Operating instructions | Blaupunkt Denver CD70 Car Stereo System User Manual

Radio / CD
Denver CD70
Hamburg CD70
Orlando CD70
Phoenix CD70
Operating instructions
Bitte aufklappen
Open here
Ouvrir s.v.p.
Aprite la pagina
Hier openslaan a.u.b.
Öppna
Por favor, abrir
Favor abrir
2
14
SVENSKA
NEDERLANDS
3
13
4
12
5
11
10
9
8
ESPAÑOL
2
PORTUGUÊS
1
ITALIANO
6
7
3
FRANÇAIS
ENGLISH
DEUTSCH
OPERATING ELEMENTS
1
2
3
4
5
6
7
8
9
:
;
<
=
>
32
button for opening the control unit
Button for switching the device on and
off and for muting the device
Volume control
Softkeys. The function of the Softkeys
depends on the contents of the display at the time
OK button for confirming menu entries
and for leaving the menu
DEQ button for calling up the equalizer menu
Multi-function rocker
MENU button, which calls up the basic settings menu
AUD button for adjusting bass, treble,
balance, fader and loudness
DIS button, to change the contents of
the display
Display
CD button, to start playing the CD
CDC button, to start play from the CD
changer (only if connected) or
play from an external audio source
(only if connected)
TUNE button, to begin radio operation
Calling up the radio function menu
(only possible when the radio is
switched on)
37
38
39
40
41
Switching on radio operation ................. 41
RDS convenience function (AF, REG) ... 41
Select waveband/memory level ............. 42
Setting the station ................................. 42
Adjusting the sensitivity of the station
search ................................................... 42
Saving a station ..................................... 43
Saving a station automatically
(Travelstore) .......................................... 43
Going to a preset station ....................... 43
Scanning through stations .................... 43
Adjusting the sample duration
(Scantime) ............................................. 44
Program type (PTY) .............................. 44
Optimising radio reception .................... 45
Switching between stereo and mono .... 46
Changing the displayed information ...... 46
Traffic Information ........................ 46
CD operation ................................. 47
Starting CD operation and inserting
the CD ................................................... 47
CLOCK - Time ............................... 54
Setting the time ..................................... 54
Selecting 12/24-hour clock mode .......... 55
Having the time displayed constantly
when the device is switched off ............. 55
Equalizer ....................................... 55
Adjustment instructions ......................... 55
Switching the equalizer on and off ........ 55
Adjusting the equalizer .......................... 56
Adjusting the sharpness of the filter ...... 56
Selecting the tone preset ...................... 56
Adjusting the level indicator .................. 56
Equalizer adjustment guide ................... 57
External audio sources ................ 58
TMC for dynamic navigation
systems ......................................... 58
Pre-amplifier / subout .................. 59
Technical data .............................. 59
Installation instructions ............. 226
33
ENGLISH
FRANÇAIS
Starting CD changer operation ............. 51
Selecting a CD ...................................... 51
Selecting a track .................................... 51
Fast searching (audible) ........................ 51
Changing the display contents .............. 51
Repeating play of individual tracks or
whole CDs (REPEAT) ........................... 51
Playing tracks in random sequence
(MIX) ..................................................... 51
Sampling all tracks on all CDs (SCAN) . 52
Naming CDs .......................................... 52
Programming favourite CD tracks ......... 53
ITALIANO
Switching On and Off ...................
Adjusting the Volume ...................
Tone and Volume ..........................
Adjusting the Display ..................
Radio Operation ...........................
CD changer operation (optional) 51
NEDERLANDS
Inserting the KeyCard ........................... 35
Removing the KeyCard ......................... 35
“Training” a second KeyCard /
Replacing the KeyCard ......................... 35
KeyCard lost or damaged ...................... 36
Training a new KeyCard / entering the
master code .......................................... 36
Visual theft protection (LED) ................. 36
Display Radio Passport Data ................ 37
Care of the KeyCard .............................. 37
SVENSKA
KeyCard Theft Protection ............ 35
Removing the CD .................................. 48
Selecting a track .................................... 48
Fast searching (audible) ........................ 48
Random track replay (MIX) ................... 48
Scanning tracks (SCAN) ....................... 48
Repeating tracks (REPEAT) .................. 48
Changing the display contents .............. 48
Traffic announcements with CD
operation ............................................... 49
Programming favourite CD tracks ......... 49
Naming CDs .......................................... 50
ESPAÑOL
Road safety ........................................... 34
Fitting .................................................... 34
Accessories ........................................... 34
Guarantee ............................................. 34
International telephone information ....... 34
PORTUGUÊS
Note ............................................... 34
DEUTSCH
CONTENTS
NOTES
Thank you for choosing a Blaupunkt product.
We hope your new device brings you a lot of
pleasure.
Note
Before you use your car radio for the first time,
please read this guide carefully and make
yourself familiar with the device. Keep this
guide in the car for later reference.
Road safety
Road safety has the first priority. Only
make adjustments to your car radio when
the traffic conditions allow. Familiarise yourself with the device before you start driving.
You must be able to hear audible alarms
from police vehicles, fire engines or ambulances promptly when inside the vehicle. You must therefore listen at an appropriate volume when travelling.
Fitting
If you want to fit your car radio yourself, read
the fitting and connecting notes at the end of
the guide.
Accessories
Only use accessories approved by Blaupunkt.
Remote control
You can control the basic functions of your
car radio safely and conveniently with any of
the optional remote controls RC 08, RC 10 or
RC 10H.
Amplifier
Any Blaupunkt amplifier can be used.
34
CD changer
The following Blaupunkt CD changers can be
connected:
CDC A 06, CDC A 08, CDC A 072 or IDC
A 09.
If an adapter cable is used (Blaupunkt no.
7 607 889 093) the CDC A 05 or CDC A 071
CD changers can also be connected.
Guarantee
The extent of the guarantee depends on the
statutory conditions applicable in the country
where the device was bought.
Regardless of statutory requirements, Blaupunkt offer a twelve month guarantee.
If you have any questions about your guarantee, please refer to your authorised Blaupunkt dealer. In every case the purchase receipt constitutes the guarantee documentation.
International telephone
information
If you have any questions about the operation of the device, or if you need any other
information, please call us!
The numbers for the telephone information
are on the last page of this guide.
➮ Press the
button, 1.
The control unit opens.
➮ Insert the KeyCard, as shown in the di-
2
agram (arrow 1), with the contact surfaces downwards.
Removing the KeyCard
In order to unlock the control unit
➮ press the
button, 1.
The control unit opens.
➮ Push the card with the “carriage” to the
Note:
In order to prevent theft, remove the KeyCard
whenever you leave the vehicle, and leave the
control unit opened.
For reasons of safety the control unit
must always be closed when the vehicle is
moving.
“Training” a second KeyCard /
Replacing the KeyCard
A second KeyCard can be “trained” as a substitute if the device is operating with the first
KeyCard.
