Bosch Appliances LTC 0620 Digital Camera User Manual

Video | LTC 0620 Series DinionXF Day Night Cameras
LTC 0620 Series DinionXF Day Night
Cameras
www.boschsecurity.com
The LTC 0620 High Performance 1/2-inch Digital CCD
Day/Night Camera ensures the highest image quality
possible at any time. Depending on the available light
the camera will automatically switch from color to
monochrome.
A unique combination of 15-bit digital video
processing that enhances sensitivity and XF-Dynamic
which extends the dynamic range provides a sharper,
more detailed image with outstanding accuracy in
color reproduction.
All Dinion cameras are supplied ready to operate.
Simply attach and focus the lens, then connect power.
No tools are required for back focus and power
connection. For especially challenging situations
where fine tuning or special settings are required, the
camera parameters can be individually set using the
control buttons on the side of the camera and Onscreen Display (OSD). The camera automatically
detects the lens type. The Lens Wizard ensures
accurate back-focusing for perfectly sharp pictures at
all times.
u
15-bit DSP Technology
u
Superb sensitivity
u
Mechanically switching IR filter for IR sensitivity at
night
u
XF-Dynamic for unsurpassed wide dynamic range
u
Bilinx Communication for remote set-up and control
Functions
XF-Dynamic
The highly accurate 15-bit digital signal is
automatically processed to optimally capture the
detail in both the high and low light areas of the scene
simultaneously, maximizing the information visible in
the picture.
Bilinx Technology
Bilinx is a bidirectional communication capability
embedded in the video signal of all Bosch Dinion
cameras. Technicians can check status, change camera
settings and even update firmware from virtually
anywhere along the video cable. Bilinx reduces service
and installation time, provides for more accurate setup and adjustment, and improves overall performance.
In addition, Bilinx uses the standard video cable to
transmit alarm and status messages, providing
superior performance without additional installation
steps.
Video Motion Detection
The built-in video motion detector allows you to select
up to four fully programmable areas with individual
thresholds. The global scene change detector
minimizes false alarms caused by sudden lighting
2 | LTC 0620 Series DinionXF Day Night Cameras
condition changes, such as switching on or off the
indoor or security lighting. When motion is detected
alarms may be displayed in the video signal while the
output relay can be closed in addition to alarm
message transmission on Bilinx.
Auto Black
The automatic black level feature enhances contrast by
compensating for reduced contrast (i.e. glare, fog,
mist).
Default Shutter
The LTC 0620 features a fast, default shutter speed in
sufficient lighting conditions to capture moving
objects. When light levels fall and other adjustments
have been exhausted, the shutter speed reverts to the
standard setting to maintain sensitivity.
Safety
LTC 0620/11 and LTC 0620/51: EN60065
LTC 0620/21 and LTC 0620/61: UL6500, cUL CAN/CSA E60065-00
Region
Certification
Europe
CE
Declaration of Conformity
USA
FCC
Declaration of Conformity
Installation/configuration notes
Back Light Compensation (BLC)
Offering a fully programmable BLC area of interest,
and a variable BLC level, the camera can be easily set
up for even the most challenging entrance
applications.
Lens Wizard
The Lens Wizard automatically detects the lens type
and helps focus the lens at the maximum opening to
ensure proper focus is maintained throughout the 24hour cyle. No special tools or filters are required.
Programmable Modes
Three independent, preprogrammed operating modes
support typical applications, but are fully
programmable for individual situations. Switching
between modes is easy via Bilinx or the external alarm
input.
Day/Night Mode
The Day/Night Mode LTC 0620 provides enhanced
night viewing by increasing the IR sensitivity. The IR
filter can switch from color to monochrome
automatically by either sensing the illumination level or
via the alarm input. The filter can be switched
manually via the alarm input, through the camera
menu or via the Bilinx coaxial control interface. An
internal through the lens IR detector enhances the
monochrome mode stability, as it prevents reverting to
the color mode when IR illumination is dominant.
Dimensions in mm (inches)
Parts included
Quantit
y
Component
1
LTC 0620 Series DinionXF Day\Night Camera
1
C/CS – mount conversion ring
1
Spare male 4–pin lens connector
Lens not included
Technical specifications
Electrical
Model No.
LTC 0620/11
Rated Voltage
12–28 VAC
45–65 Hz
SensUp
By increasing the integration time on the CCD up to 10
times, the effective sensitivity is dramatically
enhanced. This is especially useful when relying only
on moonlight for illumination.
LTC 0620/21
Certifications and approvals
LTC 0620/51
85–265 VAC
45–65 Hz
LTC 0620/61
85–265 VAC
45–65 Hz
Electro Magnetic Compatibility
Emission
EN55022 class B, FCC class B part 15
Immunity
EN50130-4 Alarm Systems, Part 4
Vibration
Camera with 500 g (1.1 lbs) lens according to
IEC60068-2-27
11–39 VDC
12–28 VAC
45–65 Hz
11–39 VDC
Power Consumption
4W
Imager
Interline transfer CCD, 1/2-inch image
format
3 | LTC 0620 Series DinionXF Day Night Cameras
Active Pixels
PAL Model
752 H x 582 V
NTSC Model
768 H x 492 V
Camera ID
16 character editable string, position
selectable
Lens Types
Manual, DC- and Video-iris auto-detect
with override
DC-iris drive: max. 50 mA continuous
Sensitivity (3200 k)
Sensitivity (full video)1)
1.4 lux (0.14 fc)
Sensitivity 50 IRE1)
0.31 lux / 0.052 lux
(0.031 fc / 0.0052 fc) (Monochrome
Mode)
Minimum illumination1)
0.18 lux / 0.024 lux
(0.018 fc / 0.0025 fc) (Monochrome
Mode)
Video iris: 11.5 ± 0.5 VDC, max. 50 mA
continuous
Remote Control
Bilinx coaxial communication
1) F/1.2, 89% reflection, SensUp off
Mechanical
Dimensions (H x W x L)
59 x 67 x 122 mm (2.28 x 2.6 x 4.8 in.)
