User`s guide | Bissell 7950 Carpet Cleaner User Manual

ProHeat ™
SELF PROPELLED
USER’S GUIDE
7950 SERIES
3
Safety Instructions
4
5
6-17
17-19
20-21
22
23
24
Product View/Accessories
Assembly
Features / Operations
Routine Maintenance
Troubleshooting
Consumer Services
Replacement Parts
Warranty
Thanks for buying a BISSELL ProHeat ™ Self Propelled
We’re glad you purchased a BISSELL ProHeat™ Self Propelled heated
formula deep cleaner. Everything we know about floor care went into the
design and construction of this complete, high-tech home cleaning system.
Your ProHeat Self Propelled is well made, and we back it with a limited 2year warranty. We also stand behind it with a knowledgeable, dedicated
Consumer Services department, so, should you ever have a problem, you’ll
receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is
a global leader in the design, manufacture, and service of high quality
homecare products like your ProHeat Self Propelled deep cleaner.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
2
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic
precautions should be observed, including
the following:
Read all instructions before using your
ProHeat™
WARNING: To reduce the risk of
fire, electric shock, or injury:
■ Do not immerse.
■ Use only on surfaces moistened by
cleaning process.
■ Always connect to a properly grounded outlet.
■ See Grounding Instructions.
■ Unplug from outlet when not in use and before
conducting maintenance or troubleshooting.
■ Do not leave machine when it is plugged in.
■ Do not service machine when it is plugged in.
■ Do not use with damaged cord or plug.
■ If appliance is not working as it should, has
been dropped, damaged, left outdoors, or
dropped into water, have it repaired at an
authorized Service Centre.
■ Use indoors only.
■ Do not pull or carry by cord, use cord as a
handle, close door on cord, pull cord around
sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces.
■ Do not carry the appliance while in use.
■ Do not unplug by pulling on cord. Unplug by
grasping the plug, not the cord.
■ Do not handle plug or appliance with wet
hands.
■ Do not put any object into appliance openings,
use with blocked opening, or restrict air flow.
■ Do not expose hair, loose clothing, fingers or
body parts to openings or moving parts.
■ Do not pick up hot or burning objects.
■ Do not pick up flammable or combustible
materials (lighter fluid, gasoline, kerosene, etc.)
or use in the presence of explosive liquids or
vapour.
■ Do not use appliance in an enclosed space
filled with vapours given off by oil base paint,
paint thinner, some moth proofing substances,
flammable dust, or other explosive or toxic
vapours.
■ Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, gasoline, etc.).
■ Do not modify the 3-prong grounded plug.
■ Do not allow to be used as a toy.
■ Do not use for any purpose other than
described in this User’s Guide.
■
■
■
■
■
■
■
■
■
■
Do not operate the appliance unless the belt
door is securely assembled in the location
provided.
Use only manufacturer’s recommended
attachments.
Use only cleaning products formulated by
BISSELL for use in this appliance.
Keep openings free of dust, lint, hair, etc.
Do not point attachment nozzle at people
or animals
Keep appliance on a level surface.
Turn off all controls before unplugging.
Unplug before attaching the TurboBrush.™
Be extra careful when cleaning stairs.
Close attention is necessary when used by or
near children.
SAVE THESE INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
Commercial use of this unit voids the
manufacturer’s warranty.
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded
wiring system. If it should malfunction or break
down, grounding provides a safe path of least
resistance for electrical current, reducing the risk
of electrical shock. The cord for this appliance
has an equipment-grounding conductor and a
grounding plug. It must only be plugged into an
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Grounded
Outlets
Grounding Pin
WARNING: Improper connection
of the equipment-grounding conductor can
result in a risk of electrical shock. Check
with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG.
If it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
This appliance is designed for use on a
nominal 120-volt circuit, and has a
grounding attachment plug that looks like
the plug in the drawing above. Make certain that the appliance is connected to an
outlet having the same configuration as the
plug. No plug adapter should be used with
this appliance.
3
Keep plenty of genuine BISSELL Deep Cleaning
Formula™ and Scotchgard™ protector cartridges
on hand so you can clean and protect whenever
it fits your schedule. Always use genuine
BISSELL deep cleaning formulas. Non-BISSELL
cleaning solutions may harm the machine and
void the warranty.
Trigger
Power
Switch
SmartTemp™
Switch
Upper
Handle
Tool Caddy
Power Cord
Quick Release
Scotchgard
Applicator
Tool Storage
Crevice Tool
Storage
(If included)
Tank-inTank™
Upper
Handle
Screws
Screws
Tough Stain
Brush Storage
TurboBrush™
Powerdrive
Knob
Carry
Handle
Flex Hose
Lower Handle
Handle
Release
SmartTemp
Ready Light
™
Flow Indicator
(Filter Inside)
SmartMix™
Dial
ReadyTools™ 4” Upholstery Tool
Tough Stain Brush
(Available on select
Dial
™
Spraying Crevice Tool
(Available on select models only.)
Belt Access Door
TRIAL
Floor Nozzle Window
SIZE
TRIAL
TurboBrush™
(Available on select
models only.)
NS
T
R
REM
R
Tool Bag
DI
DI
AND STA
OV
I
Safely Deep Cleans and
Revitalizes No-Wax Floors
AND STA
Penetrates and Loosens Tough Stains
& Embedded Dirt before Deep Cleaning
I
32 FL.OZ.
(946 mL)
TOUGH STAIN
PRECLEANER ™
ES DEEP
WN
Safely Deep Cleans and
Revitalizes No-Wax Floors
BE IRRITATING TO THE EYES.
