Brother FAX-1960C Printer User Manual

3-865-553-12(1)
Compact Hi-Fi
Stereo System
Operating Instructions
LBT-DR8AV
LBT-DR7AV
LBT-W900AV
LBT-XB800AV
©1998 by Sony Corporation
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
This appliance is classified as
a CLASS 1 LASER product.
The CLASS 1 LASER
PRODUCT MARKING is
located on the rear exterior.
This stereo system is equipped with the Dolby* Btype noise reduction system.
* Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol a and
“PRO LOGIC” are trademarks of the Dolby
Laboratories Licensing Corporation.
2
Table of Contents
Getting Started
Sound Adjustment
Step 1: Hooking up the system ............ 4
Adjusting the sound ............................ 30
Step 2: Setting up the speakers ............ 7
Selecting the audio emphasis ............. 31
Step 3: Setting the time ......................... 9
Adjusting the audio emphasis ............ 32
Step 4: Presetting radio stations ........ 10
Making a personal audio
emphasis file ................................... 34
Saving power in standby mode* ........ 11
Basic Operations
Playing a CD ......................................... 13
Recording a CD .................................... 14
Enjoying Dolby Pro Logic Surround
sound ............................................... 35
Other Features
Listening to the radio ........................... 15
Using the Radio Data System
(RDS)** ............................................ 36
Recording from the radio .................... 17
Singing along: Karaoke ...................... 38
Playing a tape ........................................ 18
Falling asleep to music ........................ 40
Recording from a tape ......................... 20
Waking up to music ............................. 41
F
ES
Timer-recording radio programs ....... 42
P
The CD Player
Using the CD display ........................... 21
Optional AV components
Playing CD tracks repeatedly ............. 22
Connecting audio components .......... 44
Playing CD tracks in random order .. 22
Connecting video components ........... 45
Programming CD tracks ..................... 23
Connecting outdoor antennas ............ 48
Playing CDs without interruption ..... 25
Additional Information
The Tape Deck
Precautions ............................................ 49
Recording on a tape manually ........... 26
Troubleshooting ................................... 50
Recording CDs by specifying the track
order ................................................ 27
Specifications ........................................ 52
Index ........................................ Back cover
DJ Effects
Looping part of a CD ........................... 29
Flashing part of a CD ........................... 29
* For LBT-W900AV/XB800AV only
** For the European model only
3
Getting Started
Step 1: Hooking up the system
Follow steps 1 through 5 to hook up your system using the supplied cords and accessories.
AM loop antenna
FM antenna
Center speaker
Right front
speaker
Right rear speaker
The above illustration is of the LBT-DR7AV.
4
Left front
speaker
Left rear speaker
Notes
1 Connect the speakers.
1 Connecting the front speakers
Connect the speaker cords to FRONT
SPEAKER jacks.
Red/Solid (‘)
Black/Stripe (’)
• If “PUSH POWER” appears in the display when
you turn on the system, press 1/u to turn off the
system and check the speaker connections.
• Keep the speaker cords away from the antennas to
prevent noise.
• Insert only the stripped portion of the cord.
Inserting the vinyl portion will interfere with the
speaker connection and no sound will come from
the speaker.
2 Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
Except for European models
2 Connecting the center speaker
Connect the speaker cords to the
SURROUND SPEAKER CENTER
jacks.
Extend the FM wire
antenna horizontally.
AM loop antenna
FM
75
AM
R
L
REAR
CENTE
R
Black/Stripe
(’)
Red/Solid
(‘)
3 Connecting the rear speakers
Connect the speaker cords to the
SURROUND SPEAKER REAR jacks.
For European models
Extend the FM wire
antenna horizontally.
AM loop antenna
CO
A
FM XIAL
75
R
L
REAR
CENTE
AM
R
Black/Stripe
(’)
Red/Solid
(‘)
continued
5
Step 1: Hooking up the system
(continued)
Inserting two R6 (size AA)
batteries into the remote
3 If your system has a VOLTAGE
SELECTOR on the rear panel, set it
to the position of your local power
line voltage.
]
}
]
VOLTAGE SELECTOR
- 240V
230
22
0V
12
0V
Tips
4 Connect the power cord to a wall
outlet.
The demonstration appears in the
display.
If the supplied adapter on the plug does
not fit your wall outlet, detach it from
the plug (only for models equipped with
an adapter).
5 Deactivate the demonstration mode
by pressing DISPLAY (for LBTW900AV/XB800AV only) or DEMO
(STANDBY) (for other models)
while the system is off.
To attach the center speaker feet
Attach the four center speaker feet (supplied)
to the bottom corners of the center speaker.
To connect optional AV
components
See page 44.
6
}
• With normal use, the batteries should last for
about six months. When the remote no longer
operates the system, replace both batteries with
new ones.
• When you set the time, the demonstration is
deactivated.
To activate the demonstration again, press
DISPLAY (for LBT-W900AV/XB800AV only) or
DEMO (STANDBY) (for other models) while the
system is off.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
When carrying this system
Do the following to protect the CD
mechanism.
1 Press FUNCTION repeatedly until “CD”
appears in the display.
2 Hold down LOOP and press 1/u to turn
off the system.
Step 2: Setting up
the speakers
2
By connecting the supplied speakers, you can
enjoy Dolby Pro Logic Surround sound.
Dolby Pro Logic Surround is a decoding
system standardized in TV programs and
movies. Dolby Pro Logic Surround improves
the sound image by using four separate
channels. These channels manipulate the
sound to enhance the action as it happens on
the screen.
Place the center speaker so it is
placed at about the same height as
the front speakers (A). Align the
center speaker with the front
speakers or place it a little behind
the front speakers’ position (B).
A
Since the center speaker cannot produce
enough bass, the bass sound of the center
channel is output from the front speakers.
B
Center speaker
Center speaker
Front
speaker (L)
Front
speaker (R)
3
Rear
speaker
(L)
Place the rear speakers facing each
other at about 60 to 90 cm above
your listening position.
Rear
speaker
(R)
Rear speaker
60 to 90 cm
Positioning the center
and rear speakers
Before you connect them, determine the best
location for your speakers.
1
Place the front speakers at an angle
of 45 degrees from your listening
position.
Center speaker
Front
speaker
(L)
Front
speaker
(R)
45
Rear
speaker
(L)
Rear
speaker
(R)
continued
7
Step 2: Setting up the speakers
(continued)
Adjusting the speaker
volume
1
The indicator above this button lights
up.
2
To enjoy Dolby Pro Logic Surround sound,
adjust the volume of each speaker using the
test tone that the system provides.
1/u
(Power)
1
Press PRO LOGIC.
Press T. TONE on the remote.
The test tone is heard from the speakers
in the following order. Adjust the
volume of the test tone.
n Front (left) n Center
Rear N Front (right) N
VOLUME
3
From your listening position, press
CENTER LEVEL +/– and REAR
LEVEL +/– on the remote to adjust
the volume levels.
The volume levels from each speaker
should be the same.
4
Press T. TONE when you are done
adjusting.
The test tone is turned off.
Tip
If you turn VOLUME (or press VOL +/– on the
remote), all the speaker volumes change.
Note
The test tone feature works only for Dolby Pro Logic
Surround sound.
3
1
2,4
VOL +/–
8
Step 3: Setting the
time
You must set the time before using the timer
functions. The clock is on a 24-hour system
for the European and Brazilian models, and a
12-hour system for other models.
Tip
If you make a mistake, start over from step 1.
Notes
• You cannot set the time in Power Saving mode
(see page 11).
• The clock setting is canceled when you disconnect
the power cord or if a power failure occurs.
The 24-hour system model is used for
illustration purposes.
1
1
3,5 2,4
Press t/CLOCK SET.
The hour indication flashes.
2
Press TUNING +/– to set the hour.
3
Press ENTER/NEXT.
The minutes indication flashes.
4
Press TUNING +/– to set the
minutes.
5
Press ENTER/NEXT.
The clock starts.
9
Step 4: Presetting
radio stations
You can preset the following number of
stations:
2
Press TUNING MODE repeatedly
until “AUTO” appears in the
display.
3
Press TUNING +/–.
The frequency indication changes and
scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo program) appear.
— 2 band model: 20 for FM and 10 for AM
— 3 band model:
20 for FM, 10 for AM, and 5 for UKV
The bands you can select depend on the kind
of tuner built into your system. Confirm the
bands by pressing TUNER/BAND
repeatedly.
1/u
(Power)
4
2 51 3
4
Press TUNER MEMORY.
The next available preset number flashes
in the display. The stations are stored
from preset number 1.
5
Press ENTER/NEXT.
The station is stored.
6
1
Press TUNER/BAND repeatedly
until the desired band appears in
the display.
n
Each time you press this button, the
band changes as follows:
2 band model:
FM ˜ AM
3 band model:
FM n AM n UKV*
* When you select this band,
“STEREO PLUS” appears in the
display.
10
Repeat steps 1 through 5 to store
other stations.
To tune in a station with a weak
signal
Press TUNING MODE repeatedly until
“MANUAL” appears in step 2, then press
TUNING +/– to tune in a station.
To store another station on an
existing preset number
Start over from step 1. After step 4, press
TUNING +/– to select the preset number on
which you want to store the station.
