Beyonwiz DP-S1 Stereo Receiver User Manual

Welcome Message
Welcome Message
Thank you for choosing a DP-S1, the epicenter of your home network.
The DP-S1 supports not only the features of the conventional digital broadcasting receiver (STB, Set-top Box) and PVR (Personal Video Recorder),
but also all the ways of watching the multimedia content with your PC and Internet; the USB (Universal Serial Bus) ports and the networking
feature combining with DivX playback, you can play any multimedia content in any storage device with no external device. With a DP-S1, you
don’t have to bring your PC to your living room any more and you will share valuable time and experience with your family.
To enjoy all the new features of the DP-S1, please make sure that the latest firmware is installed on
your system. In the new firmware, new features which are not described in this manual can be added
and some features described in this manual can be altered or removed for the best performance and
users’ experiences.
Please visit our website, www.beyonwiz.com.au, to get new information of the firmware and features.
i
Precaution
Precaution
Read this manual carefully before using this product. The cautions
z
Do not repair, disassemble or modify this apparatus yourself. It can
described below contain important information about safety, and are
cause fire or electric shock. If internal checking or maintenance is
categorized into: Danger, Warning and Notice. The company will not be
needed, please contact your service center or agency.
responsible for accidents or damage resulting from careless handling by
z
Do not block or cover any ventilation opening. A fire can result from
overheating.
the user.
z
Turn off and unplug the power as quickly as possible during electric
storms. Failure to do so can result in fire or electric shock.
DANGER
z
possible during electric storms. Failure to do so can result in fire or
If the user mishandles the product, there is loss of life risk or
electric shock.
critical injury.
z
z
it is damaged, please turn off the power and remove the plug from
the power outlet, fire or electric shock may occur.
non-specified A/C outlet, it can result in fire or electric shock.
The product must not be exposed to water or liquid of any kind, or be
exposed to drips or splashes. It can result in fire or electric shock.
z
Do not place heavy objects, including the product itself, on top of the
power cord. If it is damaged, it can result in fire or electric shock.
z
Do not place metal objects on top of the apparatus. If metal objects
fall onto the apparatus, it could result in fire or electric shock.
ii
Do not drop the apparatus (for example by putting it in a place where
it may fall) or subject it to impact. The product might be damaged. If
Connect the power cord only to A/C outlets as specified by the user
manual or product specification. If the power code is connected to a
z
Remove the antenna’s power plug from the outlet as quickly as
z
Never touch the power cord with wet hands. It can result in an
electric shock.
Precaution
NOTICE
WARNING
If the product is mishandled, the user might receiver a serious
If the product is mishandled, it might cause minor damage.
or minor injury. Damage or loss to the user’s property may also
occur.
z
If the apparatus becomes marked, clean it gently with a soft cloth or
towel. Never use chemical solvents such as benzene, thinner, acetone
z
The product must not be exposed to water or liquid. If the apparatus
or other solvents. The surface of the apparatus might become
is exposed to drips or splashes, it might cause a problem that may
discolored and the paint might peel.
not be repairable.
z
z
z
z
z
Do not place or keep the apparatus in the following situations. Doing
so might cause problems.
Do not repair, disassemble or modify this apparatus yourself. It can
be seriously damaged, possibly beyond repair.
- Where it is too hot or cold.
Turn off the power and unplug the power cord as quickly as possible
- Where there is high humidity.
during electric storms. The apparatus may be damaged.
- Where there are excessive temperatures, for example in front of
air-conditioners or heating vents.
Remove the antenna’s power plug from the outlet as quickly as
possible during electric storms; otherwise the apparatus might be
- Where there is dust or soot.
damaged.
- In confined areas where the heat cannot be released.
Data recorded in the HDD may be lost due to a shock, lightening or
- Where it is exposed to direct sunlight.
electricity failure. The user must back up his or her own data, and the
z
Turn the apparatus off and unplug the power cord if the unit is to be
unused for a long period of time.
company does not take any responsibility for failure to do so.
z
Do not place heavy objects on top of this apparatus. It might cause
malfunction or damage.
z
If the apparatus is so seriously damaged that it cannot be repaired,
or has stopped working altogether, dispose of it properly in
accordance with the local laws or regulations in your area.
iii
Precaution
About the internal hard disk drive
The internal hard disk drive (HDD) is a fragile piece of equipment.
Please use the apparatus within the guidelines below to protect against
possible HDD failure or to protect against accidental loss.
This symbol is intended to alert the user to the presence of
z
Do not move the apparatus while it is on.
uninsulated “dangerous voltage” within the product’s enclosure
z
Install and use the apparatus on a stable, level surface.
that may be of sufficient magnitude to constitute a risk of
z
Do not block the top ventilation holes.
electric shock to persons.
z
Do not use the apparatus in excessively hot or humid places, or in
places that may be subject to sudden changes in temperature.
This symbol is intended to alert the user to the presence of
Sudden changes in temperature can cause condensation to from
important operating and maintenance (servicing) instructions
inside the apparatus. This can be a cause of HDD failure.
in the literature accompanying the appliance.
z
While the apparatus is switched on, do not unplug it from the wall
socket or switch the electricity off from the circuit breaker.
z
Do not move the apparatus immediately after switching it off.
z
If there is a power failure while the apparatus is on, some data on the
HDD might be lost.
z
The HDD is very delicate. If used improperly or in an unsuitable
environment, the HDD may fail after a few years of use. Signs of
problems include playback unexpectedly freezing and noticeable block
noise (mosaic) in the picture. Sometimes there will be no warning
signs of HDD failure. If the HDD fails, no playback of recorded
material will be possible. In this case the HDD needs to be replaced
by a qualified technician.
iv
Precaution
Copyright
This manual is protected by copyright laws.
Copy, use, reproduction of this manual in part or whole without beyonwiz's
prior written permission is prohibited.
Disclaimer
The manufacturers, distributors and agents are not liable to any kind of
damage caused by the use of the information contained in this manual.
The instruction and descriptions which this manual contains are based on
the time of this manual's production.
The manufacturer constantly updates it with new functions and technology.
All the specifications are subject to change without prior notice.
Trademarks
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Manufactured under the license from Dolby Laboratories. "Dolby" and the
"double-D" symbol are trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Surround" are registered trademarks of DTS, Inc.
DVD Logo is a trademark of DVD Format/Logo Licensing Corp., registered in
the U.S., Japan and other countries.
The USB-IF Logos are trademarks of Universal Serial Bus Implementers
Forum, Inc.
v
Contents
Contents
Welcome Message
Precaution
1. Package Contents
2. Introduction
ii
1
2
1. DP-S1 Highlights and Features
2
2. Front Panel
2
3. Rear Panel
2
4. Remote Control
3
5. Front Display
4
3. How to Connect
5
1. A/V Connection
5
2. Antenna Connection
6
3. LAN and W-LAN Connection
7
4. Quick Setup
1. Start Quick Setup
vi
i
11
5. STB & PVR Function
27
1. Basic STB Function
27
2. Service Edit
33
3. PVR Function
36
4. EPG
48
6. File Playback Function
51
1. Exploring Contents and Playback
51
2. Contents Playback
54
7. Internet Service
61
8. Advanced Setup
62
1. Miscellaneous
62
2. Management
68
9. Set Remote Control
72
1. Automatic Code Search
72
2. Manual Set
72
11
2. Configuration
15
3. Network
22
Warranty Conditions
a
Contact Information
b
Package Contents
1. Package Contents
The following elements are included in the gift box.
Please check all package contents before using your product.
z
DP-S1
z
Remote Control
Batteries of
z
the Remote Control
(AAA size x2)
NOTICE: Two side panels are packaged separately.
Please assemble the panels as illustrated on the carton box.
z
User Manual
z
RCA Audio/Video Cable
z
Component (Y/Pb/Pr) Video Cable
z
Ethernet Cable
z
W-LAN Antenna (x2)
1
Introduction
2. Introduction
1. DP-S1 Highlights and Features
2. Front Panel
Touch Buttons (x8)
As a HD (High Definition) multimedia epicenter, the DP-S1 supports
(Menu, Ch -, Ch +, Vol -, Vol +, OK, Stop/Eject, Standby)
various ways of connecting to HD TVs and audio systems; HDMI port
combining with HD video decoders, which support MPEG-2, MPEG-4,
H.264 and WMV9, give you the true HD digital A/V environment.
Moreover, by supporting USB host ports and networking, the most
frequently used ways of sharing contents, the DP-S1 gives unlimited
DVD Loader
flexibility to access and play multimedia content.
