Operating instructions | BMW 01 41 0 155 307 Automobile User Manual

All about the
Use & Care
of your
Wall Oven
TA B L E O F C O N T E N T S
Self-Cleaning........................................................22
Important Safety Instructions..................................3
Care & Cleaning...................................................24
Features at a Glance...............................................5
Before You Call ...................................................26
Before Setting Oven Controls..................................6
Major Appliance Warranty.....................................28
Setting Oven Controls.............................................9
www.frigidaire.com USA 1-800-944-9044
www.frigidaire.ca Canada 1-800-265-8352
318205303 (January 2009) Rev. A
Welcome & Congratulations....................................2
Welcome & Congratulations
Product Registration
Register Your Product
The PRODUCT
REGISTRATION CARD
should be filled in completely,
signed and returned to
Electrolux Home Products.
Serial Plate Location
Congratulations on your purchase of a new appliance! At
Electrolux Home Products, we are very proud of our
product and are completely committed to providing you
with the best service possible. Your satisfaction is our
number one priority.
We know you’ll enjoy your new appliance and Thank You
for choosing our product. We hope you consider us for
future purchases.
Please CAREFULLY read and save these
instructions
This Use & Care Manual contains general operating
instructions for your appliance and feature information
for several models. Your product may not have all
the described features. The graphics shown are
representative. The graphics on your appliance may not
look exactly like those shown. These instructions are not
meant to cover every possible condition and situation
that may occur. Common sense and caution must be
practiced when installing, operating and maintaining any
appliance.
 NOTE
Please attach sales receipt here for future reference.
Versión en español
Si desea obtener una copia en español de este Manual
del Usuario, sírvase escribir a la dirección que se
incluye a continuación. Solicite la P/N 318203624E.
Please record your model and serial numbers
below for future reference.
Model Number:
Serial Number:
Purchase Date:
© 2009 Electrolux Canada Corp.
All rights reserved
Printed in United States
2
Spanish Use & Care Manual
Electrolux Home Products
P. O. Box 212378
Augusta, GA 30917
Important Safety Instructions
Read all instructions before using this appliance.
Save these instructions for future reference.
Definitions
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury
or death.
WARNING
This symbol will help alert you to situations that
may cause serious bodily harm, death or property
damage.
CAUTION
This symbol will help alert you to situations that
may cause bodily injury or property damage.
IMPORTANT
WARNING
• All appliance can tip.
•Injury to persons could result.
•Install anti-tip bracket packed with
your appliance.
•See Installation Instructions.
To reduce the risk of tipping, the
appliance must be secured by properly
installed anti-tip bracket provided
with the unit. Refer to the Installation
Instructions for proper anti-tip bracket
installation.
•User Servicing. Do not repair or replace any part
of the appliance unless specifically recommended
in the manuals. All other servicing should be done only
by a qualified technician to reduce the risk of personal
injury and damage to the appliance.
IMPORTANT indicates installation, operation or
maintenance information which is important but not
hazard-related.
•Never modify or alter the construction of an
appliance such as removal of panels, wire covers
or any other permanent part of the appliance.
•Remove all tape and packaging wrap before using
the appliance. Destroy the carton and plastic
bags after unpacking the appliance. Never allow
children to play with packaging material. Do not remove
the wiring label and other literature attached to the
appliance. Do not remove model/serial number plate.
•Storage on Appliance. Flammable materials
should not be stored near surface units. This
includes paper, plastic and cloth items, such as
cookbooks, plasticware and towels, as well as flammable
liquids. Do not store explosives, such as aerosol cans, on
or near the appliance. Flammable materials may explode
and result in fire or property damage.
•Proper Installation. Be sure your appliance is
properly installed and grounded by a qualified
technician in accordance with the National
Electrical Code No. 70 - latest edition in the
United States, or CSA C22.1, Part 1 in Canada, and
local code requirements. Install only per installation
instructions provided in the literature package for this
appliance.
Ask your dealer to recommend a qualified technician and
an authorized repair service. Know how to disconnect the
electrical power to the appliance at the circuit breaker or
fuse box in case of an emergency.
CAUTION
Electronic controllers can be damaged by cold
temperatures. When you use your appliance for
the first time, or if it has not been used for a
long period of time, make sure that it has been
exposed to a temperature above 0°C/32°F for at
least 3 hours before connecting it to the power
supply.
•Remove the oven door from any unused appliance
if it is to be stored or discarded.
WARNING
Stepping, leaning, sitting or pulling down on the
door of this appliance can result in serious injuries
and may also cause damage to the appliance. Do not
allow children to climb or play around the appliance.
•Storage in or on Appliance—Flammable materials
should not be stored in an oven. This includes paper,
plastic and cloth items, such as cookbooks, plasticware
and towels, as well as flammable liquids. Do not
store explosives, such as aerosol cans, in or near the
appliance.
WARNING
Do not use the oven for storage.
3
Important Safety Instructions
CAUTION
Do not store items of interest to children in the
cabinets above the appliance. Children climbing on
the cooktop to reach items could be seriously injured.
•Do not leave children alone. Children should not
be left alone or unattended in the area where an
appliance is in use. They should never be allowed to
sit or stand on any part of the appliance.
•DO NOT TOUCH INTERIOR OVEN ELEMENTS OR
INTERIOR SURFACES OF THE OVEN UNTIL THEY
HAVE COOLED. The oven heating elements may be hot
even though the elements are dark in color. Areas near
the elements may become hot enough to cause burns.
During and after use, do not touch, or let clothing or
other flammable materials touch these areas until they
have had sufficient time to cool. Among these areas
are the oven vent openings, the surfaces near these
openings, oven door and window.
•Wear Proper Apparel. Loose-fitting or hanging
garments should never be worn while using the
appliance. Do not let clothing or other flammable
materials contact hot surfaces.
WARNING
Never use your appliance for warming or heating
the room.
•Do Not Use Water or Flour on Grease Fires.
Smother the fire with a pan lid, or use baking
soda, a dry chemical or foam-type extinguisher.
•When heating fat or grease, watch it closely. Fat
or grease may catch fire if allowed to become too hot.
•Use Only Dry Pot holders. Moist or damp pot
holders on hot surfaces may result in burns from
steam. Do not let the pot holders touch hot surface
units. Do not use a towel or other bulky cloth instead of
a pot holder.
•Do Not Heat Unopened Food Containers. Buildup
of pressure may cause the container to burst and
result in injury.
IMPORTANT
Do not attempt to operate the appliance during a
power failure. If the power fails, always turn off
the unit. If the unit is not turned off and the power
resumes, the appliance will not operate and an error
message will be displayed.
4
IMPORTANT SAFETY INSTRUCTIONS FOR
USING YOUR OVEN
•Use Care When Opening an Oven Door—Stand to
the side of the appliance when opening the door of a hot
oven. Let hot air or steam escape before you remove or
replace food in the oven.
•Keep Oven Vent Ducts Unobstructed. The wall oven
is vented at the center trim under the control panel.
Touching the surfaces in this area when the oven is
operating may cause severe burns. Also, do not place
plastic or heat-sensitive items near the oven vent. These
items could melt or ignite. •Placement of Oven Racks. Always place oven racks in
desired location while oven is cool. Remove all utensils
from the rack before removing rack. If rack must be
moved while oven is hot, use extreme caution. Use pot
holders and grasp the rack with both hands to reposition.
Do not let pot holders contact the hot oven element or
interior of the oven.
•Do not use a broiler pan without its insert. Broiler
pan and grid allow dripping fat to drain and be kept away
from the high heat of the broiler.
• Do not cover the broiler grid or oven bottom with
aluminum foil. Exposed fat and grease could ignite.
• Do not touch a hot oven light bulb with a damp
cloth. Doing so could cause the bulb to break.
Disconnect the appliance or shut off the power to the
appliance before removing and replacing the bulb.
•Protective liners—Do not use aluminum foil to line the
oven bottom. Only use aluminum foil as recommended
in this manual. Improper installation of these liners may
result in risk of electric shock, or fire.
Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS FOR
CLEANING YOUR OVEN
•Clean the appliance regularly to keep all parts
free of grease that could catch fire. Exhaust fan
ventilation hoods and grease filters should be kept
clean. Do not allow grease to accumulate. Greasy
deposits in the fan could catch fire. Refer to the hood
manufacturer's instructions for cleaning.
•Cleaners/Aerosols—Always follow the manufacturer's
recommended directions for use. Be aware that excess
residue from cleaners and aerosols may ignite causing
damage and/or injury.
•Clean in the self-cleaning cycle only the parts of
the appliance listed in this Owner's Guide. Before
using the self-cleaning cycle of the appliance, remove all
utensils stored in the appliance.
•Do not clean the oven door gasket. The door gasket
is essential for a good seal. Care should be taken not to
rub, damage or move the gasket.
•Do not use oven cleaners. No oven cleaner or oven
liner protective coating of any kind should be used in or
around any part of the appliance.
CAUTION
The health of some birds is extremely sensitive to the
fumes given off during the self-clean cycle of any wall
oven. Move birds to another well ventilated room.
IMPORTANT SAFETY NOTICE
The California Safe Drinking Water and Toxic
Enforcement Act requires the Governor of California
to publish a list of substances known to the state to
cause cancer, birth defects or other reproductive harm,
and requires businesses to warn customers of potential
exposure to such substances.
