Bissell 9200 Vacuum Cleaner User Manual

USER’S GUIDE
9200, 9400 SERIES 220-240V
3
4-5
6
Safety Instructions
Product View / Accessories
Assembly
7-18 Features / Operations
19-20 Troubleshooting
21
Consumer Services
22-23 Replacement Parts
24
Warranty
ug310-5880_9200E_406.indd 1
6/9/06 4:25:27 PM
Thanks for buying a BISSELL ProHeat 2X
We’re glad you purchased a BISSELL ProHeat 2X heated formula deep
cleaner. Everything we know about floor care went into the design and
construction of this complete, high-tech home cleaning system.
Your ProHeat 2X is well made, and we back it with a limited two-year
warranty. We also stand behind it with a knowledgeable, dedicated
Consumer Services department, so, should you ever have a problem, you’ll
receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is
a global leader in the design, manufacture, and service of high quality
homecare products like your ProHeat 2X.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
22
www.bissell.com
ug310-5880_9200E_406.indd 2
6/9/06 4:25:29 PM
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic
precautions should be observed, including
the following:
READ ALL INSTRUCTIONS
BEFORE USING YOUR
UPRIGHT DEEP CLEANER.
Always connect to a properly Earthed
outlet. Unplug from outlet when not in
use and before conducting
maintenance or troubleshooting.
WARNING: To reduce the
risk of fire, electric shock, or injury:
■ Use indoors only
■ Do not immerse
■ Use only on surfaces moistened by
cleaning process
■ Do not leave machine when it is plugged in
■ Do not service machine when it is plugged in
■ If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent in order
to avoid a hazard
■ Do not use machine if it has been dropped,
damaged, left outdoors or dropped into water
■ Do not expose to rain, store indoors
■ Do not pull or carry by cord, use cord as a
handle, close door on cord, pull cord around sharp
corners or edges, run appliance over cord, or
expose cord to heated surfaces
■ Do not carry the appliance while in use
■ Do not unplug by pulling on cord; unplug by
grasping plug not the cord
■ Do not handle plug or appliance with wet hands
■ Do not put any object into appliance openings, use
with blocked opening or restrict air flow
■ Do not expose hair, loose clothing, fingers or body
parts to openings or moving parts
■ Do not pick up hot or burning objects
■ Do not pick up flammable or combustible
materials (lighter fluid, petrol, kerosene, etc.) or use
in the presence of explosive liquids or vapours
■ Do not use appliance in an enclosed space filled with
vapours given off by oil base paint, paint
thinner, some moth proofing substances,
flammable dust, or other explosive or toxic vapours
www.bissell.com
ug310-5880_9200E_406.indd 3
■ Remove plug from electrical outlet before cleaning
or maintaining the appliance
■ Not intended for use by young children or infirm
persons without supervision
■ Young children should be supervised to ensure
that they do not play with the appliance
■ Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, petrol, etc.)
■ Do not modify the Earthed plug
■ Do not allow to be used as a toy
■ Do not use for any purpose other than described
in this User’s Guide
■ Use only manufacturer’s recommended
attachments
■ Use only cleaning products formulated by
BISSELL for use in this appliance to prevent
internal component damage
■ Keep openings free of dust, lint, hair, etc.
■ Keep appliance on a level surface
■ Turn off all controls before unplugging
■ Be extra careful when cleaning stairs
■ Pay close attention when working
around children
SAVE THESE
INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
WARNING:
This appliance must
be Earthed.
IMPORTANT
FOR OPERATION ON
A 220-240 VOLT A.C. 50/60 Hz POWER
SUPPLY ONLY.
If your appliance is fitted with a nonrewireable
BS 1363 plug it must not be used unless a 13
amp (ASTA approved to BS 1362) fuse is fitted in
the carrier contained in the plug. Spares may be
obtained from your BISSELL supplier. If for any
reason the plug is cut off, it must be disposed
of, as it is an electric shock hazard should it be
inserted into a 13 amp socket.
3
6/9/06 4:25:29 PM
Spray Trigger
Power Switch
Heater Switch
Extra Long
Power Cord
Flex Hose
Upper Handle
Easy Carry Handle
Heat
Indicator Light
Tank Carry
Handle
Ready Tool
Dial™
Detent Pedal
2-in-1
Water Tank
Lower Base
Edge Sweep Brushes
Easy To Remove
Nozzle
Optional Accessories:
These items are available for purchase. To order replacement parts, additional tools or formulas, please refer to page 22-23.
3” Tough Stain Brush
4” Upholstery Tool
Spraying Crevice Tool
4
6' Stair Tool
TurboBrush™
Hard Floor Attachment
Scotchgard™ Protector Applicator
Tool Bag
www.bissell.com
ug310-5880_9200E_406.indd 4
6/9/06 4:25:30 PM
Spray Trigger
Upper Hose Rack
Hose Secure
Latch
Upper Handle
TurboBrush™
Storage
(select models)
Crevice Tool Holder
(select models)
Lower Hose Rack
Lower Base
Keep plenty of genuine BISSELL
Deep Cleaning Formulas on hand
so you can clean whenever it
fits your schedule. Always use
genuine BISSELL Deep Cleaning
Formulas. Non-BISSELL cleaning
formulas may harm the machine
and void the warranty.
Detent Pedal
Formula Tank
BISSELL Formulas:
These items are available for purchase. To order replacement parts, additional tools or formulas, please refer to page 22-23.
1.42 L
1.42 L
Fibre Cleansing
Multi- Allergen
Formula™ with
Removal™ Formula™
Scotchgard™
with Scotchgard™
protector
protector
www.bissell.com
ug310-5880_9200E_406.indd 5
1.42 L
Pet Odor and Soil
Removal™ Formula
with Scotchgard™
protector
1.42 L
Natural Orange
Extract Formula with
Scotchgard™ protector
1.42 L
Lavender Essence
Formula with
Scotchgard™
protector
32 oz.
Hard Floor
Solutions™
Formula
8 oz.
Scotchgard
Protector Post
Treatment
Cartridge
5
6/9/06 4:25:31 PM
How to Use this Guide
This User’s Guide has been designed to help you
get the utmost satisfaction from your BISSELL
ProHeat 2X. You’ll find assembly and operating
instructions, safety precautions, as well as
maintenance and troubleshooting instructions.
Please read this User's Guide thoroughly before
assembling your Deep Cleaner.
Pay particular attention to the product diagram,
assembly instructions, and part names. Locate
and organize all parts before assembly. Familiarize
yourself with the parts and where they go.
Following this User’s Guide will greatly enhance
your ability to get the most performance from your
BISSELL ProHeat 2X for many years.
WARNING:
Do not plug in your
cleaner until you have
completely assembled it per
the following instructions
and are familiar with all
instructions and operating
procedures.
1
2
3
4
Assembling Your ProHeat 2X
Your ProHeat 2X comes in three, easy to assemble components:
Upper Handle
Lower Handle
Tool Caddy
The only thing you will need to assemble your cleaner is
a Phillips head
screwdriver.
Refer to Assembly Diagram on page 5
1.
2.
3.
4.
5.
6.
7.
Slide upper handle onto lower handle.
Screw 3 screws into the marked holes.
Place upper hose rack onto back of upper handle
and secure with tapered screw.
Place lower hose rack onto back of upper
handle by pushing in and sliding down until it
5
snaps into place.
Snap tools into the tool caddy as shown in
Crevice
figure 5.
Holder
Wrap power cord and flex hose as shown in
(select
figure 6.
models)
Keep flex hose snugly in place by using
the hose secure latch.
ProHeat 2X assembly is now complete. Scotchgard
Tough
Stain Brush
TurboBrush
Tool
(select models)
Spraying
Crevice Tool
Protector
Applicator Tool
(select models)
(select models)
6
Hose Secure
Latch
6
www.bissell.com
ug310-5880_9200E_406.indd 6
6/9/06 4:25:36 PM
Special Features of Your BISSELL ProHeat 2X
Your BISSELL ProHeat 2X Deep Cleaner is a home
cleaning system that uses the power of heat,
brushes and cleaning formula to get the deep
down dirt for a maximum clean. Not only does it
come with a lot of unique features, it has been
designed with you, the customer, in mind.
Built-in Heater
BISSELL ProHeat models all feature a patented
built-in heater which will heat the hand hot tap
water you put in up to 25 degrees hotter to safely
optimize cleaning effectiveness. The heater
will never allow the temperature to exceed 190
degrees. The heater switch on the front of the
machine controls the heater so you have the
option to turn off the heat if you are cleaning
delicate wool or oriental rugs.
Dual DirtLifter PowerBrushes
The two DirtLifter PowerBrush rolls are
designed to enhance cleaning performance.
The bristle pattern safely lifts out the deep
down dirt while gently grooming carpet fibres.
The floating suspension self-adjusts to all
carpet heights and protects your carpet if
you leave the power switch ON ( I ). Once the
product is in the upright position, the brushes
automatically stop spinning. The detent pedal
will activate the brushes when floor cleaning.
(located behind 2-in-1 water tank)
Custom Clean™
The Custom Clean feature automatically mixes
hand hot tap water with the BISSELL Formula.
Simply choose one of the 4 settings (heavy
traffic, normal clean, light clean, or rinse) and
the ProHeat 2X will adjust the right amount of
cleaning formula to mix with the heated water
to fit your cleaning need.
This feature is available on all ProHeat 2X
models, either behind the 2-in-1 water tank or on
the upper handle.
Having a separate formula tank from the 2-in-1
water tank also allows no waste of formula.
Because the water and formula are stored
separately, they are not mixed until you are ready
to clean. When your cleaning job is finished,
the formula can be stored ready to use in your
machine for the next time!
www.bissell.com
ug310-5880_9200E_406.indd 7
OR
(located on upper handle)
7
6/9/06 4:25:37 PM
Scotchgard Protector Applicator Tool and Scotchgard Warranty
Carpet protection applied at the mill typically
wears down with heavy foot traffic over time and
with everyday cleaning, including deep cleaning.
To help restore this important protection, BISSELL
offers deep cleaning formulas with Scotchgard
protector and a post-applicator to apply
Scotchgard protector with the same materials
used by carpet mills. This offers extra protection
against dirt and tough stains to keep your carpets
looking good longer.
