Service manual | Barco R9002120 Projector User Manual

JUN. 2002 PRINTED IN KOREA
P/No.:3828EA3013E
WASHING MACHINE
SERVICE MANUAL
CAUTION
Before servicing the washer, Read the safety precautions in the manual.
MODELS : WF-T10(~3)0(~2,6)1(~5)TP(H,E,F)(S,3)
WF-T802/T852(A)/T853A
WF-T(F/C)1091~3, 1191~3T(C/H/P)
WF-T(F/C)1022, 1122, 1001T(C/H/P)
WF-T1268TH, 2409KTb, 2602kTa
WF-T1491TP, T11292TP, T1292TP, T1291TP
WF-T1081TP, T1592TP, T1593TP
WF-T1241TP, T1133TH
WF-G15KTB, G13KTC, B15KTB, B13KTC
WF-T1400TH, T1022TPX
SAFETY PRECAUTION!
■ DISASSEMBLE POWER CORD BEFORE SERVING
■ RECONNECT ALL GROUNDING DEVICES
IMPORTANT SAFETY NOTICE !
This service information is intended for individuals
possessing adequate backgrounds of electrical,
electronic and mechanical experience.
Any attempt to repair this appliance may result in
personal injury or property damage.
The manufacturer or seller can not be responsible
for the interpretation of this information, nor can it
assume any liability in connection with its use.
CONTENTS
1. Specifications ..................................................................................................................................................3
2. Installation Instructions....................................................................................................................................4
3. Operating Instructions
3-1. Identification of Parts...........................................................................................................................10
3-2. Before Starting to Wash ......................................................................................................................11
3-3. Function of Each Button......................................................................................................................16
3-4. Washing Programs..............................................................................................................................18
3-5. Other Functions...................................................................................................................................20
3-6. Care and Maintenance........................................................................................................................25
4. Service Information
4-1. Schematic Diagram.............................................................................................................................26
4-2. Wiring Diagram ...................................................................................................................................28
4-3. Program Time Chart............................................................................................................................29
4-4. Adjustment ..........................................................................................................................................32
4-5. Disassembly Instruction ......................................................................................................................33
4-6. Test Running without water.................................................................................................................36
4-7. Trouble Shooting against Common Washing Problems .....................................................................37
4-8. Trouble Shooting Methods According to Error Message ....................................................................38
4-9. How to Diagnose and Repair by Symptom.........................................................................................40
5. Exploded View ............................................................................................................................................52
6. Replacement Part List...................................................................................................................................56
2
1. SPECIFICATIONS
Model
WF-T10(~3)0(~2,6)1(~5)TP(H,E,F)(S,3), WF-T802/T852(A)/T853A
WF-T(F/C)1091~3/1191~3T(C/H/P), WF-T(F/C)1022/1122/1001T(C/H/P)
WF-T1268TH/2409KTb/ 2602kTa/T1491TP/T1022THX/T1133TH
WF-T1081TP/T1491TP/T11292TP/T1292TP/T1291TP/LA-1499ST/T1592TP/T1593TP/T1241TP
WF-G15KTB/G13KTC/WF-B15KTB/B13KTC/WF-T1400TH/T1022TPX
Power Sourse
Refer to rating label on the back of Washer
Input
Refer to rating label on the back of Washer
Capacity
Refer to rating label on the back of Washer
Inner Tub
Stainless
Inlet Water Pressure
0.3kgf/cm2 ~ 8kgf/cm2
Rating of Fuse
250V, 6A for 220~240V/50Hz
125V, 12A for100~127V/60Hz
Spin Speed
50Hz : 700
50 / 60Hz : 740
50
Dim.
Refer to rating label on the back of Washer
Weight
Refer to rating label on the back of Washer
Program
Fuzzy, Economy, Jean, Wool
Water Level
7 Stages
Reservation
Available for 3 ~ 48 Hr
Unbalance Switch
B.P Sensor (S.F Switch)
Lid Interlock Switch
B.P Sensor (S.F Switch)
Child Lock
Applied
Lint Filter
Double
Softener Dispenser
Applied
Detergent Dispenser
Applied
Bleach Inlet
Applied
Auto Power Off
Applied
3
2. INSTALLATION INSTRUCTIONS
2-1. HOW TO ADJUST LEVEL
1
2
Installation area
·Install the washer on flat and firm
surface.
Checking level
·Open the lid, and check if the washer is
correctly leveled by looking down from
the top.
Adjustable leg
Turn the adjustable legs to set the washer
horizontal (2 EA).
How to use the adjusting plates
· Use the adjusting plates to level the washer when the
adjustable legs cannot cover the gap.
Improper installation of the washer may cause noise and malfunctioning.
CAUTION
1. The ventilating openings in the base area must not be obstructed be carpeting
when the washing machine is installed on a carpeted floor.
2. Install the washing machine on a level and firm surface, any tilt should be
less than 1°.
4
3
Checking slope
5
· If installation surface is tilted, the
washer will be shaken.
4
Horizontal setting
·Lift up the front of the washer and
adjust level by turning the adjustable
legs clockwise or using the adjusting
plate.
Confirming level
· Place the washer to original position
and confirm the level.
Distance between drain hose and the wall
· Distance between drain hose and the wall
should be more than 10 cm, and the distance
between the other part and the wall should be
more than 2 cm.
More than 10cm
More than 2cm
More than 2cm
5
2-2. CONNECTING WATER SUPPLY HOSE
Before connecting Water Supply Hose to water tap, check your hose type
and choose correct instruction. Water Supply Hose may vary according to
the country.
Make sure connect blue inlet hose to cold water tab, and orange inlet hose
to hot water tab.
Connecting Water Supply Hose to water tap
Normal Type
1
Normal tab without thread & screw type inlet hose.)
Rubber packing
Untighten the screw
Untighten the screw of the connector so
that the tap can be placed in the middle.
2
Fixing the connector to the tap
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
3
Attach the water supply hose to the connector
Push the water supply hose vertically
upwards so that the rubber seal within the
hose can adhere completely to the tap.
Connector
Water supply hose
4
Fixing the connector of connector and water supply hose
Attach the water supply hose to the
connector and then tighten it by screwing it
to the right.
5
Check the connection of water supply hose and the connector
After connecting the hose, open the tap to
check for any water leakage.
In case of water leakage, close the tap and
start again from step 1
6
One Touch Type
1
(NORMAL TAB WITHOUY THREAD & ONE TOUCH TYPE INLET HOSE.)
Separate Middle connector from Water Supply Hose
Separate Middle connector from the Water
Supply Hose by pulling the Pressing Rod and
the Pressing Handle that is attached to the
Water Supply Hose while pressing them.
Middle
connector
Fixed Stiicker
Pressing Handle
Pressing Rod
Water Supply Hose
2
Loosen the fixed nuts to connect the connector to the tap
Untighten the screw of the connector so that
the tap can be placed in the middle.
Rubber packing
Screw
Fixed sticker
Note
In case the tap is large.
Guide plate
If the tap diameter is too large or is square,
open the 4 screw and take out the guide
plate and follow step 1.
3
Rubber packing
Fixing Connectors to the Tap
Connector
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
4
Fixing Upper Connector and Middle Connector
Connector
Remove the fixed sticker in between the
Upper and Middle Connectors. Tighten the
connectors by holding one connector and
twist middle connector to the right.
5
Middle
Connector
Fixed sticker
Connecting Middle Connector and Water Supply Hose
Press down the pressing rod of the Water
Supply Hose which was separated from
middle connector(refer to Step1) and then
join it to the middle connector.
Pressing rod
Water Supply Hose
6
Connector
Middle
Connector
Checking the water leakage
After connecting the hose, open the tap to
check for any water leakage.
In case of water leakage, close the tap and
start again from step 1.
If you skip step1, it may cause water leakage.
7
Pressing handle
Screw Type
1
Attach the water supply hose to the tap.
Push the water supply hose up so that the
rubber packing within the hose can adhere
completely to the tap.
Water
tap
Rubber Packing
Water Supply Hose
2
Connect the water supply hose to the tap.
Connect the water supply hose to the tap and
then tighten it by screwing it to the right.
3
Check water leakage.
After connecting the hose, open the faucet to
check for any water leakage.
Connecting Water Supply Hose to the machine
Connect the water supply hose to inlet valve
of the washing machine, and then lock it by
turning the hose connecting part.
Hose connector
Check to see if there is a rubber seal inside
the connector.
Rubber seal
8
2-3. CONNECT THE DRAIN HOSE
■ For pump model
· Connect the drain hose to
the outlet of the drain pump
located at the rear of the
washing machine.
·Attach the clip to the drain
hose. And then push it toward
the body of the washing
machine as indicated by the
arrow.
·Check that the drain hose is
hung up over the edge of the
laundry tub.
·Do not use an extension hose.
Hose
Guide
Within 50mm
0.9~1.2m
Drain Hose
· NOTE : · Never lay down the drain hose, as water will be discharged.
· Be sure the drain hose is properly routed so it will not kink
or lift from the sink.
·The discharge height should be approximately 0.9~1.2m from
the floor.
·Connect the drain hose adjusting the length of it not to be
dropped. If drain hose is dropped the drainage could be poor
because of blockage in the hose.
■ For non - pump model
· Connect the drain hose to the outlet of the
drain located at the back side of the
washing machine.
·Fix the drain hose with the clip.
And then push it toward the body as in the
figure.
·Keep it downward while the washing machine
is working.
·Ensure the hose is free from kinking.
CAUTION
·Do not install the washer where it is directly exposed to sunlight, wind, rain etc.
·Plug the power cord of this washer into a properly installed standard electrical outlet
that is switched & earthed.
9
3. OPERATING INSTRUCTIONS
3-1. IDENTIFICATION OF PARTS
WATER SUPPLY HOSE
• Make sure that water does
not leak.
• In case of one valve model
water supply hose is one.
SOFTENER DISPENSER
• Softener will automatically
flow into the tub.
DETERGENT DISPENSER
POWER SUPPLY
CORD
BLEACH INLET
FUNCTION
SELECTORS
DRAIN HOSE
For Pump Model
• Check out if the drain hose is
hung up before operating the
washing machine.
PULSATOR
ANTI RAT BASE
DRAIN HOSE
For non Pump Model
• Keep downward while the
washing machine is
working.
ADJUSTABLE LEG
SPINDLE
10
3-2. BEFORE STARTING TO WASH
Care Labels
* Look for a care label on your clothes. This will tell you about the fabric content of your garment
and how it should be washed.
Sort clothes into loads that can be washed with the same wash cycle, water temperature and spin speed.
