Operating instructions | Bolens 149-822-000 Lawn Mower User Manual

Heated Display Cases
®
Full Service or Self Service
Models:
HN2-48; HN2SYS-48
HN2-48/P; HN2SYS-48/P
HN2SYS-48
HN2-48
HN2SYS-72
HN2-72; HN2SYS-72
HN2-72/P; HN2SYS-72/P
HN2-72/PL; HN2SYS-72/PL
HN2-72/PR; HN2SYS-72/PR
HN2-96; HN2SYS-96
HN2-96/PL; HN2SYS-96/PL
HN2-96/PR; HN2SYS-96/PR
HN2-72
• INSTALLATION
HN2SYS-96
HN2-96
• OPERATION
• MAINTENANCE
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 USA
PHONE: 262.251.3800 • 800.558.8744 USA / CANADA
FAX: 262.251.7067 • 800.329.8744 U . S . A .
www.alto-shaam.com
PRINTED IN U.S.A.
ONLY
MN-28883 • 05/08
®
DELIVERY
U N PA C K I N G
This Alto-Shaam appliance has been
thoroughly tested and inspected to insure only the
highest quality unit is provided. Upon receipt,
check for any possible shipping damage and report
it at once to the delivering carrier. See
Transportation Damage and Claims section
located in this manual.
This appliance, complete with unattached
items and accessories, may have been delivered in
one or more packages. Check to ensure that all
standard items and options have been received
with each model as ordered.
Save all the information and instructions
packed with the appliance. Complete and return
the warranty card to the factory as soon as
possible to assure prompt service in the event of a
warranty parts and labor claim.
This manual must be read and understood by
all people using or installing the equipment
model. Contact the Alto-Shaam service
department if you have any questions concerning
installation, operation, or maintenance.
NOTE: All claims for warranty must include the
full model number and serial number of
the unit.
1. Carefully remove the
appliance from the
carton or crate.
NOTE: Do not discard the
carton and other
packaging material
until you have
inspected the unit
for hidden damage
and tested it for
proper operation.
®
®
2. Read all instructions in this manual carefully
before initiating the installation of this appliance.
DO NOT DISCARD THIS MANUAL.
This manual is considered to be part of the
appliance and is to be provided to the owner or
manager of the business or to the person
responsible for training operators. Additional
manuals are available from the Alto-Shaam
service department.
3. Remove all protective plastic film, packaging
materials, and accessories from the appliance
before connecting electrical power. Store any
accessories in a convenient place for future use.
H N 2 & H N 2S Y S Series Operation & Care Manual • 1
SAFETY PROCEDURES
AND PRECAUTIONS
Knowledge of proper procedures is essential to the
safe operation of electrically and/or gas energized
equipment. In accordance with generally accepted
product safety labeling guidelines for potential
hazards, the following signal words and symbols
may be used throughout this manual.
DANGER
Used to indicate the presence of a
hazard that WILL cause severe
personal injury, death, or substantial
property damage if the warning
included with this symbol is ignored.
WA R N I N G
Used to indicate the presence of a
hazard that CAN cause personal injury,
possible death, or major property
damage if the warning included with
this symbol is ignored.
1. This appliance is intended to hold or process
foods for the purpose of human consumption.
No other use for this appliance is authorized
or recommended.
2. This appliance is intended for use in commercial
establishments where all operators are familiar
with the purpose, limitations, and associated
hazards of this appliance. Operating
instructions and warnings must be read and
understood by all operators and users.
3. Any troubleshooting guides, component views,
and parts lists included in this manual are for
general reference only and are intended for use
by qualified technical personnel.
4. This manual should be considered a permanent
part of this appliance. This manual and all
supplied instructions, diagrams, schematics,
parts lists, notices, and labels must remain with
the appliance if the item is sold or moved to
another location.
CAUTION
Used to indicate the presence of a
hazard that can or will cause minor or
moderate personal injury or property
damage if the warning included with
this symbol is ignored.
CAUTION
Used to indicate the presence of a hazard that can
or will cause minor personal injury, property
damage, or a potential unsafe practice if the
warning included with this symbol is ignored.
NOTE
For equipment delivered for use
in any location regulated by the
following directive:
DO NOT DISPOSE OF ELECTRICAL
OR ELECTRONIC EQUIPMENT WITH
OTHER MUNICIPAL WASTE.
N O T E : Used to notify personnel of
installation, operation, or
maintenance information that is
important but not hazard related.
H N 2 & H N 2S Y S Seri es Operation & Care Manual • 2
I N S TA L L AT I O N
DANGER
IMPROPER INSTALLATION,
ALTERATION, ADJUSTMENT,
SERVICE, OR MAINTENANCE COULD
RESULT IN SEVERE INJURY, DEATH
OR CAUSE PROPERTY DAMAGE.
READ THE INSTALLATION,
OPERATING AND MAINTENANCE
INSTRUCTIONS THOROUGHLY
BEFORE INSTALLING OR SERVICING
THIS EQUIPMENT.
CAUTION
METAL PARTS OF THIS EQUIPMENT
BECOME EXTREMELY HOT WHEN IN
OPERATION. TO AVOID BURNS,
ALWAYS USE HAND PROTECTION
WHEN OPERATING THIS APPLIANCE.
CAUTION
TO PREVENT PERSONAL INJURY,
USE CAUTION WHEN MOVING OR
LEVELING THIS APPLIANCE.
S I T E I N S TA L L AT I O N
In order to maintain
established National
Sanitation Foundation
standards, all
stationary floor models
must be sealed to the
floor with a R.T.V. or
silastic meeting N.S.F.
requirements or
have 6" (152mm)
unobstructed clearance
beneath the unit.
®
1. The appliance must
be installed on a
stable and level surface.
A number of adjustments are associated with
initial installation and start-up. It is important
that these adjustments be conducted by a
qualified service technician. Installation and
start-up adjustments are the responsibility of the
dealer or user. These adjustments include but are
not limited to thermostat calibration, door
adjustment, leveling, electrical hook-up and
installation of optional casters or legs.
LEVELING
2. DO NOT install this appliance in any area where it
may be affected by any adverse conditions such as
steam, grease, dripping water, high temperatures, or
any other severely adverse conditions.
Level the appliance
from side-to-side and front-to-back with the
use of a spirit level.
4. This appliance must be kept free and clear of
any obstructions blocking access for maintenance
or service.
NOTE: Failure to properly level this appliance
can cause improper function.
3. DO NOT install a heated display case near a cold air
source such as a freezer, air conditioning vents, or
in any area where outside air fluctuation can
affect performance.
We recommend checking the level periodically to
make certain the floor has not shifted nor the
appliance moved.
MINIMUM CLEARANCE REQUIREMENTS
Counter and table units must be mounted on legs
of a sufficient 4" (102mm) height to provide
minimum unobstructed space beneath the unit.
These legs are supplied with the unit. Warranty
will become null and void if these directions are
not followed.
H N 2 & H N 2S Y S Series Operation & Care Manual • 3
I N S TA L L AT I O N
S I T E I N S TA L L AT I O N
HN2 & HN2SYS SERIES
37-3/4" (958mm)
37-3/4" (958mm)
3-1/8"
(77mm)
ELECTRICAL CORD
14-15/16"
(378mm)
52-3/8" (1328mm)
51-3/4" (1312mm)
41-15/16" (1065mm)
13-1/2"
(344mm)
6-13/16"
(172mm)
HN2 PROFILE
3" (76mm) ADJUSTABLE
PEGS IN EACH CORNER
HN2SYS-48
48" (1219mm)
3" (76mm) ADJUSTABLE
PEGS IN EACH CORNER
HN2SYS-72
72" (1829mm)
14-15/16"
(378mm)
30-3/4" (781mm)
37-3/4" (958mm)
3-1/8"
(77mm)
ELECTRICAL CORD
14-15/16"
(378mm)
52-3/8" (1328mm)
HN2SYS PROFILE
6-13/16"
(172mm)
3" (76mm) ADJUSTABLE
PEGS IN EACH CORNER
HN2SYS-96
96" (2438mm)
H N 2 & H N2S Y S Series Operation & Care Manual• 4
28-1/8" (713mm)
6-13/16"
(172mm)
28-5/8" (726mm)
52-3/8" (1328mm)
37-3/4" (958mm)
3-1/8"
(77mm)
ELECTRICAL CORD
14-15/16"
(378mm)
52-3/8" (1328mm)
51-3/4" (1312mm)
41-15/16" (1065mm)
I N S TA L L AT I O N
ELECTRICAL CONNECTION
The appliance must be installed by a qualified
service technician. The oven must be properly
grounded in accordance with the National
Electrical Code and applicable local codes.