To maintain your Scotchgard 5-year limited stain
warranty, you no longer are required to hire a
professional cleaner. By using your BISSELL ProHeat
machine with BISSELL Formulas containing
Scotchgard protector every 12 months, your carpet
warranty from 3M remains in effect. No other home
deep cleaning system can do this for you. Refer to
the Scotchgard protector warranty for details.
2-in-1 Water Tank
Our 2-in-1 water tank full capacity system is
designed with a heavy duty bladder inside for
clean water. As you clean, the clean water in the
bladder will empty and mix with the cleaning
formula. Dirty water pulled out of your carpets will
collect around the outside of the bladder so that
clean and dirty water are always kept separate.
This allows the user to maximize tank space, yet
only carry one tank to and from the sink for
emptying and filling.
Easy to Remove and Clean Nozzle
Now, cleaning up your machine after the
cleaning process is easier than ever! Simply
remove the 2-in-1 water tank and remove the
screw to pop out the nozzle for rinsing in the
sink. Dirt, loose carpet fibres and remaining pet
hair or fuzz gets washed away in a snap.
Ready Tools Dial
This provides either floor cleaning or above the
floor cleaning with the turn of a knob. If choosing
above floor cleaning for upholstery, stairs, or in
those creases close to the baseboards, choose the
attachment appropriate for the job, attach it to the
flex hose, and you are ready to go!
8
HOSE
F
CL LOOR G
EANIN
www.bissell.com
ug310-5880_9200E_406.indd 8
6/9/06 4:25:37 PM
Before You Clean
BRUSH
SUCTION
3.
4.
9
10
XIT
Fill the 2-in-1 water tank. Remove the tank from
the base of the machine by lifting up the tank
carry handle. Carry like a bucket to the sink.
1a.
Unlatch the top of the tank from the bottom by
lifting up on the tank latch which is located on the
back of the tank.
Remove the top of the tank by lifting up on the handle.
1b.
3’
7
1
6
2
5
3
4
ATTENTION:
Some Berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may aggravate
this condition. Please see Stain
Removal instructions on page 15.
Carpet Cleaning
1.
8
11
12
S
H TA
E R
R
Plan activities to give your carpet time to dry.
Move furniture to another area if cleaning an
entire room (optional).
Vacuum area with a dry vacuum cleaner
thoroughly before deep cleaning.
Plan your cleaning route to leave an exit path. It is best
to begin cleaning in the corner farthest from your exit.
4’ E T
1.
2.
1
1a
1b
1c
Note how the lip on the top tank separates
from the groove in the bottom tank. This
placement is important when putting the
tank back together.
1c.
Fill the heavy duty bladder with clean hand hot
tap water.
*Do not boil or microwave water as it can
destroy the bladder.
1d. Leaving the filled bottom of the tank on a flat
surface, only maneuver the top of the tank. To
attach the top part of the tank to the bottom,
carefully hook the lip on the top tank into the
groove on the bottom tank.
1e. Fasten tanks together by securing the latch in
the back.
1d
Note: Remember to secure the tank latch in
the back and test to make sure it is secure
before picking up the tank.
Lip
Groove
(underside of
bottom tank)
1e
www.bissell.com
ug310-5880_9200E_406.indd 9
9
6/9/06 4:25:39 PM
Carpet Cleaning (Continued)
2.
3.
4.
5.
6.
Fill the formula tank. Fill up the formula tank
by first unscrewing the cap and insert. Always use
genuine BISSELL formulas to maximize cleaning and
for the safety of your machine. Fill formula up to the
line and replace the cap and insert. Place formula
tank into the slot in the back of the machine for a
snug fit.
Set Custom Clean dial. Simply choose one of the
4 settings (heavy traffic, normal clean, light clean,
or rinse) and the ProHeat 2X will adjust the right
amount of cleaning formula to mix with the heated
water to fit your cleaning need.
Set Ready Tools dial to the floor
cleaning setting.
Plug into a proper outlet and turn the power
and heater switches to the ON ( I ) position.
Allow one minute for the built-in heater to
warm-up before cleaning. The ProHeat 2X will be
fully warmed and will provide optimal performance
after one minute of continuous heated cleaning.
Cleaning strokes. While pressing the spray
trigger, make one slow forward wet pass and
another one back. Let the built-in heater, formula,
and DirtLifter PowerBrushes do the work for you.
Caution: Do not overwet.
Take care not to run over loose objects or edges
of area rugs. Stalling the brush may result in
premature belt failure.
Note: Your machine is equipped with a
circuit breaker that will automatically shut
off the brush if a large or loose object is
caught in the brush roll. If that happens, be
sure to unplug your machine, remove the
foreign object, and then plug the machine
back in to reset the circuit breaker.
Release the spray trigger and make one slow
forward and backward pass over the same area to
remove any residual dirty water and aid in drying.
Repeat cleaning passes until water being pulled
up appears clean. Continue passes without
pressing the spray trigger until you can’t see any
more water being pulled up. After cleaning, you
may want to turn the Custom Clean dial to rinse to
give your carpeting a final water only rinse. This
will ensure thorough removal of embedded dirt
loosened by the formula. BISSELL Deep Cleaning
Formulas contain an anti-resoiling agent that
helps your carpets repel dirt and keeps them
looking good longer.