Sorting
To get the best results, different fabrics need to be washed in different ways.
• SOIL (Heavy, Normal, Light)
• COLOR (Whites, Lights, Darks)
• LINT (Lint producers, Collectors)
Separate clothes according to the type and amount of soil.
Separate white fabrics from colored fabrics.
Separate lint producers and lint collectors.
Lint Producers
Lint Collectors
Terry cloth, Chenile, Towels, Nappies, Diapers
Synthetics, Corduroy, Permanent Press, Socks
Check before Loading
• Check all pockets to make sure that they are empty. Things such as nails, hairclips, matches, pens,
coins, and keys can damage both your washer and your clothes.
• Mend any torn garments or loose buttons. Tears or holes may become larger during washing.
• Remove belts, underwires, etc. to prevent damage to the machine or your clothes.
• Pretreat any dirt and stains.
• Make sure the clothes are washable in water.
• Check the washing instructions.
• Remove tissue in pockets.
WIRE
Pretreatment on stains or heavy soil
• Pretreat shirt collars and cuffs with a pre-wash product or liquid detergent when placing them in the washer.
Before washing treat special stains with bar soaps, liquid detergent or a paste of water and granular detergent.
• Use a pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The longer they are left the harder they are to remove.
Loading
Do not wash fabrics containing flammable materials (waxes, cleaning fluids, etc.).
Load Size
The water level should just cover the clothes. Adjust the load size accordingly.
Loosely load clothes no higher than the top row of holes in the washer tub. To
add items after washer has started, press Start button and submerge additional
items. Close the lid and press Start button again to restart.
WARNING
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other
flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any
type of oil on it (including cooking oils).
Doing so can result in death, explosion, or
fire.
Light and Large-sized clothing
Clothes like downs and woollens are light weight, large and float easily.
Use a nylon net and wash them in a small amount of water. If the laundry floats during the wash
cycle, it may become damaged. Use dissolved detergent to prevent the detergent from clumping.
Long laundry items
Use nylon nets for long, delicate items. For laundry with long strings or long length , a net
will prevent tangling during washing. Fasten zippers, hook, and strings to make sure that
these items don't snag on other clothes.
※ Nylon net is not supplied by LG.
11
Using Water
Amount of Water Level
WATER - DETERGENT
• This machine detects the quantity of laundry automatically, then sets the water level and
EX-LARGE
proper amount of detergent.
LARGE
• When you select a wash program, the water level and amount of detergent (to be used)
MEDIUM
will be shown on the control panel.
SMALL
• The following table shows the amount of water.
• When the water level is automatically detected, it may differ depending on the quantity of laundry even
though the same water level is indicated on the control panel.
• The amount of a cup in the diagram is about 40g for concentrated detergent.
Water temperature
• The machine sets the appropriate temperature automatically according to the wash program .
• You can change the water temperature by pressing the WATER TEMP button.
• The temperature of the water impacts the effectiveness of all laundry additives and therefore, the cleaning
results. We recommend temperatures of:
- HOT 49~60°C…(120-140˚F)
White items, diapers, underclothing and heavily soiled, colorfast items.
- WARM 29~40°C…(85-105˚F)
Most items
- COLD* 18~24°C…(65-75˚F)
Only very bright colors with light soil.
• When washing in cold water additional steps may be needed:
- Adjust detergent amount and pre-dissolve detergent in warm water
- Pretreat spots and stains
- Soak heavily soiled items
- Use appropriate bleach
* Temperature below 18°C…(65˚F) will not activate laundry additives and may cause lint, residue, poor cleaning,
etc. In addition, detergent manufactures and care labels define cold water as 26~29°C…(80-85˚F).
If the temperature of the water in the tub is too cold for your hands, the detergent will not activate and clean
effectively.
Attention
If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown
or orange spots or streaks. Iron is not always visible. Installation of water softener or an iron filter may be
necessary for severe cases.
Using Detergent
Detergent
Follow the detergent package directions. Using too little detergent is a common cause of laundry problems.
Use more detergent if you have hard water, large loads, greasy or oily soils or lower water temperature.
Choosing the right detergent
We recommend the use of domestic detergent, (powder, liquid or concentrated). Soap flakes or granulated
soap powders should not be used in your washing machine. When washing woolens remember to use
detergent suitable for washing woolens.
12
Using Detergent
How much detergent
When you select a wash program the water level and the amount of detergent (to be used) will be shown
on the control panel. The amount of a cup in the diagram is about 40g for concentrated detergent.
The correct amount of detergent will vary depending on the amount of soil in your clothes (Jeans and work
cloches may need more detergent, while bath towels usually need less.).
For liquid and concentrated detergents, follow the recommendations of the detergent manufacturer.
Note: To check you are using the correct amount of detergent, lift the lid of your machine about
half-way through the wash. There should be a thin layer of foam over the surface of the water. Lots
of foam may look good, but it does not contribute to cleaning your clothes. No foam means not
enough detergent has been used; soil and lint can settle back on the clothes or the washing
machine.
If excess detergent is used, the rinse will not be as clean and efficient. Also, it could cause
environmental pollution, so use it accordingly.
Attentión
Adding the detergent
Open the detergent dispenser and deposit the appropriate
amount of detergent.
Some detergents MUST be fully dissolved before
adding to your machine to get the best wash results.
Check the instructions on the detergent packet.
If you use powdered detergent it is essential that the required amount
be fully dissolved in very hot water before being added to warm or hot
water for the actual wash.
Pre-dissolving detergent in warm water when washing in cold water can
improve its performance.
Using Liquid Bleach
Powder Detergent
Where you deposit
the detergent
Bleach dispenser
• Check clothing care label for special instructions and separate
the laundry to be bleached
• Dilute liquid chlorine bleach.
• Measure the recommended amount of liquid bleach carefully
following instructions on the bottle.
• Before starting the washer, pour measured amount of bleach
directly into bleach dispenser. Avoid splashing or overfilling.
Powdered bleach should be mixed with water before pouring.
(
)
Attention
■ Never pour undiluted liquid bleach directly onto clothes or into the wash basket.
This may cause change of color or damage the laundry.
■ Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing can reduce
a toxic gas which may cause death.
■ Do not pour powdered bleach into bleach dispenser.
13
Using Fabric Softener
Available Fabric Softener Type
• Do not use concentrated fabric softener. This may cause some problems in automatic dispensing.
• For more details refer to the softener products instructions for use.
Depositing Fabric Softener
• Don't use softener with detergent. Use softener in
last rinse water
• When using dispenser, dilute softener (30ml) with
fresh water (30ml)
• When filling dispenser, do not splash or overfill. It
may stain clothes.
• Never pour fabric softener directly on clothes. It
may stain them
• If spotting occurs, wet and rub hand dishwashing
liquid (or mild bar soap) and rewash.
Powder Detergent & Fabric Softener dispenser.
Where you deposit
the softener
Fabric Softener Cap
* If the softener is over filled, it can over flow.
Limit Line
Depositing
softener
don’t fill it
above the
limit line.
Note
Fabric Softener will be inserted automatically during the final rinse and the machine gives on alarm sound.
When water pressure is low, the softener may have to be inserted manually.
Scrud(Waxy Build up)
Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener comes into contact with
detergent. This build-up is not brought about by a fault in the machine.
If scrud is allowed to build-up in the machine it can result in stains on your clothes or an unpleasant smell in your washer.
If you wish to use fabric softener we recommend
• Using fabric softener sparingly.
• When filling the dispenser, do not splash or overfill.
• Clean dispenser as soon as the cycle is finished.
• Clean your machine regularly. (refer to page 25)
• Cold water washing increases the chance of this build-up occurring. We recommend a regular warm or hot wash e.g. every 5th
wash should be at least a warm one.
• Fabric softener of thinner consistency is less likely to leave residue on the dispenser and contribute to a build-up.
14
Special Guide for Stain Removal
WARNING
■ Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or products
containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.
■ To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:
• Read and comply with all instructions on stain removal products.
• Keep stain removal products in their original labeled containers and out of children’s reach.
• Thoroughly wash any utensil used.
• Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
• Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning
solvents or other flammable or explosive substances because they give off vapors that could ignite or explode.
• Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or
sparks.
For successful stain removal:
• Remove stains promptly.
• Determine the kind of stain, then follow the recommended treatment in the stain
removal chart below.
• To pretreat stains, use a prewash product, liquid detergent, or a paste made from
granular detergent and water.
• Use cold water on unknown stains because hot water can set stains.
• Check care label instructions for treatments to avoid on specific fabrics.
• Check for colorfastness by testing stain remover on an inside seam.
• Rinse and wash items after stain removal.
Follow fabric care label
instructions
Stain Removal
STAIN
Adhesive tape, chewing gum,
rubber cement
Baby formula, dairy products, egg
Beverages (coffee, tea, soda,
juice, alcoholic beverages)
Blood
Candle wax, crayon
Chocolate
Collar or cuff soil, cosmetics
Dye transfer on white fabric
Grass
Grease, oil, tar (butter, fats, salad
dressing, cooking oils, car grease,
motor oils)
Ink
Mildew, scorch
Mud
Mustard, tomato
Nail polish
Paint, varnish
Rust, brown or yellow
discoloration
Shoe polish
TREATMENT
Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain remover or
nonflammable dry cleaning fluid.
Use product containing enzymes to pretreat or soak stains.
Pretreat stain. Wash using cold water and bleach safe for fabric.
Rinse with cold water. Rub with bar soap. Or pretreat or soak with product containing enzymes. Wash using
bleach safe for fabric.
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is
absorbed. Replace paper towels frequently. Treat remaining stain with prewash stain remover or
nonflammable dry cleaning fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Pretreat with prewash stain remover or rub with bar soap.
Use packaged color remover. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly.
Wash using hottest water safe for fabric.
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover,
denatured alcohol or nonflammable dry cleaning fluid.
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and hot water before washing. Badly
mildewed fabrics may be permanently damaged.
Brush off dry mud. Pretreat or soak with product containing enzymes.
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of
stain. Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,
OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate detergent and
nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
LIQUID : Pretreat with a paste of granular detergent and water. PASTE : Scrape residue from fabric. Pretreat
with prewash stain remover or nonflammable dry cleaning fluid. Rub detergent into dampened area, Wash
using bleach safe for fabric.
15
3-3. FUNCTION OF EACH BUTTON
▶ Changing various functions is possible only in PAUSE state.
Selection button does not work when the washer is in operation (Except for water level, water temp, water power button).
How to use delayed
washing
■ Use this function for delayed
washing.
■ Use it to set the delay time.
