N 87 00

N 87 00
Item ________________________________________
Quantity _____________________________________
N8700-R
CSI Section 11400
Approved ___________________________________
Date ________________________________________
Drop-In Curved Individually Controlled Heated Electric Food Wells
Models
N8744-R
N8759-R
N8776-R
N8794-R
Heated
Heated
Heated
Heated
food
food
food
food
wells,
wells,
wells,
wells,
fits
fits
fits
fits
two standard 12” x 20” pans
three standard 12”x 20” pans
four standard 12”x 20” pans
five standard 12”x 20” pans
N8776-R
Standard Features
• Top is constructed of 18-gauge stainless steel
• Flush mounted die stamped drawn 12” x 20”
individual 20-gauge wells
• Wells depressed slightly into the top to hold in
condensation
• Standard 1/2” stainless steel drain(s)
• Non-marring press fit top gasket
• Must be hard wired in the field
• Wet and dry operation
• 11.87” x 19.87” single hot food wells are
manifolded together standard to one main gate
valve
• Unit shall be insulated on all sides with 1” of
fiberglass and bottom to have 2” of fiberfrax
blanket insulation
• Individual infinite temperature controls standard
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
wired to one main control panel with 4’ of
conduit and wire. Field install control panel at
location
• Galvanized exterior body
• One year parts and 90 day labor standard
warranty
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Options &
Accessories
• Adapter plates and bars
• Single- or double-service flipup sneezeguards
• Flexishield® food shields, single
or dual service
• Omit drains and manifold
• 220 volt, 50 cycle electrical
system*
* Inclusion of this option will
alter electrical specifications of
the unit
Drop-In Curved Individually Controlled Heated Electric Food Wells
•
•
•
•
N8700-R:
Project ______________________________________
N8744-R
2-PAN STD.
RADIAL DROP-IN
CUTOUT DETAIL
40.48”
103cm
85˚
26.05”
66cm
26.05”
66cm
172.50˚
85˚
25.00”
64cm
25.00”
64cm
25.10”
64cm
95˚
172.50˚
15.92”
40cm
26.05”
66cm
15.92”
40cm
N8744-R Cutout Dimensions
19.75”
50cm
19.75”
50cm
9.08”
23cm
9.08”
23cm
19.56”
50cm
85˚
2-PAN STD.
RADIAL DROP-IN
CUTOUT DETAIL
3-PAN STD.
85˚
25.10”
64cm
17.06”
43cm
172.50˚
N8744-R Remote Control
95˚
Cutout Dimensions
15.92”
172.50˚
40cm13.78”
15.73”
40cm
17.06”
43cm
17.06”
43cm
19.56”
17.06”
43cm
19.56” 50cm
50cm
57.22”
145cm
172.50˚
25.10”
25.10” 64cm
25.00”
64cm
25.00”
64cm
25.00”
64cm
25.00”
64cm
13.78” 95˚
35cm
13.78”
35cm
15.73”
40cm
13.78”
35cm
15.73”
40cm
15.73”
40cm
15.73”
40cm
26.05”
66cm
9.08”
23cm
17.06”
N8759-R Cutout
17.06”Dimensions
43cm
9.08”
23cm
9.08”
23cm
17.06”
172.50˚ 43cm
19.56”
50cm
17.06”
43cm
172.50˚
85˚ 7.00” 18cm
14.50”
37cm
25.00”
64cm
25.10”
5-PAN STD.
64cm
4.62”25.00”
12cm
RADIAL DROP-IN
95˚
N8759-R Side View 64cm
CUTOUT
DETAIL
4-PAN STD.