Slot Door
(SD/MMC/Memory Stick, CF Card, USB)
Side Panel (2EA)
Dual Tuner
DVB-T Compliant with Internal Loop through
Video Output
Composite, S-Video, Component (Y, Pb, Pr), HDMI
Audio Output
5.1ch RCA with Dolby Digital and DTS decoding
3. Rear Panel
Coaxial and Optical S/PDIF Output, HDMI
Interface
DVD Loader
10/100 Ethernet Port, 802.11g W-LAN
2 USB Host Ports (USB 2.0 Compliant)
Memory Card Slots: SD, CF, MMC and Memory Stick
2
1. ANT IN
5. OPTICAL AUDIO
9. COMPONENT (Y/Pb/Pr)
Multimedia
Movie: wmv, avi, mpg, vob, mp4, asf, tp, trp
2. RF LOOP OUT
6. W-LAN ANT
10. 5.1 CH AUDIO
Playback
Music: mp3, wma, aac, ac3
3. HDMI
7. COMPOSITE
11. ETHERNET
Photo: bmp, jpeg, png
4. COXIAL AUDIO
8. S-VIDEO
12. USB
Introduction
4. Remote Control
The enclosed remote control can also be used to control a TV set
provided by major TV manufacturers. The STB and TV buttons set the
remote control to control the DP-S1 and TV set respectively. You can
check the operating mode of remote control from the red backlight of
the STB and TV buttons.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
STANDBY
EJECT
STB
TV/RADIO
TV-OUT
TV
SETUP
WizTV
LIVE
FILE PLAY
VOL +/CH +/MUTE
INFO
FAV
GUIDE
POP-UP
LIST
EXIT
UP/DOWN/LEFT/
RIGHT
OK
RECALL
RED
GREEN
YELLOW
BLUE
0~9
SLEEP
ZOOM
PLAY
STOP
PAUSE
SLOW FWD
REW
FF
PREV
NEXT
REC
SUBTITLE
TELETEXT
SOUNDTRACK
Switch the DP-S1 between Operation and Standby mode.
Open/Close of DVD Tray.
Set Remote Control to Work for the DP-S1.
Change to TV mode or Radio mode.
Change Video Output. (Refer to page 17. for more information)
Control standard TVs with remote control.
Go to SETUP Menu.
Go to Internet Service. (for future use)
Go to Live TV.
Go to File Play.
Adjust the volume. (Increase/Decrease)
Change TV or Radio Service.
Enable or disable the Audio output.
Show service information.
Show Favorite Service List.
Show EPG (Electronic Program Guide).
Show advanced menus of the current mode.
Show Service List.
Return to the previous menu or Cancel.
Move the indicator on the menu mode.
Select an item on the menu or Confirm.
Recall the previously viewed (or listened) service.
Optional key for Teletext service
Optional key for Teletext service
Optional key for Teletext service
Check an item while selecting another on the same step.
Numeric buttons.
Set sleep time of the DP-S1.
Zoom on DVD Play mode.
Play Content.
Stop playback.
Pause playback.
Slow Forward.
Rewind.
Fast Forward.
Go to the previous track or file, and continue playing.
Go to the next track or file, and continue playing.
Start recording.
Change Subtitle language.
Show Teletext.
Change Soundtrack language.
3
Introduction
5. Front Display
The front display window gives you easy way to check the status of the
DP-S1.
1
2
Indicates hard disk space used.
Lights when there is no space left on the HDD.
Lights when there is no time information.
3
Lights when a timer recording is programmed in standby mode.
4
Lights when the signal comes out via HDMI.
5
Lights when the signal is HD (High Definition).
6
Indicates the resolution of video output.
7
Lights when the video output is in Progressive Scan mode.
8
Lights when Ethernet connection is set up and enabled.
9
Lights when Wireless LAN connection is set up and enabled.
10
Lights when USB devices or memory cards is connected.
11
Indicates operation mode (TV or Radio).
12
Indicates the current recording status.
13
Lights when Time Shift is enabled.
14
Indicates playback of content with light on the outer circle and
revolving on the inner circle.
15
Indicates the audio format of content.
Lights on FR and FL when the audio output is set to stereo.
16
Lights on all indicators when the audio output is 5.1CH.
No light when the audio output is Pass-through.
4
How to Connect
3. How to Connect
1. A/V Connection
1-1. Video Connection
Depending on your A/V equipment including TV which you would like to
To connect your DP-S1 to your TV or display, you have the following
connect to, there are various ways you can connect the DP-S1 and A/V
options;
equipment. To make the best connections, please refer to the manual of
Only one connection can be done at a time.
your TV, stereo system or other equipment which you would like to
The following order of video connection is based on the quality.
connect to.
To get High Definition playback of High Definition content, we
z
HDMI (the cable can be purchased separately)
recommend you to connect your High Definition display with a HDMI
z
Component (Y/Pb/Pr)
cable. HDMI supports Standard, Enhanced or High-Definition Video and
z
S-VIDEO (the cable can be purchased separately)
Multi-Channel Audio in a single cable. (HDMI cable can be purchased
z
Composite (VIDEO)
separately)
If your TV does not support HDMI but has a DVI input, a HDMI to DVI
converter can be purchased separately. (In this case, Audio signal
output is disabled)
If you do not have a High Definition display, you can connect the DP-S1
and A/V equipment via other connection options.
5
How to Connect
1-2. Audio Connection
2. Antenna Connection
To connect your DP-S1 to your TV or audio system, you have the
Please connect your TV Antenna to the DP-S1.
following options;
Only one connection can be done at a time.
z
S/PDIF Digital Audio output (COAXIAL, OPTICAL)
z
5.1 CH Analog Audio output
6
z
Antenna In (connecting to the roof Antenna)
z
RF LOOP OUT (only for bypassing the signal to another device)
How to Connect
3. LAN and W-LAN Connection
3-1. Connection Using a Network Router
In order to utilize the DP-S1 fully, it is strongly recommended to
As shown in the picture, you have to connect the DP-S1 to the router
connect the DP-S1 to the home network with a network router.
with an Ethernet cable included in the box. If you purchase a router
For this connection, the following equipments are required;
with a DP-S1 and have no experience of connecting a router with a PC,
please refer to user’s manual of the router and connect the DP-S1 to
z
A router with a built-in network switch.
the router as an additional PC. If the router has the DHCP (Dynamic
z
An Ethernet cable.
Host Configuration Protocol) server feature and it is enabled, all the
z
A PC with Windows XP operating system.
configurations for networking will be set automatically and the DP-S1 is
ready to use. For more information of configuring LAN, please refer to
Chapter 4. Quick Setup, which illustrates how to configure the LAN port.
7
How to Connect
3-2. Connection Using a Wireless Router
The DP-S1 supports 802.11g wireless LAN protocol, thus it is strongly
As shown in the picture, you have to connect the DP-S1 to the router
recommended to connect the DP-S1 to a wireless router compatible
through wireless network. If you purchase a wireless router with a DP-
with 802.11g protocol. For this connection, the following equipments
S1 and have no experience of connecting a wireless router with a PC,
are required;
please refer the user’s manual of the router and connect the DP-S1 to
the router as an additional PC. You can configure the wireless LAN of
z
A wireless router with a built-in network switch.
the DP-S1 step-by-step. Please refer to Chapter 4. Quick Setup,
z
A PC with Windows XP operating system.
illustrates how to configure the DP-S1.
8
How to Connect
3-3. Direct Connection to the PC
With this configuration, you can share contents with a PC through home
If your PC has the DHCP server feature and it is enabled, all the
network but the DP-S1 can not access to Internet. For this connection,
configurations for networking will be set automatically and the DP-S1 is
the following equipments are required;
ready to communicate with your PC. If you want to get more
information to configure your PC as a DHCP server, please contact
z
A PC with Windows XP operating system.
Microsoft Corp. If your PC does not have the DHCP server feature, you
z
A crossed Ethernet cable.
have to disable the DHCP feature and set IP (Internet Protocol)
information manually for the DP-S1 and PC. Chapter 4. Quick Setup,
illustrates how to configure the LAN of the DP-S1 manually.
9
How to Connect
3-4. Direct Connection to Internet
With this configuration, you can not share contents with a PC through
NOTE
home network. For this connection, a crossed Ethernet cable (not
z
The wireless LAN function of the DP-S1 requires more hardware
included in the box) is required. The most ISP (Internet Service
resources of the DP-S1. Therefore, the functionality can be limited if
Provider) services DHCP feature. Therefore, you can connect your DP-
you are using the wireless LAN.
S1 to Internet with a crossed cable and enjoy it. If you have to
configure your DP-S1 manually, please contact your ISP for more
information.
10
Quick Setup
4. Quick Setup
1-1. Quick Setup of Video Output Format
This chapter guides you to set up the DP-S1 quickly so that you can
If the front display window indicates that the DP-S1 is ready to use but
experience it’s basic features. In order to enjoy the DP-S1 fully, please
nothing displays on the TV screen, you have to adjust the format and
refer to Chapter 8. Advanced Setup.
resolution of the video output by pressing the TV-OUT button. The
default video output is in a SD PAL (576i) format. You can switch the
video output to a SD NTSC (480i), HD PAL (720p), HD NTSC (720p),
1. Start Quick Setup
HDMI Auto, HDMI PAL and HDMI NTSC format successfully with the TVOUT button. Please refer to the following information to adjust the
If A/V and antenna connection is complete, press the STANDBY button
to start. The front display window will show “Welcome”, “Loading”, and
“Live” successively. If you turn on the DP-S1 for the first time after
purchasing, there will be no digital broadcasting services stored in the
video output to each of the video connection types.
z
Composite/S-VHS: SD PAL or SD NTSC
z
Component: HD PAL or HD NTSC
z
HDMI: HDMI Auto, HDMI PAL or HDMI NTSC
DP-S1, it will switch to SETUP MENU automatically. Otherwise, you can
enter SETUP MENU by pressing the SETUP button.
NOTE
z
output of the DP-S1 when you can not see anything on the TV screen
NOTE
z
because the video formats do not match each other.
If the front display shows “Setup” instead of “Live”, this means that
you have to scan the broadcasting services first. Please refer to the
The TV-OUT button is developed so that you can configure the video
z
The front display window indicates the current video format as you
press the TV-OUT button.
next section of scanning services.
z
To make your configuration effective, please wait at lease 3 seconds
before pressing the TV-OUT button.
z
It is strongly recommended that you again configure the video format
more precisely in the Setup menu.