■ By pressing the button, it cycles
[3→4→5→...→11→12→14→
16→...→46→48→3] hours.
(Up to 48 hours can be
delayed).
Detergent deposit
display
■ Upon loading laundry, it
displays the correct amount of
detergent to be added
according to the amount of
laundry (based on
concentrated detergent).
■ To cancel delay time, turn the
power switch off.
Wash Process display
■ Indicates the current washing
status.
■ Next step is lit, current step blinks
and finished step is turned off.
NOTE
The display panel uses the
following abbreviation:
M(minutes), T(Times) and
M(minutes).
How to select temp.
■ Use it to select hot or cold
water (When hot water only is
selected, hot water is supplied
for washing and cold water are
supplied for rinsing).
WARM
HOT
COLD
LEVEL
■ In WOOL, HOME DRY
program, cold water is selected
automatically (Hot water may
damage the fabric).
DELAY
START
WATER
TEMP.
WATER - DETERGENT
EX-LARGE
LARGE
MEDIUM
SMALL
WATER
LEVEL
S TRONG
N ORMAL
G ENTLE
WASH
POWER
How to adjust the water level
Wash power
■ By pressing the button, it cycles
[LARGE→LARGE•EX-LARGE→EX-LARGE
→SMALL→SMALL•MEDIUM→MEDIUM
→MEDIUM•LARGE→LARGE]
■ At FUZZY and JEAN program, water level is selected automatically
based on the amount of laundry.
■ Water level is set to MEDIUM for SPEEDY program, LARGE for
WOOL and DELICATE program, EX-LARGE for BLANKET program.
■ Use it to adjust the strength of
water current.
■ By pressing the button, it
cycles
[ S G N ].
■ Strength of the water current can
be adjusted at any program.
At the beginning, it starts with
MED
( S ).
■ Water level can be adjusted even when the washer
is in operation.
16
D
For manual wash, rinse
and spin
Displaying abnormal operation
■ In case of abnormal operation, the following indications are displayed.
Abnormal water supply : INLET Er. lamp blinks.
Abnormal drainage : DRAIN Er. lamp blinks.
Abnormal spin : SPIN Er. lamp blinks.
Abnormal water level sensing :
displayed.
Abnormal lid open : DOOR Er. lamp blinks.
Abnormal over flooding sensing :
SOAK WASH
SHOWER RINCE SPIN
(SPRAY)
M
T
WASH RINSE
M
SPIN
INLET Er.
DRAIN Er.
DOOR Er.
SPIN Er.
FUZZY 3
HOME DRY
BLANKET
WOOL
(NORMAL)
displayed.
AUTO OFF
■ Wash :
Use it to change washing time.
By pressing the button[ 15min →
18min→21min→25min→40min→
60min→90min→OFF→3min→6min→9min
→12min→15min]SOAKING is used to
remove old or hardened dirt more
effectively.
Soaking time is about 40,60,90 minutes
(You cannot choose in WOOL , HOME
DRY, DELICATE program.).
■ Rinse :
Use it to change the frequency of rinses.
By pressing the button,
[ rinse 1 → rinse 2 → rinse 3 → rinse 4 →
rinse 5 → off → rinse 1] or
[ Spray rinse+Deep 1 → Deep 1 → Spray
rinse+Deep 2 → Deep 2→ off → Spray
rinse+Deep 1] are repeated.
When you select rinse only, the
operation starts with water supply.
NOTE
(FAVOURITE)
(DELICATE)
When rinsing or spinning only, Fuzzy is set to
[LARGE] and ECONOMY is set to [MEDIUM]
and BLANKET is set to [EX-LARGE]
automatically. Adjust the water level as needed.
ECONOMY JEAN 3
(SPEEDY)
START
PAUSE
■ Spin :
Use it to change the spinning time.
By pressing the button,
[ 6min → 8min → OFF → 1min
→ 2min → 4min →6min]
PRO GRAM
Child lock function
■ Use to lock or unlock the
control buttons to prevent
all the setting being change
by a child.
■ For locking, push both
buttons simultaneously and
for unlocking, push them
one more in washing
process.
How to select a
washing program
Start and temporary
pause
■ Use it to select washing
programs.
■ Use it to start or
pause temporarily.
■ By pressing the button, it
cycles [ FUZZY(NORMAL)→
BLANKET(DELICATE) →
ECONOMY(SPEEDY) →
JEAN → WOOL →
HOME DRY(FAVOURITE)→
FUZZY(NORMAL) ]
■ Pressing the button
repeats start and
temporary pause.
17
■ After 10 minutes in a
temporary pause
state, the power will
automatically turn
off.
3-4. WASHING PROGRAMS
Washing
Programs
AUTO OFF
Add
the laundry
1
Fuzzy Washing (Normal Wash)
Used for normal loads, this mode
automatically selects the most appropriate
conditions and completes the sequence in
one operation. The built-in sensor detects the
size of the load and the ideal wash power and
wash, rinse and spin times are set accordingly
PRO GRAM
Add
the deterg
2
·Add the appropriate
detergent as indicat
water level next to W
DETERGENT.
Or follow the deterg
manufacturer’s inst
Blanket Wash
Blankets of different size can be easily
washed.
1
3
2
5
·Select the
BLANCKET
program on the
Control panel.
Delicate Wash
Use this program for washing delicate
laundry such as lingerie, blouses etc.
1
Economy Wash (Speedy Wash)
Use this mode when washing lightly soiled
clothes for a short time. The weight should
be under 2.0kg.
1
Jean Wash
Use jeans program when washing heavy,
thick, and extremely dirty laundry such as
jeans and work outfits.
1
3
2
5
·Select the
DELICATE
program on the
Control panel.
3
2
·Select the
ECONOMY
(SPEEDY) program
on the Control panel.
3
2
·Select the JEAN
program on the
Control panel.
Wool Wash
Use this program for washing delicate fabrics
such as lingerie and woolens.
(wash only “water washable” clothes)
Before washing your woolens check the care
label for the washing instructions.(wash only
water washable clothes)
1
3
2
·Select the
WOOL program
on the Control
panel.
Homedry Wash
Use this program for clothes that have
[HOME WASH and DRY] or [WATER
WASH and DRY] tags. For homedry,
amount of laundry must be less than 1.2kg
at a time.
1
3
2
·Select the
HOMEDRY
program on the
Control panel.
18
·Use neutral deterg
appropriate for the
·When washing wo
a mild detergent
recommended for
wool.
t
START
PAUSE
Close the lid
3
antity of ·The pulsator rotates for 8 seconds to
by the
detect the laundry load.
TER·Then the water level and the amount of
detergent to be used will be shown and
water will be supplied.
ons
4
Finish
Caution & Note
·If water is already in the tub, or putting wet laundry
into the tub before starting will increase the water
level.
·Water will be supplied for 2 ·When the wash program
·With
lightweight bulky loads, water level can be set
minutes after the start of the
ends, the buzzer will ring for
low.
wash to supplement the
10 seconds before the
water the laundry has
·Changes to water temperature (hot/cold) and wash
Power goes off
absorbed.
level are possible during operation.
automatically.
5
6
6
7
·Before starting to wash, make sure that the laundry is
washable.
100% chemical Weight : the weight of
fiber with the
sheet is under 5.0kg
hand-wash tag
Possible
Blanket Stuffing : Weight
Laundry 100% Polyester about 2kg
with the
(total weight of blanket 3.5kg)
hand-wash tag Size : under approx.
2m(width) ×2.5m(breadth)
Impossible • electrical
• carpets
Laundry
blankets
·Use a nylon net for washing cashmere blankets to prevent
them floating out of the tub.
·Water may splash out when washing light laundry , such as
a cashmere blanket or bed sheet with water set at high level.
4
6
7
4
6
7
6
7
4
6
7
4
6
7
4
ndry.
s use
hing
·The water level and the amount of
detergent to be used will be shown
and water will be supplied.
19
·When setting the water level manually, do not set to MEDIUM
to prevent damage to laundry.
·Washing with hot water may damage the laundry (Water is set
to cold automatically). Ensure that the load is under 2kg
·In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing may still contain some
water. This is normal.
·Soak Wash cannot be selected for the Wool Wash program.
3-5. OTHERS FUNCTIONS
1) Soak Wash
Use this mode for washing excessively dirty laundry by soaking in water for some time to remove proteins and
fats.‘SOAK’mode can be used with all washing programs simultaneously except for WOOL and HOME DRY
program.
1
Press the AUTO OFF (Power) button to turn power on.
AUTO OFF
2
Press the PROGRAM button to select the washing program.
The SOAK will not work in WOOL and HOME DRY cleaning
Program.
PRO GRAM
3
Press the WASH button, to select SOAK program.
Keep pressing the WASH button until
the light turns on‘Soak’and‘Wash’
simultaneously as next image.
SOAK program only works when
socking time is 40, 60 or 90 minutes.
WASH
4
Add the detergent.
5
Add the laundry and press the START/PAUSE button.
SOAK
WASH
The appropriate quantity of detergent marked next to the
water level of WATER-DETERGENT.
The water level and the amount of detergent to be used will
be shown and water will be supplied.
6
Close the lid.
Water will be supplied for 2 minutes after the start of the wash
to supplement the absorbed water by the laundry.
Finish
When the wash program ends, the buzzer will ring for
10seconds before the Power goes off automatically.
Note
• Order of Soak-Wash timing
Soak-Wash
min
min
min
min
min
min
min
Lamp
Off
min
min
min
min
• Select soaking time 40minutes, 60minutes, or 90minutes (including washing time) by pressing the Wash
button repeatedly.
• If necessary, select the times of Rinse and the time for Spinning by pressing the Rinse or Spin buttons till
you reach the desired times.
20
2) Delay Start (Reservation) Wash
Delay start (Reservation) Wash is used to delay the finishing time of the operation. The hours to be
delayed can be set by the user accordingly.
The time on the display is the finishing time , not the start time.
1
Press the AUTO OFF (Power) button to turn power on.
2
Press the PROGRAM button to select the washing program.
AUTO OFF
PRO GRAM
3
• Select the program for laundry on the Control panel.
This method will not work in Wool Program.
Press the DELAY START (RESERVATION) button.
DELAY
START
• The light will ‘ DELAY’ turn on and ‘TIME LEFT’
will be marked.
• Press the button repeatedly to set the desired finishing
time. For example, To finish washing in 9 hours from
now, by make the number 9:00 pressing the DELAY
START (RESERVATION ) button repeatedly.
(RES.=DELAY)
4
Add the detergent.
5
Add the laundry and press the START/PAUSE button.
