Instruction manual | Bosch Appliances 86 Clothes Dryer User Manual

26”/32”/42”
A626N/A632N/A642N
INSTRUCTION MANUAL
TABLE OF CONTENT
FOR YOUR SAFETY........................................................................................... 2
PRECAUTIONS AND REMINDERS.............................................................. 3
IMPORTANT SAFETY INSTRUCTIONS...................................................... 4
PACKAGE CONTENTS.................................................................................... 5
PREPARATION.................................................................................................... 6
ATTACHING THE BASE............................................................................................................6
PREPARING YOUR LCD HDTV FOR WALL MOUNTING.............................................6
PERIPHERAL CONNECTION GUIDE......................................................... 8
OPERATING INSTRUCTIONS....................................................................... 9
TO USE THE FRONT PANEL CONTROL............................................................................9
TO USE THE REMOTE CONTROL..................................................................................... 10
VIEWING MODE ILLUSTRATIONS.................................................................................... 12
CONNECTING EQUIPMENT.............................................................................................. 13
TO USE THE MENUS............................................................................................................... 19
PICTURE MENU....................................................................................................................... 19
SOUND MENU......................................................................................................................... 20
TV MENU................................................................................................................................... 20
FEATURES MENU..................................................................................................................... 21
PARENTAL MENU.................................................................................................................... 22
COMMON INTERFACE MODULE..................................................................................... 23
OAD OPERATION.................................................................................................................. 24
TIPS.............................................................................................................................................. 25
PRODUCT SPECIFICATION......................................................................... 26
BEFORE CALLING SERVICE......................................................................... 28
GLOSSARY......................................................................................................... 29
APPENDIX......................................................................................................... 30
INFORMATION................................................................................................ 32
PRODUCT GUARANTEE.............................................................................. 33
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
1
SYMBOL
SA 1965
SA 1966
SYMBOL DEFINITION
DANGEROUS VOLTAGE: The lightning flash with arrowhead
symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of
electrical shock to persons.
INSTRUCTIONS: The exclamation point within on
equilateral triangle to alert the user to the presence of
important operating and maintenance (servicing)
instruction in the literature accompanying the appliance.
Batteries installed warning
Caution - Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like.
FOR YOUR SAFETY
Before operating the TV please read this manual thoroughly. This manual should be retained for future
reference.
NOTICE
1. The changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the
emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modification to this equipment. It is the responsibilities of the user to correct such interference.
WARNING:
To prevent fire or shock hazard, do not expose the TV to rain or moisture. Dangerously high voltages
are present inside the TV. Do not open the cabinet. Refer servicing to qualified personnel only.
2
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
PRECAUTIONS AND REMINDERS
Place unit on even surfaces.
Unplug immediately if other
foreign materials are put
inside TV box or if the TV
fell down.
Do not cover or block
any vents and openings.
Inadequate ventilation
may shorten the life of
the display unit and cause
overheating.
Unplug immediately if is
malfunction like no picture,
no video/audio, smoke and
bad odor from TV.
Prohibit/Avoid opening TV
cabinet.
Avoid direct sunlight, dusty,
high humidity and smoky
areas.
Don't throw any object
inside the TV box like
metals or other flammable
materials.
Remember to unplug the
AC cord from the AC outlet
before cleaning. Do not use
liquid cleaners or aerosol
cleaners to clean the display.
Call service personnel to
clean the internal part of
the TV once a year.
Don't place the TV in
confined spaces or in a box
when using it.
Make sure to unplug the
unit when not in use for a
long period of time (days).
Do not place the display
near water, such as bathtub,
washbasin, kitchen sink,
laundry tub, swimming pool
or in a damp basement.
Notice for Remote Controller
Avoid Dropping
7
7
0
Avoid Aerosol Cleaners
6
5
4
9
8
3
2
1
6
5
4
Avoid Liquids
3
2
1
9
8
3
2
1
6
5
4
0
7
9
8
0
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
3
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7.Do not block any of the ventilation openings. Install in accordance with the manufacturers
instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9.Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and third grounding
prong. The wide blade or third prong is provided for your safety. When the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13.The TV should be operated only from the type of power source indicated on the label. If you are not
sure of the type of power supplied to your home, consult your dealer or local power company.
14. Unplug this apparatus during lightning storms or when unused for long periods of time.
15.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
16.The Class I apparatus shall be connected to a mains socket outlet with a protective earthing
connection.
