Brother MFC-5460CN All in One Printer User Manual

USER’S GUIDE
MFC-5460CN
MFC-5860CN
If you need to call Customer Service
Please complete the following information for future
reference:
Model Number: MFC-5460CN and MFC-5860CN
(Circle your model number)
Serial Number: 1
Date of Purchase:
Place of Purchase:
1
The serial number is on the back of the unit. Retain
this User's Guide with your sales receipt as a
permanent record of your purchase, in the event of
theft, fire or warranty service.
Register your product on-line at
http://www.brother.com/registration/
By registering your product with Brother, you will be recorded as the
original owner of the product. Your registration with Brother:
„ may serve as confirmation of the purchase date of your product
should you lose your receipt;
„ may support an insurance claim by you in the event of product loss
covered by insurance; and,
„ will help us notify you of enhancements to your product and special
offers.
The most convenient and efficient way to register your new product is
on-line at http://www.brother.com/registration/
© 2006 Brother Industries, Ltd.
Brother numbers
IMPORTANT
For technical help, you must call the country where you bought the machine. Calls must be
made from within that country.
Register your product
By registering your product with Brother International Corporation, you will be recorded as the
original owner of the product. Your registration with Brother:
„ may serve as confirmation of the purchase date of your product should you lose your receipt;
„ may support an insurance claim by you in the event of product loss covered by insurance; and,
„ will help us notify you of enhancements to your product and special offers.
Please complete and fax the Brother Warranty Registration And Test Sheet or, for your
convenience and most efficient way to register your new product, register on-line at
http://www.brother.com/registration/
FAQs (frequently asked questions)
The Brother Solutions Center is our one-stop resource for all your Fax Machine/Multi-Function
Center needs. You can download the latest software documents and utilities, read FAQs and
troubleshooting tips, and learn how to get the most from your Brother product.
http://solutions.brother.com
Note
• You can check here for Brother driver updates.
• To keep your machine performance up to date, check here for the latest firmware upgrade (for
Windows® only).
For Customer Service
In USA:
1-800-284-4329 (voice)
1-901-379-1215 (fax)
1-800-284-3238 (TTY service for the hearing-impaired)
In Canada:
1-877-BROTHER (voice)
(514) 685-4898 (fax)
i
Service Center Locator (USA only)
For the location of a Brother authorized service center, call 1-800-284-4357.
Service Center Locations (Canada only)
For the location of a Brother authorized service center, call 1-877-BROTHER.
Brother fax back system (USA only)
Brother has installed an easy-to-use fax back system, so you can get instant answers to common
technical questions and product information for all Brother products. This system is available 24
hours a day, 7 days a week. You can use the system to receive faxed instructions and an Index
of fax back subjects.
In USA only:
ii
1-800-521-2846
Ordering accessories and supplies
For best quality results use only genuine Brother accessories, which are available at most Brother
retailers. If you cannot find the accessory you need and you have a Visa, MasterCard, Discover,
or American Express credit card, you can order accessories directly from Brother. (In the USA,
you can visit us online for a complete selection of the Brother accessories and supplies that are
available for purchase.)
In USA:
1-888-879-3232 (voice)
1-800-947-1445 (fax)
http://www.brothermall.com
In Canada:
1-877-BROTHER (voice)
Description
Item
Ink Cartridge Standard <black>
LC51BK (Prints approx. 500 pages)
Ink Cartridge High Yield <black>
LC51HY-BK (Prints approx. 900 pages)
Ink Cartridge <yellow>
LC51Y (Prints approx. 400 pages)
Ink Cartridge <cyan> (blue)
LC51C (Prints approx. 400 pages)
Ink Cartridge <magenta> (red)
LC51M (Prints approx. 400 pages)
Premium Glossy Photo Paper
(Letter size / 20 sheets)
BP61GLL 1
(4" × 6" size / 20 sheets)
BP61GLP 1
Matte Inkjet Paper
BP60ML (USA only)
(Letter size / 25 sheets)
Inkjet Plain Paper
BP60PL (USA only)
(Letter size / 250 sheets)
Telephone Line Cord
LG3077001 (USA only)
User's Guide
LP3292001 (English for USA and Canada)
LP3292002 (French For Canada)
1
Available in the USA and from November 2006 in Canada.
iii
Notice - Disclaimer of Warranties
(USA and Canada)
BROTHER'S LICENSOR(S), AND THEIR DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS
(COLLECTIVELY BROTHER'S LICENSOR) MAKE NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE SOFTWARE. BROTHER'S
LICENSOR(S) DOES NOT WARRANT, GUARANTEE OR MAKE ANY REPRESENTATIONS
REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF
ITS CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS OR OTHERWISE. THE
ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE SOFTWARE IS
ASSUMED BY YOU. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY
SOME STATES IN THE USA AND SOME PROVINCES IN CANADA. THE ABOVE EXCLUSION
MAY NOT APPLY TO YOU.
IN NO EVENT WILL BROTHER'S LICENSOR(S) BE LIABLE TO YOU FOR ANY
CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE
SOFTWARE EVEN IF BROTHER'S LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. BECAUSE SOME STATES IN THE USA AND SOME PROVINCES IN
CANADA DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY
TO YOU. IN ANY EVENT BROTHER'S LICENSOR'S LIABILITY TO YOU FOR ACTUAL
DAMAGES FROM ANY CAUSE WHATSOEVER, AND REGARDLESS OF THE FORM OF THE
ACTION (WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY OR OTHERWISE), WILL BE LIMITED TO $50.
Compilation and Publication Notice
Under the supervision of Brother Industries Ltd., this manual has been compiled and published,
covering the latest product descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without
notice.
Brother reserves the right to make changes without notice in the specifications and materials
contained herein and shall not be responsible for any damages (including consequential) caused
by reliance on the materials presented, including but not limited to typographical and other errors
relating to the publication.
iv
Brother® One Year Limited Warranty and Replacement Service
(USA only)
Who is covered:
„ This limited warranty (“warranty”) is given
only to the original end-use/retail purchaser
(referred to in this warranty as “Original
Purchaser”) of the accompanying product,
consumables and accessories (collectively
referred to in this warranty as “this
Product”).
„ If you purchased a product from someone
other than an authorized Brother reseller in
the United States or if the product was used
(including but not limited to floor models or
refurbished product), prior to your
purchase you are not the Original
Purchaser and the product that you
purchased is not covered by this warranty.
What is covered:
„ This Product includes a Machine and
Consumable and Accessory Items.
Consumable and Accessory Items include
but are not limited to print heads, toner,
drums, ink cartridges, print cartridges, refill
ribbons, therma PLUS paper, thermal
paper, and the cordless handset battery.
„ Except as otherwise provided herein,
Brother warrants that the Machine and the
accompanying
Consumable
and
Accessory Items will be free from defects in
materials and workmanship, when used
under normal conditions.
„ This warranty applies only to products
purchased and used in the United States.
For products purchased in, but used
outside, the United States, this warranty
covers only warranty service within the
United States (and does not include
shipping outside the United States).
What is the length of the Warranty Periods:
„ Machines: one year from the original
purchase date.
„ Accompanying
Consumable
and
Accessory Items: 90 days from the original
purchase date or the rated life of
consumable, whichever comes first.
What is NOT covered:
This warranty does not cover:
1 Physical damage to this Product;
2 Damage caused by improper installation,
improper or abnormal use, misuse, neglect
or accident (including but not limited to
transporting this Product without the proper
preparation and/or packaging);
3 Damage caused by another device or
software used with this Product (including
but not limited to damage resulting from
use of non Brother®-brand parts and
Consumable and Accessory Items);
4 Consumable and Accessory Items that
expired in accordance with a rated life; and,
5 Problems arising from other than defects in
materials or workmanship.
6 Normal Periodic Maintenance Items, such
as Paper Feeding Kit, Fuser and Laser
Units.
This limited warranty is VOID if this Product
has been altered or modified in any way
(including but not limited to attempted warranty
repair without authorization from Brother
and/or alteration/removal of the serial
number).
What to do if you think your Product is
eligible for warranty service:
Report your issue to either our Customer
Service Hotline at 1-800-284-4329 for Fax,
MFC and DCP and 1-800-276-7746 for
Printers, or to a Brother Authorized Service
Center within the applicable warranty
period. Supply Brother or the Brother
Authorized Service Center with a copy of your
dated bill of sale showing that this Product was
purchased within the U.S. For the name of
local Brother Authorized Service Center(s),
call 1-800-521-2846.
What Brother will ask you to do:
After contacting Brother or a Brother
Authorized Service Center, you may be
required to deliver (by hand if you prefer) or
send the Product properly packaged, freight
prepaid, to the Authorized Service Center
together with a photocopy of your bill of sale.
You are responsible for the cost of
shipping, packing product, and insurance
(if you desire). You are also responsible for
loss or damage to this Product in shipping.
What Brother will do:
If the problem reported concerning your
Machine and/or accompanying Consumable
and Accessory Items is covered by this
warranty and if you first reported the problem
to Brother or an Authorized Service Center
within the applicable warranty period, Brother
or its Authorized Service Center will repair or
replace the Machine and/or accompanying
Consumable and Accessory Items at no
charge to you for parts or labor. The decision
as to whether to repair or replace the Machine
and/or accompanying Consumable and
Accessory Items is made by Brother in its sole
v
Brother® One Year Limited Warranty and Replacement Service
(USA only)
discretion. Brother reserves the right to supply
a refurbished or remanufactured replacement
Machine and/or accompanying Consumable
and Accessory Items and use refurbished
parts provided such replacement products
conform to the manufacturer's specifications
for new product/parts. The repaired or
replacement Machine and/or accompanying
Consumable and Accessory Items will be
returned to you freight prepaid or made
available for you to pick up at a conveniently
located Authorized Service Center.
If the Machine and/or accompanying
Consumable and Accessory Items are not
covered by this warranty (either stage), you
will be charged for shipping the Machine
and/or accompanying Consumable and
Accessory Items back to you and charged for
any service and/or replacement parts/products
at Brother's then current published rates.
The foregoing are your sole (i.e., only) and
exclusive remedies under this warranty.
What happens when Brother elects to
replace your Machine:
When a replacement Machine is authorized by
Brother, and you have delivered the Machine
to an Authorized Service Center, the
Authorized Service Center will provide you
with a replacement Machine after receiving
one from Brother. If you are dealing directly
with Brother, Brother will send to you a
replacement Machine with the understanding
that you will, after receipt of the replacement
Machine, supply the required proof of
purchase information, together with the
Machine that Brother agreed to replace. You
are then expected to pack the Machine that
Brother agreed to replace in the package from
the replacement Machine and return it to
Brother using the pre-paid freight bill supplied
by Brother in accordance with the instructions
provided by Brother. Since you will be in
possession of two machines, Brother will
require that you provide a valid major credit
card number. Brother will issue a hold against
the credit card account number that you
provide until Brother receives your original
Product and determines that your original
Product is entitled to warranty coverage. Your
credit card will be charged up to the cost of a
new Product only if: (i) you do not return your
original Product to Brother within five (5)
business days; (ii) the problems with your
original Product are not covered by the limited
warranty;
(iii) the proper packaging
instructions are not followed and has caused
damage to the product; or (iv) the warranty
period on your original Product has expired or
has not been sufficiently validated with a copy
of the proof of purchase (bill of sale). The
replacement Machine you receive (even if
refurbished or remanufactured) will be
covered by the balance of the limited warranty
period remaining on the original Product, plus
an additional thirty (30) days. You will keep the
replacement Machine that is sent to you and
your original Machine shall become the
property of Brother. Retain your original
Accessory Items and a copy of the return
freight bill, signed by the courier.
Limitations:
Brother is not responsible for damage to or
loss of any equipment, media, programs or
data related to the use of this Product. Except
for that repair or replacement as described
above, Brother shall not be liable for any
direct, indirect, incidental or consequential
damages or specific relief. Because some
states do not allow the exclusion or limitation
of consequential or incidental damages, the
above limitation may not apply to you.
THIS WARRANTY IS GIVEN IN LIEU OF ALL
OTHER WARRANTIES, WRITTEN OR
ORAL,
WHETHER
EXPRESSED
BY
AFFIRMATION, PROMISE, DESCRIPTION,
DRAWING, MODEL OR SAMPLE. ANY AND
ALL WARRANTIES OTHER THAN THIS
ONE, WHETHER EXPRESS OR IMPLIED,
INCLUDING IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY
DISCLAIMED.
„ This Limited Warranty is the only warranty
that Brother is giving for this Product. It is
the final expression and the exclusive and
only statement of Brother's obligations to
you. It replaces all other agreements and
understandings that you may have with
Brother or its representatives.
„ This warranty gives you certain rights and
you may also have other rights that may
vary from state to state.
„ This Limited Warranty (and Brother's
obligation to you) may not be changed in
any way unless you and Brother sign the
same piece of paper in which we (1) refer
to this Product and your bill of sale date, (2)
describe the change to this warranty and
(3) agree to make that change.
Important:
We recommend that you keep all original
packing materials, in the event that you ship
this Product.
© 2003, 2006 Brother International Corporation
vi
BROTHER MULTIFUNCTION CENTER/FACSIMILE MACHINE
LIMITED WARRANTY (Canada only)
Pursuant to this limited warranty of 1 year from the date of purchase for labour and parts,
Brother International Corporation (Canada) Ltd. (“Brother”), or its Authorized Service
Centers, will repair this MFC/Facsimile machine free of charge if defective in material or
workmanship. This Limited Warranty does not include cleaning, consumables (including,
without limitation, print cartridges, print head, toner and drum) or damage caused by accident,
neglect, misuse or improper installation or operation, any damage caused from service,
maintenance, modifications, or tampering by anyone other than a Brother Authorized Service
Representative, or from the use of supplies or consumable items that are non-Brother
products. Operation of the MFC/Facsimile machine in excess of the specifications or with the
Serial Number or Rating Label removed shall be deemed abuse and all repairs thereafter
shall be the sole liability of the end-user/purchaser. In order to obtain warranty service, the
MFC/Facsimile machine must be delivered or shipped freight prepaid by the end
user/purchaser to a “Brother” Authorized Service Center, together with your Proof of
Purchase in the form of a Sales Receipt.
For laser products: Failure to remove the Toner Cartridge (and Toner Drum Unit on applicable
models) during shipping will cause severe damage to the MFC/Facsimile and will VOID the
Warranty. (Refer to your User's Guide for proper packaging.)
For ink-jet products: Do not remove the ink cartridges during shipping. Damage to your print
head resulting from packing without the ink cartridges will VOID your warranty. (Refer to your
User's Guide for proper packaging.)
BROTHER DISCLAIMS ALL OTHER WARRANTIES EXPRESSED OR IMPLIED
INCLUDING,
WITHOUT
LIMITATION,
ANY
IMPLIED
WARRANTIES
OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, EXCEPT TO THE
EXTENT THAT ANY WARRANTIES IMPLIED BY LAW CANNOT BE VALIDLY WAIVED.
No oral or written information, advice or representation provided by Brother, its Authorized
Service Centers, Distributors, Dealers, Agents or employees, shall create another warranty
or modify this warranty. This warranty states Brother's entire liability and your exclusive
remedy against Brother for any failure of the MFC/Facsimile machine to operate properly.
Neither Brother nor anyone else involved in the development, production, or delivery of this
MFC/Facsimile machine shall be liable for any indirect, incidental, special, consequential,
exemplary, or punitive damages, including lost profits, arising from the use of or inability to
use the product, even if advised by the end user/purchaser of the possibility of such damages.
Since some Provinces do not allow the above limitation of liability, such limitation may not
apply to you.
This Limited Warranty gives you specific legal rights and you may also have other rights
which vary from Providence to Providence.
Warranty Service is available at Brother Authorized Service Centers throughout
Canada. For Technical Support or for the name and location of your nearest
Authorized Service Center call 1-877-BROTHER.
Internet support: support@brother.ca or browse
Brother's Web Site: www.brother.com
Brother International Corporation (Canada) Ltd.
1 Rue Hôtel de Ville
Dollard-Des-Ormeaux, QC H9B 3H6
vii
Table of Contents
Section I
1
General
General Information
2
Using the documentation .......................................................................................2
Symbols and conventions used in the documentation ....................................2
Accessing the Software User’s Guide and Network User’s Guide ........................2
Viewing Documentation ...................................................................................3
Accessing Brother Support
(For Windows®) ..................................................................................................5
Control panel overview ..........................................................................................6
2
Loading documents and paper
10
Loading documents .............................................................................................10
Using the ADF ...............................................................................................10
Using the scanner glass ................................................................................11
Scannable area .............................................................................................12
Acceptable paper and other media ......................................................................12
Recommended media ...................................................................................13
Handling and using media .............................................................................13
Choosing the right media...............................................................................14
Loading paper and other media ..........................................................................16
Loading paper in paper tray#2 (MFC-5860CN only) .....................................18
Loading envelopes and post cards ................................................................19
Printable Area ................................................................................................21
3
General setup
22
On/Off key............................................................................................................22
Turning the machine off .................................................................................22
Turning the machine on .................................................................................22
On/Off setting ......................................................................................................22
Mode Timer..........................................................................................................23
Paper settings ......................................................................................................23
Paper Type ....................................................................................................23
Paper Size .....................................................................................................24
Tray use in Fax mode (MFC-5860CN only)...................................................24
Tray use in Copy mode (MFC-5860CN only) ................................................25
Volume Settings...................................................................................................25
Ring Volume ..................................................................................................25
Beeper Volume ..............................................................................................25
Speaker Volume ............................................................................................26
Automatic Daylight Savings Time ........................................................................26
LCD display .........................................................................................................26
LCD Contrast .................................................................................................26
viii
4
Security features
27
TX Lock ............................................................................................................... 27
Setting and changing the TX Lock password ................................................ 27
Turning the TX Lock on/off ............................................................................ 28
Section II Fax
5
Sending a fax
30
Entering Fax mode ..............................................................................................30
Faxing from the ADF ....................................................................................30
Faxing from the scanner glass ......................................................................30
Faxing A4 size documents from the scanner glass ....................................... 31
Color fax transmission ................................................................................... 31
Canceling a fax in progress ...........................................................................31
Broadcasting
(Black & White only) .........................................................................................31
Canceling a Broadcast in progress................................................................ 32
Additional sending operations.............................................................................. 32
Sending faxes using multiple settings ........................................................... 32
Contrast ......................................................................................................... 33
Changing Resolution ..................................................................................... 33
Dual access
(Black & White only) ..................................................................................34
Real time transmission ..................................................................................34
Overseas Mode ............................................................................................. 34
Delayed Faxing
(Black & White only) ..................................................................................35
Delayed Batch Transmission
(Black & White only) ..................................................................................35
Checking and canceling waiting jobs.............................................................35
Sending a fax manually ................................................................................. 36
Sending a fax at the end of a conversation ...................................................36
Out of Memory message ............................................................................... 36
ix
6
Receiving a Fax
37
Receive modes ....................................................................................................37
Choosing the Receive Mode .........................................................................37
Using receive modes ...........................................................................................38
Fax only .........................................................................................................38
Fax/Tel...........................................................................................................38
Manual ...........................................................................................................38
External TAD .................................................................................................38
Receive mode settings ........................................................................................38
Ring Delay .....................................................................................................38
F/T Ring Time
(Fax/Tel mode only)...................................................................................39
Easy Receive.................................................................................................39
Additional receiving operations ............................................................................40
Printing a reduced incoming fax ....................................................................40
Receiving a fax at the end of a conversation.................................................40
Printing a fax from the memory .....................................................................40
7
Telephone Services and External devices
41
Voice Operations .................................................................................................41
Tone or pulse
(Canada only) ............................................................................................41
Fax/Tel mode when the power key is on .......................................................41
Fax/Tel mode when the power key is off .......................................................41
Telephone services..............................................................................................42
Distinctive Ring ..............................................................................................42
Caller ID.........................................................................................................44
Connecting an external TAD (telephone answering device)................................45
Connections...................................................................................................45
Recording an outgoing message (OGM) on an external TAD .......................46
Special line considerations ............................................................................46
Multi-line connections (PBX) .........................................................................47
External and extension phones ...........................................................................48
Connecting an external or extension telephone ............................................48
Using external and extension telephones......................................................48
If you answer a call and no one is on the line:...............................................48
Using a non-Brother cordless external telephone .........................................48
Using remote codes.......................................................................................48
x
8
Dialing and storing numbers
50
How to Dial ..........................................................................................................50
Manual dialing ............................................................................................... 50
Speed-Dialing ................................................................................................50
Search ........................................................................................................... 50
Fax Redial .....................................................................................................51
Storing numbers .................................................................................................. 51
Storing a pause ............................................................................................. 51
Storing Speed-Dial numbers .........................................................................51
Changing Speed-Dial numbers ..................................................................... 52
Setting up groups for broadcasting................................................................ 52
Dialing Access codes and credit card numbers............................................. 53
9
Remote fax options
54
Fax Forwarding.................................................................................................... 54
Paging .................................................................................................................54
Fax Storage ......................................................................................................... 55
PC Fax Receive...................................................................................................56
Changing Remote Fax Options ...........................................................................57
Turning off Remote Fax Options.......................................................................... 57
Remote Retrieval................................................................................................. 58
Setting a Remote Access Code..................................................................... 58
Using your Remote Access Code..................................................................58
Retrieving fax messages ............................................................................... 59
Changing your Fax Forwarding number ........................................................59
Remote fax commands........................................................................................ 60
10
Printing Reports
61
Fax reports........................................................................................................... 61
Transmission Verification Report................................................................... 61
Fax Journal (activity report) ...........................................................................61
Reports ................................................................................................................ 62
How to print a report ...................................................................................... 62
11
Polling
63
Polling overview...................................................................................................63
Polling receive .....................................................................................................63
Setup to receive polling ................................................................................. 63
Sequential polling .......................................................................................... 63
Polled transmit (Black & White only)....................................................................64
Set up for polled transmit............................................................................... 64
xi
Section III Copy
12
Making copies
66
How to copy .........................................................................................................66
Entering Copy mode ......................................................................................66
Making a single copy .....................................................................................66
Making multiple copies ..................................................................................66
Stop copying ..................................................................................................66
Copy keys ............................................................................................................67
Changing copy quality ...................................................................................67
Enlarging or reducing the image copied ........................................................68
Copy options..................................................................................................69
Paper options ................................................................................................72
Section IV Walk-up Photo Printing
13
PhotoCapture Center®
74
PhotoCapture Center® Operations ......................................................................74
Printing from a media card without a PC .......................................................74
Scanning to a media card without a PC ........................................................74
Using PhotoCapture Center ® from your computer ........................................74
Using media cards.........................................................................................74
Media card folder structure ............................................................................75
How to print from a media card............................................................................76
Printing the thumbnail index ..........................................................................76
Printing Images..............................................................................................77
DPOF printing ................................................................................................78
PhotoCapture Center® print settings ...................................................................79
Print quality ....................................................................................................79
Paper Options................................................................................................79
Adjusting Brightness, Contrast and Color......................................................79
Cropping ........................................................................................................80
Borderless printing.........................................................................................80
Scan to Card ........................................................................................................81
Changing the image quality ...........................................................................81
Changing the black & white file format ..........................................................81
Changing the color file format........................................................................82
Understanding the Error Messages .....................................................................82
xii
14
PictBridge
83
Before Using PictBridge.......................................................................................83
PictBridge requirements ................................................................................83
Using PictBridge .................................................................................................. 83
Setting your digital camera ............................................................................ 83
Printing Images.................................................................................................... 84
DPOF printing ................................................................................................84
Understanding the Error Messages ..................................................................... 84
Section V Software
15
Software and Network features
86
Section VI Appendixes
A
Safety and Legal
88
Choosing a location ............................................................................................. 88
To use the machine safely................................................................................... 89
Important safety instructions.......................................................................... 93
Standard telephone and FCC Notices (These notices are in effect on
models sold and used in the United States only.) .....................................94
Federal Communications Commission (FCC) Declaration of Conformity
(USA only) ................................................................................................. 96
Industry Canada Compliance Statement (Canada only) ............................... 96
LAN connection ............................................................................................. 97
Legal limitations for copying .......................................................................... 97
Trademarks ...................................................................................................98
xiii
B
Troubleshooting and Routine Maintenance
99
Troubleshooting ...................................................................................................99
If you are having difficulty with your machine ................................................99
Error messages ...........................................................................................105
Transferring your faxes or Fax Journal report .............................................108
Document jam .............................................................................................109
Printer jam or paper jam ..............................................................................110
Dial Tone ....................................................................................................112
Phone line interference................................................................................112
Routine maintenance .........................................................................................113
Replacing the ink cartridges ........................................................................113
Cleaning the outside of the machine ...........................................................115
Cleaning the scanner...................................................................................116
Cleaning the machine printer platen ............................................................116
Cleaning the paper pick-up roller.................................................................117
Cleaning the print head ...............................................................................117
Checking the print quality ............................................................................118
Checking the printing alignment ..................................................................119
Checking the ink volume .............................................................................119
Machine Information ..........................................................................................120
Checking the serial number .........................................................................120
Packing and shipping the machine ....................................................................120
C
Menu and Features
122
On-screen programming ....................................................................................122
Menu table ...................................................................................................122
Memory storage...........................................................................................122
Menu keys .........................................................................................................122
Menu Table........................................................................................................124
Entering Text .....................................................................................................132
D
Specifications
133
General ..............................................................................................................133
Print media.........................................................................................................135
Fax.....................................................................................................................136
Copy ..................................................................................................................137
PhotoCapture Center® .......................................................................................138
PictBridge ..........................................................................................................138
Scanner .............................................................................................................139
Printer ................................................................................................................140
Interfaces ...........................................................................................................140
Computer requirements .....................................................................................141
Consumable items .............................................................................................142
Network (LAN) ...................................................................................................143
E
Glossary
144
F
Index
147
xiv
Section I
General
General Information
Loading documents and paper
General setup
Security features
I
2
10
22
27
1
General Information
Using the
documentation
1
Thank you for buying a Brother machine!
Reading the documentation will help you
make the most of your machine.
Symbols and conventions
used in the documentation
The following symbols and conventions are
used throughout the documentation.
Bold
Bold typeface identifies specific
keys on the machine’s control
panel.
Italics
Italicized typeface emphasizes
an important point or refers you
to a related topic.
Courier
New
Text in the Courier New font
identifies messages on the
LCD of the machine.
Warnings tell you what to do to
prevent possible personal injury.
Electrical Hazard icons alert you to
possible electrical shock.
Hot Surface icons warn you not to
touch machine parts that are hot.
Cautions specify procedures you
must follow or avoid to prevent
possible damage to the machine or
other objects.
Notes tell you how you should
respond to a situation that may arise
or give tips about how the operation
works with other features.
Improper Setup icons alert you to
devices and operations that are not
compatible with the machine.
2
1
Accessing the
Software User’s Guide
and Network User’s
Guide
This User’s Guide does not contain all the
information about the machine such as how
to use Printer, Scanner, and PC Fax. When
you are ready to learn detailed information
about these operations, read the User’s
Guide and Network User’s Guide that are on
the CD-ROM.
1
1
General Information
Viewing Documentation
Viewing Documentation
(For Windows®)
To view the documentation, from the Start
menu, point to Brother, MFC-XXXX (where
XXXX is your model name) from the
programs group, and then choose
User’s Guide.
If you have not installed the software, you can
find the documentation by following the
instructions below:
a
Turn on your PC. Insert the Brother
CD-ROM into your CD-ROM drive.
b
If the model name screen appears, click
your model name.
c
If the language screen appears, click
your language. The CD-ROM main
menu will appear.
