Broan 463001 Ventilation Hood User Manual

Broan 463001 Ventilation Hood User Manual
SPECIFICATION SHEET
613004 / 619004
RANGE HOOD
An enduring stainless steel design that combines
the flawless look of Italian style with a lasting
impression.
SPECIFICATIONS
FEATURES
volts
AMPS
120
CFMsones
3.13
•Italian design
•Wall mount
•Finish: 430 Stainless Steel #4 Brushed
•Widths: 30”, 35-7/16” (90cm)
•Telescopic flue accommodates 8’ to 9’ ceilings
•Convertible to ducted or non-ducted operation
•6” round duct connector/backdraft damper
•Halogen lighting (2 x 20 watt, Type JC 12V 20W G4 base,
bulbs included)
•Concealed three-speed slide control
•450 CFM centrifugal blower
•Dishwasher-safe filters feature a quick-release latch and
polished stainless steel cover plate
•Heat Sentry - automatically turns blower to high speed
450
9.0
DUCT
6” round
18"
TM
when excess cooking heat is detected
providing 900 CFM exhaust
30", 3
9-3/8"
•Replacement grease filters available
•Non-ducted filter kit (contains two 6” round filters) (Model
ROUNDFILTER)
•Flue extension for 10’ ceiling (Model RFX6104) (Ducted
only – 31-7/8” long)
•Exterior blower version available in 35-7/16” (90cm) and 48”
widths, providing 600, 900, 1200, or 1500 CFM exhaust
•48” wide integral blower version (614804) available,
2-1/2"
OPTIONS
min 33"
max 48"
22-1/2"
6-5/8" 9-1/4"
5-7/16
"
HVI-2100 certified ratings comply with new
testing technologies and procedures prescribed
by the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers. Product
performance is rated at 0.1 in. static pressure,
based on tests conducted in AMCA’s state-ofthe-art test laboratory. Sones are a measure of
humanly-perceived loudness, based on laboratory
measurements.
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-800-543-8687)
Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
40F
Date
99043361B
613004 / 619004 WIRING
120 VOLT 60 HZ
2-WIRE PLUS
GROUND POWER
SUPPLY
613004 / 619004 MOUNTING
FRAMING BEHIND WOOD
CROSS SUPPORT
WOOD CROSS SUPPORT
– SECURED TO FRAMING AND
LOCATED BEHIND DRYWALL
L
C
L
11 13
DRYWALL
16 "
2
CEILING
HEIGHT
DUCT METHOD
24”
3
16 "
mounting bracket
location
(above 36” high
cooktop)
HOOD distance ABOVE 36” high cooktop (SEE NOTE AT RIGHT)
25”
26”
27”
28”
29”
30”
MOUNTING BRACKET LOCATION ABOVE 36” high COOK TOP
8 FEET
9 FEET
DUCTED OR
NONDUCTED
27”
28”
29”
NONDUCTED
10 FEET
DUCTED WITH
RFX6104 FLUE
EXTENSION
DUCTED
27”
28”
29”
30”
30”
31”
32”
33”
30”
31”
32”
33”
30”
31”
32”
33”
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-800-543-8687)
Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
NOTE: Minimum hood distance above
cooktop must not be less than 24”.
A maximum of 30” above the cooktop is
highly recommended for best capture of
cooking impurities.
Distances over 30” above the cooktop
are at the installer’s and user’s discretion - providing that ceiling height and
flue length permit.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising