Brother 882-D00 Sewing Machine User Manual

Operating Instructions
Portable DVD/CD Player
Model No. DVD-LS90
DVD-LS93
[DVD-LS90]
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please
read these instructions carefully.
Before connecting, operating or adjusting this
product, please read the instructions completely.
Please keep this manual for future reference.
MULTI-FORMAT PLAYBACK
DVD-RAM
recorded with DVD video recorders etc.
Video & Still pictures (JPEG)
DVD-RW (DVD-VR)
recorded and finalized with DVD video recorders etc.
DVD-Video/Video CD/CD
Operations in these instructions are described
mainly with the main unit, but you can do the
operations on the remote control if the remote
controls are the same (➜ Back cover)
sold on the market
Movie, Music etc.
DVD-R/DVD-RW/+R/+RW
recorded and finalized with DVD video recorders etc.
Video (played as DVD-Video)
CD-R/CD-RW
Unless otherwise indicated, illustrations in these
operating instructions are of DVD-LS90.
recorded and finalized with personal computers etc.
Music (WMA/MP3) & Still pictures (JPEG)
See page 5 for details.
For U.S.A.:
The warranty can be found on page 28.
For Canada:
The warranty can be found on page 30.
If you have any questions contact
In the U.S.A.: 1-800-211-PANA(7262)
In Canada: 1-800-561-5505
P
PP
This manual was printed
with soy based ink.
RQT8067-3P
P
WARNING:
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR PRODUCT
DAMAGE, DO NOT EXPOSE THIS
APPARATUS TO RAIN, MOISTURE,
DRIPPING OR SPLASHING AND THAT
NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED
ON THE APPARATUS.
CAUTION!
p DO NOT INSTALL OR PLACE THIS UNIT
IN A BOOKCASE, BUILT-IN CABINET OR
IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF
ELECTRIC SHOCK OR FIRE HAZARD
DUE TO OVERHEATING, ENSURE THAT
CURTAINS AND ANY OTHER MATERIALS
DO NOT OBSTRUCT THE VENTILATION
VENTS.
p DO NOT OBSTRUCT THE UNIT’S
VENTILATION OPENINGS WITH
NEWSPAPERS, TABLECLOTHS,
CURTAINS, AND SIMILAR ITEMS.
p DO NOT PLACE SOURCES OF NAKED
FLAMES, SUCH AS LIGHTED CANDLES,
ON THE UNIT.
p DISPOSE OF BATTERIES IN AN
ENVIRONMENTALLY FRIENDLY MANNER.
THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA
The following mark and symbols are located on
bottom of the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE SCREWS.
NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
Marking sign is located on bottom of the unit.
(Bottom of product)
2
RQT8067
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
CAUTION:
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
p Reorient or relocate the receiving antenna.
p Increase the separation between the
equipment and receiver.
p Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
p Consult the dealer or an experienced
radio/TV technician for help.
Any unauthorized changes or modifications to
this equipment would void the user’s authority
to operate this device.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
The driver must not operate this unit
while the vehicle is moving.
Do not operate this unit where it can be
viewed by the driver.
Driver operation or viewing of this unit
while the vehicle is moving will cause
distraction which may result in serious
accident and personal injury or property
damage.
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT
REPAIR YOURSELF. REFER SERVICING TO
QUALIFIED PERSONNEL.
CAUTION!
DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR
EQUIVALENT TYPE RECOMMENDED BY
THE MANUFACTURER. DISCARD USED
BATTERIES ACCORDING TO THE
MANUFACTURER’S INSTRUCTIONS.
AC adaptor
This AC adaptor operates on AC between
100 V and 240 V.
But
p In the U.S.A. and Canada, the AC power
supply cord must be connected to a 120 V
AC power supply only.
p When connecting to an AC supply outside
of the U.S.A. or Canada, use a plug
adaptor to suit the AC outlet configuration.
p When connecting to a supply of greater
than AC 125 V, ensure the cord you use is
suited to the voltage of the AC supply and
the rated current of the AC adaptor.
p Contact an electrical parts distributor for
assistance in selecting a suitable AC plug
adaptor or AC cord set.
The socket outlet shall be installed near the
equipment and easily accessible or the mains
plug or an appliance coupler shall remain
readily operable.
This product may receive radio interference
caused by mobile telephones during use. If
such interference is apparent, please increase
separation between the product and the
mobile telephone.
THIS UNIT IS INTENDED FOR USE IN
MODERATE CLIMATES.
Table of contents
IMPORTANT SAFETY
INSTRUCTIONS . . . . . . . . . . . . 4
Accessories . . . . . . . . . . . . . . . . . . 5
Discs that can be played . . . . . . . 5
Preparations
Attaching the battery. . . . . . . 6
Recharging the battery . . . . . 6
The remote control . . . . . . . . 7
Adjusting the LCD angle . . . . 7
Play. . . . . . . . . . . . . . . . . . . . . . . . 8
Useful functions . . . . . . . . . . . . . 10
Enjoying higher quality
audio and video . . . . . . . . . . . 12
Program/Random play . . . . . . . . 13
Playing data discs . . . . . . . . . . . . 14
Playing HighMATTM discs . . . . . . 15
Playing programs/playlists
on RAM/DVD-RW (DVD-VR)
discs . . . . . . . . . . . . . . . . . . . . 15
Playing CD . . . . . . . . . . . . . . . . . . 15
Using On-Screen Menus. . . . . . . 16
Changing the player settings. . . . 18
Using this unit with
other equipment . . . . . . . . . . . 20
Using a Car DC Adaptor
(included) . . . . . . . . . . . . . . . . 21
Table of contents
WARNING:
Frequently asked questions. . . . 22
Tips for making WMA/MP3
and JPEG discs
(For CD-R/CD-RW) . . . . . . . . . 22
Specifications . . . . . . . . . . . . . . . 23
Troubleshooting guide . . . . . . . . 24
Maintenance . . . . . . . . . . . . . . . . 27
Limited Warranty
(ONLY FOR U.S.A.). . . . . . . . . 28
Product Service . . . . . . . . . . . . . . 29
Limited Warranty
(ONLY FOR CANADA) . . . . . . 30
Main feature index. . . . .Back cover
THE FOLLOWING APPLIES ONLY IN THE
U.S.A.
Notice:
This product has parts that contains a small
amount of mercury. It also contains lead in
some components. Disposal of these
materials may be regulated in your
community due to environmental
considerations. For disposal or recycling
information please contact your local
authorities, or the Electronics Industries
Alliance:<http://www.eiae.org.>
3
RQT8067
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
4
RQT8067
Read these operating instructions carefully before using the unit. Follow the safety instructions on the
unit and the applicable safety instructions listed below. Keep these operating instructions handy for
future reference.
11) Only use attachments/accessories specified by
1) Read these instructions.
the manufacturer.
2) Keep these instructions.
12) Use only with the cart, stand,
3) Heed all warnings.
tripod, bracket, or table
4) Follow all instructions.
specified by the
5) Do not use this apparatus near water.
manufacturer, or sold with the
6) Clean only with dry cloth.
apparatus. When a cart is
7) Do not block any ventilation openings.
used, use caution when
Install in accordance with the manufacturer’s
moving the cart/apparatus
instructions.
combination to avoid injury
8) Do not install near any heat sources such as
from tip-over.
radiators, heat registers, stoves, or other apparatus
13) Unplug this apparatus during lightning storms or
(including amplifiers) that produce heat.
when unused for long periods of time.
9) Do not defeat the safety purpose of the polarized
14) Refer all servicing to qualified service personnel.
or grounding-type plug. A polarized plug has two
Servicing is required when the apparatus has
blades with one wider than the other. A groundingbeen damaged in any way, such as power-supply
type plug has two blades and a third grounding
cord or plug is damaged, liquid has been spilled
prong. The wide blade or the third prong are
or objects have fallen into the apparatus, the
provided for your safety. If the provided plug does
apparatus has been exposed to rain or moisture,
not fit into your outlet, consult an electrician for
does not operate normally, or has been dropped.
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Batteries
1. Battery pack (Lithium ion battery pack)
pUse this unit to recharge the battery pack.
pDo not use the battery pack with
equipment other than the specified player.
pDo not use the player outside if it is
snowing or raining. (The battery pack is
not waterproof.)
pDo not get dirt, sand, liquids, or other
foreign matter on the terminals.
pDo not touch the plug terminals (K and
L) with metal objects.
pDo not disassemble, remodel, heat or
throw into fire.
2. Button-type battery (Lithium battery)
pInsert with poles aligned.
pDo not touch the terminals (K and L)
with metal objects.
pDo not disassemble, remodel, heat or
throw into fire.
pKeep out of reach of children
If any electrolyte should come into contact
with your hands or clothes, wash it off
thoroughly with water.
If any electrolyte should come into contact
with your eyes, never rub the eyes.
Rinse eyes thoroughly with water, and then
consult a doctor.
3. Disposing of the batteries
Check and follow your local regulations
before disposal.
CAUTION:
The batteries used in this device may
present a risk of fire or chemical burn if
mistreated. Do not disassemble or incinerate
the batteries. Do not heat the batteries above
the following temperatures.
