Bissell 1690C Vacuum Cleaner User Manual

®
PowerSteamer
USER’S GUIDE
1692/1693/1694 PowerSteamer® Series
8805/8806 PowerSteamer® Series
3
Safety Instructions
4
Product View
5
Assembly Instructions
5-11 Operations / Special Tools
11
Maintenance
13-14 Troubleshooting
14
15
16
Consumer Services
Replacement Parts
Warranty
ug310-5907_1692-1694_205.indd 1
4/18/05 9:19:48 AM
Thanks For Buying A BISSELL PowerSteamer Deep Cleaner
We’re glad you purchased a BISSELL PowerSteamer Deep Cleaner. Everything
we know about floor care went into the design and construction of this
complete, high-tech home cleaning system.
Your PowerSteamer is well made, and we back it with a limited one-year
warranty. We also stand behind it with a knowledgeable, dedicated Consumer
Services department, so, should you ever have a problem, you’ll receive fast,
considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a
global leader in the design, manufacture, and service of high quality homecare
products like your PowerSteamer.
Mark J. Bissell
President and Chief Executive Officer
2
ug310-5907_1692-1694_205.indd 2
4/18/05 9:19:51 AM
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic
precautions should be observed, including
the following:
Read all instructions before using your
POWERSTEAMER®.
WARNING:
To reduce the risk of fire, electric shock, or injury.
■ Do not immerse
■ Use only on surfaces moistened by
cleaning process
■ Always connect to a properly grounded outlet. See
Grounding Instructions
■ Unplug from outlet when not in use and before
conducting maintenance or troubleshooting
■ Do not leave machine when it is plugged in
■ Do not service machine when it is plugged in
■ Do not use with damaged cord or plug
■ If appliance is not working as it should, has
been dropped, damaged, left outdoors or
dropped into water, have it repaired at an
authorized Service Center
■ Use indoors only
■ Do not pull or carry by cord, use cord as a
handle, close door on cord, pull cord around
sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces
■ Do not carry the appliance while in use
■ Do not unplug by pulling on cord-unplug by
grasping plug not the cord
■ Do not handle plug or appliance with wet hands
■ Do not put any object into appliance openings,
use with blocked opening, or restrict air flow
■ Do not expose hair, loose clothing, fingers or
body parts to openings or moving parts
■ Do not pick up hot or burning objects
■ Do not pick up flammable or combustible materials
(lighter fluid, gasoline, kerosene, etc.) or use in the
presence of explosive liquids or vapor
■ Do not use appliance in an enclosed space filled
with vapors given off by oil base paint, paint
thinner, some moth proofing substances,
flammable dust, or other explosive or toxic vapors
■ Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, gasoline, etc.)
■ Do not modify the 3-prong grounded plug
■ Do not allow to be used as a toy
■ Do not use for any purpose other than
described in this User’s Guide
■ Do not operate the appliance unless the belt door
is securely assembled in the location provided
■ Use only manufacturer’s recommended attachments
■ Use only cleaning products formulated by
BISSELL for use in this appliance to prevent
internal component damage. See the Cleaning
fluid Section of this manual
■ Keep openings free of dust, lint, hair, etc.
■ Keep appliance on a level surface
■ Turn off all controls before unplugging
ug310-5907_1692-1694_205.indd 3
■ Be extra careful when cleaning stairs
■ Close attention is necessary when used
by or near children
WARNING: The Power Cord on this product
contains lead, a chemical known to the State
of California to cause birth defects or other
reproductive harm.
WASH HANDS AFTER HANDLING.
SAVE THESE
INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
Commercial use of this unit voids the
manufacturer’s warranty.