DANGER
To avoid electrical shock, this
appliance MUST be adequately
grounded in accordance with local
electrical codes or, in the absence of
local codes, with the current edition
of the National Electrical Code
ANSI/NFPA No. 70. In Canada, all
electrical connections are to be
made in according with CSA C22.1,
Canadian Electrical Code Part 1 or
local codes.
Plug the unit into a properly grounded receptacle
ONLY, positioning the unit so that the plug is
easily accessible in case of an emergency. Arcing
will occur when connecting or disconnecting the
unit unless all controls are in the “ OFF ” position.
ELECTRICAL
VOLTAGE
120/208-240 ( AGENCY )
AT
AT
230
208
240
( AGENCY )
230
VOLTAGE
120/208-240 ( AGENCY )
AT
AT
230
208
240
( AGENCY )
230
VOLTAGE
120/208-240 ( AGENCY )
AT
AT
230
208
240
( AGENCY )
230
PHASE CYCLE / HZ AMPS
1
1
1
1
1
50/60
50/60
50/60
50/60
50/60
13.8
11.6
13.0
12.6
12.6
PHASE CYCLE / HZ AMPS
1
1
1
1
1
KW
3.3 NEMA L 14-20 P
2.5
20A, 250V PLUG
3.1
2.9
2.9
KW
50/60 18.75 4.5
NEMA L 14-30 P
50/60 19.0 4.6
30A, 250V PLUG
50/60 19.0 4.6
18.3
18.4
4.2
4.2
PHASE CYCLE / HZ AMPS
KW
1
1
1
1
1
BARE END , NO PLUG
50/60
50/60
50/60
50/60
50/60
50/60
50/60
24.0
24.0
24.0
24.3
24.7
BARE END , NO PLUG
5.2
NEMA L 14-30 P
5.2
30A, 250V PLUG
5.2
5.6
5.7
BARE END , NO PLUG
Proper receptacle or outlet configuration or
permanent wiring for this unit must be installed
by a licensed electrician in accordance with
applicable local electrical codes.
DANGER
ELECTRICAL CONNECTIONS MUST
BE MADE BY A QUALIFIED SERVICE
TECHNICIAN IN ACCORDANCE WITH
APPLICABLE ELECTRICAL CODES.
DANGER
ENSURE POWER SOURCE
MATCHES VOLTAGE STAMPED
ON APPLIANCE NAMEPLATE.
REGARDING INTERNATIONAL
STANDARD UNITS:
If the unit is not equipped with flexible cord
with plug, an all-pole country approved
disconnection device which has a contact
separation of at least 3mm in all poles must be
incorporated in the fixed wiring for disconnection.
When using a cord without a plug, the
green/yellow conductor shall be connected to the
terminal which is marked with the ground symbol.
If a plug is used, the socket outlet must be easily
accessible. If the power cord needs replacement,
use a similar one obtained from the distributor.
For 230V units: To prevent an electrical shock
hazard between the appliance and other
appliances or metal parts in close vicinity, an
equalization-bonding stud is provided. An
equalization bonding lead must be connected to
this stud and the other appliances / metal parts
to provide sufficient protection against potential
difference. The terminal is marked with the
following symbol.
H N 2 & H N 2S Y S Series Operation & Care Manual • 5
I N S TA L L AT I O N
HN2 & HN2SY S SERIES — OPTIONS & ACCESSORIES
DESCRIPTION
HN2-48 SERIES
HN2-72 SERIES
HN2-96 SERIES
AVAILABLE
AVAILABLE
AVAILABLE
GAUGE, INTERIOR AMBIENT TEMPERATURE
GU-33384
GU-33384
GU-33384
GLASS, TEMPERED END PANE, BRONZE KIT
5008529
5008529
5008529
INDEPENDENT ELECTRICAL OUTLET
5001781
5001781
5001781
BRUSHED STAINLESS STEEL
5004595
5004596
5004597
CUSTOM COLOR
5004598
5004599
5004600
BRUSHED STAINLESS STEEL
5004601
5004602
5004603
CUSTOM COLOR
5004604
5004605
5004606
4" (102mm) DEEP
1001990
1001991
—
55265
55265
55265
HN-48, -48/P
5002802
—
—
HN2-72, -72/P
—
5002803
—
HN2-72/PL, -72/PR
—
5002804
—
HN2-96
—
—
5002805
HN2-96/PL, -96/PR
—
—
5002806
5004916
5004917
5004918
5007660 (2 REQ'D)
5007660 (2 REQ'D)
5007660 (3 REQ'D)
5005638
—
—
HN2-72, -72/P, -72/PL, -72/PR
—
5005639
—
HN2-96, -96/P, -96/PL,-96/PR
—
—
5005640
BUTTING KIT
PANEL KIT, COUNTER TOP
PANEL KIT, SYSTEM
PAN INSERT, SELF SERVICE
PLATFORM SCALE
SHEET PAN DIVIDER BAR PACKAGE
TEMPERATURE PROBE
THERMOSTAT GUARD COVER PLATE
WORK SHELF WITH GRAVY LANE
HN2-48, -48/P
H N 2 & H N2S Y S Series Operation & Care Manual• 6
O P E R AT I N G I N S T R U C T I O N S
U S E R S A F E T Y I N F O R M AT I O N
CAUTION
METAL PARTS OF THIS EQUIPMENT
BECOME EXTREMELY HOT WHEN IN
OPERATION. TO AVOID BURNS,
ALWAYS USE HAND PROTECTION
WHEN OPERATING THIS APPLIANCE.
The Alto-Shaam heated display case is intended
for use in commercial establishments by qualified
operating personnel where all operators are
familiar with the purpose, limitations, and
associated hazards of this appliance. Operating
instructions and warnings must be read and
understood by all operators and users.
WA R N I N G
Hood glass extended to the full,
upright portion is stabilized through
the use of gas struts designed for
the full, load-bearing weight. These
struts could weaken or fail due to
wear, environmental conditions or
aging. OPERATORS SHOULD BE
AWARE OF ANY DECREASE IN
EFFORT TO LIFT THE HOOD AND
INITIATE AN IMMEDIATE GAS STRUT
SAFETY CHECK. DO NOT LIFT THE
HOOD IN THIS CONDITION.
S TA R T- U P O P E R AT I O N
BEFORE INITIAL USE:
Interior display case surfaces must be heated to
remove surface oils and the accompanying odor
produced during the first use of the appliance.
Remove pans. Turn thermostats to the “ON”
position. Set thermostats to the 10 setting. Allow
the unit to heat for 30 minutes or until no odor
is detected.
PREHEATING:
The unit should be preheated at the 10 setting
for a minimum of 30-45 minutes before loading
the case with hot food. Follow the operating
instructions indicated on the next page of
this manual.
DANGER
DANGER
DISCONNECT UNIT FROM
POWER SOURCE BEFORE
CLEANING OR SERVICING.
AT NO TIME SHOULD THE INTERIOR
OR EXTERIOR BE STEAM CLEANED,
HOSED DOWN, OR FLOODED WITH
WATER OR LIQUID SOLUTION OF
ANY KIND. DO NOT USE WATER JET
TO CLEAN.
SEVERE DAMAGE OR
ELECTRICAL HAZARD
COULD RESULT.
WARRANTY BECOMES VOID IF
APPLIANCE IS FLOODED
H N 2 & H N 2S Y S Series Operation & Care Manual • 7
O P E R AT I N G I N S T R U C T I O N S
O P E R AT I N G P R O C E D U R E S
1. DO NOT ADD WATER TO DISPLAY CASE
Halo Heat display cases maintain a constant but
gentle temperature and eliminate much of the
moisture loss associated with conventional display
cases. Because of this gentle heat, it is not necessary
to add water to the display case. As a matter of fact,
adding water is not recommended since water will
accelerate the deterioration of the product, and may
damage the unit voiding the warranty.