25.10”
64cm
15.67”
40cm
95˚
15.73”
40cm
25.00”
64cm
13.78”
35cm
172.50˚
13.78”
35cm
13.78”
35cm
19.56” 172.50˚
50cm
25.00”
64cm
13.78”
35cm
95˚
85˚
25.00”
64cm
95˚
25.10”
15.67” 64cm
40cm
15.73”
40cm
17.06”
43cm
172.50˚
172.50˚
7.00” 18cm
N8759-R Remote Control
Cutout Dimensions
13.78”
35cm
19.5
50cm
172.50˚
25.00”
64cm4.62” 12cm 25.00”
64cm
17.06”
43cm
19.50”
50cm
25.00”
64cm
25.00”
172.50˚
64cm
172.50˚
10.31”
85˚
26cm
17.06”
43cm
43cm
19.50”
50cm
25.10”
64cm
25.10”
64cm 95˚
95˚
95˚
26.05”
66cm
RADIAL DROP-IN
CUTOUT DETAIL
85˚
85˚
25.00”
64cm
25.00”
64cm
64cm
172.50˚
172.50˚
172.50˚
25.00”
64cm
19.56”
50cm
19.56”
50cm
172.50˚
CUTOUT DETAIL
N8759-R Elevation View
15.73”
40cm
35cm
N8759-R
4-PAN STD.
3-PAN STD.
RADIAL DROP-IN
26.05”
RADIAL DROP-IN
66cm CUTOUT DETAIL
25.00”4.62” 12cm
64cm
25.10”
64cm
95˚
85˚
14.50
37cm
64cm
25.00”
64cm
95˚
85˚
85˚
10.31”
26cm
25.10”
25.00”
64cm
25.00”
64cm
15.92”
40cm
57.22”
145cm
57.22”
145cm
7.00” 18cm
172.50˚
25.00”
64cm
25.10”
64cm
19.56”
50cm
85˚
172.50˚
RADIAL DROP-IN
95˚
N8744-R Side View
CUTOUT DETAIL
N8744-R Elevation View
N8759-R Plan View
25.10”
64cm
95˚
9.08”
23cm
N8744-R Plan View
19.75”
50cm
19.75”
50cm
40.48”
103cm
40.48”
103cm
17.06”
43cm
172.50˚
172.50˚
17.06”
43cm
19.56”
50cm
172.50˚
172.50˚
85˚
3-PAN STD.
RADIAL DROP-IN
CUTOUT DETAIL
73.68”
187cm
13.78”
35cm
17.06”
43cm
172.50˚
25.00”
64cm
25.00”
64cm
172.50˚
172.50˚
85˚
25.00”
64cm
25.00” 172.50˚
15.92”
64cm
40cm
25.10”
64cm
25.00”
64cm
15.92”
40cm
25.00”
64cm
95˚
9.08”
23cm
26.00”
66cm
26.00”
66cm
9.08”
23cm
3-PAN STD.
RADIAL DROP-IN
CUTOUT DETAIL
25.10”
64cm
13.78”
17.06”35cm
15.73”
40cm
13.78”
35cm
N8776-R172.50˚Cutout Dimensions
85˚
172.50˚
19.50”
50cm
25.00”
17.06”
64cm
43cm
25.00”
64cm
25.00”
64cm
7.00” 18cm
172.50˚
13.78”
35cm
15.73”
40cm
17.06”
43cm
25.10”
64cm
5-PAN STD.
RADIAL DROP-IN
CUTOUT DETAIL
64cm
4-PAN STD.
RADIAL DROP-IN
CUTOUT DETAIL
15.67”
40cm
19.56”
50cm
25.00”
64cm
95˚
13.78”
35cm
13.78”
35cm
15.73”
40cm
89.80”
228cm
17.06”
43cm
17.06”
43cm
19.50”
50cm
17.06”
43cm
172.50˚
85˚
85˚
25.00”
64cm
RADIAL DROP-IN
CUTOUT DETAIL
N8794-R Plan View
25.10”
64cm
95˚
13.78”
35cm
13.78”
35cm
13.78”
35cm
15.67”
40cm
26.00”
66cm
4.62” 12cm
N8794-R Elevation View
25.00”
64cm
N8794-R Cutout Dimensions
9.08”
23cm
14.50”
37cm
9.08”
23cm
25.00”
64cm
95˚
26.00”
66cm
9.08”
23cm
7.00” 18cm
25.00”
64cm
25.00”
64cm
25.10”
64cm
15.67”
40cm
4.62” 12cm
19.50”
50cm
172.50˚
172.50˚
172.50˚
10.31”
26cm
25.10”
64cm
95˚
89.80”
228cm
26.00”
5-PAN STD.
