Avaya GPS-DG9208G3 Automobile Accessories User Manual

GPS-DG9208G3 | Vehicle Specific Mounting Bracket for Most Portable GPS
SP-SBH-Kit
Dual-T Tab
Connects to
adapter plates
DG-92-08-G3
Pro.Fit™
Vehicle Specific
Mounting Bracket
APTTO
Adapter Plate for
TomTom ONE
(See included Pro-Fit
manual for instructions
& specific car
compatibility)
APTTEP
Adapter Plate
for EasyPort™
APTTOXL
Adapter Plate for
TomTom ONE XL / XL • S
APTTGO-S20
Adapter Plate for
TomTom GO
Package Contents:
(1) DG-92-08-G3 - Pro.Fit™ Vehicle Specific Mounting Bracket*
(1) SP-SBH-Kit - Dual-T Head with Swivel Ball Socket & Locking Ring
(1) APTTO - Adapter plate for TomTom ONE pattern
(1) APTTOXL - Adapter plate for TomTom ONE XL pattern
(1) APTTGO520 - Adapter plate for TomTom GO pattern
(1) APTTEP - Adapter plate for TomTom EasyPort™ pattern
(1) APTTSE - Adapter plate for TomTom Start™ and Ease™ pattern
(1) APMM200 - Adapter plate for Mio Moov 200 Series pattern
(1) APMM300 - Adapter plate for Mio Moov 300 Series and newer Magellan GPS patterns
TomTom Device Compatibility:
TomTom ONE 125 (TomTom EasyPort Mount)
TomTom ONE 130, ONE 130-S (TomTom EasyPort Mount)
TomTom ONE 140, ONE 140-S (TomTom EasyPort Mount)
TomTom XL 325, XL 325-S (TomTom EasyPort Mount)
TomTom XL 330, XL 330-S (TomTom EasyPort Mount)
TomTom XL 340, XL 340-S (TomTom EasyPort Mount)
TomTom XXL 530-S, XXL 540-S (TomTom EasyPort Mount)
TomTom ONE (US Edition, US 3rd Edition)
TomTom ONE XL (1st Edition) - TomTom ONE XL-S (1st Edition)
TomTom ONE 22, ONE 22 Regional, ONE 22 Regional Traffic
TomTom XL 22, XL 22 Regional (TomTom EasyPort Mount)
TomTom ONE UK / EUROPE (NEW Edition aka 2nd Edition, 3rd Edition)
TomTom GO 520 / 530 / 630 / 720 / 730 / 920 / 920T / 930
TomTom Start and Ease
Garmin Nuvi Device Compatibility - 17mm Ball Pattern: 200, 200w, 205, 205w, 250, 250w,
255, 255w, 260, 260w, 265T, 265WT, 270, 275T, 285WT, 300, 300T, 310, 310T, 350, 360, 360T, 370, 370T, 500,
550, 600, 610, 650, 660, 670, 680, 710, 750, 755T, 760, 760T, 765T, 770, 775T, 780, 785T, 850, 855, 860, 880, 885T,
1200, 1250, 1260T, 1300, 1350, 1340T, 1350T, 1370T, 1390T, 1450, 1490T, 1690, 5000
Garmin StreetPilot Device Compatibility: c310, c340, c510, c530, c550, c580
Magellan GPS Device Compatibility:
A
APTTSE
Adapter Plate
for TomTom
Start™ & Ease™
APMM200
Adapter Plate
for Mio Moov
200 Series
Patent Pending
APMM300
Adapter Plate
for Mio Moov
300 Series & newer
Magellan GPS
Magellan Maestro 3100, 3140, 3200, 3210, 3220, 3225, 3250, 4000, 4010, 4040, 4050, 4210, 4215, 4200, 4220,
4245, 4250, 4350, 4370, 5310, 5340
Magellan RoadMate 300, 360, 500, 500 Plus, 700, 760, 800, 860T 1200, 1210, 1212, 1215, 1220, 1230, 1340,
1400, 1412, 1430, 1440, 1445T, 1470, 1475T, 2000, 2200T, 2250T, 3000T, 3050T, 6000T
Magellan Triton 1500, 200, 2000, 300, 400, 500
Mio Moov Device Compatibility: Mio Moov 200 Series and Mio Moov 300, 301, 310, 330, 330
Europe, 360, 370 Europe, 380, Mio Knight Rider Edition, Moov 500, S401, S501, M300, M400
NAVMAN Device Compatibility: S30, S30 3D, S50, S50 3D, S70, S90i
*See included Pro.Fit maual for Vehicle Specific Mounting Bracket instructions. For question regarding
installation, contact Pro.Fit at 800.388.0073.
