User`s guide | Bissell 1623 Carpet Cleaner User Manual

PowerSteamer®
Powerbrush Select
USER’S GUIDE
1623 SERIES
3
Safety Instructions
4
Product View
5
Assembly
6
Special Features
7-11 Operation
12 Maintenance and Care
13 Troubleshooting
14 Consumer Services
14 Replacement Parts
15
Additional Accessories
16 Warranty
ug120-4073_1623_908.indd 1
10/14/08 12:59:28 PM
Thank you for buying a BISSELL deep cleaner
We’re glad you purchased a BISSELL deep cleaner. Everything we know about
floor care went into the design and construction of this complete, high-tech
home cleaning system. By purchasing this product you are helping BISSELL with
our commitment to reducing our impact on the environment through an expanding range of sustainable design efforts.
Your deep cleaner is well made, and we back it with a limited one-year warranty. We
also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a
global leader in the design, manufacture, and service of high quality homecare
products like your deep cleaner.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
22
www.bissell.com
ug120-4073_1623_908.indd 2
800.237.7691
10/14/08 12:59:28 PM
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions
should be observed, including the following:
Read all instructions before using your PowerSteamer®
WARNING: To reduce the risk
of fire, electric shock, or injury:
■ Do not immerse.
■ Use only on surfaces moistened by cleaning process.
■ Always connect to a properly grounded outlet.
■ See Grounding Instructions.
■ Unplug from outlet when not in use and before
conducting maintenance or troubleshooting.
■ Do not leave machine when it is plugged in.
■ Do not service machine when it is plugged in.
■ Do not use with damaged cord or plug.
■ If appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped into
water, have it repaired at an authorized Service Center.
■ Use indoors only.
■ Do not pull or carry by cord, use cord as a handle, close
door on cord, pull cord around sharp corners or edges, run
appliance over cord, or expose cord to heated surfaces.
■ Unplug by grasping the plug, not the cord.
■ Do not handle plug or appliance with wet hands.
■ Do not put any object into appliance openings, use with
blocked opening, or restrict air flow.
■Do not expose hair, loose clothing, fingers or body
parts to openings or moving parts.
■ Do not pick up hot or burning objects.
■ Do not pick up flammable or combustible materials
(lighter fluid, gasoline, kerosene, etc.) or use in the
presence of explosive liquids or vapor.
■ Do not use appliance in an enclosed space filled with vapors
given off by oil base paint, paint thinner, some moth proofing
substances, flammable dust, or other explosive or toxic vapors.
■ Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, gasoline, etc.).
■ Do not modify the 3-prong grounded plug.
■ Do not allow to be used as a toy.
■ Do not use for any purpose other than described in
this User’s Guide.
■ Do not operate the appliance unless the belt door is
securely assembled in the location provided.
■ Do not unplug by pulling on the cord.
■ Use only manufacturer’s recommended attachments.
■ Use only cleaning products formulated by BISSELL for
use in this appliance to prevent internal component
damage. See the cleaning fluid section of this guide.
■ Keep openings free of dust, lint, hair, etc.
■ Do not point attachment nozzle at people or animals
■ Keep appliance on a level surface.
www.bissell.com
ug120-4073_1623_908.indd 3
■ Turn off all controls before unplugging.
■ Be extra careful when cleaning stairs.
■ Close attention is necessary when used by or
near children.
■ WARNING: The power cord on this product contains
lead, a chemical known to the State of California to
cause birth defects or other reproductive harm.
WASH HANDS AFTER HANDLING.
SAVE THESE
INSTRUCTIONS.
This model is for household use only.
Commercial use of this unit voids the
manufacturer’s warranty.
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded
wiring system. If it should malfunction or break
down, grounding provides a safe path of least
resistance for electrical current, reducing the risk of
electrical shock. The cord for this appliance has an
equipment-grounding conductor and a grounding
plug. It must only be plugged into an outlet that is
properly installed and grounded in accordance with
all local codes and ordinances.
Grounded
Outlets
Grounding Pin
WARNING:
Improper
connection of the equipment-grounding
conductor can result in a risk of electrical
shock. Check with a qualified electrician
or service person if you aren’t sure if the
outlet is properly grounded. DO NOT MODIFY
THE PLUG. If it will not fit the outlet, have a
proper outlet installed by a qualified electrician. This appliance is designed for use on a
nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug
in the drawing above. Make certain that the
appliance is connected to an outlet having
the same configuration as the plug. No plug
adapter should be used with this appliance.