CAUTION: MAY
READ BACK PANEL CAREFULLY
Scotchgard™
protector
cartridge
™
ES DEEP
WN
T
Floor Cleansing Formula
FOR DEEP
CLEANING MACHINES
DO
OV
DO
H
US
BR
SIZE
®
®
Floor Cleansing Formula
FOR DEEP
CLEANING MACHINES
™
4
(Available on select
models only.)
(Available on select models only.)
ON
CTI
SU
Applicator
Tool
PreTreat Wand
Bare Floor Attachment
REM
DirtLifter™
PowerBrush
models only.)
NS
SmartMix
Tank
Accessories
*All items may not be included with your model.
More tools are available. To order replacement parts
or tools please refer to page 23.
BE IRRITATING TO THE EYES.
CAUTION: MAY
READ BACK PANEL CAREFULLY
32 FL.OZ.
(946 mL)
Floor
BISSELL
Fiber Cleansing Cleansing
Formula™ with Formula™
Scotchgard™
Protection
Tough Stain
PreCleaner™
How to Use This Guide
WARNING:
Do Not plug in your cleaner
This User’s Guide has been designed to help you get the utmost
satisfaction from your BISSELL ProHeat deep cleaner. You’ll find
assembly and operating instructions, safety precautions, as well as
maintenance and troubleshooting instructions. Please read this Guide
thoroughly before assembling your deep cleaner.
Pay particular attention to the product diagram, assembly
instructions, and part names. Locate and organize all parts before
assembly. Familiarize yourself with the parts and where they
go. Following this User’s Guide will greatly enhance your ability
to get the most performance from your BISSELL ProHeat for
many years.
until you have completely
assembled it per the following
instructions and are familiar
with all instructions and
operating procedures.
1
Your ProHeat comes in 3, easy to assemble
components plus accessories.
Upper Handle
Lower Handle
Tool Caddy
The only tool you will need to assemble your cleaner is a Phillips
head
screwdriver.
Powerdrive Knob
How to Put It Together
1
Refer to Assembly Diagram on page 4
1.
Make sure the Powerdrive Knob is in the “ON” position.
Slide Upper Handle onto Lower Handle.
2.
Insert 2 screws into lower holes while gently pushing
down on Upper Handle. See drawing for exact location.
Tighten screws completely.
3.
Position Tool Caddy on back of unit. Insert 4 screws until
snug.
4.
Snap tools into storage on the Tool Caddy as shown in
figure 4.
2
ProHeat assembly is now complete.
Tighten
Completely
3
4
5
Special Features of your BISSELL ProHeat
Self Propelled Powerdrive
The ProHeat Self Propelled home cleaning system is the first and only
deep cleaner with a powerdrive. The Self Propelled feature allows
you to clean forward and backward using a minimum amount of
effort while maximizing cleaning.
Simply turn the Powerdrive Knob to the “ON” position.
1.
2.
Push the handle slightly forward to engage the
powerdrive in the forward motion and pull slightly back for
ease of motion on the backward pass.
3.
The Powerdrive Knob may be turned to the “OFF” position
for transporting the machine, or for maneuvering around
delicate furniture.
The BISSELL SmartClean™ System
The ProHeat is a home cleaning system that heats hot tap water and
automatically mixes it with BISSELL deep cleaning formula. The solution is heated as it is applied to the carpet. The combination of heated cleaning solution, powered brushes and suction provide a safe
and thorough method of cleaning.
SmartTemp™
Temperature control automatically heats the cleaning solution
as it is being applied to the carpet (*) to safely optimize
cleaning effectiveness.
1.
2.
3.
6
4.
The Power Switch on the handle controls power to the
machine; both switches must be ON ( I ) for SmartTemp
to work.
The SmartTemp Switch is found on the handle, near the
Power Switch. You may choose not to use the SmartTemp
feature if you are cleaning delicate wool or oriental rugs.
*SmartTemp heats the cleaning solution for carpet
and bare floor application only. It does not heat
solution sprayed through the accessory tools.
The SmartTemp Ready Light indicates when the heater is
ON ( I ). The heater should be turned on 2 minutes before
cleaning, to become fully warmed up and ready for
cleaning. It is found on the front of the handle where it is
easy to see while you clean.
SmartTemp increases the water temperature approximately
25° and will not allow it to exceed 180.°
SmartTemp Ready Light
SmartMix™
SmartMix
Tank
Provides custom solution control for each cleaning job.
Lift the SmartMix concentrate tank up and out of the
machine base.
1.
2.
3.
4.
5.
Turn the tank over so that the valve cap is in an upward
position. Unscrew the valve cap and fill the tank to the fill
line with BISSELL deep cleaning formula.
Replace the valve cap turning until snug.
Replace SmartMix concentrate Tank.
Choose the SmartMix setting that fits the cleaning job.
Water Rinse / Carpet Protector -This setting
must also be used when applying the carpet
protectant through the applicator, to prevent the
pump from temporarily losing its prime.
D
SmartMix
Dial
High Traffic- automatically mixes the right amount
of water and concentrate to dissolve tough grime
and heavy soil. Note: Residual cleaning materials left
in carpet from other products may cause excessive
foaming when picked up. If foam is overflowing
tank, move SmartMix Dial to “Water Only” position
until the condition stops.