If you want to “train” a second KeyCard
device on.
3
➮ Press the MENU button, 8.
35
ENGLISH
NEDERLANDS
right as far as the stop.
➮ Remove the card from the control unit.
➮ Close the control unit.
➮ insert the first KeyCard and switch the
1
FRANÇAIS
Note:
If the wrong kind of card, such as a cashpoint
card, is inserted into the device, “Wrong KC”
will appear on the display. Remove the incorrect card, and insert a KeyCard that is known
to the device.
ITALIANO
➮ Close the control unit (arrow 3).
SVENSKA
Inserting the KeyCard
the direction of the arrow (2) carefully as
far as the stop.
ESPAÑOL
A KeyCard is included with your car radio.
The radio can also be operated with a second KeyCard.
If one KeyCard becomes lost or damaged you
can obtain a replacement through your Blaupunkt dealer.
If you use two KeyCards, the settings of the
first KeyCard are adopted by the first KeyCard. You can, however, store the following
functions separately:
station button allocation, bass, treble, balance
and fader settings, loudness, traffic announcement volume, beep volume and equalizer adjustment.
In addition to this, the last values selected for
the waveband, station setting, traffic announcements, RDS, REG, scan time, search
sensitivity, initial volume and SHARX are
stored.
This means that the basic settings you have
selected are made as soon as the KeyCard
is inserted.
➮ Push the KeyCard with the carriage in
PORTUGUÊS
KeyCard theft protection
DEUTSCH
THEFT PROTECTION
THEFT PROTECTION
or button, 7, until
“LEARN KC” appears in the display.
➮ Press the
➮ Press the
button, 7.
“CHANGE” appears in the display.
➮ Remove the first KeyCard.
➮ Insert the new KeyCard.
“LEARN OK” appears in the display.
To leave the menu
➮ Press the MENU button, 8.
The radio can now be operated with the new
KeyCard.
Note:
Two KeyCards is the maximum that can be
used with one device.
If you already have two KeyCards for the device and then “train” a third KeyCard, the device can no longer be used with the KeyCard
that was not involved in the training process.
KeyCard lost or damaged
If all the KeyCards belonging to a device are
damaged or lost, you can “train” a new KeyCard.
You can obtain a new KeyCard from your
dealer.
In order to be able to use the new KeyCard
you will require the device’s master code. You
will find this in the device’s Car Radio Passport. The instructions for this are in the section on “Training a new KeyCard”.
Keep your Car Radio Passport in a
safe place, but never in the car itself.
Training a new KeyCard / entering
the master code
If you no longer have a valid KeyCard for your
device, and would like to train a new KeyCard
➮ insert the new, unknown KeyCard into
the device.
36
➮ Close the control unit.
➮ If necessary, switch the device off.
➮ Hold down the TUNE and ST1 buttons,
> and 4, at the same time.
➮ Switch the device on with the main button, 2.
“0000” appears in the display.
Enter the four-figure master code from the Car
Radio Passport as follows:
➮ Enter each of the numbers for the master code using the and buttons,
7.
Press this button as many times as is
necessary to obtain the desired number
in the display.
➮ Change the location of your input with
the
and
buttons, 7.
➮ When the master code is correctly
shown, press the OK button, 5.
If the device switches to play, the new KeyCard has been accepted.
Visual theft protection (LED)
When the device is switched off and the KeyCard has been removed, the power button
and the CD slot illumination can flash if desired. This requires the “LED” setting in the
menu to be set to “ON”.
➮ Press the MENU button, 8.
➮ Press the or button, 7, until either
“LED ON” or “LED OFF” appears in the
display.
or button, 7, in order to
switch between the settings ON and
OFF.
➮ Press the
➮ Press the OK button, 5, or the MENU
button, 8, to leave the menu. The settings are then saved.
➮ Press the
button, 7.
The device switches on.
➮ To switch off, hold the main button, 2,
The Radio Passport data is shown on the display as moving text.
To leave the menu
pressed for longer than two seconds.
The device switches off.
➮ Press the OK button, 5, or the MENU
Switching on and off with the
vehicle ignition
button, 8, to leave the menu. The settings are then saved.
Care of the KeyCard
The KeyCard can only function properly if the
contacts are free from foreign particles. Avoid
touching the contacts with your skin.
If necessary, clean the KeyCard contacts using a lint-free cloth dipped in alcohol.
If the device is correctly connected to the vehicle ignition, and has not been switched off
with the main button, 2, it is switched on and
off along with the ignition.
You can also switch the device on when the
ignition is off.
➮ Press the main button, 2.
Note:
In order to protect the vehicle battery, the
device is automatically switched off after an
hour if the vehicle ignition is off.
Switching on and off with the
KeyCard
You can also switch the device on and off by
inserting and removing the KeyCard, if the
device was not previously switched off with
the main button, 2. Read the chapter on
“KeyCard theft protection” for information
about inserting and removing the KeyCard.
37
ENGLISH
➮ Press the main button, 2, to switch on.
FRANÇAIS
“LEARN KC” appears in the display.
Switching on and off with the
button 2
ITALIANO
➮ Press the MENU button, 8.
➮ Press the or button, 7, until
NEDERLANDS
There are a number of methods for switching
the device on or off.
SVENSKA
Switching on and off
Using the supplied KeyCard you can show
the Radio Passport data such as the device
name, type number (7 6 ...) and the device
number in the display.
ESPAÑOL
Display Radio Passport Data
DEUTSCH
SWITCHING ON AND OFF
PORTUGUÊS
THEFT PROTECTION
VOLUME
Adjusting the volume
Muting
The volume can be adjusted in steps from 0
(off) to 66 (maximum).
You can reduce the level of the volume (mute)
suddenly.
➮ Press the main button, 2.
“MUTE” is shown on the display.
➮ To increase the volume, turn the volume
control to the right.
➮ To reduce the volume, turn the volume
control to the left.
Cancelling the mute
➮ Press the main button, 2.
Adjusting the switch-on volume
or
The volume level of the device when it is
switched on can be adjusted.
➮ Turn the volume control, 3.
➮ Press the MENU button, 8.
➮ Press the button, 7, as often as is
necessary for “ON VOL” to appear in the
display.
➮ Adjust the switch-on volume with the
buttons, 7, or with the volume
control.
If you set a volume level below “1”, “LAST
VOL” will appear in the display. This means
that whatever volume was in use before the
device was switched off will be activated again
when the device is switched on.
Risk of serious injury!
If the level of switch-on volume is set to
maximum, the volume when switching on
can be very high.
If the volume was set to maximum
before switching off, and the value for the
switch-on volume is set to “LAST VOL”, the
volume when switching on can be very
high.
Either case can result in serious injury to
hearing!
➮ Press the OK button, 5, or the MENU
button, 8, to leave the menu. The settings are then saved.