1
How to find Scanning instructions
1
There are several ways you can scan
documents. You can find the instructions as
follows:
1
1
Software User’s Guide
„ Scanning
(For Windows® 98/98SE/Me/2000
Professional and Windows® XP)
„ ControlCenter3
(For Windows® 98/98SE/Me/2000
Professional and Windows® XP)
„ Network Scanning
PaperPort® SE with OCR User’s Guide
„ The complete ScanSoft® Paper Port® SE
with OCR User’s Guide can be viewed
from the Help selection in the ScanSoft®
Paper Port® SE with OCR application.
Note
If this window does not appear, use
Windows® Explorer to run the setup.exe
program from the root directory of the
Brother CD-ROM.
d
Click User’s Guide to view the
Software User’s Guide and Network
User’s Guide in HTML format.
3
Chapter 1
Viewing Documentation
(For Macintosh®)
a
How to find Scanning instructions
1
Turn on your Macintosh®. Insert the
Brother CD-ROM into your CD-ROM
drive. The following window will appear.
There are several ways you can scan
documents. You can find the instructions as
follows:
Software User’s Guide
„ Scanning
(For Mac OS® X 10.2.4 or greater)
„ ControlCenter2
(For Mac OS® X 10.2.4 or greater)
„ Network Scanning
(For Mac OS® X 10.2.4 or greater)
Presto!® PageManager® User’s Guide
b
c
d
Double-click the Documentation icon.
e
Click the documentation you want to
read.
Double-click your language folder.
Double-click the top page file to view the
Software User’s Guide and Network
User’s Guide in HTML format.
„ Software User's Guide
„ Network User's Guide
4
„ The complete Presto!® PageManager®
User’s Guide can be viewed from the Help
selection in the Presto!® PageManager®
application.
1
General Information
Accessing Brother
Support
(For Windows®)
1
1
You can find all the contacts you will need,
such as Web support (Brother Solutions
Center), Customer Service and Brother
Authorized Service Centers on page i and on
the Brother CD-ROM.
„ Click Brother Support on the main menu.
The following screen will appear:
„ To access our web site (www.brother.com),
click Brother Home Page.
„ To view all Brother Numbers, including
Customer Service numbers for the USA
and Canada, click Support Information.
„ To access the USA Brother online
shopping mall (www.brothermall.com) for
additional product and services
information, click Brother Mall.com.
„ For the latest news and product support
information (http://solutions.brother.com),
click Brother Solutions Center.
„ To return to the main page, click Back or
If you have finished, click Exit.
5
Chapter 1
Control panel overview
1
MFC-5460CN
10
1
2
9
3
4
MFC-5860CN
10
1
6
2
9
3
4
General Information
1
8
9
4
5
6
8
9
4
7
5
7
6
7
Chapter 1
Note
Most of the illustrations in this User’s Guide show the MFC-5460CN.
1
„ Hook
Press before dialing if you want to make
sure a fax machine will answer, and then
press Black Start or Color Start.
Also, press this key after picking up the
handset of an external telephone during the
F/T double/pseudo-ring.
„ Redial/Pause
Redials the last number called. It also
inserts a pause when programming quick
dial number.
„ Resolution
Lets you temporarily change the resolution
when sending a fax.
2
3
4
Copy keys (Temporary settings):
„ Options
Lets you temporarily change multiple copy
settings.
„ Quality
Lets you temporarily change the quality
setting.
„ Enlarge/Reduce
Lets you temporarily enlarge or reduce
copies depending on the ratio you choose.
„ Paper Type (MFC-5460CN only)
You can choose which type of paper you
want to use for the next copy.
„ Tray Select (MFC-5860CN only)
You can choose which tray you want to use
for the next copy.
Dial Pad
Use these keys to dial telephone and fax
numbers and as a keyboard for entering
information into the machine.
(Canada only)
The # key lets you temporarily switch the
dialing mode during a telephone call from
Pulse to Tone.
Mode keys:
„
Fax
Lets you access Fax mode.
8
„
Fax keys:
Scan
Lets you access Scan mode.
„
Copy
Lets you access Copy mode.
„
Photo Capture
Lets you access PhotoCapture Center®
mode.
5
Menu keys:
„ Menu
Lets you access the Menu to program your
settings in the machine.
„ a Search/Speed Dial
Lets you look up and dial numbers that are
stored in the memory.
„ Volume keys
„
„
„
„
6
d c
In Fax mode, you can press these keys to
adjust the ring volume.
d
Press to scroll backward to a menu
selection.
a or b
Press to scroll through the menus and
options.
Clear/Back
Press to cancel the current setting.
OK
Lets you store your settings in the machine.
Start keys:
„
Color Start
Lets you start sending faxes or making
copies in full color. Also lets you start a
scanning operation (in color or black &
white, depending on the scanning setting in
the ControlCenter software).
„
Black Start
Lets you start sending faxes or making
copies in black & white. Also lets you start
a scanning operation (in color or black &
white, depending on the scanning setting in
the ControlCenter software).
General Information
7
8
On/Off
You can turn the machine on or off.
1
Stop/Exit
Stops an operation or exits from a menu.
9
LCD (liquid crystal display)
Displays messages on the screen to help you
set up and use your machine.
10 Ink
Lets you clean the print head, check the print
quality, and check the available ink volume.
9
2
Loading documents and paper
Loading documents
How to load documents
2
CAUTION
You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.
Using the ADF
DO NOT pull on the document while it is
feeding.
2
The ADF can hold up to 35 pages and feeds
each sheet individually. Use standard 20 lb
(80 g/m2) paper and always fan the pages
before putting them in the ADF.
Recommended environment
Temperature:
68 to 86° F (20 to 30° C)
Humidity:
50% to 70%
Paper:
20 lb LTR (80 g/m2 A4)
Document Sizes Supported
Length:
5.8 to14 in. (148 to 355.6 mm)
Width:
5.8 to 8.5 in.
(148 to 215.9 mm)
Weight:
17 to 24 lb (64 to 90 g/m2)
10
DO NOT use paper that is curled, wrinkled,
folded, ripped, stapled, paper clipped,
pasted or taped.
DO NOT use cardboard, newspaper or
fabric.
2
„ Make sure documents written with ink are
completely dry.
a
Unfold the ADF Document Support.
b
Fan the pages well. Make sure you put
the documents face up, top edge first
in the ADF until you feel them touch the
feed roller.
c
Adjust the paper guides to fit the width of
your documents.
2
2
2
Loading documents and paper
d
a
b
Unfold the ADF Document Output
Support Flap (1).
Lift the document cover.
Using the document guidelines on the
left, center the document face down on
the scanner glass.
2
1
CAUTION
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
Using the scanner glass
2
You can use the scanner glass to fax, copy or
scan pages of a book or one page at a time.
Document Sizes Supported
Length:
Up to 11.7 in. (297 mm)
Width:
Up to 8.5 in. (215.9 mm)
Weight:
Up to 4.4 lb (2 kg)
2
c
Close the document cover.
CAUTION
How to load documents
Note
To use the scanner glass, the ADF must
be empty.
2
If you are scanning a book or thick
document, DO NOT slam the cover or
press on it.
11
Chapter 2
Scannable area
2
The scannable area depends on the settings
in the application you are using. The figures
below show the areas you cannot scan on
paper.
3
Acceptable paper and
other media
The print quality can be affected by the type
of paper you are using in the machine.
To get the best print quality for the settings
you have chosen, always set the Paper Type
to match the type of paper you load.
4
1
You can use plain paper, inkjet paper (coated
paper), glossy paper, transparencies and
envelopes.
We recommend testing various paper types
before buying large quantities.
For best results, use Brother paper.
2
Usage
Fax
Copy
Scan
12
Document
Size
Top (1)
Left (3)
Bottom (2)
Right (4)
Letter
0.12 in.
(3 mm)
0.16 in.
(4 mm)
A4
0.12 in.
(3 mm)
0.04 in.
(1 mm)
Letter
0.12 in.
(3 mm)
0.12 in.
(3 mm)
A4
0.12 in.
(3 mm)
0.12 in.
(3 mm)
Letter
0.12 in.
(3 mm)
0.12 in.
(3 mm)
A4
0.12 in.
(3 mm)
0 in.
(0 mm)
„ When you print on inkjet paper (coated
paper), transparencies and photo paper,
be sure to choose the proper media in the
‘Basic’ tab of the printer driver or in the
Paper Type setting of the menu (See
Paper Type on page 23).
„ When you print on Brother photo paper,
load the instruction sheet included with the
photo paper in the paper tray first, and
then put the glossy paper on top of the
instruction sheet.
„ When you use transparencies or glossy
paper, remove each sheet at once to
prevent smudging or paper jams.
„ Avoid touching the printed surface of the
paper immediately after printing; the
surface may not be completely dry and
may stain your fingers.
2
Loading documents and paper
Recommended media
Improper Setup
2
To get the best print quality, we suggest using
Brother paper. (See table below.)
DO NOT use the following kinds of paper:
• Damaged, curled, wrinkled, or
irregularly shaped paper
We recommend using ‘3M Transparency
Film’ when you print on transparencies.
Brother paper
1
2
1
Paper Type
Item
Letter Plain (USA only)
BP60PL
Letter Glossy Photo
BP61GLL 1
Letter Inkjet (Matte)
(USA only)
BP60ML
4 x 6 in. Glossy Photo
BP61GLP 1
1
1
• Extremely shiny or highly textured paper
• Paper already printed on by a printer
• Paper that cannot be arranged uniformly
when stacked
Available in the USA and from November 2006 in
Canada.
Handling and using media
„ Store paper in its original packaging, and
keep it sealed. Keep the paper flat and
away from moisture, direct sunlight and
heat.
„ The coated side of photo paper is shiny.
Avoid touching the shiny (coated) side.
Load glossy paper with the shiny side
facing down.
„ Avoid touching either side of
transparencies because they absorb
water and perspiration easily, and this
may cause decreased output quality.
Transparencies designed for laser
printers/copiers may stain your next
document. Use only transparencies
recommended for inkjet printing.
0.08 in. (2 mm) or longer
• Paper made with a short grain
2
Paper capacity of the output paper
tray
2
Up to 50 sheets of 20 lb Letter or 80 g/m2 A4
paper.
„ Transparencies or glossy paper must be
picked up from the output paper tray one
page at a time to avoid smudging.
13
Chapter 2
Choosing the right media
2
Paper type and size for each operation
Paper Type
Cut Sheet
Cards
Envelopes
Paper Size
Usage
Fax
Copy
Photo
Capture
Printer
Letter
8 1/2 × 11 in. (216 × 279 mm)
Yes
Yes
Yes
Yes
A4
8.3 × 11.7 in. (210 × 297 mm)
Yes
Yes
Yes
Yes
Legal
8 1/2 × 14 in. (216 × 356 mm)
Yes
Yes
–
Yes
Executive
7 1/4 × 10 1/2 in. (184 × 267 mm) –
–
–
Yes
JIS B5
7.2 × 10.1 in. (182 × 257 mm)
–
–
–
Yes
A5
5.8 × 8.3 in. (148 × 210 mm)
–
Yes
–
Yes
A6
4.1 × 5.8 in. (105 × 148 mm)
–
–
–
Yes
Photo
4 × 6 in. (10 × 15 cm)
–
Yes
Yes
Yes
Photo 2L
5 × 7 in. (13 × 18 cm)
–
–
Yes
Yes
Index Card
5 × 8 in. (127 × 203 mm)
–
–
–
Yes
Post Card 1 3.9 × 5.8 in. (100 × 148 mm)
–
–
–
Yes
Post Card 2
(Double)
5.8 × 7.9 in. (148 × 200 mm)
–
–
–
Yes
C5
Envelope
6.4 × 9 in. (162 × 229 mm)
–
–
–
Yes
DL
Envelope
4.3 × 8.7 in. (110 × 220 mm)
–
–
–
Yes
COM-10
4 1/8 × 9 1/2 in. (105 × 241 mm)
–
–
–
Yes
Monarch
3 7/8 × 7 1/2 in. (98 × 191 mm)
–
–
–
Yes
JE4
Envelope
4.1 × 9.3 in. (105 × 235 mm)
–
–
–
Yes
8 1/2 × 11 in. (216 × 279 mm)
–
Yes
–
Yes
8.3 × 11.7 in. (210 × 297 mm)
–
Yes
–
Yes
Transparencies Letter
A4
14
2
Loading documents and paper
Paper weight, thickness and capacity
2
Paper Type
Weight
Thickness
Cut
Sheet
17 to 32 lb (64 to 120 g/m2)
0.003 to 0.006 in. (0.08 to 0.15 mm) 100 1
17 to 28 lb (64 to 105 g/m2)
0.003 to 0.006 in. (0.08 to 0.15 mm) 250 2
Inkjet Paper
17 to 53 lb (64 to 200 g/m2)
0.003 to 0.01 in. (0.08 to 0.25 mm)
Glossy Paper
Up to 58 lb (Up to 220 g/m2) Up to 0.01 in. (Up to 0.25 mm)
20
Photo
Up to 64 lb (Up to 240 g/m2) Up to 0.01 in. (Up to 0.28 mm)
20
Index Card
Up to 32 lb (Up to 120 g/m2) Up to 0.006 in. (Up to 0.15 mm)
30
Post Card
Up to 53 lb (Up to 200 g/m2) Up to 0.01 in. (Up to 0.23 mm)
30
Plain Paper
No. of
sheets
2
(Tray #1)
(MFC-5860CN)
Plain Paper
(Tray #2)
(MFC-5860CN)
Cards
20
4" × 6"
1
Envelopes
20 to 25 lb (75 to 95 g/m2)
Up to 0.02 in. (Up to 0.52 mm)
10
Transparencies
–
–
10
Up to 50 sheets for Legal size paper 20 lb (80 g/m2).
Up to 100 sheets of 20 lb (80 g/m2)paper.
2
Up to 250 sheets of 20 lb (80 g/m2) paper.
15
Chapter 2
Loading paper and
other media
b
2
Press and slide the paper side
guides (1) and paper length guide (2) to
fit the paper size.
1
Note
• For Tray#2, see Loading paper in paper
tray#2 (MFC-5860CN only) on page 18.
• If you are using Auto Select
(MFC-5860CN only), after refilling the
paper tray you should open and close the
scanner cover to reset the machine.
a
Pull the paper tray completely out of the
machine.
If the paper support flap is open, close it
and lift the output paper tray cover (1).
2
c
Fan the stack of paper well to avoid
paper jams and misfeeds.
1
Note
Always make sure that the paper is not curled.
d
16
Gently put the paper into the paper tray
print side down and top edge first.
Check that the paper is flat in the tray.
Loading documents and paper
Note
f
Close the output paper tray cover.
When you use Legal size paper, press
and hold the universal guide release
button as you slide out the front of the
paper tray.
e
2
g
Slowly push the paper tray completely
into the machine.
h
While holding the paper tray in place,
pull out the paper support (1) until it
clicks and unfold the paper support
flap (2).
Gently adjust the paper side guides with
both hands and the paper length guide
to fit the paper.
Make sure the paper side guides touch
the sides of the paper.
2
1
Note
Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
Note
Do not use the paper support flap for
Legal paper.
17
Chapter 2
Loading paper in paper tray#2
(MFC-5860CN only)
c
2
Press and slide the paper side
guides (1) and paper length guide (2) to
fit the paper size.
Note
You can only use plain paper sizes Letter,
Legal, A4, Executive or B5 in Tray#2.
a
1
Pull the paper tray completely out of the
machine.
2
Note
b
Open the tray cover (1).
1
When you are using Legal size paper,
press and hold the universal guide release
button (1) as you slide out the front of the
paper tray.
1
d
Fan the stack of paper well to avoid
paper jams and misfeeds.
Note
Always make sure that the paper is not
curled.
18
Loading documents and paper
e
Gently put the paper into the paper tray
print side down and top edge first.
Check that the paper is flat in the tray
and below the maximum paper
mark (1).
1
Loading envelopes and post
cards
Loading envelopes
2
2
„ Use envelopes that weigh from 20 to 25 lb
(75 to 95 g/m2).
„ Some envelopes need margin settings to
be set in the application. Make sure you
do a test print first.
CAUTION
f
Do not use any of the following types of
envelopes, as they will cause paper feed
problems:
Close the tray cover.
• If they are of a baggy construction.
• That are embossed (have raised writing
on them).
• That have clasps or staples.
• That are pre-printed on the inside.
Glue
g
Double flap
Push the paper tray firmly back into the
machine.
Occasionally you may experience paper
feed problems caused by the thickness,
size and flap shape of the envelopes you
are using.
Note
If you are using Auto Select, after
refilling the paper tray you should open
and close the scanner cover to reset the
machine.
19
2
Chapter 2
How to load envelopes and post cards
2
a
Before loading, press the corners and
sides of the envelopes or post cards to
make them as flat as possible.
If you have problems when printing on
envelopes, try the following suggestions:
a
b
Open the envelope flap.
c
Adjust the size and margin in your
application.
Note
If the envelopes or post cards are
‘double-feeding,’ put one envelope or post
card in the paper tray at a time.
Make sure the open flap is either to the
side of the envelope or to the back edge
of the envelope when printing.
Removing small printouts from the
machine
b
Put the envelopes or post cards into the
paper tray with the address side down
and the leading edge in first as shown in
the illustration. Press and slide the
paper side guides (1) and paper length
guide (2) to fit the size of the envelopes
or post cards.
1
2
20
2
When the machine ejects small paper onto
the output paper tray, you may not be able to
reach it. Make sure printing has finished, and
then pull the tray completely out of the
machine.
2
Loading documents and paper
Printable Area
2
The printable area depends on the settings in the application you are using. The figures below
show the unprintable areas on cut sheet paper and envelopes. The machine can only print in the
shaded areas when the Borderless print feature is available and turned on.
Cut Sheet Paper
Envelopes
3
3
4
1
4
1
2
2
Top (1)
Bottom (2)
Left (3)
Right (4)
Cut Sheet
0.12 in. (3 mm)
0.12 in. (3 mm)
0.12 in. (3 mm)
0.12 in. (3 mm)
Envelopes
0.47 in. (12 mm)
0.95 in. (24 mm)
0.12 in. (3 mm)
0.12 in. (3 mm)
Note
The Borderless feature is not available for envelopes.
21
2
3
General setup
On/Off key
3
On/Off
setting
3
When the machine is idle, you can turn it on
and off by pressing the On/Off key.
Fax Receive: Fax Only
On
External
TAD
c
22
Press a or b to choose
Fax Receive:On, or
Fax Receive:Off.
Press OK.
Press Stop/Exit.
2
Delayed Fax 1
„ You cannot
receive a fax with
Black Start or
Color Start.
Press and hold down the On/Off key
until the LCD shows Please Wait.
The LCD shows the date and time.
Press Menu, 1, 6.
Easy Receive
Manual
3
3
You can customize the machine's On/Off
key. The default setting is
Fax Receive:Off. Your machine will not
work when it is switched off, but it will clean
the print head periodically. If you turn this
setting to Fax Receive:On, you can
receive faxes or calls even when the machine
is switched off. (See On/Off key on page 22.)
a
b
Delayed Fax 1
Remote Fax
„ You cannot
receive a fax with
Black Start or
Color Start.
Fax/Tel
On/Off setting
Fax Receive
Easy Receive
Options 1
Remote Retrieval 1
3
Press and hold down the On/Off key
until the LCD shows Shutting Down.
The LCD light goes off.
Turning the machine on
a
No machine
operations will be
available.
(default)
If you have connected an external
telephone or TAD, it is always available.
a
Available
operations
Fax Receive: —
Off
Note
Turning the machine off
Receive
mode
1
Should be set before you switch off the machine.
2
You cannot receive a fax automatically even if you
have set the receive mode to Fax/Tel.
General setup
Mode Timer
The machine has four temporary mode keys
on the control panel: Fax, Scan, Copy and
Photo Capture. You can change the amount
of time the machine takes after the last Scan,
Copy or PhotoCapture operation before it
returns to Fax mode. If you choose Off, the
machine stays in the mode you used last.
a
b
c
Press Menu, 1, 1.
Press a or b to choose 0 Sec,
30 Secs, 1 Min, 2 Mins, 5 Mins or
Off.
Press OK.
Press Stop/Exit.
3
Paper settings
3
Paper Type
3
To get the best print quality, set the machine
for the type of paper you are using.
a
b
Press Menu, 1, 2.
c
Press Stop/Exit.
3
Press a or b to choose Plain Paper,
Inkjet Paper, Brother Photo,
Other Photo or Transparency.
Press OK.
Note
• The machine ejects paper with printed
surfaces face up onto the paper tray in the
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
• (MFC-5860CN only)
You can only use plain paper in Tray#2.
23
Chapter 3
Paper Size
You can use five sizes of paper for printing
copies: Letter, Legal, A4, A5, and 4 × 6 in. (10
× 15 cm) and three sizes for printing faxes:
Letter, Legal and A4. When you change the
size of paper you load in the machine, you will
need to change the paper size setting at the
same time so your machine can fit an
incoming fax on the page.
a
b
Tray use in Fax mode
(MFC-5860CN only)
You can change the default tray the machine
will use for printing received faxes.
Auto Select will allow your machine to
take paper from Tray#1 first, or from Tray#2
if:
„ Tray#1 is out of paper.
Press Menu, 1, 3.
„ Tray#2 is set to a different paper size that
is more suitable for the received faxes.
(MFC-5860CN only)
Press a or b to choose Tray#1 or
Tray#2.
Press OK.
„ Both trays are using the same size paper
and Tray#1 is not set to use plain paper.
c
Press a or b to choose Letter,
Legal, A4, A5 or 4"x6".
Press OK.
d
Press Stop/Exit.
Note
(MFC-5860CN only)
You can only use plain paper sizes Letter,
Legal or A4 in Tray#2.
24
3
a
b
c
Press Menu, 1, 9.
Press a or b to choose Tray#1 Only,
Tray#2 Only or Auto Select.
Press OK.
Press Stop/Exit.
Note
You can only use plain paper sizes Letter,
Legal or A4 in Tray#2.
3
General setup
Tray use in Copy mode
(MFC-5860CN only)
You can change the default tray the machine
will use for printing copies.
Auto Select will allow your machine to
take paper from Tray#2 if both trays are using
paper that is the same type and size and if
Tray#1 is out of paper.
To change the default settings follow the
instructions below:
a
b
c
Press Menu, 1, 8.
Press a or b to choose Tray#1 Only,
Tray#2 Only or Auto Select.
Press OK.
Press Stop/Exit.
Note
You can only use plain paper sizes Letter,
Legal or A4 in Tray#2.
Volume Settings
3
3
Ring Volume
3
You can choose a range of ring volume
levels, from Off to High.
3
While in Fax mode
, press d or c
to adjust the volume level. The LCD shows
the current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.
You can also change the volume through the
menu, by following the instructions below:
Setting the Ring Volume from the
menu
a
b
Press Menu, 1, 4, 1.
c
Press Stop/Exit.
3
Press a or b to choose Off, Low, Med
or High.
Press OK.
Beeper Volume
3
When the beeper is on, the machine will beep
when you press a key, make a mistake or
after you send or receive a fax.
You can choose a range of volume levels,
from Off to High.
a
b
Press Menu, 1, 4, 2.
c
Press Stop/Exit.
Press a or b to choose Off, Low, Med
or High.
Press OK.
25
Chapter 3
Speaker Volume
3
You can choose a range of speaker volume
levels, from Off to High.
a
b
Press Menu, 1, 4, 3.
c
Press Stop/Exit.
LCD Contrast
You can adjust the LCD contrast for a sharper
and more vivid display. If you are having
difficulty reading the LCD, try changing the
contrast setting.
Press a or b to choose Off, Low, Med
or High.
Press OK.
a
b
You can also adjust the speaker volume by
pressing Hook.
a
Press Hook.
b
Press
d or c
.
This setting will stay until you change it
again.
Automatic Daylight
Savings Time
You can set the machine to change
automatically for daylight savings time. It will
reset itself forward one hour in the Spring and
backward one hour in the Fall. Make sure you
have set the correct date and time in the
Date/Time setting.
a
b
c
26
Press Menu, 1, 5.
Press a or b to choose On or Off.
Press OK.
Press Stop/Exit.
LCD display
c
3
Press Menu, 1, 7.
Press a or b to choose Light or
Dark.
Press OK.
Press Stop/Exit.
3
3
4
Security features
TX Lock
TX Lock lets you prevent unauthorized
access to the machine.
While TX Lock is On, the following operations
are available:
„ Receiving faxes
4
4
Setting and changing the
TX Lock password
4
Setting up the password
4
Note
4
„ Fax Forwarding (If Fax Forwarding was
already On)
• If you forget the TX Lock password,
please call your Brother Customer
Service.
„ Remote retrieval (If Fax Storage was
already On)
• If you have already set the password, you
will not need to set it again.
While TX Lock is On, the following operations
are NOT available:
„ Sending faxes
a
b
Press Menu, 2, 0, 1.
c
When the LCD shows Verify:,
re-enter the password.
Press OK.
d
Press Stop/Exit.
„ Copying
„ PC printing
„ Scanning
„ PhotoCapture
Enter a 4-digit number for the password.
Press OK.
27
Chapter 4
Changing the TX Lock password
a
b
c
Turning the TX Lock on/off
Press a or b to choose
Set Password.
Press OK.
Enter a 4-digit number for the current
password.
Press OK.
Enter a 4-digit number for the new
password.
Press OK.
e
When the LCD shows Verify:,
re-enter the password.
Press OK.
Press Stop/Exit.
Turning TX Lock on
a
b
Press Menu, 2, 0, 1.
c
Enter the registered 4-digit password.
Press OK.
The machine goes offline and the LCD
shows TX Lock Mode.
Turning TX Lock off
a
b
4
Press a or b to choose Set TX Lock.
Press OK.
Press Menu.
Enter the registered 4-digit password.
Press OK.
TX lock is automatically turned off.
Note
If you enter the wrong password, the LCD
shows Wrong Password and stays
offline. The machine will stay in TX Lock
mode until the registered password is
entered.
28
4
Press Menu, 2, 0, 1.
d
f
4
4
Section II
Fax
Sending a fax
Receiving a Fax
Telephone Services and External devices
Dialing and storing numbers
Remote fax options
Printing Reports
Polling
II
30
37
41
50
54
61
63
5
Sending a fax
Entering Fax mode
To enter fax mode, press
the key will glow green.
5
(Fax), and
The LCD will show the new job number and
the memory available.The number of pages
you can scan into the memory will vary
depending on the data that is printed on them.
Faxing from the ADF
a
Make sure you are in Fax mode
b
c
d
Put the document face up in the ADF.
5
a
Make sure you are in Fax mode
b
Load your document on the scanner
glass.
c
d
Dial the fax number.
Press Black Start or Color Start.
„ If you press Black Start, the
machine starts scanning the first
page. Go to step e.
5
„ If you press Color Start, the
machine starts sending the
document.
.
e
Press Black Start or Color Start.
The machine starts scanning the
document.
The machine starts sending the
document.
„ To send more than one page, press
1 to choose Yes and go to step f.
• To cancel, press Stop/Exit.
f
• If the memory is full, the fax will be sent in
real time.
Faxing from the scanner glass
5
You can use the scanner glass to fax pages
of a book one at a time. The documents can
be up to letter or A4 size.
You cannot send multiple pages for color
faxes.
Note
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
Do one of the following:
„ To send a single page, press 2 to
choose No. (or press Black Start
again).
Dial the fax number.
Note
30
.
Put the next page on the scanner glass.
Press OK.
The machine starts scanning the page.
(Repeat step e and step f for each
additional page.)
Note
If the memory is full and you are faxing a
single page, it will be sent in real time.
Sending a fax
Faxing A4 size documents
from the scanner glass
5
When documents are A4 size, you need to
set Scan Size to A4. If you do not, the bottom
portion of the faxes will be missing.
a
Make sure you are in Fax mode
b
c
Press Menu, 2, 2, 0.
After the broadcast is finished, a Broadcast
Report will be printed.
Press a or b to choose A4.
Press OK.