66cm
25.10”
64cm
95˚
40cm
25.00”
64cm
25.10”
64cm
89.80”
228cm
25.00”
4.62” 12cm
64cm
N8776-R
Remote Control
13.78”
13.78”
172.50˚
35cm
Cutout
Dimensions
35cm85˚
15.67”
25.00”
64cm
25.00”
64cm
15.73”
40cm
7.00” 18cm
85˚
25.00”
64cm
13.78”
172.50˚
35cm
172.50˚
85˚
17.06”
43cm
17.06”
43cm
19.56”
N8776-R Side
View
50cm
95˚
19.50”
50cm
172.50˚
4.62”
64cm12cm
25.10”
64cm
7.00” 18cm
172.50˚
18.69”
25.00”47cm
15.73”
40cm
25.00”
64cm
25.00”
17.06”
43cm
95˚
172.50˚
14.50” 85˚
37cm
4.62” 12cm
15.73”
40cm
19.56”
50cm
43cm
85˚
95˚
9.08”
23cm
25.10”
64cm
95˚
19.56”
50cm
N8794-R
25.10”
64cm
172.50˚
95˚
73.68”
187cm
N8776-R Elevation View
19.56”
50cm
85˚
95˚
4-PAN STD.
26.00”
RADIAL
DROP-IN
66cm
CUTOUT DETAIL
17.06”
43cm
85˚
73.68”
187cm
19.56”
50cm
25.10”
64cm
15.73”
40cm
19.75”
50cm
85˚
2-PAN STD.
RADIAL DROP-IN
CUTOUT DETAIL
25.10”
64cm
95˚
19.75”
50cm
10.31”
26cm
25.00”
64cm
95˚
N8776-R
7.00” 18cm
85˚
25.00”
64cm
25.00”
64cm
25.10”
64cm
15.73”
40cm
N8776-R Plan View
19.56”
50cm
7.00” 18cm
18.69”
47cm
7.00” 18cm
22.88”
58cm
4.62” 12cm
4.62” 12cm
N8794-R Side View
N8794-R Remote Control
Cutout Dimensions
N8700-R
Drop-In Curved Individually Controlled Heated Electric Food Wells
Specifications
Top shall be one-piece 18-gauge stainless steel, with
die-stamped 19.87" x 11.87" (50.5cm x 30.2cm) openings
with depressed edges. Formed well below each opening
shall be 6.25" (15.9cm) deep. Each well shall have an
individual temperature control and 1000 watt heating
element attached to bottom of well. Each well shall be
equipped with a .5" female N.P.T. drain located in right rear
corner. All drains manifold to a .5" gate valve at the left.
Exterior housing shall be 20-gauge gal­va­nized steel. Unit
shall be insulated on sides and between wells with 1.00"
(2.5cm) fiberglass; bottom shall have 2.00" (5.1cm) blanket
insulation.
Unit shall have all individual controls wired to a control
panel for mounting in counter or at a remote location; 4'
(1.2 m) length of wiring and conduit are provided. Unit
shall have a three-wire electrical junction box to allow hardwiring at installation.
Specifications
Model
# Of 12”x 20”
Pans Held
Volts/Hertz/Phase
Amps
Watts
Ship Weight
N8744-R
2
120/60/1
16.6
2000
99lbs/45kg
N8759-R
3
208-230/60/1
15.0/16.0
3000/4000
134lbs/61kg
N8776-R
4
208-230/60/1
20.0/22.0
4000/4800
166lbs/75kg
N8794-R
5
208-230/60/1
24.0/27.0
5000/6000
186lbs/84kg
Delfield reserves the right to make changes to the design or specifications without prior notice.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Printed in the U.S.A.
DSN8700R
03/10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement