Specifications | Braun 350CC-4 Electric Shaver User Manual

Booklet, 105x148 mm, 32 p (incl. 4 p cover), 2/2c = HKS43N + black
S e rie s 3
+
–
390cc-4
98756809_390cc-4_Japan.indd 1
17.01.11 13:24
2
98756809_390cc-4_Japan.indd 2
17.01.11 13:24
3
98756809_390cc-4_Japan.indd 3
17.01.11 13:24
4
98756809_390cc-4_Japan.indd 4
17.01.11 13:24
5
98756809_390cc-4_Japan.indd 5
17.01.11 13:24
6
98756809_390cc-4_Japan.indd 6
17.01.11 13:24
Seri es 3
+
+
–
–
390cc-4
7
98756809_390cc-4_Japan.indd 7
17.01.11 13:24
s
rie
Se
3
STOP
+
–
390
4
cc-
8
98756809_390cc-4_Japan.indd 8
17.01.11 13:24
S e ri e s 3
+
–
390cc-4
STOP
9
98756809_390cc-4_Japan.indd 9
17.01.11 13:24
10
98756809_390cc-4_Japan.indd 10
17.01.11 13:24
+
90°
11
98756809_390cc-4_Japan.indd 11
17.01.11 13:24
1
2
new
12
98756809_390cc-4_Japan.indd 12
17.01.11 13:24
+
lock
+
k
loc
13
98756809_390cc-4_Japan.indd 13
17.01.11 13:24
-
+
+
lock
new old
14
98756809_390cc-4_Japan.indd 14
17.01.11 13:24
full
lo
ck
click!
oi
l
15
98756809_390cc-4_Japan.indd 15
17.01.11 13:24
16
98756809_390cc-4_Japan.indd 16
17.01.11 13:24
17
98756809_390cc-4_Japan.indd 17
17.01.11 13:24
+
–
18
98756809_390cc-4_Japan.indd 18
17.01.11 13:24
19
98756809_390cc-4_Japan.indd 19
17.01.11 13:24
20
98756809_390cc-4_Japan.indd 20
17.01.11 13:24
g
1
2
3
Se ri es 3
4
+
5
6
7
+
11
–
–
s
ie
Se
r
3
+
9
10
370
350
4
c0c
39
390cc-4
–
390
8
12
STOP
21
98756809_390cc-4_Japan.indd 21
17.01.11 13:24
A
+
90°
full
full
lo
B
ck
click!
oil
22
98756809_390cc-4_Japan.indd 22
17.01.11 13:24
C
1
2
1
2
new
3
a
•••
4
b
5
•••
c
+
new
old
+
-
-
loc
+
loc
k
-
+
+
k
k
loc
23
98756809_390cc-4_Japan.indd 23
17.01.11 13:24
English
Our products are designed to meet the highest standards of quality,
functionality and design. We hope you enjoy your new Braun Shaver.
Warning
Your shaving system is provided with a special cord set, which has an
integrated Safety Extra Low Voltage power supply. Do not exchange or
tamper with any part of it, otherwise there is risk of an electric shock.
Do not shave with a damaged foil or cord.
This appliance is not intended for use by children or persons with reduced
physical or mental capabilities, unless they are given supervision by a person
responsible for their safety. In general, we recommend that you keep the
appliance out of reach of children. Children should be supervised to ensure
that they do not play with the appliance.
Description
1
2
3
4
5
6
7
8
9
10
11
12
Foil & Cutter cassette
Long hair trimmer
Precision setting switch (« ») (390cc/370cc only)
On/off switch
Charging lights (green)
Low-charge light (red)
Cleaning light (yellow)
Replacement light for shaving parts
Shaver power socket
Special cord set
Travel pouch (390cc/370cc only)
Foil protection cap (350cc only)
Charging
The best environmental temperature for charging is between 15 °C to 35 °C.
Do not expose the shaver to temperatures higher than 50 °C for extended
periods of time.
• Using the special cord set (10), connect the shaver to an electrical outlet
with the motor switched off.
• When charging for the first time or when the shaver is not used for a few
months, leave the shaver to charge continuously for 4 hours. Subsequent
charges will take about 1 hour.