GROUNDING
INSTRUCTIONS
This appliance must be connected to a grounded
wiring system. If it should malfunction or break
down, grounding provides a safe path of least
resistance for electrical current, reducing the risk
of electrical shock. The cord for this appliance
has an equipment-grounding conductor and a
grounding plug. It must only be plugged into an
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Grounded
Outlets
Grounding Pin
WARNING:
Improper
connection of the equipment-grounding
conductor can result in a risk of
electrical shock. Check with a qualified
electrician or service person if you aren’t
sure if the outlet is properly grounded.
DO NOT MODIFY THE PLUG. If it will not
fit the outlet, have a proper outlet installed
by a qualified electrician. This appliance is
designed for use on a nominal 120-volt
circuit, and has a grounding attachment
plug that looks like the plug in the drawing
above. Make certain that the appliance is
connected to an outlet having the same
configuration as the plug. No plug adapter
should be used with this appliance.
3
4/18/05 9:19:51 AM
Product View
WARNING:
To reduce the risk of fire, use
only BISSELL Advanced Deep
Cleaning Formulas in your
PowerSteamer. Use of cleaning
formulas that contain lemon
or pine oil may damage this
appliance and void warranty.
Chemical spot cleaners
or solvent-based soil removers
should not be used. These
products may react with the
plastic materials used in your
PowerSteamer causing cracking
or pitting.
Strain Reliever
Handle™
Quick Release
Cord Wrap™
Handle
Assembly
Power Cord
Lower Cord
Wrap
Lower Body
ReadyTools™
Dial
Spray
Trigger
Belt Access
Door
Floor Nozzle
Window
DirtLifter® PowerBrush*
*(select models only)
Power
Switch
Flex Hose
Measuring
Cup
Tank-in-Tank™
Easy Rolling
Wheels
Handle
Release
4
ug310-5907_1692-1694_205.indd 4
4/18/05 9:19:52 AM
How To Use This Guide
This User’s Guide is designed to help you get maximum
satisfaction from your PowerSteamer Deep Cleaner.
Enclosed you’ll find assembly instructions for cleaning
tasks, safety precautions, cleaning tips, maintenance
and troubleshooting information. Please read this guide
thoroughly before assembling and using your cleaner. Pay
particular attention to the assembly diagram, assembly
instructions, and part names. Locate and organize all parts
before assembly. Familiarize yourself with all parts and
features and how they operate. Following the Guide will
enhance your ability to get top performance from your
cleaner for many years.
If you have any questions, or comments please call
BISSELL Consumer Services at 1-800-237-7691.
How To Assemble
Your PowerSteamer assembles in two quick steps. The
only tool you will need to assemble your cleaner is a
Phillips head
screwdriver.
Your PowerSteamer is packaged as two primary
components… the Lower Body and the Handle Assembly.
To assemble:
1. Slide the Handle Assembly (with attached Quick Release Cord
Wrap™) down into the Lower Body until it will go no further.
2. Secure the handle by placing one (1) Phillips head
screw
(supplied) through the screw opening in the Lower Body
and into the rear of the Handle Assembly. Tighten with
screwdriver until secure.
Assembly is now complete.
Phillips
Head
Screw
What Comes With Your PowerSteamer
PUSH
Tough Stain Brush
16oz. Fiber Cleansing
Formula with
Scotchgard™ protector
Tough Stain
PreCleaner™
Keep plenty of BISSELL Advanced Deep Cleaning Formulas on
hand so you can clean whenever it fits your schedule. Always
use BISSELL deep cleaning formulas. Non-BISSELL cleaning
solutions may harm your cleaner and void the warranty.
5
ug310-5907_1692-1694_205.indd 5
4/18/05 9:19:52 AM
The Basics: How Your PowerSteamer Works
Power
ON
OFF
ON
OFF
The Power Switch controls power to the machine.
Power
Switch
DirtLifter® PowerBrush (on select models)
The powered brush roll at the Floor Nozzle is designed
to enhance cleaning performance. The bristle pattern
lifts out the deep down dirt while gently grooming
carpet fibers. The floating suspension self-adjusts to
all carpet heights and protects your carpet if you leave
the Power Switch ON. When the machine handle is in
the fully upright position, CarpetSaver™ automatically
raises the brush off the carpet.