17.The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall
remain readily operable.
18.CAUTION – These servicing instructions are for use by qualified service personnel only. To reduce
the risk of electric shock, do not perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.
19.For use only with Listed Wall Mount Bracket with minimum weight/load: Please see page.26
20.Tilt/Stability – All televisions must comply with recommended international global safety standards
for tilt and stability properties of its cabinets design.
● Do not compromise these design standards by applying excessive pull force to the front, or top,
of the cabinet, which could ultimately overturn the product
● Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top
of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product
damage and/or personal injury.
4
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
21.Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as
recommended by the manufacturer.
22.Power Lines – An outdoor antenna should be located away from power lines.
23.Outdoor Antenna Grounding – If an outside antenna is connected to the receiver, be sure the
antenna system is grounded to provide some protection against voltage surges and built up static
charges. Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides information
with respect to proper grounding of the mats and supporting structure grounding of the lead-in
wire to an antenna-discharge unit, size of grounding connectors, location of antenna discharge unit,
connection to grounding electrodes and requirements for the grounding electrode. See Figure below.
ANTENNA
GROUND CLAMP
ANTENNA DISCHARGE UNIT
ELECTRIC SERVICE EQUIPMENT
GROUND CLAMPS
GROUNDING CONDUCTORS
POWER SERVICE GROUNDING ELECTRODE SYSTEM
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE Note
to the CATV system installer: This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be connected to the 6 English grounding
system of the building, as close to the point of cable entry as practical. Please, make sure to
connect the power plug to the wall outlet socket after connecting the TV to the adapter!
24.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
25.Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the
equalizer to maximum increases the earphones and headphones output voltage and therefore the
sound pressure level.
PACKAGE CONTENTS
●●
●●
●●
●●
●●
●●
TV unit
Remote Control
Two (AAA) Batteries for the Remote Control
Power Cord
User Manual
Quick Start Guide
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
5
For 42" model
PREPARATION
IMPORTANT: Do not apply pressure to the
screen display area which may compromise
the integrity of the display. The manufacturer’s
warranty does not cover user abuse or
improper installations.
PREPARING YOUR LCD HDTV FOR
WALL MOUNTING
We suggest that you keep your TV at least 2.36
inches (60 mm) from the wall to prevent cable
interference.
Before mounting your TV on the wall, you need
to remove the base.
NOTE
 Wall mount bracket & screws are not
included.
For your safety, please use listed wall mount
bracket with minimum weight of the TV
without stand. (Please see page.26.)
Please make sure to connect the power plug
to the wall outlet socket after connecting the
TV to the power cord!
To attach a wall mount bracket to your TV:
1. Install the base stand; place the TV
on a solid surface.
1 Loosen the screws holding your TV to
the stand and remove the stand base
from the TV.
2 Secure the wall mount bracket to the
back of your TV using four screws, as
indicated in the illustration.
Min
1m
For 26" model
200 mm
M4 screws
100 mm
For 32" model
Ensure that the TV is placed in a position
to allow free flow of air. Do not cover the
ventilation openings on the back cover.
To prevent any unsafe situations, no naked
flame sources, such as lighted candles,
should be placed on or in the vicinity.
Avoid heat, direct sunlight and exposure
to rain or water. The equipment shall not
be exposed to dripping or splashing.
200 mm
200 mm
6
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
2.Connect the antenna cable or CATV cable
to the aerial socket TV ANTENNA at
the back of the TV set.
3. Remote control:
emove the cover of the battery
R
compartment. Insert the 2 batteries
supplied (Type AAA 1.5V).
4. Power:
Insert the power cord in the wall socket
with AC power supply.You can see LED
states at the front panel. If the LED colour
is Blue, means the TV set is power on. If
the LED colour is Red, which means this
TV set is in standby state.
5. Turn the TV on:
ress the POWER key on the Remote
P
control or the side panel control knobs.
The TV will be turned on in a minute with
display on the screen.
Power Key
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
7
PERIPHERAL CONNECTION GUIDE
⑭
26/32
⑨
26/32
42
AC POWER
①
①
42
⑭
⑫⑨⑩ ⑪ ⑧ ⑬
⑦
②
③
④
⑤
⑥
⑫
⑩ ⑪
⑧ ⑬
②
③
④
⑤
⑥
⑮
⑦
① COMMON INTERFACE (CI) – Conditional Access Module (CAM) use only. Please
contact your service provider for details.
②、③、④ AV IN – Connect the primary source for composite video devices, such as a
VCR or video game. Use the white and red connectors to connect the external audio from
the same source.
⑤ USB – Technician service use only.
⑥ Earphone Output – Connect to the headphones. When the headphone is inserted to the
plug, all the speakers will be muted.
⑦ TV ANTENNA – Connect to an antenna or digital cable (out-of-the-wall, not from Cable
Box) for Digital TV.*
⑧、⑬ SCART – Connect the video recorder or decoder to the television. Full SCART
transmits RGB, CVBS video in/out, and audio in/ out; HALF SCART transmits S-Video, CVBS
video in/out, and audio in/ out.
Note : SCART1/2 has monitor out. (CVBS/YPbPr/ATV/DTV)
⑨ PC IN – Connect the video and audio cables from a computer here.
⑩ COMPONENT (Y/Pb/Pr with Audio L/R) – Connect the primary source for
component video devices such as a DVD Player or set top box here.
⑪ SPDIF (Digital Audio Out) – When a digital audio signal is associated with the input
selected for viewing, the digital audio will be available on this SPDIF connection to your
home theatre system.
⑫、⑭、⑮ HDMI – Connect the primary source for digital video such as a DVD multimedia
player or set top box through this all digital connector.
Once your equipment is connected, use the following procedure to view the input signal:
Press the SOURCE button on the remote controller to select the relevant source to view. (ex:
Press
YPbPr button to select “YPbPr” if you have connected a video recorder to Component socket.)
8
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