2. PLACE DIVIDERS AND SERVING
PANS IN CASE
Refer to the pan layout diagrams for different
types of pan accommodations. A complete pan
configuration layout is located in this manual. It
is VERY important to note, no matter what type
of pan configuration chosen, pan separator bars
or divider bars must be used to close all gaps
between pans, and all gaps between the pans
and the edges of the display case. If these gaps
are not closed, heat will escape from the bottom of
the case into the display area. As a consequence,
heat distribution will be uneven and uniform
temperature will be difficult to hold. If needed,
additional pan divider bars are available. The
supplied self-serve pan inserts with wire grids are
for use with pre-packaged foods in the self-serve
sections of the units.
3. TURN DISPLAY LIGHTS “ON” AND SET
THE THERMOSTAT(S) AT NUMBER “10”
TO PREHEAT
A indicator light will illuminate when the
thermostat(s) is (are) turned “ON.” The
indicator(s) will remain lit as long as the unit is
preheating or calling for heat. The unit should be
preheated at the 10 setting for a minimum of
30-45 minutes before loading the case with hot
food. When preheating is completed, or whenever
the unit reaches any temperature set by the
operator between 1 and 10, the indicator light(s)
will go “OUT”.
4. LOAD HOT FOODS INTO DISPLAY CASE
Be certain only hot food is transferred into the
display case. Before loading food into the case,
use a pocket-type meat thermometer to make
certain all products have reached an internal
temperature of 140° to 160° F (60° to 71°C). If any
food product is not at proper serving temperature,
use a Halo Heat cooking and holding oven, set at
250° to 275°F (121° to 135°C), or a Combitherm
oven to bring the product within the correct
temperature range.
Use hand protection when handling hot items.
Be certain only hot PREPACKAGED foods in
appropriate heat tested containers are used in
the self-service section of the display case.
Do not stack food containers.
5. RESET THERMOSTAT(S) AS NEEDED
After all products are loaded into the display case
and the doors are closed, it is necessary to reset
the thermostat(s). For fully enclosed sections, reset
the thermostat to the number “8” setting. Cases
with a self-service section should be maintained
between number “9” and number “10” for the
self-service section only. THESE SETTINGS WILL
NOT NECESSARILY BE FINAL. Since proper
temperature range depends on the type of
products and the quantities being held, it is
necessary to periodically use a pocket
thermometer to check each item to make certain
the correct temperatures are being maintained.
Proper temperature range is between a minimum
of 140° and 160°F (60° and 71°C). Normally, this
will require a thermostat setting of between
number “6” and “8” in fully enclosed cases. Selfservice cases or sections will always require a
higher thermostat setting.
6. PLACEMENT OF FOOD PROBE
If the unit is equipped with the probe accessory,
wipe each probe and probe tip with a disposable
alcohol pad to clean and sanitize before using. If
the probe is left in its bracket, the LED
temperature display will indicate the ambient air
temperature inside the case. To place a probe into
food kept in the case, remove the probe from the
bracket and push the probe tip halfway into the
product, positioning the tip at the center of the
food mass. If placing into solid foods such as
meat roast or poultry breasts, push the probe in
from a straight downward position or in from the
side to the center position. If placing into a
semi-liquid or liquid product, the probe cable will
probably need to be secured to keep the probe
positioned properly. Do not let the probe tip
touch the edges or sides. Tape the probe cable to
the lip or edge of the container. Wipe each probe
tip with a clean paper towel to remove food debris
after each use. Follow by wiping probes with a
disposable alcohol pad, and return each probe to
the proper bracket position.
7. SERVE FRESH HOT FOOD
Keep hot foods looking fresh. Occasionally stir
or rotate food as needed. Serve food products in
appropriate heat tested packages or containers.
Keep display case doors closed after serving.
Wipe spills immediately to assure maximum eye
appeal and to ease end of the day cleanup.
H N 2 & H N 2S Y S Seri es Operation & Care Manual • 8
O P E R AT I N G I N S T R U C T I O N S
Indicator Lights
LI-3027
Cutting Board
Bracket
BT-2342
OR
LI-3951
Light Switch
Thermostats
SW-33896
TT-3498
Light Switch
SW-33896
Thermostats
Cutting Board
Bracket
BT-2342
TT-3498
OPERATOR/CONTROL SIDE WITH CUTTING BOARD
Electrical Cord
CD-3291
OR
CD-3557
Cutting Board
Thermostat
TT-3498
HN2-48, HN2SYS-48 – 4016 (1)
HN2-72, HN2SYS-72 – 4017 (1)
HN2-96, HN2SYS-96 – 4016 (2)
H N 2 & H N 2S Y S Series Operation & Care Manual • 9
Plug ( NOT SHOWN )
HN2-48 – PG-3337
HN2-72, -96 – PG-3267
O P E R AT I N G I N S T R U C T I O N S
PA N C O N F I G U R AT I O N S • H E AT E D D I S P L AY C A S E S
96 MODELS
72 MODELS
48 MODELS
5 PAN ZONES
3 PAN ZONES
ONE-HALF
SIZE PAN
FULL-SIZE
PAN
GN 1/1
ONE-HALF
SIZE PAN
ONE-THIRD
SIZE PAN
GN 1/3
ONE-THIRD
SIZE PAN
ONE-THIRD
SIZE PAN
TWO-THIRDS
SIZE PAN
GN 2/3
ONE-THIRD
SIZE PAN
ONE-THIRD
SIZE PAN
ONE-THIRD
SIZE PAN
ONE-THIRD
SIZE PAN
ONE-THIRD
SIZE PAN
— 48 MODELS: Up to 12 One-Third Size Pans per display case
Four (4) ONE-THIRD SIZE PAN per pan zone.
— 72 MODELS: Up to 20 One-Third Size Pans per display case
— 96 MODELS: Up to 28 One-Third Size Pans per display case
— 48 MODELS: Up to 3 Two-Thirds Size Pans with 6 One-Third Size Pans per display case
One (1) TWO-THIRDS SIZE PAN and two (2) ONE-THIRD SIZE PANS per pan zone.
— 96 MODELS: Up to 7 Two-Thirds Size Pans with 14 One-Third Size Pans per display case
— 72 MODELS: Up to 5 Two-Thirds Size Pans with 10 One-Third Size Pans per display case
— 48 MODELS: Up to 6 One-Half Size Pans with 3 One-Third Size Pans per display case
One (1) FULL-SIZE PAN and one (1) ONE-THIRD SIZE PAN per pan zone.
— 96 MODELS: Up to 7 One-Half Size Pans with 7 One-Third Size Pans per display case
— 72 MODELS: Up to 5 One-Half Size Pans with 5 One-Third Size Pans per display case
— 48 MODELS: Up to 3 Full-Size Pans with 3 One-Third Size Pans per display case
One (1) FULL-SIZE PAN and one (1) ONE-THIRD SIZE PAN per pan zone.
— 96 MODELS: Up to 7 Full-Size Pans with 7 One-Third Size Pans per display case
— 72 MODELS: Up to 5 Full-Size Pans with 5 One-Third Size Pans per display case
PART NO.
GN 1/2
7 PAN ZONES
NOTE: ADDITIONAL PAN SEPARATOR
BARS MAY BE REQUIRED
TO ACCOMMODATE
MAXIMUM CAPACITIES.
STANDARD PAN SIZES
FULL-SIZE PAN*
GN1/1
12" x 20" x 2-1/2"
(325mm x 530mm x 65mm)
ONE-HALF SIZE PAN*
GN1/2
12" x 10" x 2-1/2"
(325mm x 265mm x 65mm)
TWO-THIRDS SIZE PAN* GN2/3
12" x 14" x 2-1/2"
(325mm x 352mm x 65mm)
ONE -THIRD SIZE PAN*
GN1/3
12" x 6" x 2-1/2"
(325mm x 176mm x 65mm)
*Will also accept 4" (100mm) pans.