10
2
2a
3
OR
4
5
HOSE
F
CL LOOR G
EANIN
Power Switch
Heater Switch
WARNING:
To Reduce the Risk of Fire and
Electric Shock due to internal
component damage, use only
BISSELL Deep Cleaning Formulas
intended for use with the deep
cleaner.
Keep plenty of genuine BISSELL Deep
Cleansing Formula and Scotchgard™
protector cartridges on hand so you can
clean and protect whenever it fits your
schedule. Always use genuine BISSELL
Deep Cleaning Formulas. Non-BISSELL
cleaning formulas may harm the
machine and void the warranty.
www.bissell.com
ug310-5880_9200E_406.indd 10
6/9/06 4:25:39 PM
Carpet Cleaning (Continued)
7
7a
7a.
Unlatch the top of the tank from the bottom by lifting up
on the tank latch which is located on the back of the tank.
7b.
Remove the top of the tank by lifting up on the handle. 7b
7c
7.
Remove the tank from the base of the machine
by lifting up on the tank carry handle. Carry like a
bucket to a utility sink or outside where you will
dispose of the dirty water.
Note how the lip on the top tank separates
from the groove in the bottom tank. This
placement is important when putting the
tank back together.
7c.
Lift the bottom portion of the tank and pour out
dirty water toward the sink through the triangular
shaped opening in the corner of the tank.
Note: You may notice hair & debris deposits on
the carpet or in the tank that were loosened
by the cleaning action (especially with newer
carpets that have never been deep cleaned
before). This debris should be picked up and
thrown away.
7d.
7e
7f
7g
Fill the heavy duty bladder with clean hand hot tap
water, following instructions 1c through 1e on page 9.
Note: Remember to secure the tank latch in
the back and test to make sure it is secure
before picking up the tank. Always check
the level of cleaning formula in the formula
tank at the same time and refill as needed.
8.
7d
Rinse (Optional). Rinsing is an optional step that can
be done during the cleaning process by switching
from one of the clean settings on the Custom Clean
dial to a rinse setting, or it can be done after the
carpeted area has been cleaned. Simply choose the
8a
rinse setting on the Custom Clean dial, and follow
the same path as you did for cleaning, taking care
to do a forward (wet) stroke by depressing the spray
trigger, a backward (wet) stroke, and a forward and
backward (dry) stroke, releasing the spray trigger.
Continue this until the water you see coming up the
nozzle is clear.
or
After Cleaning
Machine Storage
Once your cleaning is complete, make sure the
2-in-1 water tank is emptied, rinsed out, and
dried before the next use. The formula tank can
remain filled and ready to go, or it can simply
be emptied back into the formula bottle if that is
more convenient.
Note: Store cleaner in a protected, dry
area. Since this product uses water, it must
not be stored where there is a danger of
freezing. Freezing will damage internal
components and void the warranty.
www.bissell.com
ug310-5880_9200E_406.indd 11
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
11
6/9/06 4:25:40 PM
After Cleaning (Continued)
Machine Care
3
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1.
2.
3.
4.
5.
6.
7.
8.
12
Turn power and heater switches OFF (O). Unplug
the machine and wrap the power cord.
After emptying the 2-in-1 water tank, rinse it out
at a faucet with running hand hot tap water, taking
care to clean underneath the heavy duty bladder
and all around it.
The top half of the tank can be rinsed clean
through the nozzle area. Also, pop out the red filter
underneath the top half of the tank and rinse that
out. Replace before putting the top and bottom
halves of the tank together.
Before you place the cleaned 2-in-1 water tank
back onto the machine, simply unscrew the nozzle
using a Phillips head screwdriver
. This can be
rinsed out at the faucet. Then replace back onto
the machine by starting from the bottom of the
nozzle and hooking the tabs into the holes on the
bottom sides of the machine. Secure into place
with the screw.
The inside of the end caps by the brush rolls can be
wiped out with a clean paper towel, or, if a more
thorough cleaning is desired, the end caps can be
taken off using a Phillips head
screwdriver and
rinsed clean. Replace after cleaning.
Filter
Tip:
Let all parts dry completely
before storing
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
Any loose hair or debris can be pulled from the brush
rolls and thrown away. For the most thorough clean
before storage, follow directions on pages 17 & 18 for
removal and replacement of the brush rolls and belts.
To clean attachments that may have been used,
remove from hose and rinse in clean, running water.
Dry and replace attachment in the tool caddy. Clean
the flex hose by suctioning clean water from the tap.
Before replacing, lift end of flex hose and stretch out
to ensure all water is cleared from flex hose. Refer to
page 14, illustrations 9 & 10.
After carpet is dry, vacuum again to remove hair
and fuzz.
www.bissell.com
ug310-5880_9200E_406.indd 12
6/9/06 4:25:41 PM
Post-Treatment Scotchgard Protector* (Optional)
Some models are equipped with a Scotchgard
protector post-treatment applicator and cartridge.
Using this, along with one of the BISSELL Deep
Cleaning Formulas containing Scotchgard, to help
retain the carpet cleanliness achieved with the
ProHeat 2X machine. For best results, the post
cleaning treatment should be applied while the
carpet is still damp. It is recommended that the
Scotchgard protector be applied every 12 months
to all clean carpeted areas, and after every deep
cleaning for high traffic areas such as entryways
and stairs.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Immediately after cleaning and rinsing your carpets,
empty the 2-in-1 water tank and refill the heavy duty
bladder with clean hand hot tap water.
