Instruction manual | Bravetti EP586HL Mixer User Manual

TR444 OM REV 899
9/16/04
8:29 AM
Page 11
IMPORTANT NOTICE
®
If any parts are missing or defective,
DO NOT return this product.
Please call our Customer Service Department for assistance.
800-233-9054
Monday - Friday 8am - 5pm CST
Thank You
INSTRUCTION
MANUAL
®
If after reading this instruction
booklet you still have questions about using the
Breadman® Automatic Bread Machine,
please write or call:
Salton, Inc.
550 Business Center Drive
Mt. Prospect, IL 60056
1-800-233-9054
AUTOMATIC BREAD BAKER
Monday - Friday 8am - 5pm CST
For more information on Salton, Inc. products, E-mail us at:
breadman@saltonusa.com
OR, visit our website:
http://www.breadman.com
Printed in China
TR444
© 1999 Salton, Inc.
TR444 OM REV 899
9/16/04
8:29 AM
Page 10
ONE-YEAR LIMITED WARRANTY
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
- 10
This Salton, Inc. product warranty extends to the original consumer purchaser of the product.
Warranty Duration: This product is warranted to the original consumer purchaser for a period
of one (1) year from the original purchase date.
Warranty Coverage: This product is warranted against defective materials or workmanship.
This warranty is void if the product has been damaged by accident, in shipment, unreasonable
use, misuse, neglect, improper service, commercial use, repairs by unauthorized personnel or
other causes not arising out of defects in materials or workmanship. This warranty is effective
only if the product is purchased and operated in the USA, and does not extend to any units
which have been used in violation of written instructions furnished by Salton, Inc., or to units
which have been altered or modified or to damage to products or parts thereof which have had
the serial number removed, altered, defaced or rendered illegible. Wear and tear for Bread
Pans and Paddles is not considered a manufacturer’s defect.
Warranty Disclaimers: This warranty is in lieu of all warranties expressed or implied and no
representative or person is authorized to assume for Salton, Inc. any other liability in
connection with the sale of our products. There shall be no claims for defects or failure of
performance or product failure under any theory of tort, contract or commercial law including,
but not limited to, negligence, gross negligence, strict liability, breach of warranty and breach of
contract.
Warranty Performance: During the above one-year warranty period, a product with a defect
will be either repaired or replaced with a reconditioned comparable model (at Salton, Inc.’s
option) when the product is returned to the Salton, Inc.’s warranty period and an additional
one-month period. No charge will be made for such repair or replacement.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
- 12
Service and Repair
TABLE OF CONTENTS
Important Safeguards
Your Breadman®
Control Panel
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
.........................................................2
............................................................3
Using the Breadman®
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Kneading and Baking Cycles
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
How to Make Bread or Dough
Using the Timer
Cleaning Instructions
-5
-7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Recipe: Rich Country Buttermilk Bread
Deluxe Rapid Recipe: Basic White
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 - 17
Guarantee/Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover
Should the appliance malfunction, you should first call toll-free 1-800-233-9054 between the
hours of 8:00 am and 5:00 pm Central Standard Time and ask for CONSUMER SERVICE stating
that you are a consumer with a problem.
In-Warranty Service: For an appliance covered under the warranty period, no charge is made
for service or postage. Call for pre-paid return mailing label. (U.S. Customers Only)
Out-of Warranty Service: A flat rate charge by model is made for out-of-warranty service.
Include $15.00 for return shipping and handling.
Salton, Inc. cannot assume responsibility for loss or damage during incoming shipment. For
your protection, carefully package the product for shipment and insure it with the carrier. Be
sure to enclose the following items with your appliance: any accessories related to your
problem; your full return address and daytime phone number; a note describing the problem
you experienced; a copy of your sales receipt or other proof of purchase to determine warranty
status. C.O.D. shipments cannot be accepted.
Return the appliance to:
ATTN: Repair Department
Salton, Inc.
550 Business Center Drive
Mt. Prospect, Illinois 60056
For more information on Salton, Inc. products:
visit our website: http://www.breadman.com or E-mail us at breadman@saltonusa.com
TR444 OM REV 899
9/16/04
NOTES
8:29 AM
Page 12
IMPORTANT SAFEGUARDS
When using the Breadman® Automatic
Bread Baker, basic safety precautions
should always be followed, particularly
the following:
11. Do not let the cord hang over the edge
of a table or counter, or touch hot
surfaces. Do not place on an unsteady
or cloth-covered surface.
1. READ ALL INSTRUCTIONS BEFORE USE.
12. Do not place the appliance near a hot
gas or electric burner, in a heated oven,
or in a microwave oven.
2. Do not touch hot surfaces. Use handles
or knobs. Always use oven mitts when
handling hot materials and allow metal
parts to cool before cleaning.
13. Keep the unit at least 2 inches away
from walls or any other objects when
using it.
3. Unplug this product from wall outlet
when not in use and before cleaning.
Allow to cool thoroughly before putting
on or taking off parts.
14. To disconnect, grip the plug and pull
it from the wall outlet. Never pull on
the cord.
4. Do not immerse appliance in water or
any other liquid.
SAVE THESE INSTRUCTIONS
5. Close supervision is always necessary
when this or any appliance is used by
or near children.
Note:
A. A short power-supply cord is provided
to reduce the risk of becoming
entangled in or tripping over a
longer cord.
B. Extension cords are available and may
be used, but special care must be
exercised in use.
C. If an extension cord is used:
(1) the marked electrical rating of the
extension cord should be at least
as great as the electrical rating of
the appliance, and
(2) the cord should be arranged so
that it will not drape over the
counter top or tabletop where it
can be pulled on by children or
tripped over unintentionally.
CAUTION: During use, the internal parts of
the Breadman® and the area around the
Steam Vent are HOT.
Keep out of reach of children to avoid
possible injury.
6. Do not allow anything to rest on the
power cord. Do not plug in cord where
persons may walk or trip on it.
7. Do not operate this or any appliance
with a frayed or damaged cord, or after
the appliance malfunctions, or has
been damaged in any manner. Return
the appliance to Salton, Inc. for
examination and repair.
8. Avoid contact with any moving parts.
9. Do not use attachments not
recommended by Breadman® Products;
they may damage the appliance or
cause injury.
10. This appliance is intended for
household use only. Do not use
outdoors or for commercial purposes.
1
TR444 OM REV 899
9/16/04
8:29 AM
Page 1
YOUR BREADMAN® AUTOMATIC BREAD BAKER
4.
5.
1.
8.
7.
2.
e
hit d
Me W
3.
nch
Fre
le
ho
W heat
W e
lux
De pid
Ra
e
hit
W ht
Lig &
it
Fru Nut
e
hit
W rk
Da 11.
d
ea
h
ug
Do
Kn
e
Ris
ke
lb.
Ba
1
m
lb.
2.0
er
Size
Tim
af
Lo
lb.
op
t
St
Se
6.
ar
W
1.5
lect
Se
t
ar
St
1. Cover
2. Viewing Window
3. Steam Vent
4. Handle
5. Bread Pan
6. Control Panel
7. Drive Shaft
8. Kneading Paddle
9. Power Supply Cord
10. Heating Element
11. Oven Chamber
10.
9.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to fit
into a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in any way.
2
NOTES
TR444 OM REV 899
9/16/04
8:29 AM
Page 2
TROUBLE SHOOTING
(continued)
Symptom
Possible Solutions
The bread didn’t
rise at all
Make sure yeast is not left out. Also check the date code
on the yeast and that it is always the last ingredient put
into the Pan. Make sure the yeast doesn’t come into
contact with salt or any liquid ingredients.
