Operating instructions | Bosch Appliances BOSCH Dryer Clothes Dryer User Manual

OPERATING INSTRUCTIONS
DiBos
4.998.137.631 A1
OPERATING INSTRUCTIONS
Contents
Introduction and safety instructions . . . . . . . . . . . . . . . . . . . 3
Introduction to the system
Password
Logging on
Changing users/logging off
Exiting the system / ending the program
4
4
4
4
4
The basic live image window
General information
Basic window menu bar
Basic window toolbar / alarm simulation bar
Basic window status bar / connection window
5
6
7
8
9
Controlling a dome camera
10
The basic image archive window
Image archive menu bar
Image archive toolbar
Image archive toolbar / alarm simulation bar
Image archive status bar / connection window
Recorder buttons
12
13
14
15
16
BOSCH Security Systems GmbH
Looking at, printing, saving, swapping out,
and deleting archive images
17
Deleting archives / searching for archive
images and additional data
18
Connecting backup drive and / swapping
out archive images on diskette
19
Formatting a CD
20
Swapping out data on CD
22
Alarm simulation
23
Connection with a remote station
24
Searching for and looking at archive
images from the remote station
26
Notes
27
–2 –
A1 02.03
Introduction and safety instructions
What do these operating instructions tell you?
These operating instructions provide you with all relevant information that
you need in order to perform the tasks described in the table of contents
quickly and easily.
You will find more detailed information about the respective screens online
on your system if you press the F1 key or click the Help button.
Caution!
To avoid electrical shock, do not remove the cover. Leave all
maintenance to qualified personnel.
Warning!
To avoid fire or electrical shock, never expose the device to rain or
humidity.
Note
It your are not able to accomplish some of the described steps of
this manual, it may be that you don’t have the rigth authority level.
In this case please contact your authorized dealer.
Notes on cleaning
When cleaning the surface, be sure that you do not use any
caustic or scrubbing cleansers and that no liquid gets inside the
device.
The device may only be operated by trained
persons! For security reasons and in order to avoid faulty
operation, any authorization code required for operation
should only be communicated to these persons.
Warning!
Installation should only be undertaken by qualified customer service
personnel in accordance with all applicable electrical regulations.
Power connection!
Devices with or without power cords have voltage in the device as
soon as the power cord is plugged into the outlet. However, the
device is only ready for use if the power switch (ON/OFF) is on ON.
If you unplug the power cable from the outlet, the voltage supply to
the device is completely halted.
Service station:
Telephone:
BOSCH Security Systems GmbH
–3 –
A1 02.03
Introduction to the system
When the computer is booted, the system runs automatically in the background and is able to respond to signals and record images. You
must only log on if you wish to perform operating tasks. Only authorized users have access to operate the system, based on a password.
Depending on your access privileges, with the user interface you can:
·view live images for monitoring purposes and manually switch camera views
·open the image archive and retrieve, print, and delete saved images
·perform system configuration
·perform an alarm simulation
You must log on to the system in order to commence operation.
After you have switched on the system and the live image screen appears, you will see a dialog box in the middle of the screen that invites
you to log on.
Password
Exiting the system / ending the program
For the password, there are no restrictions as to the type and number
of characters permitted.
You can change the password on the System menu.
Select System from the menu bar and click Exit system.
Logging on
Logon screen
Enter your user name and password and confirm with OK. You are
now on the live image.
The live image consists of the live image basic window, which is also
displayed if no video station was selected or one or several
connection windows
Changing users/logging off
On the System menu, you can change users or log off. During a
change of user, the system continues to run in the background. This
is recommended if you leave the system.
BOSCH Security Systems GmbH
–4 –
A1 02.03
The basic live image window
General information
1
4
The basic live image window
1 Menu bar
2 Toolbar
3 Status bar
5
2
6
Connection window
4 Title bar of the connection window for the
selected station
5 Display all configured cameras of the
selected station
6 Display of selected camera images
7 Display of status of all configured alarm
inputs of the selected station and re
lay statuses
7
3
Display of several live images
You can display several live images, depending on the number of connected and configured cameras. The live images are always arranged
automatically from left to right in consecutive rows.
For each camera marked with a
BOSCH Security Systems GmbH
, a live image is shown.