SOAK
DELAY
WASH
SPRAY
RINSE
SPIN
SOAK
INLET Er.
DELAY
DRAIN Er.
TIME
LEFT
DOOR Er.
SPIN Er.
WASH
SPRAY
RINSE
SPIN
INLET Er.
DRAIN Er.
TIME
LEFT
DOOR Er.
SPIN Er.
• The appropriate quantity of detergent marked next to the water
level of WATER-DETERGENT.
• When the lid is open the machine will not operate, and an alarm
signal will remind you to close the lid.
• When you press the START/PAUSE button the light will blink
and the time will be shown.
6
Close the lid.
• Water will be supplied for 2 minutes after the start of the
wash to supplement the water the laundry has absorbed.
Finish
The washing will be finished according to the delayed time.
Note
• Finishing time can be delayed from 3~48 hours. Delaying from3~12 hours can be done in 1 hour time intervals
and from 12~48 hours in 2 hour time intervals.
• If the lid is open, the machine will not work, and an alarm signal will alarm to remind you to close the lid.
• To select washing time, rinsing times, spinning time, water level, hot/cold or wash power manually, press the
DELAY START (RESERVATION) button and select the desired option. Then press the START/PAUSE button.
• When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the spinning
program . (The laundry will be wrinkled if left for a long time after spinning.)
21
3) Option Washing
When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually.
1
Press the AUTO OFF (Power) button to turn power on.
AUTO OFF
2
Only Wash
Only Wash,Rinse
Press the WASH button to select the
desired timing.
Press the WASH button to select the
desired timing.
WASH
Press the RINSE button to select the
desired times of rinse.
WASH
RINSE
You can use this option for preventing
wrinkles of laundry
3
Press the WATER LEVEL button, to control the water level according to
the amount of laundry. If you do not choose anything, it is set the middle
water level automatically.
4
Add the laundry into the washing tub.
5
Press the START/PAUSE button.
6
Add the detergent and close the lid.
22
3) Option Washing
1
Press the AUTO OFF (Power) button to turn power on.
AUTO OFF
2
Only Rinse
Press the RINSE button
to select the desired
times of rinse.
Only Rinse,Spin
Press the RINSE button to
select the desired times of
rinse.
Only Spin/Only drain
Press the SPIN button to
select the desired times
of rinse.
RINSE
RINSE
PRO GRAM
Press the SPIN button to
select the desired times of
rinse.
SPIN
3
Press the WATER LEVEL button to control the water
level according to the amount of laundry.
4
Add the laundry into the washing tub.
5
Press the START/PAUSE button.
6
Add the detergent and close the lid.
When you want to only
drain, wait until the water
in the washing tub drains
completely.
Note
When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not
be drained off. If you wish to drain the water, press SPIN button and wait until the water in the tub has drained
completely. Then press the START/PAUSE button.
If you do not specify the water level, then Medium will be automatically selected.
If only Rinse is selected, the process will start from Water Supply.
23
4) Child Lock Function
If you want to lock all the keys to prevent all the setting from being changed by a child, you can use the child lock
option.
How to Lock
1
Press the AUTO OFF(Power) button.
AUTO OFF
2
Turn Power on.
Press the START/PAUSE button to start washing.
After all washing conditions are set according to the manual.
3
Press both the WASH button and the RINSE button simultaneously.
SHOWER
(SPRAY)
DELAY
During the wash program, all the buttons are locked until
washing is completed or it is child- lock
function is deactivated manually.
How to Unlock
If you want to unlock during wash, press both the WASH and the RINSE button simultaneously again.
Note
“
” & the remaining time are alternatively shown on the display while they are locked.
Mute Option
If you want to use the washing machine without alarm signal sounds, press both the WASH and
SPIN buttons simultaneously.
To make buzzer work, press both the WASH and SPIN buttons simultaneously one more time.
Seeing Remaining Time
To see the remaining time for each process, press one of the WASH, RINSE and SPIN buttons.
The remaining time for each process will appear for about 1 second.
24
3-6. CARE AND MAINTENANCE
When there is a fear of freezing
• Close the water taps and remove the Water Supply Hose.
• Remove the water which remains in the water supply.
• Lower the drain hose and drain the water in the bowl and the drain hose by spinning.
If frozen
• Remove the water supply hose, and immerse it in hot water at approx.. 40˚C.
• Pour approx.. 2 liters of hot water at approx.. 40˚C, into the bowl and let it stand for 10 minutes.
• Connect the water supply hose to the water tap and confirm that the washing machine performs
the supply and drainage of water.
Wash Inner-tub
Leave the lid open after washing to allow moisture to evaporate. If you want to clean
the inner-tub use a clean soft cloth dampened with liquid detergent, then rinse. (Do
not use harsh or gritty cleaners.)
Inlet Hoses
Exterior
Hoses connecting washer to faucet should be replaced every 5 years.
Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with
sharp objects.
Long Vacations
Be sure water supply is shut off at faucets. Drain all water from hoses if weather will
be below freezing.
Cleaning the Inside of your Washer
If you use fabric softener or do regular cold water washing, it is very important that you occasionally
clean the inside of your washer.
• Fill your washer with hot water.
• Add about two cups of a powdered detergent that contains phosphate.
• Let it operate for several minutes.
• Stop the washer, open the lid and leave it to soak overnight.
• After soaking, drain the washer and run it through a normal cycle.
We do not recommend that you wash clothes during this procedure.
25
4. SERVICE INFORMATION
4-1. SCHEMETIC DIAGRAM
1) WF-T10(~3)0(~2,6)1(~5)TP(H,E,F)(S,3) / WF-T802/T852(A)
26
2) WF-T(F/C)1091~3, 1191~3T(C/H/P) / WF-T(F/C)1022,1122,1001T(C/H/P)
WF-T1268TH, 2409KTb, 2602kTa, T1491TP, WF-T1491TP, T11292TP, T1292TP,T1291TP,
LA-1499ST, WF-T1081TP, T1592TP, T1593TP, T1241TP, T1133TH
WF-G15KTB, G13KTC, B15KTB, B13KTC / WF-T1400TH, T1022TPX
A
27
4-2. WIRING DIAGRAM
1) WF-T10(~3)0(~2,6)1(~5)TP(H,E,F)(S,3) / WF-T802/T852(A)/T853A
2) WF-T(F/C)1091~3, 1191~3T(C/H/P) / WF-T(F/C)1022,1122,1001T(C/H/P)
WF-T1268TH, 2409KTb, 2602kTa, T1491TP, T1081TP, WF-T1491TP, T11292TP,
T1292TP,T1291TP, LA1499ST, T1592TP, T1593TP, T1241TP, T1133TH
WF-G15KTB, G13KTC, B15KTB, B13KTC / WF-T1400TH, T1022TPX
28
4-3. PROGRAM TIME CHART
1) WF-T10(~3)0(~2,6)1(~5) Series Program chart
Intermittent Spin
High Speed Spin
No Power Spin
Water Supply
Rinsing
Drain
Intermittent Spin
High Speed Spin
No Power Spin
Water Supply
Rinsing
Drain
Intermittent Spin
High Speed Spin
No Power Spin
Power Off
Spin
Drain
2nd Deep Rinse
Washing
1st Deep Rinse
Water Supply
Wash
Fuzzy
Ex-large
ExL-L
Large
L-M
Medium
M-S
Small
7
6
6
5
5
4
3
15
15
15
12
12
9
9
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
90"
90"
90"
90"
90"
90"
90"
165"
140"
140"
120"
120"
100"
100"
7
6
6
5
5
4
3
3
3
3
3
3
3
3
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
90"
90"
90"
90"
90"
90"
90"
165"
140"
140"
120"
120"
100"
100"
7
6
6
5
5
4
3
3
3
3
3
3
3
3
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
8
8
6
6
6
4
4
165"
140"
140"
120"
120"
100"
100"
10"
10"
10"
10"
10"
10"
10"
Economy
Ex-large
ExL-L
Large
L-M
Medium
M-S
Small
7
6
6
5
5
4
3
9
9
9
9
9
9
9
-
-
-
-
-
-
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
90"
90"
90"
90"
90"
90"
90"
165"
140"
140"
120"
120"
100"
100"
7
6
6
5
5
4
3
3
3
3
3
3
3
3
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
4
4
4
4
4
4
4
165"
140"
140"
120"
120"
100"
100"
10"
10"
10"
10"
10"
10"
10"
Blanket
Ex-large
ExL-L
Large
L-M
Medium
M-S
Small
7
6
6
5
5
4
3
18
18
18
18
18
18
18
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
90"
90"
90"
90"
90"
90"
90"
165"
140"
140"
120"
120"
100"
100"
7
6
6
5
5
4
3
3
3
3
3
3
3
3
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
90"
90"
90"
90"
90"
90"
90"
165"
140"
140"
120"
120"
100"
100"
7
6
6
5
5
4
3
3
3
3
3
3
3
3
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
8
8
8
8
8
8
8
165"
140"
140"
120"
120"
100"
100"
10"
10"
10"
10"
10"
10"
10"
Jean
Ex-large
ExL-L
Large
L-M
Medium
M-S
Small
7
6
6
5
5
4
3
15
15
15
15
15
15
15
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
90"
90"
90"
90"
90"
90"
90"
165"
140"
140"
120"
120"
100"
100"
7
6
6
5
5
4
3
3
3
3
3
3
3
3
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
90"
90"
90"
90"
90"
90"
90"
165"
140"
140"
120"
120"
100"
100"
7
6
6
5
5
4
3
3
3
3
3
3
3
3
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
8
8
6
6
6
4
4
165"
140"
140"
120"
120"
100"
100"
10"
10"
10"
10"
10"
10"
10"
Wool
Ex-large
ExL-L
Large
L-M
Medium
M-S
Small
7
6
6
5
5
4
3
3
3
3
3
3
3
3
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
-
100"
100"
100"
100"
100"
100"
100"
7
6
6
5
5
4
3
3
3
3
3
3
3
3
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
-
100"
100"
100"
100"
100"
100"
100"
7
6
6
5
5
4
3
3
3
3
3
3
3
3
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
-
100"
100"
100"
100"
100"
100"
100"
10"
10"
10"
10"
10"
10"
10"
Ex-large
ExL-L
Large
L-M
Medium
M-S
Small
7
6
6
5
5
4
3
6
6
6
6
6
6
6
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
-
100"
100"
100"
100"
100"
100"
100"
7
6
6
5
5
4
3
3
3
3
3
3
3
3
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
-
100"
100"
100"
100"
100"
100"
100"
7
6
6
5
5
4
3
3
3
3
3
3
3
3
4
4
4
3
3
3
3
130"
130"
100"
100"
100"
55"
55"
-
100"
100"
100"
100"
100"
100"
100"
10"
10"
10"
10"
10"
10"
10"
Home Dry
WASH OPTION
Wash Time
Rinse Times
Spin Time
3,6,9,12,15,18,21,25min
1,2,3,4,5Times
1,2,4,6,8min
* No Power Spin : Spin by remained power
* Time Unit is minute in the chart (34" : 34 second)
* Total time for full process can be changeable depending on the water pressure.