CONTROL PANEL
White
Med
White
Dark
White
Light
Whole
Wheat
Fruit &
Nut
Deluxe
Rapid
French
Dough
Knead
The dough looks
like batter, or the
dough ball is still
sticky, not smooth
and round
During the Kneading process, add 1 tablespoon of flour at a
time, letting it mix in well. For most breads, your dough ball
should become round, smooth, not sticky to the touch, and
should bounce back when you press it with your finger.
The dough ball is
lumpy or too dry
During the Kneading process, add 1 tablespoon of water at a
time, letting it mix in well.
B. Select
Each time this button is pressed, the
indicator light inside the Display Window
moves to the next selection.
The bread caved in
Make sure liquids are measured correctly. Next time,
reduce your liquids by 2 tablespoons. If you’re using fruits
or vegetables, make sure they are well drained.
:END: displays
The Baking Cycle is completed.
Select from the following choices:
White Med. (Medium crust color)
White Dark
White Light
Whole Wheat
Fruit & Nut
Deluxe Rapid
French
Dough
C. Timer Set
Use this button to add time displayed in
the Display Window.
Each time you press the TIMER SET
Button, the Timer advances 10 minutes.
(Hint: Hold down the TIMER SET
Button to fast forward the Timer.)
1 lb.
Rise
1.5 lb. 2.0 lb.
Timer Set
Warm
Loaf Size
Select
Stop
Start
D. Start
Press this button to start the Baking
Cycle you choose, or to start the Timer.
A. Display Window
Shows your selection and Timer setting.
18
Bake
E. Stop
Press this button to stop the machine.
F. Capacity/Loaf Size
Press the CAPACITY/LOAF SIZE
Button to select what size loaf you
would like to bake. You can choose
from 1.0, 1.5 or 2 lb. loaves depending
on your recipe. Your choice will
illuminate on the Control Panel.
*Note: When the SELECT,
TIMER SET, START, STOP and
CAPACITY/LOAF SIZE Buttons
are pressed, you will hear a beep.
This indicates that you have
completed the selection.
3
TR444 OM REV 899
9/16/04
8:29 AM
Page 3
USING THE BREADMAN® AUTOMATIC BREAD BAKER
Before using the Breadman® for the first time, carefully read all
of the instructions included in this manual.
With your new Breadman® :
• You can use commonly available pre-packaged bread mixes.
Follow the instructions on the package.
• You can bake a loaf of bread from scratch. See the
Recipe and Menu Planner included with your Breadman®
for lots of tasty options.
• You can make dough for rolls or shaped loaves you'll bake in
your own oven.
Use the Breadman®’s Dough Cycle to do the mixing and
kneading for you , then shape, proof, and bake the bread
yourself in a conventional oven.
Inserting and
Removing the
Bread Pan
TROUBLE SHOOTING
Symptom
Possible Solutions
The Bread Machine
does not bake
the bread
The Dough program was selected. To bake the bread, choose
the appropriate program for baking bread.
Bread has an
offensive odor
Check to be sure you added the correct amount of yeast.
Measure carefully — too much yeast will cause an unpleasant
odor and may cause the loaf to rise too high.
Be sure to use only fresh ingredients.
Baked bread is soggy
or the bread’s surface
is sticky
Remove the bread from the Bread Pan as soon as it is
done baking. Leaving it in the Pan allows condensation
to collect on the sides touching the Pan.
Also be sure to cool the loaf on a wire rack; cooling it on
a countertop causes the side next to the counter to
become soggy.
The Kneading
Paddle was stuck
in the bread
Make sure the Kneading Paddle is mounted properly before
adding ingredients to the Bread Pan and baking.
Sometimes denser or crustier loaves of bread may pull the
Kneading Paddle out with them when you remove the loaves
after baking. When this happens, use a non-metal utensil and
gently remove the blade from the bottom of the loaf.
The bread rose
too high
Make sure not to add too much yeast, water or flour. Too
much of any of these may cause the loaf to rise more than
it should.
The bread didn’t
rise enough
Did you add enough yeast, water or sweetener?
• To insert the Bread Pan into the Oven Chamber, seat it in
place and press down until it locks into place.
* Remember to attach your Kneading Paddle FIRST, then add
the ingredients.
• To remove the Bread Pan: Gently but firmly grab the
Handle and pull straight up out of the Oven Chamber.
AFTER BAKING MAKE SURE YOU ALWAYS WEAR
OVEN MITTS TO AVOID BEING BURNED.
Operating Tips
• Use oven mitts when working with bread or any part of the
Breadman® that is hot from baking.
(continued)
• Wipe off crumbs and clean as needed, after baking.
• Unplug the Breadman® when you are not using it.
• It is normal for the viewing window to collect moisture
during the Rise Cycle. As your bread bakes, the moisture soon
will evaporate so you can watch your bread's baking progress.
• Don't open the Lid during Kneading or Baking. This causes
the bread to bake improperly.
• Don't unplug the Breadman® during Kneading or Baking.
This will stop the operation and you will have to start all
over again, with new ingredients.
4
Make sure to add ingredients in the proper order: liquids,
dry ingredients, yeast. Make sure yeast doesn’t get wet
until the Breadman® mixes the ingredients together.
Note: Typically, bread made with whole grain flours
will not rise as high as bread made with refined flours.
Make sure you are using bread flour.
17
TR444 OM REV 899
9/16/04
8:29 AM
Page 4
TROUBLE SHOOTING
USING THE BREADMAN®
Symptom
Possible Solutions
Display Window
shows nothing
Make sure the machine is plugged in. If nothing appears in
the Display Window, unplug and plug in again.
START button
doesn’t start
the machine
Can’t set the Timer
Make sure the machine is plugged in.
If nothing appears in the Display Window, press
SELECT to choose your Baking Cycle. (You must select
a Baking Cycle before pressing START.)
If the baking area is too hot, the Breadman® will not start
because of an automatic safety feature. Remove the Bread
Pan with your ingredients, and wait until the Breadman®
cools down — about 20 minutes — before starting a
new loaf.
If you selected either the Rapid Bake or Dough Cycle,
you should not use the Timer. This is because the
ingredients should be processed immediately for
these cycles.
After starting, the
Display Window
flashes “H:E3”
If the Bread Machine is too hot, it will not start because
of an automatic safety feature.
Remove the Pan and let the Bread Machine cool down
until “H:E3” disappears and the selection reappears.
You may then start the cycle.
The Bread Machine
doesn’t mix the
ingredients
On preheating the (:) in the Time Display flashes and the
Kneading Paddle will not move. There is a 4 - 5 min. rest
period on some of the cycles in which there will be no
movement in the Pan for 4 - 5 min. If the Kneading
Paddle does not operate after this period of time,
check to see if the Kneading Paddle is engaged in the
machine correctly.
The Breadman® stops
This happens if you press the STOP Button, if you
unplug the machine, or if there is a power outage. In each
case, the Breadman® can't be restarted for this Cycle.
Discard the contents of the Bread Pan and start again
with new ingredients.
16
Caution
(continued)
• To protect young children, keep the Breadman® out of their
reach when there is no supervision; especially during the
Kneading and Baking Cycles.
• Use the Breadman® on a flat, hard surface. Do not place it
near a flame or heat, or on a soft surface (such as a carpet).