–5 –
A1 02.03
The basic live image window
General information
Camera deactivated
Camera activated: if you click this box, you can activate the camera and show the live image.
If several cameras are selected and activated with the left mouse button (highlighted in blue), these camera images can
all be shown together. Click
to show and hide the camera images.
If you click the Ctrl key and click the left mouse button on selected cameras, you can combine these into non–continuous
camera blocks.
If you click the Shift key and click the left mouse button on the first and last selected cameras, you can create continuous blocks.
If you click this button (in the upper right corner), you will minimize (depending out the configuration) the basic window.
This gives you the opportunity to look at the minimized images and to edit texts in the interface simultaneously.
Click to return to a full–sized image.
BOSCH Security Systems GmbH
–6 –
A1 02.03
The menu bar of the basic window in the live image
System
Image archive:
Configuration:
Alarm simulation:
Change user:
Change password:
Exit system:
Windows
change to the image archive
change to the configuration
trigger an alarm or other actions
log the user off and log on screen for new
user
change the password
end the program (administrator)
Tile:
Cascade:
Arrange icons:
Station X:
open windows are displayed next to one another
open windows are displayed overlapping one
another (cascading)
icons can be deposited at the bottom of the window
all stations with a connection are displayed
Connection
?
Establish connection: establish connection via ISDN/network/
modem
Terminate connection: terminate connection via ISDN/network/
modem
Local connection:
establish local connection (live image)
Help topics:
Info:
calling up online Help
Info about the system, e.g. version and
serial number
Camera
Camera switching:
Image quality:
images:
to the next camera selected with
image compression can be changed
save displayed
Activate and deactivate automatic saving
from all images displayed
View
Toolbar:
Status bar:
Alarm simulation bar:
Full Screen mode:
on/off
on/off
on/off
enlarges the image of the selected camera
to full–screen size
BOSCH Security Systems GmbH
–7 –
A1 02.03
Basic window toolbar / alarm simulation bar in live image
Icon
Name
Explanation
Icon
Name
Explanation
Image
archive
Look at, search for, swap out or print
saved images in local/remote archives.
Automatic
camera
switchover
Configuration
Hardware, image saving, image
transmission, and user settings.
Not active with integrated operating
station.
The configured alarm simulation
buttons will be called up.
Help
If you place the mouse pointer over an
object, you will receive help with that
object.
Alarm
simulation
Buttons for the configured alarm
simulation signals or other configured
actions.
Alarm
simulation
Connect
with
a
remote
(network/ISDN/DSL/modem)
Terminate
established
terminated.
Local
connection
connection
station
will
The alarm simulation bar can be embedded in the toolbar or
free–standing.
be
Embedded
Alarm simulation 1 triggered
Alarm simulation 2 not triggered
Connection will be established to the
local system.
Full Screen
mode
Enlarges the image of the selected
camera to full–screen size.
Save images
displayed
Activate, deactivate automatic saving of
all
images
displayed.
With
simultaneous generation of a separate
archive in the image archive with the
name <Computername>_normal.
BOSCH Security Systems GmbH
Switchover of all cameras displayed.
–8 –
Alarm simulation 3 and 4 not configured
Free–standing
A1 02.03
Basic window toolbar / connection window in live image
The Status bar (lowermost line of the screen) contains help
information about the menu you are currently using. It shows the
name of the remote station to which an external connection has just
been established.
Display of the configured alarm inputs
The lower portion of the image displays all configured alarm inputs.
The Title bar contains:
– the window title with the name of the selected station and
– the buttons to minimize, maximize and close the window.
Configured alarm inputs are displayed
in the live image
Contact input or video motion detector of
a camera
Foyer card reader / barcode reader
Clicking minimizes the window and places it at the bottom
edge of the screen.
on
Clicking restores the window to normal size.
Configured relay outputs can be activated
and deactivated by clicking with the right
mouse button
Status display of the configured alarm inputs
Terminates the existing connection
The statuses of all configured alarm inputs are displayed as follows.
Display of the existing / approved cameras
no icon
On the left side of the screen, you will find a list of the configured
cameras.
BOSCH Security Systems GmbH
Input has triggered
?
Existing / approved cameras will be
displayed in live image.