5
Your machine can send a color fax to
machines that support this feature.
However, color faxes cannot be stored in the
memory. When you send a color fax, the
machine will send it in real time (even if
Real Time TX is set to Off).
Canceling a fax in progress
If you want to cancel a fax while the machine
is scanning, dialing or sending, press
Stop/Exit.
5
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups, Speed-Dial
numbers and up to 50 manually dialed
numbers in the same broadcast.
.
Color fax transmission
Broadcasting
(Black & White only)
5
a
Make sure you are in Fax mode
b
c
Load your document.
d
Repeat step c until you have entered
all the fax numbers you wish to
broadcast to.
e
Press Black Start.
.
Enter a number. Press OK.
You can use either a Speed-Dial, a
Group, or a manually entered number
using the dial pad.
Note
• If you did not use up any of the numbers
for Groups or access codes or credit card
numbers, you can ‘broadcast’ faxes to as
many as 150 different numbers.
• The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access.
• Enter the long dialing sequence numbers
as you would normally, but remember that
each Speed-Dial number counts as one
number, so the number of locations you
can store becomes limited.
• If the memory is full, press Stop/Exit to
stop the job. If more than one page has
been scanned, press Black Start to send
the portion that is in the memory.
31
5
Chapter 5
Canceling a Broadcast in
progress
a
b
Press Menu, 2, 6.
The LCD will show the fax number being
dialed.
Press OK.
The LCD will show the job number:
XXXXXXXXX
1.Clear 2.Exit
c
d
e
Press 1 to clear.
The LCD will then show the Broadcast
job number and 1.Clear 2.Exit.
To cancel the Broadcast, press 1.
5
Additional sending
operations
Sending faxes using multiple
settings
When you send a fax you can choose any
combination of these settings: resolution,
contrast, overseas mode and real time
transmission.
a
Make sure you are in Fax mode
b
c
Load your document.
d
Choose one of the options below:
Press Stop/Exit.
Choose a setting you want to change.
Press OK.
Other Settings
1.Yes 2.No
„ Press 1 to change another setting.
„ Press 2 when you have finished
choosing your settings.
e
32
5
Send the fax as usual.
.
5
Sending a fax
Contrast
5
If your document is very light or very dark, you
may want to change the contrast.
Use Light when sending a light document.
Use Dark when sending a dark document.
a
Make sure you are in Fax mode
b
c
d
Load your document.
.
To change the default resolution
a
Make sure you are in Fax mode
b
c
Press Menu, 2, 2, 2.
Press a or b to choose the resolution
you want.
Press OK.
You can choose four different resolution
settings for black & white faxes and two for
color.
Press a or b to choose Auto, Light
or Dark.
Press OK.
Black & White
Standard
Suitable for most typed
documents.
Fine
Good for small print and
transmits a little slower than
Standard resolution.
S.Fine
Good for small print or artwork
and transmits slower than Fine
resolution.
Photo
Use when the document has
varying shades of gray or is a
photograph. This has the
slowest transmission.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
• When you send a color fax.
• When you choose Photo as the
Resolution.
Changing Resolution
5
The quality of a fax can be improved by
changing the resolution. Resolution can be
changed for the next fax or for all faxes.
Color
To change the resolution for the next
fax
Make sure you are in Fax mode
b
c
Load your document.
Press Resolution then a or b to
choose the resolution.
Press OK.
.
Note
Press Menu, 2, 2, 1.
a
5
.
5
Standard
Suitable for most typed
documents.
Fine
Use when the document is a
photograph. The transmission
time is slower than Standard
resolution.
If you choose S.Fine or Photo and then
use the Color Start key to send a fax, the
machine will send the fax using the Fine
setting.
33
5
Chapter 5
Dual access
(Black & White only)
Sending in real time for all faxes
5
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number and available memory.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX to On for all documents or
Next Fax Only for the next fax only.
Note
In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
34
Press Menu, 2, 2, 5.
.
Press a or b to choose On or Off.
Press OK.
Sending in real time for the next fax
only
If the Out of Memory message appears
while scanning documents, press
Stop/Exit to cancel or BlackStart to send
the scanned pages.
If the memory is full or you are sending a color
fax, the machine will send the document in
real time (even if Real Time TX is set to
Off).
b
c
Note
When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the phone line is
free, the machine will start dialing and
sending.
Make sure you are in Fax mode
Setup Send
5.Real Time TX
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Real time transmission
a
5
a
Make sure you are in Fax mode
b
c
Press Menu, 2, 2, 5.
5
.
Press a or b to choose
Next Fax Only. Press OK.
5
d
Press a or b to choose On (or Off).
Press OK.
e
Press Stop/Exit.
Overseas Mode
5
If you are having difficulty sending a fax
overseas due to possible interference on the
phone line, we recommend that you turn on
the Overseas mode. After you send a fax
using this feature, the feature will turn itself
off.
a
Make sure you are in Fax mode
b
c
d
Load your document.
Press Menu, 2, 2, 7.
Press a or b to choose On (or Off).
Press OK.
.
Sending a fax
Delayed Faxing
(Black & White only)
5
During the day you can store up to 50 faxes
in the memory to be sent within 24-hours.
These faxes will be sent at the time of day you
enter in step d.
a
Make sure you are in Fax mode
b
c
Load your document.
.
Press Menu, 2, 2, 3.
Setup Send
3.Delayed Fax
d
Do one of the following:
Delayed Batch Transmission
(Black & White only)
Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time. All delayed faxes that are
scheduled to be sent at the same time to the
same fax number will be sent as one fax to
save transmission time.
a
Make sure you are in Fax mode
b
c
Press Menu, 2, 2, 4.
d
„ Enter the time you want the fax to be
sent (in 24-hour format).
Checking and canceling
waiting jobs
Press OK.
Note
The number of pages you can scan into
the memory depends on the amount of
data that is printed on each page.
.
5
Press a or b to choose On (or Off).
Press OK.
„ Press OK to accept the displayed
time.
(For example, enter 19:45 for
7:45 PM.)
5
Press Stop/Exit.
5
You can check which jobs are still waiting in
the memory to be sent and cancel a job. (If
there are no jobs, the LCD shows
No Jobs Waiting.)
a
Press Menu, 2, 6.
Any waiting jobs appear on the LCD.
b
Press a or b to scroll through the jobs
and choose the job you want to cancel.
Press OK.
c
Do one of the following:
„ Press 1 to cancel it.
„ Press 2 to exit without canceling.
d
When you have finished, press
Stop/Exit.
35
Chapter 5
Sending a fax manually
5
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
a
Make sure you are in Fax mode
b
c
Load your document.
d
e
If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Black Start to send
the pages scanned so far, or to press
Stop/Exit to cancel the operation
.
Pick up the handset of an external
phone or press Hook and listen for a dial
tone.
Note
If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real time transmission on page 34.)
Dial the fax number you want to call.
When you hear the fax tone, press
Black Start or Color Start.
„ If you are using the scanner glass
press 1 to send a fax.
f
If you picked up the handset of an
external phone replace it.
Sending a fax at the end of a
conversation
5
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Make sure you are in Fax mode
c
d
Load your document.
Press Black Start or Color Start.
„ If you are using the scanner glass
press 1 to send a fax.
1.Send 2.Receive
e
36
Replace the handset of an external
phone.
.
Out of Memory message
5
6
Receiving a Fax
6
Receive modes
6
You must choose a receive mode depending on the external devices and telephone subscriber
services you have on your line.
Choosing the Receive Mode
6
The diagram below will help you choose the correct mode.
For more detailed information on the receive modes see Using receive modes on page 38.
Do you use a Distinctive Ring subscriber service?
Yes
See Distinctive Ring.
No
6
Are you connecting an external telephone or external TAD (telephone
answering device) to the machine?
No
Yes
Are you using the voice message
function of your external TAD
(telephone answering device)?
No
Do you want the machine to
answer fax and telephone
calls automatically?
No
Manual
Yes
Do you want to use the
machine for fax only?
Yes
No
Yes
Fax Only
Fax/Tel
External TAD
To choose or change your Receive Mode.
a
b
c
Press Menu, 0, 1.
Press a or b to choose Fax Only,
Fax/Tel, External TAD or Manual.
Press OK.
The LCD will display the current receive
mode.
1
12/10 11:53 Fax
Res:Standard
Press Stop/Exit.
2
1
Current receive mode
Fax: Fax Only
2
Fax resolution
37
Chapter 6
Using receive modes
6
External TAD
6
External TAD mode lets an external
answering device manage your incoming
calls. Incoming calls will be handled in one of
the following ways:
Some receive modes answer automatically
(Fax Only and Fax/Tel). You may want to
change the ring delay before using these
modes. (See Ring Delay on page 38.)
„ Faxes will be automatically received.
Fax only
6
Fax only mode will automatically answer
every call. If the call is a fax your machine will
receive it.
Fax/Tel
For more information see Connecting an
external TAD (telephone answering
device) on page 45.
6
Fax/Tel mode helps you automatically
manage incoming calls, by recognizing
whether they are fax or voice calls and
handling them in one of the following ways:
The Ring Delay sets the number of times the
machine rings before it answers in Fax Only
or Fax/Tel mode. If you have external or
extension phones on the same line as the
machine or subscribe to the telephone
company’s Distinctive Ring service, choose
the maximum number of rings.
„ Voice calls will start the F/T ring to tell you
to pick up the line. The F/T ring is a fast
double ring made by your machine.
Also see F/T Ring Time (Fax/Tel mode
only) on page 39 and Ring
Delay on page 38.
Manual mode turns off all automatic
answering functions unless you are using the
Distinctive Ring feature.
To receive a fax in manual mode press Black
Start or Color Start when you hear fax tones
(short repeating beeps). You can also use the
Easy Receive feature to receive faxes by
lifting a handset on the same line as the
machine.
Also see Easy Receive on page 39.
38
Receive mode settings
Ring Delay
„ Faxes will be automatically received.
Manual
„ Voice callers can record a message on the
external TAD.
(See Using external and extension
telephones on page 48 and Easy
Receive on page 39.)
6
a
b
c
Press Menu, 2, 1, 1.
Press a or b to choose how many
times the line rings before the machine
answers (00-04).
Press OK.
If you choose 00, the line will not ring at
all.
Press Stop/Exit.
6
6
Receiving a Fax
F/T Ring Time
(Fax/Tel mode only)
If you set the Receive Mode to Fax/Tel, you
need to decide how long the machine will
signal you with its special pseudo/double-ring
when you have a voice call. If it's a fax call,
the machine receives the fax.
This pseudo/double-ring happens after the
initial ringing from the phone company. Only
the machine rings and no other phones on the
same line will ring with the special
pseudo/double-ring. However, you can still
answer the call on any telephone.
a
b
c
Press Menu, 2, 1, 2.
Press a or b to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or
70 seconds).
Press OK.
Press Stop/Exit.
Note
Even if the caller hangs up during the
pseudo/double-ringing, the machine will
continue to ring for the set time.
Easy Receive
6
6
If Easy Receive is On:
6
The machine receives fax calls automatically,
even if you lift the handset of an extension or
external phone. When you see Receiving
on the LCD or when you hear ‘chirps’ through
the handset of an extension phone connected
to another telephone wall jack, just replace
the handset and your machine will do the rest.
If Easy Receive is Off:
6
You have to lift the handset of an external
phone, and then press Black Start or
Color Start on the machine.
6
If you are not at your machine, press l 5 1 on
the extension phone. (See Using external
and extension telephones on page 48.)
Note
• If this feature is set to On, but your
machine does not connect a fax call when
you lift an extension or external phone
handset, press the fax receive code l 5 1.
• If you send faxes from a computer on the
same phone line and the machine
intercepts them, set Easy Receive to Off.
a
b
c
Press Menu, 2, 1, 3.
Press a or b to choose On (or Off).
Press OK.
Press Stop/Exit.
39
Chapter 6
Additional receiving
operations
Printing a fax from the
memory
6
Printing a reduced incoming
fax
6
If you choose On, the machine automatically
reduces each page of an incoming fax to fit on
one page of A4, Letter or Legal size paper.
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 5.
b
.
Setup Receive
5.Auto Reduction
c
Use a or b to choose On or Off.
Press OK.
d
Press Stop/Exit.
Receiving a fax at the end of a
conversation
At the end of a conversation you can ask the
other party to send you a fax before you both
hang up.
a
Ask the other party to place the
document in their machine and to press
Start or Send key.
b
When you hear the CNG tones (slowly
repeating beeps), press Black Start or
Color Start.
c
Press 2 to receive a fax.
1.Send 2.Receive
d
40
Replace the external handset.
Press Menu, 2, 5, 3.
Remote Fax Opt
3.Print Fax
The machine calculates the reduction ratio by
using the page size of the fax and your Paper
Size setting (Menu, 1, 3).
a
If you are using the Paging or Fax Storage
feature (Menu, 2, 5, 1), you can still print a fax
from the memory when you are at your
machine. (See Turning off Remote Fax
Options on page 57.)
6
Press Black Start.
6
7
Telephone Services and External
devices
Voice Operations
7
Voice calls can be made either with an
extension or external telephone.
Tone or pulse
(Canada only)
7
7
You can change the default setting of the
On/Off key to Fax Receive:On so that you
can receive faxes when the power key is off.
(See On/Off setting on page 22.) Fax/Tel
mode will work in the following ways.
Fax/Tel mode does not work when the power
key is off. The machine will not answer
telephone or fax calls and will keep ringing. If
you are at an external or extension phone, lift
the handset and talk. If you hear fax tones,
hold the handset until Easy Receive activates
your machine. If the other party says they
want to send you a fax, activate the machine
by pressing l 5 1.
If you are using an external phone and have
a pulse dialing service, but need to send tone
signals (for example, for telephone banking),
follow the instructions below. If you have
Touch Tone service, you will not need this
feature to send tone signals.
a
b
Fax/Tel mode when the power
key is off
7
Lift the handset of the external phone.
Press # on the control panel of your
machine. Any digits dialed after this will
send tone signals.
When you hang up, the machine will
return to the pulse dialing service.
Fax/Tel mode when the power
key is on
7
When the machine is in Fax/Tel mode, it will
use the F/T Ring Time
(pseudo/double-ringing) to alert you to pick
up a voice call.
If you are at an extension phone, you'll need
to lift the handset during the F/T Ring Time
and then press # 5 1 between the
pseudo/double rings. If no one is on the line,
or if someone wants to send you a fax, send
the call back to the machine by pressing
l 5 1.
41
7
Chapter 7
Telephone services
7
Your machine supports the Caller ID and
Distinctive Ring subscriber telephone
services that some telephone companies
offer.
Note
You must pay for your telephone
company's Distinctive Ring service before
you program the machine to work with it.
7
Brother uses the term ‘Distinctive Ring’ but
different telephone companies have other
names for this service such as SmartRing,
RingMaster, Teen-Ring, Indent-a-Call or
Indent-a-Ring.
What does your telephone company's
‘Distinctive Ring’ do?
Your telephone company's Distinctive Ring
service allows you to have more than one
number on the same phone line. If you need
more than one phone number, it is
cheaper than paying for an extra line. Each
phone number has its own distinctive ring
pattern, so you will know which phone
number is ringing. This is one way you can
have a separate phone number for your
machine.
Note
Please call your telephone company for
availability and rates.
42
7
The Brother machine has a Distinctive Ring
feature that allows you to use your machine to
take full advantage of the telephone
company's Distinctive Ring service. The new
phone number on your line can just receive
faxes.
Features like Voice Mail, Call Waiting, Call
Waiting/Caller ID, RingMaster, answering
services, alarm systems or other custom
features on one phone line may affect the
way your machine works. If you have Voice
Mail on your phone line, please read the
following carefully.
Distinctive Ring
What does Brother's ‘Distinctive Ring’
do?
7
Do you have Voice Mail?
If you have Voice Mail on the phone line that
you will install your new machine on, there is
a strong possibility that Voice Mail and the
machine will conflict with each other while
receiving incoming calls. However, the
Distinctive Ring feature allows you to use
more than one number on your line, so
both Voice Mail and the machine can work
together without any problems. If each one
has a separate phone number, neither will
interfere with the other's operations.
If you decide to get the Distinctive Ring
service from the telephone company, you will
need to follow the directions on next page to
‘register’ the new Distinctive Ring pattern
they give you. This is so your machine can
recognize its incoming calls.
Note
You can change or cancel the Distinctive
Ring pattern at any time. You can switch it
off temporarily, and turn it back on later.
When you get a new fax number, make
sure you reset this feature.
7
Telephone Services and External devices
Before you choose the ring pattern to
register
a
You can only register one Distinctive Ring
pattern with the machine. Some ring patterns
cannot be registered. The ring patterns below
are supported by your Brother machine.
Register the one your telephone company
gives you.
Ring
Pattern
Rings
1
long-long
2
short-long-short
3
short-short-long
4
very long (normal
pattern)
Press Menu, 2, 0, 3.
Miscellaneous
3.Distinctive
7
b
Press a or b to choose Set.
Press OK.
c
Press a or b to choose the stored ring
pattern you want to use.
Press OK.
(You hear each pattern as you scroll
through the four patterns. Make sure
you choose the pattern that the
telephone company gave you.)
d
Press Stop/Exit.
Distinctive Ring is now set to on.
Turning off Distinctive Ring
Note
a
b
If the ring pattern you received is not on
this chart, please call your telephone
company and ask for one that is
shown.
c
„ The machine will only answer calls to its
registered number.
7
7
Press Menu, 2, 0, 3.
Press a or b to choose Off.
Press OK.
Press Stop/Exit.
Note
If you turn off Distinctive Ring, the
machine will stay in Manual receive
mode. You will need to set the Receive
Mode again. (See Choosing the Receive
Mode on page 37.)
„ The first two rings are silent on the
machine. This is because the fax must
‘listen’ to the ring pattern (to compare it to
the pattern that was ‘registered’). (Other
telephones on the same line will ring.)
„ If you program the machine properly, it will
recognize the registered ring pattern of the
‘fax number’ within 2 ring patterns and
then answer with a fax tone. When the
‘voice number’ is called, the machine will
not answer.
Registering the Distinctive Ring
pattern
7
Very Important!
After you have set the Distinctive Ring feature
to on, the receive mode is set to Manual
automatically. You cannot change the receive
mode to another mode while the Distinctive
Ring is set to on.
43
Chapter 7
Caller ID
The Caller ID feature lets you use the Caller
ID subscriber service offered by many local
telephone companies. Call your telephone
company for details. This service shows the
telephone number, or name if it is available,
of your caller as the line rings.
After a few rings, the LCD shows the
telephone number of your caller (and name, if
available). Once you pick up the external
phone's handset, the Caller ID information
disappears from the LCD, but the call
information stays stored in the Caller ID
memory.
„ You can see the first 16 characters of the
number (or name).
7
Viewing Caller ID List
Your machine stores information for the last
thirty calls in the Caller ID list. You can view
or print this list. When the thirty-first call
comes in to the machine, it replaces
information about the first call.
a
b
You can print a list of the Caller ID information
received by your machine. (See Printing
Caller ID List on page 44.)
Note
Caller ID service varies with different
carriers. Call your local telephone
company to find out about the kind of
service available in your area.
Press a or b to choose Display#.
Press OK.
The Caller ID of the last call will appear
on the display. If no ID is stored, the
beeper will sound and No Caller ID
will appear on the display.
Press a or b to scroll through the Caller
ID memory to choose the Caller ID you
want to view, and then press OK.
The LCD shows the caller's number and
the date and time of the call.
d
Do one of the following:
„ To return to the Caller ID listing,
press a or b.
„ To finish viewing, press Stop/Exit.
Printing Caller ID List
a
b
c
d
44
Press Menu, 2, 0, 4.
c
„ The Out of Area message means the
call originated outside your Caller ID
service area.
„ The Private Call message means the
caller has intentionally blocked
transmission of information.
7
Press Menu, 2, 0, 4.
Press a or b to choose
Print Report.
Press OK.
If no ID is stored, the beeper will sound
and No Caller ID will appear on the
LCD.
Press Black Start or Color Start.
After printing has finished, press
Stop/Exit.
7
Telephone Services and External devices
Connecting an external
TAD (telephone
answering device)
You may choose to connect an external
answering device. However, when you have
an external TAD on the same telephone line
as the machine, the TAD answers all calls
and the machine ‘listens’ for fax calling (CNG)
tones. If it hears them, the machine takes
over the call and receives the fax. If it does
not hear CNG tones, the machine lets the
TAD continue playing your outgoing message
so your caller can leave you a voice
message.
The TAD must answer within four rings (the
recommended setting is two rings). The
machine cannot hear CNG tones until the
TAD has answered the call, and with four
rings there are only 8 to 10 seconds of CNG
tones left for the fax ‘handshake’. Make sure
you carefully follow the instructions in this
guide for recording your outgoing message.
We do not recommend using the toll saver
feature on your external answering machine if
it exceeds five rings.
Note
• If you do not receive all your faxes, reduce
the Ring Delay setting on your external
TAD.
• If You Subscribe to your Telephone
company's Distinctive Ring Service:
You may connect an external TAD to a
separate wall jack only if you subscribe to
your telephone company's Distinctive
Ring service, have registered the
distinctive ring pattern on your machine,
and use that number as a fax number. The
recommended setting is at least four rings
on the external TAD when you have the
telephone company's Distinctive Ring
Service. You cannot use the Toll Saver
setting.
• If You Do Not Subscribe to Distinctive
Ring Service:
You must plug your TAD into the EXT.
jack of your machine. If your TAD is
plugged into a wall jack, both your
machine and the TAD will try to control the
phone line. (See the illustration below.)
7
•
1
1
7
1
TAD
When the TAD answers a call, the LCD
shows Telephone.
Connections
7
The external TAD must be plugged into the
jack labeled EXT. Your machine cannot work
properly if you plug the TAD into a wall jack
(unless you are using Distinctive Ring).
a
Plug the telephone line cord from the
telephone wall jack into the jack labeled
LINE.
b
Plug the telephone line cord from the
external TAD into the jack labeled EXT.
(Make sure this cord is connected to the
TAD at the TAD's telephone line jack,
and not its handset jack.)
c
Set your external TAD to four rings or
less. (The machine's Ring Delay setting
does not apply.)
d
Record the outgoing message on your
external TAD.
45
Chapter 7
e
f
Set the TAD to answer calls.
Special line considerations
Set the Receive Mode to
External TAD. (See Choosing the
Receive Mode on page 37.)
Roll over phone lines
Recording an outgoing
message (OGM) on an
external TAD
7
Timing is important in recording this
message. The message sets up the ways to
handle both manual and automatic fax
reception.
a
Record 5 seconds of silence at the
beginning of your message. (This allows
your machine time to listen for the fax
CNG tones of automatic transmissions
before they stop.)
b
c
Limit your speaking to 20 seconds.
End your 20-second message by giving
your Fax Receive Code for people
sending manual faxes. For example:
‘After the beep, leave a message or
send a fax by pressing l 5 1 and Start.’
Note
We recommend beginning your OGM with
an initial 5-second silence because the
machine cannot hear fax tones over a
resonant or loud voice. You may try
omitting this pause, but if your machine
has trouble receiving, then you must
re-record the OGM to include it.
46
7
7
A roll over phone system is a group of two or
more separate telephone lines that pass
incoming calls to each other if they are busy.
The calls are usually passed down or ‘rolled
over’ to the next available phone line in a
preset order.
Your machine can work in a roll over system
as long as it is the last number in the
sequence, so the call cannot roll away. Do not
put the machine on any of the other numbers;
when the other lines are busy and a second
fax call is received, the fax call will be sent to
a line that does not have a fax machine. Your
machine will work best on a dedicated
line.
Two-line phone system
7
A two-line phone system is nothing more than
two separate phone numbers on the same wall
outlet. The two phone numbers can be on
separate jacks (RJ11) or mixed into one jack
(RJ14). Your machine must be plugged into an
RJ11 jack. RJ11 and RJ14 jacks may be equal
in size and appearance and both may contain
four wires (black, red, green, yellow). To test
the type of jack, plug in a two-line phone and
see if it can access both lines. If it can, you
must separate the line for your machine. (See
Easy Receive on page 39.)
Converting telephone wall outlets
There are three ways to convert to an RJ11
jack. The first two ways may require help from
the telephone company. You can change the
wall outlets from one RJ14 jack to two RJ11
jacks. Or you can have an RJ11 wall outlet
installed and slave or jump one of the phone
numbers to it.
7
Telephone Services and External devices
d
The third way is the easiest: Buy a triplex
adapter. You can plug a triplex adapter into
an RJ14 outlet. It separates the wires into two
separate RJ11 jacks (Line 1, Line 2) and a
third RJ14 jack (Lines 1 and 2). If your
machine is on Line 1, plug the machine into
L1 of the triplex adapter. If your machine is on
Line 2, plug it into L2 of the triple adapter.
Triplex Adapter
Plug one end of the second telephone
line cord for your TAD into the L2 jack of
the two-line TAD. Plug the other end into
the EXT. jack on the left side of the
machine.
1
2
7
RJ14
3
1
Triplex Adapter
RJ11
2
Two Line Phone
RJ14
3
External Two Line TAD
4
Machine
Installing machine, external two-line
TAD and two-line telephone
When you are installing an external two-line
telephone answering device (TAD) and a
two-line telephone, your machine must be
isolated on one line at both the wall jack and
at the TAD. The most common connection is
to put the machine on Line 2, which is
explained in the following steps. The back of
the two-line TAD must have two telephone
jacks: one labeled L1 or L1/L2, and the other
labeled L2. You will need at least three
telephone line cords, the one that came with
your machine and two for your external
two-line TAD. You will need a fourth line cord
if you add a two-line telephone.
a
Put the two-line TAD and the two-line
telephone next to your machine.
b
Plug one end of the telephone line cord
for your machine into the L2 jack of the
triplex adapter. Plug the other end into
the LINE jack on the back of the
machine.
c
4
Plug one end of the first telephone line
cord for your TAD into the L1 jack of the
triplex adapter. Plug the other end into
the L1 or L1/L2 jack of the two-line TAD.
7
You can keep two-line telephones on other
wall outlets as always. There are two ways to
add a two-line telephone to the machine's
wall outlet. You can plug the telephone line
cord from the two-line telephone into the
L1+L2 jack of the triplex adapter. Or you can
plug the two-line telephone into the TEL jack
of the two-line TAD.
Multi-line connections (PBX)
7
7
We suggest you ask the company who
installed your PBX to connect your machine.
If you have a multi line system we suggest
you ask the installer to connect the unit to the
last line on the system. This prevents the
machine being activated each time the
system receives telephone calls. If all
incoming calls will be answered by a
switchboard operator we recommend that
you set the Receive Mode to Manual.
We cannot guarantee that your machine will
operate properly under all circumstances
when connected to a PBX. Any difficulties
with sending or receiving faxes should be
reported first to the company who handles
your PBX.
47
Chapter 7
External and extension
phones
If you answer a call and no
one is on the line:
7
7
You should assume that you're receiving a
manual fax.
Connecting an external or
extension telephone
7
You can connect a separate telephone (or
telephone answering device) directly to your
machine as shown in the diagram below.
Press l 5 1 and wait for the chirp or until the
LCD shows Receiving, and then hang up.
Note
You can also use the Easy Receive
feature to make your machine
automatically take the call. (See Easy
Receive on page 39.)
Connect the telephone line cord to the jack
labeled EXT.
1
Using a non-Brother cordless
external telephone
7
If your non-brother cordless telephone is
connected to the EXT. jack of the machine
and you typically carry the cordless handset
elsewhere, it is easier to answer calls during
the Ring Delay.
2
If you let the machine answer first, you will
have to go to the machine so you can press
Hook to send the call to the cordless handset.
1
Extension telephone
2
External telephone
Using remote codes
When you are using an external phone, the
LCD shows Telephone.