38
Muting during telephone
operation
If your car radio is connected to a mobile telephone, the radio is muted when the telephone is taken “off the hook”. This requires
the mobile telephone to be connected to the
car radio as described in the fitting instructions.
If, in the course of a telephone call, a traffic
announcement is made, and if traffic announcements have been given priority, the
traffic announcement will be played. For more
information, read the section on “Traffic Information”.
Adjusting the volume for the
confirmation tone (beep)
With certain functions, if you hold a button
pressed for longer than two seconds, for instance in order to save a station frequency to
a station button, a confirmation tone, or beep,
is generated. The volume level of the beep
can be adjusted.
➮ Press the MENU button, 8.
➮ Press the button, 7, as often as is
necessary for “BEEP” to appear in the
display.
➮ Adjust the volume with the
buttons,
7, or with the volume control. “0”
means that the beep is off, while “9” is
the maximum beep volume.
➮ Press the OK button, 5, or the MENU
button, 8, to leave the menu. The settings are then saved.
Adjusting the left/right volume
balance
Note:
You can make separate adjustments to the
bass, treble and loudness for each audio
source.
➮ In order to adjust the balance, press the
➮ Press the AUD button, 9.
“BASS” appears in the display.
or button, 7, as often
as is necessary for “TREBLE” to appear
in the display.
➮ Press the
or buttons, 7, in order
to adjust the treble.
When you have finished the adjustment
➮ Press the AUD button, 9.
➮ Press the
Loudness
Loudness refers to a bass boost at low volume levels matching the ear’s sensitivity.
➮ Press the AUD button, 9.
“BASS” appears in the display.
or button, 7, as often
as is necessary for “LOUD” to appear in
the display.
➮ Press the
or buttons, 7, in order
to adjust the loudness. “LOUD OFF”
means that the loudness function is inactive, while “LOUD 6” indicates the
maximum loudness boost.
When you have finished the adjustment
➮ Press the AUD button, 9.
➮ Press the
FRANÇAIS
ITALIANO
Adjusting the treble
Adjusting the front/rear volume
ratio (fader)
➮ In order to adjust the fader, press the
AUD button, 9.
“BASS” appears in the display.
or button, 7, as often
as is necessary for “FADER” to appear
in the display.
➮ Press the
or buttons, 7, in order
to adjust the balance between front and
rear.
When you have finished the adjustment
➮ Press the AUD button, 9.
➮ Press the
TA-SOUND
You can make separate adjustments to the
tone and volume for traffic announcements.
NEDERLANDS
or buttons, 7, in order
to adjust the bass.
When you have finished the adjustment
➮ Press the AUD button, 9.
➮ Press the
or buttons, 7, in order
to adjust the balance between left and
right.
When you have finished the adjustment
➮ Press the AUD button, 9.
➮ Press the
SVENSKA
“BASS” appears in the display.
ESPAÑOL
➮ Press the AUD button, 9.
or button, 7, as often
as is necessary for “BAL” to appear in
the display.
➮ Press the
PORTUGUÊS
Adjusting the bass
AUD button, 9.
“BASS” appears in the display.
ENGLISH
Tone and volume
DEUTSCH
TONE AND VOLUME
➮ Hold down the softkey, 4, indicating
“TA” for longer than two seconds.
“TA-SOUND” appears in the display.
or button, 7, as often
as is necessary for the desired parameter to appear in the display.
➮ Press the
➮ Perform the adjustments using the
or key, 7.
When you have finished the adjustment
➮ Press the AUD button, 9.
39
DISPLAY
Adjusting the display
Night-time display brightness
You can adjust the display to its location in
your vehicle and to your taste.
➮ Press the MENU button, 8.
➮ Press the or button, 7, as often
as is necessary for “DIM NGHT” to appear in the display.
Adjusting the viewing angle
➮ Press the MENU button, 8.
➮ Press the or button, 7, as often
as is necessary for “ANGLE” to appear
in the display.
➮ Adjust the viewing angle with the
key, 7.
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
Adjusting the display brightness
If your car radio has been connected as described in the fitting instructions, the display
brightness will switch with the headlights. The
display brightness can be set at separate levels for day and night in steps from 1 to 9.
Daytime display brightness
➮ Press the MENU button, 8.
➮ Press the or button, 7, as often
as is necessary for “DIM DAY” to appear
in the display.
➮ Adjust the brightness with the
key,
7.
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
40
➮ Adjust the brightness with the
key,
7.
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
radio is operating.
The radio function menu is shown on the display.
➮ press the TUNE button, >, or wait for
The RDS convenience functions AF (alternative frequency) and REG (regional) extend the
capabilities of your radio (only in FM radio
operation).
●
AF: If the RDS convenience function
has been activated, the device searches
automatically in the background for the
best frequency on which the set station
can be received.
●
REG: Some stations divide their programs at certain times into regional programs with different content. The REG
function prevents the car radio from
switching to alternative frequencies that
have a different regional program content.
eight seconds. The settings are then
saved.
Switching REG on and off
In order to use the RDS convenience function REG
➮ press the TUNE button, >, when the
radio is operating.
The radio function menu is shown on the display.
➮ Press the softkey, 4, indicating “REG”.
“REG ON” or “REG OFF” is displayed briefly
when the REG function is switched on or off.
To return to the basic radio menu
➮ press the TUNE button, >, or wait for
eight seconds. The settings are then
saved.
PORTUGUÊS
RDS convenience function (AF,
REG)
ITALIANO
➮ Press the TUNE button, >.
NEDERLANDS
If the radio is in one of the other operating
modes
FRANÇAIS
➮ Press the softkey, 4, indicating “RDS”.
The RDS convenience functions are active if
“RDS” is displayed with light and shade reversed. “REG ON” or “REG OFF” is displayed
briefly when the RDS convenience functions
are switched on or off.
To return to the basic radio menu
Switching on radio operation
ENGLISH
➮ press the TUNE button, >, when the
SVENSKA
This device is equipped with an RDS radio
receiver. Many of the FM stations that can be
received transmit a signal in addition to the
program itself that contains information such
as the name of the station and the type of
program (PTY).
As soon as it can be received, the name of
the station is shown in the display . If desired,
the program type can be displayed.
You may read more about this in the section
on “Program Type (PTY)”.
Switching the RDS convenience function
on and off
In order to use the RDS convenience functions AF and REG
ESPAÑOL
Radio Operation
DEUTSCH
RADIO OPERATION
Note:
REG must be separately activated or deactivated in the radio function menu.
41
RADIO OPERATION
Select waveband/memory level
Manual station tuning
This radio receives stations in the VHF (FM)
waveband as well as MW and LW (AM) stations. Three memory levels are available for
the FM waveband, and one memory level is
available for each of the MW and LW bands.
Six stations can be stored on each memory
level.
You can also tune to the station manually.
➮ Press the
or
button, 7.