Tip:
Deep cleaning carpeting
and upholstery regularly
can reduce dust and
allergens in your home.
Measuring Cup
Your PowerSteamer is equipped with a Measuring Cup
for adding the proper amount of cleaning formula to
the Tank-in-Tank™. Before using the machine, simply
fill the Measuring Cup to the fill line with BISSELL
Advanced Deep Cleaning Formula. Pour the formula
into the Tank-in-Tank as shown on page 7. For
convenience, the Measuring Cup stores on the back
of the unit.
WARNING:
To reduce the risk of
fire, electric shock
or injury unplug
from outlet before
servicing.
To Fill The Tank-in-Tank™
Tilt Handle
Back
This easy-to-use system is designed with a bladder
inside to hold clean water. As you clean, the bladder
will empty. Dirty water collects in the tank outside
the bladder.
NOTE: Make sure to add formula to the tank before
filling it with water.
Depress
the Handle Release pedal to tilt back
1.
the handle.
2. Lift the Tank-in-Tank handle. The handle locks the lid in
1
Handle
Release
Lift and
Carry
2
Rotate Handle
to Unlatch
place. Carry the Tank-in-Tank like a bucket to fill at the sink.
3. Set the Tank down and rotate the handle forward to
3
unlatch the Lid. Lift off and set the Lid aside.
6
ug310-5907_1692-1694_205.indd 6
4/18/05 9:19:55 AM
To Fill The Tank-in-Tank (Continued)
4
4. Using the Measuring Cup, pour BISSELL Deep Cleaning
Formula into the mouth of the bladder.
5. Fill to the bottom of the neck with hot tap water. Do not
boil or microwave water.
NOTE: Fill slowly to reduce sudsing.
5
6. Replace the Tank Lid, matching the Lid and Tank edges.
Rotate the handle to carrying position. Replace Tank
in machine base, seating firmly in place. Rotate
6
handle back down to latched position.
When It's Time To Empty The Tank-in-Tank
1
NOTE: Remove the Tank-in-Tank, following
steps 1 through 3 on page 6 .
Pour
out dirty water.
1.
2. After each use, remove and rinse the Lint Screen located
on the Tank Lid.
A. Remove Tank Lid, follow step 3 on page 6.
B. Remove Lint Screen. Rinse under faucet to
Lint Screen
2B
2C
Lint Screen
remove any debris.
C. Insert Lint Screen back in Tank Lid. The
screen will click into place.
D. Replace Tank Lid.
3. Refill with cleaning solution and clean tap water, follow
steps 4-5 above.
5
NOTE: When a cleaning job is complete, rinse out the
Tank-in-Tank by running clean water between the
bladder and the tank.
Latched
4. Return the Tank-in-Tank to the machine, follow
step 6 above.
5. Refer to the Maintenance/Storage section on the
next page for final cleanup.
Tip:
A special red float device in the tank
will cause the cleaner to stop removing solution from the carpet. The motor
sound will rise in pitch to let you know
the dirty water tank is full.
7
ug310-5907_1692-1694_205.indd 7
4/18/05 9:19:56 AM
ReadyTools™ Dial
This provides floor or upholstery cleaning with the turn of
a dial. For carpet/floor cleaning make sure the dial is set to
FLOOR CLEANING. For upholstery or fabric cleaning, select
your cleaning tool, attach it to the Flex Hose, switch to Tools
Settings and the PowerSteamer is ready to clean upholstery,
fabrics and more*
R NG
NI
FLOO
CLEA
S
TOOL
REAT
PRET
* Set the switch to FLOOR CLEANING when cleaning carpets, or set
it to TOOLS/PRETREAT when using the Flex Hose attachments.