29
Default
Default
Default
Default
30
Ex-large
ExL-L
Large
L-M
Medium
M-S
Small
Ex-large
ExL-L
Large
L-M
Medium
M-S
Small
Ex-large
ExL-L
Large
L-M
Medium
M-S
Small
Ex-large
ExL-L
Large
L-M
Medium
M-S
Small
Speedy
Jean
Wool
Delicate
Water Supply
Washing
6
6
6
6
6
6
6
3
3
3
3
3
3
3
21
21
15
15
15
9
9
6
6
6
6
6
6
6
21
21
15
15
15
9
9
Drain
4
4
4
3
3
3
3
4
4
4
3
3
3
3
4
4
4
3
3
3
3
-
4
4
4
3
3
3
3
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
-
128"
128"
128"
128"
128"
128"
128"
Intermittent Spin
3,6,9,12,15,18,21,25min
1,2,4,6,8min
7
6
6
5
5
4
3
7
6
6
5
5
4
3
7
6
6
5
5
4
3
7
6
6
5
5
4
3
7
6
6
5
5
4
3
No Power Spin
-
-
-
-
2
2
2
1.5
1.5
1.5
1.5
Rotate Shower
-
-
-
-
1.5
1.5
1
1
45"
45"
45"
Drain
-
-
-
-
4
4
4
3
3
3
3
Intermittent Spin
-
-
-
-
128"
128"
128"
128"
128"
128"
128"
High Speed Spin
-
-
2
2
2
2
2
2
2
-
20"
20"
20"
20"
20"
20"
20"
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1.5
1.5
1.5
1.5
-
2
2
2
1.5
1.5
1.5
1.5
No Power Spin
* No Power Spin : Spin by remained power
* Time Unit is minute in the chart (34" : 34 second)
* Total time for full process can be changeable depending on the water pressure.
WASH OPTION
Wash Time
Spin Time
Ex-large
ExL-L
Large
L-M
Medium
M-S
Small
Normal
Water Supply
7
6
6
5
5
4
3
7
6
6
5
5
4
3
7
6
6
5
5
4
3
-
7
6
6
5
5
4
3
Rinsing
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
-
3
3
3
3
3
3
3
Drain
4
4
4
3
3
3
3
4
4
4
3
3
3
3
4
4
4
3
3
3
3
4
4
4
3
3
3
3
4
4
4
3
3
3
3
Intermittent Spin
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
-
-
-
-
-
-
-
-
2
2
2
2
2
2
2
20"
20"
20"
20"
20"
20"
20"
2
2
2
2
2
2
2
High Speed Spin
2nd Deep Rinse
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1.5
1.5
1.5
1.5
2
2
2
2
2
2
2
2
2
2
1.5
1.5
1.5
1.5
No Power Spin
1st Deep Rinse
Water Supply
7
6
6
5
5
4
3
7
6
6
5
5
4
3
7
6
6
5
5
4
3
7
6
6
5
5
4
3
7
6
6
5
5
4
3
Rinsing
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
Drain
4
4
4
3
3
3
3
4
4
4
3
3
3
3
4
4
4
3
3
3
3
4
4
4
3
3
3
3
4
4
4
3
3
3
3
Intermittent Spin
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
225"
Spin
-
-
-
-
-
-
-
-
6
6
4
4
4
2
2
2
2
2
2
2
2
2
6
6
4
4
4
2
2
High Speed Spin
Wash
No Power Spin
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2.5
2
2
2
1.5
1.5
1.5
2
2
2
2
2
2
2
2.5
2
2
2
1.5
1.5
1.5
Power Off
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
Default
Default
Default
2) WF-T852(A) Program chart
31
Extreme-Large
Ex-large
ExL-L
Large
L-M
Medium
M-S
Small
Extreme-Large
Ex-large
ExL-L
Large
L-M
Medium
M-S
Small
Wool
Delicate
Water Suply
7
7
6
6
5
5
4
3
7
7
6
6
5
5
4
3
7
7
6
6
5
5
4
3
7
7
6
6
5
5
4
3
7
7
6
6
5
5
4
3
Washing
10
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
15
18
18
18
18
15
10
5
6
6
6
6
6
6
6
6
15
18
18
18
18
15
10
5
Drain
4
4
4
4
3
3
3
3
4
4
4
4
3
3
3
3
4
4
4
4
3
3
3
3
-
4
4
4
4
3
3
3
3
Intermittent Spin
135"
194"
194"
194"
194"
194"
194"
194"
135"
194"
194"
194"
194"
194"
194"
194"
135"
194"
194"
194"
194"
194"
194"
194"
-
135"
135"
135"
135"
135"
135"
135"
135"
No Power Spin
-
-
-
-
2
2
2
2
1.5
1.5
1.5
1.5
Rotate Shower
-
-
-
-
30"
30"
30"
30"
30"
30"
30"
30"
Drain
-
-
-
-
4
4
4
4
3
3
3
3
Intermittent Spin
-
-
-
-
128"
128"
128"
128"
128"
128"
128"
128"
-
-
20"
2
2
2
2
2
2
2
-
20"
20"
20"
20"
20"
20"
20"
20"
High Speed Spin
* No Power Spin : Spin by remained power
* Time Unit is minute in the chart (34" : 34 second)
* Total time for full process can be changeable depending on the water pressure.
Extreme-Large
Ex-large
ExL-L
Large
L-M
Medium
M-S
Small
Extreme-Large
Ex-large
ExL-L
Large
L-M
Medium
M-S
Small
Speedy
Jean
Extreme-Large
Ex-large
ExL-L
Large
L-M
Medium
M-S
Small
Normal
No Power Spin
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1.5
1.5
1.5
1.5
-
2
2
2
2
1.5
1.5
1.5
1.5
Water Suply
7
7
6
6
5
5
4
3
7
7
6
6
5
5
4
3
7
7
6
6
5
5
4
3
-
7
7
6
6
5
5
4
3
Rinsing
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
-
3
3
3
3
3
3
3
3
Drain
4
4
4
4
3
3
3
3
4
4
4
4
3
3
3
3
4
4
4
4
3
3
3
3
4
4
4
4
3
3
3
3
4
4
4
4
3
3
3
3
Intermittent Spin
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
-
-
-
2
-
2
-
2
2
2
2
2
2
2
2
2
20"
20"
20"
20"
20"
20"
20"
2
2
2
2
2
2
2
2
High Speed Spin
2nd Deep Rinse
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1.5
1.5
1.5
1.5
2
2
2
2
2
2
2
2
2
2
2
2
1.5
1.5
1.5
1.5
No Power Spin
1st Deep Rinse
Water Suply
7
7
6
6
5
5
4
3
7
7
6
6
5
5
4
3
7
7
6
6
5
5
4
3
7
7
6
6
5
5
4
3
7
7
6
6
5
5
4
3
Rinsing
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
Drain
4
4
4
4
3
3
3
3
4
4
4
4
3
3
3
3
4
4
4
4
3
3
3
3
4
4
4
4
3
3
3
3
4
4
4
4
3
3
3
3
Intermittent Spin
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
194"
Spin
5
-
5
-
5
5
5
5
5
5
3
3
5
3
3
3
3
3
3
3
5
5
5
5
5
5
3
3
High Speed Spin
Wash
No Power Spin
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2.5
2
2
2
1.5
1.5
1.5
2
2
2
2
2
2
2
2
2
2.5
2
2
2
1.5
1.5
1.5
Power Off
10"
10"
10"
10" Default
10"
10"
10"
10"
10"
10"
10"
10" Default
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
3) WF-T(F/C)1091~3, 1191~3T(C/H/P) / WF-T(F/C)1022,1122,1001T(C/H/P)
WF-T1268TH, 2409KTb, 2602kTa, T1491TP, T1081TP, LA-1499ST
WF-T1491TP, T11292TP, T1292TP, T1291TP, T853A, T1592TP, T1593TP, T1241TP, T1133TH
WF-G15KTB, G13KTC, B15KTB, B13KTC / WF-T1400TH, T1022TPX
4-4. ADJUSTMENT
1) BRAKE LEVER ADJUSTMENT
Brake lever
Keep the clearance
1.9 0.1mm between
the tip of the adjustment
screw and brake lever.
Lock net
Adjustment
screw
Clutch lever
Brake lever bar
• Shown as in the figure, untighten the adjustment
screw to keep clearance less than 1.9±0.1mm
between the tip and the brake lever.
And turn on the lock nut then paint it red.
■ CAUTION.
CAUTION
• Painting part is adjusted in factory, it does not
need adjusting.
• Adjust the screw properly if the brake doesn't
work during spin.
.5
2.0~3
mm
2) KEEPING CLEARANCE
P.V Link
Brake lever
• Keep the clearance about 2.0~3.5mm between
brake lever and P.V link as shown in the figure.
CAUTION
Motor Pulley
Clutch lever
3) V-BELT ADJUSTMENT
1
2
• Clutch pulley must be turning to one side P.V
Link is pulling the brake Lever.
• Clutch pulley must be turning to the left and the
right when P.V Linke does not pull the brake
Lever.
Motor Pulley
• Adjust the motor pulley by pushing the motor like
arrow ①, to make V-belt tension parallel when
pushed at the point of arrow .
CAUTION
2
Clutch Pulley
• When the V-belt is not properly adjusted, the
motor will not be running or the belt will be
slipping.
32
4-5. DISASSEMBLY INSTRUCTION
▶ Be sure to unplug the power to repair and replace
electric parts.
CAUTION FOR ELECTROSTATICS
Be sure to make earth connection for trouble
diagnosis and parts replacement. If impossible,
touch earth wire on the body to remove electric
deviation between the body and product before
work.
Screw cap
1) Disassembly of Front Panel & PCB
Assembly
Remove two screw caps using a sharp tool and two
special screws.
Special
screw
Push the front panel to the left side then pull it out
Disconnect the leads from the controller
Panel
Remove 4 screw from the front panel
Remove the PCB Assembly.