FEATURES AT A GLANCE
Your Electric Wall
Oven Features At A
Glance
Electronic Oven
Controls with Clock
and Kitchen Timer
Oven Vent
Single or Dual Interior
Oven Lights
Self-Clean Oven
with Hidden Bake
Element or Hidden
Bake Cover
Broil Element
Convection Fan
& Cover
Adjustable
Oven Racks
Large 1 Piece
Door Handle
Glass Oven Door
with Large Window
Opening
Bottom Trim
5
BEFORE SETTING OVEN CONTROLS
Oven Vent Location
Arranging Oven Racks
The oven is vented at the center trim. When the oven is
on, warm air is released through the vent. This venting is
necessary for proper air circulation in the oven and good
baking results.
Always arrange oven racks when THE oven is cool
(Prior to operating the oven). Always use oven mitts
when using the oven.
To remove an oven rack, pull the rack forward until it
stops. Lift up front of rack and slide out.
To replace an oven rack, fit the rack onto the guides on
the oven walls. Tilt the front of the rack upward and slide
the rack back into place.
Recommended Rack Position
Food
Broiling meats, chicken or fish
CAUTION
Some models are equipped with a blower which
runs in baking and self-cleaning mode to keep
all internal components at a cool temperature.
The blower may keep running even if the oven
has been turned off, until the components have
cooled down.
Air Circulation in the Oven
If using 1 rack, place in center of oven. If using multiple
racks, stagger cookware as shown.
For best air circulation and baking results allow 2-4" (5-10
cm) around the cookware for proper air circulation and be
sure pans and cookware do not touch each other, the oven
door, sides or back of the oven cavity. The hot air must
circulate around the pans and cookware in the oven for
even heat to reach around the food.
27” Model
30” Model
Single Oven Rack
Rack Position
3 or 4
Cookies, cakes, pies, biscuits & muffins
Using a single rack
2 or 3
Using multiple racks
2 and 4
Frozen pies, angel food cake, yeast,
bread, 1 or 2 casseroles, small cuts of
meat or poultry
Turkey, roast or ham
1 or 2
1 or
Offset Rack
4
3
2
1
Single Oven Rack
Rack
positions
 NOTE
Multiple Oven Racks
6
Multiple Oven Racks
Always use caution when removing food from the oven.
BEFORE SETTING OVEN CONTROLS
Types of Oven Racks
Your appliance may be equipped with three types of the
oven rack, as shown;
•Flat Handle Oven Rack (Figure 1).
•Flat Oven Half Rack (Figure 2 & 3) (some models).
•Offset Oven Rack (Figure 4).
Flat Handle Oven Rack
Figure 1
CAUTION
Always use pot holders or oven mitts when adjusting the
oven racks. Wait until the oven has completely cooled if
possible. Oven racks may be HOT and may cause burns.
The Flat Oven Handle Rack has an handle to facilitate
the sliding of the rack when large amount of foods weight
on it.
The Flat Oven Half Rack (some models) has a removable
insert that can provide extra space for larger food items.
The right half rack portion may still be used for other food
items like a casserole dish (See Figure 3 & 4). To remove
the insert, squeeze on the left front insert side (See Figure
5) of the rack and tilt out clockwise. To reinstall, insert
rear hooks at back of insert (See figure 6) and lay insert
down. Make sure both insert front hooks snap into rack
(See figure 6).
The Offset Oven Rack is used to maximize cooking space
(See Figure 4). The offset rack can be used in the lower rack
position to roast large cuts of meat and poultry.
Do not use cookware that extends beyond the edge of the
Flat Half Rack. For best results, allow 2 inches between the
pan placed on the rack and oven side or rear walls.
Flat Half Oven Rack - Closed Position
Figure 2
Figure 5
Flat Half Oven Rack - Open Position
Figure 3
Offset Oven Rack
Figure 4
Figure 6
7
BEFORE Setting OVEN controls
Control Pad Features
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each feature
and function follow later in this Use & Care Guide.
Model A :
6
1
2
3
7
8
9
12
13
4
5
10
11
16
14
5
9
8
7
13
12
2
3
10
11
19
18
4
1
6
14
15
15
17
Model B :
1
2
3
7
8
9
12
13
4
5
10
11
14
16
18
19
1
2
4
10
11
8
14
13
15
5
12
15
1
BAKE PAD—Use to select the bake cooking feature.
2
BROIL PAD—Use to select the broil cooking feature.
3
CONVECT PAD—Use to select between the Convection
Bake, Convection Roast and Convection Broil (some
models) cooking features.
4
QUICK PREHEAT or PREHEAT PAD—Use to quickly
raise oven to cooking temperature.
5
KEEP WARM PAD—Use to keep the dishes and food
warm until served.
6
PIZZA Pad (some
cooking feature.
11
BAKE TIME PAD—Use to enter the length of the
baking time.
12
OVEN LIGHT PAD—Use to turn the oven light ON
and OFF.
OVEN LOCKOUT PAD—Use to lock the oven door and
the control panel pads.
START PAD—Use to start all oven cooking features.
13
14
15
to select the pizza
CANCEL PAD—Use to cancel any oven feature
previously entered except the time of day and minute
timer.
16
TIMER ON-OFF PAD—Use to set or cancel the Timer.
The Timer does not start or stop cooking.
7
CHICKEN NUGGETS Pad—Use to select the chicken
nuggets cooking feature.
17
ADD A MINUTE PAD (some
minute to the Timer feature.
8
SELF CLEAN PAD—Use to select the self cleaning
feature.
18
NUMERIC PAD—Use to enter temperatures and
times.
9
CONVECT CONVERT PAD—Use to convert a regular
recipe temperature to a convection temperature.
19
SET CLOCK PAD—Use to set the time of day.
10
DELAY START PAD—Use to program a Delayed Timed
Bake or Delay Self-Cleaning cycle start time.
8
models)—Use
models)—Use
to add a
Setting OVEN controls
Minimum and Maximum Control Pad Settings
All of the features listed below have minimum and maximum time or temperature settings that may be entered into the
control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven
Lockout pad is delayed 3 seconds).
An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above
the maximum settings for the feature.
FEATURE
PREHEAT
BAKE
BROIL
CONVECTION BAKE
CONVECTION ROAST
CONVECTION BROIL
PIZZA
CHICKEN NUGGETS
TIMER
CLOCK TIME
DELAY START
BAKE TIME
SELF CLEAN TIME
12
24
12
24
12
24
12
24
Hr.
Hr.
Hr.
Hr.
Hr.
Hr.
Hr.
Hr.
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
MINIMUM TEMP. /TIME MAXIMUM TEMP. /TIME
170°F/77°C
550°F/288°C
170°F/77°C
550°F/288°C
400°F/205°C
550°F/288°C
170°F/77°C
550°F/288°C
170°F/77°C
550°F/288°C
400°F/205°C
550°F/288°C
170°F/77°C
550°F/288°C
170°F/77°C
550°F/288°C
0:01 Min.
11:59 Hr./Min.
0:01 Min.
11:59 Hr./Min.
1:00 Hr./Min.
12:59 Hr./Min.
0:00 Hr./Min.
23:59 Hr./Min.
1:00 Hr./Min.
12:59 Hr./Min.
0:00 Hr./Min.
23:59 Hr./Min.
0:01 Min.
5:59 Hr./Min.
0:01 Min.
5:59 Hr./Min.
2 hours
4 hours
Important Things to Know Before
Setting any Oven Cooking Feature
This appliance has been factory pre-set to start any
BAKE, CONVECTION BAKE, CONVECTION ROAST or
QUICK PREHEAT feature with the oven set temperature
automatically set for 350°F. The BROIL or CONVECTION
BROIL features are pre-set at 550°F. However if desired, the
oven set temperature may be adjusted at any time during
the cooking process. You may also choose to add a BAKE
TIME or DELAY START with most of the functions listed
above, unless specified in their corresponding section.
 NOTE
Temperature Visual Display
Your oven is equipped with a temperature visual display.
When a cooking mode is set, the actual temperature will
be shown in the display and will rise as the unit preheat.
When the unit has reached its target temperature, a chime
will sound to remind you to place the food in the oven.
This feature will be active with some cooking modes;
BAKE, convection bake, convection roast
and pizza.
 NOTE
The lowest temperature that can be displayed is 100°F.
The lower oven of model B is not equipped with a
convection fan & element. All the associated convection
cooking features will not be available in this oven.
9
Setting OVEN controls
Setting the Clock
The SET CLOCK pad is used to set the clock. The clock may
be set for 12 or 24 hour time of day operation. The clock
has been preset at the factory for the 12 hour operation.
When the range is first plugged in, or when the power
supply to the range has been interrupted, the timer in the
display will flash.
To set the clock (example below for 1:30)
1. Press SET CLOCK. “CLO” will appear in the display.
2. Press 1 3 0 pads to set the time of day to 1:30. “CLO”
will stay in the display.
3. Press START. “CLO” will disappear and the clock will
start.
Changing between 12 or 24 hour time
of day display
1. Press and hold SET CLOCK for 6 seconds. “CLO” will
appear in the display.
Setting Continuous Bake or 6 Hour
Energy Saving
The TIMER and SELF CLEAN pads control the Continuous
Bake or 6 Hour Energy Saving features. The oven control has
a factory preset built-in 6 Hour Energy Saving feature that
will shut off the oven if the oven control is left on for more
than 6 hours. The oven can be programmed to override this
feature for Continuous Baking.
