Specifications | Bryant 542E Heat Pump User Manual

COMMERCIAL
SINGLE PACKAGE ROOFTOP
STANDARD AND HIGH EFFICIENCY
HEAT PUMP UNITS
Models 542J, 548F, 549B
Sizes 036-180
DuraPac and DuraPac Plus
3 to 15 Tons
548F090-120
549B090-120
548F036-072
549B036-072
542J150,180
Standard-efficiency (548F), and high-efficiency (542J and
549B) heat pump units with:
• Pre-painted galvanized steel cabinet for long life and quality
appearance
• Commercial strength base rails with built-in rigging capability
• Convertible design for vertical or horizontal supply/return
• Non-corrosive, sloped condensate drain pan, meets
ASHRAE 62 (IAQ)
• Two-inch return-air filters
• A wide assortment of factory-installed options available,
including high static drives that provide additional performance range
• Optional gear driven EconoMi$er with CO2 ventilation control
(2 to 10 vac actuator)
• Optional gear-driven EconoMi$er with 4 to 20 mA actuator for
EMS controls
• State-of-the-art defrost system
• Dependable 4-way valve operation
Heat Options
• Field-installed electric heat available
• Glycol hydronic coils
FEATURES/BENEFITS
Every compact one-piece unit arrives fully assembled,
charged, tested, and ready to run.
QUIET, EFFICIENT OPERATION AND DEPENDABLE PERFORMANCE — Compressors have vibration isolators for quiet
operation. Efficient fan and motor design permits operation at
low sound levels.
Unit sizes 090-180 offer lower utility costs through part-load
operation using 2 stages of cooling.
Quiet and efficient operation is provided by belt-driven indoor
fans (standard on all units over 5 tons). The belt-driven indoor
fan is equipped with variable-pitch pulleys which allow adjustment within the rpm ranges of the factory-supplied pulleys.
Increased operating efficiency is achieved through computerdesigned coils featuring staggered internally enhanced copper
tubes. Fins are ripple-edged for strength, lanced, and double
waved for higher heat transfer.
Form No. PDS 548F.36.4
TABLE OF CONTENTS
All units feature a base rail design with forklift slots and rigging
holes for easier maneuvering. Durable packaging protects all
units during shipment and storage.
The units can be easily converted from a vertical to a horizontal
duct configuration by relocating the panels supplied with the
unit.
To Convert 036-120 Units from vertical to horizontal discharge,
simply relocate 2 panels. The same basic unit can be used for
a variety of applications and can be quickly modified at the
jobsite.
To Convert 150,180 Units from vertical to horizontal discharge,
use the optional horizontal supply/return adapter roof curb.
Convenient Duct Openings in the unit basepans permit sideby-side or concentric duct connections (see Application Data
section) without requiring internal unit modification (150,180
only).
NOTE: On units using horizontal supply and return, the accessory barometric relief or power exhaust MUST be installed on
the return ductwork.
Thru-the-bottom service connection capability comes standard
with the rooftop unit to allow power and control wiring to be
routed through the unit’s basepan, thereby minimizing roof penetrations (to prevent water leaks). Power and control connections are made on the same side of the unit to simplify
installation.
The Non-Corrosive Sloped Condensate Drain Pan permits
either an external horizontal side condensate drain (outside the
roof curb) or an internal vertical bottom drain (inside the roof
curb). Both options require an external, field-supplied P-trap.
Standard 2-in. Throwaway Filters are easily accessed
through a removable panel located above the air intake hood.
No tools are required to change unit filters.
All 036-120 Units are Designed with a Single, Continuous
Top Piece to eliminate leaking at the seams or gasketing.
Belt-Driven Indoor-Fan Motors allow maximum on-site flexibility without changing motors or drives.
Field-Installed Accessory Electric heaters are available in a
wide range of capacities. An available single-point wiring kit
makes installation simple.
Low Voltage Wiring Connections are easily made due to the
large terminal board which is located for quick, convenient
access.
In addition, color-coded wires permit easy tracing and
diagnostics.
PROVEN COMPRESSOR RELIABILITY
Design techniques feature computer-programmed balance
between compressor, condenser, and evaporator. Bryantspecified hermetic compressors are equipped with compressor
overcurrent and overtemperature protection to ensure
dependability.
All units have a fixed-orifice (036-120) or TXV metering
device (150,180) which precisely controls refrigerant flow, preventing slugging and flood-back, while maintaining optimum unit
performance. Refrigerant filter driers are standard.
Standard Low Ambient Cooling Operation to 25 F (036-120)
or 40 F (150,180); optional head pressure control kit available
for outdoor ambient conditions to –20 F.
Page
Features/Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Options and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-14
Application Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14,15
Typical Piping and Wiring . . . . . . . . . . . . . . . . . . . . . . . . . 16,17
548F036-120
Model Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . .18
ARI Capacity Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Physical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19,20
Base Unit Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 21,22
Accessory Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 23,24
Selection Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-55
Electrical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56-64
Typical Wiring Schematic . . . . . . . . . . . . . . . . . . . . . . . . . 65,66
549B036-120
Model Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . .67
ARI Capacity Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Physical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68,69
Base Unit Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 70,71
Accessory Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 72,73
Selection Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-90
Electrical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91-94
Typical Wiring Schematic . . . . . . . . . . . . . . . . . . . . . . . . . 95,96
Guide Specifications — 548F and 549B036-120 Units . . 97-100
542J150,180
Model Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . .101
ARI Capacity Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Physical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102,103
Base Unit Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Accessory Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . 105-107
Selection Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109-114
Electrical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Typical Wiring Schematic . . . . . . . . . . . . . . . . . . . . . . . 115-117
Guide Specifications — 542J150,180 . . . . . . . . . . . . . 118-121
DURABLE, DEPENDABLE CONSTRUCTION — Designed for
durability in any climate, the weather-resistant cabinets are constructed of galvanized steel and bonderized, and all exterior
panels are coated with a prepainted baked enamel finish. The
paint finish is non-chalking, and is capable of withstanding
ASTM B117 500-hour Salt Spray Test. All internal cabinet panels are primed, permitting longer life and a more attractive
appearance for the entire unit.
In addition, all size 036-120 units are designed with a single,
continuous top piece to eliminate any possible leaks. Totally
enclosed condenser-fan motors and permanently lubricated
bearings provide additional unit dependability.
Patented State-of-the-Art Chronotemp™ Defrost System
uses time and temperature to keep the outdoor coil frost-free for
economical, dependable operation. The Chronotemp defrost
board can be easily configured for defrost cycles every 30, 50, or
90 minutes.
Dependable 4-Way Valve Operation safely and efficiently
accomplishes cycle reversals, defrost, and normal operation.
EASY INSTALLATION AND CONVERSION
All Units are Shipped in the Vertical Duct Configuration for
fit-up to standard roof curbs. (3 different curb sizes fit unit sizes
036-072, 090-120, 150 and 180 respectively.) The contractor
can order and install the roof curb early in the construction
stage, before decisions on size requirements are made.
2
INTEGRATED ECONOMI$ERS AND OUTDOOR AIR
Optional EconoMi$ers and manual outdoor-air dampers introduce outdoor air which mixes with the conditioned air, improving
indoor-air quality and often reducing energy consumption.
During a first stage call for cooling, if the outdoor-air temperature is below the economizer control changeover set point, the
discharge-air sensor modulates the economizer outdoor-air
damper open to take advantage of free cooling provided by the
outside air. When second-stage cooling is called for, the compressor is energized in addition to the economizer. If the
outdoor-air temperature is above the changeover set point, the
first stage of compression is activated and the economizer stays
at vent position.
Accessory upgrade kits allow for either outdoor air enthaply
changeover or for more precise differential enthalpy control.
Units can also utilize the factory or field-installed EconoMi$er.
The EconoMi$er is microprocessor controlled and incorporates
a parallel, opposed-blade gear driven damper system. In addition, it has a spring return built into the damper actuator to provide reliable close-on-power-loss. The EconoMi$er comes
equipped with up to 90% barometric relief capability for high
outdoor airflow applications on 036-120 units only. Optional
field-installed Barometric Relief package is available for use on
150,180 size units.
In addition, the EconoMi$er two-stage power exhaust accessory can be utilized to help maintain proper building pressure
(036-120 units only). Single stage power exhaust is available for
unit sizes 150,180 as a field-installed accessory.
For units without economizer, year-round ventilation is
enhanced by a manual outdoor-air damper. On 036-120 units, a
25% or 50% manual damper is available as a field-installed
accessory. Unit sizes 150,180 are equipped with a standard
manual 25% damper.
SERVICE OPTIONS
Servicing a rooftop unit has never been easier with the new
factory-installed service options for these rooftop units. These
options include the following:
• Hinged access panels are provided for the filter/indoor-fan
motor, compressors, indoor fan, and control box areas. Quick
access to major components is accomplished by simply
unlatching and swinging open the various panels. Each
hinged panel is permanently mounted to the unit, thereby
eliminating the concern of a dropped or wind-blown panel
puncturing delicate roof materials. The 4 extended access
panels are also equipped with ‘‘tie back’’ retaining devices to
hold the door in the open position while servicing the unit.
• An external, covered, 115-v Ground Fault Interrupt (GFI)
receptacle is provided as a convenient power source for drills,
lights, refrigerant recovery units, or other electrical service
tools. Simply connect the outlet to a field-supplied and properly fused branch circuit power supply.
• An integral non-fused disconnect switch within the rooftop unit
reduces installation time, labor and material costs. Safety is
assured by an interlock which prevents access to the control
box unless the switch is in the OFF position. In addition, the
externally mounted handle incorporates power lockout capability to further protect service personnel.
INDOOR-AIR QUALITY BEGINS WITH BRYANT ROOFTOPS
Sloped condensate pans minimize biological growth in rooftop
units in accordance with ASHRAE (American Society of Heating, Refrigeration, and Air Conditioning Engineers) Standard
62. Two-inch filters with optional dirty filter indicator switch provide for greater particle reduction in the return air. The face-split
evaporator coils improve the dehumidification capability of standard units, maximize building humidity control.
3
OPTIONS AND ACCESSORIES
ITEM
100% Open Two-Position Damper (036-120)
25% Open Two-Position Damper
Alternate Motors and Drives (548F036-120)
Barometric Relief Damper (150 and 180 only, not for use with horizontal roof curb)
Convenience Outlet 115V
Copper fins indoor and outdoor coil
Copper fins outdoor coil
Double Wall in unit airstream (150,180)
E-Coat outdoor coil (Aluminum Fin)
E-Coat outdoor coil (Copper Fin)
EconoMi$er
EconoMi$er with Power Exhaust
Electric Heat
Electronic Programmable Thermostat
Emergency Heat Package
Enthalpy or differential enthalpy sensor
Fan/Filter Status
High-Static Motor and Drive (548F036-120)
Hinged Access Panels (549B036-120 and 542J150,180)
Horizontal Adapter Curb (150,180)
Hot Gas Bypass (150,180)
Hydronic Glycol Coil (150,180)
Johnson METASYS Control
Manual Outdoor-Air Damper (25% Open) (036-120)
Manual Outdoor-Air Damper (50% Open) (036-120)
Motormaster® Head Pressure Control (Cycle Control or Fan Speed Modulation)
Novar Control
Outdoor Air Enthalpy Sensor (EconoMi$er Only)
Outdoor Coil Grille (036-120)
Outdoor Coil Hail Guard Assembly
Power Exhaust (no barometric relief on sizes 150,180)
Power Exhaust Transformer for 460 or 575 v (036-120)
Power Exhaust with Barometric Relief (036-120)
Precoat Al. Fins on outdoor coil
Return Air Enthalpy Sensor (EconoMi$er Only)
Return Air Temperature Sensor (EconoMi$er Only)
Roof Curbs (Vertical and Horizontal Discharge)
Smoke Detectors
Stainless Steel Condensate Pan (150,180)
Thermostats and Subbases
Thru-the-Bottom Utility Connections
Time Guard® II Control Circuit
Unit-Mounted Non-Fused Disconnect
UVC Lamps
Winter Start Time Delay (150,180)
*Factory-installed.
†Field-installed.
**Special order/DEC only.
NOTES:
1. Refer to unit price pages or contact your local representative for
accessory/and option package information.
2. Some options may increase product lead times.
4
OPTION*
ACCESSORY†
X
X
X
X
X
X
X
X**
X
X
X
X
X
X
X
X
X
X
X
X
X
X**
X
X**
X
X
X
X**
X
X
X
X
X
X
X
X
X
X
X**
X**
X
X
X
X
X**
X
X
OPTIONS AND ACCESSORIES (cont)
LOW AMBIENT CONTROLS
Standard units are designed to operate in cooling at outdoor temperatures down to 25 F (for size 036-120 units) and 40 F (for size 150,180 units).
With accessory Motormaster control (outdoor-fan cycling) units can operate at outdoor temperatures down to –20 F. The head pressure controls,
which mount in the outdoor section, control the outdoor-fan motor to maintain correct condensing temperature.
MOTORMASTER IV CONTROL
(OUTDOOR FAN CYCLING
MOTORMASTER I, III CONTROL
(OUTDOOR FAN SPEED MODULATOR)
MOTORMASTER II CONTROL
(OUTDOOR FAN CYCLING)
EMERGENCY HEAT CONTROL PACKAGE
BAROMETRIC RELIEF/POWER EXHAUST
(150,180 shown)
When used with accessory/optional economizer, the barometric relief or
power exhaust accessory helps to relieve building overpressurization.
NOTE: This is not available with horizontal supply adapter curb.
5
Emergency heat control package allows emergency operation of
electric heat and fans by bypassing compressor circuits and outdoor thermostats.
OPTIONS AND ACCESSORIES (cont)
DURA-SHIELD OUTDOOR COIL OPTIONS
Outdoor coil options are available to match coil construction to site conditions for the best corrosion durability. Pre-coated coils provide protections
in mild coastal environments. All copper coils are best suited for moderate coastal applications, while E-coated coils provide superior protection in
severe coastal and industrial applications.
OUTDOOR COIL PROTECTION APPLICATIONS
DESCRIPTION
(Dura-Shield Option)
Standard, Al/Cu
Pre-Coated Al/Cu
Cu/Cu
E-Coated Al/Cu
E-Coated Cu/Cu
Al/Cu
Cu/Cu
Dura-Shield
E-Coated
Pre-Coated
—
—
—
—
—
Standard,
Non-Corrosive
X
ENVIRONMENT
Moderate
Severe
Coastal
Coastal
Mild
Coastal
Combined Coastal
and Industrial
Industrial
X
X
X
X
X
LEGEND
Aluminum Fin with Copper Tube Coil
Copper Fin with Copper Tube Coil
Family of Coil Protection Options
Extremely flexible and durable epoxy coating uniformly applied to the coil surfaces.
Epoxy Coating Applied to Fin Stock Material
ECONOMI$ER (036-120 shown)
ELECTRIC HEATERS
ECONOMI$ER
PLUG
CONTROLLER
GEAR-DRIVEN
DAMPER
ACTUATOR
OUTDOOR AIR
TEMPERATURE
SENSOR
BAROMETRIC
RELIEF DAMPERS
Electric heaters (and single point kits) are available in a wide range of capacities for factory or
field installation.
Factory-installed EconoMi$er utilizes a microprocessor-based control, gear drive damper system, low pressure drop characteristics,
built-in spring return (for close upon power loss), and an integral
barometric damper.
ECONOMI$ER MICROPROCESSOR CONTROLLER
ECONOMI$ER
STEPPER MOTOR
4-20 mA ECONOMI$ER ACTUATOR
(use for EMS Interface)
AD-DME1711-1
500
1400
10°
1000
20° A
OFF
30°
B
20
0
40
C 100 80
1200 60° 50° 40° D
MECH C LO
ECON
MIN
LOCKOUT
5P
POS (%)
CO 2 SP
(FFM)
CONFIG
60
STATUS
Inputs for Dry Bulb, Enthalpy, Differential Temperature or Enthalpy, or Potentiometer
6
OPTIONS AND ACCESSORIES (cont)
UNIT-MOUNTED DISCONNECT (sizes 036-120)
UNIT-MOUNTED DISCONNECT (sizes 150,180)
Factory-installed, internally mounted, NEC (National Electrical
Code) and UL (Underwriters’ Laboratories) approved non-fused
switch provides unit power shutoff with disconnect lockout protection capability. The switch is accessible from outside the unit.
CONVENIENCE OUTLET
Factory-installed, internally mounted and externally accessible
115-v female receptacle. Includes 15-amp GFI (Ground Fault
Interrupter) receptacle with independent fuse protection. Voltage
required to operate convenience outlet is provided by a fieldinstalled transformer (150,180 units).
GLYCOL COIL (150,180 only)
Factory-installed, internally-mounted, NEC (National Electrical Code) and UL (Underwriters’ Laboratories) approved
non-fused switch provides unit power shutoff with disconnect lockout protection capability. The control box access
door is interlocked with the non-fused disconnect. The nonfused disconnect must be in the OFF position to open this
door. The switch is accessible from outside the unit.
Glycol coil is intended for add-on type applications or new work
where a boiler system is available. Glycol coil and electric heat cannot be installed together.
7
OPTIONS AND ACCESSORIES (cont)
OUTDOOR COIL GRILLE (036-120 only)
HAIL GUARD
Outdoor coil hail guard accessory (field installed) protects coils
against damage from hail and other flying debris.
Coil guard grille protects coils against large objects and vandalism.
CONTROL BOX HINGED PANEL OPTION,
549B090-120 UNITS SHOWN
BRYANT COMMERCIAL PROGRAMMABLE THERMOSTAT
Designed specifically for use with Bryant commercial systems, this Bryant
programmable thermostat features LED occupied/unoccupied displays
and setback mode which can override continuous fan operation.
COMPRESSOR HINGED PANEL OPTION,
549B090-120 UNITS SHOWN
NOTE: Hinged access panels are not available on 548F units.
8
COMPRESSOR HINGED PANEL OPTION,
549B036-072 UNITS SHOWN
OPTIONS AND ACCESSORIES (cont)
FILTER HINGED PANEL OPTION (549B036-120)
INDOOR-FAN HINGED PANEL OPTION (549B036-120)
This is included as a factory-installed option. It permits quick and simple indoor-fan access.
NOTE: Hinged access panels are not available on
548F units.
This is included as a factory-installed option. It permits tool-less
filter access.
9
CONTROLS
with mechanical cooling. This is accomplished by the strategies
below.
NOTE: Compressor has a 2-minute Minimum On, Minimum Off,
and Interstage delay timer.
1. If Y1 is energized, and the room thermostat calls for Y2
(2-stage thermostat), the compressor and OFM are energized. The EconoMi$er damper is maintained at its current
position.
2. If Y1 is energized for more than 20 minutes, and Y2 is not
energized (whether or not a 2-stage thermostat is used),
the compressor and OFM are energized. The EconoMi$er
damper is maintained at its current position.
3. If Y1 is energized, and the compressor is already energized
(see Step 2) and the room thermostat calls for Y2, the compressor continues to operate.
4. If compressor is energized and the thermostat is satisfied,
the compressor, the OFM, and IFM are deenergized and
the EconoMi$er modulates closed.
When the OAT is below the MECH CLG LOCKOUT set point,
the compressors remain off.
Cooling, Units With EconoMi$er (548F090-120 and
549B090,120) — When the outdoor-air temperature (OAT) is
above the ECON SP set point and the room thermostat calls for
Stage 1 cooling (R to G + Y1), the indoor-fan motor (IFM)
is energized and the EconoMi$er damper modulates to minimum position. The compressor contactor is energized to start
the compressor and outdoor-fan motor (OFM) and RVS1
(reversing valve solenoid). After the thermostat is satisfied, the
damper modulates to the fully closed position when the IFM is
deenergized.
When the OAT is below the ECON SP setting and the room
thermostat calls for Stage 1 cooling (R to G + Y1), the
EconoMi$er modulates to the minimum position when the IFM
is energized. The EconoMi$er provides Stage 1 of cooling by
modulating the return and outdoor-air dampers to maintain a
55 F supply air set point. If the supply-air temperature (SAT) is
greater than 57 F, the EconoMi$er modulates open, allowing a
greater amount of outdoor air to enter the unit. If the SAT drops
below 53 F, the outdoor air damper modulates closed to reduce
the amount of outdoor air. When the SAT is between 53 and
57 F, the EconoMi$er maintains its position.
If outdoor-air alone cannot satisfy the cooling requirements of
the conditioned space, and the OAT is above the MECH CLG
LOCKOUT set point, the EconoMi$er integrates free cooling
with mechanical cooling. This is accomplished by the strategies
below.
NOTE: Compressors have a 2-minute Minimum On, Minimum
Off, and Interstage delay timer.
1. If Y1 is energized, and the room thermostat calls for Y2
(2-stage thermostat), compressor no. 1 and OFM are energized. The EconoMi$er damper is maintained at its current
position.
2. If Y1 is energized for more than 20 minutes, and Y2 is not
energized (whether or not a 2-stage thermostat is used),
compressor no. 1 and OFM are energized. The EconoMi$er
damper is maintained at its current position.
3. If Y1 is energized, and compressor no. 1 is already energized (see Step 2) and the room thermostat calls for
Y2, compressor no. 1 continues to operate. If Y2 remains
energized for more than 20 minutes, compressor no. 2 is
energized.
OPERATING SEQUENCE — 548F036-120 AND 549B036-120
Cooling, Units Without Economizer — When thermostat calls
for cooling, terminals G and Y1 are energized. The indoor-fan
contactor (IFC), reversing valve solenoid (RVS1) and compressor contactor no. 1 (C1) are energized and indoor-fan motor,
compressor no. 1, and outdoor fans start. The outdoor-fan
motor(s) run continuously while unit is cooling. On 548F090120 units, if the thermostat calls for a second stage of cooling
by energizing Y2, compressor contactor no. 2 (C2) and reversing valve solenoid (RVS2) are energized and compressor no. 2
starts.
Heating, Units Without Economizer (548F036-072 and
549B036-072) — Set system switch at AUTO. or HEAT position.
Set thermostat at desired temperature.
When the thermostat calls for heat, the IFC, outdoor-fan contactor (OFC), and compressor contactor are energized. The
RVS is deenergized and switches position, and the indoor fan,
outdoor fan, and compressor are energized.
If the thermostat calls for a second stage of heat, the heater
contactor (HC) is energized and starts the electric heaters.
When the space temperature approaches the heating temperature set point, heating stages cycle off. The reversing valve
solenoid is reenergized.
Heating, Units Without Economizer (548F090-120 and
549B090,120) — Upon a request for heating from the space
thermostat, terminal W1 will be energized with 24 v. The IFC,
outdoor-fan contactor (OFC), C1, and C2 will be energized. The
reversing valves switch position and the indoor fan, outdoor fan,
compressor no. 1, and compressor no. 2 are energized.
If the space temperature continues to fall while W1 is energized, W2 will be energized with 24 v, and the heater contactor(s) (HC) will be energized, which will energize the electric
heater(s).
When the space thermostat is satisfied, W2 will be deenergized first, and the electric heater(s) will be deenergized.
Upon a further rise in space temperature, W1 will be deenergized, and the reversing valve solenoids (RVS1 and RVS2) will
be energized.
Cooling, Units With EconoMi$er (548F036-072 and 549B036072) — When the outdoor-air temperature (OAT) is above the
ECON SP set point and the room thermostat calls for Stage 1
cooling (R to G + Y1), the indoor-fan motor (IFM) is energized
and the EconoMi$er damper modulates to minimum position.
The compressor contactor is energized to start the compressor
and outdoor-fan motor (OFM) and RVS1 (reversing valve solenoid). After the thermostat is satisfied, the damper modulates to
the fully closed position when the IFM is deenergized.
When the OAT is below the ECON SP setting and the room
thermostat calls for Stage 1 cooling (R to G + Y1), the
EconoMi$er modulates to the minimum position when the IFM
is energized. The EconoMi$er provides Stage 1 of cooling by
modulating the return and outdoor-air dampers to maintain a
55 F supply air set point. If the supply-air temperature (SAT) is
greater than 57 F, the EconoMi$er modulates open, allowing a
greater amount of outdoor air to enter the unit. If the SAT drops
below 53 F, the outdoor air damper modulates closed to reduce
the amount of outdoor air. When the SAT is between 53 and
57 F, the EconoMi$er maintains its position.
If outdoor-air alone cannot satisfy the cooling requirements of
the conditioned space, and the OAT is above the MECH CLG
LOCKOUT set point, the EconoMi$er integrates free cooling
10
CONTROLS (cont)
NOTE: Compressor no. 2 cannot be energized unless there is a
signal for Y2 from the space thermostat.
4. If compressor no. 2 is energized, and the Y2 signal from the
thermostat is satisfied, compressor no. 1 and 2 are deenergized. Reasserting Y2 will start compressor no. 1 and (after
a 20-minute interstage delay) compressor 2.
5. If compressor no. 1 is energized and the thermostat is satisfied, compressor no. 1, the OFM, and IFM are deenergized
and the EconoMi$er modulates closed.
Heating, Units With Economizer — Upon a call for heat
through W1, the IFC energizes to start the evaporator fan and
the economizer damper blade opens to the minimum position. If
the accessory two-position damper is used, the outdoor-air
damper opens to the minimum position whenever the evaporator fan runs. If unit is equipped with 2 stages of heat, when additional heat is needed a call is made through W2.
As space temperature approaches the heating temperature
set point, heating stages cycle off. Economizer or two-position
damper returns to fully closed position.
Defrost (548F036-072 and 549B036-072) — As frost builds up
on the outdoor coil, the coil temperature drops below 28 F.
When this outdoor-coil temperature drop is sensed by the
defrost thermostat (DFT) and the defrost timer is at the end of a
timed period (adjustable at 30, 50, or 90 minutes), the unit operates in a defrost cycle controlled by the defrost timer and thermostat. During this cycle, the reversing valve solenoid (RVS) is
energized and the outdoor fan shuts off. The electric heaters (if
installed) will be energized.
The unit continues to defrost until the coil temperature as
measured by DFT reaches 65 F, or the duration of defrost cycle
completes a 10-minute period.
At the end of the defrost cycle, the electric heaters (if
installed) and the reversing valve will be deenergized, and the
outdoor-fan motor will be energized. The unit will now operate in
the Heating mode.
If the thermostat is satisfied during a defrost cycle, the unit
will continue in the Defrost mode until the time or temperature
constraints are satisfied.
Defrost (548F090-120 and 549B090,120) — When the temperature of the outdoor coil drops below 28 F as sensed by the
defrost thermostat (DFT2) and the defrost timer is at the end of
a timed period (adjustable at 30, 50, or 90 minutes), reversing
valve solenoids (RVS1 and RVS2) are energized and the OFC
is deenergized. This switches the position of the reversing
valves and shuts off the outdoor fan. The electric heaters (if
installed) will be energized.
The unit continues to defrost until the coil temperature as
measured by DFT2 reaches 65 F, or the duration of defrost
cycle completes a 10-minute period.
During the Defrost mode, if circuit 1 defrosts first, RVS1 will
oscillate between Heating and Cooling modes until the Defrost
mode is complete.
At the end of the defrost cycle, the electric heaters (if
installed) will be deenergized; the reversing valves switch and
the outdoor-fan motor will be energized. The unit will now operate in the Heating mode.
If the space thermostat is satisfied during a defrost cycle, the
unit will continue in the Defrost mode until the time or temperature constraints are satisfied.
SEQUENCE OF OPERATION — 542J150,180
Cooling, Units Without Economizer — With unit main power
on, set thermostat to COOL position and desired room temperature. Set fan switch at AUTO. (on demand) or ON (continuous)
position.
On a rise in room temperature, cooling contactor no. 1 in the
thermostat closes. The indoor and outdoor fan motors start. If
the 5-minute compressor time-delay (CTD) on the defrost board
(DB) is satisfied, then compressor no. 1 (542J180) or unloaded
compressor (542J150) contactor is energized and compressor
will start. Compressor cycles on demand of the thermostat to
satisfy room conditions. Each time the cooling contactor no. 1
opens, the CTD starts the 5-minute delay.
On 542J180 units, with an additional rise in room temperature, cooling contactor no. 2 in the thermostat closes, energizing compressor contactor no. 2. Compressor no. 2 starts and
cycles on demand of the thermostat to satisfy the occupied
space demands.
On 542J150 units, compressor runs fully loaded on a call for
second-stage cooling.
Cooling, Units With EconoMi$er — Upon a call for cooling,
when outdoor ambient temperature is above the temperature
control setting, the indoor and outdoor fans and compressor(s)
energize. The economizer damper moves to vent position.
Upon a first-stage call for cooling, when outdoor ambient temperature is below the temperature control setting, the indoor fan
starts and economizer damper modulates to maintain mixed-air
temperature. The compressor(s) remains off.
Upon a second-stage call for cooling, compressor no. 1
(542J180) or loaded compressor (542J150) is energized and
mechanical cooling is integrated with economizer cooling. Compressor no. 2 (542J180) is locked out. If the air temperature is
below 50 F, a cooling lockout switch prevents the compressor(s)
from running.
When supply-air temperature drops below a fixed set point,
the economizer damper modulates to maintain the temperature
at the fixed set point.
A freeze protection thermostat (FPT) is located on the indoor
coil. It detects frost build-up and turns off the compressor(s),
allowing the coil to clear. Once frost has melted, the compressor can be reenergized.
11
CONTROLS (cont)
Heating, Units Without Economizer — With unit main power
on, set thermostat at HEAT position and desired room temperature. Set fan switch at AUTO. (on demand) or ON (continuous)
position.
On a drop in room temperature, heating contactor no. 1 in the
thermostat closes, energizing heat relay (HR), reversing valve
relay (RVR), reversing valve solenoids (RVS1 and RVS2) and
compressor no. 2 contactor. Compressor (542J150) or compressor no. 2 (542J180) and indoor and outdoor fan motors
start. If the 5-minute CTD on the DB is satisfied, then compressor no. 1 contactor is energized and compressor no. 1 will start.
On units equipped with electric heat, when additional heat is
needed, heating contactor no. 2 in the thermostat closes, energizing W2.
Heating, Units With EconoMi$er — With unit main power on,
set thermostat at HEAT position and desired room temperature.
Set fan switch at AUTO. (on demand) or ON (continuous)
position.
On a drop in room temperature, heating contactor no. 1 in the
thermostat closes, energizing heat relay (HR), reversing valve
relay (RVR), reversing valve solenoids (RVS1 and RVS2) and
compressor no. 2 contactor. Compressor no. 2 (542J180) and
indoor and outdoor fan motors start. If the 5-minute CTD on the
DB is satisfied, then compressor (542J150) or compressor no. 1
(542J180) contactor is energized and compressor (542J150) or
compressor no. 1 (542J180) will start. The outdoor-air damper
stays at vent position while the indoor fan is operating.
On units equipped with electric heat, when additional heat is
needed, heating contactor no. 2 in the thermostat closes, energizing W2.
Defrost Cycle — When the temperature of the outdoor coil
drops below 28 F as sensed by the defrost thermostat (DFT1 or
DFT2), the defrost timer starts. At the end of a timed period
(field set at 30, 50, or 90 minutes), the defrost cycle will begin.
The defrost board energizes terminals O and W2, energizes the
defrost relay (DR), deenergizes the reversing valve solenoids
(RVS1 and RVS2), and energizes the electric heat. The outdoorfan motor will stop.
The unit continues to defrost either until the coil temperature as
measured by DFT1 or DFT2 reaches 65 F, or until unit completes a 10-minute defrost cycle.
During the defrost mode, when a circuit defrosts, RVS will oscillate between heating and cooling modes until defrost mode is
complete. This will prevent the head pressure from getting too
high.
At the end of the defrost cycle, the electric heaters (if applicable) will be deenergized, the reversing valve solenoids will be
energized, and the outdoor fans will start.
Automatic Changeover — When the system selection switch
is set at AUTO. position, unit automatically changes from heating operation to cooling operation when the temperature of the
conditioned space rises to the cooling level setting. When the
temperature of the conditioned space falls to the heating level
setting, unit automatically changes from cooling to heating
operation (with a 3 F deadband in between).
Continuous Air Circulation — Turn unit power on. Set system
control at OFF position. Set fan switch at ON position. The
indoor-fan contactor is energized through the thermostat switch
and the indoor fan runs continuously.
Cycle-LOC™ Protection — If unit operation is interrupted by
an open high-pressure switch, low-pressure switch, indoor coil
freezestat, or by compressor internal line-break device (overcurrent or overtemperature), and compressor is calling for either
cooling or heating, Cycle-LOC protection device simultaneously
locks out unit and lights a warning light on the thermostat.
Restart the unit by manually turning thermostat to OFF and
then to ON position. If any of the protective devices opens
again, the unit continues to lock out until corrective action is
taken.
NOTE: If the unit fails to operate due to compressor overcurrent condition, restart by manually resetting circuit breakers
at the unit. Restart cannot be accomplished at the room
thermostat.
Emergency Heat — If compressor is inoperative due to a
tripped safety device (high or low pressure, indoor coil freezestat, overcurrent, or overtemperature), the Cycle-LOC device
locks out the compressor and lights a warning light on the room
thermostat. When the switch is on (thermostat is set to the EM
HT position), compressor circuit and outdoor thermostats are
bypassed, and the second stage of thermostat energizes the
indoor blower and the electric resistance heaters.
12
CONTROLS (cont)
LEGEND
Field Wiring
Field-Supplied Switch
See Legend on page 14.
*Included in power exhaust accessory.
OPERATING MODES
BP — Building Pressurization:
E — Evacuation:
SD — Complete Unit Shutdown:
SP — Smoke Purge:
Indoor fan on, economizer energized to fully open position, power exhaust disabled.
Indoor fan off, economizer energized to fully open position, power exhaust on (open).
Breaks 24-v power to the thermostat.
Indoor fan on, economizer energized to fully open position, power exhaust on.
Typical Smoke Control/Fire Shutdown Wiring — 542J150,180
13
CONTROLS (cont)
LEGEND
AHA
CB
CC
CLO
DAT
DM
EAS
EMC
FU
IFC
Adjustable Heat Anticipator
Circuit Breaker
Cooling Compensator
Compressor Lockout
Discharge Air Thermistor
Damper Motor
Economizer Actuator
Auxiliary Switch
— Economizer Motor Contactor
— Fuse
— Indoor-Fan Contactor
—
—
—
—
—
—
—
IFR
L
LLS
OAT
PL
SR
TB
TC
TH
TRAN
UR
—
—
—
—
—
—
—
—
—
—
—
Indoor-Fan Relay
Light
Liquid Line Solenoid
Outdoor-Air Thermostat
Plug Assembly
Solenoid Relay
Terminal Block
Thermostat Cooling
Thermostat Heating
Transformer
Unloader Relay
Terminal (Marked)
Terminal (Unmarked)
Terminal Block
Splice
Factory Wiring
Field Wiring
Option/Accessory Wiring
To Indicate Common Potential
Only, Not To Represent Wiring
APPLICATION DATA
1. OUTDOOR INSTALLATION — Units approved for outdoor
installation only.
2. DUCTWORK — Secure vertical discharge ductwork to roof
curb. For horizontal discharge applications, either attach
ductwork to unit, or use field-supplied flanges attached to
the horizontal discharge openings and attach all ductwork
to flanges.
3. HORIZONTAL ECONOMI$ER — A field-installed accessory for horizontal discharge applications. Field-installed
power exhaust accessory also available for vertical or horizontal EconoMi$er applications (036-120).
4. THRU-THE-BOTTOM POWER CONNECTIONS — For
applications requiring thru-the-bottom connections, Bryant
accessory thru-the-bottom package must be purchased to
ensure proper connections (036-120).
5. THERMOSTAT — Use of 2-stage heating and cooling thermostat is recommended for all units. A 2-stage cooling thermostat is required on units with accessory economizer to
provide integrated cooling. A two-stage thermostat is
required for all 548F/549B090,120 and 542J150,180 units.
6. HEATING-TO-COOLING — All units are automatic
changeover from heating to cooling when automatic
changeover thermostat and subbase are used.
7. AIRFLOW — Units are draw-thru on cooling and blow-thru
on heating.
8. MAXIMUM AIRFLOW — To minimize the possibility of condensate blow-off from indoor coil, airflow through units
should not exceed 500 cfm/ton.
9. MINIMUM AIRFLOW — For cooling, minimum airflow is
300 cfm/ton. For 548F units with electric heating, the
required minimum cfm is 900 for 548F036; 1200 for
548F048; 1500 for 548F060; 1800 for 548F072; 2250 for
548F090; 2500 for 548F102; and 3000 for 548F120, with
the following exceptions:
UNIT
548F
UNIT
VOLTAGE
HEATER
kW
UNIT
CONFIGURATION
208/230
208/230
42.4
50.0
460
50.0
Horizontal
Horizontal
Horizontal
or
Vertical
Horizontal
or
Vertical
120
17.0
090-120
575
34.0
For 549B and 542J units with electric heating, the required
minimum cfm is 900 for 549B036; 1200 for 549B048; 1500 for
549B060; 1700 for 549B072; 2250 for 549B090; 3000 for
549B120; 3900 for 542J150; and 4500 for 542J180, with the following exceptions:
UNIT
549B
UNIT
VOLTAGE
HEATER
kW
208/230
50.0
460
50.0
120
UNIT
CONFIGURATION
Horizontal
or
Vertical
Horizontal
or
Vertical
REQUIRED
MINIMUM
CFM
3250
3400
10. MINIMUM AMBIENT COOLING OPERATING TEMPERATURE — The minimum temperature for standard units is
25 F (036-120) and 40 F (542J150,180). With accessory
Motormaster® control, units can operate at outdoor temperatures down to –20 F.
11. INTERNAL UNIT DESIGN — Due to Bryant’s internal unit
design (draw-thru over the motor), air path, and specially
designed motors, the full horsepower (maximum continuous
bhp) listed in the Physical Data table and the notes following
each Fan Performance table can be utilized with confidence.
Using Bryant motors with the values listed in the Physical
and Fan Performance Data tables will not result in nuisance
tripping or premature motor failure. The unit warranty will
not be affected.
REQUIRED
MINIMUM
CFM
3200
3200
3200
2800
2350
14
APPLICATION DATA (cont)
6'-2 3/8'' MAX.
5'-9 3/16'' MAX.
1'-10 11/16''
MAX.
5 3/16''
4'-6 13/16''
1'-0 3/16''
1'-7 15/16''
1'-0 3/16''
B
B
24'' MIN.
A
A
BAFFLE
NOTE:
1. Do not drill in this area, damage to basepan may result in
water leak.
2. A 90-degree elbow must be provided in the supply ductwork
to comply with UL (Underwriters’ Laboratories) codes for use
with electric heat.
Shaded area indicates block-off panels.
NOTE: Dimensions A, A′ and B, B′ are obtained from field-supplied
ceiling diffuser.
CAUTION: Concentric ducts may only be installed on units
without electric heat. Personal injury or unit damage may result.
Concentric Duct Distribution —
542J150,180
Concentric Duct Details —
542J150,180
15
TYPICAL PIPING AND WIRING
Vertical Discharge Ducting — 548F036-120 and 549B036-120
LEGEND
NEC — National Electrical Code
Horizontal Discharge Ducting — 548F036-120 and 549B036-120
16
TYPICAL PIPING AND WIRING (cont)
LEGEND
NEC — National Electrical Code
NOTES:
1. Illustration shown is a general guide only and is not intended for or to include all details for any specific installation.
2. Installation must comply with all applicable codes.
3. A 90-degree elbow must be provided in the supply ductwork to comply with UL (Underwriters’ Laboratories) codes for
use with electric heat.
542J150,180
17
50TFQ004-012
548F036-120
MODEL NUMBER NOMENCLATURE — 548F UNITS
(ODS Model Number)
548F
E
X
090
000
548F – Single-Package
Heat Pump
Unit
AA
Factory-Installed Options*
Voltage Designation
E – 460-3-60
J – 208/230-1-60†
P – 208/230-3-60
T – 575-3-60
X – No Heat Installed.
(Field-installed electric heaters available.)
Nominal Tons
036 – 3
090 – 7-1/2
048 – 4
102 – 8-1/2
060 – 5
120 – 10
072 – 6
ODS
—
Electric Heaters
000 – No factory-installed electric heaters
LEGEND
Order Distribution System
*Refer to Trade Price Sheets or contact your local representative for specific
information regarding which options are available on which units.
†Single-phase is only available on 036-060 size units.
NOTE: The example model number 548FEX090000AA designates a 71/2 ton
460-3-60 volt electric heat pump unit with factory-installed economizer.
ARI* CAPACITY RATINGS
548F036-060
HEATING
(High Temp)
COOLING
UNIT
548F
NOMINAL
TONS
Capacity
(Btuh)
3
4
5
036
048
060
35,600
46,500
57,000
SEER†
Belt
Drive
10.20
10.00
10.00
Direct
Drive
10.00
9.70
9.90
Capacity
(Btuh)
HSPF
SOUND
RATING
(decibels)
34,400
46,500
57,000
6.7
7.0
7.5
84
80
82
548F072-120
UNIT
548F
NOMINAL
TONS
072††
090††
102††
120††
6
71/2
81/2
10
COP
db
EER
HSPF
IPLV
SEER
wb
—
—
—
—
—
—
—
COOLING
Capacity
(Btuh)
70,000
86,000
96,000
112,000
EER
9.05
9.00
8.90
9.00
HEATING
(High)
Capacity
(Btuh)
72,400
78,000
96,000
105,000
COP
3.20
3.00
3.00
3.10
HEATING
(Low)
Capacity
(Btuh)
42,000
39,000
55,000
59,000
IPLV**
SOUND
RATING
(decibels)
—
9.3
8.85
9.0
82
86
86
84
COP
2.14
1.80
2.00
2.00
3. Ratings are based on:
LEGEND
Coefficient of Performance
dry bulb
Energy Efficiency Ratio
Heating Seasonal Performance Factor
Integrated Part-Load Values
Seasonal Energy Efficiency Ratio
wet bulb
Cooling Standard: 80 F db, 67 F wb indoor entering-air temperature and 95 F db
air entering outdoor unit.
IPLV Standard: 80 F db, 67 F wb indoor entering-air temperature and 80 F db outdoor entering-air temperature.
High-Temp Heating Standard: 70 F db indoor entering-air temperature and 47 F
db, 43 F wb outdoor entering-air temperature.
Low-Temp Heating Standard: 70 F db indoor entering-air temperature and 17 F
db, 15 F wb outdoor entering-air temperature.
*Air Conditioning and Refrigeration Institute.
†Applies only to units with capacity of 60,000 Btuh or less.
**The IPLV applies only to 2-stage heat pump units.
††Not ASHRAE 90.1-99 compliant.
NOTES:
1. Rated in accordance with ARI Standards 210/240-95 and 270-95.
2. Ratings are net values, reflecting the effects of circulating fan heat.
18
PHYSICAL DATA
UNIT SIZE 548F
NOMINAL CAPACITY (tons)
OPERATING WEIGHT (lb)
Unit
Economizer
Durablade
EconoMi$er
Roof Curb*
COMPRESSOR
Quantity
Oil (oz)
REFRIGERANT TYPE
Operating Charge (lb-oz)
Circuit 1
Circuit 2
Nominal Cfm
Maximum Continuous Bhp
Motor Frame Size
Nominal Rpm High/Low
Fan Rpm Range
Motor Bearing Type
Maximum Allowable Rpm
Motor Pulley Pitch Diameter Min/Max (in.)
Nominal Motor Shaft Diameter (in.)
Fan Pulley Pitch Diameter (in.)
Belt, Quantity...Type...Length (in.)
Pulley Center Line Distance (in.)
Speed Change per Full Turn of
Movable Pulley Flange (rpm)
Movable Pulley Maximum Full Turns
From Closed Position
Factory Setting
Factory Speed Setting (rpm)
060
5
072
6
500
520
550
590
34
47
115
34
47
115
34
47
115
34
47
115
1
45
1
54
1
50
1
54
R-22
5-1
—
6-0
8-0
11-2
—
—
—
Enhanced Copper Tubes, Aluminum Lanced Fins, Fixed Orifice Metering Device
1...17
1...17
2...17
2...17
10.31
14.58
12.25
16.53
Propeller Type
4000
4000
4000
4000
1...22.0
1...22.0
1...22.0
1...22.0
1/4...1100
1/4...1100
1/4...1100
1/4...1100
325
325
325
325
Enhanced Copper Tubes, Aluminum Double-Wavy Fins, Fixed Orifice Metering Device
2...15
2...15
3...15
3...15
4.2
4.2
5.5
5.5
OUTDOOR FAN
Nominal Cfm
Quantity...Diameter (in.)
Motor Hp...Rpm
Watts Input (Total)
INDOOR COIL
Rows...Fins/in.
Total Face Area (sq ft)
Type Drive
048
4
Hermetic
OUTDOOR COIL
Rows...Fins/in.
Total Face Area (sq ft)
INDOOR FAN
Quantity...Size (in.)
036
3
Centrifugal Type
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Fan Shaft Diameter at Pulley (in.)