Using external and extension
telephones
If you answer a fax call on an extension or an
external telephone connected to the EXT.
jack of the machine, you can make your
machine take the call by using the Fax
Receive Code. When you press the Fax
Receive Code l 5 1, the machine starts to
receive the fax.
If the machine answers a voice call and
pseudo/double-rings for you to take over, use
the Telephone Answer Code # 5 1 to take the
call at an extension phone. (See F/T Ring
Time (Fax/Tel mode only) on page 39.)
48
Fax receive code
7
7
7
If you answer a fax call on an extension or
external telephone, you can tell your machine to
receive it by dialing the fax receive code l 5 1.
Wait for the chirping sounds then replace the
handset. (See Easy Receive on page 39.)
Your caller will have to press Start to send the
fax.
Telephone answer code
7
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T
(double) ring after the initial ring delay. If you
pick up the call on an extension phone you
can turn the F/T ring off by pressing # 5 1
(make sure you press this between the rings).
Telephone Services and External devices
Changing the remote codes
7
The preset Fax Receive Code is l 5 1. The
preset Telephone Answer Code is # 5 1. If
you want to, you can replace them with your
own codes.
a
Press Menu, 2, 1, 4.
Setup Receive
4.Remote Codes
b
Press a or b to choose On (or Off).
Press OK.
c
Enter the new Fax Receive Code.
Press OK.
d
Enter the new Telephone Answer Code.
Press OK.
e
Press Stop/Exit.
7
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another
three-digit code (such as # # # and 9 9 9).
• Remote Codes might not work with some
telephone systems.
49
8
Dialing and storing numbers
How to Dial
Manual dialing
8
8
Search
8
You can search for names you have stored in
the Speed-Dial memories.
Press Search/Speed Dial and the menu
keys to search numerically or alphabetically.
Press all of the digits of the fax number.
1
Speed-Dialing
a
Two-digit number
Note
If the LCD shows Not Registered
when you enter a Speed-Dial number, a
number has not been stored at this
location.
50
8
Press Search/Speed Dial, the #
(pound) key, and then the two digit
Speed-Dial number.
8
2
1
To search numerically.
2
To search alphabetically, you can use the
dial pad to enter the first letter of the name
you are looking for.
Dialing and storing numbers
Fax Redial
8
If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Black Start or Color Start to try again. If you
want to make a second call to the last number
dialed, you can save time by pressing
Redial/Pause and Black Start or
Color Start.
Storing Speed-Dial numbers
You can store up to 100 Speed-Dial locations
with a name. When you dial you will only have
to press a few keys (For example:
Search/Speed Dial, # the two-digit number,
and Black Start or Color Start).
Redial/Pause only works if you dialed from
the control panel.
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial one time after five minutes.
a
b
Press Menu, 2, 3, 1.
c
Enter the fax or telephone number (up to
20 digits).
Press OK.
d
Do one of the following:
Note
In Real Time Transmission the automatic
redial feature does not work when using
the scanner glass.
Storing numbers
Use the dial pad to enter a 2-digit
Speed-Dial location number (00-99).
Press OK.
„ Enter the name (up to 16 characters)
using the dial pad.
Press OK. (To help you enter letters,
see Entering Text on page 132.)
8
„ To store the number without a name,
press OK.
You can set up your machine to do the
following types of easy dialing: Speed-Dial
and Groups for broadcasting faxes. When
you dial a Quick-Dial number, the LCD shows
the name, if you stored it, or the number.
e
Do one of the following:
„ To store another Speed-Dial
number, go to step b.
„ To finish the setting, press
Stop/Exit.
Note
If you lose electrical power, the Quick-Dial
numbers that are in the memory will not be
lost.
Storing a pause
8
8
Press Redial/Pause to put a 3.5-second
pause between numbers. If you are dialing
overseas, you can press Redial/Pause as
many times as needed to increase the length
of the pause.
51
8
Chapter 8
Changing Speed-Dial
numbers
If you try to store a Speed-Dial number where
a number has already been stored, the LCD
will show the name or number that has been
stored there, and will ask you to do one of the
following:
„ Press 1 to change the stored number.
#05:Mike
1.Change
2.Exit
„ Press 2 to exit without making a change.
If you chose 1, you will be able to change the
stored number and name, or enter a new one.
Follow the instructions below:
a
b
Enter a new number. Press OK.
8
Setting up groups for
broadcasting
If you regularly want to send the same fax
message to many fax numbers you can set
up a Group. Groups are stored on a
Speed-Dial number. Each group uses up a
Speed-Dial location. You can then send the
fax message to all the numbers stored in a
group just by entering a Speed-Dial number,
and then pressing Black Start.
Before you can add numbers to a Group, you
need to store them as Speed-Dial numbers.
You can have up to six small Groups, or you
can assign up to 99 numbers to one large
Group.
a
Set Quick-Dial
2.Setup Groups
Enter a new name. Press OK.
To change a character, use d or c to position
the cursor under the character you want to
change, then press Clear/Back.
Press Menu, 2, 3, 2.
b
Use the dial pad to enter the two-digit
Speed-Dial number where you want to
store the Group.
Press OK.
c
Use the dial pad to enter a Group
number (1 to 6).
Press OK.
Re-enter the character.
Setup Groups
Setup Group:G0_
d
To add Speed-Dial numbers follow the
instructions below:
For example, for Speed-Dial numbers
05 and 09.
Press Search/Speed Dial, 05,
Search/Speed Dial, 09.
The LCD shows: #05 #09.
Setup Groups
G01: #05 #09
52
e
Press OK when you have finished
adding numbers.
f
Use the dial pad to enter a name for the
Group.
Press OK.
8
Dialing and storing numbers
g
Press Stop/Exit.
Note
You can easily print a list of all your
Speed-Dial numbers. Numbers that are
part of a group will be marked in the
GROUP column. (See How to print a
report on page 62.)
Dialing Access codes and
credit card numbers
8
You can combine more than one Quick-Dial
number when you dial. This feature may be
useful if you need to dial an access code for
a cheaper rate long distance carrier.
For example, you might have stored ‘555’ on
Speed-Dial #03 and ‘7000’ on Speed-Dial
#02. You can use them both to dial ‘555-7000’
if you press the following keys:
8
Search/Speed Dial, #03,
Search/Speed Dial, #02, and Black Start or
Color Start.
Numbers can be added manually by entering
them on the dial pad:
Search/Speed Dial, #03, 7, 0, 0, 1 (on the
dial pad), and Black Start or Color Start.
This would dial ‘555–7001’. You can also add
a pause by pressing the Redial/Pause key.
53
9
Remote fax options
Remote fax options ARE NOT available for
color fax.
Paging
You can use only one fax option at a time.
When you choose Paging, your machine
dials the pager number you have
programmed, and then dials your Personal
identification Number (PIN). This activates
your pager so you will know that you have a
fax message in the memory.
Fax Forwarding
9
The fax forwarding feature lets you
automatically forward your received faxes to
another machine. If you choose
Backup Print:On the machine will also
print the fax (this is a safety feature in case
there is a power failure).
a
b
Press a or b to choose Fax Forward.
Press OK.
The LCD will ask you to enter the fax
number you want your faxes to be
forwarded to.
c
Enter the forwarding number (up to 20
digits).
Press OK.
Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
Note
When Fax Forwarding is turned on your
machine will only receive black & white
faxes into memory. Color faxes will not be
received, unless the sending machine
converts them to black & white before
sending.
e
54
9
Press Menu, 2, 5, 1.
Remote Fax Opt
1.Fwd/Page/Store
b
Press a or b to choose Paging.
Press OK.
c
Enter your pager phone number
followed by # # (up to 20 digits).
Press OK.
Do not include the area code if it is the
same as that of your machine.
For example, press:
1 8 0 0 5 5 5 1 2 3 4 # #.
d
Do one of the following:
Press Menu, 2, 5, 1.
Remote Fax Opt
1.Fwd/Page/Store
d
a
9
„ If your pager needs a PIN, enter the
PIN, press #, press Redial/Pause,
and then enter your fax number
followed by # #.
Press OK.
For example, press:
1 2 3 4 5 # Redial/Pause 1 8 0 0 5 5
5 6 7 8 9 # #.
„ If you do not need a PIN, press:
Redial/Pause, and then enter your
fax number followed by # #.
Press OK.
For example, press:
Press Stop/Exit.
Redial/Pause 1 8 0 0 5 5 5 6 7 8 9 # #
Remote fax options
e
Press Stop/Exit.
Note
• You cannot change a paging number or
PIN remotely.
• If you have set Paging, a backup copy will
automatically be printed at the machine.
• If Paging is turned on your machine
cannot receive a color fax unless the
sending machine converts it to black &
white.
Fax Storage
9
The fax storage feature lets you store your
received faxes in the machine’s memory. You
can retrieve stored fax messages from a fax
machine at another location using the remote
retrieval commands. (See Retrieving fax
messages on page 59.) Your machine will
automatically print a copy of the stored fax.
a
Press Menu, 2, 5, 1.
Remote Fax Opt
1.Fwd/Page/Store
b
Press a or b to choose Fax Storage.
Press OK.
c
Press Stop/Exit.
Note
If Fax Storage is turned on your machine
cannot receive a color fax unless the
sending machine converts it to black &
white.
9
55
Chapter 9
PC Fax Receive
e
Press Stop/Exit.
9
If you turn on the PC-Fax Receive feature
your machine will store received faxes in
memory and send them to your PC
automatically. You can then use your PC to
view and store these faxes.
Even if you have turned off your PC (at night
or on the weekend, for example), your
machine will receive and store your faxes in
its memory. The LCD will show the number of
stored faxes received, for example:
PC Fax Msg:001
Note
• PC Fax Receive is not supported in the
Mac OS®.
• Before you can set up PC Fax Receive
you must install the MFL-Pro Suite
software on your PC. Make sure your PC
is connected and turned on. (For details
see PC-FAX receiving in the Software
User’s Guide on the CD-ROM.)
When you start your PC and the PC-FAX
Receiving software runs, your machine
transfers your faxes to your PC automatically.
• If you get an error message and the
machine cannot print the faxes in memory,
you can use this setting to transfer your
faxes to your PC. (For details, see Error
messages on page 105.)
To transfer the received faxes to your PC you
must have the PC-FAX Receiving software
running on your PC. (For details, see PC-FAX
receiving in the Software User’s Guide on the
CD-ROM.)
• When PC Fax Receive is turned on only
black & white faxes can be received into
the memory and sent to the PC. Color
faxes will be received in real time and
printed in color.
If you choose Backup Print:On the
machine will also print the fax.
a
Press Menu, 2, 5, 1.
Remote Fax Opt
1.Fwd/Page/Store
b
Press a or b to choose
PC Fax Receive.
Press OK.
c
Press a or b to choose <USB> or the
PC you want to receive.
Press OK.
d
Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
56
Remote fax options
Changing Remote Fax
Options
If received faxes are left in your machine's
memory when you change the remote fax
options, the LCD will ask you one of the
following messages:
Erase All Fax?
1.Yes 2.No
Print All Fax?
1.Yes 2.No
„ If you press 1, faxes in the memory will be
erased or printed before the setting
changes. If a backup copy has already
been printed it will not be printed again.
9
Turning off Remote Fax
Options
a
9
Press Menu, 2, 5, 1.
Remote Fax Opt
1.Fwd/Page/Store
b
Press a or b to choose Off.
Press OK.
c
Press Stop/Exit.
Note
The LCD will give you more options if
there are received faxes still in your
machine’s memory. (See Changing
Remote Fax Options on page 57.)
„ If you press 2, faxes in the memory will not
be erased or printed and the setting will be
unchanged.
If received faxes are left in the machine's
memory when you change to
PC Fax Receive from another option
(Fax Forward, Paging or Fax Storage),
the LCD will ask you the following message:
9
Send Fax to PC?
1.Yes 2.No
„ If you press 1, faxes in the memory will be
sent to your PC before the setting
changes. Faxes in the memory will be sent
to your PC when the PC Fax Receive icon
is active on your PC. (See PC-FAX
receiving in the Software User’s Guide on
the CD-ROM.)
„ If you press 2, faxes in the memory will not
be erased or transferred to your PC and
the setting will be unchanged.
57
Chapter 9
Remote Retrieval
9
You can call your machine from any touch
tone telephone or fax machine, then use the
remote access code and remote commands
to retrieve fax messages.
Setting a Remote Access
Code
The remote access code lets you access the
remote retrieval features when you are away
from your machine. Before you use the
remote access and retrieval features, you
have to set up your own code. The factory
default code is inactive code (---l).
a
Press Menu, 2, 5, 2.
Using your Remote Access
Code
a
Dial your fax number from a telephone
or another fax machine using touch
tone.
b
When your machine answers, enter
your remote access code (3 digits
followed by l).
c
The machine signals if it has received
messages:
9
„ 1 long beep — Fax messages
„ No beeps — No messages
d
When the machine gives two short
beeps, enter a command.
The machine will hang up if you wait
longer than 30 seconds to enter a
command.
The machine will beep three times if you
enter an invalid command.
e
Press 9, 0 to reset the machine when
you have finished.
f
Hang up.
Remote Fax Opt
2.Remote Access
b
c
Enter a three-digit code using numbers
0-9, l, or #.
Press OK. (The preset ‘l’ cannot be
changed.)
Press Stop/Exit.
Note
Do not use the same code as your fax
receive code (l 5 1) or telephone answer
code (# 5 1). (See Using external and
extension telephones on page 48.)
You can change your code at any time by
entering a new one. If you want to make your
code inactive, press Clear/Back in step b to
restore the inactive setting (---l) and
press OK.
58
Note
If your machine is set to Manual mode
and you want to use the remote retrieval
features, wait about 2 minutes after it
starts ringing, and then enter the remote
access code within 30 seconds.
9
Remote fax options
Retrieving fax messages
a
Dial your fax number from a telephone
or another fax machine using touch
tone.
b
When your machine answers, enter
your remote access code (3 digits
followed by l). If you hear one long
beep, you have messages.
c
When you hear two short beeps,
press 9, 6, 2.
d
Wait for the long beep, and then use the
dial pad to enter the number (up to 20
digits) of the remote fax machine where
you want your fax messages sent to,
followed by # #.
9
Changing your Fax
Forwarding number
You can change the default setting of your fax
forwarding number from another telephone or
fax machine using touch tone.
a
Dial your fax number from a telephone
or another fax machine using touch
tone.
b
When your machine answers, enter
your remote access code (3 digits
followed by l) at once. If you hear one
long beep, you have messages.
c
When you hear two short beeps,
press 9, 5, 4.
d
Wait for the long beep, and then use the
dial pad to enter the new number (up to
20 digits) of the remote fax machine
where you want your fax messages
forwarded followed by # #.
e
Press 9, 0 to reset the machine when
you have finished.
f
Hang up after you hear your machine
beep.
Note
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
e
Press 9, 0 to reset the machine when
you have finished.
f
Hang up after you hear your machine
beep. Your machine will call the other
fax machine, which will then print your
fax messages.
Note
9
9
Note
You can insert a pause in a fax number by
using the # key.
You can insert a pause in a fax number by
using the # key.
59
Chapter 9
Remote fax commands
Follow the commands below to access features when you are away from the machine. When you
call the machine and enter your remote access code (3 digits followed by l), the system will give
two short beeps and you must enter a remote command.
Remote commands
95
Change the Fax Forwarding,
Paging or Fax Storage settings
1 OFF
You can choose Off after you have retrieved or erased all
your messages.
2 Fax Forwarding
If you hear one long beep, the change has been accepted.
If you hear three short beeps, you cannot change it because
something has not been set up (for example, registering a
Fax Forwarding number). You can register your Fax
Forwarding number by entering 4. (See Changing your Fax
Forwarding number on page 59.)
3 Paging
4 Fax Forwarding number
6 Fax Storage
96
97
Retrieve a fax
2 Retrieve all faxes
Enter the number of a remote fax machine to receive stored
fax messages. (See Retrieving fax messages on page 59.)
3 Erase faxes from the memory
If you hear one long beep, fax messages have been erased
from the memory.
Check the receiving status
1 Fax
98
Operation details
You can check whether your machine has received any
faxes. If yes, you will hear one long beep. If no, you will hear
three short beeps.
Change the Receive Mode
1 External TAD
If you hear one long beep, your change has been accepted.
2 Fax/Tel
3 Fax Only
90
60
Exit
Pressing 9, 0 allows you to exit remote retrieval. Wait for the
long beep, then replace the handset.
9
10
Printing Reports
Fax reports
10
You need to set up the Transmission
Verification Report and Journal Period using
the Menu keys.
Transmission Verification
Report
10
You can use the Transmission Report as
proof that you sent a fax. This report lists the
time and date of transmission and whether
the transmission was successful (OK). If you
choose On or On+Image, the report will print
for every fax you send.
Fax Journal (activity report)
a
b
Press Menu, 2, 4, 2.
Press a or b to choose an interval.
Press OK.
(If you choose 7 days, the LCD will ask
you to choose the first day for the 7-day
countdown.)
„ 6, 12, 24 hours, 2 or 7 days
The machine will print the report at
the chosen time and then erase all
jobs from its memory. If the
machine's memory becomes full with
200 jobs before the time you chose
has passed, the machine will print
the Journal early and then erase all
jobs from the memory. If you want an
extra report before it is due to print,
you can print it without erasing the
jobs from the memory.
When the Verification Report is turned Off or
Off+Image, the Report will only print if there
is a transmission error, with NG in the
RESULT column.
c
10
You can set the machine to print a journal at
specific intervals (every 50 faxes, 6, 12 or 24
hours, 2 or 7 days). If you set the interval to
Off, you can still print the report by following
the steps in the How to print a
report on page 62. The default setting is
Every 50 Faxes.
If you send a lot of faxes to the same place,
you may need more than the job numbers to
know which faxes you must send again.
Choosing On+Image or Off+Image will print
a section of the fax's first page on the report
to help you remember.
a
b
10
Press Menu, 2, 4, 1.
Press a or b to choose Off+Image,
On, On+Image or Off.
Press OK.
„ Every 50 Faxes
The machine will print the Journal
when the machine has stored 50
jobs.
Press Stop/Exit.
c
Enter the time to start printing in 24-hour
format.
Press OK.
(For example: enter 19:45 for 7:45 PM.)
d
Press Stop/Exit.
61
10
Chapter 10
Reports
10
The following reports are available:
1.Transmission
Prints a Transmission Verification Report
for your last transmission.
2.Help List
A help list about how to quickly program
your machine.
3.Quick-Dial
Lists names and numbers stored in the
Speed-Dial memory, in numerical order.
4.Fax Journal
Lists information about the last incoming
and outgoing faxes.
(TX: Transmit.) (RX: Receive.)
5.User Settings
Lists your settings.
6.Network Config
Prints a list of your current Network
settings.
How to print a report
a
b
10
Press Menu, 6.
Choose one of the options below:
„ Press a or b to choose the report
you want. Press OK.
„ Enter the number of the report you
want to print. For example, press 2 to
print the help list.
c
62
Press Black Start.
11
Polling
11
Polling overview
11
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else’s fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
to work. Not all fax machines support polling.
Polling receive
Setup to receive polling
Make sure you are in Fax mode
b
Press Menu, 2, 1, 6.
Setup Receive
6.Polling RX
c
d
Enter the fax number you are polling.
11
The machine can request documents from
several fax machines in one operation.
Afterwards, a Sequential Polling Report will
be printed.
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 6.
.
Setup Receive
6.Polling RX
11
Polling receive lets you call another fax
machine to receive a fax.
a
Sequential polling
c
Specify the fax machines you want to
poll by using Speed-Dial, Search, a
Group or the dial pad. You must press
OK between each location.
d
Press Black Start or Color Start.
The machine polls each number or
Group number in turn for a document.
11
.
Press Stop/Exit while the machine is dialing
to cancel the polling process.
To cancel all sequential polling receive jobs,
see Checking and canceling waiting
jobs on page 35.
11
Press Black Start or Color Start.
The LCD shows Dialing.
63
Chapter 11
Polled transmit
(Black & White only)
11
Polled Transmit is when you set up your
machine to wait with a document so another
fax machine can call and retrieve it.
Set up for polled transmit
a
Make sure you are in Fax mode
b
c
Load your document.
11
.
Press Menu, 2, 2, 6.
Setup Send
6.Polled TX
d
Press a or b to choose On (or Off).
Press OK.
e
The LCD shows:
Other Settings
1.Yes 2.No
f
Press 2 and press Black Start.
Note
The document will be stored and can be
retrieved by any other fax machine until
you delete it from the memory.
(See Checking and canceling waiting
jobs on page 35.)
64
Section III
Copy
Making copies
III
66
12
Making copies
How to copy
12
Entering Copy mode
12
Press
(Copy) to enter Copy mode. The
default setting is Fax. You can change the
number of seconds or minutes that the machine
stays in Copy mode.
(See Mode Timer on page 23.)
The LCD shows the default copy setting:
5
4
1
Copy Ratio
2
Quality
3
No of Copies
4
Paper Size
5
Paper Type
66
2
Making a single copy
a
Make sure you are in Copy mode
b
c
Load your document.
12
.
Press Black Start or Color Start.
Making multiple copies
a
Make sure you are in Copy mode
b
c
Load your document.
d
Press Black Start or Color Start.
12
.
Use the dial pad to enter the number of
copies (up to 99).
Note
Plain
Letter
100% Normal 01
1
12
3
To sort your copies, press the Options
key.
Stop copying
To stop copying, press Stop/Exit.
12
Making copies
Copy keys
12
When you want to quickly change the copy
settings temporarily for the next copy, use the
Copy keys.
(For MFC-5460CN)
(For MFC-5860CN)
To temporarily change the quality setting,
follow the instruction below:
a
Make sure you are in Copy mode
b
c
Load your document.
d
e
Press Quality.
f
The machine returns to its default settings 60
seconds after it finishes copying, or if the
mode timer returns the machine to Fax mode.
For more information see Mode
Timer on page 23.
Changing copy quality
You can choose from a range of quality
settings. The default setting is Normal.
Press Quality
and a or b
12
.
Use the dial pad to enter the number of
copies (up to 99).
Press a or b to choose Normal, Best
or Fast. Press OK.
Press Black Start or Color Start.
To change the default setting, follow the
instruction below:
a
Press Menu, 3, 1.
Copy
1.Quality
b
Press a or b to choose Normal, Best
or Fast. Press OK.
c
Press Stop/Exit.
Normal Normal is the
recommended mode
for ordinary
printouts. This
produces good copy
quality with good
copy speed.
Fast
Fast copy speed and
lowest ink
consumption. Use to
save time printing
documents to be
proof-read, large
documents or many
copies.
Best
Use best mode to
copy precise images
such as
photographs. This
provides the highest
resolution and the
slowest speed.
12
67
Chapter 12
e
Enlarging or reducing the
image copied
„ Use a or b to choose the
enlargement or reduction ratio you
want. Press OK.
12
You can choose the following enlargement or
reduction ratios:
„ Use a or b to choose
Custom(25-400%). Press OK. Use
the dial pad to enter an enlargement
or reduction ratio from 25% to 400%.
(For example, press 5, 3 to enter
53%.) Press OK.
Custom(25-400%) allows you to enter a
ratio from 25% to 400%.
Press
Enlarge/Reduce
Custom(25-400%)
f
200%
198% 4"x6"iA4
Page Layout Options 2 in 1(P), 2 in 1(L),
4 in 1(P), 4 in 1(L) or Poster are not
available with Enlarge/Reduce.
142% A5iA4
104% EXEiLTR
100%
97% LTRiA4
93% A4iLTR
83% LGLiA4
78% LGLiLTR
69% A4iA5
50%
To enlarge or reduce the next copy follow the
instruction below:
a
Make sure you are in Copy mode
b
c
Load your document.
d
Press Enlarge/Reduce.
68
Press Black Start or Color Start.
Note
186% 4"x6"iLTR
and a or b
Choose one of the options below:
.
Use the dial pad to enter the number of
copies (up to 99).
Making copies
Copy options
12
When you want to quickly change the copy
settings temporarily for the next copy, use the
Options key.
Press
Menu
selection/
Brother Photo
Important
Page
72
„ Please make sure paper size is set to
Letter or A4.
Transparency
Paper Size Letter
72
Legal
A5
„ (P) means Portrait and (L) means
Landscape.
4"(W)x 6"(H)
Brightness - nnonn +
71
- nnonn +
71
Stack/Sort Stack
„ You can only make one poster copy at a
time.
70
Sort
Off(1 in 1)
„ You cannot use the Enlarge/Reduce
setting with the N in 1 and Poster features.
„ If you are producing multiple color copies,
N in 1 copy is not available.
A4
Page Layout
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
Inkjet Paper
Options
Other Photo
Contrast
12
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
Paper Type Plain Paper
(MFC-5860CN
only)
Making N in 1 copies or a poster
69
2 in 1 (P)
2 in 1 (L)
a
Make sure you are in Copy mode
b
c
Load your document.
d
Press Options and a or b to choose
Page Layout.
Press OK.
e
Press a or b to choose Off(1 in 1),
2 in 1 (P), 2 in 1 (L),
4 in 1 (P), 4 in 1 (L) or
Poster(3 x 3).
Press OK.
f
Press Black Start to scan the
document. You can also press Color
Start if you are using Poster layout.
If you are making a poster or placed the
document in the ADF, the machine
scans the pages and starts printing.
If you are using the scanner glass, go
to step g.
4 in 1 (P)
4 in 1 (L)
Poster(3 x 3)
No. of Copies No. of Copies
: 01
(01 - 99)
Note
You can save the copy settings you use
most often by setting them as default. You
can find instructions on how to do this in
the section for each feature.
.
Use the dial pad to enter the number of
copies (up to 99).
69
12
Chapter 12
g
After the machine scans the page,
press 1 to scan the next page.
Next Page?
1.Yes 2.No
h
„ Poster (3x3)
You can make a poster size copy of a
photograph.
Place the next document on the scanner
glass. Press OK.
Repeat steps g and h for each page of
the layout.
Set Next Page
Then Press OK
i
After all the pages have been scanned,
press 2 in step g to finish.
Note
If photo paper is chosen as the paper type
setting for N in 1 copies, the images will
be printed as if plain paper had been
chosen.
Place your document face down in the
direction shown below:
„ 2 in 1 (P)
„ 2 in 1 (L)
„ 4 in 1 (P)
„ 4 in 1 (L)
70
Sorting copies using the ADF
12
You can sort multiple copies. Pages will be
stacked in the order 1 2 3, 1 2 3, 1 2 3, and so
on.
a
Make sure you are in Copy mode
b
c
Load your document.
d
Press Options and a or b to choose
Stack/Sort.
Press OK.
e
Press a or b to choose Sort.
Press OK.
f
Press Black Start or Color Start.
.
Use the dial pad to enter the number of
copies (up to 99).
Making copies
Adjusting Brightness
12
d
To temporarily change the brightness setting,
follow the instruction below:
a
Make sure you are in Copy mode
b
c
Load your document.
d
Contrast
-nnonn+
.
Use the dial pad to enter the number of
copies (up to 99).
Press a or b to make the copy lighter
or darker. Press OK.
f
Press Black Start or Color Start.
c
Press a or b to increase or decrease
the contrast.
Press OK.
f
Press Black Start or Color Start.
a
b
Press a or b to change the contrast.
Press OK.
c
Press Stop/Exit.
Adjusting Color saturation
Press Menu, 3, 2.
a
Press Stop/Exit.
12
To temporarily change the contrast setting,
follow the instruction below:
Make sure you are in Copy mode
b
c
Load your ducument.
Press Menu, 3, 4.
Copy
4.Color Adjust
Adjust the contrast to help an image look
sharper and more vivid.
a
12
The color saturation can only be changed
through the default setting.
Press a or b to make the copy lighter
or darker. Press OK.
Adjusting Contrast
Press Menu, 3, 3.