Avoid placing it where it may tip over during use.
Dropping the Breadman® could cause it to malfunction.
• To avoid burns, stay clear of the Steam Vent during
Kneading and Baking Cycles. The Viewing Window can
get quite hot as well.
• After baking, wait for the Breadman® to cool down
before touching or cleaning the Bread Pan or internals
of the machine.
• Never use metal utensils with the Breadman®. These can
scratch the non-stick surface of the Bread Pan.
• Avoid electric shock by unplugging the Breadman® before
using a damp cloth or sponge to wipe down the interior of
the Oven.
• Never use the Bread Pan on a gas or electric cooktop or on
an open flame.
• Avoid covering the Steam Vent during Kneading or
Baking Cycles. This could cause the Breadman® to warp
or discolor.
5
TR444 OM REV 899
9/16/04
8:29 AM
Page 5
KNEADING AND BAKING CYCLES
DELUXE RAPID BREAD RECIPE
The Breadman® Automatic Bread Baker has several Baking Cycles from which
you can choose:
IMPORTANT
Weather conditions such as temperature, altitude or accuracy in
measuring can effect the outcome of a loaf.
We recommend that you use warm water (115˚F - 120˚F/45˚C - 50˚C) for
best results on the Deluxe Rapid Cycle. We also recommend using a
Quick Rise or Rapid Rise Yeast. This yeast will speed the rising action.
• The White: Light, Medium and Dark Cycles let you choose your favorite type of crust.
• The Fruit & Nut Cycle is for breads such as apple-walnut or raisin bread with higher sugar content.
• The Whole Wheat Cycle is designed specifically for breads that contain whole wheat flour.
• The French Cycle is designed for crispy French or European breads.
The following table shows how long each part of every Cycle takes.
Basic White
White Light
White Medium
White Dark
Baking
Phase
1.0 lb.
Whole Wheat
1.5 lb. 2.0 lb.
1.0 lb.
1.5 lb.
Timer Set
Fruit & Nut
2.0 lb.
1.0 lb.
1.5 lb.
French
2.0 lb.
1.0 lb.
1.5 lb.
2.0 lb.
4:00 - 13:00
Warm Water
1-1/2 lbs.
2 lbs.
1 cup + 2 Tbl.
1-1/4 cup + 2 Tbl.
Knead 1
10 min.
15 min. 15 min.
12 min. 15 min. 15 min. 10 min. 15 min. 15 min. 12 min. 15 min. 15 min.
Rest
28 min.
30 min. 32 min.
23 min. 30 min. 30 min. 35 min. 33 min. 32 min. 33 min. 33 min. 32 min.
Oil
4 tsp.
2 Tbl.
Knead 2*
12 min.
20 min. 20 min.
15 min. 15 min. 20 min. 15 min. 22 min. 25 min. 15 min. 22 min. 20 min.
Sugar
1 Tbl.
1-1/2 Tbl.
Rise
20 min.
20 min. 23 min.
30 min. 25 min. 25 min. 25 min. 20 min. 23 min. 35 min. 25 min. 28 min.
Punch Down 5 sec.
5 sec.
5 sec.
1-1/2 tsp.
1-1/2 tsp.
Final Rise
60 min.
60 min. 60 min.
70 min. 70 min. 70 min. 60 min. 60 min. 60 min. 70 min. 70 min. 70 min.
1 Tbl. + 2 tsp.
2 Tbl.
Bake
50 min.
55 min. 60 min.
50 min. 55 min. 60 min. 55 min. 60 min. 65 min. 55 min. 65 min. 75 min
3 cups
4 cups
1 Tbl. + 1 tsp.
2 Tbl. + 1 tsp.
5 sec.
5 sec.
5 sec.
5 sec.
5 sec.
5 sec.
5 sec.
5 sec.
5 sec.
Total Time
3:00
3:20
3:30
3:20
3:30
3:40
3:20
3:40
3:40
3:40
3:50
4:00
Keep Warm
180
180
180
180
180
180
180
180
180
180
180
180
© Copyright 1999, Breadman
Salt
Dry Milk
Bread Flour
Rapid Rise Yeast
®
*Fruit & Nut Add-In Beeper. This signal will occur at the end of the second Kneading Cycle in the
White: Light, Medium and Dark, Fruit & Nut Cycles, as well as the Whole Wheat and French Cycles.
Note: If bread is not removed immediately after baking and the Stop button is not pressed, a controlled
3-hour Keep Warm function will begin for each selection (except Dough). This will help reduce condensation between
loaf and Bread Pan, it is best to remove bread as soon as possible after completion of the baking phase.
6
15
TR444 OM REV 899
9/16/04
8:29 AM
Page 6
RECIPE
KNEADING AND BAKING CYCLES
Rich Country Buttermilk Bread
1 lb.
Non Fat Buttermilk
Deluxe Rapid
1-1/2 lbs.
2 lbs.
3/4 cup
1 cup + 2 Tbl.
1-1/2 cups
Unbleached Bread Flour
2-1/2 cups
3-1/4 cups
4-1/4 cups
Sea Salt
1-1/2 tsp.
2 tsp.
Butter or Canola Oil
2 Tbl.
3 Tbl.
Honey
3 Tbl.
1/4 cup
1/4 tsp.
1/2 tsp.
1-1/4 tsp.
1-1/2 tsp.
1 tsp.
2 Tbl.
Baking Soda1/4 tsp.
Active Dry Yeast
1/4 cup
1-3/4 tsp.
Dough
Baking
Phase
Knead 1
1.0 lb.
1.5 lb. 2.0 lb.
1.0 lb.
1.5 lb.
15 min.
15 min. 15 min.
10 min. 15 min. 17 min.
Rest
—
—
—.
30 min. 30 min. 30 min.
Knead 2*
—
—
—
10 min. 15 min. 18 min.
Rise
—
—
—
20 min. 20 min. 20 min.
Punch Down
—
—
—
5 sec.
5 sec.
5 sec.
Final Rise
16 min.
16 min. 16 min.
—
—
—
Bake
28 min.
28 min. 28 min.
—
—
—
Total Time
0:59
0:59
0:59
1:10
1:20
1:25
Keep Warm
180
180
180
—
—
—
© Copyright 1999, Breadman ®
To prepare Rich Country Buttermilk Bread:
• Always use fresh ingredients.
• Always put liquids in the Bread Pan first, yeast last.
• Always allow the bread to cool thoroughly prior to slicing.
Beginning with the buttermilk, add the ingredients to the Pan
in the order listed. Following the operating instructions in this book,
then select the size of loaf and press START.
Deluxe Rapid Version:
• Substitute Active Dry Yeast with Rapid Rise or Quick Rise Yeast and use
the following measurements:
Rapid Rise Yeast
1 lb.
1-1/2 lbs.
2 lbs.
2-1/2 tsp.
1 Tbl.
1 Tbl. + 1/2 tsp.
14
2.0 lb.
7
(continued)
TR444 OM REV 899
9/16/04
8:29 AM
Page 7
HOW TO MAKE BREAD OR DOUGH
CLEANING INSTRUCTIONS
Always use the freshest ingredients available. By carefully following the simple recipes
that come with the Breadman®, you will be able to bake delicious bread every time.
The Bread Pan and Kneading Paddle have non-stick surfaces
that make cleaning easy.
1. After baking each loaf of bread, unplug the Breadman®
and discard any crumbs.
STEP 4
STEP 1
Open the Lid and remove the
Bread Pan.
Gently but firmly lift the Bread Pan
straight out of the Oven Chamber.
STEP 2
Position the Kneading Paddle on the
Drive Shaft as shown.
2. Remove the Bread Pan from the Oven and the Kneading
Paddle from the Bread Pan. Then, as needed, wash the
Bread Pan and Kneading Paddle inside and out with warm,
soapy water. Avoid scratching the non-stick surfaces.
DO NOT PUT THE PAN IN A DISHWASHER.
Make a small indentation on top of the
dry ingredients (not so deep it reaches
the wet layer) and add the yeast to
the indentation.
If the Kneading Paddle is stuck to the Drive Shaft, pour
warm water in the Pan to loosen it.
DO NOT USE EXCESSIVE FORCE.
This order of adding ingredients is
important, especially when using the
Timer, because it keeps the yeast away
from the liquid ingredients until it’s time
to knead them together. (Liquid
ingredients will activate the yeast.)
Match the flat side of the Drive Shaft to
the flat part of the hole in the Kneading
Paddle. Make sure the Paddle is secure.
3. Wipe the inside of the Lid and Oven with a damp cloth or
sponge. If any residue has scorched on the Heating Plate or
elsewhere, wipe with a non-abrasive scrubbing pad and
wipe clean.
Do not use vinegar, bleach, or harsh chemicals to clean
the Breadman®.
STEP 5
Do not soak the Bread Pan for a long period of time — this
could interfere with the free working of the Drive Shaft.
Insert the Bread Pan into the
Oven Chamber.
STEP 3
Place the ingredients into the
Bread Pan.
For best results, add all liquid ingredients
first. Then, add all dry ingredients
EXCEPT yeast.
ALWAYS ADD YEAST LAST.
Note: If your recipe contains salt,
please add salt with liquid ingredients,
keeping it away from the yeast.
Be sure the machine is completely cooled before storing.
Seat the Pan into place and gently but
firmly press straight down until it locks
into place.
The inner casing contains the heating element and drive base.
Therefore, when cleaning, NEVER pour water, solvents or
cleaning solutions into this area.
Close the Lid and plug in the
Breadman®.
When you plug it in, the Breadman®
flashes 18:88 in the Display Window for
three seconds after which the indicator
light (0) will be positioned for
White Medium.
Caution
To avoid electric shock, unplug the Breadman®
before cleaning!
A note on using the Deluxe Rapid
Cycle: You must use Rapid Rise or
Quick Rise Yeast.
8
13
TR444 OM REV 899
9/16/04
8:29 AM
Page 8
USING THE TIMER
For Best Results
(continued)
• Take care to measure ingredients accurately, using a good
set of measuring cups and spoons, or a good scale. Make
sure to level all dry ingredients as you measure them.
Inaccurate measuring could cause unexpected results in
your loaf of bread.
• In particular, be precise in measuring the water.
• Use fresh ingredients.
• Since moisture is an enemy to flour, be sure to store
your flour in an airtight container.
• To keep your yeast active, store it in an airtight
container in your refrigerator.
• Speaking of fresh — when using the Timer, we recommend
setting it for as short a time as possible. Because ingredients
are partially combined in the Bread Pan, the dough may
tend to deteriorate if left too many hours, especially on a
warm or humid day.
• Keep the Lid closed during the Baking Cycle. Opening it
causes uneven baking.
• After your bread has cooled completely, store it in a brown
paper bag.
STEP 6
STEP 8
Press the SELECT Button to choose the
Cycle you want.
Press START to begin your
chosen Cycle.
As you press SELECT, the Indicator
Light in the Display Window will move to
indicate all of the Cycle options. It will
move in this order:
First, the Breadman® will mix the
ingredients. Then it begins the Kneading
Process. During this process, the yeast
begins to activate. The Breadman® will
go through two Kneading Cycles with a
rest period in between. After this process
the bread dough will rise before baking.
White Medium
White Dark
White Light
Whole Wheat
Fruit & Nut
Deluxe Rapid
French
Dough
If the SELECT Button is not pressed, and
START is activated, the Breadman® will
automatically bake a White Medium loaf.
If you plan on making bread with dried
fruit or nuts in it, add these ingredients
when the Breadman® beeps several times
after the second Kneading Cycle. This
will occur in all Cycles except for the
Dough Cycle.
When baking bread , the machine will
beep at the end of the Baking Cycle. If
the bread is not taken out of the machine
immediately, a 3-hour Keep Warm
Function will begin*. However, for best
results it is best to remove the finished
loaf right away. Use oven mitts to
carefully remove the Baking Pan.
STEP 7
Press the CAPACITY/LOAF SIZE
Button to select which size loaf you
would like to bake.
Every time this button is pressed the
indicator light will move to a different
setting. The selections are:
*Note: The Keep Warm Function will
not begin for the Dough Cycle.
1.5 lb.
2.0 lb.
1.0 lb.
If you forget to choose and activate
the loaf size, this Breadman® will
automatically bake a 1.5 lb. loaf.
12
9
TR444 OM REV 899
9/16/04
8:29 AM
Page 9
STEP 9
When your bread is done, the
Breadman® will beep. This indicates that
the Baking phase is completed. Press the
STOP Button, then put on your oven
mitts and remove the Bread Pan.
STEP 10
USING THE TIMER
Remove the loaf from the Bread Pan.
Turn over the Bread Pan a few inches
from the countertop and gently shake out
the loaf. It’s best to remove the loaf as
soon as the machine is done baking.
You can preset your Breadman® to cook bread from 4 hours to
13 hours in advance.
Remember that the Bread Pan and your
loaf are both very hot! Be careful not to
place either on a tablecloth, plastic
surface, or other surface that might
scorch or melt.
Place the loaf on a wire rack or other
ventilated cooling surface to cool. Bread
should be cooled slightly (30 minutes)
before it is sliced.
Note: Do not use the Delay Timer if your recipe includes
eggs, fresh milk or other ingredients that may spoil.
For all Cycles except Dough:
If necessary, remove the Kneading
Paddle from the loaf.
1. Add your ingredients as usual , taking care not to let the
yeast and liquid ingredients contact one another.
2. Close the Breadman® Lid and plug it in.
3. Press the SELECT Button for the Baking Cycle you
prefer as well as the CAPACITY/LOAF SIZE Button for
the size loaf you wish to bake.
4. Press the TIMER SET Button once for each 10 minutes
you want to add.
The amount of time set is shown in the Display Window.
Note: To fast forward time, continually press the
TIMER SET Button.
For example, if it is 8:00 PM and you want a loaf of bread
ready at 7:00 AM, that is 11 hours from now, press the
TIMER SET Button until 11:00 appears on the Display.
5. Press START Button to begin the Timer. The colon (: ) in
the Display Window begins to flash, letting you know the
Timer is started.
6. If you make an error after you have activated the
Timer and want to start over, press STOP and you can
begin again.
If the bread is not removed immediately
after baking and if the STOP Button is
not pressed, a controlled Keep Warm
Cycle will begin and the machine will
automatically shut off after 3 hours.
While this will help prevent the bread
from becoming soggy, for best results,
remove bread immediately after the
Baking Cycle is complete.
Sometimes the Kneading Paddle will stick
in a loaf of bread. If it does, use a nonmetal utensil to gently remove it, taking
care not to scratch the Kneading Paddle.
When you are done using the Breadman,®
be sure to unplug it.
10
To preset your Breadman,® follow these steps:
11
TR444 OM REV 899
9/16/04
8:29 AM
Page 9
STEP 9
When your bread is done, the
Breadman® will beep. This indicates that
the Baking phase is completed. Press the
STOP Button, then put on your oven
mitts and remove the Bread Pan.
STEP 10
USING THE TIMER
Remove the loaf from the Bread Pan.
Turn over the Bread Pan a few inches
from the countertop and gently shake out
the loaf. It’s best to remove the loaf as
soon as the machine is done baking.
You can preset your Breadman® to cook bread from 4 hours to
13 hours in advance.
Remember that the Bread Pan and your
loaf are both very hot! Be careful not to
place either on a tablecloth, plastic
surface, or other surface that might
scorch or melt.
Place the loaf on a wire rack or other
ventilated cooling surface to cool. Bread
should be cooled slightly (30 minutes)
before it is sliced.
Note: Do not use the Delay Timer if your recipe includes
eggs, fresh milk or other ingredients that may spoil.
For all Cycles except Dough:
If necessary, remove the Kneading
Paddle from the loaf.
1. Add your ingredients as usual , taking care not to let the
yeast and liquid ingredients contact one another.
2. Close the Breadman® Lid and plug it in.
3. Press the SELECT Button for the Baking Cycle you
prefer as well as the CAPACITY/LOAF SIZE Button for
the size loaf you wish to bake.
4. Press the TIMER SET Button once for each 10 minutes
you want to add.
The amount of time set is shown in the Display Window.
Note: To fast forward time, continually press the
TIMER SET Button.
For example, if it is 8:00 PM and you want a loaf of bread
ready at 7:00 AM, that is 11 hours from now, press the
TIMER SET Button until 11:00 appears on the Display.
5. Press START Button to begin the Timer. The colon (: ) in
the Display Window begins to flash, letting you know the
Timer is started.
6. If you make an error after you have activated the
Timer and want to start over, press STOP and you can
begin again.
If the bread is not removed immediately
after baking and if the STOP Button is
not pressed, a controlled Keep Warm
Cycle will begin and the machine will
automatically shut off after 3 hours.
While this will help prevent the bread
from becoming soggy, for best results,
remove bread immediately after the
Baking Cycle is complete.
Sometimes the Kneading Paddle will stick
in a loaf of bread. If it does, use a nonmetal utensil to gently remove it, taking
care not to scratch the Kneading Paddle.
When you are done using the Breadman,®
be sure to unplug it.
10
To preset your Breadman,® follow these steps:
11
TR444 OM REV 899
9/16/04
8:29 AM
Page 8
USING THE TIMER
For Best Results
(continued)
• Take care to measure ingredients accurately, using a good
set of measuring cups and spoons, or a good scale. Make
sure to level all dry ingredients as you measure them.
Inaccurate measuring could cause unexpected results in
your loaf of bread.
• In particular, be precise in measuring the water.
• Use fresh ingredients.
• Since moisture is an enemy to flour, be sure to store
your flour in an airtight container.
• To keep your yeast active, store it in an airtight
container in your refrigerator.
• Speaking of fresh — when using the Timer, we recommend
setting it for as short a time as possible. Because ingredients
are partially combined in the Bread Pan, the dough may
tend to deteriorate if left too many hours, especially on a
warm or humid day.
• Keep the Lid closed during the Baking Cycle. Opening it
causes uneven baking.
• After your bread has cooled completely, store it in a brown
paper bag.
STEP 6
STEP 8
Press the SELECT Button to choose the
Cycle you want.
Press START to begin your
chosen Cycle.
As you press SELECT, the Indicator
Light in the Display Window will move to
indicate all of the Cycle options. It will
move in this order:
First, the Breadman® will mix the
ingredients. Then it begins the Kneading
Process. During this process, the yeast
begins to activate. The Breadman® will
go through two Kneading Cycles with a
rest period in between. After this process
the bread dough will rise before baking.
White Medium
White Dark
White Light
Whole Wheat
Fruit & Nut
Deluxe Rapid
French
Dough
If the SELECT Button is not pressed, and
START is activated, the Breadman® will
automatically bake a White Medium loaf.
If you plan on making bread with dried
fruit or nuts in it, add these ingredients
when the Breadman® beeps several times
after the second Kneading Cycle. This
will occur in all Cycles except for the
Dough Cycle.
When baking bread , the machine will
beep at the end of the Baking Cycle. If
the bread is not taken out of the machine
immediately, a 3-hour Keep Warm
Function will begin*. However, for best
results it is best to remove the finished
loaf right away. Use oven mitts to
carefully remove the Baking Pan.
STEP 7
Press the CAPACITY/LOAF SIZE
Button to select which size loaf you
would like to bake.
Every time this button is pressed the
indicator light will move to a different
setting. The selections are:
*Note: The Keep Warm Function will
not begin for the Dough Cycle.
1.5 lb.
2.0 lb.
1.0 lb.
If you forget to choose and activate
the loaf size, this Breadman® will
automatically bake a 1.5 lb. loaf.
12
9
TR444 OM REV 899
9/16/04
8:29 AM
Page 7
HOW TO MAKE BREAD OR DOUGH
CLEANING INSTRUCTIONS
Always use the freshest ingredients available. By carefully following the simple recipes
that come with the Breadman®, you will be able to bake delicious bread every time.
The Bread Pan and Kneading Paddle have non-stick surfaces
that make cleaning easy.
1. After baking each loaf of bread, unplug the Breadman®
and discard any crumbs.
STEP 4
STEP 1
Open the Lid and remove the
Bread Pan.
Gently but firmly lift the Bread Pan
straight out of the Oven Chamber.
STEP 2
Position the Kneading Paddle on the
Drive Shaft as shown.
2. Remove the Bread Pan from the Oven and the Kneading
Paddle from the Bread Pan. Then, as needed, wash the
Bread Pan and Kneading Paddle inside and out with warm,
soapy water. Avoid scratching the non-stick surfaces.
DO NOT PUT THE PAN IN A DISHWASHER.
Make a small indentation on top of the
dry ingredients (not so deep it reaches
the wet layer) and add the yeast to
the indentation.
If the Kneading Paddle is stuck to the Drive Shaft, pour
warm water in the Pan to loosen it.
DO NOT USE EXCESSIVE FORCE.
This order of adding ingredients is
important, especially when using the
Timer, because it keeps the yeast away
from the liquid ingredients until it’s time
to knead them together. (Liquid
ingredients will activate the yeast.)
Match the flat side of the Drive Shaft to
the flat part of the hole in the Kneading
Paddle. Make sure the Paddle is secure.
3. Wipe the inside of the Lid and Oven with a damp cloth or
sponge. If any residue has scorched on the Heating Plate or
elsewhere, wipe with a non-abrasive scrubbing pad and
wipe clean.
Do not use vinegar, bleach, or harsh chemicals to clean
the Breadman®.
STEP 5
Do not soak the Bread Pan for a long period of time — this
could interfere with the free working of the Drive Shaft.
Insert the Bread Pan into the
Oven Chamber.
STEP 3
Place the ingredients into the
Bread Pan.
For best results, add all liquid ingredients
first. Then, add all dry ingredients
EXCEPT yeast.
ALWAYS ADD YEAST LAST.
Note: If your recipe contains salt,
please add salt with liquid ingredients,
keeping it away from the yeast.
Be sure the machine is completely cooled before storing.
Seat the Pan into place and gently but
firmly press straight down until it locks
into place.
The inner casing contains the heating element and drive base.
Therefore, when cleaning, NEVER pour water, solvents or
cleaning solutions into this area.
Close the Lid and plug in the
Breadman®.
When you plug it in, the Breadman®
flashes 18:88 in the Display Window for
three seconds after which the indicator
light (0) will be positioned for
White Medium.
Caution
To avoid electric shock, unplug the Breadman®
before cleaning!
A note on using the Deluxe Rapid
Cycle: You must use Rapid Rise or
Quick Rise Yeast.
8
13
TR444 OM REV 899
9/16/04
8:29 AM
Page 6
RECIPE
KNEADING AND BAKING CYCLES
Rich Country Buttermilk Bread
1 lb.
Non Fat Buttermilk
Deluxe Rapid
1-1/2 lbs.
2 lbs.
3/4 cup
1 cup + 2 Tbl.
1-1/2 cups
Unbleached Bread Flour
2-1/2 cups
3-1/4 cups
4-1/4 cups
Sea Salt
1-1/2 tsp.
2 tsp.
Butter or Canola Oil
2 Tbl.
3 Tbl.
Honey
3 Tbl.
1/4 cup
1/4 tsp.
1/2 tsp.
1-1/4 tsp.
1-1/2 tsp.
1 tsp.
2 Tbl.
Baking Soda1/4 tsp.
Active Dry Yeast
1/4 cup
1-3/4 tsp.
Dough
Baking
Phase
Knead 1
1.0 lb.
1.5 lb. 2.0 lb.
1.0 lb.
1.5 lb.
15 min.
15 min. 15 min.
10 min. 15 min. 17 min.
Rest
—
—
—.
30 min. 30 min. 30 min.
Knead 2*
—
—
—
10 min. 15 min. 18 min.
Rise
—
—
—
20 min. 20 min. 20 min.
Punch Down
—
—
—
5 sec.
5 sec.
5 sec.
Final Rise
16 min.
16 min. 16 min.
—
—
—
Bake
28 min.
28 min. 28 min.
—
—
—
Total Time
0:59
0:59
0:59
1:10
1:20
1:25
Keep Warm
180
180
180
—
—
—
© Copyright 1999, Breadman ®
To prepare Rich Country Buttermilk Bread:
• Always use fresh ingredients.
• Always put liquids in the Bread Pan first, yeast last.
• Always allow the bread to cool thoroughly prior to slicing.
Beginning with the buttermilk, add the ingredients to the Pan
in the order listed. Following the operating instructions in this book,
then select the size of loaf and press START.
Deluxe Rapid Version:
• Substitute Active Dry Yeast with Rapid Rise or Quick Rise Yeast and use
the following measurements:
Rapid Rise Yeast
1 lb.
1-1/2 lbs.
2 lbs.
2-1/2 tsp.
1 Tbl.
1 Tbl. + 1/2 tsp.
14
2.0 lb.
7
(continued)
TR444 OM REV 899
9/16/04
8:29 AM
Page 5
KNEADING AND BAKING CYCLES
DELUXE RAPID BREAD RECIPE
The Breadman® Automatic Bread Baker has several Baking Cycles from which
you can choose:
IMPORTANT
Weather conditions such as temperature, altitude or accuracy in
measuring can effect the outcome of a loaf.
We recommend that you use warm water (115˚F - 120˚F/45˚C - 50˚C) for
best results on the Deluxe Rapid Cycle. We also recommend using a
Quick Rise or Rapid Rise Yeast. This yeast will speed the rising action.
• The White: Light, Medium and Dark Cycles let you choose your favorite type of crust.
• The Fruit & Nut Cycle is for breads such as apple-walnut or raisin bread with higher sugar content.
• The Whole Wheat Cycle is designed specifically for breads that contain whole wheat flour.
• The French Cycle is designed for crispy French or European breads.
The following table shows how long each part of every Cycle takes.
Basic White
White Light
White Medium
White Dark
Baking
Phase
1.0 lb.
Whole Wheat
1.5 lb. 2.0 lb.
1.0 lb.
1.5 lb.
Timer Set
Fruit & Nut
2.0 lb.
1.0 lb.
1.5 lb.
French
2.0 lb.
1.0 lb.
1.5 lb.
2.0 lb.
4:00 - 13:00
Warm Water
1-1/2 lbs.
2 lbs.
1 cup + 2 Tbl.
1-1/4 cup + 2 Tbl.
Knead 1
10 min.
15 min. 15 min.
12 min. 15 min. 15 min. 10 min. 15 min. 15 min. 12 min. 15 min. 15 min.
Rest
28 min.
30 min. 32 min.
23 min. 30 min. 30 min. 35 min. 33 min. 32 min. 33 min. 33 min. 32 min.
Oil
4 tsp.
2 Tbl.
Knead 2*
12 min.
20 min. 20 min.
15 min. 15 min. 20 min. 15 min. 22 min. 25 min. 15 min. 22 min. 20 min.
Sugar
1 Tbl.
1-1/2 Tbl.
Rise
20 min.
20 min. 23 min.
30 min. 25 min. 25 min. 25 min. 20 min. 23 min. 35 min. 25 min. 28 min.
Punch Down 5 sec.
5 sec.
5 sec.
1-1/2 tsp.
1-1/2 tsp.
Final Rise
60 min.
60 min. 60 min.
70 min. 70 min. 70 min. 60 min. 60 min. 60 min. 70 min. 70 min. 70 min.
1 Tbl. + 2 tsp.
2 Tbl.
Bake
50 min.
55 min. 60 min.
50 min. 55 min. 60 min. 55 min. 60 min. 65 min. 55 min. 65 min. 75 min
3 cups
4 cups
1 Tbl. + 1 tsp.
2 Tbl. + 1 tsp.
5 sec.
5 sec.
5 sec.
5 sec.
5 sec.
5 sec.
5 sec.
5 sec.
5 sec.
Total Time
3:00
3:20
3:30
3:20
3:30
3:40
3:20
3:40
3:40
3:40
3:50
4:00
Keep Warm
180
180
180
180
180
180
180
180
180
180
180
180
© Copyright 1999, Breadman
Salt
Dry Milk
Bread Flour
Rapid Rise Yeast
®
*Fruit & Nut Add-In Beeper. This signal will occur at the end of the second Kneading Cycle in the
White: Light, Medium and Dark, Fruit & Nut Cycles, as well as the Whole Wheat and French Cycles.
Note: If bread is not removed immediately after baking and the Stop button is not pressed, a controlled
3-hour Keep Warm function will begin for each selection (except Dough). This will help reduce condensation between
loaf and Bread Pan, it is best to remove bread as soon as possible after completion of the baking phase.
6
15
TR444 OM REV 899
9/16/04
8:29 AM
Page 4
TROUBLE SHOOTING
USING THE BREADMAN®
Symptom
Possible Solutions
Display Window
shows nothing
Make sure the machine is plugged in. If nothing appears in
the Display Window, unplug and plug in again.
START button
doesn’t start
the machine
Can’t set the Timer
Make sure the machine is plugged in.
If nothing appears in the Display Window, press
SELECT to choose your Baking Cycle. (You must select
a Baking Cycle before pressing START.)
If the baking area is too hot, the Breadman® will not start
because of an automatic safety feature. Remove the Bread
Pan with your ingredients, and wait until the Breadman®
cools down — about 20 minutes — before starting a
new loaf.
If you selected either the Rapid Bake or Dough Cycle,
you should not use the Timer. This is because the
ingredients should be processed immediately for
these cycles.
After starting, the
Display Window
flashes “H:E3”
If the Bread Machine is too hot, it will not start because
of an automatic safety feature.
Remove the Pan and let the Bread Machine cool down
until “H:E3” disappears and the selection reappears.
You may then start the cycle.
The Bread Machine
doesn’t mix the
ingredients
On preheating the (:) in the Time Display flashes and the
Kneading Paddle will not move. There is a 4 - 5 min. rest
period on some of the cycles in which there will be no
movement in the Pan for 4 - 5 min. If the Kneading
Paddle does not operate after this period of time,
check to see if the Kneading Paddle is engaged in the
machine correctly.
The Breadman® stops
This happens if you press the STOP Button, if you
unplug the machine, or if there is a power outage. In each
case, the Breadman® can't be restarted for this Cycle.
Discard the contents of the Bread Pan and start again
with new ingredients.
16
Caution
(continued)
• To protect young children, keep the Breadman® out of their
reach when there is no supervision; especially during the
Kneading and Baking Cycles.
• Use the Breadman® on a flat, hard surface. Do not place it
near a flame or heat, or on a soft surface (such as a carpet).
Avoid placing it where it may tip over during use.
Dropping the Breadman® could cause it to malfunction.
• To avoid burns, stay clear of the Steam Vent during
Kneading and Baking Cycles. The Viewing Window can
get quite hot as well.
• After baking, wait for the Breadman® to cool down
before touching or cleaning the Bread Pan or internals
of the machine.
• Never use metal utensils with the Breadman®. These can
scratch the non-stick surface of the Bread Pan.
• Avoid electric shock by unplugging the Breadman® before
using a damp cloth or sponge to wipe down the interior of
the Oven.
• Never use the Bread Pan on a gas or electric cooktop or on
an open flame.
• Avoid covering the Steam Vent during Kneading or
Baking Cycles. This could cause the Breadman® to warp
or discolor.
5
TR444 OM REV 899
9/16/04
8:29 AM
Page 3
USING THE BREADMAN® AUTOMATIC BREAD BAKER
Before using the Breadman® for the first time, carefully read all
of the instructions included in this manual.
With your new Breadman® :
• You can use commonly available pre-packaged bread mixes.
Follow the instructions on the package.
• You can bake a loaf of bread from scratch. See the
Recipe and Menu Planner included with your Breadman®
for lots of tasty options.
• You can make dough for rolls or shaped loaves you'll bake in
your own oven.
Use the Breadman®’s Dough Cycle to do the mixing and
kneading for you , then shape, proof, and bake the bread
yourself in a conventional oven.
Inserting and
Removing the
Bread Pan
TROUBLE SHOOTING
Symptom
Possible Solutions
The Bread Machine
does not bake
the bread
The Dough program was selected. To bake the bread, choose
the appropriate program for baking bread.
Bread has an
offensive odor
Check to be sure you added the correct amount of yeast.
Measure carefully — too much yeast will cause an unpleasant
odor and may cause the loaf to rise too high.
Be sure to use only fresh ingredients.
Baked bread is soggy
or the bread’s surface
is sticky
Remove the bread from the Bread Pan as soon as it is
done baking. Leaving it in the Pan allows condensation
to collect on the sides touching the Pan.
Also be sure to cool the loaf on a wire rack; cooling it on
a countertop causes the side next to the counter to
become soggy.
The Kneading
Paddle was stuck
in the bread
Make sure the Kneading Paddle is mounted properly before
adding ingredients to the Bread Pan and baking.
Sometimes denser or crustier loaves of bread may pull the
Kneading Paddle out with them when you remove the loaves
after baking. When this happens, use a non-metal utensil and
gently remove the blade from the bottom of the loaf.
The bread rose
too high
Make sure not to add too much yeast, water or flour. Too
much of any of these may cause the loaf to rise more than
it should.
The bread didn’t
rise enough
Did you add enough yeast, water or sweetener?
• To insert the Bread Pan into the Oven Chamber, seat it in
place and press down until it locks into place.
* Remember to attach your Kneading Paddle FIRST, then add
the ingredients.
• To remove the Bread Pan: Gently but firmly grab the
Handle and pull straight up out of the Oven Chamber.
AFTER BAKING MAKE SURE YOU ALWAYS WEAR
OVEN MITTS TO AVOID BEING BURNED.
Operating Tips
• Use oven mitts when working with bread or any part of the
Breadman® that is hot from baking.
(continued)
• Wipe off crumbs and clean as needed, after baking.
• Unplug the Breadman® when you are not using it.
• It is normal for the viewing window to collect moisture
during the Rise Cycle. As your bread bakes, the moisture soon
will evaporate so you can watch your bread's baking progress.
• Don't open the Lid during Kneading or Baking. This causes
the bread to bake improperly.
• Don't unplug the Breadman® during Kneading or Baking.
This will stop the operation and you will have to start all
over again, with new ingredients.
4
Make sure to add ingredients in the proper order: liquids,
dry ingredients, yeast. Make sure yeast doesn’t get wet
until the Breadman® mixes the ingredients together.
Note: Typically, bread made with whole grain flours
will not rise as high as bread made with refined flours.
Make sure you are using bread flour.
17
TR444 OM REV 899
9/16/04
8:29 AM
Page 2
TROUBLE SHOOTING
(continued)
Symptom
Possible Solutions
The bread didn’t
rise at all
Make sure yeast is not left out. Also check the date code
on the yeast and that it is always the last ingredient put
into the Pan. Make sure the yeast doesn’t come into
contact with salt or any liquid ingredients.
CONTROL PANEL
White
Med
White
Dark
White
Light
Whole
Wheat
Fruit &
Nut
Deluxe
Rapid
French
Dough
Knead
The dough looks
like batter, or the
dough ball is still
sticky, not smooth
and round
During the Kneading process, add 1 tablespoon of flour at a
time, letting it mix in well. For most breads, your dough ball
should become round, smooth, not sticky to the touch, and
should bounce back when you press it with your finger.
The dough ball is
lumpy or too dry
During the Kneading process, add 1 tablespoon of water at a
time, letting it mix in well.
B. Select
Each time this button is pressed, the
indicator light inside the Display Window
moves to the next selection.
The bread caved in
Make sure liquids are measured correctly. Next time,
reduce your liquids by 2 tablespoons. If you’re using fruits
or vegetables, make sure they are well drained.
:END: displays
The Baking Cycle is completed.
Select from the following choices:
White Med. (Medium crust color)
White Dark
White Light
Whole Wheat
Fruit & Nut
Deluxe Rapid
French
Dough
C. Timer Set
Use this button to add time displayed in
the Display Window.
Each time you press the TIMER SET
Button, the Timer advances 10 minutes.
(Hint: Hold down the TIMER SET
Button to fast forward the Timer.)
1 lb.
Rise
1.5 lb. 2.0 lb.
Timer Set
Warm
Loaf Size
Select
Stop
Start
D. Start
Press this button to start the Baking
Cycle you choose, or to start the Timer.
A. Display Window
Shows your selection and Timer setting.
18
Bake
E. Stop
Press this button to stop the machine.
F. Capacity/Loaf Size
Press the CAPACITY/LOAF SIZE
Button to select what size loaf you
would like to bake. You can choose
from 1.0, 1.5 or 2 lb. loaves depending
on your recipe. Your choice will
illuminate on the Control Panel.
*Note: When the SELECT,
TIMER SET, START, STOP and
CAPACITY/LOAF SIZE Buttons
are pressed, you will hear a beep.
This indicates that you have
completed the selection.
3
TR444 OM REV 899
9/16/04
8:29 AM
Page 1
YOUR BREADMAN® AUTOMATIC BREAD BAKER
4.
5.
1.
8.
7.
2.
e
hit d
Me W
3.
nch
Fre
le
ho
W heat
W e
lux
De pid
Ra
e
hit
W ht
Lig &
it
Fru Nut
e
hit
W rk
Da 11.
d
ea
h
ug
Do
Kn
e
Ris
ke
lb.
Ba
1
m
lb.
2.0
er
Size
Tim
af
Lo
lb.
op
t
St
Se
6.
ar
W
1.5
lect
Se
t
ar
St
1. Cover
2. Viewing Window
3. Steam Vent
4. Handle
5. Bread Pan
6. Control Panel
7. Drive Shaft
8. Kneading Paddle
9. Power Supply Cord
10. Heating Element
11. Oven Chamber
10.
9.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to fit
into a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in any way.
2
NOTES
TR444 OM REV 899
9/16/04
NOTES
8:29 AM
Page 12
IMPORTANT SAFEGUARDS
When using the Breadman® Automatic
Bread Baker, basic safety precautions
should always be followed, particularly
the following:
11. Do not let the cord hang over the edge
of a table or counter, or touch hot
surfaces. Do not place on an unsteady
or cloth-covered surface.
1. READ ALL INSTRUCTIONS BEFORE USE.
12. Do not place the appliance near a hot
gas or electric burner, in a heated oven,
or in a microwave oven.
2. Do not touch hot surfaces. Use handles
or knobs. Always use oven mitts when
handling hot materials and allow metal
parts to cool before cleaning.
13. Keep the unit at least 2 inches away
from walls or any other objects when
using it.
3. Unplug this product from wall outlet
when not in use and before cleaning.
Allow to cool thoroughly before putting
on or taking off parts.
14. To disconnect, grip the plug and pull
it from the wall outlet. Never pull on
the cord.
4. Do not immerse appliance in water or
any other liquid.
SAVE THESE INSTRUCTIONS
5. Close supervision is always necessary
when this or any appliance is used by
or near children.
Note:
A. A short power-supply cord is provided
to reduce the risk of becoming
entangled in or tripping over a
longer cord.
B. Extension cords are available and may
be used, but special care must be
exercised in use.
C. If an extension cord is used:
(1) the marked electrical rating of the
extension cord should be at least
as great as the electrical rating of
the appliance, and
(2) the cord should be arranged so
that it will not drape over the
counter top or tabletop where it
can be pulled on by children or
tripped over unintentionally.
CAUTION: During use, the internal parts of
the Breadman® and the area around the
Steam Vent are HOT.
Keep out of reach of children to avoid
possible injury.
6. Do not allow anything to rest on the
power cord. Do not plug in cord where
persons may walk or trip on it.
7. Do not operate this or any appliance
with a frayed or damaged cord, or after
the appliance malfunctions, or has
been damaged in any manner. Return
the appliance to Salton, Inc. for
examination and repair.
8. Avoid contact with any moving parts.
9. Do not use attachments not
recommended by Breadman® Products;
they may damage the appliance or
cause injury.
10. This appliance is intended for
household use only. Do not use
outdoors or for commercial purposes.
1
TR444 OM REV 899
9/16/04
8:29 AM
Page 10
ONE-YEAR LIMITED WARRANTY
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
- 10
This Salton, Inc. product warranty extends to the original consumer purchaser of the product.
Warranty Duration: This product is warranted to the original consumer purchaser for a period
of one (1) year from the original purchase date.
Warranty Coverage: This product is warranted against defective materials or workmanship.
This warranty is void if the product has been damaged by accident, in shipment, unreasonable
use, misuse, neglect, improper service, commercial use, repairs by unauthorized personnel or
other causes not arising out of defects in materials or workmanship. This warranty is effective
only if the product is purchased and operated in the USA, and does not extend to any units
which have been used in violation of written instructions furnished by Salton, Inc., or to units
which have been altered or modified or to damage to products or parts thereof which have had
the serial number removed, altered, defaced or rendered illegible. Wear and tear for Bread
Pans and Paddles is not considered a manufacturer’s defect.
Warranty Disclaimers: This warranty is in lieu of all warranties expressed or implied and no
representative or person is authorized to assume for Salton, Inc. any other liability in
connection with the sale of our products. There shall be no claims for defects or failure of
performance or product failure under any theory of tort, contract or commercial law including,
but not limited to, negligence, gross negligence, strict liability, breach of warranty and breach of
contract.
Warranty Performance: During the above one-year warranty period, a product with a defect
will be either repaired or replaced with a reconditioned comparable model (at Salton, Inc.’s
option) when the product is returned to the Salton, Inc.’s warranty period and an additional
one-month period. No charge will be made for such repair or replacement.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
- 12
Service and Repair
TABLE OF CONTENTS
Important Safeguards
Your Breadman®
Control Panel
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
.........................................................2
............................................................3
Using the Breadman®
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Kneading and Baking Cycles
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
How to Make Bread or Dough
Using the Timer
Cleaning Instructions
-5
-7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Recipe: Rich Country Buttermilk Bread
Deluxe Rapid Recipe: Basic White
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 - 17
Guarantee/Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover
Should the appliance malfunction, you should first call toll-free 1-800-233-9054 between the
hours of 8:00 am and 5:00 pm Central Standard Time and ask for CONSUMER SERVICE stating
that you are a consumer with a problem.
In-Warranty Service: For an appliance covered under the warranty period, no charge is made
for service or postage. Call for pre-paid return mailing label. (U.S. Customers Only)
Out-of Warranty Service: A flat rate charge by model is made for out-of-warranty service.
Include $15.00 for return shipping and handling.
Salton, Inc. cannot assume responsibility for loss or damage during incoming shipment. For
your protection, carefully package the product for shipment and insure it with the carrier. Be
sure to enclose the following items with your appliance: any accessories related to your
problem; your full return address and daytime phone number; a note describing the problem
you experienced; a copy of your sales receipt or other proof of purchase to determine warranty
status. C.O.D. shipments cannot be accepted.
Return the appliance to:
ATTN: Repair Department
Salton, Inc.
550 Business Center Drive
Mt. Prospect, Illinois 60056
For more information on Salton, Inc. products:
visit our website: http://www.breadman.com or E-mail us at breadman@saltonusa.com
TR444 OM REV 899
9/16/04
8:29 AM
Page 11
IMPORTANT NOTICE
®
If any parts are missing or defective,
DO NOT return this product.
Please call our Customer Service Department for assistance.
800-233-9054
Monday - Friday 8am - 5pm CST
Thank You
INSTRUCTION
MANUAL
®
If after reading this instruction
booklet you still have questions about using the
Breadman® Automatic Bread Machine,
please write or call:
Salton, Inc.
550 Business Center Drive
Mt. Prospect, IL 60056
1-800-233-9054
AUTOMATIC BREAD BAKER
Monday - Friday 8am - 5pm CST
For more information on Salton, Inc. products, E-mail us at:
breadman@saltonusa.com
OR, visit our website:
http://www.breadman.com
Printed in China
TR444
© 1999 Salton, Inc.
Download PDF

advertising