Note: Both the SmartMix Tank and the clean
water tank must have liquid in them for
the machine to spray. If one tank is empty,
the machine will temporarily lose its
prime and not apply either cleaning
solution or water only.
DirtLifter™ PowerBrush
The powered brush roll at the floor nozzle is designed to
enhance cleaning performance. The bristle pattern lifts out the
deep down dirt while gently grooming carpet fibers. The floating
suspension self-adjusts to all carpet heights and protects
your carpet if you leave the power switch ON ( I ). When the
machine handle is in the fully upright position, Carpet Saver™
automatically raises the brush off the carpet.
H
T R IG
AF H
N
W O R FI
C A M C
P R A R TE A L
O PE R R
TE T I
N
C
TO S E
/
R
Normal- automatically provides the best mix of
water and concentrate for most cleaning jobs.
Tip:
Deep Cleaning
stairs and high
traffic areas on a
regular basis and
using the
Scotchgard
protector can
prolong carpet
life.
WARNING:
To reduce the risk of fire,
use only BISSELL Deep
Cleaning Formula for full
size machines in your
ProHeat. Use of cleaning
formulas which contain
lemon or pine oil may
damage this appliance
and void warranty.
Chemical spot cleaners or
solvent based soil
removers should not be
used. These products may
react with the plastic
materials used in your
ProHeat, causing cracking
or pitting.
7
Tank-in-Tank™
Our Tank-in-Tank system is designed with a bladder inside for
clean water. As you clean, the bladder will empty. Dirty water collects in the tank outside the bladder.
Step on Handle Release to lay the machine handle
down out of the way.
1.
2.
3.
4.
5.
Lift the Tank-in-Tank handle. The handle locks the
lid in place.
Carry it like a bucket to fill at the sink.
Note: You may notice hair and debris deposits on
the carpet that were loosened by the
brushing action (especially with newer
carpets that have never been deep cleaned
before). This debris should be picked up
and thrown away. Debris that deposits in
the Brush Belt should be cleaned between
uses to keep the Belts running free.
Find the mouth of the Bladder and fill to the bottom of
the neck with clean hot tap water. *Do not boil or
microwave water as it can destroy the Bladder.
Note: Fill the Bladder with clean hot tap water only.
Replace the Tank Lid matching the lid and tank edges.
Handle must be in the forward position to reinstall.
7.
Rotate the handle to the carrying position to re-latch
the lid.
9.
Lift and Carry
3
Set the tank down and rotate the handle forward to
unlatch the lid. Lift off and set the lid aside.
6.
8.
Handle
Release
4
Rotate Handle to
Unlatch
5
Replace tank in machine base, seating firmly in place.
Fill bladder only with
clean hot tap water
Rotate handle back down to the latched position.
Note: Both the SmartMix Bottle and the clean
water tank must have liquid in them for
the machine to spray. If one tank is empty
the machine will not apply either cleaning
solution or water only.
9
When It’s Time to Empty Tank-in-Tank™
1.
8
Remove the Tank-in-Tank – follow steps 1 and 2 above.
2.
Carry the Tank-in-Tank, like a bucket, to the sink where
you will dispose of the dirty water.
3.
Remove Tank Lid by rotating handle forward to unlatch
lid and lifting lid off tank.
4.
Latched
Pour out dirty water.
3 Rotate Handle to
Unlatch
Pour out
4 dirty water
When It’s Time to Empty Tank-in-Tank™ (continued)
5.
After each use, remove and rinse the lint screen located
on the Tank Lid.
A. Remove tank assembly from unit.
B. Remove Tank Lid.
C. Remove any debris caught in lint screen.
D. Reinsert lint screen on Tank Lid. The screen will
click into place
E. Replace Tank Lid.
F. Reinsert tank assembly into unit.
6.
Refill with clean tap water as above, steps 5 through 9
on page 8, and refill the SmartMix Tank with BISSELL
deep cleaning formula as necessary.
7.
When the cleaning job is complete, rinse out the
Tank-in-Tank by rinsing clean water between the bladder
and tank.
8.
Return Tank-in-Tank to the machine, following steps 6
through 9 on page 8.
3
6
9.
Refer to the Maintenance section, pg. 17 for the
final cleanup.
5D
5C Lint Screen
Fill bladder
only with clean
hot tap water
8
Latched
The Flow Indicator
The Flow Indicator is located on the machine base. It spins when
the trigger is pressed to indicate that the machine is applying
cleaning solution to the floor. It will stop spinning to indicate that the
SmartMix Tank or bladder needs to be refilled, or when the trigger is
released. Flow Indicator does not spin when the Ready Tools Dial is
set to Tool setting.
ReadyTools Dial
This provides above floor cleaning with the flip of a switch.
Just choose the cleaning tool or protector applicator, attach
to the flex hose and ProHeat is ready to clean upholstery or,
stairs or apply extra protection against dirt and tough stains
when using the Scotchgard protector applicator.*
*Set the dial to Floor Cleaning when cleaning
carpets or bare floors or set it to Tools/PreTreat
when using the flex hose attachments or for
pre-treating floors, or when applying the
Scotchgard protector applicator.
Tip:
A special red
float device
in the tank will
cause the cleaner
to stop removing
solution from the
carpet and the
motor sound will
rise in pitch to let
you know the
dirty water tank is
full.
Tip:
Thorough
vacuuming
before deep
cleaning will
prevent early
clogging of
lint trap.
Flow Indicator
*SmartTemp heats the cleaning solution for carpet
and bare floor application only. It does not heat
solution sprayed through the accessory tools.
R
NIN
FLOO
CLEA
G
S
TOOL
REAT
PRET
ReadyTools Dial
9
Operation
Before You Clean Carpets
1.
2.
Plan activities to give carpet time to dry.
Remove easily moved furniture from the room (chairs,
lamps, coffee tables, etc).
9
EXIT
3.
Vacuum thoroughly to pick up loose debris and pet hair
before using the ProHeat.
12
10
11
3'
7
6
5
2
1 RT
STAERE
H
4'
3
4.
Plan your cleaning route to leave an exit path. It is best
to begin cleaning in the corner farthest from your exit.
4
Machine Preparation
1.
Set up the machine following instructions in
The Features section, pages 6-9.
2.
Use BISSELL deep cleaning formula in the SmartMix
Tank when cleaning carpets, stairs or upholstery. Use
clean water in the SmartMix Tank for gentle cleaning,
rinsing, or when applying carpet protectant.
3.
Choose the SmartMix setting to match the
cleaning job.
4.
Set the ReadyTools Dial to either Tools/PreTreat or
Floor Cleaning.
PreTreating
Pretreating is recommended to improve cleaning
effectiveness for heavily soiled carpet, high traffic
areas such as entryways and hallways, or stairs.
1.
2.
Tip:
Set the SmartMix Dial to High Traffic.
Set ReadyTools Dial to PreTreat.
3.
Plug into a proper outlet and turn ON ( I ) both the
Power and SmartTemp Switches.
4.
While pressing the Trigger, slowly make several passes
over the area to be cleaned. Caution: Do not overwet.
5.
Turn the machine Power switches OFF ( O ) and let
BISSELL Deep Cleaning Formula dissolve the tough
soil for 1-2 minutes before continuing.
TOUGH STAIN
PRECLEANER ™
10
Penetrates and Loosens Tough Stains
& Embedded Dirt before Deep Cleaning
Try pretreating
stairs or entry
ways with
BISSELL Tough
Stain PreCleaner™.
Then deep
clean with the
SmartMix™
Dial set on
High Traffic.
Carpet Cleaning
1.
2.
Plug into a proper outlet and turn the Power and the
SmartTemp Switches ON ( I ). Wait 2 minutes for the
heater to warm up to maximize cleaning.
3.
Release the Trigger and make one slow forward and back
pass over the same area to remove any residual dirty water.
4.
Repeat cleaning passes until solution being pulled up
appears clean. For the most thorough clean, use slow
forward and backward passes.
5.
6.
ATTENTION
BERBER CARPET
OWNERS:
Some Berber Carpets have a
While pressing the Trigger, make one slow forward wet
pass and another one back. Let the SmartTemp heated
formula and DirtLifter PowerBrush do the work for you.
Caution: Do not overwet.
Note: Take care not to run over loose objects or
edges of area rugs. Stalling brush may
result in premature belt failure.
tendency to fuzz with wear.
Repeated strokes in the
same area with an ordinary
vacuum or deep cleaner may
aggravate this condition.
Please see Stain Removal
instructions on page 12.
Continue passes without pressing the trigger until you
can’t see any more water being pulled up.
Note: Both the SmartMix Tank and the clean
water tank must have liquid in them for
the machine to spray. If one tank is empty
the machine will not apply either cleaning
solution or water only.
When the cleaning job is complete refer to the
Maintenance section for machine cleanup and storage
instructions on pages 17-19.
Cleaning Formula
Keep plenty of genuine BISSELL Deep Cleaning Formula™ and
Scotchgard™ protector cartridges on hand so you can clean and
protect whenever it fits your schedule. Always use genuine
BISSELL deep cleaning formulas.
Note: Always use genuine BISSELL deep
cleaning formulas to reduce the risk of
fire and electric shock due to internal
component damage.
1.42L / 3.78 L
BISSELL
Fiber Cleansing
Formula™ with
Scotchgard™
Protector
item # 710C /
715C
1.42L / 3.78L
BISSELL
Multi-Allergen
Removal™
Formula with
Scotchgard™
Protector
item # 720C /
725C
D
Keep plenty of genuine BISSELL
deep cleaning formula™ and
Scotchgard™ protector cartridges on
hand so you can clean and protect
whenever it fits your schedule.
Always use genuine BISSELL deep
cleaning formulas. Non-BISSELL
cleaning solutions may harm the
machine and void the warranty.
1.42L BISSELL
Natural Orange
Extract Formula
with Scotchgard™
Protector
item # 740C
11
Stain Removal
Do Not Delay! Failure to attend to an accident soon after it occurs
may cause it to set and become permanent.
Before treating any stain, follow these pre-treatment steps:
Blot up liquids with an absorbent cloth or paper towels.
White materials are recommended because certain dyes
may bleed and make the stain worse.
1.
2.
Gently scrape up semi-solids with a spoon or spatula. Do
not use a knife or other utensil with sharp edges
because it could damage the carpet or upholstery.
3.
If the area has dried, remove the remaining semi-solids
and residue with a sweeper or vacuum.
4.
Be sure to pre-test any spot removal solutions or chemicals
on an inconspicuous area first. This is extremely
important; different dyes and materials could be damaged
or discolored by a cleaning solution. If such a change
should occur, try a different solution or call a professional. If
cleaning on Berber Carpet gently run your machine over
a hidden area. If no fuzzing occurs, continue cleaning in
soiled area.