STANDARD PAN DIVIDER AND SEPARATOR BARS
DESCRIPTION
DIMENSIONS (W X L)
48
72
96
1002584
FULL, HALF AND THIRD SIZE-LONG
2-1/2" x 28" (64mm x 711mm)
4
4
—
1002590
FULL, HALF AND THIRD SIZE-LONG
1-13/16" x 28" (46mm x 711mm)
—
—
6
1002621
FULL, HALF AND THIRD SIZE-SHORT
1-15/32" x 13-1/2" (37mm x 343mm)
3
5
7
11318
FULL, HALF AND THIRD SIZE-SHORT
1" x 13-1/2" (25mm x 343mm)
9
15
21
H N 2 & H N 2S YS Series Operation & Care Manual • 10
O P E R AT I N G I N S T R U C T I O N S
PA N C O N F I G U R AT I O N S • S E L F - S E R V E H E AT E D D I S P L AY C A S E S
96 MODELS
72 MODELS
(96-/PL & 96-/PR)
(72-/PL & 72-/PR)
5 PAN ZONES
3 PAN ZONES
ONE-HALF
SIZE PAN
ONE -THIRD SIZE PAN*
GN1/3
12" x 6" x 2-1/2"
(325mm x 176mm x 65mm)
SHEET PANS
(NOT SHOWN)
➔
*Will also accept 4" (100mm) pans.
PART NO.
ONE-THIRD
SIZE PAN
ONE-THIRD
SIZE PAN
ONE-THIRD
SIZE PAN
ONE-THIRD
SIZE PAN
➔
TWO-THIRDS SIZE PAN* GN2/3
12" x 14" x 2-1/2"
(325mm x 352mm x 65mm)
ONE-THIRD
SIZE PAN
Four (4) ONE-THIRD SIZE PANS per pan zone.
— 72 MODELS: Up to 12 One-Third Size Pans
per display case
— 96 MODELS: Up to 20 One-Third Size Pans
per display case
ONE-HALF SIZE PAN*
GN1/2
12" x 10" x 2-1/2"
(325mm x 265mm x 65mm)
GN 2/3
One (1) TWO-THIRD SIZE PANS and
Two (2) ONE-THIRD SIZE PANS per pan zone
— 72 MODELS: Up to 3 Two-Thirds Size Pans with 6
One-Third Size Pans per display case
— 96 MODELS: Up to 5 Two-Thirds Size Pans with 10
One-Third Size Pans per display case
FULL-SIZE PAN*
GN1/1
12" x 20" x 2-1/2"
(325mm x 530mm x 65mm)
ONE-THIRD
SIZE PAN
Two (2) ONE-HALF SIZE PANS and
One (1) ONE-THIRD SIZE PANS per pan zone
— 72 MODELS: Up to 6 One-Half Size Pans with 3
One-Third Size Pans per display case
— 96 MODELS: Up to 10 One-Half Size Pans with 5
One-Third Size Pans per display case
STANDARD PAN SIZES
One (1) FULL-SIZE PANS and
One (1) ONE-THIRD SIZE PANS per pan zone
— 72 MODELS: Up to 3 Full-Size Pans with 3 OneThird Size Pans per display case
— 96 MODELS: Up to 5 Full-Size Pans with 5 OneThird Size Pans per display case
➔
ONE-THIRD
SIZE PAN
GN 1/3
ONE-HALF
SIZE PAN
➔
GN 1/1
PAN SIZE: ITEM #1000521
21-5/8" x 26-3/8 x 2"
(549mm x 670 mm x 51mm)
ONE-THIRD
SIZE PAN
➔
GN 1/2
FULL-SIZE
PAN
SELF-SERVE
PAN ZONE
TWO-THIRDS
SIZE PAN
FULL-SIZE SHEET PANS: 18" x 26" x 1"
— 72 MODELS: 2 Sheets Pans per display case
— 96 MODELS: 3 Sheets Pans per display case
STANDARD PAN DIVIDER AND SEPARATOR BARS
DESCRIPTION
DIMENSIONS (W X L)
72
96
1002584
FULL, HALF AND THIRD SIZE-LONG
2-1/2" x 28" (64mm x 711mm)
4
—
1002590
FULL, HALF AND THIRD SIZE-LONG
1-13/16" x 28" (46mm x 711mm)
—
6
1002621
FULL, HALF AND THIRD SIZE-SHORT
1-15/32" x 13-1/2" (37mm x 343mm)
5
7
11318
FULL, HALF AND THIRD SIZE-SHORT
1" x 13-1/2" (25mm x 343mm)
15
21
H N 2 & H N 2S Y S Series Operation & Care Manual • 11
O P E R AT I N G I N S T R U C T I O N S
1002585
1000544
1002619
MODEL >
DESCRIPTION
INTERNATIONAL PAN DIVIDER KIT
48
72
96
PA R T N O .
QTY
PA R T N O .
QTY
PA R T N O .
QTY
5009135
1
5009136
1
5009137
1
BARS INCLUDED IN EACH KIT
PA R T N O .
DESCRIPTION
D I M E N S I O N S (W X L)
48
72
96
58 mm x 711 mm
4
4
—
1002585
GN 1/1, GN 1/2, GN 1/3 - Long
1002591
GN 1/1, GN 1/2, GN 1/3 - Long
41 mm x 711 mm
—
—
6
1002619
GN 1/4
25 mm x 270 mm
6
10
14
1000544
GN 1/1, GN 1/2, GN 1/3 - Short
25 mm x 327 mm
9
15
21
1002619 (1)
1000544 (5)
1002585 (4)
H N 2 & H N 2S YS Series Operation & Care Manual • 12
O P E R AT I N G I N S T R U C T I O N S
GENERAL HOLDING GUIDELINES
Chefs, cooks and other specialized food service
personnel employ varied methods of cooking. Proper
holding temperatures for a specific food product must
be based on the moisture content of the product,
product density, volume, and proper serving
temperatures. Safe holding temperatures must also be
correlated with palatability in determining the length
of holding time for a specific product.
Halo Heat maintains the maximum amount of product
moisture content without the addition of water, water
vapor, or steam. Maintaining maximum natural
product moisture preserves the natural flavor of the
product and provides a more genuine taste. In
addition to product moisture retention, the gentle
properties of Halo Heat maintain a consistent
temperature throughout the cabinet without the
necessity of a heat distribution fan, thereby
preventing further moisture loss due to evaporation
or dehydration.
When product is removed from a high temperature
cooking environment for immediate transfer into
equipment with the lower temperature required for
hot food holding, condensation can form on the
outside of the product and on the inside of plastic
containers used in self-service applications. Allowing
the product to release the initial steam and heat
produced by high temperature cooking can alleviate
this condition. To preserve the safety and quality of
freshly cooked foods however, a maximum of 1 to 2
minutes must be the only time period allowed for the
initial heat to be released from the product.
The unit is equipped with a thermostat indicating a
range of between 1 and 10. Use a metal-stemmed
indicating thermometer to measure the internal
temperature of the product(s) being held. Adjust the
thermostat setting to achieve the best overall setting
based on internal product temperature.
H O L D I N G T E M P E R AT U R E R A N G E
MEAT
FAHRENHEIT
CELSIUS
BEEF ROAST — Rare
130°F
54°C
BEEF ROAST — Med/Well Done
155°F
68°C
BEEF BRISKET
160° — 175°F
71° — 79°C
CORN BEEF
160° — 175°F
71° — 79°C
PASTRAMI
160° — 175°F
71° — 79°C
PRIME RIB — Rare
STEAKS — Broiled/Fried
RIBS — Beef or Pork
130°F
54°C
140° — 160°F
60° — 71°C
160°F
71°C
VEAL
160° — 175°F
71° — 79°C
HAM
160° — 175°F
71° — 79°C
PORK
160° — 175°F
71° — 79°C
LAMB
160° — 175°F
71° — 79°C
CHICKEN — Fried/Baked
160° — 175°F
71° — 79°C
DUCK
160° — 175°F
71° — 79°C
TURKEY
160° — 175°F
71° — 79°C
GENERAL
160° — 175°F
71° — 79°C
FISH — Baked/Fried
160° — 175°F
71° — 79°C
LOBSTER
160° — 175°F
71° — 79°C
SHRIMP — Fried
160° — 175°F
71° — 79°C
120° — 140°F
49° — 60°C
160° — 175°F
71° — 79°C
80° — 100°F
27° — 38°C
EGGS —Fried
150° — 160°F
66° — 71°C
FROZEN ENTREES
160° — 175°F
71° — 79°C
HORS D'OEUVRES
160° — 180°F
71° — 82°C
PASTA
160° — 180°F
71° — 82°C
PIZZA
160° — 180°F
71° — 82°C
POULTRY
FISH/SEAFOOD
BAKED GOODS
BREADS/ROLLS
MISCELLANEOUS
CASSEROLES
DOUGH — Proofing
POTATOES
180°F
82°C
PLATED MEALS
140° — 165°F
60°— 74°C
SAUCES
140° — 200°F
60° — 93°C
SOUP
140° — 200°F
60° — 93°C
VEGETABLES
160° — 175°F
71° — 79°C
THE HOLDING TEMPERATURES LISTED ARE SUGGESTED
GUIDELINES ONLY. ALL FOOD HOLDING SHOULD BE BASED ON
INTERNAL PRODUCT TEMPERATURES . ALWAYS FOLLOW LOCAL
HEALTH ( HYGIENE ) REGULATIONS FOR ALL INTERNAL
TEMPERATURE REQUIREMENTS .