How To Clean Carpet
1. Plan activities to give carpet time to dry.
2. Remove easily moved furniture from the room (chairs, lamps,
coffee tables, etc).
up loose debris and pet hair before
3. Vacuum thoroughly to pick
using the PowerSteamer.
4. Plan your cleaning route to leave an exit path. It is best to
begin cleaning in the corner farthest from your exit.
NOTE: You may notice hair and debris deposits on carpet
that were loosened by brushing action (especially with
newer carpets that have never been deep cleaned before).
This debris should be picked up by hand and thrown away.
Debris that deposits in the brush belt area should be cleaned
out to keep Belts running free.
EXIT
12
5
9
10
11
6
7
1
T
STARRE
HE
2
3
3'
4'
4
Pretreating
Improves cleaning effectiveness for heavily soiled carpet in
high traffic areas such as entryways and hallways:
™
1. Set the ReadyTools dial to TOOLS/PRETREAT.
2. Plug the PowerSteamer into a proper outlet and turn ON the
Power switch.
3. While pressing the trigger, slowly make several passes over the
area to be cleaned. Caution: Do not overwet.
Turn the machine Power switch OFF and let BISSELL Advanced
4. Deep Cleaning Formula dissolve the tough soil for 1-2 minutes.
Reset the ReadyTools Dial to FLOOR CLEANING before continuing.
Normal Cleaning
1. Plug the PowerSteamer into a proper outlet and turn ON the
Power switch.
2. While pressing the Spray Release Trigger, make one slow
forward and back wet pass. Let the BISSELL Advanced Deep
Cleaning Formula and DirtLifter PowerBrush* do the work for
you. Caution: Do not overwet.
3. Release the trigger and make one slow forward and back pass
over the same area to remove any residual dirty water.
4. Repeat cleaning passes without pressing the trigger until you can't see
any more water being suctioned up.
5. When cleaning job is complete, refer to the Maintenance/
8
Tip:
Thorough
vacuuming before
deep cleaning
will prevent early
clogging of the
lint trap.
Storage section on page 11.
ug310-5907_1692-1694_205.indd 8
4/18/05 9:19:56 AM
Cleaning Fluid Section
Keep plenty of genuine BISSELL Fiber Cleansing Formula™
on hand so you can clean and protect whenever it fits your
schedule. Always use genuine BISSELL deep cleaning formulas.
WARNING:
To Reduce the Risk of Fire and Electric Shock
due to internal componet damage, use only
BISSELL cleaning fluids intended for use
with the deep cleaner.
48 oz. BISSELL
Fiber Cleansing
Formula™ with
Scotchgard™
Protector
item # 0710
48 oz. BISSELL
Multi-Allergen
Removal™
Formula with
Scotchgard™
Protector
48 oz. BISSELL
Pet Odor and
Soil Removal™
Formula with
Scotchgard™
Protector
item # 0720
item # 0730
48 oz. BISSELL
Natural Orange
Extract Formula
with Scotchgard™
Protector
item # 0740
Cleaning Bare Floors
The Bare Floor Tool (available with select models only)
provides effective cleaning for linoleum, vinyl, and tile
floors. Caution: Do not use on hardwood floors.
Tilt
Handle
Back
1. Use only BISSELL Hard Floor Solutions™.
2. Vacuum or sweep thoroughly to pick up loose debris and pet hair.
Handle Release
3. Remove easily moved furniture from the room, (chairs, tables, etc).
4. Plan your cleaning route to leave an exit path.
5. Plan activities to allow about 30 minutes for the floor to
dry completely.
Carrying
Attach The Bare Floor Tool
1. Step on the handle release to lay the machine handle down.
™
2. Remove the Tank-in-Tank from the machine base.
3. Lift the machine base to expose the underside of the nozzle.
Floor Tool to nozzle with long tab to the right side
4. Attach Bare ™
(ReadyTools side) of the nozzle.