Use one of the following methods to Preclean the stain:
Using BISSELL Tough Stain Precleaner™, generously
spray the area with the formula. Gently work the solution
with a clean cloth or towel into the area using light
strokes from the edges of the stain to the center. When
you reach the center of the stain with your cloth, gently
pinch it in an upward motion. Make sure to turn and
change your cloth frequently and do not rub the stain.
You may repeat this process several times.
5.
or
Use your BISSELL deep cleaner as a Precleaner. With
one of the tools attached to hose, set the Ready Tools
Dial to Pretreat and the SmartMix Dial to the High Traffic
setting. Spray the area with solution and allow the Deep
Cleaning formula to penetrate for 3-5 minutes.
12
6.
Once the Precleaning is complete, use the attached tool
to gently scrub the stain with back and forth strokes.
7.
Allow to dry. Some difficult stains may require a second
treatment.
TurboBrush™
(Available on select models only)
Assembly
Unplug cleaner from the outlet before attaching TurboBrush. Attach
TurboBrush to the Flex Hose by pressing tool onto the Grip/Trigger
until button snaps into hole. Make certain tool is securely in place.
Use
1.
Move the TurboBrush switch to the “BRUSH” position.
This activates the brush when the unit is running.
2.
Place the tool directly on the soiled surface. Apply
downward pressure on the tool and pull towards you
while pulling trigger to spray cleaning solution.
N
IO
CT
SU
H
US
BR
3.
Release the spray trigger and move the switch to the
“SUCTION” position. Vacuum the area until no more
cleaning solution can be removed.
4.
Repeat steps 1-3 until no more dirt can be removed.
Caution: Do not overwet.
When You’re Done
1.
Disconnect the TurboBrush from the Flex Hose by pushing
down on the button lock and pulling straight off.
2.
Once removed from the Flex Hose, the TurboBrush can
be cleaned.
A) Move the switch to the “SUCTION” position
B) Rinse under running water.
C) Check spray nozzle for dirt. If necessary, clean with
a soft bristle brush.
D) Replace TurboBrush in its special storage
location on the Tool Caddy in back.
(available on select models only)
13
Scotchgard™ protector Applicator (Optional)
The Scotchgard protector applicator (with formula included) can be used to
help retain the carpet cleanliness you achieve with your ProHeat machine.
For best results the post cleaning treatment should be applied while the
carpet is still wet or damp. It is recommended that the Scotchgard protector
is applied every 12 months in all carpeted areas, and after every deep
cleaning for high traffic areas such as entryways and stairs.
Immediately after cleaning and rinsing your carpets, empty the
Tank-in-Tank and refill the Bladder with clean hot tap water.
(See page 7 & 8 for instructions.)
1.
2.
3.
Flush water through the hose to eliminate cleaning solution
from the tube by spraying water through the hose without
attachments into a sink for 15-30 seconds.
4.
Attach cartridge to the applicator tool, following instructions
on cartridge.
5.
6.
7.
Turn the SmartMix Dial to the Water Rinse/Carpet Protectant Setting.
Place the Scotchgard protector applicator onto the end of the Flex
Hose. The water from the Tank-in-Tank will automatically mix with
the concentrated protectant formula contained in the cartridge.
Before applying Scotchgard protector, test a small, hidden area
for colorfastness. Examine area when dry. If color is affected,
do not use. For upholstery, look for manufacturer’s cleanability
code tag. Use on fabrics coded “W” or “WS”. If coded “S” or
“X” do not use. Not recommended for use on velvet, silk vinyl,
leather or 100% cotton upholstery.
8.
Plan your route to leave an exit path. It is best to begin
protecting in the corner farthest from your exit.
9.
Apply Scotchgard protector in a slow sweeping motion with a
slight overlap of the treated area. For best coverage, follow the
guide on the cartridge.
10.
One 8 oz. cartridge protects 200 square feet (18.6 square
meters). This is equal to two average size rooms (each at 10 x
10 feet or 3 x 3 meters). Periodically check the product level in
the bottle to ensure best coverage.
11.
Be careful not to spray the protector onto furniture or fabric
that has not been tested for colorfastness. If this does occur,
wipe off the protector.
12.
Remove bottle from applicator tool. If concentrate is left, put
the cap on and store at room temperature for later use.
13.
With applicator tool still on the end of Flex Hose, spray clean
hot water into sink to avoid any future clogging.
14.
14
Set the ReadyTools Dial to Tools/Pretreat.
Store tool on the back of unit in the caddy.
Tip:
If clogged, soak
applicator tool in
hot tap water
before using.
How to Clean Upholstery and Small Areas
Important - Check Upholstery Tags:
Check manufacturer’s tag before cleaning. “W” or “WS” on the
tag means you can use your ProHeat. If the tag is coded with
“X” or “S” (with a diagonal strike through), or says “Dry Clean
Only,” do not proceed. The Scotchgard™ protector is not
recommended for use on velvet, silk, 100% cotton upholstery,
vinyl or leather. If manufacturer’s tag is missing or not coded,
check with your furniture dealer.
2.
Check for colorfastness in an inconspicuous place.
3.
If possible, check upholstery stuffing. Colored stuffing
may bleed through fabric when wet.
h
bv
g kvh
gh j j h
d b g
fd hn l kl
sd jkn f h
Ad bj jh
b j
cv ghh
gc
1.
Manufacturer’s tag
4.