OPERATING INSTRUCTIONS
TO USE THE FRONT PANEL CONTROL
1
2
3
4
5
6
7
1
VOL +
VOL +: Press to increase the sound volume level.
2.
VOL -
VOL - : Press to decrease the sound volume level.
3.
CH ▲
CH ▲: Press to select the next higher Programme number.
4.
CH ▼
CH ▼: Press to select the next lower Programme number.
5.
MENU
Menu key: Press to open or exit the OSD (on-screen display) menu.
6.
INPUT
Input key: Press to select the input source.
7.
i
POWER
Power key: Press to turn on / off (standby) the TV set. (Press to turn on
TV after the power on status, LED had changed to the Blue colour and
stopped flashing.)
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
9
TO USE THE REMOTE CONTROL
POWER
Press to turn ON/OFF
(standby) the TV.
ZOOM
Select the display aspect from
Auto, Normal (4:3), Wide
(16:9), subtitle, full screen, or
14:9 mode.
SOURCE
Press repeatedly to choose the
various input sources.
Number buttons
Press to enter TV channel
number to select channel.
DUAL
Press to select from mono,
stereo, Dual I, or Dual II.
PRE CH
Press to display the previous
channel.
AUDIO ADJ
Press to choose from Personal,
Speech, Music.
EPG
EPG
Press to display the Electronic
Programme Guide.
YPbPr
VIDEO ADJ
Press to choose the Smart
Picture mode from Personal,
Standard, Movie, Vivid, Eco.
Vol
DUAL
HDMI
Press to choose HDMI source
mode.
YPbPr
Press to choose YPbPr source
mode.
SLEEP
Press to set the preset time to
switch the TV to standby mode
automatically.
MENU
/EXIT
INFO
VIDEO
Press to choose AV source
mode.
PC
Press to choose PC source
mode.
VOL+ / VOLPress + or - to adjust the
volume.
CH / CH
Press or to browse
through the TV channels.
MUTE
Switch the sound ON/OFF.
10
MENU/EXIT
Press to open or close menu.
, OK
Press to adjust or confirm the
various function items on the
menu.
▲, ▼, ◄, ►
FAV
CH-LIST
AD
FREEZE
INFO
Press to display or close the
information screen.
Colour buttons
• In TV mode: Follow the
directions in the OSD
screen.
• In Text mode: Text control
buttons.
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
EPG
YPbPr
TELETEXT
Press to display or close the Teletext.
MIX
Display the Teletext with TV.
Vol
DUAL
SIZE
Press to change the font size: Full screen,
Top half and Bottom half.
SUBPAGE
Display the sub page (when available).
MENU
/EXIT
INFO
INDEX
Press to return to page 100 or the index
page.
SUBTITLE
• In TV mode: It works only for turning
on the subtitle and change to the next
page marked as subtitle.
• In Text mode: Select the next page
marked as a subtitle page and request
it as the display page.
FAV
CH-LIST
AD
FREEZE
HOLD
Press to stop the scrolling of pages. The
text decoder stops receiving data.
REVEAL
Reveal hidden information such as answers
to a quiz.
FAV
Display the Favourite Channel List.
CH-LIST
Display the Channel List.
AD (Audio Description)
Select the audio description track.
FREEZE
Press to freeze the TV picture.
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
11
VIEWING MODE ILLUSTRATIONS
Normal Mode
The original content would be at the centre of the screen.
16:9 Content
4:3 Content
Wide Mode
The original content in this mode has to fill the entire screen of the display.
16:9 Content
4:3 Content
Zoom Mode
For those wide format images which are originally programmed into 4:3 frames with black
bars around, this mode would stretch the image in both width and height for full display with
active data.
Same image in ZOOM mode
12
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
CONNECTING EQUIPMENT
42"
Coaxial (RF)
Using Your Antenna or Digital Cable for
DTV.
26"/32"
1. Turn off the HDTV.
2. Connect the coaxial (RF) connector from
your antenna or cable (out-of-the-wall, not
from the Cable Box) to the TV ANTENNA
connector at the rear of the HDTV
3. Turn on the HDTV.
42"
4. Select ATV/DTV using the SOURCE button
on the remote control or the control key
on the side of the TV.
Using the Antenna or Cable for your
VCR
26"/32"
1. Turn off the HDTV.
2. Connect the coaxial (RF) connector from
your antenna or digital cable (out-of-thewall, not from the Cable Box) to the TV
ANTENNA connector.
3. Turn on the HDTV.
4. Select ATV/DTV using the SOURCE button
on the remote control or the control key
on the side of the TV.
42"
Using Your Antenna or Cable for DTV.
26"/32"
1. Turn off the HDTV and VCR.
2. Connect the “Output to TV”, “RF Out” or
“Antenna Out” connector on the rear of
your VCR to the TV ANTENNA connector
at the rear of the HDTV.
3. Turn on the HDTV and VCR.
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
13
4. Select ATV/DTV using the SOURCE button
on the remote control or the control key
on the side of the TV.
NOTE
 If you have an off-air antenna or cable TV,
connect it to the “Antenna In” connector
on the rear of your VCR.
Connecting Your HDTV Set-Top Box
Using HDMI
4. Select HDMI using the SOURCE button on
the remote, side of the HDTV, or directly
by pressing the HDMI button on the
Remote Control.
NOTE
 The HDMI input on the HDTV supports
High-bandwidth Digital Content Protection
(HDCP). HDCP encrypts the transmission
between the video source and the digital
display for added security and protection.
 Refer to your HDTV Set-Top Box user
manual for more information about the
video output requirements of the product
or consult your cable or satellite operator.
HDTV Set-Top Boxes that have a HDMI digital
interface should be connected to the HDMI
input of the LCD HDTV for optimal results.
For HDTV Set-Top Boxes with DVI
Connecting your HDTV Set-Top Box
(Best)
1. Turn off the HDTV and HDTV Set-Top
Box.
26"/32"
2. Using a HDMI-DVI cable, connect the DVI
end to your HDTV Set-Top Box and the
HDMI end to the HDMI Input at the rear
of the HDTV.
3. Turn on the HDTV and HDTV Set-Top
Box.
4. Select HDMI using the SOURCE button on
the remote, side of the HDTV, or directly
by pressing the HDMI button on the
Remote Control.
42"
NOTE
 The HDMI input on the HDTV supports
High-bandwidth Digital Content Protection
(HDCP). HDCP encrypts the transmission
between the video source and the digital
display for added security and protection.
1. Turn off the HDTV and HDTV Set-Top
Box.
2. Connect a HDMI cable to the HDMI
output of your HDTV Set-Top Box and the
other end to the HDMI Input at the rear
of the HDTV.
3. Turn on the HDTV and HDTV Set-Top
Box.
14
 Refer to your HDTV Set-Top Box user
manual for more information about the
video output requirements of the product
or consult your cable or satellite operator.
 The DVI to HDMI connection provides
video only. Connection to an alternate
audio player is required for audio.
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