5. First attach left side (short tab) catching tab over nozzle edge.
Bare Floor
Cleaning Tool
Snap Together
6. Gently bend long tab (right side) outward to easily snap over
edge of clear nozzle on right.
9
ug310-5907_1692-1694_205.indd 9
4/18/05 9:19:57 AM
Machine Preparation
1. Set up machine following the instructions in The Basics on pages
6-9. Be sure to thoroughly rinse out any remaining Fiber Cleansing
Formula from the Tank-in-Tank bottle to prevent slippery linoleum,
vinyl, and tile floors. Use BISSELL Hard Floor Solutions in the
Tank-in Tank.
2. Check ReadyTools dial - it should be set on Floor Cleaning.
3. Plug into a proper outlet and turn Power Switch ON.
Bare Floor Cleaning Technique
1. Slowly move the machine nozzle with Bare Floor Tool
forward and back over soiled surface one time while
pressing the trigger. Caution: Do not over wet.
2. Repeat the motion without pressing the trigger using the
Bare Floor Tool to squeegee and suction up the dirty water.
3. Repeat steps 1 and 2 backing along the exit path.
4. Allow about 30 minutes for the floor to dry completely.
WARNING:
To reduce the risk
of fire, electric
shock or injury
unplug from outlet
before servicing.
5. When the cleaning job is complete refer to the Maintenance/
Storage section on page 11.
6. To remove Bare Floor Tool gently bend long tab (right
side) outward and pull tool down away from nozzle.
Rinse thoroughly, dry and store.
How To Clean Upholstery and Small Areas
Important - Check Upholstery Tags
Check manufacturer’s tag before cleaning. “W” or “WS” on the tag
means you can use your PowerSteamer If the tag is coded with “X”
or “S” (with a diagonal strike through), or says “Dry Clean Only,” do
not proceed. Do not use on velvet or silk. If manufacturer’s tag is
missing or not coded, check with your furniture dealer.
h
bv
g kvh
gh bj j gh
dd kll
df kn hn hl
j f
Ads j j jh
bb
cv ghhj
gc
Check for colorfastness in an inconspicuous place.
If possible, check upholstery stuffing. Colored stuffing may
bleed through fabric when wet.
Plan activities to give upholstery time to dry.
Manufacturer’s Tag
Vacuum thoroughly to pick up loose debris and pet hair. Use a
vacuum with a brush attachment and a crevice tool to clean in
fabric folds and tufts.
Machine Preparation
1. Set up the machine following instructions in The Basics sec-
tion, on pages 6-9.
2. Using the Measuring Cup provided, pour BISSELL Advanced
Deep Cleaning Formula into the Tank-in-Tank.
10
™
3. Set the ReadyTools dial to Tools or PreTreat.
ug310-5907_1692-1694_205.indd 10
4/18/05 9:20:04 AM
Maintenance/Storage
Power Cord
Quick Release
1. Turn Power switch OFF.
2. Unplug power cord from the outlet and coil around
Power Cord Quick Release.
3. Remove and rinse tools in clean, running water, let
dry and replace in tool caddy.
Flex Hose
Storage Bracket
4. Coil flex hose through storage brackets.
™
5. Remove Tank-in-Tank, dispose of dirty water. See
The Basics section, on page 6.
™
6. Rinse out the Tank-in-Tank and reseat the tank unto the
machine.
7. Wipe all exterior surfaces with a soft cloth.
8. Store cleaner upright in a protected, dry area.
CAUTION:
PowerSteamer
9. When carpet is dry, vacuum again to remove hair and fuzz that
the POWERSTEAMER may have loosened.
uses water and
must not be stored
where there is a
danger of freezing.
Freezing will
damage internal
components and
void the warranty.
Pump Belt and Brush Belt Replacement
1. Turn the machine off and unplug from wall outlet.
2. Step on the release pedal and recline the handle down onto
floor.