Leads
PCB
Assembly
33
2) Disassembly of Back Panel, Power
Cord, Inlet Valve & BP Sensor
Remove two back panel fixing screws in the back
side.
Back
panel
Disassemble the back panel.
Disconnect two connectors and disassemble the
power cord.
Inlet valve ass'y
Remove a valve fixing screw & disconnect the
leads form the inlet valve.
Remove the inlet valve.
Disconnect the leads & the pressure tube from the
BP sensor.
Fuse holder
Fuse
Remove the BP sensor.
Fuse is located in the Fuse holder.
For fuse replacement use the following rated fuse
* Rating of fuse
- 250V 6A fusing type for 220-240V product
- 125V 12A fusing type for 100-127V product
B.P Sensor
Power
Cord
Q-spring
3) Disassembly of Lid Assembly, Top
Cover, Tub Cover, Pulsator & Inner Tub
Remove Q-spring & two hinge pins then
disassemble the lid assembly
Remove two top cover fixing screws in the rear
then disassemble the top cover.
Remove tub cover fixing screws then disassemble
the tub cover.
Remove the pulsator fixing screw then disassemble
the pulsator.
Remove the hub fixing nut by a special tool.
Hinge Pin
Disassemble the inner tub.
Hinge Pin
34
tub cover
inner
tub
pulsator
Hub fixing nut
4) Disassembly of Back Cover, Drain
Pump, Clutch(Transmission) & Motor
Leads Pump
fixing
screw
Remove back cover fixing screws then
disassemble the back cover.
Disconnect the leads and the drain hose-p from the
drain pump.
Remove the pump fixing screws then disassemble
the drain pump.
Fall down the washer for clutch & motor removal.
Remove the belt.
Disassemble the clutch.
Remove two motor fixing screws then disassemble
the motor.
Drain hose-p
5) Replacement of Damper asm
Separate top cover from washing machine.
As in the fig, lift snubber bar and take it out of out
case with out tub.
Damper assembly shall not be disassembled.
Replace damper as assembly.
For assembly, keep the following.(Location & color)
C
B
D
A
FRONT
35
Location
P/No.
PIVOT(Color)
A , B
A051
MIDDLE BLUE
C , D
A052
WHITE
4-6. TEST RUNNING WITHOUT WATER
1) METHOD TO USE QC TEST MODE
▶ To use check program (QC test mode), power ON with water temperature and water level.
Key pressed in non-load empty water.
No.
1
Check points
LED
and
Pressure
Check method
Start/Pause
KEY PUSH Press
Load
Begining point
Buzz once
Sensor
LEVEL
sensor
displayed.
Frequency
display
•Pulsator
rotates to
left four
times and
right four
times.
(check level)
2
Motor
3 Cold water valve
4
Hot water valve
5
Shower valve
Press once
Press twice
Normal condition
•Cold
valve
starts.
Errorr
Remedy
-
•Check pressure
S/W assembly.
•Check connector.
Display
•LED on all
•No.200 displayed
•No.264~270 is
•Replace
controller's IC3.
•No.70~125 is
displayed.
50Hz
•Check in unload
condition.
•Check connector.
•Check driving
part (Motor,
Clutch, V-belt,
Capacitor).
60Hz
-
Press three time •Hot water
valve
starts
Press four times
•Shower
valve
starts
-
•Top filter of supply
valve is clogged
with dregs.
•Check connector.
Check if TR3(hot)
TR4(cool) and
TR5(shower) are
ON in load driving
Part of connector
asm.
6 Check drain valve Press five times •Drain valve
ON(Turbo
Drum).
•Check door.
Door •Check drain hose
error
and drain motor.
(Buzz •Check connector.
continued) •Check TR6 in
controller asm.
Press Six times •Drain Pump
ON
•Drain Valve
ON
•Check drain pump
•Check TR8 in
controller asm.
•Check connector.
7
Check the drain
Pump.
8 Check the AUTO Press Seven times •Power off
OFF switch.
within 1
sec.
•LED off
36
4-7. TROUBLE SHOOTING AGAINST COMMON WASHING PROBLEMS
Many washing problems involve poor soil & stain removal, residues of lint and scum,
and fabric damage. For satisfactory washing results, follow these instructions.
WASH PROBLEM
Problems
Solutions & Preventive Measures
Possible Causes
Poor soil
removal
• Not enough detergent
• Wash water temperature
too low.
• Overloading the washer
• Incorrect wash cycle
• Incorrect sorting
• Do not pretreat stain
• Use correct amount of detergent for load size, amount of soil
and water hardness.
• Use warm or hot water for normal soil.
Different water temperature may be required according to soil
type. (refer to page 12)
• Reduce load size.
• Wash with Jean or Soak(Turbo) & Jean wash cycle for heavy
soiled laundry.
• Separate heavily soiled items from lightly soiled ones.
• Pretreat stain and heavy soil according to directions shown on
page 11.
Blue Stains
• Undiluted fabric softener
dispensed directly onto
fabric
• Rub the stain with bar soap. Wash.
• Do not overfill fabric softener dispenser and do not pour liquid
fabric softener directly onto fabric.
See page 14 for more instructions.
Black or gray
marks on
clothes
• A buildup caused by the
interaction of fabric
softener and detergent can
flake off and mark clothes
• Not enough detergent
Yellow or
brown rust
stains
• Iron or manganese in
water supply, water pipes,
or water heater
Lint
• Incorrect sorting
• Tissues left in pocket
• Overloading the washer
• Wash lint givers eg towels, flannelette sheets, separately from lint
collectors eg synthetic fabrics and remove tissues in pockets
before wash. See page 11 for sorting and caring before loading.
• Do not overload the washer
Residue or
detergent
• Overloading the washer
• Undissolved detergent
• Use too much detergent
• Do not overload the washer.
• Some detergents need to be pre-dissolved, check the detergent
instructions. Try pre-dissolving the detergent.
• Increase water temperature using hot water safe for fabric.
• Use proper amount of detergent.
Holes, tears,
or snags
• Incorrect use of chlorine
bleach.
• Unfastened zippers,
hooks, buckles
• Ribs, tears and broken
threads
• Overloading the washer
• Degradation of fabric
• Never pour chlorine bleach directly on fabric.
See page 13 for adding liquid bleach.
• Fasten zippers, hooks, and buckles.
• Remove objects in pockets. See page 11 for caring before
loading.
• Do not overload the washer.
• Keep the recommendations against Scrud(waxy buildup). (refer
to scrud page14.)
• Use correct amount of detergent for load size, amount of soil
and water hardness.
• To restore discolored load of whites, use rust remover safe for
fabric.
• Install nonprecipitating water softener or an iron filter in your
water supply system for an ongoing problem.
• Before washing, run water for a few minutes to clear lines.
37
4-8. TROUBLE SHOOTING METHODS ACCORDING TO ERROR MESSAGE
▶ For more detailed information for trouble shooting refer to page 38 to 49.
Error
INLET Er
lamp blinks.
Determination
Water supply doesn't
reach set level within
60 minutes.
Expected cause
Remedy
1. Locked or frozen water tap.
• Open water tappet for water
supply.
2. Obstructed water supply.
• Wash at supply condition.
3. Top filter of supply valve is
clogged with dregs.
• Clean or chunge filter.
4. Connector of supply valve is
• Reconnect connector or
disassembleed or wrongly
adjust wrong contact.
contacted.
5. Yellow 2 pin connector of
controller ASM is
disassembled or wrongly
contacted.
• Reconnect connector and
adjust wrong contact.
6. TR3 (hot), TR4 (cool), TR5 • Check load drive parts of
(shower) are not ON at load TR3, TR4 and TR5, and
drive part of controller ASM. replace related parts.
7. Drain hose is not
hung up.(Pump Model)
• Hung up drain hose.
1.Drain hose is not put down
(Non Pump Model)
• Put down drain hose properly.
(0.9~1.3m high)
2. Drain hose is bent or
clogged (Frozen or clogged • Clean clogged drain hose.
with dregs).
DRAIN Er
lamp blinks.
When drain is not
finished within 12
minutes at drain
course.
3. Connector of drain motor or
white 2 pin connector of
controller ASM is
disassembleed or wrongly
contacted.
• Reconnect connector and
adjust wrong contact.
4. Wrong drain motor (As AC
220V is applied to both ends
• Replace drain motor.
of drain motor, the link
opens the drain valve.)
5. TR8 is not ON at load drive
part of controller ASM.
• Check load drive part of TR8.
Replace related parts.
6. Wrong drain pump.
(Pump Model)
• Check drain pump.
7. Drain hose is hung up highly • Hang up drain hose properly
(over 1.3m)
(0.9~1.3m high)
38
Error
SPIN Er
lamp blinks.
Determination
Unbalanced water for
spin procedure.
Expected cause
Remedy
1. Water is partially filled in
inner tub asm.
• Fill water evenly into inner tub
asm.(horizontally)
2. Machine is slopped (Check
drop position of leveller).
• Adjust machine height
horizontally.
3. Safety switch is too closer to • Check and replace safety
inner tub asm or safety
switch.
switch contacted wrongly.
4. Is the CONNECTOR of Ball • Check B.P SENSOR
Pressure Sensor
CONNECTOR or replace B.P
disconnected or badly
sensor
touched?
DOOR Er
Opened lid during
lamp blinks and
washing procedure.
continuous
(wash, rinse and spin)
buzz
Opened lid during
delay finish program.
1. Lid is opened during all
washing procedure.
• Close lid.
2. Lid is opened during
reservation program.
• Close lid.
3. Connector of safety switch
or violet (VI) 2 pin of
controller asm is
disassembled or left wrong
contact.
• Connect connector again or
adjust wrong contact.
4. The safety switch is wrong.
(It is ON in case of the lid
closed.)
• Check and replace safety
switch.
5. Ball Pressure Sensor is bad • Check and replace Ball
or bad contact.
Pressure Sensor.
displayed.
Frequency generated 1. The connector of Ball
Pressure Sensor (Pressure • Connect connector again and
by recognizing water
adjust wrong contact.
Switch) or the blue 3 pin
level at pressure
connector of the controller
ASM is disassembled or
switch is out of
connected wrongly.
reference value (below
2. Wrong Ball Pressure Sensor • Replace Ball Pressure
15kHz)
(Pressure Switch).
Sensor (Pressure Switch).
3. Wrong controller asm.
displayed.
Frequency generated 1. Defect of inlet valve.
by recognizing water
level at pressure switch 2. Defect of PWB asm.
is out of reference
value (below 22KHz)
39
• Replace controller asm.
• Replace the inlet valve.
• Replace the PWB asm.