800.237.7691
3
10/14/08 12:59:28 PM
Product view
Cord Clip
Spray Trigger
Ergonomically
Designed Handle™
Quick Release™
Cord Wrap
Hose Secure Latch
Tough Stain Tool
Ready-to-use Hose
Handle Assembly
Power Cord
2-in-1 Crevice Tool
Upper Body
Assembly
Easy Carry
Handle
2-in-1 Tank™ with built
in measuring cup
Large, Easy-To-Maneuver
Wheels
Lower Body
Assembly
Power Switch
Handle Release
Ready Tools™ Dial
Belt Access Door
WARNING:
To reduce the risk of fire and electric
shock due to internal component damage,
use only BISSELL cleaning fluids
intended for use with the deep cleaner.
Non-BISSELL cleaning solutions may
harm the machine and void the warranty.
Cleaning fluid
Removable
Nozzle
Dirtlifter®
PowerBrush
Edge Sweep™
Brushes
Keep plenty of genuine BISSELL Fiber Cleansing Formula™ on hand so you can clean and protect
whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL
cleaning solutions may harm the machine and will void the warranty.
48 oz. BISSELL
Fiber Cleansing
Formula™ with
Scotchgard™
Protector
item # 0710
4
48 oz. BISSELL
Multi- Allergen
Removal™
Formula™ with
Scotchgard™
Protector
item # 0720
www.bissell.com
ug120-4073_1623_908.indd 4
48 oz. BISSELL
Pet Odor and
Soil Removal™
Formula with
Scotchgard™
Protector
item # 0730
48 oz. BISSELL
Natural Orange
Extract Formula
with Scotchgard™
Protector
item # 0740
48 oz. BISSELL
Lavender Essence
Formula with
Scotchgard™
Protector
item # 0750
43 oz. BISSELL
3X Concentrated
Fiber Cleansing
Formula with
Scotchgard™
Protector
# 0716
32 oz.
BISSELL
Hard Floor
Solutions™
Formula
item #
0482
22 oz.
BISSELL
Tough Stain
PreCleaner™
item #
0400
800.237.7691
10/14/08 12:59:32 PM
How to use this guide
This user’s guide has been designed to help
you get the maximum satisfaction from your
BISSELL deep cleaner. You’ll find assembly
and operating instructions, safety precautions,
as well as maintenance and troubleshooting
instructions. Please read this user’s guide
thoroughly before assembling your deep
cleaner.
Your deep cleaner comes in five easy to
assemble components:
• Handle assembly
• Upper body assembly
• Upper hose rack
• Lower body assembly
• Lower hose rack
Three Phillips head screws are included and
can be found taped to the handle assembly.
W
arning:
Do not plug in your cleaner
until you have completely
assembled it per the
following instructions
and are familiar with all
instructions and operating
procedures.
Tip: Deep cleaning carpeting
regularly can reduce dust and allergens
in your home.
1.
Assembly
The only tool you will need to assemble your
cleaner is a Phillips head screwdriver.
1. Slide upper body assembly onto lower
body and secure with two screws.
2.
With the “tabs” on upper hose rack
pointing toward top of handle, attach upper
hose rack to handle assembly by sliding it to
top of handle until it can go no further. Turn
hose rack until it snaps into place.
3.
Slide handle assembly down into upper body
until it will go no further and secure with
screw.
4.
Attach lower hose rack to back of upper
body by pushing into open slots and sliding
down until it snaps into place.
5.
Wrap flex hose around hose rack and secure
it into notched out holder as shown.
6.
Keep flex hose locked in place with hose
secure latch.
2.
Tab
Upper Hose Rack
3.
4.
5.
6.
Hose
Secure
Latch
Notch
www.bissell.com
ug120-4073_1623_908.indd 5
800.237.7691
5
10/14/08 12:59:34 PM
Special features of your BISSELL deep cleaner
Your BISSELL deep cleaner is a home cleaning
system that uses a combination of hot tap water,
BISSELL advanced cleaning formula, brush
agitation and suction to safely clean carpets.
DirtLifter® PowerBrush
The DirtLifter PowerBrush is designed to
enhance cleaning performance. The bristle
pattern safely lifts out the deep down dirt while
gently grooming carpet fibers. The floating
suspension self-adjusts to all carpet heights.
When the power is ON and the machine is in
the upright position, your carpet is protected
because the brushes are lifted up off the carpet.
Ready Tools™ Dial
Warning:
To reduce the risk of fire, use only
BISSELL advanced deep cleaning
formula for full size machines in your
deep cleaner. Use of cleaning
formulas that contain lemon or
pine oil may damage this appliance
and void the warranty. Chemical
spot cleaners or solvent-based soil
removers should not be used. These
products may react with the plastic
materials used in your deep cleaner
causing cracking or pitting.
The Ready Tools feature allows you to choose
between FLOOR CLEANING or cleaning with
TOOLS simply by turning the dial. The TOOLS
setting allows for above floor cleaning of
upholstery, stairs, creases along baseboards, and
other hard to reach areas. Simply choose the tool
that is appropriate for the job, attach to flex hose
and you are ready to go.
ReadyTools Dial
Measuring cup
Your deep cleaner is equipped with a measuring
cup for adding the proper amount of formula to
the 2-in-1 tank. For convenience the measuring
cup is built into the lid of the 2-in-1 tank.
2-in-1 water tank
Our 2-in-1 water tank system is designed with a
heavy duty bladder inside for clean water. As you
clean, the clean water in the bladder will empty
and mix with the cleaning formula. Dirty water
pulled out of your carpet will collect around the
outside of the bladder so clean and dirty water
are always kept separate. This allows the user to
maximize tank space, yet only carry one tank to
and from the sink for emptying and filling.
Measuring Cup
Carry Handle
ATTENTION:
Some Berber carpets have a tendency to fuzz with wear.
Repeated strokes in the same area with an ordinary
vacuum or deep cleaner may aggravate this condition.
6
www.bissell.com
ug120-4073_1623_908.indd 6
800.237.7691
10/14/08 12:59:35 PM
Operation
Before you clean
1.
Plan activities to give your carpet time to dry.
2.
Move furniture to another area if cleaning
an entire room (optional).
3.
Vacuum area with a dry vacuum cleaner
before deep cleaning.
4.
5.
EXIT
12
5
Plan your cleaning route to leave an exit path. It
is best to begin cleaning in the corner farthest
from your exit.
9
10
11
7
6
2
4
3
1
T
STAR E
HER
3'
4'
Pretreating (optional)
Pretreating is recommended to improve cleaning
effectiveness for heavily soiled carpet in high traffic
areas such as entry ways and hallways.
To pretreat:
A. Using the BISSELL Tough Stain
Pre-cleaner, generously spray evenly
over soiled area, do not overwet.
B. Wait 3-5 minutes before deep cleaning.
C. Clean as normal using your BISSELL deep
cleaner, following the instructions below.
Fill the 2-in-1 water tank
1.
2.
3.
Remove the tank from the base of the machine
by lifting the tank carry handle.
Carry like a bucket to the sink. Rotate the handle
forward to unlatch the lid. Remove lid, turn over
and locate built in measuring cup.
Fill formula to the indicated fill line on the
built in measuring cup and pour into mouth
of the bladder.
If using BISSELL 3X Concentrate
formulas: add one formula capful directly
into the mouth of the bladder.
4.
Fill the bladder with clean hot tap water.
*Do not boil or microwave water as it can
destroy the bladder.
www.bissell.com
ug120-4073_1623_908.indd 7
1.
3.
2.
4
800.237.7691
7
10/14/08 12:59:37 PM
Operation
Fill the 2-in-1 water tank (continued)
5. Replace the top of the tank by matching
the lid and tank edges. Handle must be in
the forward position in order to replace lid.
Rotate the handle to the carrying position to
latch the lid.
5.
Note: Remember to secure the lid and test to make
sure it is secure before picking up the tank.
6. Place tank into machine base, seating firmly
in place. Rotate tank handle back into latched
position.
6.
Carpet cleaning strokes
1. Plug the deep cleaner into a proper outlet.
Turn the power ON by pressing the red
power switch on the back of the unit with
your foot.
2. With your foot, press the gray handle release
lever located on the back of unit below
water tank.
3. While pressing the spray trigger, make one
slow forward wet pass and another back.
Let the BISSELL advanced deep cleaning
formula and DirtLifter PowerBrush do the
work for you. Caution: Do not overwet.