H N 2 & H N 2S Y S Series Operation & Care Manual • 13
CARE AND CLEANING
CLEANING AND PREVENTIVE MAINTENANCE
PROTECTING STAINLESS STEEL SURFACES
It is important to guard against
corrosion in the care of
stainless steel surfaces.
Harsh, corrosive, or
inappropriate chemicals can
completely destroy the
protective surface layer of stainless steel.
Abrasive pads, steel wool, or metal implements
will abrade surfaces causing damage to this
protective coating and will eventually result in
areas of corrosion. Even water, particularly hard
water that contains high to moderate
concentrations of chloride, will cause oxidation
and pitting that result in rust and corrosion. In
addition, many acidic foods spilled and left to
remain on metal surfaces are contributing factors
that will corrode surfaces.
Proper cleaning agents, materials, and
methods are vital to maintaining the appearance
and life of this appliance. Spilled foods should be
removed and the area wiped as soon as possible
but at the very least, a minimum of once a day.
Always thoroughly rinse surfaces after using a
cleaning agent and wipe standing water as quickly
as possible after rinsing.
CLEANING AGENTS
Use non-abrasive cleaning products designed for
use on stainless steel surfaces. Cleaning agents
must be chloride-free compounds and must not
contain quaternary salts. Never use hydrochloric
acid (muriatic acid) on stainless steel surfaces.
Always use the proper cleaning agent at the
manufacturer's recommended strength.
Contact your local cleaning supplier for
product recommendations.
CLEANING MATERIALS
The cleaning function can usually be accomplished
with the proper cleaning agent and a soft, clean
cloth. When more aggressive methods must be
employed, use a non-abrasive scouring pad on
difficult areas and make certain to scrub with the
visible grain of surface metal to avoid surface
scratches. Never use wire brushes, metal scouring
pads, or scrapers to remove food residue.
BRU
S
IRE
EL PA
STE
DS
NO
W
S
HE
NO
SCR APER
O
S
N
CAUTION
TO PROTECT STAINLESS STEEL
SURFACES, COMPLETELY AVOID
THE USE OF ABRASIVE CLEANING
COMPOUNDS, CHLORIDE BASED
CLEANERS, OR CLEANERS
CONTAINING QUATERNARY SALTS.
NEVER USE HYDROCHLORIC ACID
(MURIATIC ACID) ON STAINLESS
STEEL. NEVER USE WIRE
BRUSHES, METAL SCOURING
PADS OR SCRAPERS.
H N 2 & H N 2S YS Series Operation & Care Manual • 14
CARE AND CLEANING
EQUIPMENT CARE
Under normal circumstances, this
appliance should provide you with
long and trouble free service. There
is no preventative maintenance
required, however, the following
Equipment Care Guide will maximize the potential
life and trouble free operation of this appliance. The
cleanliness and appearance of this equipment will
contribute considerably to operating efficiency and
savory, appetizing food. Good equipment that is
kept clean works better and lasts longer.
CLEAN THE PROBES DAILY
If the display case is supplied with
probes, remove all food soil from
probes. Wipe entire probe and
cable assembly with warm detergent
solution and a clean cloth. Remove
detergent by wiping each probe and
cable with clean rinse water and a cloth.
Wipe probes with disposable alcohol pad
or sanitizing solution recommended for food contact
surfaces. Allow probe and cable to air dry in probe
holding bracket.
CLEAN DAILY
A. Turn lights and adjustable thermostat(s) to the
“OFF” position, and disconnect unit from
power source.
B. Remove, cover or wrap, and store unused
products under refrigeration.
C. Clean the interior metal surfaces of the cabinet
with a damp clean cloth and any good
commercial detergent or grease solvent at the
recommended strength. Use a plastic scouring
pad or oven cleaner for difficult areas. Rinse
well to remove all residue and wipe dry.
NOTE: Avoid the use of abrasive cleaning
compounds, chloride based cleaners, or
cleaners containing quaternary salts. Never
use hydrochloric acid (muriatic acid) on
stainless steel.
D. Clean the glass with a window cleaner. The
sliding glass doors are removable allowing for
easier cleaning.
E. To help maintain the protective film coating on
polished stainless steel, clean the exterior of
the unit with a cleaner recommended for
stainless steel surfaces. Spray the cleaning
agent on a clean cloth and wipe with the grain
of the stainless steel.
Always follow appropriate state or local health
(hygiene) regulations regarding all applicable
cleaning and sanitation requirements for equipment.
CHECK OVERALL CONDITION ONCE A MONTH
Check the case and related cabinets once a month for
physical damage and loose screws. Correct any
problems before they begin to interfere with the
operation of the unit.
DO NOT USE APPLIANCE IF CONTROLS ARE
NOT PROPERLY FUNCTIONING
Refer to the Trouble Shooting Guide located in this
manual or call an authorized service technician.
DANGER
AT NO TIME SHOULD THE INTERIOR
OR EXTERIOR BE STEAM CLEANED,
HOSED DOWN, OR FLOODED WITH
WATER OR LIQUID SOLUTION OF
ANY KIND. DO NOT USE WATER JET
TO CLEAN.
SEVERE DAMAGE OR
ELECTRICAL HAZARD
COULD RESULT.
WARRANTY BECOMES VOID IF
APPLIANCE IS FLOODED
WA R N I N G
Hood glass extended to the full,
upright portion is stabilized through
the use of gas struts designed for
the full, load-bearing weight. These
struts could weaken or fail due to
wear, environmental conditions or
aging. OPERATORS SHOULD BE
AWARE OF ANY DECREASE IN
EFFORT TO LIFT THE HOOD AND
INITIATE AN IMMEDIATE GAS STRUT
SAFETY CHECK. DO NOT LIFT THE
HOOD IN THIS CONDITION.
CAUTION
The performance of this unit has been
optimized using the factory provided
bulbs. These bulbs should be
replaced with an exact replacement or
with a factory recommended
replacement. These bulbs have been
treated to resist breakage and must be
replaced with similarly treated bulbs in
order to maintain compliance with NSF
standards. DO NOT over-tighten bulbs
in their receptacles as this can cause
damage to the bulb filament.
H N 2 & H N 2S Y S Series Operation & Care Manual • 15
SA
AN
NIITAT
T A TI IOONN
S
Food flavor and aroma are usually so closely
related that it is difficult, if not impossible, to
separate them. There is also an important,
inseparable relationship between cleanliness and
food flavor. Cleanliness, top operating efficiency,
and appearance of equipment contribute
considerably to savory, appetizing foods.
Good equipment that is kept clean, works
better and lasts longer.
The most accurate method of measuring safe
temperatures of both hot and cold foods is by
internal product temperature. A quality
thermometer is an effective tool for this purpose,
and should be routinely used on all products that
require holding at a specific temperature.
A comprehensive sanitation program should focus
on the training of staff in basic sanitation
procedures. This includes personal hygiene,
proper handling of raw foods, cooking to a safe
internal product temperature, and the routine
monitoring of internal temperatures from receiving
through service.
Most food imparts its own particular aroma and
many foods also absorb existing odors.
Unfortunately, during this absorption, there is no
distinction between GOOD and BAD odors. The
majority of objectionable flavors and odors
troubling food service operations are caused by
bacteria growth. Sourness, rancidity, mustiness,
stale or other OFF flavors are usually the result of
germ activity.
The easiest way to insure full, natural food flavor is
through comprehensive cleanliness. This means
good control of both visible soil (dirt) and invisible
soil (germs). A thorough approach to sanitation
will provide essential cleanliness. It will assure an
attractive appearance of equipment, along with
maximum efficiency and utility. More importantly,
a good sanitation program provides one of the key
elements in the prevention of food-borne illnesses.