Set Ready Tools dial to the hose/attachment setting.
Purge the hose to eliminate cleaning formula from the
tube by spraying clean water through the flex hose
(without attachments) into a sink for 15-30 seconds.
Attach Scotchgard protector post-treatment
cartridge to the applicator tool, following the
instructions on the cartridge. Attach the combined
tool/cartridge to the flex hose. The water from the
2-in-1 water tank will automatically mix with the
concentrated Scotchgard protector post-treatment
formula contained in the cartridge.
Turn the Custom Clean dial to the rinse/protect setting.
Before applying Scotchgard protector to a
large area, test in a small, hidden area for
colourfastness. Examine area when dry. If colour
is affected, do not use. For use on upholstery, look
for manufacturer’s cleanability code tag. Use only
on fabrics coded “W” or “WS”. If coded “S” or “X”,
do not use. Not recommended for use on velvet,
silk vinyl, leather, or 100% cotton upholstery.
Apply Scotchgard protector in a slow sweeping
motion with a slight overlap of the treated area. For
best coverage, follow the guide on the cartridge.
One 8 oz. cartridge protects 200 square feet (18.6
sq. meters). This is equal to two average size rooms,
(each at 10 x 10 ft. or 3 x 3 meters). Periodically check
the level in the bottle to ensure the best coverage.
Be careful not to spray the Scotchgard protector
onto furniture or fabric that has not been tested
for colourfastness. If this does occur, wipe off the
Scotchgard protector.
When finished remove the cartridge from the
applicator tool. If formula is left, replace the cap to the
cartridge and store at room temperature for later use.
With the applicator tool still on the end of the flex
hose, spray clean hand hot tap water into the sink
to avoid any future clogging. Let dry before storing.
Store applicator tool in a convenient location for
use the next time.
www.bissell.com
ug310-5880_9200E_406.indd 13
3
4
Tip:
If clogged, soak
applicator tool
in hand hot tap
water before
using.
7
11
13
6/9/06 4:25:41 PM
Cleaning with Attachments
Your ProHeat 2X machine comes equipped with a
flex hose and at least one cleaning tool for cleaning
stairs, upholstery, and more.
1.
3.
4.
5.
6.
Follow the instructions on pages 9 & 10 for filling the
2-in-1 water tank and the formula tank.
Set Ready Tools dial to the hose attachments setting.
This will allow spray and suction from the flex hose.
Set Custom Clean dial for heavy traffic, normal clean,
light clean, or rinse, as desired
Attach the cleaning tool to the end of the hose.
Plug in and turn on the power switch.
Note: The built-in heater heats the cleaning
formula for carpet and hard floor application
only. It does not heat the cleaning formula
through the accessory tools.
7.
8.
9.
10.
11.
12.
13.
14
Clean by pressing the spray trigger to spray formula
onto the area to be cleaned. Slowly move the tool back
and forth over the soiled surface. Release the spray
trigger to suction soiled water. Continue to clean in the
area, working in small sections, until no more dirt can
be removed. Rinse (optional) and suction as needed.
Caution: Do no overwet.
9
Remove and rinse tools in clean, running water.
Dry and replace in the tool caddy.
It is recommended that you suction clean water
from the tap to rinse out the flex hose.
bvh
g kvh
gh j j h
d b lg
fd hn l kl
sd jkn f h
Ad bj jh
b j
cv hh
gcg
2.
Important! If using to clean upholstery, check upholstery tags.
A. Check manufacturer’s tag before cleaning. “W” or
“WS” on the tag means you can use your ProHeat 2X.
If the tag is coded with an “X” or an “S” (with a
diagonal stripe through it), or says “Dry Clean Only”,
do not proceed with any deep cleaning machine. Do
not use on Velvet or Silk. If manufacturer’s tag is
missing or not coded, check with your furniture dealer.
B. Check for colourfastness in an inconspicuous place.
C. If possible, check upholstery stuffing. Coloured
stuffing may bleed through fabric when wet.
D. Plan activities to allow upholstery time to dry.
E. Vacuum thoroughly to pick up loose debris and pet
hair. Use a vacuum with a brush attachment and a
crevice tool to clean in fabric folds.
Manufacturer’s tag
WARNING:
To reduce the risk of
injury, be extra careful
when cleaning stairs.
Make sure machine is
secure and level.
5
10
Before replacing, lift end of flex hose and stretch
out to ensure all water is cleared from flex hose.
Coil flex hose around the tool caddy.
Empty 2-in-1 water tank and rinse out, following the
instructions on page 11.
Return Ready Tools dial to floor setting.
www.bissell.com
ug310-5880_9200E_406.indd 14
6/9/06 4:25:42 PM
Cleaning Formula Section
Keep plenty of genuine BISSELL Deep Cleaning Formula and Scotchgard
protector post-treatment cartridges on hand so you can clean and protect
whenever it fits your schedule. Always use genuine BISSELL Deep Cleaning
Formulas.
1.42 L
Fiber Cleansing
Formula™ with
Scotchgard™
protector
item # 710E
1.42 L
Multi-Allergen
Removal™ Formula
with Scotchgard™
protector
item # 720E
1.42 L
Pet Odor and Soil
Removal™ Formula
with Scotchgard™
protector
item # 730E
1.42 L
Natural Orange
Extract Formula™ with
Scotchgard™ protector
item # 740E
1.42 L
Lavender Essence
Formula™ with
Scotchgard™ protector
item # 750E
Stain Removal
Do not delay! Attending to an accident soon after it
occurs ensures the most optimal clean. Leaving it for
an extended period of time may cause it to set and
become permanent.
1.
Blot up liquids with an absorbent cloth or paper towels.
White materials are recommended because certain dyes
may bleed and make the stain worse.
2.
Gently scrape up any semi-solids with a spoon or spatula.
Do not use a knife or other utensil with sharp edges
because it could damage the carpet or upholstery.
If the area has dried, remove the remaining
semi-solids and residue with a sweeper or vacuum.
Be sure to test any spot removal formulas in an
inconspicuous area first. This is important as some dyes and
materials could be damaged or discoloured by cleaning
formulas. If such a change should occur, try a different
formula or call a professional.
Use your Proheat 2X as a precleaner. With one of the tools
attached to the flex hose, set the Ready Tools dial to the
hose attachments setting and the Ready Tools dial to heavy
traffic. Spray the area with cleaning formula and allow the
BISSELL Deep Cleaning Formula to for penetrate 3-5 minutes.
3.
4.
5.
WARNING:
To reduce the risk of
fire and electric
shock due to internal
component damage,
use only BISSELL Deep
Cleaning Formula
intended for use with
the deep cleaner.
Non-BISSELL cleaning
formula may harm the
machine and void the
warranty.
Note: If cleaning on Berber carpeting, gently run your
machine over a hidden area. If no fuzzing occurs,
continue cleaning in soiled area.
7.
8.
Once the precleaning is complete, use the attached tool to
gently scrub the stain with back and forth strokes.
Allow time to dry. Some difficult stains may require a second treatment.
www.bissell.com
ug310-5880_9200E_406.indd 15
15
6/9/06 4:25:42 PM
Hard Floor Cleaning
Your ProHeat 2X model may come with a hard
floor tool and Hard Floor Solutions Formula. If
not, these products are available for purchase
by contacting the BISSELL Consumer Services
department by phone. The hard floor tool
provides effective cleaning for linoleum, vinyl,
and tile floors.
Caution: Do not use on unsealed hardwood floors.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
16
Vacuum or sweep thoroughly to pick up any loose
debris and pet hair.
Move any furniture, if needed.
Empty any carpet cleaning formula back into the
BISSELL bottle if stored in the formula tank.
Fill formula tank with BISSELL Hard Floor
Solution Formula.
Fill the 2-in-1 water tank with hand hot tap water
and set aside.
Attach the hard floor tool onto the bottom of the
machine by hooking it into the nozzle and swinging
it down until it clicks into place.
WARNING:
To reduce the risk of fire,
electric shock or injury
unplug from outlet before
servicing.
5
Check Ready Tools dial. It should be set on
floor cleaning.
Set the Custom Clean dial to normal clean.
Plug in and turn on the power switch and
heater switch.
Slowly move the machine forward and back over
bare floor surface one time while depressing
spray trigger.
Caution: Do not overwet.
Repeat the motion without pressing the spray
trigger using the hard floor tool to squeegee and
suction up the dirty water.
Allow adequate time for floors to dry.
Remove hard floor tool, rinse and dry before storing.
If any formula remains in the formula tank, pour
it back into the Hard Floor Solutions bottle for use
the next time.
Rinse out the formula tank.
www.bissell.com
ug310-5880_9200E_406.indd 16
6/9/06 4:25:45 PM
Small Belt Removal and Replacement Instructions
Occasional replacement of one or both belts may
become necessary. If that is needed, please
follow the instructions below.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Turn off the machine, and unplug it from the outlet.
Remove both the 2-in-1 water tank and the
formula tank. Set aside.
Unscrew the nozzle and remove it. Set aside.
Turn the machine on its side.
IMPORTANT: Make sure that the cord side is down.
Remove the clear end cap by unscrewing the 2
black screws. Take care not to drop the screws
into the unit.
Remove 1 silver screw.
Remove pivot arm by gently lifting up.
Remove small brush belt.
Replace small brush belt, and reverse steps above.
www.bissell.com
ug310-5880_9200E_406.indd 17
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
1
2
3
3a
4
5
6
7
8
9
17
6/9/06 4:25:45 PM
Brush Removal and Large Belt Replacement Instructions
Brushes can be removed for cleaning or
replacement as needed.
1.
2.
3.
4.
5.
6.
7.
8.
Follow Small Belt Removal Instructions on page 17.
Remove brush rolls by pulling them off of the
metal rods.
Place cleaned or new brush rolls back onto the rods.
Make sure one washer is on each end of the rollers
prior to sliding onto the rod. Be sure to let the rod
slide through the bushing to insure proper fit.
Re-attach the long belt on the bottom to the cogs
of the small roller brushes.
Place small belt over back roller and metal cog.