without lens
Weight
450 g (0.99 lbs) without lens
Tripod Mount
Bottom (isolated) and top 1/4-inch 20 UNC
Controls
OSD with softkey operation
Minimum Illumination
with SensUp
0.018 lux / 0.0024 lux
(0.0018 fc / 0.00024 fc) (Monochrome
Mode)
Horizontal Resolution
540 TVL
Signal-to-Noise-Ratio
> 50 dB
Video Output
1 Vpp, 75 Ohm
Y/C Output
Y: 1 Vpp / C: 0.3 Vpp
Synchronization
Internal, Line Lock, HV-lock and Genlock
(Burst lock) selectable
Shutter
Auto (1/60 (1/50) to 1/500000), fixed,
flickerless, default
Sensitivity up
Off, automatic continuous up to 10x
Ordering information
Auto Black
On, off selectable
LTC 0620/11 DinionXF Day Night Camera
Range
32x dynamic range enhancement
1/2-inch, high performance, 540 TVL, PAL, DSP, 12 –
28 VAC/11 – 39 VDC, 50 Hz
Noise Reduction
Auto, off selectable
Order number LTC0620/11
Contour
Sharpness enhancement level selectable
LTC 0620/21 DinionXF Day Night Camera
BLC
Off, area and level selectable
1/2-inch, high performance, 540 TVL, NTSC, DSP, 12 –
28 VAC/11 – 39 VDC, 60 Hz
Gain
Auto (maximum level selectable to 28 dB)
or fixed level selectable
Lens Mount
CS (max lens protrusion 5 mm, 0.2 in.)
White Balance
ATW (2500–10000 K), AWB hold, manual
WB selectable
VMD
4 area, sensitivity selectable
Alarm Output
VMD or Bilinx
Alarm Input
(TTL)
Profile switching, +5 V nominal,
+40 VDC max.
Alarm Output Relay
Max. 30 VAC or +40 VDC, max. 0.5 A
continuous, 10 VA
External Synchronal
Input
75 Ohm or high impedance selectable
Cable Compensation
Up to 1000 m (3000 ft) coax without
external amplifiers (automatic set-up in
combination with coaxial communication)
Environmental
Operating Temperature
-20 °C to +50 °C (-4 °F to +122 °F)
Storage Temperature
-25 °C to +70 °C (-13 °F to +158 °F)
Operating Humidity
20% to 93% Relative humidity
Storage Humidity
Up to 98% Relative humidity
Order number LTC0620/21
LTC 0620/51 DinionXF Day Night Camera
1/2-inch, high performance, 540 TVL, PAL, DSP, 85 –
265 VAC, 50 Hz
Order number LTC0620/51
LTC 0620/61 DinionXF Day Night Camera
1/2-inch, high performance, 540 TVL, NTSC, DSP, 85 –
265 VAC, 60 Hz
Order number LTC0620/61
LTC 3764/20 Varifocal Lens IR corrected
1/2-inch, 4 –12 mm, DC-iris, C-mount, F1.2-360, 4-pin
Order number LTC3764/20
LTC 3774/30 Varifocal Lens IR corrected
1/2-inch, 10 – 40 mm, DC-iris, C-mount, F1.4-360, 4pin
Order number LTC3774/30
4 | LTC 0620 Series DinionXF Day Night Cameras
LTC 3783/50 Zoom Lens IR corrected
1/2-inch, 8.5 – 85 mm, Video-iris, C-mount F1.6-360, 4pin
Order number LTC3783/50
LTC 3793/50 Zoom Lens IR corrected
1/2-inch, 8 – 144 mm, Video-iris, C-mount, F1.6-360, 4pin
Order number LTC3793/50
TC120PS Power Supply Unit
110-120 VAC/15 VDC, 50/60 Hz, 300 mA
Order number TC120PS
TC220PS Power Supply Unit
230 VAC/12 VDC, 50 Hz, 10 VA
Order number TC220PS
TC220PSX‑24 Power Supply Unit
230 VAC/20 VAC, 50 Hz, 20 VA
Order number TC220PSX-24
TC1334 Power Supply Unit
120 VAC/24 VAC, 60 Hz, 30 VA
Order number TC1334
Software Options
VP‑CFGSFT Configuration Software
for cameras using Bilinx, includes VP-USB Adaptor
Order number VP-CFGSFT
Represented by:
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
© Bosch Security Systems 2013 | Data subject to change without notice
2099302795 | en, V2, 29. Mar 2013
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
apr.securitysystems@bosch.com
www.boschsecurity.asia
China:
America Latina:
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
201 Building, No. 333 Fuquan Road
Via Anhanguera, Km 98
North IBP
CEP 13065-900
Changning District, Shanghai
Campinas, Sao Paulo, Brazil
200335 China
Phone: +55 19 2103 2860
Phone +86 21 22181111
Fax: +55 19 2103 2862
Fax: +86 21 22182398
al.securitysystems@bosch.com
www.boschsecurity.com.cn
www.boschsecurity.com
Download PDF

advertising