You can add a new preset number after the
last preset number.
To erase a preset number
1 Press and hold TUNER MEMORY until the
preset number flashes in the display.
2 Press TUNING +/– to select the preset
number you want to erase. Select “ALL
ERASE” to erase all preset numbers.
3 Press ENTER/NEXT.
When you erase a preset number, all the
following preset numbers shift up and reduce
by one.
To change the AM tuning interval
(Except for the European and the
Middle Eastern models)
The AM tuning interval is factory-preset to 9 kHz
(10 kHz in some areas). To change the AM tuning
interval to 10 kHz (or 9 kHz), press TUNER/BAND
repeatedly until “AM” appears, then turn off the
system. While holding down ENTER, turn the
system back on. When you change the interval, the
AM preset stations will be erased. To reset the
interval, repeat the same procedure.
Saving power in
standby mode (For
LBT-W900AV/
XB800AV only)
In standby mode, you can reduce the power
consumption to a minimum (Power Saving
mode) and thus save energy.
1/u
(Power)
POWER SAVE/DEMO
(STANDBY)
DISPLAY
Note
The preset stations are canceled when you
disconnect the power cord or if a power failure
occurs for more than half a day.
/ Press POWER SAVE/DEMO
(STANDBY) while the system is
turned off.
The system switches to the Power Saving
mode and the clock display disappears.
The system is turned on/off by pressing
1/u.
To cancel the Power Saving mode
Press DISPLAY.
The clock display reappears.
continued
11
Saving power in standby mode
(continued)
Tips
• Each time you press POWER SAVE/DEMO
(STANDBY) in the Power Saving mode, the
display switches between the Power Saving mode
and the demo mode.
• The 1/u indicator and timer indicator (when the
timer is set) light up even in the Power Saving
mode.
• The timer works in the Power Saving mode.
Notes
• You cannot set the time in the Power Saving
mode.
• One Touch Play function does not work in the
Power Saving mode.
12
Basic Operations
1
Playing a CD
— Normal Play
If the disc is not placed properly, it will
not be recognized.
You can play up to five CDs in a row.
1/u
(Power)
Press PUSH OPEN and place a CD
on the disc tray.
With the label
side up.
When you play
a CD single,
place it on the
inner circle of
the tray.
VOLUME
2
Press DISC SKIP (or D.SKIP on the
remote) to place up to four more
CDs on the tray.
The disc tray rotates so you can insert
other CDs.
p
PLAY MODE
1,3
2
0/
)
Jog dial ·P
Close the front cover.
4
Press one of the DISC 1 - DISC 5
buttons.
Playback starts.
If you press ·P (or CD · on the
remote), playback starts from the CD in
the playing position.
Disc number in the playing position
Track number Elapsed time
Basic Operations
4
3
CD ·
P
AMS =/+
D.SKIP
VOL +/–
continued
13
Playing a CD (continued)
To
Do this
Stop playback Press p.
Pause
Press ·P (or P on the remote).
Press ·P again to resume
playback (or CD · on the
remote).
Recording a CD
— CD Synchro Recording
This function lets you easily record from a
CD to a tape. You can use TYPE I (normal) or
TYPE II (CrO2) tapes. The recording level is
automatically adjusted.
Select a track During playback or pause, turn
the jog dial clockwise (to go
forward) or counterclockwise (to
go backward) and release it when
you reach the desired track.
Or press AMS* + (to go
forward) or AMS = (to go
backward) on the remote.
Find a point
in a track
Press and hold ) or 0 during
playback, and release at the
desired point.
Select a CD
Press one of the DISC 1 - DISC 5
buttons (or DISC SKIP).
1/u
(Power)
DSP
7 1
ª
p
Play only the Press PLAY MODE repeatedly
CD you have until “1 DISC” appears.
selected
Play all CDs
Press PLAY MODE repeatedly
until “ALL DISCS” appears.
Remove or
change the
CDs
Press PUSH OPEN.
Adjust the
volume
Turn VOLUME (or press
VOL +/– on the remote).
6 DOLBY NR 2,3 5 4
1
* AMS: Automatic Music Sensor
Press PUSH 6 and insert a blank
tape into deck B.
Tips
• Pressing ·P while the system power is off
automatically turns on the system and starts CD
playback if there is a CD on the tray (One Touch
Play).
One Touch Play is not available in Power Saving
mode.
• You can switch from another source and begin
playing a CD just by pressing ·P, one of the
DISC 1 - DISC 5 buttons, or CD · on the remote
(Automatic Source Selection).
• If there is no CD in the player, “NO DISC”
appears in the display.
• You can change the CD which is in the loading
position during playback of the CD which is in the
playing position.
14
p
With the side you want to
record on facing forward
2
Press PUSH OPEN and place a CD.
With the label
side up.
When you play
a CD single,
place it on the
inner circle of
the tray.
3
Close the front cover.
4
Press DISC SKIP repeatedly until
the disc number you want to record
appears in the playing position
indicator.
5
Press CD SYNC.
Deck B stands by for recording, the CD
player stands by for playback, and the
indicator on the · button (for the front
side) lights up green.
6
Press DIRECTION repeatedly until
A appears to record on one side or
ß (or RELAY) to record on both
sides.
7
Press P.
Listening to the
radio
— Preset Tuning
Before using this function, preset radio
stations in the tuner’s memory (see “Step
4: Presetting radio stations” on page 10).
STEREO/MONO
1/u
(Power)
VOLUME
2
1 3
Recording starts.
Basic Operations
To stop recording
Press p on deck B or on the CD player.
Tips
• When you want to record on the reverse side,
press ª after pressing CD SYNC in step 5 so the
indicator on the ª button (for the reverse side)
lights up green.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in lowlevel, high-frequency signals, press DOLBY NR
before step 7 so “DOLBY NR B” appears in the
display.
• To record with the surround effect, press DSP so
“SUR
” appears in the display.
The equalizer settings will not be recorded.
PRESET +/–
Note
You cannot listen to other sources while recording.
VOL +/–
continued
15
Listening to the radio (continued)
1
Press TUNER/BAND repeatedly
until the desired band appears in
the display.
n
Each time you press this button, the
band changes as follows:
2 band model:
FM ˜ AM
3 band model:
FM nAMn UKV*
* When you select this band, “STEREO
PLUS” appears in the display.
2
Press TUNING MODE repeatedly
until “PRESET” appears in the
display.
n
MANUAL n AUTO n PRESET
3
Press TUNING +/– (or PRESET +/–
on the remote) to tune in the desired
preset station.
Preset number
16
Frequency
To
Do this
Turn off the radio
Press 1/u.
Adjust the volume
Turn VOLUME (or press
VOL +/– on the remote).
To listen to non-preset radio
stations
Press TUNING MODE repeatedly in step 2
until “MANUAL” appears, then press
TUNING +/– to tune in the desired station.
Tips
• Pressing TUNER/BAND while the system power
is off automatically turns on the system and tunes
in the last received station (One Touch Play).
One Touch Play is not available in Power Saving
mode.
• You can switch from another source to the radio
by pressing TUNER/BAND (Automatic Source
Selection).
• If an FM program is noisy, press STEREO/
MONO so “MONO” appears in the display. There
will be no stereo effect, but the reception will
improve. Press this button again to restore the
stereo effect.
• To improve broadcast reception, move the
supplied antennas.
Recording from the
radio
3
Press TUNING +/– to tune in the
desired preset station.
Preset number
Frequency
You can record a radio program on a tape by
tuning in a preset station. You can use TYPE I
(normal) or TYPE II (CrO2) tapes. The
recording level is automatically adjusted.
1/u
(Power)
2
DSP
1 3
4
Press PUSH 6 and insert a blank
tape into deck B.
With the side you want to
record on facing forward
Press r REC.
Deck B stands by for recording, and the
indicator on the · button (for the front
side) lights up green.
6
1
2
DOLBY NR
4
p
7 5ª
Press TUNER/BAND repeatedly
until the desired band appears in
the display.
Press TUNING MODE repeatedly
until “PRESET” appears in the
display.
6
Press DIRECTION repeatedly until
A appears to record on one side or
ß (or RELAY) to record on both
sides.
7
Press P.
Basic Operations
5
Recording starts.
To stop recording
Press p on deck B.
continued
17
Recording from the radio
(continued)
Playing a tape
Tips
• When you want to record on the reverse side,
press ª after pressing r REC in step 5 so the
indicator on the ª button (for the reverse side)
lights up green .
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, select “MANUAL”
in step 2, then press TUNING +/– to tune in the
desired station.
• When you want to reduce the hiss noise in lowlevel, high-frequency signals, press DOLBY NR
before step 7 so “DOLBY NR B” appears in the
display.
• To record with the surround effect, press DSP so
“SUR
” appears in the display.
The equalizer settings will not be recorded.
• To improve broadcast reception, move the
supplied antennas.
You can play any type of tape, TYPE I
(normal), TYPE II (CrO2), or TYPE IV (metal).
The deck automatically detects the tape type.
You can also use the AMS* functions to locate
quickly the desired songs.
To select either deck A or B, press DECK A
ª· or DECK B ª· on the remote.
