Avenview FO-HDSDI-L-SET Network Card User Manual

HD/SD-SDI over Multimode LC
type Fiber Optic Extender with
Loop Out
User’s Guide
Models
FO-HDSDI-L-SET
© 2008 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to
specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual
property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes
no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied
warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly
prohibited.
www.avenview.com
1
Table of Contents
Section 1: Getting Started ...................................................................................................................... 3
1.1
Important Safeguards ............................................................................................................ 3
1.2
Safety Instructions ................................................................................................................. 3
1.3
Regulatory Notices Federal Communications Commission (FCC) ......................................... 4
1.4
Introduction ........................................................................................................................... 4
1.5
Features ................................................................................................................................. 5
1.6
Package Contents................................................................................................................... 5
1.7
Before Installation.................................................................................................................. 5
1.8
Panel Description ................................................................................................................... 6
Section 2: Installation ............................................................................................................................. 7
Section 3: Specifications......................................................................................................................... 8
www.avenview.com
2
Section 1: Getting Started
1.1
Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover


Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
 Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
 Repair or attempted repair by anyone not authorized by us.
 Any damage of the product due to shipment.
 Removal or installation of the product.
 Causes external to the product, such as electric power fluctuation or failure.
 Use of supplies or parts not meeting our specifications.
 Normal wear and tear.
 Any other causes which does not relate to a product defect.

Removal, installation, and set-up service charges.
1.2
Safety Instructions
The FO-HDSDI-L-SET, HD/SD-SDI over Multimode LC-type Fiber Optic Extender with loop out has been tested
for conformance to safety regulations and requirements, and has been certified for international use.
However, like all electronic equipments, the FO-HDSDI-L-SET should be used with care. Read the following
safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.




Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards


Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.


www.avenview.com
3
1.3
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4
Introduction
The FO-HDSDI-L-SET is an ideal and economic solution designed for transmission of multi-rate SDI video, with
embedded audio and metadata over a multi-mode optical fiber cable.
The transmitter module (FO-HDSDI-L-S) receives one HD-SDI electrical input, perfectly converts SMPTE 292M,
SMPTE 259M, or DVB-ASI electrical SDI signal to multi-mode optic SDI signals. The receiver module
(FO-HDSDI-L-R) receives optical signal from input LC connector, and then perfectly converts it to electrical SDI
signal. Both transmitter and receiver provide equalizing and re-clocking at input unit in order to re-construct
the signal for consistent quality. The FO-HDSDI-L-SET is perfect for today’s broadcast applications, including
video production, video editing, studio to studio and studio to CATV head end. In addition, since transmission
of content is inherently secure and immune to outside interference, fiber applications are favored in
government, military, and medical environments.
www.avenview.com
4
1.5
-
-
1.6
Features
Enable transmission of digital video signal over optical fiber up to 1 km
Automatic cable EQ up to 300m (1000ft) at SD-SDI or 150m (500ft) for HD-SDI
Standard LC-type fiber optic connector
Supports following protocols:
o SMPTE 259M (270Mbps)
o SMPTE 259M (360Mbps)
o SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps)
o DVB ASI (270Mbps)
Automatic re-clocked / Manual bypass (optional upon request)
One SDI loop-out and one SDI BNC Ouput
HD/SDI Input signal detection
Easy installation
Package Contents
Before you start the installation of the converter, please check the package contents.
-
FO-HDSDI-L-SET
Power Adapter (+5VDC)
x1
x2
-
User’s Manual
x1
1.7




Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
www.avenview.com
5
1.8
Panel Description
TRANSMITTER
RECEIVER
www.avenview.com
6
Section 2: Installation
Follow these instructions for installation of FO-HDSDI-L-SET:
1.
2.
3.
Connect a camera or other HD/SD-SDI device to transmitter of FO-HDSDI-L-SET
Connect devices equipped with HD/SD-SDI inputs (e.g. monitors or video processors) to receiver
FO-HDSDI-L-SET
Plug power adapter to 5V DC power jack of FO-HDSDI-L-R & FO-HDSDI-L-S
www.avenview.com
7
Section 3: Specifications
Item
Description
Model
Model
SDI Standards
FO-HDSDI-L-S
Transmitter (TX)
Auto HD/SD-SDI Detection
Yes
SMPTE 259M (270Mbps / 360Mpbs), DVB ASI (270Mbps)
SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps)
[1.485Gpbs & 1.485/1.001Gbps]
Supported Protocols
Video Bandwidth
Data Rates
Supported Video
SDI signal type
Output impedance
Auto Reclocking Mode
Cable equalization
Loop Out
Audio support
RP-918 pathological
patterns
Input Connectors
Output Connectors
BNC connector
SD-SDI & HD-SDI
270 / 1483 / 1485 Mbps
[HD] 720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60, 1080p24/30
[SD] NTSC@59.94Hz, PAL@50Hz
SMPTE-292M, SMPTE-259M, DVB-ASI
75
Automatic detection: 270Mbps / 1.483Gbps / 1.485Gbps
Automatic bypass: 177Mbps / 360Mbps / 540Mbps
[HD-SDI] up to 150m (500ft)
[HD-SDI] up to 125m (410ft)
[SD-SDI] up to 300m (1000ft)
[SD-SDI] up to 300m (1000ft)
1 re-clocking SDI Loop Out
Yes
Immune
1x BNC (SDI)
1 x Optical LC (SDI)
1x Optical LC (SDI)
2 x BNC (SDI)
1 x BNC (SDI – Loop Out)
75 inter-locked socket
Optical Fiber Connector
Fiber Optics
Dimensions
Weight
Power Supply
Power Consumption
Operating Temperature
Storage Temperature
Relative Humidity
FO-HDSDI-L-R
Receiver (RX)
LC Type
Wavelength: 850 nm
Extinction ratio: 8-10
Overshoot < 10%
Optical power: -4 to -10 dBm
Type: Multi-mode
Jitter < 0.2 UI
Rise/fall < 500 pS
Receiver sensitivity: -17 dBm
4.3” x 1.6” x 1.2” (L x W x H)
155g
5V 4A DC
5 Watts (max)
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
www.avenview.com
8
www.avenview.com
9
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the
Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and
non-infringement.
www.avenview.com
10
Download PDF

advertising