To set the control for Continuous Bake or 6 Hour
Energy Saving features
1. Press and hold TIMER for 6 seconds.
After 6 seconds “6Hr OFF” or “StAY On” will appear
in the display and the control will beep once.
2. Press SELF CLEAN to switch between the 6 Hour Energy
Saving and continuous bake features.
Note: “6Hr OFF” in the display indicates the control is set for
the 6 Hour Energy Saving mode and “StAY On” indicates
the control is set for the Continuous Bake feature.
2. CONTINUE holding the pad until “12Hr dAY” or “24Hr
dAY” appears in the display and the control beeps
once.
3. Press START to accept the change (display will return to
time of day) or press CANCEL to reject the change.
3. Press SELF CLEAN to switch between the 12 and 24
hour time of day display. The display will show either
“12Hr dAY” or “24Hr dAY”.
Setting Temperature Display —
Fahrenheit or Celsius:
4. Press START to accept the change or press CANCEL to
reject the change.
The BROIL and SELF CLEAN pads control the Fahrenheit
or Celsius temperature display modes. The oven control can
be programmed to display temperatures in Fahrenheit or
Celsius. The oven has been preset at the factory to display
in Fahrenheit.
5. Reset the correct time as described in To set the Clock
above. Please note that if the 24 hour time of day mode
was chosen, the clock will now display time from 0:00
through 23:59 hours.
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
BROIL and hold it for 6 seconds; “550°” will appear
and “BROIL” will flash in the display and a beep will
sound. If “FAhrnht” appears, the display is set to show
temperatures in Fahrenheit. If “CELSIUS” appears, the
display is set to show temperatures in Celsius.
2. Press SELF CLEAN to switch between Fahrenheit or
Celsius display modes. The display will show either
“FAhrnht” or “CELSIUS”.
3. Press START to accept the change or press CANCEL
to reject the change.
10
Setting OVEN controls
Setting Oven Lockout Feature
The
pad controls the Oven Lockout feature. The Oven
Lockout feature automatically locks the oven door and
prevents the oven from being turned on. It does not disable
the clock, Minute Timer or the interior oven lights.
To activate the Oven Lockout feature
1. Press and hold
for 3 seconds.
2. After 3 seconds “Loc” will appear, a beep will sound and
“DOOR” will flash in the display. Once the oven door
is locked the “DOOR” will stop flashing and remain on
along with the “Loc” and the icon will appear.
To reactivate normal oven operation:
1. Press and hold
for 3 seconds. A beep will sound. The
“DOOR” will flash in the display until the oven door has
completely unlocked and the icon will disappear.
2. The oven is again fully operational.
Setting Silent Control Operation
The DELAY START and SELF CLEAN pads control the
Silent Control operation feature. The Silent Control operation
feature allows the oven control to be operated without
sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned
to operating with all the normal sounds and beeps.
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent operation
press and hold DELAY START. “-- --” will appear and
“DELAY” will flash in the display. After 6 seconds “bEEP
On” or “bEEP OFF” will appear in the display.
2. Press SELF CLEAN to switch between normal sound
operation and silent operation mode. The display will
show either “bEEP On” or “bEEP OFF”.
Note: If “bEEP On” appears, the control will operate with
normal sounds and beeps. If “bEEP OFF” appears,
the control is in the silent operation mode.
3. Press START to accept the change or press CANCEL
to reject the change.
Note: The control will always beep at the end of a minute
timer and will beep when a set temperature has been reached,
even if the control is set to silent operation.
Setting MINUTE Timer
The TIMER ON.OFF pad controls the Minute Timer feature.
The Minute Timer serves as an extra timer in the kitchen
that will beep when the set time has run out. It does not
start or stop cooking. The Minute Timer feature can be
used during any of the other oven control functions. Refer
to “Minimum and Maximum Control Pad Settings” for time
amount settings.
To set the Minute Timer (example for 5 minutes)
1. Press TIMER ON.OFF. “-- --” will appear in the
display.
2. Use the number pads to set the desired time in the
display; press 5.
3. Press START. The time will begin to count down with
“5:00” in the display.
Note: If START is not pressed the timer will return to the
time of day after 25 seconds.
4. When the set time has run out, “End” will show in
the display. The clock will sound with 3 beeps every 5
seconds until TIMER ON.OFF is pressed.
To cancel the Minute Timer before the set time has
run out
1. Press TIMER ON.OFF. The display will return to the time
of day.
Setting Add 1 Minute Feature (some
models)
The ADD 1 MINUTE pad is used to set the Add 1 Minute
feature. When the ADD 1 MINUTE pad is pressed, 1
minute is added to the Minute Timer feature if this feature
is already active. If the Minute Timer feature is not active
and the ADD 1 MINUTE pad is pressed, the Minute Timer
feature will become active and will begin counting down
from 1 minute.
11
Setting OVEN controls
Setting Quick Preheat or Preheat
Setting Bake
The PREHEAT pad controls the Quick Preheat or Preheat
feature. The Preheat feature will bring the oven up to
temperature and then indicate when to place the food in
the oven. Use this feature when recipes call for preheating.
Preheating is not necessary when roasting or cooking
casseroles. The oven can be programmed to preheat at any
temperature between 170°F to 550°F.
The BAKE pad controls normal baking. If a rapid preheating
is preferred, refer to the PREHEAT feature for instructions.
The oven can be programmed to bake at any temperature
from 170°F to 550°F.
To set the Preheat temperature for 375°F
1. Arrange the interior oven racks.
2. Press PREHEAT. “350” will appear in the display. If a
preheat of 350°F is needed, press START.
3. Press 3 7 5.
4. Press START. “PRE” will be displayed while the oven is
preheating.
5. Press CANCEL when baking is complete or to cancel the preheat feature.
 NOTE
After the oven has reached the desired temperature (this
example, 375°F) the control will beep and the “PRE” light
will turn off, the BAKE feature will activate and oven target
temperature will be displayed. If you missed hearing the
beep, you can tell that the oven has reached preheat
temperature if you see the oven temperature showing in
the oven display. Once the oven has preheated, place
food in the oven. The preheat temperature can only be
changed while the “PRE” message is displayed.
To change Preheat temperature while oven is
preheating (ex: changing from 375°F to 425°F)
If it is necessary to change the preheat temperature while
the oven is preheating to the original temperature:
1. While preheating, press PREHEAT. “375” will appear
in the display.
2. Enter the new preheat temperature. Press 4 2 5.
3. Press START. “PRE” will appear in the display.
Note: A beep will sound once the oven temperature reaches
425°F and the display will show “425°”.
4. When baking is complete press CANCEL.
 NOTE
While in preheat mode, the convection fan will be activated
during the first rise of temperature to allow the oven to
reach its target temperature faster. The Bake, Broil and
Convection elements will also cycle for a better heat
distribution. On some models, the lower oven is not
equipped with a convection system (denoted by the text
PREHEAT on the control panel), and thus will take longer
to reach its target temperature.
12
Baking Tips:
• Preheat your oven before using the bake mode.
• During preheat, the 3 elements and the convection fan
are used in cycle to quickly heat the oven.
• Use only one rack and center the pans as much as possible on rack 2 or 3.
• If using two racks, place the oven racks in positions 2
and 4.
• Allow 2” to 4” (5,1 to 10,2cm) around the utensil(s) for
proper air circulation.
• Be sure the pans do not touch each other, the door,
sides or back of the oven.
To set the Bake Temperature to 375°F
1. Arrange interior oven racks.
2. Press BAKE, “350” will appear in the display. If a bake
of 350°F is needed, press START.
3. Press 3 7 5.
4. Press START. The actual temperature will be displayed.
A beep will sound once the oven temperature reaches
375°F and the display will show “375°”.
5. Place food in the oven.
 NOTE
Pressing CANCEL will stop the feature at any time.
To change the Bake Temperature
(example: changing from 375°F to 425°F)
1. After the oven has already been set to bake at 375°F
and the oven temperature needs to be changed to 425°F,
press BAKE and “375” will appear in the display.
2. Press 4 2 5. “BAKE” will continue to flash and “425°”
will appear in the display.
3. Press START. The actual temperature will be
displayed.
 NOTE
During the first rise of temperature, the convection fan
will be activated to allow the oven to reach its target
temperature faster. The Bake, Broil and Convection
elements will also cycle for a better heat distribution.
SETTING OVEN CONTROLS
Setting Convection Bake
4
This mode of cooking enables you to obtain the best culinary
results when baking with multiple pans and racks. Multiple
rack baking may slightly increase cook time for some foods
but the overall result is time saved. Some food may cook
faster and more evenly with Convection Bake. Convection
baking uses the three elements and a fan to circulate
the oven’s heat evenly and continuously within the oven.
The oven can be programmed for Convection baking at
any temperature between 170°F to 550°F with a default
temperature of 350°F.
3
2
1
Convection Baking Tips:
Oven Rack Positions
Figure 2
•Always preheat your oven before using the Convection
Bake mode.
•During preheat, the 3 elements and the convection fan
are used in cycle to quickly heat the oven.
•If your recipe cooking temperature has already been
converted for convection baking there is no need to reduce your oven temperature. If your recipe has not had
the temperature converted for convection baking you
can easily reduce using the Convection Convert feature.
Please see Convection Convert section on next page for
further instruction on temperature conversion.