1...10 x 10
1...10 x 10
1...10 x 10
Direct
Belt
Belt
1200
.34
1.00
2.40
48
48
56
860/800
1620
1725
—
760-1000
1075-1455
Ball
2100
—
1.9/2.9
2.8/3.8
1/2
1/2
5/8
—
4.5
4.5
—
1...A...34
1...A...39
—
10.0-12.4
10.0-12.4
—
48
65
—
5
6
—
3
31/2
—
856
1233
5/8
1...10 x 10
1...10 x 10
1...10 x 10
Direct
Belt
Belt
1600
.75
1.00
2.40
48
48
56
1075/970
1620
1725
—
835-1185
1075-1455
Ball
2100
—
1.9/2.9
2.8/3.8
1/2
1/2
5/8
—
4.0
4.5
—
1...A...34
1...A...39
—
10.0-12.4
10.0-12.4
—
70
65
—
5
6
—
3
31/2
—
975
1233
5/8
1...11 x 10
1...10 x 10
1...10 x 10
Direct
Belt
Belt
2000
1.20
1.30/2.40†
2.90
48
56
56
1075/970
1725
1725
—
900-1300
1300-1685
Ball
2100
—
2.4/3.4
3.4/4.4
1/2
5/8
5/8
—
4.5
4.5
—
1...A...39
1...A...40
—
14.7-15.5
14.7-15.5
—
80
60
—
5
5
—
3
31/2
—
1060
1396
5/8
HIGH-PRESSURE SWITCH (psig)
Standard Compressor Internal Relief (Differential)
Cutout
Reset (Auto.)
LOSS-OF-CHARGE SWITCH (psig)
Cutout
Reset (Auto.)
FREEZE-PROTECTION THERMOSTAT (F)
Opens
Closes
OUTDOOR-AIR INLET SCREENS
Quantity...Size (in.)
30 ± 5
45 ± 5
Cleanable
1...20 x 24 x 1
RETURN-AIR FILTERS
Quantity...Size (in.)
Throwaway
2...16 x 25 x 2
450 ± 50
428
320
7±3
22 ± 7
LEGEND
Bhp — Brake Horsepower
*Weight of 14-in. roof curb.
†Single phase/three phase.
NOTE: The 548F units have a loss-of-charge switch located in the liquid line.
19
1...10 x 10
—
1...10 x 10
Belt
—
Belt
2400
2.40
—
2.90
56
—
56
—
—
1725
1070-1460
—
1300-1685
Ball
2100
2.8/3.8
—
3.4/4.4
5/8
—
5/8
4.5
—
4.5
1...A...40
—
1...A...40
14.7-15.5
—
14.7-15.5
80
—
60
5
—
5
3
—
31/2
1225
—
1396
5/8
50TFQ004-012
548F036-120
548F036-072
50TFQ004-012
548F036-120
PHYSICAL DATA (cont)
548F090-120
UNIT SIZE 548F
NOMINAL CAPACITY (tons)
OPERATING WEIGHT (lb)
Unit
Economizer
Durablade
EconoMi$er
Roof Curb*
COMPRESSOR
Quantity
Oil (oz)
REFRIGERANT TYPE
Operating Charge (lb-oz)
Circuit 1
Circuit 2
Nominal Cfm
Maximum Continuous Bhp
Motor Frame Size
Nominal Rpm High/Low
Fan Rpm Range
Motor Bearing Type
Maximum Allowable Rpm
Motor Pulley Pitch Diameter Min/Max (in.)
Nominal Motor Shaft Diameter (in.)
Fan Pulley Pitch Diameter (in.)
Belt, Quantity...Type...Length (in.)
Pulley Center Line Distance (in.)
Speed Change per Full Turn of
Movable Pulley Flange (rpm)
Movable Pulley Maximum Full Turns
From Closed Position
Factory Setting
Factory Speed Setting (rpm)
120
10
940
965
1015
44
62
143
44
62
143
Hermetic
2
54 ea
R-22
44
62
143
2
54 ea
5-14
8- 6
7-14
5-13
8-13
8- 3
Enhanced Copper Tubes, Aluminum Lanced Fins Fixed Orifice Metering Device
1...17
2...17
2...17
20.50
18.00
18.30
Propeller Type
6500
6500
6500
2...22
2...22
2...22
1/ ...1100
1/ ...1100
1/ ...1100
4
4
4
500
500
500
Enhanced Copper Tubes, Aluminum Double-Wavy Fins, Fixed Orifice Metering Device
3...15
3...15
3...15
8.0
8.0
11.1
INDOOR COIL
Rows...Fins/in.
Total Face Area (sq ft)
Type Drive
102
8 1 /2
2
45 ea
OUTDOOR COIL
Rows...Fins/in.
Total Face Area (sq ft)
OUTDOOR FAN
Nominal Cfm
Quantity...Diameter (in.)
Motor Hp...Rpm
Watts Input (Total)
INDOOR FAN
Quantity...Size (in.)
090
71/2
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
1...15 x 15
1...15 x 15
1...15 x 15
Belt
Belt
Belt
3000
2.40
2.40
3.70
56
56
56
—
—
1725
590- 840
685- 935
860-1080
Ball
2100
2.4/3.4
2.8/3.8
4.0/5.0
5/8
5/8
7/8
7.0
7.0
8.0
1...A...49
1...A...49
1...A...55
16.75-19.25
15.75-19.25
15.75-19.25
Centrifugal Type
1...15 x 15
—
1...15 x 15
Belt
—
Belt
3600
2.40
—
3.70
56
—
56
—
—
1725
685- 935
—
860-1080
Ball
2100
2.8/3.8
—
4.0/5.0
5 /8
—
7 /8
7.0
—
8.0
1...A...49
—
1...A...55
16.75-19.25
—
16.75-19.25
1...15 x 15
1...15 x 15
1...15 x 15
Belt
Belt
Belt
4000
2.40
2.90
5.25
56
56
56
—
—
1725
685- 935
835-1085
830-1130
Ball
2100
2.8/3.8
3.4/4.4
2.8/3.8
5/8
7/8
7/8
7.0
7.0
5.8
1...A...49
1...A...49
1...BX...46
15.85-17.50
15.85-17.50
15.85-17.50
Std
Alt
High-Static
50
50
60
50
—
60
50
50
60
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
5
5
5
5
5
5
590
685
860
1
5
—
5
5
—
5
685
—
860
1
5
5
6
5
5
5
685
835
887
1
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Std
Alt
High-Static
Fan Shaft Diameter at Pulley (in.)
HIGH-PRESSURE SWITCH (psig)
Standard Compressor Internal Relief (Differential)
Cutout
Reset (Auto.)
LOSS-OF-CHARGE SWITCH (psig)
Cutout
Reset (Auto.)
FREEZE-PROTECTION THERMOSTAT (F)
Opens
Closes
OUTDOOR-AIR INLET SCREENS
Quantity...Size (in.)
RETURN-AIR FILTERS
Quantity...Size (in.)
450 ± 50
428
320
7±3
22 ± 5
30 ± 5
45 ± 5
Cleanable
1...20 x 25 x 1
1...16 x 25 x 1
4...16 x 20 x 2
LEGEND
Bhp — Brake Horsepower
*Weight of 14-in. roof curb.
NOTE: The 548F units have a loss-of-charge switch located in the liquid line.
20
Throwaway
4...16 x 20 x 2
4...20 x 20 x 2
50TFQ004-012
548F036-120
548F036-072
BASE UNIT DIMENSIONS
21
548F090-120
50TFQ004-012
548F036-120
BASE UNIT DIMENSIONS (cont)
22
ACCESSORY DIMENSIONS
CRBTMPWR003A00
B
1′-911/
C
16″
[551]
1′-4″
[406]
D ALT
DRAIN HOLE
13/4″
[44.5]
CRBTMPWR004A00
GAS
POWER
CONTROL
3/ ″
4
3/ ″ [19] NPT
4
11/4″ [31.7]
1/ ″
2
[19] NPT
1/ ″
2
[12.7] NPT
3/ ″
4
[19] NPT
3/ ″
4
CRRFCURB001A00
[12.7]
[19] NPT
11/4″ [31.7]
ROOF CURB
ACCESSORY
CRRFCURB002A00
1/ ″
2
[12.7]
A
UNIT SIZE
1′-2″
[356]
2′-0″
[610]
548F036-072
NOTES:
1. Roof curb accessory is shipped disassembled.
2. Insulated panels.
3. Dimensions in [ ] are in millimeters.
4. Roof curb: galvanized steel.
5. Attach ductwork to curb (flanges of duct rest on curb).
6. Service clearance: 4 ft on each side.
7.
Direction of airflow.
8. Connector packages CRBTMPWR001A00 and
002A00 are for thru-the-curb type gas. Packages
CRBTMPWR003A00 and 004A00 are for thru-thebottom type gas connections.
TO ENSURE AIRTIGHT CONNECTION.
PLACE UNIT AS CLOSE TO THIS
END AS POSSIBLE
TO ENSURE AIRTIGHT CONNECTION.
PLACE UNIT AS CLOSE TO THIS
END AS POSSIBLE
548F036-072
23
50TFQ004-012
548F036-120
CONNECTOR
PKG. ACCY.
CRBTMPWR001A00
CRBTMPWR002A00
50TFQ004-012
548F036-120
ACCESSORY DIMENSIONS (cont)
CONNECTOR
PKG. ACCY.
B
CRBTMPWR001A00
CRBTMPWR002A00
CRBTMPWR003A00
2′-87/16″
[827]
C
1′-1015/16″
[583]
CRBTMPWR004A00
D ALT
DRAIN
HOLE
GAS
POWER
CONTROL
3/ ″ [19] NPT
4
11/4″ [31.7]
1/2″
[12.7] NPT
13/4″
[44.5]
3/4″
[19] NPT
1/ ″
2
[12.7] NPT
3/4″
[19] NPT
3/ ″
4
[19] NPT
11/4″ [31.7]
1/ ″
2
[12.7] NPT
ROOF CURB
“A”
UNIT SIZE
ACCESSORY
CRRFCURB003A00 1′-2″ [356]
548F090-120
CRRFCURB004A00 2′-0″ [610]
NOTES:
1. Roof curb accessory is shipped disassembled.
2. Insulated panels: 1-in. thick polyurethane foam,
13/4 lb density.
3. Dimensions in [ ] are in millimeters.
4. Roof curb: 16-gage steel.
5. Attach ductwork to curb (flanges of duct rest on
curb).
6. Service clearance 4 ft on each side.
7.
Direction of airflow.
8. Connector packages CRBTMPWR001A00 and
2A00 are for thru-the-curb gas type. Packages
CRBTMPWR003A00 and 4A00 are for thruthe-bottom type gas connections.
TO ENSURE AN AIRTIGHT CONNECTION,
PLACE UNIT ON CURB AS CLOSE TO
DUCT END AS POSSIBLE.
TO ENSURE AN AIRTIGHT CONNECTION,
PLACE UNIT ON CURB AS CLOSE TO
DUCT END AS POSSIBLE.
548F090-120
24
SELECTION PROCEDURE (WITH 548F048 EXAMPLE)
17,000 Btuh
3413 Btuh/kW
External static pressure
Durablade economizer
Electric heat
Total static pressure
.45 in. wg
.05 in. wg
.09 in. wg
.59 in. wg
Enter the Fan Performance table for 548F048 vertical discharge. At 1600 cfm and 230-v high speed, the standard
motor will deliver 0.76 in. wg static pressure, 723 watts,
and 0.64 brake horsepower (bhp). This will adequately
handle job requirements.
V DETERMINE NET CAPACITIES.
Capacities are gross and do not include the effect of
indoor-fan motor (IFM) heat.
Determine net cooling capacity as follows:
Net capacity = Total capacity – IFM heat
= 49,900 Btuh – (723 Watts x 3.413
Btuh/Watts)
= 49,900 Btuh – 2468 Btuh
= 47,432
Net sensible capacity = 33,900 Btuh – 2468 Btuh
= 31,432 Btuh
Integrated heating capacity is maximum (instantaneous)
capacity less the effect of frost on the outdoor coil and the
heat required to defrost it. Therefore, net capacity is equal
to 38,410 Btuh, the total heating capacity determined in
Step III.
= 5.0 kW of heat required.
25
50TFQ004-012
548F036-120
Enter the Electric Heating Capacities table (page 54) for
548F048 at 208/230, 3 phase. The 6.5-kW heater at
240 v most closely satisfies the heating required. To calculate kW at 230 v, use the Multiplication Factors table.
6.5 kW x .92 = 5.98 kW
6.5 kW x .92 x 3413 = 20,410 Btuh
Total unit heating capacity is 38,410 Btuh (18,000 +
20,410).
IV DETERMINE FAN SPEED AND POWER REQUIREMENTS AT DESIGN CONDITIONS.
Before entering Fan Performance tables, calculate the
total static pressure required based on unit components.
From the given and the Pressure Drop tables, find:
I DETERMINE COOLING AND HEATING LOADS AT
DESIGN CONDITIONS.
Given:
Required Cooling Capacity (TC) . . . . . . . . . . 38,000 Btuh
Sensible Heat Capacity (SHC). . . . . . . . . . . . 24,000 Btuh
Required Heating Capacity . . . . . . . . . . . . . . 35,000 Btuh
Outdoor Entering-Air Temperature db . . . . . . . . . . . . 95 F
Outdoor-Air Winter Design Temperature . . . . . . . . . . .0° F
Indoor-Air Winter Design Temperature . . . . . . . . . . . 70 F
Indoor-Air
Temperature . . . . . . . . . 80 F edb (entering air, dry bulb)
67 F ewb (entering air, wet bulb)
Indoor-Air Quantity. . . . . . . . . . . . . . . . . . . . . . . .1600 cfm
External Static Pressure . . . . . . . . . . . . . . . . . 0.45 in. wg
Electrical Characteristics (V-Ph-Hz). . . . . . . . . . . 230-3-60
II SELECT UNIT BASED ON REQUIRED COOLING
CAPACITY.
Enter Cooling Capacities table at outdoor entering temperature of 95 F, indoor air entering at 1600 cfm and
67 F ewb. The 548F048 unit will provide a total cooling
capacity of 49,900 Btuh and a sensible heat capacity of
33,900 Btuh.
For indoor-air temperature other than 80 F edb, calculate
sensible heat capacity correction, as required, using the
formula found in Note 3 following the cooling capacities
tables.
NOTE: Unit ratings are gross capacities and do not
include the effect of indoor-fan motor heat. To calculate net
capacities, see Step V.
III SELECT ELECTRIC HEAT.
Enter the Instantaneous and Integrated Heating Ratings
table at 1600 cfm. At 70 F return indoor air and 0° F air
entering outdoor coil, the integrated heating capacity is
18,000 Btuh. (Select integrated heating capacity value
since deductions for outdoor-coil frost and defrosting have
already been made. No correction is required.)
The required heating capacity is 35,000 Btuh. Therefore,
17,000 Btuh (35,000 – 18,000) additional electric heat is
required.
Determine additional electric heat capacity in kW.
50TFQ004-012
548F036-120
PERFORMANCE DATA
COOLING CAPACITIES
548F036 (3 TONS)
Temp (F)
Outdoor
Entering Air
(Edb)
75
85
95
105
115
125
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
900/0.10
72
42.4
16.7
2.77
41.5
16.6
3.01
40.0
16.2
3.24
38.4
15.7
3.47
36.1
15.1
3.66
34.2
14.6
3.88
67
39.9
22.0
2.71
38.4
21.6
2.92
36.3
20.9
3.10
34.7
20.5
3.32
32.5
19.8
3.50
30.5
19.2
3.68
Indoor Entering Air — Cfm/BF
1200/0.15
1500/0.21
Indoor Entering Air — Ewb (F)
62
72
67
62
72
67
62
36.5
43.0
41.2
38.7
45.1
42.8
40.3
26.8
17.5
24.2
30.9
19.3
26.9
34.1
2.62
2.78
2.74
2.68
2.85
2.79
2.73
34.8
43.3
40.4
37.0
44.0
41.7
38.7
26.2
18.2
24.6
30.3
19.3
27.2
33.7
2.80
3.07
2.98
2.88
3.09
3.03
2.94
33.0
42.3
38.5
35.2
43.4
40.0
36.7
25.7
18.2
24.2
29.8
19.7
27.2
32.7
2.99
3.32
3.19
3.07
3.36
3.24
3.13
31.0
40.0
36.7
33.1
41.2
37.7
35.2
24.8
17.5
23.9
28.8
19.3
26.6
31.7
3.16
3.53
3.41
3.26
3.58
3.44
3.35
28.9
38.1
34.3
31.1
39.3
35.5
33.2
23.9
17.2
23.2
27.8
19.1
26.2
30.2
3.32
3.76
3.59
3.44
3.81
3.65
3.54
26.8
35.9
32.0
29.3
36.8
33.0
31.3
22.9
16.7
22.6
26.3
18.5
25.5
28.4
3.49
3.97
3.77
3.62
4.02
3.83
3.74
548F048 (4 TONS)
Temp (F)
Outdoor
Entering Air
(Edb)
75
85
95
105
115
125
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
1200/0.11
72
55.5
24.5
3.80
53.4
23.8
4.10
52.0
23.4
4.47
49.3
22.5
4.77
46.6
21.7
5.08
44.0
20.9
5.45
67
51.9
31.2
3.70
49.7
30.4
3.99
47.4
29.6
4.28
45.0
28.8
4.59
42.4
27.9
4.90
39.6
26.9
5.21
Indoor Entering Air — Cfm/BF
1600/0.15
2000/0.22
Indoor Entering Air — Ewb (F)
62
72
67
62
72
67
62
47.4
56.9
54.6
50.3
59.3
56.5
52.1
37.4
26.0
35.2
43.4
28.4
39.0
47.6
3.55
3.84
3.79
3.66
3.93
3.86
3.71
45.3
56.3
52.6
47.8
57.5
54.1
49.8
36.7
26.3
34.9
42.6
28.3
38.6
46.9
3.84
4.23
4.11
3.94
4.27
4.16
4.01
43.0
53.7
49.9
45.5
54.5
51.6
47.4
35.8
25.5
33.9
41.6
27.3
38.2
45.2
4.11
4.53
4.39
4.23
4.56
4.48
4.29
40.6
51.8
47.2
43.0
52.6
48.7
45.4
34.7
25.3
33.0
40.3
27.1
37.1
43.3
4.39
4.90
4.68
4.52
4.92
4.76
4.63
38.0
48.8
44.6
40.6
50.2
45.8
43.2
33.6
24.3
32.4
38.7
26.8
36.1
41.2
4.66
5.21
5.01
4.81
5.29
5.06
4.96
35.4
45.6
41.6
38.3
47.0
42.9
40.9
32.4
23.3
31.6
36.5
25.9
35.6
39.0
4.96
5.51
5.34
5.14
5.60
5.41
5.30
548F060 (5 TONS)
Temp (F)
Outdoor
Entering Air
(Edb)
75
85
95
105
115
125
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
1500/0.05
72
69.3
30.9
4.28
67.7
30.4
4.76
65.2
29.6
5.27
62.3
28.6
5.79
59.7
27.6
6.37
56.5
26.8
7.03
67
64.5
39.2
4.15
62.4
38.6
4.61
59.8
37.6
5.10
57.2
33.8
5.66
54.2
35.8
6.24
51.0
34.7
6.87
Indoor Entering Air — Cfm/BF
2000/0.08
2500/0.14
Indoor Entering Air — Ewb (F)
62
72
67
62
72
67
62
59.3
70.8
67.9
62.8
72.9
69.3
65.4
47.4
33.1
44.9
55.4
35.8
49.4
61.4
4.03
4.32
4.25
4.12
4.38
4.29
4.19
56.8
69.1
65.7
60.2
71.1
67.7
63.2
46.5
32.8
44.6
54.4
35.8
50.0
59.8
4.49
4.79
4.72
4.56
4.86
4.78
4.65
54.4
67.7
62.9
57.6
69.1
64.8
60.7
45.5
32.8
43.6
53.2
35.6
49.3
57.7
4.97
5.35
5.20
5.07
5.39
5.27
5.14
51.8
65.1
59.6
54.9
66.8
61.7
58.3
44.4
32.1
42.6
51.6
35.4
48.2
55.5
5.50
5.90
5.73
5.61
5.97
5.79
5.68
49.0
61.7
57.0
52.5
63.2
58.4
55.8
43.2
31.1
41.9
49.6
34.3
47.0
53.2
6.06
6.47
6.34
6.20
6.53
6.36
6.31
46.0
58.2
53.5
49.8
59.4
55.1
53.0
41.9
30.0
40.8
47.3
33.0
46.5
50.5
6.65
7.07
6.96
6.82
7.13
7.03
6.96
26
BF
Edb
Ewb
kW
Ldb
Lwb
SHC
TC
LEGEND
Bypass Factor
Entering Dry-Bulb
Entering Wet-Bulb
Compressor Motor Power Input
Leaving Dry-Bulb
Leaving Wet-Bulb
Sensible Heat Capacity
(1000 Btuh) Gross
— Total Capacity (1000 Btuh) Gross
—
—
—
—
—
—
—
NOTES:
1. Direct interpolation is permissible. Do not
extrapolate.
2. The following formulas may be used:
tldb = tedb –
sensible capacity (Btuh)
1.10 x cfm
tlwb = Wet-bulb temperature corresponding
to enthalpy of air leaving indoor coil
(hlwb)
hlwb = hewb –
total capacity (Btuh)
4.5 x cfm
Where: hewb = Enthalpy of air entering evaporator coil
3. The SHC is based on 80 F edb temperature
of air entering indoor coil.
Below 80 F edb, subtract (corr factor x cfm)
from SHC.
Above 80 F edb, add (corr factor x cfm) to
SHC.
BYPASS 79
FACTOR
(BF)
81
.05
.10
.20
.30
1.04
.98
.87
.76
ENTERING AIR
DRY-BULB TEMP (F)
under
78 77 76 75
75
82 83 84 85 over
85
Correction Factor
2.07 3.11 4.14 5.18 Use
1.96 2.94 3.92 4.90 formula
1.74 2.62 3.49 4.36 shown
1.53 2.29 3.05 3.82 below.
Interpolation is permissible.
Correction Factor = 1.10 x (1 – BF) x
(edb – 80).
PERFORMANCE DATA (cont)
548F072 (6 TONS)
Temp (F)
Outdoor
Entering Air
(Edb)
75
85
95
105
115
125
1800/0.10
72
81.1
36.2
5.16
80.7
36.1
5.83
79.3
35.8
6.54
76.0
34.6
7.21
72.7
33.6
7.95
70.1
32.9
8.82
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
67
77.6
46.9
5.11
75.8
46.5
5.74
73.0
45.4
6.37
70.6
44.8
7.12
67.5
43.7
7.86
63.9
42.4
8.62
Indoor Entering Air — Cfm/BF
2400/0.13
3000/0.19
Indoor Entering Air — Ewb (F)
62
72
67
62
72
67
62
72.1
84.0
80.3
75.2
84.2
81.1
77.8
57.0
39.1
52.4
65.4
40.8
56.2
72.2
5.01
5.23
5.16
5.06
5.23
5.17
5.11
70.0
83.9
79.3
73.4
84.1
80.8
76.2
56.4
39.7
52.9
65.2
41.6
58.3
71.9
5.65
5.90
5.81
5.69
5.90
5.84
5.76
67.3
82.0
76.7
70.8
83.0
79.1
73.5
55.3
39.3
52.3
64.3
42.2
58.9
69.7
6.28
6.60
6.47
6.37
6.62
6.55
6.40
64.3
79.6
73.4
67.9
80.7
75.5
71.3
54.1
38.8
51.2
62.9
42.0
57.6
67.8
6.94
7.34
7.15
7.06
7.36
7.22
7.14
61.1
75.8
70.6
64.7
77.9
71.8
68.5
52.7
37.6
50.7
60.9
41.5
56.4
65.2
7.63
8.06
7.95
7.77
8.14
7.94
7.90
57.6
71.8
66.9
61.6
73.5
68.6
65.4
51.2
36.4
49.5
58.4
40.2
56.1
62.3
8.37
8.83
8.73
8.54
8.89
8.79
8.69
548F090 (71/2 TONS)
Temp (F)
Outdoor
Entering Air
(Edb)
75
85
95
105
115
125
2250/0.04
72
67
62
109.8 101.4 92.2
TC
44.2 57.4 69.4
SHC
6.66 6.44 6.18
kW
105.2 96.4 87.0
TC
42.8 55.6 67.6
SHC
7.20 6.94 6.64
kW
100.6 91.0 82.0
TC
41.6 54.0 65.8
SHC
7.78 7.42 7.08
kW
94.8 85.4 76.8
TC
SHC 40.0 52.2 63.8
8.26 7.88 7.50
kW
88.8 79.9 71.4
TC
SHC 38.4 50.4 61.6
8.76 8.32 7.90
kW
82.6 73.8 65.8
TC
SHC 36.8 48.6 59.2
9.20 8.74 8.30
kW
Indoor Entering Air — Cfm/BF
3000/0.06
3200/0.08
Indoor Entering Air — Ewb (F)
72
67
62
72
67
62
116.2 107.0 98.0 117.6 108.8 100.2
49.6 66.0 82.0 51.8 69.8 87.0
6.86 6.60 6.36 6.92 6.66 6.42
111.4 102.2 92.6 113.0 104.0 95.0
48.4 65.0 80.0 50.8 69.0 84.4
7.42 7.14 6.82 7.48 7.20 6.90
105.6 96.2 87.4 107.2 98.0 89.8
47.0 63.2 77.8 49.4 67.4 81.4
7.96 7.62 7.30 8.00 7.70 7.40
99.8 90.2 82.2 101.4 91.6 85.0
45.6 61.6 74.6 48.2 65.8 77.6
8.48 8.10 7.76 8.56 8.18 7.88
93.4 84.0 77.6 94.8 85.4 80.0
44.2 59.8 70.6 46.6 64.0 73.2
8.98 8.54 8.22 9.04 8.62 8.36
86.6 77.4 74.4 88.0 78.8 75.0
42.2 57.8 66.2 45.2 62.0 68.6
9.44 8.96 8.68 9.52 9.02 8.82
3750/0.11
72
118.8
54.0
6.94
114.6
53.4
7.54
108.6
52.0
8.06
103.2
51.2
8.64
96.0
49.4
9.10
89.2
48.2
9.60
67
62
110.4 102.4
74.0 92.0
6.70 6.48
105.8 97.6
73.8 88.8
7.28 7.00
99.6 92.8
72.2 84.6
7.76 7.50
93.2 88.0
70.4 80.4
8.24 8.02
86.6 83.0
68.6 75.8
8.70 8.50
80.0 77.6
66.6 71.0
9.12 8.98
548F102 (81/2 TONS)
Temp (F)
Outdoor
Entering Air
(Edb)
75
85
95
105
115
125
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
2400/0.06
72
111.4
51.8
8.64
108.8
50.9
9.27
104.5
49.3
9.90
98.8
47.1
10.37
93.8
45.3
10.99
88.4
43.4
11.52
67
102.3
64.3
8.48
97.4
62.3
9.09
92.7
60.2
9.56
87.8
58.3
10.08
82.4
56.0
10.56
77.2
54.1
11.03
62
91.0
75.3
8.23
86.1
73.2
8.76
81.2
70.9
9.22
75.9
68.1
9.70
71.1
65.9
10.13
66.7
63.1
10.56
Indoor Entering Air — Cfm/BF
3200/0.09
3600/0.11
Indoor Entering Air — Ewb (F)
72
67
62
72
67
62
115.7 108.2 97.6 117.0 110.1 100.4
54.9 71.9 87.6 55.8 74.9 92.5
9.32 9.18 8.95 9.73 9.61 9.30
113.7 104.2 92.9 115.2 106.6 94.8
54.7 70.9 85.1 55.7 74.3 89.3
9.98 9.79 9.40 10.40 10.24 9.83
110.4 98.8 87.7 112.0 101.3 90.8
53.7 68.7 82.4 55.1 72.6 86.3
10.64 10.39 9.88 11.07 10.86 10.25
105.5 93.4 83.0 107.4 95.4 86.5
52.2 66.5 79.0 53.7 69.9 82.2
11.26 10.90 10.33 11.71 11.34 10.73
98.7 87.9 78.6 100.8 89.8 82.1
49.5 64.5 75.5 51.3 68.0 77.9
11.72 11.39 10.79 12.16 11.86 11.24
93.1 82.2 74.5 94.9 83.9 77.9
47.7 62.3 71.4 49.2 65.8 73.7
12.33 11.87 11.30 12.78 12.33 11.75
27
4000/0.14
72
118.1
56.7
10.19
116.6
56.7
10.88
113.2
56.2
11.55
108.9
55.1
12.20
102.9
53.0
12.76
96.2
50.4
13.29
67
111.6
77.1
10.12
108.3
77.2
10.74
103.1
75.7
11.36
97.1
72.9
11.82
91.3
71.0
12.38
85.3
68.8
12.81
62
102.5
96.4
9.72
98.0
92.2
10.20
93.8
88.2
10.67
89.5
83.9
11.24
85.3
79.6
11.76
80.8
75.2
12.27
BF
Edb
Ewb
kW
Ldb
Lwb
SHC
TC
LEGEND
Bypass Factor
Entering Dry-Bulb
Entering Wet-Bulb
Compressor Motor Power Input
Leaving Dry-Bulb
Leaving Wet-Bulb
Sensible Heat Capacity
(1000 Btuh) Gross
— Total Capacity (1000 Btuh) Gross
—
—
—
—
—
—
—
NOTES:
1. Direct interpolation is permissible. Do not
extrapolate.
2. The following formulas may be used:
tldb = tedb –
sensible capacity (Btuh)
1.10 x cfm
tlwb = Wet-bulb temperature corresponding
to enthalpy of air leaving indoor coil
(hlwb)
hlwb = hewb –
total capacity (Btuh)
4.5 x cfm
Where: hewb = Enthalpy of air entering evaporator coil
3. The SHC is based on 80 F edb temperature
of air entering indoor coil.
Below 80 F edb, subtract (corr factor x cfm)
from SHC.
Above 80 F edb, add (corr factor x cfm) to
SHC.
BYPASS 79
FACTOR
(BF)
81
.05
.10
.20
.30
1.04
.98
.87
.76
ENTERING AIR
DRY-BULB TEMP (F)
under
78 77 76 75
75
82 83 84 85 over
85
Correction Factor
2.07 3.11 4.14 5.18 Use
1.96 2.94 3.92 4.90 formula
1.74 2.62 3.49 4.36 shown
1.53 2.29 3.05 3.82 below.
Interpolation is permissible.
Correction Factor = 1.10 x (1 – BF) x
(edb – 80).
50TFQ004-012
548F036-120
COOLING CAPACITIES (cont)
50TFQ004-012
548F036-120
PERFORMANCE DATA (cont)
COOLING CAPACITIES (cont)
548F120 (10 TONS)
Temp (F)
Outdoor
Entering Air
(Edb)
75
85
95
105
115
125
BF
Edb
Ewb
kW
Ldb
Lwb
SHC
TC
—
—
—
—
—
—
—
—
2800/0.11
72
127.4
60.0
8.30
124.6
59.2
9.24
121.8
58.4
10.34
116.9
56.6
11.38
112.0
55.0
12.58
106.4
53.2
13.84
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
67
120.4
76.4
8.18
116.2
74.6
9.04
112.0
73.2
10.04
107.2
71.4
11.08
102.0
69.6
12.18
96.8
67.4
13.36
62
110.6
91.0
7.88
106.4
89.4
8.74
102.2
87.4
9.66
97.6
85.4
10.66
92.8
83.2
11.74
87.8
80.8
12.90
72
134.2
66.2
8.54
131.0
65.4
9.50
126.2
63.8
10.46
122.4
63.0
11.64
116.6
61.2
12.78
110.4
59.2
13.96
Indoor Entering Air — Cfm/BF
3750/0.16
4100/0.18
Indoor Entering Air — Ewb (F)
67
62
72
67
126.2
116.2
135.6
127.4
86.0
104.4
67.8
89.0
8.34
8.04
8.60
8.36
122.0
112.4
132.4
123.6
84.8
103.6
67.4
88.4
9.24
8.98
9.54
9.28
117.4
107.4
127.8
119.0
83.4
101.0
66.0
87.2
10.18
9.90
10.52
10.26
112.4
102.8
123.6
113.8
82.0
98.4
65.0
85.8
11.28
10.90
11.68
11.32
107.0
98.0
118.0
108.2
80.2
95.2
63.6
84.2
11.42
12.00
12.84
12.48
101.2
93.6
111.6
102.2
78.4
91.4
61.4
82.2
13.62
13.22
14.02
13.68
BYPASS
FACTOR
(BF)
79
81
.05
.10
.20
.30
1.04
.98
.87
.76
NOTES:
1. Direct interpolation is permissible. Do not extrapolate.
2. The following formulas may be used:
sensible capacity (Btuh)
1.10 x cfm
72
137.0
70.2
8.64
133.8
70.0
9.60
130.0
69.6
10.62
124.6
67.8
11.68
120.0
67.4
12.96
113.6
65.4
14.14
67
129.0
93.4
8.38
126.0
94.2
9.36
121.2
93.4
10.36
115.6
91.4
11.38
110.0
90.2
12.56
103.8
88.0
13.76
62
120.6
115.6
8.20
116.4
112.8
9.08
112.6
110.2
10.08
108.4
106.2
11.16
103.8
101.8
12.30
99.0
97.2
13.54
ENTERING AIR DRY-BULB TEMP (F)
78
77
76
75
under 75
82
83
84
85
over 85
Correction Factor
2.07
3.11
4.14
5.18
1.96
2.94
3.92
4.90
Use formula
1.74
2.62
3.49
4.36
shown below.
1.53
2.29
3.05
3.82
Interpolation is permissible.
Correction Factor = 1.10 x (1 – BF) x (edb – 80).
tlwb = Wet-bulb temperature corresponding to enthalpy of air leaving
indoor coil (hlwb)
hlwb = hewb –
62
117.8
108.8
8.10
114.0
107.4
9.02
109.4
104.8
9.96
105.0
101.8
11.00
100.2
98.0
12.12
95.8
94.0
13.34
Where: hewb = Enthalpy of air entering evaporator coil
3. The SHC is based on 80 F edb temperature of air entering indoor coil.
Below 80 F edb, subtract (corr factor x cfm) from SHC.
Above 80 F edb, add (corr factor x cfm) to SHC..
LEGEND
Bypass Factor
Entering Dry-Bulb
Entering Wet-Bulb
Compressor Motor Power Input
Leaving Dry-Bulb
Leaving Wet-Bulb
Sensible Heat Capacity (1000 Btuh) Gross
Total Capacity (1000 Btuh) Gross
tldb = tedb –
4700/0.21
total capacity (Btuh)
4.5 x cfm
INSTANTANEOUS AND INTEGRATED HEATING RATINGS
548F036
Return
Air
(F db)
55
70
80
Cfm
(Standard
Air)
Cap.
900
kW
Cap.
1200
kW
Cap.
1500
kW
Cap.
900
kW
Cap.
1200
kW
Cap.
1500
kW
Cap.
900
kW
Cap.
1200
kW
Cap.
1500
kW
Air Temperature Entering Outdoor Coil (F)
0
10
17
30
40
47
50
60
15.4
13.1
2.25
13.5
15.9
2.24
13.8
16.2
2.23
11.2
13.2
2.29
11.6
13.7
2.28
11.9
14.0
2.27
9.8
11.5
2.30
10.2
12.0
2.30
10.5
12.3
2.29
19.2
17.6
2.44
19.4
17.8
2.40
19.8
18.2
2.38
17.1
15.7
2.50
17.7
16.3
2.49
18.1
16.6
2.47
15.5
14.2
2.54
16.2
14.8
2.52
16.6
15.2
2.51
21.7
19.8
2.57
22.5
20.5
2.54
22.9
20.9
2.52
20.0
18.2
2.67
20.3
18.5
2.62
20.7
18.9
2.60
18.4
16.8
2.71
19.2
17.5
2.69
19.7
18.0
2.68
27.4
24.0
2.86
28.3
24.8
2.80
28.8
25.2
2.76
25.4
22.2
2.98
26.3
23.1
2.93
26.9
23.6
2.89
23.7
20.8
3.04
24.7
21.6
2.99
25.4
22.3
2.97
31.9
31.9
3.10
32.9
32.9
3.02
33.1
33.1
2.94
29.8
29.8
3.24
30.8
30.8
3.17
31.6
31.6
3.12
28.1
28.1
3.32
29.3
29.3
3.26
30.1
30.1
3.22
35.3
35.3
3.29
35.8
35.8
3.15
35.3
35.3
3.03
33.2
33.2
3.45
34.4
34.4
3.36
35.1
35.1
3.30
31.7
31.7
3.55
33.0
33.0
3.47
33.7
33.7
3.41
36.9
36.9
3.38
37.0
37.0
3.21
36.5
36.5
3.08
34.7
34.7
3.55
36.0
36.0
3.45
36.9
36.9
3.38
33.2
33.2
3.65
34.5
34.5
3.56
35.3
35.3
3.50
41.4
41.4
3.64
40.1
40.1
3.35
38.6
38.6
3.17
40.1
40.1
3.91
40.9
40.9
3.72
40.2
40.2
3.54
38.5
38.5
4.03
40.2
40.2
3.91
39.2
39.2
3.70
LEGEND
Cap. — Heating Capacity (1000 Btuh) (includes indoor-fan motor heat)
db — dry bulb
kW — Total Power Input (includes compressor motor power input,
outdoor-fan motor input, and indoor-fan motor input)
NOTES:
1.
indicates integrated ratings.
2. Integrated capacity is maximum (instantaneous) capacity less the
effect of frost on the outdoor coil and the heat required to defrost it.
28
PERFORMANCE DATA (cont)
548F048
Return
Air
(F db)
55
70
80
Cfm
(Standard
Air)
Cap.
1200
kW
Cap.
1600
kW
Cap.
2000
kW
Cap.
1200
kW
Cap.
1600
kW
Cap.
2000
kW
Cap.
1200
kW
Cap.
1600
kW
Cap.
2000
kW
Air Temperature Entering Outdoor Coil (F)
0
10
17
30
40
47
50
60
22.7 19.3
2.91
23.1 19.7
2.87
23.4 19.9
2.85
20.6 17.5
3.00
21.2 18.0
2.99
21.6 18.3
2.97
18.6 15.8
3.01
19.4 16.4
3.01
19.8 16.8
3.01
26.6 24.4
3.14
27.2 25.0
3.09
27.4 25.2
3.05
25.5 23.4
3.33
25.6 23.5
3.25
25.9 23.8
3.22
23.9 21.9
3.40
24.7 22.6
3.37
25.1 23.1
3.35
30.2 27.6
3.35
30.8 28.1
3.28
31.2 28.4
3.23
28.4 25.9
3.52
29.1 26.6
3.47
29.5 26.9
3.43
27.1 24.7
3.62
27.8 25.4
3.58
28.2 25.7
3.54
37.4 32.7
3.77
38.2 33.5
3.66
38.7 33.9
3.59
35.6 31.2
4.01
36.3 31.8
3.90
36.9 32.3
3.84
34.2 29.9
4.15
35.1 30.8
4.06
35.7 31.3
4.00
43.1 43.1
4.12
44.1 44.1
3.97
44.8 44.8
3.88
41.0 41.0
4.39
42.1 42.1
4.25
42.8 42.8
4.16
39.7 39.7
4.56
40.7 40.7
4.43
41.5 41.5
4.35
47.6 47.6
4.40
48.9 48.9
4.23
49.7 49.7
4.11
45.5 45.5
4.71
46.8 46.8
4.54
47.5 47.5
4.42
44.1 44.1
4.90
45.3 45.3
4.74
46.0 46.0
4.63
49.8 49.8
4.54
51.1 51.1
4.34
52.0 52.0
4.23
47.5 47.5
4.85
48.9 48.9
4.67
49.7 49.7
4.55
46.1 46.1
5.06
47.3 47.3
4.88
48.2 48.2
4.76
57.2 57.2
5.04
59.0 59.0
4.80
60.2 60.2
4.65
54.9 54.9
5.40
56.5 56.5
5.15
57.6 57.6
5.00
53.2 53.2
5.63
54.9 54.9
5.39
55.8 55.8
5.24
0
10
17
30
40
47
50
60
29.7 25.2
3.96
29.8 25.4
3.83
29.8 25.4
3.76
28.7 24.4
4.43
29.0 24.7
4.30
29.2 24.8
4.22
28.1 23.8
4.77
28.4 24.2
4.63
28.6 24.3
4.55
34.5 31.7
4.14
34.7 31.8
3.98
34.8 31.9
3.89
33.8 31.0
4.66
34.0 31.2
4.48
34.2 31.4
4.38
33.1 30.4
5.03
33.5 30.7
4.84
33.7 30.9
4.73
38.4 35.0
4.30
38.6 35.2
4.12
38.7 35.3
4.01
37.8 34.4
4.84
38.0 34.7
4.63
38.2 34.8
4.51
37.2 33.9
5.23
37.6 34.2
5.01
37.7 34.4
4.88
46.0 40.3
4.62
46.3 40.6
4.38
46.6 40.8
4.26
45.4 39.8
5.21
45.7 40.1
4.94
45.8 40.2
4.78
44.9 39.3
5.64
45.3 39.7
5.34
45.5 39.8
5.17
52.4 52.4
4.90
52.9 52.9
4.63
53.1 53.1
4.47
51.5 51.5
5.53
51.9 51.9
5.20
52.2 52.2
5.01
51.0 51.0
5.99
51.4 51.4
5.63
51.6 51.6
5.42
57.2 57.2
5.14
57.7 57.7
4.82
58.0 58.0
4.63
56.2 56.2
5.79
56.7 56.7
5.41
57.1 57.1
5.21
55.6 55.6
6.27
56.1 56.1
5.86
56.4 56.4
5.62
59.6 59.6
5.25
60.1 60.1
4.91
60.4 60.4
4.72
58.4 58.4
5.91
59.0 59.0
5.52
59.4 59.4
5.30
57.8 57.8
6.41
58.3 58.3
5.97
58.7 58.7
5.72
67.9 67.9
5.67
68.7 68.7
5.25
68.4 68.4
4.99
66.5 66.5
6.39
67.4 67.4
5.91
67.9 67.9
5.63
65.7 65.7
6.92
66.5 66.5
6.39
67.0 67.0
6.09
548F060
Return
Air
(F db)
55
70
80
Cfm
(Standard
Air)
Cap.
1500
kW
Cap.
2000
kW
Cap.
2500
kW
Cap.
1500
kW
Cap.
2000
kW
Cap.
2500
kW
Cap.
1500
kW
Cap.
2000
kW
Cap.
2500
kW
Air Temperature Entering Outdoor Coil (F)
LEGEND
Cap. — Heating Capacity (1000 Btuh) (includes indoor-fan motor heat)
db — dry bulb
kW — Total Power Input (includes compressor motor power input,
outdoor-fan motor input, and indoor-fan motor input)
NOTES:
1.
indicates integrated ratings.
2. Integrated capacity is maximum (instantaneous) capacity less the
effect of frost on the outdoor coil and the heat required to defrost it.
29
50TFQ004-012
548F036-120
INSTANTANEOUS AND INTEGRATED HEATING RATINGS (cont)
50TFQ004-012
548F036-120
PERFORMANCE DATA (cont)
INSTANTANEOUS AND INTEGRATED HEATING RATINGS (cont)
548F072
Return
Air
(F db)
55
70
80
Cfm
(Standard
Air)
Cap.
1800
kW
Cap.
2400
kW
Cap.
3000
kW
Cap.
1800
kW
Cap.
2400
kW
Cap.
3000
kW
Cap.
1800
kW
Cap.
2400
kW
Cap.
3000
kW
Air Temperature Entering Outdoor Coil (F)
0
10
17
30
40
47
50
60
37.8 32.2
4.72
37.9 32.2
4.55
38.0 32.3
4.46
37.3 31.7
5.32
37.5 31.9
5.13
37.6 32.0
5.03
36.8 31.3
5.75
37.0 31.4
5.55
37.1 31.5
5.44
43.9 40.3
4.97
44.0 40.4
4.76
44.0 40.4
4.64
43.6 40.0
5.61
43.8 40.2
5.38
43.9 40.3
5.25
43.1 39.6
6.09
43.4 39.8
5.83
43.5 39.9
5.68
48.3 44.1
5.16
48.5 44.2
4.92
48.5 44.3
4.78
48.1 43.9
5.84
48.2 43.9
5.57
48.3 44.0
5.41
47.9 43.7
6.34
48.0 43.8
6.04
48.1 43.9
5.87
58.0 50.8
5.58
58.4 51.2
5.28
58.5 51.3
5.09
57.5 50.4
6.33
57.7 50.5
5.97
57.8 50.7
5.76
57.1 50.1
6.88
57.4 50.3
6.49
57.5 50.4
6.26
66.2 66.2
5.96
66.6 66.6
5.57
66.9 66.9
5.35
65.2 65.2
6.75
65.6 65.6
6.32
66.0 66.0
6.08
64.8 64.8
7.35
65.1 65.1
6.87
65.3 65.3
6.60
72.3 72.3
6.25
72.8 72.8
5.81
73.1 73.1
5.56
71.1 71.1
7.10
71.8 71.8
6.61
72.1 72.1
6.32
70.5 70.5
7.72
71.1 71.1
7.18
71.5 71.5
6.88
75.2 75.2
6.40
75.9 75.9
5.93
76.2 76.2
5.67
74.0 74.0
7.27
74.7 74.7
6.74
75.0 75.0
6.44
73.4 73.4
7.90
73.9 73.9
7.33
74.4 74.4
7.01
86.0 86.0
6.95
87.0 87.0
6.38
87.5 87.5
6.07
84.6 84.6
7.91
85.4 85.4
7.25
86.0 86.0
6.89
83.6 83.6
8.58
84.5 84.5
7.89
85.0 85.0
7.49
0
10
17
30
40
47
50
60
36.6 31.2
5.24
37.6 32.0
5.18
38.2 32.4
5.16
32.4 27.6
5.42
33.4 28.4
5.38
34.2 29.0
5.36
29.2 24.8
5.52
30.2 25.8
5.48
31.0 26.4
5.46
44.0 40.4
5.64
45.2 41.4
5.56
45.8 42.0
5.50
40.4 37.2
5.90
41.8 38.2
5.82
42.2 38.6
5.76
37.4 34.4
6.02
38.8 35.6
5.96
39.6 36.4
5.92
49.8 45.4
5.94
51.2 46.6
5.82
51.8 47.2
5.74
46.0 41.8
6.22
47.4 43.2
6.12
48.4 44.0
6.06
43.4 39.6
6.40
44.6 40.6
6.30
45.4 41.4
6.24
61.4 53.8
6.58
63.0 55.2
6.40
63.8 55.8
6.28
57.8 50.6
6.92
59.6 52.2
6.76
60.6 53.0
6.66
54.8 48.0
7.12
56.8 49.8
6.98
58.0 50.8
6.90
70.4 70.4
7.08
72.4 72.4
6.84
73.6 73.6
6.70
66.8 66.8
7.48
68.8 68.8
7.28
70.0 70.0
7.14
64.0 64.0
7.72
66.2 66.2
7.54
67.4 67.4
7.42
77.4 77.4
7.50
79.6 79.6
7.20
81.0 81.0
7.02
73.6 73.6
7.94
75.8 75.8
7.68
77.2 77.2
7.50
70.8 70.8
8.22
73.2 73.2
7.98
74.6 74.6
7.82
80.6 80.6
7.68
83.0 83.0
7.36
83.8 83.8
7.12
76.6 76.6
8.16
79.0 79.0
7.86
80.6 80.6
7.68
73.8 73.8
8.44
76.4 76.4
8.18
78.0 78.0
8.00
91.8 91.8
8.32
92.4 92.4
7.78
91.2 91.2
7.40
87.8 87.8
8.90
90.4 90.4
8.48
91.0 91.0
8.16
84.8 84.8
9.24
87.8 87.8
8.88
89.0 89.0
8.58
548F090
Return
Air
(F db)
55
70
80
Cfm
(Standard
Air)
Cap.
2000
kW
Cap.
2600
kW
Cap.
3200
kW
Cap.
2000
kW
Cap.
2600
kW
Cap.
3200
kW
Cap.
2000
kW
Cap.
2600
kW
Cap.
3200
kW
Air Temperature Entering Outdoor Coil (F)
LEGEND
Cap. — Heating Capacity (1000 Btuh) (includes indoor-fan motor heat)
db — dry bulb
kW — Total Power Input (includes compressor motor power input,
outdoor-fan motor input, and indoor-fan motor input)
NOTES:
1.
indicates integrated ratings.
2. Integrated capacity is maximum (instantaneous) capacity less the
effect of frost on the outdoor coil and the heat required to defrost it.
30
PERFORMANCE DATA (cont)
548F102
Return
Air
(F db)
55
70
80
Cfm
(Standard
Air)
Cap.
2400
kW
Cap.
3200
kW
Cap.
3600
kW
Cap.
4000
kW
Cap.
2400
kW
Cap.
3200
kW
Cap.
3600
kW
Cap.
4000
kW
Cap.
2400
kW
Cap.
3200
kW
Cap.
3600
kW
Cap.
4000
kW
Air Temperature Entering Outdoor Coil (F)
0
10
17
30
40
47
37.0 34.1
5.30
40.7 37.4
5.88
42.6 39.2
6.29
44.8 41.2
6.78
30.0 27.6
5.38
33.3 30.6
5.96
35.1 32.3
6.37
37.1 34.2
6.85
25.7 23.7
5.52
28.6 26.3
6.05
30.2 27.8
6.43
32.2 29.6
6.90
47.1 43.3
5.81
51.31 47.1
6.36
53.4 49.1
6.75
55.7 51.1
7.23
39.8 36.5
5.97
43.8 40.2
6.53
45.8 42.1
6.92
48.0 44.1
7.39
35.0 32.1
6.07
38.5 35.3
6.62
40.5 37.1
7.00
42.6 39.1
7.47
54.8 50.0
6.18
59.28 54.0
6.69
61.5 56.1
7.07
63.9 58.2
7.53
47.4 43.2
6.41
51.8 47.2
6.93
53.9 49.2
7.31
56.2 51.3
7.77
42.4 38.6
6.52
46.5 42.4
7.06
48.6 44.3
7.44
50.9 46.4
7.90
70.3 61.6
6.92
75.51 66.2
7.35
78.1 68.4
7.70
80.7 70.7
8.15
62.8 55.0
7.25
68.0 59.6
7.70
70.4 61.7
8.06
72.9 63.9
8.50
57.6 50.5
7.45
62.6 54.9
7.91
65.0 57.0
8.27
67.5 59.2
8.71
83.2 83.2
7.56
88.59 88.6
7.96
90.9 90.9
8.29
93.1 93.1
8.70
75.4 75.4
7.95
81.5 81.5
8.34
84.1 84.1
8.68
86.7 86.7
9.10
70.1 70.1
8.21
75.9 75.9
8.59
78.6 78.6
8.92
81.2 81.2
9.34
92.0 92.0
8.11
96.82 96.8
8.30
98.9 98.9
8.56
98.8 98.8
8.88
85.0 85.0
8.55
91.0 91.0
8.91
92.4 92.4
9.21
95.8 95.8
9.57
79.7 79.7
8.82
86.0 86.0
9.18
88.7 88.7
9.50
91.3 91.3
9.91
50
60
95.5
95.5 107.9 107.9
8.27
8.92
100.58 100.6 112.54 112.5
8.44
8.93
102.6 102.6 114.5 114.5
8.70
9.14
104.6 104.6 116.5 116.5
9.05
9.46
89.0
89.0 101.6 101.6
8.85
9.61
94.6
94.6 107.5 107.5
9.08
9.68
97.1
97.1 109.8 109.8
9.35
9.90
99.5
99.5 112.0 112.0
9.71
10.21
83.9
83.9
96.8
96.8
9.12
10.05
90.2
90.2 103.2 103.2
9.48
10.14
92.8
92.8 105.8 105.8
9.78
10.37
95.2
95.2 108.3 108.3
10.13
10.70
548F120
Return
Air
(F db)
55
70
80
Cfm
(Standard
Air)
Cap.
2650
kW
Cap.
3500
kW
Cap.
4100
kW
Cap.
4400
kW
Cap.
2650
kW
Cap.
3500
kW
Cap.
4100
kW
Cap.
4400
kW
Cap.
2650
kW
Cap.
3500
kW
Cap.
4100
kW
Cap.
4400
kW
Air Temperature Entering Outdoor Coil (F)
0
10
17
30
40
47
50
60
52.2 44.4
7.20
52.7 44.8
6.98
53.2 45.2
6.88
53.2 45.2
6.84
49.8 42.2
8.08
50.6 43.0
7.86
51.0 43.2
7.74
51.0 43.4
7.70
47.6 40.6
8.72
48.6 41.4
8.48
49.0 41.8
8.36
49.2 41.8
8.32
62.2 57.0
7.58
62.8 57.6
7.30
63.0 58.0
7.16
63.2 58.0
7.12
59.2 54.4
8.50
60.2 55.2
8.20
60.6 55.6
8.06
60.8 55.8
8.02
57.6 52.8
9.20
58.6 53.8
8.88
58.6 53.8
8.72
58.8 54.0
8.66
69.6 63.4
7.86
70.2 64.0
7.52
70.4 64.2
7.38
70.6 64.4
7.32
67.0 61.2
8.86
63.2 62.2
8.50
68.6 62.6
8.32
68.8 62.6
8.26
64.6 58.8
9.56
66.0 60.2
9.18
66.6 60.8
9.02
66.8 61.0
8.94
84.2 73.8
8.46
85.0 74.4
8.02
85.2 74.8
7.82
85.4 74.8
7.74
82.0 72.0
9.56
83.2 72.8
9.04
83.6 73.2
8.82
83.8 73.4
8.74
80.2 70.4
10.36
81.6 71.4
9.82
82.0 71.8
9.58
82.2 72.2
9.48
96.0 96.0
9.00
96.8 96.8
8.46
97.2 97.2
8.22
97.4 97.4
8.14
94.0 94.0
10.14
95.2 95.2
9.52
95.6 95.6
9.26
95.8 95.8
9.16
92.0 92.0
11.00
93.6 93.6
10.34
94.2 94.2
10.04
94.4 94.4
9.92
104.6 104.6
9.42
105.8 105.8
8.80
105.8 105.8
8.54
106.0 106.0
8.44
102.6 102.6
10.62
103.8 103.8
9.92
104.2 104.2
9.62
104.4 104.4
9.50
101.0 101.0
11.52
102.4 102.4
10.74
103.0 103.0
10.42
103.2 103.2
10.28
108.8 108.8
9.62
109.8 109.8
8.96
110.2 110.2
8.68
110.4 110.4
8.58
106.8 106.8
10.86
108.0 108.0
10.10
108.4 108.4
9.78
108.6 108.6
9.66
105.2 105.2
11.76
106.6 106.6
10.96
107.2 107.2
10.60
107.4 107.4
10.46
123.6 123.6
10.38
125.4 125.4
9.62
126.0 126.0
9.28
126.4 126.4
9.14
121.2 121.2
11.72
122.8 122.8
10.80
123.4 123.4
10.40
123.8 123.8
10.26
119.8 119.8
12.70
121.2 121.2
11.70
121.8 121.8
11.28
122.2 122.2
11.10
LEGEND
Cap. — Heating Capacity (1000 Btuh) (includes indoor-fan motor heat)
db — dry bulb
kW — Total Power Input (includes compressor motor power input,
outdoor-fan motor input, and indoor-fan motor input)
NOTES:
1.
indicates integrated ratings.
2. Integrated capacity is maximum (instantaneous) capacity less the
effect of frost on the outdoor coil and the heat required to defrost it.
31
50TFQ004-012
548F036-120
INSTANTANEOUS AND INTEGRATED HEATING RATINGS (cont)
50TFQ004-012
548F036-120
PERFORMANCE DATA (cont)
FAN PERFORMANCE — VERTICAL DISCHARGE UNITS
548F036 (3 TONS) — STANDARD MOTOR (DIRECT DRIVE)
Low Speed
Airflow
(Cfm)
ESP
0.67
0.60
0.55
0.51
0.45
0.38
0.34
900
1000
1100
1200
1300
1400
1500
Bhp
ESP
Watts
—
—
—
208 v
Bhp
0.21
0.23
0.24
0.26
0.27
0.29
0.30
Watts
253
270
287
304
321
338
355
High Speed
ESP
0.68
0.61
0.56
0.51
0.46
0.41
0.36
230, 460, 575 v
Bhp
Watts
0.23
277
0.25
292
0.26
307
0.27
323
0.29
338
0.30
354
0.31
369
LEGEND
Brake Horsepower Input to Fan
External Static Pressure (in. wg)
Input Watts to Motor
ESP
0.69
0.61
0.57
0.52
0.46
0.43
0.38
208 v
Bhp
0.26
0.27
0.28
0.29
0.31
0.32
0.33
Watts
307
321
335
349
364
378
392
230, 460, 575 v
Bhp
Watts
0.31
363
0.32
374
0.33
385
0.34
397
0.34
408
—
—
—
—
ESP
0.69
0.63
0.58
0.53
0.47
—
—
Refer to page 51 for general Fan Performance notes.
548F036 (3 TONS) — ALTERNATE MOTOR (BELT DRIVE)*
Airflow
(Cfm)
Rpm
581
644
687
733
754
810
841
900
1000
1100
1200
1300
1400
1500
0.1
Bhp
0.12
0.19
0.22
0.26
0.29
0.35
0.42
Watts
119
189
219
259
288
348
418
Rpm
673
709
746
785
826
868
911
0.2
Bhp
0.18
0.22
0.26
0.32
0.38
0.45
0.53
Watts
179
219
259
318
378
448
527
External Static Pressure (in. wg)
0.3
0.4
Rpm
Bhp
Watts Rpm
Bhp
Watts
805
0.25
249
736
0.22
219
782
0.28
279
835
0.30
298
806
0.30
298
867
0.35
348
843
0.35
348
903
0.41
408
891
0.43
428
942
0.48
477
937
0.51
507
984
0.57
567
985
0.61
607
1029
0.66
656
Rpm
865
900
929
960
991
1032
1073
0.5
Bhp
0.29
0.35
0.40
0.47
0.53
0.62
0.72
Watts
288
348
398
467
527
617
716
Rpm
911
937
964
994
1047
1067
1109
0.6
Bhp
0.34
0.38
0.40
0.50
0.60
0.67
0.77
Watts
338
378
398
497
597
666
766
External Static Pressure (in. wg)
0.9
1.0
Bhp
Watts Rpm
Bhp
Watts
0.45
448
1061
0.47
487
0.51
507
1086
0.55
547
0.58
577
1109
0.61
607
0.64
647
1156
0.68
676
0.72
716
1190
0.76
756
0.81
806
1237
0.85
845
0.90
895
1271
0.95
945
Rpm
1083
1111
1127
1203
1228
1293
1317
1.1
Bhp
0.53
0.59
0.64
0.71
0.80
0.89
1.00
Watts
527
587
637
706
796
885
995
Rpm
1105
1136
1145
1250
1266
1349
1363
1.2
Bhp
0.57
0.63
0.67
0.74
0.84
0.93
1.05
Watts
567
627
666
736
836
925
1044
548F036 (3 TONS) — ALTERNATE MOTOR (BELT DRIVE)* (cont)
Airflow
(Cfm)
Rpm
957
992
1013
1045
1075
1110
1150
900
1000
1100
1200
1300
1400
1500
Bhp
Watts
—
—
0.7
Bhp
0.39
0.44
0.49
0.56
0.64
0.73
0.82
Watts
388
438
487
557
637
726
816
Rpm
988
1039
1068
1090
1122
1160
1190
0.8
Bhp
0.43
0.49
0.55
0.64
0.70
0.84
1.00
Watts
428
487
547
637
696
766
855
Rpm
1039
1061
1090
1109
1152
1181
1225
LEGEND
Brake Horsepower Input to Fan
Input Watts to Motor
Refer to page 51 for general Fan Performance notes.
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum usable watts input is 1000 and maximum continuous bhp is 1.00.
*Motor drive range: 760 to 1000 rpm. All other rpms require field-supplied drive.
548F036 (3 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)*
Airflow
(Cfm)
Rpm
673
709
746
785
826
868
911
900
1000
1100
1200
1300
1400
1500
0.2
Bhp
0.18
0.22
0.26
0.32
0.38
0.45
0.53
Watts
179
219
259
318
378
448
527
Rpm
805
835
867
903
942
984
1029
0.4
Bhp
0.25
0.30
0.35
0.41
0.48
0.57
0.66
External Static Pressure (in. wg)
0.6
Watts
Rpm
Bhp
Watts
Rpm
249
911
0.34
338
988
298
937
0.38
378
1039
348
964
0.40
398
1068
1090
408
994
0.50
497
1122
477
1047
0.60
597
1160
567
1067
0.67
666
1109
0.77
766
1190
656
0.8
Bhp
0.43
0.49
0.55
0.64
0.70
0.84
1.00
Watts
428
487
547
637
696
766
855
Rpm
1061
1086
1109
1156
1190
1237
1271
1.0
Bhp
0.47
0.55
0.61
0.68
0.76
0.85
0.95
Watts
487
547
607
676
756
845
945
External Static Pressure (in. wg)
1.6
Watts
Rpm
Bhp
Watts
Rpm
622
1170
0.68
674
1198
688
1203
0.75
745
1232
731
1213
0.80
792
1242
808
1282
0.88
875
1312
917
1341
1.00
993
1373
1015
1429
1.11
1100
1463
1146
1465
1.25
1242
1500
1.8
Bhp
0.73
0.80
0.85
0.94
1.07
1.19
1.34
Watts
723
799
850
939
1066
1180
1332
Rpm
1224
1258
1268
1340
1402
1494
1532
2.0
Bhp
0.77
0.86
0.91
1.01
1.14
1.26
1.43
Watts
771
852
906
1000
1136
1257
1419
548F036 (3 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)* (cont)
Airflow
(Cfm)
900
1000
1100
1200
1300
1400
1500
Bhp
Watts
—
—
Rpm
1105
1136
1145
1210
1266
1349
1383
1.2
Bhp
0.57
0.63
0.67
0.74
0.84
0.93
1.05
Watts
567
627
666
736
836
925
1044
Rpm
1140
1172
1181
1248
1306
1391
1426
1.4
Bhp
0.63
0.69
0.73
0.81
0.92
1.02
1.15
LEGEND
Brake Horsepower Input to Fan
Input Watts to Motor
Refer to page 51 for general Fan Performance notes.
NOTES:
1. Boldface indicates field-supplied drive is required.
2. Maximum continuous bhp is 2.4, and the maximum continuous watts are
2120.
*Motor drive range: 1075 to 1455 rpm. All other rpms require field-supplied drive.
32
PERFORMANCE DATA (cont)
548F048 (4 TONS) — STANDARD MOTOR (DIRECT DRIVE)
Low Speed
Airflow
208 v
(Cfm)
ESP
Bhp
Watts
ESP
0.93
0.41
458
0.94
1200
0.86
0.42
471
0.87
1300
0.78
0.45
503
0.79
1400
0.70
0.47
536
0.73
1500
0.61
0.49
557
0.64
1600
0.51
0.52
584
0.54
1700
0.40
0.54
610
0.44
1800
0.29
0.56
629
0.37
1900
0.25
0.58
651
0.30
2000
Bhp
—
ESP
—
Watts —
High Speed
230, 460, 575 v
Bhp
0.45
0.46
0.49
0.52
0.54
0.57
0.60
0.62
0.64
Watts
506
521
556
593
616
646
674
696
720
208 v
Bhp
0.51
0.52
0.54
0.56
0.58
0.60
0.62
0.64
0.66
ESP
0.94
0.87
0.79
0.73
0.66
0.58
0.51
0.46
0.39
Watts
572
589
616
631
654
678
698
720
744
ESP
0.99
0.92
0.87
0.80
0.76
0.68
0.63
0.56
0.50
230, 460, 575 v
Bhp
0.56
0.58
0.60
0.62
0.64
0.66
0.68
0.70
0.73
Watts
632
651
681
698
723
750
772
796
823
Refer to page 51 for general Fan Performance notes.
LEGEND
Brake Horsepower Input to Fan
External Static Pressure (in. wg)
Input Watts to Motor
548F048 (4 TONS) — ALTERNATE MOTOR (BELT DRIVE)*
Airflow
(Cfm)
1200
1300
1400
1500
1600
1700
1800
1900
2000
Rpm
542
576
610
646
681
718
754
791
828
0.1
Bhp
0.16
0.20
0.24
0.28
0.33
0.39
0.45
0.52
0.60
Watts
168
210
252
294
347
410
473
546
630
Rpm
616
644
673
704
735
768
801
836
870
0.2
Bhp
0.21
0.25
0.30
0.35
0.40
0.46
0.53
0.60
0.68
Watts
221
263
315
368
420
483
557
630
714
Rpm
678
704
732
761
790
836
851
832
864
0.3
Bhp
0.27
0.31
0.36
0.42
0.47
0.54
0.61
0.69
0.77
External Static Pressure (in. wg)
0.4
Watts
Rpm
Bhp
Watts
Rpm
842
278
739
0.32
336
867
326
764
0.37
389
889
378
791
0.42
441
912
436
818
0.48
504
845
0.54
567
920
494
562
873
0.61
641
965
641
900
0.69
725
992
720
828
0.77
809
1019
809
858
0.86
904
1046
0.6
Bhp
0.44
0.50
0.55
0.61
0.68
0.76
0.84
0.93
1.03
Watts
462
525
578
641
695
777
858
950
1053
Rpm
886
910
933
957
931
1005
1032
1058
1085
0.7
Bhp
0.50
0.56
0.62
0.69
0.76
0.84
0.92
1.02
1.12
Watts
525
588
651
720
772
853
940
1037
1139
1.6
Bhp
1.00
1.15
1.22
1.33
1.46
1.58
1.71
1.85
1.98
Watts
885
1100
1167
1272
1396
1511
1635
1769
1894
Rpm
—
1277
1305
1337
1350
1370
1393
1417
1440
1.8
Bhp
—
1.27
1.38
1.47
1.60
1.77
1.89
2.03
2.18
Watts
—
1029
1190
1350
1558
1738
1907
2068
2229
Rpm
929
952
976
1001
1023
1045
1071
1097
1124
0.8
Bhp
0.56
0.62
0.69
0.76
0.83
0.91
1.00
1.10
1.21
Watts
588
651
725
777
848
930
1022
1124
1237
548F048 (4 TONS) — ALTERNATE MOTOR (BELT DRIVE)* (cont)
Airflow
(Cfm)
1200
1300
1400
1500
1600
1700
1800
1900
2000
Rpm
1008
1029
1052
1076
1100
1124
1147
1169
1194
1.0
Bhp
0.67
0.75
0.83
0.91
1.00
1.09
1.18
1.27
1.38
Watts
704
788
826
905
995
1084
1174
1263
1373
Rpm
1052
1065
1087
1111
1134
1158
1182
1205
1228
1.1
Bhp
0.73
0.81
0.90
0.99
1.08
1.17
1.27
1.37
1.48
Watts
762
846
890
980
1069
1164
1263
1363
1472
Rpm
1096
1101
1121
1145
1168
1192
1217
1240
1262
External Static Pressure (in. wg)
1.2
1.4
Bhp
Watts
Rpm
Bhp
0.78
820
1134
0.89
0.86
904
1174
1.01
0.96
918
1183
1.09
1.06
1014
1208
1.20
1.15
1100
1232
1.31
1.25
1196
1255
1.42
1.36
1301
1279
1.54
1.47
1406
1303
1.66
1.58
1511
1327
1.78
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
Watts
835
1040
1042
1138
1253
1358
1473
1588
1702
Rpm
1203
1229
1255
1274
1291
1314
1381
1408
1436
NOTES:
1. Boldface indicates field-supplied motor drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum usable watts input is 1000 and maximum continuous bhp is 1.00.
*Motor drive range: 835 to 1185 rpm. All other rpms require field-supplied drive.
Refer to page 51 for general Fan Performance notes.
548F048 (4 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)*
Airflow
(Cfm)
1200
1300
1400
1500
1600
1700
1800
1900
2000
Rpm
665
699
735
770
835
873
881
919
958
0.2
Bhp
0.25
0.30
0.36
0.42
0.49
0.57
0.66
0.75
0.86
Watts
263
315
378
441
515
599
693
788
904
Rpm
779
809
840
873
907
941
976
1011
1046
0.4
Bhp
0.36
0.42
0.48
0.55
0.63
0.72
0.81
0.92
1.03
Watts
378
441
504
578
662
757
851
967
1082
External Static Pressure (in. wg)
0.6
Rpm
Bhp
Watts
872
0.48
504
902
0.55
578
933
0.62
651
963
0.69
725
993
0.77
787
1024
0.87
889
1057
0.97
991
1091
1.08
1104
1125
1.21
1237
Rpm
957
984
1011
1041
1072
1103
1132
1162
1195
0.8
Bhp
0.60
0.67
0.75
0.84
0.93
1.04
1.14
1.25
1.38
Watts
630
704
788
858
950
1063
1165
1277
1410
Rpm
1028
1058
1086
1113
1141
1171
1202
1232
1262
1.0
Bhp
0.69
0.80
0.89
0.99
1.09
1.20
1.32
1.45
1.58
Watts
725
841
885
985
1084
1194
1313
1442
1572
Watts
935
988
1071
1215
1339
1463
1597
1731
1884
External Static Pressure (in. wg)
1.6
Rpm
Bhp
Watts
1185
0.88
965
1219
1.00
999
1257
1.17
1105
1295
1.37
1294
1326
1.54
1454
1354
1.70
1605
1381
1.85
1757
1408
2.00
1889
1436
2.16
2040
Rpm
1331
1268
1307
1339
1376
1407
1436
1463
1489
1.8
Bhp
0.99
1.10
1.25
1.43
1.65
1.84
2.02
2.19
2.36
Watts
1000
1029
1190
1350
1558
1738
1907
2068
2229
Rpm
1374
1309
1349
1382
1420
1452
1482
—
—
2.0
Bhp
1.09
1.21
1.37
1.57
1.81
2.02
2.22
—
—
Watts
1083
1203
1367
1564
1805
2013
2210
—
—
548F048 (4 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)* (cont)
Airflow
(Cfm)
1200
1300
1400
1500
1600
1700
1800
1900
2000
Rpm
1083
1121
1153
1180
1207
1235
1263
1294
1325
1.2
Bhp
0.74
0.89
1.00
1.13
1.25
1.37
1.49
1.63
1.78
Watts
778
935
976
1081
1196
1310
1425
1559
1702
Rpm
1134
1171
1210
1241
1269
1296
1323
1351
1362
1.4
Bhp
0.80
0.94
1.12
1.27
1.40
1.53
1.57
1.81
1.97
Refer to page 51 for general Fan Performance notes.
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
NOTES:
1. Boldface indicates field-supplied drive is required.
2. Maximum continuous bhp is 2.4 and the maximum continuous watts are 2120.
*Motor drive range: 1075 to 1455 rpm. All other rpms require field-supplied drive.
33
50TFQ004-012
548F036-120
FAN PERFORMANCE — VERTICAL DISCHARGE UNITS (cont)
50TFQ004-012
548F036-120
PERFORMANCE DATA (cont)
FAN PERFORMANCE — VERTICAL DISCHARGE UNITS (cont)
548F060 (5 TONS) — STANDARD MOTOR (DIRECT DRIVE)
Low Speed
Airflow
208 v
230, 460, 575 v
(Cfm)
ESP Bhp Watts ESP Bhp Watts ESP
0.88 0.67
750
1.20 0.71
791 1.19
1500
0.68 0.70
780
1.04 0.74
824 1.04
1600
0.51 0.73
810
0.89 0.77
857 0.89
1700
0.35 0.75
839
0.73 0.80
891 0.74
1800
0.26 0.78
873
0.58 0.83
924 0.59
1900
0.18 0.81
905
0.42 0.86
957 0.44
2000
0.08 0.84
940
0.27 0.89
990 0.29
2100
—
—
—
0.19 0.92 1023 0.19
2200
—
—
—
0.11 0.95 1056 0.11
2300
—
—
—
0.03 0.98 1096 0.04
2400
—
—
—
—
—
—
—
2500
208 v
Bhp
0.70
0.74
0.77
0.81
0.84
0.88
0.91
0.93
0.97
1.00
—
Medium Speed
230, 460, 575 v
Watts ESP Bhp Watts
782 1.36 0.76
845
821 1.22 0.79
883
861 1.09 0.83
921
900 0.96 0.86
959
940 0.86 0.90
997
979 0.73 0.93 1035
1018 0.59 0.96 1073
1035 0.46 1.00 1111
1076 0.34 1.03 1149
1113 0.19 1.07 1187
—
0.09 1.10 1225
ESP
1.38
1.25
1.13
1.00
0.88
0.78
0.63
0.49
0.41
0.22
0.12
208 v
Bhp
0.79
0.82
0.85
0.89
0.92
0.95
0.99
1.02
1.06
1.09
1.12
High Speed
230, 460, 575 v
Watts ESP Bhp Watts
875 1.44 0.85
949
913 1.33 0.89
988
950 1.22 0.92 1027
988 1.11 0.96 1066
1025 1.00 0.99 1105
1063 0.92 1.03 1144
1101 0.81 1.06 1183
1138 0.69 1.10 1222
1176 0.59 1.13 1261
1213 0.43 1.17 1300
1251 0.34 1.20 1340
Refer to page 51 for general Fan Performance notes.
LEGEND
Bhp
— Brake Horsepower Input to Fan
ESP — External Static Pressure (in. wg)
Watts — Input Watts to Motor
548F060 (5 TONS) — ALTERNATE MOTOR (BELT DRIVE)*
External Static Pressure (in. wg)
0.4
Watts
Rpm
Bhp
Watts
Rpm
990
409
896
0.53
542
931
0.61
623
1020
470
966
0.69
705
1051
552
634
1002
0.78
797
1084
736
1037
0.88
899
1119
838
1072
0.98
1001
1154
950
1108
1.10
1124
1192
1073
1145
1.22
1247
1225
1206
1183
1.36
1390
1260
1349
1222
1.45
1482
1296
1512
1262
1.68
1717
1331
0.6
Bhp
0.67
0.75
0.84
0.93
1.04
1.16
1.29
1.43
1.57
1.73
1.80
Watts
685
766
858
950
1063
1185
1318
1461
1604
1768
1921
Rpm
1072
1101
1133
1163
1194
1226
1259
1294
1330
1365
1400
0.8
Bhp
0.83
0.91
1.01
1.10
1.21
1.33
1.47
1.62
1.78
1.94
2.12
Watts
848
930
1032
1124
1237
1359
1502
1656
1819
1983
2166
548F060 (5 TONS) — ALTERNATE MOTOR (BELT DRIVE)* (cont)
External Static Pressure (in. wg)
Airflow
1.0
1.2
1.4
(Cfm)
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
1153
1.00
1022
1221
1.17
1196
1256
1.30
1328
1280
1500
1178
1.09
1114
1252
1.27
1298
1600
1311
1.45
1482
1340
1205
1.18
1206
1278
1.37
1400
1700
1345
1.57
1604
1397
1235
1.29
1318
1800
1303
1.48
1512
1371
1.69
1727
1433
1266
1.40
1431
1900
1330
1.59
1625
1396
1.80
1850
1460
1297
1.53
1564
2000
1362
1.73
1768
1422
1.94
1983
1485
2100
1327
1.66
1696
1393
1.80
1911
1452
2.08
2126
1510
1538
2200
1359
1.80
1850
1423
2.02
2064
1483
2.24
2289
1515
2.41
2463
1569
2300
1392
1.97
2013
1454
2.18
2228
1544
2.59
2647
1601
2400
1426
2.15
2197
1485
2.36
2412
1518
2.55
2606
1575
2.78
2841
1631
2500
1461
2.34
2391
1.6
Bhp
1.32
1.58
1.76
1.90
2.03
2.16
2.31
2.46
2.64
2.84
3.03
Watts
1349
1615
1799
1942
2074
2207
2361
2514
2698
2902
3096
Rpm
1320
1380
1424
1480
1517
1544
1569
1595
1622
1652
1684
1.8
Bhp
1.22
1.61
1.89
2.09
2.25
2.40
2.55
2.71
2.88
3.07
3.28
Watts
1400
1645
1931
2136
2299
2453
2606
2769
2943
3137
3352
Airflow
(Cfm)
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
Rpm
730
770
811
852
894
936
978
1021
1064
1107
1150
0.1
Bhp
0.34
0.40
0.47
0.55
0.54
0.74
0.85
0.97
1.10
1.24
1.39
Watts
347
409
480
562
552
756
869
991
1124
1267
1420
Rpm
789
826
865
905
945
984
1024
1064
1104
1145
1186
0.2
Bhp
0.40
0.46
0.54
0.62
0.72
0.82
0.93
1.05
1.18
1.32
1.48
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum usable watts input is 2120 and maximum continuous
bhp is 1.30 for single-phase units and 2.40 for 3-phase units.
*Motor drive range: 900 to 1300 rpm. All other rpms require fieldsupplied drive.
Refer to page 51 for general Fan Performance notes.
34
PERFORMANCE DATA (cont)
548F060 (5 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)*
Airflow
(Cfm)
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
Rpm
808
846
884
924
965
1008
1051
1095
1140
1185
1231
0.2
Bhp
0.42
0.49
0.57
0.66
0.76
0.87
0.99
1.12
1.26
1.41
1.57
Watts
429
501
582
674
777
889
1012
1145
1288
1441
1604
Rpm
914
950
983
1018
1057
1096
1136
1173
1210
1249
1289
0.4
Bhp
0.56
0.64
0.72
0.82
0.92
1.04
1.17
1.30
1.47
1.61
1.78
Watts
572
645
736
838
940
1063
1196
1328
1502
1645
1819
External Static Pressure (in. wg)
0.6
Rpm
Bhp
Watts
1001
0.69
705
1034
0.78
797
1068
0.88
899
1105
0.98
1001
1143
1.10
1124
1177
1.22
1247
1210
1.35
1380
1245
1.49
1523
1284
1.65
1686
1323
1.80
1860
1363
2.00
2044
Rpm
1084
1111
1145
1179
1212
1247
1284
1322
1356
1389
1424
0.8
Bhp
0.85
0.94
1.03
1.13
1.26
1.40
1.54
1.70
1.80
2.03
2.22
Watts
869
961
1053
1155
1288
1431
1574
1737
1901
2074
2269
Rpm
1168
1194
1218
1246
1280
1300
1347
1380
1418
1456
1500
1.0
Bhp
1.01
1.11
1.21
1.32
1.43
1.57
1.72
1.89
2.07
2.26
2.45
Watts
1032
1134
1237
1349
1461
1604
1758
1931
2115
2310
2504
Watts
1492
1523
1615
1747
1891
2034
2167
2350
2698
2948
3522
External Static Pressure (in. wg)
1.6
Rpm
Bhp
Watts
1250
1.69
1757
1299
1.78
1800
1352
1.80
1850
1435
1.91
1952
1478
2.05
2095
1505
2.21
2258
1533
2.45
2501
1568
2.64
2688
1627
3.03
3091
1726
3.31
3379
1760
3.96
4036
Rpm
1301
1352
1407
1494
1538
1566
1596
1632
1693
—
—
1.8
Bhp
1.91
2.01
2.03
2.15
2.31
2.49
2.77
2.97
3.42
—
—
Watts
1944
2047
2070
2197
2358
2542
2821
3031
3486
—
—
Rpm
1349
1401
1459
1548
1594
1624
1654
1691
1755
—
—
2.0
Bhp
2.12
2.23
2.26
2.40
2.57
2.77
3.08
3.31
3.81
—
—
Watts
2164
2280
2305
2446
2625
2830
3141
3375
3881
—
—
548F060 (5 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)* (cont)
Airflow
(Cfm)
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
Rpm
1199
1263
1295
1319
1343
1374
1409
1442
1475
1565
1596
1.2
Bhp
1.19
1.28
1.39
1.52
1.64
1.77
1.91
2.08
2.26
2.47
2.95
Watts
1216
1308
1420
1553
1676
1809
1952
2126
2310
2524
3010
Rpm
1126
1275
1351
1389
1415
1438
1465
1498
1554
1649
1682
1.4
Bhp
1.46
1.49
1.58
1.71
1.80
1.99
2.14
2.30
2.64
2.89
3.45
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 2.9 and the maximum continuous watts are 2562.
*Motor drive range: 1300 to 1685 rpm. All other rpms require field-supplied drive.
Refer to page 51 for general Fan Performance notes.
548F072 (6 TONS)* — STANDARD MOTOR (BELT DRIVE)
Airflow
(Cfm)
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
Rpm
852
894
936
978
1021
1064
1107
1150
1193
1237
1280
1324
1368
0.1
Bhp
0.55
0.64
0.74
0.85
0.97
1.10
1.24
1.39
1.56
1.74
1.94
2.15
2.37
Watts
562
630
708
795
891
998
1114
1241
1387
1543
1718
1901
2093
Rpm
905
945
984
1024
1064
1104
1145
1186
1228
1269
1311
1354
1396
0.2
Bhp
0.62
0.72
0.82
0.93
1.05
1.18
1.32
1.48
1.65
1.83
2.03
2.24
2.46
Watts
615
692
771
859
956
1064
1182
1318
1465
1621
1796
1980
2171
External Static Pressure (in. wg)
0.4
Rpm
Bhp
Watts
1002
0.78
739
1037
0.88
818
1072
0.98
899
1108
1.10
998
1145
1.22
1097
1183
1.36
1216
1222
1.52
1353
1262
1.68
1491
1301
1.86
1648
1341
2.05
1814
1381
2.25
1989
1420
2.47
2180
1460
2.69
2369
Rpm
1084
1119
1154
1190
1225
1260
1296
1331
1367
1404
1442
1481
1521
0.6
Bhp
0.93
1.04
1.16
1.29
1.43
1.57
1.73
1.89
2.07
2.26
2.47
2.69
2.93
Watts
859
948
1047
1156
1275
1396
1534
1674
1831
1997
2180
2369
2571
Rpm
1433
1460
1485
1510
1538
1569
1601
—
—
—
—
—
—
1.6
Bhp
1.90
2.03
2.16
2.31
2.46
2.64
2.84
—
—
—
—
—
—
Watts
1638
1796
1910
2041
2171
2326
2459
—
—
—
—
—
—
Rpm
1163
1194
1226
1259
1294
1330
1365
1400
1435
1471
1506
1542
—
0.8
Bhp
1.10
1.21
1.33
1.47
1.62
1.78
1.94
2.12
2.31
2.51
2.72
2.94
—
548F072 (6 TONS)* — STANDARD MOTOR (BELT DRIVE) (cont)
Airflow
(Cfm)
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
Rpm
1235
1266
1297
1327
1359
1392
1426
1461
1497
1532
—
—
—
1.0
Bhp
1.29
1.40
1.53
1.66
1.81
1.97
2.15
2.34
2.54
2.75
—
—
—
Watts
1156
1250
1361
1473
1604
1744
1901
2067
2240
2420
—
—
—
Rpm
1303
1330
1362
1393
1423
1454
1485
1518
1552
—
—
—
—
External Static Pressure (in. wg)
1.2
1.4
Bhp
Watts
Rpm
Bhp
1.48
1318
1371
1.69
1.59
1413
1396
1.81
1.73
1534
1422
1.94
1.87
1656
1452
2.08
2.02
1779
1483
2.24
2.18
1927
1515
2.41
1544
2.59
2.36
2084
2.55
2249
1575
2.78
2.76
2428
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
Watts
1499
1604
1718
1840
1980
2128
2283
2445
—
—
—
—
—
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum usable watts input is 2120 and maximum continuous bhp is 2.40.
*Motor drive range: 1070 to 1460 rpm. All other rpms require field-supplied drive.
Refer to page 51 for general Fan Performance notes.
35
Watts
998
1089
1190
1310
1439
1578
1718
1875
2041
2214
2394
2579
—
50TFQ004-012
548F036-120
FAN PERFORMANCE — VERTICAL DISCHARGE UNITS (cont)
50TFQ004-012
548F036-120
PERFORMANCE DATA (cont)
FAN PERFORMANCE — VERTICAL DISCHARGE UNITS (cont)
548F072 (6 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)*
External Static Pressure (in. wg)
0.6
Watts
Rpm
Bhp
Watts
Rpm
771
1147
0.97
891
1248
843
1175
1.11
1006
1266
1303
924
1218
1.23
1106
1340
1056
1261
1.35
1207
1310
1.52
1353
1375
1148
1358
1.69
1499
1410
1233
1392
1.81
1604
1460
1378
1517
1427
1.94
1718
1518
1604
1458
2.06
1823
1562
1691
1490
2.19
1936
1602
1840
1543
2.43
2145
1642
1753
1989
1585
2.65
2335
1767
2223
1598
2.73
2444
0.8
Bhp
1.20
1.29
1.41
1.53
1.63
1.72
1.90
2.16
2.42
2.64
2.86
3.58
3.69
Watts
1081
1158
1258
1361
1447
1526
1683
1910
2136
2326
2512
3262
3360
Rpm
1322
1356
1397
1428
1459
1488
1532
1575
1620
1666
1775
—
—
1.0
Bhp
1.33
1.47
1.52
1.66
1.80
1.93
2.14
2.35
2.59
2.85
3.62
—
—
Watts
1190
1310
1353
1473
1595
1709
1892
2076
2283
2504
3290
—
—
548F072 (6 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)* (cont)
External Static Pressure (in. wg)
Airflow
0.2
0.4
0.6
(Cfm)
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
1395
1.46
1301
1475
1.56
1387
1542
1.71
1517
1607
1800
1430
1.58
1404
1504
1.69
1499
1556
1.82
1613
1621
1900
1459
1.67
1482
1532
1.82
1613
1588
1.97
1744
1655
2000
1489
1.80
1595
1567
1.99
1761
1626
2.16
1910
2100
1694
1528
1.95
1726
1603
2.17
1919
1666
2.37
2093
2200
1736
1561
2.13
1884
1637
2.35
2076
2300
1710
2.54
2272
1782
1584
2.28
2015
1671
2.55
2249
—
2400
1756
2.70
2467
1779
3.13
2848
—
1633
2.53
2232
2500
1698
2.72
2405
1768
3.26
2964
—
—
—
—
1675
2.77
2436
2600
1775
3.45
3141
—
—
—
—
—
—
—
2700
—
—
—
—
—
—
—
—
—
—
2800
—
—
—
—
—
—
—
—
—
—
2900
—
—
—
—
—
—
—
—
—
—
3000
0.8
Bhp
1.94
2.06
2.23
2.44
2.68
2.87
—
—
—
—
—
—
—
Watts
1761
1874
2029
2224
2441
2616
—
—
—
—
—
—
—
Rpm
1667
1682
1717
1758
—
—
—
—
—
—
—
—
—
1.0
Bhp
2.16
2.30
2.49
2.73
—
—
—
—
—
—
—
—
—
Watts
1967
2093
2266
2485
—
—
—
—
—
—
—
—
—
Airflow
(Cfm)
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
Rpm
978
1023
1068
1115
1159
1202
1237
1272
1320
1361
1402
1446
1489
0.2
Bhp
0.66
0.78
0.90
1.00
1.15
1.29
1.41
1.53
1.68
1.82
1.95
2.16
2.36
Watts
700
779
867
998
1081
1140
1224
1335
1482
1595
1639
1814
2032
Rpm
1063
1097
1132
1180
1214
1248
1292
1335
1368
1400
1439
1477
1529
0.4
Bhp
0.82
0.91
1.01
1.17
1.28
1.38
1.55
1.71
1.81
1.91
2.08
2.16
2.52
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 2.9 and the maximum continuous
watts are 2562.
*Motor drive range: 1300 to 1685 rpm. All other rpms require fieldsupplied drive.
Refer to page 51 for general Fan Performance notes.
36
PERFORMANCE DATA (cont)
548F090 (71/2 TONS)* — STANDARD MOTOR AND DRIVE AND ALTERNATE DRIVE (BELT DRIVE)
External Static Pressure (in. wg)
Airflow
0.2
0.4
0.6
0.8
(Cfm)
Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts Rpm
708 659 0.95
875 722 1.19 1072 778
2250
511 0.52
539 592 0.74
731 665 0.98
899 727 1.22 1097 783
2300
518 0.55
562 599 0.77
787 677 1.06
965 738 1.30 1165 794
2400
534 0.61
607 613 0.84
835 690 1.14 1031 750 1.38 1233 805
2500
549 0.67
653 627 0.90
867 697 1.18 1064 756 1.42 1267 811
2550
557 0.71
684 633 0.94
891 703 1.22 1097 761 1.46 1301 816
2600
565 0.74
708 639 0.97
948 717 1.31 1173 773 1.55 1378 827
2700
581 0.81
763 652 1.04
597 0.89
827 665 1.12 1014 733 1.40 1250 786 1.66 1473 839
2800
613 0.97
891 679 1.20 1081 745 1.50 1335 799 1.76 1560 850
2900
629 1.06
965 694 1.29 1156 759 1.59 1413 812 1.88 1665 862
3000
646 1.15 1039 709 1.39 1241 772 1.70 1508 825 1.99 1761 875
3100
662 1.25 1123 724 1.50 1335 785 1.80 1595 840 2.11 1866 887
3200
679 1.35 1207 740 1.61 1430 798 1.91 1691 854 2.24 1980 900
3300
696 1.46 1301 756 1.73 1534 811 2.02 1788 868 2.37 2093 914
3400
712 1.57 1396 771 1.85 1639 824 2.14 1892 881 2.50 2206 928
3500
729 1.69 1499 787 1.98 1753 839 2.21 2006 894 2.64 2326 942
3600
746 1.85 1613 803 2.12 1875 854 2.42 2136 907 2.78 2445 956
3700
755 1.89 1674 811 2.20 1945 862 2.49 2197 914 2.85 2504 963
3750
1.0
Bhp
1.43
1.47
1.55
1.64
1.69
1.74
1.83
1.93
2.04
2.15
2.28
2.41
2.54
2.69
2.84
2.99
3.15
3.23
Watts Rpm
1275 829
1310 834
1378 844
1456 855
1499 861
1543 866
1621 878
1709 889
1805 900
1901 911
2015 923
2128 934
2240 946
2369 959
2495 971
2620 984
2751 997
2815
—
1.2
Bhp
1.68
1.72
1.81
1.91
1.96
2.01
2.12
2.23
2.34
2.46
2.58
2.71
2.85
3.00
3.16
3.22
3.49
—
Watts
1491
1526
1604
1691
1735
1779
1875
1971
2067
2171
2275
2386
2504
2629
2759
2886
3017
—
548F090 (71/2 TONS)* — STANDARD MOTOR AND DRIVE AND ALTERNATE DRIVE (BELT DRIVE) (cont)
External Static Pressure (in. wg)
Airflow
1.4
1.6
1.8
2.0
(Cfm)
Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts
884 1.97
1744
947 2.66
2343 1022 3.10
2710
2250
937 2.33
2058
979 2.69
2369 1025 3.12
2727
885 2.00
1770
2300
939 2.36
2084
987 2.76
2428 1039 3.20
2791
892 2.08
1840
2400
944 2.40
2119
949 2.48
2188 1002 2.84
2495 1041 3.25
2831
902 2.18
1927
2500
953 2.53
2232 1003 2.87
2521 1045 3.28
2854
908 2.24
1980
2550
957 2.58
2275 1004 2.91
2554 1050 3.31
2878
913 2.29
2023
2600
967 2.70
2377 1010 3.01
2637 1056 3.37
2925
924 2.40
2120
2700
935 2.52
2223
978 2.62
2479 1019 3.13
2735 1061 3.47
3002
2800
946 2.65
2335
989 2.96
2595 1030 3.27
2847
—
—
—
2900
957 2.78
2445 1000 3.09
2702 1040 3.41
2956
—
—
—
3000
968 2.91
2554 1011 3.24
2832
—
—
—
—
—
—
3100
980 3.04
2661 1022 3.38
2933
—
—
—
—
—
—
3200
991 3.18
2775
—
—
—
—
—
—
—
—
—
3300
1003 3.32
2886
—
—
—
—
—
—
—
—
—
3400
1014 3.48
3009
—
—
—
—
—
—
—
—
—
3500
—
—
—
—
—
—
—
—
—
—
—
—
3600
—
—
—
—
—
—
—
—
—
—
—
—
3700
—
—
—
—
—
—
—
—
—
—
—
—
3750
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum usable watts input is 2120 and maximum continuous
bhp is 2.40.
*Standard motor drive range: 590 to 840 rpm. Alternate motor drive
range: 685 to 935 rpm. All other rpms require field-supplied drive.
Refer to page 51 for general Fan Performance notes.
37
50TFQ004-012
548F036-120
FAN PERFORMANCE — VERTICAL DISCHARGE UNITS (cont)
50TFQ004-012
548F036-120
PERFORMANCE DATA (cont)
FAN PERFORMANCE — VERTICAL DISCHARGE UNITS (cont)
548F090 (71/2 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)*
External Static Pressure (in. wg)
0.6
Watts
Rpm
Bhp
Watts
Rpm
723
662
0.99
907
724
747
668
1.02
932
730
795
680
1.09
989
741
859
693
1.17
1056
753
891
700
1.21
1089
759
916
706
1.25
1123
764
981
719
1.34
1199
776
1056
732
1.43
1275
789
1123
745
1.53
1361
802
1207
759
1.63
1147
815
1292
773
1.74
1543
828
1378
787
1.86
1648
841
1473
801
1.98
1753
854
867
1578
816
2.10
1868
881
1683
830
2.23
1971
895
1796
845
2.37
2093
860
2.52
2223
909
1919
868
2.59
2283
917
1980
0.8
Bhp
1.22
1.26
1.34
1.43
1.48
1.52
1.61
1.71
1.81
1.92
2.04
2.16
2.29
2.42
2.56
2.71
2.87
2.95
Watts
1097
1131
1199
1275
1318
1353
1430
1617
1604
1700
1805
1910
2023
2136
2257
2386
2521
2587
Rpm
781
786
796
808
814
819
831
842
854
866
878
891
904
917
930
943
956
963
1.0
Bhp
1.48
1.50
1.59
1.69
1.74
1.79
1.89
2.00
2.11
2.23
2.35
2.48
2.61
2.75
2.90
3.05
3.22
3.30
Watts
1318
1335
1413
1499
1543
1587
1674
1770
1866
1971
2076
2188
2300
2420
2546
2670
2807
2870
548F090 (71/2 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)* (cont)
External Static Pressure (in. wg)
Airflow
1.2
1.4
1.6
(Cfm)
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
902
2.25
1989
939
2.60
2292
979
2250
841
1.81
1604
905
2.28
2015
943
2.52
2309
983
2300
843
1.83
1621
910
2.31
2041
952
2.74
2411
992
2400
848
1.88
1665
912
2.31
2050
963
2.81
2470
1004
2500
859
1.96
1735
864
2.01
1779
915
2.34
2067
968
2.81
2479
1009
2550
869
2.06
1823
918
2.37
2093
973
2.81
2487
1014
2600
880
2.17
1919
927
2.47
2180
976
2.84
2495
1017
2700
892
2.29
2023
938
2.58
2275
983
2.92
2562
1024
2800
903
2.42
2136
949
2.71
2386
993
3.03
2653
1035
2900
915
2.54
2240
961
2.85
2504
1003
3.17
2767
1045
3000
1058
926
2.67
2352
972
3.00
2629
1015
3.32
2886
3100
1069
938
2.81
2470
983
3.14
2743
1026
3.47
3002
3200
1043
3.80
3341
—
950
2.95
2587
995
3.30
2870
3300
1055
3.97
3493
—
963
3.10
2710
1007
3.45
2987
3400
1030
3.82
3362
—
—
—
—
976
3.25
2831
3500
1043
4.01
3528
—
—
—
—
988
3.41
2956
3600
1019
3.90
3431
—
—
—
—
—
—
—
3700
1026
4.00
3517
—
—
—
—
—
—
—
3750
1.8
Bhp
2.94
2.96
3.10
3.18
3.18
3.18
3.21
3.30
3.43
3.59
3.76
3.93
—
—
—
—
—
—
Watts
2589
2609
2729
2798
2798
2798
2828
2908
3017
3157
3306
3456
—
—
—
—
—
—
Rpm
1015
1020
1029
1041
1047
1052
1055
1063
1074
1084
1097
—
—
—
—
—
—
—
2.0
Bhp
3.29
3.31
3.46
3.55
3.55
3.55
3.59
3.69
3.83
4.01
4.20
—
—
—
—
—
—
—
Watts
2892
2914
3048
3126
3126
3126
3159
3248
3370
3526
3693
—
—
—
—
—
—
—
Airflow
(Cfm)
2250
2300
2400
2500
2550
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3750
Rpm
514
521
536
551
559
567
582
598
614
630
646
662
679
695
712
729
745
754
0.2
Bhp
0.55
0.57
0.63
0.69
0.72
0.75
0.83
0.90
0.98
1.07
1.16
1.28
1.36
1.47
1.59
1.71
1.84
1.91
Watts
562
577
623
669
692
716
779
835
899
973
1047
1131
1216
1310
1413
1617
1630
1691
Rpm
593
600
613
626
634
641
655
670
684
699
714
729
744
759
774
790
805
813
0.4
Bhp
0.76
0.79
0.85
0.93
0.97
1.00
1.08
1.17
1.25
1.35
1.45
1.55
1.66
1.78
1.90
2.03
2.17
2.24
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 3.7 and the maximum continuous
watts are 3313.
*Motor drive range: 860 to 1080 rpm. All other rpms require fieldsupplied drive.
Refer to page 51 for general Fan Performance notes.
38
PERFORMANCE DATA (cont)
548F102 (8 TONS)* — STANDARD MOTOR (BELT DRIVE)
Airflow
(Cfm)
2550
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3750
3800
3900
4000
4100
4200
4250
Rpm
557
565
581
597
613
629
646
662
679
696
712
729
746
755
763
780
796
813
830
839
0.2
Bhp
0.71
0.74
0.81
0.89
0.97
1.06
1.15
1.25
1.35
1.46
1.57
1.69
1.82
1.89
1.95
2.09
2.23
2.39
2.55
2.63
Watts
684
708
763
827
891
965
1039
1123
1207
1301
1396
1499
1613
1674
1726
1849
1971
2110
2249
2317
Rpm
633
639
652
665
679
694
709
724
740
756
771
787
803
811
819
835
851
867
883
892
0.4
Bhp
0.94
0.97
1.04
1.12
1.20
1.29
1.39
1.50
1.61
1.73
1.85
1.98
2.12
2.20
2.27
2.42
2.56
2.74
2.91
3.00
External Static Pressure (in. wg)
0.6
0.8
Watts Rpm Bhp Watts Rpm Bhp Watts
697
1.18 1064
756
1.42 1267
867
703
1.22 1097
761
1.46 1301
891
717
1.31 1173
773
1.55 1378
948
733
1.40 1250
786
1.66 1473
1014
745
1.50 1335
799
1.76 1560
1081
1156
759
1.59 1413
812
1.88 1665
1241
772
1.70 1508
825
1.99 1761
1335
785
1.80 1595
840
2.11 1866
1430
798
1.91 1691
854
2.24 1980
1534
811
2.02 1788
868
2.37 2093
881
2.50 2206
1639
824
2.14 1892
894
2.64 2326
1753
839
2.27 2006
854
2.42 2136
907
2.78 2445
1875
862
2.49 2197
914
2.85 2504
1945
869
2.56 2257
920
2.92 2562
2006
2136
884
2.72 2394
933
3.07 2686
2257
900
2.89 2537
946
3.23 2815
2411
915
3.06 2678
960
3.40 2948
2554
931
3.24 2823
—
—
—
2629
939
3.34 2902
—
—
—
548F102 (8 TONS)* — STANDARD MOTOR (BELT DRIVE) (cont)
External Static Pressure (in. wg)
Airflow
1.4
1.6
1.8
(Cfm)
Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts
908 2.24 1980
953 2.53 2232 1003 2.87 2521
2550
957 2.58 2275 1004 2.91 2554
913 2.29 2023
2600
967 2.70 2377 1010 3.01 2637
924 2.40 2120
2700
935 2.52 2223
978 2.62 2479 1019 3.13 2735
2800
946 2.65 2335
989 2.96 2595 1030 3.27 2847
2900
957 2.78 2445 1000 3.09 2702 1040 3.41 2956
3000
968 2.91 2554 1011 3.24 2832
—
—
—
3100
980 3.04 2661 1022 3.38 2933
—
—
—
3200
991 3.18 2775
—
—
—
—
—
—
3300
1003 3.52 2886
—
—
—
—
—
—
3400
1014 3.48 3009
—
—
—
—
—
—
3500
—
—
—
—
—
—
—
—
—
3600
—
—
—
—
—
—
—
—
—
3700
—
—
—
—
—
—
—
—
—
3750
—
—
—
—
—
—
—
—
—
3800
—
—
—
—
—
—
—
—
—
3900
—
—
—
—
—
—
—
—
—
4000
—
—
—
—
—
—
—
—
—
4100
—
—
—
—
—
—
—
—
—
4200
—
—
—
—
—
—
—
—
—
4250
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
Rpm
1045
1050
1056
1061
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2.0
Bhp
3.28
3.31
3.37
3.41
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Rpm
811
816
827
839
850
862
875
887
900
914
928
942
956
963
970
983
—
—
—
—
1.0
Bhp
1.69
1.74
1.83
1.93
2.04
2.15
2.28
2.41
2.54
2.69
2.84
2.99
3.15
3.23
3.31
3.48
—
—
—
—
Watts
1499
1543
1621
1709
1805
1901
2015
2128
2240
2369
2495
2620
2751
2815
2878
3009
—
—
—
—
Rpm
861
866
878
889
900
911
923
934
946
959
971
984
997
—
—
—
—
—
—
—
1.2
Bhp
1.96
2.01
2.12
2.23
2.34
2.46
2.58
2.71
2.85
3.00
3.16
3.32
3.49
—
—
—
—
—
—
—
Watts
1735
1779
1875
1971
2067
2171
2275
2386
2504
2629
2759
2886
3017
—
—
—
—
—
—
—
Watts
2854
2878
2925
3002
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum usable watts input is 2120 and maximum continuous
bhp is 2.40.
*Motor drive range: 685 to 935 rpm. All other rpms require fieldsupplied drive.
Refer to page 51 for general Fan Performance notes.
39
50TFQ004-012
548F036-120
FAN PERFORMANCE — VERTICAL DISCHARGE UNITS (cont)
50TFQ004-012
548F036-120
PERFORMANCE DATA (cont)
FAN PERFORMANCE — VERTICAL DISCHARGE UNITS (cont)
548F102 (81/2 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)*
External Static Pressure (in. wg)
Airflow
0.2
0.4
0.6
(Cfm)
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
2550
559
0.72
692
634
0.97
891
700
1.21
1089
759
2600
567
0.76
716
641
1.00
916
706
1.25
1123
764
2700
582
0.83
779
655
1.08
981
719
1.34
1199
776
2800
598
0.90
835
670
1.17
1056
732
1.43
1275
789
2900
614
0.98
899
684
1.25
1123
745
1.53
1361
802
3000
630
1.07
973
690
1.35
1207
759
1.63
1147
816
3100
646
1.16
1047
714
1.45
1292
773
1.74
1543
828
3200
662
1.26
1131
729
1.55
1378
787
1.86
1648
841
3300
679
1.36
1216
744
1.66
1473
801
1.98
1753
854
867
3400
695
1.47
1310
759
1.78
1578
816
2.10
1958
881
3500
712
1.59
1413
774
1.90
1683
830
2.23
1971
895
3600
729
1.71
1517
790
2.03
1796
845
2.37
2093
909
3700
745
1.84
1630
805
2.17
1919
860
2.52
2223
868
2.59
2283
917
3750
754
1.91
1691
813
2.24
1980
875
2.66
2343
924
3800
762
1.98
1753
821
2.31
2041
890
2.82
2479
938
3900
779
2.12
1875
836
2.46
2171
905
2.98
2612
953
4000
796
2.27
2006
852
2.61
2300
974
868
2.78
2445
920
3.15
2751
4100
813
2.42
2136
990
884
2.95
2587
935
3.33
2894
4200
830
2.59
2283
965
3.88
3412
—
890
3.04
2661
4250
839
2.68
2360
0.8
Bhp
1.48
1.52
1.61
1.71
1.81
1.92
2.04
2.16
2.29
2.42
2.56
2.71
2.87
2.95
3.03
3.19
3.37
3.74
3.96
—
Watts
1318
1353
1430
1517
1604
1700
1805
1910
2023
2136
2257
2386
2521
2587
2653
2783
2925
3294
3482
—
Rpm
814
819
831
842
854
866
878
891
904
917
930
943
956
963
970
981
996
—
—
—
1.0
Bhp
1.74
1.79
1.89
2.00
2.11
2.23
2.35
2.48
2.61
2.75
2.90
3.05
3.22
3.30
3.38
3.65
3.85
—
—
—
Watts
1543
1587
1674
1770
1866
1971
2076
2188
2300
2420
2546
2670
2807
2870
2933
3209
3390
—
—
—
548F102 (81/2 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)* (cont)
External Static Pressure (in. wg)
Airflow
1.2
1.4
1.6
(Cfm)
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
864
2.01
1779
915
2.34
2067
968
2.81
2479
991
2550
869
2.06
1823
918
2.37
2093
973
2.81
2487
996
2600
880
2.17
1919
927
2.47
2180
976
2.84
2495
999
2700
892
2.29
2023
938
2.58
2275
983
2.92
2562
1006
2800
903
2.42
2136
949
2.71
2386
993
3.03
2653
1017
2900
915
2.54
2240
961
2.85
2504
1003
3.17
2767
1027
3000
926
2.67
2352
972
3.00
2629
1016
3.32
2886
1040
3100
1050
938
2.81
2470
983
3.14
2743
1026
3.47
3002
3200
1046
950
2.95
2587
995
3.30
2870
1022
3.58
3146
3300
1034
3.74
3289
1059
963
3.10
2710
1007
3.45
2987
3400
1034
3.85
3399
1058
976
3.25
2831
1007
3.56
3137
3500
1019
3.74
3292
1047
4.05
3566
—
988
3.41
2956
3600
1023
3.94
3467
—
—
—
—
992
3.59
3161
3700
1030
4.04
3554
—
—
—
—
999
3.68
3240
3750
1006
3.77
3318
1038
4.14
3640
—
—
—
—
3800
1017
4.07
3580
—
—
—
—
—
—
—
3900
—
—
—
—
—
—
—
—
—
—
4000
—
—
—
—
—
—
—
—
—
—
4100
—
—
—
—
—
—
—
—
—
—
4200
—
—
—
—
—
—
—
—
—
—
4250
1.8
Bhp
3.02
3.02
3.05
3.13
3.25
3.40
3.56
3.72
3.84
4.01
4.15
—
—
—
—
—
—
—
—
—
Watts
2654
2654
2682
2758
2862
2994
3136
3277
3377
3530
3648
—
—
—
—
—
—
—
—
—
Rpm
1012
1017
1021
1028
1038
1049
1062
1073
1069
—
—
—
—
—
—
—
—
—
—
—
2.0
Bhp
3.21
3.21
3.25
3.34
3.46
3.62
3.80
3.97
4.09
—
—
—
—
—
—
—
—
—
—
—
Watts
2827
2827
2857
2938
3048
3189
3340
3491
3597
—
—
—
—
—
—
—
—
—
—
—
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 3.7 and the maximum continuous
watts are 3313.
*Motor drive range: 860 to 1080 rpm. All other rpms require fieldsupplied drive.
Refer to page 51 for general Fan Performance notes.
40
PERFORMANCE DATA (cont)
548F120 (10 TONS)*
Airflow
(Cfm
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
Rpm
532
544
557
570
583
596
609
622
635
649
662
675
689
702
715
729
742
756
770
783
797
0.2
Bhp
0.64
0.70
0.75
0.81
0.88
0.94
1.01
1.09
1.16
1.25
1.33
1.42
1.52
1.61
1.72
1.83
1.94
2.06
2.18
2.31
2.44
Watts
630
677
716
763
818
867
924
989
1047
1123
1190
1267
1353
1430
1526
1621
1718
1823
1927
2041
2203
Rpm
605
616
628
639
651
663
674
686
698
713
722
734
746
759
772
785
797
810
823
836
849
0.4
Bhp
0.81
0.86
0.93
0.99
1.06
1.14
1.22
1.30
1.39
1.48
1.57
1.67
1.77
1.88
1.99
2.10
2.22
2.34
2.46
2.60
2.73
Watts
763
803
859
907
965
1031
1097
1165
1241
1318
1396
1482
1569
1665
1761
1858
1962
2067
2221
2344
2460
External Static Pressure (in. wg)
0.6
0.8
Rpm Bhp Watts Rpm Bhp Watts
670
0.97
891
725
1.12 1014
680
1.03
940
735
1.20 1081
690
1.10
998
746
1.28 1148
700
1.18 1064
757
1.36 1216
711
1.25 1123
767
1.44 1284
721
1.33 1190
777
1.52 1353
732
1.42 1267
787
1.61 1430
744
1.50 1335
797
1.70 1508
755
1.59 1413
808
1.80 1595
767
1.68 1491
818
1.90 1683
778
1.78 1578
829
2.01 1779
790
1.89 1674
839
2.12 1875
801
1.99 1761
851
2.23 1971
813
2.11 1866
862
2.34 2067
825
2.22 1962
873
2.46 2221
837
2.35 2076
885
2.59 2335
848
2.48 2238
896
2.72 2451
860
2.61 2353
908
2.86 2578
872
2.75 2505
919
3.00 2707
884
2.89 2605
931
3.14 2838
897
3.04 2661
943
3.30 2870
Rpm
778
787
796
805
815
826
836
847
857
867
878
888
898
908
919
929
940
951
963
974
984
1.0
Bhp
1.28
1.36
1.44
1.52
1.61
1.71
1.80
1.91
2.01
2.11
2.22
2.33
2.45
2.58
2.71
2.85
2.98
3.12
3.27
3.41
3.44
Watts
1148
1216
1284
1353
1430
1517
1595
1691
1779
1866
1962
2058
2212
2326
2442
2569
2688
2727
2847
2956
3211
Rpm
825
835
844
854
863
871
880
890
901
912
922
933
943
953
963
973
984
994
1003
1013
1023
1.2
Bhp
1.43
1.52
1.61
1.70
1.79
1.88
1.98
2.09
2.20
2.32
2.44
2.56
2.69
2.81
2.94
3.08
3.22
3.38
3.43
3.59
3.75
Watts
1275
1353
1430
1508
1587
1665
1753
1849
1945
2050
2203
2309
2424
2533
2651
2782
2914
3068
3202
3349
3501
548F120 (10 TONS)* (cont)
Airflow
(Cfm)
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
Rpm
874
880
888
897
907
916
926
934
943
952
962
973
983
994
1004
1015
1025
1037
1048
1060
1072
1.4
Bhp
1.60
1.68
1.77
1.86
1.97
2.07
2.18
2.28
2.41
2.51
2.63
2.77
2.91
3.05
3.19
3.33
3.48
3.58
3.75
3.92
4.11
Watts
1422
1491
1569
1648
1744
1831
1927
2015
2160
2265
2371
2496
2624
2754
2885
2020
3166
3335
3494
3659
3830
External Static Pressure (in. wg)
1.6
1.8
Rpm Bhp Watts Rpm Bhp Watts
926 1.82 1613
974 2.11 1920
933 1.87 1656
983 2.16 1963
934 1.94 1718
988 2.18 1980
940 2.03 1853
989 2.24 2031
947 2.14 1946
991 2.32 2099
956 2.25 2039
997 2.43 2195
966 2.41 2134 1004 2.54 2291
976 2.48 2238 1013 2.66 2397
985 2.60 2334 1023 2.79 2514
994 2.72 2451 1032 2.92 2633
1003 2.84 2560 1042 3.06 2763
1011 2.97 2679 1051 3.20 2895
1021 3.11 2810 1060 3.34 3029
1031 3.25 2943 1068 3.48 3166
1042 3.41 3097 1080 3.63 3388
1051 3.45 3218 1090 3.75 3493
1060 3.61 3369 1100 3.92 3655
1070 3.84 3325 1111 4.10 3822
1080 3.95 3686 1121 4.28 3995
1089 4.13 3854 1132 4.48 4174
1099 4.32 4027 1144 4.67 4359
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
Rpm
1012
1017
1025
1032
1038
1043
1045
1051
1059
1068
1078
1087
1090
1097
1105
1112
1119
1126
1133
1140
—
2.0
Bhp
2.41
2.44
2.47
2.53
2.57
2.64
2.74
2.85
2.98
3.12
3.26
3.41
3.51
3.70
3.91
4.12
4.35
4.59
4.85
5.12
—
Watts
2134
2177
2230
2282
2318
2380
2478
2569
2688
2819
2952
3097
3276
3453
3642
3843
4057
4284
4523
4775
—
NOTES:
1. Boldface indicates high-static motor and drive are required.
2. Maximum usable watts input is 2120 with standard motor,
2615 with alternate motor, and 4400 for the high-static motor. Maximum continuous bhp is 2.40 with standard motor, 2.90 with alternate motor, and 5.25 for the high-static motor.
*Standard motor drive range: 685 to 935 rpm. Alternate motor drive
range: 835 to 1085 rpm. High-static motor drive range is 830 to
1130 rpm. All other rpms require field-supplied drive.
Refer to page 51 for general Fan Performance notes.
41
50TFQ004-012
548F036-120
FAN PERFORMANCE — VERTICAL DISCHARGE UNITS (cont)
50TFQ004-012
548F036-120
PERFORMANCE DATA (cont)
FAN PERFORMANCE — HORIZONTAL DISCHARGE UNITS
548F036 (3 TONS) — STANDARD MOTOR (DIRECT DRIVE)
Low Speed
Airflow
208 v
230, 460, 575 v
(Cfm)
ESP
Bhp
Watts
ESP
Bhp
0.72
0.21
253
0.75
0.23
900
0.67
0.23
270
0.69
0.25
1000
0.61
0.24
287
0.63
0.26
1100
0.57
0.26
304
0.58
0.27
1200
0.51
0.27
321
0.53
0.29
1300
0.44
0.29
338
0.46
0.30
1400
0.39
0.30
355
0.41
0.31
1500
Bhp
ESP
Watts
High Speed
Watts
277
292
307
323
338
354
369
LEGEND
— Brake Horsepower Input to Fan
— External Static Pressure (in. wg)
— Input Watts to Motor
ESP
0.73
0.70
0.64
0.56
0.53
0.47
0.43
208 v
Bhp
0.26
0.27
0.28
0.29
0.31
0.32
0.33
Watts
307
321
335
349
364
378
392
230, 460, 575 v
Bhp
0.31
0.32
0.33
0.34
0.34
—
—
ESP
0.76
0.71
0.65
0.59
0.54
—
—
Watts
363
374
385
397
408
—
—
Refer to page 51 for general Fan Performance notes.
548F036 (3 TONS) — ALTERNATE MOTOR (BELT DRIVE)*
Airflow
(Cfm)
900
1000
1100
1200
1300
1400
1500
Rpm
526
570
614
658
703
725
755
0.1
Bhp
0.06
0.09
0.13
0.16
0.20
0.29
0.33
Watts
70
109
149
189
239
288
328
Rpm
584
627
670
710
752
776
816
0.2
Bhp
0.08
0.13
0.16
0.23
0.27
0.31
0.38
Watts
99
149
189
229
269
308
378
Rpm
656
738
758
780
808
845
870
External Static Pressure (in. wg)
0.3
0.4
Bhp
Watts
Rpm
Bhp
Watts
0.12
139
734
0.22
219
800
0.26
259
0.19
189
812
0.29
288
0.23
229
0.28
279
840
0.32
318
0.32
318
868
0.37
368
0.38
378
891
0.42
418
0.43
428
924
0.48
477
Rpm
818
848
863
889
916
937
969
0.5
Bhp
0.25
0.29
0.32
0.36
0.41
0.47
0.53
Watts
269
288
308
358
408
467
527
Rpm
875
895
914
938
963
983
1014
0.6
Bhp
0.27
0.31
0.35
0.40
0.45
0.51
0.58
Watts
289
308
348
398
448
507
577
External Static Pressure (in. wg)
0.9
1.0
Bhp
Watts
Rpm
Bhp
Watts
0.38
388
1028
0.42
438
0.44
438
1064
0.48
477
0.49
487
1100
0.52
527
0.53
527
1136
0.59
577
0.61
607
1172
0.65
647
0.67
666
1208
0.70
706
0.70
696
1245
0.74
776
Rpm
1074
1124
1163
1201
1239
1278
1315
1.1
Bhp
0.49
0.54
0.59
0.65
0.72
0.79
0.87
Watts
487
537
587
647
716
786
865
Rpm
1120
1185
1225
1266
1306
1347
1385
1.2
Bhp
0.54
0.60
0.65
0.72
0.79
0.87
0.96
Watts
537
597
647
716
786
865
955
548F036 (3 TONS) — ALTERNATE MOTOR (BELT DRIVE)* (cont)
Airflow
(Cfm)
900
1000
1100
1200
1300
1400
1500
Rpm
924
936
960
960
1012
1027
1056
0.7
Bhp
0.32
0.35
0.39
0.45
0.51
0.56
0.63
Watts
308
348
388
388
507
557
627
Rpm
953
977
1005
1038
1061
1071
1097
0.8
Bhp
0.35
0.39
0.43
0.50
0.56
0.60
0.68
Watts
348
388
428
497
557
597
676
Rpm
989
1020
1052
1076
1090
1108
1117
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
*Motor drive range: 760 to 1000 rpm. All other rpms require field-supplied drive.
Refer to page 51 for general Fan Performance notes.
NOTES:
1. Boldface indicates field-supplied drive is required.
2. Maximum usable watts input is 1000 and maximum continuous bhp is 1.00.
548F036 (3 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)*
Airflow
(Cfm)
900
1000
1100
1200
1300
1400
1500
Rpm
584
627
670
710
752
776
816
0.2
Bhp
0.08
0.13
0.16
0.23
0.27
0.31
0.38
Watts
99
149
189
229
269
308
378
Rpm
734
800
812
840
868
891
924
0.4
Bhp
0.22
0.26
0.29
0.32
0.37
0.42
0.48
External Static Pressure (in. wg)
0.6
Watts
Rpm
Bhp
Watts
Rpm
219
875
0.27
269
953
259
895
0.31
308
977
288
914
0.35
348
1005
318
938
0.40
398
1038
368
963
0.45
448
1061
418
983
0.51
507
1071
1097
477
1014
0.58
577
0.8
Bhp
0.35
0.39
0.43
0.50
0.56
0.60
0.68
Watts
348
388
428
497
557
597
676
Rpm
1028
1064
1100
1136
1172
1208
1245
1.0
Bhp
0.42
0.48
0.52
0.59
0.65
0.70
0.74
Watts
438
477
527
577
647
706
776
1.8
Bhp
0.69
0.77
0.83
0.92
1.01
1.11
1.22
Watts
685
761
825
914
1003
1104
1218
Rpm
1240
1312
1357
1402
1446
1492
1534
2.0
Bhp
0.73
0.82
0.88
0.98
1.07
1.18
1.30
Watts
730
811
879
973
1068
1176
1298
548F036 (3 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)* (cont)
Airflow
(Cfm)
900
1000
1100
1200
1300
1400
1500
Rpm
1120
1185
1225
1266
1306
1347
1385
1.2
Bhp
0.54
0.60
0.65
0.72
0.79
0.87
0.96
Watts
537
597
647
716
786
865
955
Rpm
1155
1222
1263
1306
1347
1389
1428
1.4
Bhp
0.59
0.66
0.71
0.79
0.87
0.95
1.05
Watts
589
655
709
786
862
950
1048
External Static Pressure (in. wg)
1.6
Rpm
Bhp
Watts
1186
0.64
639
1255
0.71
709
1298
0.77
769
1341
0.86
851
1383
0.94
934
1427
1.03
1029
1467
1.14
1135
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
*Motor drive range: 1075 to 1455 rpm. All other rpms require field-supplied drive.
Refer to page 51 for general Fan Performance notes.
Rpm
1215
1285
1328
1373
1416
1461
1502
NOTES:
1. Boldface indicates field-supplied drive is required.
2. Maximum continuous bhp is 2.4 and the maximum continuous watts are 2120.
42
PERFORMANCE DATA (cont)
548F048 (4 TONS) — STANDARD MOTOR (DIRECT DRIVE)
Low Speed
Airflow
208 v
(Cfm)
ESP
Bhp
Watts
ESP
0.93
0.41
458
0.97
1200
0.86
0.42
471
0.90
1300
0.78
0.45
503
0.84
1400
0.73
0.47
536
0.76
1500
0.67
0.49
557
0.70
1600
0.60
0.52
584
0.63
1700
0.51
0.54
610
0.54
1800
0.40
0.56
629
0.45
1900
0.32
0.58
661
0.33
2000
High Speed
230, 460, 575 v
Bhp
0.45
0.46
0.49
0.52
0.54
0.57
0.60
0.62
0.65
Watts
506
521
556
593
616
646
674
696
731
208 v
Bhp
0.51
0.52
0.54
0.56
0.58
0.60
0.62
0.64
0.66
ESP
1.04
0.96
0.90
0.83
0.75
0.67
0.62
0.54
0.47
Watts
572
589
616
631
654
678
698
720
744
ESP
1.09
1.02
0.96
0.89
0.82
0.74
0.69
0.62
0.54
230, 460, 575 v
Bhp
0.56
0.58
0.60
0.62
0.64
0.66
0.68
0.70
0.73
Watts
632
651
681
698
723
750
772
796
823
Refer to page 51 for general Fan Performance notes.
LEGEND
Bhp
— Brake Horsepower Input to Fan
ESP — External Static Pressure (in. wg)
Watts — Input Watts to Motor
548F048 (4 TONS) — ALTERNATE MOTOR (BELT DRIVE)*
Airflow
(Cfm)
1200
1300
1400
1500
1600
1700
1800
1900
2000
Rpm
514
545
577
609
642
675
709
743
778
0.1
Bhp
0.15
0.18
0.21
0.26
0.30
0.36
0.41
0.48
0.55
Watts
158
189
221
273
315
378
431
504
578
Rpm
590
615
642
670
699
728
759
790
836
0.2
Bhp
0.20
0.23
0.27
0.31
0.36
0.42
0.48
0.55
0.62
Watts
210
242
284
326
378
441
504
578
651
Rpm
657
680
704
729
755
782
810
838
875
0.3
Bhp
0.25
0.29
0.33
0.38
0.43
0.49
0.55
0.62
0.70
External Static Pressure (in. wg)
0.4
Watts
Rpm
Bhp
Watts
Rpm
263
723
0.30
315
828
849
305
744
0.35
368
870
347
766
0.39
410
892
394
788
0.44
462
913
447
811
0.49
515
836
0.55
578
935
510
860
0.62
651
957
578
651
886
0.69
725
980
730
913
0.77
809
1004
0.6
Bhp
0.42
0.47
0.52
0.58
0.64
0.71
0.78
0.86
0.94
Watts
441
494
546
609
672
746
820
904
988
Rpm
876
895
915
936
957
979
1001
1023
1046
0.7
Bhp
0.49
0.54
0.59
0.65
0.72
0.79
0.86
0.95
1.03
Watts
510
562
620
683
751
825
904
993
1082
1.6
Bhp
0.75
0.90
1.09
1.30
1.45
1.56
1.67
1.78
1.90
Watts
794
918
1042
1243
1387
1492
1597
1702
1817
Rpm
1138
1193
1244
1289
1337
1366
1385
1402
1419
1.8
Bhp
0.79
0.95
1.12
1.34
1.56
1.73
1.86
1.98
2.10
Watts
851
976
1138
1282
1492
1655
1779
1894
2008
Rpm
924
940
959
980
1001
1023
1044
1066
1088
0.8
Bhp
0.55
0.60
0.66
0.72
0.79
0.86
0.94
1.03
1.12
Watts
578
630
693
757
830
904
988
1082
1177
548F048 (4 TONS) — ALTERNATE MOTOR (BELT DRIVE)* (cont)
Airflow
(Cfm)
1200
1300
1400
1500
1600
1700
1800
1900
2000
Rpm
999
1025
1042
1060
1080
1101
1122
1143
1165
1.0
Bhp
0.66
0.74
0.81
0.88
0.95
1.03
1.11
1.21
1.31
Watts
674
756
828
899
971
1053
1134
1237
1339
Rpm
1018
1058
1080
1098
1117
1137
1157
1179
1200
1.1
Bhp
0.67
0.79
0.88
0.96
1.04
1.12
1.20
1.30
1.40
Watts
685
807
899
981
1058
1139
1226
1328
1431
Rpm
1036
1090
1118
1136
1153
1172
1192
1214
1235
External Static Pressure (in. wg)
1.2
1.4
Bhp
Watts
Rpm
Bhp
0.68
695
1073
0.71
0.84
858
1121
0.87
0.95
971
1175
1.06
1.04
1063
1205
1.19
1.12
1140
1224
1.29
1.20
1226
1241
1.38
1.29
1318
1258
1.48
1.39
1420
1279
1.58
1.49
1523
1300
1.69
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
*Motor drive range: 835 to 1185 rpm. All other rpms require field-supplied drive.
Refer to page 51 for general Fan Performance notes.
Watts
756
832
1014
1138
1234
1320
1415
1511
1616
Rpm
1109
1159
1206
1258
1287
1307
1323
1341
1361
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum usable watts input is 1000 and maximum continuous bhp is 1.00.
548F048 (4 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)*
Airflow
(Cfm)
1200
1300
1400
1500
1600
1700
1800
1900
2000
Rpm
641
673
705
738
772
806
841
876
912
0.2
Bhp
0.23
0.28
0.33
0.38
0.44
0.51
0.59
0.68
0.77
Watts
242
294
347
399
462
536
620
714
809
Rpm
761
788
817
847
877
908
939
971
1004
0.4
Bhp
0.34
0.39
0.45
0.51
0.58
0.66
0.75
0.84
0.94
Watts
357
410
473
536
609
693
788
883
988
External Static Pressure (in. wg)
0.6
Rpm
Bhp
Watts
859
0.46
483
887
0.52
546
914
0.59
620
940
0.65
683
967
0.73
767
997
0.81
851
1026
0.91
956
1056
1.01
1061
1087
1.12
1177
Rpm
943
968
996
1024
1051
1077
1104
1132
1162
0.8
Bhp
0.58
0.65
0.72
0.81
0.89
1.01
1.07
1.18
1.30
Watts
609
683
757
851
935
1030
1124
1240
1366
Rpm
1030
1044
1069
1095
1123
1151
1178
1204
1231
1.0
Bhp
0.70
0.77
0.86
0.95
1.05
1.15
1.26
1.37
1.48
Watts
695
736
838
930
1073
1185
1318
1502
1604
Rpm
1245
1297
1320
1343
1382
1398
1418
1439
1466
1.8
Bhp
1.21
1.35
1.48
1.60
1.68
1.80
1.95
2.11
2.27
Watts
1358
1406
1463
1530
1607
1722
1865
2018
2171
Rpm
1292
1346
1370
1393
1434
1451
1471
1493
—
2.0
Bhp
1.35
1.51
1.65
1.79
1.88
2.01
2.18
2.36
—
Watts
1345
1500
1645
1778
1867
2001
2167
2345
—
548F048 (4 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)* (cont)
Airflow
(Cfm)
1200
1300
1400
1500
1600
1700
1800
1900
2000
Rpm
1106
1128
1139
1162
1185
1215
1243
1271
1298
1.2
Bhp
0.87
0.91
1.01
1.09
1.20
1.31
1.43
1.56
1.69
Watts
889
930
1012
1114
1226
1339
1461
1594
1727
Rpm
1134
1183
1218
1228
1250
1276
1303
1330
1358
1.4
Bhp
0.98
1.10
1.14
1.24
1.35
1.48
1.61
1.74
1.89
Watts
998
1052
1090
1186
1291
1415
1540
1664
1808
External Static Pressure (in. wg)
1.6
Rpm
Bhp
Watts
1189
1.12
1138
1226
1.23
1215
1286
1.34
1282
1303
1.40
1339
1319
1.51
1444
1334
1.64
1569
1359
1.78
1702
1386
1.93
1846
1413
2.08
1989
Refer to page 51 for general Fan Performance notes.
NOTES:
1. Boldface indicates field-supplied drive is required.
2. Maximum continuous bhp is 2.4 and the maximum continuous watts are 2120.
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
*Motor drive range: 1075 to 1455 rpm. All other rpms require field-supplied drive.
43
50TFQ004-012
548F036-120
FAN PERFORMANCE — HORIZONTAL DISCHARGE UNITS (cont)
50TFQ004-012
548F036-120
PERFORMANCE DATA (cont)
FAN PERFORMANCE — HORIZONTAL DISCHARGE UNITS (cont)
548F060 (5 TONS) — STANDARD MOTOR (DIRECT DRIVE)
Low Speed
Airflow
208 v
230, 460, 575 v
(Cfm)
ESP Bhp Watts ESP Bhp Watts ESP
1.01 0.67
750
1.25 0.71
791
1.26
1500
0.82 0.70
780
1.09 0.74
824
1.11
1600
0.64 0.73
810
0.97 0.77
857
0.99
1700
0.44 0.75
839
0.81 0.80
891
0.84
1800
0.32 0.78
869
0.66 0.83
924
0.69
1900
0.21 0.81
899
0.47 0.86
957
0.51
2000
0.13 0.83
929
0.32 0.89
990
0.36
2100
0.05 0.86
959
0.19 0.92 1023
0.21
2200
—
—
—
0.08 0.95 1057
0.08
2300
—
—
—
—
—
—
—
2400
—
—
—
—
—
—
—
2500
208 v
Bhp
0.70
0.74
0.77
0.80
0.83
0.86
0.89
0.92
0.95
—
—
Medium Speed
230, 460, 575 v
Watts ESP Bhp Watts
782
1.46 0.76
845
821
1.32 0.79
883
861
1.22 0.83
921
900
1.09 0.86
959
940
0.96 0.90
997
979
0.80 0.93 1035
1018
0.64 0.96 1073
1058
0.50 1.00 1111
1097
0.34 1.03 1149
—
0.24 1.07 1187
—
0.15 1.10 1225
ESP
1.46
1.33
1.24
1.11
0.99
0.83
0.71
0.58
0.39
0.29
0.15
208 v
Bhp
0.79
0.82
0.85
0.89
0.92
0.95
0.99
1.02
1.06
1.09
1.12
High Speed
230, 460, 575 v
Watts ESP Bhp Watts
875
1.52 0.85
949
913
1.41 0.89
988
950
1.33 0.92 1027
988
1.22 0.96 1066
1025
1.11 0.99 1105
1063
0.97 1.03 1144
1101
0.86 1.06 1183
1138
0.75 1.10 1222
1176
0.57 1.13 1261
1213
0.49 1.17 1300
1251
0.34 1.20 1340
Refer to page 51 for general Fan Performance notes.
LEGEND
Bhp — Brake Horsepower Input to Fan
ESP — External Static Pressure (in. wg)
Watts — Input Watts to Motor
548F060 (5 TONS) — ALTERNATE MOTOR (BELT DRIVE)*
Airflow
(Cfm)
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
Rpm
658
693
729
765
802
840
878
916
954
993
1031
0.1
Bhp
0.27
0.32
0.38
0.45
0.52
0.60
0.69
0.78
0.89
1.00
1.13
Watts
276
327
388
460
531
613
705
797
910
1022
1155
Rpm
722
754
787
821
854
900
923
958
993
1029
1066
0.2
Bhp
0.33
0.38
0.44
0.51
0.58
0.66
0.75
0.85
0.96
1.07
1.20
External Static Pressure (in. wg)
0.4
Watts
Rpm
Bhp
Watts
Rpm
937
337
840
0.46
470
963
388
867
0.52
531
991
450
895
0.58
593
923
0.65
664
1019
521
953
0.73
746
1046
593
984
0.82
838
1073
674
766
1015
0.91
930
1101
869
1046
1.01
1032
1129
981
1079
1.13
1155
1160
1093
1112
1.25
1277
1190
1226
1145
1.39
1420
1220
548F060 (5 TONS) — ALTERNATE MOTOR (BELT DRIVE)* (cont)
External Static Pressure (in. wg)
Airflow
1.0
1.2
1.4
(Cfm)
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
1108
0.90
920
1186
1.08
1104
1263
1.30
1328
1500
1343
1130
0.97
991
1205
1.15
1175
1278
1.35
1380
1600
1350
1154
1.06
1083
1226
1.23
1257
1296
1.42
1451
1700
1364
1178
1.14
1165
1249
1.32
1349
1800
1316
1.52
1553
1382
1201
1.23
1257
1274
1.43
1461
1900
1338
1.62
1656
1402
1226
1.33
1359
1297
1.53
1564
2000
1363
1.73
1768
1424
1252
1.45
1482
2100
1320
1.64
1676
1388
1.80
1891
1448
1280
1.58
1615
2200
1345
1.77
1809
1410
1.97
2013
1473
2300
1309
1.71
1747
1372
1.91
1952
1434
2.11
2156
1496
1519
2400
1336
1.80
1891
1400
2.06
2105
1459
2.26
2310
1486
2.43
2483
1543
2500
1363
2.00
2044
1428
2.22
2269
LEGEND
Bhp — Brake Horsepower Input to Fan
Watts — Input Watts to Motor
0.6
Bhp
0.59
0.65
0.73
0.81
0.90
0.99
1.08
1.19
1.31
1.43
1.57
1.6
Bhp
1.58
1.61
1.64
1.72
1.80
1.94
2.07
2.20
2.34
2.48
2.65
Watts
603
664
746
828
920
1012
1104
1216
1339
1461
1604
Watts
1615
1645
1676
1758
1870
1983
2115
2248
2391
2534
2708
Rpm
1027
1052
1075
1099
1126
1154
1182
1209
1237
1264
1292
Rpm
1431
1424
1432
1447
1464
1484
1505
1529
1554
1578
1600
0.8
Bhp
0.74
0.81
0.88
0.96
1.06
1.16
1.27
1.39
1.51
1.63
1.77
Watts
756
828
899
981
1083
1185
1298
1420
1543
1666
1809
1.8
Bhp
1.79
1.80
1.89
1.95
2.05
2.16
2.29
2.43
2.58
2.76
2.89
Watts
1829
1921
1931
1993
2095
2207
2340
2483
2637
2820
2953
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum usable watts input is 2120 and maximum continuous bhp
is 1.30 for single-phase units and 2.40 for 3-phase units.