Place pivot arm in place and screw in place using
the silver screw.
Re-attach clear end cap by tightening with the (2)
black screws.
Return nozzle to front of unit, by latching from
underneath and then securing with a screw.
If you have any questions or are having trouble
installing or replacing your belt(s) or brushes,
please call BISSELL Consumer Services in the
UK at 0870.225.0109, in Australia at 1.800.811.183
or in New Zealand at 0800.247.735.
For all other countries call our U.S. A.
Headquarters at 616.453.4451 or visit the
BISSELL Website: www.bissell.com
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
2
3
4
5
6
7
8
18
www.bissell.com
ug310-5880_9200E_406.indd 18
6/9/06 4:25:46 PM
Troubleshooting
WARNING:
To reduce the risk of fire,
electric shock or injury
unplug from the outlet
before servicing.
Built-in heater ready light does not illuminate
Possible Cause
Remedies
1. The heater switch is not turned ON ( I ).
2. The power switch is not turned ON ( I ).
1. Turn the heater switch ON ( I ).
2. Both switches must be ON ( I ) to
activate the heater ready light.
Reduced spray or no spray.
Possible Cause
Remedies
1. 2-in-1 water tank may be empty.
1. Fill heavy duty bladder with hand hot
tap water.
2. Fill formula tank with BISSELL Deep
Cleaning Formula for cleaning.
3. Turn power switch OFF ( O ).
remove and reseat 2-in-1 water tank.
4. Turn power switch OFF ( O ) and
then back ON ( I ). Wait one minute,
then depress spray trigger.
2. Formula tank may be empty.
3. 2-in-1 water tank may not be
seated completely.
4. Pump may have lost prime.
DirtLifter PowerBrushes do not turn
Possible Cause
Remedies
1. The brush is off or broken.
1. Turn power switch OFF ( O ) and
unplug unit from outlet. Follow
instructions on page 17.
2. The unit is in the upright position.
2. Brushes only rotate when unit is
reclined using the detent pedal.
3. Circuit breaker may have tripped.
3. Turn the power switch OFF ( O ) and
unplug from outlet. Check to see if
foreign object is caught in brush roll.
remove object. Plug machine back in
to reset circuit breaker.
Scotchgard protector applicator tool is not spraying
Possible Cause
Remedies
1. Cartridge is not connected to the tool.
1. Follow instructions on cartridge to
assure proper fit.
2. Ready Tools dial on floor setting.
2. Set Ready Tools dial to hose
attachments setting.
3. Formula clogging the spray trigger.
3. Soak applicator tool only in hand hot
water. Spray without the cartridge
attached to purge any residual
formula left in the applicator tool.
www.bissell.com
ug310-5880_9200E_406.indd 19
19
6/9/06 4:25:46 PM
Troubleshooting (Continued)
Cleaner not picking up solution
Possible Causes
1. Ready Tools dial may be at wrong setting.
2. 2-in-1 water tank may not be seated properly.
3. 2-in-1 water tank may not be assembled properly.
4. Formula or 2-in-1 water tank is empty.
5. 2-in-1 water tank has picked up
maximum dirty water and red float
door has closed.
6. Red float "door" in the tank may have closed
as a result of bumping an object or moving
machine back and forth too quickly.
20
Remedies
1. Set Ready Tools dial to either
floor cleaning or hose
attachments setting.
2. Pick up both the 2-in-1 water
tank and formula tank and
reseat them so they fit snugly on
the unit.
3. Check to make sure the "lip" of
the nozzle is securely hooked
into the groove on bottom of
2-in-1 water tank (see page 9).
4. Check water levels in heavy duty
bladder and formula tank.
5. Empty 2-in-1 water tank. Refill
heavy duty bladder with clean
hand hot tap water and replace.
6. Turn the machine OFF ( O ),
allowing red float door to release into
the open position. Turn unit back
ON ( I ) to continue cleaning. Be
sure your forward and backward
strokes are done at a slower pace.
www.bissell.com
ug310-5880_9200E_406.indd 20
6/9/06 4:25:47 PM
BISSELL Consumer Services
If your BISSELL product should require service:
In the UK, Australia, or New Zealand, call BISSELL Consumer Services at the numbers below and we will give you
the location of a BISSELL Authorized Service Center in your area. For all other countries, contact your local in
country distributor for questions, service, or repair.
If you have questions about your warranty or need replacement parts please contact the numbers below.
For UK inquiries:
Monday - Thursday 9 am — 5 pm
Friday 9 am — 4 pm
BISSELL Homecare (Overseas) Inc.
The Boat Yard
105 Straight Road
Old Windsor
Berkshire, SL4 2SE
United Kingdom
Telephone: 0870-225-0109
For Australian inquiries:
24 hours a day 7 days a week
E.D. Oates Pty Ltd
76 - 82 Newlands Road
Reservoir VIC 3073
Australia
Telephone: 1-800-811-183
For New Zealand inquiries:
Monday - Friday 9 am — 5 pm
Parex Appliances
103 Central Park Drive
Henderson
Auckland
New Zealand
Telephone: 0800-247-735
For all other inquiries:
Monday - Friday 8 am — 4 pm
BISSELL Homecare, Inc.