24
98756809_390cc-4_Japan.indd 24
17.01.11 13:24
• A full charge provides up to 45 minutes of cordless shaving time depending on your beard growth.
• Shave without the cord. With normal use the shaver will be charged
automatically after every cleaning in the Clean&Renew (see
«C Clean&Renew»).
• Maximum battery capacity will only be reached after several charging/
discharging cycles.
• 5-minute quick charge (with the special cord set (10)) is sufficient for a
shave.
• If the rechargeable batteries are discharged, you may also shave by
connecting the shaver to an electrical outlet via the special cord set.
Charging lights (5)
The green charging lights show the charge status of the batteries. The green
charging light blinks when the shaver is being charged or switched on.
When the battery is fully charged, all green charging lights shine permanently,
provided the shaver is connected to an electrical outlet.
Low-charge light (6)
The red low-charge light flashes when the battery is running low.
You should be able to finish your shave.
A Shaving
Press the on/off switch (4) to operate the shaver (picture A).
The flexible shaving foils automatically adjust to every contour of your face
(picture A).
Long hair trimmer (2)
To trim sideburns, moustache or beard, slide the long hair trimmer upwards.
Precision setting switch (« ») (3) (390cc/370cc only)
For precise handling in hard to shave areas (e.g. under the nose) slide the
switch (3) to the right to position « ». The centre trimmer and one foil will be
lowered.
Tips for the perfect shave
For best results, Braun recommends you follow 3 simple steps:
1. Always shave before washing your face.
2. At all times, hold the shaver at right angles (90°) to your skin.
3. Stretch your skin and shave against the direction of your beard growth.
25
98756809_390cc-4_Japan.indd 25
17.01.11 13:24
B Keeping your shaver in top shape
Cleaning indicator
Your shaver should be cleaned daily in the Clean&Renew, and certainly when
the yellow cleaning light (7) shines constantly after shaving. If this is not
done, the yellow light will go out after some time. The shaver’s electronics
will then assume it has been cleaned manually and a new calculation of the
time when the next cleaning is required will be started. During the cleaning
process in the Clean&Renew the yellow light will flash and will go off after
approx. 4 hours when cleaning is finished.
Automatic cleaning
Once the shaver is put into the Clean&Renew, it is cleaned automatically
(see «C Clean&Renew»).
Manual cleaning is recommended only when the Clean&Renew is not
available, e. g. when travelling.
Manual cleaning
The shaver head is suitable for cleaning under running tap water.
Warning: Detach the shaver from the power supply before cleaning
the shaver head in water.
Regular cleaning ensures better shaving performance. Rinsing the shaver
head under running water after each shave is an easy and fast way to keep
it clean:
• Switch the shaver on (cordless) and rinse the shaver head under hot
running water. You may use liquid soap without abrasive substances.
Rinse off all foam and let the shaver run for a few more seconds.
• Next, switch off the shaver, remove the shaver Foil & Cutter cassette (1)
and let it dry.
• If you regularly clean the shaver under water, then once a week apply
a drop of light machine oil onto the long hair trimmer (2) and shaver
Foil & Cutter cassette (1).
Alternatively, you may clean the shaver using a brush:
• Switch off the shaver. Remove the shaver Foil & Cutter cassette and tap
it out on a flat surface.
• Using a brush, clean the inner area of the shaver head. However, do not
clean the shaver Foil & Cutter cassette with a brush as this may damage
it.
26
98756809_390cc-4_Japan.indd 26
17.01.11 13:24
Replacement light for shaving parts/Reset
To maintain 100% shaving performance, replace the shaver Foil & Cutter
cassette (1), when the replacement light for shaving parts (8) comes on (after
about 18 months) or when worn.
The replacement light will remind you during the next 7 shaves to replace the
foil and cutter cassette. Then the shaver will automatically reset.
After you have replaced the Foil & Cutter cassette (1), press the on/off switch
(4) for at least 5 seconds to reset the counter.
While doing so, the replacement light blinks and goes off when the reset is
complete. The manual reset can be done at any time.
Preserving the batteries
In order to maintain the optimum capacity of the rechargeable batteries, the
shaver has to be fully discharged (by shaving) every 6 months approximately.
Then recharge the shaver to full capacity.