Copy
3.Contrast
To change the default setting follow the
instructions below:
a
b
e
e
e
e
To change the default setting follow the
instractions below:
Press Options and a or b to choose
Brightness.
Press OK.
Brightness
-nnonn+
Press Options and a or b to choose
Contrast.
Press OK
.
b
Press a or b to choose 1.Red,
2.Green or 3.Blue. Press OK.
c
Press a or b to change the color
saturation. Press OK.
d
Choose one of the options below:
12
„ Return to step b to choose the next
color.
„ Press Stop/Exit.
Use the dial pad to enter the number of
copies (up to 99).
71
Chapter 12
Paper options
12
(MFC-5860CN only)
If both trays are set to the same size and type
of paper, Auto will let your machine take from
Tray#1 first, then take from Tray#2 if Tray#1
runs out of paper.
Paper type
12
If you are copying on special paper, be sure
to choose the type of paper you are using so
you will get the best print quality.
a
Make sure you are in Copy mode
b
c
Load your document.
d
(MFC-5460CN)
Press Paper Type.
(MFC-5860CN)
Press Options and a or b to choose
Paper Type.
Press OK.
e
f
Press a or b to choose the type of
paper you are using (Plain Paper,
Inkjet Paper, Brother Photo,
Other Photo or Transparency).
Press OK.
Press Black Start or Color Start.
To change the default paper type setting
see Paper Type on page 23.
12
If copying on paper other than Letter or A4
size, you will need to change the paper size
setting. You can copy on Letter, Legal, A4, A5
or Photo (4"(W) × 6"(H)) paper.
a
Make sure you are in Copy mode
b
c
Load your document.
d
Press Options and a or b to choose
Paper Size.
Press OK.
e
Press a or b to choose the size of
paper you are using Letter, Legal,
A4, A5 or 4"(W)x 6"(H).
Press OK.
f
Press Black Start or Color Start.
.
Use the dial pad to enter the number of
copies (up to 99).
Note
72
Paper size
.
Use the dial pad to enter the number of
copies (up to 99).
Note
To change the default paper type setting
see Paper Size on page 24.
Tray Select (MFC-5860CN only)
12
You can change the tray that will be used for
next copy only. To change the default tray
see Tray use in Copy mode (MFC-5860CN
only) on page 25.
a
Make sure you are in Copy mode
b
c
Load your document.
d
e
Press Tray Select.
f
Press Black Start or Color Start.
.
Use the dial pad to enter the number of
copies (up to 99).
Press a or b to choose Auto Select,
#1(xxx) or #2(xxx).
Press OK.
Section IV
Walk-up Photo Printing
PhotoCapture Center®
PictBridge
74
83
IV
13
PhotoCapture Center®
PhotoCapture Center®
Operations
Printing from a media card
without a PC
13
CompactFlash®
Memory Stick Pro™
SecureDigital™
xD-Picture Card™
MultiMediaCard™
„ miniSD™ can be used with a miniSD™
adapter.
13
You can scan documents and save them
directly to a media card.
See Scan to Card on page 81.
Using PhotoCapture Center®
from your computer
Memory Stick®
13
Even if your machine is not connected to your
computer, you can print photos directly from
digital camera media. (See How to print from
a media card on page 76.)
Scanning to a media card
without a PC
13
„ Memory Stick Duo™ can be used with a
Memory Stick Duo™ adapter.
„ Memory Stick Pro Duo™ can be used with
a Memory Stick Pro Duo™ adapter.
„ Adapters are not included with the
machine. Contact a third party supplier for
adapters.
13
You can access the media card that is in the
media drive (slot) of the machine from your
PC.
The PhotoCapture Center® feature lets you
print digital photos from your digital camera at
high resolution to get photo quality printing.
Firmly put the card into the proper slot.
(See PhotoCapture Center® for Windows® or
Remote Setup & Photo Capture Center® for
Macintosh® in the Software User's Guide on
the CD-ROM.)
Using media cards
Your Brother machine includes media drives
(slots) for use with popular digital camera
media: CompactFlash®, Memory Stick®
Memory Stick Pro™, SecureDigital™,
MultiMediaCard™ and xD-Picture Card™.
74
13
1
2 3
1
CompactFlash ®
2
SecureDigital™, MultiMediaCard™
3
Memory Stick®, Memory Stick Pro™
4
xD-Picture Card™
4
PhotoCapture Center®
The Photo Capture key will light to show the
media card status. It can be on, off or blinking.
See the table below for what the light means.
„ Walk-up PhotoCapture Center ® printing
must be performed separately from
PhotoCapture Center® operations using
the PC. (Simultaneous operation is not
available.)
„ IBM Microdrive™ is not compatible with
the machine.
„ The machine can read up to 999 files
(including the folder inside media) on a
media card.
„ On
„ CompactFlash® Type II is not supported.
A media card is inserted correctly.
„ This product supports xD-Picture Card™
Type M / Type H (Large Capacity).
„ Off
Please be aware of the following:
No media card is present, or it is
incorrectly inserted.
„ When printing the INDEX or IMAGE, the
PhotoCapture Center® will print all the
valid images, even if one or more images
have been corrupted. A portion of the
corrupted image may be printed.
„ Blinking
The inserted media card is being read, or
is being written to.
„ Your machine is designed to read media
cards that have been formatted by a digital
camera.
CAUTION
DO NOT unplug the power cord or remove
the media card from the media drive (slot)
while the machine is reading or writing to
the card (the Photo Capture key is
blinking). You will lose your data or
damage the card.
The machine can only read one media card at
a time so do not put more than one card in a
slot.
Media card folder structure
13
When a digital camera formats a media
card it creates a special folder into which it
copies image data. If you need to modify
the image data stored on a media card
with your PC, we recommend that you do
not modify the folder structure created by
the digital camera. When saving new or
modified image files to the media card we
also recommend you use the same folder
your digital camera uses. If the data is not
saved to the same folder, the machine
may not be able to read the file or print the
image.
To avoid errors, remember the following
points:
„ The DPOF file on the media card must be
in a valid format. (See DPOF
printing on page 78.)
„ The image file extension must be .JPG
(Other image file extensions like .JPEG,
.TIF, .GIF and so on will not be
recognized).
75
13
Chapter 13
How to print from a
media card
Printing the thumbnail index
13
Before printing a photo you must first print a
thumbnail index to choose the number of the
photo you want to print. Follow the
instructions below to start printing directly
from your media card:
a
Make sure you have put the media card
in the proper slot. The LCD will show the
following message:
13
The PhotoCapture Center® assigns each of
your images a number. It does not recognize
any other numbers or file names that your
digital camera or PC may have assigned to
the images.
When you print a thumbnail page, it will show
all of the pictures on your media card and the
number assigned to it. Even corrupted
images may have part of the image printed.
C.Flash Active
Press PhotoCapture..
b
Press Photo Capture.
(For DPOF printing, see DPOF
printing on page 78.)
c
Press a or b to choose Print Index
and then press OK.
d
e
f
g
Press Color Start to start printing the
index sheet. Make a note of the image
number you want to print. (See Printing
the thumbnail index on page 76.)
Press a or b to choose
Print Images and then press OK.
(See Printing Images on page 77.)
a
Make sure you have put the media card
in the proper slot.
Press
(Photo Capture).
b
Press a or b to choose Print Index.
Press OK.
c
Press a or b to choose
6 Images/Line or 5 Images/Line.
Press OK.
Enter the image number and press OK.
Press Color Start to start printing.
5 Images/Line
6 Images/Line
Print time for 5 Images/Line will be
slower than 6 Images/Line, but the
quality is better.
d
76
Press Color Start to print.
PhotoCapture Center®
Printing Images
13
g
Before you can print an individual image, you
have to know the image number.
a
Make sure you have put the media card
in the proper slot.
b
Print the index first. (See Printing the
thumbnail index on page 76.)
Press
c
(Photo Capture).
If your media card contains valid DPOF
information, the LCD will show
DPOF Print:Yes. See DPOF
printing on page 78.
d
Enter the image number that you want to
print from the thumbnail index.
Press OK.
Enter & OK Key
No.:1,3,6
Multiple numbers can be entered by
using the OK key to separate numbers.
For example 1, OK, 3, OK, 6 would print
images 1, 3 and 6.
The # key can be used to print a range
of numbers, for example 1, #, 5 would
print all images from 1 to 5.
e
f
„ If you chose Letter or A4, go to
step h.
„ If you chose another size, go to
step i.
„ If you have finished choosing
settings, press Color Start.
h
Press a or b to choose the print size
(4"x3", 5"x3.5", 6"x4", 7"x5",
8"x6" or Max. Size).
Press OK.
i
Choose one of the options below:
Press a or b to choose
Print Images. Press OK.
Note
After you have chosen all the images
you want to print, press OK to choose
your settings.
If you have already chosen your
settings, press Color Start.
Press a or b to choose the paper size
you are using, Letter, A4, 4"x6" or
5"x7".
„ To choose the number of copies go
to step j.
„ If you have finished choosing
settings, press Color Start.
j
Enter the number of copies you want.
Press OK.
k
Press Color Start to print.
The printing positions when using Letter
paper are shown below.
1
4"x3"
2
5"x3.5"
3
6"x4"
13
4
7"x5"
5
8"x6"
6
Max. Size
Press a or b to choose the type of
paper you are using, Plain Paper,
Inkjet Paper, Brother Photo or
Other Photo.
Press OK.
77
Chapter 13
DPOF printing
13
f
Press a or b to choose the paper size
you are using, Letter, A4, 4"x6" or
5"x7".
Press OK.
If you chose Letter or A4, press a or b
to choose the print size you are using,
4"x3", 5"x3.5", 6"x4", 7"x5",
8"x6"or Max. Size.
Press OK.
g
Press Color Start to print.
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon
Inc., Eastman Kodak Company, Fuji Photo
Film Co. Ltd., Matsushita Electric Industrial
Co. Ltd. and Sony Corporation) created this
standard to make it easier to print images
from a digital camera.
If your digital camera supports DPOF
printing, you will be able to choose on the
digital camera display the images and
number of copies you want to print.
When the media card (CompactFlash®,
Memory Stick®, Memory Stick Pro™,
SecureDigital™ MultiMediaCard™ or
xD-Picture Card™) with DPOF information is
put into your machine, you can print the
chosen image easily.
To print directly from a media card with DPOF
information on it follow the instructions below:
a
Firmly insert the media card into the
card slot.
C.Flash Active
Press PhotoCapture..
Press
(Photo Capture).
b
Press a or b to choose
Print Images. Press OK.
c
If there is a DPOF file on the card, the
LCD will show:
Select ab & OK
DPOF Print:Yes
d
Press a or b to choose
DPOF Print:Yes. Press OK.
e
Press a or b to choose the type of
paper you are using, Plain Paper,
Inkjet Paper, Brother Photo or
Other Photo.
Press OK.
78
PhotoCapture Center®
PhotoCapture Center®
print settings
Adjusting Brightness,
Contrast and Color
These settings will remain until you change
them again.
Brightness
Print quality
a
b
a
b
c
c
c
Press a or b to make a darker or lighter
copy.
Press OK.
Press Stop/Exit.
13
13
13
Press a or b to choose Plain Paper,
Inkjet Paper, Brother Photo or
Other Photo.
Press OK.
a
b
c
Press Menu, 4, 5.
Press a or b to increase or decrease
the contrast.
Press OK.
Press Stop/Exit.
Color enhancement (True2Life®)
13
®
The color enhancement (True2Life ) feature
will produce more vivid printed images. Your
photographs will take slightly longer to print.
Press Stop/Exit.
Press a or b to choose the paper size
you are using, Letter, A4, 4"x6" or
5"x7".
Press OK.
If you chose Letter or A4, press a or b
to choose the print size you are using,
4"x3", 5"x3.5", 6"x4", 7"x5",
8"x6" or Max. Size.
Press OK.
Press Menu, 4, 4.
You can choose the contrast setting. More
contrast will make an image look sharper and
more vivid.
Press Menu, 4, 2.
Press Menu, 4, 3.
13
Contrast
Press Stop/Exit.
Paper Size
a
b
c
Press a or b to choose Normal or
Photo.
Press OK.
Paper Type
a
b
13
Press Menu, 4, 1.
Paper Options
13
13
13
a
b
Press Menu, 4, 6.
Press a or b to choose On or Off.
Press OK.
If you chose Off, then go to step e.
13
c
Press a or b to choose
1.White Balance, 2.Sharpness or
3.Color Density.
Press OK.
d
Press a or b to adjust the degree of the
setting.
Press OK.
e
Press Stop/Exit.
Press Stop/Exit.
79
Chapter 13
Note
• White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will effect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other color. By using this, you can
correct this effect and bring the white
areas back to pure white.
Cropping
If your photo is too long or wide to fit the
available space on your chosen layout, part
of the image will be automatically cropped.
The default setting is On. If you want to print
the whole image, turn this setting to Off.
a
b
• Sharpness
This setting adjusts the total amount of
color in the image. You can increase or
decrease the amount of color in an image
to improve a washed out or weak picture.
Press Menu, 4, 7.
Press a or b to choose Off (or On).
Press OK.
Press Stop/Exit.
Cropping: On
Cropping: Off
Borderless printing
This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
a
b
c
80
13
/////////////////////////////////////////
• Color Density
c
/////////////////////////////////////////
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
13
Press Menu, 4, 8.
Press a or b to choose Off (or On).
Press OK.
Press Stop/Exit.
13
13
PhotoCapture Center®
e
Scan to Card
13
You can scan black & white and color
documents into a media card. Black & white
documents will be stored in PDF(*.PDF) or
TIFF file formats (*.TIF). Color documents
may be stored in PDF (*.PDF) or JPEG
(*.JPG) file formats. The default setting is
Color 150 dpi and the default file format
is PDF. File names default to the current date
that you set using the control panel keys. (For
details, see the Quick Setup Guide.) For
example, the fifth image scanned on July 1,
2006 would be named 07010506.PDF. You
can change the color, quality and file name.
Quality
„ To start scanning press Black Start
or Color Start.
f
B/W 200 dpi
TIFF / PDF
PDF / JPEG
Color 300 dpi
PDF / JPEG
Color 600 dpi
PDF / JPEG
Insert a CompactFlash®, Memory
Stick®, Memory Stick Pro™,
SecureDigital™, MultiMediaCard™ or
xD-Picture Card™ into your machine.
„ To start scanning press Black Start
or Color Start.
g
b
Load your document.
c
Press
d
Press a or b to choose
Scan to Card, choose one of the
options below:
(Scan).
The file name is set automatically.
However, you can set a name of your
choice using the dial pad. You can only
change the first 6 digits. Press
Black Start or Color Start.
Changing the image quality
a
b
WARNING
Do not take out the media card while
Photo Capture is blinking to avoid
damaging the card or data stored on the card.
Press a or b to choose the file type,
choose one of the options below:
„ To change the file name press OK
and go to step g.
TIFF / PDF
Color 150 dpi
a
„ To change the file type press OK and
go to step f.
File format
B/W 200x100 dpi
Press a or b to choose the quality,
choose one of the options below:
c
13
Press Menu, 4, 9, 1.
Press a or b to choose
B/W 200x100 dpi, B/W 200 dpi,
Color 150 dpi, Color 300 dpi or
Color 600 dpi.
Press OK.
Press Stop/Exit.
Changing the black & white
file format
a
b
c
13
Press Menu, 4, 9, 2.
Press a or b to choose TIFF or PDF.
Press OK.
Press Stop/Exit.
„ To change the quality press OK and
go to step e.
„ To start scanning press Black Start
or Color Start.
81
13
Chapter 13
Changing the color file format
13
a
b
c
Press Menu, 4, 9, 3.
Press a or b to choose PDF or JPEG.
Press OK.
Press Stop/Exit.
Understanding the
Error Messages
13
Once you are familiar with the types of errors
that can occur while you are using the
PhotoCapture Center®, you can easily
identify and troubleshoot any problems.
„ Media Error
This message will appear if you put in a
media card that is either bad or not
formatted, or when there is a problem with
the media drive. To clear this error, take
out the media card.
„ No File
This message will appear if you try to
access a media card in the drive (slot) that
does not contain a .JPG file.
„ Out of Memory
This message will appear if you are
working with images that are too large for
the machine's memory.
82
14
PictBridge
14
Your Brother machine supports the
PictBridge standard, allowing you to connect
to and print photos directly from any
PictBridge compatible digital camera.
Before Using
PictBridge
PictBridge requirements
Letter, A4, 4"×6", Printer
Settings (Default setting) 2
Paper Type
Plain Paper, Glossy
Paper, Inkjet Paper,
Layout
Borderless: On,
Borderless: Off, Printer
Settings (Default setting) 2
DPOF setting 1
-
Print Quality
Normal, Fine, Printer
14
Settings (Default setting) 2
14
„ The image file extension must be .JPG
(Other image file extensions like .JPEG,
.TIF, .GIF and so on will not be
recognized).
„ PhotoCapture Center® operations are not
available when using the PictBridge
feature.
Make sure your camera is in PictBridge
mode. The following PictBridge settings may
be available from the LCD of your PictBridge
compatible camera.
Paper Size
setting) 2
„ The machine and the digital camera must
be connected using a suitable USB cable.
Setting your digital camera
Options
Printer Settings (Default
To avoid errors, remember the following
points:
Using PictBridge
Camera Menu
Selections
14
14
Color
Enhancement
On, Off, Printer Settings
(Default setting) 2
1
See DPOF printing on page 84 for more details.
2
If your camera is set to use the Printer Settings
(Default setting), the machine will print your photo
using the settings below.
Settings
Options
Paper Size
4"×6"
Paper Type
Glossy Paper
Layout
Borderless: On
Print Quality
Fine
Color Enhancement
Off
„ The names and availability of each setting
depends on the specification of your
camera.
Please refer to the documentation supplied
with your camera for more detailed
information on changing PictBridge settings.
Depending on your camera some of these
settings may not be available.
83
14
Chapter 14
Printing Images
a
14
Make sure that your camera is turned
off. Connect your camera to the
PictBridge port on the machine using
the USB cable.
DPOF printing
14
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon
Inc., Eastman Kodak Company, Fuji Photo
Film Co. Ltd., Matsushita Electric Industrial
Co. Ltd. and Sony Corporation) created this
standard to make it easier to print images
from a digital camera.
If your digital camera supports DPOF
printing, you will be able to choose on the
digital camera display the images and
number of copies you want to print.
Understanding the
Error Messages
1
1
PictBridge port
Note
Remove any media cards from the
machine before connecting the digital
camera.
b
„ Out of Memory
This message will appear if you are
working with images that are too large for
the machine's memory.
„ Wrong USB device
Turn on the camera.
When the machine has recognized the
camera, the LCD shows the following
message:
Camera Connected
When the machine starts printing a
photo, the LCD will show Printing.
WARNING
To prevent damage to your machine, do not
connect any device other than a PictBridge
compatible camera to the PictBridge port.
84
Once you are familiar with the types of errors
that can occur while you are using the
PictBridge, you can easily identify and
troubleshoot any problems.
This message will appear if you connect a
non-PictBridge compatible or broken
device to the PictBridge port. To clear the
error, unplug the device from the
PictBridge port, then press On/Off to turn
the machine off and then on again.
(See Error messages on page 105 for the
detailed solution.)
14
Section V
Software
Software and Network features
V
86
15
Software and Network features
The CD-ROM includes the Software User’s
Guide and Network User’s Guide for features
available when connected to a computer (for
example, printing and scanning). The guide
has easy to use links that, when clicked, will
take you directly to a particular section.
c
15
Click the heading you would like to read
from the list at the left of the window.
You can find information on these features:
„
„
„
„
„
„
„
„
„
Printing
Scanning
ControlCenter3 (for Windows®)
ControlCenter2 (for Macintosh®)
Remote Setup
Faxing from your computer
PhotoCapture Center®
Network Printing
Network Scanning
How to read the HTML User’s Guide
This is a quick reference for how to access
the HTML User’s Guide.
(For Macintosh®)
a
Make sure your Macintosh® is turned
on. Insert the Brother CD-ROM into your
CD-ROM drive.
b
c
Double-click the Documentation icon.
d
Click SOFTWARE USER’S GUIDE (or
NETWORK USER’S GUIDE) in the top
menu, and then click the heading you
would like to read from the list at the left
of the window.
(For Windows®)
Note
If you have not installed the software, see
Viewing Documentation on page 3.
a
From the Start menu, point to Brother,
MFC-XXXX (where XXXX is your model
number) from the programs group, then
click User’s Guide.
b
Click SOFTWARE USER’S GUIDE (or
NETWORK USER’S GUIDE) from the
top menu.
86
Double-click your language folder, and
then double-click the top page file.
Section VI
Appendixes
Safety and Legal
Troubleshooting and Routine Maintenance
Menu and Features
Specifications
Glossary
VI
88
99
122
133
144
A
Safety and Legal
Choosing a location
Put your machine on a flat, stable surface that is free of vibration and shocks, such as a desk. Put
the machine near a telephone wall jack and a standard AC power outlet. Choose a location where
the temperature remains between 50° F and 95° F (10° and 35° C).
CAUTION
• Avoid placing your machine in a high-traffic area.
• Avoid placing your machine on a carpet.
• DO NOT put the machine near heaters, air conditioners, refrigerators, medical equipment,
chemicals or water.
• DO NOT expose the machine to direct sunlight, excessive heat, moisture, or dust.
• DO NOT connect your machine to electrical outlets controlled by wall switches or automatic
timers.
• Disruption of power can wipe out information in the machine's memory.
• Do not connect your machine to electrical outlets on the same circuit as large appliances or
other equipment that might disrupt the power supply.
• Avoid interference sources, such as speakers or the base units of non-Brother cordless
phones.
88
A
A
Safety and Legal
To use the machine safely
A
Please keep these instructions for later reference and read them before attempting any
maintenance.
WARNING
There are high voltage electrodes inside the machine. Before you clean the inside of the
machine, make sure you have unplugged the telephone line cord first and then the power cord
from the AC power outlet. Doing this will prevent an electrical shock.
DO NOT handle the plug with wet hands. Doing this may cause an electrical shock.
Always make sure the plug is fully inserted.
DO NOT pull in the middle of the AC power cord. Doing this may cause an electrical shock.
89
DO NOT put your hands on the edge of the machine under the document cover or the scanner
cover. Doing this may cause injury.
DO NOT touch the paper feed roller. Doing this may cause injury.
90
Safety and Legal
DO NOT touch the area shaded in the illustration. Doing this may cause injury.
When moving the machine you must lift it from the base, by placing a hand at each side of the
unit as shown in the illustration. Do not carry the machine by holding the scanner cover.
If the machine becomes hot, releases smoke, or generates any strong smells, immediately
unplug the machine from the AC power outlet. Call Brother Customer Service. (See Brother
numbers on page i.)
If metal objects, water or other liquids get inside the machine, immediately unplug the machine
from the AC power outlet. Call Brother Customer Service. (See Brother numbers on page i.)
91
WARNING
• Use caution when installing or modifying telephone lines. Never touch telephone wires or
terminals that are not insulated unless the telephone line has been unplugged at the wall
jack. Never install telephone wiring during a lightning storm. Never install a telephone wall
jack in a wet location.
• This product must be installed near an AC power outlet that is easily accessible. In case of
an emergency, you must unplug the power cord from the AC power outlet to shut off the
power completely.
• Always make sure the plug is fully inserted.
• To reduce the risk of shock or fire, use only a No. 26 AWG or larger telecommunication line
cord.
CAUTION
Lightning and power surges can damage this product! We recommend that you use a quality
surge protection device on the AC power line and on the telephone line, or unplug the cords
during a lightning storm.
WARNING
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to people, including the following:
1 DO NOT use this product near water, for example, near a bath tub, wash bowl, kitchen sink
or washing machine, in a wet basement or near a swimming pool.
2 Avoid using this product during an electrical storm. There may be a remote risk of electric
shock from lightning.
3 DO NOT use this product to report a gas leak in the vicinity of the leak.
4 Use only the power cord provided with the machine.
92
Safety and Legal
Important safety instructions
A
1 Read all of these instructions.
2 Save them for later reference.
3 Follow all warnings and instructions marked on the product.
4 Unplug this product from the wall outlet before cleaning the inside of the machine. Do not use
liquid or aerosol cleaners. Use a damp cloth for cleaning.
5 Do not use this product near water.
6 Do not place this product on an unstable cart, stand, or table. The product may fall, causing
serious damage to the product.
7 Slots and openings in the cabinet and the back or bottom are provided for ventilation. To
ensure reliable operation of the product and to protect it from overheating, these openings
must not be blocked or covered. The openings should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface. This product should never be placed near or over
a radiator or heater. This product should never be placed in a built-in installation unless proper
ventilation is provided.
8 This product should be operated from the type of power source indicated on the label. If you
are not sure of the type of power available, call your dealer or local power company.
9 Use only the power cord supplied with this machine.
10 This product is equipped with a 3-wire grounded plug, a plug having a third (grounded) pin.
This plug will only fit into a grounded power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, call your electrician to replace your obsolete outlet. Do not defeat
the purpose of the grounded plug.
11 Do not allow anything to rest on the power cord. Do not place this product where people can
walk on the cord.
12 If an extension cord is used with this product, make sure that the total ampere ratings of the
products plugged into the extension cord do not exceed the extension cord ampere rating.
Also, make sure that the total of all products plugged into the AC power outlet does not exceed
15 amperes (USA only).
13 Do not place anything in front of the machine that will block received faxes. Do not place
anything in the path of received faxes.
14 Wait until pages have exited the machine before picking them up.
15 Never push objects of any kind into this product through cabinet slots, since they may touch
dangerous voltage points or short out parts resulting in the risk of fire or electric shock. Never
spill liquid of any kind on the product. Do not attempt to service this product yourself because
opening or removing covers may expose you to dangerous voltage points and other risks and
may void your warranty. Refer all servicing to a Brother Authorized Service Center. For the
location of your nearest Brother Authorized Service Center, please call the following:
In USA: 1-800-284-4357
In Canada: 1-877-BROTHER
(See Brother numbers on page i.)
93
16 Unplug this product from the AC power outlet and refer all servicing to Brother Authorized
Service Personnel under the following conditions:
„ When the power cord is damaged or frayed.
„ If liquid has been spilled into the product.
„ If the product has been exposed to rain or water.
„ If the product does not operate normally when the operating instructions are followed,
adjust only those controls that are covered by the operating instructions. Improper
adjustment of other controls may result in damage and will often require extensive work by
a qualified technician to restore the product to normal operation.
„ If the product has been dropped or the cabinet has been damaged.
„ If the product exhibits a distinct change in performance, indicating a need for service.
17 To protect your product against power surges, we recommend the use of a power protection
device (Surge Protector).
18 To reduce the risk of fire, electric shock and injury to people, note the following:
„ Do not use this product near appliances that use water, a swimming pool, or in a wet
basement.
„ Do not use the machine during an electrical storm (there is the remote possibility of an
electrical shock) or to report a gas leak in the vicinity of the leak.
19 Caution - To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord.
Standard telephone and FCC Notices (These notices are in effect
on models sold and used in the United States only.)
When programming emergency numbers or making test calls to emergency numbers:
„ Remain on the line and briefly explain to the dispatcher the reason for the call before hanging
up.
„ Perform these activities in the off-peak hours, such as early morning or late evening.
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
ACTA. On the backside of this equipment is a label that contains, among other information, a
product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided
to the telephone company.
You may safely connect this equipment to the telephone line by means of a standard modular jack,
USOC RJ11C.
A plug and jack used to connect this equipment to the premises wiring and telephone network
must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See installation instructions for
details.
94
A
Safety and Legal
The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an
incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be
certain of the number of devices that may be connected to a line, as determined by the total RENs,
contact the local telephone company. For products approved after July 23, 2001, the REN for this
product is part of the product identifier that has the format US:AAAEQ##TXXXX.The digits
represented by ## are the REN without a decimal point (e.g., 06 is a REN of 0.6). For earlier
products, the REN is separately shown on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn't
practical, the telephone company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures
that could affect the operation of the equipment. If this happens the telephone company will
provide advance notice in order for you to make necessary modifications to maintain uninterrupted
service.
If trouble is experienced with this equipment, for repair or warranty information, please contact
Brother Customer Service. (See Brother numbers on page i.) If the equipment is causing harm to
the telephone network, the telephone company may request that you disconnect the equipment
until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the state public utility
commission, public service commission or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure the
installation of this equipment does not disable your alarm equipment. If you have questions about
what will disable alarm equipment, call your telephone company or a qualified installer.
If you are not able to solve a problem with your machine, call Brother Customer Service. (See
Brother numbers on page i.)
WARNING
For protection against the risk of electrical shock, always disconnect all cables from the wall
outlet before servicing, modifying or installing the equipment.
This equipment may not be used on coin service lines provided by the telephone company or
connected to party lines.
Brother cannot accept any financial or other responsibilities that may be the result of your use
of this information, including direct, special or consequential damages. There are no warranties
extended or granted by this document.
This machine has been certified to comply with FCC standards, which are applied to the USA
only.
95
Federal Communications Commission (FCC) Declaration of
Conformity (USA only)
Responsible Party:
A
Brother International Corporation
100 Somerset Corporate Boulevard
Bridgewater, NJ 08807-0911 USA
TEL: (908) 704-1700
declares, that the products
Product Name: MFC-5460CN, MFC-5860CN
comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
„ Reorient or relocate the receiving antenna.
„ Increase the separation between the equipment and receiver.
„ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
„ Call the dealer or an experienced radio/TV technician for help.
IMPORTANT
Changes or modifications not expressly approved by Brother Industries, Ltd. could void the
user's authority to operate the equipment.
Industry Canada Compliance Statement (Canada only)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
96
A
Safety and Legal
LAN connection
A
CAUTION
DO NOT connect this product to a LAN connection that is subject to over-voltages.
Legal limitations for copying
A
Color reproductions of certain documents are illegal and may result in either criminal or civil
liability. This memorandum is intended to be a guide rather than a complete listing of every
possible prohibition. In case of doubt, we suggest that you check with counsel as to any particular
questionable documents.
The following documents issued by the United States/Canadian Government or any of its
Agencies may not be copied:
„ Money
„ Bonds or other certificates of indebtedness
„ Certificates of Deposit
„ Internal Revenue Stamps (canceled or uncanceled)
„ Selective Service or draft papers
„ Passports
„ United States/Canadian Postage Stamps (canceled or uncanceled)
„ Food Stamps
„ Immigration Papers
„ Checks or drafts drawn by Governmental agencies
„ Identifying badges or insignias
Copyrighted works cannot be copied. Sections of a copyrighted work can be copied for ‘fair use.’
Multiple copies would indicate improper use.
Works of art should be considered the equivalent of copyrighted works.
Licenses and Certificates of Title to motor vehicles may not be copied under certain
state/provincial laws.
97
Trademarks
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
Multi-Function Link is a registered trademark of Brother International Corporation.
© 2006 Brother Industries, Ltd. All rights reserved.
Windows and Microsoft are registered trademarks of Microsoft in the U.S. and other countries.
Macintosh and TrueType are registered trademarks of Apple Computer, Inc.
PaperPort is a registered trademark of ScanSoft, Inc.
Presto! PageManager is a registered trademark of NewSoft Technology Corporation.
Microdrive is a trademark of International Business Machine Corporation.
CompactFlash is a registered trademark of SanDisk Corporation.
Memory Stick is a registered trademark of Sony Corporation.
SecureDigital is a trademark of Matsushita Electric Industrial Co. Ltd., SanDisk Corporation and
Toshiba Corporation.
SanDisk is a licensee of the SD and miniSD trademarks.
MultiMediaCard is a trademark of Infineon Technologies and licensed to the MultiMediaCard
Association.
xD-Picture Card is a trademark of Fujifilm Co. Ltd., Toshiba Corporation and Olympus Optical Co.
Ltd.
PictBridge is a trademark.
Memory Stick Pro, Memory Stick Pro Duo, Memory Stick Duo and MagicGate are trademarks of
Sony Corporation.
Each company whose software title is mentioned in this manual has a Software License
Agreement specific to its proprietary programs.
All other brand and product names mentioned in this User's Guide, the Software User's
Guide, and the Network User’s Guide are registered trademarks of their respective
companies.
98
A
B
Troubleshooting and Routine
Maintenance
B
Troubleshooting
B
IMPORTANT
For technical help, you must call the country where you bought the machine. Calls must be made
from within that country.
If you think there is a problem with your machine, check the chart below and follow the
troubleshooting tips.
Most problems can be easily resolved by yourself. If you need additional help, the Brother
Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at
http://solutions.brother.com.
If you are having difficulty with your machine
B
Printing
Difficulty
Suggestions
No printout
Check the interface cable connection on both the machine and your computer.
(See the Quick Setup Guide.)
Check that the machine is plugged in and that the On/Off key is on.
One or more ink cartridges are empty. (See Replacing the ink
cartridges on page 113.)
Check to see if the LCD is showing an error message. (See Error
messages on page 105.)
Check that the correct printer driver has been installed and chosen.
Make sure the machine is online. Click Start and then Printers and Faxes.
Right-click and choose ‘Brother MFC-XXXX’ (where XXXX is your model name),
and make sure that ‘Use Printer Offline’ is unchecked.
99
Printing (Continued)
Difficulty
Suggestions
Poor print quality
Check the print quality. (See Checking the print quality on page 118.)
Make sure that the Printer Driver or Paper Type setting in the menu matches the
®
type of paper you are using. (See Printing for Windows or Printing and Faxing
for Macintosh® in the Software User’s Guide on the CD-ROM and Paper
Type on page 23.)
Make sure that your ink cartridges are fresh. The following may cause ink to clog:
„ The expiration date written on the cartridge package has passed. (Cartridges
stay usable for up to two years if kept in their original packaging.)
„ The ink cartridge was in your machine over six months.
„ The ink cartridge may not have been stored properly before use.
Try using the recommended types of paper. (See Acceptable paper and other
media on page 12.)
The recommended environment for your machine is between 68° F to 91° F
(20° C to 33° C).
White horizontal lines appear in
text or graphics.
Clean the print head. (See Cleaning the print head on page 117.)
The machine prints blank pages.
Clean the print head. (See Cleaning the print head on page 117.)
Characters and lines are stacked.
Check the printing alignment. (See Checking the printing alignment on page 119.)
Printed text or images are skewed.
Make sure the paper is loaded properly in the paper tray and the paper side guide
is adjusted correctly. (See Loading paper and other media on page 16.)
Try using the recommended types of paper. (See Acceptable paper and other
media on page 12.)
Make sure the Jam Clear Cover is set properly.
Smudged stain at the top center of
the printed page.
Make sure the paper is not too thick or curled. (See Acceptable paper and other
media on page 12.)
Printing appears dirty or ink seems
to run.
Make sure you are using the proper types of paper. (See Acceptable paper and
other media on page 12.) Don't handle the paper until the ink is dry.
Stains appear on the reverse side
or at the bottom of the page.
Make sure the printer platen is not dirty with ink. (See Cleaning the machine printer
platen on page 116.)
Make sure you are using the paper support flap. (See Loading paper and other
media on page 16.)
There are some dense lines.
Check Reverse Order in the Basic tab of the printer driver.
The printouts are wrinkled.
In the printer driver Basic tab, click the Settings, and uncheck the
Bi-Directional Printing.
Cannot perform ‘2 in 1 or 4 in 1’
printing.
Check that the paper size setting in the application and in the printer driver are the
same.
Print speed is too slow.
Try changing the printer driver setting. The highest resolution needs longer data
processing, sending and printing time. Try the other quality settings in the printer
driver Basic tab. Also, click the Settings tab, and make sure you uncheck
Color Enhancement (True2Life®).
Turn the borderless feature off. Borderless printing is slower than normal printing.
®
®
(See Printing for Windows or Printing and Faxing for Macintosh in the Software
User’s Guide on the CD-ROM.)
100
Troubleshooting and Routine Maintenance
Printing (Continued)
Difficulty
Suggestions
Machine feeds multiple pages
Make sure the paper is loaded properly in the paper tray. (See Loading paper and
other media on page 16.)
Check that more than two types of paper are not loaded in the paper tray at any
one time.
Printed pages are not stacked
neatly.
Make sure you are using the paper support flap. (See Loading paper and other
media on page 16.)
Printed pages double-feed and
cause a paper jam.
Make sure you pull out the paper support until it clicks and unfold the paper
support flap.
Machine does not print from Paint
Brush.
Try setting the Display setting to ‘256 colors.’
Machine does not print from Adobe
Illustrator.
®
Try to reduce the print resolution. (See Printing for Windows or Printing and
Faxing for Macintosh® in the Software User’s Guide on the CD -ROM.)
The machine cannot print full
pages of a document.
®
Reduce the printing resolution. (See Printing for Windows or Printing and Faxing
for Macintosh® in the Software User’s Guide on the CD -ROM.)
Out of Memory message
occurs.
Reduce the complexity of your document and try again. Reduce the graphic
quality or the number of font sizes within your application software.
Printing Received Faxes
Difficulty
Suggestions
Condensed print and white streaks
across the page or the top and
bottom of sentences are cut off.
You probably had a bad connection, with static or interference on the telephone
line. Ask the other party to send the fax again.
Vertical black lines when receiving.
The sender's scanner may be dirty. Ask the sender to make a copy to see if the
problem is with the sending machine. Try receiving from another fax machine.
Received color fax prints only in
black and white.
Replace the color ink cartridges that are empty or nearly empty, and then ask the
other person to send the color fax again. (See Replacing the ink
cartridges on page 113.)
Left and Right margins are cut off or
a single page is printed on two
pages.
Turn on Auto Reduction. (See Printing a reduced incoming fax on page 40.)
Phone Line or Connections
Difficulty
Suggestions
Dialing does not work. (No dial
tone)
Check that the machine is plugged in and switched on.
Check all line cord connections.
(Canada only) Change Tone/Pulse setting. (See the Quick Setup Guide.)
If an external phone is connected to the machine, send a manual fax by lifting the
handset of the external phone and dialing the number. Wait to hear fax receiving
tone before pressing Black Start or Color Start.
101
Phone Line or Connections (Continued)
Difficulty
Suggestions
The machine does not answer
when called.
Check all line cord connections.
Make sure the machine is in the correct receiving mode for your setup.
(See Choosing the Receive Mode on page 37.) Check for a dial tone. If possible,
call your machine to hear it answer. If there is still no answer, check the telephone
line cord connection. If there is no ringing when you call your machine, ask your
telephone company to check the line.
Receiving Faxes
Difficulty
Suggestions
Cannot receive a fax
Check all line cord connections.
Make sure the machine is in the correct receiving mode for your setup.
(See Receive modes on page 37.)
If you often have interference on the phone line, try changing the menu setting of
Compatibility to Basic or Normal. (See Phone line interference on page 112.)
Sending Faxes
Difficulty
Suggestions
Cannot send a fax
Check all line cord connections.
Make sure that the Fax
key is illuminated.
(See Entering Fax mode on page 30.)
Ask the other party to check that the receiving machine has paper.
Print the Transmission Verification Report and check for an error.
(See Reports on page 62.)
Transmission Verification Report
says ‘Result:NG’ or
‘Result:ERROR’.
There is probably temporary noise or static on the line. Try sending the fax again.
If you send a PC FAX message and get ‘Result:NG’ on the Transmission
Verification Report, your machine may be out of memory. If the problem continues,
ask the telephone company to check your phone line.
If you often get transmission errors due to possible interference on the phone line,
try changing the menu setting of Compatibility to Basic or Normal. (See Phone
line interference on page 112.)
Poor fax send quality.
Try changing your resolution to Fine or S.Fine. Make a copy to check your
machine's scanner operation. If the copy quality is not good, clean the scanner.
(See Cleaning the scanner on page 116.)
Vertical black lines when sending.
If the copy you made shows the same problem, clean the scanner. (See Cleaning
the scanner on page 116)
Handling Incoming Calls
Difficulty
Suggestions
The machine ‘Hears’ a voice as a
CNG Tone.
If Easy Receive is set to on, your machine is more sensitive to sounds. It may
mistakenly interpret certain voices or music on the line as a fax machine calling
and respond with fax receiving tones. Deactivate the machine by pressing
Stop/Exit. Try avoiding this problem by turning Easy Receive to off. (See Easy
Receive on page 39.)
102
Troubleshooting and Routine Maintenance
Handling Incoming Calls (Continued)
Difficulty
Suggestions
Sending a fax call to the machine.
If you answered at the machine, press Black Start and hang up at once. If you
answered on an external or extension phone, press your Fax Receive Code
(default setting is l51). When your machine answers, hang up.
Custom features on a single line.
If you have Call Waiting, Call Waiting/Caller ID, Voice Mail, an alarm system or
other custom feature on a single phone line with your machine, it may create a
problem sending or receiving faxes.
For example: If you subscribe to Call Waiting or some other custom service and
its signal comes through the line while your machine is sending or receiving a fax,
the signal can temporarily interrupt or disrupt the faxes. Brother's ECM feature
should help overcome this problem. This condition is related to the telephone
system industry and is common to all devices that send and receive information
on a single, shared line with custom features. If avoiding a slight interruption is
crucial to your business, a separate phone line with no custom features is
recommended.
Menu Setting Difficulties
Difficulty
Suggestions
The machine beeps when you try to
access the Setup Receive menu.
If the Fax
key is not illuminated, press it to turn on Fax mode. The Setup
Receive setting is available only when the machine is in Fax mode.
Copying Difficulties
Difficulty
Cannot make a copy
Suggestions
Make sure that the Copy
key is illuminated. (See Entering Copy
mode on page 66.)
Vertical streaks appear in copies
If you see vertical streaks on copies, clean the scanner. (See Cleaning the
scanner on page 116.)
Poor copy results when using the
ADF.
Try using the scanner glass. (See Using the scanner glass on page 11.)
Scanning Difficulties
Difficulty
Suggestions
TWAIN/WIA errors appear while
scanning.
Make sure the Brother TWAIN/WIA driver is chosen as the primary source. In
Poor scanning results when using
the ADF.
Try using the scanner glass. (See Using the scanner glass on page 11.)
PaperPort® SE with OCR, click File, Scan and choose the Brother TWAIN/WIA
driver.
Software Difficulties
Difficulty
Suggestions
Cannot install software or print
Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair
and reinstall the software.
‘Device Busy’
Make sure the machine is not showing an error message on the LCD.
103
PhotoCapture Center® Difficulties
Difficulty
Suggestions
Removable Disk does not work
properly.
1
Have you installed the Windows® 2000 update? If not, do the following:
1) Unplug the USB cable.
2) Install the Windows® 2000 update, and see the Quick Setup Guide. After
the installation the PC will be automatically restarted.
3) Wait about 1 minute after you restart the PC, and then connect the USB
cable.
Cannot access Removable Disk
from Desktop icon.
2
Take out the media card and put it back in again.
3
If you have tried ‘Eject’ from within Windows®, take out the media card before
you continue.
4
If an error message appears when you try to eject the media card, it means
the card is being accessed. Wait a while and then try again.
5
If all of the above do not work, turn off your PC and machine, and then turn
them on again. (You will have to unplug the power cord of the machine to turn
it off.)
Make sure you have put the media card into the media slot.
Network Difficulties
Difficulty
Suggestions
Cannot print over the Network.
Make sure that your machine is powered on and is online and in Ready mode.
Print a Network Configuration list (see Reports on page 62.) and check the current
Network settings printed in this list. Reconnect the LAN cable to the hub to verify
that the cabling and network connections are good. If possible, try connecting the
machine to a different port on your hub using a different cable. If the connections
are good, the machine shows LAN Active for 2 seconds.
(If you are having Network problems, see the Network User’s Guide on the
CD -ROM for more information.)
The network scanning feature does
not work.
The network PC-Fax Receive
feature does not work.
®
(For Windows users only) Firewall setting on your PC may be rejecting the
necessary network connection. Follow the instructions below to configure the
Firewall. If you are using a personal Firewall software, see the User’s Guide for
your software or contact the software manufacturer.
<Windows® XP SP2 users>
1
Click the Start button, Settings, Control Panel and then Windows Firewall.
Make sure that Windows Firewall on the Basic tab is set to On.
2
Click the Exceptions tab and Add port button.
3
Enter any name, port number (54295 for network scanning and 54926 for
Network PC-Fax receiving), choose UDP and click OK.
4
Make sure if the new setting is added and is checked, and then click OK.
For Windows® XP SP1 user’s, please visit the Brother Solutions Center.
104
Troubleshooting and Routine Maintenance
Network Difficulties (Continued)
Difficulty
Suggestions
Your computer cannot find your
machine.
<Windows® users>
Firewall setting on you PC may be rejecting the necessary network connection.
For detail, see the instruction above.
<Macintosh® users>
Re-select your machine in the DeviceSelector application located in Macintosh
HD/Library/Printers/Brother/Utilities or from the model of ControlCenter2.
Error messages
B
As with any sophisticated office product, errors may occur. If this happens, your machine identifies
the error and shows an error message. The most common error messages are shown below.
You can correct most errors by yourself. If you need more help, the Brother Solutions Center offers
the latest FAQs and troubleshooting tips.
Visit us at http://solutions.brother.com.
Error Message
Cause
Action
Change Unable XX
The machine has a mechanical
problem.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, see Transferring your faxes or Fax
Journal report on page 108 before disconnecting
the machine so you will not lose any important
messages. Then, disconnect the machine from
the power for several minutes and then reconnect
it.
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
Clean Unable XX
The machine has a mechanical
problem.
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, see Transferring your faxes or Fax
Journal report on page 108 before disconnecting
the machine so you will not lose any important
messages. Then, disconnect the machine from
the power for several minutes and then reconnect
it.
Comm.Error
Poor phone line quality caused a
communication error.
Send the fax again or connect the machine to
another telephone line. If the problem continues,
call the telephone company and ask them to
check your phone line.
Cover is Open
The scanner cover is not closed
completely.
Lift the scanner cover and then close it again.
The ink cartridge cover is not
completely closed.
Firmly close the ink cartridge cover until it clicks.
105
Error Message
Cause
Data Remaining Print data is left in the machine's
memory.
Action
Re-start printing from your computer.
Print data is left in the machine's
memory. The USB cable was
unplugged while the computer was
sending the data to the machine.
Press Stop/Exit. The machine will cancel the job
and clear it from the memory. Try to print again.
Disconnected
The other person or other person's
fax machine stopped the call.
Try to send or receive again.
Document Jam
The document was not inserted or
fed properly, or the document
scanned from the ADF was too
long.
See Using the ADF on page 10.
DR Mode in Use
The machine is set to Distinctive
Ring mode. You cannot change the
Receive Mode from Manual to
another mode.
Set Distinctive Ring to off. (See Turning off
Distinctive Ring on page 43.)
High Temperature
The print head is too warm.
Allow the machine to cool down.
Init. Unable XX The machine has a mechanical
problem.
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
See Document jam on page 109.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, see Transferring your faxes or Fax
Journal report on page 108 before disconnecting
the machine so you will not lose any important
messages. Then, disconnect the machine from
the power for several minutes and then reconnect
it.
Ink Empty
One or more of the ink cartridges is
empty. The machine will stop all
print operations. While memory is
available, black and white faxes will
be stored in the memory. If a
sending machine has a color fax,
the machine's ‘handshake’ will ask
that the fax be sent as black and
white. If the sending machine has
the ability to convert it, the color fax
will be stored in the memory as a
black and white fax.
Replace the ink cartridges. (See Replacing the
ink cartridges on page 113.)
Low Temperature
The print head is too cold.
Allow the machine to warm up.
Media Error
The media card is either corrupted,
improperly formatted, or there is a
problem with the media card.
Put the card firmly into the slot again to make
sure it is in the correct position. If the error
remains, check the media drive by putting in
another media card that you know is working.
106
Troubleshooting and Routine Maintenance
Error Message
Cause
Action
Near Empty
One or more of the ink cartridges
are running out of ink. If a sending
machine has a color fax, the
machine's ‘handshake ’ will ask that
the fax be sent as black and white.
If the sending machine has the
ability to convert it, the color fax will
be received into memory as a black
and white fax.
Order a new ink cartridge. (See Ordering
accessories and supplies on page iii.)
No Caller ID
You have not subscribed to the
Caller ID service from your
telephone company.
If you want to use the Caller ID feature call your
telephone company. (See Caller ID on page 44.)
No Cartridge
An ink cartridge is not installed
properly.
Take out the ink cartridge and put it in again
seating it properly. (See Replacing the ink
cartridges on page 113.)
No File
The media card in the media drive
does not contain a .JPG file.
Put the correct media card into the slot again.
No Paper Fed
The machine is out of paper or
paper is not properly loaded in the
paper tray.
Do one of the following:
„ Refill the paper in the paper tray, and then
press Black Start or Color Start.
„ Remove the paper and load it again and then
press Black Start or Color Start.
The paper is jammed in the
machine.
See Printer jam or paper jam on page 110.
No Response/Busy
The number you dialed does not
answer or is busy.
Verify the number and try again.
Not Registered
You tried to access a Speed Dial
number that is not programmed.
Set up the Speed Dial number. (See Storing
Speed-Dial numbers on page 51.)
Out of Memory
The machine's memory is full.
Fax sending or copy operation in progress
Press Stop/Exit and wait until the other
operations in progress finish and then try again.
Printing operation in progress
Reduce print resolution. (For details, see
Printing for Windows® or Printing and Faxing for
Macintosh® in the Software User’s Guide on the
CD-ROM.)
Paper Jam
Paper is jammed in the machine.
See Printer jam or paper jam on page 110.
Print Unable XX
The machine has a mechanical
problem.
Open the scanner cover and remove any foreign
objects inside the machine.
If the error message continues, see Transferring
your faxes or Fax Journal report on page 108
before disconnecting the machine so you will not
lose any important messages. Then, disconnect
the machine from the power for several minutes
and then reconnect it.
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
107
Error Message
Cause
Action
Scan Unable XX The machine has a mechanical
problem.
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
Wrong Paper Size Paper is not the correct size.
Wrong USB
Device
A non-PictBridge compatible or
broken device has been connected
to the PictBridge port.
Transferring your faxes or Fax
Journal report
If the LCD shows:
Change Unable XX
Clean Unable XX
Init. Unable XX
Print Unable XX
Scan Unable XX
Open the scanner cover and remove any foreign
objects inside the machine.
If the error message continues, see Transferring
your faxes or Fax Journal report on page 108
before disconnecting the machine so you will not
lose any important messages. Then, disconnect
the machine from the power for several minutes
and then reconnect it.
Load the correct size of paper (Letter, Legal or
A4), and then press Black Start or Color Start.
Unplug the device from the PictBridge port, then
press On/Off to turn the machine off and then on
again.
Transferring faxes to another fax
machine
B
If you have not set up your Station ID, you
cannot enter fax transfer mode.
a
b
Note
If there is an error message on the
machine's LCD, after the faxes have been
transferred, disconnect the machine from
the power source for several minutes, and
then reconnect it.
108
Do one of the following:
„ If the LCD shows No Data, there
are no faxes left in the machine's
memory.
We recommend transferring your faxes to
another fax machine or to your PC. (See
Transferring faxes to another fax
machine on page 108 or Transferring faxes
to your PC on page 109.)
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring Fax Journal report
to another fax machine on page 109.)
Press Menu, 9, 0, 1.
Press Stop/Exit.
„ If the LCD shows Enter Fax No.,
enter the fax number to which faxes
will be forwarded.
c
Press Black Start.
B
Troubleshooting and Routine Maintenance
Transferring faxes to your PC
B
You can transfer the faxes from your
machine’s memory to your PC.
a
b
c
Document jam
B
Documents can jam if they are not inserted or
fed properly, or if they are too long. Follow the
steps below to clear a document jam.
Make sure you have installed
MFL-Pro Suite on your PC, and then
turn on PC-FAX Receiving on the PC.
(For details, see PC FAX Receiving in
the Software User’s Guide on the
CD-ROM.)
Document is jammed in the top of the
ADF unit
Make sure you have set PC Fax
Receive on the machine. (See PC Fax
Receive on page 56.)
If faxes are in the machine’s memory
when you set up PC Fax Receive, the
LCD will ask if you want to transfer the
faxes to your PC.
a
Take out any paper from the ADF that is
not jammed.
b
c
Open the ADF cover.
d
e
Close the ADF cover.
B
Pull the jammed document out to the
right or left.
Do one of the following:
„ To transfer all faxes to your PC,
press 1.
„ To exit and leave the faxes in the
memory, press 2.
d
Press Stop/Exit.
Transferring Fax Journal report to
another fax machine
If you have not set up your Station ID, you
cannot enter fax transfer mode.
a
b
Press Menu, 9, 0, 2.
c
Press Black Start.
Enter the fax number to which Fax
Journal report will be forwarded.
B
Press Stop/Exit.
Note
To avoid document jams close the ADF
cover properly by pressing it down in the
center.
109
Document is jammed inside the ADF
unit
a
Take out any paper from the ADF that is
not jammed.
b
c
Lift the document cover.
Printer jam or paper jam
B
B
Take out the jammed paper depending on
where it is jammed in the machine.
a
Pull the paper tray out of the machine.
b
Pull out the jammed paper (1).
Pull the jammed document out to the
right.
1
d
e
Close the document cover.
Press Stop/Exit.
c
Reset the machine by lifting the scanner
cover from the front of the machine and
then closing it.
„ If you cannot remove the jammed
paper from the front of the machine,
or the error message still appears on
the LCD after you have removed the
jammed paper, please go to the next
step.
110
Troubleshooting and Routine Maintenance
d
Remove the Jam Clear Cover (1) from
the back of the machine. Pull the
jammed paper out of the machine.
f
Lift the scanner cover (1) from the front
side of the machine until it locks
securely into the open position.
Make sure that there is no jammed
paper left in the corners of the machine.
1
1
Note
If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
g
e
Lift the scanner cover to release the
lock (1). Gently push the scanner cover
support down (2) and close the scanner
cover (3).
Put the Jam Clear Cover back on.
Make sure the cover is set properly.
111
h
Phone line interference
Push the paper tray firmly back into the
machine.
If you are having problems sending or
receiving a fax due to possible interference
on the phone line, we recommend that you
adjust the Equalization for compatibility to
reduce the modem speed for fax operations.
Note
Make sure that you pull out the paper
support until it clicks.
a
b
Press Menu, 2, 0, 2.
Press a or b to choose Normal,
Basic (or High).
„ Basic reduces the modem speed to
9600 bps. Unless interference is a
recurring problem on your phone
line, you may prefer to use it only
when needed.
Dial Tone
„ Normal sets the modem speed at
14400 bps.
B
„ High sets the modem speed at
33600 bps. (Default)
Setting the dial tone to Detection will shorten
the dial detect pause.
a
b
c
112
Press Menu, 0, 5.
Press a or b to choose Detection or
No Detection.
Press OK.
Press Stop/Exit.
Press OK.
c
Press Stop/Exit.
Note
When you change the compatibility to
Basic, the ECM feature is only available
for color fax sending.
B
Troubleshooting and Routine Maintenance
Routine maintenance
Replacing the ink cartridges
B
B
Your machine is equipped with an ink dot
counter. The ink dot counter automatically
monitors the level of ink in each of the 4
cartridges. When the machine detects an ink
cartridge is running out of ink, the machine
will tell you with a message on the LCD.
The LCD will tell you which ink cartridge is low
or needs replacing. Be sure to follow the LCD
prompts to replace the ink cartridges in the
correct order.