Note:
Manual station tuning is only possible if the
RDS convenience function is deactivated.
Selecting the FM memory level
In order to switch between the FM memory
levels
Browsing a chain of stations (FM only)
If a station is providing several programs it is
possible to browse through this “chain” of stations.
➮ press the softkey, 4, indicating “NEXT”
➮ Press the
as often as necessary for the desired
memory level to be shown in the display.
The memory levels are called up in the sequence FM I, FM II and FMT.
Selecting the waveband
In order to select one of the FM, MW or LW
bands
➮ press the TUNE button, >, when the
radio is operating.
The radio function menu is shown on the display.
➮ Press the softkey, 4, indicating “BND”
as often as necessary for the desired
waveband to be shown in the display.
To return to the basic radio menu
➮ Press the TUNE button, >, or wait for
eight seconds. The settings are then
saved.
Setting the station
There are a number of ways to set the station.
Automatic station search
➮ Press the
or
button, 7.
The next station that can be received is tuned
in.
42
or button, 7, in order to
change to the next link in the station
chain.
Note:
In order to use this function, the RDS convenience function must be active.
You can only change in this way to a station
that you have already received once. To do
this, use the Scan or Travelstore functions.
Adjusting the sensitivity of the
station search
You can choose whether to search only for
stations with strong signals, or whether weak
stations should be included.
➮ Press the MENU button, 8.
➮ Press the or button, 7, as often
as is necessary for “FM-SENS” to appear in the display.
The current value of the sensitivity is shown
on the display. “SENS 6” indicates the maximum sensitivity for the reception of distant
transmitters, and “SENS 1” indicates the lowest sensitivity.
➮ Adjust the desired sensitivity with the
key, 7.
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
Scanning through stations
Saving a station manually
Scanning through available stations
(radio SCAN)
Saving a station automatically
(Travelstore)
You can also save the six strongest stations
in the area automatically (FM only).
This is done in the FMT memory level.
Note:
Any stations previously saved on this level will
be deleted.
In order to use the Travelstore function
➮ press the TUNE button, >, when the
radio is operating.
The radio function menu is shown on the display.
➮ Press the softkey, 4, indicating “TS”.
To start the radio scan
➮ press the TUNE button, >, when the
radio is operating.
The radio function menu is shown on the display.
➮ Press the softkey, 4, indicating “SCA”.
The scanning process starts. “SCAN” is
shown on the display for a short time, after
which the current station name or the frequency is displayed, flashing.
Scanning through the preset stations
You can listen to short samples from all the
stations saved on the various memory levels
that can currently be received. The length of
the samples can be set, in the menu, to between 5 and 30 seconds.
Starting preset SCAN
To start the preset scan
Storing starts. “T-STORE” appears in the display. When the procedure is complete, the
station in memory location one on the FMT
level is played.
➮ press the TUNE button, >, when the
Going to a preset station
➮ Hold down the softkey, 4, indicating
➮ Select the memory level or waveband.
➮ Press the softkey, 4, indicating from
“SCA” for longer than one second.
The scanning process starts. “SCAN” is
shown on the display for a short time. The
memory levels are scanned one after another, and the memory location from “ST1” to
“ST6” currently being sampled is displayed
with light and shade reversed.
“ST1” to “ST6” for the desired station.
radio is operating.
The radio function menu is shown on the display.
43
FRANÇAIS
the station “ST1” - “ST6” in which the
station is to be stored for longer than
two seconds.
Starting radio SCAN
ITALIANO
➮ Hold down the softkey, 4, indicating
NEDERLANDS
under “Setting the station”.
SVENSKA
➮ Tune in the desired station as described
You can listen to short samples from all the
stations that can currently be received. The
length of the samples can be set, in the menu,
at between 5 and 30 seconds.
ESPAÑOL
FM I, FM II, FMT or one of the other
wavebands, MW or LW.
PORTUGUÊS
➮ Choose the desired memory level from
ENGLISH
Saving a station
DEUTSCH
RADIO OPERATION
RADIO OPERATION
Stopping the SCAN, continue listening to
a station
➮ Press the softkey, 4, indicating “SCA”
again.
The scanning process is stopped, and the last
station sampled remains active.
Adjusting the sample duration
(Scantime)
➮ Press the MENU button, 8.
➮ Press the or button, 7, as often
as is necessary for “SCANTIME” to appear in the display.
➮ Adjust the desired sampling time with
the <
key, 7.
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
Note:
The sampling duration that is selected is also
applied to the scanning in CD, tape cassette,
MiniDisc and CD changer operation (depending on how the radio is equipped).
Program type (PTY)
As well as the station name itself, some FM
stations also supply information about the type
of program being transmitted. This information can be received and displayed by your
radio.
Examples of these program types could be:
CULTURE
TRAVEL
JAZZ
SPORT
NEWS
POP
ROCK
CLASSICS
Using the PTY function it is possible to specifically select stations transmitting a particular program type.
If you have started a PTY search, but no
matching station is found, the search will be
continued in the background.
44
As soon as a station of the selected type is
found, the device changes over from the
present station, or out of CD, cassette tape,
MiniDisc or CD changer operation (depending on how the radio is equipped) to the station with the selected program type.
Switching PTY on and off
In order to use the PTY function
➮ press the TUNE button, >, when the
radio is operating.
The radio function menu is shown on the display.
➮ Press the softkey, 4, indicating “PTY”.
When PTY is switched on, the display briefly
shows the last program type that was selected. PTY appears in the display.
To return to the basic radio menu
➮ press the TUNE button, >, or wait for
eight seconds. The settings are then
saved.
Selecting the program type and starting
the search
➮ Press the
or
button, 7.
The current program type is shown on the
display.
If you want to change to a different program
type
or button, 7, as often as
necessary, until the desired program
type is displayed.
➮ press the
Or
➮ In order to select a saved program type,
press one of the softkeys, 4, indicating
“ST1” to “ST6”.
The selected program type is briefly displayed.
In order to start the search
➮ press the
or
button, 7.
The next receivable station with the selected
program type is tuned in.
Setting the PTY language
You can select the language in which program
types are displayed.
➮ Press the MENU button, 8.
➮ Press the or button, 7, as often
as is necessary for “PTY LANG” to appear in the display.
or button, 7, in order to
switch between the languages “DEUTSCH”, “ENGLISH” or “FRANCAIS”.
➮ Press the
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
Optimising radio reception
Treble cut in the presence of interference
(HICUT)
The HICUT function improves the sound
when radio reception is poor.
When interference is being received, the treble is automatically cut, which therefore also
reduces the level of interference.
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
Bandwidth selection in the presence of
interference (SHARX)
The SHARX function provides you with the
facility of eliminating interference from neighbouring stations as far as possible. Switch on
the SHARX function when stations are crowded.
ENGLISH
FRANÇAIS
down one of the softkeys, 4, indicating
“ST1” to “ST6”, for more than one second.