Button-type battery
100 QC (212 QF)
Battery pack
60 QC (140 QF)
Do not recharge the button-type battery.
Replace only with Panasonic part number
indicated below:
Button-type battery (Lithium battery)
(for remote control)
CR2025
Battery pack
(Lithium ion battery pack)
CGR-H702
CGR-H703
Use of other batteries may present a risk of
fire or explosion.
THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA
A lithium ion/polymer battery
that is recyclable powers the
product you have purchased.
Please call 1-800-8-BATTERY
for information on how to
recycle this battery.
RBRC
TM
Li-ion
Accessories
p The included AC power supply cord and AC adaptor are for use with this unit only.
Do not use them with other equipment.
p Optional battery pack (Lithium ion battery pack) CGR-H703, CGR-H702
Discs that can be played
Operations in these instructions are described mainly with reference to specific formats.
Icons such as [RAM] show the formats.
DVD-RAM [RAM] [JPEG]
p [RAM] Recorded with devices using Version 1.1 of the Video
Recording Format (a unified video recording standard), such as DVD
video recorders, DVD video cameras, personal computers, etc.
p [JPEG] Recorded with Panasonic DVD-Video recorders using DCF
(Design rule for Camera File system) Standard Version 1.0. To play
JPEG files, select “Play as Data Disc” (➜ page 17, Other Menu).
DVD-Video [DVD-V]
Discs marked with labels containing the
region number “1” or “ALL”
—
Example:
1
ALL
1
2
4
DVD-R (DVD-Video)/DVD-RW (DVD-Video) [DVD-V]
Discs recorded and finalizeda on DVD video recorders or DVD video cameras
DVD-RW (DVD-VR) [DVD-RW[‹VR›]
Discs recorded and finalizeda on DVD video recorders or DVD video
cameras using Version 1.1 of the Video Recording Format (a unified
video recording standard).
KR (Video)/KRW (Video) [DVD-V]
Discs recorded and finalizeda on DVD video recorders or DVD video cameras
Video CD [VCD]
Including SVCD (Conforming to IEC62107)
Accessories/Discs that can be played
Use numbers indicated in parentheses when asking for replacement parts.
(Product numbers correct as of February 2005. These may be subject to change.)
(Only for U.S.A.) To order accessories, refer to “Accessory Purchases” on page 29.
(For other areas) To order accessories, call the dealer from whom you have made your purchase.
t1 Remote control (N2QAHC000021)
t1Rechargeable battery pack
[DVD-LS90]
(CGR-H702)
t1 Button-type battery for remote control
(for replacement, see page 7.)
[DVD-LS93]
(CGR-H703)
t1Audio/video cable (K2KA6CB00003)
For replacement: Available from Panasonic dealers
t1AC adaptor (RFEA213W)
t1Car DC Adaptor (RFEC201M)
t1AC power supply cord (K2CB2CB00006)
CD [CD] [WMA] [MP3] [JPEG] [VCD]
p This unit can play CD-R/RW recorded with the above formats. Close
the sessions or finalizea the disc after recording.
p [WMA] [MP3] [JPEG] This unit also plays HighMAT discs.
a
A process that allows play on compatible equipment.
p It may not be possible to play the above discs in all cases due to the type of disc or condition of the recording.
w Discs that cannot be played
DVD-Audio, DVD-ROM, Version 1.0 of DVD-RW, CD-ROM, CDV, CD-G, SACD, DivX Video Discs and
Photo CD, DVD-RAM that cannot be removed from their cartridges, 2.6-GB and 5.2-GB DVD-RAM,
PAL discs and “Chaoji VCD” available on the market including CVD, DVCD and SVCD that do not
conform to IEC62107.
Note about using a DualDisc
p The digital audio content side of a DualDisc does not meet the technical specifications of the
Compact Disc Digital Audio (CD-DA) format so play may not be possible.
p Do not use a DualDisc in this unit as it may not be possible to insert it correctly and it may get
scratched or scraped.
5
RQT8067
Preparations
Attaching the battery (When the unit is off)
The illustrations show how to attach the CGR-H702. Attach CGR-H703 in the same way.
Bottom side of this unit
RELEASE
Preparations
DETACH
RELEASE
Clicks into place
Battery pack
DETACH
ATTACH
ATTACH
Check to make sure it is securely fastened.
Detaching
p Turn the unit off before detaching the battery pack.
p The illustrations show how to detach the CGR-H702. Detach CGR-H703 in the same way.
When not using for long periods of
time
p Remove the battery pack (➜ left).
(Even when the unit is turned off, there is a
small amount of voltage running through the
unit, and this may result in a malfunction.)
pRecharge the battery for re-use.
RELEASE
DETACH
ATTACH
Press and hold
Recharging the battery (When the unit is off)
AC power supply cord
(included)
1
DC IN 12 V%
AC adaptor
(included)
DC IN
2
3
To
household
AC outlet
DC IN 12V
VIDEO
AUDIO/OPT OUT
p You can also use this unit without charging while
connecting the AC adaptor and the AC power supply
cord.
To conserve power
This unit consumes 0.5 W of power even when turned
off. When the unit is not going to be used for a long time,
disconnect the AC power supply cord from the
household AC outlet.
6
RQT8067
The unit is in the standby condition (the [¦] indicator
lights) when the AC mains lead is connected. The
primary circuit is always “live” as long as the AC adaptor
is connected to an electrical outlet.
CHG
Started
¦
Finished
goes out ➜ lights
[¦]
[CHG] lights
➜ goes out
Recharging time :
[DVD-LS90]: Approx. 8 hours
[DVD-LS93]: Approx. 13 hours
When finished, disconnect the AC
adaptor and the AC power supply cord.
Checking the remaining battery charge
When the unit is on (➜ page 8) and powered by the battery pack
Press [DISPLAY] to check on the LCD (Displays for a few seconds).
Recharge (Appears automatically when there is only a
few minutes of charge remaining.)
Approximate play times (Hours)
Play (at room temperature using headphones)
Battery pack
LCD brightness level
LCD Off
L5
0 (factory preset)
K5
CGR-H702
6
4
3
8
CGR-H703
10
8
6
16
Preparations
(screen)
p The times indicated above may differ depending on use.
p To change the LCD brightness (➜ page 11, Adjusting the picture quality on the LCD).
The remote control
Insert the button-type
battery (included)
Range of use
Bottom
3
1 2
30o
30o
While sliding (),
pull out ().
Aim at the sensor. Maximum
range is up to 7 m (23 feet).
A facing up
Lithium battery: CR2025
p Keep out of the small children.
p Accidental swallowing of batteries can result in
stomach and intestinal damage.
Adjusting the LCD angle
Standard
Free
Compact
Open the LCD
Slide
Clicks!
When moving the unit : Close the LCD. Don’t hold by the LCD.
7
RQT8067
Play
1
Headphone terminals [¤]
3.5 mm (1/8S) Stereo
Open the lid.
OPEN
2
Insert a disc and
close the lid.
Play
Click into
place
3
Press and hold.
Load double-sided discs so
the label for the side you
want to play is facing up.
[RAM] Remove discs from their
cartridges before use.
4
Adjust the volume.
ON
VOL
The unit turns on and play
begins.
p While stopped, the unit automatically turns off once 15 minutes (after approximately 5 minutes when
using the battery pack) have elapsed.
p Discs continue to rotate while menus are displayed. Press [w, –OFF] when you finish to preserve
the unit’s motor.
p Total title number may not be displayed properly on KR/KRW.
p If you are experiencing problems, refer to troubleshooting guide (➜ page 24).
Main unit operations
ON
Turn unit on/play
Press and hold and the power comes on and play
begins.
Pause
Press [, ON] to restart play.
The position is memorized when “” flashes on
the screen.
p Press [, ON] to resume.
OFF
Stop
p [DVD-V] While the message is displayed,
press [, ON] and the previous chapters are
reviewed.
Opening the lid, or pressing [w, –OFF] while “”
is flashing cancels the memorized position where
play stopped.
8
RQT8067
Turn unit off
Press and hold until “OFF” is displayed.
TOP MENU
Skip
Press [,].
[RAM] [DVD-RW[‹VR›] Can also skip to the markers.
Search
Press and hold [,] (up to 5 steps).
Slow play
Press and hold [,] (up to 5 steps)
while paused.
Press [, ON] to return to normal play.
[VCD] [] only
Top menu
[DVD-V]
MENU
Menu
[DVD-V]
Playing playlists
[RAM] [DVD-RW[‹VR›] (➜ page 15)
Navigation menu
[WMA] [MP3] [JPEG] (➜ page 14)
Return
Returns to the previous screen.
[VCD] (with playback control) Returns to the menu.
Menu operation
Press [ ] to select an item and press
[ENTER] to confirm.
Frame-by-frame
While paused, press [ ].
[VCD] [] only
Group skip
[WMA] [MP3] [JPEG]
Press [ ].
RETURN
Play
Playing programs [RAM] [DVD-RW[‹VR›] (➜ page 15)
ENTER
Remote control operations
Skip
Press [,].