* AMS: Automatic Music Sensor
1/u
(Power)
p
3
1
2 DOLBY NR 0/
)
VOLUME
p
P
0/
)
1
3
DECK A ª·
AMS =/+
DECK B ª·
VOL +/–
18
1
Press PUSH 6 and insert a recorded
tape in deck A or B.
With the side you want
to play facing forward
To search for the beginning of a
track (AMS)
Press ) to search forward or 0 to search
backward when playing the front side (or
vice-versa when playing the reverse side).
When you use the remote, AMS = or +.
The search direction, + (forward) or –
(backward), and number of songs being
skipped (1 - 9) appear in the display.
Example: searching forward 2 songs
Tips
2
Press DIRECTION repeatedly to
select A to play one side, ß* to
play both sides, or RELAY (Relay
Play)** to play both decks in
succession.
3
Press ·.
* The deck stops automatically after playing
both sides five times.
** Relay Play always plays according to the
following sequence:
Deck A front side, Deck A reverse side,
Deck B front side, Deck B reverse side.
To
Do this
Stop play
Press p.
Pause (Deck B only) Press P. Press again to
resume playback.
Fast-forward
Press ) or 0.
Rewind
Press 0 or ).
Notes
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– If completely different information is recorded on
the left and right channels.
– When there are continuous sections of extremely
low level or low frequency sound (like those of a
baritone sax).
– When the system is placed near a TV. (In this case,
we recommend moving the system farther away
from the TV or turning off the TV.)
Basic Operations
Press ª to play the reverse side. The
tape starts playing.
• Pressing · or ª while the system power is off
automatically turns on the system and starts tape
playback if there is a tape in the deck (One Touch
Play).
One Touch Play is not available in Power Saving
mode.
• You can switch from another source to the tape
deck by pressing · or ª (Automatic Source
Selection).
• You can fast-forward or rewind the tape,
regardless of the selected source.
• When you want to reduce the hiss noise in lowlevel, high-frequency signals, press DOLBY NR so
“DOLBY NR B” appears in the display.
Remove the cassette Press PUSH 6.
Adjust the volume
Turn VOLUME (or press
VOL +/– on the remote).
19
Recording from a
tape
3
Press DIRECTION repeatedly until
A appears to record on one side or
ß (or RELAY) to record on both
sides.
4
Press P.
— High-speed Dubbing
You can use TYPE I (normal) or TYPE II
(CrO2) tapes. The recording level is
automatically adjusted.
Dubbing starts.
When dubbing ends, decks A and B
automatically stop.
1/u
(Power)
To stop dubbing
Press p on deck A or B.
Tips
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• You don’t have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
Notes
• If you set DIRECTION to ß, when the tapes you
use have different lengths, the tape in each deck
reverses independently. If you select RELAY, the
tapes in both decks reverse together.
• You cannot record the surround effect.
p
1
3 1
p
4 2 1
Press PUSH 6 and insert a recorded
tape in deck A and a blank tape in
deck B.
With the side you want to
play/record on facing forward
2
Press H SPEED DUB.
Deck B stands by for recording.
20
The CD Player
In the stop mode
n Disc number (Disc title*)
n
Artist information*
n
Using the CD
display
Total number of tracks and total playing
time
n
You can check the remaining time of the
current track or that of the CD.
When a CD TEXT disc is loaded, you can
check the information stored on the disc, such
as the disc titles or artist names. When the
system detects CD TEXT discs, “CD TEXT”
appears in the display.
n
Clock display (for a few seconds)
Effect (P FILE) name or “EFFECT ON/
OFF”
* With CD TEXT discs only. When the disc
has more than 20 tracks, information
about the track numbers over 20 does not
appear.
DISPLAY
Notes
• The display may not show all the characters
depending on the disc.
• This player can only display the disc titles, track
titles and artist names from CD TEXT discs. Other
information cannot be displayed.
• If a title or name has more than 12 characters, the
first 12 characters will light up after the title or
name scrolls by in the display.
/ Press DISPLAY.
Each time you press this button during
Normal Play or in stop mode, the
display changes as follows:
During Normal Play
n Elapsed time on the current track
n
Remaining time on the current track
n
n
Remaining time on the current CD
(1 DISC mode) or “--.--” (ALL DISCS
mode)
n
Track title*
Clock display (for a few seconds)
n
Effect (P FILE) name or “EFFECT ON/
OFF”
21
Playing CD tracks
repeatedly
Playing CD tracks
in random order
— Repeat Play
— Shuffle Play
This function lets you repeat a single CD or
all CDs in Normal Play, Shuffle Play, and
Program Play.
You can play all the tracks on one or all CDs
in random order.
PLAY MODE
1
REPEAT
/ Press REPEAT repeatedly during
playback until “REPEAT” appears
in the display.
Repeat Play starts. The following table
describes the various repeat modes.
To repeat
Press
All the tracks on
the current CD
PLAY MODE repeatedly
until “1 DISC” appears in the
display.
All the tracks on
all CDs
PLAY MODE repeatedly
until “ALL DISCS” appears
in the display.
1
Press FUNCTION repeatedly until
“CD” appears in the display.
Only one track
REPEAT repeatedly while
playing the track you want to
repeat until “REPEAT 1”
appears in the display.
2
Press PLAY MODE repeatedly until
“ALL DISCS SHUFFLE” or “1 DISC
SHUFFLE” appears in the display.
DISC 1 - DISC 5
Jog dial
3
“ALL DISCS SHUFFLE” shuffles the
tracks on all the CDs in the player.
“1 DISC SHUFFLE” shuffles the tracks
on the CD in the playing position.
To cancel Repeat Play
Press REPEAT repeatedly until “REPEAT” or
“REPEAT 1” disappears from the display.
2
3
Press ·P.
All the tracks play in random order.
22
To cancel Shuffle Play
Press PLAY MODE repeatedly until “ALL
DISCS SHUFFLE,” “1 DISC SHUFFLE,” or
“PROGRAM” disappears from the display.
The tracks continue playing in their original
order.
To select the desired CD
Press one of the DISC 1 - DISC 5 buttons
during 1 Disc Shuffle Play.
Programming CD
tracks
–– Program Play
You can create a program of up to 32 tracks
from all the CDs in the order you want them
to be played.
2
Tips
• You can start Shuffle Play during Normal Play by
pressing PLAY MODE repeatedly until “ALL
DISCS SHUFFLE” or “1 DISC SHUFFLE” appears
in the display.
• To skip a track, turn the jog dial clockwise (or
press AMS + on the remote).
3,6 5
1
8
4
p
D.SKIP
CLEAR
CHECK
continued
23
Programming CD tracks
(continued)
1
Place CDs and close the front cover.
2
Press FUNCTION repeatedly until
“CD” appears in the display.
3
Press PLAY MODE repeatedly until
“PROGRAM” appears in the
display.
4
Press DISC SKIP (or D.SKIP on the
remote) to select a CD.
5
Turn the jog dial until the desired
track appears in the display.
To cancel Program Play
Press PLAY MODE repeatedly until
“PROGRAM,” “ALL DISCS SHUFFLE,” or
“1 DISC SHUFFLE” disappears from the
display.
To
Press
Check the program
CHECK on the remote
repeatedly. After the
last track, “CHECK
END” appears.
Clear the last selected
track
CLEAR on the remote
in stop mode.
Clear a specific track
CHECK on the remote
repeatedly until the
number of the track to
be cleared lights up,
then press CLEAR.
Add a track to the
program
1 Press DISC SKIP (or
D.SKIP on the remote)
to select a CD.
2 Turn the jog dial to
select a track.
3 Press PLAY MODE.
Clear the entire
program
p once in stop mode or
twice while playing.
Disc number
Track number Total playing time
Tips
6
Press PLAY MODE once.
The track is programmed. First “STEP”
and the programmed playing order
appear, then the total playing time
appears.
The last programmed track Total playing time
7
Repeat steps 4 through 6 to program
additional tracks.
Skip step 4 to select tracks from the same
disc.
8
Press ·P.
All the tracks play in the order you
selected.
24
• The program you created remains in the CD
player’s memory even after it has been played.
Press ·P to play the same program again.
• If “--.--” appears instead of the total playing time
while programming, this means:
– you have programmed a track numbered over
20, or
– the total playing time has exceeded 100 minutes.
Playing CDs
without
interruption
–– Non-Stop Play
You can play CDs without pausing between
tracks.
1
2
3
1
Press FUNCTION repeatedly until
“CD” appears in the display.
2
Press NON-STOP so the indicator
on this button lights up.
3
Press ·P.
To cancel Non-Stop Play
Press NON-STOP so the indicator on this
button goes off.
25
The Tape Deck
5
Recording on a
tape manually
Press P.
Recording starts.
6
You can record from CDs, tapes, or the radio.
For example, you can record just the desired
songs or begin recording from the middle of a
tape. The recording level is automatically
adjusted.
2
Start playing the source to be
recorded.
To
Press
Stop recording
p on deck B
Pause recording
P
Tips
• When you want to record on the reverse side,
press ª after pressing r REC in step 3 so the
indicator on the ª button (for the reverse side)
lights up green.