The program type is saved at the chosen location.
ITALIANO
➮ In order to save a program type, hold
or buttons, 7, in order
to adjust the HICUT.
“NO HICUT” means that the function is inactive, while “HICUT 3” indicates the strongest
automatic reduction of the treble and the interference.
➮ Press the
NEDERLANDS
or
button, 7.
as is necessary for “HICUT” to appear in
the display.
Switching SHARX on and off
➮ Press the MENU button, 8.
➮ Press the or button, 7, as often
as is necessary for “SHARX” to appear
in the display.
or buttons, 7, in order
to switch SHARX on or off.
“NO SHARX” means that the function is not
active, while “SHARX ON” means that the
bandwidth selection is operating automatically.
➮ Press the
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
45
SVENSKA
➮ Select a program type with the
➮ Press the MENU button, 8.
➮ Press the or button, 7, as often
ESPAÑOL
Storing the program type on the station
button
Adjusting HICUT
PORTUGUÊS
Note:
If no station is found with the chosen program
type, a beep is sounded, and the display briefly shows “NO PTY”. The tuner returns to the
most recently received station.
DEUTSCH
RADIO OPERATION
RADIO OPERATION
Switching between stereo and
mono
When radio reception is poor you can switch
the mode to mono. The changeover from stereo to mono is executed smoothly. The radio
plays in stereo after being switched on. The
selection of stereo or mono is made via the
menu.
➮ Press the MENU button, 8.
➮ Press the or button, 7, as often
as is necessary for “STEREO” or
“MONO” to appear in the display.
or button, 7, to choose
between stereo and mono.
➮ Press the
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
Changing the displayed
information
You can select the information shown on the
display.
The upper display line (the headline) can display the station name, frequency or the program type. The lower display line (DOT field)
can display the time or the memory level.
Changing the headline
➮ Hold down the DIS button, :, until the
desired information, i.e. the station
name, frequency or program type, appears.
Changing the DOT field
➮ Hold down the DIS button, :, for longer than one second.
The display switches between time and memory level.
46
TRAFFIC INFORMATION
Traffic Information
You car radio is equipped with an RDS-EON
receiver.
EON (Enhanced Other Network) stands for
the broadcasting of station information within
a broadcasting network.
If a traffic announcement (TA) is made, your
radio will tune automatically from a non-traffic-information station to a traffic-information
station with the broadcasting network.
The radio then reverts to the programme previously heard once the traffic announcement
is over.
Switching traffic information
priority on and off
➮ Press the softkey, 4, indicating “TA”.
Traffic announcement priority is activated if
“TA” appears with light and shade reversed.
Note:
You will hear a warning tone
●
if you leave the reception area of a traffic radio station to which you are listening,
●
if, when you are listening to a CD, tape
cassette or MiniDisc (according to how
the radio is equipped) the reception
area of the selected traffic radio station,
and the automatic search which then
follows fails to find a new traffic radio
station,
●
if you change from a traffic radio station
to a station with no traffic information.
Either switch off the traffic information priority
or change over to a station with traffic information.
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
There is a risk of damaging the CD
drive!
Neither CD singles with a diameter of 8
cm nor non-circular “shape” CDs may be
used.
No responsibility can be accepted for damage to the CD drive through the use of unsuitable CDs.
Starting CD operation and
inserting the CD
●
If there is no CD in the drive
➮ press the
DEUTSCH
ENGLISH
FRANÇAIS
buttons,
7, or with the volume control.
ITALIANO
➮ Adjust the volume with the
NEDERLANDS
VOLUME” appears in the display.
You can play 12 cm-diameter commercial
CDs on this device.
So-called CD-Rs (“home-made” CDs) can
also usually be played. However, because of
the varying CD quality, Blaupunkt cannot
guarantee correct function.
Rewritable CDs (CD-RWs) cannot be played!
button, 1.
The control unit opens.
➮ Insert the CD with the printed side upwards gently into the drive until you can
feel some resistance.
The CD is automatically drawn into the drive.
As the CD is drawn in it must neither be held
back nor supported.
➮ Close the control unit with gentle pressure until you feel it latch.
The CD menu is displayed, and the CD starts
playing.
●
If there is already a CD in the drive
➮ press the CD button, <.
The CD menu is displayed, and play begins
from the point where it was last interrupted.
47
SVENSKA
➮ Press the MENU button, 8.
➮ Press the or button, 7, until “TA
CD operation
ESPAÑOL
Adjusting the volume for traffic
announcements
CD OPERATION
PORTUGUÊS
TRAFFIC INFORMATION
CD OPERATION
Removing the CD
➮ Press the
button, 1.
The control unit opens to the front.
➮ Press the
button on the opened control unit.
The CD is ejected.
➮ Carefully remove the CD.
Note:
If you do not remove the CD within 30 seconds it will be drawn back into the drive.
Selecting a track
➮ Press one of the buttons in the arrow
button group, 7, as often as needed
for the number of the desired track to
appear in the display.
If the or button, 7, is pressed once the
current track will be started again.
Scanning tracks (SCAN)
You can hear a brief sample from all the tracks
on the CD.
➮ Press the softkey, 4, indicating “SCA”.
“SCAN” appears in the display. The tracks on
the CD are played in ascending order.
Note:
The duration of the samples can be adjusted.
For information on setting the sampling duration, read the paragraphs on “Adjusting the
Sample Duration” in the “Radio Operation”
section.
Stopping the SCAN to continue listening
to a track
➮ Press the softkey, 4, indicating “SCA”
again.
The track that is currently being sampled will
continue to be played.
Fast searching (audible)
Repeating tracks (REPEAT)
In order to search rapidly backwards or forwards
➮ Press the softkey, 4, indicating “RPT”.
➮ hold down one of the
, or buttons, 7, until the fast search backwards of forwards starts.
Random Track Replay (MIX)
➮ Press the softkey, 4, indicating “MIX”.
“MIX CD” appears briefly on the display. The
next track to be played will be selected at random.
Ending MIX
➮ Press the softkey, 4, indicating “MIX”
again.
“MIX OFF” appears briefly on the display.
The title will be repeated until RPT is deactivated.
Stopping REPEAT
➮ Press the softkey, 4, indicating “RPT”
again.
Play continues as normal.
Changing the display contents
You can choose between different display
modes during CD operation:
●
Display of track number and time.
●
Display of track number and play time.
●
Display of CD name and track number.
➮ In order to change between the display
modes, press the DIS button, :, as often as you need for the desired information to be shown on the display.
48
Note:
It is only possible for a CD name to be displayed if the inserted CD has been provided
with a name. Read the section on “Naming
CDs”.
Switching favourite track play on and off
Traffic announcements with CD
operation
“TPM”.
The current TPM status (“TPM ON” or “TPM
OFF”) is briefly displayed.
If favourite track play is active, “TPM” appears
on the display with light and shade reversed.