•Use tested recipes with times adjusted for convection
baking when using this mode. Time reductions will
vary depending on the amount and type of food to be
cooked.
•When using Convection Bake with a single rack, place
oven rack in position 2 or 3. If cooking on multiple racks,
place the oven racks in positions 2 and 4 or 1, 3 (offset
rack) and 4.
•Most bakeries (except cakes) should be baked on pans
with no sides or very low sides to allow heated air to
circulate around the food.
•Food baked on pans with a dark finish will cook faster.
To set the oven for Convection Bake and temperature
to 375°F
1. Arrange interior oven racks.
2. Press CONVECT. “CONVECT” and “BAKE” will flash
and “350” will appear in the display. If a Convection
Bake of 350°F is needed, press START.
3. Press 3 7 5. “CONVECT” and “BAKE” will keep flashing
and “375°” will appear in the display.
4. Press START. The actual oven temperature and the fan
icon will be displayed. A beep will sound once the oven
temperature reaches 375°F and the display will show
“375°”, “CONVECT”, “BAKE” and the fan icon.
5. Place food in the oven.
 NOTE
Pressing CANCEL will stop the feature at any time.
Benefits of Convection Bake:
— Multiple rack baking.
— Some foods cook faster, saving time and energy.
— No special pans or bakeware needed.
 NOTE
The convection fan will start AS SOON AS the oven is
set for Convection Bake. The display will show an icon
of rotating fan within a square. This rotating fan icon
indicates when the Convection Fan is operating. The Bake,
Broil and Convection elements will also cycle for a better
heat distribution.
Air circulation during Convection Bake
Figure 1
 NOTE
The lower oven of model B is not equipped with a
convection fan & element. All the associated convection
cooking features will not be available in this oven.
13
SETTING OVEN CONTROLS
Setting Convection CONVERT
Setting Convection Roast
The Convection Convert pad is used to automatically convert
a standard baking recipe for convection baking. When
set properly, this feature is designed to display the actual
converted (reduced) temperature in the display. Convection
Convert may ONLY be used with a Convection Bake cooking
mode. It can be used with the features Delay Start and
Bake Time (see their sections for directions). If convection
conversion is used with the Bake Time and Delay Start
features, “CF” (check food) will be displayed when 75% of
the bake time complete. At this time the oven control will
sound 3 long beeps at regular intervals until baking had
finished. When the bake time has completely finished the
control will display “End” and beep at regular interval until
the CANCEL pad is pressed.
This mode is best for cooking tender cuts of beef, lamb, park
and poultry. Use this mode when cooking speed is desired.
The Convection Roasting gently browns the exterior and
seals in the juices. Convection roasting uses the hidden
bake element, the hidden convection element, the broil
element and a fan to circulate the oven’s heat evenly and
continuously within the oven. The oven can be programmed
for Convection Roasting at any temperature between 170°F
to 550°F with a default temperature of 350°F.
 NOTE
To use this feature with the BAKE TIME option, the BAKE
TIME pad must be pressed before the CONVECTION
CONVERT pad.
To set the oven for Convection Bake with a standard
baking recipe temperature of 400°F:
1. Arrange interior oven racks.
2. Press CONVECT. “CONVECT” and “BAKE” will flash
and “350” will appear in the display.
3. Press 4 0 0. “CONVECT” and “BAKE” will keep flashing
and “400°” will appear in the display.
4. Press CONVECTION CONVERT. As soon as the
convection convert pad is pressed, the oven will start
heating. The temperature displayed will be 25°F lower
than what it used to be. The actual oven temperature
and the fan icon will be displayed. A beep will sound
once the oven temperature reaches 375°F and the
display will show “375°”, “CONVECT”, “BAKE” and
the fan icon.
5. Place food in the oven.
 NOTE
When using a Bake Time under 20 minutes, the Convection
Convert will not beep and display the “CF” message.
Convection Roasting Tips:
• Use a broiler pan and grid, and a roasting rack (available
by mail order). The broiler pan will catch grease spills
and the grid will help prevent spatters. The roasting rack
will hold the meat.
• Place an oven rack on rack position 1 (offset rack).
• No preheat is needed in convection roast.
• Make sure the roasting rack is securely seated on the
grid in the broiler pan. The roasting rack fits on the grid
allowing the heated air to circulate under the food for even
cooking and helps to increase browning on the underside
(available by mail order only).
• There is no need to reduce the convection temperature or
to use the Convection Convert feature with this cooking
mode.
• DO NOT use the broiler pan without the grid or cover
the grid with aluminum foil (available by mail order).
• Always pull the rack out to the stop position before
removing food.
• Position food (fat side up) on the roasting rack.
To set a Convection Roast Temperature of 375°F:
1. Arrange oven racks and place food in the oven.
2. Press CONVECT; “350” will be displayed; “CONVECT”
and “BAKE” will flash.
3. Press CONVECT again; “350” will be displayed;
“CONVECT” and “ROAST” will flash.
4. Enter the desired roasting temperature using the number
pads 3 7 5.
5. Press START; The actual oven temperature will be
displayed, “CONVECT”, “ROAST” and the fan icon will
be displayed. The Bake, Broil and Convection elements
will also cycle for a better heat distribution.
 NOTE
Pressing CANCEL will stop the feature at any time.
 NOTE
 NOTE
The lower oven of model B is not equipped with a
convection fan & element. All the associated convection
cooking features will not be available in this oven.
14
The Bake, Broil and Convection elements will cycle for a
better heat distribution.
SETTING OVEN CONTROLS
Setting Convection BROIL (some models)
Use this mode for thicker cuts of meat, fish and poultry.
The Convection Broiling gently browns the exterior and
seals in the juices. Convection broiling uses the broil
element and a fan to circulate the oven’s heat evenly and
continuously within the oven. The oven can be programmed
for Convection Broiling at any temperature between 300°F
to 550°F with a default temperature of 550°F.
Convection Broiling Tips:
•For optimum browning, preheat the broil element for 5
minutes.
•Broil one side until the food is browned; turn and cook
on the second side. Season and serve.
•Always pull the rack out to the “stop” position before
turning or removing food.
• Always use a broiler pan and its grid when broiling
(available by mail order). It allows the dripping grease to
be kept away from the high heat of the broil element.
• DO NOT use the broil pan without the insert (available
by mail order). DO NOT cover the broil pan insert
with foil. The exposed grease could catch fire.
•If using a Searing Grill (available by mail order), preheat
the grill for 5 to 10 minutes before placing your meat.
• Convection broiling is generally faster than conventional
broiling. Check for doneness at the minimum
recommended time.
To set a Convection Broil Temperature of 500°F:
1. Arrange oven racks.
2. Press CONVECT; “350” will be displayed; “CONVECT”
and “BAKE” will flash.
3. Press CONVECT again; “350” will be displayed;
“CONVECT” and “ROAST” will flash.
4. Press CONVECT again; “550” will be displayed;
“CONVECT” and “BROIL” will flash.
5. Enter the desired roasting temperature using the number
pads 5 0 0.
6. Press START; “550”, “CONVECT”, “BROIL” and the
fan icon will be displayed.
7. After 5 minutes of preheat, place food in the oven.
 NOTE
Pressing CANCEL will stop the feature at any time.
Accessories available via the enclosed brochure:
Broiler
Insert
Searing
Grill
Broiler
Pan
WARNING
Figure 1
Should an oven fire occur, leave the oven door closed and
turn off the oven. If the fire continues, throw baking soda
on the fire or use a fire extinguisher. DO NOT put water
or flour on the fire. Flour may be explosive and water can
cause a grease fire to spread and cause personal injury.
Broiler Pan
& Insert
Figure 2
CAUTION
Always use this cooking mode with the oven door closed
or the convection fan will not turn on.
Electric Oven Convection Broiling Table Recommendations
Cook Time
Rack
Position
Temperature
Setting
1st side
2nd side
3rd or 4th
550° F
6:00
4:00
Rare
3rd or 4th
550° F
7:00
5:00
Medium
3rd or 4th
550° F
8:00
6:00
Well
Chicken - Bone In
3rd
450° F
20:00
10:00
Well
Chicken - Boneless
3rd or 4th
450° F
8:00
6:00
Well
Fish
3rd
500° F
13:00
-
Well
Shrimp
3rd
550° F
5:00
-
Well
3rd or 4th
550° F
9:00
7:00
Medium
3rd or 4th
550° F
10:00
8:00
Well
Food Item
Steak 1” thick
Pork Chops 3/4” thick
Hamburger 1” thick
Doneness
15
SETTING OVEN CONTROLS
Setting BAKE TIME
Setting DELAY START
Bake Time allows the oven to be set to cook for a specific
length of time and shut off automatically.
The BAKE, CONVECT BAKE, BAKE TIME and DELAY
START pads control the Delayed Time Bake feature. The
automatic timer of the Delayed Time Bake will turn the oven
on and off at the time you select in advance.
The oven will shut off and will beep when the countdown
is finished. This feature can be used with Bake, Convection
Bake, Convection Roast, Pizza and Chicken Nuggets cooking
modes.
To program the oven to begin baking immediately
and to shut off automatically (example: BAKE at
350°F for 30 minutes):
1. Be sure the clock is set for the correct time of day.
2. Arrange interior oven rack(s) and place the food in the
oven.