4. Release the spray trigger and make one
slow forward and backward pass over the
same area to remove any residual dirty
water and aid in drying.
5. Repeat cleaning passes until solution being
appears clean. Continue passes without
pressing the trigger until you can’t see any
more water being suctioned up.
8
www.bissell.com
ug120-4073_1623_908.indd 8
Tip: Thorough vacuuming
before deep cleaning will prevent
early clogging of the lint trap.
Handle Release
Power Switch
W
ARNING:
To reduce the risk of fire
and electric shock due to
internal component
damage, use only BISSELL
cleaning fluids intended for
use with the deep cleaner.
Non-BISSELL cleaning
solutions may harm the
machine and void
the warranty.
800.237.7691
10/14/08 12:59:37 PM
Operation
Empty the 2-in-1 water tank/ clean removable nozzle
1.
Turn power switch OFF. Remove the 2-in-1 water
tank from the base using the tank carry handle.
Carry the tank like a bucket to a utility sink or
outside where you will dispose of the collection
water. Remove the top of the tank by rotating the
handle forward to unlatch lid and lifting lid off tank.
2.
Empty collection water from bottom of tank.
3.
After each use, remove and rinse the lint
screen located on the tank lid.
4.
If nozzle needs to be cleaned: remove by grasping
handle at the top and pulling forward. Clean
removable nozzle by rinsing under running water.
5.
When finished, replace nozzle by slightly
raising front of machine to line up slots on the
base with the hooks on nozzle. Attach at base
first and then click nozzle into place.
1.
3.
2.
Lint Screen
4.
5.
NOTE: If nozzle is not attached properly loss
of suction will occur.
6.
To continue carpet cleaning, refer back to
pages 7 through 8, beginning with “Fill the
2-in-1 water tank” on page 7.
If cleaning is complete, refer to the “Maintenance
and care” section below.
Ready Tools™ cleaning with attachments
Your deep cleaner comes equipped with a hose
and at least one attachment for cleaning stairs,
upholstery, and more.
Important! If using the machine to clean
upholstery, check upholstery tags.
1.
Check manufacturer’s tag before cleaning.
“W” or “WS” on the tag means you can use
your PowerSteamer. If the tag is coded with
“X” or “S” (with a diagonal strike through),
or says “Dry Clean Only,” do not proceed. Do
not use on velvet or silk. If manufacturer’s
tag is missing or not coded, check with your
furniture dealer.
2.
Check for colorfastness in an inconspicuous
place.
3.
If possible, check upholstery stuffing.
Colored stuffing may bleed through fabric
when wet.
4.
Plan activities to give upholstery time to dry.
www.bissell.com
ug120-4073_1623_908.indd 9
Manufacturer’s tag
800.237.7691
9
10/14/08 12:59:39 PM
Operation
Ready Tools™
5.
Vacuum thoroughly to pick up loose debris and
pet hair. Use a vacuum with a brush attachment
and a crevice tool to clean in fabric folds and tufts.
6.
To begin cleaning with attachments, follow
the instructions on pages 7-8 for filling the
2-in-1 water tank and the formula tank.
7.
Set the ReadyTools dial to the TOOLS setting.
This will allow spray and suction from the hose.
8.
Attach the cleaning tool to the end of the hose.
9.
Clean by pressing the trigger to spray solution
onto the area to be cleaned. Slowly move the tool
back and forth over the soiled surface. Release
the trigger to suction dirty water. Continue to clean
in the area, working in small sections, until dirt is
removed.
Caution: Do Not Overwet.
Tip: To clean with sliding
crevice tool, slide brushes forward
to clean stain, slide back to suction
7.
10. When finished cleaning, remove and rinse
tool(s) in clean, running water.
11. It is recommended that you suction clean
water from the tap to rinse out the hose.
11.
12.
12. Before wrapping hose onto tool rack, lift end
of hose and stretch out to ensure all water
is cleared from hose.
13. Wrap flex hose around tool rack.
14. Empty 2-in-1 water tank and rinse out,
following instructions on page 9.
15. If the ReadyTools dial becomes difficult to
turn, the diverter assembly that holds the
dial may need to be cleaned. To clean, first
remove nozzle and locate screw that holds
the diverter assembly in place. With a Phillips
screwdriver, remove the screw and set aside.
16. Remove diverter assembly; hold under
running water making sure water flows
through and around the dial. Turn the dial about
10 times clockwise and 10 more times counter
clockwise. This should free up any debris.
Run water through here
15.
16.
Screw
17. Wipe diverter assembly with a soft cloth and
replace back on machine. Replace nozzle.
18. Return ReadyTools dial to FLOOR CLEANING
setting.
10
www.bissell.com
ug120-4073_1623_908.indd 10
800.237.7691
10/14/08 12:59:40 PM
Operation
Hard Floor Cleaning
Your deep cleaner may have come with a hard
floor tool and Hard Floor Solutions Formula. The
hard floor tool provides effective cleaning for
linoleum, vinyl, and tile floors.
Caution: Do not use on unsealed hardwood floors.
1. Thoroughly vacuum or sweep floor to pick
up any debris.
NOTE: Prior to filling with formula and
water be sure all carpet cleaning formula is
thoroughly rinsed from tank.
2.
Fill BISSELL Hard Floor Solutions Formula to
the indicated fill line in the built in measuring
cup and pour into mouth of bladder.
3.
Fill the bladder with clean hot tap water and
set aside.
4.
Attach the hard floor tool to the bottom of
the machine by hooking it into the nozzle
and swinging it down until it clicks into
place.
5.
Be sure the ReadyTools dial is set to
FLOOR CLEANING.
6.
Plug into an outlet and turn the power ON.
7.
Plan your cleaning route to leave an exit
path. Be sure to allow adequate time for
floors to dry.
8.
While pressing the spray trigger, make one
slow forward wet pass and another back.
Caution: Do Not Overwet.
9.
Repeat the motion without pressing the
trigger using the hard floor tool to squeegee
and suction up the dirty water.
4.
10. When finished, remove hard floor tool,
rinse and let dry before storing. Refer to
the Maintenance section on page 12 for
machine clean up and storage instructions.
www.bissell.com
ug120-4073_1623_908.indd 11
800.237.7691
11
10/14/08 12:59:40 PM
Maintenance and care
Machine care
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1. Turn power switch OFF. Unplug the machine
and wrap the power cord.
2.
After emptying the 2-in-1 water tank, rinse it
with running hot tap water, taking care to clean
underneath and around the heavy duty bladder.
Clean out red lint screen. Removable nozzle may
be rinsed if necessary.
3.
Replace the 2-in-1 water tank on the machine.
4.
Any loose hair or debris can be pulled from
the brush roll and thrown away.
5.
To clean attachments, remove from hose and
rinse in clean, running water. Dry before storing.
Clean the hose by suctioning clean water from
the tap. Before wrapping back on machine, lift
end of hose and stretch out to ensure all water
is cleared from hose. Refer to page 10,
illustrations 11 and 12.
6.
Wipe the machine’s exterior with a soft cloth.
7.
After carpet is dry, vacuum again to remove
hair and fuzz.
Machine storage
Put the unit away in a closet or basement for
the next use. Store cleaner in a protected, dry
area. Since this product uses water, it must not
be stored where there is a danger of freezing.
Freezing will damage internal components and
void the warranty.
12
www.bissell.com
ug120-4073_1623_908.indd 12
800.237.7691
10/14/08 12:59:40 PM
Troubleshooting
Reduced Spray OR No Spray
Possible cause
WARNING:
To reduce the risk of fire, electric
shock or injury, unplug from the
outlet before servicing.
Remedies
1. Bladder may be empty
1. Turn power switch OFF; Refill bladder
with clean hot tap water.
2. 2-in-1 tank may not be seated properly.
2. Turn power switch OFF; remove tank
and reseat tanks.
3.Pump may have lost prime.
3. Turn power switch OFF; after 1 minute
turn ON and depress spray release trigger.
4. The pump belt may be broken.
4.
A. B.
Slots Pump Belt
Turn power switch OFF and unplug from
the outlet. To check if a pump belt has broken,
you will need a flat head screwdriver.
A. Insert the blade end into the slot of the
belt access door to release. Examine the
belt for breakage. You should be able to see
the pump belt looped around the motor shaft.
If it is broken or missing, please refer to
Replacement Parts on page 14.
A replacement belt may be ordered at
www.bissell.com or by calling BISSELL
Consumer Services at 800-237-7691.
Complete installation instructions
will accompany the replacement belt.
B. When replacing belt access door be sure to
line up slots of belt access door with slots in
machine, slide door into place and snap shut.
