Braun 9785 Electric Shaver User Manual

Prosonic
9791 , 9785
washable
rt cleaning
sta
clean
eco
l
norma
ve
intensi
trimmer
high
auto
select
low
A ctivePow
9785
off
er
on
empty
reset
BS 9791 BS 9785
BS 9782
BS 9781
www.braun.co.jp
www.braun.co.jp
5673474_BS9791_Japan.indd 1
09.05.2007 8:25:29 Uhr
2
5673474_BS9791_Japan.indd 2
09.05.2007 8:25:31 Uhr
STOP
3
5673474_BS9791_Japan.indd 3
09.05.2007 8:25:31 Uhr
4
5673474_BS9791_Japan.indd 4
09.05.2007 8:25:32 Uhr
5
5673474_BS9791_Japan.indd 5
09.05.2007 8:25:32 Uhr
6
5673474_BS9791_Japan.indd 6
09.05.2007 8:25:33 Uhr
7
5673474_BS9791_Japan.indd 7
09.05.2007 8:25:33 Uhr
9791, 9785, 9782, 9781
9000
8
Series
9
3
4
10
trimmer
11
s ta
rt cleaning
clean
eco
normal
5
e
intensiv
high
on
low
6
empty
12
off
2
1
ct
auto sele
13
reset
14
7
15
18
16
was
hab
le
17
reset
trim
me
r
8
5673474_BS9791_Japan.indd 8
09.05.2007 8:25:33 Uhr
9
5673474_BS9791_Japan.indd 9
09.05.2007 8:25:34 Uhr
10
5673474_BS9791_Japan.indd 10
09.05.2007 8:25:35 Uhr
9791
9785
9781
9782
11
5673474_BS9791_Japan.indd 11
09.05.2007 8:25:35 Uhr
tr
on
lo
ck
off
reset
2
trimmer
lock
k
loc
1
off
on
lock
release
reset
trimm
er
wash
able
s ta
rt cleaning
clean
eco
norma
intensi
l
ve
high
auto select
low
empty
12
5673474_BS9791_Japan.indd 12
09.05.2007 8:25:36 Uhr
clean
eco
norma
l
intensi
ve
auto sele
ct
cleaning
clean
st
a rt
eco
al
norm
inten
high
auto
sive
selec
t
low
1
empty
2
new
fast clean
cleaning
clean
st
a rt
eco
l
a rt
cleaning
st
norma
clean
ive
intens
high
auto
eco
l
norma
select
intensi
low
high
empty
auto
ve
select
low
empty
fast clean
fast clean
high
high
low
low
high
low
empty
empty
empty
reset
er
trimm
able
wash
s ta
rt cleaning
clean
eco
normal
intensive
high
auto select
low
empty
s ta
rt cleaning
clean
eco
normal
intensive
auto select
13
5673474_BS9791_Japan.indd 13
09.05.2007 8:25:37 Uhr
ble
washa
s ta
rt cleaning
clean
eco
normal
intensive
high
ct
auto sele
low
s ta
rt cleaning
clean
eco
normal
intensive
auto select
14
5673474_BS9791_Japan.indd 14
09.05.2007 8:25:37 Uhr
r
me
trim
on
le
ab
sh
wa
release
er
washable
oil
release
washable
click!
trimmer
release
release
washable
release
release
washable
washable
15
5673474_BS9791_Japan.indd 15
09.05.2007 8:25:38 Uhr
16
5673474_BS9791_Japan.indd 16
09.05.2007 8:25:39 Uhr
17
5673474_BS9791_Japan.indd 17
09.05.2007 8:25:39 Uhr
9000
Series
release
9000
Series
mer
washable
360°Complete
18
5673474_BS9791_Japan.indd 18
09.05.2007 8:25:39 Uhr
9000
Series
9000
Series
360°Complete
19
5673474_BS9791_Japan.indd 19
09.05.2007 8:25:40 Uhr
20
5673474_BS9791_Japan.indd 20
09.05.2007 8:25:41 Uhr
21
5673474_BS9791_Japan.indd 21
09.05.2007 8:25:41 Uhr
Our products are designed to meet the highest
standards of quality, functionality and design.