Using Component Video
Connecting your HDTV Set-Top Box
(Better):
7. Select YPbPr using the SOURCE button on
the remote, side of the HDTV or directly
by pressing the YPbPr button on the
Remote Control.
26"/32"
NOTE
 Refer to your HDTV Set-Top Box user
manual for more information about the
video output requirements of the product
or consult your cable or satellite operator.
Connecting Your Basic Set-Top Box
42"
Using Composite Video
1. Turn off the HDTV and HDTV Set-Top
Box.
2. Connect the Pr (red colour) connector
on your HDTV Set-Top Box to the
corresponding Pr (red colour) connector
in the Component group.
3. Connect the Pb (blue colour) connector
on your HDTV Set-Top Box to the
corresponding Pb (blue colour) connector
in the Component group.
4. Connect the Y (green colour) connector
on your HDTV Set-Top Box to the
corresponding Y (green colour) connector
in the Component group.
5. Using an audio cable (red and white
connectors), connect the cable to the
audio output connectors associated with
the Component output on your HDTV
Set-Top Box and connect the other end to
the audio connectors associated with the
Component.
1. Turn off the HDTV and Set-Top Box.
2. Using an AV Cable, connect the Video
(yellow colour) connector on your Set-Top
Box to the corresponding Video (yellow
colour) connector in the AV group at the
side of the HDTV.
3. Using the red and white connectors,
connect the cable to the audio output
connectors associated with the Video
output on your Set-Top Box and connect
the other end to the audio connectors
associated with the AV input at the side of
the HDTV.
4. Turn on the HDTV and Set-Top Box.
5. Select AV using the SOURCE button on
the remote, side of the HDTV or directly
by pressing the VIDEO button on the
Remote Control.
6. Turn on the HDTV and HDTV Set-Top
Box.
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
15
26"/32"
Connecting your DVD Player (Best)
26"/32"
42"
42"
1. Turn off the HDTV and Set-Top Box.
1. Turn off the HDTV and DVD player.
2. Using a Coax (RF) cable, connect one end
to the TV OUT (RF) on your Set Top Box
and the other end to the TV input at the
rear of the HDTV.
2. Connect a HDMI cable to the HDMI output
of your DVD player and the other end to
the HDMI Input at the rear of the HDTV.
3. Turn on the HDTV and Set-Top Box.
4. Select HDMI using the SOURCE button on
the remote, side of the HDTV or directly
by pressing the HDMI button on the
Remote Control.
Using Coax (RF)
4. Select ATV/DTV using the SOURCE button
on the remote control or the control key
on the side of the TV.
NOTE
 Refer to your Set Top Box user manual
for more information about selecting the
video or RF output of the product.
Connecting Your DVD Player
Using HDMI
DVD players that have a digital interface
such as HDMI (High Definition Multimedia
Interface) should be connected to the HDMI
input of the LCD HDTV for optimal results.
16
3. Turn on the HDTV and DVD player.
For DVD Players with DVI:
1. Turn off the HDTV and DVD player.
2. Using a HDMI-DVI cable, connect the DVI
end to your DVD player and the HDMI end
to the HDMI Input at the rear of the HDTV.
3. Turn on the HDTV and your DVD player.
4. Select HDMI using the SOURCE button on
the remote, side of the HDTV, or directly by
pressing the HDMI button on the Remote
Control.
NOTE
 Refer to your DVD player user manual for
more information about the video output
requirements of the product.
 The DVI to HDMI connection provides
video only. Connection to an alternate
audio player is required for audio output.
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
Using Component Video
Connecting your DVD Player (Better)
26"/32"
7. Select YPbPr using the SOURCE button on
the remote, side of the HDTV or directly
by pressing the YPbPr button on the
Remote Control.
NOTE
 Refer to your DVD player user manual for
more information about the video output
requirements of the product.
Using SCART
Connecting your DVD Player (Good):
42"
26"/32"
1. Turn off the HDTV and DVD player.
2. Connect the Pr (red colour) connector on
your DVD player to the corresponding Pr
(red colour) connector in the Component
at the rear of the HDTV.
3. Connect the Pb (blue colour) connector
on your DVD player to the corresponding
Pb (blue colour) connector in the
Component group at the rear of the
HDTV.
4. Connect the Y (green colour) connector
on your DVD player to the corresponding
Y (green colour) connector in the
Component group at the rear of the
HDTV.
5. Using an audio cable (red and white
connectors), connect the cable to the
audio output connectors associated with
the Component output on your DVD
player and connect the other end to the
audio connectors associated with the
Component input at the rear of the HDTV.
42"
1. Turn off the HDTV and DVD player.
2. Connect the SCART socket of your DVD
player to the SCART socket of the HDTV.
3. Turn on the HDTV and DVD player.
4. Select AV using the SOURCE button on
the remote, side of the HDTV, or directly
by pressing the VIDEO button on the
Remote Control.
6. Turn on the HDTV and DVD player.
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
17
Using Composite (AV) Video
1. Turn off the HDTV and VCR or Video Camera.
Connecting your DVD Player (Good)
2. Connect the SCART socket of your VCR
or Video Camera to the SCART socket of
the HDTV.
3. Turn on the HDTV and VCR or Video Camera.
4. Select AV using the SOURCE button on
the remote, side of the HDTV or directly
by pressing the VIDEO button on the
Remote Control.
1. Turn off the HDTV and DVD player.
2. Connect the Video (yellow colour)
connector on your DVD player to the Video
(yellow colour) connector in the AV group.
3. Connect the R (red colour) and L (white
colour) audio connectors on your DVD
player to the corresponding R (red
colour) and L (white colour) audio input
connectors in the AV group.
4. Turn on the HDTV and DVD Player.
5. Select AV using the SOURCE button on
the remote, side of the HDTV or directly
by pressing the VIDEO button on the
Remote Control.
Using SCART
Connecting Your VCR or Video Camera
NOTE
 Refer to your VCR or Video Camera user
manual for more information about the
video output requirements of the product.
Connecting to a PC
26"/32"
42"
26"/32"
42"
18
1. Turn off the HDTV and PC.
2. Connect a 15-pin D-Sub RGB (VGA) cable to
the RGB output of your PC and the other end
to the VGA input at the rear of the HDTV.
3. Connect the Audio Out on your computer
to the AUDIO input at the rear of the
HDTV.
4. Turn on the HDTV and PC.
5. Select VGA using the SOURCE button on
the remote, side of the HDTV or directly by