–9 –
Input is in standby
Input does not exist as hardware
A1 02.03
Control of a dome camera
Configured dome camera
If a dome camera is configured, an arrow will appear in its live
image if the user moves the mouse (variable speed) over the live
image. With the left mouse button, you can control the camera in
the direction of the activated arrow.
e.g. to the left
e.g. up
e.g. to the right
e.g. down
A magnifying glass appears in the middle of the screen. If
you see a + sign, this means that you are zooming in on
the image. If you see a – sign, the camera angle is getting
larger.
+
Zoom in: reduce camera angle (zoom in)
–
Zoom out: enlarge camera angle (zoom out)
Note
Depending where you place the mouse cursor you operate with a
variable speed.
By clicking the right mouse button on the live image, you activate
the following menu:
– Dome camera control
– Presets saved
– Macros saved
Dome camera control
Here you can set the focus (sharp/ blurred) and aperture (open /
close).
Presets saved
In the configuration, you can call up set camera positions here.
Macros saved
Call up saved camera commands.
(Start/end macros).
Note
Presets and macros are to be configured in the set up in
advance.
Please also use the online help
BOSCH Security Systems GmbH
– 10 –
A1 02.03
The image archive of the basic window
Information about image archive
You can also use the Image archive menu to open and close live image display. It enables access to and searching in:
– local and remote video system image archives and
– existing files on hard disk or diskettes.
In
·
·
·
the image archive you have the following possibilities:
Start configuration (in addition to the image archive)
Call alarm simulation
Establish an ISDN, network or modem connection to a remote station (in addition to the connection to the local station);
the remove archive tree is thus shown under the local archive tree
· Swap out saved images
· Print saved images
· Search for saved images
Basic live image window
1 Menu bar of the image archive basic window
2 Toolbar of the image archive basic window
3 Status bar of the image archive basic window
4 Tree structure of configured archives
Image display window
5 Title bar of saved image
6 Display of saved images
7 Recorder buttons for playing back saved
images
8 Print the displayed image
9 Save images on drive or diskette
10 Set the playback speed
11 Scrollbars for setting image playback
speed
12 Image information about the saved image
e.g. date, time, camera no., image resolution, etc.
BOSCH Security Systems GmbH
– 11 –
A1 02.03
The image archive of the basic window
Several archive images tiled
You can display several archive images next to one another (tiled), up to a maximum of 8. The archive images are always arranged from left
to right consecutively and in a row. In each image, you can use the functions of the recorder buttons.
Selecting menu tree for archive images
BOSCH Security Systems GmbH
Example of image archives
– 12 –
A1 02.03
Image archive menu bar
System
Database
Live image:
Configuration:
Alarm simulation:
Search dialog
(individual images):
Search dialog
(Smart Search):
change to the live image
change to the configuration
trigger an alarm (depending on the
configuration)
Close image archive: close image archive basic window, return
to the live image
Exit system
log off the system
Connect
Establish connection: establish connection via
network/ISDN/modem
Terminate connection: terminate connection via
network/ISDN/modem
File
Open:
Logbook:
Print comment:
Setup printer:
open files to compare images
search for saved files
enter a print comment about the
current cluster
vary the print image layout, setup
or selection of available printers
BOSCH Security Systems GmbH
find images in archives
the search dialog enables searching
for and finding images in which motion has
occurred
Update archive list:
changes will be saved
Database information: query about type, size, etc.
Show backup drive: show and select
Swap out backup:
on external data medium
see also searching for archive images
View
Toolbar:
on/off
Status bar:
on/off
Alarm simulation bar: on/off
Archive list:
on/off
?
Help topics:
Info:
– 13 –
call up online Help
Info about the system, e.g. version and
serial number
A1 02.03
Image archive toolbar
Icon
Name
Live
image
Icon
Explanation
Switchover to live image display.
Name
Explanation
Print
The selected image can be printed with
additional information.
Configuration
Hardware, image saving, image
transmission, and user settings.
Not active with integrated operating
station.
Search
dialog
(single
image)
Search and find images in local or
remote archives and their automatic
saving.
Alarm
simulation
Alarm simulation can be called up
depending on the configuration.
Images in
original size
Possible display of the image in original
size.
Connect
Establish a connection with a remote
station via ISDN/network/modem.
Terminate
Established
terminated.
connection
will
be
Open
Image archives located on hard disk or
diskette can be opened and displayed.
Save as
Selected images can be swapped out
on hard disk or diskette.
Image
information
on/off
The display of image information can be
deactivated in favor of a larger window
display.
Archive
list on/off
Display of the archive list can be
deactivated.
Arrange all
windows
Automatically arranges all windows.
Help topics
Call up online Help
Help
BOSCH Security Systems GmbH
– 14 –
Help for image archive
A1 02.03
Image archive toolbar / alarm simulation bar
Icon
Name
Explanation
Alarm
simulation
Buttons for the configured alarm
simulation signals or other configured
actions.
The alarm simulation bar can be embedded in the toolbar or
free–standing.
Embedded
Alarm simulation 1 triggered
Alarm simulation 2 not triggered
Alarm simulation 3 and 4 not configured
Free–standing
BOSCH Security Systems GmbH
– 15 –
A1 02.03
Image archive status bar / connection window / recorder buttons
The Status bar (lowermost line of the screen) contains help
information about the menu you are currently using. It shows the
name of the remote station to which an external connection has just
been established.
The recorder buttons
Save as
First cluster image
The Title bar contains:
– the window title with the name of the selected station and
– the buttons to minimize, maximize and close the window.
Playback backwards
Previous cluster image
Print
Last cluster image
Film stop
Clicking minimizes the window and places it at the bottom
edge of the screen.
Replay forwards
Next cluster image
Changes the playback speed.
Clicking restores the window to normal size.
Terminates the existing connection
Jumps ahead within the images of a cluster.
Display of configured archives
On the left side of the
screen, you will find a list of
the configured archives.
This information (detected motion in the image)
is only available for images that were recorded
with activated motion detection function.
Example: movement in image
BOSCH Security Systems GmbH
– 16 –
A1 02.03
Looking at, printing, saving, swapping out, and deleting archive images
You are now on the live image means you are logged into the
system.
1. From the System menu, select the Image
archive command. The image archive will be
opened.
2. Open the archive by clicking in front of the
archive name.
3. Double–click on the first entry of the relevant day.
You will see the first image of the saved film
sepuence.
4. Let the film run ventually reduce the playback
speed. To do this, use the recorder buttons at the
bottom of the image window.
Print archive1. Use the recorder buttons to navigate to the
images
images that you would like to print. Keep in mind
that you can only print the image that is currently
displayed on the screen.
2. If necessary, change the format on the
File/Setup printer menu and on the File/Print
comment menu, enter a comment about the
cluster. This note will only be printed in panel
format.
3. Click the Print icon, which you will find at the
buttons of the image window.
Save archive
Use the recorder buttons to navigate to the
images
images that you would like to save. Keep in mind
that you can only save the image that is currently
displayed on the screen.
Click on the Save icon, which you will find at the
bottom of the image window and on the Save as
dialog box, enter the file name with the ending
.jpg. Saving will occur without any additional image
information!
or with the ending HTML (recommended). Saving
occurs with additional image information!
Swap out
archive
images
Looking at
archive
images
BOSCH Security Systems GmbH
Delete
archive
images
Attention:
– 17 –
1. Your backup drive must be connected. If not,
please connect it.
2. From the Database menu, select the command
Show backup drive. A dialog box for selecting
the backup drive appears.
3. On the Selection backup drive dialog box, click
on the drive. Confirm with OK.
4. From the Database menu, select the
Swap out backup command. A dialog box for
searching the archive will open.
5. Enter the archive to be swapped out and if
necessary, additional criteria, and click the Search
button.
The system will search.
6. Enter the backup archive name and confirm with
OK.
7. On the Database menu, deactivate the command
Show backup drive.
Before exiting the system, make sure there is
sufficient storage space, e.g. by deleting. If you
click the left mouse button on the relevant cluster
and then click the right mouse button, you will
delete it.
Some backup drives may only be removed or
connected when DiBos is switched off!
For details, read the manual for your backup drive.
A1 02.03
Deleting archives / searching for archive images and additional data
Search dialog
(single images)
You are now on the live image
Deleting
old search
results
Image
search for
additional
data
1. From the System menu, select the
Image archive command. The image archive will be
opened.
2. On the archive tree, click on the + sign in front of
the archive. The archive will be opened, the image
clusters will be shown.