11
Quick Setup
1-2. Basic Operation
1) Enter and Exit Setup Menu
You can enter the SET-UP MENU with the SET-UP button on the remote
control and exit to the previous operation mode such as LIVE or FILE
PLAY with the EXIT button.
2) Setup Menu Structure
The SET-UP menu is grouped in four parts: CONFIGURATION, NETWORK,
MISCELLANEOUS and MANAGEMENT. Firstly, you have to choose one of
these categories (main category) which are placed on the top menu (a
horizontal bar) as graphical icons. As you select it with the LEFT/
RIGHT buttons, the left menu (a vertical bar) displays different subcategories according to your selection on the top menu. If you choose
z
LEFT/RIGHT buttons: Select an item on the top menu. (Horizontal)
one category on the left menu with the UP/DOWN buttons, the items
z
UP/DOWN buttons: Select an item on the left menu. (Vertical)
belong to the sub-category will be listed on the item list. You can enter
z
OK button: Enter the item list.
the item list with the OK button to adjust the configuration. In the item
z
EXIT button: Exit from the item list.
list, the LEFT/RIGHT/ UP/DOWN buttons will not work for changing
your selection on the top or left menus: these buttons are used to
choose an item on the item list to change its configuration. You can exit
from the item list with the EXIT button.
12
Quick Setup
3) How to Change Configuration
In the setup menu, there are several ways to change the configuration.
z
Setup using the NUMERIC buttons: The NUMERIC buttons are used
This manual explains how to change the configuration, here are three
to set a configuration with numbers such as time information. You can
cases which are used frequently.
also move the cursor to left or right with the LEFT of RIGHT buttons
while you are editing the configuration. You can set the change with
z
Selection on a pop-up menu: You can choose an option on the pop-up
the OK button or cancel it with the EXIT button.
menu. If you press the OK button, the pop-up menu will be displayed.
Select one option with the UP/DOWN buttons and press the OK
button. If you do not want to change settings, press the EXIT button.
The pop-up menu will disappear.
13
Quick Setup
z
On-screen keyboard: If you need to input alphabetic characters, an
If you need to input numbers or special characters, please press the
on-screen keyboard will be displayed. You can move the cursor with
GREEN button. The screen keyboard turns to numbers and special
the UP/DOWN/LEFT/RIGHT buttons and select the letters with the
characters. You can also exit and return to small characters with the
OK button. The YELLOW and BLUE buttons work as a space and
GREEN button.
backspace keys respectively. You can also clear your inputs by
selecting “Clear All” with the OK button on the screen.
After the input, you can save it by selecting “Save & Exit” with the
OK button. If you do not want to save, please press the EXIT button.
If you need to input upper case characters, please press the RED
button. The screen keyboard will changed to upper case characters
and you can input the same way. You can return to lower case
characters with the RED button.
14
Quick Setup
2. Configuration
2-1. Time Setting
Please set the current date and time. The date and time information will
be the reference for the timer recording. Therefore, you have to
z
Mode: You can select how to set the date and time. Please press the
OK button then you get a pop-up menu. You can choose one with the
configure the time and date information precisely. You can also select
UP/DOWN buttons and select it with the OK button. Under the
preferred date and time formats. The following picture illustrates the
“AUTO” mode, the date and time will be set automatically according
items which you configure to set the time and date.
to the GMT information and the time-offset you configured. To obtain
correct time under “auto” mode you must enter the correct time
offset from GMT according to what state you are in. Under the
“MANUAL” mode, you have to set the date and time manually using
the numeric keys.
15
Quick Setup
z
z
Date Format: Please select a display format for the date either
NOTE
“DD/MM/YYYY”, “MM/DD/YYYY” or “YYYY/MM/DD” on a pop-up menu.
z
(DD-day, MM-month, YYYY-year)
automatically from DTV station when you turn on the DP-S1 and
Time Format: Please select how to display the time: either a 12-hour
watch a program. But some DTV station doesn’t send the GMT
format or a 24-hour format. You will get a pop-up menu if you press
information or sends wrong information.
the OK button.
z
z
Time Offset: Time offset means the difference between GMT and your
local time zone. For example, the time zone of Sydney, Australia is
GMT + 10:00 and +10:00 is the time offset of Sydney. Please press
OK button to change the time offset. You will get a list of areas as a
pop-up menu. You can select an area where you live to set the timeoffset. Please add +1:00 for daylight saving time if used in your
region.
z
Under the “AUTO” mode, the GMT information can be received
Current Time: Under the “AUTO” mode, current date and time will be
displayed and you can not change it. Under the “MANUAL” mode, you
have to set the date and time information manually. To change the
date and time, please press the OK button and set with the
NUMERIC buttons. You can save it with the OK button. If you want
to
modify
before
you
save
it,
please
use
the UP/DOWN/
LEFT/RIGHT buttons to place the cursor on the digit you want to
change.
16
Your selected date and time format will be applied to all the date and
time displayed on the graphical menus.
z
Time offset is activated under the “AUTO” mode only.
Quick Setup
2-2. A/V Output Setting
You have to set the video and audio configuration according to your TV
1) Video Outputs
z
set. Please make sure the video and audio port of the DP-S1 is
connected to your TV set.
support the PAL format in Australia.
z
TV Aspect Ratio: Please select either 4:3 or 16:9 according to your TV
screen ratio.
The A/V Output menu consists of two parts; the video output and the
audio output. You can change the configuration of the video and audio
Video Type: You can select either PAL for NTSC format. Most TV sets
z
16:9 Display format: You have two options to display picture in 16:9
outputs with pop-up menu. Please press the OK button to get a pop-up
format on your 4:3 TV set: Letter Box or Pan&Scan.
menu for each item.
- LetterBox: You can see the full screen of 16:9, but the top and
bottom edges of your screen display black horizontal bars.
17
Quick Setup
- Pan&Scan: The picture is displayed in full on your 4:3 TV screen,
but left and right sides of the original picture cannot be displayed.
NOTE
z
The component video output supports SD (576i for PAL and 480i for
NTSC), 480p, 576p, 720p and 1080i.
z
If you set the video output resolution as HD (more than 576p), the
composite and S-Video outputs will be disabled automatically.
z
Please note that your TV set can not display anything if you set the
resolution of the video outputs higher than the maximum resolution
that your TV set can accept.
z
z
Component Video: It is recommended to set the resolution of
component video output to fit to your TV set for the best quality
display. Please check the manual of your TV set to get the maximum
resolution for the component video input.
z
HDMI Video: If you set the HDMI output as Auto, the DP-S1
configures the best format of HDMI suitable for your TV set
automatically.
But
some
TV
sets
do
not
support
the
auto-
configuration function. In this case, you have to set the resolution
manually: 480i, 480p, 576p, 720p or 1080i. Please check the manual
of your TV set to get the maximum resolution for the HDMI video
input.
18
The HDMI setting, outputs the audio in digital format as well.
Quick Setup
2) Audio Outputs
The DP-S1 supports 5.1ch audio in an analog format with the Dolby
NOTE
z
Digital and DTS decoders. It also supports digital outputs with optical
and coaxial ports.
If you set the audio format as 2ch, the DP-S1 mixes down 5.1ch
audio source to 2ch audio.
z
If the content of a channel broadcasted has 2ch audio source, the DPS1 can not expand the 2ch audio source to 5.1ch audio format.
z
Audio Format: If you only have a stereo speaker system, you have to
Therefore, you can only hear sound from the front speakers even
set the audio format as 2ch. If you connect a 5.1ch speaker system
though you have connected a 5.1ch speaker system and set the DP-
to the DP-S1, choose 5.1ch for the best performance. In order to
decode an audio source with an external audio decoder system, set
the audio format as pass-through. In this setting, the analog audio
S1 as 5.1ch audio.
z
Unless you set the audio format as 2ch when you connect stereo
speakers to DP-S1, you can not hear sound of 5.1ch source properly.
output will automatically be disabled.
z
S/PDIF Output: Enables the digital audio output through the coaxial
and optical ports.
19
Quick Setup
2-3. Service Scan
Before watching a broadcasted program, you need to scan all the
z
Antenna DC (+5V) Power: You can supply DC (+5V, max. 100mA)
services first. The scanned services will be stored in the non-volatilizing
power to the indoor antenna through the antenna cable. Please make
memory. Therefore you don’t have to scan the service again unless you
sure that your external antenna is an active type, which means that
delete all the information of the service stored in the memory. If there
the antenna requires external DC power to enhance the sensitivity,
are no services scanned previously, the service scan page will be
before you supply DC power to the antenna.
presented automatically.
z
Scanning Range: You can scan over all channels (VHF and UHF) by
selecting the “FULL” option. If you want to scan over specific
channel(s), please select the “PARTIAL” option. In this case, you have
to set the start and end channels manually.
z
Start Channel: This menu will be enabled when you choose the
“PARTIAL” option. Please press the OK button to select the start
channel.
z
End Channel: This menu will also be enabled when you choose the
“PARTIAL” option. The end channel must be greater than the start
channel.
DANGER
You can select the options for each item with a pop-up menu. Please
press the OK button to get a pop-up menu.
20
z
IF THE ANTENNA IS PASSIVE TYPE, THE DC POWER WILL DAMAGE
THE ANTENNA AND THE DP-S1 ITSELF.
Quick Setup
z
Start Scan: After selecting your scanning range, you can “start
NOTE
scanning”. Select Start Scanning and then press the OK button. On
z
You can not select an end channel smaller than the start channel.
the screen, the scanning window appears and displays the process.
z
If you scan over all the channels with the “FULL” option, the previous
service information including the service list information and your
favorite lists will be erased automatically.
z
If you scan over specific channel(s) with the “PARTIAL” option, you
can add the new service to your previous channel list.
Now, you are ready to watch live television by pressing the LIVE button.
21
Quick Setup
3. Network
3-1. Setting
The DP-S1 supports two networking interfaces: Ethernet and wireless
The first step is to select an interface and configure it. You can select
LAN. You can use one of these interfaces at a time. To use the wireless
this in the Network Device menu. You will get a pop-up menu by
LAN interface, you have to prepare a wireless router. This section will
pressing the OK button. If you want to use the Ethernet interface,
guide you how to configure the network interfaces.
please select the “LAN” option. You can set the wireless LAN interface
by setting the “Network Device” menu as “W-LAN”.
NOTE
z
The wireless LAN interface requires more hardware resources such as
processing power and memory capacity. Therefore, some features will
be limited if you use a wireless LAN interface.
z
The wireless LAN interface of the DP-S1 is compatible with IEEE
802.11g. Therefore it is strongly recommended to connect the DP-S1
with a wireless router compatible with IEEE 802.11g protocol for
maximum performance.
z
The wireless LAN interface requires additional configuration to set a
secure channel of communication. When using a wireless LAN
interface you at risk from unauthorized users getting into your
network or devices. This is at customers own risk.
NOTE
z
If you select “Disable” option, all network devices will be disabled
even though you configure them properly.
22
Quick Setup
1) LAN Setting
If you select the “LAN” option on the “Network Device” menu, all the
items to be configured for the Ethernet interface will be displayed.
z
DHCP: If you want to get the all the configuration from the router and
set automatically, please select the “Enable” option. In this case, the
rest of the items are disabled to select because you don’t have to
configure them manually. You can apply the change by pressing the
RED button. A pop-up window displays the effective configuration of
the Ethernet interface when you press the RED button.
You can also get the pop-up window and check the current effective
configuration of the Ethernet interface with the GREEN button.
23
Quick Setup
z
IP Address: If you select the “Disable” option in the “DHCP”, you have
z
to input the IP address manually. You can input the address with the
MAC Address: This will display the MAC address of the Ethernet
interface but you can not change it.
NUMERIC buttons and the LEFT/RIGHT buttons. You can move to
the next item of Subnet Mask with the DOWN button. You can
configure the following items in the same way; Subnet Mask, Gateway,
NOTE
Primary DNS Server IP and Secondary DNS Server IP.
z
You have to press the RED button to make your changes and
configurations for the network interface to take effect.
z
If you set the DHCP function to enable, the rest of the settings can
not be changed. However they still have the previous configuration to
help you set these easily set the DHCP function is enabled next time.
z
The effective configuration of the Ethernet is always displayed as a
pop-up window by pressing the GREEN button.
z
To use the DHCP function for the DP-S1, your router should support
the DHCP function. Please check the manual and the configuration of
your router.
You can apply the changes by pressing the RED button. A pop-up
window displays the effective configuration of the Ethernet interface
when you press the RED button.
24
Quick Setup
2) W-LAN Setting
The other interface available for networking is the wireless LAN. You can
z
Network Type: you have to specify the type of the device which the
set and use this interface by setting the “Network Device” menu as “W-
DP-S1 communicates with. If you connect your DP-S1 with a router,
LAN”.
please set the “Network Type” as “Infrastructure”. If you connect your
Because the wireless LAN communicates through a radio channel, you
DP-S1 with a PC, please set the “Network Type” as “Ad-hoc”.
have to configure additional feature. The followings will explain these
z
Authentication Type: This is a more secure and safer connection
features briefly. Please remember that the following features should be
between the DP-S1 and the router as they authenticate each other
the same as your router.
before communicating.
Make sure it’s set the same
as the
authentication type of the router.
z
Encryption Type: If this option is set, the DP-S1 will communicate
with your router by encrypting the data. So, you can get a secure
communication channel. Please set this the same as the encryption
type of your router.
z
Key: Some authentication and encryption types require a key. Please
set the key same as your router.
The DP-S1 supports all security features which are most commonly
supported in wireless routers to ensure the compatibility with wireless
routers. You can set this configuration on the setup menu. Before you
set this, be sure that you configure your wireless router.
z
Network Name (SSID): you have to specify which router or device
The user also set the IP information for the wireless LAN interface. As
should be connected to your DP-S1. You can input the SSID of your
can Ethernet device, you can select how you configure the IP
wireless router with the screen-keyboard.
information: automatic configuration from DHCP server or manual
configuration. Please refer to the previous part of setting LAN interface.
25
Quick Setup
3-2. Ice Guide
The DP-S1 supports iceTV service through the Internet. If you have an
z
iceTV account, please set your account to utilize the service on your DPS1.
Owner ID: if you press the OK button, on-screen keyboard will
displayed and you can enter your ID of iceTV account.
z
Password: if you press the OK button, the on-screen keyboard will
displayed and you can enter your password.
z
Check User Info: you can check if your account information is valid or
not.
NOTE
z
For more information about iceTV, please visit www.icetv.com.au, or
refer to Chapter 5. STB & PVR Function and find out how you can
utilize the 7-day EPG (Electronic Program Guide) using the iceTV
service.
z
Most broadcasters don’t provide a seven day guide. Therefore we
recommend you use IceTV guide if you wish to have a weekly guide.
z
Ice Guide: you can setup the way you get the EPG information; if you
select “Enable” for this option, the DP-S1 gets and updates EPG with
information from iceTV service. If you select “Disable” option, the DPS1 will update the EPG with the information from the broadcasting
station only.
26
STB & PVR Function
5. STB & PVR Function
The DP-S1 supports various ways of enjoying multimedia contents and
it groups its features in three parts; the first group is STB (Set-top Box)
and PVR (Personal Video Recorder) functions, the second group is file
playback functions including playback of recorded programs with PVR
2) Change Service with Service List
The service list contains all the broadcasting services you can receive.
You can get the service list as a pop-up menu by pressing the LIST
button and select a service with the UP/DOWN buttons.
function and DVD playback, and the last group is Internet services
which will be updated later.
This chapter describes the functions of STB and PVR. You can access
this operating with the LIVE button on the remote control in any
operating mode.
1. Basic STB Function
1-1. Service Change
1) Change between TV and Radio Services
Only the TV services will be listed under the TV service mode and only
You can watch TV services or listen to radio services with the DP-S1.
the radio services will be listed under the radio service mode. You can
The TV/RADIO button changes the operation mode. When you are
check the operating mode from the message placed on the top of the
listening to a radio service, the TV screen displays nothing but a still
service list: “TV service” or “Radio Service”. The LEFT and RIGHT
image.
buttons work as page-up and page-down respectively. If you want to
hide the service list menu, press the EXIT button.
27
STB & PVR Function
You can also edit the service list in the list view. This will be explained in
NOTE
the later section.
z
If you change a service continuously with the CH+ or CH- button,
only the information box will be changed according to your command:
You can watch the changed service 3 seconds after you press the last
NOTE
z
You can hide the help message and extend the service list with the
button.
z
RED button. If you want to display the help message, please press
To record two programs simultaneously, two tuners are allocated for
the recording. Therefore, you can only change to a limited number of
the RED button again.
services while the two programs are being recorded.
z
When selecting channels using the numeric buttons. Make sure you
know the channel number you wish to select as all channels fall on a
3) Other Ways to Change Service
different number in each state. Eg: channel 10 isn’t always on
As in conventional TV sets, you can change a service which you want to
number 10 in the digital network.
watch or listen to in the following ways;
z
Service Change with the CH+/CH- buttons: As you press the CH+ or
CH- button, the next or previous service will be selected.
z
Service Change with Numeric Buttons: You can change to a certain
service directly with numeric buttons. For example, if you press 1, 4,
and 6 buttons consecutively and then the OK button, service 146 will
be displayed on the screen.
z
Recall the Previously Viewed Service: the RECALL button returns to
the previously viewed service.
28
STB & PVR Function
1-2. Information Box
You can check the information of a service and the program using three
information boxes; the information box contains specific information of
a current service and program. The extended information box contains
more details about the current program. And the recording information
box shows the recording status. You can check these by pressing the
INFO button and cancel it by pressing the EXIT button. The followings
screen shot shows what the information box looks like.
Additional Service Icon
Recording & Time-shifting Information
1. Service number
12. Subtitle support
2. Service name
13. Multiple audio language or
3. Channel number
audio format support
4. Channel frequency
14. Teletext support
5. Current program duration
15. Dolby audio support
6. Current program name
16. One program is recording.
7. Next program duration
17. Two programs are recording.
8. Next program name
18. Current service is recording.
9. Censorship support
19. Watching time-shifted position.
10. Locked Service
20. Signal quality
11. Pay service
21. Current time
29
STB & PVR Function
1-3. Volume Level Adjust
1-4. Soundtrack Change
With the VOL+/VOL- buttons, you can adjust the volume level of the
If the current TV program provides more than one language or audio
analog audio output. The MUTE button will turn off the analog and
format, i.e. MPEG audio and Dolby audio, together, you can select one
digital audio outputs.
and change to that setting while you are watching a TV program.
Pressing the SOUNDTRACK button on the remote control will pop up a
list box contains the languages and audio formats you can choose.