A controlled holding environment for prepared
foods is just one of the important factors involved
in the prevention of food-borne illnesses.
Temperature monitoring and control during
receiving, storage, preparation, and the service of
foods are of equal importance.
Most food-borne illnesses can be prevented
through proper temperature control and a
comprehensive program of sanitation. Both these
factors are important to build quality service as the
foundation of customer satisfaction. Safe food
handling practices to prevent food-borne illness is
of critical importance to the health and safety of
your customers.
HACCP, an acronym for Hazard Analysis (at)
Critical Control Points, is a quality control program
of operating procedures to assure food integrity,
quality, and safety. Taking steps necessary to
augment food safety practices are both cost
effective and relatively simple. While HACCP
guidelines go far beyond the scope of this manual,
additional information is available by contacting:
CENTER FOR FOOD SAFETY AND APPLIED
NUTRITION FOOD AND DRUG ADMINISTRATION
1-888-SAFEFOOD
INTERNAL FOOD PRODUCT TEMPERATURES
HOT FOODS
DANGER ZONE
40° TO 140°F
(4° TO 60°C)
CRITICAL ZONE
70° TO 120°F
(21° TO 49°C)
SAFE ZONE
140° TO 165°F
(60° TO 74°C)
COLD FOODS
DANGER ZONE
SAFE ZONE
ABOVE 40°F
(ABOVE 4°C)
36°F TO 40°F
(2°C TO 4°C)
FROZEN FOODS
DANGER ZONE
ABOVE 32°F
(ABOVE 0°C)
CRITICAL ZONE
0° TO 32°F
(-18° TO 0°C)
SAFE ZONE
0°F or below
(-18°C or below)
H N 2 & H N 2S YS Series Operation & Care Manual • 16
SERVICE
HN2 SERIES - SERVICE VIEWS
DANGER
DISCONNECT UNIT FROM
POWER SOURCE BEFORE
CLEANING OR SERVICING.
Control Panel Access
Switch
Thermostat
SW-33896
TT-3498
Fuses
Switch
Thermostat
FU-3775
SW-33896
TT-3498
Cutting Board Bracket
BT-2342
Indicator Light
LI-3027
OR
Indicator Light
LI-3951
LI-3027
OR
LI-3951
Control panel for Model HN2-48
Cable Wrap:
ACCESS BY REMOVAL OF BOTTOM PANEL
4880 (HN2-48 SERIES )
4881 (HN2-72 SERIES )
14228 (HN2-96 SERIES )
H N 2 & H N 2S Y S S eries Operation & Care Manual • 17
SERVICE
HN2 SERIES - SERVICE VIEWS
Inside the top - lights
Bulb Receptacles
LP-33783 (230V)
LP-33592 (120/208-240V)
RP-3955 (230V)
RP-3952 (120/208-240V)
CAUTION
The performance of this unit has been
optimized using the factory provided
bulbs. These bulbs should be
replaced with an exact replacement or
with a factory recommended
replacement. These bulbs have been
treated to resist breakage and must be
replaced with similarly treated bulbs in
order to maintain compliance with NSF
standards. DO NOT over-tighten bulbs
in their receptacles as this can cause
damage to the bulb filament.
Manual Temperature Gauge ( OPTION )
Hinge Assembly Kit
GU-33384
HG-28545
Gas Ram Bolt
REMOVE TO
SERVICE GAS RAM .
Glass Clamp
CM-26919
(HN2-48 SERIES )
CM-26920
(HN2-72 SERIES )
CM-26921
(HN2-96 SERIES )
H N 2 & H N 2S YS Series Operation & Care Manual • 18
SERVICE
HN2 SERIES - SERVICE VIEWS
Upper Door Track
( NOT SHOWN )
TK-26752 (48)
TK-26754 (72)
TK-26756 (96)
Glass Clamp
Lower Door track
TK-26751 (48)
TK-26753 (72)
TK-26755 (96)
CM-26919 (48)
CM-26920 (72)
CM-26921 (96)
Door Assembly
RIGHT- HAND
MIDDLE
DR-25424
DR-25423
LEFT- HAND
DR-25422
End Glass
LEFT OR RIGHT
GL-26947
End Panel
1005367
Front Glass,
Full Service
Bumper
BM-24082
Handle
Bumper Track
11088 (48)
11089 (72)
11090 (96)
HD-27795 (48)
HD-27796 (72)
HD-27797 (96)
H N 2 & H N 2S Y S S eries Operation & Care Manual • 19
GL-26910 (48 - 1
GL-26911 (72 - 1
GL-26910 (96 - 2
REQ ’ D )
REQ ’ D )
REQ ’ D )
SERVICE
CABLE REPLACEMENT KITS
HN2-48 SERIES
C A B L E R E P L AC E M E N T K I T
CABLE HEATING SERVICE KIT NO.
4880
INCLUDES:
CB-3045
CABLE HEATING ELEMENT
CR-3226
RING CONNECTOR
. . . . . . . . . . . . . . . .134 FEET
. . . . . . . . . . . . . . . . . . . . . . . . . . .4
IN-3488
INSULATION CORNER
. . . . . . . . . . . . . . . . . . . . .1 FOOT
BU-3105
SHOULDER BUSHING
. . . . . . . . . . . . . . . . . . . . . . . . .4
BU-3106
CUP BUSHING
SL-3063
INSULATING SLEEVE
TA-3540
HIGH TEMPERATURE TAPE
ST-2439
STUD,
NU-2215
HEX NUT
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
. . . . . . . . . . . . . . . . . . . . . . . . . .4
. . . . . . . . . . . . . . . . .1 ROLL
10/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
HN2-72 SERIES
C A B L E R E P L AC E M E N T K I T
CABLE HEATING SERVICE KIT NO.
4881
INCLUDES:
CB-3045
CABLE HEATING ELEMENT
CR-3226
RING CONNECTOR
. . . . . . . . . . . . . . . .210 FEET
CAUTION
The performance of this unit has been
optimized using the factory provided
bulbs. These bulbs should be
replaced with an exact replacement or
with a factory recommended
replacement. These bulbs have been
treated to resist breakage and must be
replaced with similarly treated bulbs in
order to maintain compliance with NSF
standards. DO NOT over-tighten bulbs
in their receptacles as this can cause
damage to the bulb filament.
. . . . . . . . . . . . . . . . . . . . . . . . . .12
IN-3488
INSULATION CORNER
. . . . . . . . . . . . . . . . . . . . .1 FOOT
BU-3105
SHOULDER BUSHING
. . . . . . . . . . . . . . . . . . . . . . . .12
BU-3106
CUP BUSHING
SL-3063
INSULATING SLEEVE
TA-3540
HIGH TEMPERATURE TAPE
ST-2439
STUD,
NU-2215
HEX NUT
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . .1 ROLL
10/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
DANGER
DISCONNECT UNIT FROM
POWER SOURCE BEFORE
CLEANING OR SERVICING.
HN2-96 SERIES
C A B L E R E P L AC E M E N T K I T
CABLE HEATING SERVICE KIT NO.
14228
INCLUDES:
. . . . . . . . . . . . . . . .280 FEET
CB-3045
CABLE HEATING ELEMENT
CR-3226
RING CONNECTOR
IN-3488
INSULATION CORNER
. . . . . . . . . . . . . . . . . . . . .1 FOOT
BU-3105
SHOULDER BUSHING
. . . . . . . . . . . . . . . . . . . . . . . . .8
BU-3106
CUP BUSHING
. . . . . . . . . . . . . . . . . . . . . . . . . . .8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
. . . . . . . . . . . . . . . . . . . . . . . . . .8
SL-3063
INSULATING SLEEVE
TA-3540
HIGH TEMPERATURE TAPE
ST-2439
STUD,
NU-2215
HEX NUT
. . . . . . . . . . . . . . . . .1 ROLL
10/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
H N 2 & H N 2S YS Series Operation & Care Manual • 20
1.
BUMPER
6.
7.
8.
9.
10.
11.
12.
17.