pressing the PC button on the Remote.
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
NOTE
 For the best picture quality when
connecting a computer through VGA, set
your computer timing mode to native
resolution of panel. Please refer to the PC
or graphic card’s user guide for additional
information on how to set the timing
mode and the video output requirements
of the product.
1. Press the MENU/EXIT button to display
or close the main menu
2. Use the Navigation Ring to move around
to select, adjust or confirm an item in the
OSD (On Screen Display) menu.
Press the MENU/EXIT button to enter the
main OSD. Adjust the items including Picture,
Sound, TV, Features, and Parental.
However, some function items in the menus may
only be enabled in the particular source modes.
PICTURE MENU
The Picture menu in most source modes shows
as below. It provides several video adjustment
items for user fine tuning the video display.
Picture
Smart Picture
Standard
Sound
Brightness
45
TV
Contrast
50
Colour
60
Features
Tint
0
Parental
Sharpness
5
Colour Temperature
electE
Cool
EXIT
xit
The picture menu in PC source mode shows as
below.
Picture
Brightness
100
Sound
Contrast
50
Features
Colour Temperature
Cool
Advanced Video
Enter
Select
4. Colour: To add or reduce colour.
5. Tint: To adjust the picture tint.
EXIT
7. Colour Temperature: To choose between
Normal (neutral), Warm (redder), and Cool
(bluer).
8. Advanced Control:
[Noise Reduction] - To filter out and
reduces the image noise and improve picture
quality. Select the effect degrees from Off,
Low, Medium, High, or Auto.
[Flash Tone] - To adjust the skin colour to
be more natural.
[Back Light] - To make the background
colour brighter or darker.
[DCR] - Dynamic Contrast Ratio (DCR)
auto adjusts the brightness of the screen to
show more depths in the darker areas.
[HDMI Mode] - (HDMI only) User can
select Auto/graphic/Video mode.
Description as following:
• Graphic: Force video timing shows
as graphic timing, for example: 720p
shows 1280x720@60Hz; 1080i shows
1920x1080@60Hz. This mode optimises
for PC input.
• Video: Force graphic timing shows as
video timing, for example:
1280x720@60Hz shows 720p;
1920x1080@60Hz shows 1080i.
This mode optimises for DVD player,
camcorder, and other video appliances
inputs.
Parental
OK
3. Contrast: To sharpen the picture quality.
• Auto: Automatic to get device information,
device will indicate sending timing is video
timing or graphic timing (PC timing).
Advanced Control
EnterS
2. Brightness: To brighten the dark parts of
the picture.
6. Sharpness: To improve detail.
TO USE THE MENUS
OK
1. Smart Picture: To set the best picture
appearance to a predefined picturesetting
from Standard,Vivid, Movie, Eco, or Personal.
Exit
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
19
SOUND MENU
The Sound menu provides audio adjustment
for user to modify the audio setting.
Picture
Sound
TV
Features
Parental
OK
Enter
Picture
Sound Mode
Equalizer 120Hz
Equalizer 500Hz
Equalizer 1.5KHz
Equalizer 5KHz
Equalizer 10KHz
Balance
Virtual Surround
Digital Audio Out
Select
SPDIF Delay
AVL
Type
Sound
TV
Personal
0
0
0
0
0
0
On
PCM
EXIT
Exit
0
Off
Normal
6. AVL: Choose On or Off to adjust volume
to be consistent across programmes and
channels automatically.
The following functions are only available
for digital channels with audio signals.
7. Type: This function enables you to choose
the type of the additional narration during
the TV watching from Normal, Hard of
Hearing, or Audio Description.
Hard of Hearing: This function provides
narration to deaf and hard of hearing
viewers.
8. Audio description: When the Type is set
to “Audio Description”, you can adjust the
volume of the audio description.
TV MENU
Audio Description
Features
Parental
Picture
Sound
OK
Adjust
Select
EXIT
Back
1. Sound Mode: To set the TV to a fig. 38-1
predefined sound setting from Personal,
Music, or Speech.
2. Balance: To adjust the balance between
left and right channels.
3. Virtual Surround: To add greater depth
and dimension to the TV sound.
4. Digital Audio Out: To select the Digital
Audio Out from Off or PCM.
5. SPDIF Delay: SPDIF Delay function will
affect SCART/Line out audio also delay
at that time. The NorDig HD IRD shall
support the possibility to adjust the audiodelay on the SPDIF output (if available) up
to 250 ms and it should be adjustable in
10ms steps, as the IRD may have several
different user set-ups, resulting in different
a/v delays; e.g. the IRD may be connected
to several types of external audioamplifiers and the STB may be connected
to several types of external screens.
20
TV
Country
1st Audio
2nd Audio
Channels
Austria
English
English
Features
Parental
OK
Enter
Picture
Sound
TV
Features
Parental
OK
Scan
Select
EXIT
Exit
EXIT
Back
Channel Scan
Update Scan
Single RF Scan
Analog Manual Scan
Channel Skip
Channel Sort
Channel Edit
Decoder
Analog Ch Fine Tune
Select
fig. 43
1. Country: To select the relevant country.
This is the country you are in, or the
country whose channels you want to
receive if you live near its borders.
2. Audio Carrier (ATV only): Select
Stereo, Dual 1, Dual 2, or Mono for ATV
channel.
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
3. 1st and 2nd Audio: Use this function
when two or more audio languages are
broadcast. This is the language to be used
for digital channels if it is available.
[Channel skip] - To prevent certain
programs from being viewed by pressing
CH + / - buttons on the remote control,
the program position can be skipped.
4. Channels: Enter the channels submenu,
and choose from Channel Scan, Update
Scan, Single RF Scan, Analog Manual Scan,
Channel Skip, Channel Sort, Channel Edit,
Decoder, and Analog CH Fine Tune.
Tip: The skipped program may not be found
by pressing CH + / - buttons but can be
access by pressing number buttons directly.
[Channel scan] - Channel Scan will retune the television automatically. It is
recommended to run the Channel Scan
periodically to ensure that all new services
are added.
[Update scan] - Search the new channels
automatically that are not in the channel list.
[Single RF Scan (Digital Only)] Enter the Single RF Scan in the Channels
submenu to scan digital channels.
Tip: The skipped program may not be found
by pressing CH Λ / V but can be accessed by
pressing number buttons directly.
[Channel sort] - Change the order of
the Channel List.
[Channel Edit] - Enter the Channel
Edit in the channels submenu to edit the
channel number and channel name by using
the number buttons 0~9.
Note: The following RC number-mapping
table will not be shown on the TV screen.