3. Press BAKE, “350” will appear in the display.
4. Press START. The actual oven temperature will appear
in the display.
5. Press BAKE TIME. “-- --” will appear in the display.
6. Enter the desired baking time by pressing 3 0.
7. Press START. Once the Timed Bake feature has started,
the current time of day will appear in the display.
 NOTE
Baking time can be set for any amount of time between
1 minute to 6 hours. The time remaining can be shown in
the timer section of the display by pressing BAKE TIME
at any moment of the cooking. Once Bake Time has started
baking, a beep will sound when the oven temperature reaches
the set temperature.
Press CANCEL when baking has finished or at any time to
cancel the Timed Bake feature. A Bake Time of “0” minute
can also be entered to cancel the Bake Time feature and
keep the oven in its current cooking mode.
When the timed bake finishes:
1. “End” and the time of day will show in display. The
oven will shut off automatically.
2. The control will beep 3 times. The control will continue
to beep 3 times every 30 seconds until CANCEL is
pressed.
 NOTE
If your clock is set for normal 12 hour display mode the
Delayed Timed Bake or Delayed Timed Convection Bake
cycle can never be set to start more than 12 hours in
advance. To set for Delayed Timed Bake or Delayed Timed
Convection Bake 12-24 hours in advance set the control
for the 24 hour time of day display mode.
To program the oven for a delayed BAKE start time
(example: baking at 375°F, starting at 5:30):
1.Be sure that the clock is set with the correct time of day.
2.Arrange interior oven rack and place the food in the oven.
3.Press BAKE. “350” will appear in the display.
4.Enter the desired temperature; pressing 3 7 5.
5.Press START. The actual oven temperature will appear
in the display.
6.Press DELAY START.
7.Enter the desired start time; pressing 5 3 0.
8.Press START. When Delayed Time Bake starts, the set
oven temperature will appear, “DELAY”, “BAKE” and the
current time of day will appear in the display.
 NOTE
If it is desired to have the oven shut off automatically after
a set time; enter a BAKE TIME at this step.
7.When the desired start time is reached, the actual
oven temperature appears in display and “DELAY”
disappears. Oven starts to bake at the previously selected
temperature.
Press CANCEL when baking has completed or at any time
to cancel the Delayed Time Bake feature.
CAUTION
Use caution with the DELAY START features. Use the automatic timer when cooking cured or frozen meats and most fruits
and vegetables. Foods that can easily spoil such as milk, eggs, fish, meat or poultry, should be chilled in the refrigerator
first. Even when chilled, they should not stand in the oven for more than 1 hour before cooking begins, and should be
removed promptly when cooking is completed. Eating spoiled food can result in sickness from food poisoning.
16
SETTING OVEN CONTROLS
SETTING BROIL
This mode is best for meats, fish and poultry up to 1”
thick. Broiling is a method of cooking tender cuts of meat
by direct heat under the broil element of the oven. The
high heat cooks quickly and gives a rich, brown outer appearance. The BROIL pad controls the Broil feature. An
optional Searing Grill, Broiler Pan and Insert are available
via the enclosed accessories brochure (Figure 2 & 3). The
optional broil pan and broil pan insert used together allow
dripping grease to drain and be kept away from the high
heat of the oven broiler. The oven can be programmed
to broil at any temperature from 400°F to 550°F with a
default temperature of 550°F.
Broiling Tips:
•For optimum browning, preheat the broil element for 5
minutes.
•Broil one side until the food is browned; turn and cook
on the second side. Season and serve.
•Always pull the rack out to the “stop” position before
turning or removing food.
•Always use the broiler pan and its cover when broiling.
It allows the dripping grease to be kept away from the
high heat of the broil element (see Figure 2).
•For best broiling results, broil with the oven door in the
broil stop position (see Figure 1).
•If using a Searing Grill (available by mail order), preheat
the grill for 5 to 10 minutes before placing your meat.
•DO NOT use the broil pan without the insert. DO NOT
cover the broil pan insert with foil. The exposed
grease could catch fire.
Accessories available via the enclosed brochure:
Broiler
Insert
Searing
Grill
To set a Broil of 500°F:
1. Place the broiler pan insert on the broiler pan. Then place
the food on the broiler pan insert. DO NOT use the broiler
pan without the insert. DO NOT cover the broiler insert
with foil. The exposed grease could ignite.
2. Arrange the interior oven rack and place the broiler pan
on the rack. Be sure to center the broiler pan directly
under the broiler element. Make sure the oven door
is in the broil stop position (See Figure 1).
3. Preheat for 2 minutes before broiling.
4. Press BROIL. “550” will appear in the display.
5. Press 5 0 0. If a lower broil temperature is desired
(minimum broil temperature setting is 400°F), press
the desired temperature before continuing to step 5.
6. Press START. The oven will begin to broil. “500°” will
appear in the display.
7. Broil on one side until
food is browned; turn
and cook on the second
side. Season and serve.
Note: Always pull the
rack out to the stop
Broil Stop Position
position before turning
Figure 1
or removing food.
8. To stop broiling press
CANCEL.
 NOTE
To assure your electronic controls safety when broiling with
the oven door in broil position, an high speed cooling fan
will blow air through the trims above the door(s).
WARNING
Broiler Pan
& Insert
Broiler
Pan
Figure 2
Figure 3
Should an oven fire occur, leave the oven door closed and
turn off the oven. If the fire continues, throw baking soda
on the fire or use a fire extinguisher. DO NOT put water
or flour on the fire. Flour may be explosive and water can
cause a grease fire to spread and cause personal injury.
Electric Oven Broiling Table Recommendations
Food Item
Steak 1” thick
Pork Chops 3/4” thick
Chicken - Bone In
Chicken - Boneless
Fish
Shrimp
Hamburger 1” thick
Rack
Position
3rd or 4th
3rd or 4th
3rd or 4th
3rd
3rd or 4th
3rd
3rd
3rd or 4th
3rd or 4th
Temperature
Setting
550°
550°
550°
450°
450°
500°
550°
550°
550°
F
F
F
F
F
F
F
F
F
Cook Time
1st side
6:00
7:00
8:00
20:00
8:00
13:00
5:00
9:00
10:00
2nd side
4:00
5:00
6:00
10:00
6:00
7:00
8:00
Doneness
Rare
Medium
Well
Well
Well
Well
Well
Medium
Well
17
SETTING OVEN CONTROLS
SETTING CHICKEN NUGGETS
SETTING PIZZA (some models)
The CHICKEN NUGGETS pad has been designed to give
optimum cooking performance when cooking your favorite
chicken nuggets. The Chicken Nuggets pad is preset for a
Convection Bake at (400°F) with a Bake Time of 18 minutes,
ending with a Keep Warm setting. If needed, a different
target temperature or Bake Time than the presets can be
entered.
The PIZZA pad has been designed to give optimum cooking
performance when cooking your favorite pizza. The Pizza
pad let you choose a preset between a frozen pizza (425°F)
and a fresh pizza (400°F). If needed, a different target
temperature than the presets can be entered. Some fresh
pizza request using a broil feature for a few minutes, but
this is not part of the Pizza pad presets.
Chicken Nuggets Tips:
• For most type of chicken nuggets, preheating is not
required and the preset baking time of the feature will
give you optimum results.
• For larger chicken tenders, follow the preheating and
baking instructions on the box and only use a single
rack.
• For a single rack, use rack position 2.
• For multiple racks, use rack positions 2 and 3.
Pizza Tips:
To set Chicken Nuggets:
1. Arrange interior oven racks and place food in oven.
2. Press CHICKEN NUGGETS pad. “CHI” will appear in the
display. If a different temperature than 400°F is needed,
enter the temperature now, using the keypad digits. If a
different Bake Time than 18 minutes is required, press
BAKE TIME and enter the desired time (or 0 for an
untimed baking).
 NOTE
The Chicken Nuggets feature is automatically programmed
to activate the Keep Warm feature when the cooking is
finished. “HLD” will be displayed for a maximum of 3 hours.
See the Keep Warm feature for more information.
3. Press START. The fan icon will appear in the display.
4. To turn OFF the Chicken Nuggets feature at any time
press CANCEL.
18
•Follow the instructions on the box for preheating and
baking times.
•For optimum cooking results, only bake one pizza at
once on rack position 2.
•Check the pizza at 75% of the maximum cook time
listed on the package.
To set Pizza for a frozen pizza:
1. Arrange interior oven racks.
2. Press PIZZA pad. “Fro” will appear in the display. If a
different temperature than 425°F is needed, enter the
temperature now, using the keypad digits.
3. Press START. The fan icon and the actual oven
temperature will appear in the display.
4. Place the pizza in the oven when the beep is heard.
5. If needed, enter a BAKE TIME (see its section for further
details).
6. To turn OFF the Pizza feature at any time press
CANCEL.
To set Pizza for a fresh pizza:
1. Arrange interior oven racks.
2. Press PIZZA pad twice. “Frh” will appear in the display.
If a different temperature than 400°F is needed, enter
the temperature now, using the keypad digits.
3. Press START. The fan icon and the actual oven
temperature will appear in the display.
4. Place the pizza in the oven when the beep is heard.
5. If needed, enter a BAKE TIME (see its section for further
details).
6. To turn OFF the Pizza feature at any time press
CANCEL.
SETTING OVEN CONTROLS
SETTING KEEP WARM
This mode is best for keeping oven baked foods warm for
serving after cooking has finished. The KEEP WARM pad
turns ON the Keep Warm feature and will maintain an oven
temperature of 170°F (77°C). The Keep Warm feature will
keep oven baked foods warm for serving up to 3 hours
after cooking has finished. After 3 hours the Keep Warm
feature will shut the oven OFF. The Keep Warm feature
may be used without any other cooking operations or can
be set to turn ON automatically after a BAKE TIME or
DELAYED BAKE TIME.
Keep Warm Tips:
•Always start with hot food.
•Do not use the Keep Warm feature to heat cold food.
•Food in heat-safe glass and glass ceramic containers
may need higher temperature settings compared to
food in regular containers.
•Avoid repeated openings of the oven, it will allow hot air
to escape and the food to cool.
•Aluminum foil may be used to cover food to increase
moisture content.
To set Keep Warm:
1. Arrange interior oven racks and place food in oven.
2. Press KEEP WARM. “HLd” will appear in the display.
Note: If no pad is touched within 25 seconds the
request to turn ON Keep Warm feature will be
cancelled.
3. Press START. The oven icon will appear in the display.
4. To turn OFF the KEEP WARM at any time press
CANCEL.
To set Keep Warm to turn ON automatically:
1. Arrange interior oven racks and place food in oven.
Set the oven properly for Bake Time or Delayed
Bake Time. (See their respective sections for more
details).
2. Press KEEP WARM.
3. Press START. “HLd” will disappear and the
temperature will be displayed. The Keep Warm mode
is set to turn ON automatically after Timed Bake has
finished.
4. To turn the Keep Warm feature OFF at any time press
CANCEL.
 NOTE
Pressing CANCEL will stop the feature at any time.
19
SETTING OVEN CONTROLS
SETTING the Sabbath Feature (for use on
the Jewish Sabbath & Holidays)
The BAKE TIME and DELAY START pads are used to
set the Sabbath feature. The Sabbath feature may only be
used with the BAKE pad. The oven temperature may be
set higher or lower after setting the Sabbath feature (the
oven temperature adjustment feature should be used only
during Jewish Holidays), however the display will not visibly
show or provide any audible tones indicating whether the
change occurred correctly. Once the oven is properly set
using Bake with the Sabbath feature active, the oven will
remain continuously ON until cancelled. This will override
the factory preset 6-Hour Energy Saving feature.
If the oven light will be needed during the Sabbath, press
OVEN LIGHT
before activating the Sabbath feature.
Once the oven light is turned ON and the Sabbath feature
is active, the oven light will remain ON until the Sabbath
feature is turned OFF. If the oven light needs to be OFF,
be sure to turn the oven light OFF before activating the
Sabbath feature.
To Program the Oven to Begin Baking Immediately &
activate the Sabbath feature (example: baking at 350°F)
1. Be sure that the clock is set with the correct time of day.
2. Place the food in the oven.
3. Press BAKE. “350°” appears in the display.
4. Press START. The actual oven temperature appears in
the display.
5. If you desire to set the oven control for a Bake Time
or DelayedBake Time do so at this time. If not, skip
this step and continue to step 7. Refer to the Bake
Time / Delay Start section for complete instructions.
Remember the oven will shut down after using Bake
Time or Delay Start and therefore may only be used
once during the Sabbath/Jewish Holidays. The maximum
Delayed Start Bake time is 11 hours & 59 minutes.
6. The oven will turn ON and begin heating.
7. Press and hold both the BAKE TIME and DELAY
START pads for at least 3 seconds. “SAb” will appear
in the display. Once “SAb” appears in the display the
oven control will no longer beep or display any further
changes and the oven is properly set for the Sabbath
feature.
8. The oven may be turned OFF at any time by first pressing
CANCEL pad (this will turn the oven OFF only). To turn
OFF the Sabbath feature press and hold both the BAKE
TIME and DELAY START pads for at least 3 seconds.
“SAb” will disappear from the display.
20
IMPORTANT
It is not advised to attempt to activate any other program
feature other than BAKE while the Sabbath feature is
active. ONLY the following key pads will function after
setting the Sabbath feature; 0 to 9, BAKE, START &
CANCEL. All other keypads should not be used once
the Sabbath feature is properly activated.
 NOTE
You may change the oven temperature once baking has
started by pressing BAKE, the numeric key pads for the
temperature you want (example for 425°C press 4 2 5)
and then pressing START twice (for Jewish Holidays
only). Remember that the oven control will no longer
beep or display any further changes once the oven
is set for the Sabbath feature.
Should you experience a power failure or interruption, the
oven will shut off. When power is returned, “SF” (Sabbath
Failure) will be displayed and the oven will not turn back
on automatically. If your food was nearly fully cooked, you
may allow the trapped heat in the oven to finish the cooking
process. Otherwise, you should remove the food when the
power failure occurs, because you may only start the oven
once during the Sabbath/Jewish Holidays. After the Sabbath
observance turn OFF the Sabbath feature and the oven may
be used with all normal functions.
After the Sabbath observance turn OFF the Sabbath feature.
Press and hold both the BAKE TIME and DELAY pads for at
least 3 seconds. “SAb” will disappear from the display and
the oven may be used with all normal functions. For further
assistance, guidelines for proper usage, and a complete list
of models with the Sabbath feature, please visit the web at
http:\\www.star-k.org.
SETTING OVEN CONTROLS
Adjusting Oven Temperature
Oven light
The temperature in the oven has been pre-set at the
factory. When first using the oven, be sure to follow recipe
times and temperatures. If you think the oven is cooking
too hot or too cool for the temperature you select, you
can adjust the actual oven temperature to be more or less
than what is displayed. Before adjusting, test a recipe by
using a temperature setting that is higher or lower than the
recommended temperature. The baking results should help
you to decide how much of an adjustment is needed.
The oven is equipped with 2 oven lights. The oven lights will
turn on automatically, when the oven door is opened.
 NOTE
The oven temperature adjustments made with this feature
will not change the Self-Clean cycle temperature or the Broil
temperature.
The oven light may be turned on when the door is closed by
using the oven light pad located on the control panel. The
oven light key will toggle the lights at full intensity.
To toggle the Oven Lights ON and OFF:
1. Press OVEN LIGHT
.
The interior oven lights are covered with a glass shield held
by a wire holder. The glass shield must be in place whenever
the oven is in use.
To change the interior oven lights, see “Changing the oven
light” in the Care & Cleaning section.
To adjust the oven temperature higher
1. Press BAKE for 6 seconds. “UPO 00” will appear in
the display.
2. To increase the temperature use the number pads to enter
the desired change (Example 30°F) 3 0. The temperature
may be increased as much as 35°F (19°C).
3. Press START to accept the temperature change and the
display will return to the time of day. Press CANCEL to
reject the change if necessary.
To adjust the oven temperature lower
1. Press BAKE for 6 seconds. 0° will appear in the
display.
2. To decrease the temperature use the number pads to
enter the desired change (Example -30°F) 3 0 and then
press SELF CLEAN. The temperature may be decreased
as much as 35°F (19°C).
3. Press START to accept the temperature change and the
display will return to the time of day. Press CANCEL to
reject the change if necessary.
 NOTE
The oven temperature adjustments are permanent and
will stay forever in the unit memory unless you manually
change it again. Even a power outage will not reset these
changes. Follow the same procedure again if you wish to
change it to a different setting.
21
SELF-CLEANING
SELF-CLEANING
What to Expect during Cleaning
A self-cleaning oven cleans itself with high temperatures
(well above normal cooking temperatures) which eliminate
soils completely or reduces them to a fine powdered ash
you can wipe away with a damp cloth.
While the oven is in operation, the oven heats to temperatures
much higher than those used in normal cooking. Sounds
of metal expansion and contraction are normal. Odor is
also normal as the food soil is being removed. Smoke may
appear through the oven vent.
IMPORTANT
Adhere to the following cleaning precautions:
• DO NOT use oven cleaners or oven protective coatings
in or around any part of the oven interior.
• DO NOT clean the oven door gasket. The woven material
of the oven door gasket is essential for a good seal.
Care should be taken not to rub, damage or remove
the gasket.
If heavy spillovers are not wiped up before cleaning, they
may flame and cause more smoke and odor than usual. This
is normal and safe and should not cause alarm. If available,
use an exhaust fan during the self-cleaning cycle.
CAUTION
• DO NOT use any cleaning materials on the oven door
gasket. Doing so could cause damage.
To avoid possible burns use care when opening the oven
door after the Self-Cleaning cycle. Stand to the side of
the oven when opening the door to allow hot air or steam
to escape.
• Remove the broiler pan and insert, all utensils
and any aluminum foil. These items cannot
withstand high cleaning temperatures and will
melt.
During the Self-Cleaning cycle, the outside of the range
can become very hot to the touch. DO NOT leave small
children unattended near the appliance.
• Completely remove ALL OVEN RACKS and ANY
ACCESSORIES. If the oven racks are not removed,
they will lose their special coating properties and
will no longer slide in and out of the oven cavity
effortlessly.
• Remove any excessive spillovers in the oven cavity
before starting the Self-Cleaning cycle. To clean, use
hot, soapy water and a cloth. Large spillovers can
cause heavy smoke or fire when subjected to high
temperatures. DO NOT allow food spills with a high sugar
or acid content (such as milk, tomatoes, sauerkraut,
fruit juices or pie filling) to remain on the surface as
they may leave a dull spot even after cleaning.