PO Box 1888
Grand Rapids, MI 49501 USA
Telephone: 01-616-453-4451
Fax: 01-616-453-1383
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
Note: Please keep your original sales receipt. It provides proof of date of purchase in the event of a
warranty claim. See Warranty on page 24 for details.
Please do not return this product to the store.
www.bissell.com
ug310-5880_9200E_406.indd 21
21
6/9/06 4:25:47 PM
Replacement Parts - BISSELL ProHeat 2X
Replacement Parts*
Below please find a list of common replacement parts. While not all of these parts may
have come with your specific machine, all are available to you for purchase, if desired.
Item
Part No.
Part Name
1
2
3
4
5
6
7
8
203-6651
203-6652
203-6653
203-6654
203-6655
203-6692
203-6691
203-6611
9
10
203-6660
203-6618
11
12
13
14
15
16
17
18
19
203-6601
203-6675
203-6676
203-6677
203-6678
203-6679
203-6680
203-6681
203-6682
20
21
22
23
24
25
26
27
203-6685
203-6686
203-6688
203-6804
203-6689
203-6690
710E
720E
28
730E
29
740E
30
31
32
750E
0484
0464
3” Tough Stain Tool
Powered TurboBrush Hand Tool
4” Upholstery Tool
6” Wide Stair Tool
Spraying Crevice Tool
Hard Floor Tool
Scotchgard Applicator Tool
Grey Tank Assembly (complete) for Black unit (Blue or
Purple complete tank assemblies available upon request)
Grey Tank Lid (Blue or Purple Tank Lids available upon request)
Grey Tank Bottom (Blue or Purple Tank Bottoms available
upon request)
Hose Assembly
Cap and Insert for Water Tank
Formula Tank (includes Cap & Insert for Formula Tank)
Cap and Insert for Formula Tank
Front Nozzle (includes gasket)
Autoload Gasket (fits both Water and Formula Tank)
Filter with Door
Water Tank Latch
Cord Wrap (Black) (Blue or Purple cord wrap available
upon request)
Clear End Cap w/Edge Brushes (2 pack, includes screws)
Brush Roll – 6 row (includes 1 brush, axle, 2 swivel arms)
Small Brush Belt (non-cord side)
Large Brush Belt (cord side)
Hose Secure Latch
Hose Rack Assembly (Top/Bottom Hose Rack, Screws)
1.42 L Fiber Cleansing Formula™ with Scotchgard™ protector
1.42 L Multi-Allergen Removal™ Formula with
Scotchgard™ protector
1.42 L Pet Odor and Soil Removal™ Formula with
Scotchgard™ protector
1.42 L Natural Orange Extract Formula™ with
Scotchgard™ Protector
1.42 L Lavender Essence Formula™ with Scotchgard™ protector
32 oz. Hard Floor Solutions™
Scotchgard Protector Post Treatment Cartridge
*Not all parts are included with every model.
22
www.bissell.com
ug310-5880_9200E_406.indd 22
6/9/06 4:25:47 PM
Replacement Parts - BISSELL ProHeat 2X
26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
27
www.bissell.com
ug310-5880_9200E_406.indd 23
28
29
30
31
32
23
6/9/06 4:25:48 PM
Warranty - BISSELL ProHeat 2X
This warranty gives you specific legal rights, and you may also have other rights which may vary from country
to country. If you need additional instruction regarding this warranty or have questions regarding what it may
cover, please contact BISSELL Consumer Services by telephone, or regular post as described below, or
contact your local in country distributor.
Limited Two Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, BISSELL Homecare, Inc., will replace (with
new or remanufactured components), at BISSELL’s option, free of charge from the date of purchase by the
original purchaser, for two years any defective or malfunctioning part do to manufacturers defect.
This warranty applies to product used for personal, and not commercial or rental service. This warranty does
not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction
caused by negligence, abuse, or use not in accordance with the User’s Guide is not covered.
For UK inquiries:
Monday - Thursday 9 am — 5 pm
Friday 9 am — 4 pm
BISSELL Homecare (Overseas) Inc.
The Boat Yard
105 Straight Road
Old Windsor
Berkshire, SL4 2SE
United Kingdom
Telephone: 0870-225-0109
For Australian inquiries:
24 hours a day 7 days a week
E.D. Oates Pty Ltd
76 - 82 Newlands Road
Reservoir VIC 3073
Australia
Telephone: 1-800-811-183
For New Zealand inquiries:
Monday - Friday 9 am — 5 pm
Parex Appliances
103 Central Park Drive
Henderson
Auckland
New Zealand
Telephone: 0800-247-735
For all other inquiries:
Monday - Friday 8 am — 4 pm
BISSELL Homecare, Inc.
PO Box 1888
Grand Rapids, MI 49501 USA
Telephone: 01-616-453-4451
Fax: 01-616-453-1383
BISSELL HOMECARE INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT.
BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES
EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE
BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
TO THE TWO YEAR DURATION FROM THE DATE OF PURCHASE AS
DESCRIBED ABOVE.
©2006 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 310-5880
Rev 6/06
Visit our website at:
www.bissell.com
Scotchgard is a trademark of 3M
24
www.bissell.com
ug310-5880_9200E_406.indd 24
6/9/06 4:25:51 PM