagram below shows the main 5601 telephone features.
1.
Message lamp: Lit when the user has voicemail messages. Can also be set to
flash when the phone is ringing.
2.
Call Appearance Buttons and LEDs:
Two Call Appearance Buttons provide call appearance for both incoming and
outgoing calls.
Hold: Places a call on hold; retrieves a held call.
Call Handling Buttons: See Basic Call Handling Features on page 4.
• Transfer: Transfer call.
• Conference: Conference held calls.
• Drop: Drop call.
• Redial: Redial last number dialed.
Dial pad: Standard 12-button pad for dialing telephone numbers.
3.
4.
5.
6.
Volume Controls:
Adjusts the handset or ringer volume, depending on which item is in use.
7. Headset Socket: Located on the side of the telephone
8.
Messages: Access the user's mailbox.
Call Appearance Buttons
Having two call appearance buttons is useful. When holding a call you can answer
another call and then use the call appearance keys to switch between calls.
If you are set to receive call waiting indication, the waiting call is shown against the
next call appearance key. Again you can switch between calls using the call
appearance keys.
IP Office (R3.0) 5601 User Guide
40DHB0002UKFF – Issue 1 (7th February 2005)
The 5601 Telephone - Page 3
Overview of the 5601
Page 4 - Answer a Call
Basic Call Handling Features
Basic Call Handling Features
Answer a Call
When a call arrives at your 5601 telephone, you hear a ringing tone and the LED next
to the call appearance button flashes.
To answer an incoming call:
Do one of the following:
• If you are not active on another call, answer the call using your handset.
• If you are active on a call already, place the active call on hold (see Hold on page
4), and then answer the incoming call.
Make a Call
You can make calls from the 5601 telephone using one of two methods.
To make a call manually:
1. Lift the handset and when you hear dial tone, key the required number
or
2. Key the required number. Lift the handset to listen to the progress of the call
(answered, busy or no answer)
Note:
If you are calling an external number, be sure to include the required code (for
example, 9) to access an outside line.
To make a call automatically:
1. Press
Redial to have the 5601 telephone dial the last number that you
dialed. Lift the handset to listen to the progress of the call (answered, busy or no
answer).
Clearing a Call
To clear an established call either:
1. Replace the handset
or
2. Press
Drop.
Hold
If, with a call in progress, a second call arrives and is shown against a Call Appearance
key, you can then Hold the first call and answer the second call.
To put a call on hold:
Hold and answer the second call by pressing its Call Appearance
1. Press
key. The LED beside the first call appearance button flashes to show that it is on
hold.
To return to the held call:
1. Clear or put on hold the second call and press the Call Appearance button of the
held call.
Notes: 1. If the system feature AutoHold is on (consult your System Administrator)
then you can hold an active call by pressing the second call’s Call
Appearance button. If AutoHold is off, then pressing the second call’s Call
Appearance button will drop the first call.
2. To transfer a held call see Transfer on page 5.
Page 4 - Basic Call Handling Features
Answer a Call
IP Office (R3.0) 5601 User Guide
40DHB0002UKFF – Issue 1 (7th February 2005)
Redial
Basic Call Handling Features - Page 5
Redial
The Redial (or Last Number Dialed) feature automatically redials the last extension or
outside number (up to 24 digits) you dialed.
To redial the last number that you dialed:
1. Press
Redial.
Message
Your Message lamp turns on when a caller has left a message for you.
Lift the handset and press the
follow the prompts.
Message button to retrieve your messages, and
Transfer
The Transfer feature allows you to transfer a call from your telephone to another
extension or outside number.
To transfer the current call to another extension
1. With a call in progress, press
Transfer.
2. When you hear dial tone, dial the number to which the call is to be transferred.
3. Do one of the following:
• To transfer the call without announcing it, press
Transfer again and
hang up. The transfer is complete.
• To announce the call before transferring it, wait for the called party to answer.
If the called party is willing to accept the call, hang up to complete the transfer.
If the called party does not wish to accept the call, press
Transfer again
to return to the original caller.
• If the line is busy or if there is no answer you can return to the held call by
pressing it’s call appearance button.
To transfer a new call to a held call using Conference:
1. With a call in progress and you wish to make an enquiry call or another call arrives,
press
Hold. Make or answer the second call. The second call requires to be
transferred to the first held call.