4-9. HOW TO DIAGNOSE AND REPAIR BY SYMPTOM
1) Washer is not energized.
Where, what & how to check?
Result of Check
Possible Cause
How to repair & settle
Household Power supply
Change the electrical.
1. Check whether connection between
the plug and the electrical is poor
Poor
Defect of the
electrical
2. Measure voltage of the electrical.
Around rating
No defect
0V
Defect of household
power supply
1. Measure resistance between both
ends of the power supply cord with
both the plug pins short-circuited.
Less than 1Ω
∞Ω
No defect
2. Check whether every connector in
the bundle of connectors has a
good connection.
Male & female
connectors
separated
Poor connection.
Remove the cause to
give strain and
reconnect them.
∞Ω
Wire is opened.
Change the lead wire.
Call for power supply
company
Wiring of the Washer
3. Check resistance of every wire to
find out a open wire.
Open circuit of the Change the power
power supply cord
supply cord.
Electrical component
Less than 0.5Ω
1. Check resistance with power relay
switch turned on
More than 1.0Ω
No defect
Poor contact
2. Check the secondary voltage of the
transfomer.
10~14V
0V
No defect
Coil is open
∞ Ω and
motor is hot
T.P blown out
Remove cause to
overload the motor
Defect of the fuse
Change the fuse.
CAUTION
Check the fuse rating
AC100~127V:125V 12A
AC220~240V:250V 6A
3. Measure resistance to check
whether the T.P of the motor is
blown out.
4. Check whether the fuse is open.
Open
Change the Auto Off
Switch
Change the
transfomerformer.
Controller
If there are no defects in the above,
it should be defect of the controller.
Over 120%
voltage than
rating check
If supply voltage is 120% higher than
rating the varistar in the controller may
be broken. Check supply voltage.
40
Change the controller
if all the electrical parts
have no defects.
2) Defects on displaying function
Where, what & how to check?
Result of Check
Possible Cause
How to repair & settle
Main voltage
1. Measure mains voltage at the wall
outlet
Less than 85% Low voltage.
of the rating.
To explain that it is
caused by low voltage in
electric supply and
recommend using a
transfomer if voltage has
been continuously low.
2. Meaure voltage at the extended
outlet that the washer is plugged in
if the extended outlet is used and
voltage at the electrical outlet
is normal in the above.
Less than 85% The dia of the lead
of the rating
wire is smaller or
many loads are
connected at the
same outlet
To use a transfomer
having a enough
capacity if using
a transfomer.
Transfomer
1. Measure the secondary voltage of
the transfomer.
Less than
AC 10V
Defect of the
transfomer.
Change the controller.
Defect of controller.
Change the controller.
Controller
1. Defect of LED.
2. Defect of LED driving circuit.
3. Defect of micom.
3) Reset During operation
Where, what & how to check?
Result of Check
Possible Cause
How to repair & settle
Mains Voltage
1. Measure voltage of the outlet that the
washer is plugged into during wash and
spin.
Less than
Mains voltage is too
80% of the rating. low or size of a lead
wire is too small.
External noise
inrushed.
2. Reset symptom happens at specific
time zone repeatedly.
3. Check whether a transfomerlent
power cut happens.
(Fluorescent lamp is
transfomeriently blinked.)
Explain that it is caused
by low voltage in electric
mains and recommend
using a suitable size of
leads.
Explain it is caused by
using environment.
(It happens when
equipment with high
frequency is used
around)
Explain it is a problem of
electric supply
environment.
41
3) Reset during operation
Where, what & how to check?
Result of Check
Possible Cause
How to repair & settle
Drain Motor
1. Operate washer setting spin only,
then press the start/pause button
when the wash motor starts to work
and then press the start/pause
button again in order for the drain
motor to work intermittently.
Reset happens Defect of the drain
after the drain motor (A noise
motor works.
generated when the
internal relay
works.)
Change the drain motor
Controller
Change the controller.
1. If mains voltage and the drain motor
have no defects a defect of the
controller is highly possible.
4) Water doesn’t come into the wash tub.
Where, what & how to check?
Result of Check
Possible Cause
How to repair & settle
Inlet Valve
1. If water doesn’t come though the
inlet valve works(electric sound
occurs)
1) Check whether water mains is cut.
Water mains cut.
Mains cut.
Explain.
2) Check whether tabs are turned on.
Don’t tumed on.
Mistake of use.
Turn on the tap.
3) Hot & cold tab are opposite
connected.
Connected
opposite.
Wrong installation.
Correct their locations
and turn on the tap.
4) Wrongly select water temperature
option.
Selected
opposite.
Mistake of use.
Explain how to use.
5) If there are no problems in the
above, check the inlet valve filters
after disconnecting the water supply
hoses.
Filters blocked
by foreign
substance.
Don’t clean.
Clean them by brush
and explain cleaning
regulary them.
Defect of the
inlet valve.
Change the inlet valve.
A connector is
taken off.
Defect of contact.
Reconnect it or remove
the causes to make poor
connection.
∞Ω
Coil is open
Change the inlet valve.
6) If there are no problems in the
above a diaphragm hole in the valve
is blocked by foreign substance or
the plunger in it is locked.
2. If the inlet valve doesn’t work(there
is no electric sound)during filling
cycle.
1) Check whether it’s connectors are
taken off or they have poor
connection.
2) Check resistance of the inlet valve.
42
4) Water doesn’t come into the wash bowl.
Where, what & how to check?
Ball Pressure Sensor
(Pressure Switch)
1. Is there PE error on the display
which means Ball Pressure Senosr
(Pressure Switch) error
2. Check frequency of the Ball
Pressure Sensor(Pressure Switch)
without load if wash is proceeding
without filling.
Result of Check
Possible Cause
How to repair & settle
PE Error
displayed.
Connector is taken
off, or lead or coil is
open.
Reconnect the connector
or change leads. Change
the Ball Pressure Sensor
(Pressure Switch)
if coil is open.
Less then
26.2kHz
Defect of the Ball
Pressure Sensor
(Pressure Switch)
Change the
Ball Pressure Sensor
(Pressure Switch).
Controller
1. Defect of controller is highly possible
if inlet valve and Ball Pressure
Sensor have no defects in the
above.
Change the controller.
5) Water fills continuously or intermittently.
Where, what & how to check?
Result of Check
Possible Cause
How to repair & settle
Wrong Installation/Leakage
1. Check whether the drain hose is
laying down on the floor.
(For pump model)
Drain hose
laying down.
Wrong installation.
The drain hose should be
hung on the
stand-pipe or the tub.
Change the part.
2. Check where water leaks.
Ball Pressure Sensor
(Pressure Switch)
1. Check the pulsator is rotating when
water fills continuously.
2. If there is no defect in the Ball
Pressure Sensor(Pressure Switch),
check whether the air hole of the outer
tub is blocked.
Water leaks
from a part.
Defect of the part.
Repair it.
It doesn’t
rotate.
Water pressure is not Check the tube of the
Ball Pressure Sensor
sensed.
(Pressure Switch), it is
bent or blocked, repair
that.
Blocked.
Air hole blocked.
Water fills.
Defect of the inlet
valve.
Change the inlet valve.
Short circuit of the
triac of the
controller.
Change the controller.
Repair the blocked hole.
Inlet Valve
1. Does water fills even though it is not
energized (power is off)?
Controller
1. Does water fill immediately after the
power switch turns on before pushing
the start/pause button.
43
6) Pulsator doesn’t rotate normally.
Where, what & how to check?
Result of Check
Pulsator rotates at one
direction.
1. The Pulsator rotates normally at the
beginning of wash cycle, but is it not
rotate at clockwise direction (locked)
after some wash cycles though there
is motor-working sound?
Clockwise
rotation locked.
2. In the case the pulsator doesn’t
rotates either clockwise or
counterclockwise from the beginning
of wash cycle:
Possible Cause How to repair & settle
Turn the power off
Unusual operation. and on again then that
symptom disappears.
Explain “Don’t run wash
only continuously”.
Defect of
controller or poor
contact of
connectors of
motor leads.
Change the controller if
there are no contact
defects in the leads of
the motor.
1) Check resistance of the wash
motor if there is no motor-working
sound.
Resistance
is normal.
2) Check belt tension & whether the
clutch rotates normally if there is
motor-working sound.
V-belt is loose.
Loose the belt.
Clutch locked.
Defect of the
clutch.
Change the clutch if the
clutch pulley is locked
when making it rotated
clockwise and
counterclockwise by
hand.
Loose the belt.
Adjust belt tension or
change the belt if it is
impossible to adjust.
The plusator
locked.
Remove cause
locking the pulsator
Defect of the
clutch.
Change the clutch.
3. The pulsator doesn’t rotate at both
directions.
1) Check whether motor rotates at
both directions if there is motorworking sound when it’s
energized.
Motor rotates
at both
directions.
Defect of the
Motor doesn’t
rotates at both capacitor.(check
directions.
the capacitor’s
capacitance)
2) Check resistance of the motor if
there is no motor-working sound.
Adjust belt tension by
changing motor fixing
location and change the
belt if it is impossible to
adjust belt tension.
Change the motor if the
motor is locked when
having its shaft rotated
by hand.
Defect of the
motor.
Change the capacitor if
there is no contact defect
in capacitor’s lead
∞Ω
Motor coil is open.
Change the motor.
Normal
resistance.
Contact defect of
the leads.
Remove the causes.
44
6) Pulsator doesn’t rotate normally.
Where, what & how to check?
Result of Check
Possible Cause How to repair & settle
4. Pulsator weakly rotates.
1) Check voltage at the power outlet
where the washer is plugged into.
Less than 85%
Lower voltage.
of rating.
2) Check capacitance of the
capacitor.
Indicating
needle rises and
immediately
indicates ∞.
Capacitor is
normal.
The needle is
stopped after it
is raised.
Lack of
capacitance of the
capacitor.
Change the capacitor.
The needle
doesn’t move.
Capacitor is fully
discharged.
Change the capacitor.
Explain the causes and a
transfomer should be
used if necessary.
7) Water does not drain.
Where, what & how to check?
Result of Check
Possible Cause How to repair & settle
Drain Pump
Drain pump is
blocked by foreign
objects.
Disassemble the drain
pump cap and remove
the foreign objects in the
pump casing.
It’s coil is open.
Change the drain pump.
Defect in
connection part.
Repair defected
connection.
Defect of the
controller.
Change the controller.
Kinked.
Defect of
installation.
Reinstall so that it should
not be kinked.
2. Check whether the internal drain
rubber asm is bent.(For Non-pump
model)
Bent.
Defect of the drain Change the drain rubber
asm.
rubber asm.