• Clean any soil from the oven frame, the door liner outside
the oven door gasket and the small area at the front
center of the oven bottom. These areas heat sufficiently
to burn soil on. Clean with soap and water.
DO HAND
CLEAN FRAME
DO NOT HAND
CLEAN OVEN
DOOR GASKET
DO HAND
CLEAN DOOR
22
The health of some birds is extremely sensitive to the
fumes given off during the Self-Cleaning cycle of any
range. Move birds to another well-ventilated room.
DO NOT line the oven walls, racks, bottom or any other
part of the range with aluminum foil. Doing so will
destroy heat distribution, produce poor baking results and
cause permanent damage to the oven interior (aluminum
foil will melt to the interior surface of the oven).
DO NOT force the oven door open. This can damage the
automatic door locking system. Use caution when opening
the door after the Self-Cleaning cycle is completed. The
oven may still be VERY HOT.
 NOTE
See additional cleaning information for the oven door in
the General Care & Cleaning section.
SELF-CLEANING
SETTING SELF-CLEAN CYCLE TIME LENGTH
The SELF CLEAN pad controls the Self-Cleaning feature. If
you are planning to use the oven directly after a self-clean
cycle remember to allow time for the oven to cool down
and the oven door to unlock. This normally takes about one
hour. So a 3 hour self-clean cycle will actually take about
4 hours to complete.
*It is recommend to use a 2 hour self-clean cycle for light
soils, a 3 hour cycle for average soils, and a 4 hour cycle
for heavy soils (to assure satisfactory results).
To set the controls for a 3 hour Self-Cleaning cycle
to start immediately and shut off automatically
1. Be sure the clock is set with the correct time of day and
the oven door is closed.
2. Press SELF CLEAN. “DOOR” will flash. “3:00” and CLn
will show in the display. The control will automatically
clean for a 3 hour period (default self-cleaning cycle
time). For the first 10 seconds, “Remove Racks” will
flash and beep to remind you that the racks need to be
removed.
 NOTE
If a 2 or 4 hour clean time is desired, press SELF CLEAN
multiple times to toggle between 2, 3 or 4 hours.
3. Press START. The “DOOR” icon will flash; “CLEAN”
and the letters “CLn” will remain on in the display.
4. As soon as the control is set, the motor driven oven
door lock will begin to close automatically. Once the
door has been locked the “DOOR” indicator light will
stop flashing and remain on and the icon will appear.
Also, the oven icon will appear in the display.
 NOTE
Allow about 15 seconds for the oven door lock to close.
When the Self-Clean Cycle is Completed
1. “HOT” will appear in the display. The time of day, the
“DOOR” and icon will remain in the display.
2. Once the oven has cooled down for approximately 1
HOUR, and the “DOOR” is no longer displayed, the
oven door can then be opened.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning
cycle due to excessive smoke or fire in the oven:
1. Press CANCEL.
2. The oven door can only be opened after the oven has
cooled down for approximately 1 HOUR and the “DOOR”
and icons are no longer displayed.
The SELF CLEAN and DELAY START pads controls the
Delayed Self-Clean operation. The automatic timer will turn
the oven on and off at the time you select in advance.
To set the control for the Self-Cleaning Cycle to
start at a delayed time and shut off automatically
(example: 3 hour self-clean cycle to start at 4:30)
1. Be sure the clock is set with the correct time of day and
the oven door is closed.
2. Press SELF CLEAN. “3:00” and CLn will show in the
display. The control will automatically clean for a 3 hour
period. For the first 10 seconds, “Remove Racks” will
flash and beep to remind you that the racks need to be
removed.
 NOTE
If a 2 or 4 hour clean time is desired, press SELF CLEAN
multiple times to toggle between 2, 3 or 4 hours.
3. Press START. The “DOOR” icon will flash; “CLEAN”,
and the letters “CLn” will remain on in the display.
4. Press DELAY START. Enter the desired start time using
the number pads 4 3 0.
5. Press START. “DELAY”, “DOOR LOCKED” and
“CLEAN” icons will remain on.
6. As soon as the control is set, the motor driven oven
door lock will begin to close automatically. Once the door
has been locked the “DOOR” indicator light will quit
flashing and remain on and the icon will appear.
7. The control will start the self-cleaning at the set start
time, for the period of time previously selected. At that
time, the icon “DELAY” will go out; “CLn” and oven
icon will appear in the display.
When the Self-Clean Cycle is Completed
1. “HOT” will appear in the display. The time of day, the
“DOOR” and icon will remain in the display.
2. Once the oven has cooled down for approximately 1
HOUR, and the “DOOR” is no longer displayed, the
oven door can then be opened.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning
cycle due to excessive smoke or fire in the oven:
1. Press CANCEL.
2. The oven door can only be opened after the oven has
cooled down for approximately 1 HOUR and the “DOOR”
and icons are no longer displayed.
23
CARE & CLEANING
Cleaning Various Parts of Your Range
Before cleaning any part of the range, be sure all controls are turned OFF and the range is COOL. Remove spillovers and
heavy soiling as soon as possible. Regular cleaning will reduce the number of major cleaning later.
Surface type
Recommendation
• Aluminum & Vinyl
Use hot, soapy water and a cloth. Dry with a clean cloth.
• Painted and plastic control
knobs
• Painted body parts
• Painted decorative trims
Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of
vinegar and water. Follow by rinsing the area with clean water; dry and polish with
a soft cloth. Glass cleaners may be used if sprayed on a soft cloth first. DO NOT
spray liquids directly on the control pad and display area. Do not use large amounts
of water on the control panel - excess water on the control area may cause damage
to the appliance. Do not use other liquid cleaners, abrasive cleaners, scouring pads,
or paper towels - they will damage the finish. To remove control knobs, turn to the
OFF position; grasp firmly and pull straight off the shaft. To replace knobs after
cleaning, line up the flat sides of both the knob and the shaft; then push the knob
into place.
• EasyCareTM Stainless Steel
Your range finish is may be made with Easy Care™ Stainless Steel (some models).
Clean the stainless with warm soapy water using a clean sponge or cloth. Rinse
with clean water and dry with a soft clean cloth. DO NOT use ANY store bought
cleaners like Stainless Steel cleaners or any other types of cleaners containing any
abrasive, chlorides, chlorines or ammonia. It is recommended to use mild dish soap
and water or a 50/50 solution of water and vinegar.
• Porcelain enamel broiler
pan and insert (available by
mail order)
• Door liner & body parts
Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a
1:1 solution of clear water and ammonia. If necessary, cover difficult spots with an
ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean water and a
damp cloth, and then scrub with a soap-filled scouring pad. Rinse and wipe dry with
a clean cloth. Remove all cleaners or the porcelain may become damaged during
future heating. DO NOT use spray oven cleaners on the cooktop.
• Oven racks
Oven racks must be removed from oven cavity. Clean by using a mild, abrasive
cleaner following manufacturer’s instructions. Rinse with clean water and dry.
• Oven door
Use soap & water to thoroughly clean the top, sides and front of the oven door. Rinse
well. You may use a glass cleaner on the outside glass of the door. Do not immerse
the door in water. Do not spray or allow water or the glass cleaner to enter
the door vents. Do not use oven cleaners, cleaning powders or any harsh abrasive
cleaning materials on the outside of the oven door.
Do not clean the oven door gasket. On self-clean models, the oven door gasket is
made of a woven material which is essential for a good seal. Care should be taken
not to rub, damage or remove this gasket.
To Remove the “Hidden Bake” Cover (some models)
1. In order to remove the “hidden bake” cover, pull the back edge with one hand
about ½ inch and lift up the “hidden bake” cover with both hands. (See picture)
2. When re-installing the “hidden bake” cover, be sure to put it all the way to the
back of the oven and lay it down on the 2 shoulder screws. Then push the front
edge of the cover in its place below the front bracket.
To have easier access to the “hidden bake” cover, you can remove the oven door by
following the instructions on previous page.
IMPORTANT
Always replace the “hidden bake” cover before the next use.
24
Care & Cleaning
Removing and Replacing the LiftOff Oven Door
CAUTION
Around
Oven door
The door is heavy. For safe, temporary storage, lay the
door flat with the inside of the door facing down.
To Remove Oven Door:
1. Open oven door completely (horizontal with floor See Figure 1).
2. Pull the door hinge locks on both left and right
door hinges down from the oven frame completely
towards the oven door (See Figure 2). A tool such as
a small flat-blade screwdriver may be required.
3. Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - See Figure 3).
4. Close the door to the broil stop position (the oven
door will stop into this position just before fully
closing).
5. With the oven door in the broil stop position, lift the
oven door hinge arms over the roller pins located on
each side of the oven frame (See Figure 4).
To Replace Oven Door:
1. Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - See Figure 3).
2. Holding the oven door at the same angle as the
removal position, seat the hook of the hinge arm over
the roller pins located on each side of the oven door
frame (See Figure 4). The hook of the hinge arms
must be fully seated onto the roller pins.
3. Fully open the oven door (horizontal with floor - See
Figure 1).
4. Push the door hinge locks up towards and into the
oven frame on both left and right oven door hinges
(See Figure 2) to the locked position.
5. Close the oven door.
Hinge
Figure 3
Figure 4
Special Door Care Instructions - Most oven doors
contain glass that can break.