Environmental notice
This product contains rechargeable batteries. In the interest of
protecting the environment, please do not dispose of the product in
the household waste at the end of its useful life. Disposal can take
place at a Braun Service Centre or at appropriate collection sites
provided in your country.
C Clean&Renew
Braun Clean&Renew has been developed for cleaning, charging and storing
your shaver. Clean your shaver daily in the Clean&Renew.
During the automated cleaning process, the shaver is switched on and off
at intervals to obtain best cleaning results. Since the specially formulated
cleaning fluid contains a small amount of oil, the cleaning procedure also
fulfils the lubrication needs of the shaver.
Important
• Only use the power supply cord set supplied with the shaver.
• In order to avoid any leakage of the cleaning fluid, place the appliance on a
flat, stable surface. Do not tip, move suddenly or transport in any way if a
cleaning cartridge is installed.
• Do not place the appliance in a mirror cabinet, nor store it over radiators,
nor place it on polished or lacquered surfaces. Do not expose to direct
sunlight.
27
98756809_390cc-4_Japan.indd 27
17.01.11 13:24
• The appliance contains highly flammable liquid. Keep it away from sources
of ignition. No smoking.
• Keep out of reach of children. Do not refill cartridge. Use only original
Braun refill cartridge.
Description
1
2
3
4
5
Start/release button
Contact bow
Lift button for cartridge exchange
Level indicator
Cleaning cartridge
Before using Clean&Renew
Installing the cartridge
• Press the lift button (3) to open the housing.
• Hold the cartridge down on a flat, stable surface (e.g. table). Carefully
remove the lid from the cartridge. Slide the cartridge into the base as far
as it will go.
• Slowly close the housing by pushing it down until it locks.
Replacing the cartridge
After having pressed the lift button to open the housing, wait for a few
seconds before removing the used cartridge.
Before discarding the used cartridge, make sure to close the openings
using the lid of the new cartridge, since the used cartridge will contain
contaminated cleaning solution.
The used cartridge can be disposed in the household waste.
Operating your Clean&Renew
• Connect your Clean&Renew with the cord set to the mains electricity
supply. The special socket at the back is adjustable to save space. After
each shave, switch the shaver off and put it into the Clean&Renew, upside
down and with the front showing.
• Push the start/release button (1) to lock and connect the shaver. The
cleaning process will start. The yellow light on the shaver will flash during
the complete process (approx. 2 minutes cleaning, min. 4 hours drying).
• Do not interrupt the cleaning process, as it leaves the shaver wet and not
fit for use. If interruption is needed nonetheless, press the start/release
button (1).
28
98756809_390cc-4_Japan.indd 28
17.01.11 13:24
• When cleaning is finished, the yellow light will go off and the shaver is
ready for use. To release it, push the start/release button.
• A cleaning cartridge should be sufficient for about 30 cleaning cycles.
When the level indicator (4) has reached the « » mark, the remaining fluid
in the cartridge is sufficient for about 5 more cleaning cycles. Then the
cartridge should be replaced, when used daily approx. every 4 weeks.
• The hygienic cleaning solution cartridge contains alcohol which, once
opened, will naturally evaporate slowly into the surrounding air. Each
cartridge, if not used daily should be replaced after approx. 8 weeks.
• The cleaning cartridge also contains lubricates, which may leave residual
marks on the shaver head after cleaning. However, these marks can be
removed easily by wiping gently with a cloth or soft tissue paper.
• Clean the housing from time to time with a damp cloth, especially the
opening where the shaver rests.
Accessories
Available at your dealer or Braun Service Centres:
• Foil & Cutter cassette: 32S/32B
• Cleaning cartridge Clean&Renew: CCR
Subject to change without notice.
For electric specifications, see printing on the special cord set.
Please do not dispose of the product in the household waste at the
end of its useful life. Disposal can take place at a Braun Service
Centre or at appropriate collection points provided in your country.
29
98756809_390cc-4_Japan.indd 29
17.01.11 13:24
30
98756809_390cc-4_Japan.indd 30
17.01.11 13:24
31
98756809_390cc-4_Japan.indd 31
17.01.11 13:24
98756809/I-11
98756809_390cc-4_Japan.indd 32
17.01.11 13:24
Download PDF

advertising