RC
Picture
Scan single RF channel.(Digital Only)
Sound
TV
0%
Features
RF Channel
Signal Strength
Signal Quality
Parental
OK
Scan
EXIT
7
60
Good
Back
fig. 45
[Analog Manual Scan] - The television
can be tuned-in manually using Analog
Manual Scan. Use the number keys to enter
the Start Frequency to scan up or scan
down.
Picture
.
@
_
A B
D E
G H
J K
M N
P Q
T U
W X
0
C
F
I
L
O
R
V
Y
1
a
d
g
j
m
S
t
Z
b
e
H
k
n
p
u
w
c
f
i
l
o
q
v
x
2
3
4
5
6
r
8
y
s
7
z
9
[Decoder (Analog only)] - Channel
Decode support the Canal+ (paid television
channel); however, the channel also
broadcast some un-encrypted programs.
These programs without encryption can be
viewed free of charge.
[Analog CH Fine Tune] - Select Analog
CH Fine Tune in the Channels submenu to
adjust the frequency.
Search for analog channels.
Sound
FEATURES MENU
TV
Features
Parental
Exit
Available characters
0
1
2
3
4
5
6
7
8
9
Start Frequency (MHz)
Scan Up
Scan Down
45.00
Back
fig. 46
The Features menu in TV mode shows
as below. This menu gives users the most
flexibilities to satisfy their generally demands.
According to the various requirements in
different source modes, certain features should
be hidden (disable) on the menu. The details
footnotes will be described clearly below.
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
21
teletext language to the regional location.
Picture
Menu Language
English
Sound
Picture Format
Wide
TV
Subtitle
Time
Features
Teletext Language
Parental
Reset Default
OK
Enter
7. HDMI Scan Info (HDMI only):
[Automatic] - Set to underscan or
overscan automatically when the video
signal is detected.
Common Interface
Select
6. Common Interface: This menu appears
with your CI supplier information.
EXIT
Exit
1. Menu Language: To select the on-screen
display menu language.
2. Picture Format: To select the available
display format from Auto, Normal, Native
(HDMI only), Zoom 1, Zoom2, or Wide.
3. Time:
[Underscan] - When the video signal
is detected, all active pixels and lines are
displayed with or without border.
[Overscan] - When the video signal is
detected, some active pixels and lines at
the edges are not displayed.
8. Reset Default: To reset all TV settings to
the original factory values.
[Time Zone] - To select the time zone
you are in.
PARENTAL MENU
[Time] - To set the time and date or
select auto synchronization.
Enable you to control special functions for the
TV channels.
Tip: Before you want to set the time and
date by your own, please make sure Auto
synchronization is Off.
[Sleep Timer] - To set the TV to turn
itself off within a certain time.
4. Subtitle:
Picture
Sound
TV
Features
Channel Block
Parental Guidance
Input Block
Set Password
Clear All
Parental
[Analog Subtitle] - To display the
OK Enter
EXIT Back
transmitted subtitle on the screen. Either
Select
this text can be permanently displayed
1. Channel Block: To block certain TV
(assuming that the service is available in
channels.
the broadcast) or only when mute is active.
2. Parental Guidance: To control access
[Digital Subtitle] - Use the Digital
programs based on their age ratings. All
Subtitle function when two or more
settings apply to digital channels.
subtitle languages are broadcasted. If
subtitle data in a selected language is not
Note: This function operates according to
broadcasted, the default language subtitle
information from the broadcasting station.
will be displayed.
Therefore if the signal has no information,
this function does not operate.
[Subtitle Type] - To choose the subtitle
type from normal or hearing impaired.
3. Input Block: To disable the specific
external input signals.
5. Teletext Language:
4.
Set Password: To set or change your
[Digital Teletext Language] - To select
password. Please follow the instructions to
the teletext language.
set it. All number combinations from 0000
[Decode Page Language] - To set the
to 9999 are valid.
22
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
Tip: Remember that 5351 is the default
Change Password code. If your access code
has been changed or you have forgotten
the code, you can always get in by inputting
the default code.
5. Clear All: To clear all the settings in the
parental submenu.
COMMON INTERFACE MODULE
-
The Common Interface CI Slot, is designed
to accept the Conditional Access CA
Module coupled with a Smart card,
in order to view pay TV programmes
and additional services. Contact your
Common Interface service provider for
further information about modules and
subscription options. Please note that CA
modules and smart cards are not included,
or supplied as optional extras by us.
Smart Card
Picture
Menu Language
English
Sound
Picture Format
Wide
TV
Subtitle
Features
Teletext Language
Parental
Reset Default
OK
WARNING: Switch off your TV before
any module is inserted into the Common
Interface slot.
1. Correctly insert the CA Module and then
the Smart Card into the CI slot located at
the side of the TV.
2. Turn on the TV and press MENU and
select the TV submenu.
“Common interface” will be displayed if
the CA module is detected. Wait for few
moments until the card is activated.
Common Interface
Enter
Select
EXIT
fig. 63
Exit
3. Select Common Interface to view the
menu options and information on the
inserted CI card.
Picture
Menu Language
English
Sound
Picture Format
Wide
TV
Subtitle
Time
Features
Teletext Language
Parental
Reset Default
OK
CA Module
Time
Common Interface
Enter
Select
EXIT
Exit
4. Press OK to access the card menu, fig. 64
for more details refer to the module’s
instruction manual.
Picture
Menu Language
English
Sound
Picture Format
Wide
TV
Subtitle
Time
Features
Teletext Language
Parental
Reset Default
OK
Enter
Common Interface
Select
EXIT
Exit
fig. 64
Picture
CryptoWorks
Sound
TV
Features
Parental
OK
Enter
EXIT
Back
fig. 66
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
23
Over Air Download
Picture
Software ID : XXXXXXXX
No CI card presented.
A New Version of software is detected.Do you want to upgrade
it?
Sound
TV
Features
Accept
Remind me Later
Parental
Select
EXIT
Back
fig. 67
5. When module is removed, the “Common
Interface” menu will disappear from the
screen.
Next
2. Press ▲ ▼ to confirm if you would like
to “Accept” this new software or “Reject
“ and use ► button to action update new
software.
Over Air Download
Software ID : XXXXXXXX
Picture
Searching
No CI card presented.
Sound
0%
TV
Features
Parental
Back
EXIT
Over Air Download
Back
fig. 67
Software ID : XXXXXXXX
Searching... This process may take up to 25 minutes
OAD OPERATION
OAD for Software Update function:
1. When you get the updating news from