2. To transfer the new call to the held call, press
Conference and then
Drop. The transfer is complete.
Conference
The Conference feature allows you to conference other parties (including yourself) into
a call. The number of parties allowed in a conference is controlled by your telephone
system.
To add another party to a call:
1. Press
Conference.
2. Dial the number of the person you want to add to the call.
3. Wait for an answer.
If the called party does not answer or does not want to join the conference, press
Drop. You can return to the held call by pressing its call appearance button.
again.
4. To add the person to the call, press
5. Repeat Steps 1 through 4 for additional conference connections.
To add a held call to an active call
1. Press
Conference.
2. All calls that are on Hold are added to the conference.
IP Office (R3.0) 5601 User Guide
40DHB0002UKFF – Issue 1 (7th February 2005)
Basic Call Handling Features - Page 5
Redial
Page 6 - Introduction
System Features
System Features
Introduction
As well as your phones specific features, you can access a number of system features
by dialing short codes.
These instructions are for the system's default configuration. They assume that you are
using the default feature codes (see Default Feature Codes on page 9). It also
assumes that you have full access to all features and the public telephone network.
Consult your System Administrator for details of short codes that may have been
changed.
Other System Features, that would normally be allocated to soft keys by your System
Administrator, are not supported on the 5601.
Making Calls
Internal Calls: To make a call to another extension, simply dial the number.
External calls: To make an external call, either dial the number (prefixed by the
access code if required) or use a speed dial code (contact your system manager for a
list of your speed codes).
If you hear busy tone while dialing, then the call may be barred. Your system manager
can bar certain calls, such as those to premium rate numbers and international calls
Answering Calls
Ringing at your own extension:
Simply pick up the handset. When in headset mode, press the button associated with
the alerting call.
The default ringing cadences are:
• Internal calls have a single ring cadence
• External calls have a double ring cadence.
These can be changed by your System Administrator.
Ringing at another extension: You can answer from your own phone by using Call
Pick-Up; lift your handset and dial:
-
*30 to answer a call ringing anywhere.
*31 to answer a call within your group.
*32*201# to answer the call for a particular extension, in this example 201.
Note:
If your phone rings for any longer than a specified period (15 seconds in
default), any re-direction feature that you have activated, such as voicemail or
call forwarding, will come into effect.
Page 6 - System Features
Introduction
IP Office (R3.0) 5601 User Guide
40DHB0002UKFF – Issue 1 (7th February 2005)
Call Forwarding
System Features - Page 7
Call Forwarding
Your calls can be forwarded to another extension or an external number either when
you are away from your desk (on no answer), when your extension is busy, and all
calls (for example when you go on holiday).
•
•
•
•
To switch forward direct station (i.e. not Hunt Group*) calls on dial *01, to switch it
off dial *02.
To switch forward on busy on dial *03, to switch it off dial *04.
To switch forward on no answer on dial *05, to switch it off dial *06.
To set the number to which your calls are forwarded dial *07*201#, forwarding to
201 in this example.
* To forward Hunt Group Calls On/Off, use *50 and *51 respectively.
Diverting Calls
You can divert your calls to another extension. In the examples below N is the
extension to which you want your calls diverted. Note that, if you do not answer calls at
the temporary extension, they are forwarded to your own voicemail or call forwarding
number.
At another extension:
•
•
*12*N# from the extension you are temporarily using.
*13*N# to re-direct the calls back to your own extension, before you return to it.
At your own extension:
•
•
*14*N# from your own extension.
*14*# to cancel either feature from your own extension.
IP Office (R3.0) 5601 User Guide
40DHB0002UKFF – Issue 1 (7th February 2005)
System Features - Page 7
Call Forwarding
Page 8 - Do Not Disturb
System Features
Do Not Disturb
You may choose to receive no calls at all or only those from particular callers on your
exceptions list:
•
•
•
To switch Do Not Disturb on (with or without exceptions) dial *08, to switch it off
dial *09.
*10*N# to add a number to the exception list.
*11*N# to delete a number from the exception list.
Note:
Your callers, other than your exceptions, either hear busy tone or are redirected to your voicemail.
Voicemail
Where your system has voicemail support and has been installed:
•
•
To switch voicemail on dial *18, to switch it off dial *19.