Even though the machine tells you that an ink
cartridge is empty, there will be a small
amount of ink left in the ink cartridge. It is
necessary to keep some ink in the ink
cartridge to prevent air from drying out and
damaging the print head assembly.
a
Open the ink cartridge cover.
If one or more ink cartridges are empty,
for example Black, the LCD shows
Ink Empty Black and
Replace Ink.
b
Pull the lock release lever down and
take out the ink cartridge for the color
shown on the LCD.
c
Open the new ink cartridge bag for the
color shown on the LCD, and then take
out the ink cartridge.
d
Remove the protective yellow cap (1).
1
Improper Setup
DO NOT touch the area shown in the
illustration below.
113
Note
Note
If the protective yellow caps come off
when you open the bag, the cartridge will
not be damaged.
e
Each color has its own correct position.
Insert the ink cartridge in the direction of
the arrow on the label.
M
f
If the LCD shows No Cartridge after
you install the ink cartridges, check that
the ink cartridges are installed properly.
WARNING
If ink gets in your eyes, wash them out with
water at once and call a doctor if you are
concerned.
brother
XXXX
Lift each lock release lever and push it
until it clicks, and then close the ink
cartridge cover.
CAUTION
DO NOT take out ink cartridges if you do
not need to replace them. If you do so, it
may reduce the ink quantity and the
machine will not know the quantity of ink left
in the cartridge.
DO NOT touch the cartridge insertion slots.
If you do so, the ink may stain your skin.
If ink stains your skin or clothing, wash with
soap or detergent at once.
g
114
If you replaced an ink cartridge, the LCD
may ask you to verify that it was a brand
new one. (For example,
Did You Change Blck?) For each
new cartridge you installed, press 1
(Yes) to automatically reset the ink dot
counter for that color. If the ink cartridge
you installed is not a brand new one, be
sure to press 2 (No).
If you wait until the LCD shows
Near Empty and Ink Empty, the
machine will automatically reset the ink
dot counter.
If you mix the colors by installing an ink
cartridge in the wrong position, clean the
print head several times after correcting the
cartridge installation.
Once you open an ink cartridge, install it in
the machine and use it up within six months
of installation. Use unopened ink cartridges
by the expiration date written on the
cartridge package.
DO NOT dismantle or tamper with the ink
cartridge, this can cause the ink to leak out
of the cartridge.
Troubleshooting and Routine Maintenance
Clean the outside of the machine as
follows:
Brother strongly recommends that you do
not refill the ink cartridges provided with
your machine. We also strongly
recommend that you continue to use only
Genuine Brother Brand replacement ink
cartridges. Use or attempted use of
potentially incompatible ink and/or
cartridges in the Brother machine may
cause damage to the machine and/or may
result in unsatisfactory print quality. Our
warranty coverage does not apply to any
problem that is caused by the use of
unauthorized third party ink and/or
cartridges. To protect your investment and
obtain premium performance from the
Brother machine, we strongly recommend
the use of Genuine Brother Supplies.
Cleaning the outside of the
machine
a
B
Pull the paper tray (1) completely out of
the machine.
1
b
Wipe the outside of the machine with a
soft cloth to remove dust.
c
Remove anything that is stuck inside the
paper tray.
d
Lift the output paper tray cover and wipe
the inside and outside of the paper tray
with a soft cloth to remove dust.
e
Close the output paper tray cover and
put the paper tray firmly back in the
machine.
B
CAUTION
Use neutral detergents. Cleaning with
volatile liquids such as thinner or benzine
will damage the outside surface of the
machine.
DO NOT use cleaning materials that
contain ammonia.
DO NOT use isopropyl alcohol to remove
dirt from the control panel. It may crack the
panel.
115
Cleaning the scanner
a
B
Lift the document cover (1). Clean the
scanner glass (2) and the white
plastic (3) with isopropyl alcohol on a
soft lint-free cloth.
1
3
Cleaning the machine printer
platen
WARNING
Unplug the machine from the AC power
outlet before cleaning the printer platen (1).
If ink is scattered on or around the printer
platen, wipe it off with a soft, dry, lint-free
cloth.
2
b
In the ADF unit, clean the white bar (1)
and the glass strip (2) under it with
isopropyl alcohol on a lint-free cloth.
1
1
a
2
116
B
Clean the machine printer platen (1).
Troubleshooting and Routine Maintenance
Cleaning the paper pick-up
roller
a
Pull the paper tray completely out of the
machine.
b
Unplug the machine from the AC power
outlet and remove the Jam Clear
Cover (1).
Cleaning the print head
B
B
To ensure the good print quality, the machine
will regularly clean the print head. You can
start the cleaning process manually if
needed.
Clean the print head and ink cartridges if you
get a horizontal line in the text or graphics on
your printed pages. You can clean Black only,
three colors at a time
(Yellow/Cyan/Magenta), or all four colors at
once.
Cleaning the print head consumes ink.
Cleaning too often uses ink unnecessarily.
CAUTION
1
DO NOT touch the print head. Touching the
print head may cause permanent damage
and may void the print head's warranty.
a
b
c
Clean the Paper Pick-up Roller (1) with
isopropyl alcohol on a cotton swab.
1
c
Press Ink.
Press a or b to choose Cleaning.
Press OK.
Press a or b to choose Black, Color
or All.
Press OK.
The machine cleans the print head.
When cleaning is finished, the machine
will go back to standby mode
automatically.
Note
If you clean the print head at least five
times and the print has not improved, call
Brother Customer Service. (See Brother
numbers on page i.)
d
e
Re-insert the Jam Clear Cover.
f
Re-connect the power cord.
Put the paper tray firmly back in the
machine.
117
Checking the print quality
B
h
If faded or streaked colors and text appear on
your output, some of the nozzles may be
clogged. You can check this by printing the
Print Quality Check Sheet and looking at the
nozzle check pattern.
a
b
c
Press Ink.
d
Press Color Start.
The machine begins printing the Print
Quality Check Sheet.
e
Check the quality of the four color blocks
on the sheet.
Is Quality OK?
1.Yes 2.No
f
Start Cleaning?
1.Yes 2.No
Press 1 (Yes).
The machine starts cleaning the print
head.
i
After cleaning is finished, press
Color Start.
The machine starts printing the Print
Quality Check Sheet again and then
returns to step e.
j
Press Stop/Exit.
If you repeat this procedure at least five
times and the print quality is still poor,
replace the ink cartridge for the clogged
color.
After replacing the ink cartridge, check
the print quality. If the problem still
exists, repeat the cleaning and test print
procedures at least five times for the
new ink cartridge. If ink is still missing,
call Brother Customer Service. (See
Brother numbers on page i.)
Press a or b to choose Test Print.
Press OK.
Press a or b to choose
Print Quality.
Press OK.
Do one of the following:
„ If all lines are clear and visible, press
1 to choose Yes, and go to step j.
„ If you can see missing short lines as
shown below, press 2 to choose No.
OK
Poor
The LCD asks you if you want to start
cleaning.
CAUTION
DO NOT touch the print head. Touching the
print head may cause permanent damage
and may void the print head's warranty.
Note
g
The LCD asks you if the print quality is
OK for black and three colors.
i
Black OK?
1.Yes 2.No
Press 1 (Yes) or 2 (No).
118
When a print head
nozzle is clogged
the printed
sample looks like
this.
After the print
head nozzle is
cleaned, the
horizontal lines
are gone.
Troubleshooting and Routine Maintenance
Checking the printing
alignment
You may need to adjust the printing
alignment after transporting the machine if
your printed text becomes blurred or images
become faded.
a
b
B
Press a or b to choose Test Print.
Press OK.
Press a or b to choose Alignment.
Press OK.
d
Press Black Start or Color Start.
The machine starts printing the
Alignment Check Sheet.
Is Alignment OK?
1.Yes 2.No
Check the 600 dpi and 1200 dpi test
prints to see if number 5 most closely
matches number 0.
B
You can check the ink that is left in the
cartridge.
a
b
Press Ink.
c
e
Checking the ink volume
c
Press Ink.
Press a or b to choose Ink Volume.
Press OK.
Press a or b to choose the color you
want to check.
The LCD shows the ink volume.
Ink Volume
BK: -nnnonnn+ e
d
Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows® or
Printing and Fax for Macintosh® in the
Software User's Guide on the CD-ROM.)
„ If the number 5 sample of both the
600 dpi and 1200 dpi are the best
matches, press 1 (Yes) to finish
Alignment Check, and go to step h.
„ If another test print number is a
better match for either 600 dpi or
1200 dpi, press 2 (No) to choose it.
f
For 600 dpi, press the number of the test
print that most closely matches the
number 0 sample (1-8).
600dpi Adjust
Select Best #5
g
For 1200 dpi, press the number of the
test print that most closely matches the
number 0 sample (1-8).
1200dpi Adjust
Select Best #5
h
Press Stop/Exit.
119
Machine Information
Checking the serial number
You can see the machine’s serial number on
the LCD.
a
Press Menu, 7, 1.
B
Packing and shipping
the machine
B
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, you could void your warranty.
CAUTION
Machine Info.
1.Serial No.
b
Press OK.
XXXXXXXXX
c
120
Press Stop/Exit.
It is important to allow the machine to ‘park’
the print head after a print job. Listen
carefully to the machine before unplugging
it to make sure that all mechanical noise
has stopped. Not allowing the machine to
finish this parking process may lead to print
problems and possible damage to the print
head.
a
b
Open the ink cartridge cover.
c
Install the yellow protective part, lift each
lock release levers and push it until it
clicks, and then close the ink cartridge
cover.
Pull the lock release levers down and take
out all the ink cartridges. (See Replacing
the ink cartridges on page 113.)
B
Troubleshooting and Routine Maintenance
CAUTION
If you are not able to find the yellow
protective parts, DO NOT remove the ink
cartridges before shipping. It is essential
that the machine be shipped with either the
yellow protective parts or the ink cartridges
in position. Shipping without them will
cause damage to your machine and may
void your warranty.
d
Unplug the machine from the telephone
wall jack and take the telephone line
cord out of the machine.
e
Unplug the machine from the AC power
outlet.
f
Lift the scanner cover from the front side
of the machine until it lock securely into
the open position. Then unplug the
interface cable from the machine, if it is
connected.
g
Lift the scanner cover to release the
lock. Gently push the scanner cover
support down and close the scanner
cover.
h
Wrap the machine in the bag and put it
in the original carton with the original
packing material.
i
Pack the printed materials in the original
carton as shown below. Do not pack the
used ink cartridges in the carton.
Note
If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts and printed materials to use with
your ‘Exchange’ machine.
j
Close the carton and tape it shut.
121
C
Menu and Features
On-screen
programming
C
Menu keys
C
Your machine is designed to be easy to use
with LCD on-screen programming using the
menu keys. User-friendly programming helps
you take full advantage of all the menu
selections your machine has to offer.
Since your programming is done on the LCD,
we have created step-by-step on-screen
instructions to help you program your
machine. All you need to do is follow the
instructions as they guide you through the
menu selections and programming options.
Menu table
Access the menu.
Go to the next menu level.
Accept an option.
C
Go back to the previous menu
level.
Delete an incorrect letter when
you need to enter text into the
machine.
You can program your machine without the
User’s Guide by using the Menu table that
begins on page 124. These pages list the
menu selections and options.
Scroll through the current menu
level.
Press Menu followed by the menu numbers
to program your machine.
For example, to set beeper volume to Low.
a
b
c
Press Menu, 1, 4, 2.
Exit the menu.
Press a or b to choose Low.
Press OK.
Memory storage
Even if there is a power failure, you will not
lose your menu settings because they are
stored permanently. Temporary settings
(such as Contrast, Overseas mode, and so
on) will be lost. You may have to reset the
date and time.
122
Go back to the previous menu
level.
C
C
Menu and Features
To access the menu mode:
a
b
Press Menu.
Choose an option.
„ Press 1 for General Setup menu.
„ Press 2 for Fax menu.
„ Press 3 for Copy menu.
„ Press 0 for Initial Setup menu.
You can scroll more quickly through
each menu level by pressing a or b for
the direction you want.
c
Press OK when that option appears on
the LCD.
The LCD will then show the next menu
level.
d
Press a or b to scroll to your next menu
selection.
e
Press OK.
When you finish setting an option, the
LCD shows Accepted.
123
Menu Table
C
The menu table will help you understand the menu selections and options that are found in the
machine's programs. The factory settings are shown in Bold with an asterisk.
Choose & OK
Choose & OK
to accept
to exit
Main Menu
Submenu
Menu Selections
Options
Descriptions
Page
1.General
Setup
1.Mode Timer
—
0 Sec
Sets the time to return to
Fax mode.
23
Sets the type of paper in
the paper tray.
23
Sets the size of the paper
in the paper tray.
24
Sets the size of paper in
tray#1.
24
Sets the size of paper in
tray#2.
24
30 Secs
1 Min
2 Mins*
5 Mins
Off
2.Paper Type
—
Plain Paper*
Inkjet Paper
Brother Photo
Other Photo
Transparency
3.Paper Size
—
(MFC-5460CN
only)
Letter*
Legal
A4
A5
4"x6"
3.Paper Size
1.Tray#1
(MFC-5860CN
only)
Letter*
Legal
A4
A5
4"x6"
2.Tray#2
Letter*
Legal
A4
124
Menu and Features
Main Menu
Submenu
Menu Selections
Options
Descriptions
Page
1.General
Setup
4.Volume
1.Ring
Off
Adjusts the ring volume.
25
Adjusts the volume level of
the beeper.
25
Adjusts the speaker
volume.
26
Changes for Daylight
Savings Time
automatically.
26
Customizes the On/Off
key to receive faxes even
in off mode.
22
Adjusts the contrast of the
LCD.
26
Choose the tray that will be
used for Copy mode.
25
Choose the tray that will be
used for Fax mode.
24
Sets the number of rings
before the machine
answers in Fax Only or
Fax/Tel mode.
38
Sets the
pseudo/double-ring time in
Fax/Tel mode.
39
Receives fax messages
without pressing
Black Start or
Color Start.
39
Low
(Continued)
Med*
High
2.Beeper
Off
Low*
Med
High
3.Speaker
Off
Low
Med*
High
5.Auto Daylight
—
On
Off*
6.On/Off
Setting
—
7.LCD Contrast
—
8.Tray Use:Copy
—
Fax Receive:On
Fax Receive:Off*
Light*
Dark
(MFC-5860CN
only)
9.Tray Use:Fax
Tray#2 Only
Auto Select*
—
(MFC-5860CN
only)
2.Fax
1.Setup Receive
Tray#1 Only
Tray#1 Only
Tray#2 Only
Auto Select*
1.Ring Delay
(In Fax mode
only)
00
01
02
03
04*
2.F/T Ring Time
20 Secs*
30 Secs
40 Secs
70 Secs
3.Easy Receive
On*
Off
125
Main Menu
Submenu
2.Fax
(Continued)
Menu Selections
Options
Descriptions
Page
1.Setup Receive 4.Remote Codes
On* ( l51, #51)
49
(In Fax mode
only)
Off
Allows you to answer all
calls at an extension or
external phone and use
codes to turn the machine
on or off. You can
personalize these codes.
Cuts the size of incoming
faxes.
40
(Continued)
5.Auto Reduction
On*
6.Polling RX
—
Sets up your machine to
poll another fax machine.
63
1.Contrast
Auto*
Changes the lightness or
darkness of faxes you
send.
33
Sets the default resolution
for outgoing faxes.
33
Off
2.Setup Send
(In Fax mode
only)
Light
Dark
2.Fax Resolution
Standard*
Fine
S.Fine
Photo
3.Delayed Fax
—
Set the time of day in 24
hour format that the
delayed faxes will be sent.
35
4.Batch TX
On
Combines delayed faxes to
the same fax number at the
same time of day into one
transmission.
35
Sends a fax without using
the memory.
34
Sets up your machine with
a document to be retrieved
by another fax machine.
64
If you are having problems
sending faxes overseas,
set this to on.
34
Adjusts the scan area of
the scanner glass to the
size of the document.
31
Off*
5.Real Time TX
Next Fax Only
On
Off*
6.Polled TX
On
Off*
7.Overseas Mode
On
Off*
0.Scan Size
A4
Letter*
3.Set
Quick-Dial
126
1.Speed-Dial
—
Stores Speed-Dial
numbers, so you can dial
by pressing only a few keys
(and Start).
51
2.Setup Groups
—
Sets up a Group number
for Broadcasting.
52
Menu and Features
Main Menu
Submenu
Menu Selections
Options
Descriptions
Page
2.Fax
4.Report
Setting
1.Transmission
On
Sets initial setup for
Transmission Verification
Report and Fax Journal.
61
(Continued)
On+Image
(Continued)
Off*
Off+Image
2.Journal Period
61
Off
Every 50 Faxes*
Every 6 Hours
Every 12 Hours
Every 24 Hours
Every 2 Days
Every 7 Days
5.Remote Fax
Opt
1.Fwd/Page/Store
Off*
Fax Forward
Paging
Fax Storage
PC Fax Receive
Sets the machine to
forward fax messages, to
call your pager, to store
incoming faxes in the
memory (so you can
retrieve them while you are
away from your machine),
or to send faxes to your
PC.
54
2.Remote Access
—l
You must set your own
58
code for Remote Retrieval.
3.Print Fax
—
Prints incoming faxes
stored in the memory.
40
35
(Backup Print)
6.Remaining
Jobs
—
—
Checks which jobs are in
the memory and lets you
cancel chosen jobs.
0.Miscellaneous
1.TX Lock
—
27
Stops unauthorized users
from changing the
machine’s current settings.
2.Compatibility
High*
Adjusts the equalization for
transmission problems.
112
Uses the Telephone
Company’s Distinctive
Ring subscriber service to
register the ring pattern
with the machine.
42
View or print a list of the
last 30 Caller IDs stored in
the memory.
44
Normal
Basic
3.Distinctive
Off*
Set (On)
4.Caller ID
Display#
Print Report
127
Main Menu
Submenu
Menu Selections
Options
Descriptions
Page
3.Copy
1.Quality
—
Best
Chooses the Copy
resolution for your type of
document.
67
Adjusts the brightness for
copies.
71
Adjusts the contrast for
copies.
71
Adjusts the amount of Red
in copies.
71
Fast
Normal*
2.Brightness
—
-nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+
3.Contrast
—
-nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+
4.Color Adjust
1.Red
R:-nnnno+
R:-nnnon+
R:-nnonn+*
R:-nonnn+
R:-onnnn+
2.Green
G:-nnnno+
G:-nnnon+
Adjusts the amount of
Green in copies.
G:-nnonn+*
G:-nonnn+
G:-onnnn+
3.Blue
B:-nnnno+
B:-nnnon+
Adjusts the amount of Blue
in copies.
B:-nnonn+*
B:-nonnn+
B:-onnnn+
4.PhotoCapture
1.Print Quality —
Normal
Chooses the print quality.
79
Chooses the paper type.
79
Chooses the paper size.
79
Photo*
2.Paper Type
—
Plain Paper
Inkjet Paper
Brother Photo
Other Photo*
3.Paper Size
—
Letter
A4
4"x6"*
5"x7"
128
Menu and Features
Main Menu
Submenu
Menu Selections
Options
Descriptions
Page
4.PhotoCapture
4.Brightness
—
- nnnno +
Adjusts the brightness.
79
Adjusts the contrast.
79
Adjusts the hue of the
white areas.
79
(Continued)
- nnnon +
- nnonn +*
- nonnn +
- onnnn +
5.Contrast
—
- nnnno +
- nnnon +
- nnonn +*
- nonnn +
- onnnn +
6.True2Life
On
Off*
1.White Balance
- nnnno +
- nnnon +
- nnonn +*
- nonnn +
- onnnn +
2.Sharpness
- nnnno +
Enhances the detail of the
image.
- nnnon +
- nnonn +*
- nonnn +
- onnnn +
3.Color Density
- nnnno +
Adjusts the total amount of
colorin the image.
- nnnon +
- nnonn +*
- nonnn +
- onnnn +
7.Cropping
—
On*
Off
8.Borderless
—
On*
Off
Crops the image around
the margin to fit the paper
size or print size. Turn this
feature off if you want to
print whole images or
prevent unwanted
cropping.
80
Expands the printable area
to fit the edges of the
paper.
80
129
Main Menu
Submenu
Menu Selections
Options
Descriptions
Page
4.PhotoCapture
9.Scan to Card
1.Quality
B/W 200x100 dpi
Chooses the Scan
resolution for your type of
document.
81
Chooses the default file
format for black and white
scanning.
81
Chooses the default file
format for color scanning.
82
You can choose the BOOT
method that best suits you
needs.
See
Network
User’s
Guide
(Continued)
B/W 200 dpi
Color 150 dpi*
Color 300 dpi
Color 600 dpi
2.B/W File Type
TIFF*
PDF
3.ColorFile Type
PDF*
1.BOOT Method
Auto*
JPEG
5.LAN
1.Setup TCP/IP
Static
RARP
BOOTP
DHCP
2.IP Address
[000-255].
Enter the IP address.
[000-255].
[000-255].
[000-255]
3.Subnet Mask
[000-255].
Enter the subnet mask.
[000-255].
[000-255].
[000-255]
4.Gateway
[000-255].
[000-255].
Enter the Gateway
address.
[000-255].
[000-255]
5.Node Name
BRN_XXXXXX
Enter the Node name.
6.WINS Config
Auto*
You can choose the WINS
configuration mode.
Static.
7.WINS Server
(Primary)
000.000.000.000
(Secondary)
Specifies the IP address of
the primary or secondary
server.
000.000.000.000
8.DNS Server
(Primary)
000.000.000.000
(Secondary)
Specifies the IP address of
the primary or secondary
server.
000.000.000.000
9.APIPA
On*
Off
130
Automatically allocates the
IP address from the
link-local address range.
Menu and Features
Main Menu
Submenu
Menu Selections
Options
Descriptions
Page
5.LAN
2.Setup Misc.
1.Ethernet
Auto*
Chooses Ethernet link
mode.
See
Network
User’s
Guide
(Continued)
100B-FD
100B-HD
10B-FD
10B-HD
0.Factory Re
set
—
—
Restore all network
settings to factory default.
1.Transmission
—
—
Prints a Transmission
Verification Report for your
last transmission.
62
2.Help List
—
—
Prints the Help List so you
can see at-a-glance how to
quickly program your
machine.
62
3.Quick-Dial
—
—
Lists name and numbers
stored in the One-Touch
and Speed-Dial memory,
in numerical order.
62
4.Fax Journal
—
—
Lists information about the
last incoming and outgoing
faxes. (TX means
Transmit.) (RX means
Receive.)
62
5.User Settings
—
—
Lists your settings.
62
6.Network
Config
—
—
Lists your settings.
62
7.Machine
Info.
1.Serial No.
—
—
Lets you check the serial
number of your machine.
120
0.Initial
Setup
1.Receive Mode
—
Fax Only*
Choose the receive mode
that best suits your needs.
38
See
Quick
Setup
Guide
6.Print
Reports
Fax/Tel
External TAD
Manual
2.Date/Time
—
—
Puts the date and time on
the LCD and in headings of
faxes you send.
3.Station ID
—
Fax:
Set your name and fax
number to appear on each
page you fax.
Name:
4.Tone/Pulse
—
(Canada only)
Tone*
5.Dial Tone
—
0.Local
Language
—
Detection
No Detection*
(Canada only)
Choose the dialing mode.
Pulse
English*
French
You can shorten the dial
tone detect pause.
112
Allows you to change the
LCD language for your
country.
See
Quick
Setup
Guide
131
Entering Text
Special characters and symbols
C
Press l, # or 0, and then press d or c to
move the cursor under the special character
or symbol you want. Then press OK to
choose it.
When you are setting certain menu
selections, such as the Station ID, you may
need to enter text into the machine. Most dial
pad keys have three or four letters printed on
keys. The keys for 0, # and l do not have
printed letters because they are used for
special characters.
By pressing the proper dial pad key
repeatedly, you can access the character you
want.
Press
Key
one
time
two
times
three
times
four
times
2
A
B
C
2
3
D
E
F
3
4
G
H
I
4
5
J
K
L
5
6
M
N
O
6
7
P
Q
R
S
8
T
U
V
8
9
W
X
Y
Z
Putting spaces
C
To enter a space in a fax number, press c
once between numbers. To enter a space in
a name, press c twice between characters.
Making corrections
C
If you entered an incorrect letter and want to
change it, press d to move the cursor under
the incorrect character. Then press
Clear/Back. Re-enter the correct character.
You can also back up and insert letters.
Repeating letters
If you need to enter a letter that is on the
same key as the letter before, press c to
move the cursor to the right before you press
the key again.
132
C
Press l
for
(space) ! " # $ % & ' ( ) l
+,-./m
Press #
for
:;<=>?@[]^_
Press 0
for
ÉÀÈÊÎÇËÖ0
C
D
Specifications
General
D
D
Memory Capacity
32 MB
ADF (automatic document
feeder)
Up to 35 pages
Temperature: 68° F - 86° F (20° C - 30° C)
Humidity: 50% - 70%
Paper: [20 lb (80 g/m2)] Letter size
Paper Tray
100 Sheets [20 lb (80 g/m2)]
Paper Tray#2
(MFC-5860CN only)
250 Sheets [20 lb (80 g/m2)]
Printer Type
Ink Jet
Print Method
Black:
Piezo with 94 × 1 nozzles
Color:
Piezo with 94 × 3 nozzles
LCD (liquid crystal display) 16 characters × 2 lines, Back light
Power Source
AC 100 to 120V 50/60Hz
Power Consumption
Off Mode:
Average 4 W
Standby:
Average 6 W
Operating:
Average 29 W
133
Dimensions
(MFC-5460CN)
8.9 in.
(226 mm)
17.3 in. (440 mm)
15.5 in. (392 mm)
18.9 in. (478 mm)
17.3 in. (440 mm)
15.5 in. (392 mm)
18.9 in. (478 mm)
(MFC-5860CN)
11.9 in.
(302 mm)
Weight
19.6 lb (8.9kg) (MFC-5460CN)
23.4 lb (10.6kg) (MFC-5860CN)
Noise
Operating:
Temperature Operating:
Humidity
1
50° F to 95° F (10 to 35° C)
Best Print Quality:
68° F to 91° F (20 to 33° C)
Operating:
20 to 80% (without condensation)
Best Print Quality:
20 to 80% (without condensation)
This depends on printing conditions.
134
50 dB or less 1
Specifications
Print media
Paper Input
D
Paper Tray
„ Paper type:
Plain paper, inkjet paper (coated paper), glossy paper 2,
transparencies 1 2 and envelopes
„ Paper size:
Letter, Legal, Executive, A4, A5, A6, JIS B5, envelopes
(commercial No.10, DL, C5, Monarch, JE4), Photo 4"×6",
Index card and Post card 3.
For more details, see Paper weight, thickness and
capacity on page 15.
„ Maximum paper tray capacity: Approx. 100 sheets of
20 lb (80 g/m2) plain paper
Paper Tray#2 (MFC-5860CN only)
„ Paper type:
Plain paper
„ Paper size:
Letter, Legal, Executive, A4, JIS_B5
„ Maximum paper tray capacity: Approx. 250 sheets of
20 lb (80 g/m2) plain paper
Paper Output
Up to 50 sheets of 20 lb (80 g/m2) plain paper (face up print
delivery to the output paper tray) 2
1
Use only transparencies recommended for inkjet printing.
2
For glossy paper or transparencies, we recommend removing printed pages from the output paper tray immediately
after they exit the machine to avoid smudging.
3
See Paper type and size for each operation on page 14.