-4
8/
P
2S
YS
LP-33783
6
6
6
6
RP-3952
6
6
6
6
RP-3955
6
6
6
6
BUMBER INSERT
BM-24082
4
4
4
4
END CAP
BM-24083
2
2
2
2
11088
1
1
1
1
CM-26919
1
1
1
1
5000243
1
1
1
1
120V/208-240V
CD-3291
1
1
1
1
230V
CD-33490
1
1
1
1
ASSEMBLY, 4ft (1219mm)
4016
1
1
1
1
CORD; 7ft (2133mm)
BRACKET
BT-2342
2
2
2
2
BRACKET BASE
11283
2
2
2
2
LEFT-HAND
DR-25422
1
1
1
1
RIGHT-HAND
DR-25423
1
1
1
1
1005367
2
2
2
2
ST-24173
1
1
1
1
FU-3772
1
1
1
1
FU-3775
2
2
2
2
GLASS, END
GL-26947
2
2
2
2
GASKET, END GLASS
GS-22547
2
2
2
2
GL-26910
1
—
1
—
DOOR, GLASS
END PANELS, BLACK
EQUIPOTENTIAL STUD
(230V ONLY)
FUSE HOLDER
FUSE, 15 AMP
GLASS, FRONT
FULL-SERVE
HANDLE, GLASS
HEATING CABLE KIT,
132ft (40234mm)
HINGE ASSEMBLY KIT
INDICATOR LIGHT, WHITE
20.
PANEL, FRONT
21.
22.
23.
PLUG
24.
THERMOSTAT
THERMOSTAT KNOB
THERMOSTAT, BEZEL
TRACK, DOOR
STRUTS, GAS
1
—
1
1
—
1
—
4880
1
1
1
1
HG-28545
1
1
1
1
2
2
2
2
1
1
1
1
IN-2003
1
1
1
1
LG-22341
4
4
—
—
UPPER
1005213
1
1
1
1
LOWER
1005342
1
1
1
1
10-12
SWITCH, TOGGLE
TERMINAL BLOCK
—
LI-3951
4" (102mm)
PAN DIVIDERS, SEE PAGES
GL-26958
HD-27795
IN-22364
INSULATION
LEGS,
26.
H
N
6
CONTROL PANEL
18.
19.
25.
S48
6
SELF-SERVE
13.
14.
15.
16.
2S
Y
6
CLAMP, GLASS
CUTTING BOARD
H
N
6
BUMBER TRACK
3.
4.
5.
248
/P
LP-33592
120V
230V
120V
230V
BULBS
RECEPTACLE, BULB
2.
H
N
PART NO.
H
N
PART DESCRIPTION
248
HN2-48 SERIES
MODULAR
PG-3337
1
1
1
1
SW-33896
2
2
2
2
BK-25432
1
1
1
1
TT-3498
2
2
2
2
KN-3473
2
2
2
2
TT-3713
2
2
2
2
BOTTOM
TK-26751
1
1
1
1
TOP
TK-26752
1
1
1
1
SU-24829
2
—
2
—
H N 2 & H N 2S Y S Series Operation & Care Manual • 21
RECEPTACLE, BULB
2.
BUMPER
BUMBER INSERT
END CAP
BUMBER TRACK
3.
4.
5.
CLAMP, GLASS
6.
CUTTING BOARD
CONTROL PANEL
CORD; 7ft (2133mm)
120V/208-240V
230V
ASSEMBLY, 6ft (1829mm)
BRACKET
BRACKET BASE
7.
DOOR, GLASS
LEFT-HAND
MIDDLE
RIGHT-HAND
8.
9.
10.
11.
END PANELS, BLACK
EQUIPOTENTIAL STUD
(230V ONLY)
FUSE HOLDER
FUSE, 15 AMP
GLASS, END
GASKET, END GLASS
12.
GLASS, FRONT
FULL-SERVE
SELF-SERVE
13.
HANDLE, GLASS
FULL-SERVE
SELF-SERVE
14.
15.
16.
HEATING CABLE KIT,
17.
INSULATION
18.
19.
20.
LEGS,
210ft (64008mm)
HINGE ASSEMBLY KIT
INDICATOR LIGHT, WHITE
120V
230V
4" (102mm)
PAN DIVIDERS, SEE PAGES
PANEL, FRONT
UPPER
PLUG
SWITCH, TOGGLE
TERMINAL BLOCK
MODULAR
POWER
24.
THERMOSTAT
THERMOSTAT KNOB
THERMOSTAT, BEZEL
25.
TRACK, DOOR
BOTTOM
TOP
26.
STRUTS, GAS
272
/P
L
H
N
272
/P
H
R
N
2S
YS
-7
H
2
N
2S
YS
-7
H
2/
N
P
2S
YS
-7
H
2/
N
2S
PL
YS
-7
2/
PR
272
/P
LP-33592
LP-33783
RP-3952
RP-3955
BM-24082
BM-24083
11089
CM-26920
5000594
CD-3557
CD-33490
4017
BT-2342
11283
DR-25422
DR-25423
DR-25424
1005367
ST-24173
FU-3772
FU-3775
GL-29947
GS-22547
GL-26911
GL-26910
GL-26959
GL-26983
HD-27796
HD-27795
4881
HG-28545
LI-3027
LI-3951
IN-22364
IN-2003
LG-22341
10
10
10
10
6
2
1
1
1
1
1
1
2
2
1
1
1
2
1
1
2
2
2
1
—
—
—
1
—
1
1
2
2
1
1
4
10
10
10
10
6
2
1
1
1
1
1
1
2
2
1
1
1
2
1
1
2
2
2
—
—
1
—
—
—
1
1
2
2
1
1
4
10
10
10
10
6
2
1
1
1
1
1
1
2
2
1
1
1
2
1
1
2
2
2
—
1
—
1
—
1
1
1
2
2
1
1
4
10
10
10
10
6
2
1
1
1
1
1
1
2
2
1
1
1
2
1
1
2
2
2
—
1
—
1
—
1
1
1
2
2
1
1
4
10
10
10
10
6
2
1
1
1
1
1
1
2
2
1
1
1
2
1
1
1
2
2
1
—
—
—
1
—
1
1
2
2
1
1
—
10
10
10
10
6
2
1
1
1
1
1
1
2
2
1
1
1
2
1
1
1
2
2
—
—
1
—
—
—
1
1
2
2
1
1
—
10
10
10
10
6
2
1
1
1
1
1
1
2
2
1
1
1
2
1
1
1
2
2
—
1
—
1
—
1
1
1
2
2
1
1
—
10
10
10
10
6
2
1
1
1
1
1
1
2
2
1
1
1
2
1
1
1
2
2
—
1
—
1
—
1
1
1
2
2
1
1
—
1005214
1005343
PG-3267
SW-33896
BK-25432
BK-3021
TT-3498
KN-3473
TT-3713
TK-26753
TK-26754
SU-24829
SU-24830
1
1
1
2
1
—
2
2
2
1
1
2
1
1
1
1
2
1
1
2
2
2
1
1
—
2
1
1
1
2
1
1
2
2
2
1
1
—
2
1
1
1
2
1
1
2
2
2
1
1
—
2
1
1
1
2
1
—
2
2
2
1
1
2
1
1
1
1
2
1
1
2
2
2
1
1
—
2
1
1
1
2
1
1
2
2
2
1
1
—
2
1
1
1
2
1
1
2
2
2
1
1
—
2
10-12
LOWER
21.
22.
23.
H
N
120V
230V
120V
230V
BULBS
H
N
1.
PART NO.
H
N
PART DESCRIPTION
272
HN2-72 SERIES
H N 2 & H N 2S YS Series Operation & Care Manual • 22
1.
BUMPER
14
14
14
14
14
14
14
14
14
14
14
14
RP-3952
RP-3955
14
14
14
14
14
14
14
14
14
14
14
14
BUMBER INSERT
BM-24082
BM-24083
11090
8
2
1
8
2
1
8
2
1
8
2
1
8
2
1
8
2
1
CM-26921
1
1
1
1
1
1
END CAP
CLAMP, GLASS
6.
CUTTING BOARD
5000868
1
1
1
1
1
1
120V/208-240V
230V
CD-3557
CD-33489
1
1
1
1
1
1
1
1
1
1
1
1
ASSEMBLY, 4ft (1219mm)
4016
BT-2342
11283
2
4
4
2
4
4
2
4
4
2
4
4
2
4
4
2
4
4
DR-25422
DR-25423
DR-25424
1
2
1
1
2
1
1
2
1
1
2
1
1
2
1
1
2
1
CONTROL PANEL
CORD; 7ft (2133mm)
BRACKET
BRACKET BASE
7.