*Motor drive range: 900 to 1300 rpm. All other rpms require fieldsupplied drive.
Refer to page 51 for general Fan Performance notes.
44
PERFORMANCE DATA (cont)
548F060 (5 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)*
Airflow
(Cfm)
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
Rpm
789
826
865
905
945
984
1024
1064
1104
1145
1186
0.2
Bhp
0.40
0.46
0.54
0.62
0.72
0.82
0.93
1.05
1.18
1.32
1.48
Watts
420
483
567
661
757
862
977
1103
1240
1387
1555
Rpm
896
931
966
1002
1037
1072
1108
1145
1183
1222
1262
0.4
Bhp
0.53
0.61
0.69
0.78
0.88
0.98
1.10
1.22
1.36
1.45
1.68
Watts
557
641
725
820
925
1030
1156
1282
1429
1524
1765
External Static Pressure (in. wg)
0.6
Rpm
Bhp
Watts
990
0.67
704
1020
0.75
788
1051
0.84
883
1084
0.93
977
1119
1.04
1093
1154
1.16
1219
1192
1.29
1355
1225
1.43
1503
1260
1.57
1650
1296
1.73
1818
1331
1.89
1986
Rpm
1072
1101
1133
1163
1194
1226
1259
1294
1330
1365
1400
0.8
Bhp
0.83
0.91
1.01
1.10
1.21
1.33
1.47
1.62
1.78
1.94
2.12
Watts
872
956
1061
1156
1271
1397
1545
1702
1870
2038
2227
Rpm
1153
1178
1205
1235
1266
1297
1327
1359
1392
1426
1461
1.0
Bhp
1.00
1.09
1.18
1.29
1.40
1.53
1.66
1.80
1.97
2.15
2.34
Watts
1051
1145
1240
1355
1471
1608
1744
1902
2070
2259
2459
2.0
Bhp
1.34
1.77
2.08
2.30
2.47
2.64
2.80
2.98
3.17
3.38
3.61
Watts
1390
1834
2153
2381
2563
2734
2905
3087
3280
3497
3736
548F060 (5 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)* (cont)
Airflow
(Cfm)
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
Bhp
Watts
Rpm
1221
1252
1278
1303
1330
1362
1393
1423
1454
1485
1518
1.2
Bhp
1.17
1.27
1.37
1.48
1.59
1.73
1.87
2.02
2.18
2.36
2.55
Watts
1229
1334
1439
1555
1671
1818
1965
2122
2291
2480
2679
Rpm
1256
1311
1345
1371
1396
1422
1452
1483
1515
1544
1574
1.4
Bhp
1.30
1.45
1.57
1.69
1.80
1.94
2.08
2.24
2.41
2.59
2.78
Watts
1366
1524
1650
1776
1902
2038
2185
2354
2532
2721
2905
External Static Pressure (in. wg)
1.6
Rpm
Bhp
Watts
1283
1.32
1387
1340
1.58
1660
1397
1.76
1849
1433
1.90
1996
1460
2.03
2133
1485
2.16
2270
1510
2.31
2427
1538
2.46
2585
1571
2.64
2758
1604
2.84
2947
1633
3.03
3134
Rpm
1303
1330
1424
1480
1517
1544
1570
1594
1623
1657
1692
1.8
Bhp
1.22
1.61
1.89
2.09
2.25
2.40
2.55
2.71
2.88
3.07
3.28
Watts
1282
1692
1986
2196
2364
2522
2674
2821
2976
3152
3345
Rpm
1345
1373
1470
1528
1566
1594
1620
1645
1675
1710
1746
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 2.9 and the maximum continuous watts are 2562.
LEGEND
— Brake Horsepower Input to Fan
— Input Watts to Motor
*Motor drive range: 1300 to 1685 rpm. All other rpms require field-supplied drive.
Refer to page 51 for general Fan Performance notes.
548F072 (6 TONS) — STANDARD MOTOR (BELT DRIVE)*
Airflow
(Cfm)
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
Rpm
765
802
840
878
916
954
993
1031
1070
1109
1148
1188
1227
0.1
Bhp
0.45
0.45
0.60
0.69
0.78
0.89
1.00
1.13
1.26
1.41
1.57
1.74
1.92
Watts
487
539
600
669
739
827
916
1022
1131
1258
1396
1543
1700
Rpm
821
854
888
923
958
993
1029
1066
1103
1140
1177
1215
1253
0.2
Bhp
0.51
0.58
0.66
0.75
0.85
0.96
1.07
1.20
1.34
1.48
1.64
1.81
2.00
Watts
532
585
646
716
795
883
973
1081
1199
1318
1456
1604
1770
External Static Pressure (in. wg)
0.4
Rpm
Bhp
Watts
923
0.65
638
953
0.73
700
984
0.82
771
1015
0.91
843
1046
1.01
924
1079
1.13
1022
1112
1.25
1123
1145
1.39
1241
1179
1.52
1353
1212
1.67
1482
1246
1.83
1621
1281
2.00
1770
1316
2.19
1936
548F072 (6 TONS) — STANDARD MOTOR (BELT DRIVE)* (cont)
External Static Pressure (in. wg)
Airflow
1.0
1.2
1.4
(Cfm)
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
Bhp
1178
1.14
1031
1249
1.32
1182
1316
1.52
1800
1201
1.23
1106
1274
1.43
1275
1338
1.62
1900
1226
1.33
1990
1297
1.53
1361
1363
1.73
2000
1252
1.45
1292
1320
1.64
1456
1388
1.85
2100
1280
1.58
1404
1345
1.77
1569
1410
1.97
2200
1309
1.71
1517
1372
1.91
1691
1434
2.11
2300
1336
1.85
1639
1400
2.06
1823
1459
2.26
2400
1486
2.43
1363
2.00
1770
1428
2.22
1962
2500
1514
2.61
1390
2.15
1901
1456
2.38
2102
2600
1483
2.56
2257
1543
2.80
1418
2.31
2041
2700
1446
2.48
2188
1510
2.73
2403
—
—
2800
1476
2.67
2352
1537
2.92
2562
—
—
2900
1506
2.88
2529
—
—
—
—
—
3000
Bhp
Watts
LEGEND
— Brake Horsepower Input to Fan
— Input Watts to Motor
Watts
1353
1439
1534
1639
1744
1866
1997
2145
2300
2462
—
—
—
Rpm
1019
1046
1073
1101
1129
1160
1190
1220
1251
1283
1316
1349
1382
Rpm
1382
1402
1424
1448
1473
1496
1519
1543
1569
—
—
—
—
0.6
Bhp
0.81
0.90
0.99
1.08
1.19
1.31
1.43
1.57
1.71
1.87
2.04
2.22
2.42
1.6
Bhp
1.72
1.83
1.94
2.07
2.20
2.34
2.48
2.65
2.83
—
—
—
—
Watts
843
835
907
981
1072
1173
1275
1396
1517
1656
1805
1962
2136
Rpm
1099
1126
1154
1182
1209
1237
1264
1292
1322
1352
1383
1413
1444
0.8
Bhp
0.96
1.06
1.16
1.27
1.39
1.51
1.63
1.77
1.92
2.09
2.26
2.44
2.63
Watts
883
965
1047
1140
1241
1344
1447
1569
1700
1849
1997
2154
2317
Watts
1526
1621
1718
1831
1945
2067
2188
2335
2487
—
—
—
—
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum usable watts input is 2120 and maximum continuous bhp is 2.40.
*Motor drive range: 1070 to 1460 rpm. All other rpms require field-supplied drive.
Refer to page 51 for general Fan Performance notes.
45
50TFQ004-012
548F036-120
FAN PERFORMANCE — HORIZONTAL DISCHARGE UNITS (cont)
50TFQ004-012
548F036-120
PERFORMANCE DATA (cont)
FAN PERFORMANCE — HORIZONTAL DISCHARGE UNITS (cont)
548F072 (6 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)*
External Static Pressure (in. wg)
0.6
Watts
Rpm
Bhp
Watts
Rpm
835
1139
1.05
956
1193
932
1160
1.11
1006
1223
1014
1188
1.22
1097
1254
1064
1196
1.27
1140
1272
1306
1106
1229
1.41
1258
1340
1224
1264
1.56
1387
1305
1.63
1447
1373
1396
1338
1.75
1552
1402
1465
1560
1366
1.96
1735
1435
1726
1403
2.14
1892
1474
1875
1459
2.25
1989
1514
2050
1496
2.54
2240
1529
2119
1534
2.66
2343
1560
0.8
Bhp
1.14
1.24
1.36
1.45
1.53
1.66
1.84
1.99
2.10
2.21
2.42
2.61
2.81
Watts
1031
1114
1216
1292
1361
1473
1630
1761
1858
1954
2136
2300
2470
Rpm
1276
1301
1329
1354
1363
1397
1440
1469
1494
1536
1570
1603
1611
1.0
Bhp
1.30
1.38
1.44
1.58
1.70
1.86
1.95
2.04
2.19
2.46
2.66
2.87
3.01
Watts
1165
1233
1284
1404
1508
1648
1726
1805
1936
2171
2343
2521
2648
548F072 (6 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)* (cont)
External Static Pressure (in. wg)
Airflow
1.2
1.4
1.6
(Cfm)
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
1341
1.40
1250
1413
1.55
1378
1474
1.58
1404
1522
1800
1374
1.53
1361
1437
1.62
1439
1490
1.67
1482
1538
1900
1396
1.66
1473
1460
1.68
1491
1509
1.77
1569
1558
2000
1413
1.75
1552
1475
1.73
1534
1529
1.92
1700
1578
2100
1434
1.81
1604
1487
1.85
1639
1554
2.07
1831
1604
2200
1459
1.88
1665
1520
2.07
1831
1576
2.24
1980
1627
2300
1502
2.06
1823
1552
2.24
1980
1604
2.42
2136
1656
2400
1524
2.24
1980
1585
2.42
2136
1638
2.60
2292
2500
1691
1725
1552
2.40
2119
1616
2.63
2317
1671
2.80
2462
2600
1706
2.97
2653
1761
1584
2.61
2300
1646
2.83
2487
2700
1677
2.99
2661
1739
3.33
2998
1795
1624
2.85
2504
2800
1671
3.03
2725
1742
3.43
3090
—
—
—
—
2900
1692
3.49
3140
1764
3.95
3558
—
—
—
—
3000
1.8
Bhp
1.74
1.84
1.95
2.11
2.28
2.46
2.66
2.86
3.08
3.27
3.67
—
—
Watts
1564
1653
1752
1901
2049
2218
2396
2574
2772
2941
3299
—
—
Rpm
1566
1583
1603
1624
1651
1674
1704
1740
1775
—
—
—
—
2.0
Bhp
1.89
2.00
2.12
2.30
2.48
2.68
2.90
3.12
3.35
—
—
—
—
Watts
1704
1801
1909
2070
2232
2415
2609
2804
3019
—
—
—
—
Airflow
(Cfm)
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
Rpm
942
982
1022
1063
1104
1130
1174
1201
1246
1285
1304
1345
1378
0.2
Bhp
0.73
0.83
0.94
1.10
1.20
1.27
1.37
1.50
1.67
1.80
1.85
2.05
2.30
Watts
700
779
867
998
1081
1140
1224
1335
1482
1595
1639
1814
2032
Rpm
1047
1084
1121
1140
1159
1196
1245
1284
1312
1354
1374
1412
1451
0.4
Bhp
0.90
1.02
1.12
1.18
1.23
1.37
1.57
1.65
1.76
1.95
2.12
2.32
2.40
LEGEND
Bhp — Brake Horsepower Input to Fan
Watts — Input Watts to Motor
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 2.9 and the maximum continuous watts
are 2562.
*Motor drive range: 1300 to 1685 rpm. All other rpms require fieldsupplied drive.
Refer to page 51 for general Fan Performance notes.
46
PERFORMANCE DATA (cont)
548F090 (71/2 TONS) — STANDARD MOTOR AND DRIVE AND ALTERNATE DRIVE (BELT DRIVE)*
External Static Pressure (in. wg)
Airflow
0.2
0.4
0.6
(Cfm)
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
630
0.86
803
695
2250
465
0.43
473
554
0.64
630
635
0.89
827
699
2300
471
0.45
487
559
0.66
646
645
0.95
875
708
2400
482
0.50
524
569
0.71
684
654
1.01
924
717
2500
494
0.54
554
581
0.76
723
659
1.05
956
722
2550
501
0.57
577
587
0.79
747
592
0.82
771
663
1.08
981
727
2660
507
0.59
592
604
0.89
827
672
1.14
1031
737
2700
520
0.65
638
615
0.95
875
683
1.20
1081
747
2800
533
0.71
684
626
1.02
932
693
1.27
1140
756
2900
546
0.77
731
637
1.09
989
704
1.35
1207
765
3000
559
0.83
779
648
1.17
1056
715
1.43
1275
775
3100
572
0.90
835
660
1.24
1114
727
1.52
1353
785
3200
585
0.96
883
598
1.03
940
671
1.32
1182
739
1.62
1439
795
3300
610
1.10
998
682
1.41
1258
750
1.72
1526
806
3400
623
1.17
1056
694
1.50
1335
761
1.82
1613
817
3500
636
1.25
1123
707
1.60
1422
772
1.93
1709
828
3600
649
1.33
1190
720
1.71
1517
783
2.03
1796
840
3700
846
655
1.37
1224
727
1.77
1569
789
2.09
1849
3750
0.8
Bhp
1.09
1.12
1.18
1.25
1.29
1.32
1.40
1.49
1.57
1.66
1.74
1.83
1.91
2.01
2.11
2.23
2.35
2.42
Watts
989
1014
1064
1123
1156
1182
1250
1327
1396
1473
1543
1321
1691
1779
1866
1971
2076
2136
Rpm
757
760
768
776
780
784
793
802
813
823
832
841
851
860
870
880
890
896
1.0
Bhp
1.34
1.37
1.44
1.51
1.55
1.58
1.66
1.75
1.84
1.94
2.05
2.15
2.26
2.36
2.47
2.57
2.69
2.75
Watts
1199
1224
1284
1344
1378
1404
1473
1552
1630
1718
1814
1901
1997
2084
2180
2266
2369
2420
548F090 (71/2 TONS) — STANDARD MOTOR AND DRIVE AND ALTERNATE DRIVE (BELT DRIVE)* (cont)
External Static Pressure (in. wg)
Airflow
1.2
1.4
1.6
1.8
(Cfm)
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
Bhp
810
1.62
1439
850
1.91
1691
873
2.20
1945
883
2.50
2250
903
2.55
816
1.65
1465
859
1.94
1718
888
2.24
1980
2300
931
2.64
824
1.72
1526
872
2.01
1779
909
2.32
2050
2400
955
2.72
832
1.79
1587
882
2.09
1849
925
2.40
2119
2500
931
2.45
2162
964
2.77
836
1.83
1621
887
2.13
1884
2550
936
2.49
2197
973
2.82
839
1.87
1656
891
2.17
1919
2660
946
2.58
2275
987
2.91
846
1.95
1726
898
2.26
1997
2700
954
2.67
2352
997
3.01
855
2.04
1805
906
2.35
2076
2800
913
2.44
2154
961
2.77
2436
1006
3.12
863
2.13
1884
2900
921
2.54
2240
969
2.88
2529
1014
3.22
872
2.22
1962
3000
930
2.65
2335
976
2.99
2620
1021
3.34
882
2.33
2058
3100
892
2.45
2162
939
2.76
2428
984
3.10
2710
—
—
3200
902
2.57
2266
948
2.88
2529
993
3.21
2799
—
—
3300
912
2.69
2369
958
3.01
2637
1002
3.34
2902
—
—
3400
921
2.82
2479
968
3.15
2751
—
—
—
—
—
3500
930
2.95
2587
978
3.29
2862
—
—
—
—
—
3600
940
3.07
2686
—
—
—
—
—
—
—
—
3700
945
3.14
2743
—
—
—
—
—
—
—
—
3750
Watts
2206
2249
2326
2394
2436
2479
2554
2637
2727
2807
2902
—
—
—
—
—
—
—
Rpm
895
911
935
972
986
999
1019
1034
—
—
—
—
—
—
—
—
—
—
2.0
Bhp
2.78
2.85
2.96
3.06
3.11
3.16
3.26
3.36
—
—
—
—
—
—
—
—
—
—
Watts
2445
2504
2595
2678
2718
2759
2839
2917
—
—
—
—
—
—
—
—
—
—
LEGEND
Bhp — Brake Horsepower Input to Fan
Watts — Input Watts to Motor
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates high-static motor and drive are required.
3. Maximum usable watts input is 2120 and maximum continuous bhp
is 2.40.
*Motor drive range: 590 to 840 rpm. Alternate motor drive range: 685 to
935 rpm. All other rpms require field-supplied drive.
Refer to page 51 for general Fan Performance notes.
47
50TFQ004-012
548F036-120
FAN PERFORMANCE — HORIZONTAL DISCHARGE UNITS (cont)
50TFQ004-012
548F036-120
PERFORMANCE DATA (cont)
FAN PERFORMANCE — HORIZONTAL DISCHARGE UNITS (cont)
548F090 (71/2 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)*
External Static Pressure (in. wg)
Airflow
0.2
0.4
0.6
(Cfm)
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
2250
507
0.53
547
586
0.73
700
658
0.97
891
722
2300
513
0.55
562
592
0.76
723
663
1.00
916
727
2400
528
0.60
600
606
0.83
779
674
1.06
965
738
2500
542
0.68
648
619
0.90
835
686
1.13
1022
748
2550
550
0.69
669
627
0.94
867
692
1.17
1056
754
2660
557
0.72
692
634
0.97
891
698
1.21
1089
759
2700
573
0.79
747
648
1.05
956
711
1.29
1156
770
2800
588
0.86
803
662
1.13
1022
723
1.38
1233
782
2900
604
0.94
867
676
1.21
1089
737
1.48
1318
794
3000
620
1.02
932
690
1.30
1165
750
1.58
1404
806
3100
636
1.11
1006
704
1.39
1241
764
1.69
1499
818
3200
652
1.21
1089
718
1.49
1327
778
1.90
1595
831
3300
668
1.31
1173
732
1.59
1413
793
1.92
1700
844
3400
684
1.41
1258
747
1.70
1508
807
2.04
1805
857
871
3500
701
1.53
1361
762
1.82
1613
821
2.16
1010
885
3600
717
1.65
1465
777
1.94
1718
835
2.29
2023
899
3700
733
1.77
1569
792
2.07
1831
849
2.42
2136
907
3750
742
1.84
1630
800
2.14
1892
856
2.49
2197
0.8
Bhp
1.22
1.26
1.34
1.41
1.45
1.49
1.58
1.66
1.76
1.86
1.97
2.09
2.21
2.35
2.48
2.63
2.78
2.86
Watts
1097
1131
1199
1258
1292
1327
1404
1473
1560
1648
1744
1849
1954
2076
2188
2317
2445
2512
Rpm
783
786
795
806
812
816
827
837
849
849
870
882
894
907
919
932
945
952
1.0
Bhp
1.46
1.49
1.58
1.68
1.74
1.79
1.88
1.98
2.08
2.18
2.29
2.40
2.53
2.66
2.80
2.95
3.11
3.20
Watts
1301
1327
1404
1491
1543
1587
1665
1763
1840
1927
2023
2119
2232
2343
2462
2587
2718
2719
548F090 (71/2 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)* (cont)
External Static Pressure (in. wg)
Airflow
1.2
1.4
1.6
(Cfm)
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
908
2.25
1989
955
2.59
2283
991
2250
843
1.81
1604
910
2.25
2015
959
2.61
2300
995
2300
846
1.84
1630
912
2.31
2041
967
2.68
2360
1003
2400
853
1.88
1665
919
2.37
2093
971
2.73
2403
1007
2500
859
1.94
1718
864
1.99
1761
920
2.39
2110
974
2.76
2428
1010
2550
868
2.04
1805
921
2.41
2136
976
2.78
2445
1012
2660
878
2.16
1910
928
2.45
2162
983
2.88
2529
1020
2700
889
2.29
2023
937
2.57
2266
986
2.91
2554
1023
2800
900
2.41
2128
947
2.70
2377
993
3.01
2637
1030
2900
910
2.52
2223
958
2.85
2504
1002
3.15
2751
1039
3000
920
2.64
2326
968
2.99
2620
1012
3.30
2870
1050
3100
1061
931
2.76
2428
979
3.13
2735
1023
3.47
3002
3200
1072
942
2.89
2537
989
3.26
2839
1034
3.63
3121
3300
1044
3.79
3237
—
954
3.02
2645
1000
3.40
2948
3400
1054
3.94
3340
—
966
3.15
2751
1011
3.55
3062
3500
1065
4.10
3445
—
978
3.30
2870
1022
3.69
3165
3600
1034
3.84
3272
—
—
—
—
990
3.45
2987
3700
1040
3.93
3333
—
—
—
—
997
3.54
3055
3750
1.8
Bhp
2.89
2.91
2.99
3.05
3.08
3.10
3.21
3.25
3.36
3.51
3.68
3.87
4.05
—
—
—
—
—
Watts
2543
2563
2631
2681
2710
2730
2828
2857
2955
3093
3240
3407
3564
—
—
—
—
—
Rpm
1023
1028
1036
1041
1044
1046
1053
1057
1064
1074
1084
—
—
—
—
—
—
—
2.0
Bhp
3.19
3.21
3.30
3.36
3.40
3.42
3.54
3.58
3.70
3.88
4.06
—
—
—
—
—
—
—
Watts
2805
2827
2902
2956
2989
3011
3119
3181
3260
3411
3574
—
—
—
—
—
—
—
LEGEND
Bhp — Brake Horsepower Input to Fan
Watts — Input Watts to Motor
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 3.7 and the maximum continuous watts
are 3313.
*Motor drive range: 860 to 1080 rpm. All other rpms require fieldsupplied drive.
Refer to page 51 for general Fan Performance notes.
48
PERFORMANCE DATA (cont)
548F102 (81/2 TONS) — STANDARD MOTOR (BELT DRIVE)*
External Static Pressure (in. wg)
0.6
Watts
Rpm
Bhp
Watts
Rpm
722
747
659
1.05
956
727
771
663
1.08
981
737
827
672
1.14
1031
747
875
683
1.20
1081
693
1.27
1140
756
932
704
1.35
1207
765
989
715
1.43
1275
775
1056
727
1.52
1353
785
1114
739
1.62
1439
795
1182
750
1.72
1526
806
1258
1335
761
1.82
1613
817
1422
772
1.93
1709
828
1517
783
2.03
1796
840
846
1569
789
2.09
1849
852
1613
795
2.15
1901
863
1709
806
2.26
1997
874
1814
817
2.38
2102
828
2.50
2206
885
1919
840
2.64
2326
897
2032
846
2.71
2386
903
2093
0.8
Bhp
1.29
1.32
1.40
1.49
1.57
1.66
1.74
1.83
1.91
2.01
2.11
2.23
2.35
2.42
2.48
2.61
2.75
2.88
3.03
3.10
Watts
1156
1182
1250
1327
1396
1473
1543
1321
1691
1779
1866
1971
2076
2136
2188
2300
2420
2529
2653
2710
Rpm
780
784
793
802
813
823
832
841
851
860
870
880
890
896
901
912
923
935
947
—
1.0
Bhp
1.55
1.58
1.66
1.75
1.84
1.94
2.05
2.15
2.26
2.36
2.47
2.57
2.69
2.75
2.80
2.93
3.08
3.23
3.39
—
Watts
1378
1404
1473
1552
1630
1718
1814
1901
1997
2084
2180
2266
2369
2420
2462
2571
2694
2815
2940
—
548F102 (81/2 TONS) — STANDARD MOTOR (BELT DRIVE)* (cont)
External Static Pressure (in. wg)
Airflow
1.2
1.4
1.6
(Cfm)
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
836
1.83
1621
887
2.13
1884
931
2.45
2162
964
2550
936
2.49
2197
973
839
1.87
1656
891
2.17
1919
2660
946
2.58
2275
987
846
1.95
1726
898
2.26
1997
2700
954
2.67
2352
997
855
2.04
1805
906
2.35
2076
2800
913
2.44
2154
961
2.77
2436
1006
863
2.13
1884
2900
921
2.54
2240
969
2.88
2529
1014
872
2.22
1962
3000
930
2.65
2335
976
2.99
2620
1021
882
2.33
2058
3100
892
2.45
2162
939
2.76
2428
984
3.10
2710
—
3200
902
2.57
2266
948
2.88
2529
993
3.21
2799
—
3300
912
2.69
2369
958
3.01
2637
1002
3.34
2902
—
3400
921
2.82
2479
968
3.15
2751
—
—
—
—
3500
930
2.95
2587
978
3.29
2862
—
—
—
—
3600
940
3.07
2686
—
—
—
—
—
—
—
3700
945
3.14
2743
—
—
—
—
—
—
—
3750
949
3.20
2781
—
—
—
—
—
—
—
3800
959
3.33
2894
—
—
—
—
—
—
—
3900
—
—
—
—
—
—
—
—
—
—
4000
—
—
—
—
—
—
—
—
—
—
4100
—
—
—
—
—
—
—
—
—
—
4200
—
—
—
—
—
—
—
—
—
—
4250
1.8
Bhp
2.77
2.82
2.91
3.01
3.12
3.22
3.34
—
—
—
—
—
—
—
—
—
—
—
—
—
Watts
2436
2479
2554
2637
2727
2807
2902
—
—
—
—
—
—
—
—
—
—
—
—
—
Rpm
986
999
1019
1034
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2.0
Bhp
3.11
3.16
3.26
3.36
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Watts
2718
2759
2839
2917
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Airflow
(Cfm)
2550
2660
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3750
3800
3900
4000
4100
4200
4250
Rpm
501
507
520
533
546
559
572
585
598
610
623
636
649
655
661
674
687
699
712
719
0.2
Bhp
0.57
0.59
0.65
0.71
0.77
0.83
0.90
0.96
1.03
1.10
1.17
1.25
1.33
1.37
1.41
1.49
1.57
1.60
1.75
1.80
Watts
577
592
638
684
731
779
835
883
940
998
1056
1123
1190
1224
1258
1327
1396
1473
1552
1595
Rpm
587
592
604
615
626
637
648
660
671
682
694
707
720
727
733
746
759
772
785
792
0.4
Bhp
0.79
0.82
0.89
0.95
1.02
1.09
1.17
1.24
1.32
1.41
1.50
1.60
1.71
1.77
1.82
1.93
2.05
2.17
2.30
2.37
LEGEND
Bhp — Brake Horsepower Input to Fan
Watts — Input Watts to Motor
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum usable watts input is 2120 and maximum continuous bhp
is 2.40.
*Motor drive range: 685 to 935 rpm. All other rpms require fieldsupplied drive.
Refer to page 51 for general Fan Performance notes.
49
50TFQ004-012
548F036-120
FAN PERFORMANCE — HORIZONTAL DISCHARGE UNITS (cont)
50TFQ004-012
548F036-120
PERFORMANCE DATA (cont)
FAN PERFORMANCE — HORIZONTAL DISCHARGE UNITS (cont)
548F102 (81/2 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)*
External Static Pressure (in. wg)
Airflow
0.2
0.4
0.6
(Cfm)
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
2550
550
0.69
669
627
0.94
867
692
1.17
1056
754
2660
557
0.72
692
634
0.97
891
698
1.21
1089
759
2700
573
0.79
747
648
1.05
956
711
1.29
1156
770
2800
588
0.86
803
662
1.13
1022
723
1.38
1233
782
2900
604
0.94
867
676
1.21
1089
737
1.48
1318
794
3000
620
1.02
932
690
1.30
1165
750
1.58
1404
806
3100
636
1.11
1006
704
1.39
1241
764
1.69
1499
818
3200
652
1.21
1089
718
1.49
1327
778
1.80
1595
831
3300
668
1.31
1173
732
1.59
1413
793
1.92
1700
844
3400
684
1.41
1258
747
1.70
1508
807
2.04
1805
857
871
3500
701
1.53
1361
762
1.82
1613
821
2.16
1910
885
3600
717
1.65
1465
777
1.94
1718
835
2.29
2023
899
3700
733
1.77
1569
792
2.07
1831
849
2.42
2136
907
3750
742
1.84
1630
800
2.14
1892
856
2.49
2197
863
2.56
2257
914
3800
750
1.90
1683
807
2.21
1954
877
2.71
2386
928
3900
767
2.04
1805
822
2.35
2076
891
2.86
2512
942
4000
783
2.18
1927
838
2.50
2206
905
3.02
2645
956
4100
800
2.34
2067
854
2.66
2343
869
2.82
2479
920
3.19
2783
970
4200
817
2.49
2197
877
2.91
2554
928
3.28
2854
977
4250
826
2.58
2275
0.8
Bhp
1.45
1.49
1.58
1.66
1.76
1.86
1.97
2.09
2.21
2.35
2.48
2.63
2.78
2.86
2.93
3.09
3.26
3.43
3.60
3.69
Watts
1292
1327
1404
1473
1560
1648
1744
1849
1954
2076
2188
2317
2445
2512
2571
2702
2839
2971
3099
3165
Rpm
812
816
827
837
848
849
870
882
894
907
919
932
945
952
958
972
986
1000
1015
1022
1.0
Bhp
1.74
1.79
1.88
1.98
2.08
2.18
2.29
2.40
2.53
2.66
2.80
2.95
3.11
3.20
3.28
3.45
3.63
3.81
4.00
4.10
Watts
1543
1587
1665
1753
1840
1927
2023
2119
2232
2343
2462
2587
2718
2719
2854
2987
3121
3251
3380
3445
548F102 (81/2 TONS) — HIGH-STATIC MOTOR (BELT DRIVE)* (cont)
External Static Pressure (in. wg)
Airflow
1.2
1.4
1.6
(Cfm)
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
Bhp
Watts
Rpm
864
1.99
1761
920
2.39
2110
974
2.76
2428
1005
2550
868
2.04
1805
921
2.41
2136
976
2.78
2445
1008
2660
878
2.16
1910
928
2.45
2162
983
2.88
2529
1015
2700
889
2.29
2023
937
2.57
2266
986
2.91
2554
1018
2800
900
2.41
2128
947
2.70
2377
993
3.01
2637
1025
2900
910
2.52
2223
958
2.85
2504
1002
3.15
2751
1034
3000
920
2.64
2326
968
2.99
2620
1012
3.30
2870
1045
3100
1056
931
2.76
2428
979
3.13
2735
1023
3.47
3002
3200
1067
942
2.89
2537
989
3.26
2839
1034
3.63
3121
3300
1044
3.79
3237
1078
954
3.02
2645
1000
3.40
2948
3400
1054
3.94
3340
—
966
3.15
2751
1011
3.55
3062
3500
1065
4.10
3445
—
978
3.30
2870
1022
3.69
3165
3600
1034
3.84
3272
—
—
—
—
990
3.45
2987
3700
1040
3.93
3333
—
—
—
—
997
3.54
3055
3750
1045
4.01
3387
—
—
—
—
1003
3.62
3114
3800
1015
3.80
3244
1057
4.18
3495
—
—
—
—
3900
1028
3.99
3373
—
—
—
—
—
—
—
4000
1042
4.18
3495
—
—
—
—
—
—
—
4100
—
—
—
—
—
—
—
—
—
—
4200
—
—
—
—
—
—
—
—
—
—
4250
1.8
Bhp
3.04
3.06
3.17
3.20
3.31
3.47
3.63
3.82
3.99
4.17
—
—
—
—
—
—
—
—
—
—
Watts
2672
2691
2788
2817
2914
3049
3195
3359
3514
3669
—
—
—
—
—
—
—
—
—
—
Rpm
1034
1037
1044
1047
1055
1064
1075
1087
—
—
—
—
—
—
—
—
—
—
—
—
2.0
Bhp
3.31
3.33
3.45
3.49
3.61
3.77
3.95
4.16
—
—
—
—
—
—
—
—
—
—
—
—
Watts
2910
2931
3036
3068
3174
3321
3479
3659
—
—
—
—
—
—
—
—
—
—
—
—
LEGEND
Bhp — Brake Horsepower Input to Fan
Watts — Input Watts to Motor
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 3.7 and the maximum continuous watts
are 3313.
*Motor drive range: 860 to 1080 rpm. All other rpms require fieldsupplied drive.
Refer to page 51 for general Fan Performance notes.
50
PERFORMANCE DATA (cont)
548F120 (10 TONS)*
Airflow
(Cfm)
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
Rpm
484
495
505
516
527
537
548
560
571
582
593
605
616
628
639
651
662
674
686
698
710
0.2
Bhp
0.55
0.61
0.66
0.72
0.78
0.85
0.92
1.00
1.08
1.16
1.25
1.35
1.45
1.56
1.67
1.78
1.91
2.03
2.17
2.31
2.45
Watts
562
607
646
692
739
795
851
916
981
1047
1123
1207
1292
1387
1482
1578
1691
1796
1919
2041
2212
Rpm
560
570
579
589
599
609
619
629
639
649
659
670
680
690
701
712
722
733
744
755
766
0.4
Bhp
0.70
0.76
0.81
0.87
0.93
0.99
1.05
1.12
1.19
1.27
1.35
1.44
1.53
1.63
1.73
1.84
1.95
2.07
2.20
2.33
2.47
External Static Pressure (in. wg)
0.6
Watts
Rpm
Bhp
Watts
Rpm
690
677
631
0.87
810
699
723
638
0.92
851
708
763
646
0.98
899
717
810
655
1.05
956
724
859
664
1.11
1006
731
907
672
1.18
1064
738
956
680
1.24
1114
688
1.31
1173
747
1014
698
1.39
1241
756
1072
708
1.47
1310
764
1140
717
1.56
1387
773
1207
727
1.65
1465
781
1284
737
1.74
1543
789
1361
1447
747
1.83
1621
798
1534
757
1.92
1700
807
1630
767
2.02
1788
817
1726
777
2.13
1884
827
1831
787
2.24
1980
836
1945
797
2.36
2084
846
2058
808
2.48
2238
856
2230
818
2.61
2353
866
0.8
Bhp
1.03
1.10
1.16
1.23
1.30
1.36
1.43
1.51
1.60
1.69
1.78
1.86
1.95
2.05
2.16
2.27
2.38
2.50
2.62
2.73
2.86
Watts
940
998
1047
1106
1165
1216
1275
1344
1422
1499
1578
1648
1726
1814
1910
2006
2102
2256
2362
2460
2578
Rpm
747
755
761
767
775
784
794
802
810
816
823
832
841
849
858
866
874
882
891
900
910
1.0
Bhp
1.20
1.27
1.34
1.40
1.48
1.56
1.64
1.73
1.81
1.89
1.98
2.08
2.18
2.30
2.41
2.51
2.62
2.73
2.85
2.99
3.12
Watts
1081
1140
1199
1250
1318
1387
1456
1534
1604
1674
1753
1840
1927
2032
2177
2265
2362
2460
2569
2698
2819
Rpm
850
857
862
867
873
880
888
895
901
908
915
924
934
943
951
958
965
972
980
990
998
1.4
Bhp
1.52
1.63
1.71
1.78
1.85
1.94
2.04
2.13
2.23
2.32
2.42
2.54
2.65
2.77
2.89
3.00
3.11
3.23
3.37
3.51
3.62
External Static Pressure (in. wg)
1.6
Watts
Rpm
Bhp
Watts
Rpm
1353
879
1.38
1233
925
1447
896
1.66
1473
935
1517
908
1.85
1639
944
1578
915
1.98
1753
952
1639
920
2.07
1831
963
1718
926
2.15
1901
970
1805
931
2.23
1971
976
1884
938
2.33
2108
981
1971
945
2.44
2203
986
2050
953
2.55
2300
993
2186
960
2.65
2389
1000
1008
2291
966
2.76
2487
1015
2389
972
2.87
2587
980
2.99
2698
1021
2406
990
3.12
2819
1028
2603
2707
999
3.26
2982
1035
2810
1008
3.39
3078
1041
2923
1017
3.45
3224
1048
3058
1025
3.55
3362
1055
3149
1034
3.71
3505
1062
3271
1042
3.85
3654
1068
1.8
Bhp
1.81
1.93
2.01
2.11
2.21
2.41
2.47
2.56
2.65
2.75
2.87
2.99
3.12
3.23
3.36
3.51
3.68
3.80
3.85
3.98
4.08
Watts
1604
1709
1836
1920
2005
2134
2230
2309
2389
2478
2587
2698
2819
2923
3049
3161
3295
3436
3584
3741
3907
Rpm
964
975
984
993
1001
1007
1017
1024
1029
1034
1039
1046
1053
1061
1068
1074
1081
1088
1095
1101
1108
2.0
Bhp
1.92
1.98
2.09
2.22
2.31
2.46
2.62
2.77
2.89
3.00
3.10
3.21
3.34
3.48
3.61
3.74
3.90
4.13
4.30
4.45
4.59
Watts
1761
1811
1903
2014
2091
2221
2362
2496
2605
2707
2800
2904
3029
3166
3241
3346
3450
3552
3653
3753
3851
548F120 (10 TONS)* (cont)
Airflow
(Cfm)
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
Rpm
800
805
812
819
827
833
840
847
856
865
875
883
889
896
903
912
921
930
938
946
954
1.2
Bhp
1.38
1.44
1.51
1.59
1.67
1.75
1.83
1.92
2.02
2.12
2.22
2.32
2.41
2.51
2.62
2.74
2.87
3.00
3.14
3.27
3.39
Watts
1233
1284
1344
1413
1482
1552
1621
1700
1788
1875
1962
2050
2177
2265
2362
2469
2587
2707
2838
2962
3078
LEGEND
Bhp — Brake Horsepower Input to Fan
Watts — Input Watts to Motor
NOTES:
1. Boldface indicates field-supplied drive is required.
2.
indicates high-static motor and drive are required.
3. Maximum usable watts input is 2120 with standard motor, 2615 with
alternate motor, and 4400 for the high-static motor. Maximum
continuous bhp is 2.40 with standard motor, 2.90 with alternate
motor and 5.25 with high-static motor.
*Standard motor drive range: 685 to 935 rpm. Alternate motor drive
range: 835 to 1085 rpm. High static motor drive range: 830 to
1130 rpm. All other rpms require field-supplied drive.
Refer to this page for general Fan Performance notes.
GENERAL NOTES FOR FAN PERFORMANCE TABLES
1. Extensive motor and electrical testing on these units ensures that
2. Values include losses for filters, unit casing, and wet coils. See
the full range of the motor can be utilized with confidence. Using
page 52 for accessory/FIOP (factory-installed option) static presyour fan motors up to the wattage ratings shown will not result in
sure information.
nuisance tripping or premature motor failure. Unit warranty will not
3. Use of a field-supplied motor may affect wire sizing. Contact your
be affected. For additional information on motor performance, refer
Bryant representative for details.
to Indoor-Fan Motor Performance table on page 55.
4. Interpolation is permissible. Do not extrapolate. (Belt drive units
only.)
51
50TFQ004-012
548F036-120
FAN PERFORMANCE — HORIZONTAL DISCHARGE UNITS (cont)
50TFQ004-012
548F036-120
PERFORMANCE DATA (cont)
ACCESSORY/FIOP STATIC PRESSURE* (in. wg) — 548F036-072
CFM
COMPONENT
900
0.05
0.15
1 Heater Module
2 Heater Modules
Durablade Economizer
Accessory
EconoMi$er
1200
0.07
0.16
1400
0.09
0.16
1600
0.09
0.16
1800
0.10
0.17
2000
0.11
0.17
2200
0.11
0.17
2400
0.12
0.18
2600
0.13
0.18
3000
0.15
0.19
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.09
0.13
0.17
0.22
0.27
0.32
0.39
0.45
0.53
LEGEND
FIOP — Factory-Installed Option
*The static pressure must be added to external static pressure. The sum and the evaporator
entering-air cfm should then be used in conjunction with the Fan Performance tables to determine blower rpm and watts.
ACCESSORY/FIOP STATIC PRESSURE* (in. wg) — 548F090-120
CFM
COMPONENT
1 Heater Module
2 Heater Modules
Durablade Economizer
Accessory
EconoMi$er
2250
0.02
0.03
2500
0.03
0.05
3000
0.05
0.07
3500
0.07
0.09
4000
0.08
0.12
4500
0.10
0.14
5000
0.12
0.16
5500
0.14
0.19
6000
0.16
0.21
6250
0.17
0.20
0.02
0.02
0.03
0.04
0.05
0.06
0.07
0.08
0.09
0.09
0.07
0.09
0.13
0.18
0.23
0.30
0.36
—
—
—
LEGEND
FIOP — Factory-Installed Option
*The static pressure must be added to external static pressure. The sum and the evaporator
entering-air cfm should then be used in conjunction with the Fan Performance tables to determine blower rpm and watts.
FAN RPM AT MOTOR PULLEY SETTINGS* — 548F036-120
UNIT
548F
036†
036**
048†
048**
060†
060**
072††
072**
090††
090***
090**
102††
102**
120††
120†
120**
0
1000
1455
1185
1455
1300
1685
1460
1685
840
935
1080
935
1080
935
1085
1130
1/2
976
1423
1150
1423
1260
1589
1420
1589
815
910
1025
910
1025
910
1060
1112
1
952
1392
1115
1392
1220
1557
1380
1557
790
885
1007
885
1007
885
1035
1087
11 / 2
928
1360
1080
1360
1180
1525
1345
1525
765
860
988
860
988
860
1010
1062
2
904
1328
1045
1328
1140
1493
1305
1493
740
835
970
835
970
835
985
1037
MOTOR PULLEY TURNS OPEN
21 / 2
3
31 / 2
880
856
832
1297
1265
1233
1010
975
940
1297
1265
1233
1100
1060
1020
1460
1428
1396
1265
1225
1185
1460
1428
1396
715
690
665
810
785
760
952
933
915
810
785
760
952
933
915
810
785
760
960
935
910
1012
987
962
*Approximate fan rpm shown.
†Indicates alternate motor and drive package.
**Indicates high-static motor and drive package.
††Indicates standard motor and drive package.
***Indicates alternate drive package only.
52
4
808
1202
905
1202
980
1364
1150
1364
635
735
897
735
897
735
885
937
41 / 2
784
1170
870
1170
940
1332
1110
1332
615
710
878
710
878
710
860
912
5
760
1138
835
1138
900
1300
1070
1300
590
685
860
685
860
685
835
887
51 / 2
—
1107
—
1107
—
—
—
—
—
—
—
—
—
—
—
862
6
—
1075
—
1075
—
—
—
—
—
—
—
—
—
—
—
830
PERFORMANCE DATA (cont)
0.25
AMPS @ 230 V
(2 Fans Running)
548F036-072
548F090-120
1.40 Amps @ 60 Hz
3.04 Amps @ 60 Hz
230 VAC
MOCP
460 VAC
575 VAC
15.0 amps
15.0 amps
15.0 amps
STATIC PRESSURE (in. wg)
POWER REQUIREMENTS
UNIT
SIZE
50TFQ004-012
548F036-120
OPTIONAL POWER EXHAUST
MOCP — Maximum Overcurrent Protection
0.20
0.15
0.10
0.05
0.00
0
548F036-072
548F090-120
1000
500
1500
2000
FLOW (CFM)
EconoMi$er Barometric Relief
Damper Characteristics
5000
FLOW (cfm)
FLOW (cfm)
2500
2000
2 FANS
OPERATING
1500
1 FAN
OPERATING
1000
4000
3000
2 FANS
OPERATING
2000
1 FAN
OPERATING
1000
0
500
0
0
0
0.1
0.2
0.3
0.4
0.1
0.2
0.3
0.4
0.5
STATIC PRESSURE (in. wg)
0.5
STATIC PRESSURE (in. wg)
EconoMi$er Power Exhaust Performance
(548F036-072)
EconoMi$er Power Exhaust Performance
(548F090-120)
53
50TFQ004-012
548F036-120
PERFORMANCE DATA (cont)
ELECTRIC HEATING CAPACITIES
UNIT
548F
VOLTAGE
(60 Hz)
208/230
(single phase)
036
208/230
(3 phase)
460
(3 phase)
208/230
(single phase)
048
208/230
(3 phase)
460
(3 phase)
208/230
(single phase)
060
208/230
(3 phase)
460
(3 phase)
ACCESSORY
kW
4.4
6.5
8.7
10.5
13.0*
4.4
6.5
8.7
10.5
16.0
6.0
8.8
11.5
14.0
4.4
8.7
13.0*
17.4*
21.0*
6.5
8.7
16.0
21.0*
6.0
11.5
14.0
23.0*
6.5
8.7
13.0*
17.4*
21.0*
6.5
10.5
16.0
21.0*
26.5*
6.0
11.5
14.0
23.0*
25.5*
ACCESSORY
ACCESSORY
SINGLE
HEATER
POINT BOX
PART NUMBER
PART NO.