3. Remove the Tank-in-Tank. Set them aside.
4. Remove Belt Access Door located near the ReadyTools Dial. Insert a
flat head screwdriver into the slot nearest to the handle and gently
2
prying the access door off.
3
5. Turn the machine onto its side so the belt access area is
facing upward.
6. On the bottom of the machine, near the belt access area, is a
Red Retainer Plate that holds the black brush arm and brush
in place. Using a Phillips head screwdriver remove the screw
that holds the Red Retainer Plate in place. Set Red Retainer
Plate and Phillips head screw aside.
NOTE: For 1693 Model series, remove stationary brush
(skip step 6 and 7)
7. Remove the black brush arm that holds the brush in place.
4
5
6
7
8
9
Set the black brush arm aside.
8. Remove the “toothed” Brush Belt from the Brush then from the
Red Pump Pulley. Set the “toothed” Brush Belt and Brush aside.
9. Locate and remove the broken Pump Belt.
WARNING:
To reduce the risk
of fire, electric
shock or injury
unplug from outlet
before servicing.
ug310-5907_1692-1694_205.indd 11
11
4/18/05 9:20:04 AM
To Install The Replacement Pump Belt
1. With the unit still on its side, loop one end of the
1.
replacement Pump Belt around the Red Pump Pulley
and then the other end around the silver motor shaft. Do not
twist the replacement pump belt.
2. Re-install the "toothed" Brush Belt first onto the Red Pump
Pulley and then onto the toothed end of the Brush.
3. Re-install the brush into the base of the unit.
2.
3.
the silver motor shaft. If assembled correctly, the replacement 4.
Pump Belt should rotate freely around the silver motor shaft
and drive pulley without obstruction. The brush should also
rotate freely when the silver motor shaft is turned.
5.
4. Place the black brush arm onto the Brush and slide black
brush arm into original position.
5. Re-install the Red Retainer Plate and Phillips head screw.
6. Using your finger, gently spin the replacement pump belt on
7. Turn the machine right side up and replace the Tank-in-Tank
and belt access door.
8. Assembly is now complete.
6.
7.
If you have any questions, or are having trouble installing
your replacement pump belt, please call BISSELL Consumer
Services at 1-800-237-7691.
12
ug310-5907_1692-1694_205.indd 12
4/18/05 9:20:05 AM
Troubleshooting
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug appliance from outlet
before servicing.
Reduced Spray Or No Spray.
Possible Causes
Remedies
1
Bladder may be empty.
1
2
2
3
The Lint Screen may be clogged.
Tank-in-Tank may not be seated properly.
4
Pump may have lost prime.
4
5
The Pump Belt may be broken.
5
3
Lift Here
Insert Screwdriver Blade Here
Turn power OFF; refill tank with
hot tap water.
Clean out Lint screen page 7.
Turn power OFF; remove tank and
reseat tank.
Turn power OFF; after 1 minute, turn
ON and depress Spray trigger.
Turn power OFF and unplug
from the outlet. To check if a Pump
Belt has broken, you will need a flat
head
screwdriver. Insert the blade
end into the lower slot of the Belt
Access door to release the lower
snap. If necessary, insert the blade
end into the upper slot to release the
upper snap. Examine the belt for
breakage. You should be able to see
the Pump Belt looped around the
motor shaft. If it is broken or missing,
please refer to the part numbers and
descriptions on page 15 before
calling Consumer Services. Complete
installation instructions will
accompany the replacement belt.
DirtLifter PowerBrush Does Not Turn.
Possible Causes
1
The Brush Belt or Pump Belt may be broken.
Remedies
1
Turn power OFF and unplug
from the outlet. To check if a Brush
Belt has broken, you will need a flat
head
screwdriver. Insert the blade
end into the lower slot of the Belt
Access door to release the lower
snap. If necessary, insert the blade
end into the upper slot to release the
upper snap. Examine the belt for
breakage. If broken, refer to
pages 11-12.