DirtLifter PowerBrush Does Not Turn
Possible cause
Remedies
1. The brush belt or pump belt is off or broken.
1. Refer to Remedy 4 above to check if brush
belt or pump belt is broken.
Cleaner Not Picking Up Solution
Possible cause
Remedies
1. Removable nozzle may not be properly attached.
1.
2. 2-in-1 tank lid is not properly installed.
Make sure nozzle is on correctly by slightly
raising front of machine to line up slots on the
base of the machine with the hooks on nozzle.
Attach at base first and then click nozzle into place.
2. Re-install lid; refer to the image on page 8.
3. 2-in-1 tank is not properly seated.
3. 2-in-1 tank must be firmly seated to function;
remove and reseat 2-in-1 tank.
4. 2-in-1 tank has picked up maximum dirty water.
4. Empty 2-in-1 tank and refill, refer to the
Operation section.
5. The lint screen may be clogged
5. Clean out lint screen. Refer to page 9.
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store
For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691.
www.bissell.com
ug120-4073_1623_908.indd 13
800.237.7691
13
10/14/08 12:59:41 PM
BISSELL Consumer Services
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday
Saturday
8 a.m. — 10 p.m. EST
9 a.m. — 8 p.m. EST
Or write:
BISSELL HOMECARE, INC
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event
of a warranty claim. See Warranty on page 16 for details.
Please register your new BISSELL product at
www.bissell.com/productregistration
Replacement parts
Item Part No.
1
2
3
4
5
6
Part Name
203-0104
203-0102
203-0124
215-0628
015-0621
203-0105
Tank Assembly Complete
Tank Base
Removable Nozzle
Replacement Pump Belt (with instructions)
Replacement Brush Belt (with instructions)
Lint Screen
1
2
5
6
14
www.bissell.com
ug120-4073_1623_908.indd 14
3
4
800.237.7691
10/14/08 12:59:42 PM
Additional accessories
These items are available for purchase as accessories for your BISSELL PowerSteamer Select:
To purchase call 1-800-237-7691 or visit www.bissell.com.
Item
1
2
3
4
5
6
7
8
Part No.
Part Name
203-0149Hard Floor Tool
203-6651
3" Tough Stain Tool
203-6653
4" Upholstery Tool
203-6654
6" Stair Tool
203-6652
Powered TurboBrush Hand Tool
203-0116
Spraying, Sliding Crevice tool w/ Brush
203-6655
Spraying Crevice Tool
210-3040Mesh Tool Storage Bag
1
2
3
4
5
6
7
8
Cleaning Formula: Refer to bottom of page 4 of this guide for a full selection of cleaning
formula available for purchase.
For a complete list of replacement parts, cleaning formulas,
and accessories available for your BISSELL deep cleaner please
visit www.bissell.com or contact BISSELL Consumer Services at
800.237.7691.
Earn Rewards Points!
To qualify you for discounts, rebates, and other BISSELL perks.
Visit www.bissell.com/rewards to learn more.
www.bissell.com
ug120-4073_1623_908.indd 15
800.237.7691
15
10/14/08 12:59:42 PM
Warranty - BISSELL PowerSteamer
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to
state. If you need additional instruction regarding this warranty or have questions regarding what it may cover,
please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.
Limited One Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL
Homecare, Inc. will repair or replace (with new or remanufactured components or products), at BISSELL’s option,
free of charge from the date of purchase by the original purchaser, for one year any defective or
malfunctioning part.
See information below on "If your BISSELL product should require service".
This warranty applies to product used for personal, and not commercial or rental service. This warranty does not apply
to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User's Guide is not covered.
If your BISSELL product should require service:
Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area.
If you need information about repairs or replacement parts, or if you have questions about your warranty,
contact BISSELL Consumer Services.
Website or E-mail:
www.bissell.com
Use the “Customer Services” tab.
Or Call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. - 10 p.m. ET
Saturday 9 a.m. - 8 p.m. ET
Or write:
BISSELL Homecare Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE
ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE
PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER
ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION
OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE ONE YEAR DURATION
FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty lasts, so the
above limitation may not apply to you.
©2008 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 120-4073
Rev 9/08
Visit our website at: www.bissell.com
Scotchgard is a trademark of 3M
16
www.bissell.com
ug120-4073_1623_908.indd 16
800.237.7691
10/14/08 12:59:43 PM
Download PDF

advertising