the TV shop’s web, you can update the
operation software using the Download
menu. The data for various units are
transferred consecutively on a special
receiving channel.
2. you need to search the channel with
updating code stream. (Note: you can get
information from the TV shop or internet.)
Operation
1. When you search the channel.You will get
a information.
12%
Back
Over Air Download
Software ID : XXXXXXXX
Seraching.
Accept
Reject
Select
Next
Over Air Download
Software ID : XXXXXXXX
Programming...
69%
Warring : During the process. Please do not unplug the TV Set
power code as this lead to defective TV Set.
24
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
3. After the programming , please use ▲ ▼ to
confirm if you would like to restart the TV.
The software will be updated completely
after restart the TV.
Over Air Download
Software ID : XXXXXXXX
Software upgrades successfully! Restart the TV now?
Accept
Reject
Select
Next
OK
Exit
NOTE:You must not switch off the unit during
this process!
TIPS
Care of the screen
Do not rub or strike the screen with anything
hard as this may scratch, mar, or damage the
screen permanently.
Unplug the power cord before cleaning the
screen. Dust the TV by wiping the screen
and the cabinet with a soft, clean cloth. If the
screen requires additional cleaning, use a
clean, damp cloth. Do not use liquid cleaners
or aerosol cleaners.
Mobile telephone warning
To avoid disturbances in picture and sound,
malfunctioning of your TV or even damage
to the TV, keep away your mobile telephone
from the TV.
End of life directives
We are paying a lot of attention to produce
environmental friendly in green focal areas.
Your new receiver contains materials, which
can be recycled and reused.
At the end of its life, specialized companies
can dismantle the discarded receiver to
concentrate the reusable materials and to
minimize the amount of materials to be
disposed of.
Please ensure you dispose of your old
receiver according to local regulations.
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
25
PRODUCT SPECIFICATION
NOTE
* This model complies with the specifications listed below.
* Designs and specifications are subject to change without notice.
* These models may not be compatible with features and/or specifications that may be added
in the future.
Model No.
A626N
A632N
A642N
32”
42”
DISPLAY
Viewable
26”
Television System
PAL, SECAM standard, DVB-T standard
CONNECTIONS
Tuner input (75Ω)
PC IN: D-SUB and PC Audio (Headphone mini-jack)
Recommended:1360x768/60Hz
Component Video and L/R Audio input
Supported resolution: 480i, 576i/p, 720p, 1080i , 1080p(42" only)
HDMI input
Supported scan rates: 480p, 480i, 576p, 576i, 720p, 1080i, 1080p(42" only)
Rear Connectors
SCART 1
SCART 2
SPDIF
HDMI 1
HDMI 2
SCART 1
SCART 2
SPDIF
HDMI 1
HDMI 2
SCART 1
SCART 2
SPDIF
HDMI 1
HDMI 2
HDMI 3
SCART 1: RGB + CVBS in/out + audio in/out
SCART 2: S-Video + CVBS in/out + audio in/out
Side Connectors
COMMON INTERFACE
AV In (Composite Audio/ Video)
Earphone Output
WEIGHT & DIMENSIOIN
Dimensions
with Stand
(W x H x D)
Weight with Stand
Weight without Stand
and Base
26
657.16x489.28x218.92
mm
789X238X565
mm
1009x262x687
mm
8kg
11.11kg
20.5kg
6.84kg
9.23kg
17.6kg
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
WALL MOUNTING
VESA-compatible
wall bracket
(W x H)
Screw type
200x100 mm
200x200 mm
400x200 mm
Metric 4x10 mm
Metric 6x10 mm
Metric 6x10 mm
POWER
Power Consumption
120
130
200
Mains Power
AC220-240V~,
50/60Hz
AC220-240V~,
50/60Hz
AC220-240V~,
50/60Hz
Audio Power
5W + 5W
5W + 5W
10W + 10W
Standby
< 1W
Ambient Temperature 5°C - 35°C
PACKAGE CONTENTS
Supplied Accessories TV unit x1
Power cord x 1
Remote control x1 (with two size AAA alkaline batteries)
User manual x1
Quick Start Guide x1
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
27
BEFORE CALLING SERVICE
Please make these simple checks before calling service. These tips may save you time and money
since charges for receiver installation and adjustments of customer controls are not covered
under your warranty.
Symptoms
Items to Check and Actions to follow
“Ghost ” or double image
*This may be caused by obstruction to the antenna
due to high rise buildings or hills. Using a highly
directional antenna may improve the picture.
No power
*Check if the TV’s AC power cord is plugged into
the mains socket.
*Unplug the TV, wait for 60 seconds. Then reinsert
plug into the mains socket and turn on the TV
again.
No picture
*Check antenna connections at the rear of the TV
to see if it is properly connected to the TV.
*Possible broadcast station trouble.
Try another channel.
*Adjust the contrast and brightness settings.
*Check the Closed Captions control. Some TEXT
modes could block the screen,
Good picture but no sound
*Increase the VOLUME.
*Check if the TV is muted; press the MUTE button
on the remote control.
Good sound but poor colour
*Adjust the contrast, colour and brightness
settings.
Poor picture
*Poor picture quality may occur when an activated
S-VHS camera or camcorder is connected to
your TV and the other peripheral at the same
time. Switch off one of the peripherals.
Snowy picture and noise
*Check the antenna connection
Horizontal dotted line
*This may be caused by electrical interference (e.g.
hairdryer, nearby neon lights, etc.)
*Turn off the equipment.
Television not responding to remote control
*Check whether the batteries are working.
Replace if necessary
*Clean the remote control sensor lens on the TV.
*You can still use the buttons at the front of your
TV.
*Select the TV mode to ensure your remote
control is set in the TV mode.
28
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
GLOSSARY
HDTV
HDTV displays are technically defined as being capable of displaying a minimum of 720p
or 1080i active scan lines.
HDMI Inputs
High-Definition Multimedia Interface
Audio / Video Inputs
Located on the rear of the receiver, these connectors (RCA phono type plug) are
used for the input of audio and video signals. Designed for use with VCRs (or other
accessories) in order to receive higher picture resolution and offer sound connection
options.
Menu
An on-screen listing of features shown on the TV screen is made available for user
adjustments.
RF
Radio Frequency or modulated signal design used as the carrier for television broadcasts.
Sleep Timer
You can set a time period for which the TV will be turn off automatically.
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
29
APPENDIX
Appendix 1
VGA Timing table
Item
Mode
Resolution
V.Freq.(KHz)
1
31.469
IBM VGA
640x350
70.086
2
31.469
IBM VGA
720x400
70.087
26"/32"
42"