Plan activities to give upholstery time to dry.
WARNING:
To reduce the risk of
5.
Vacuum thoroughly to pick up loose debris and pet hair.
Use a vacuum with a brush attachment and a crevice
tool to clean in fabric folds and tufts.
injury, be extra careful
when cleaning stairs.
Make sure machine is
secure and level.
Machine Preparation
1.
Set up the machine following instructions in The
Features section, pages 6-9.
2.
Use BISSELL Deep Cleaning Formula in SmartMix Tank.
3.
Set the ReadyTools dial to Tools or PreTreat.
* SmartTemp heats the cleaning solution for carpet
and bare floor application only. It does not heat
solution sprayed through the accessory tools.
4.
Set SmartMix Dial to Normal.
Cleaning Technique
1.
Choose the 4” Small Area Tool, the Tough Stain Brush, or
the Spraying Crevice Tool and connect to the Flex Hose.
2.
Plug into a proper outlet and turn Power Switch ON ( I ).
3.
While pressing the Trigger, slowly move the spraying tool back
and forth over the soiled surface. Release the Trigger to
suction soiled water.
4.
Continue to clean soiled area, working in small sections,
until no more dirt can be removed.
Caution: Do not overwet.
5.
When the cleaning job is complete refer to the
Maintenance section for machine cleanup and storage
instructions on pages 17-20.
Tip:
Deep cleaning
carpeting and
upholstery with
BISSELL MultiAllergen Removal™
Formula regularly
can reduce dust
mite waste and
allergens in your
home.
15
Cleaning Bare Floors
Tilt
Handle
Back
The Bare Floor Tool (available with select models only)
provides effective cleaning for linoleum, vinyl, and tile floors.
Caution: Do not use on hardwood floors.
Use BISSELL Floor Cleansing Formula.
1.
Handle Release
Vacuum or sweep thoroughly to pick up loose debris and pet hair.
2.
Remove easily moved furniture from the room, (chairs, tables, etc.)
3.
Carrying
Plan your cleaning route to leave an exit path.
4.
Plan activities to allow 30 minutes for the floor to dry completely.
5.
Attach the Bare Floor Tool
1.
2.
Step on the Handle Release to lay the machine handle down.
Remove the Tank-in-Tank from the machine base.
3.
Lift the machine base to expose the underside of the Floor
Nozzle Window.
4.
Attach Bare Floor Tool to Floor Nozzle Window with long tab to
the right side (ReadyTools side) of the nozzle.
5.
6.
Floor Nozzle
Bottom Front Edge of
Machine Base
Bare Floor
Cleaning Tool
First attach left side (short Tab) catching tab over nozzle edge.
Gently bend long tab (right side) outward to easily snap over
edge of clear nozzle on left.
Machine Preparation
1.
2.
3.
Set up machine following instructions in the Features
section, pages 6-9. Be sure to thoroughly rinse out any
remaining Fiber Cleansing Formula from the SmartMix Tank to
prevent slippery linoleum, vinyl, and tile floors. Use BISSELL
Floor Cleansing Formula in the SmartMix Tank.
Check ReadyTools Dial - it should be set on Floor Cleaning.
Choose the SmartMix setting to match the cleaning job.
D
4.
16
Plug into a proper outlet and turn Power Switch ON ( I ). Turn
SmartTemp Switch ON ( I ). The SmartTemp Ready Light
illuminates and the ProHeat is ready to clean.
Snap Together
Bare Floor Cleaning Technique
1.
Slowly move the machine nozzle with Bare Floor Tool
forward and back over soiled surface one time while
pressing the Trigger. Caution: Do not over wet.
2.
Repeat the motion without pressing the Trigger using the Bare
Floor Tool to squeegee and suction up the dirty water.
WARNING:
To reduce the risk of fire,
electric shock or injury
unplug from outlet
before servicing.
Repeat steps 1 and 2 backing along the exit path.
3.
Tip:
Allow about 30 minutes for the floor to dry completely.
4.
5.
When the cleaning job is complete, refer to the
Maintenance/Storage section on pages 17-20.
6.
To remove Bare Floor Tool gently bend long tab (right side)
outward and pull tool down away from nozzle. Rinse
thoroughly, dry and store
SmartMix Bottle
may be stored
with concentrate
ready for your
next cleaning job.
Make sure dial is
turned to the
Water Rinse/
Carpet Protector
Setting when
storing.
Routine Maintenance
1.
2.
3.
4.
Turn Power and SmartTemp switches OFF ( O ).
Unplug power cord from the outlet .
D
Coil Flex Hose around storage brackets on the Tool Caddy.
Coil Power Cord around Power Cord Quick Release.
5.
Remove and rinse tools in clean, running water. Dry and
replace on tool caddy.
6.
Remove Tank-In-Tank, dispose of dirty water. See Features
section, pages 7-9.
7.
Rinse out Tank-In-Tank and replace on the machine; Clean out
lint trap.
8.
9.
10.
11.
Clean out the Flow Indicator Filter each time it is used to ensure
best cleaning performance. Unscrew the Flow Indicator Cap, lift out
the red rotor and white filter. Rinse all 3 parts in tap water. Replace
the filter with the post facing upward. Replace the rotor. Replace
the Flow Indicator Cap; turn until snug, do not over-tighten.
Wipe all exterior surface with a soft cloth.
Cap
Rotor
Store cleaner upright in a protected, dry area.