3. Check whether the end of the drain
hose submerged into water or
higher than required.
(For non-pump model)
Submerged or
higher than
required.
1. Check whether there is drain pump
working sound.
There is pump
working sound.
2. Check resistance between terminals ∞ Ω
if there is no working sound of the
drain pump.
3. Check connection parts of the leads Defect in
connection part.
if there is no working sound and its
resistance is normal.
Connection part
has no defects.
Drain Hose
1. Check whether the drain hose is put
in a narrow space and kinked.
45
Defect of
installation.
Re-install so that it can’t
be submerged or not
higher than required.
7) Water does not drain.
Where, what & how to check?
4. Check whether the drain hose is
blocked by foreign objects. It may
happen in case of the hose is a little
kinked.
Result of Check
Blocked.
Possible Cause How to repair & settle
Blocked hose.
Remove the objects and
reinstall so that it can’t
be kinked.
PV Case
(for Non-Pump Model only)
1. Check whether the PV asm is
blocked by foreign objects.
Separate the drain motor
from the PV link,
disassemble PV cover
and then remove the
foreign objects within
PV case.
Blocked.
Check the washer works
normally after repair
and reassembling them.
(PV link & drain motor
lever should be
assembled accuratel.)
Drain Motor
(For Non-Pump Model only)
1. Check resistance of the drain
motor if it can not pull the PV link.
∞Ω
Drain motor coil is
open.
Resistance is
normal.
Contact defect in
connection parts
or defect of the
controller.
46
Change the drain motor
→Check the washer
works normally after
reassembling.
(PV link & drain motor
lever should be
assembled accurately.)
Change the controller if
there is no defects in the
connection parts.
8) Water drains though it is not the time of drain.
Where, what & how to check?
Result of Check
Possible Cause How to repair & settle
Drain Motor
(for Non-Pump Model only)
1. Check whether the drain motor is
normally returned after turning
power off.
(It is considered normal if the lever
of the drain motor is fully pulled out
by the PV spring)
Blocked.
Defect of the drain
motor.
Change the drain motor.
PV Case
1. If water drains though the drain
motor is normally returned, check
whether PV asm is blocked by
foreign objects or the bellows in
the PV asm is deformed.
Remove the objects in
the PV asm.
Blocked.
Bellows
deformed.
Defect of PV
Bellows.
Change the PV bellows.
(The bellows may swell
up if it contact petroleum
or petrochemical
substance because it is
made of rubber)
Defect of the
controller(Triac
defect)
Change the controller.
Controller
1. Check whether the drain motor or Works.
the drain pump works immediately
after power is turned on.
9) Drain error happens while water drains normally.
Where, what & how to check?
Ball Pressure Sensor
(Pressure Switch)
1. Check generation frequency of the
Ball Pressure Sensor
(Pressure Switch) without water.
Result of Check
Possible Cause How to repair & settle
Defect of the
Ball Pressure
Sensor(Pressure
Switch).
Less than
26.3 kHz
26.3~27.1 kHz
47
Defect of the
controller.
Change the Ball
Pressure Sensor
(Pressure Swtich)
Change the controller.
10) Spin extraction is not proceeded.
Where, what & how to check?
Result of Check
Possible Cause How to repair & settle
Motor
1. In the case that the wash motor does not
spin during spin extraction;
There is motor
working sound.
Defect of the
capacitor or
Mechanically
locked.
① Check frequency of the
Ball Pressure Sensor (Pressure
Switch), under no load, or
Less than
26.3kHz
Defect of the
Ball Pressure
Sensor (Pressure
Switch).
② Check contact defect of the safety
switch, defect of connection parts
and whether the lid is open if door
error is displayed.
The lid is open
Mistake in use.
1) Check there is motor working
sound,or
2) If there is no motor-working
sound;
③ Is placed the magnetic in Lid-B.
④ Check resistance of the motor.
Defect of
connection part.
The lid is open.
Explain “The lid is close
during operation”
Reconnect the conncetors.
Mistake in use.
Defect of magnetic in
LID-B
Contact defect of
the Ball Pressure
Sensor(Safety
Switch)
∞Ω
Change the capacitor
after checking defect of
capacitor.
check whether the
washing clutch or the
washing tub is blocked
if the motor rotates after
removing the V-belt.
Check whether the
motor is locked if the
motor does not rotates
even though the V-belt
being removed.
Change the Ball Pressure
Sensor(Pressure Switch).
Explain“The lid is close
during operation”
Change the Lid-B
Change the Ball Pressure
Sensor(Safety Switch).
Coil is open.
Change the motor.
Coil is open.
Defect of
connection part or
defect of the
controller.
Change the drain motor.
Assembling defect
of the drain motor or
the clutch
Reassemble the drain
motor or the clutch to
keep the clearance.
Defect of the clutch.
Change the clutch.
Drain Motor/Clutch
1. In the case the motor rotates but the
inner tub does not rotates;
1) Check resistance of the drain
motor if the drain motor doesn’t
work,or
2) Check gap between the PV link
and the brake lever if the inner
tub does not rotates while the
drain motor works.
∞Ω
Resistance is
normal
The clearance is
less than 2.0mmor
more then 3.5mm
The gap is normal
(2.0~3.5mm)
48
Change the controller after
checking connection parts.
11) Spining is going on even though the lid is open.
Where, what & how to check?
Safety Switch
1. Check resistance between both
terminals of the safety switch with
the lid open.
Result of Check
0~9Ω
Contact points of
the safety switch
are welded.
Change
Switch
∞Ω
Defect of the
controller.
Change the controller
Yes
Reed S/W is short
by magnetic on
the washer.
Keep magnet away from
the washer.
No
Reed Switch.
Change the controller.
Ball Pressure Sensor
1. Is placed the magnetic on the wash?
Possible Cause How to repair & settle
the
Safety
12) Spin basket doesn’t reach to full speed(normal rpm)
Where, what & how to check?
Result of Check
Possible Cause How to repair & settle
Main voltage
1. Check voltage at the power outlet
where the washer is plugged into.
Less than
85% of rating
Tool low voltage
Starting Capacitor
Lack of
capacitance
Defect of
capacitor
1. Check the capacitance of the
starting capacitor.
Clutch Assembling
1. Check the clearance between the
PV link and the brake lever and
clearance between the clutch lever
and the adjustment bolt.
Blocked by foreign objects
Change the capacitor
Adjust PV lever bolt and
paint it red.
Reassemble the drain
motor or the clutch.
The clearance is
less than 2.0mm
or more than 3.5mm
Bolt clearance is
out of range
1.9±0.1mm
Explain the cause and
recommend using a
transfomerformer if
necessary.
Defect of the
clutch
Adjust the bolt
clearance.
Remove the foreign
objects.
1. Check whether the PV asm, the
drain pump & the drain hose are
blocked by foreign objects so that it
makes water-splashing noise in the
tub.
49
13) Vibration, Noise or Unbalance Error happens during spin.
Where, what & how to check?
Result of Check
Possible Cause How to repair & settle
Using conditions such as
installation etc.
Not leveled.
1. Check whether the washer is
leveled. (Check clearance with out
tub and out case the left gap is the
same as the right and the rear gap is
1.5~2 time bigger than the front gap,
between the cabinet and the wash
bowl, when it is leveled.)
Defect of
installation
Level the washer.
2. Check whether laundry in the wash
bowl is out of balance that can
cause severe vibration & noise.
Laundry is
unbalanced.
3. Check whether the pulsator doesn’t
rotate during spin.(To check that,
remove the front lid and than run the
spin only cycle.)
The pulsator
rotates initially
then the inner tub
rotates.
Defect of the
clutch
Change the clutch
spring-B or the clutch
asm.
The lever is
bented
Defect of the
safety switch
Change the safety
switch.
Don’t repair and reuse it
because it creates
another problem if it is
wrongly repaired.
Hit
Defect of the
damper
Change four dampers
simultaneously.
(In assembling, check
the position to damper
asm)
Explain that it is not out
of order and it may
happen when big & long
laundry is washed.
Safety Switch
1. Check whether the lever of the
safety switch touchs the outer tub if
touching noise happens.
Damper
1. Check whether the outer tub cover
hit the top cover without load
during spin.
※ It is very important to find out what kinds of noise & where comes from to settle
noise during spin and accumulately service experiance.
50
14) Power is automatically turned off during operation or immediately
turning on the power switch.
Where, what & how to check?
Result of Check
Possible Cause How to repair & settle
Main voltage
1. It is mostly caused by noise from
mains or transfomerient power cut.
Defect in main.
Explain the cause.
(It happens specially
when a high frequency
equipment is a used
around the washer or in
the case voltage
fluctuation is big)
Mechanical defect
of the auto off
switch.
Change the auto off
switch.
Auto Off switch or
Controller
1.Check whether power is
automatically turned off when
turning on the auto off switch after
unplugging the power cord from the
outlet
Automatically
turned off
2. It would be defect of the controller if
power is automatically turned off
immediately when turning on the
power switch even though there is
no defects in the auto off switch.
Change the controller.
51
5. EXPLODED VIEW
TOP COVER
ASSEMBLY
TUB
ASSEMBLY
OUT CASE
ASSEMBLY
52
5-1. THE EXPLODED VIEW OF TOP COVER ASSEMBLY
A210
A330
A020
A024
A053
A011
A030
A040
A160
A220
A026
A050
A180
A060
A202
A200
A201
A191
A152
A170
A190
A151
A110
A192
A100
A 120
A230
A277
HOT(ORANGE)
A273
COLD(BLUE)
A274
A271
A272
HOT(ORANGE)
COLD(BLUE)
HOT(ORANGE)
COLD(BLUE)
A240
A275
A276
A270
53
5-2. THE EXPLODED VIEW OF OUT CASE ASSEMBLY
: Non-Service Part
F070
F010
F001
F000
F080
F082
F084
F081
F020
F090
F021
For Pump
F027
F100
F050
For Non-Pump
54
5-3. THE EXPLODED VIEW OF TUB ASSEMBLY
: Non-service part
K000
K090
K012
K010
K011
K022
K021
K024
K025
K023
K027
K020
K028
K060
K030
K062
K063
K040
K050
K160
K201
K061
K200
K111
K101
NATURAL
K210
K110
K102
BLUE
K220
K064
K250
K230
For Pump
For Non-Pump
K140
K130
or
K271
K272
For Non-Pump
K150
K276
K273
K274
K277
K278
K275
K170
K263
K120
K180
K270
K280
K190
For Non-Pump
55
K262
or
For Pump
K261
K260
Download PDF

advertising