135
Fax
D
Compatibility
ITU-T Group 3
Coding System
MH/MR/MMR/JPEG
Modem Speed
Automatic Fallback
33,600 bps
Document Size
ADF Width: 5.8 in. to 8.5 in. (148 mm to 215.9 mm)
ADF Height: 5.8 in. to 14 in. (148 mm to 355.6 mm)
Scanner Glass Width: Max. 8.5 in. (215.9 mm)
Scanner Glass Height: Max. 11.7 in. (297 mm)
Scanning Width
8.2 in. (208 mm)
Printing Width
8.03 in. (204 mm)
Gray Scale
256 levels
Polling Types
Standard, Sequential: (Black only)
Contrast Control
Automatic/Light/Dark
(manual setting)
Resolution
„ Horizontal 203 dot/in. (8 dot/mm)
„ Vertical
Standard
98 line/in. (3.85 line/mm) (Black)
196 line/in. (7.7 line/mm) (Color)
Fine
196 line/in. (7.7 line/mm) (Black/Color)
Photo
196 line/in. (7.7 line/mm) (Black)
Superfine
392 line/in. (15.4 line/mm) (Black)
Speed-Dial
100 stations
Broadcasting
150 stations
Automatic Redial
1 time after 5 minutes
Auto Answer
0, 1, 2, 3 or 4 rings
Communication Source
Public switched telephone network.
Memory Transmission
Up to 480 1/400 2 pages
Out of Paper Reception
Up to 480 1/400 2 pages
1
‘Pages’ refers to the ‘Brother Standard Chart No. 1’ (a typical business letter, Standard resolution, MMR code).
Specifications and printed materials are subject to change without prior notice.
2
‘Pages’ refers to the ‘ITU-T Test Chart #1’ (a typical business letter, Standard resolution, MMR code). Specifications
and printed materials are subject to change without prior notice.
136
Specifications
Copy
D
Color/Black
Yes/Yes
Document Size
ADF Width: 5.8 in. to 8.5 in. (148 mm to 215.9 mm)
ADF Height: 5.8 in. to 14 in. (148 mm to 355.6 mm)
Scanner Glass Width: Max. 8.5 in. (215.9 mm)
Scanner Glass Height: Max. 11.7 in. (297 mm)
Copy Speed
Black: Up to 22 pages/minute (Letter paper) 1
Color: Up to 20 pages/minute (Letter paper) 1
Multiple Copies
Stacks up to 99 pages
Sorts up to 99 pages
Enlarge/Reduce
25% to 400% (in increments of 1%)
Resolution
Plain, inkjet, glossy paper or OHP/Transparency:
„ Scans up to 1200×1200 dpi
„ Prints up to 1200×1200 dpi
1
Based on Brother standard pattern. (Fast mode/Stack Copy) Copy speeds vary with the complexity of the document.
137
PhotoCapture Center®
Available Media
D
CompactFlash® Version 1.0
(Type I only)
(Microdrive™ is not compatible)
(Compact I/O card such as Compact LAN card and
Compact Modem card are not supported.)
Memory Stick®
Memory Stick Pro™
(Not available for music data with MagicGate™)
MultiMediaCard™
Secure Digital™
xD-Picture Card™ 1
File Extension
(Media Format)
DPOF, EXIF, DCF
(Image Format)
Photo Print: JPEG 2
Scan to Card:JPEG, PDF (Color)
TIFF, PDF (Black)
Color Enhancement
True2Life
Number of Files
Up to 999 files in the media card
(including the folder inside media)
Folder
File must be in the 3rd folder level of the Media Card.
Borderless
Letter, A4, Photo 4" × 6", Photo 5" × 7" 3
1
xD-Picture Card™ Conventional Card from 16MB to 512MB
xD-Picture Card™ Type M from 256MB to 1GB
xD-Picture Card™ Type H from 256MB to 1GB
2
Progressive JPEG format is not supported.
3
See Paper type and size for each operation on page 14.
PictBridge
Compatibility
D
Supports the Camera & Imaging Products Association
PictBridge standard CIPA DC-001.
Visit http://www.cipa.jp/pictbridge for more information.
Interface
138
PictBridge (USB) Port
Specifications
Scanner
D
Color/Black
Yes/Yes
TWAIN Compliant
Yes (Windows® 98/98SE/Me/2000 Professional/XP/
Windows® XP Professional x64 Edition)
Mac OS ® X 10.2.4 or greater
WIA Compliant
Yes (Windows® XP 1)
Color Depth
48 bit color Processing (Input)
24 bit color Processing (Output)
Resolution
Up to 19200 × 19200 dpi (interpolated) 2
Up to 1200 × 2400 dpi (optical)
Scanning Speed
Color: up to 4.55 sec.
Black: up to 3.35 sec.
(Letter size in 100 × 100 dpi)
Document Size
ADF Width: 5.8 in. to 8.5 in. (148 mm to 215.9 mm)
ADF Height: 5.8 in. to 14 in. (148 mm to 355.6 mm)
Scanner Glass Width: Max. 8.5 in. (215.9 mm)
Scanner Glass Height: Max. 11.7 in. (297 mm)
Scanning Width
8.26 in. (210 mm)
Gray Scale
256 levels
1
Windows® XP in this User’s Guide includes Windows® XP Home Edition, Windows® XP Professional, and Windows®
XP Professional x64 Edition.
2
Maximum 1200 × 1200 dpi scanning when using the WIA Driver for Windows® XP (resolution up to 19200 × 19200 dpi
can be chosen by using the Brother scanner utility)
139
Printer
Printer Driver
D
Windows® 98/98SE/Me/2000 Professional/
XP/Windows® XP Professional x64 Edition driver supporting
Brother Native Compression mode and bi-directional
capability
Brother Ink Driver
For Mac OS® X 10.2.4 or greater
Resolution
Up to 1200 × 6000 dpi 1
1200 × 2400 dpi
1200 × 1200 dpi
600 × 600 dpi
600 × 300 dpi
600 × 150 dpi
Print Speed
Up to 30 pages/minute (Black) 2
Up to 25 pages/minute (Color) 2
Printing Width
8.03 in. (8.5 in. 3)
Disk-Based Fonts
35 TrueType
Borderless
Letter, A4, A6, Photo 4"×6", Index Card, Post Card 4
1
Output image quality varies based on many factors including, but not limited to input image resolution and quality and
print media.
2
Based on Brother standard pattern.
Letter size in draft mode.
3
When you set the Borderless feature to On.
4
See Paper type and size for each operation on page 14.
Interfaces
D
USB
A USB 2.0 interface cable that is no longer than 6 feet
(2.0 m). 1 2
LAN cable 3
Ethernet UTP cable category 5 or greater.
1
Your machine has a USB 2.0 Full-speed interface. This interface is compatible with USB 2.0 Hi-Speed; however, the
maximum data transfer rate will be 12 Mbits/s. The machine can also be connected to a computer that has a USB 1.1
interface.
2
Third party USB ports are not supported for Macintosh®.
3
See the Network User’s Guide on the CD-ROM for detailed network specifications.
140
Specifications
Computer requirements
D
Minimum System Requirements and Supported PC Software Functions
Computer Platform
& Operating
System Version
Supported
PC
Software
Functions
PC
Processor
Interface Minimum
Speed
Minimum Recommended Available Hard
RAM
RAM
Disk Space
for
for
Drivers Applications
USB
Windows® 98, 98SE Printing,
Intel® Pentium® II 32 MB 128 MB 120 MB 130 MB
4
Operating Me
or equivalent
PC Fax ,
System 1 2000 Professional Scanning, Ethernet
64 MB 256 MB
Removable
XP Home
128 MB 256 MB 170 MB 220 MB
Disk 3
XP Professional
XP Professional
x64 Edition
AMD Opteron™
256 MB 512 MB 170 MB 220 MB
AMD Athlon™64
Intel® Xeon™
with Intel® EM64T
Intel® Pentium® 4
with Intel® EM64T
Apple®
Macintosh®
Operating
System
OS X 10.2.4
or greater
Printing,
PC Fax
Send 4,
Scanning,
Removable
Disk 3
1
Microsoft® Internet Explorer 5 or
greater.
2
Third party USB ports are not
supported.
3
Removable disk is a function of
128 MB 256 MB 80 MB
PowerPC G3
/G4/G5,
Intel Core Solo/
Ethernet Duo
350MHz
USB 2
200 MB
For the latest driver updates access the Brother Solutions
Center at http://solutions.brother.com/
PhotoCapture Center®.
4
PC FAX supports black and white
faxing only.
141
Consumable items
Ink
The machine uses individual Black, Yellow, Cyan and Magenta ink
cartridges that are separate from the print head assembly.
Service Life of Ink
Cartridge
The first time you install the ink cartridges the machine will use extra
ink to fill the ink delivery tubes.
This is a one-time process that enables high quality printing.
Afterward, replacement ink cartridges will print the specified
number of pages.
Replacement Ink Cartridges
Standard Black - Approximately 500 pages at 5% coverage
High Yield Black - Approximately 900 pages at 5% coverage
Yellow, Cyan and Magenta - Approximately 400 pages at 5%
coverage
The above figures are based upon the following assumptions:
„ Continuous printing at a resolution of 600 × 600 dpi in normal
mode after installing new ink cartridge;
„ The printing frequency;
„ The number of pages printed;
„ Periodic, automatic, print head assembly cleaning (Your
machine will clean the print head assembly periodically. This
process will use a small amount of ink); and,
„ Ink remaining in cartridge identified as ‘empty’ (It is necessary to
leave a small amount of ink in the ink cartridge to prevent air
from drying out and damaging the print head assembly).
Replacement
Consumables
<Standard Black> LC51BK,
<High Yield Black> LC51HY-BK, <Cyan> LC51C,
<Magenta>LC51M, <Yellow> LC51Y
142
D
Specifications
Network (LAN)
D
LAN
You can connect your machine to a network for Network
Printing, Network Scanning and PC Fax Send and PC Fax
Receive 1 (Windows® only). Also included is Brother
BRAdmin Professional Network Management software.
Support for
Windows® 98/98SE/Me/2000/XP/XP Professional x64 Edition
Mac OS ® X 10.2.4 or greater
Ethernet 10/100 BASE-TX Auto Negotiation
Protocols
TCP/IP
ARP, RARP, BOOTP, DHCP, APIPA (Auto IP), NetBIOS
Name Resolution, WINS, DNS Resolver, LPR/LPD, Custom
Raw Port/Port9100, FTP Server, mDNS, TELNET, SNMP
1
See the Computer requirements on page 141.
143
E
Glossary
E
This is a comprehensive list of features and terms that appear in Brother manuals. Availability of
these features depends on the model you purchased.
ADF (automatic document feeder)
The document can be placed in the ADF
and scanned one page at a time
automatically.
Auto Reduction
Reduces the size of incoming faxes.
Automatic Redial
A feature that enables your machine to
redial the last fax number after five
minutes if the fax did not go through
because the line was busy.
Backup Print
Your machine prints a copy of every fax
that is received and stored in memory.This
is a safety feature so you will not lose
messages during a power failure.
Beeper Volume
Volume setting for the beep when you
press a key or make an error.
Brightness
Changing the Brightness makes the whole
image lighter or darker.
Broadcasting
The ability to send the same fax message
to more than one location.
Caller ID
A service purchased from the telephone
company that lets you see the number (or
name) of the party calling you.
CNG tones
The special tones (beeps) sent by fax
machines during automatic transmission
to tell the receiving machine that a fax
machine is calling.
144
Coding method
Method of coding the information
contained in the document. All fax
machines must use a minimum standard
of Modified Huffman (MH). Your machine
is capable of greater compression
methods, Modified Read (MR), Modified
Modified Read (MMR) and JPEG, if the
receiving machine has the same
capability.
Communication error (Comm. Error)
An error during fax sending or receiving,
usually caused by line noise or static.
Compatibility group
The ability of one fax unit to communicate
with another. Compatibility is assured
between ITU-T Groups.
Contrast
Setting to compensate for dark or light
documents, by making faxes or copies of
dark documents lighter and light
documents darker.
Distinctive Ring
A subscriber service purchased from the
telephone company that gives you
another phone number on an existing
phone line. The Brother machine uses the
new number to simulate a dedicated fax
line.
Dual Access
Your machine can scan outgoing faxes or
scheduled jobs into memory at the same
time it is sending a fax from memory or
receiving or printing an incoming fax.
Easy Receive
Enables your machine to respond to CNG
tones if you interrupt a fax call by
answering it.
Glossary
ECM (Error Correction Mode)
Detects errors during fax transmission
and resends the pages of the fax that had
an error.
Fax Journal
Lists information about the last 200
incoming and outgoing faxes. TX means
Transmit. RX means Receive.
Extension phone
A telephone using the same line as your
fax but plugged into a separate wall jack.
Journal Period
The pre-programmed time period
between automatically printed Fax
Journal Reports. You can print the Fax
Journal on demand without interrupting
the cycle.
External phone
A telephone that is plugged into the EXT
jack of your machine.
F/T Ring Time
The length of time that the Brother
machine rings (when the Receive Mode
setting is Fax/Tel) to notify you to pick up
a voice call that it answered.
Fax Receive Code
Press this code (l 5 1) when you answer
a fax call on an extension or external
phone.
Fax tones
The signals sent by sending and receiving
fax machines while communicating
information.
Fax/Tel
You can receive faxes and telephone
calls. Do not use this mode if you are
using a telephone answering device
(TAD).
Fine resolution
Resolution is 203 × 196 dpi. It is used for
small print and graphs.
Gray scale
The shades of gray available for copying,
scanning, and faxing photographs.
Group number
A combination of Speed-Dial numbers
that are stored in a Speed-Dial location for
Broadcasting.
Help list
A printout of the complete Menu table that
you can use to program your machine
when you do not have the User's Guide
with you.
LCD (liquid crystal display)
The display screen on the machine that
shows interactive messages during
On-Screen Programming and shows the
date and time when the machine is idle.
Manual fax
Depending on your model, you can lift the
handset, cordless handset, or handset of
the external telephone or you can press
Hook or Speaker Phone to hear the
receiving fax machine answer before you
press Black Start or Color Start to begin
seding.
Menu mode
Programming mode for changing your
machine's settings.
OCR (optical character recognition)
The bundled ScanSoft® Paperport® SE
with OCR or Presto!® PageManager®
software application converts an image of
text to text you can edit.
Out of Paper Reception
Receives faxes into the machine's
memory when the machine is out of paper.
Overseas Mode
Makes temporary changes to the fax
tones to accommodate noise and static on
overseas phone lines.
Pause
Allows you to place a 3.5 second delay in
the dialing sequence stored on
Speed-Dial numbers. Press
Redial/Pause as many times as needed
for longer pauses.
145
PhotoCapture Center®
Allows you to print digital photos from your
digital camera at high resolution for photo
quality printing.
Photo resolution
A resolution setting that uses varying
shades of gray for the best representation
of photographs.
PictBridge
Allows you to print photos directly from
your digital camera at high resolution for
photo quality printing.
Pulse (Canada only)
A form of rotary dialing on a telephone
line.
Quick Dial List
A listing of names and numbers stored in
Speed-Dial memory, in numerical order.
Real Time Transmission
When memory is full, you can send faxes
in real time.
Remaining jobs
You can check which jobs are waiting in
memory and cancel jobs individually.
Resolution
The number of vertical and horizontal lines
per inch. See: Standard, Fine, Super Fine
and Photo.
Ring Delay
The number of rings before the machine
answers in Fax Only and Fax/Tel
modes.
Ring Volume
Volume setting for the machine's ring.
Scanning
The process of sending an electronic
image of a paper document into your
computer.
Search
An electronic, alphabetical listing of stored
Speed-Dial and Group numbers.
146
Speed-Dial
A pre-programmed number for easy
dialing. You must press
Search/Speed Dial, # the two digit code,
and Black Start or Color Start to start the
dialing process.
Standard resolution
203 × 97 dpi. It is used for regular size text
and quickest transmission.
Station ID
The stored information that appears on
the top of faxed pages. It includes the
sender's name and fax number.
Super Fine resolution
392 × 203 dpi. Best for very small print
and line art.
TAD (telephone answering device)
You can connect an external device or
answering machine to the EXT. jack of
your machine.
Telephone Answer Code
(For Fax/Tel mode only)
When the machine answers a voice call, it
pseudo/double-rings. You can pick up at
an extension phone by pressing this code
(# 5 1).
Temporary settings
You can choose certain options for each
fax transmission and copy without
changing the default settings.
Tone
A form of dialing on the telephone line
used for Touch Tone telephones.
Transmission
The process of sending faxes over the
phone lines from your machine to the
receiving fax machine.
Transmission Verification Report
A listing for each fax sent, that shows its
date, time and number.
User Settings
A printed report that shows the current
settings of the machine.
F
Index
A
Accessories and supplies ......................... iii
ADF (automatic document feeder) .... 10, 30
ADF cover ..............................................109
Answering machine (TAD) .......................45
connecting ............................................45
Apple® Macintosh®
See Software User's Guide on the
CD-ROM. ..................................................
Automatic
fax receive ............................................37
Easy Receive .....................................39
B
Broadcasting ............................................31
setting up Groups for ............................52
Brother
accessories and supplies ....................... iii
Brother numbers ...................................... i
Customer Service .................................... i
FAQs (frequently asked questions) ......... i
fax back system ...................................... ii
product support ........................................ i
Solutions Center ...................................... i
warranties .................................... iv, v, vii
C
Caller ID ...................................................44
print list .................................................44
view list .................................................44
Canceling
Fax Forwarding .....................................60
Fax Storage ..........................................57
jobs awaiting redial ...............................35
Paging ...................................................60
Cleaning
paper pick-up roller .............................117
print head ............................................117
printer platen .......................................116
scanner ...............................................116
Clear/Back key ...........................................8
Connecting
external TAD .........................................45
external telephone ................................48
two-line external TAD or telephone ...... 47
Consumable items ................................. 142
Control panel overview .............................. 6
ControlCenter
See Software User's Guide on the
CD-ROM. .................................................
Copy
brightness ............................................. 71
color adjustment ................................... 71
contrast ................................................ 71
enlarge/reduce ..................................... 68
enter Copy mode .................................. 66
keys ...................................................... 67
multiple ................................................. 66
N in 1 (page layout) .............................. 69
Options key
paper size .......................................... 72
paper type ......................................... 72
paper .................................................... 72
Quality key ........................................... 67
single .................................................... 66
sort ....................................................... 70
temporary settings ................................ 67
tray use (MFC-5860CN only) ............... 25
using ADF ............................................ 66
Copy Options key
Paper Size ............................................ 72
Paper Type ........................................... 72
Cordless phone ....................................... 48
Custom telephone features on
a single line ........................................... 103
D
Dialing
a pause ................................................ 51
access codes and credit card
numbers ......................................... 52, 53
Groups ................................................. 31
manual ................................................. 50
Speed-Dial ........................................... 50
Distinctive Ring ........................................ 42
setting ring pattern ............................... 43
turning off ............................................. 43
Dual Access ............................................ 34
147
E
Easy Receive ...........................................39
Enlarge/Reduce key .................................68
Envelopes ................................... 14, 19, 20
Error messages on LCD ........................105
Change Unable ...................................105
Clean Unable ......................................105
Comm. Error .......................................105
document jam .....................................106
Init. Unable ..........................................106
Ink Empty ............................................106
Near Empty .........................................107
No Paper Fed ......................................107
Not Registered ......................................50
Out of Memory ....................................107
Print Unable ........................................107
Scan Unable .......................................108
Extension telephone, using ......................48
External telephone, connecting ................48
F
Fax codes
changing ........................................ 49, 58
Fax Receive Code ......................... 39, 48
Remote Access Code ...........................58
Telephone Answer Code ......................48
Fax Forwarding
changing remotely .......................... 59, 60
programming a number .........................54
Fax Storage .............................................55
turning on ..............................................55
Fax, from PC
See Software User's Guide on the
CD-ROM. ..................................................
Fax, stand-alone
enter Fax mode .....................................23
receiving ................................................37
at end of conversation ................. 38, 40
difficulties .................................. 99, 101
Easy Receive .....................................39
F/T Ring Time, setting ........................39
Fax Forwarding ..................................60
from extension phone ........................48
Paging ................................................54
phone line interference ....................112
Receive Mode, choosing ....................37
reducing to fit on paper ......................40
148
retrieving from a remote site .............. 59
Ring Delay, setting ............................ 38
tray use (MFC-5860CN only) ............ 24
sending ........................................... 30, 63
at end of conversation ....................... 36
Broadcasting ..................................... 31
canceling from memory ..................... 35
color fax ............................................. 31
contrast ............................................. 33
delayed batch transmission ............... 35
delayed fax ........................................ 35
enter Fax mode ................................. 30
from memory (Dual Access) .............. 34
from scanner glass ............................ 30
manual .............................................. 36
overseas ............................................ 34
phone line interference .................... 112
Real Time Transmission .................... 34
redial ................................................. 51
Resolution ......................................... 33
Fax/Tel mode
answering at extension phones ............ 48
double-ringing (voice calls) ................... 39
F/T Ring Time ....................................... 39
Fax Receive Code ................................ 48
Ring Delay ............................................ 38
Telephone Answer Code ...................... 48
FCC notices ............................................. 94
G
Gray scale ..................................... 136, 139
Groups for Broadcasting ......................... 52
H
HELP
LCD messages ................................... 122
using menu keys ............................. 122
Menu Table ........................................ 122
Hook key ........................................... 26, 36
I
Ink cartridges
checking ink volume ........................... 119
ink dot counter .................................... 113
replacing ............................................. 113
Ink key ...................................117, 118, 119
J
P
Jacks
convert to RJ11 jack
triplex adapter ....................................46
EXT
external telephone .............................45
TAD (answering machine) .................46
Jams
document ............................................109
paper ...................................................109
Packing the machine ............................. 120
Paging ..................................................... 54
Paper ............................................... 12, 135
capacity ................................................ 15
document size ................................ 10, 30
loading .................................................. 18
envelopes and post cards ................. 19
size ....................................................... 24
type ................................................ 14, 23
Paper Type key (MFC-5460CN only) ...... 72
PaperPort® SE with OCR
See Software User's Guide on the
CD-ROM. .................................................
Phone line
connections .......................................... 45
difficulties ........................................... 101
multi-line (PBX) .................................... 47
roll over lines ........................................ 46
two-line phone system ......................... 46
Phone line interference ......................... 112
Photo paper .................................12, 13, 70
PhotoCapture Center®
Borderless ............................................ 80
CompactFlash ® .................................... 74
Cropping ............................................... 80
DPOF printing ...................................... 78
from PC
See Software User's Guide on the
CD-ROM. ..............................................
Memory Stick Pro™ ............................. 74
Memory Stick® ..................................... 74
MultiMediaCard™ ................................ 74
Print settings
Brightness ......................................... 79
Contrast ............................................. 79
Paper type & size .............................. 79
Print speed & quality ......................... 79
Quality ............................................... 79
True2Life ........................................... 79
SecureDigital™ .................................... 74
specifications ...................................... 138
xD-Picture Card™ ................................ 74
PictBridge
DPOF Printing ...................................... 84
Polling ...................................................... 63
Power failure ......................................... 122
L
LCD (liquid crystal display) ....................122
Contrast ................................................26
Help List ................................................62
M
Macintosh®
See Software User's Guide on the
CD-ROM. ..................................................
Maintenance, routine .............................113
Manual
dialing ...................................................50
receive ..................................................37
transmission ..........................................36
Memory Storage ....................................122
Menu keys ..............................................122
Menu Table ............................................122
Mode, entering
Copy .....................................................66
Fax ........................................................30
PhotoCapture .......................................... 8
Scan ........................................................ 8
Multi-line connections (PBX) ....................47
O
On/Off key ................................................22
Options key (copying) ..............................69
brightness .............................................71
N in 1 copies or a poster .......................69
sort ........................................................70
Out of Area (Caller ID) .............................44
Out of Memory message ..........................36
149
Print
area .......................................................21
checking alignment .............................119
difficulties ..................................... 99, 101
drivers .................................................140
improving quality ........................ 117, 118
paper jams ..........................................110
reports ...................................................62
resolution ............................................140
specifications ......................................140
Printing
images ..................................................77
index .....................................................76
See Software User's Guide on the
CD-ROM. ..................................................
Programming your machine ...................122
Q
Quality key (copying) ...............................67
Quick-Dial
Access codes and credit card
numbers ......................................... 52, 53
Broadcasting .........................................31
using Groups ......................................31
Group dial
changing ............................................52
setting up Groups for Broadcasting ...52
Search ...................................................50
Speed-Dial
changing ............................................52
setting up by location .........................51
using ..................................................50
R
Receive Mode ..........................................37
External TAD .........................................37
Fax Only ................................................37
Fax/Tel ..................................................37
Manual ..................................................37
Redial/Pause key .....................................51
Reducing
copies ....................................................68
incoming faxes ......................................40
Remote Retrieval .....................................58
access code ..........................................58
commands ............................................60
getting your faxes ..................................59
150
Remote Setup
See Software User's Guide on the
CD-ROM. ..................................................
Reports .................................................... 61
Caller ID List ......................................... 44
Fax Journal ........................................... 62
Journal Period ................................... 61
Help List ............................................... 62
how to print ........................................... 62
Quick-Dial List ...................................... 62
Transmission Verification ............... 61, 62
User Settings ........................................ 62
Resolution
copy .................................................... 137
fax ....................................................... 136
print .................................................... 140
scan ............................................ 138, 139
setting for next fax ................................ 33
Resolution key ......................................... 33
Ring Delay, setting .................................. 38
S
Safety Instructions ................................... 93
Scanning
See Software User's Guide on the
CD-ROM. ..................................................
Serial Number
how to find .............See inside front cover.
Shipping the machine ............................ 120
Speed-Dial
changing ............................................... 52
dialing ................................................... 50
storing ................................................... 51
T
TAD (telephone answering device),
external ........................................37, 45, 47
connecting ............................................ 45
receive mode ........................................ 37
recording OGM ..................................... 46
with two-line jack .................................. 47
Temporary copy settings ......................... 67
Text, entering ........................................ 132
special characters .............................. 132
Transferring your faxes or Fax Journal
report ..................................................... 108
Transparencies ..................... 12, 13, 14, 15
Tray Select key (MFC-5860CN only) .......72
Troubleshooting .......................................99
checking ink volume ...........................119
document jam .....................................109
error messages on LCD ......................105
if you are having difficulty
copying ............................................103
incoming calls ..................................102
Network ............................................104
phone line or connections ................101
PhotoCapture Center® .....................104
printing ...............................................99
printing received faxes .....................101
receiving faxes .................................102
scanning ..........................................103
sending faxes ...................................102
software ...........................................103
paper jam ............................................110
print quality ................................ 117, 118
Two-line phone system ............................46
TX Lock ....................................................28
V
Volume, setting
beeper ...................................................25
ring ........................................................25
speaker .................................................26
W
Warranties ................................................. iv
Canada ................................................. vii
Notice-Disclaimer ................................... iv
USA ........................................................ v
Windows®
See Software User's Guide on the
CD-ROM. ..................................................
World Wide Web ......................................... i
151
EQUIPMENT ATTACHMENT LIMITATIONS
(Canada only)
NOTICE
This product meets the applicable Industry Canada technical specifications.
NOTICE
The Ringer Equivalence Number is an indication of the maximum number of devices allowed to
be connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the RENs of all the devices
does not exceed five.
Brother International Corporation
100 Somerset Corporate Boulevard
P.O. Box 6911
Bridgewater, NJ 08807-0911 USA
Brother International Corporation (Canada) Ltd.
1 rue Hôtel de Ville,
Dollard-des-Ormeaux, QC, Canada H9B 3H6
Visit us on the World Wide Web
http://www.brother.com
These machines are made for use in the USA and Canada only. We cannot recommend using
them overseas because it may violate the Telecommunications Regulations of that country and
the power requirements of your machine may not be compatible with the power available in foreign
countries. Using USA or Canada models overseas is at your own risk and may void your
warranty.
USA/CAN