3. Select the clusters to be deleted in the
archive by clicking with the right mouse button
and selecting the
Delete command from the menu that opens. You will
see another confirmation box.
4. Confirm the deletion with Yes.
5. From the Database menu, select the
Search (single images) command. A dialog box for
searching the archive will open.
6. Enter the search criteria and/or the archives to be
searched and click the Search button.
The images found will be saved in the local archive
Search results.
7. The images found in the search results archive
can be looked at, printed, saved, and swapped out.
Search dialog
(motion information)
Note
This function is only working for images
which one record through the internal
motion detection, not for continously
recorded images.
BOSCH Security Systems GmbH
– 18 –
For a targeted search, an
image selection can be
displayed on the camera
image. If you click the left
mouse button, you will see
a (+) sign. You can set
several selections next to
one another or individually.
If you click the right mouse
button, you will see a (–)
sign. Now you can modify
or remove image
selections. Enter the
search criteria and click
Search.
A1 02.03
Connecting backup drive and / swapping out archive images on diskette
Saving saved archive images on diskette
Saving
1. Carry out steps 1 – 4 under Looking at
archive images
saved archive images.
(single images) 2. Use the recorder buttons to navigate to the
images that you want to save. Keep in mind
mind that you can only save the image that is
currently displayed on the screen.
3. Click on the Save icon, which you will find at
the bottom of the image window and on the
Save as dialog box, enter the file name with
the ending .jpg.
Swapping out saved archive images on a backup drive
Images
Connecting a backup drive
Connect
backup
drive
1. Exit DiBos from the System menu with the
Exit DiBos command . You must have
administrator authorization to do this.
2. Switch the computer off.
3. Connect the backup medium.
4. Switch the computer on and log on.
BOSCH Security Systems GmbH
– 19 –
1. Your backup drive must be connected. If not, see
Connecting a backup drive.
2. From the System menu, select the Image archive
command. The image archive will be opened.
3. From the Database menu, select the
Show backup drive command . A dialog box for
selecting the backup drive appears.
4. On the Select backup drive dialog box, click on
the drive. Confirm with OK.
5. From the Database menu, select the
Swap out backup command. A dialog box for
searching the archive will open.
6. Enter the archive to be swapped out and, if
necessary, additional criteria and click Search.
The system will search.
7. Enter the new backup archive name and
confirm with OK.
8. On the Database menu, deactivate the command
Show backup drive.
A1 02.03
Formatting a CD
Call up the taskbar. It is located below your status bar. If it is not shown, call it up with the keyboard using the Windows key. You will find the CD
icon on the right side of the taskbar. Click on the dialog box for the desired action and confirm. Formatting (CD RW) can take up to 20 minutes.
Bosch recommends using CD-R discs as they do not require as long of a formatting time.
If you see a red character, this CD
is already formatted.
Enter a name. Continue
with Start format. The CD
is formatted.
Double–click on this icon. If the
icon does not have a red
character, this CD must be
formatted.
After you double–click,
this dialog window will be
activated. Place a blank
CD in the drive and
clickFormat CD.
The CD is ready for read/write
access. Confirm with OK
BOSCH Security Systems GmbH
– 20 –
A1 02.03
Formatting a CD
If you want to eject the
CD, click the Eject button.
Click next to one of the
options and confirm with
OK.
BOSCH Security Systems GmbH
– 21 –
A1 02.03
Swapping out data on CD
Change from the live image to the image archive. Proceed as follows:
– Place a formatted CD in the drive
From the Database menu,
– select
– Show backup drive and confirm
From the Database menu,
– select Swap out backup
– the Search in image archive dialog box will appear
From the Database menu,
click Show backup drive
Click the CD icon
click Eject
Select the corresponding option and
confirm with OK
The CD is ejected
Enter the Date, Time, Camera no. and the Remote station. Click
search.
– The name of the backup archive will be shown
– Confirm or change archive name and confirm
– The Remote backup storage dialog box will appear
– Data will be swapped out
– Wait until the search procedure has ended
– Click Finish
BOSCH Security Systems GmbH
– 22 –
A1 02.03
Alarm simulation
If alarm simulation signals are configured, you will be able to see
this from the buttons shown (see alarm simulation bar) and from
whether the Alarm simulation element is active on the System
menu.
If you select alarm simulation, a dialog box in which you can trigger
alarms for a maximum of four detectors will appear. Another click
on the alarm button will cancel the simulation.
The alarm is represented on the simulation
detector (connection window) by a red
exclamation point.
A second possibility for alarm simulation is to use the alarm
simulation bar.
To carry out an alarm simulation, click on the
corresponding simulation button. Thus the color of
the button changes and the alarm is represented
on the simulation detector (connection window) by
a red exclamation point.
BOSCH Security Systems GmbH
– 23 –
A1 02.03
Connection with a remote station
Incoming alarm connection
You are on the live image view of an image receiver
Automatic
connection
established
by a remote
station on
alarm
On alarm, an external station automatically
establishes image transmission to your system
and the images transmitted can be saved
automatically by the receiver in the archive
<Remote station> Alarm.
Camera
selection for
external station
Activating/
deactivating/
saving
on the image
receiver
Disconnect
BOSCH Security Systems GmbH
– 24 –
Click on the icons for the individual cameras to
see their images.
On the Display menu, you can display several
cameras per remote station simultaneously.
During image transmission, you can cancel
image saving. This can be useful if no relevant
procedures are running and you wish to save
storage space in your archive.
In this case, deactivate by clicking
· Save received images
on the Camera menu or
· the icon on the right–hand side of the screen
red circle).
Note: Deactivating the saving process relates
only to the current signal. A new signal
is saved automatically.
If saving should be continued, activate it by
clicking
·the Save received images command from the
Camera menu or
· the icon on the right–hand side of the screen.
On the Connect menu, click the command and
confirm the query as to whether you really want
to disconnect with Yes.
A1 02.03
Connection with a remote station
Looking at live images, performing control procedures on a
remote station
You are now on the live image
Establish
connection
Select
camera
From the Connection menu, select the
Connection command.
The Connection dialog box opens.
Select the desired connection type, e.g.
ISDN/network.
Click on the remote station in the list box and
confirm with OK.
The connection to the remote station is
established.
In the image window, on the icons for the
individual cameras to see their images. On the
Display menu, you can display several cameras
per remote station simultaneously.
BOSCH Security Systems GmbH
Control
relay
outputs
Disconnect
– 25 –
From the Camera menu, select the Camera
switchover command.
The Automatic camera switchover dialog box
opens.
In the dialog box, specify the cameras that should
be affected by the switchover. If necessary,
consult the online Help.
From the Relay menu, select the Relay...
command. The relay output is controlled (e.g. light
on). Clicking the command again will reset the
control procedure.
On the Connect menu, click the Disconnect
command and confirm the query as to whether you
really want to disconnect with Yes.
A1 02.03
Searching for and looking at archive images from the remote station
You are now on the live image
Open image
archive
Establish
connection
Select
remote
station
From the System menu, select the Image
archive command. The image archive will be
opened.
From the Connection menu, select the
establish connection command.
The Connection dialog box opens.
Select the desired connection type, e.g.
ISDN/network/modem.
Click on the remote station in the box and
confirm with OK. The connection to the remote
station is established. In the archive tree, the
archives of the remote station will appear under
its name.
By selecting the remote station, you can
the area to be searched on the remote station
on the next dialog; you can limit the search area
to particular archives.
BOSCH Security Systems GmbH
Search for
images on
the remote
station
Looking at
archive
images of
the remote
station
Disconnect
– 26 –
From the Database menu, select the
Search dialog (single images) command. A
dialog box for searching the archive will open.
Enter the search criteria and/or the archives to be
searched and click the Search button. The
images found will be saved on your system in the
<Remote station> Search archive.
Open the archive by clicking on the symbol
in front of the archive name.
Double–click on the relevant entry. You will see the
first image of the saved film sequence.
Let the film run. To do this, use the recorder
buttons at the bottom of the image window.
On the Connection menu, click the Disconnect
command and confirm the query as to wheter you
really want to disconnect with Yes.
A1 02.03
Notes
BOSCH Security Systems GmbH
– 27 –
A1 02.03
Bosch Security Systems
850 Greenfield Road, Lancaster, PA 17601
Phone: 800-326-3270, Fax: 717-735-6560
614–4.998.137.631
Edition: 2
Status: February 03
Download PDF

advertising