3
31.469
IBM VGA
640x480
59.94

4
35
MACINTOSH
640x480
67

5
37.861
VESA
640x480
72.809

6
37.5
VESA
640x480
75

7
35.156
VESA
800x600
56.25



8
37.879
VESA
800x600
60.317

9
48.077
VESA
800x600
72.188

10
46.875
VESA
800x600
75

11
49.7
MACINTOSH
832x624
75

12
48.363
VESA
1024x768
60.004

13
56.476
VESA
1024x768
70.069

14
60.023
VESA
1024x768
75.029

15
61.08
IBM XGA-2
1024x768
75.781
16
44.772
VESA CVT
1280x720
59.855
17
47.776
VESA
1280x768
59.87
18
60.289
VESA
1280x768
75
49.702
VESA
1280x800
59.81
19
47.72
VESA CVT
1360x768
59.799
20
63.981
VESA
1280x1024
60.02
21
30
H.Freq.(KHz)
79.976
VESA
1280x1024
75.025
55.935
VESA
1440x900
59.887
70.635
VESA
1440x900
74.984
22
65.29
CVT1.76MW
1680x1050
59.954
23
64.674
CVT1.76MW-R
1680x1050
59.883
24
66.587
CVT2.3MA-R
1920x1080
60





BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105




Appendix 2
HDMI (High Definition Multimedia Interface) support format
1. Support 480i/480p, 576i/576p, 720p, 1080i, 1080p (42" only) format with HDCP.
2. Digital interface with 4 channels TMDS signal.
Scart input/output description
TV Source
ATV
DTV
Screen Display Source
SCART1 Out
SCART2 Out
ATV
ATV
ATV
CVBS
CVBS
CVBS
HDMI / VGA / Component
-- / -- / Component
-- / -- / Component
DTV
DTV
TV
CVBS
CVBS
CVBS
HDMI / VGA / Component
-- / -- / Component
-- / -- / Component
Note: SCART have no output in HDMI and VGA source.
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
31
INFORMATION
Connecting to Power
Check that the voltage marked on the product corresponds with your supply voltage.
This product is fitted with a 10A plug complying with BS1363. If this plug is unsuitable
or needs to be replaced, please note the following :
Plug Replacement
If you need to replace the fitted plug.
WARNING :
Never connect live or neutral wires to the earth terminal of the plug.
Only fit an approved 13 Amp BS1363/A plug and the correct rated fuse.
If in doubt, consult a qualified electrician.
IMPORTANT
This unit is a Class 1 Appliance and must be fitted
with an Earthed Plug fitted with a 13A fuse.
The wires in this mains lead are coloured as follows:
Yellow & Green-Earth
Blue-Neutral
Brown-Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
YELLOW & GREEN
(EARTH)
BLUE
(NEUTRAL)
CABLE
GRIP
BROWN
(LIVE)
The wire which is Coloured Yellow & Green must be connected to the terminal
which is marked E or the earth symbol ( ). The wire which is coloured blue must
be connected to the terminal which is marked with N or coloured blue. The wire
which is coloured brown must be connected to the terminal which is marked L
or coloured brown. Always ensure that the plug cord grip is fastened correctly.
If a 13A (BS1363) fused plug is used it must be fitted with a 3A fuse conforming
to BS1362 and be ASTA approved. If in doubt contact a qualified electrician.
CE marking
The shipped version of this device complies with the requirements
of EEC directives 2004/108/EC "Electromagnetic compatibility" and
2006/95/EC "Low voltage directive"
WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED
OF WITH HOUSEHOLD WASTE. PLEASE RECYCLE WHERE
FACILITIES EXIST. CHECK WITH YOUR LOCAL AUTHORITY FOR
RECYCLING ADVICE.
32
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
PRODUCT GUARANTEE
Thisproductisguaranteedagainstmanufacturingdefectsforaperiodof
Year
Thisproductisguaranteedfortwelvemonthsfromthedateoforiginalpurchase.
Anydefectthatarisesduetofaultymaterialsorworkmanshipwilleitherbereplaced,refundedorrepairedfreeofchargewherepossibleduringthisperiodbythe
dealerfromwhomyoupurchasedtheunit.
Theguaranteeissubjecttothefollowingprovisions:
-
Theguaranteedoesnotcoveraccidentaldamage,misuse,cabinetparts,knobs
orconsumableitems.
-
Theproductmustbecorrectlyinstalledandoperatedinaccordancewiththe
instructionscontainedinthismanual.
-
Itmustbeusedsolelyfordomesticpurpose.
-
Theguaranteewillberenderedinvalidediftheproductisre-soldorhasbeen
damagedbyinexpertrepair.
-
Specificationsaresubjecttochangewithoutnotice.
-
Themanufacturerdisclaimsanyliabilityfortheincidentalorconsequentialdamages.
-
Theguaranteeisinadditionto,anddoesnotdiminishyourstatutoryorlegal
rights.
-
Intheeventofaproblemwiththeproductwithintheguaranteeperiodcallthe
customerhelplineon08456040105
Guarantor:ArgosLtd
489-499AveburyBoulevard
CentralMiltonKeynes
MK92NW
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
33
4-08
3A
Q41G26MV672 5A
Download PDF

advertising