13
ug310-5907_1692-1694_205.indd 13
4/18/05 9:20:06 AM
Troubleshooting (Continued)
PowerSteamer is not picking up solution and water.
Possible Causes
Remedies
1
2
ReadyTools Dial may be at the
wrong setting for cleaning job.
Nozzle Window may not be properly attached.
3
Tank-in-Tank Lid is not properly installed.
3
4
Tank-in-Tank is not properly seated.
4
5
Poor tool position.
(Handheld attachments only)
Tank-in-Tank has picked up the maximum
dirty water.
5
1
6
2
6
Set ReadyTools Dial to either FLOOR
CLEANING or TOOLS/PRETREAT.
Make sure the two tabs on the back
of the Floor Nozzle Window are
inserted through the mating slots in
the main housing. Reinstall
if necessary.
Reinstall lid; refer to The Basics
section, page 6.
Tank-in-Tank must be firmly seated to
function. Remove and reseat Tank-in- Tank.
Readjust angle; apply more
downward pressure.
Empty tank and refill; refer to
The Basics section, page 6.
Thank you for selecting a BISSELL product.
If you should happen to need assistance during assembly or operations, call 1-800-237-7691.
Please do not return this product to the store
BISSELL Consumer Services
For information about repairs or replacement parts, or questions about
your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday
Saturday
8 a.m. — 10 p.m. ET
9 a.m. — 8 p.m. ET
Or write:
BISSELL HOMECARE, INC
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
14
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the
event of a warranty claim. See "About Your Warranty" on page 16 for details.
ug310-5907_1692-1694_205.indd 14
4/18/05 9:20:06 AM
Replacement Parts
*Not all parts included with every model
Item Part No.
Part Name
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Handle Assembly with Screw
Tough Stain Brush
Tank Assembly Complete
Tank Lid Assembly
Tank Bottom
Baffle with Red Float
Window Gasket
Replacement Pump Belt (with instructions)
Replacement Brush Belt (with instructions)
Lint Screen
Measuring Cup
Bare Floor Tool
48 oz. BISSELL Fiber Cleansing Formula with Scotchgard™ Protector
22 oz. BISSELL Tough Stain PreCleaner
32 oz. BISSELL Hard Floor Solutions™
214-4025
215-9155
015-9043
015-4439
015-9041
213-0213
210-4052
215-0628
015-0621
015-3500
213-3010
214-9131
0710
0400
0484
2
3
4
5
6
7
8
9
10
11
12
13
14
15
PUSH
1
15
ug310-5907_1692-1694_205.indd 15
4/18/05 9:20:07 AM
About Your Warranty
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to
state. If you need additional instruction regarding this warranty or have questions regarding what it may cover,
please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.
Limited One Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare,
Inc. will repair or replace (with new or remanufactured components or products), at BISSELL’s option, free of
charge from the date of purchase by the original purchaser, for one year any defective or malfunctioning part.
See information below on "If your BISSELL product should require service".
This warranty applies to product used for personal, and not commercial or rental service. This warranty
does not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or
malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with
the User's Guide is not covered.
If your BISSELL product should require service:
Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area.
If you need information about repairs or replacement parts, or if you have questions about your
warranty, contact BISSELL Consumer Services.
Website or E-mail:
www.bissell.com
Use the “Customer Services” tab.
Or Call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 am. - 10 pm. ET
Saturday 9 am. - 8 pm. ET
Or write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids, MI 49501
ATTN: Consumer Services
BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE
ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE
OF THE PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER
ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION
OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE ONE YEAR DURATION
FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty lasts,
so the above limitation may not apply to you.
NOTE: Please keep your original sales receipt. It provides proof of
date of purchase in the event of a warranty claim.
16
ug310-5907_1692-1694_205.indd 16
©2005 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved.
Part Number 310-5907
Rev 3/05
Visit our website at:
www.bissell.com
Scotchgard is a trademark of 3M.
4/18/05 9:20:10 AM