CRHEATER---A00 CRSINGLE---A00
101
—
102
—
103
—
104
—
102*
004
101
—
102
—
103
—
104
—
105
—
106
—
107
—
108
—
109
—
101
—
103
—
102*
004
103*
004
104*
004
102
—
103
—
105
—
104*
002
106
—
108
—
109
—
108*
—
102
—
103
—
102*
004
103*
004
104*
004
102
—
104
—
105
—
104*
002
105,104
002
106
—
108
—
109
—
108*
—
109,108
—
UNIT
548F
VOLTAGE
(60 Hz)
208/230
(3 phase)
072
460
(3 phase)
208/230
(3 phase)
090,102
460
(3 phase)
208/230
(3 phase)
120
460
(3 phase)
ACCESSORY
kW
ACCESSORY
HEATER
PART NUMBER
CRHEATER---A00
6.5
10.5
16.0
21.0*
26.5*
6.0
11.5
14.0
23.0*
25.5*
10.4
16.0
24.8
32.0
42.4*
13.9
16.5
27.8
33.0
41.7*
10.4
16.0
32.0
42.4*
50.0*
16.5
27.8
33.0
41.7*
50.0*
102
104
105
104*
105,104
106
108
109
108*
109,108
117
110
111
112
112,117
116
113
114
115
114,116
117
110
112
112,117
112,110
113
114
115
114,116
115,113
*Two heater packages required to provide kW indicated.
†On units with factory-installed outlet, use CRSINGLE014A00.
NOTES: The kW ratings shown above are at 240 and 480 v. Use the Multiplication
Factors table to determine heater capacity for your particular voltage.
MULTIPLICATION FACTORS
HEATER RATING
VOLTAGE
240
480
575
ACCESSORY
SINGLE
POINT BOX
PART NO.
CRSINGLE---A00
—
—
—
002
002
—
—
—
—
—
006
006
007
007
009
006
006
006
006
008
012
012
012
015
015
011
011
011†
014
014
VOLTAGE
DISTRIBUTION
V-3-60
200
208
230
240
440
460
480
545
575
600
EXAMPLE: 32.0 kW (at 240 v) heater on 208 v
= 32.0 (.75 mult factor)
= 24.0 kW capacity at 208 v.
54
MULTIPLICATION
FACTOR
0.69
0.75
0.92
1.00
0.84
0.92
1.00
0.90
1.00
1.09
PERFORMANCE DATA (cont)
UNIT
548F
INDOOR-FAN
MOTOR
Standard
036
Alternate
High Static
Standard
048
Alternate
High Static
Standard
060
Alternate
High Static
Standard
072
High Static
Standard,
Alternate
090
High Static
Standard
102
High Static
Standard
120
Alternate
High Static
UNIT
VOLTAGE
208/230
460
575
208/230
460
575
208/230
460
575
208/230
460
575
208/230
460
575
208/230
460
575
208/230
460
575
208/230
460
575
208/230
460
575
208/230
460
575
208/230
460
575
208/230
460
575
208/230
460
575
208/230
460
575
208/230
460
575
208/230
460
575
208/230
460
575
208/230
460
575
MAXIMUM ACCEPTABLE
CONTINUOUS BHP*
MAXIMUM ACCEPTABLE
OPERATING WATTS
0.34
440
1.00
1000
2.40
2120
0.75
850
1.00
1000
2.40
2120
1.20
1340
1.30/2.40†
2120
2.90
2562
2.40
2120
2.90
2562
2.40
2120
3.70
3313
2.40
2120
3.70
3313
2.40
2120
2.90
2615
5.25
4400
MAXIMUM
AMP DRAW
3.3
1.8
1.8
5.1
2.2
2.2
6.1
2.7
2.7
3.1
1.9
1.9
5.1
2.2
2.2
6.1
2.7
2.7
6.2
3.4
3.4
9.2/6.1†
2.7
2.7
6.1
2.7
2.7
6.1
2.7
2.7
7.9
3.6
3.6
6.1
2.7
2.7
11.1
5.0
5.0
6.1
2.7
2.7
11.1
5.0
5.0
6.1
2.7
2.7
7.9
3.6
3.6
15.0
7.4
7.4
MOTOR
EFFICIENCY (%)
75
75
74
84
80
80
80
NOTES:
1. All indoor-fan motors 5 hp and larger meet the minimum efficiency requirements as established by the Energy Policy Act of 1992 (EPACT) effective
October 24, 1997.
2. High-static motor not available on single-phase units.
LEGEND
BHP — Brake Horsepower
*Extensive motor and electrical testing on these units ensures that the full horsepower range of the motors can be utilized with confidence. Using your fan motors
up to the horsepower ratings shown in this table will not result in nuisance tripping or premature motor failure. Unit warranty will not be affected.
†Single-phase/three-phase.
55
50TFQ004-012
548F036-120
INDOOR-FAN MOTOR PERFORMANCE — 548F UNITS
50TFQ004-012
548F036-120
ELECTRICAL DATA
UNITS WITHOUT ELECTRICAL CONVENIENCE OUTLET
UNIT
548F
NOMINAL
V-PH-Hz
IFM
TYPE
VOLTAGE
RANGE
Min
Max
COMPRESSOR
(each)
RLA
LRA
OFM
FLA
IFM
FLA
STD
187
254
16.4
96.0
1.5
3.1
ALT
187
254
16.4
96.0
1.5
4.9
STD
187
254
10.2
75.0
1.5
3.1
ALT
187
254
10.2
75.0
1.5
4.9
HIGH-STATIC
187
254
10.2
75.0
1.5
5.8
STD
414
508
4.8
40.0
0.8
1.7
ALT
414
508
4.8
40.0
0.8
2.1
HIGH-STATIC
414
508
4.8
40.0
0.8
2.6
STD
ALT
HIGH-STATIC
518
518
518
632
632
632
3.8
3.8
3.8
31.0
31.0
31.0
0.8
0.8
0.8
1.7
2.1
2.6
STD
187
254
29.1
132.0
1.5
3.5
ALT
187
254
29.1
132.0
1.5
4.9
STD
187
254
16.8
91.0
1.5
3.5
ALT
187
254
16.8
91.0
1.5
4.9
HIGH-STATIC
187
254
16.8
91.0
1.5
5.8
208/230-1-60
208/230-3-60
036
(3 Tons)
460-3-60
575-3-60
208/230-1-60
048
(4 Tons)
208/230-3-60
NOTE: Legend and Notes for Electrical Data are on page 64.
56
ELECTRIC
HEAT*
Nominal
FLA
kW**
—
—
3.3/ 4.4
15.9/18.3
4.9/ 6.5
23.6/27.1
6.5/ 8.7
31.3/36.3
7.9/10.5
38.0/43.8
9.8/13.0
47.1/54.2
—
—
3.3/ 4.4
15.9/18.3
4.9/ 6.5
23.6/27.1
6.5/ 8.7
31.3/36.3
7.9/10.5
38.0/43.8
9.8/13.0
47.1/54.2
—
—
3.3/ 4.4
9.2/10.6
4.9/ 6.5
13.6/15.6
6.5/ 8.7
18.0/20.9
7.9/10.5
21.9/25.3
12.0/16.0
33.3/38.5
—
—
3.3/ 4.4
9.2/10.6
4.9/ 6.5
13.6/15.6
6.5/ 8.7
18.0/20.9
7.9/10.5
21.9/25.3
12.0/16.0
33.3/38.5
—
—
3.3/ 4.4
9.2/10.6
4.9/ 6.5
13.6/15.6
6.5/ 8.7
18.0/20.9
7.9/10.5
21.9/25.3
12.0/16.0
33.3/38.5
—
—
6.0
7.2
8.8
10.6
11.5
13.8
14.0
16.8
—
—
6.0
7.2
8.8
10.6
11.5
13.8
14.0
16.8
—
—
6.0
7.2
8.8
10.6
11.5
13.8
14.0
16.8
—
—
—
—
—
—
—
—
3.3/ 4.4
15.9/18.3
6.5/ 8.7
31.3/36.3
9.8/13.0
47.1/54.2
13.1/17.4
63.0/72.5
15.8/21.0
76.0/87.5
—
—
3.3/ 4.4
15.9/18.3
6.5/ 8.7
31.3/36.3
9.8/13.0
47.1/54.2
13.1/17.4
63.0/72.5
15.8/21.0
76.0/87.5
—
—
4.9/ 6.5
13.6/15.6
6.5/ 8.7
18.0/20.9
12.0/16.0
33.3/38.5
15.8/21.0
43.9/50.5
—
—
4.9/ 6.5
13.6/15.6
6.5/ 8.7
18.0/20.9
12.0/16.0
33.3/38.5
15.8/21.0
43.9/50.5
—
—
4.9/ 6.5
13.6/15.6
6.5/ 8.7
18.0/20.9
12.0/16.0
33.3/38.5
15.8/21.0
43.9/50.5
POWER SUPPLY
MCA
MOCP
25.5/ 25.5
45.4/ 48.4
55.0/ 59.4
64.6/ 70.9
73.0/ 80.3
84.4/ 93.3
26.9/ 26.9
46.8/ 49.8
56.4/ 60.8
66.0/ 72.3
74.4/ 81.7
85.8/ 94.7
17.8/ 17.8
29.3/ 31.0
34.8/ 37.3
40.3/ 43.9
45.1/ 49.4
59.4/ 65.9
19.2/ 19.2
30.7/ 32.4
36.2/ 38.7
41.7/ 45.3
46.5/ 50.8
60.8/ 67.3
20.1/ 20.1
31.6/ 33.3
37.1/ 39.6
42.6/ 46.2
47.4/ 51.7
61.7/ 68.2
8.1
12.1
21.4
25.4
29.1
8.9
17.9
22.2
26.2
29.9
9.4
18.4
22.7
26.7
30.4
6.4
7.1
7.5
41.4/ 41.4
61.3/ 64.3
80.5/ 86.8
100.3/109.1
120.1/132.0
136.4/150.8
42.8/ 42.8
62.7/ 65.7
81.9/ 88.2
107.7/110.5
121.5/133.4
137.8/152.2
26.0/ 26.0
43.0/ 45.5
48.5/ 52.1
67.6/ 74.1
80.9/ 89.1
27.4/ 27.4
44.4/ 46.9
49.9/ 53.5
69.0/ 75.5
82.3/ 90.5
28.3/ 28.3
45.3/ 47.8
50.8/ 54.4
69.9/ 76.4
83.2/ 91.4
30/ 30††
50/ 50††
60/ 60††
70/ 80
80/ 90
90/100
30/ 30††
50/ 50††
60/ 70
70/ 80
80/ 90
90/100
20/ 20††
30/ 35††
35/ 40††
45/ 45††
50/ 50††
60/ 70
20/ 20††
35/ 35††
40/ 40††
45/ 50††
50/ 60††
70/ 70
25/ 25††
35/ 35††
40/ 40††
45/ 50††
50/ 60††
70/ 70
15††
20††
25††
30††
30††
15††
20††
25††
30††
30††
15††
20††
25††
30††
35††
15††
15††
15††
45/ 45††
70/ 70
90/ 90
110/110
125/150
150/175
45/ 45††
70/ 70
90/ 90
110/125
125/150
150/175
30/ 30††
45/ 50††
50/ 60††
70/ 80
90/ 90
30/ 30††
45/ 50††
50/ 60††
70/ 80
90/100
30/ 30††
50/ 60††
60/ 60††
70/ 80
90/100
DISCONNECT
SIZE†
FLA
25/
43/
52/
61/
68/
79/
26/
45/
53/
62/
70/
80/
17/
28/
33/
38/
43/
56/
19/
30/
35/
40/
44/
57/
20/
31/
36/
41/
45/
58/
25
46
56
66
75
87
26
47
57
68
77
89
17
30
35
42
47
62
19
31
37
43
48
63
20
32
38
44
49
64
8
16
20
24
27
9
17
21
25
28
9
18
22
25
29
6
7
7
39/ 39
58/ 60
75/ 81
93/102
112/123
127/140
41/ 41
59/ 62
77/ 83
95/103
113/124
128/141
25/ 25
41/ 43
46/ 49
63/ 69
76/ 83
27/ 27
42/ 45
47/ 45
65/ 71
77/ 85
28/ 28
43/ 46
48/ 52
66/ 72
78/ 86
LRA
107/107
123/125
131/184
138/143
145/151
154/161***
111/111
127/130
135/138
143/148
149/155
158/166***
86/ 86
95/ 97
100/102
104/107
108/111
119/124
90/ 90
100/101
104/106
108/111
112/116
124/129
120/120
129/130
133/135
138/141
142/145
153/158
45
52
55
59
62
48
55
59
62
65
62
70
73
76
79
35
37
49
143/143
159/161
174/179
190/197
206/215
219/230
147/147
163/166
179/184
194/202
210/220
223/235
102/102
115/117
120/123
135/140
146/152
106/106
120/122
124/127
140/145
150/157
136/136
149/151
154/157
169/174
180/186***
ELECTRICAL DATA (cont)
UNIT
548F
NOMINAL
V-PH-Hz
460-3-60
IFM
TYPE
VOLTAGE
RANGE
COMPRESSOR
(each)
Min
RLA
Max
LRA
STD
414
508
8.4
50.0
ALT
414
508
8.4
50.0
HIGH-STATIC
414
508
8.4
50.0
STD
ALT
HIGH-STATIC
518
518
518
632
632
632
6.7
6.7
6.7
37.0
37.0
37.0
STD
187
254
26.7
170.0
ALT
187
254
26.7
170.0
STD
187
254
15.4
124.0
ALT
187
254
15.4
124.0
HIGH-STATIC
187
254
15.4
124.0
STD
414
508
7.7
59.6
ALT
414
508
7.7
59.6
HIGH-STATIC
414
508
7.7
59.6
STD
ALT
HIGH-STATIC
518
518
518
632
632
632
6.2
6.2
6.2
49.4
49.4
49.4
048
(4 Tons)
(cont)
575-3-60
208/230-1-60
208/230-3-60
060
(5 Tons)
460-3-60
575-3-60
ELECTRIC
HEAT*
OFM IFM
FLA FLA Nominal
FLA
kW**
—
—
6.0
7.2
0.8 1.8
11.5
13.8
14.0
16.8
23.0
27.7
—
—
6.0
7.2
11.5
13.8
0.8 2.1
14.0
16.8
23.0
27.7
—
—
6.0
7.2
11.5
13.8
0.8 2.6
14.0
16.8
23.0
27.7
0.8 1.8
—
—
0.8 2.1
—
—
0.8 2.6
—
—
—
—
4.9/ 6.5 23.6/27.0
6.5/ 8.7 31.3/36.3
1.5 5.9
9.8/13.0 47.1/54.2
13.1/17.4 63.0/72.5
15.8/21.0 76.0/87.5
—
—
4.9/ 6.5 23.6/27.1
6.5/ 8.7 31.3/36.3
1.5 8.8
9.8/13.0 47.1/54.2
13.1/17.4 63.0/72.5
15.8/21.0 76.0/87.5
—
—
4.9/ 6.5 13.6/15.6
7.9/10.5 21.9/25.3
1.5 5.9
12.0/16.0 33.3/38.5
15.8/21.0 43.9/50.5
19.9/26.5 55.2/63.8
—
—
4.9/ 6.5 13.6/15.6
7.9/10.5 21.9/25.3
1.5 5.8
12.0/16.0 33.3/38.5
15.8/21.0 43.9/50.5
19.9/26.5 55.2/63.8
—
—
4.9/ 6.5 13.6/15.6
7.9/10.5 21.9/25.3
1.5 7.5
12.0/16.0 33.3/38.5
15.8/21.0 43.9/50.5
19.9/26.5 55.2/63.8
—
—
6.0
7.2
11.5
13.8
0.8 3.2
14.0
16.8
23.0
27.7
25.5
30.7
—
—
6.0
7.2
11.5
13.8
0.8 2.6
14.0
16.8
23.0
27.7
25.5
30.7
—
—
6.0
7.2
11.5
13.8
0.8 3.4
14.0
16.8
23.0
27.7
25.5
30.7
0.8 3.2
—
—
0.8 2.6
—
—
0.8 3.4
—
—
NOTE: Legend and Notes for Electrical Data are on page 64.
57
POWER SUPPLY
DISCONNECT
SIZE†
MCA
MOCP
FLA
LRA
13.1
22.1
30.4
34.1
47.7
13.4
22.4
30.7
34.4
48.0
13.9
22.9
31.2
34.9
48.5
10.7
10.7
11.1
40.8/ 40.8
70.3/ 74.7
79.9/ 86.2
99.7/108.5
119.5/131.4
135.8/150.2
48.5/ 48.5
78.0/ 82.4
87.6/ 93.9
107.4/116.2
127.2/139.1
143.5/157.9
26.7/ 26.7
43.7/ 46.2
54.0/ 58.3
68.3/ 74.8
81.5/ 89.8
95.7/106.4
26.6/ 26.6
43.6/ 46.1
53.9/ 58.2
68.2/ 74.7
81.4/ 89.7
95.6/106.3
28.3/ 28.3
45.3/ 47.8
55.6/ 59.9
69.9/ 76.4
83.1/ 91.4
97.3/108.0
13.6
22.6
30.9
34.6
48.3
52.0
13.0
22.0
30.3
34.0
47.7
51.4
13.8
22.8
31.1
34.8
48.5
52.2
11.0
10.5
11.1
15††
25††
35††
35††
50††
15††
25††
35††
35††
50††
15††
25††
35††
35††
50††
15††
15††
15††
45/ 45††
80/ 80
80/ 90
100/110
125/150
150/175
50/ 50††
80/ 90
90/100
110/125
150/150
150/175
30/ 30††
45/ 50††
60/ 60††
70/ 80
90/ 90
100/110
30/ 30††
45/ 50††
60/ 60
70/ 80
90/ 90
100/110
30/ 30††
50/ 50††
60/ 60††
70/ 80
90/100
100/110
15††
25††
35††
35††
50††
60††
15††
25††
35††
35††
50††
60††
15††
25††
35††
35††
50††
60††
15††
15††
15††
13
21
29
32
45
13
21
29
32
45
14
22
29
33
45
10
10
11
39/ 39
66/ 70
75/ 81
93/102
112/123
127/140
48/ 48
75/ 79
84/ 90
102/110
121/131
135/149
26/ 26
42/ 44
51/ 55
65/ 70
77/ 84
90/100
26/ 26
42/ 44
51/ 55
64/ 70
77/ 84
90/ 99
28/ 28
44/ 46
53/ 57
66/ 72
79/ 86
92/101
13
22
29
33
45
49
13
21
29
32
45
48
14
22
30
33
46
49
11
10
11
56
63
70
73
84
58
65
72
75
86
72
80
86
89
100
42
43
55
184/184
208/211
215/220***
231/238***
247/257***
260/272***
222/222
246/249
253/258***
269/276***
285/294***
298/309***
138/138
152/154
160/163
171/177
182/189***
193/202***
169/169
182/184
191/194
202/207
213/219***
224/233***
188/188
201/203
210/213
221/226
232/238***
243/252***
67
75
81
84
95
98
82
89
96
99
110
113
92
99
105
108
119
122
56
67
75
50TFQ004-012
548F036-120
UNITS WITHOUT ELECTRICAL CONVENIENCE OUTLET (cont)
50TFQ004-012
548F036-120
ELECTRICAL DATA (cont)
UNITS WITHOUT ELECTRICAL CONVENIENCE OUTLET (cont)
UNIT
548F
NOMINAL
V-PH-Hz
IFM
TYPE
VOLTAGE
RANGE
COMPRESSOR
(each)
Min Max
RLA
LRA
OFM IFM
FLA FLA
STD
187
254
22.7
146.0
1.4
5.8
HIGH-STATIC
187
254
22.7
146.0
1.4
7.5
STD
414
508
11.4
73.0
0.7
2.6
HIGH-STATIC
414
508
11.4
73.0
0.7
3.4
STD
HIGH-STATIC
518
518
632
632
9.1
9.1
58.4
58.4
0.7
0.7
2.6
3.4
STD
187
254
13.4
91.0
1.4
5.8
HIGH-STATIC
187
254
13.4
91.0
1.4
10.6
STD
414
508
6.7
42.0
0.7
2.6
HIGH-STATIC
414
508
6.7
42.0
0.7
4.8
208/230-3-60
072
(6 Tons)
460-3-60
575-3-60
208/230-3-60
090
(71/2 Tons)
460-3-60
STD
575-3-60
2.6
518
632
HIGH-STATIC
5.4
39.0
0.7
4.8
NOTE: Legend and Notes for Electrical Data are on page 64.
58
ELECTRIC HEAT*
Nominal
kW**
—
4.9/ 6.5
7.9/10.5
12.0/16.0
15.8/21.0
19.9/26.5
—
4.9/ 6.5
7.9/10.5
12.0/16.0
15.8/21.0
19.9/26.5
—
6.0
11.5
14.0
23.0
25.5
—
6.0
11.5
14.0
23.0
25.5
—
—
—
7.8/10.5
12.0/16.0
18.6/24.8
24.0/32.0
31.8/42.4
—
7.8/10.5
12.0/16.0
18.6/24.8
24.0/32.0
31.8/42.4
—
14.0
16.5
27.8
33.0
41.7
—
14.0
16.5
27.8
33.0
41.7
—
17.0
34.0
—
17.0
34.0
POWER SUPPLY
DISCONNECT
SIZE†
FLA
MCA
MOCP
FLA
LRA
—
13.6/15.6
21.9/25.3
33.3/38.5
43.9/50.5
55.2/63.8
—
13.6/15.6
21.9/25.3
33.3/38.5
43.9/50.5
55.2/63.8
—
7.2
13.8
16.8
27.7
30.7
—
7.2
13.8
16.8
27.7
30.7
—
—
—
21.7/ 25.0
33.3/ 38.5
51.6/ 59.7
66.6/ 77.0
88.3/102.0
—
21.7/ 25.0
33.3/ 38.5
51.6/ 59.7
66.6/ 77.0
88.3/102.0
—
16.7
19.8
33.4
39.7
50.2
—
16.7
19.8
33.4
39.7
50.2
—
17.1
34.1
—
17.1
34.1
35.6/ 35.6
52.6/ 55.1
63.0/ 67.2
77.2/ 83.7
90.5/ 98.7
104.6/115.3
37.3/ 37.3
54.3/ 56.8
64.7/ 68.9
78.9/ 85.4
92.2/100.4
106.3/117.0
17.6
26.6
34.8
38.6
52.2
55.9
18.4
27.4
35.6
39.4
53.0
56.7
14.0
14.7
38.8/ 38.8
65.9/ 70.0
80.4/ 86.9
103.3/113.4
122.0/135.0
149.1/166.3
43.6/ 43.6
70.7/ 74.8
85.2/ 91.7
108.1/118.2
126.8/139.8
153.9/171.1
19.1
40.0
43.8
60.8
68.7
81.8
21.3
42.2
46.0
63.0
70.9
84.0
15.4
36.7
68.0
17.1
38.5
59.7
40/ 40††
60/ 60††
70/ 70
80/ 90
100/100
110/125
40/ 40††
60/ 60††
70/ 70
80/ 90
100/110
110/125
20††
30††
35††
40††
60††
60††
20††
30††
40††
40††
60††
60††
15††
15††
40/ 40††
70/ 80
90/ 90
110/125
125/150
150/175
45/ 45††
80/ 80
90/100
110/125
150/150
175/175
20††
45††
45††
70
70
90
25††
45††
50††
70
80
90
20††
40††
60††
20††
40††
60††
34/ 34
50/ 52
60/ 63
73/ 79
85/ 92
98/108
36/ 36
52/ 54
62/ 65
75/ 81
87/ 94
100/110
17
25
33
36
49
52
18
26
34
37
50
53
14
14
41/ 41
66/ 69
79/ 85
100/109
117/129
142/158
46/ 46
71/ 75
85/ 91
106/115
123/135
148/164
20
39
43
58
66
78
23
42
45
61
68
80
16
36
55
18
38
57
190/190
204/206
212/215
223/229
234/241***
245/254***
209/209
223/225
231/234
242/248***
253/260***
264/273***
95
102
109
112
123
126
105
112
118
121
132
135
76
84
229/229
251/254
262/268***
281/289***
296/306***
317/331***
273/273
294/298
306/311***
324/332***
339/350***
361/375***
108
124
128
141
147
158
130
146
149
163
169
180***
97
114
131
114
132
149
ELECTRICAL DATA (cont)
UNIT
548F
NOMINAL
V-PH-Hz
IFM
TYPE
VOLTAGE
RANGE
Min
Max
COMPRESSOR
(each)
RLA
LRA
OFM
FLA
IFM
FLA
STD
187
254
16.0
137.0
1.4
5.8
HIGH-STATIC
187
254
16.0
137.0
1.4
10.6
STD
414
508
8.3
69.0
0.7
2.6
HIGH-STATIC
414
508
8.3
69.0
0.7
4.8
518
632
6.4
58.0
0.7
208/230-3-60
102
(81/2 Tons)
460-3-60
STD
575-3-60
2.6
HIGH-STATIC
208/230-3-60
4.8
STD
187
254
17.2
124.0
1.4
5.8
ALT
187
254
17.2
124.0
1.4
7.5
HIGH-STATIC
187
254
17.2
124.0
1.4
15.0
STD
414
508
8.6
59.6
0.7
2.6
ALT
414
508
8.6
59.6
0.7
3.4
HIGH-STATIC
414
508
8.6
59.6
0.7
7.4
STD
518
632
6.9
49.4
0.7
2.6
ALT
518
632
6.9
49.4
0.7
3.4
HIGH-STATIC
518
632
6.9
49.4
0.7
7.4
120
(10 Tons)
460-3-60
575-3-60
NOTE: Legend and Notes for Electrical Data are on page 64.
59
ELECTRIC HEAT*
Nominal
kW**
—
7.8/10.5
12.0/16.0
18.6/24.8
24.0/32.0
31.8/42.4
—
7.8/10.5
12.0/16.0
18.6/24.8
24.0/32.0
31.8/42.4
—
14.0
16.5
27.8
33.0
41.7
—
14.0
16.5
27.8
33.0
41.7
—
17.0
34.0
—
17.0
34.0
—
7.8/10.4
12.0/16.0
24.0/32.0
31.8/42.4
37.6/50.0
—
7.8/10.4
12.0/16.0
24.0/32.0
31.8/42.4
37.6/50.0
—
7.8/10.4
12.0/16.0
24.0/32.0
31.8/42.4
37.6/50.0
—
16.5
27.8
33.0
41.7
50.0
—
16.5
27.8
33.0
41.7
50.0
—
16.5
27.8
33.0
41.7
50.0
—
17.0
34.0
51.0
—
17.0
34.0
51.0
—
17.0
34.0
51.0
POWER SUPPLY
DISCONNECT
SIZE†
FLA
MCA
MOCP
FLA
—
21.7/ 25.0
33.3/ 38.5
51.6/ 59.7
66.6/ 77.0
88.3/102.0
—
21.7/ 25.0
33.3/ 38.5
51.6/ 59.7
66.6/ 77.0
88.3/102.0
—
16.7
19.8
33.4
39.7
50.2
—
16.7
19.8
33.4
39.7
50.2
—
17.1
34.1
—
17.1
34.1
—
21.7/ 25.0
33.3/ 38.5
66.6/ 77.0
88.3/102.0
104.4/120.3
—
21.7/ 25.0
33.3/ 38.5
66.6/ 77.0
88.3/102.0
104.4/120.3
—
21.7/ 25.0
33.3/ 38.5
66.6/ 77.0
88.3/102.0
104.4/120.3
—
19.8
33.4
39.7
50.2
60.1
—
19.8
33.4
39.7
50.2
60.1
—
19.8
33.4
39.7
50.2
60.1
—
17.1
34.1
51.2
—
17.1
34.1
51.2
—
17.1
34.1
51.2
44.6/ 44.6
71.7/ 75.9
86.2/ 92.7
109.1/119.2
127.9/140.9
155.0/172.1
49.4/ 49.4
76.5/ 80.7
91.0/ 97.5
113.9/124.0
132.7/145.7
159.8/176.9
22.7
43.6
47.4
64.4
72.3
85.4
24.9
45.8
49.6
66.6
74.5
87.6
17.6
59.0
60.2
19.4
40.7
62.0
47.3/ 47.3
74.4/ 78.6
88.9/ 95.4
130.6/143.6
157.7/174.8
177.8/167.6
49.0/ 49.0
76.1/ 80.8
90.6/ 97.1
132.3/145.3
159.4/176.5
179.5/169.3
56.5/ 56.5
83.6/ 87.8
98.1/104.6
139.8/152.8
166.9/184.0
187.0/176.8
23.4
48.1
65.1
73.0
86.1
83.5
24.2
48.9
65.9
73.8
86.9
84.3
28.2
52.9
69.9
77.8
90.9
88.3
18.7
40.1
61.4
69.9
19.4
40.7
62.0
70.6
22.6
43.9
65.2
73.8
45/ 45††
80/ 80
90/100
110/125
150/150
175/175
50/ 50††
80/ 90
100/100
125/125
150/150
175/200
25††
45††
50††
70
80
90
25††
50††
50††
70
80
90
20††
40††
70††
20††
45††
70
50/ 50††
80/ 80
90/100
150/150
175/175
200/175
50/ 50††
80/ 90
100/100
150/150
175/200
200/175
60/ 60††
90/ 90
100/110
150/175
175/200
200/200
25††
50††
70
80
90
90
25††
50††
70
80
90
90
30††
60††
70
80
100
100
20††
50††
70
70
20††
50††
70
80
25††
45††
70
80
47/ 47
72/ 75
85/ 91
106/115
123/135
148/164
52/ 52
77/ 81
91/ 96
112/121
129/141
154/170
24
43
46
62
69
81
26
45
49
65
72
84
18
38
58
20
40
60
49/ 49
74/ 78
88/ 94
126/138
151/167
170/188
51/ 51
76/ 80
90/ 96
128/140
153/169
171/190
60/ 60
85/ 89
98/104
137/149
162/177
180/198
24
47
63
70
82
93
25
48
64
71
83
94
30
53
68
76
88
99
20
39
59
78
20
40
60
79
24
44
63
83
LRA
321/321
343/346
354/360***
373/381***
388/398***
409/428***
365/365
386/390***
398/403***
416/424***
431/442***
453/467***
162
178
182
195
201
212***
184
200
203
217
223
234***
135
152
169
152
170
187
295/295
317/320
328/334***
362/372***
383/397***
399/415***
314/314
336/389***
347/353***
381/391***
402/416***
418/434***
362/362
384/387***
395/401***
429/439***
450/464***
466/482***
143
163
176
183
193***
203***
182
202
216
222
233***
243***
176
196
210
216
227***
237***
118
135
152
169
149
166
183
201***
145
162
179
196***
50TFQ004-012
548F036-120
UNITS WITHOUT ELECTRICAL CONVENIENCE OUTLET (cont)
50TFQ004-012
548F036-120
ELECTRICAL DATA (cont)
UNITS WITH ELECTRICAL CONVENIENCE OUTLET
UNIT
548F
NOMINAL
V-PH-Hz
IFM
TYPE
VOLTAGE
RANGE
Min
Max
COMPRESSOR
(each)
RLA
LRA
OFM
FLA
IFM
FLA
STD
187
254
16.4
96.0
1.5
3.1
ALT
187
254
16.4
96.0
1.5
4.9
STD
187
254
10.2
75.0
1.5
3.1
ALT
187
254
10.2
75.0
1.5
4.9
HIGH-STATIC
187
254
10.2
75.0
1.5
5.8
STD
414
508
4.8
40.0
0.8
1.7
ALT
414
508
4.8
40.0
0.8
2.1
HIGH-STATIC
414
508
4.8
40.0
0.8
2.6
STD
ALT
HIGH-STATIC
518
518
518
632
632
632
3.8
3.8
3.8
31.0
31.0
31.0
0.8
0.8
0.8
1.7
2.1
2.6
STD
187
254
29.1
132.0
1.5
3.5
ALT
187
254
29.1
132.0
1.5
4.9
STD
187
254
16.8
91.0
1.5
3.5
ALT
187
254
16.8
91.0
1.5
4.9
HIGH-STATIC
187
254
16.8
91.0
1.5
5.8
208/230-1-60
208/230-3-60
036
(3 Tons)
460-3-60
575-3-60
208/230-1-60
048
(4 Tons)
208/230-3-60
NOTE: Legend and Notes for Electrical Data are on page 64.
60
ELECTRIC
HEAT*
Nominal
FLA
kW**
—
—
3.3/ 4.4
15.9/18.3
4.9/ 6.5
23.6/27.1
6.5/ 8.7
31.3/36.3
7.9/10.5
38.0/43.6
9.8/13.0
47.1/54.2
—
—
3.3/ 4.4
15.9/18.3
4.9/ 6.5
23.6/27.1
6.5/ 8.7
31.3/36.3
7.9/10.5
38.0/43.6
9.8/13.0
47.1/54.2
—
—
3.3/ 4.4
9.2/10.6
4.9/ 6.5
13.6/15.6
8.5/ 8.7
18.0/20.9
7.9/10.5
21.9/25.3
12.0/16.0
33.3/38.5
—
—
3.3/ 4.4
9.2/10.6
4.9/ 6.5
13.6/15.6
6.5/ 8.7
18.0/20.9
7.9/10.5
21.9/25.3
12.0/16.0
33.3/38.5
—
—
3.3/ 4.4
9.2/10.6
4.9/ 6.5
13.6/15.6
6.5/ 8.7
18.0/20.9
7.9/10.5
21.9/25.3
12.0/16.0
33.3/38.5
—
—
6.0
7.2
8.8
10.6
11.5
13.8
14.0
16.8
—
—
6.0
7.2
8.8
10.6
11.5
13.8
14.0
16.8
—
—
6.0
7.2
8.8
10.6
11.5
13.8
14.0
16.8
—
—
—
—
—
—
—
—
3.3/ 4.4
15.9/18.3
6.5/ 8.7
31.3/36.3
9.8/13.0
47.1/54.2
13.1/17.4
63.0/72.5
15.8/21.0
76.0/87.5
—
—
3.3/ 4.4
15.9/18.3
6.5/ 8.7
31.3/36.3
9.8/13.0
47.1/54.2
13.1/17.4
63.0/72.5
15.8/21.0
76.0/87.5
—
—
4.9/ 6.5
13.6/15.6
6.5/ 8.7
18.0/20.9
12.0/16.0
33.3/38.5
15.8/21.0
43.9/50.5
—
—
4.9/ 6.5
13.6/15.6
6.5/ 8.7
18.0/20.9
12.0/16.0
33.3/38.5
15.8/21.0
43.9/50.5
—
—
4.9/ 6.5
13.6/15.6
6.5/ 8.7
18.0/20.9
12.0/16.0
33.3/38.5
15.8/21.0
43.9/50.5
POWER SUPPLY
DISCONNECT
SIZE†
MCA
MOCP
FLA
30.3/ 30.3
50.2/ 53.2
59.8/ 64.2
69.4/ 75.7
77.8/ 85.1
89.2/ 98.1
31.7/ 31.7
51.6/ 54.6
61.2/ 65.6
70.8/ 77.1
79.2/ 86.5
90.6/ 99.5
22.6/ 22.6
34.1/ 35.8
39.6/ 42.1
45.1/ 48.7
49.9/ 54.2
64.2/ 70.7
24.0/ 24.0
35.5/ 37.2
41.0/ 43.5
46.5/ 50.1
51.3/ 55.6
65.6/ 72.1
24.9/ 24.9
36.4/ 38.1
41.9/ 44.4
47.4/ 51.0
52.2/ 56.5
66.5/ 73.0
10.3
19.3
23.5
27.5
31.3
11.1
20.1
24.3
28.3
32.1
11.6
20.6
24.8
28.8
32.6
8.2
8.8
9.2
46.2/ 46.2
66.1/ 69.1
85.3/ 91.6
105.1/113.9
124.1/136.8
142.1/155.6
47.6/ 47.6
67.5/ 70.5
86.7/ 93.0
106.5/115.3
126.3/138.2
142.6/157.0
30.8/ 30.8
47.8/ 50.3
53.3/ 56.9
72.4/ 78.9
85.7/ 93.9
32.2/ 32.2
49.2/ 51.7
54.7/ 58.3
73.8/ 80.3
87.1/ 95.3
33.1/ 33.1
50.1/ 52.6
55.6/ 59.2
74.7/ 81.2
88.0/ 96.2
35/ 35††
60/ 60††
70/ 70
70/ 80
80/ 90
90/100
35/ 35††
60/ 60††
70/ 70
80/ 80
80/ 90
100/110
25/ 25††
40/ 40††
45/ 45††
50/ 50††
60/ 60††
70/ 80††
30/ 30††
40/ 40††
45/ 45††
50/ 60††
60/ 60††
70/ 80
25/ 25††
40/ 40††
45/ 45††
50/ 50††
60/ 60††
70/ 80
15††
20††
25††
30††
35††
15††
25††
25††
30††
35††
15††
25††
25††
30††
35††
15††
15††
15††
50/ 50††
70/ 70
90/100
110/126
125/150
150/175
50/ 50††
70/ 80
90/100
110/125
150/150
150/175
35/ 35††
50/ 60††
60/ 60††
80/ 80
90/100
35/ 35††
50/ 60††
60/ 60††
80/ 90
90/100
35/ 35††
60/ 60††
60/ 60††
80/ 90
90/100
30/ 30
48/ 51
57/ 61
66/ 72
74/ 81
84/ 72
32/ 32
50/ 53
59/ 63
68/ 73
75/ 82
86/ 94
23/ 23
34/ 35
39/ 41
44/ 47
48/ 52
61/ 67
25/ 25
35/ 37
40/ 43
45/ 49
50/ 54
63/ 69
26/ 26
36/ 38
41/ 44
46/ 50
51/ 55
64/ 70
10
19
23
26
30
11
20
24
27
31
12
20
24
28
31
8
9
9
45/ 45
63/ 66
81/ 86
99/107
117/128
132/145
46/ 46
65/ 67
82/ 88
101/109
119/130
134/147
31/ 31
46/ 49
51/ 55
69/ 75
81/ 89
32/ 32
48/ 50
53/ 56
71/ 76
83/ 90
33/ 33
49/ 51
54/ 57
72/ 78
84/ 91
LRA
112/112
128/130
135/139
143/148
150/156***
159/166***
116/116
132/134
140/143
147/152
154/160***
163/170***
91/ 91
100/101
104/106
109/112
113/116
124/129
95/ 95
104/106
109/111
113/116
117/120
128/134
125/125
134/135
138/140
143/145
146/150
158/163
47
54
58
61
64
50
57
61
64
67
65
72
75
78
81
37
39
51
148/148
163/166
179/184
195/202
211/220
224/235
152/152
168/170
183/188
199/206
215/225
228/240
107/107
120/107
125/127
140/145
150/157
111/111
125/127
129/132
144/150
155/162
141/141
154/156
159/161
174/179
184/191***
ELECTRICAL DATA (cont)
UNIT
548F
NOMINAL
V-PH-Hz
460-3-60
IFM
TYPE
VOLTAGE
RANGE
COMPRESSOR
(each)
Min Max
RLA
LRA
STD
414
508
8.4
50.0
ALT
414
508
8.4
50.0
HIGH-STATIC
414
508
8.4
50.0
STD
ALT
HIGH-STATIC
518
518
518
632
632
632
6.7
6.7
6.7
37.0
37.0
37.0
STD
187
254
26.7
170.0
ALT
187
254
26.7
170.0
STD
187
254
15.4
124.0
ALT
187
254
15.4
124.0
HIGH-STATIC
187
254
15.4
124.0
STD
414
508
7.7
59.6
ALT
414
508
7.7
59.6
HIGH-STATIC
414
508
7.7
59.6
STD
ALT
HIGH-STATIC
518
518
518
632
632
632
6.2
6.2
6.2
49.4
49.4
49.4
048
(4 Tons)
(cont)
575-3-60
208/230-1-60
208/230-3-60
060
(5 Tons)
460-3-60
575-3-60
ELECTRIC
HEAT*
OFM IFM
FLA FLA Nominal
FLA
kW**
—
—
6.0
7.2
0.8 1.8
11.5
13.8
14.0
16.8
23.0
27.7
—
—
6.0
7.2
11.5
13.8
0.8 2.1
14.0
16.8
23.0
27.7
—
—
6.0
7.2
11.5
13.8
0.8 2.6
14.0
16.8
23.0
27.7
0.8 1.8
—
—
0.8 2.1
—
—
0.8 2.6
—
—
—
—
4.9/ 6.5 23.6/27.1
6.5/ 8.7 31.3/36.3
1.5 5.9
9.8/13.0 47.1/54.2
13.1/17.4 63.0/72.5
15.8/21.0 76.0/87.5
—
—
4.9/ 6.5 23.6/27.1
6.5/ 8.7 31.3/36.3
1.5 8.8
9.8/13.0 47.1/54.2
13.1/17.4 63.0/72.5
15.8/21.0 76.0/87.5
—
—
4.9/ 6.5 13.6/15.6
7.9/10.5 21.9/25.3
1.5 5.9
12.0/16.0 33.3/38.5
15.8/21.0 43.9/50.5
19.9/26.5 55.2/63.8
—
—
4.9/ 6.5 13.6/15.6
7.9/10.5 21.9/25.3
1.5 5.8
12.0/16.0 33.3/38.5
15.8/21.0 43.9/50.5
19.9/26.5 55.2/63.8
—
—
4.9/ 6.5 13.6/15.6
7.9/10.5 21.9/25.3
1.5 7.5
12.0/16.0 33.3/38.5
15.8/21.0 43.9/50.5
19.9/26.5 55.2/63.8
—
—
6.0
7.2
11.5
13.8
0.8 3.2
14.0
16.8
23.0
27.7
25.5
30.7
—
—
6.0
7.2
11.5
13.8
0.8 2.6
14.0
16.8
23.0
27.7
25.5
30.7
—
—
6.0
7.2
11.5
13.8
0.8 3.4
14.0
16.8
23.0
27.7
25.5
30.7
0.8 3.2
—
—
0.8 2.6
—
—
0.8 3.4
—
—
NOTE: Legend and Notes for Electrical Data are on page 64.
61
POWER SUPPLY
DISCONNECT
SIZE†
MCA
MOCP
FLA
15.3
24.3
32.5
36.3
49.9
15.6
24.6
32.8
36.6
50.2
16.1
25.1
33.3
37.1
50.7
12.2
12.4
12.8
45.6/ 45.6
75.1/ 79.5
84.7/ 91.0
104.3/113.3
124.3/136.2
140.6/155.0
48.5/ 48.5
78.0/ 82.4
87.6/ 93.9
107.4/116.2
127.2/139.1
143.5/157.9
31.5/ 31.5
48.5/ 51.0
58.8/ 63.1
73.1/ 79.6
86.3/ 94.6
100.5/111.2
31.4/ 31.4
48.4/ 50.9
58.7/ 63.0
73.0/ 79.5
86.2/ 94.5
100.4/111.1
33.1/ 33.1
50.1/ 52.6
60.4/ 64.7
74.7/ 81.2
87.9/ 96.2
102.1/112.8
15.8
24.8
33.1
36.8
50.4
54.2
15.2
24.2
32.5
36.2
49.8
53.6
16.0
25.0
33.3
34.8
50.6
54.4
12.7
12.2
12.9
20††
25††
35††
40††
50††
20††
25††
35††
40††
60††
20††
30††
35††
40††
60††
15††
15††
15††
50/ 50††
80/ 80
90/100
110/125
150/150
150/175
50/ 50††
80/ 90
90/100
110/125
150/150
150/175
35/ 35††
50/ 60††
60/ 70
80/ 90
90/100
110/125
35/ 35††
50/ 60††
60/ 70
80/ 90
90/100
110/125
35/ 35††
60/ 60††
70/ 70
80/ 90
90/100
110/125
20††
30††
35††
40††
60††
60††
20††
30††
35††
40††
60††
60††
20††
25††
35††
35††
60††
60††
15††
15††
15††
15
23
31
34
47
15
24
31
35
47
16
24
32
35
48
12
12
13
45/ 45
72/ 76
81/ 86
99/107
117/128
132/145
48/ 48
75/ 79
84/ 90
102/110
121/131
135/149
32/ 32
47/ 50
57/ 61
70/ 76
82/ 90
95/105
32/ 32
47/ 50
57/ 61
70/ 76
82/ 90
95/105
34/ 34
49/ 52
59/ 63
72/ 78
84/ 92
97/107
16
24
32
35
48
51
15
24
31
35
47
51
16
24
32
33
48
51
13
12
13
LRA
58
66
72
75
86
60
67
74
77
88
75
82
88
91
102
44
45
57
189/189
213/216
220/225***
236/243***
252/261***
265/276***
222/222
246/249
253/258***
269/276***
285/294***
298/309***
143/143
157/159
165/168
176/181
187/193***
198/207***
174/174
187/189
195/199
207/212
217/224***
229/237***
193/193
206/208
214/218
226/231
236/243***
248/256***
70
77
83
86
97
100
84
91
98
101
112
115
94
101
107
108
121
124
57
69
77
50TFQ004-012
548F036-120
UNITS WITH ELECTRICAL CONVENIENCE OUTLET (cont)
50TFQ004-012
548F036-120
ELECTRICAL DATA (cont)
UNITS WITH ELECTRICAL CONVENIENCE OUTLET (cont)
UNIT
548F
NOMINAL
V-PH-Hz
IFM
TYPE
VOLTAGE
RANGE
Min Max
COMPRESSOR
(each)
RLA
LRA
OFM IFM
FLA FLA
STD
187
254
22.7
146.0
1.4
5.8
HIGH-STATIC
187
254
22.7
146.0
1.4
7.5
STD
414
508
11.4
73.0
0.7
2.6
HIGH-STATIC
414
508
11.4
73.0
0.7
3.4
STD
HIGH-STATIC
518
518
632
632
9.1
9.1
58.4
58.4
0.7
0.7
2.6
3.4
STD
187
254
13.4
91.0
1.4
5.8
HIGH-STATIC
187
254
13.4
91.0
1.4
10.6
STD
414
508
6.7
42.0
0.7
2.6
HIGH-STATIC
414
508
6.7
42.0
0.7
4.8
STD
518
632
5.4
39.0
0.7
2.6
HIGH-STATIC
518
632
5.4
39.0
0.7
4.8
208/230-3-60
072
(6 Tons)
460-3-60
575-3-60
208/230-3-60
090
(71/2 Tons)
460-3-60
575-3-60
NOTE: Legend and Notes for Electrical Data are on page 64.