Programming favourite tracks
Proceed as follows to program your favourite
tracks on a CD:
➮ Insert the CD for which you want to program your favourite tracks into the CD
drive.
➮ Select your first favourite track.
➮ Hold down the softkey, 4, indicating
“TPM” for longer than one second.
The track is accepted into the list of favourite
tracks for this CD.
➮ Continue in the same way for all the other favourite tracks on the CD.
ENGLISH
FRANÇAIS
ITALIANO
➮ switch TPM on.
➮ Select the title that is to be deleted.
➮ Hold down the softkey, 4, indicating
“CLR” for about two seconds.
“TRCK CLR” appears briefly on the display,
and the track has been removed from the programmed list.
NEDERLANDS
You can use the TPM function (Track Program
Memory) to program, save and replay your
favourite tracks from a particular CD. You can
program the tracks in any order, but they will
be played in ascending order. If favourite track
play is active, only the tracks previously programmed will be played from the CD that is
in the drive. Up to 30 CDs with a maximum of
40 tracks on each can be handled.
In order to remove individual entries from the
programmed list of favourite tracks on a CD
Delete the list of favourite tracks for a CD
You can delete the whole list of favourite tracks
for a CD. The CD whose list of favourite tracks
is to be deleted must be inserted.
➮ switch TPM on.
➮ Hold down the softkey, 4, indicating
“CLR” for about five seconds.
“CD CLR” appears briefly on the display, and
programming has been cleared.
Clearing all the lists of favourite titles
from the device
You can delete all the programmed lists of
favourite tracks for all CDs.
A CD for which favourite tracks are programmed must be inserted.
➮ Switch TPM on.
➮ Hold down the softkey, 4, indicating
“CLR” for about eight seconds.
“ALL CLR” appears briefly on the display, and
all programmed lists have been cleared.
49
SVENSKA
Programming favourite CD tracks
Deleting titles from the list
ESPAÑOL
ments during CD operation, press the
softkey, 4, indicating “TA”.
Traffic announcement priority is activated if
TA appears with light and shade reversed. For
more information, read the section on “Traffic
Information”.
➮ briefly press the softkey, 4, indicating
PORTUGUÊS
➮ If you wish to receive traffic announce-
In order to begin playing the programmed favourite tracks on the inserted CD, or to stop
playing only the favourite tracks
DEUTSCH
CD OPERATION
CD OPERATION
➮ Press the OK button, 5 or the MENU
Naming CDs
In order to recognise your CDs more effectively, the car radio allows you to give individual names to up to 30 CDs. The names may
have a maximum of eight characters.
If you attempt to assign more than 30 names,
the display will show “FULL”.
Entering and changing CD names
➮ Listen to the CD that you want to name.
➮ Press the MENU button, 8.
➮ Use the / buttons, 7, to select
“CD NAME”.
➮ Press the
or
button, 7.
The device enters edit mode. If your chosen
CD is not yet named, eight underscores appear in the display.
The current entry location blinks.
/ buttons, 7, to select
your character. If a location is to remain
empty, select the underscore.
➮ Use the
or button, 7, to change
the input location.
➮ Use the
➮ To save the name, press the MENU button, 8.
Deleting a CD name
➮ Listen to the CD whose name is to be
deleted.
➮ Press the MENU button, 8.
➮ Use the / buttons, 7, to select
“UPDATE”.
➮ Press the
button, 7.
“CLR DISC” appears in the display.
➮ Hold down the OK button, 5. After four
seconds a beep is heard, and “DELETING” appears on the display.
➮ Release the OK button, 5.
The CD name has been deleted.
50
button, 8, to leave the menu. The settings are then saved.
Deleting all CD names
➮ Listen to a CD.
➮ Press the MENU button, 8.
➮ Use the / buttons, 7, to select
“UPDATE”.
➮ Press the
button, 7.
“CLR ALL” appears in the display.
➮ Hold down the OK button, 5. After four
seconds a beep is heard, and “DELETING” appears on the display.
➮ Release the OK button 5.
All CD names have been cleared.
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
The CD changer menu is displayed, and play
will continue from the point where it was last
interrupted. If the magazine is removed from
the CD changer and re-inserted, play will start
with the first track on the first CD detected by
the CD changer.
Note:
It is only possible for a CD name to be displayed if the inserted CD has been provided
with a name. Read the section on “Naming
CDs”.
Repeat play of individual tracks or
whole CDs (REPEAT)
Selecting a CD
➮ Press the softkey, 4, indicating “RPT”.
➮ In order to change up or down to anoth-
“RPT TRCK” appears briefly on the display.
er CD, press the or button, 7, until
the number of the CD you want appears
on the display.
Selecting a track
➮ In order to change up or down to another track on the current CD, press the
or button, 7, until the number of the
track you want appears on the display.
If the button, 7, is pressed once the current track is started again.
Fast searching (audible)
In order to search rapidly backwards or forwards
➮ hold down one of the
or buttons,
7, until the fast search backwards of
forwards starts.
➮ In order to repeat play of the whole CD,
press the softkey, 4, indicating “RPT”
again.
“RPT DISC” appears briefly on the display.
Stopping REPEAT
In order to stop repeating either the current
track or the current CD
ENGLISH
FRANÇAIS
ITALIANO
➮ Press the CDC button, =.
modes, press the DIS button, :, as often as you need for the desired information to be shown on the display.
NEDERLANDS
Starting CD changer operation
➮ In order to change between the display
SVENSKA
Note:
The operating instructions for your CD changer will provide information about handling
CDs, inserting them and operating the CD
changer.
You can choose between different display
modes during CD changer operation:
●
Display of CD number, track number
and time.
●
Display of CD number, track number
and playing time.
●
Display of CD name and track number.
ESPAÑOL
On page 34 of this guide you can find which
CD changers can be used with this device.
You can also refer to your Blaupunkt dealer.
Changing the display contents
➮ press the softkey, 4, indicating “RPT” as
often as necessary for the “RPT OFF” to
be shown in the display.
Playing tracks in random
sequence (MIX)
In order to play the tracks on the current CD
in a random sequence
➮ Press the softkey, 4, indicating “MIX”.
“MIX CD” appears briefly on the display.
51
PORTUGUÊS
CD changer operation
(optional)
DEUTSCH
CD CHANGER OPERATION
CD CHANGER OPERATION
In order to play the tracks on all the inserted
CDs in a random sequence
➮ Press the softkey, 4, indicating “MIX”
again.
“MIX MAG” appears briefly on the display.
Note:
The CDC A 08 and the IDC A 09 will make
random selections from all the CDs and all
the tracks in the changer. All other changers
will first play through all the tracks of one CD
at random before moving on to the next CD
in the changer.
Ending MIX
➮ Press the softkey, 4, indicating “MIX”
as often as necessary for “MIX OFF” to
be shown in the display.