DOOR, GLASS
LEFT-HAND
MIDDLE
RIGHT-HAND
8.
9.
10.
END PANELS, BLACK
EQUIPOTENTIAL STUD
(230V ONLY)
FUSE HOLDER
FUSE, 15 AMP
11.
GLASS, END
12.
GLASS, FRONT
GASKET, END GLASS
FULL-SERVE
SELF-SERVE
13.
N
2S
YS
-9
6
H
N
2S
YS
-9
6/
H
PL
N
2S
YS
-9
6/
PR
LP-33592
LP-33783
BUMBER TRACK
3.
4.
5.
H
120V
230V
120V
230V
BULBS
RECEPTACLE, BULB
2.
H
N
296
/P
L
H
N
296
/P
R
PART NO.
H
N
PART DESCRIPTION
296
HN2-96 SERIES
HANDLE, GLASS
FULL-SERVE
SELF-SERVE
1005367
2
2
2
2
2
2
ST-24173
1
1
1
1
1
1
FU-3772
FU-3775
1
2
1
2
1
2
1
2
1
1
1
1
GL-26947
GS-22547
2
2
2
2
2
2
2
2
2
2
2
2
GL-26910
GL-26911
GL-26983
2
—
—
—
1
1
—
1
1
2
—
—
—
1
1
—
1
1
HD-27797
HD-27796
1
—
—
1
—
1
1
—
—
1
—
1
14228
1
1
1
1
1
1
HG-28545
1
1
1
1
1
1
LI-3027
LI-3951
3
3
3
3
3
3
3
3
3
3
3
3
14.
15.
16.
HEATING CABLE KIT,
17.
INSULATION
IN-22364
IN-2003
1
1
1
1
1
1
1
1
1
1
1
1
18.
19.
20.
LEGS,
LG-2044
6
6
6
—
—
—
1005215
PE-27529
1
1
1
1
1
1
1
1
1
1
1
1
21.
22.
23.
PLUG
280ft (85344mm)
HINGE ASSEMBLY KIT
INDICATOR LIGHT, WHITE
120V
230V
4" (102mm)
PAN DIVIDERS, SEE PAGES
PANEL, FRONT
10-12
UPPER
LOWER
SWITCH, TOGGLE
TERMINAL BLOCK
MODULAR
POWER
24.
THERMOSTAT
THERMOSTAT KNOB
THERMOSTAT, BEZEL
25.
TRACK, DOOR
26.
STRUTS, GAS
BOTTOM
TOP
PG-3267
1
1
1
1
1
1
SW-33896
3
3
3
3
3
3
BK-25432
BK-3021
1
1
1
1
1
1
1
1
1
1
1
1
TT-3498
KN-3473
TT-3713
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
TK-26755
TK-26756
1
1
1
1
1
1
1
1
1
1
1
1
SU-24830
3
2
2
3
2
2
H N 2 & H N 2S Y S Series Operation & Care Manual • 23
H N 2 & H N 2S YS Series Operation & Care Manual • 24
H N 2 & H N 2S Y S Series Operation & Care Manual • 25
H N 2 & H N 2S YS Series Operation & Care Manual • 26
H N 2 & H N 2S Y S Series Operation & Care Manual • 27
H N 2 & H N 2S YS Series Operation & Care Manual • 28
H N 2 & H N 2S Y S Series Operation & Care Manual • 29
H N 2 & H N 2S YS Series Operation & Care Manual • 30
H N 2 & H N 2S Y S Series Operation & Care Manual • 31
H N 2 & H N 2S YS Series Operation & Care Manual • 32
TRANSPORTATION DAMAGE and CLAIMS
1.
2.
3.
4.
5.
6.
7.
8.
All Alto-Shaam equipment is sold F.O.B. shipping point, and when accepted by the carrier, such shipments
become the property of the consignee.
Should damage occur in shipment, it is a matter between the carrier and the consignee. In such cases,
the carrier is assumed to be responsible for the safe delivery of the merchandise, unless negligence can be
established on the part of the shipper.
Make an immediate inspection while the equipment is still in the truck or immediately after it is moved to the receiving area.
Do not wait until after the material is moved to a storage area.
Do not sign a delivery receipt or a freight bill until you have made a proper count and inspection of all merchandise received.
Note all damage to packages directly on the carrier’s delivery receipt.
Make certain the driver signs this receipt. If he refuses to sign, make a notation of this refusal on the receipt.
If the driver refuses to allow inspection, write the following on the delivery receipt:
Driver refuses to allow inspection of containers for visible damage.
Telephone the carrier’s office immediately upon finding damage, and request an inspection. Mail a written confirmation of the
time, date, and the person called.
Save any packages and packing material for further inspection by the carrier.
Promptly file a written claim with the carrier and attach copies of all supporting paperwork.
We will continue our policy of assisting our customers in collecting claims which have been properly filed and actively pursued.
We cannot, however, file any damage claims for you, assume the responsibility of any claims, or accept deductions in payment
for such claims.
LIMITED WARRANTY
Alto-Shaam, Inc. warrants to the original purchaser only that any original part that is found to be defective in material or workmanship will, at
Alto-Shaam's option, subject to provisions hereinafter stated, be replaced with a new or rebuilt part.
The parts warranty period is as follows:
For the refrigeration compressor on Alto-Shaam Quickchillers™, five (5) years from the date of installation.
For the heating element on Halo Heat® cook/hold ovens, as long as the original purchaser owns the oven.
For all other parts, one (1) year from the date of installation or fifteen (15) months from the shipping date, whichever occurs first.
The labor warranty period is one (1) year from the date of installation or fifteen (15) months from the shipping date, whichever occurs first.
Alto-Shaam will bear normal labor charges performed during standard business hours, excluding overtime, holiday rates or any
additional fees.
To be valid, a warranty claim must be asserted during the applicable warranty period. This warranty is not transferable.
THIS WARRANTY DOES NOT APPLY TO:
1. Calibration.
2. Replacement of light bulbs, door gaskets, and/or the replacement of glass due to damage of any kind.
3. Equipment damage caused by accident, shipping, improper installation or alteration.
4. Equipment used under conditions of abuse, misuse, carelessness or abnormal conditions, including but not limited to, equipment
subjected to harsh or inappropriate chemicals, including but not limited to, compounds containing chloride or quaternary salts, poor water
quality, or equipment with missing or altered serial numbers.
5. Damage incurred as a direct result of poor water quality, inadequate maintenance of steam generators and/or surfaces affected by water
quality. Water quality and required maintenance of steam generating equipment is the responsibility of the owner/operator.
6. Damage caused by use of any cleaning agent other than Alto-Shaam's Combitherm® Cleaner, including but not limited to damage due to
chlorine or other harmful chemicals. Use of Alto-Shaam's Combitherm® Cleaner on Combitherm® ovens is highly recommended.
7. Any losses or damage resulting from malfunction, including loss of product or consequential or incidental damages of any kind.
8. Equipment modified in any manner from original model, substitution of parts other than factory authorized parts, removal of any parts
including legs, or addition of any parts.
This warranty is exclusive and is in lieu of all other warranties, express or implied, including the implied warranties of merchantability and
fitness for a particular purpose. In no event shall Alto-Shaam be liable for loss of use, loss of revenue or profit, or loss of product, or for any
indirect, special, incidental, or consequential damages. No person except an officer of Alto-Shaam, Inc. is authorized to modify this warranty
or to incur on behalf of Alto-Shaam any other obligation or liability in connection with Alto-Shaam equipment.
E f fect i v e 09/10
RECORD THE MODEL AND SERIAL NUMBER OF THE APPLIANCE FOR EASY REFERENCE.
ALWAYS REFER TO BOTH MODEL AND SERIAL NUMBER IN ANY CONTACT WITH ALTO-SHAAM REGARDING THIS APPLIANCE.
Model: ______________________________________________ Date Installed: ______________________________________________________
Voltage: ______________________________________________ Purchased From: ___________________________________________
Serial Number: _____________________________________________________________________________________________________________
W164 N9221 Water Street
PHONE:
●
P.O. Box 450
●
Menomonee Falls, Wisconsin 53052-0450
●
U.S.A.
262.251.3800 • 800.558-8744 USA/CANADA
FAX: 262.251.7067 • 800.329.8744 U.S.A. ONLY
www.alto-shaam.com
PRINTED IN U.S.A.
Download PDF

advertising