• When you want to reduce the hiss noise in lowlevel, high-frequency signals, press DOLBY NR
before step 5 so “DOLBY NR B” appears in the
display.
4
DOLBY NR
1
p
53
ª
1
Insert a blank tape into deck B.
2
Press FUNCTION repeatedly until
the source you want to record (e.g.,
CD) appears in the display.
3
Press r REC.
Deck B stands by for recording, and the
indicator on the · button (for the front
side) lights up green.
4
26
Press DIRECTION repeatedly until
A appears to record on one side or
ß (or RELAY) to record on both
sides.
Recording CDs by
specifying the
track order
1
Place CDs and close the front cover.
2
Insert a blank tape into deck B.
3
Press FUNCTION repeatedly until
“CD” appears in the display.
4
Press PLAY MODE repeatedly until
“PROGRAM” appears in the
display.
5
Press DISC SKIP (or D.SKIP on the
remote) to select a CD.
6
Turn the jog dial until the desired
track appears in the display.
— Program Edit
You can record tracks from all the CDs in the
order you want. When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
12 13
p
2
3 11
Disc number
Track number Total playing time
7
EDIT
4,7 1
6 5
p
Press PLAY MODE once.
The track is programmed. First “STEP”
and the programmed playing order
appear, then the total playing time
appears.
The last programmed track Total playing time
P
D.SKIP
CHECK
continued
27
Recording CDs by specifying the
track order (continued)
Selecting the tape length
automatically
8
— Tape Select Edit
Repeat steps 5 through 7 to program
additional tracks to be recorded on
side A.
Skip step 5 to select tracks from the same
disc.
9
Press P on the remote to insert a
pause at the end of side A.
“P” appears in the display and the total
playing time resets to “0.00” in the
display.
You can check the most suitable tape length
for recording a CD. Note that you cannot use
Tape Select Edit for discs containing more
than 20 tracks.
/ After inserting a CD, press EDIT
once so “EDIT” flashes.
First the required tape length for the CD
in the playing position appears, then the
total playing time for sides A and B
appears.
10 Repeat steps 5 through 7 to program
the tracks to be recorded on side B.
Note
Skip step 5 to select tracks from the same
disc.
You cannot use this function when Program Play
mode has been set. After clearing the entire
program, follow the above procedure (see “Clear the
entire program” in the table on page 24).
11 Press CD SYNC.
Deck B stands by for recording, the CD
player stands by for playback, and the
indicator on the · button (for the front
side) lights up green.
12 Press DIRECTION repeatedly until
A appears to record on one side or
ß (or RELAY) to record on both
sides.
13 Press P.
Recording starts.
To stop recording
Press p on deck B or on the CD player.
To check the order
Press CHECK on the remote repeatedly. After
the last track, “CHECK END” appears.
To cancel Program Edit
Press PLAY MODE repeatedly until
“PROGRAM,” “ALL DISCS SHUFFLE,” or
“1 DISC SHUFFLE” disappears from the
display.
28
DJ Effects
Looping part of a
CD
Flashing part of a
CD
— Loop
— Flash
With the Loop function, you can repeat part
of a CD during playback. This lets you create
original recordings.
With the Flash function, you can “flash” the
CD sound during playback. This lets you
create original recordings.
LOOP
FLASH
Jog dial
/ Press and hold LOOP during
playback at the point you want to
start the Loop function, and release
to resume normal playback.
LOOP
Jog dial
/ Press and hold FLASH during
playback at the point you want to
start the Flash function, and release
to resume normal playback.
To adjust the loop length
To adjust the flash length
Turn the jog dial while holding LOOP (or
press FILE SELECT V/v while holding LOOP
on the remote) to select different loop lengths.
Turn the jog dial while holding FLASH (or
press FILE SELECT V/v while holding
FLASH on the remote) to select different flash
lengths.
To use LOOP and FLASH together
Press and hold both LOOP and FLASH at the
same time.
Note
The loop and flash length cannot be adjusted in stop
mode. Adjust the loop and flash lengths during
playback.
29
Sound Adjustment
For a powerful sound (GROOVE)
Adjusting the
sound
Press GROOVE.
You can create a more powerful sound and
listen with headphones.
GROOVE SYNC BASS
PHONES
The volume switches to power mode, the
sound effect changes, the super woofer level
changes to “HIGH,” and the indicator on the
GROOVE button lights up. Press GROOVE
again to return to the previous volume.
Note
Canceling the Groove mode cancels the equalizer
curve and super woofer level.
For the most suitable bass sound
(SYNC BASS)
Press SYNC BASS.
The bass frequencies of the music you are
listening to are measured and those areas
with heavy bass tones are effectively
reinforced. The indicator on the SYNC BASS
button flashes while measuring. Once
measured, the indicator stops flashing and
remains lit. Press SYNC BASS again to return
to the previous level.
Notes
SUPER WOOFER
MODE
To reinforce the bass from the
super woofer (SUPER WOOFER)
Press SUPER WOOFER.
Each time you press this button, the super
woofer level display changes as follows:
n
SUPER WOOFER FLAT n LOWn HIGH
To select the super woofer mode
Press MODE while the super woofer is on.
Each time you press this button, the super
woofer mode display changes as follows:
MOVIE ˜ MUSIC
30
• The super woofer mode changes to MUSIC in the
SYNC BASS (Synchronized Bass) mode.
• If you press MODE in the SYNC BASS mode, this
mode is canceled and the super woofer mode
changes to MOVIE.
• You can change the super woofer level to LOW or
HIGH in the SYNC BASS mode. However, if you
change the level to SUPER WOOFER FLAT, the
SYNC BASS mode is canceled.
To listen through the headphones
Connect the headphones to the PHONES jack.
No sound will come from the speakers.
Selecting the audio
emphasis
To cancel the audio emphasis
Press EFFECT (or FILE SELECT ON/OFF on
the remote) repeatedly so the indicator on the
EFFECT button goes off.
Music menu options
The audio emphasis menu lets you select the
sound characteristics according to the music
you are listening to.
And you can also enjoy the audio emphasis
using the Synchronized Equalizer function.
When using this function, the system
automatically switches the equalizer
according to the genre of the music.
“SUR
” appears if you select an audio
emphasis with a surround effect.
Press
To select
V/v
MENU 1
MENU 2
B/b
ROCK
POP
JAZZ
DANCE
SALSA
MOVIE
GAME
NIGHT
PARTY
RELAX
The Personal File function (see “Making a
personal audio emphasis file (Personal File)”
on page 34) lets you store your own effects.
SPECTRUM
EFFECT ANALYZER V/v/B/b SYNC EQ
Using the Synchronized
Equalizer function
You can set the audio emphasis to change
automatically according to the beat and
tempo of the music.
/ Press SYNC EQ.
The indicator on the SYNC EQ button
flashes while measuring the beat and
tempo of the source. Once measured, the
indicator stops flashing and remains lit.
SYNC EQ classifies the music source as
follows:
/ Press V/v to select MENU 1 or
MENU 2, then press B/b to select
the desired audio emphasis.
Beat Density
LO
HI
Beat Strength
SMOOTH
MEDIUM
STRONG
See the chart “Music menu options” on
this page. The audio emphasis name
appears in the display.
When using the remote, press FILE
SELECT V/v repeatedly until the
desired audio emphasis name appears.
continued
31
Selecting the audio emphasis
(continued)
To cancel the Synchronized
Equalizer function
Press SYNC EQ again so the indicator goes
off.
The Synchronized Equalizer function is
canceled also when:
– you cancel the audio emphasis
– you reselect the audio emphasis from the
music menu
– you activate the surround effect
– you adjust the graphic equalizer
Adjusting the
audio emphasis
You can adjust the audio emphasis using the
graphic equalizer and surround effect.
Adjusting the graphic
equalizer
You can adjust the sound by raising or
lowering the levels of specific frequency
ranges.
– you sing along (KARAOKE)
2
Notes
6
3,4
• The Synchronized Equalizer function does not
work in KARAOKE mode.
• P FILE MEMORY does not work in this mode.
• The name of classification are not related with the
genre of the music source.
Changing the equalizer
display
You can change the equalizer display
according to the music you are listening to.
/ Press SPECTRUM ANALYZER.
Every time you press the button, the
display changes as follows:
Image pattern ˜ Normal pattern
1
Select the desired basic audio
emphasis for your sound (see
“Selecting the audio emphasis” on
page 31).
2
Press GEQ CONTROL.
The frequency range appears and the
level value flashes in the display.
32
3
Press B/b repeatedly to select a
frequency band.
Activating the surround
effect
The Surround Menu lets you select the sound
characteristics according to the sound you are
listening to.
DSP
4
Press V/v to adjust the level.
5
Repeat steps 3 and 4 to adjust the
other frequency bands.
6
Press ENTER when finished.
Note
If you choose another audio emphasis (other than
“EFFECT OFF”), the adjusted sound effect is lost. To
retain the adjusted sound effect for future use, store
it in a personal file (see “Making a personal audio
emphasis file” on page 34).
/ Press DSP until the desired DSP
mode appears in the display.
Each time you press this button, the
menu changes as follows:
OFF: Deactivates the DSP mode.
SURROUND: Reproduces stereo sources
in surround sound.
HALL: Reproduces the acoustics of a
concert hall.