Sampling all tracks on all CDs
(SCAN)
Naming CDs
In order to recognise your CDs more effectively, the car radio allows you to give individual names to up to 99 CDs. The names may
have a maximum of seven characters.
If you attempt to assign more than 99 names,
the display will show “FULL”.
Entering and changing CD names
➮ Press the MENU button, 8.
➮ Use the / buttons, 7, to select
“CDC NAME”.
➮ Press the
or
button, 7.
The device is now in selection mode.
➮ Choose the CD that you want to name
with the
➮ Press the
buttons, 7.
/
or
button, 7.
In order to hear a short sample of all the tracks
on all the inserted CDs in ascending order
The device enters edit mode. If your chosen
CD is not yet named, seven underscores appear in the display.
The current entry location blinks.
➮ press the softkey, 4, indicating “SCA”.
➮ Use the
“SCAN” appears in the display.
/ buttons, 7, to select
your characters. If a location is to remain empty, select the underscore.
Ending SCAN
In order to stop sampling the tracks
➮ Use the
➮ press the softkey, 4, indicating “SCA”
➮ Press the OK button, 5 or the MENU
again.
The track that is currently being sampled will
continue to be played.
Note:
The duration of the samples can be adjusted.
For information on setting the sampling duration, read the paragraphs on “Adjusting the
Sample Duration” in the “Radio Operation”
section.
or button, 7, to change
the input location.
button, 8, to leave the menu. The settings are then saved.
Deleting a CD name
➮ Listen to the CD whose name is to be
deleted.
➮ Press the MENU button, 8.
➮ Use the / buttons, 7, to select
“UPDATE”.
➮ Press the
button, 7.
“CD CLR” appears briefly on the display, after which the CD name is shown.
52
➮ Listen to a CD in CD changer mode.
➮ Press the MENU button, 8.
➮ Use the / buttons, 7, to select
Switching favourite track play on and off
In order to begin playing the programmed favourite tracks on the inserted CD, or to stop
playing only the favourite tracks
➮ briefly press the softkey, 4, indicating
“UPDATE”.
➮ Press the
er favourite tracks on the CD.
button, 7.
“CLR ALL” appears in the display.
➮ Hold down the OK button, 5.
After four seconds “DELETING” appears on
the display.
➮ Release the OK button, 5.
All CD names have been cleared.
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
Programming favourite CD tracks
You can use the TPM function (Track Program
Memory) to program, save and replay your
favourite tracks from a particular CD. You can
program the tracks in any order, but they will
be played in ascending order. If favourite track
play is active, only the tracks previously programmed will be played from the current CD.
Up to 30 CDs with a maximum of 40 tracks
on each can be handled.
Programming favourite tracks
Proceed as follows to program your favourite
tracks on a CD:
➮ Select the CD for which you want to program your favourite tracks in CD changer operation.
“TPM”.
The current TPM status (“TPM ON” or “TPM
OFF”) is briefly displayed.
If favourite track play is active, “TPM” appears
on the display with light and shade reversed.
Deleting titles from the list
In order to remove individual entries from the
programmed list of favourite tracks on a CD
➮ switch TPM on.
➮ Select the title that is to be deleted.
➮ Hold down the softkey, 4, indicating
“CLR” for about two seconds.
“TRCK CLR” appears briefly on the display,
and the track has been removed from the programmed list.
Deleting the list of favourite tracks for a
CD
You can delete the whole list of favourite tracks
for a CD. The CD whose list of favourite tracks
is to be deleted must be being played.
➮ Switch TPM on.
➮ Hold down the softkey, 4, indicating
“CLR” for about five seconds.
“CD CLR” appears briefly on the display, and
programming has been cleared.
53
ENGLISH
Deleting all CD names
FRANÇAIS
➮ Continue in the same way for all the oth-
ITALIANO
➮ Press the MENU button, 8, or OK, 5.
➮ Release the OK button 5.
NEDERLANDS
The CD name has been deleted.
“TPM” for longer than one second.
The track is accepted into the list of favourite
tracks for this CD.
SVENSKA
➮ Select your first favourite track.
➮ Hold down the softkey, 4, indicating
ESPAÑOL
After four seconds “DELETING” appears on
the display.
PORTUGUÊS
➮ Hold down the OK button, 5.
DEUTSCH
CD CHANGER OPERATION
CD CHANGER OPERATION
Clearing all the lists of favourite titles
from the device
You can delete all the programmed lists of
favourite tracks for all CDs.
A CD for which favourite tracks are programmed must be inserted.
➮ Switch TPM on.
➮ Hold down the softkey, 4, indicating
“CLR” for about eight seconds.
“ALL CLR” appears briefly on the display, and
all programmed lists have been cleared.
TIME
CLOCK - Time
Setting the time
The clock time can be automatically set by
means of the RDS signal. If you cannot receive an RDS station, or if the RDS station to
which you are listening does not support this
function, it is also possible to set the time
manually.
Having the time set automatically
➮ In order to have the time set automatically, press the MENU button, 8.
or button, 7, as often
as is necessary for “CLK MAN” (manual) to appear in the display.
If “CLK AUTO” is displayed, automatic time
setting is already active.
➮ Press the
button, 7, as often as is
necessary for “CLK AUTO” to appear in
the display.
➮ Press the
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
If “CLK AUTO” has been selected and a station with the RDS time function (RDS-CT) is
received, the clock is automatically adjusted.
Setting the time manually
➮ In order to adjust the time, press the
MENU button, 8.
or button, 7, as often
as is necessary for “CLOCKSET” to appear in the display.
➮ Press the
➮ Press the
or
button, 7.
The time is shown on the display. The hours
blink and can be adjusted.
➮ Adjust the hours with the
/
button,
7.
➮ When the hours have been set, press
the button, 7.
The minutes blink.
54
Selecting 12/24-hour clock mode
➮ Press the MENU button, 8.
➮ Press the or button, 7, as often
as is necessary for “24 H MODE” or “12
H MODE” to appear in the display.
or buttons, 7, to switch
between the modes.
➮ Press the
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
Having the time displayed
constantly when the device is
switched off
➮ If you want the time to be displayed
when the device is switched of and the
ignition is switched on, press the MENU
button 8.
Adjustment instructions
We recommend using a familiar CD to perform this adjustment.
Before making any adjustments to the equalizer zero the tone settings and deactivate the
loudness. For more information, read the section on “Tone and volume”.
➮ Listen to a CD, tape cassette or MiniDisc (according to how the radio is
equipped).
or button, 7, as often
as is necessary for “CLK OFF” or “CLK
ON” to appear in the display.
➮ Compare the sound you hear with how
or button, 7, to switch
between the display being ON or OFF.
➮ Now consult the “Equalizer adjustment
➮ Press the
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
DEUTSCH
you feel it should be.
guide” table for “Tone impression”.
➮ Adjust the equalizer values as described under “Action”.