Please select an item with the UP/DOWN buttons and press the OK
button to change it. You can cancel and hide the pop-up list by pressing
the EXIT button.
NOTE
z
You can not control the volume level of the digital audio outputs if you
set the audio format as “pass-through”. Therefore you have to use
the remote control of an audio decoder (such as an amplifier) to
adjust the volume level if you are using digital audio out.
30
STB & PVR Function
1-5. Subtitle and Teletext Service
1) Subtitle Service
2) Teletext Service
If you want to view subtitles on the screen, please press the SUBTITLE
The teletext is a free service broadcasted by TV stations which gives the
button. To display the subtitle, please select “Enable” and press the OK
latest information on news, weather, television programs, share prices
button. You can hide the subtitle by selecting “Disable” with the OK
and many other topics. As the teletext service is optional, it does not
button. You can also change the subtitle language if the program
mean that all TV programs include teletext information. The DP-S1
provides more than one subtitle language. Please select a language with
support teletext service by emulating a teletext interpreter. The
the UP/DOWN buttons and press the OK button.
TELETEXT button displays the teletext pages. You can get more
information from the teletext service with the RED, GREEN, YELLOW,
BLUE and NUMERIC buttons.
NOTE
z
The subtitle function will not work if the service provider does not
provide a subtitle service.
31
STB & PVR Function
1-6. Sleep Timer
You can set the DP-S1 to turn off automatically at a specific time. Press
the SLEEP button to set the timer. The DP-S1 will only turn off after a
recording has finished even if you set it to turn off before the
completion of the current recording(s). To cancel the timer, please press
the SLEEP button successively until you set time as “0 min”.
32
STB & PVR Function
2. Service Edit
2-1. Service List Edit
You can edit the service list if you want. The followings illustrate the
editing functions you can use to edit a service list.
z
Delete: You can delete the marked service from the service list. Press
the YELLOW button to delete. You have to re-scan if you want to
watch the deleted service(s) again.
2-2. Favorite Group
Favorite group is your personal collection of TV or radio services. You
can organize up to 20 groups including three default groups.
1) Favorite Group Edit
Before you use the favorite service groups, you have to organize them.
Please refer to Chapter 8. and organize your own favorite group(s).
z
Lock/Unlock: For your privacy, you can protect certain service from
unauthorized access. If you lock a marked service with the GREEN
2) Select Service on Favorite Group
button, you have to enter the 4-digit PIN code to watch the service.
Once you organize favorite groups, you can change the services that
The LOCK icon implies that the marked service is locked. To unlock a
belong to a certain favorite group. You can display the list of favorite
service, you have to enter a 4-digit PIN code after pressing the
groups with the FAV button. As you see in the picture, the left column
GREEN button.
contains your favorite groups and the right column displays the services
33
STB & PVR Function
belong to the favorite group. Please select a favorite group in the left
column with the UP/DOWN buttons and press the OK button. Then the
cursor moves to the right column. On the right column, the services
belong to the favorite group that was selected on the left column will be
displayed. You can select a service with the UP/DOWN buttons. If you
want to change to a certain service, please press the OK button on that
highlighted service.
NOTE
z
You can also use the LEFT/RIGHT buttons to move to the “Favorite
Group” column or “Favorite Service” column.
z
You can exit from the favorite group with the EXIT button.
34
3) Add Current Service to Favorite Group
You can add the service you are watching to a favorite group. Please
display the favorite list with the FAV button and select a group where
you want to add the current service. Please press the YELLOW button
to add.
STB & PVR Function
4) Service Change on Favorite Group
If you change services using the service list when you select a favorite
group, the service list will show the services belong to that favorite
group. You can change among these services on the list.
If you want to exit from a favorite group and list up all services
available in the service list, please press the BLUE button when the
service list is displayed.
You can also exit from the favorite list by pressing the RED button when
the favorite list is displayed.
If you change services with the CH+/CH- buttons, it also changes
among the services that belong to the favorite group you selected. The
information box will indicated which favorite group is selected.
35
STB & PVR Function
3. PVR Functions
The major functions of PVR are time-shifting and recording. If you want
z
to play a recorded program, please use the multimedia contents
playback function with the FILE PLAY button on the remote control.
STOP button will skip and jump to the live position when you watch
the picture at time-shifted position.
z
PAUSE button will hold the picture until you select play again with
the PLAY button.
Chapter 6. File Playback Function will illustrate how you can play the
recorded program and edit it.
3-1. Time-shifting
You can pause and resume live TV program, and even rewind and replay
it. The time-shifting function is enabled all the time unless you disable it
in the Setup menu. The DP-S1 keeps 2-hour recording buffer of TV
program by utilizing the HDD storage. The buffer will reset if you
change to another service.
The time-shifting bar appears when you press the PAUSE or REW
button. The trick-mode operations such as rewinding, fast-forwarding,
pause and resuming are provided. If you want to jump to live from a
z
specific shifted position, please press the STOP button.
SLOW FWD button will play the recording in slower speed. The speed
will change to x1/2, x1/4, x1/8, x1/16 and x1/32 speed according to
each press of the SLOW FWD button.
z
PLAY
button will display a time-bar. And it changes to normal
z
REW button rewinds backward with x2, x4, x8, x16 and x32 speed.
z
FF button plays forward with x2, x4, x6, x8, x16 and x32 speed.
playback mode while other trick mode is enabled such as PAUSE, FF
or REW.
36
STB & PVR Function
z
LEFT
button skips and moves backward 15 seconds at a time. You
can also jump to a certain position with the LEFT button. The anchor
NOTE
z
mark moves backward while you are holding down the LEFT button.
watching a third service, the time-shift function for the third program
You can play and watch from the anchored position by releasing the
LEFT button.
z
will be disabled automatically.
z
RIGHT button skips and moves forward 15 seconds at a time. You
can also jump to a certain position with the RIGHT button. The
The time-shift buffer will be initialized if you change to other services
or go to File Play, wizTV or Setup mode.
z
anchor mark moves forward while you are holding down the RIGHT
button. You can watch from the anchored position by releasing the
If two services are being recorded simultaneously and you are
If there is less than 10 seconds of history in the time-shifting buffer
after initialization, the trick-mode operation can not work.
z
If the time-offset is less than 10 seconds from the live, the time-
RIGHT button.
shifting function may not work properly and play the live on the
z
UP button skips and moves forward 10%.
screen.
z
DOWN button skips and moves backward 10%.
z
Insertion of bookmarkers and playback with bookmarkers or instant
replaying is also possible in the time-shifting operation. Please refer
to Chapter 6. Multimedia Contents Playback for more instructions.
z
The time-shift function is not supported for radio service.
37
STB & PVR Function
3-2. Instant Recording
z
1) Start Recording
Starting Point: You can select the starting point of recording with the
LEFT/RIGHT buttons when the time-shift function is enabled. If the
You can record the current service and store it in the HDD instantly by
time-shift function is disabled, you can only record from the current
pressing the REC button. The following picture shows options you can
time.
1. Live: Start recording from the time when you press the REC
choose when you record a program.
button.
2. Current Program: Record only the current program even if there
is a previous program stored in the time-shift buffer.
3. All: Record all the programs in the time-shift buffer.
z
File Lock: You can lock the recording file if you want. The LEFT/
z
File Name: The recording will be stored on the HDD as a file with the
RIGHT buttons will change this option.
name of the current program but you can change the file name if you
want. If you press the OK button, an on-screen keyboard will pop up
and you can enter a new file name.
After setting all options, please press the REC button on the remote
z
Duration: You can change the duration of recording with the LEFT
and RIGHT buttons. The default is 120 minutes.
control or choose “Accept” button on the screen to start recording. If
you want to cancel the recording, press the EXIT button on the remote
control or “Cancel” button on the screen.
38
STB & PVR Function
NOTE
z
If you disable the time-shifting function, you can’t record a program
from the time-shifting buffer. Therefore you can only choose a single
option of “1. Live” when you intend to record a program.
z
If there is only one program in the time-shift buffer. The two options
of “2. Current Program” and “3. All” have the same meaning.
2) Trick Mode Operation
If you are watching a program while it is being recorded, you can
perform the same trick mode operations, which are explained in the
previous section of the time-shifting operation, even though you are
recording two programs simultaneously. For more information of trickmode operating, please refer to the previous section.
Therefore option “2. Current Program” does not appear.
z
You can record a radio program using the same procedure.
z
If two programs are being recorded, you can’t record another
program. In this case, a warning message will pop up.
39
STB & PVR Function
3) Pause/Resume and Stop Recording
4) Change Recording Options while Recording
If you want to skip recording for a certain period of time, i.e.,
You can change the duration of a recording or file name after the
commercial advertisements, please press the REC button while you are
recording has started. You can also lock or unlock the recording file
watching the recording service.
while you are recording the service. Press the POP-UP button and
select “Recording Information” with the OK button.
Once a pop-up page appears, please press the PAUSE button. You can
resume recording with the PLAY button. You can simply toggle the
recording state of pausing and resuming with the OK button.
To stop a recording before it stops automatically after the duration,
please press the STOP button when the recording control pop-up is
displayed.
40
STB & PVR Function
Please select a recording item with the UP/DOWN buttons to change.
If there is one recording, only one item will be displayed.
z
You can change the duration with the LEFT or RIGHT button.
z
You can change the file name with the RED button. An on-screen
keyboard will be displayed to edit the file name.
z
You can change the locking status of the recording file with the
GREEN button.
NOTE
z
You can stop the recording with the STOP button.
z
You can change to the recording service with the OK button,
41
STB & PVR Function
3-3. Timer
You can set programs which you would like to record to HDD. The timer
function can also be used to turn on the DP-S1 and watch the set
program or transmit the picture to an external recording device such as
a VCR (Video Cassette Recorder) according to your timer reservations.
You can set up to a maximum 200 timers.
1) View Timer List
You can view and check all of the timer information; modifying or delete
a timer and add a new timer to the timer list. Please choose “Timer List”
in the pop-up menu which you can access with the POP-UP button.
42
STB & PVR Function
2) Add New Timer
To add a timer, please press the RED button to display a menu on the
z
buttons and change date with the NUMERIC buttons.
screen. A new pop-up window will appear to configure the timer.
You can configure the following items with your preference for a new
Date: Set start date of recording. Move cursor with the LEFT/RIGHT
z
Start Time: Set start time. Move cursor with the LEFT/RIGHT
buttons and change time with the NUMERIC buttons.
time record.
z
Duration: Set duration of the recording with the LEFT/RIGHT
buttons.
z
Recurrence: You may set a series of timers by choosing Recurrence
option. You can choose the following options with the LEFT/RIGHT
buttons as your preference; Once, Daily, Weekend, Weekday, and
Weekly.
z
Mode: If you would like to watch a certain program or transfer it to an
external recorder instead of recording it to HDD, please choose “View”
option with the LEFT/RIGHT buttons. If you want to record a
program, please select “Record” option.
z
z
button displays an onscreen keyboard to change the file name.
Service: You can select a service to record. The default service is the
current service that you are watching. If you want to change it,
please press the OK button: a list of services will be displayed and
File Name: You can change the file name of the record. The OK
z
File Lock: You can lock the recording file. Set this option with the
LEFT/RIGHT buttons.
you can select a service with the UP/DOWN buttons then press the
Finally, you can save and finish a timer by selecting “Accept” on the
OK button. If you want to record a radio service, press the
screen. If you want to cancel the timer and exit, please select “Cancel”
TV/RARIO button to change the list to the radio services.
or press the EXIT button.
43
STB & PVR Function
3) Edit Timer
4) Delete Timer
You can modify a timer setting such as service, start date, start time,
Select a timer which you want to delete with the UP/DOWN buttons
duration, recurrence and mode. Please choose a timer with the
and press the GREEN button. A pop-up confirmation will appear and
UP/DOWN buttons on the timer list and press the OK button to change.
choose “Yes” with the OK button. If you do not want to delete a timer,
You can modify a setting the same way as described in the previous
choose “No” with the OK button or press EXIT.
section of adding a new timer. Select “Accept” with the OK button to
change the setting. Choose “Cancel” with OK button or press the EXIT
button to cancel the modification and exit.
44
STB & PVR Function
5) Turn On and Off the DP-S1 according to Timer
If a timer starts when the DP-S1 is in standby mode, the DP-S1 is
turned on automatically and performs its operation according to the
timer. Once the timer is ended, a pop-up message will appear to ask if
you are operating the DP-S1 or not. If there is no confirmation to turn
off, the DP-S1 will be turned off and go into standby mode. If you want
to use the DP-S1 continuously, select “No” on the screen and press the
OK button. You can also cancel it by pressing the EXIT button. If you
are watching a program and a timer recording has started you can not
put the DP-SI into standby until the recording has finished or is stopped
by the user.
45
STB & PVR Function
3-4. Duplicated Recording
The DP-S1 can record up to two programs simultaneously. If you intend
to record more than two programs simultaneously, a pop-up warning of
duplication will be displayed.
1) Duplication When New Recording Starts
If a new recording starts because of an instant recording or a timer
setting while the DP-S1 records two programs simultaneously, a
warning message will pop up of the duplication. In these cases, the
following pop-up will be displayed. There are two options you can
choose if duplication occurs: you can stop one of the current recordings
to let a new recording occur or a new timer start. Else you can cancel
NOTE
the new recording or timer recording and let the current two recording
z
The new recording has higher priority than the existing recordings.
finish properly.
Therefore, when a new recording starts it will stop one of the existing
To stop one of the current recordings and start a new recording, choose
recordings,
a recording to cancel with the UP/DOWN buttons and press the OK
confirmation or cancellation within 10 seconds.
button. If you don’t want to stop any recordings, press the EXIT and
cancel the new recording.
z
which
earlier
respectively,
if
there
are
no
You may not notice the warning message so make sure you organize
the timer list properly specifically if you are recording a very
important program.
46
ends
STB & PVR Function
2) Duplication When a New Timer Sets
As explained before, the DP-S1 can record two programs simultaneously.
Therefore you can not add a new timer to record three programs at the
same time. If this occurs, a pop-up list is displayed to show the list of
duplicated timers if a new timer is entered as a duplication.
In order to add a new timer when duplication occurs, please delete one
group of timers displayed in the duplication timer list. If you don’t want
to delete all of the previously set timers, please reorganize (delete
some of the previously set timers) the previous set timers and make
sure they don’t duplicate to a new timer. Press the EXIT button to
cancel adding a new timer and reorganize the timers in the timer list.
47
STB & PVR Function
4. EPG (Electronic Program Guide)
The EPG (Electronic Program Guide) is a time table of TV programs
which show upcoming programs on a network. The EPG information is
supplied by TV broadcasters as an optional service, therefore the DP-S1
can not provide a full EPG if some broadcasters do not provide this
information.
The DP-S1 supports a full 7-day EPG provided as a subscription from
IceTV. Please visit the IceTV website, www.icetv.com.au, to set your
trial account and refer to Chapter 8 to organize it on your DP-S1.
The DP-S1 supports two types of EPG interface which will be explained.
You can enter the EPG with the GUIDE button and change the EPG type
with the RED button. If you want to exit from the EPG, please press the
EXIT button.
The small screen displays the program you are watching before you
4-1. EPG with Single Service
enter to the EPG. The screen will not change when you change the
service with the LEFT/RIGHT buttons in order to prevent from
This EPG shows only one service at a time. You can change to the
refreshing the time-shifting buffer. You can check information of a
multiple-service EPG with the RED button. Programs are listed vertically
program on the message window when you place the cursor on the
by time. Therefore you can move cursor to the previous or next
program.
program with the UP/DOWN buttons. If you want to review another
You can move the cursor with the GREEN, YELLOW and BLUE buttons
service, press the LEFT/RIGHT buttons to change.
instead of pressing the UP or DOWN button continuously.
48
STB & PVR Function
4-2. EPG with Multiple Services
This EPG shows 4 services at a time. The vertical axis implies services
The small screen displays the program you watched before you entered
and the horizontal axis implies time. You can move the cursor and
the EPG. The screen will not change when you change the service or
explore the programs with the UP/DOWN/LEFT/RIGHT buttons; the
program in order to prevent from refreshing the time-shifting buffer.
UP/DOWN buttons change service. Therefore the cursor will move
You can check the information of a program on the message window
upward or downward according to the UP/DOWN buttons. The
when you place the cursor on the program.
LEFT/RIGHT buttons change time, and the cursor will move to left or
You can move the cursor with the GREEN, YELLOW and BLUE buttons
right accordingly.
instead of pressing the UP or DOWN button continuously.
49
STB & PVR Function
4-3. Service Change and Recording
1) Service Change
3) Resolving Duplication
If you want to change and watch a certain program, place the cursor on
If a new recording or timer setting produces a duplication to the current
the program you want to watch and press the OK button. This action
recordings or the timers previously set, a pop-up windows will be
automatically exits from the EPG then you will watch the program on
displayed, which is explained in the previous section. You can either
the full screen.
cancel the current recording/previous set timer, or you can cancel the
new recording/timer.
2) Recording
You can record or set a timer in the EPG with the REC button. If the
NOTE
cursor is place on the current program, the REC button enables instant
z
recording. Also if the cursor is placed on the future program, the REC
button sets a timer. Especially for future programs, you can set a timer
You can not watch a program if it is already finished or scheduled to
show in the future.
z
If it’s necessary to change the program displayed on the small
to either record or just view with consecutive inputs of the REC button.
window according to the instant recording, a pop-up message
You can not set the recurrence of recording in the EPG.
appears for you to confirmation.
If you set a recording or a timer for viewing, a red or blue dot is marked
on the program accordingly.
50
File Playback Function
6. File Playback Function
This chapter covers all functions regarding playing multimedia contents.
The DP-S1 can play movie, music and photo files stored in the internal
hard disk drive, PCs on the home network, optical disk such as DVD or
CD, USB storage devices, and memory cards. You can also play the
recording contents in this mode. You can enter this operation mode with
the FILE PALY button.
1. Exploring Contents
To provide a user-friendly interface, the main menu is structured in
three parts; the first part is a top (horizontal) menu where you can
select a type of contents to play. The second part is a left (vertical)
menu where you can select a storage or device where the contents are
stored. The last part is a file list where you can view and select files and
folders.
The following picture shows the main menu and illustrates the structure.
A step-by-step explanation will be provided to help you understand its
operation.
51
File Playback Function
1) Step 1: Select Content Type
With the LEFT/RIGHT buttons, you can select a content type you want
to play. If you select “Movie” icon on the top menu, only the movie files
will be displayed on the screen even though a folder or device contains
other type of contents such as music or photo. You can also choose
“Music” or “Photo” icon with the LEFT/RIGHT buttons.
2) Step 2: Select Storage
With the UP/DOWN buttons, you can select a device to access. As you
select a device, folders and files stored in that device will be listed on
the screen. There are five icons on the left menu and each icon has the
following meanings:
z
ODD: If you insert a DVD title in the tray, the DP-S1 will play the
contents automatically. If you insert other multimedia CD or DVD, you
z
HDD: You can access the internal hard disk drive by choosing “HDD”
have to select the file you want to play. The folders and files will be
icon. The recorded programs of TV and Radio will be stored in the
“Recording” folder.
z
listed on the screen if you select “ODD” icon.
z
USB: You can access any USB devices connected to the DP-S1 by
Network: A list of PCs or network devices connected to your home
selecting “USB” icon on the left menu. If there is more than one USB
network will be listed if you select this icon. Press the RED button to
devices, all the devices will be listed on the screen.
scan and update PCs connected to your home network. Please be
sure that the device has at least one shared folder to access and
share contents.
z
Memory Card: If you insert a memory card to the DP-S1, you can
access to it with this icon.
The top icon on the left menu implies a play-list where you can put files
temporarily as your preference. You can organize one play list per each
52
File Playback Function
content type; movie, music and photo. This will be explained in greater
from it. However you can not change a device on the left menu with
detail in the following section.
the UP/DOWN buttons unless you exit.
z
The USB device must be compatible with the USB 2.0 standard.
z
If there is no device listed on the screen after scanning, please check
3) Step 3: Exploring Folders and Files
Once you select a content type, i.e., “Movie” and storage or device, i.e.,
the network connection and make sure its set and configured properly.
z
“Network”, press the OK button to enter the list of folders and/or files
You can scan a specific network device with its IP address. Please
press the GREEN button and enter the IP address of the device.
(the file list). In the file list, the UP/DOWN buttons move the cursor
upward or downward to select a folder or file. Please remember that the
UP/DOWN buttons do not change your selection of the storage type,
i.e., “HDD” on the left menu in this operation mode. If you want to
change the storage type, you have to exit from the file list with the
EXIT button.
You can play content with the OK or PLAY button. More information of
playback by content types will be supplied later.
NOTE
z
There are two operation modes for exploring contents; in the first
operation mode, you can select an icon (content type) on the top
WARNING
menu with the LEFT/RIGHT buttons and an icon (device) on the left
menu with the UP/DOWN buttons. The second operation mode you
z
z
Each USB port can supply maximum of 500mA to the external device.
can enter with the OK button is selecting a folder or file.
Connecting devices consuming more than 500mA can damage the
You can change the content type while you are exploring folders and
DP-S1 if there is no additional power supplier to the USB device.
files in a list of files with the LEFT/RIGHT buttons without exiting
53
File Playback Function
2. Contents Playback
2-1. Movie Playback
NOTE
To play a movie, please select the “Movie” icon on the top menu and
z
format.
select what you want to play on the file list; as explained in the
previous section, select a device or storage on the left menu with the
z
If you want to play the previous or next file as you are watching a
movie, please press the PREV or NEXT button.
OK button to enter the file list. You can choose a file or folder with the
UP/DOWN buttons on the file list. Once you choose a file, please press
It takes a few minutes to start playing depending on the content
z
A certain movie content could not play as it depends on the content
format.
the PLAY or OK button to play the file.
z
If you are recording a service, the playback of high-definition movie
content can be limited.
z
The DP-S1 plays the successive file in the same folder after playing a
file unless you press the STOP button.
54
File Playback Function
1) Trick Mode
Powerful trick-operation is supported while you watching a movie.
z
PLAY button will display a time-bar. It changes to the normal
playback mode while other trick mode is enabled such as PAUSE, FF
or REW.
z
PAUSE button will hold the picture until you play again with the
PLAY button.
z
SLOW FWD button will play in slower speed than the normal speed.
The speed will change to x1/2, x1/4, x1/8, x1/16 and x1/32 speed
according to each input of the SLOW FWD button.
z
REW button rewinds backward with x2, x4, x8, x16 and x32 speed.
z
FF button plays forward with x2, x4, x8, x16 and x32 speed.
z
LEFT button skips and moves backward in 15 seconds. You can also
NOTE
jump to a certain position with the LEFT button. The anchor mark
z
moves backward while you are pressing the LEFT button. You can
The trick mode operation can not always be supported as it depends
on the content format.
play and watch from the anchored position by releasing the LEFT
button.
z
RIGHT button skips and moves forward 15 seconds. You can also
jump to a certain position with the RIGHT button. The anchor mark
moves forward while you are pressing the RIGHT button. You can
watch from the anchored position by releasing the RIGHT button.
55
File Playback Function
2) Subtitle
The DP-S1 can decode and display subtitles from a subtitle file. To play
You can adjust the position of the subtitle with the UP/DOWN buttons
a movie with subtitle, please copy the subtitle file to the same folder of
while the subtitle control window is displayed. If the subtitle is out of
the movie file and give the same file name as the movie file. The DP-S1
sync, you can adjust the sync with the LEFT/RIGHT buttons.
automatically display subtitle when you play a movie with the OK or
PLAY button.
NOTICE
z
You can hide the subtitle if you do not want to display. Please press the
SUBTITLE button and press the OK button. You can also display the
subtitle in the same manner.
56
The DP-S1 support the following subtitle formats; smi, sub and srt.
File Playback Function
2-2. Music Playback
You can play music the same way you play a playing movie; please
select the “Music” icon on the top menu to play music. You can utilize
the same trick operation for playing music which is described in the
previous section for playing a movie.
You can play the previous or next file with the PREV or NEXT button.
NOTE
z
The DP-S1 plays all music files in a folder repeatedly unless you press
the STOP button.
57
File Playback Function
2-3. Photo Playback
To play photo files, please select the “Photo” icon on the top menu.
Once the DP-S1 play a photo file, it will play all photos in the folder
successively. You can play the previous or next photo manually with the
PREV or NEXT button.
If you press the INFO button, a help message will display. You can stop
the auto-slide show with the PAUSE button and resume with the PLAY
button. You can change the slide with the PREV or NEXT button in the
manual mode. You can also hide the help message with the INFO
button.
58
NOTE
z
The DP-S1 plays all photo files in a folder continuously unless you
press the STOP button under the auto-slideshow mode.
File Playback Function
2-4. Play-list
NOTE
The play-list is a personal collection of multimedia contents, which
stores the list of files temporarily. You can organize a separate play-list
z
If you can not put a folder on the play-list. You have to select all files
of a folder and put them to the play-list.
for each media content type: movie, music and photo.
1) Add File to Play-list
2) View Files in Play-list
You can organize a play-list and enjoy the contents. Please place the
cursor on a file you want to put to the play-list and press the YELLOW
You can check files in the play-list by selecting the “PLAY-LIST” icon on
button: the file will be listed on the play-list. If you want to put more
the left menu with the OK button. Files in the play-list will be listed on
than one file to a play-list at once, choose files with the BLUE button
the screen.
one by one and press the YELLOW button. “Check” icon indicates that
the file is selected.
59
File Playback Function
3) Play from play-list
2-5. DVD Playback
You can play files in the play-list by pressing the OK or PLAY button. If
If you select the “ODD” icon on the left menu while a DVD title is loaded
you change to the previous or next file in the play-list, press the PREV
on the tray, the DP-S1 will display a confirmation pop-up to play the
or NEXT button.
title. Please press the OK button to play the DVD title.
4) Remove File from Play-list
You can remove a file from the play-list with the YELLOW button the
same way as adding a file to a play-list. Select the “PLAY-LIST” icon on
the left menu and choose a file which you want to remove from the
play-list. You can also use the BLUE button to remove more than one
file at once.
60
Internet Services
7. Internet Services
The DP-S1 is designed to support various Internet services, however
this will be updated at a later time. You can get the latest information
for the DP-SI by visiting the website, www.beyonwiz.com.au.
61
Advanced Setup
8. Advanced Setup
As an extension to Chapter 4. Quick Setup, this chapter illustrates how
to configure your DP-S1. The MISCLLANEOUS and MANAGEMENT parts
will be explained. In this chapter as they were the remaining two items
that were not explained previously.
1. Miscellaneous
The setup menu is grouped in four parts: CONFIGURATION, NETWORK,
MISCELLANEOUS and MANAGEMENT. The first two groups are explained
in Chapter 4. In this chapter the last two parts will be illustrated.
As explained before, press the SET-UP button to enter the setup menu.
As you select MISCELLANEOUS icon on the top menu, three items of
Favorite, Access Control and Preference will be listed on the left menu
bar.
62
Advanced Setup
1-1. Favorite
Before using the favorite service groups, you have to organize them.
A favorite group can not contain TV services and radio services together.
The edit page consists of three columns: Group, Fav. Service and All
Therefore, you have to specify as TV or radio group when you make a
Service. Once you enter into the list with the OK button, you can place
new group. TV and RADIO icons indicate the property of each group.
the cursor on one of the three columns with the LEFT and RIGHT
z
buttons.
Add Group: You can add a new group with the RED button. If you
press the RED button when the cursor is place on the “Group” column,
a screen-keyboard pops up and you can input the group name.
1) Group
z
The first column contains the list of your favorite groups. You can
Rename: To change the name of the existing group, press the GREEN
button after placing the cursor on the group. a screen-keyboard pops
organize up to 20 favorite groups.
up and you can modify the name.
z
Remove: Press the YELLOW button to delete a group. If you press
the YELLOW button, a confirmation pop-up screen will display to get
your confirmation to delete. If you do not want to delete a group,
press the EXIT button.
z
Move: You can organize the order of the favorite groups with the
BLUE button.
NOTE
z
A favorite group can contain only one type of services; TV or radio.
z
When you add the first service to a new favorite group, the favorite
group becomes a TV group or radio group depending on the first
You can also add a new group, and delete or rename an existing group.
service type.
63
Advanced Setup
2) Favorite Service
3) All Service
According to your selection of the favorite group in the first column, the
The third column shows all services which you can access. This list
services belonging to the favorite group will be displayed on the second
shows all the service of TV or radio. With the TV/RADIO button, you
column. You can remove a service from the favorite group with the OK
can change this list to TV service list or radio service list. If you want to
button.
add a service to a certain favorite group, select a favorite group in the
first column and select a service in the third column with the OK button.
You can check if the service is added successfully on the second column.
64
Advanced Setup
1-2. Access Control
You can set a PIN number to access certain set-up menus. After setting
2) Access Control
You can lock the following setup menus.
a PIN number, you have to re-enter the PIN number to enter the menu
again.
1) Set PIN Number
You can set 4-digit PIN number with the NUMERIC buttons. For safety,
you have to enter the number twice to set a new PIN number.
z
Censorship: If you set this, you have to enter the PIN number when
you watch a program with higher censorship level.
z
Start-up: If you set this, you have to enter the PIN number when you
turn on the DP-S1.
z
Setup Menu: If you set this, you have to enter the PIN number when
you access to Setup menu.
NOTE
z
The default PIN number is 0000.
65
Advanced Setup
z
Time Setting Menu: If you set this, you have to enter the PIN number
when you change the time and date setting.
z
Network Configuration Menu: If you set this, you have to enter the
PIN number when you change the network configuration.
z
Service Scan Menu: If you set this, you have to enter the PIN number
to scan service.
z
Factory Setting Menu: If you set this, you have to enter the PIN
number to set your DP-S1 as factory-default setting.
To change the configuration, press the OK button to get a pop-up menu
to change the configuration. Please select with the UP/DOWN buttons
and press the OK button to select. If you do not want to change, press
the EXIT button.
66
Advanced Setup
1-3. Preference
1) Time-shifting
If you don’t want to use the time-shifting function, you can disable it.
Please select “Time-shifting” and press the OK button. You can select
“Disable” on the pop-up menu screen. The default configuration is
“Enable”.
67
Advanced Setup
2. Management
You can upgrade or initialize your DP-S1 in this menu.
2) Firmware Upgrade
You can upgrade your DP-S1 with the latest firmware. Please visit the
website, www.beyonwiz.com.au, for firmware information. If you wish
2-1. F/W Upgrade
to upgrade please download the latest firmware.
1) Firmware Information
Before upgrading the firmware, you can check the information and last
update. Press the OK button to get the information: System Identity,
Firmware Version and Last Update. You can exit with the EXIT button.
The DP-S1 can upgrade firmware which is stored on a USB device, CD
or PC in a network. Please select the firmware upgrade on the file list
and press the OK button to start. It takes several minutes to complete
upgrading. Please make sure that your DP-S1 is NOT turned OFF until it
finishes upgrading.
68
Advanced Setup
After the DP-S1 upgrades the firmware, it will restart automatically. You
may check the status on the screen and front display window.
NOTE
z
If you cannot visually see the firmware upgrading from your PC or
device, please check the network configuration of your PC and DP-S1.
z
While the DP-S1 is upgrading the firmware, it should NOT be turned
off.
69
Advanced Setup
2-2. HDD
1) HDD Information
2) HDD Format
If you select this menu with the OK button, a pop-up window will
You can delete all files on the HDD. If you select this menu with OK
display a summary of the internal HDD. You can also check the usage of
button, a confirmation pop-up displays. If you select “OK” on the screen
the HDD. To close the pop-up window, press the EXIT button.
and press the OK button, the DP-S1 will restart and format the HDD
automatically. If you do not want to format the HDD, please select “No”
on the screen and press the OK button, or press the EXIT button.
NOTICE
z
You have to wait until the DP-S1 formats the HDD successfully, it
takes several minutes. The front display shows the status. Do NOT
TURN OFF the unit until this function has finished
70
Advanced Setup
2-3. Initialize
1) Clear Service Information
2) Factory Setting
You can clear all the service information. If you select this with the OK
If factory setting is selected, the DP-S1 will erase all information and
button, a pop-up window will be displayed to get your confirmation. If
reset itself to the factory configuration. If you select this with the OK
you select “YES” all services will be deleted and you will have to rescan
button, a pop-up window will display to get your confirmation. If you
them again. Otherwise select “NO” or press the EXIT button to return to
select “YES” the DP-S1 will reset all data to the factory configuration.
the initialize menu.
Otherwise select “NO” or press the EXIT button to return back to the
initialize screen.
NOTE: After a factory setting all services must be retuned before
viewing.
71
Set Remote Control
9. Set Remote Control
2. Manual Set
The remote with the DP-SI can control other brands. If you wish to
You can set your remote control with 3-digit code manually. Please look
control your TV, please press the TV button. After this, the red-
at the following table and find the brand of your TV.
backlight of the TV button will flash when you press the buttons to
Turn on your TV then press and hold the TV button until the red-
indicate that the remote control works for your TV.
backlight turns on. Please point the remote control at your TV and enter
There are two ways to program the remote control to work with your TV,
the 3-digit code with the NUMERIC buttons. Wait until the red-
automatic code search or manual set.
backlight blanks three times. If your TV turns off automatically, your
remote control is ready to use for your TV. If your TV does not turns off,
1. Automatic Code Search
press the TV button and enter another code from the table under that
brand.
Please turn on your TV then press and hold the TV button until the red-
FUJITSU
backlight turns on. Please point the remote control at your TV and click
208
223
224
218
253
261
286
307
325
329
410
422
423
206
207
208
215
218
229
231
232
236
238
240
244
253
256
286
287
292
298
299
300
301
304
305
306
307
309
3123
314
315
316
317
325
358
367
381
382
383
384
399
405
406
407
410
411
the UP button. After the red-backlight of the TV button blinks, please
wait at least 3 seconds to check your TV turns off or not. If your TV
turns off automatically, your remote control is ready to use for your TV.
If your TV does not turns off, please repeat clicking the UP button until
your TV turns off. Once your TV turns off after you click the UP button,
please press the OK button. The TV button blinks three times to
indicate that the remote control is set.
72
HITACHI
Set Remote control
JVC
207
212
247
264
323
208
215
224
229
253
286
307
344
374
385
387
410
412
205
207
208
215
224
229
248
253
286
389
208
210
211
212
213
214
216
220
230
236
237
239
242
244
245
255
258
260
278
279
286
307
309
384
410
208
244
246
286
287
307
374
376
380
410
205
206
208
209
215
216
218
224
229
253
260
270
277
286
287
296
325
337
374
410
385
LG
NEC
PANASONIC
PIONEER
SAMSUNG
NOTE
z
If your TV brand is not listed on above, please visit the following
website to get the correct code if available: www.beyonwiz.com.au.
z
Your remote will not always be compatible with all branded televisions.
If this remote doesn’t work or no code exists, please obtain the
original remote from the manufacture of your TV.
412
SHARP
207
209
230
245
384
SONY
206
207
208
225
230
264
272
285
286
329
345
405
THOMSON
424
426
430
208
258
286
73
Warranty Conditions
Warranty Conditions
1. Where required by Beyonwiz only the original invoice/receipt issued by the dealer will be accepted as proof of purchase.
2. Beyonwiz may reject warranty claims on equipment which it believes to be illegally acquired or when the “owner” is unable to provide proof of purchase
or where security labels or serial numbers have been tampered with or removed.
3. The warranty covers only defects in the material and workmanship of the product for a period of 12months from the date of original purchase.
4. This warranty is on “Return to Base” basis. The owner is responsible for the delivery of the equipment to the point of purchase and for collecting the
repaired or replaced equipment from the same location.
5. The warranty is void if failures arise as a result of any of the following. i) Abuse, misuse, physical impact, normal wear and tear. ii) Alteration or repairs
carried out with out written authorization from Beyonwiz. iii) Upgrade that are not registered by Beyonwiz iv) Operating or maintained other than in
accordance with the manual supplied.
6. This equipment will not be considered defective as a result to incompatibility with other equipment or accessories other than the ones supplied with the
unit at the time of purchase.
7. This unit should be returned in its original carton and protective packaging or alternatively in a packing suitable to prevent damage. Beyonwiz will not
accept any responsibility for goods damaged whilst the goods are in transit.
8. Repair or replacement under the terms of this warranty does not give the right to extension or a beginning of a new warranty period. Repairs or
replacements may be carried out with functionally equivalent reconditioned parts or equivalent part. Parts that have been replaced become the property
of Beyonwiz.
9. The customer acknowledges that no promise representation or undertaking has been given by Beyonwiz or its dealer in relation to equipment other than
as contained in this warranty.
10. A service charge will apply if the fault is not covered within the conditions of this warranty or if there is no fault found. The charge will be based on the
current market rate.
11. Beyonwiz is not liable for any other loss other than the unit itself.
12. Nothing contained in this warranty shall be read or applied so as to affect the right of the consumer in relation to the provisions of the trade practices
act or other statutory rights provided by legislation of the state or territory. In the absence of applicable legislation this warranty will be purchases sole
and exclusive remedy and neither Beyonwiz nor its distributors or agents shall be liable for any incidental or consequential damages for breach of any
express or implied warranty of this equipment.
a