62
ELECTRIC
HEAT*
Nominal
FLA
kW**
—
4.9/ 6.5
7.9/10.5
12.0/16.0
15.8/21.0
19.9/26.5
—
4.9/ 6.5
7.9/10.5
12.0/16.0
15.8/21.0
19.9/26.5
—
6.0
11.5
14.0
23.0
25.5
—
6.0
11.5
14.0
23.0
25.5
—
—
—
7.8/10.5
12.0/16.0
18.6/24.8
24.0/32.0
31.8/42.4
—
7.8/10.5
12.0/16.0
18.6/24.8
24.0/32.0
31.8/42.4
—
14.0
16.5
27.8
33.0
41.7
—
14.0
16.5
27.8
33.0
41.7
—
17.0
34.0
—
17.0
34.0
—
13.6/15.6
21.9/25.3
33.3/38.5
43.9/50.5
55.2/63.8
—
13.6/15.6
21.9/25.3
33.3/38.5
43.9/50.5
55.2/63.8
—
7.2
13.8
16.8
27.7
30.7
—
7.2
13.8
16.8
27.7
30.7
—
—
—
21.7/ 25.0
33.3/ 38.5
51.6/ 59.7
66.6/ 77.0
88.3/102.0
—
21.7/ 25.0
33.3/ 38.5
51.6/ 59.7
66.6/ 77.0
88.3/102.0
—
16.7
19.8
33.4
39.7
50.2
—
16.7
19.8
33.4
39.7
50.2
—
17.1
34.1
—
17.1
34.1
POWER SUPPLY
DISCONNECT
SIZE†
MCA
MOCP
FLA
LRA
40.4/ 40.4
57.4/ 59.9
67.8/ 72.0
82.0/ 88.5
95.3/103.5
109.4/120.1
42.1/ 42.1
59.1/ 61.6
69.5/ 73.7
83.7/ 90.2
97.0/105.2
111.1/121.8
19.7
28.7
37.0
40.7
54.4
58.1
20.5
29.5
37.8
41.5
55.2
58.9
15.8
16.4
43.6/ 43.6
70.7/ 74.8
85.2/ 91.7
108.1/118.2
126.8/139.8
153.9/171.1
48.4/ 48.4
75.5/ 79.6
90.0/ 96.5
112.9/123.0
131.6/144.6
158.7/175.9
21.3
42.1
46.0
63.0
70.9
84.0
23.5
44.3
48.2
65.2
73.1
86.2
17.1
38.5
59.7
18.9
40.2
61.5
45/ 45††
60/ 60††
70/ 80
90/ 90
100/110
110/125
45/ 45††
60/ 70
70/ 80
90/100
100/110
125/125
20††
30††
40††
45††
60††
60††
25††
30††
40††
45††
60††
60††
20††
20††
45/ 45††
80/ 80
90/100
110/125
150/150
175/175
50/ 50††
80/ 80
90/100
125/125
150/150
175/200
25††
45††
50††
70
80
90
25††
45††
50††
70
80
90
20††
40††
60††
20††
45††
70
40/ 40
56/ 58
65/ 69
78/ 84
90/ 98
103/113
42/ 42
58/ 60
67/ 71
80/ 86
92/100
105/115
19
28
35
39
51
55
20
29
36
40
52
56
16
16
46/ 46
71/ 75
85/ 91
106/115
123/135
148/164
52/ 52
77/ 81
90/ 96
111/120
128/140
153/169
23
42
45
61
68
80
25
44
48
63
71
83
18
38
57
20
40
59
195/195
208/211
217/220
228/233***
239/245***
250/259***
214/214
227/229
236/239
247/252***
258/264***
269/278***
97
104
111
114
125
128
107
114
121
124
134
137
78
85
234/234
256/259
267/272***
285/294***
300/311***
322/336***
277/277
299/302***
311/316***
329/337***
344/354***
366/379***
110
127
130
143
150
160***
132
148
151
165
171
182***
99
116
133
116
133
150
ELECTRICAL DATA (cont)
UNIT
548F
NOMINAL
V-PH-Hz
IFM
TYPE
VOLTAGE
RANGE
Min
Max
COMPRESSOR
(each)
RLA
LRA
OFM
FLA
IFM
FLA
STD
187
254
16.0
137.0
1.4
5.8
HIGH-STATIC
187
254
16.0
137.0
1.4
10.6
STD
414
508
8.3
69.0
0.7
2.6
HIGH-STATIC
414
508
8.3
69.0
0.7
4.8
STD
518
632
6.4
58.0
0.7
2.6
HIGH-STATIC
518
632
6.4
58.0
0.7
4.8
STD
187
254
17.2
124.0
1.4
5.8
ALT
187
254
17.2
124.0
1.4
7.5
HIGH-STATIC
187
254
17.2
124.0
1.4
15.0
STD
414
508
8.6
59.6
0.7
2.6
ALT
414
508
8.6
59.6
0.7
3.4
HIGH-STATIC
414
508
8.6
59.6
0.7
7.4
STD
518
632
6.9
49.4
0.7
2.6
ALT
518
632
6.9
49.4
0.7
3.4
HIGH-STATIC
518
632
6.9
49.4
0.7
7.4
208/230-3-60
102
(81/2 Tons)
460-3-60
575-3-60
208/230-3-60
120
(10 Tons)
460-3-60
575-3-60
NOTE: Legend and Notes for Electrical Data are on page 64.
63
ELECTRIC
HEAT*
Nominal
kW**
—
7.8/10.5
12.0/16.0
18.6/24.8
24.0/32.0
31.8/42.4
—
7.8/10.5
12.0/16.0
18.6/24.8
24.0/32.0
31.8/42.4
—
14.0
16.5
27.8
33.0
41.7
—
14.0
16.5
27.8
33.0
41.7
—
17.0
34.0
—
17.0
34.0
—
7.8/10.4
12.0/16.0
24.0/32.0
31.8/42.4
37.6/50.0
—
7.8/10.4
12.0/16.0
24.0/32.0
31.8/42.4
37.6/50.0
—
7.8/10.4
12.0/16.0
24.0/32.0
31.8/42.4
37.6/50.0
—
16.5
27.8
33.0
41.7
50.0
—
16.5
27.8
33.0
41.7
50.0
—
16.5
27.8
33.0
41.7
50.0
—
17.0
34.0
51.0
—
17.0
34.0
51.0
—
17.0
34.0
51.0
POWER SUPPLY
DISCONNECT
SIZE†
FLA
MCA
MOCP
FLA
LRA
—
21.7/ 25.0
33.3/ 38.5
51.6/ 59.7
66.6/ 77.0
88.3/102.0
—
21.7/ 25.0
33.3/ 38.5
51.6/ 59.7
66.6/ 77.0
88.3/102.0
—
16.7
19.8
33.4
39.7
50.2
—
16.7
19.8
33.4
39.7
50.2
—
17.1
34.1
—
17.1
34.1
—
21.7/ 25.0
33.3/ 38.5
66.6/ 77.0
88.3/102.0
104.4/120.3
—
21.7/ 25.0
33.3/ 38.5
66.6/ 77.0
88.3/102.0
104.4/120.3
—
21.7/ 25.0
33.3/ 38.5
66.6/ 77.0
88.3/102.0
104.4/120.3
—
19.8
33.4
39.7
50.2
60.1
—
19.8
33.4
39.7
50.2
60.1
—
19.8
33.4
39.7
50.2
60.1
—
17.1
34.1
51.2
—
17.1
34.1
51.2
—
17.1
34.1
51.2
44.6/ 49.9
76.5/ 80.7
91.0/ 97.5
113.9/124.0
132.7/145.7
154.8/176.9
49.2/ 54.2
81.3/ 85.5
95.8/102.3
118.7/128.8
137.5/150.5
164.6/181.7
24.9
45.7
49.6
66.6
74.5
87.6
24.9
47.9
51.8
68.8
76.7
89.8
18.4
40.7
62.0
20.6
42.5
63.7
52.1/ 52.1
79.2/ 83.4
93.7/100.2
135.4/148.4
162.5/179.6
182.6/172.4
53.8/ 53.8
80.9/ 85.1
95.4/101.9
137.1/150.1
164.2/181.3
184.3/174.1
61.3/ 61.3
88.4/ 92.6
102.9/109.4
144.6/157.6
171.7/188.8
191.8/181.6
25.5
50.3
67.3
75.2
88.3
85.6
26.3
51.1
68.1
76.0
89.1
86.4
30.3
55.1
72.1
80.0
93.1
90.4
20.5
41.8
63.1
71.7
21.1
42.5
63.7
72.3
24.3
45.7
66.9
75.5
50/ 50††
80/ 90
100/100
125/125
150/150
175/200
60/ 60††
90/ 90
100/110
125/150
150/175
175/200
25††
50††
50††
70
80
90
30††
50††
60††
70
80
90
20††
45††
70
25††
45††
70
60/ 60††
80/ 90
100/110
150/150
175/200
200/200
60/ 60††
90/ 90
100/110
150/175
175/200
200/200
70/ 70
90/100
110/110
150/175
175/200
200/200
30††
60††
80
80
90
90
30††
60††
70
80
90
90
35††
60††
80
80
100
100
25††
45††
70
80
25††
45††
70
80
25††
50††
70
80
52/ 52
77/ 81
91/ 96
112/121
129/144
154/170
58/ 58
83/ 86
96/102
117/126
134/146
159/175
26
45
49
65
72
84
29
48
51
67
74
86
20
40
60
22
42
62
55/ 55
80/ 84
93/ 99
132/144
157/172
175/193
57/ 57
82/ 86
93/101
134/145
158/174
177/195
66/ 66
91/ 94
104/110
142/154
167/183
186/204
27
50
65
73
85
96
28
51
66
73
85
97
32
55
71
78
90
102
22
41
61
80
22
42
62
81
26
46
65
85
326/326
348/351
359/364
377/386
392/403
414/428
369/369
391/394***
403/408***
421/429***
436/446***
458/471***
164
181
184
197
204
214***
186
202
205
219
225
236***
137
154
171
154
171
188
300/300
322/325***
333/338***
366/377***
388/402***
404/420***
319/319
341/344***
352/357***
385/396***
407/421***
423/439***
367/367
389/392***
400/405***
433/444***
455/459***
471/487***
145
165
178
185
195***
205***
185
204
218
224
235***
245***
179
198
212
218
229***
239***
120
137
154
171***
151
168
185
202***
146
163
180
198***
50TFQ004-012
548F036-120
UNITS WITH ELECTRICAL CONVENIENCE OUTLET (cont)
50TFQ004-012
548F036-120
ELECTRICAL DATA (cont)
LEGEND AND NOTES FOR ELECTRICAL TABLES
FLA —
HACR —
IFM
—
LRA —
MCA —
MOCP —
NEC —
OFM —
RLA —
Example: Supply voltage is 460-3-60.
LEGEND
Full Load Amps
Heating, Air Conditioning and Refrigeration
Indoor Fan Motor
Locked Rotor Amps
Minimum Circuit Amps
Maximum Overcurrent Protection
National Electrical Code
Outdoor Fan Motor
Rated Load Amps
AB = 452 v
BC = 464 v
AC = 455 v
Average Voltage =
=
452 + 464 + 455
3
1371
3
= 457
Determine maximum deviation from average voltage.
(AB) 457 – 452 = 5 v
(BC) 464 – 457 = 7 v
(AC) 457 – 455 = 2 v
Maximum deviation is 7 v.
*Heaters are field installed only.
†Used to determine minimum disconnect size per NEC.
**Heater capacity (kW) is based on heater voltage of 208 v, 240 v,
480 v, and 575 v. If power distribution voltage to unit varies from rated
heater voltage, heater kW will vary accordingly.
††Fuse or HACR circuit breaker.
***Optional disconnect switch is unavailable.
Determine percent of voltage imbalance.
7
% Voltage Imbalance = 100 x
457
= 1.53%
This amount of phase imbalance is satisfactory as it is below the
maximum allowable 2%.
IMPORTANT: If the supply voltage phase imbalance is more than
2%, contact your local electric utility company immediately.
NOTES:
1. In compliance with NEC requirements for multimotor and combination load equipment (refer to NEC Articles 430 and 440), the overcurrent protective device for the unit shall be fuse or HACR breaker.
2. Unbalanced 3-Phase Supply Voltage
Never operate a motor where a phase imbalance in supply voltage is
greater than 2%. Use the following formula to determine the percent
of voltage imbalance.
% Voltage Imbalance
max voltage deviation from average voltage
= 100 x
average voltage
64
TYPICAL WIRING SCHEMATIC
—
—
—
—
—
—
—
—
—
—
—
—
—
—
ER
FSS
FPT
FU
GND
HC
HPS
HR
IFC
IFM
LPS
LSM
MTR
OAT
OFM
P
PL
QT
R
RAT
RVS
SAT
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
ST
SW1
SW2
SW3
—
—
—
—
SW4
—
TB
TC
—
—
TH
—
TRAN —
50TFQ004-012
548F036-120
AHA
AWG
C
CAP
CB
CC
CH
COMP
D
DB
DFT
EC
ECON
EPS
LEGEND
Adjustable Heat Anticipator
American Wire Gage
Contactor, Compressor
Capacitor
Circuit Breaker
Cooling Capacitor
Crankcase Heater
Compressor Motor
Diode
Defrost Board
Defrost Thermostat
Enthalpy Control
Economizer
Emergency Power Supply
(Nine-Volt Battery)
Economizer Relay
Filter Status Switch
Freeze-Up Protection Thermostat
Fuse
Ground
Heater Contactor (Strip Heat)
High-Pressure Switch
Heater Relay
Indoor-Fan Contactor
Indoor-Fan Motor
Low-Pressure Switch
Limit Switch (Manual Reset)
Motor
Outdoor-Air Thermostat
Outdoor-Fan Motor
Plug
Plug Assembly
Quadruple Terminal
Relay
Return-Air Thermostat
Reversing Valve Solenoid
Supply-Air
Thermostat
Start Thermistor
Switch Fully Open
Switch Fully Closed
Switch Min.
Vent Position
Switch Max.
Vent Position
Terminal Block
ThermostatCooling
ThermostatHeating
Transformer
Field Splice
Marked Wire
NOTES:
1. If any of the original wire furnished
must be replaced, it must be
replaced with Type 90 C wire or its
equivalent.
2. Thermostat: HH07AT170, 172, 174.
Subbase: HH93AZ176.
3. Set heat anticipator at .8 amp for
first stage and .3 amp for second
stage.
4. Use copper conductors only.
5. Use copper, copper-clad aluminum
or aluminum conductors.
6.
CB
VOLTAGE
RATING MFG. PT. NO. MUST
TRIP
POTTER &
AMPS
BRUMFIELD
24V
W28X-1024-3.2 3.2
Terminal (Marked)
Terminal (Unmarked)
Terminal Block
Splice
Splice (Marked)
Factory Wiring
Field Control Wiring
Field Power Wiring
Accessory or
Optional Wiring
To indicate common
potential only. Not to
represent wiring.
548F036-072
65
50TFQ004-012
548F036-120
TYPICAL WIRING SCHEMATIC (cont)
7 1/2 AND 8 1/2 TON UNITS ONLY
24VAC
ACTUATOR
BRN
24COM
50DK509044
GRN
COM
60
80
C 100
D
30º
40º
MIN
POS (X)
40
20º A
B
0
AD-DME1711-1
20
1200 50º
G
AO
CO SP MECH CLG ECON
(PPM) LOCKOUT SP
BLK
1400
Y2
10º
Y1
YEL
1000
OFF
BLU
800
B1
EconoMi$er
ORN
STEPPER
DRIVE
CL01
CL02
50DK508232
GND
GRY
50DK508234
OAT
TAN
COM
VIO
OAH
WHT
+15V
RED
RAT
TAN
COM
VIO
RAM
WHT
+15V
RED
OAT
USED FORMOUTDOOR
AIR ENTHALPY
RED
STATUS
CONFIG
LEGEND
RED
2
3
BRN
4
GRY 5
VIO
RAT
CO2 +
1
BLU
BLK
VIO
WHT
RED
1
2
3
ORN 9
10
LED
11
FIELD INSTALLED
OPTION
12
12-PIN
FEMALE
12 8 4
WHT/GRY
11 7
BLK/GRY
10 6
9
BRN
5
3
2
1
MOLEX
CONNECTOR
NOT USED
CONNECTOR CABLE
548F090-120
66
—
—
—
—
—
—
—
—
LPS
LSM
MCA
MTR
OAT
OFC
OFM
P
PL
QT
R
RAT
RVS
SAT
SW1
SW2
SW3
SW4
TB
TC
TH
TRAN
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Field Splice
Terminal (Marked)
PNK
COM
PL6
3-PIN
MOLEX
FU
GND
HC
HPS
HR
IFC
IFM
IFMOVL
Marked Wire
YEL
WHT/YEL
BLK/YEL
—
—
—
8
VIO
COM
EQUIP
ER
FPT
Adjustable Heat Anticipator
American Wire Gage
Contactor, Compressor
Capacitor
Circuit Breaker
Cooling Capacitor
Crankcase Heater
Compressor Lockout
Compressor Motor
Diode
Defrost Board
Defrost Thermostat
Enthalpy Control
Economizer
Emergency Power Supply
(Nine-Volt Battery)
Equipment
Economizer Relay
Freeze-Up Protection
Thermostat
Fuse
Ground
Heater Contactor (Strip Heat)
High-Pressure Switch
Heater Relay
Indoor-Fan Contactor
Indoor-Fan Motor
Indoor-Fan Motor
Overload Switch
Low-Pressure Switch
Limit Switch (Manual Reset)
Minimum Circuit Amps
Motor
Outdoor-Air Thermostat
Outdoor-Fan Contactor
Outdoor-Fan Motor
Plug
Plug Assembly
Quadruple Terminal
Relay
Return-Air Thermostat
Reversing Valve Solenoid
Supply-Air Thermostat
Switch Fully Open
Switch Fully Closed
Switch Min. Vent Position
Switch Max. Vent Position
Terminal Block
Thermostat-Cooling
Thermostat-Heating
Transformer
7
DAT
COM
REM POT
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
6
PNK
CO2 (COM)
AHA
AWG
C
CAP
CB
CC
CH
CLO
COMP
D
DB
DFT
EC
ECON
EPS
Terminal (Unmarked)
Terminal Block
Splice
Splice (Marked)
Factory Wiring
Field Control Wiring
Field Power Wiring
Accessory or
Optional Wiring
To indicate common
potential only. Not to
represent wiring.
MODEL NUMBER NOMENCLATURE
(ODS Model Number)
549B
E
X
090
000
AA
549B – Single-Packaged High-Efficiency
Heat Pump Unit
Factory-Installed Options
See 549B price pages for
factory-installed option codes
Voltage Designation
E – 460-3-60
J – 208/230-1-60
P – 208/230-3-60
X – No Heat Installed
(Field-installed electric heaters available)
Nominal Tons
036 – 3
048 – 4
060 – 5
072 – 6
090 – 7-1/2
120 – 10
—
50TFQ004-012
549B036-120
ODS
Electric Heaters
000 – No factory-installed electric heaters
LEGEND
Order Distribution System
ARI* CAPACITY RATINGS
549B036-060
UNIT
549B
NOMINAL
TONS
036
048
060
3
4
5
HEATING (High Temp)
Cap.
HSPF†
(Btuh)
34,000
7.6
46,000
7.6
60,000
7.6
COOLING
Cap.
(Btuh)
36,000
46,000
60,000
SEER†
12.0
12.0
11.9
SOUND
RATING
(decibels)
76
76
80
549B072-120
UNIT
549B
NOMINAL
TONS
072
090
120
6
71 / 2
10
Cap.
COP
EER
HSPF
IPLV
SEER
—
—
—
—
—
—
COOLING
Cap.
(Btuh)
71,000
88,000
116,000
EER
10.5
10.3
10.3
HEATING
(High)
Cap.
(Btuh)
69,000
85,000
114,000
COP
3.4
3.3
3.3
HEATING
(Low)
Cap.
COP
(Btuh)
37,000
2.2
48,000
2.2
64,000
2.2
SOUND
RATING
(decibels)
IPLV
80
82
84
—
—
10.4
IPLV Standard: 80 F db, 67 F wb indoor entering-air temperature and
80 F db outdoor entering-air temperature.
High-Temp Heating Standard: 70 F db indoor entering-air temperature
and 47 F db, 43 F wb outdoor entering-air temperature.
Low-Temp Heating Standard: 70 F db indoor entering-air temperature
and 17 F db, 15 F wb outdoor entering-air temperature.
LEGEND
Net Capacity (Btuh)
Coefficient of Performance
Energy Efficiency Ratio
Heating Seasonal Performance Factor
Integrated Part-Load Values
Seasonal Energy Efficiency Ratio
*Air Conditioning and Refrigeration Institute.
†Applies only to units with capacity of 60,000 Btuh or less.
NOTE:
Rated in accordance with ARI Standard 210/240-95 and 270-95. Ratings are net values, reflecting effects of circulating fan heat. Supplementary electric heat is not included. Ratings based on:
Cooling Standard: 80 F db (dry bulb), 67 F wb (wet bulb) indoor
entering-air temperature and 95 F db outdoor entering-air temperature.
67
PHYSICAL DATA
50TFQ004-012
549B036-120
549B036-072
BASE UNIT 549B
NOMINAL CAPACITY (tons)
OPERATING WEIGHT (lb)
Unit
Durablade Economizer
EconoMi$er
Roof Curb
COMPRESSOR
Quantity
Oil (oz)
REFRIGERANT TYPE
Operating Charge (lb)
OUTDOOR FAN
Quantity...Diameter (in.)
Nominal Cfm
Motor Hp...Rpm
OUTDOOR COIL
Rows...Fins/in.
Total Face Area (sq ft)
INDOOR FAN
Size (in.)
Type Drive
Nominal Cfm
Maximum Continuous Bhp
Motor Frame
Fan Rpm
Motor Bearing Type
Maximum Fan Rpm
Motor Pulley Pitch Diameter A/B (in.)
Fan Pulley Pitch Diameter (in.)
Belt — Type...Length (in.)
Pulley Center Line Distance (in.)
Speed Change per Full Turn of
Movable Pulley Flange (rpm)
Movable Pulley Maximum Full Turns
From Closed Position
Factory Setting Full Turns Open
Factory Speed Setting (rpm)
Fan Shaft Diameter at Pulley (in.)
INDOOR COIL
Rows...Fins/in.
Total Face Area (sq ft)
HIGH-PRESSURE SWITCH (psig)
Standard Compressor Internal Relief
Cutout
Reset (Auto.)
LOSS-OF-CHARGE/LOW-PRESSURE SWITCH
(Liquid Line) (psig)
Cutout
Reset (Auto.)
FREEZE PROTECTION THERMOSTAT
Opens (F)
Closes (F)
OUTDOOR-AIR INLET SCREENS
Quantity...Size (in.)
RETURN-AIR FILTERS
Quantity...Size (in.)
036
3
048
4
060
5
072
6
500
34
47
115
550
34
47
115
590
34
47
115
630
34
47
115
1
42
1
53
1
50
1
60
6.9
9.6
10.8
17.7
Scroll
R-22
Propeller
1...22
1...22
1...22
1...22
3500
3500
3500
3500
1
1
1
/8...825
/4...1100
/4...1100
8...825
Enhanced Copper Tubes, Aluminum Fins, Fixed Orifice Metering Device
1...17
2...17
2...17
2...17
14.58
16.53
16.53
16.53
Centrifugal
10 x 10
10 x 10
10 x 10
10 x 10
Belt
Belt
Belt
Belt
1200
1600
2000
2400
1.20
1.20
1.80
2.40
48
48
48
56
760-1090
840-1185
1020-1460
1120-1585
Ball
Ball
Ball
Ball
1725
1725
1725
1725
1.9/2.9
1.9/2.9
2.4/3.4
2.4/3.4
4.5
4.0
4.0
3.7
A...33
A...33
A...38
A...38
10.0-12.4
10.0-12.4
14.7-15.5
14.7-15.5
1/
65
70
93
93
5
5
6
5
3
3
3
3
890
980
1240
1305
5/
5/8
5/8
5/8
8
Enhanced Copper Tubes, Aluminum Double Wavy Fins, Fixed Orifice Metering Device
2...15
2...15
4...15
4...15
5.5
5.5
5.5
5.5
625
428
320
7±3
22 ± 5
30
45
Cleanable
1...20 x 24 x 1
Throwaway
2...16 x 25 x 2
LEGEND
Bhp — Brake Horsepower
68
PHYSICAL DATA (cont)
549B090,120
090
71/2
120
10
870
44
62
223
1000
44
62
223
Scroll
2
57
R-22
9.1
9.6
10.6
9.9
Propeller
2...22
2...22
6500
6500
1/ ...1100
1/ ...1100
4
4
Enhanced Copper Tubes, Aluminum Fins, Fixed Orifice Metering Device
2...17
2...17
20.5
25.1
Centrifugal
15 x 15
15 x 15
Belt
Belt
3000
4000
2.90
4.20
56
56
725-925
860-1080
Ball
Ball
1725
2100
3.4/4.4
8.0
A...51
16.75-19.25
1
4.0/5.0
8.0
A...51
15.85-17.50
1
50
45
5
5
5
5
725
860
Enhanced Copper Tubes, Aluminum Double Wavy Fins, Fixed Orifice Metering Device
3...15
4...15
8.89
11.11
625
428
320
7±3
22 ± 5
30
45
Cleanable
1...20 x 25 x 1
1...16 x 25 x 1
Throwaway
Quantity...Size (in.)
RETURN-AIR FILTERS
Quantity...Size (in.)
2
57
4...16 x 20 x 2
LEGEND
Bhp — Brake Horsepower
69
4...20 x 20 x 2
50TFQ004-012
549B036-120
BASE UNIT 549B
NOMINAL CAPACITY (tons)
OPERATING WEIGHT (lb)
Unit
Durablade Economizer
EconoMi$er
Roof Curb
COMPRESSOR
Quantity
Oil (oz) (each compr)
REFRIGERANT TYPE
Operating Charge (lb)
Circuit 1
Circuit 2
OUTDOOR FAN
Quantity...Diameter (in.)
Nominal Cfm
Motor Hp...Rpm
OUTDOOR COIL
Rows...Fins/in.
Total Face Area (sq ft)
INDOOR FAN
Size (in.)
Type Drive
Nominal Cfm
Maximum Continuous Bhp
Motor Frame
Fan Rpm Range
Motor Bearing Type
Maximum Fan Rpm
Motor Pulley Pitch Diameter
A/B (in.)
Fan Pulley Pitch Diameter (in.)
Belt — Type...Length (in.)
Pulley Center Line Distance (in.)
Fan Shaft Diameter at Pulley (in.)
Speed Change per Full Turn of
Movable Pulley Flange (rpm)
Movable Pulley Maximum Full
Turns from Closed Position
Factory Setting — Full Turns Open
Factory Speed Setting (rpm)
INDOOR COIL
Rows...Fins/in.
Total Face Area (sq ft)
HIGH-PRESSURE SWITCH (psig)
Standard Compressor Internal Relief
Cutout
Reset (Auto.)
LOSS-OF-CHARGE/LOW-PRESSURE SWITCH
(Liquid Line) (psig)
Cutout
Reset (Auto.)
FREEZE PROTECTION THERMOSTAT
Opens (F)
Closes (F)
OUTDOOR-AIR INLET FILTER
549B036-072
50TFQ004-012
549B036-120
BASE UNIT DIMENSIONS
70
BASE UNIT DIMENSIONS (cont)
549B090,120
50TFQ004-012
549B036-120
71
ACCESSORY DIMENSIONS
CONNECTOR
PKG. ACCY.
CRBTMPWR001A00
CRBTMPWR002A00
CRBTMPWR003A00
B
1′-911/16″
[551]
C
1′-4″
[406]
D ALT
DRAIN HOLE
13/4″
[44.5]
CRBTMPWR004A00
GAS
POWER
CONTROL
3/ ″
4
3/ ″ [19] NPT
4
11/4″ [31.7]
1/ ″
2
[19] NPT
1/ ″
2
[12.7] NPT
3/ ″
4
[19] NPT
3/ ″
4
CRRFCURB001A00
[12.7]
[19] NPT
11/4″ [31.7]
ROOF CURB
ACCESSORY
CRRFCURB002A00
1/ ″
2
[12.7]
A
UNIT SIZE
1′-2″
[356]
2′-0″
[610]
549B036-072
NOTES:
1. Roof curb accessory is shipped disassembled.
2. Insulated panels.
3. Dimensions in [ ] are in millimeters.
4. Roof curb: galvanized steel.
5. Attach ductwork to curb (flanges of duct rest on curb).
6. Service clearance: 4 ft on each side.
7.
Direction of airflow.
50TFQ004-012
549B036-120
8. Connector packages CRBTMPWR001A00 and
002A00 are for thru-the-curb type gas. Packages
CRBTMPWR003A00 and 004A00 are for thru-thebottom type gas connections.
TO ENSURE AIRTIGHT CONNECTION.
PLACE UNIT AS CLOSE TO THIS
END AS POSSIBLE
TO ENSURE AIRTIGHT CONNECTION.
PLACE UNIT AS CLOSE TO THIS
END AS POSSIBLE
549B036-072
72
ACCESSORY DIMENSIONS (cont)
CONNECTOR
PKG. ACCY.
B
CRBTMPWR001A00
CRBTMPWR002A00
CRBTMPWR003A00
2′-87/16″
[827]
C
1′-1015/16″
[583]
CRBTMPWR004A00
D ALT
DRAIN
HOLE
GAS
POWER
CONTROL
3/ ″ [19] NPT
4
11/4″ [31.7]
1/2″
[12.7] NPT
13/4″
[44.5]
3/4″
[19] NPT
1/ ″
2
[12.7] NPT
3/4″
[19] NPT
3/ ″
4
[19] NPT
11/4″
[31.7]
1/2″
[12.7] NPT
ROOF CURB
“A”
UNIT SIZE
ACCESSORY
CRRFCURB003A00 1′-2″ [356]
549B090,120
CRRFCURB004A00 2′-0″ [610]
NOTES:
1. Roof curb accessory is shipped disassembled.
2. Insulated panels: 1-in. thick polyurethane foam,
13/4 lb density.
3. Dimensions in [ ] are in millimeters.
4. Roof curb: 16-gage steel.
5. Attach ductwork to curb (flanges of duct rest on
curb).
6. Service clearance 4 ft on each side.
7.
Direction of airflow.
8. Connector packages CRBTMPWR001A00 and
2A00 are for thru-the-curb gas type. Packages
CRBTMPWR003A00 and 4A00 are for thruthe-bottom type gas connections.
50TFQ004-012
549B036-120
TO ENSURE AN AIRTIGHT CONNECTION,
PLACE UNIT ON CURB AS CLOSE TO
DUCT END AS POSSIBLE.
TO ENSURE AN AIRTIGHT CONNECTION,
PLACE UNIT ON CURB AS CLOSE TO
DUCT END AS POSSIBLE.
549B090,120
73
50TFQ004-012
549B036-120
SELECTION PROCEDURE (WITH 549B048 EXAMPLE)
I DETERMINE COOLING AND HEATING REQUIREMENTS AT DESIGN CONDITIONS.
Given:
Required Cooling Capacity (TC). . . . . . . . . . . 38,000 Btuh
Sensible Heat Capacity (SHC) . . . . . . . . . . . . 24,000 Btuh
Required Heating Capacity. . . . . . . . . . . . . . . 35,000 Btuh
Outdoor Entering-Air Temperature . . . . . . . . . . . . . . . 95 F
Outdoor-Air Winter Design Temperature . . . . . . . . . . 0° F
Indoor-Air Winter Design Temperature . . . . . . . . . . . . 70 F
Indoor Entering-Air
Temperature . . . . . . . . 80 F edb (entering air, dry bulb),
67 F ewb (entering air, wet bulb)
Indoor-Air Quantity . . . . . . . . . . . . . . . . . . . . . . . 1600 cfm
External Static Pressure . . . . . . . . . . . . . . . . . . 0.45 in. wg
Electrical Characteristics (V-Ph-Hz) . . . . . . . . . . 230-3-60
II SELECT UNIT BASED ON REQUIRED COOLING
CAPACITY.
Enter Cooling Capacities table at outdoor entering temperature of 95 F, indoor air entering at 1600 cfm and 67 F
ewb. The 549B048 unit will provide a total cooling
capacity of 47,400 Btuh and a sensible heat capacity of
32,800 Btuh.
For indoor-air temperature other than 80 F edb, calculate
sensible heat capacity correction, as required, using the
formula found in Note 3 following the cooling capacities
tables.
NOTE: Unit ratings are gross capacities and do not include
the effect of indoor-fan motor heat. To calculate net capacities, see Step V.
III SELECT ELECTRIC HEAT.
Enter the Instantaneous and Integrated Heating Ratings
table at 1600 cfm. At 70 F return indoor air and 0° F air
entering outdoor coil, the integrated heating capacity is
20,400 Btuh. (Select integrated heating capacity value
since deductions for outdoor-coil frost and defrosting have
already been made. No correction is required.)
The required heating capacity is 35,000 Btuh. Therefore,
14,600 Btuh (35,000 – 20,400) additional electric heat is
required.
Determine additional electric heat capacity in kW.
14,600 Btuh
3413 Btuh/kW
= 4.3 kW of heat required.
Enter the Electric Heating Capacities table for 549B048 at
208/230, 3 phase. The 6.5-kW heater at 240 v most
closely satisfies the heating required. To calculate kW at
230 v, use the Multiplication Factors table.
6.5 kW x .92 = 5.98 kW
6.5 kW x .92 x 3413 = 20,410 Btuh
Total unit heating capacity is 40,810 Btuh (20,400 +
20,410).
74
IV DETERMINE FAN SPEED AND POWER REQUIREMENTS AT DESIGN CONDITIONS.
Before entering Fan Performance tables, calculate the
total static pressure required based on unit components.
From the given and the Pressure Drop tables, find:
External static pressure
.45 in. wg
Durablade economizer
.05 in. wg
Electric heat
.09 in. wg
Total static pressure
.59 in. wg
Enter the Fan Performance table for 549B048 vertical discharge. At 1600 cfm and 230-v, the standard motor will
deliver 1.2 in. wg static pressure and 1.15 brake horsepower (bhp). This will adequately handle job requirements.
NOTE: Convert bhp to Watts using the formula below and
the motor efficiency found in the Indoor-Fan Motor Data
table.
For this example:
746 x Bhp
Watts =
Motor Efficiency
Watts =
746 x 1.15
.75
Watts = 1144
V DETERMINE NET CAPACITIES.
Capacities are gross and do not include the effect of
indoor-fan motor (IFM) heat.
Determine net cooling capacity as follows:
Net capacity = Total capacity – IFM heat
= 47,400 Btuh – (1144 Watts x 3.413
Btuh/Watts)
= 47,400 Btuh – 3904 Btuh
= 43,496
Net sensible capacity = 32,800 Btuh – 3904 Btuh
= 28,896 Btuh
Integrated heating capacity is maximum (instantaneous)
capacity less the effect of frost on the outdoor coil and the
heat required to defrost it. Therefore, net capacity is equal
to 40,810 Btuh, the total heating capacity determined in
Step III.
PERFORMANCE DATA
COOLING CAPACITIES
Standard Ratings
549B036 (3 Tons)
Temp (F)
Outdoor
Entering Air
(Edb)
75
85
95
105
115
62
34.1
29.0
2.13
32.4
28.1
2.40
30.6
27.2
2.69
28.8
26.3
3.01
27.9
25.8
3.36
26.3
25.0
3.74
62
45.0
36.7
2.82
43.7
36.2
3.19
42.1
35.6
3.58
40.5
35.1
4.04
38.2
34.0
4.50
36.1
33.0
5.02
Indoor Entering Air — Cfm/Bf
1600/0.16
Indoor Entering Air — Ewb (F)
72
67
62
55.6
49.6
46.7
27.3
32.6
40.5
2.96
2.87
2.84
53.9
49.1
45.6
26.7
33.4
40.4
3.32
3.25
3.21
47.4
44.0
51.8
26.0
32.8
39.9
3.71
3.65
3.61
50.0
45.3
42.2
25.7
32.0
39.5
4.16
4.08
4.05
46.4
43.5
39.9
23.6
31.9
38.6
4.59
4.56
4.52
43.9
41.2
37.7
23.0
31.3
37.6
5.11
5.08
5.05
62
52.9
48.1
3.58
50.8
47.1
4.03
47.4
45.5
4.49
43.6
43.6
5.00
40.8
40.8
5.59
40.4
40.3
6.21
Indoor Entering Air — Cfm/Bf
2000/0.05
Indoor Entering Air — Ewb (F)
72
67
62
73.6
68.2
58.4
37.8
49.6
57.6
3.80
3.80
3.69
71.0
65.4
56.5
37.1
48.5
56.4
4.24
4.23
4.12
62.2
53.5
68.8
36.6
47.3
53.5
4.70
4.60
4.75
65.6
58.1
50.2
35.6
45.8
50.2
5.27
5.21
5.12
62.1
52.6
46.8
34.6
43.7
46.8
5.87
5.77
5.70
56.8
46.3
43.3
33.0
41.3
43.3
6.50
6.36
6.32
900/0.13
72
41.7
20.3
2.22
40.5
19.9
2.49
39.1
19.4
2.80
37.6
18.8
3.13
35.9
18.2
3.49
34.2
17.6
3.88
67
38.4
25.0
2.17
37.2
24.6
2.45
35.9
24.1
2.75
33.9
23.3
3.08
31.9
22.5
3.43
30.5
21.9
3.81
1500/0.19
72
44.4
23.2
2.25
43.1
23.1
2.53
42.0
23.0
2.85
40.1
22.3
3.18
38.3
21.8
3.54
36.3
21.4
3.92
67
41.4
30.6
2.21
40.2
30.5
2.49
38.7
30.2
2.80
37.0
29.7
3.13
35.3
29.0
3.50
33.2
28.2
3.88
62
36.8
36.8
2.18
37.2
36.3
2.45
35.8
35.8
2.76
34.6
34.5
3.09
32.5
32.5
3.45
31.0
31.0
3.84
549B048 (4 Tons)
Temp (F)
Outdoor
Entering Air
(Edb)
75
85
95
105
115
125
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
1200/0.13
72
53.1
25.1
2.92
51.9
24.9
3.29
50.5
24.3
3.70
48.2
23.6
4.14
45.1
22.1
4.57
43.2
21.7
5.10
67
48.7
30.7
2.86
47.3
30.2
3.22
45.5
29.5
3.62
43.7
28.9
4.06
42.1
28.7
4.55
39.5
27.7
5.05
2000/0.19
72
56.1
28.2
2.96
54.4
27.7
3.32
52.3
27.0
3.72
50.8
27.2
4.18
46.0
23.8
4.58
44.9
24.5
5.13
67
50.7
35.1
2.88
50.2
36.1
3.27
47.4
34.3
3.64
46.3
34.8
4.10
44.4
34.4
4.57
41.8
33.9
5.09
62
48.4
44.6
2.87
46.9
44.2
3.23
44.6
42.4
3.61
43.2
42.4
4.06
41.3
41.3
4.54
39.6
39.6
5.08
549B060 (5 Tons)
Temp (F)
Outdoor
Entering Air
(Edb)
75
85
95
105
115
125
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
1500/0.03
72
70.4
34.2
3.75
68.5
33.6
4.20
65.8
32.8
4.69
63.0
31.7
5.22
59.4
30.6
5.83
53.8
28.7
6.44
67
62.3
42.0
3.73
58.9
40.6
4.16
55.3
39.2
4.63
51.4
37.6
5.13
48.2
36.4
5.70
44.6
35.0
6.30
2500/0.07
72
75.5
41.1
3.83
72.7
40.3
4.27
70.5
40.2
4.78
67.1
39.1
5.30
63.7
38.4
5.89
59.5
37.3
6.54
75
67
69.1
53.8
3.74
66.9
53.9
4.20
64.0
53.1
4.68
60.7
52.1
5.22
55.5
50.3
5.81
47.8
46.9
6.40
62
64.9
64.8
3.75
62.7
62.6
4.17
60.3
60.2
4.67
57.5
57.5
5.20
52.6
52.5
5.77
47.3
47.3
6.39
Bf
Edb
Ewb
kW
SHC
TC
—
—
—
—
—
—
LEGEND
Bypass Factor
Entering Dry-Bulb
Entering Wet-Bulb
Compressor Motor Power Input
Sensible Heat Capacity (1000 Btuh) Gross
Total Capacity (1000 Btuh) Gross
NOTES:
1. Direct interpolation is permissible. Do
extrapolate.
2. The following formulas may be used:
sensible capacity
(Btuh)
tldb = tedb –
1.10 x cfm
tlwb
=
Wet-bulb temperature
corresponding to enthalpy of air
leaving evaporator coil (hlwb)
hlwb
=
hewb
not
total capacity
(Btuh)
4.5 x cfm
–
Where: hewb = Enthalpy of air entering evaporator
coil
3. The SHC is based on 80 F edb temperature of air
entering evaporator coil.
Below 80 F edb, subtract (corr factor x cfm) from
SHC.
Above 80 F edb, add (corr factor x cfm) to SHC.
ENTERING AIR
DRY-BULB TEMP (F)
BYPASS
FACTOR
(BF)
79
78
77
76
75
81
82
83
84
85
.05
.10
.20
.30
1.04
.98
.87
.76
under
75
over
85
Correction Factor
2.07 3.11 4.14 5.18
Use
1.96 2.94 3.92 4.90 formula
1.74 2.62 3.49 4.36 shown
1.53 2.29 3.05 3.82 below.
Interpolation is permissible.
Correction Factor = 1.10 x (1 – BF) x (edb – 80).