Note: ProHeat uses water and must not be stored
where there is a danger of freezing. Freezing will
damage internal components and void the warranty.
When carpet is dry, vacuum again to remove hair and fuzz
that the ProHeat may have loosened.
Filter
17
Pump Belt Replacement
2
1.
Turn the machine OFF ( 0 ) and unplug from the wall outlet.
2.
Step on the Handle Release and recline the handle down onto
floor. (see illustration).
3.
Remove Tank-In-Tank and SmartMix Tanks. Set them aside
(see illustration).
3b
3a
4
4.
5.
6.
Remove Belt Access Door located near the Floor Cleaning/
Tools switch by inserting a flat head screwdriver into the slot
nearest to the handle and gently prying the access door off
(see illustration).
Turn the machine onto its side so the belt access area is
facing upward (see illustration).
5
On the bottom of the machine, near the belt access area,
is a red retainer plate that holds the black brush arm and
brush in place. Using a Phillips head screwdriver remove the
screw that holds the red retainer plate in place. Set red
retainer plate and Phillips head screw aside (see illustration).
7.
Remove the black brush arm that holds the brush in place. Set
the black brush arm aside (see illustration).
8.
Remove the “toothed” brush belt from the brush then from the
red pump pulley. Set the “toothed” brush belt and brush aside.
6
7
9.
Locate and remove broken pump belt.
8
9
18
To Install the Replacement Pump Belt
1
1.
2.
3.
With the unit still on its side, loop one end of the replacement
pump belt around the red pump pulley and then the other end
around the silver motor shaft (see illustration). Do not twist the
replacement pump belt.
Re-install the toothed brush belt first onto the red pump pulley
and then onto the toothed end of the brush (see illustration).
Re-Install the brush into the base of unit.
4.
Place the black brush arm onto the brush and slide black
brush arm into base of unit. The black brush arm and brush
should slide easily into original position (see illustration).
5.
Re-install the red retainer plate and Phillips head screw
(see illustration).
6.
2
4
5
Using your finger, gently spin the replacement pump belt on
the silver motor shaft. If assembled correctly, the replacement
pump belt should rotate freely around the silver motor shaft
and drive pulley without obstruction. The brush should also
rotate freely when the silver motor shaft is turned.
7a
7.
8.
6
7b
Turn the machine right side up and replace the Tank-InTank, SmartMix Tank and belt access door (see illustration).)
Assembly is now complete.
If you have any questions, or are having trouble installing your
replacement pump belt, please call BISSELL Consumer
Services at 1-800-263-2535.
19
WARNING:
To reduce the risk of
Troubleshooting
fire, electric shock or
injury unplug from outlet
before servicing.
Powerdrive does not seem to be engaged.
Possible Causes
Remedies
1
The Powerdrive is in the OFF position
1
Turn the Powerdrive Knob to the “ON” Position
2
Handle not fully engaged with Powerdrive position
2
Push handle in as far as it will go to feel the
most impact
SmartTemp Ready Light does not illuminate.
Possible Causes
Remedies
1
The SmartTemp Switch is not turned ON ( I )
1
Turn on the SmartTemp Switch
2
The machine Power Switch is not
turned ON ( I ).
2
Both switches must be ON ( I ) to
activate the SmartTemp Ready Light.
Reduced spray or no spray.
Possible Cause
Remedies
1
Bladder may be empty.
1
Refill Bladder with hot tap water.
2
SmartMix Tank may be empty.
2
Fill with BISSELL deep cleaning formula
for cleaning or water if
rinsing,or using the Scotchgard
protector applicator.
3
The filter may be clogged.
3
Clean out Flow Indicator Filter, page 17.
4
Tanks may not be seated properly.
4
Turn power OFF; remove & reseat
tanks. Inspect for presence of seals.
5
Pump may have lost prime.
5
Turn power OFF; after 1 minute turn
ON and depress Trigger.
6
The Pump Belt may be broken.
6
Turn the machine OFF and unplug
from the outlet. To check if a Pump
Belt has broken, you will need a flat
head screwdriver. Insert the blade end
into the lower slot of the Belt Access
door to release the lower snap. If
necessary, insert the blade end into
the upper slot to release the upper
snap. Examine the belt for breakage.
You should be able to see the Pump
Belt looped around the motor shaft. If
it is broken or missing, please refer to
Replacement Parts on page.23 before
calling Consumer Services. Complete
installation instructions will
accompany the replacement belt.
Lift Here
Insert
Screwdriver
Blade Here
20
Troubleshooting Continued
DirtLifter PowerBrush does not turn.
Possible Causes
1
The Brush Belt or Pump Belt is off or broken
Remedies
1
Turn the machine OFF and unplug from
the outlet. To check if a Pump Belt has
broken, you will need a flat head screwdriver.
Insert the blade end into the lower slot of the
Belt Access door to release the lower snap. If
necessary, insert the blade end into the upper
slot to release the upper snap. Examine the
belt for breakage. If broken refer to pages 18-19.
Carpet Protector is not spraying.
Possible Causes
1 Bottle not connected properly to the tool.
Remedies
1 Follow instructions on cartridge
assuring proper fit.
2
Solution clogging the Spray trigger.
2
Soak applicator tool only in hot water.
Spray without the cartridge attached to
purge any residual Solution left in the tool.
3
Applicator tool spray is blocked.
3
Soak applicator tool only in hot water.
Spray without the cartridge attached to purge
any residual Solution left in the tool.