Installing the Vehicle Specific Moutning Bracket
Connect Adapter Plate for TomTom ONE or ONE XL to Device
Step 1.
Step 1.
See the included ProFit VSM Bracket manual for instructions
on installing the VSM Bracket. Arkon reccomends that you
have the VSM bracket professionally installed. Arkon is
not responsible for any unintended damaged caused by
installation of the VSM Bracket.
Slide the adapter plate up into the grooves on the back of the
TomTom ONE, XL, or XL • S device (not included, sold separately).
*See included Pro.Fit maual for Vehicle Specific Mounting Bracket
instructions. For question regarding installation, contact Pro.Fit at
800.388.0073.
Connect Dual-T Head to VSM Mounting Pedestal
Step 1.
Slip the tightening ring (A) over the VSM bracket ball. Snap the
dual-T head adapter plate (B) on to the bracket ball (C). Screw
the tightening ring over the adapter plate until securely holding
the plate. Adjust the angle as needed.
B
Connect TomTom ONE, XL, or XL • S Device to Pedestal
Step 1.
Connect the dual T-tabs (A) on the dual-T pedestal to the dual
T-tab slots (B) on the adapter plate.
B
C
A
A
!
!
Continued on other side...
Do not place mount in or near an air bag deployment zone.
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
All brand names and product names are trademarks or registered trademarks of their respective owners.
The Mobile Mounting Specialists™
www.arkon.com
Consumer Hotline:
Arcadia, CA 91006 USA
USA (800) 841-0884
Designed in USA | Made in the USA & China
INT’L (626) 254-9005
© Copyright 2010 Arkon Resources, Inc.
Monday - Friday 9 am - 5 pm, PST
GPS-DG9208G3 | Vehicle Specific Mounting Bracket for Most Portable GPS
Connect Adapter Plate for TomTom EasyPort™ to Pedestal
Connect the dual T-tabs (A) on the dual-T pedestal to the dual
T-tab slots (B) on the adapter plate.
Step 1.
Connect TomTom Start™ & Ease™ Device to Pedestal
Step 1. Attach the dual-T adapter plate for TomTom to the pedestal by
inserting the dual-T tabs of the pedestal (A) into the dual T-slots
on the adapter plate (B).
B
B
A
A
Connect TomTom Device to Pedestal with EasyPort™ pattern
Step 1.
Step 2. While holding the mounted TomTom adapter plate, gently insert
the TomTom device (not included, sold separately) into the
adapter plate until an audible click is heard.
While holding the mounted TomTom adapter plate, gently
insert the TomTom device (not included, sold separately) into
the adapter plate until an audible click is heard. The device
can then be rotated into the desired viewing angle.
Connect Garmin Device to 17mm ball head
Connect Adapter Plate for TomTom GO GPS
Step 1.
Step 1. Attach Garmin GPS to 17mm ball head by firmly pushing the
ball head (A) into the 17mm ball head socket on the back of the
device (B) as pictured below.
Slide the adapter plate up into the grooves on the back of the
TomTom GO series device (not included, sold separately).