THEATER: Reproduces the acoustics of a
movie theater.
ENHANCED THEATER: Reproduces the
acoustics of a large movie theater.
Note
If you choose other sound effects, the surround
effect will be canceled. To retain the effect, store it in
a personal file (see “Making a personal audio
emphasis file” on page 34).
33
Making a personal
audio emphasis file
2
Press P FILE MEMORY.
A personal file number appears in the
display.
— Personal File
You can create personal files of audio
patterns (surround effect and graphic
equalizer) and store them in the system’s
memory. Later, you can call up an audio
pattern when playing a favorite tape, CD, or
radio program. You can create up to five
audio files. Before operation, first select the
basic audio emphasis you want for your
sound.
2 4 3
3
Press B/b to select the file number
(P FILE) where you want to store
the sound effect.
4
Press ENTER.
The adjusted sound effects are stored
under the selected file number. Any
settings previously stored at this
memory location are erased and
replaced by the new settings.
To call up the personal file
Press V/v repeatedly to display the last
selected personal file, then press B/b
repeatedly to select the desired personal file.
When using the remote, press FILE SELECT
V/v repeatedly.
1
34
Create the desired sound effect by
using the graphic equalizer and/or
surround effect (see “Adjusting the
audio emphasis” on page 32).
Enjoying Dolby Pro
Logic Surround
sound
You can enjoy the Dolby Pro Logic Surround
sound of Dolby Surround-encoded
(q) videos and TV programs.
Complete the setup and speaker adjustments
first (see “Step 2: Setting up the speakers” on
page 7).
1
1
Press PRO LOGIC so the indicator
above the PRO LOGIC button lights
up.
2
Play a program source.
To turn off the Dolby Pro Logic
Surround sound
Press PRO LOGIC so the indicator above the
PRO LOGIC button goes off.
Notes
• You cannot use the Dolby Pro Logic Surround
sound and Surround Menu functions at the same
time.
• When you record the sound, turn off the Dolby
Pro Logic Surround sound.
• The audio emphasis setting will be canceled when
you turn on the Dolby Pro Logic Surround sound.
35
Other Features
Using the Radio
Data System (RDS)
(For the European model
only)
Locating a station by
program type (PTY)
You can locate the desired station by selecting
a program type. The system tunes in that type
of program currently being broadcast from
the RDS stations stored in the tuner’s preset
memory.
What is the Radio Data
System?
1 3,5 2,4
The Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features, such as monitoring traffic, news,
or information programs and locating a station
by program type. RDS is available only on FM
stations.*
Note
RDS may not work properly if the station you are
tuned to is not transmitting the RDS signal properly
or if the signal strength is weak.
* Not all FM stations provide RDS service, nor do
they all provide the same types of services. If you
are not familiar with the RDS system, check with
your local radio stations for details on RDS services
in your area.
Receiving RDS broadcasts
1
Press PTY while listening to the
radio.
2
Press TUNING +/– to select the
desired program type. See the “List
of program types (PTY)” on the
following page.
3
Press ENTER/NEXT.
/ Select a station from the FM band.
When you tune in a station that
provides RDS services, the station
name appears in the display.
To check the RDS information
Each time you press DISPLAY, the display
changes as follows:
n Station name*
n
Frequency
n
Program type*
n
Clock display
n
Effect (P FILE) name or “EFFECT ON
(OFF)”
* If an RDS broadcast is not received, the station
name and the program type may not appear in
the display.
36
The system starts searching for the
preset RDS stations (“SEARCH” and the
selected program type appear alternately
in the display).
When the tuner receives a program, the
preset station number flashes.
4
5
Press TUNING +/– until the desired
preset station number flashes in the
display.
Press ENTER/NEXT while the
preset station number is flashing.
To stop the search while it is in
progress
Press PTY.
EASY MUSIC
Easy listening (middle of the road music).
L.CLASSICAL
Classical music, such as instrumental,
vocal, and choral works.
S.CLASSICAL
Performances of major orchestras, chamber
music, opera, etc.
OTHER MUSIC
Music, such as rhythm and blues and
reggae.
List of program types (PTY)
WEATHER
Weather information.
NONE
No program type or undefined.
FINANCE
Stock market reports and trading, etc.
NEWS
News programs.
CHILDREN
Programs for the young.
AFFAIRS
Topical programs that expand on current
news.
SOCIAL
Programs about people and the things that
affect them.
INFORMATION
Programs about consumer affairs and
medical advice.
RELIGION
Programs of religious content.
SPORT
Sports programs.
EDUCATION
Educational programs, such as “how-to”
programs and advice.
DRAMA
Radio plays and serials.
CULTURE
Programs about national or regional
culture, language, and social concerns.
SCIENCE
Programs about the natural sciences
VARIED
Programs containing celebrity interviews,
panel games, and comedy.
POP
Popular music programs.
ROCK
Rock music programs.
PHONE IN
Programs where members of the public
express their views by phone or in a public
forum.
TRAVEL
Programs about travel. Not for
announcements that are located by TP/TA.
LEISURE
Programs on recreational activities such as
gardening, fishing, cooking, etc.
JAZZ
Jazz programs.
COUNTRY
Country music programs.
NATION
Programs featuring the popular music of
the country or region.
OLDIES
Programs featuring oldies music.
FOLK
Folk music programs.
continued
37
Using the Radio Data System (RDS)
(continued)
DOCUMENTARY
Investigative features.
ALARM TEST
Test signal for emergency broadcasts.
ALARM-ALARM
Emergency broadcasts.
Singing
along: Karaoke
You can sing along with any stereo CD or
tape by turning down the singer’s voice. You
need to connect an optional microphone.
3
4 1,5 2
Note
“NO PTY” appears when the program you selected
is not currently being broadcasted.
38
1
Turn MIC LEVEL to MIN to turn
down the microphone level.
2
Connect an optional microphone to
the MIX MIC.
3
Press KARAOKE PON/MPX
repeatedly to obtain the desired
karaoke effect.
Mixing and recording
sounds
4
Each time you press this button, the
display changes as follows:
n KARAOKE PON
n
MPX R
n
MPX L
n
EFFECT OFF or audio emphasis name
“h” appears in the display when the
karaoke mode is activated.
4
5
To
Select
Reduce the singer’s
voice on a CD or tape
KARAOKE PON
Reduce the left channel
on a multiplex CD or
tape
MPX R
Reduce the right
channel on a multiplex
CD or tape
MPX L
Start playing the music and adjust
the volume.
Turn MIC LEVEL to adjust the
microphone volume.
When you are done
Turn MIC LEVEL to MIN and disconnect the
microphone from MIX MIC, then press
KARAOKE PON/MPX repeatedly until “h”
disappears from the display.
Note
With some songs, vocals may not be canceled when
you select KARAOKE PON.
p
3
4 2
1
Prepare the microphone and the
karaoke effect. Then, insert a blank
tape in deck B.
2
Press r REC.
3
Press P.
4
Press ·P to start playing the CD
(or · on deck A to start playing
the tape).
Playback starts.
Start singing along with the music.
To stop recording
Press p on deck B.
continued
39
Singing along: Karaoke
(continued)
Tips
• If acoustic feedback (howling) occurs, move the
microphone away from the speakers or change the
direction of the microphone.
• If you want to record your voice through the
microphone only, you can do so by selecting CD
as the source but not playing a CD.
• When high level sound signals are input, the
system automatically adjusts the recording level to
prevent distortion of the recorded sound signal
(Auto Level Control function).
Falling asleep to
music
— Sleep Timer
You can set the system to turn off at a preset
time, so you can fall asleep listening to music.
You can preset the remaining time in 10
minute increments.
SLEEP
Notes
• If you press EFFECT or select a sound effect, the
karaoke mode is canceled.
• The instrumental sound may be reduced as well as
the singer’s voice when the source sound was
recorded monaurally.
• The singer’s voice may not be reduced when:
— only a few instruments are playing.
— a duet is being sung.
— the source has strong echoes or chorus.
— the singer’s voice deviates from the center.
— the voice on the source is singing high soprano
or tenor notes.
/ Press SLEEP.
N
N
Each time you press this button, the
minutes display (the remaining time)
changes as follows:
AUTO n 90MIN n 80MIN n 70MIN
OFF N 10MIN ....... 50MIN N 60MIN
When you choose AUTO
The system turns off when the current CD or
tape finishes playback (up to 100 minutes).
The system turns off if you manually stop
playing a CD or tape.
To check the remaining time
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly to select the desired
time.
To cancel the Sleep Timer function
Press SLEEP repeatedly until “SLEEP OFF”
appears in the display.
40
Waking up to
music
3
— Daily Timer
4
“SET” appears and “DAILY” flashes in
the display.
You can wake up to music at a preset time
every day. Make sure you have set the clock
(see “Step 3: Setting the time” on page 9).
DAILY
Press TUNING +/– to select
“DAILY,” then press ENTER/
NEXT.
“ON” appears and the hour indication
flashes in the display.
The 24-hour system model is used for
illustration purposes.
9
Press t/CLOCK SET.
3 4,5,6,7,8
5
Set the time to start playback.
Press TUNING +/– to set the hour, then
press ENTER/NEXT.
The minutes indication flashes.
Press TUNING +/– to set the minutes,
then press ENTER/NEXT.
The hour indication flashes again.
1
Prepare the music source you want
to play.
• CD: Insert a CD. To start from a
specific track, create a program (see
“Programming CD tracks” on page
23).
• Tape: Insert a tape with the side you
want to play facing forward.
• Radio: Tune in the preset station you
want (see “Step 4: Presetting radio
stations” on page 10).
2
Turn VOLUME to adjust the
volume.
6
Set the time to stop playback
following the above procedure.
7
Press TUNING +/– until the desired
music source appears.
The indication changes as follows:
TUNER n CD PLAY n TAPE PLAY
n
2
8
Press ENTER/NEXT.
The start time, the stop time, and the
music source appear in turn before the
original display returns.
9
Turn off the system.
continued
41
Waking up to music (continued)
To check the setting
1 Press DAILY.
2 “TIMER OFF” appears in the display.
3 Press DAILY again.
To cancel the timer operation
Timer-recording
radio programs
To timer-record, you must preset the radio
station (see “Step 4: Presetting radio stations”
on page 10) and set the clock (see “Step 3:
Setting the time” on page 9) beforehand.
1 Press DAILY.
2 “TIMER OFF” appears in the display.
7
REC
2
6
3,4,5
Notes
• The system turns on 15 seconds before the preset
time.
• You cannot set the timer if the timer on and off
times are the same.
• When you set the Sleep Timer, the Daily Timer
will not turn on the system until the Sleep Timer
turns it off.
• You cannot set the Daily Timer and Timerrecording to be activated at the same time.
1
Tune in the preset radio station (see
“Listening to the radio” on page 15).
2
Press t/CLOCK SET.
“SET” appears and “DAILY” flashes in
the display.
3
Press TUNING +/– to select “REC,”
then press ENTER/NEXT.
“ON” appears and the hour indication
flashes in the display.
42
4
Set the time to start recording.
Press TUNING +/– to set the hour, then
press ENTER/NEXT.
The minutes indication flashes.
Press TUNING +/– to set the minutes,
then press ENTER/NEXT.
The hour indication flashes again.
5
Set the time to stop recording
following the above procedure.
The start time, the stop time, the
recording source, and the preset station
appear in turn before the original display
returns.
6
Insert a blank tape in deck B.
7
Turn off the system.
When recording starts, the volume level
is set to the minimum.
To check the setting
1 Press REC.
2 “TIMER OFF” appears in the display.
3 Press REC again.
To change the setting, start over from step 1
on the previous page.
To cancel the timer operation
1 Press REC.
2 “TIMER OFF” appears in the display.
Notes
• The system turns on 15 seconds before the preset
time.
• If the system is on at the preset time, the Timer
recording will not be made.
• You cannot set the timer if the timer on and off
times are the same.
• When you set the Sleep Timer, the Timerrecording will not start until the Sleep Timer turns
off the system.
• You cannot set the Daily Timer and Timerrecording to be activated at the same time.
• Recording starts from the front side.
43
Optional AV components
Connecting audio
components
Connecting a turntable
Be sure to match the color of the plugs and
the connectors. To listen to the sound from
the connected turntable, press FUNCTION
repeatedly until “PHONO” appears. Refer to
the instructions included with your turntable
for details.
Connecting an MD deck
for digital recording
You can record a CD to an MD digitally by
connecting your MD deck using an optical
cable. Refer to the instructions included with
your MD deck for details.
To the digital input of the MD deck
To the audio output of the turntable
Connecting an MD deck
for analog recording
Note
Using the turntable at high volume may cause
distortion or howling. This is often caused by the
bass sound from the speakers. The bass sound may
be picked up by the needle of the turntable, and
produce the distortion or howling. To avoid this, do
the following:
1 Keep some distance between the speakers and the
turntable.
2 Stop using the surround effect.
3 Install the speakers or the turntable on a firm and
stable surface.
4 Press SUPER WOOFER repeatedly until the
indicator on this button goes off.
44
Be sure to match the color of the plugs and
the connectors. To listen to the sound of the
connected MD deck, press FUNCTION
repeatedly until “MD” appears. Refer to the
instructions included with your MD deck for
details.
To the audio outputs To the audio inputs of
the MD deck
of the MD deck
Connecting a subwoofer
(LBT-DR8AV/W900AV
only)
You can connect an optional subwoofer.
Refer to the instructions included with your
subwoofer for details.
To the input of the subwoofer
Connecting video
components
You can connect a VCR, camcorder, or video
game to the VIDEO 1 jack on the rear panel
and/or the VIDEO2 INPUT jack on the front
panel.
You can also connect a DVD player to the
DVD INPUT jacks on the rear panel (LBTDR8AV/W900AV only).
Connecting a TV
To see the picture from the connected
components, connect the input jack of your
TV to the VIDEO OUT jack with the video
connecting cable (not supplied).
To the input jack of the TV
When using a TV
Turn on the TV and select the video input to
watch the pictures from this system.
continued
45
Connecting video components
(continued)
You can control Sony TVs using the buttons
below.
TV/
VIDEO
TV 1/u
TV CH
Connecting a VCR
Be sure to match the color of the plugs and
the connectors. To listen to the sound from
the connected VCR, press FUNCTION
repeatedly until “VIDEO 1” appears.
Refer to the instructions included with your
VCR for details.
To the audio output
of the VCR
To the video output
of the VCR
TV VOL
By pressing
You can
TV 1/u
Turn on or off the TV
TV/VIDEO
Select the input source for the TV
TV VOL
Adjust the volume of the TV
TV CH
Change the channel of the TV
Note
Depending on the TV, you may not be able to
control your TV or to use some buttons above.
Connecting a camcorder
or video game
Be sure to match the color of the plugs and
the connectors. To listen to the sound from
the connected camcorder or video game,
press FUNCTION repeatedly until
“VIDEO 2” appears.
Refer to the instructions included with each
component for details.
To the video
output of the
component
46
To the audio
output of the
component
Connecting a DVD player
(LBT-DR8AV/W900AV
only)
When your DVD player has 5.1
channel analog outputs
Be sure to match the color of the plugs and
the connectors. To listen to the sound from
the connected DVD player, press DVD 5.1CH
so the indicator above the button lights up.
When you listen to a stereo sound track from
the DVD player, press DVD 5.1CH repeatedly
so the indicator above the button goes off.
To the video output of
the DVD player
To the center
output of the
DVD player
To the front output
of the DVD player
To the woofer
output of the
DVD player
When your DVD player has stereo
analog outputs
Be sure to match the color of the plugs and
the connectors. Connect the LINE OUT
(audio) output jack of your DVD player to the
FRONT jacks of DVD INPUT with the audio
connecting cable. To listen to the sound from
the connected DVD player, press DVD 5.1CH
repeatedly so the indicator above the button
goes off. At this moment, the DVD (for 2
channel) function is selected.
Notes
• Each time you press DVD 5.1CH, the function
changes as follows:
DVD 5.1CH
˜
DVD (2 channel)
(indicator on)
(indicator off)
• You cannot enjoy the 5.1 channel surround sound
if you connect a DVD player which does not have
the 5.1 channel analog outputs.
To the rear
output of the
DVD player
DVD 5.1CH
47
Connecting
outdoor antennas
Connect an outdoor antenna to improve the
reception. Refer to the instructions of each
component.
AM antenna
Connect a 6 to 15 meter (20 to 50 feet)
insulated wire to the AM antenna terminal.
Leave the supplied AM loop antenna
connected.
Except for European models
Insulated wire (not supplied)
FM antenna
FM
Connect an optional FM outdoor antenna.
You can also use the TV antenna instead.
75
AM
Except for European models
For European models
75-ohm coaxial cable
(not supplied)
Insulated wire (not supplied)
FM
75
CO
A
FM XIAL
75
AM
For European models
AM
IEC standard socket
(not supplied)
Important
CO
A
FM XIAL
75
AM
48
If you connect an outdoor antenna, connect a
ground wire to the y terminal with the screw
clamp. To prevent a gas explosion, do not
connect the ground wire to a gas pipe.
Additional Information
Precautions
Cleaning the cabinet
Use a soft cloth slightly moistened with mild
detergent solution.
To save a tape permanently
On operating voltage
Before operating the system, check that the
operating voltage of your system is identical with
the voltage of your local power supply.
To prevent a tape from being accidentally recorded
over, break off the cassette tab from side A or B as
illustrated.
On safety
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet, even if the unit itself has been turned
off.
• Unplug the system from the wall outlet (mains) if
it is not to be used for an extended period of time.
To disconnect the cord (mains lead), pull it out by
the plug. Never pull the cord itself.
• Should any solid object or liquid fall into the
component, unplug the stereo system and have
the component checked by qualified personnel
before operating it any further.
• The AC power cord must be changed only at a
qualified service shop.
Detector slots
Tab of side B
Tab of side A
Side A
Break off the
cassette tab of
side A
On placement
• Place the stereo system in a location with adequate
ventilation to prevent heat build-up in the stereo
system.
• Do not place the system in an inclined position.
• Do not place the system in locations where it is;
— Extremely hot or cold
— Dusty or dirty
— Very humid
— Subject to vibrations
— Subject to direct sunlight
If you later want to reuse the tape for recording,
cover the broken tab with adhesive tape. However,
be careful not to cover the detector slots which allow
the tape player to automatically detect the type of
tape.
Tape type: CrO2/Metal
Normal
On operation
• If the stereo system is brought directly from a cold
to a warm location, or is placed in a very damp
room, moisture may condense on the lens inside
the CD player. Should this occur, the system will
not operate properly. Remove the CD and leave
the system turned on for about an hour until the
moisture evaporates.
• When you move the system, take out any discs.
Detector slots
If you have any questions or problems concerning
your stereo system, please consult your nearest
Sony dealer.
Notes on CDs
• Before playing, clean the CD with a cleaning cloth.
Wipe the CD from the center out.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, or anti-static
spray intended for vinyl LPs.
• Do not expose the CD to direct sunlight or heat
sources such as hot air ducts, nor leave it in a car
parked in direct sunlight.
continued
49
Precautions (continued)
Before placing a cassette in the
tape deck
Take up any slack in the tape. Otherwise the tape
may get entangled inside the tape deck and become
damaged.
When using a tape longer than 90
minutes
The tape is very elastic. Do not frequently change
the tape operations such as play, stop, and fastforwarding, etc. The tape may get entangled in the
tape deck.
Troubleshooting
If you run into any problem using this stereo
system, use the following checklist.
First, check that the power cord is connected
firmly and the speakers are connected
correctly and firmly.
Should any problem persist, consult your
nearest Sony dealer.
General
Cleaning the tape heads
Clean the tape heads after every 10 hours of use.
When the tape heads become dirty
— the sound is distorted
— there is a decrease in sound level
— the sound drops out
— the tape does not erase completely
— the tape does not record
Make sure to clean the tape heads before you start
an important recording or after playing an old tape.
Use a separately sold dry-type or wet-type cleaning
cassette. For details, refer to the instructions of the
cleaning cassette.
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of
use with a separately sold demagnetizing cassette.
For details, refer to the instructions of the
demagnetizing cassette.
The display starts flashing as soon as you
plug in the power cord even though you
haven’t turned on the system
(demonstration mode).
•Press DISPLAY (for LBT-W900AV/
XB800AV) or DEMO (STANDBY) (for
other models) while the system is off.
If the system is in the Power Saving
mode, press POWER SAVE/DEMO
(STANDBY) (for LBT-W900AV/
XB800AV).
The demonstration appears automatically
the first time you plug in the power cord,
or if there is a power outage lasting
longer than half a day.
The clock setting/radio presetting is
canceled.
•The power cord is disconnected or a
power failure occurs for more than half a
day.
Redo the following procedures:
– “Step 3: Setting the time” on page 9.
– “Step 4: Presetting radio stations” on
page 10.
To set the timer function again, also redo
“Waking up to music” on page 41 and
“Timer-recording radio programs” on
page 42.
There is no sound.
•Turn VOLUME clockwise.
•The headphones are connected.
•Insert only the stripped portion of the
speaker cord into the SPEAKER jack.
Inserting the vinyl portion of the speaker
cord will interfere with the speaker
connection.
•The volume level is automatically set to
the minimum during the Timerrecording.
50
There is no microphone sound.
•Turn VOLUME or MIC LEVEL to adjust
the microphone volume.
• Make sure the microphone is connected
to the MIX MIC jack correctly.
There is no sound from the speakers
except the center speaker.
•The source being played back is
monaural. Press PRO LOGIC to turn off
the Pro Logic mode.
There is severe hum or noise.
• A TV or VCR is placed too close to the
stereo system. Move the stereo system
away from the TV or VCR.
There is no sound from the center speaker.
•Set the CENTER LEVEL to the
appropriate level.
“0:00” (for European and Brazilian models)
or “12:00AM” (for other models) flashes in
the display.
• A power interruption occurred. Reset the
clock and timer settings.
The timer does not function.
• Set the clock correctly.
DAILY and REC do not appear when you
press t/CLOCK SET.
• Set the timer correctly.
• Set the clock.
The remote does not function.
• There is an obstacle between the remote
and the system.
• The remote is not pointing in the
direction of the system’s sensor.
• The batteries have run down. Replace the
batteries.
There is acoustic feedback.
• Decrease the volume level.
• Move the microphone away from the
speakers or change the direction of the
microphone.
The color irregularity on a TV screen
persists.
• Turn off the TV set once, then turn it on
after 15 to 30 minutes. If the color
irregularity still persists, place the
speakers farther away from the TV set.
Speakers
There is no sound and “POWER OFF”
appears in the display.
• Press 1/u to turn off the system and
check the speaker connections and
placement.
Sound comes from only one channel or the
left and right volumes are unbalanced.
• Check the speaker connections and
placement.
There is no sound from the rear speakers.
•Set the REAR LEVEL to the appropriate
level.
•The software being played back has
limited sound effects. Check the volume
with the test tone.
CD Player
The CD tray does not rotate.
•A CD is not placed properly.
A CD will not play.
•The CD is not lying flat in the disc tray.
•The CD is dirty.
•The CD is inserted label side down.
•Moisture condensation has built up.
Remove the CD and leave the system
turned on for about an hour until the
moisture evaporates.
Play does not start from the first track.
•The player is in Program or Shuffle Play
mode. Press PLAY MODE repeatedly
until “PROGRAM,” “ALL DISCS
SHUFFLE,” or “1 DISC SHUFFLE”
disappears from the display.
Tape Deck
The tape does not record.
•No tape is in the cassette holder.
•The tab has been removed from the
cassette (see page 49).
•The tape has reeled to the end.
The tape does not record nor play, or there
is a decrease in sound level.
•The heads are dirty. Clean them (see page
50).
•The record/playback heads are
magnetized. Demagnetize them (see page
50).
continued
51
Troubleshooting (continued)
The tape does not erase completely.
•The record/playback heads are
magnetized. Demagnetize them (see page
50).
There is excessive wow or flutter, or the
sound drops out.
•The capstans or pinch rollers are dirty.
Clean them (see page 50).
Noise increases or the high frequencies are
missing.
•The record/playback heads are
magnetized. Demagnetize them (see page
50).
Tuner
Severe hum or noise (“TUNED” or
“STEREO” flashes in the display).
•Adjust the antenna.
•The signal strength is too weak. Connect
an external antenna.
A stereo FM program cannot be received in
stereo.
•Press STEREO/MONO so “STEREO”
appears in the display.
If other problems not described
above occur, reset the system as
follows:
1 Unplug the power cord.
2 Plug the power cord back in.
3 Press t/CLOCK SET, ENTER, and
1/u at the same time.
The system is reset to the factory settings. All
the settings you made, such as the preset
stations, clock, and timer are cleared. You
should set them again.
52
Specifications
Amplifier section
LBT-W900AV
Front Speaker:
Continuous RMS power output (Reference)
100 + 100 watts
(8 ohms at 1 kHz, 10%
THD)
Total harmonics distortion
Less than 0.07%
(8 ohms at 1 kHz, 50 W)
Center Speaker:
Continuous RMS power output (Reference)
45 watts
(8 ohms at 1 kHz, 10%
THD)
Rear Speaker:
Continuous RMS power output (Reference)
40 + 40 watts
(8 ohms at 1 kHz, 10%
THD)
LBT-XB800AV
Front Speaker:
DIN power output (Rated)
90 + 90 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
120 + 120 watts
(8 ohms at 1 kHz, 10%
THD)
Music power output (Reference)
200 + 200 watts
(8 ohms at 1 kHz, 10%
THD)
Center Speaker:
DIN power output (Rated)
30 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
40 watts
(8 ohms at 1 kHz, 10%
THD)
Music power output (Reference)
60 watts
(8 ohms at 1 kHz, 10%
THD)
Rear Speaker:
DIN power output (Rated)
15 + 15 watts
(16 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
20 + 20 watts
(16 ohms at 1 kHz, 10%
THD)
Music power output (Reference)
30 + 30 watts
(16 ohms at 1 kHz, 10%
THD)
LBT-DR8AV
Front Speaker:
The following measured at AC 120/220/240 V,
50 Hz
DIN power output (Rated)
130 + 130 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
160 + 160 watts
(6 ohms at 1 kHz, 10%
THD)
Center Speaker:
DIN power output (Rated)
30 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
40 watts
(8 ohms at 1 kHz, 10%
THD)
Rear Speaker:
DIN power output (Rated)
30 + 30 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
40 + 40 watts
(8 ohms at 1 kHz, 10%
THD)
LBT-DR7AV
Front Speaker:
The following measured at AC 120/220/240 V,
50 Hz
DIN power output (Rated)
110 + 110 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
140 + 140 watts
(6 ohms at 1 kHz, 10%
THD)
Center Speaker:
DIN power output (Rated)
30 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
40 watts
(8 ohms at 1 kHz, 10%
THD)
Rear Speaker:
DIN power output (Rated)
15 + 15 watts
(16 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
20 + 20 watts
(16 ohms at 1 kHz, 10%
THD)
Inputs
PHONO IN (phono jacks):sensitivity 3 mV,
impedance 47 kilohms
MIX MIC (phone jack):
sensitivity 1 mV,
impedance 10 kilohms
VIDEO1 IN (phono jacks): sensitivity 250 mV,
impedance 47 kilohms
VIDEO2 IN (phono jacks): sensitivity 250 mV,
impedance 47 kilohms
MD IN (phono jacks):
sensitivity 450 mV,
impedance 47 kilohms
(LBT-DR8AV/W900AV)
DVD IN (phono jacks):
sensitivity 450 mV,
impedance 47 kilohms
Outputs
PHONES (stereo phone jack):
accepts headphones of 8
ohms or more
VIDEO OUT (phono jack):
voltage 250 mV,
impedance 1 kilohm
MD OUT (phono jacks): voltage 250 mV,
impedance 1 kilohm
(LBT-DR8AV/W900AV)
WOOFER OUT (phono jack):
voltage 1 V, impedance
1 kilohm
FRONT SPEAKER:
(LBT-W900AV/XB800AV)accepts impedance of 8 to
16 ohms
(LBT-DR8AV/DR7AV) accepts impedance of 6 to
16 ohms
CENTER SPEAKER:
accepts impedance of 8 to
16 ohms
REAR SPEAKER:
(LBT-DR8AV/W900AV) accepts impedance of 8 to
16 ohms
(LBT-DR7AV/XB800AV) impedance 16 ohms
Video section
Inputs
VIDEO1 IN (phono jacks): 1 V p-p, 75 ohms
VIDEO2 IN (phono jacks): 1 V p-p, 75 ohms
Output
VIDEO OUT (phono jack):1 V p-p, 75 ohms
CD player section
System
Laser
Laser output
Compact disc and digital
audio system
Semiconductor laser
(λ = 780 nm)
Emission
duration: continuous
Max. 44.6 µW*
* This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
780 – 790 nm
2 Hz – 20 kHz (±0.5 dB)
More than 90 dB
More than 90 dB
Wavelength
Frequency response
Signal-to-noise ratio
Dynamic range
CD DIGITAL OUT
(square optical connector jack, rear panel)
Wave length:
660 nm
Output level:
–18 dBm
continued
53
Specifications (continued)
Tape player section
Recording system
4-track 2-channel stereo
Frequency response (DOLBY NR OFF)
40 – 13,000 Hz ( ±3 dB),
using a Sony TYPE I
cassette
40 – 14,000 Hz ( ±3 dB),
using a Sony TYPE II
cassette
Wow and flutter
±0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
(2 band model)
North American model:
Other models:
(3 band model)
FM:
UKV:
Antenna
Antenna terminals
Intermediate frequency
AM tuner section
Tuning range
North American model:
European model:
Middle Eastern model:
Other models:
Antenna
Intermediate frequency
54
87.5 – 108.0 MHz
(100 kHz step)
87.5 – 108.0 MHz
(50 kHz step)
87.5 – 108.0 MHz (50 kHz
step)
65.0 – 74.0 MHz (10 kHz
step) STEREO PLUS
FM wire antenna
75 ohm unbalanced
10.7 MHz
530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 – 1,710 kHz
(with the tuning interval
set at 9 kHz)
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
AM loop antenna,
External antenna
terminals
450 kHz
Speakers
Front speaker:
SS-DR8AV/XB800AV for LBT-DR8AV/XB800AV
Speaker system
4-way, 4-unit, bass-reflex
type, magnetically
shielded type
Speaker units
Super Woofer:
20 cm dia., cone type
Woofer:
20 cm dia., cone type
Low Tweeter:
6 cm dia., cone type
High Tweeter:
6 cm dia., cone type
Rated impedance:
(SS-DR8AV)
6 ohms
(SS-XB800AV)
8 ohms
Dimensions (w/h/d)
Approx. 290 × 595 × 445
mm (11 1/2 × 23 1/2 ×
17 5/8 in)
Mass
Approx. 16 kg (35 lb 8oz.)
net per speaker
SS-DR7AV/W900AV for LBT-DR7AV/W900AV
Speaker system
3-way, 3-unit, bass-reflex
type, magnetically
shielded type
Speaker units
Super Woofer:
17 cm dia., cone type
Woofer:
17 cm dia., cone type
Tweeter:
6 cm dia., cone type
Rated impedance:
(SS-DR7AV)
6 ohms
(SS-W900AV)
8 ohms
Dimensions (w/h/d)
Approx. 255 × 505 × 315
mm (10 1/8 × 20 ×
12 1/2 in)
Mass
Approx. 9 kg (20 lb)
net per speaker
Center speaker:
SS-CN99
Speaker system
Full-range, bass-reflex
type, magnetically
shielded type
Speaker units
Full range
10 cm dia., cone type
Rated impedance
8 ohms
Dimensions (w/h/d)
Approx. 360 × 130 × 170
mm (14 1/4 × 5 1/8 ×
6 3/4 in)
Mass
Approx. 2 kg (4 lb 8 oz.)
Rear speaker:
SS-SR99 for LBT-DR7AV/XB800AV
Speaker system
Full-range, bass-reflex
type
Speaker units
Full range
10 cm dia., cone type
Rated impedance
16 ohms
Dimensions (w/h/d)
Approx. 180 × 130 × 170
mm (7 1/8 × 5 1/8 ×
6 3/4 in)
Mass
Approx. 1.5 kg (3 lb 5 oz.)
net per speaker
SS-SR99D for LBT-DR8AV/W900AV
Speaker system
Full-range, bass-reflex
type
Speaker units
Full range
10 cm dia., cone type
Rated impedance
8 ohms
Dimensions (w/h/d)
Approx. 180 × 130 × 170
mm (7 1/8 × 5 1/8 ×
6 3/4 in)
Mass
Approx. 1.5 kg (3 lb 5 oz.)
General
Power requirements
North American model:
European model:
Mexican model:
Australian model:
Other models:
Power consumption
(LBT-DR8AV)
(LBT-DR7AV)
(LBT-W900AV)
(LBT-XB800AV)
Dimensions (w/h/d)
Mass
(LBT-DR8AV)
(LBT-DR7AV)
(LBT-W900AV)
(LBT-XB800AV)
Supplied accessories
120 V AC , 60 Hz
230 V AC, 50/60 Hz
120 V AC , 50/60 Hz
230 – 240 V AC, 50/60 Hz
120 V, 220 V, or 230 –
240 V AC, 50/60 Hz
Adjustable with voltage
selector
260 watts
205 watts
190 watts
175 watts
Approx. 356 × 423 × 446
mm (141/8 × 16 3/4 ×
17 5/8 in) incl. projecting
parts and controls
Approx. 15.0 kg (33 lb 2
oz.)
Approx. 14.5 kg (32 lb)
Approx. 13.5 kg (29 lb 13
oz.)
Approx. 14.0 kg (30 lb 14
oz.)
AM loop antenna (1)
Remote RM-SR11AV (1)
R6 (size AA) batteries (2)
FM wire antenna (1)
Speaker cords (2)
Design and specifications are subject to change
without notice.
55
K
Index
A
Adjusting
the audio emphasis 32
the sound 30
the volume 14, 16, 19
AMS 14, 18
Antennas 5, 48
Audio emphasis 31, 32
Automatic Source Selection
14, 16, 19
B
Batteries 6
L
Loop 29
M
Microphone
mixing 39
Mixing sound 39
Radio stations
presetting 10
tuning in 15
RDS* 36
Recording
a CD 14
a radio program 17
another tape 20
CDs by specifying the
track order 27
on a tape manually 26
selecting tape length
automatically 28
timer-recording 42
Repeat Play 22
Resetting the system 52
N
Normal Play 13
Non-Stop Play 25
C
CD player 13, 21
CD Synchro Recording 14
Clock setting 9
Connecting. See Hooking up
O
One Touch Play 14, 16, 19
P,Q
D, E
Daily timer 41
Display 21, 32
Dolby Pro Logic Surround 35
DSP 33
Dubbing 20
DVD 47
F, G
Flash 29
H, I, J
Hooking up
optional components 44
speakers 5
the antennas 5, 48
the power 6
the system 4
56Sony Corporation
Karaoke 38
to reduce the vocals
(KARAOKE PON) 39
to sing along with a
multiplex CD or tape
(MPX R/MPX L) 39
R
Printed in Thailand
Personal File 34
Playing
a CD 13
a preset radio station 15
a tape 18
tracks in random order
(Shuffle Play) 22
tracks in the desired
order (Program Play) 23
tracks repeatedly (Repeat
Play) 22
without interruption 25
Presetting radio stations 10
Preset tuning 15
Program Edit 27
Program Play 23
Protecting recordings 49
PTY* 36
S
Saving power 11
Saving recordings 49
Setting the time 9
Shuffle Play 22
Sleep Timer 40
Sound adjustment 30
Speakers 5, 7
Surround effect 33
Surround menu 33
SYNC BASS 30
SYNC EQ 31
T, U, V, W, X, Y, Z
Tape Select Edit 28
Test tone 8
Timer
falling asleep to music 40
timer-recording 42
waking up to music 41
Troubleshooting 50
Tuner 10, 15, 17
Tuning interval 11
Turntable 44
* For the European model
only