Operating instructions | Bifinett KH 1155 Scale User Manual

Bifinett KH 1155_UK.qxd
11.12.2003
14:17 Uhr
Seite 1
7
Max.5Kg/11lb Min.10g/0.4oz d=1g/0.1oz
KG/LB
Z/I
6
5
5
4
3
2
1
A
Max.5Kg/11lb Min.1kg70.4oz d=1g/0.1oz
KG/LB
Z/I
B
Bifinett KH 1155_UK.qxd
11.12.2003
14:17 Uhr
Seite 2
Safety Instructions
!
Important
Obey the following safety instructions exactly.
Failure to obey these instructions can result in damage to the
scale and voids your warranty claims.
➩ When inserting the battery, make certain to correctly align the
battery poles, and do not use force when connecting the battery
➩ Remove the battery when you do not use the scale for a longer
period of time.
➩ Replace an empty battery punctually.
➩ Never place more than 5 kg on the scale.
➩ Make certain that liquids never enter into the
scale
➩ Avoid contact with solvents and corrosive or abrasive cleansers.
➩ Only place the scale on a flat and firm surface.
➩ Never place anything on the display.
➩ Do not press the buttons with force or sharp objects.
➩ Do not subject the scale to high temperatures or magnetic
fields.
Proper Use
The Bifinett KH 1155 kitchen scale can be used to weigh noncorrosive, non-abrasive fluids and solids in private households.
Weighing of medications and unapproved materials is considered
improper use.
Description
The Bifinett KH 1155 is equipped with:
➩ Automatic cut-out,
➩ Tare function (zeroing the display),
➩ Overload indicator,
➩ Battery charge indicator,
➩ Temperature display,
➩ Count-down timer (up to 99 minutes) and
➩ Grams/ounces setting.
Operating Elements
Figure A
On/off button
Z/T button (ZERO/TARE) Clock button
KG/LB button grams/ounces switch)
Delivery Contents
Figure B
• Bifinett KH 1155 kitchen scale
• Bowl • Operating instructions (not shown)
• Warranty slip (not shown)
Display
Bifinett KH 1155_UK.qxd
11.12.2003
14:17 Uhr
Seite 3
Cleaning
!
Important!
Make certain that no liquids enter into the
scale. Penetrating liquids can damage the
scale.
Wash the scale with a light cloth moistened with mild soap suds.
Never use abrasive agents or solvents.
Operation
Inserting the Battery
➩ Open the battery compartment cover on the underside of the
scale.
!
Weighing
i If you switch on the scale then place the bowl on the
weighing plate, the weight of the bowl is displayed.
If you place the bowl on the scale then switch on the scale, the
weight of the bowl is not displayed.
If the display does not automatically show "0", press the Z/T
button once.
➩ Place the bowl on the weighing plate.
➩ Press the on/off button to turn on the scale.
➩ Set the desired unit (grams/ounces). To do this, press the
KG/LB button .
The configured unit appears beneath the wieght value in the display.
The scale shows the weight "0" and ZERO appears in the display.
➩ Add the material to be weighed to the bowl.
The weight is shown on the display.
i If you would like to switch the display between grams and
Poison hazard!
Batteries can be swallowed by children and endanger their
health. Keep batteries out of the reach of children.
➩ Connect a 9 V battery.
➩ Close the battery compartment cover until it snaps into place.
ounces, press the KG/LB button.
Bifinett KH 1155_UK.qxd
11.12.2003
14:17 Uhr
Seite 4
Adding & Weighing (Tare Function)
You can set the scale to 0 in order to weigh additional partial
quantities.
➩ To do this, press the Z/T button once.
The scale once again shows 0 grams and TARE appears in the
display .
➩ Add the material to be weighed to the bowl.
The weight of the added material is shown in the display.
i You can repeat this step multiple times.
However, never place more than 5 kg on the scale.
Removing Materials
➩ Press the Z/T button once.
The scale once again shows 0 grams and TARE appears in the
display .
➩ Remove the desired quantity of material.
The weight value of the removed material appears in the display
as a negative value.
i You can repeat this step multiple times.
4
Setting the Timer
➩ Press the clock button once.
The bell symbol appears in the display next to the clock.
➩ Set the desired time with the Z/T and KG/LB buttons.
You can set the time in 10 second steps.
➩ Press the clock button to start the timer.
You can stop the timer.
➩ Press the clock button once.
You can reset the timer.
➩ Press the clock button twice.
When the configured time has elapsed, a signal tone sounds for
60 seconds. This tone can be shut off by pressing the on/off
button .
Temperature Display
When the scale is switched on, the display shows the temperature in °C in the upper right.
Switching Off the Scale
If you do not weigh anything for 90 seconds, the automatic cutout switches off the scale.
➩ To switch it off manually, press the on/off button .
Bifinett KH 1155_UK.qxd
11.12.2003
14:17 Uhr
Seite 5
Troubleshooting
➩ When the display shows "Err", the device is overloaded.
Remove the material from the scale. Never place more than 5
kg on the scale.
➩ If the display briefly shows "OL" and the scale cannot be switched on, the scale is overloaded. Remove the material from
the scale and switch the scale on again. Place less than 5 kg
on the scale.
➩ If your scale does not function as expected, replace the battery. Should this not correct the faulty functioning, please contact the manufacturer.
➩ When the display shows "LO", the battery is low. Replace the
battery.
Disposal
Dispose of used batteries or the Bifinett KH 1155 kitchen scale
through a certified disposal company or your community disposal
company. Never put used batteries or the kitchen scale into
normal household waste.
Obey the currently applicable regulations. In case of doubt,
contact your disposal company.
Technical Data
Weighing range
10 g-5000 g, in 1 gram steps
Temperature display
0 °C-40 °C, in 0.5 °C steps; with ± 2 °C tolerance
Power supply
9 V battery
Warranty and Service
The warranty conditions and the service address can be found on
the warranty slip.
Conformity Declaration and Manufacturer
Kompernaß Handelsgesellschaft mbH,
Burgstraße 21, D-44867 Bochum, Germany,
hereby declares this product to be in accordance with the
following standards and directives:
• Low Voltage Directive 73/23/EEC
• EN 60,335-1
• Electromagnetic Compatibility (EMC) Directive 89/336/EEC
• EN 55 014-1
• EN 55 014-2
• EN 61 000-3-2
• EN 61 000-3-3
Type of Appliance/Type: KH 1155
Bochum, 17 October 2003,
Hans Kompernaß,
Managing Director
3
Bifinett KH 1155_UK.qxd
11.12.2003
14:17 Uhr
Seite 6
IDNr.: KH1155-11/03-V3
www.kompernass.com
Bifinett KH 1155_UK.qxd
11.12.2003
14:17 Uhr
Seite 7
KH 1155
Operating Instructions
UK
Download PDF

advertising