Search
Press [, ] (up to 5 steps).
Slow play
Press [, ] (up to 5 steps) while paused.
Press [] (PLAY) to return to normal play.
[VCD] [] only
[RAM] [DVD-RW[‹VR›] [DVD-V] [VCD] [CD]
e.g. To select 12:
[510] ➜ [1] ➜ [2]
1
2
3
4
5
6
>
= 10
7
8
9
0
Enter number
[VCD] with playback control
While stopped, press the numbered buttons.
[WMA] [MP3] [JPEG]
e.g. To select 123:
[1] ➜ [2] ➜ [3] ➜ [ENTER]
p You cannot turn on the unit with the remote control if the unit is powered by the battery pack.
9
RQT8067
Useful functions
Repeat play (Only when the elapsed play time can be displayed.
For JPEG, you can use even if there is no elapsed time display.)
Press several times to select the content to
repeat.
Menu
Repeat
Off
pTo exit the screen : Press [RETURN].
To repeat a specified section (A-B Repeat)
Except [JPEG] and [RAM] [DVD-RW[‹VR›] (still picture part)
1
DISPLAY
2
ENTER
Useful functions
Press once.
Press [] to select
Menu
Other Settings.
Press [] to go to the next A-B Repeat
menu and [] to select
“Play Menu”.
Press [] to go to the next
menu and [] to select
“A-B Repeat”.
Press [ENTER] at the starting
and ending points.
p Press [ENTER] again to cancel.
p To exit the screen : Press [RETURN].
Changing play speed [RAM] [DVD-RW[‹VR›] [DVD-V]
1
DISPLAY
2
ENTER
Press once.
Press [] to select Other Settings.
Press [] to go to the next menu and [] to
select “Play Speed”.
Press [ENTER] and [] to select
“Normal” or “M0.6” to “M1.4” (in 0.1 units).
Press [ENTER].
p Press [] (PLAY) to return to normal play.
p After you change the speed
– Advanced Surround (➜ below) and Multi Re-master (➜ page 12) do not work.
– Digital output switches to PCM-2ch.
– 96 kHz sampling frequency is converted to 48 kHz.
p This may not work depending on the disc’s recording.
p To exit the screen : Press [RETURN].
Enjoying virtual surround (Advanced Surround)
[RAM] [DVD-RW[‹VR›] [DVD-V] [VCD] (2 or more channels)
A.SURROUND
Press to select “SP 1 Natural” or “SP 2 Enhanced”.
10
RQT8067
A surround sound effect can be made using 2 speakers (on other equipment).
p When using headphones, press to select “HP 1 Natural” or “HP 2 Enhanced”.
p When using discs recorded with surround sound, sound seems to come from speakers on either
side of you.
p Optimum seating position is 3 to 4 times the distance between the front left and right speakers or the
width of the television if using the television’s speakers.
p Do not use in combination with surround effects on other equipment.
p To exit the screen : Press [RETURN].
Selecting how to show 4:3 aspect pictures on the LCD
MONITOR
MODE
Press to select the monitor mode.
p If you are not using the LCD on this
NORMAL:Normal
unit, select “OFF” to conserve power.
FULL:
Stretched horizontally
ZOOM: Stretched vertically and horizontally (The [¦] indicator flashes)
p The LCD turns off automatically if
OFF:
No picture
you close it.
Adjusting the picture quality on the LCD
1
2
PICTURE
MODE
Press [] to select the item, and [ ]
to change the setting.
ENTER
p To exit the screen : Press [PICTURE MODE].
Changing soundtracks [DVD-V] (with multiple soundtracks) [RAM] [DVD-RW[‹VR›] [VCD]
Menu
Press to select the soundtrack.
(Remote control)
Audio
1
Signal type/data
[RAM] [DVD-RW[‹VR›] [VCD]
LPCM/§ Digital/DTS/MPEG: Signal type
You can use this button to select
kHz (Sampling frequency)/bit/ch (Number of channels)
“L”, “R” or “L R”.
Example: 3/2 .1ch
[DVD-V] (Karaoke discs)
.1: Low frequency effect
Press [] to select
(not displayed if there is no signal)
“On” or “Off” for vocals.
.0: No surround
Read the disc’s instructions for details.
1: Mono surround
2: Stereo surround (left/right)
p To exit the screen : Press [RETURN].
1: Center
2: Front leftKFront right
3: Front leftKFront rightKCenter
Useful functions
AUDIO
Changing subtitles [DVD-V] (with subtitles) [VCD] (SVCD only)
[RAM] [DVD-RW[‹VR›]
(On/Off only with discs that contain subtitle on/off information)
SUBTITLE
Menu
Subtitle
(Remote control)
[DVD-V] [VCD]
Off
Press to select the subtitle language.
p On KR/KRW, a subtitle number may be shown for subtitles that are not displayed.
To clear/display the subtitles
Press [ ] to select “On” or “Off”.
[RAM] [DVD-RW[‹VR›]
Press to select “On” or “Off”.
p Subtitle on/off information cannot be recorded using Panasonic DVD Recorders.
p To exit the screen : Press [RETURN].
Angle select [DVD-V] (with multiple angles) / Still picture rotation [JPEG]
ANGLE
Press to select the angle or
rotate the still picture.
(Remote control)
p To exit the screen : Press [RETURN].
e.g. [DVD-V]
Menu
Angle
1/4
11
RQT8067
Enjoying higher quality audio and video
Multi Re-master
[RAM] [DVD-RW[‹VR›] [DVD-V] (Discs recorded with 48 kHz only) [VCD] [CD]
This feature gives you a more natural sound by adding the higher frequency signals not recorded on
the disc.
[WMA] [MP3] (Disc recording is other than 8 kHz, 16 kHz or 32 kHz)
This feature reproduces the frequencies lost during recording to give you a sound closer to the original.
1
2
DISPLAY
Menu
ENTER
Multi Re-master
Press [] to select Other Settings.
Press [] to go to the next menu and [] to select
“Audio Menu”.
Press [] to go to the next menu and [] to select
“Multi Re-master”.
Press [ENTER] and [] to select “1”, “2” or “3”.
Press [ENTER].
Enjoying higher quality audio and video
Press once.
p To exit the screen : Press [RETURN].
[DVD-V] [CD] (LPCM)
Type of music
Other discs
Effect level
1
High tempo (e.g., pop and rock)
Light
2
Various tempos (e.g., jazz)
Medium
3
Low tempo (e.g., classical)
Strong
Off
Off
Setting
Off
p Multi Re-master may not work when connecting with a digital optical cable (➜ page 20).
Picture Mode
1
DISPLAY
2
Menu
ENTER
Picture Mode
Press once.
p To exit the screen : Press [RETURN].
RQT8067
Normal
Press [] to select Other Settings.
Press [] to go to the next menu
and [] to select “Picture Menu”.
Press [] to go to the next menu and select “Picture Mode”.
Press [ENTER] and [] to select
“Normal”, “Cinema1” or “Cinema2”.
Press [ENTER].
Cinema1: Mellows images and enhances detail in dark scenes.
Cinema2: Sharpens images and enhances detail in dark scenes.
12
1
The above indicated features may not work depending on the disc’s recording.
Program/Random play [Remote\control\only]
[DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
PLAYMODE
While stopped
Program play Random play
Off (Normal play) Press to change.
p Disable HighMAT disc play to use random and program play.
Select “Play as Data Disc” in Other Menu. (➜ page 17).
Program play (up to 32 items)
1
Press to select an item
(➜ page 9).
Choose a title and chapter.
No. Title Chapter Time
11
Play
1
2
3
Clear
4
5
6
>
= 10
7
8
9
0
2
PLAY
Clear all
Repeat this step to program
other items.
Selecting all the items (on the disc or in the title or group)
Press [ENTER] and [] to select “ALL”, then press [ENTER] again to register.
Changing the program
Press [] to select an item.
–To change an item, repeat step 1.
–To clear an item, press [CANCEL] (or select “Clear” and press [ENTER]).
Program/Random play
e.g. [DVD-V]
Clearing the whole program
Select “Clear all” and press [ENTER]. The whole program is also cleared when the unit is turned off or
the disc lid is opened.
Random play
e.g. [DVD-V]
1
[DVD-V] [WMA] [MP3] [JPEG] only
2
Random
Press Playback
PLAY to start
Choose a title.
Title 1
0 ~ 9 to select
1
2
3
4
5
6
>
= 10
7
8
9
0
Press to select a group
or a title (➜ page 9).
PLAY
PLAY to start
To exit the program or random mode
Press [PLAYMODE] several times while stopped.
13
RQT8067
Playing data discs [WMA] [MP3] [JPEG]
You can play JPEG files on DVD-RAM or play HighMAT discs without using the HighMAT function
(➜ page 17, “Play as Data Disc” in Other Menu).
Playing items in order (Playback Menu) (except JPEG files on DVD-RAM)
While the menu is displayed
Press [] to select “All”, “Audio”, or “Picture” and press [ENTER].
ENTER
p To display/exit the screen : Press [TOP MENU].
Playing from the selected item (Navigation Menu)
1
MENU
2
Group and content number currently playing
Navigation Menu
002 My favorite2 005 Japanese 001 Lady Starfish
ENTER
Playing data discs
Press.
Perfume
001 My favorite1
002 My favorite2
001 Brazilian
002 Chinese
003 Czech
004 Hungarian
005 Japanese
006 Mexican
007 Philippine
008 Swedish
009 Piano
010 Vocal
Press []
to select the group
and press [ENTER].
p To play content in the
group in order:
:JPEG
:WMA/MP3
Content 0001/0004
DISPLAY to display the sub menu
Group
JPEG
001 Lady Starfish
002 Metal Glue
003 Life on Jupiter
004 Starperson
Group 005/023
Press [ENTER].
p To start play from the
selected content:
5
RETURN
to exit
Number currently
selected
Audio/picture contents
Press [] to select and
press [ENTER].
pTo listen to WMA/MP3 contents while showing a JPEG image on the screen
Select a JPEG file first, and then select WMA/MP3 contents. (The opposite order is not effective.)
pTo exit the screen : Press [MENU].
w Using the submenu
While the navigation menu (➜ see above) is displayed.
Submenu
1 Press [DISPLAY].
2 Press [] to select
the sub menu
(➜ see right) and
press [ENTER].
Multi
List
Tree
Thumbnail
Next group
Previous group
Groups and content
Content only
Groups only
Thumbnail images [JPEG]
To the next group [WMA] [MP3]
All
Audio
Picture
WMA/MP3 and JPEG files
WMA/MP3 files only
JPEG files only
To switch between guide messages and the
elapsed play time indicator
To search by content or group title (➜ see below)
Help display
Find
To the previous group [WMA] [MP3]
w Searching by a content or group title
Press [ ] to highlight a group title to search a group, or a content title to search its content.
1 Select “Find”. (➜ see above)
2 Press [] to select a character and press [ENTER].
14 3
RQT8067
pRepeat to enter another character.
pLower case is also searched.
pPress and hold [,] to skip between A, E, I, O and U.
pPress [] to erase a character.
pErase the asterisk (_) to search for titles starting with that character.
Press [] to select “Find” and press [ENTER]. The search result screen appears.
4 Press [] to select the content or group and press [ENTER].
Playing HighMATTM discs [WMA] [MP3] [JPEG]
ENTER
While the menu is displayed
Menu:
Press [ ] to select items
and press [ENTER].
Takes you to the next menu which
shows playlists or another menu.
Playlist:
Play starts.
p To return to the menu screen, press [TOP MENU] then press [RETURN] several times.
p To change the menu background, press [DISPLAY]. The background changes to the one recorded on the disc.
p To display/exit the screen, press [TOP MENU].
Pink Island
All By Artist
Playlist
Selecting from the list
No.
Content title
1 Few times in summer
2 Less and less
Playlist
Group
3
4
5
6
Content
And when I was born
Quatre gymnopedies
You've made me sad
I can't quit him
7 Evening glory
8 Wheeling spin
9 Velvet Cuppermine
10 Ziggy starfish
0
9
to select
ENTER to play
RETURN
to exit
Playing programs/playlists on
RAM/DVD-RW (DVD-VR) discs [RAM] [DVD-RW[‹VR›]
pTitles appear only if they have been entered.
pYou cannot edit playlists and titles.
1
To play programs:
2
To play playlists:
TOP MENU
MENU
ENTER
No.
Date
On
1
2
3
4
5
11/ 1(WED)
1/ 1 (MON)
2/ 2 (TUE)
3/ 3 (WED)
4/10(THU)
0:05 AM
1:05 PM
2:21 PM
3:37 PM
11:05 AM
0
Press [] to select the
program or playlist and
press [ENTER].
Playlist
Direct Navigator
Contents
Title
Monday feature
Auto action
Cinema
Music
Baseball
9 to select and press ENTER
RETURN
to exit
0
No.
1
2
Date
11/1
1/ 1
Length
0:00:01
0:01:20
Title
City Penguin
Ashley at Prom
3
4
5
2/ 2
3/ 3
4/10
1:10:04
0:10:20
0:00:01
Formula one
Soccer
Baseball
6
7
4/11
4/ 15
0:00:01
0:01:10
City Penguin
Ashley at Prom
8
9
10
4/ 17
4/ 20
4/22
0:13:22
0:05:30
0:07:29
Formula one
Soccer
Baseball
9 to select and press ENTER
RETURN
to exit
p Only when the disc contains a playlist.
p You can also use the numbered buttons on the remote control (➜ page 9).
p Press [] to show the contents of the program (Only when playing the program).
p To exit the screen : Press [TOP MENU] or [MENU].
Playing CD [CD]
Titles appear with CD text playback.
1
2
e.g. CD text
MENU
CD Text
Disc Title:
Disc Artist:
Track Title:
Track Artist:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
1/23
2 01
All By Artist
Pink Island
Long John Platinum
SHIPWRECKED
ENTER
Ashley at Prom
City Penguin
Formura one
Soccer
Baseball
Neanderthal
Cartoons
Trilobites
White Dwarf
Discovery
to select and press ENTER
Press [] to select the
tracks and press
[ENTER].
p To exit the screen : Press [MENU].
RETURN
to exit
Press [DISPLAY] to switch between guide messages and the elapsed play time indicator.
Playing HighMAT™ discs/Playing programs/playlists on RAM/DVD-RW (DVD-VR) discs/Playing CD
1. During play, press [MENU].
2. Press [] then [] to switch among “Playlist”, “Group” and
“Content” lists.
3. Press [] then [] to select an item and press [ENTER].
p To exit the screen : Press [MENU].
15
RQT8067
Using On-Screen Menus
1
DISPLAY
Press once.
2
ENTER
Press [] to select the menu.
Press [] to go to the next menu
and [] to set.
Repeat step if necessary.
p Press [] to go to the previous menu.
p Items shown differ depending on the type of software.
p There are items which you can select using the numbered buttons and [ENTER] on the remote control.
p If the setting does not change, press [ENTER].
p To finish, press [RETURN].
Main menus
Using On-Screen Menus
Program, Group, Title To start from a specific item
Chapter, Track, Playlist
Content
To skip incrementally or decrementallya (Time Slip for play only)
1. Press [ENTER] twice to show Time Slip indicator.
2. Press [] to select the time and press [ENTER].
pPress and hold [] to alter faster.
To start from a specific timea (Time Search)
To change remaining/elapsed time display
Time
(➜ page 11, Changing soundtracks)
Audio
To display the current bitrate or sampling frequency
Thumbnail
To show thumbnail images
Subtitle
(➜ page 11, Changing subtitles)
Marker(VR)
To recall a marker recorded on DVD-Video recorders
Angle
(➜ page 11, Angle select)
Rotate picture
(➜ page 11, Still picture rotation)
Slideshow
To turn on/off slideshow
To change the slideshow timing (0–30 sec)
Other Settings
(➜ See below)
a
Except KR/KRW
Other Settings
(➜ page 10, Changing play speed)
Play Speed
Play Menu (Only when the elapsed play time can be displayed,
[JPEG]: The Repeat and Marker functions can be used.)
Repeat
(➜ page 10, Repeat play)
A-B Repeat
(➜ page 10, A-B Repeat)
Marker
Except [RAM] [DVD-RW[‹VR›]
16
RQT8067
To mark up to 5 positions to play again
[ENTER] (The unit is now ready to accept markers.)
To mark a position:
[ENTER] (at the desired point)
To mark another position: [ ] to select “_”➜ [ENTER]
To recall a marker:
[ ] ➜ [ENTER]
To erase a marker:
[ ]➜ [CANCEL] (Remote control)
p This feature doesn’t work during program and random play.
p Markers you add clear when you open the disc lid or switch the unit
to standby.
Picture Menu
Picture Mode
(➜ page 12, Picture Mode)
Audio Menu
Advanced Surround
(➜ page 10, Enjoying virtual surround)
Dialogue Enhancer
To make the dialogue in movies easier to hear
[DVD-V] (Dolby Digital, DTS, 3-channel or over, with the dialogue
recorded in the center channel)
On Off
Multi Re-master
(➜ page 12, Multi Re-master)
Information
On Off ([JPEG]: Off, Date, Details)
Subtitle Position
0 to U60 (in of 2 units)
Subtitle Brightness
Auto, 0 to U7
Just Fit Zoom
]RAM\ [DVD-RW[‹VR›] [DVD-V] [VCD]
To expand the letterbox picture to fit the screen.
Press [] to select the preset aspect ratio or “Auto”.
Manual Zoom
]RAM\ [DVD-RW[‹VR›] [DVD-V] [VCD]
Press [] for fine adjustments. (Press and hold to alter faster.)
–from M1.00 to M1.60 (in 0.01 units)
–from M1.60 to M2.00 (in 0.02 units)
Bitrate Display
]RAM\ [DVD-RW[‹VR›] [DVD-V] [VCD] On Off
GUI See-through
On Off
Other Menu
Setup
(➜ page 18, Changing the player settings)
Play as DVD-VR
Play as HighMAT
or
Play as Data Disc
p While stopped, select “Play as Data Disc” to play JPEG files on
DVD-RAM or to play a HighMAT disc without using the HighMAT
function.
Using On-Screen Menus
Display Menu
Checking the play status (Elapsed play time indicator)
Press [DISPLAY] twice.
Condition–play, pause or slow/search
Current playback item
Play mode
Current position
: Normal Play
PGM: Program Play
RND: Random Play
PBC: Playback
control play [VCD]
Elapsed time/remaining time
Press [ ] to change. (WMA/MP3/SVCD can only display elapsed time.)
p To exit the screen : Press [RETURN].
17
RQT8067
Changing the player settings
[Remote\control\only]
p Referring to pages 18 to 19, change as required.
p Underlined items are the factory presets.
The settings remain intact even if you switch the unit to standby.
1
2
Press [ ] to select the
menu, item, content and press [ENTER].
SETUP
ENTER
Item
Menu
Content
Changing the player settings
Setup
Disc
Video
Audio
Subtitle
Automatic
Audio
Menus
English
Ratings
level 8
English
Display
Others
3421 to select and press [ENTER]
p To return to the previous screen, press [RETURN].
p To finish the SETUP menu, press [SETUP].
p While stopped, the menu is also displayed when
[MENU] on the main unit is pressed; however, when
a DVD-RAM or HighMAT CD is being used a playlist
menu appears.
[RETURN] to exit
“Disc” tab
Audio
Subtitle
Menus
Ratings
Set a ratings level
to limit DVD-Video
play.
p Follow the onscreen
instructions.
p English
p French
p Spanish
p Original (The original language designated on the disc is selected)
p Other____a
p Automatic [If the language selected for “Audio” is not available, subtitles
appear in that language (If available on the disc).]
p English
p French
pSpanish
pOther____a
p English
p French
p Spanish
p Other____a
Setting ratings (When level 8 is selected)
p 8 No Limit.
p 1 to 7: Prohibits play corresponding to ratings recorded on the disc.
p 0 Lock All: To prevent play of discs without ratings levels.
When setting a ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video exceeding the ratings level
is inserted in the unit. Follow the on-screen instructions.
aInput a code number referring to the table on page 19.
“Video” tab
TV Aspect
Choose the
setting to suit your
television and
preference.
Still Mode
18
RQT8067
Specify the type of
picture shown
when paused.
p 4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills
the screen (unless prohibited by the disc).
p 4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
p 16:9: Widescreen television
Use the television’s screen modes to change the way the
picture is shown.
p Automatic
p Field: The picture is not blurred, but picture quality is lower.
p Frame: Overall quality is high, but the picture may appear blurred.
“Audio” tab
Dolby Digitala
DTS Digital
Surrounda
Dynamic Range
Compression
Audio during
Search
Check the digital input limitations of the equipment you connect and select
the maximum sampling frequency of PCM digital output.
Off:
When not connected using a digital optical cable
Up to 48 kHz:
When connected to equipment compatible with 44.1 or 48 kHz
Up to 96 kHz:
When connected to equipment compatible with 88.2 or 96 kHz
Up to 192 kHz: When connected to equipment compatible with 176.4 or 192 kHz
pSignals from copy-protected discs are converted to 48 or 44.1 kHz.
pSome equipment cannot handle sampling frequencies of 88.2 kHz, even if it
can handle 96 kHz. Read your equipment’s operating instructions for details.
Bitstream
Select “Bitstream” when the
equipment can decode the bitstream
PCM
(digital form of multi-channel data).
PCM
Otherwise, select “PCM”. (If the
bitstream is output to the equipment
Bitstream
without a decoder, high levels of
noise can be output and may
damage your speakers and hearing.)
p Off
p On: Adjusts for clarity even when the volume is low through compressing
the range of the lowest sound level and the highest sound level.
Convenient for late night viewing. (Only works with Dolby Digital).
p On
p Off
Choose whether to
have sound during
search
aOnly when connected using a digital optical cable (➜ page 20)
“Display” tab
Menu Language
On-Screen Messages
p English
p Français
p On
p Off
p Español
“Others” tab
HighMAT
Selects the play method for
HighMAT discs
Re-initialize Setting
p Enable: Plays as HighMAT
p Disable: Plays as WMA/MP3/JPEG
p Yes: The password screen is shown if “Ratings” (➜ page 18) is
set. Please enter the same password and press [ENTER].
When “Initialized” appears on the screen, wait for about 10
seconds. Press [ENTER] and turn the unit off and on again.
This returns all values in the
Setup menus to the default
settings.
p No
Changing the player settings
PCM Digital
Outputa
Language code list
Abkhazian: 6566
Afar:
6565
Afrikaans: 6570
Albanian: 8381
Ameharic: 6577
Arabic:
6582
Armenian: 7289
Assamese: 6583
Aymara:
6589
Azerbaijani: 6590
Bashkir:
6665
Basque:
6985
Bengali; Bangla:
6678
Bhutani:
6890
Bihari:
6672
Breton:
6682
Bulgarian: 6671
Burmese: 7789
Byelorussian:
6669
Cambodian:7577
Catalan:
6765
Chinese: 9072
Corsican: 6779
Croatian: 7282
Czech:
6783
Danish:
6865
Dutch:
7876
English:
6978
Esperanto: 6979
Estonian: 6984
Faroese: 7079
Fiji:
7074
Finnish:
7073
French:
7082
Frisian:
7089
Galician: 7176
Georgian: 7565
German: 6869
Greek:
6976
Greenlandic:7576
Guarani:
7178
Gujarati:
7185
Hausa:
7265
Hebrew:
7387
Hindi:
7273
Hungarian: 7285
Icelandic: 7383
Indonesian: 7378
Interlingua: 7365
Irish:
7165
Italian:
7384
Japanese: 7465
Javanese: 7487
Kannada: 7578
Kashmiri: 7583
Kazakh:
7575
Kirghiz:
7589
Korean:
7579
Kurdish:
7585
Laotian:
7679
Latin:
7665
Latvian, Lettish:
7686
Lingala:
7678
Lithuanian: 7684
Macedonian:
7775
Malagasy: 7771
Malay:
7783
Malayalam: 7776
Maltese:
7784
Maori:
7773
Marathi:
7782
Moldavian: 7779
Mongolian: 7778
Nauru:
7865
Nepali:
7869
Norwegian: 7879
Oriya:
7982
Pashto, Pushto:
8083
Persian:
7065
Polish:
8076
Portuguese:8084
Punjabi:
8065
Quechua: 8185
Rhaeto-Romance:
8277
Romanian: 8279
Russian: 8285
Samoan: 8377
Sanskrit: 8365
Scots Gaelic:
7168
Serbian:
8382
Serbo-Croatian:
8372
Shona:
8378
Sindhi:
8368
Singhalese: 8373
Slovak:
8375
Slovenian: 8376
Somali:
8379
Spanish: 6983
Sundanese:8385
Swahili:
8387
Swedish: 8386
Tagalog:
8476
Tajik:
8471
Tamil:
8465
Tatar:
8484
Telugu:
8469
Thai:
8472
Tibetan:
6679
Tigrinya:
8473
Tonga:
8479
Turkish:
8482
Turkmen: 8475
Twi:
8487
Ukrainian: 8575
Urdu:
8582
Uzbek:
8590
Vietnamese:
8673
Volapük:
8679
Welsh:
6789
Wolof:
8779
Xhosa:
8872
Yiddish:
7473
Yoruba:
8979
Zulu:
9085
19
RQT8067
Using this unit with other equipment
Turn off all equipment before connecting and read the appropriate operating instructions.
Enjoying with 5.1ch audio
Digital optical cable (not included)
p Do not bend sharply.
p Align and insert.
Left side of this unit
AUDIO/OPT OUT
AV amplifier with Dolby
Digital/DTS logo (➜ page 19)
OPTICAL IN
Connect the 6 speakers to the amplifier’s
5.1ch audio output terminals.
p Change “PCM Digital Output”, “Dolby Digital”, and “DTS Digital Surround” (➜ page 19).
Using this unit with other equipment
Enjoying stereo audio
Amplifier/System component
Left side of this unit
Audio cable
(not included)
AUDIO/OPT OUT
White
Black
L
AUDIO IN
Red
R
Television connections
Connect the video output from this unit directly to the television.
VIDEO IN
AUDIO IN
R
L
Television
White
Yellow
Red
Audio/video cable
(included)
Yellow
VIDEO
Black
AUDIO/OPT OUT
Left side of this
unit
20
RQT8067
If you raise the volume on the television while playing this unit, the volume may abruptly become very
loud when you switch to a television broadcast. Return the volume to its normal level before changing.
Using a Car DC Adaptor (included)
Do not leave the unit on a surface that may become hot such as a dashboard. The unit is
not heat-resistant so may malfunction.
The driver must not operate this unit while the vehicle is moving.
Do not operate this unit where it can be viewed by the driver.
Driver operation or viewing of this unit while the vehicle is moving will cause distraction
which may result in serious accident and personal injury or property damage.
Connections
To the cigarette
lighter socket
Car DC Adaptor
(included)
DC IN
Left side of this unit
Place the unit on a stable surface.
Replacing the fuse
Replace only with the specified 125 V/250 V, 2.5 A fuse. Use of any other type can cause fire.
2
Replace the fuse. (125 V/250 V, 2.5 A type)
3
Close
1
Open
Cautions
Using a Car DC Adaptor (included)
Before connection, consult your car owner’s manual or your dealer.
p Connect to the cigarette lighter socket of a vehicle that has a 12 V battery. It is not compatible with a
vehicle that has a 24 V battery.
p This is a special negative grounded Car DC Adaptor. Using this Car DC Adaptor with a plus
grounded car can cause malfunction and lead to fire.
p To avoid draining your car battery
–Disconnect the Car DC Adaptor from the cigarette lighter after use. The Car DC Adaptor continues
to consume some power even if it is not being used, and if a battery pack is attached to this unit, it
will start recharging which uses more power.
–Do not use the Car DC Adaptor for long periods when the engine is not running.
–Do not recharge the battery pack with this Car DC Adaptor. Use the AC adaptor included with this unit.
p When starting an engine, pull Car DC Adaptor out of the cigarette lighter socket. Mishandling of the
Car DC Adaptor can cause malfunction.
p No responsibility will be taken for damage that occurs due to faulty installation.
p Leave some slack in the cord.
You can enjoy audio through your car audio system by connecting a car
stereo cassette adaptor (not included: RP-CC20) to the headphone jack on
the left side of this unit.
(Left side of this unit)
21
RQT8067
Frequently asked questions
Tips for making WMA/MP3 and JPEG discs (For CD-R/CD-RW)
Frequently asked questions
Reference pages are shown in parentheses.
22
RQT8067
What kind of equipment is
necessary to enjoy 5.1ch
audio?
Connect to an AV amplifier (that has 5.1ch audio output
terminals) displaying the Dolby Digital/DTS logo. (19)
Can I play a DVD-Video
bought in another country?
You can play if the region number includes “1” or “ALL” and the
video standard is NTSC. Check the disc jacket.
Can I use on an airplane or
in a hospital?
Electromagnetic waves that are emitted from this unit may affect
equipment on an airplane or in a hospital.
Please obey the rules and/or instructions indicated by the
hospital or airline.
Can I use in a car?
You can use this unit by connecting with the included
Car DC Adaptor for power. Damage may occur if you do not use
the specified car adaptor. (21)
Can I connect with a
computer?
You can enjoy use of the computer as a television monitor when
connecting with the AV input terminal on a computer. However,
you cannot operate this unit as peripheral equipment.
Tips for making WMA/MP3 and JPEG
discs (For CD-R/CD-RW)
p Discs must conform to ISO9660 level 1 or 2 (except for extended formats).
p This unit is compatible with multi-session but if there are a lot of sessions it takes more time for play
to start. Keep the number of sessions to a minimum to avoid this.
p If groups were created away from the root like “002 group” in the illustration below, the eighth one
and onwards are displayed on the same vertical line in the menu screen.
pThere may be differences in the display order on the menu screen and computer screen.
pThis unit cannot play files recorded using packet write.
Naming folders and files
e.g. [MP3]
(Files are treated as content and folders are treated as groups on this
root 001 group
unit.)
At the time of recording, prefix folder and file names. This should be with
001
numbers that have an equal number of digits, and should be done in the
001 track.mp3
order you want to play them (this may not work at times).
002 track.mp3
003 track.mp3
Files must have the extension:
002 group
“.WMA” or “.wma”
“.MP3” or “.mp3”
001 track.mp3
“.JPG”, “.jpg”, “.JPEG” or “.jpeg”
002 track.mp3
003 group
003 track.mp3
[WMA]
004 track.mp3
p You cannot play WMA files that are copy protected.
001 track.mp3
p This unit is not compatible with Multiple Bit Rate (MBR: a file that
002 track.mp3
contains the same content encoded at several different bit rates).
003 track.mp3
[MP3]
p This unit is not compatible with ID3 tags.
p Compatible sampling rate: 8, 11.02, 12, 16, 22.05, 24, 32, 44.1, and 48 kHz
[JPEG]
p JPEG files taken on a digital camera that conform to the DCF Standard Version 1.0 are displayed.
– Pictures taken using digital camera functions not supported by DCF like automatic picture rotation
may not be displayed.
– Files that have been altered, edited or saved with computer picture editing software may not be
displayed.
pThis unit cannot display moving pictures, MOTION JPEG and other such formats, still pictures other
than JPEG (e.g. TIFF) or play pictures with attached audio.
Operating temperature range:
K5 to K35 QC (K41 to K95 QF)
Operating humidity range:
5 to 85 % RH (no condensation)
Discs played [8 cm (3 \) or 12 cm (5 \)]:
(1) DVD (DVD-Video)
(2) DVD-RAM (DVD-VR, JPEGa4, 5)
(3) DVD-R (DVD-Video)
(4) DVD-RW (DVD-Video, DVD-VR)
(5) KR/RW (Video)
(6) CD, CD-R/RW [CD-DA, Video-CD,
SVCDa1, MP3a2, 5, WMAa3, 5, JPEGa4, 5,
HighMAT Level 2 (Audio and Image)]
Signal system:
NTSC
LCD screen:
9S α-Si, TFT wide-screen LCD
Composite-video output:
Output level:
1 Vp-p (75 j)
Output terminal:
Mini-jack
Number of terminals:
1 system
Audio output:
Output level: 1.5 Vrms (1 kHz, 0 dB, 10 kj)
Output terminal:
Stereo mini-jack
Number of terminals:
1 system
Audio performance:
(1) Frequency response:
p DVD (linear audio):
4 Hz to 22 kHz (48 kHz sampling)
4 Hz to 44 kHz (96 kHz sampling)
p CD audio:
4 Hz to 20 kHz
(2) S/N ratio:
p CD audio:
115 dB
(3) Dynamic range:
p DVD (linear audio):
98 dB
p CD audio:
97 dB
(4) Total harmonic distortion:
pCD audio:
0.008 %
Digital audio output:
Optical digital output: Mini optical terminal
Number of terminals:
1 system
(also used for audio output)
Pickup:
Wave length:
662 nm/785 nm (DVD/CD)
Laser power: CLASS II/CLASS I (DVD/CD)
Power supply:
DC 12 V (DC IN terminal)/
DC 7.2 V (Exclusive battery terminal)
Power consumption (using included AC adaptor):
13 W (Unit only: 10 W)
Power consumption in Standby mode
(using included AC adaptor):
approx. 0.5 W
Power consumption in Recharge mode
(using included AC adaptor):
13 W
AC adaptor:
Power source: AC 100 to 240 V, 50/60 Hz
Power consumption:
28 W
DC output:
12 V, 1.5 A
Car DC Adaptor:
DC input:
12 V, 20 W
DC output:
12 V, 1.5 A
Battery pack (lithium ion)
CGR-H702 ([DVD-LS90] included):
Voltage:
7.2 V
Capacity:
4700 mAh
CGR-H703 ([DVD-LS93] included):
Voltage:
7.2 V
Capacity:
8600 mAh
Dimensions (WMDMH)
(excluding protrusions and battery):
[DVD-LS90]:235.4 mmM178.6 mmM39.0a mm
(9 9/32SM7 1/32SM1 17/32S)
a
29.9 mm (1 3/16S) at lowest point
[D=185 mm (7 9/32S) including battery]
[H=51.5 mm (2 1/32S) including battery]
[DVD-LS93]:235.4 mmM178.6 mmM39.0a mm
(9 9/32SM7 1/32SM1 17/32S)
a
29.9 mm (1 3/16S) at lowest point
[D=201.4 mm (7 15/16S) including battery]
[H=51.5 mm (2 1/32S) including battery]
Mass (including battery):
[DVD-LS90]:1097 g (38.69 oz )
[DVD-LS93]:1280 g (45.15 oz )
Specifications
Specifications
]Note]
Specifications are subject to change without
notice. Mass and dimensions are approximate.
a1
Conforming to IEC62107
Compatible compression rate: between
32 kbps and 320 kbps
a3
Compatible compression rate: between
48 kbps and 320 kbps
a4
Exif Ver 2.1 JPEG Baseline files
Picture resolution: between 320M240 and
6144M4096 pixels (Sub sampling is 4:2:2 or
4:2:0)
a5 The total combined maximum number of
recognizable audio and picture contents and
groups: 4000 audio and picture contents and
400 groups.
a2
23
RQT8067
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check
points, or if the remedies indicated in the chart do not solve the problem, refer to the “Customer
Services Directory” on page 29 if you reside in the U.S.A., or refer to the “Product information” on
page 29 if you reside in Canada. In other areas, consult your dealer for instructions. (Reference pages
are shown in parentheses.)
The following do not indicate malfunction.
pSound from the AC adaptor during recharging.
pThe battery pack warming up when recharging or during use.
pThe surface and area around the unit becoming warm when used for long periods.
Power
p Check connections to the AC adaptor or battery pack. (6)
p You cannot turn on the unit with the remote control if the unit is
powered by the battery pack.
p The unit has protection circuitry that is activated if it becomes too hot
or too cold. The unit will not work if this occurs. Use the unit between
5 QC (41 QF) and 35 QC (95 QF).
Unit turns off
p The unit turns off after it has been stopped for about 15 minutes
automatically.
(5 minutes when the unit is powered by the battery pack) to conserve
power. Turn the unit on again.
p The battery pack can only be recharged when the unit is off.
Cannot charge or the
p The charging time increases when the temperature is too hot or too
[CHG] indicator fails to
cold, and charging may not be possible under some circumstances.
light.
p Check connections to the AC adaptor or battery pack. (6)
Play time dramatically
p The battery pack has reached the end of its service life (It can be
reduced after recharging.
recharged about 300 times).
Troubleshooting guide
No power.
No operation
p This unit cannot play discs other than the ones listed in these
operating instructions. (5)
p The unit may not be operating properly due to lightning, static
electricity or some other external factor. Turn the unit off and then
back to ON. Alternatively, turn the unit off, disconnect the power
source (AC or battery pack), and then reconnect it.
p Condensation has formed: Wait 1 to 2 hours for it to evaporate.
No response when
p Check that the battery is installed correctly. (7)
p The battery is depleted: Replace it with new one. (7)
remote control buttons
p Point the remote control at the remote control sensor and operate.
pressed.
(7)
You have forgotten your
p While stopped, press and hold [] and [] on the unit and then
also press and hold [, ON] on the unit until “Initialized” disappears
ratings password.
from the screen. Turn the unit off and on again. All settings will return
Reset all the settings to Factory
to the default values.
Preset.
No response when any
buttons pressed.
No picture or sound.
24
RQT8067
p Check that the disc has something recorded on it.
Specific operation impossible or incorrect
p Play may take time to begin when an MP3 track has still picture data.
Even after the track starts, the correct play time will not be displayed;
however, this is normal.
The program and random p These functions do not work with some DVD-Videos.
play functions do not
work. [DVD-V]
p Press [w] twice and then press [] (PLAY).
Menu doesn’t appear.
[VCD] with playback control
Subtitle position is
p Adjust the position. (“Subtitle Position” in Display Menu) (17)
wrong.
No subtitles.
p Display the subtitles. (11)
The subtitles overlap
p Clear the subtitles. (11)
closed captions recorded
on discs.
p The end of an item becomes point B when it is reached.
In A-B repeat, point B is
automatically set.
Play doesn’t start. [WMA] p This unit may not play WMA that contains still picture data.
It takes time before play
starts. [MP3]
Picture incorrect
p Select a monitor mode other than “OFF” (no picture). (11, Selecting
how to show 4:3 aspect pictures on the LCD).
The LCD is dark.
p Adjust the brightness. (11)
LCD pixels turn black or
p The LCD is constructed with precision technology so 99.99 % of the
radiate different colors.
pixels are active, but of the remaining of 0.01 %, there are pixels that
may be black or emit light constantly. This phenomenon is not a
malfunction.
Picture doesn’t appear on p Check connections. (20)
the television (or the size p Check that the television is on.
of the picture seems
p Check that the input mode on the television is correct.
wrong).
p Check the settings in “Video—TV Aspect”. (18)
p Turn off the zooming feature on your television if you are using Zoom.
(17)
p Ensure that the unit is connected directly to the television, and is not
connected through a video cassette recorder. (20)
Menu not displayed
p Restore the zoom ratio to C1.00. (17)
correctly.
p Set “Subtitle Position” in Display Menu to “0”. (17)
Auto zoom function does p Use the other preset aspect ratios or manual adjustment. (17)
not work well.
p Zoom function may not work well, especially in dark scenes and may
not work depending on the type of disc.
Troubleshooting guide
No picture on the LCD.
25
RQT8067
Troubleshooting guide
Sound incorrect
Sound distorted.
Piercing noise comes
from the speakers.
Effects do not work.
No sound from the unit’s
speaker.
No sound from other
speakers.
No sound when you
change the play speed.
p Select “Off” in “Advanced Surround”. (10)
p Move unit away from mobile phones.
p Noise may occur when playing WMA files.
p If you have connected a digital amplifier which does not include
decoder, be sure to select “PCM” in “Dolby Digital” or “DTS Digital
Surround” in “Audio” tab. (19)
p None of the audio effects work when the unit is connected through
the digital optical cable and is outputting bitstream signals. (20)
p Some audio effects do not work or have less effect with some discs.
p Advanced Surround and Multi Re-master do not work if you have
changed the play speed.
p The speaker is off if the LCD is closed or headphones are connected.
p Turn up the volume. (8)
p Check all connections and settings. (20)
p There may be a pause in sound.
Troubleshooting guide
Recording
Cannot record to digital
recording equipment.
(Incorrect sound
recorded.)
Displays
“”
No On-Screen display.
“Check the disc.”
“
ERROR 01”
“
ERROR 02”
“
ERROR 03”
“H tt”
tt stands for a
number.
“Cannot display group
xx, content xx”
26
RQT8067
p You cannot record WMA/MP3.
p You cannot record DVDs that have protection preventing digital
recording.
p You cannot record DVDs if the recording equipment cannot handle
signals with a sampling frequency of 48 kHz.
p Make the following settings:
– Advanced Surround:
Off (10)
– PCM Digital Output:
Up to 48 kHz (19)
– Dolby Digital/DTS Digital Surround:
PCM (19)
p The operation is prohibited by the unit or disc.
p Select “On” for “On-Screen Messages” in “Display” tab. (19)
p Clean the disc. (27)
p A problem has occurred with the battery pack. Consult your dealer.
p The battery pack has been recharging for 12 hours but has failed to
recharge for some reason. Recharge again.
p You are recharging in a location that is too hot or too cold. Recharge
at normal temperature [K5 to K35 QC (K41 to K95 QF)].
p Trouble has occurred. The number appearing after “H” depends on
the problem. Turn the unit off and on again. Alternatively, turn the unit
off, disconnect the power source (AC or battery pack), reconnect the
power and turn the unit on again.
If the service numbers fail to clear, note the service numbers and
consult your dealer.
p You are trying to play incompatible groups or content. (22)
[¦] and [CHG] indicators
The [¦] indicator
flashes rapidly.
p The unit has malfunctioned. Consult your dealer.
The [¦] indicator
flashes slowly.
p The unit is on and the LCD is closed or the monitor mode is set to
“OFF” (no picture). Turn the unit off when you have finished.
The [CHG] indicator
flashes rapidly.
p There is a problem with the battery pack. Turn the unit on and check
the message on the LCD. (26)
The [CHG] indicator
flashes slowly.
p Battery pack charge is low. The unit will turn off automatically after a
few minutes.
Maintenance
To clean this unit, wipe with a soft, dry cloth.
p Use eyeglass cleaner to remove stubborn dirt from the LCD.
p Never use alcohol, paint thinner or benzine to clean this unit.
Maintenance of the lens
p Remove dust carefully with an air blower for camera lenses (optional).
p Recommended product:
Lens cleaner kit (SZZP1038C)
(Available from Panasonic dealers.)
p You cannot use a CD type lens cleaner.
p Be careful not to touch the lens with your fingers.
p Wipe with a damp cloth and then wipe dry.
Disc handling precautions
p Do not attach labels or stickers to discs (This may
cause disc warping, rendering it unusable).
p Do not write on the label side with a ball-point pen or other writing instrument.
p Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other
solvent.
p Do not use scratch-proof protectors or covers.
p Do not use the following discs:
– Discs with exposed adhesive from removed stickers or labels (rented discs etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
The model number and serial number of this product
can be found on either the back or the bottom of the unit.
Please note them in the space provided below and keep
for future reference.
MODEL NUMBER
Troubleshooting guide/Maintenance
To clean discs
SERIAL NUMBER
27
RQT8067
Limited Warranty (ONLY FOR U.S.A.)
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North
America
One Panasonic Way Secaucus,
New Jersey 07094
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
Panasonic DVD Player Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in
materials or workmanship, Panasonic Consumer Electronics
Company or Panasonic Puerto Rico, Inc. (collectively
referred to as “the warrantor”) will, for the length of the period
indicated on the chart below, which starts with the date of
original purchase (“Limited Warranty period”), at its option
either (a) repair your product with new or refurbished parts, or
(b) replace it with a new or a refurbished product. The
decision to repair or replace will be made by the warrantor.
Limited Warranty (ONLY FOR U.S.A.)
Product or Part
Name
28
RQT8067
Parts
Labor
DVD Player
One (1) Year
Ninety (90)
Days
Rechargeable
Batteries
(in exchange for
defective item)
Ten (10) Days
Not Applicable
During the “Labor” Limited Warranty period there will be
no charge for labor. During the “Parts” warranty period,
there will be no charge for parts. You must mail-in your
product during the warranty period. If non-rechargeable
batteries are included, they are not warranted. This
Limited Warranty only applies to products purchased and
serviced in the United States or Puerto Rico. This
Limited Warranty is extended only to the original
purchaser and only covers product purchased as new. A
purchase receipt or other proof of original purchase date
is required for Limited Warranty service.
Mail-In Service
For assistance in the continental U.S.A. in obtaining
repairs please ship the product to:
Panasonic Services Company
Customer Servicenter
Suite B
4900 George McVay Drive
McAllen, TX 78503
For assistance in Puerto Rico call Panasonic Puerto
Rico, Inc. (787)-750-4300 or fax (787)-768-2910.
When shipping the unit carefully pack and send it
prepaid, adequately insured and preferably in the original
carton. Include a letter detailing the complaint and
provide a day time phone and/or email address where
you can be reached.
IF REPAIR IS NEEDED DURING THE LIMITED
WARRANTY PERIOD THE PURCHASER WILL BE
REQUIRED TO FURNISH A SALES RECEIPT/PROOF
OF PURCHASE INDICATING DATE OF PURCHASE,
AMOUNT PAID AND PLACE OF PURCHASE.
CUSTOMER WILL BE CHARGED FOR THE REPAIR
OF ANY UNIT RECEIVED WITHOUT SUCH PROOF
OF PURCHASE.
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to
defects in materials or workmanship, and DOES NOT
COVER normal wear and tear or cosmetic damage. The
Limited Warranty ALSO DOES NOT COVER damages
which occurred in shipment, or failures which are caused by
products not supplied by the warrantor, or failures which
result from accidents, misuse, abuse, neglect, mishandling,
misapplication, alteration, faulty installation, set-up
adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage,
modification, or commercial use (such as hotel, office,
restaurant, or other business), rental use of the product, or
service by anyone other than a Factory Servicenter or other
Authorized Servicer, or damage that is attributable to acts of
God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS
LISTED UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT, OR ARISING OUT OF
ANY BREACH OF THIS WARRANTY. (As examples, this
excludes damages for lost time, cost of having someone
remove or re-install an installed unit if applicable, travel to
and from the servicer, loss of or damage to media or
images, data or other recorded content. The items listed
are not exclusive, but are for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD
OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of
incidental or consequential damages, or limitations on
how long an implied Limited Warranty lasts, so the
exclusions may not apply to you.
This Limited Warranty gives you specific legal rights and
you may also have other rights which vary from state to
state. If a problem with this product develops during or
after the Limited Warranty period, you may contact your
dealer or Servicenter. If the problem is not handled to your
satisfaction, then write to the warrantor’s Consumer Affairs
Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED
BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY.
Customer Services Directory
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter;
purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our
Web Site at:
http://www.panasonic.com/consumersupport
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our
Web Site at:
http://www.pasc.panasonic.com
or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday – Friday 9 am to 8 pm, EST.)
Panasonic Services Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
For hearing or speech impaired TTY users, TTY : 1-866-605-1277
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Phone (787)750-4300, Fax (787)768-2910
F1104
Product Service
1. Damage requiring service—The unit should be serviced by qualified service personnel if:
(a) The AC power supply cord or AC adaptor has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
3. Replacement parts—When parts need replacing ensure the servicer uses parts specified by the
manufacturer or parts that have the same characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to perform safety checks to confirm that
the unit is in proper working condition.
Product information
For product information or assistance with product operation:
In the U.S.A., refer to “Customer Services Directory” above.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the
website (www.panasonic.ca), or an authorized Servicentre closest to you.
Limited Warranty (ONLY FOR U.S.A.)/Product Service
Service in Puerto Rico
29
RQT8067
Limited Warranty (ONLY FOR CANADA)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC/TECHNICS PRODUCT—LIMITED
WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to
remedy any such defect, or at its option, replace the product for a period as stated below from the date of original
purchase.
Technics Audio Product
Panasonic Audio & DVD Product
Accessories including rechargeable batteries
One (1) year, parts and labour
One (1) year, parts and labour
Ninety (90) days
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to any product which has been improperly
installed, subjected to usage for which the product was not designed, misused or abused, damaged during shipping, or
which has been altered or repaired in any way that affects the reliability or detracts from the performance, nor does it
cover any product which is used commercially. Dry cell batteries are also excluded from coverage under this warranty.
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original
purchase is required before warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages,
or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable.
Limited Warranty (ONLY FOR CANADA)
WARRANTY SERVICE
For product operation and information assistance, please contact your Dealer or our Customer Care Centre
at: Telephone #: (905) 624-5505 Fax #: (905) 238-2360 Web: www.panasonic.ca
30
RQT8067
For product repairs, please contact one of the following:
pYour Dealer who will inform you of an authorized Servicentre nearest you.
pOur Customer Care Centre at (905) 624-5505 or www.panasonic.ca
pA Panasonic Factory Servicentre listed below:
Richmond,
British Columbia
Panasonic Canada Inc.
12111 Riverside Way
Richmond, BC
V6W 1K8
Tel: (604) 278-4211
Fax: (604) 278-5627
Calgary, Alberta
Mississauga, Ontario
Lachine, Québec
Panasonic Canada Inc.
6835-8th St. N. E.
Calgary, AB
T2E 7H7
Tel: (403) 295-3955
Fax: (403) 274-5493
Panasonic Canada Inc.
5770 Ambler Dr.
Mississauga, ON
L4W 2T3
Tel: (905) 624-8447
Fax: (905) 238-2418
Panasonic Canada Inc.
3075, rue Louis A. Amos
Lachine, QC
H8T 1C4
Tel: (514) 633-8684
Fax: (514) 633-8020
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS 2.0 KDigital Out” are trademarks of Digital Theater Systems, lnc.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited
viewing uses only.
This product incorporates copyright protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia.
HighMAT™ and the HighMAT logo are either trademarks or registered
trademarks of Microsoft Corporation in the United States and/or other
countries.
Windows Media, and the Windows logo are trademarks, or registered
trademarks of Microsoft Corporation in the United States and/or other
countries.
WMA is a compression format developed by Microsoft Corporation. It
achieves the same sound quality as MP3 with a file size that is smaller
than that of MP3.
C
IND
U
RIES
ELECTR
NI
ST
O
Listening caution
•
EST. 1924
SO
N
•A
S
CIATI
O
Do not play your headphones or earphones at a high volume. Hearing experts advise against
continuous extended play.
If you experience a ringing in your ears, reduce volume or discontinue use.
Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.
You should use extreme caution or temporarily discontinue use in potentially hazardous situations.
Even if your headphones or earphones are the open-air type designed to let you hear outside
sounds, don’t turn up the volume so high that you can’t hear what’s around you.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
p Start your volume control at a low setting.
p Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
p Leave it there.
Do not rest the unit on your lap for a long time while using it. The unit can become hot and cause burns.
To prevent damage
Avoid the following:
p Spraying flammable insecticides near the unit.
p Pressing the LCD.
p Touching the lens and other parts of the laser pickup.
Do not use the unit in the following places:
p Sandy places such as beaches.
p On top of cushions, sofas, or hot equipment such as amplifiers.
Do not leave in an unventilated automobile or exposed to direct sunlight and high temperatures.
31
RQT8067
Main feature index
To select the content to repeat (➜ page 10)
To enjoy virtual surround (➜ page 10)
To adjust the picture quality (➜ page 11)
To select how to show 4:3 aspect pictures
(➜ page 11)
Shows a disc top menu (➜ page 9)
Shows a program list (➜ page 15)
Shows On-Screen Menus (➜ page 16)
Shows a disc menu (➜ pages 9, 14)
Shows a playlist (➜ page 15)
Adjusts the volume (➜ page 8)
Shows a disc top menu (➜ page 9)
Shows a program list (➜ page 15)
SETUP
STOP
PAUSE
PLAY
VOL
Adjusts the volume (➜ page 8)
Shows a disc menu (➜ pages 9, 14)
Shows a playlist (➜ page 15)
TOP MENU
MENU
ANGLE
SUBTITLE
ENTER
AUDIO
RETURN PLAYMODE
DISPLAY
1
2
3
CANCEL
4
5
6
>
= 10
7
8
9
0
Changes angles (➜ page 11)
Still picture rotation (➜ page 11)
Changes subtitles (➜ page 11)
Changes soundtracks (➜ page 11)
program/random play (➜ page 13)
Clears an item (➜ page 13)
Shows On-Screen Menus (➜ page 16)
[U.S.A.]
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North
America
One Panasonic Way Secaucus,
New Jersey 07094
http://www.panasonic.com
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
G
[Canada]
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
www.panasonic.ca
[Others]
Matsushita Electric Industrial Co., Ltd. Corporate
Management Division for the Americas
Sales Office for North America
Tokyo Panasonic Sales Section
32nd Floor, World Trade Center 4-1,
Hamamatsu-cho, 2-Chome, Minato-Ku,
Tokyo 105-6132, Japan
2005 Matsushita Electric Industrial Co., Ltd.
Printed in China
Panasonic Marketing Europe G.M.B.H.
Wiesbaden N. (a Division of Panasonic
Marketing G.M.B.H.)
Military Sales Department
6200 Wiesbaden-Biebrich,
Hagenauerstr. 43 Germany
RQT8067-3P
F0205UM3045