We hope you enjoy your new Braun Shaver.
STOP
Warning
Your Prosonic shaving system is provided with
a special cord set, which has an integrated
Safety Extra Low Voltage power supply. Do not
exchange or tamper with any part of it, otherwise
there is risk of an electric shock.
To prevent the cleaning fluid from leaking, ensure
that the Clean&Renew station is placed on a flat
surface. When a cleaning cartridge is installed,
do not tip, move suddenly or transport the
station in any way as cleaning fluid might spill
out of the cartridge. Do not place the station
inside a mirror cabinet, nor place it on a polished
or lacquered surface.
The cleaning cartridge contains a highly
flammable liquid so keep it away from sources
of ignition. Do not expose to direct sunlight and
cigarette smoking nor store it over a radiator.
Keep it out of reach of children.
Do not refill the cartridge and use only original
Braun refill cartridges.
Description
Clean&Renew station
1 Cleaning fluid display
2 Lift button for cartridge exchange
3 Station-to-shaver contacts
4 «start cleaning» button
5 Cleaning program diodes
6 Station power socket
7 Cleaning cartridge
Shaver
8 Foil & cutter cassette
9 Cassette release button
0 Shaver head «lock» switch
q Pop-out long hair trimmer
w On/off switch
e Reset button
r Shaver display
t Shaver-to-station contacts
z Shaver power socket
u Travel case
i Special cord set
22
5673474_BS9791_Japan.indd 22
09.05.2007 8:25:42 Uhr
Before shaving
Prior to first use you must connect the shaver to
an electrical outlet using the special cord set i
or alternatively proceed as below.
clean
eco
norm
al
intens
ive
auto sel
ect
Installing the Clean&Renew station
• Using the special cord set i, connect the
station power socket 6 to an electrical outlet.
• Press the lift button 2 to open the housing.
cleaning
clean
st
a rt
eco
norm
al
sive
inten
high
• Hold the cleaning cartridge 7 down on a flat,
stable surface (e.g. table).
auto
ct
sele
low
1
empty
2
new
fast clean
• Carefully remove the lid from the cartridge.
• Slide the cartridge into the base of the station
as far as it will go.
cleaning
st
a rt
clean
eco
al
a rt
cleaning
st
norm
clean
ive
intens
high
auto
selec
eco
t
norm
al
ive
intens
low
high
empty
auto
selec
t
low
empty
• Slowly close the housing by pushing it down
until it locks.
fast clean
fast clean
The The cleaning fluid display 1 will show how
much fluid is in the cartridge:
high
low
low
high
low
empty
empty
empty
er
trimm
Charging and cleaning the shaver
Insert the shaver head down into the cleaning
station. (The contacts t on the back of the
shaver will align with the contacts 3 in the
cleaning station).
high
reset
«high» up to 30 cleaning cycles available
«low»
up to 7 cleaning cycles remaining
«empty» new cartridge required
wash
able
If required, the Clean&Renew station will now
charge the shaver. The hygiene status of the
shaver will also be analyzed and one of the
following cleaning program diodes 5 will light
up:
«clean»
«eco»
«normal»
«intensive»
shaver is clean
short economical cleaning required
normal level of cleaning required
high intensive cleaning required
s ta
rt cleaning
clean
eco
normal
intensi
ve
high
auto select
low
empty
s ta
rt cleaning
clean
eco
normal
intensive
auto select
23
5673474_BS9791_Japan.indd 23
09.05.2007 8:25:42 Uhr
washa
ble
s ta
rt cleaning
clean
eco
normal
intensive
high
auto sele
ct
low
If the station selects one of the required cleaning
programs, it will not start unless you press the
«start cleaning» button 4. For best shaving
results, we recommend cleaning after each
shave.
Whilst cleaning is in progress, the respective
cleaning program diode will blink. Each cleaning
program consists of several cycles, where
cleaning fluid is flushed through the shaver head
and a heat drying process dries the shaver.
Depending on the program selected the total
cleaning time will range from 32 to 43 minutes.
s ta
rt cleaning
clean
eco
normal
The cleaning programs should not be
interrupted. Please note that whilst the shaver is
drying, the shaving head may be hot and wet.
When the program is finished, the blue «clean»
diode will light up. Your shaver is now clean and
ready for use.
intensive
auto select
Stand-by mode
10 minutes after completing the charging or
cleaning session, the Clean&Renew station
switches to the stand-by mode: The diodes of
the Clean&Renew station and the shaver display
turn off.
Shaver display
9791
9785
9781
9782
The shaver display r shows the charge status
of the battery. During charging or when using
the shaver, the respective green charge segment
will blink. When fully charged the green charge
segment(s) will light up continuously, provided
the shaver is switched on or connected to an
electrical outlet.
The red low charge segment flashes when
the battery capacity has dropped below 20%,
provided the shaver is switched on. The
remaining capacity will then be sufficient for
2 to 3 shaves.
Charging information
• A full charge provides up to 50 minutes
of cordless shaving time. This may vary
according to your beard growth.
• The best environmental temperature for
charging is between 5 °C to 35 °C. Do not
expose the shaver to temperatures higher
than 50 °C for extended periods of time.
24
5673474_BS9791_Japan.indd 24
09.05.2007 8:25:43 Uhr
Shaving
on
tr
Press the on/off switch w to operate the shaver:
lo
ck
reset
k
loc
1
2
lock
• To shave hard to reach areas (e.g. under the
nose) slide the shaver head «lock» switch to
the back position to lock the pivoting head at
an angle.
off
• The pivoting shaver head and floating foils
automatically adjust to every contour of your
face.
trimmer
• To trim sideburns, moustache or beard, slide
the pop-out long hair trimmer upwards.
off
on
lock
Tips for the perfect shave
release
For best shaving results, Braun recommends you
follow 3 simple steps:
1. Always shave before washing your face.
2. At all times, hold the shaver at right angles
(90°) to your skin.
3. Stretch your skin and shave against the
direction of your beard growth.
Shaving with the cord
If the shaver has run out of power (discharged),
and you do not have the time to recharge it in the
Clean&Renew station, you may also shave with
the shaver connected to an electrical outlet via
the special cord set.
Cleaning
reset
er
trimm
e
washabl
Automatic cleaning
After each shave, return the shaver to the
Clean&Renew station and proceed as described
above in the section «Before shaving».
All charging and cleaning needs are then
automatically taken care of. With daily use, a
cleaning cartridge should be sufficient for about
30 cleaning cycles.
The hygienic cleaning cartridge contains alcohol,
which once opened will naturally evaporate
slowly into the surrounding air. Each cartridge,
if not used daily, should be replaced after
approximately 8 weeks.
The cleaning cartridge also contains lubricates,
which may leave residual marks on the outer foil
frame after cleaning. However, these marks can
be removed easily by wiping gently with a cloth
or soft tissue paper.
s ta
rt cleaning
clean
eco
norma
l
ive
intens
high
auto select
low
empty
25
5673474_BS9791_Japan.indd 25
09.05.2007 8:25:43 Uhr
Manual cleaning
The shaver head is suitable for cleaning
under running tap water.
Warning: Detach the shaver from the
power supply before cleaning the shaver
head in water.
trim
Rinsing the shaving head under running water
is an alternative way to keep the shaver clean,
especially when travelling.
r
me
wa
sh
ab
le
on
• Switch the shaver on (cordless) w and rinse
the shaver head under hot running water.
You may use liquid soap without abrasive
substances. Rinse off all foam and let the
shaver run for a few more seconds.
release
• Next, switch off the shaver, press the release
button 9 to remove the foil and cutter cassette
8 and let it dry.
er
washable
oil
• If you regularly clean the shaver under water,
apply a drop of the light machine oil, included
with the shaver, onto the shaver foil and
long hair trimmer. This is critical for proper
functioning of the shaver as washing under
water can lead to removal of lubricants from
the shaver’s cutting parts leading to higher
friction in the shaver. This may result in the
battery running out faster than normal. Even
if this happens - indicated by low charge
indicator lighting up earlier, your Braun shaver
will run for at least 5 more minutes enabling
you to complete your current shave.
release
washable
click!
trimmer
release
Alternatively, you may clean the shaver using the
brush provided:
• Switch off the shaver. Remove the foil and
cutter cassette 8 and tap it out on a flat
surface. Using the brush, clean the inner area
of the pivoting head. However, do not clean the
cassette with the brush as this may damage it.
release
washable
release
release
washable
washable
new
old
Cleaning the housing
From time to time clean the housing of the
shaver and the Clean&Renew station with a
damp cloth, especially inside the cleaning
chamber where the shaver rests.
Replacing the cleaning cartridge
After having pressed the lift button 2 to open the
housing, wait for a few seconds before removing
the used cartridge to avoid any dripping.
Before discarding the used cartridge, make sure
to close the openings using the lid of the new
cartridge, since the used cartridge will contain
contaminated cleaning solution.
26
5673474_BS9791_Japan.indd 26
09.05.2007 8:25:43 Uhr
Keeping your shaver in top shape
Replacing the foil and cutter cassette/reset
To maintain 100% shaving performance,
replace the foil and cutter cassette 8, when
the replacement symbol lights up on the shaver
display r (after about 18 months) or when
cassette is worn.
The replacement symbol will remind you during
the next 7 shaves to replace the foil and cutter
cassette. Then the shaver will automatically reset
the display.
After you have replaced the foil and cutter
cassette, use a ball-pen to push the reset button
e for at least 3 seconds to reset the counter.
While doing so, the replacement light blinks and
goes off when the reset is complete. The manual
reset can be done at any time.
9000
9000
Series
Series
release
mer
washable
360°Complete
Accessories
Available at your dealer or Braun Service
Centres:
• Foil & cutter cassette No. 9000
• Cleaning cartridge Clean&Renew CCR
9000
Series
9000
Series
360°Complete
Environmental notice
This product contains rechargeable
batteries. In the interest of protecting the
environment, please do not dispose of the
product in household waste at the end of
its useful life. Disposal can take place at a
Braun Repair Centre or at appropriate
collection points provided in your country.
The cleaning cartridge can be disposed with
regular household waste.
Subject to change without notice.
This product conforms to the European
Directives EMC 89/336/EEC and Low
Voltage 73/23/EEC.
For electric specifications, see printing on the
special cord set.
27
5673474_BS9791_Japan.indd 27
09.05.2007 8:25:44 Uhr
Guarantee
We grant 1 year guarantee on the product
commencing on the date of purchase. Within
the guarantee period we will eliminate, free of
charge, any defects in the appliance resulting
from faults in materials or workmanship, either
by repairing or replacing the complete appliance
as we may choose.
This guarantee extends to every country where
this appliance is supplied by Braun or its
appointed distributor.
This guarantee does not cover: damage due
to improper use, normal wear and tear (e.g. foil
& cutter cassette) as well as defects that have
a negligible effect on the value or operation of
the appliance. The guarantee becomes void if
repairs are undertaken by unauthorised persons
and if original Braun parts are not used.
To obtain service within the guarantee period,
hand in or send the complete appliance with
your sales receipt to an authorised Braun
Customer Service Centre.
For UK only:
This guarantee in no way affects your rights
under statutory law.
28
5673474_BS9791_Japan.indd 28
09.05.2007 8:25:45 Uhr
31
5673474_BS9791_Japan.indd 31
09.05.2007 8:25:45 Uhr
5-673-474/01/V-07
5673474_BS9791_Japan.indd 32
09.05.2007 8:25:46 Uhr