To retrieve your voicemail, use the code *17.
Your voicemail may be set up to deliver your messages by calling you whenever you
hang up: this feature is known as Voicemail Ringback.
•
To turn Voicemail Ringback on dial *48; to turn it off dial *49.
Dialing a number while listening to your messages invokes further facilities:
Once messages have been delivered, they are held on the system for 24 hours.
You can collect your voicemail from another extension by using the PIN your System
Administrator has set up for you. You can collect your messages if you are out of the
office, by either dialing from a number that has been registered for the purpose or by
dialing your extension number and PIN when prompted. If validation is successful, then
dial 1 to retrieve your mail.
The System Administrator also specifies the reception number, to which the call is
diverted if the caller dials 0, and your email address if your voicemail and email are
integrated.
Page 8 - System Features
Do Not Disturb
IP Office (R3.0) 5601 User Guide
40DHB0002UKFF – Issue 1 (7th February 2005)
Default Feature Codes
System Features - Page 9
Default Feature Codes
The following are the normal default feature codes available to all users. Your System
Administrator may add additional codes for other features and for speed dials.
The N where shown, should be replaced by the appropriate number. For example, with
*07*N#, replace N with the extension to which you want your calls forwarded when you
have forwarding switched on.
*00
Cancel All Forwarding
*32*N#
Call Pick Up Extension
*01
Forward Unconditionally On
*33*N#
Call Queue
*02
Forward Unconditionally Off
*34
Hold Music
*03
Forward on Busy On
*35*N#
Extn Login
*04
Forward on Busy Off
*36*N#
Extn Logout
*05
Forward on No Answer On
*37*N#
Park Call
*06
Forward on No Answer Off
*38*N#
Ride Call
*07*N#
Forward to number
*39
Relay On
*08
Do Not Disturb On
*40
Relay Off
*09
Do Not Disturb Off
*41
Relay Pulse
*10*N#
Do Not Disturb Exception Add
*42
Relay On
*11*N#
Do Not Disturb Exception Delete
*43
Relay Off
*12*N#
Follow Me Here
*44
Relay Pulse
*13*N#
Follow Me Here Cancel
*45*N#
Call Steel
*14*N#
Follow Me To
*46
Call Steel
*15
Call Waiting On
*47
Conference Add
*16
Call Waiting Off
*48
Voicemail Ringback On
*17
Voicemail Collect
*49
Voicemail Ringback Off
*18
Voicemail On
*50
Forward Hunt Group Calls On
*19
Voicemail Off
*51
Forward Hunt Group Calls Off
*20*N#
Set Hunt Group Night Service
*52
Clear Call
*21*N#
Clear Hunt Group Night Service
*53*N#
Call Pickup Members
*29
Toggle Calls
*57*N#
Forward on busy number
*30
Call Pick Up Any
*70*N#
Dial Physical Extn by Number
*31
Call Pick Up Group
*71*N#
Dial Physical Extn by ID
IP Office (R3.0) 5601 User Guide
40DHB0002UKFF – Issue 1 (7th February 2005)
System Features - Page 9
Default Feature Codes
Performance figures and data quoted in this document are typical, and
must be specifically confirmed in writing by Avaya before they become
applicable to any particular order or contract. The company reserves the
right to make alterations or amendments to the detailed specifications at
its discretion. The publication of information in this document does not
imply freedom from patent or other protective rights of Avaya or others.
Intellectual property related to this product (including trademarks) and
registered to Lucent Technologies have been transferred or licensed to
Avaya.
All trademarks identified by the ® or ™ are registered trademarks or trademarks,
respectively, of Avaya Inc. All other trademarks are the property of their respective
owners.
This document contains proprietary information of Avaya and is not to be
disclosed or used except in accordance with applicable agreements.
Any comments or suggestions regarding this document should be sent
to "wgctechpubs@avaya.com".
© 2005 Avaya Inc. All rights reserved.
Avaya
Sterling Court
15 - 21 Mundells
Welwyn Garden City
Hertfordshire
AL7 1LZ
England
Tel: +44 (0) 1707 392200
Fax: +44 (0) 1707 376933
Email: contact@avaya.com
Web: http://www.avaya.com
IP Office (R3.0) 5601 User Guide
40DHB0002UKFF – Issue 1 (7th February 2005)