PORTUGUÊS
➮ Press the
ENGLISH
button, 8, to leave the menu. The settings are then saved.
This device has a parametric digital equalizer. In this case, parametric means that in each
of the three filters, one individual frequency
can be emphasised or reduced (with a gain
of +8 to -8 dB).
The following filters are available:
● LOW EQ
32 - 200 Hz
● MID EQ
250- 1,600 Hz
● HIGH EQ
2,000 - 12,500 Hz
These filters can be set without using any
measuring instruments. It allows the sound
properties in the vehicle to be significantly
affected.
FRANÇAIS
➮ Press the OK button, 5 or the MENU
Equalizer
ITALIANO
but-
NEDERLANDS
/
ton, 7.
ESPAÑOL
➮ Adjust the minutes with the
EQUALIZER
SVENSKA
TIME
Switching the equalizer on and
off
➮ To switch off the equalizer, press the
DEQ button, 6.
“LOW EQ” is shown on the display.
➮ To switch off the equalizer, hold down
the DEQ button, 6 until “DEQ OFF”
briefly appears.
55
EQUALIZER
➮ Press the DEQ button, 6.
➮ Select “PRESET” with the or
Adjusting the equalizer
➮ Press the DEQ button, 6.
➮ Select the “LOW EQ”, “MID EQ” or
“HIGH EQ” filter with the
7.
or
button,
➮ To select the frequency, press the
or
button, 7.
➮ Adjust the level with the or key, 7.
➮ In order to select the next filter, first
press the OK button, 5, then the
button, 7.
or
➮ When you have completed all the settings, press the DEQ button, 6.
Adjusting the sharpness of the
filter
➮ Press the DEQ button, 6.
➮ Select the adjustments for the sharpness of the individual filters “LO-Q-FAC”,
“MI-Q-FAC” or “HI-Q-FAC” with the or
button, 7.
or
➮ In order to select the next filter, first
or
➮ When you have completed all the settings, press the DEQ button, 6.
Selecting the tone preset
You can choose preset tone settings for the
following musical styles.
●
ROCK
●
DISCO
●
JAZZ
●
CLASSIC
●
VOCAL
Settings for these styles have already been
programmed.
56
or
button, 7.
➮ Press the OK button, 5.
➮ When you have completed all the settings, press the DEQ button, 6.
Adjusting the level indicator
The level indicator, or spectrometer, on your
display temporarily provides a symbolic indication of the volume, the tone control settings
and the equalizer settings while you make the
adjustments.
When adjustments are not being made, the
spectrometer can be used to display the car
radio’s output level.
Switching the spectrometer on and off
➮ Press the MENU button, 8.
“MENU” appears in the display.
➮ Press the
button, 7.
press the OK button, 5, then the
button, 7.
➮ To select the preset tone, press the
or button, 7, as often
as is necessary for “PEAK ON” or
“PEAK OFF” to appear in the display.
➮ To adjust the sharpness of the filter,
press the
but-
ton, 7.
or buttons, 7, in order
to switch the spectrometer on or off.
➮ Press the
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
EQUALIZER
Reduce middle tones with
Filters: “MID EQ”, “HIGH EQ”
Frequency: 1,000 to 2,500 Hz
Level : -4 to -6 dB
Muffled tone
Lack of clarity
Instruments have no brightness
Boost treble tones with
Filter: “HIGH EQ”
Frequency: approx. 12,500 Hz
Level : +2 to +4 dB
ENGLISH
Tone lacks depth,
is aggressive, no stereo effect.
FRANÇAIS
Reduce lower middle tones with
Filters: “LOW EQ”, “MID EQ”
Frequency: 125 to 400 Hz
Level : approx. -4 dB
ITALIANO
Bass sounds muddy
Booming tone
Unpleasant pressure
NEDERLANDS
Bass boost with
Filter: “LOW EQ”
Frequency: 50 to 100 Hz
Level :+4 to +6 dB
SVENSKA
Bass too quiet
ESPAÑOL
Action
PORTUGUÊS
Tone impression/problem
DEUTSCH
Equalizer adjustment guide
57
EXTERNAL AUDIO SOURCES
External audio sources
Instead of the CD-changer, you can connect
an external audio source with line output.
Such sources might be a portable CD player,
a MiniDisc player or an MP3 player.
The AUX input must be switched on in the
menu.
You need an adapter cable to connect an external audio source. You can obtain such a
cable from your Blaupunkt dealer.
Switching the AUX input on and
off
➮ Press the MENU button, 8.
➮ Press the button, 7, as often as is
necessary for “AUX OFF” or “AUX ON”
to appear in the display.
If “AUX ON” is displayed, the input has already been switched on.
or buttons, 7, in order
to switch AUX on or off.
➮ Press the
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
Note:
If the AUX input is switched on it can be selected with the CDC button, =.
58
TMC
TMC for dynamic
navigation systems
TMC means “Traffic Message Channel”.
TMC is used to transmit traffic announcements digitally, and can therefore be used for
route planning by suitable navigation systems.
Your car radio has a TMC output that can be
connected to Blaupunkt navigation systems.
Your Blaupunkt dealer can tell you which navigation systems can be used with your car
radio.
If a navigation system is connected and a
TMC station is received, TMC will light up in
the display.
You can set a switch-on delay for connecting
a pre-amplifier via the Pre-amp Out connection. The maximum delay is four seconds.
➮ Press the MENU button, 8.
➮ Press the or button, 7, as often
as is necessary for “AMP DLAY” to appear in the display.
or buttons, 7, in order
to adjust the switch-on delay.
“DLAY OFF” means that there is no switchon delay, while “DELAY 1” to “DELAY 4” indicate the delay time in seconds.
➮ Press the
DEUTSCH
Amplifier
Output power:
4 x 25 Watt sine wave
according to
DIN 45 324 at 14. 4 V
4 x 45 Watt max. power
Tuner
Wavebands:
VHF (FM) :
MW
:
LW
:
FRANÇAIS
Switch-on delay for external preamplifiers
Technical data
87.5 – 108 MHz
531 – 1,602 kHz
153 – 279 kHz
ITALIANO
You can use the connections provided on your
car radio to connect an external pre-amplifier
and a subwoofer.
We recommend that you use matching products from the Blaupunkt or Velocity ranges.
FM frequency response:
30 - 15,000 Hz
CD
NEDERLANDS
Pre-amplifier / subout
TECHNICAL DATA
Frequency response:
20 - 20,000 Hz
➮ Press the OK button, 5 or the MENU
4 channels:
SVENSKA
Pre-amp Out
4 V
AUX input
1,2 V / 10 kΩ
ESPAÑOL
Sensitivity:
PORTUGUÊS
button, 8, to leave the menu. The settings are then saved.
ENGLISH
PRE-AMPLIFIER / SUBOUT
Subject to technical change!
59
Download PDF

advertising