Read the following recommendations:
1. Do not close the oven door until all the oven racks
are fully in place.
2. Do not hit the glass with pots, pans, or any other
object.
3. Scratching, hitting, jarring or stressing the glass may
weaken its structure causing an increased risk of
breakage at a later time.
Changing Oven Light
CAUTION
Be sure the oven is unplugged and all parts are COOL
before replacing the oven light bulb. Do not turn
the oven light on during a self-cleaning cycle. High
temperature will reduce lamp life.
On some models an interior oven light will turn on
automatically when the oven is opened. The oven light
may be turned on when the door is closed by using the
oven light switch located on the Electronic Oven control.
The oven light bulb is covered with a glass shield held
in place by a wire holder. THIS GLASS SHIELD MUST
ALWAYS BE IN PLACE WHEN THE OVEN IS IN USE.
To Replace the Light Bulb:
CAUTION
BE SURE OVEN IS COOL
Door Hinge locations
with oven door fully open
Figure 1
Figure 2
1. Turn the power off at the main source.
2. Wear a leather-faced glove for protection against
possible broken glass.
3. Replace bulb with a 40 Watt appliance bulb only.
4. For self-cleaning oven, press wire holder to one side to
release glass shield, change bulb
and be sure to replace glass shield.
25
Before you call - Solutions to Common Problems
Oven Baking
For best cooking results, heat the oven before baking cookies, breads, cakes, pies or pastries, etc. There is no need to
preheat the oven for roasting meat or baking casseroles.
The cooking times and temperatures needed to bake a product may vary slightly from your previously owned appliance.
Baking Problems and Solutions Chart
Baking
Problems
Causes
Corrections
Cookies and
biscuits burn on
the bottom.
• Cookies and biscuits put into
the oven before the preheating
time is completed.
• Oven rack overcrowded.
• Allow oven to preheat to the selected temperature
before placing food in oven.
• Dark pan absorbs heat too fast.
• Choose pan sizes that will permit 5.1cm to 10.2cm
(2” to 4”) of air space on all sides when placed in
the oven.
• Use a medium-weight aluminum baking sheet.
Cakes too dark on
top or bottom.
• Cakes put into the oven before
preheating time is completed.
• Rack position too high or low.
• Oven too hot.
• Allow oven to preheat to the selected temperature
before placing food in the oven.
• Use proper rack position for baking needs.
• Set oven temperature 25°F/12°C lower than
recommended.
Cakes not done in
the center.
• Oven too hot.
• Set oven temperature 25°F/12°C lower than
recommended.
• Use pan size suggested in recipe.
• Use proper rack position and place pan so there is
5.1cm to 10.2cm (2” to 4”) of space on all sides of
pan.
Cakes not level.
• Range not level.
• Incorrect pan size.
• Pan not centered in oven.
• Pan too close to oven wall or
rack overcrowded.
• Pan warped.
Foods not done
when cooking time
is up.
• Oven too cool.
• Oven overcrowded.
• Oven door opened too
frequently.
26
• Place a marked glass measuring cup filled with
water on the center of the oven rack. If the water
level is uneven, refer to the installation instructions
for leveling the range.
• Be sure to allow 5.1cm to 10.2cm (2” to 4”) of
clearance on all sides of each pan in the oven.
• Do not use pans that are dented or warped.
• Set oven temperature 25°F/12°C higher than
suggested and bake for the recommended time.
• Be sure to remove all pans from the oven except
the ones to be used for baking.
• Open oven door only after shortest recommended
baking time.
Solutions to Common Problems - Before you call
IMPORTANT
Before you call for service, review this list. It may save you time and expense. The list includes common
occurrences that are not the result of defective workmanship or materials in this appliance.
OCCURRENCE
POSSIBLE CAUSE/SOLUTION
Oven Control Beeps
and Displays an “F”
Error Code
Electronic control has detected a fault condition. Push CANCEL pad to clear the display
and stop the display from beeping. Reprogram the oven. If a fault reoccurs, record the fault
number, push the CANCEL pad and contact an authorized servicer.
Faulty Installation
Place oven rack in center of oven. Place a level on the oven rack. Contact installing agent if
rack and cabinet cutout flooring are not level.
Kitchen cabinet misalignment may make oven appear to be not level. Be sure cabinets are
square and level. Contact cabinet maker to correct problem.
Entire Oven Does Not When the oven is first plugged in, or when the power supply to the oven has been interrupted,
Operate
the display will flash. The oven cannot be programmed until the clock is set.
Be sure electrical cord is securely connected into the electrical junction box.
Cord/plug is not installed and/or connected. Cord is not supplied with oven. Contact your
dealer, installing agent or authorized servicer.
Service wiring not complete. Contact your dealer, installing agent or authorized servicer.
Power outage. Check house lights to be sure. Call your local electric company.
Short in cord/plug. Replace cord/plug.
Controls are not set properly. See instructions to set the controls.
House fuse has blown or circuit breaker has tripped immediately following installation.
House fuse may not be fully engaged. Check fuse and screw or engage circuit breaker securely.
Oven Light Does Not
Work
Burned-out or loose bulb. Follow the instructions under Oven Light to replace or tighten the
bulb.
Self-Cleaning Cycle
Does Not Work
Make sure the oven door is closed.
Make sure you have removed the oven racks and the oven rack supports from the oven.
Controls not set properly. Follow instructions under “Using the Self-Clean Feature”.
Oven Smokes
Excessively During
Broiling
Meat too close to the broiler element. Reposition the rack to provide more clearance between
the meat and the broiler. Preheat broil element for quick searing operation.
Meat not properly prepared. Remove excess fat from meat. Cut remaining fatty edges to
prevent curling, but do not cut into the lean.
Grid on broiler pan wrong side-up. Grease does not drain into broiler pan. Always place the grid
on the broiler pan with the ribs up and the slots down to allow grease to drip into the pan.
Broiler pan used without grid or grid cover with aluminum foil. DO NOT use the broiler pan
without the grid or cover the grid with aluminum foil.
Oven needs to be cleaned. Grease has built up on oven surfaces. Regular cleaning is necessary
when broiling frequently. Grease or food spatters cause excessive smoking.
Soil Not Completely
Removed After SelfCleaning Cycle is
Completed
Failure to clean bottom, from top of oven, frame of oven or door area outside oven seal. These
areas are not in the self-cleaning area, but get hot enough to burn on residue. Clean these
areas before the self-cleaning cycle is started. Burned on residue can be cleaned with a stiff
nylon brush and water or a nylon scrubber. Be careful not to damage the oven gasket.
Excessive spillovers in oven. Set the self-clean cycle for longer cleaning time.
Poor Baking Results
Many factors affect baking results. See Baking for hints, causes and corrections. See Adjusting
Oven Temperature.
Flames Inside Oven
or Smoke from Vent
Excessive spillovers in oven. This is normal, especially for high oven temperatures, pie spillovers
or for large amounts of grease on bottom of oven. Wipe up excessive spillovers.
27
MAJOR APPLIANCE WARRANTY
Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux
will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or
workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.
Exclusions This warranty does not cover the following:
1 Products with original serial numbers that have been removed, altered or cannot be readily
determined.
2 Product that has been transferred from its original owner to another party or removed outside the
USA or Canada.
3 Rust on the interior or exterior of the unit.
4 Products purchased "as-is" are not covered by this warranty.
5 Food loss due to any refrigerator or freezer failures.
6 Products used in a commercial setting.
7 Service calls which do not involve malfunction or defects in materials or workmanship, or for
appliances not in ordinary household use or used other than in accordance with the provided
instructions.
8 Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
9 Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards,
shelves, etc., which are not a part of the appliance when it is shipped from the factory.
10Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumable, or
knobs, handles, or other cosmetic parts.
11Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry
trip charges, or mileage expense for service calls to remote areas, including the state of Alaska.
12Damages to the finish of appliance or home incurred during installation, including but not limited to
floors, cabinets, walls, etc.
13Damages caused by: services performed by unauthorized service companies; use of parts other than
genuine Electrolux parts or parts obtained from persons other than authorized service companies; or
external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.
DISCLAIMER OF IMPLIES WARRANTIES; LIMITATION OF REMEDIES
Customer’s sole and exclusive remedy under this limited warranty shall be product repair or
replacement as provided herein. Claims based on implied warranties, including warranties of
merchantability or fitness for particular purpose, are limited to one year or the shortest period
allowed by law, but not less than one year. Electrolux shall not be liable for consequential or
incidental damages such as property damage and incidental expenses resulting from any breach
of this written limited warranty or any implied warranty. Some states and provinces do not allow
the exclusion or limitation of incidental or consequential damages, or limitations on the duration of
implied warranties, so these limitations or exclusions may not imply to you. This written warranty
gives you specific legal rights. You may also have other rights that vary from state to state.
If You
Need
Service
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period
should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.
Service under this warranty must be obtained contacting Electrolux at the addresses or phone numbers
below.
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major
Appliances North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by
Electrolux Canada Corp. Electrolux authorizes no person to change or add to any obligations under this warranty.
Obligations for service and parts under this warranty must be performed by Electrolux or an authorized service
company. Product features or specifications as described or illustrated are subject to change without notice.
USA
1.800.944.9044
Electrolux Major Appliances
North America
P.O. Box 212378
Augusta, GA 30907
28
Canada
1.800.265.8352
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada
L5V 3E4
Download PDF

advertising