B
A
Connect Mio Moov 200 Series or NAVMAN 530 3D GPS Device
to Pedestal
Step 1.
Connect TomTom GO GPS to Pedestal
Step 1.
Connect the dual T-tabs (A) on the dual-T pedestal to the dual
T-tab slots (B) on the adapter plate.
Connect the adapter plate for Mio Moov to Mio device (not
included, sold separately) by placing the feet (A) of the adapter
into the corresponding notches (B) on the bottom of the device.
Holding the thumb tab down (C), insert the upper tooth (D) into
the recessed slot on the back of the device.
C
D
B
A
A
!
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
B
The Mobile Mounting Specialists™
www.arkon.com
Consumer Hotline:
Arcadia, CA 91006 USA
USA (800) 841-0884
Designed in USA | Made in the USA & China
INT’L (626) 254-9005
© Copyright 2010 Arkon Resources, Inc.
Monday - Friday 9 am - 5 pm, PST
GPS-DG9208G3 | Vehicle Specific Mounting Bracket for Most Portable GPS
Step 2. Connect the dual T-tabs (E) on the dual-T pedestal to the dual
T-tab slots (F) on the adapter plate.
F
E
Connect Mio Moov 300 Series, NAVMAN S50, S50 3D, 570, S90i or
newer Magellan Devices to Pedestal
Step 1.
Insert the power cord (not included, sold separately) into the
grooved slot in the bottom of the adapter plate.
Step 2.
Connect the dual T-tabs (A) on the dual-T pedestal to the dual
T-tab slots (B) on the adapter plate.
B
!
A
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
The Mobile Mounting Specialists™
www.arkon.com
Consumer Hotline:
Arcadia, CA 91006 USA
USA (800) 841-0884
Designed in USA | Made in the USA & China
INT’L (626) 254-9005
© Copyright 2010 Arkon Resources, Inc.
Monday - Friday 9 am - 5 pm, PST
Page 8
Dodge Challenger 2009-2010
DG-92-08-G3
PLEASE READ COMPLETE INSTRUCTIONS BEFORE INSTALLING THIS VSM G3
All instructions assume a drivers seat vantage point. Caution is advised when removing and reassembling
wood or plastic parts of a dash. Applying unnecessary force or pressure may cause a piece to crack or break.
When properly installed, the metal between the ball and 2 small holes is all that is exposed.
(Some exceptions apply).
TOOLS REQUIRED: Dash Trim Removal Tool (DTRT), Phillips screwdriver
PARTS INCLUDED: VSM G3, A Plate, J Stem
LOCATION: Right of Radio
Step 1: Place the DTRT in between the radio
bezel and the dash molding Photo #1. Gently
use the DTRT in a twisting motion around the
radio bezel releasing a series of eight (8)
retainer clips. Do not disconnect any wiring to
the bezel and simply set the radio bezel off to
the side.
Step 2: Remove the two Phillips screws securing
the right side of the radio to the dash molding
and carefully set them off to the side. Place
the VSM G3 flush to dash molding over the screw
holes and evenly tighten the VSM G3 to the right
side of the radio molding as pictured in Photo
#2.
Step 3: Once the VSM G3 is flush and secured
to the right side of the radio, replace the radio
bezel back into its secured original position.
You have successfully installed your VSM G3!
Insert DTRT
Here
1
2
Note: Note: See the Assembly Instructions for G3
Components for additional information.
3
Pro.Fit International, Inc.® may not be held liable for any damage to a vehicle before, during or after the installation or removal of this VSM
G3TM. Pro.Fit International may not be held liable for any personal injury resulting from accident or improper installation. Pro.Fit International,
Inc.®
1335 Eagandale Court,
Eagan,
MN 55121, Ph: 651.688.3588 or 800.388.0073
Fx: 651.688.9876
© Pro.Fit International, Eagan, MN 2009
View Instruction & Updates
Online at
www.pro-fit-intl.com