4
SmartMix not set on water/rinse
carpet protector setting.
4
Set to proper setting.
5
ReadyTool dial not set on tool setting.
5
Set to tool setting.
Cleaner not picking up solution.
Possible Cause
Remedies
1
Ready Tools dial may be at the
wrong setting for the cleaning job.
1
Set ReadyTools dial to either Tools or
PreTreat or Floor Cleaning.
2
Nozzle Window may not be properly attached.
2
Press down firmly on the black oval gasket at
the top window to make sure the two tabs on
the back of the Nozzle Window are snapped
into the mating slots in the main housing.
3
Tank-in-Tank lid is not properly installed.
3
Re-install lid; refer to The Operations section,
page 10
4
Tank-in-Tank is not properly seated.
4
Tank-In-Tank must be firmly seated to
function; remove and reseat Tank-in-Tank.
5
Poor tool position. (Hand held attachments only).
5
Adjust angle; apply more downward pressure.
6
Tank-in-Tank has picked up maximum dirty water.
6
Empty Tank-in-Tank, refer to The Operations section,
page 10
21
BISSELL Consumer Services
For information about repairs or replacement parts, or questions about
your warranty, call:
BISSELL Consumer Services
1-800-263-2535
Monday - Friday
Saturday
8 am — 10 pm ET
9 am — 8 pm ET
Or write:
BISSELL Canada Corporation
P.O. Box 1003
Niagara Falls, ON. L2E 6S5
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of date of
purchase in the event of a warranty claim. See "About Your Warranty"
on page 24 for details.
Please do not return this product to the store.
22
Replacement Parts - BISSELL ProHeat™
Item Part No.
Part Name
1*
2*
3*
4*
5*
6*
7
8
9
10
11
12
13
14
15
16
17
18
4” Small Area Tool
Spraying Crevice Tool
TurboBrush™
Bare Floor Tool
PreTreat Wand
Tough Stain Brush
Tank Assembly Complete (Includes Lid Assembly)
Tank Lid Assembly
Tank Bottom (Assembly)
SmartMix™ Bottle (Includes Cap Assembly)
SmartMix™ Cap Assembly
Flow Indicator Assembly
Window Gasket
Floor Nozzle Window and Gasket
Replacement Pump Belt (With Instructions)
Replacement Brush Belt (With Instructions)
Lint Screen
Applicator Tool
210-9213
210-9148
210-1197
214-9131
214-9142
215-9155
015-9043
015-4439
015-9041
210-1785
210-1795
555-6503
210-4052
214-9865
215-0628
015-0621
213-3501
215-2152
*Not all parts are included with every model.
Keep plenty of genuine BISSELL cleaning formulas and
Scotchgard protector cartridges on hand.
19
464C
Scotchgard™ protector Cartridge 236 mL
20
710C / 715C
Fiber Cleansing Formula™ 1.42L / 3.78L
21
720C /725C
Multi-Allergen Removal™ Formula 1.42L / 3.78L
22
740C
Natural Orange Extract Formula 1.42L
23
480E
Floor Cleansing Formula 946 mL
1
2
3
ON
CTI
SU
4
5
H
US
BR
6
7
8
10
9
11
13
12
15
17
16
14
18
19
20
21
22
23
23
Warranty
If you need additional instruction regarding this warranty or have questions regarding
what it may cover, please contact BISSELL Consumer Services by e-mail, telephone, or
regular mail as described below.
Limited Two Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the
product BISSELL Canada Corporation will repair or replace (with new or remanufactured components or products), at BISSELL’s option, free of charge from the date of
purchase by the original purchaser, for two years any defective or malfunctioning part.
See information below on "If your BISSELL product should require service".
This warranty applies to product used for personal, and not commercial or rental service. This warranty does not apply to fans or routine maintenance components such as
filters, bags, belts, or brushes. Damage or malfunction caused by negligence, abuse,
or use not in accordance with the User's Guide is not covered.
If your BISSELL product should require service:
Call BISSELL Consumer Services at the number below or www.bissell.com to locate
a BISSELL Authorized Service Centre in your area. If there are no authorized BISSELL
Service Centres in your area, a BISSELL Representative at canada.custhelp@bissell.com or at the phone number below will issue you a Return Authorization Number
and a pre-paid mailing label to return the unit to BISSELL for warranty repair.
- - The machine should be returned with a photocopy of your proof of purchase. (Your
dated sales receipt is your warranty - do not send original.) If you need information
about repairs or replacement parts, or if you have questions about your warranty,
contact Bissell Consumer Services:
E-mail:
canada.custhelp@bissell.com
Or call:
BISSELL Consumer Services
1-800-263-2535
Monday - Friday 8 a.m. - 10 p.m. ET
Saturday 9 a.m.-8 p.m. ET
Or write:
BISSELL Canada Corporation
ATTN: Consumer Services,
Box 1003,
Niagara Falls, Ontario, L2E 6W2
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY.
BISSELL CANADA CORPORATION IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY
NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE
PURCHASE PRICE OF THE PRODUCT.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR
WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE TWO YEAR DURATION FROM THE DATE OF
PURCHASE AS DESCRIBED ABOVE.
©2004 BISSELL Homecare Inc.,
All rights reserved. Imported by:
BISSELL Canada Corporation
NIAGARA FALLS, ONTARIO L2E 6S5
Part Number 310-5835
24
Visit our website at:
www.bissell.com
Scotchgard is a registered
trademark of 3M
Download PDF

advertising