50TFQ004-012
549B036-120
125
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
Indoor Entering Air — Cfm/Bf
1200/0.17
Indoor Entering Air — Ewb (F)
72
67
62
43.2
40.3
37.3
21.9
28.0
33.7
2.23
2.20
2.17
42.1
39.0
36.0
21.6
27.8
33.2
2.51
2.48
2.44
37.6
33.9
40.8
27.4
32.2
21.2
2.78
2.74
2.82
39.2
36.0
32.3
20.8
26.8
31.4
3.16
3.11
3.06
37.4
34.2
30.2
20.2
26.1
30.1
3.52
3.47
3.40
35.5
32.1
28.6
19.5
25.3
28.6
3.91
3.85
3.79
PERFORMANCE DATA (cont)
COOLING CAPACITIES (cont)
Standard Ratings
549B072 (6 Tons)
Temp (F)
Outdoor
Entering Air
(Edb)
75
85
95
105
50TFQ004-012
549B036-120
115
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
1800/0.06
72
83.2
39.7
4.90
81.5
39.2
5.45
78.8
38.4
6.03
76.2
37.6
6.69
72.5
36.3
7.37
67
77.6
50.4
4.78
75.5
49.8
5.34
72.5
48.6
5.91
69.5
47.4
6.56
65.1
45.8
7.24
62
71.6
60.6
4.69
69.0
59.6
5.23
64.1
57.4
5.79
58.6
55.0
6.40
54.8
53.2
7.08
57
67.9
66.6
4.63
64.8
63.6
5.16
61.8
60.6
5.73
57.8
56.6
6.38
54.7
53.6
7.07
72
84.7
41.6
4.94
83.2
41.4
5.49
80.9
40.8
6.09
77.9
39.9
6.73
74.3
38.7
7.43
Indoor Entering Air — Cfm/Bf
2100/0.066
2400/0.071
Indoor Entering Air — Ewb (F)
67
62
57
72
67
62
79.8 73.6 71.5 85.9 81.0 75.0
54.3 65.9 70.1 43.4 57.6 70.6
4.84 4.71 4.69 4.97 4.86 4.74
77.3 71.1 69.4 84.5 78.5 72.7
53.5 65.0 68.0 43.3 56.9 69.7
5.36 5.27 5.23 5.52 5.38 5.29
74.5 67.0 66.1 82.0 76.0 69.9
52.6 63.2 64.8 42.8 56.4 68.3
5.96 5.84 5.82 6.11 6.00 5.89
71.3 63.4 63.1 79.3 72.7 67.2
51.4 61.4 61.9 42.2 55.3 65.9
6.61 6.45 6.44 6.77 6.64 6.51
67.8 58.6 58.6 75.6 69.1 63.2
50.2 57.4 57.5 41.1 54.0 62.0
7.30 7.16 7.16 7.48 7.34 7.21
3000/0.088
57
74.3
72.8
4.73
72.2
70.8
5.27
69.9
68.5
5.89
67.2
65.9
6.51
63.2
62.0
7.21
72
88.4
47.2
5.04
86.2
47.1
5.57
83.7
46.8
6.16
81.1
46.5
6.82
77.3
45.5
7.52
67
82.9
63.9
4.91
80.8
64.1
5.45
78.1
63.7
6.05
74.5
62.5
6.67
70.9
61.3
7.38
62
78.4
76.9
4.81
76.5
75.0
5.36
74.2
72.7
5.96
71.3
69.9
6.57
68.4
67.1
7.32
57
78.3
76.8
4.81
76.5
75.0
5.36
74.1
72.7
5.96
71.2
69.9
6.57
68.4
67.1
7.32
549B090 (71/2 Tons)
Temp (F)
Outdoor
Entering Air
(Edb)
75
85
95
105
115
125
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
62
84.3
72.7
5.73
79.8
70.5
6.43
75.0
68.1
7.19
70.7
65.9
8.04
66.9
64.0
8.98
66.7
63.8
9.94
Indoor Entering Air — Cfm/Bf
3000/0.15
Indoor Entering Air — Ewb (F)
72
67
62
100.8
95.6
89.9
51.5
67.3
83.8
5.86
5.78
5.78
100.0
94.1
86.7
51.7
68.1
82.4
6.65
6.56
6.62
91.3
81.8
98.2
51.7
67.5
79.8
7.50
7.41
7.30
94.8
87.3
76.6
50.9
66.3
76.4
8.39
8.33
8.15
91.7
81.6
72.5
50.3
64.2
72.5
9.44
9.27
9.11
87.1
76.0
69.1
48.7
62.0
69.1
10.49
10.27
10.14
62
111.4
96.0
7.20
106.6
94.0
8.09
99.4
90.8
9.01
92.0
87.4
10.02
86.6
84.6
11.15
84.6
83.4
12.36
Indoor Entering Air — Cfm/Bf
4000/0.04
Indoor Entering Air — Ewb (F)
72
67
62
141.2
129.0
116.6
71.2
92.4
111.8
7.61
7.45
7.29
137.6
124.4
112.0
70.6
91.4
110.0
8.50
8.33
8.17
119.4
107.2
133.2
69.6
89.8
107.0
9.30
9.15
9.48
127.4
113.6
101.4
68.0
88.0
101.4
10.53
10.35
10.22
121.2
106.6
94.8
66.0
85.4
94.8
11.68
11.51
11.35
114.6
98.4
88.8
64.4
82.4
88.8
12.97
12.73
12.60
2250/0.12
72
97.6
47.7
5.80
97.2
48.1
6.61
94.4
47.3
7.43
91.7
46.3
8.37
87.7
44.9
9.33
83.6
43.6
10.38
67
92.5
61.0
5.76
89.9
60.2
6.50
86.9
59.2
7.37
82.2
57.4
8.22
77.4
55.4
9.16
73.3
53.9
10.16
3750/0.18
72
101.6
55.0
5.86
102.4
55.8
6.69
99.6
55.0
7.50
97.0
54.8
8.44
93.9
55.0
9.48
89.5
53.7
10.53
67
97.8
74.4
5.82
96.0
74.1
6.58
93.7
74.8
7.43
90.1
74.1
8.35
85.3
72.5
9.33
79.0
70.1
10.36
62
91.7
89.7
5.73
89.9
89.3
6.50
87.3
87.3
7.35
83.4
83.4
8.26
78.8
78.6
9.22
74.4
74.4
10.25
549B120 (10 Tons)
Temp (F)
Outdoor
Entering Air
(Edb)
75
85
95
105
115
125
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
3000/0.03
72
136.0
64.6
7.51
132.6
63.6
8.40
127.8
62.2
9.36
122.4
60.4
10.41
116.8
58.6
11.58
110.6
56.4
12.87
67
124.0
80.8
7.35
119.6
79.2
8.23
114.6
77.6
9.18
108.8
75.4
10.26
101.8
72.8
11.37
95.8
70.6
12.62
5000/0.06
72
145.6
78.6
7.72
140.4
77.0
8.58
136.2
76.8
9.56
130.4
75.4
10.63
123.6
73.4
11.76
117.0
71.4
13.03
76
67
132.0
103.2
7.53
127.4
102.6
8.40
121.8
101.2
9.36
116.0
99.4
10.43
109.2
97.0
11.60
100.8
93.8
12.83
62
121.2
121.0
7.39
118.0
118.0
8.27
114.2
113.8
9.24
109.6
109.4
10.35
104.6
104.6
11.51
96.4
96.4
12.77
Bf
Edb
Ewb
kW
SHC
TC
—
—
—
—
—
—
LEGEND
Bypass Factor
Entering Dry-Bulb
Entering Wet-Bulb
Compressor Motor Power Input
Sensible Heat Capacity (1000 Btuh) Gross
Total Capacity (1000 Btuh) Gross
NOTES:
1. Direct interpolation is permissible. Do
extrapolate.
2. The following formulas may be used:
sensible capacity
(Btuh)
tldb = tedb –
1.10 x cfm
tlwb
=
Wet-bulb temperature
corresponding to enthalpy of air
leaving evaporator coil (hlwb)
hlwb
=
hewb
not
total capacity
(Btuh)
4.5 x cfm
–
Where: hewb = Enthalpy of air entering evaporator
coil
3. The SHC is based on 80 F edb temperature of air
entering evaporator coil.
Below 80 F edb, subtract (corr factor x cfm) from
SHC.
Above 80 F edb, add (corr factor x cfm) to SHC.
ENTERING AIR
DRY-BULB TEMP (F)
BYPASS
FACTOR
(BF)
79
78
77
76
75
81
82
83
84
85
.05
.10
.20
.30
1.04
.98
.87
.76
under
75
over
85
Correction Factor
2.07 3.11 4.14 5.18
Use
1.96 2.94 3.92 4.90 formula
1.74 2.62 3.49 4.36 shown
1.53 2.29 3.05 3.82 below.
Interpolation is permissible.
Correction Factor = 1.10 x (1 – BF) x (edb – 80).
PERFORMANCE DATA (cont)
INSTANTANEOUS AND INTEGRATED HEATING RATINGS
549B048 (4 Tons)
Return
Cfm
Air
(Standard
(F db)
Air)
Cap.
1200
kW
Cap.
55
1600
kW
Cap.
2000
kW
Cap.
1200
kW
Cap.
70
1600
kW
Cap.
2000
kW
Cap.
1200
kW
Cap.
80
1600
kW
Cap.
2000
kW
Temperature Air Entering Outdoor Coil (F db at 70% rh)
–20
–10
0
10
17
30
40
47
50
60
10.9 10.0
1.97
11.4 10.4
2.02
11.7 10.8
2.08
9.5 8.8
2.18
10.0 9.2
2.24
10.4 9.6
2.30
8.4 7.7
2.32
8.9 8.2
2.38
9.3 8.5
2.44
13.7 12.6
2.06
14.2 13.0
2.09
14.6 13.4
2.14
12.6 11.6
2.31
13.1 12.1
2.34
13.5 12.4
2.39
11.6 10.7
2.47
12.2 11.2
2.50
12.6 11.6
2.55
16.6 15.3
2.14
17.1 15.7
2.15
17.4 16.0
2.19
15.6 14.5
2.42
16.2 14.9
2.44
16.6 15.3
2.47
14.9 13.7
2.62
15.4 14.3
2.63
15.9 14.7
2.67
19.7 18.1
2.22
20.1 18.4
2.22
20.5 18.8
2.26
19.0 17.4
2.54
19.5 17.9
2.52
19.9 18.2
2.55
18.3 16.8
2.76
18.9 17.3
2.75
19.3 17.7
2.77
22.1 20.1
2.30
22.5 20.5
2.27
22.9 20.9
2.29
21.4 19.5
2.63
21.9 20.0
2.60
22.3 20.4
2.61
20.8 18.9
2.87
21.4 19.5
2.83
21.8 19.9
2.83
26.8 23.5
2.42
27.3 24.0
2.37
27.8 24.4
2.37
26.2 23.0
2.80
26.7 23.4
2.73
27.1 23.8
2.72
25.7 22.6
3.08
26.2 23.0
2.99
26.7 23.4
2.97
30.9 30.9
2.54
31.5 31.5
2.46
32.0 32.0
2.44
30.1 30.1
2.95
30.7 30.7
2.83
31.2 31.2
2.80
29.6 29.6
3.22
30.2 30.2
3.12
30.6 30.6
3.07
34.0 34.0
2.64
34.7 34.7
2.53
35.2 35.2
2.50
33.1 33.1
3.06
33.8 33.8
2.93
34.3 34.3
2.87
32.5 32.5
3.37
33.2 33.2
3.21
33.7 33.7
3.15
35.3 35.3
2.69
36.1 36.1
2.56
36.7 36.7
2.53
34.5 34.5
3.11
35.1 35.1
2.97
35.7 35.7
2.91
33.8 33.8
3.43
34.6 34.6
3.25
35.0 35.0
3.19
40.7 40.7
2.87
41.7 41.7
2.71
42.5 42.5
2.66
39.5 39.5
3.33
40.5 40.5
3.12
41.2 41.2
3.05
38.7 38.7
3.67
39.7 39.7
3.44
40.4 40.4
3.34
–20
–10
0
10
17
30
40
47
50
60
14.9 13.8
2.61
15.5 14.4
2.67
16.1 14.9
2.75
13.1 12.1
2.92
13.8 12.7
2.98
14.4 13.2
3.06
11.5 10.6
3.13
12.3 11.3
3.19
12.8 11.8
3.28
18.7 17.2
2.73
19.4 17.8
2.77
19.9 18.3
2.83
17.1 15.7
3.10
17.9 16.4
3.14
18.5 17.0
3.20
15.8 14.6
3.35
16.5 15.2
3.39
17.2 15.8
3.45
22.8 20.9
2.86
23.4 21.5
2.87
23.9 22.0
2.92
21.4 19.7
3.28
22.2 20.4
3.28
22.8 20.9
3.32
20.3 18.6
3.56
21.1 19.4
3.57
21.7 19.9
3.61
27.0 24.8
3.00
27.7 25.4
2.98
28.2 25.8
3.00
25.8 23.7
3.46
26.6 24.5
3.42
27.2 24.9
3.44
24.8 22.9
3.78
25.6 23.6
3.74
26.3 24.2
3.76
30.3 27.6
3.10
30.9 28.2
3.05
31.5 28.7
3.07
29.2 26.6
3.60
30.0 27.3
3.53
30.7 27.9
3.54
28.3 25.8
3.94
29.1 26.5
3.87
29.8 27.1
3.87
36.8 32.3
3.31
37.5 32.9
3.21
38.1 33.5
3.19
35.9 31.5
3.88
36.6 32.2
3.74
37.2 32.7
3.70
35.1 30.8
4.28
36.0 31.6
4.13
36.6 32.1
4.08
42.2 42.2
3.50
43.1 43.1
3.35
43.8 43.8
3.31
41.2 41.2
4.10
42.0 42.0
3.91
42.7 42.7
3.84
40.4 40.4
4.55
41.3 41.3
4.33
42.0 42.0
4.24
46.3 46.3
3.65
47.4 47.4
3.46
48.2 48.2
3.40
45.1 45.1
4.28
46.1 46.1
4.04
46.8 46.8
3.95
44.5 44.5
4.75
45.4 45.4
4.48
46.0 46.0
4.37
48.3 48.3
3.73
49.5 49.5
3.52
50.3 50.3
3.45
47.0 47.0
4.37
48.1 48.1
4.11
48.9 48.9
4.01
46.2 46.2
4.85
47.2 47.2
4.56
48.0 48.0
4.43
55.5 55.5
4.02
57.0 57.0
3.75
58.0 58.0
3.65
53.9 53.9
4.71
55.2 55.2
4.37
56.2 56.2
4.22
52.9 52.9
5.22
54.2 54.2
4.84
55.1 55.1
4.66
Temperature Air Entering Outdoor Coil (F db at 70% rh)
LEGEND
Cap. — Heating Capacity (1000 Btuh) (includes indoor-fan motor heat)
kW — Total Power Input (includes compressor motor power input,
outdoor-fan motor input, and indoor-fan motor input)
rh — Relative Humidity
NOTES:
1.
indicates integrated ratings.
2. Integrated capacity is maximum (instantaneous) capacity less the
effect of frost on the outdoor coil and the heat required to defrost it.
77
50TFQ004-012
549B036-120
549B036 (3 Tons)
Return
Cfm
Air
(Standard
(F db)
Air)
Cap.
900
kW
Cap.
55
1200
kW
Cap.
1500
kW
Cap.
900
kW
Cap.
70
1200
kW
Cap.
1500
kW
Cap.
900
kW
Cap.
80
1200
kW
Cap.
1500
kW
PERFORMANCE DATA (cont)
50TFQ004-012
549B036-120
INSTANTANEOUS AND INTEGRATED HEATING RATINGS (cont)
549B060 (5 Tons)
Return
Cfm
Air
(Standard
(F db)
Air)
Cap.
1500
kW
Cap.
55
2000
kW
Cap.
2500
kW
Cap.
1500
kW
Cap.
70
2000
kW
Cap.
2500
kW
Cap.
1500
kW
Cap.
80
2000
kW
Cap.
2500
kW
549B072 (6 Tons)
Return
Cfm
Air
(Standard
(F db)
Air)
Cap.
1800
kW
Cap.
2100
kW
55
Cap.
2400
kW
Cap.
3000
kW
Cap.
1800
kW
Cap.
2100
kW
70
Cap.
2400
kW
Cap.
3000
kW
Cap.
1800
kW
Cap.
2100
kW
80
Cap.
2400
kW
Cap.
3000
kW
Temperature Air Entering Outdoor Coil (F db at 70% rh)
–20
–10
0
10
17
30
40
47
50
60
19.4 17.8
3.28
20.7 19.0
3.48
21.7 20.0
3.69
14.5 13.3
3.20
15.9 14.7
3.44
17.2 15.8
3.67
9.9 9.1
3.04
11.2 10.3
3.27
12.4 11.4
3.50
24.8 22.8
3.53
25.9 23.8
3.68
26.8 24.7
3.85
21.8 20.0
3.71
23.3 21.4
3.91
24.5 22.5
4.11
18.3 16.8
3.66
20.0 18.4
3.89
21.3 19.6
4.12
29.7 27.3
3.67
30.6 28.1
3.77
31.4 28.9
3.92
28.2 26.0
4.07
29.5 27.1
4.20
30.5 28.1
4.35
25.9 23.8
4.20
27.5 25.3
4.38
28.8 26.5
4.56
34.7 31.8
3.77
35.6 32.6
3.84
36.4 33.4
3.98
34.0 31.2
4.30
34.9 32.1
4.36
35.8 32.9
4.47
32.8 30.1
4.60
34.2 31.4
4.69
35.1 32.3
4.81
38.5 35.1
3.85
39.5 36.0
3.90
40.4 36.8
4.03
37.8 34.5
4.42
38.7 35.3
4.43
39.6 36.1
4.53
37.0 33.8
4.80
38.2 34.8
4.83
39.1 35.6
4.92
46.8 41.0
4.04
48.0 42.1
4.04
49.0 42.9
4.15
45.7 40.1
4.64
46.8 41.0
4.59
47.8 41.9
4.66
45.1 39.5
5.10
46.1 40.4
5.02
47.1 41.2
5.07
53.9 53.9
4.21
55.4 55.4
4.18
56.5 56.5
4.28
52.4 52.4
4.83
53.7 53.7
4.74
54.8 54.8
4.79
51.6 51.6
5.32
52.8 52.8
5.18
53.9 53.9
5.20
59.5 59.5
4.36
61.1 61.1
4.30
62.2 62.2
4.40
57.7 57.7
5.00
59.3 59.3
4.87
60.4 60.4
4.91
56.7 56.7
5.49
58.1 58.1
5.32
59.3 59.3
5.32
62.1 62.1
4.43
63.8 63.8
4.37
65.0 65.0
4.46
60.2 60.2
5.08
61.8 61.8
4.94
63.1 63.1
4.97
59.1 59.1
5.58
60.6 60.6
5.38
61.8 61.8
5.38
71.9 71.9
4.73
73.3 73.3
4.60
72.1 72.1
4.61
69.5 69.5
5.40
71.5 71.5
5.21
72.4 72.4
5.21
68.1 68.1
5.92
70.0 70.0
5.66
71.4 71.4
5.65
–20
–10
0
10
17
30
40
47
50
60
16.5 15.2
3.50
16.9 15.5
3.56
17.2 15.9
3.64
18 16.5
3.79
15.2 14.0
3.97
15.6 14.4
4.04
16.1 14.8
4.11
16.8 15.5
4.28
13.6 12.5
4.20
14.1 13.0
4.28
14.5 13.4
4.37
15.4 14.1
4.54
20.8 19.1
3.63
21.2 19.5
3.68
21.8 20.0
3.75
23.0 21.1
3.90
18.2 16.7
4.12
18.6 17.1
4.18
19.0 17.5
4.24
19.7 18.1
4.39
17.1 15.7
4.46
17.6 16.2
4.52
18.0 16.6
4.59
18.8 17.3
4.74
26.4 22.4
3.79
27.2 23.1
3.84
28.0 23.8
3.89
29.4 25.0
4.03
24.1 20.5
4.33
24.8 21.1
4.37
25.9 22.0
4.43
26.7 22.7
4.56
21.7 18.4
4.67
22.6 19.2
4.72
23.1 19.6
4.77
24.1 20.5
4.91
33.6 30.8
4.01
34.9 32.0
4.04
35.6 32.6
4.08
37.4 34.4
4.19
31.1 28.5
4.57
32.0 29.4
4.59
32.7 30.0
4.63
34.3 31.5
4.75
29.2 26.8
4.95
30.1 27.6
4.98
31.2 28.7
5.03
32.2 29.6
5.14
41.0 37.6
4.18
41.8 38.3
4.18
43.1 39.5
4.21
45.2 41.4
4.32
38.0 34.8
4.75
39.1 35.9
4.76
39.9 36.6
4.79
41.8 38.3
4.89
36.5 33.4
5.16
37.1 34.0
5.16
37.9 32.7
34.7
39.6 36.3
5.29
51.3 44.9
4.57
52.2 45.8
4.54
53.8 47.2
4.54
56.6 49.6
4.61
47.7 41.8
5.19
49.1 43.1
5.15
51.1 44.7
5.17
53.5 46.8
5.22
45.6 40.0
5.62
46.9 41.1
5.58
48.5 42.5
5.59
50.4 44.2
5.64
61.9 61.9
4.94
63.2 63.2
4.86
64.1 64.1
4.82
63.2 63.2
4.77
58.4 58.4
5.59
59.7 59.7
5.51
61.3 61.3
5.48
63.7 63.7
5.49
55.3 55.3
6.02
57.0 57.0
5.95
58.7 58.7
5.93
61.6 61.6
5.95
69.5 69.5
5.22
69.6 69.6
5.07
69.0 69.0
4.97
65.5 65.5
4.84
67.1 67.1
5.94
68.5 68.5
5.81
69.0 69.0
5.73
68.3 68.3
5.63
64.2 64.2
6.40
66.4 66.4
6.30
67.7 67.7
6.23
68.9 68.9
6.17
78.0 78.0
5.57
75.7 75.7
5.30
74.8 74.8
5.18
69.8 69.8
4.98
78.0 78.0
6.43
77.3 77.3
6.17
75.6 75.6
5.97
73.0 73.0
5.80
77.2 77.2
7.00
76.3 76.3
6.71
76.3 76.3
6.57
74.3 74.3
6.37
77.9 77.9
5.55
76.5 76.5
5.32
74.3 74.3
5.15
70.6 70.6
4.99
77.9 77.9
6.41
76.7 76.7
6.13
76.3 76.3
5.99
73.8 73.8
5.82
76.9 76.9
6.98
77.2 77.2
6.74
75.9 75.9
6.54
74.5 74.5
6.36
Temperature Air Entering Outdoor Coil (F db at 70% rh)
LEGEND
Cap. — Heating Capacity (1000 Btuh) (includes indoor-fan motor heat)
kW — Total Power Input (includes compressor motor power input,
outdoor-fan motor input, and indoor-fan motor input)
rh — Relative Humidity
NOTES:
1.
indicates integrated ratings.
2. Integrated capacity is maximum (instantaneous) capacity less the
effect of frost on the outdoor coil and the heat required to defrost it.
78
PERFORMANCE DATA (cont)
INSTANTANEOUS AND INTEGRATED HEATING RATINGS (cont)
549B120 (10 Tons)
Return
Cfm
Air
(Standard
(F db)
Air)
Cap.
3000
kW
Cap.
55
4000
kW
Cap.
5000
kW
Cap.
3000
kW
Cap.
70
4000
kW
Cap.
5000
kW
Cap.
3000
kW
Cap.
80
4000
kW
Cap.
5000
kW
Temperature Air Entering Outdoor Coil (F db at 70% rh)
–20
–10
0
10
17
30
40
47
50
60
31.4 28.8
5.32
33.3 30.6
5.76
35.1 32.1
6.23
28.8 26.5
5.76
30.6 28.2
6.19
32.3 29.8
6.63
26.3 24.1
6.01
28.0 25.9
6.44
29.8 27.4
6.89
37.8 34.9
5.47
39.6 36.5
5.90
41.4 38.2
6.34
35.9 32.9
5.99
37.8 34.7
6.40
39.4 36.3
6.85
33.9 31.2
6.34
35.9 33.1
6.75
37.8 34.7
7.18
44.5 41.0
5.61
46.3 42.5
6.01
48.0 44.1
6.44
43.1 39.8
6.21
45.1 41.6
6.60
46.8 43.8
7.00
41.7 38.4
6.62
43.7 40.2
7.00
45.5 41.9
7.41
52.1 47.8
5.74
53.9 49.4
6.13
55.7 51.0
6.56
50.8 46.6
6.40
52.5 48.2
6.77
54.3 49.8
7.18
49.6 45.7
6.87
51.3 47.2
7.22
53.3 48.8
7.60
57.6 52.5
5.84
59.6 54.3
6.23
61.3 56.1
6.63
56.4 51.4
6.54
58.2 53.1
6.89
60.0 54.7
7.28
55.5 50.6
7.06
57.2 52.3
7.37
59.0 53.9
7.76
70.2 61.5
6.09
72.1 63.1
6.44
73.9 64.7
6.85
68.4 60.0
6.85
70.2 61.5
7.14
72.1 63.3
7.53
67.2 58.8
7.39
69.0 60.6
7.68
71.0 62.1
8.03
79.9 79.9
6.72
81.9 81.9
7.05
83.6 83.6
7.48
77.8 77.8
7.54
79.7 79.7
7.83
81.7 81.7
8.22
76.4 76.4
8.18
78.4 78.4
8.43
80.1 80.1
8.80
87.9 87.9
6.92
90.0 90.0
7.25
91.8 91.8
7.68
85.6 85.6
7.77
87.5 87.5
8.03
89.6 89.6
8.43
84.0 84.0
8.43
86.1 86.1
8.65
88.1 88.1
9.00
91.6 91.6
7.02
93.9 93.9
7.35
94.7 94.7
7.75
89.2 89.2
7.89
91.4 91.4
8.16
93.3 93.3
8.53
87.7 87.7
8.55
89.8 89.8
8.78
91.8 91.8
9.13
105.9 105.9
7.48
105.1 105.1
7.64
103.4 103.4
7.93
103.2 103.2
8.36
105.3 105.3
8.61
105.5 105.5
8.88
101.1 101.1
9.06
103.4 103.4
9.25
105.3 105.3
9.58
–20
–10
0
10
17
30
40
47
50
60
37.7 34.6
6.87
40.0 36.7
7.45
42.2 38.6
8.05
34.6 31.8
7.45
36.7 33.9
8.00
38.9 35.8
8.58
31.6 29.0
7.78
33.7 31.1
8.33
35.8 33.0
8.91
45.5 41.9
7.07
47.6 43.8
7.63
49.7 45.9
8.20
43.1 39.6
7.75
45.5 41.7
8.28
47.3 43.6
8.86
40.7 37.4
8.20
43.1 39.8
8.73
45.5 41.7
9.28
53.5 49.2
7.25
55.6 51.1
7.78
57.7 53.0
8.33
51.8 47.8
8.03
54.2 49.9
8.53
56.3 51.8
9.06
50.2 46.2
8.56
52.5 48.3
9.06
54.6 50.4
9.58
62.6 57.5
7.43
64.8 59.4
7.93
66.9 61.2
8.48
61.0 56.1
8.28
63.1 57.9
8.76
65.2 59.8
9.28
59.6 54.9
8.88
61.9 56.8
9.33
64.1 58.6
9.83
69.2 63.1
7.55
71.6 65.2
8.05
73.7 67.4
8.58
67.8 61.7
8.45
69.9 63.8
8.91
72.1 65.7
9.41
66.7 60.8
9.13
68.8 62.9
9.53
70.9 64.8
10.04
84.3 74.0
7.88
86.7 75.8
8.33
88.8 77.7
8.86
82.2 72.1
8.86
84.3 74.0
9.23
86.7 76.1
9.73
80.8 70.7
9.56
82.9 72.8
9.93
85.3 74.7
10.39
101.3 101.3
8.26
103.7 103.7
8.67
105.9 105.9
9.20
98.5 98.5
9.28
101.0 101.0
9.63
103.5 103.5
10.11
96.8 96.8
10.06
99.3 99.3
10.37
101.5 101.5
10.82
111.3 111.3
8.52
114.0 114.0
8.92
116.2 116.2
9.45
108.4 108.4
9.55
110.8 110.8
9.88
113.5 113.5
10.37
06.4 106.4
10.37
109.1 109.1
10.64
111.6 111.6
11.08
116.0 116.0
8.64
118.9 118.9
9.05
119.9 119.9
9.53
113.0 113.0
9.71
115.8 115.8
10.04
118.2 118.2
10.49
111.1 111.1
10.52
113.8 113.8
10.80
116.2 116.2
11.23
134.2 134.2
9.20
133.2 133.2
9.40
131.0 131.0
9.76
130.7 130.7
10.29
133.4 133.4
10.59
133.7 133.7
10.92
128.0 128.0
11.15
131.0 131.0
11.38
133.4 133.4
11.78
Temperature Air Entering Outdoor Coil (F db at 70% rh)
LEGEND
Cap. — Heating Capacity (1000 Btuh) (includes indoor-fan motor heat)
kW — Total Power Input (includes compressor motor power input,
outdoor-fan motor input, and indoor-fan motor input)
rh — Relative Humidity
NOTES:
1.
indicates integrated ratings.
2. Integrated capacity is maximum (instantaneous) capacity less the
effect of frost on the outdoor coil and the heat required to defrost it.
79
50TFQ004-012
549B036-120
549B090 (71/2 Tons)
Return
Cfm
Air
(Standard
(F db)
Air)
Cap.
2250
kW
Cap.
55
3000
kW
Cap.
3750
kW
Cap.
2250
kW
Cap.
70
3000
kW
Cap.
3750
kW
Cap.
2250
kW
Cap.
80
3000
kW
Cap.
3750
kW
PERFORMANCE DATA (cont)
FAN PERFORMANCE — VERTICAL DISCHARGE UNITS
549B036 (3 TONS) — STANDARD MOTOR (BELT DRIVE)
External Static Pressure (in. wg)
0.3
0.4
Rpm
Bhp
Rpm
Bhp
805
0.25
736
0.22
782
0.28
835
0.30
806
0.30
867
0.35
843
0.35
903
0.41
891
0.43
942
0.48
937
0.51
984
0.57
985
0.61
1029
0.66
Rpm
865
900
929
960
991
1032
1073
549B036 (3 TONS) — STANDARD MOTOR (BELT DRIVE) (cont)
External Static Pressure (in. wg)
Airflow
0.7
0.8
0.9
1.0
(Cfm)
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
957
0.39
988
0.43
1039
0.45
1061
0.47
900
992
0.44
1039
0.49
1061
0.51
1086
0.55
1000
1013
0.49
1068
0.55
1090
0.58
1100
1109
0.61
1045
0.56
1090
0.64
1200
1109
0.64
1156
0.68
1075
0.64
1300
1122
0.70
1152
0.72
1190
0.76
1400
1110
0.73
1160
0.84
1181
0.81
1237
0.85
1500
1150
0.82
1190
1.00
1225
0.90
1271
0.95
Rpm
1083
1111
1127
1203
1228
1293
1317
Airflow
(Cfm)
50TFQ004-012
549B036-120
900
1000
1100
1200
1300
1400
1500
0.1
Rpm
581
644
687
733
754
810
841
0.2
Bhp
0.12
0.19
0.22
0.26
0.29
0.35
0.42
Rpm
673
709
746
785
826
868
911
Bhp
0.18
0.22
0.26
0.32
0.38
0.45
0.53
0.5
0.6
Bhp
0.29
0.35
0.40
0.47
0.53
0.62
0.72
Rpm
911
937
964
994
1047
1067
1109
Bhp
0.53
0.59
0.64
0.71
0.80
0.89
1.00
Rpm
1105
1136
1145
1250
1266
1349
1363
1.1
Bhp
0.34
0.38
0.40
0.50
0.60
0.67
0.77
1.2
Bhp
0.57
0.63
0.67
0.74
0.84
0.93
1.05
2. Maximum continuous bhp is 1.20.
LEGEND
Bhp — Brake Horsepower Input to Fan
Refer to page 87 for general Fan Performance notes.
NOTES:
1. Boldface indicates a field-supplied drive is required. (See Note 3.)
3. Motor drive range: 760 to 1090 rpm. All other rpms require fieldsupplied drive.
549B048 (4 TONS) — STANDARD MOTOR (BELT DRIVE)
Airflow
(Cfm)
1200
1300
1400
1500
1600
1700
1800
1900
2000
0.1
Rpm
542
576
610
646
681
718
754
791
828
0.2
Bhp
0.16
0.20
0.24
0.28
0.33
0.39
0.45
0.52
0.60
Rpm
616
644
673
704
735
768
801
836
870
0.3
Bhp
0.21
0.25
0.30
0.35
0.40
0.46
0.53
0.60
0.68
Rpm
678
704
732
761
790
836
851
832
864
External Static Pressure (in. wg)
0.4
0.6
Bhp
Rpm
Bhp
Rpm
842
0.27
739
0.32
867
0.31
764
0.37
889
0.36
791
0.42
912
0.42
818
0.48
845
0.54
920
0.47
873
0.61
965
0.54
0.61
900
0.69
992
0.69
828
0.77
1019
0.77
858
0.86
1046
549B048 (4 TONS) — STANDARD MOTOR (BELT DRIVE) (cont)
External Static Pressure (in. wg)
Airflow
1.0
1.1
1.2
1.4
(Cfm)
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
1008
0.67
1052
0.73
1096
0.78
1134
0.89
1200
1029
0.75
1065
0.81
1101
0.86
1174
1.01
1300
1052
0.83
1087
0.90
1121
0.96
1183
1.09
1400
1208
1.20
1076
0.91
1111
0.99
1145
1.06
1500
1232
1.31
1100
1.00
1134
1.08
1168
1.15
1600
1192
1.25
1255
1.42
1124
1.09
1158
1.17
1700
1182
1.27
1217
1.36
1279
1.54
1147
1.18
1800
1169
1.27
1205
1.37
1240
1.47
1303
1.66
1900
1194
1.38
1228
1.48
1262
1.58
1327
1.78
2000
2.
LEGEND
Bhp — Brake Horsepower Input to Fan
Refer to page 87 for general Fan Performance notes.
NOTES:
1. Boldface indicates a field-supplied drive is required. (See Note 4.)
0.7
Bhp
0.44
0.50
0.55
0.61
0.68
0.76
0.84
0.93
1.03
Rpm
886
910
933
957
931
1005
1032
1058
1085
Bhp
1.00
1.15
1.22
1.33
1.46
1.58
1.71
1.85
1.98
Rpm
—
1277
1305
1337
1350
1370
1393
1417
1440
1.6
Rpm
1203
1229
1255
1274
1291
1314
1381
1408
1436
0.8
Bhp
0.50
0.56
0.62
0.69
0.76
0.84
0.92
1.02
1.12
Rpm
929
952
976
1001
1023
1045
1071
1097
1124
Bhp
0.56
0.62
0.69
0.76
0.83
0.91
1.00
1.10
1.21
1.8
Bhp
—
1.27
1.38
1.47
1.60
1.77
1.89
2.03
2.18
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 1.20.
4. Motor drive range: 840 to 1185 rpm. All other rpms require fieldsupplied drive.
80
PERFORMANCE DATA (cont)
FAN PERFORMANCE — VERTICAL DISCHARGE UNITS (cont)
549B060 (5 TONS) — STANDARD MOTOR (BELT DRIVE)
Airflow
(Cfm)
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
0.1
Rpm
711
751
791
852
894
936
978
1021
1064
1107
1150
0.2
Bhp
0.33
0.39
0.46
0.55
0.64
0.74
0.85
0.97
1.10
1.24
1.39
Rpm
769
806
846
905
945
984
1024
1064
1104
1145
1186
Bhp
0.39
0.45
0.53
0.62
0.72
0.82
0.93
1.05
1.18
1.32
1.48
External Static Pressure (in. wg)
0.4
Rpm
Bhp
878
0.51
906
0.53
941
0.66
1002
0.78
1037
0.88
1072
0.98
1108
1.10
1145
1.22
1183
1.36
1222
1.52
1262
1.68
0.8
Bhp
0.64
0.73
0.80
0.93
1.04
1.16
1.29
1.43
1.57
1.73
1.89
Rpm
1052
1087
1112
1163
1194
1226
1259
1294
1330
1365
1400
Bhp
0.78
0.88
0.96
1.10
1.21
1.33
1.47
1.62
1.78
1.94
2.12
1.6
Bhp
1.38
1.39
1.49
1.69
1.81
1.94
2.08
2.24
2.41
2.59
2.78
Rpm
1331
1395
1403
1433
1460
1485
1510
1538
1569
1601
—
50TFQ004-012
549B036-120
549B060 (5 TONS) — STANDARD MOTOR (BELT DRIVE) (cont)
External Static Pressure (in. wg)
Airflow
1.0
1.2
1.4
(Cfm)
Rpm
Bhp
Rpm
Bhp
Rpm
1134
0.95
1213
1.11
1276
1500
1159
1.02
1231
1.20
1311
1600
1184
1.12
1258
1.30
1322
1700
1235
1.29
1303
1.48
1371
1800
1396
1266
1.40
1330
1.59
1900
1297
1.53
1362
1.73
1422
2000
1393
1.87
1452
1327
1.66
2100
1359
1.81
1423
2.02
1483
2200
1392
1.97
1454
2.18
1515
2300
1426
2.15
1485
2.36
1544
2400
1461
2.34
1518
2.55
1575
2500
0.6
Rpm
971
1024
1030
1084
1119
1154
1190
1225
1260
1296
1331
Bhp
1.49
1.59
1.69
1.90
2.03
2.16
2.31
2.46
2.64
2.84
—
2.
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 1.80.
4. Standard motor drive range: 1020 to 1460 rpm. All other rpms require fieldsupplied drive.
LEGEND
Bhp — Brake Horsepower Input to Fan
Refer to page 87 for general Fan Performance notes.
NOTES:
1. Boldface indicates a field-supplied drive is required. (See Note 4.)
549B072 (6 TONS) — STANDARD MOTOR (BELT DRIVE)
Airflow
(Cfm)
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
0.1
Rpm
852
894
936
978
1021
1064
1107
1150
1193
1237
1280
1324
1368
0.2
Bhp
0.55
0.64
0.74
0.85
0.97
1.10
1.24
1.39
1.56
1.74
1.94
2.15
2.37
Rpm
905
945
984
1024
1064
1104
1145
1186
1228
1269
1311
1354
1396
Bhp
0.62
0.72
0.82
0.93
1.05
1.18
1.32
1.48
1.65
1.83
2.03
2.24
2.46
External Static Pressure (in. wg)
0.4
Rpm
Bhp
1002
0.78
1037
0.88
1072
0.98
1108
1.10
1145
1.22
1183
1.36
1222
1.52
1262
1.68
1301
1.86
1341
2.05
1381
2.25
1420
2.47
1460
2.69
549B072 (6 TONS) — STANDARD MOTOR (BELT DRIVE) (cont)
External Static Pressure (in. wg)
Airflow
1.0
1.2
1.4
(Cfm)
Rpm
Bhp
Rpm
Bhp
Rpm
1235
1.29
1303
1.48
1371
1800
1266
1.40
1330
1.59
1396
1900
1297
1.53
1362
1.73
1422
2000
1327
1.66
1393
1.87
1452
2100
1359
1.81
1423
2.02
1483
2200
1515
1392
1.97
1454
2.18
2300
1544
1426
2.15
1485
2.36
2400
1518
2.55
1575
1461
2.34
2500
1497
2.54
1552
2.76
—
2600
1532
2.75
—
—
—
2700
—
—
—
—
—
2800
—
—
—
—
—
2900
—
—
—
—
—
3000
0.6
Rpm
1084
1119
1154
1190
1225
1260
1296
1331
1367
1404
1442
1481
1521
0.8
Bhp
0.93
1.04
1.16
1.29
1.43
1.57
1.73
1.89
2.07
2.26
2.47
2.69
2.93
Rpm
1163
1194
1226
1259
1294
1330
1365
1400
1435
1471
1506
1542
—
Bhp
1.10
1.21
1.33
1.47
1.62
1.78
1.94
2.12
2.31
2.51
2.72
2.94
—
1.6
Bhp
1.69
1.81
1.94
2.08
2.24
2.41
2.59
2.78
—
—
—
—
—
Rpm
1433
1460
1485
1510
1538
1569
1601
—
—
—
—
—
—
Bhp
1.90
2.03
2.16
2.31
2.46
2.64
2.84
—
—
—
—
—
—
2.
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 2.40.
4. Standard motor drive range: 1120 to 1585 rpm. All other rpms require fieldsupplied drive.
LEGEND
Bhp — Brake Horsepower Input to Fan
Refer to page 87 for general Fan Performance notes.
NOTES:
1. Boldface indicates a field-supplied drive is required. (See Note 4.)
81
PERFORMANCE DATA (cont)
FAN PERFORMANCE — VERTICAL DISCHARGE UNITS (cont)
549B090 (71/2 TONS) — STANDARD MOTOR (BELT DRIVE)
50TFQ004-012
549B036-120
Airflow
(Cfm)
2250
2300
2400
2500
2550
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3750
0.2
Rpm
511
518
534
549
557
565
581
597
613
629
646
662
679
696
712
729
746
755
0.4
Bhp
0.52
0.55
0.61
0.67
0.71
0.74
0.81
0.89
0.97
1.06
1.15
1.25
1.35
1.46
1.57
1.69
1.85
1.89
Rpm
592
599
613
627
633
639
652
665
679
694
709
724
740
756
771
787
803
811
Bhp
0.74
0.77
0.84
0.90
0.94
0.97
1.04
1.12
1.20
1.29
1.39
1.50
1.61
1.73
1.85
1.98
2.12
2.20
External Static Pressure (in. wg)
0.6
0.8
Rpm
Bhp
Rpm
Bhp
659
0.95
722
1.19
727
1.22
665
0.98
738
1.30
677
1.06
750
1.38
690
1.14
756
1.42
697
1.18
761
1.46
703
1.22
773
1.55
717
1.31
733
1.40
786
1.66
745
1.50
799
1.76
759
1.59
812
1.88
772
1.70
825
1.99
785
1.80
840
2.11
798
1.91
854
2.24
811
2.02
868
2.37
824
2.14
881
2.50
839
2.21
894
2.64
854
2.42
907
2.78
862
2.49
914
2.85
549B090 (71/2 TONS) — STANDARD MOTOR (BELT DRIVE) (cont)
External Static Pressure (in. wg)
Airflow
1.4
1.6
1.8
(Cfm)
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
884
1.97
2250
937
2.33
947
2.66
885
2.00
2300
939
2.36
979
2.69
892
2.08
2400
944
2.40
987
2.76
902
2.18
2500
949
2.48
1002
2.84
908
2.24
2550
953
2.53
1003
2.87
1004
2.91
913
2.29
2600
957
2.58
1010
3.01
924
2.40
2700
967
2.70
1019
3.13
2800
935
2.52
978
2.62
989
2.96
1030
3.27
2900
946
2.65
1000
3.09
1040
3.41
3000
957
2.78
968
2.91
1011
3.24
—
—
3100
980
3.04
1022
3.38
—
—
3200
991
3.18
—
—
—
—
3300
1003
3.32
—
—
—
—
3400
1014
3.48
—
—
—
—
3500
—
—
—
—
—
—
3600
—
—
—
—
—
—
3700
—
—
—
—
—
—
3750
1.2
Bhp
1.43
1.47
1.55
1.64
1.69
1.74
1.83
1.93
2.04
2.15
2.28
2.41
2.54
2.69
2.84
2.99
3.15
3.23
Rpm
829
834
844
855
861
866
878
889
900
911
923
934
946
959
971
984
997
—
Bhp
1.68
1.72
1.81
1.91
1.96
2.01
2.12
2.23
2.34
2.46
2.58
2.71
2.85
3.00
3.16
3.22
3.49
—
2.0
Rpm
1022
1025
1039
1041
1045
1050
1056
1061
—
—
—
—
—
—
—
—
—
—
2.
LEGEND
Bhp — Brake Horsepower Input to Fan
Refer to page 87 for general Fan Performance notes.
NOTES:
1. Boldface indicates a field-supplied drive is required. (See Note 4.)
1.0
Rpm
778
783
794
805
811
816
827
839
850
862
875
887
900
914
928
942
956
963
Bhp
3.10
3.12
3.20
3.25
3.28
3.31
3.37
3.47
—
—
—
—
—
—
—
—
—
—
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 2.90.
4. Standard motor drive range: 725 to 925 rpm. All other rpms
require field-supplied drive.
82
PERFORMANCE DATA (cont)
FAN PERFORMANCE — VERTICAL DISCHARGE UNITS (cont)
549B120 (10 TONS) — STANDARD MOTOR (BELT DRIVE)
Airflow
(Cfm)
Rpm
459
478
500
519
537
561
592
654
668
683
697
711
726
741
755
770
784
799
814
829
843
0.4
Bhp
0.46
0.57
0.62
0.69
0.77
0.86
0.98
1.12
1.20
1.28
1.37
1.46
1.56
1.66
1.77
1.89
2.00
2.13
2.25
2.39
2.52
Rpm
625
637
647
658
669
680
692
714
727
741
754
767
780
794
808
821
835
849
863
877
892
Bhp
0.85
0.90
0.97
1.03
1.10
1.17
1.24
1.31
1.40
1.49
1.59
1.69
1.80
1.91
2.03
2.15
2.27
2.40
2.53
2.67
2.81
External Static Pressure (in. wg)
0.6
0.8
Rpm
Bhp
Rpm
Bhp
691
1.01
734
1.10
702
1.08
744
1.16
712
1.16
753
1.23
721
1.23
762
1.30
731
1.30
773
1.38
741
1.37
784
1.47
751
1.45
796
1.57
767
1.50
815
1.67
780
1.60
827
1.77
793
1.70
839
1.88
806
1.80
851
1.99
864
2.10
819
1.90
877
2.22
832
2.01
889
2.35
845
2.12
902
2.48
858
2.24
871
2.37
915
2.61
884
2.49
928
2.75
897
2.63
941
2.88
910
2.77
954
3.02
923
2.92
967
3.17
937
3.08
980
3.32
549B120 (10 TONS) — STANDARD MOTOR (BELT DRIVE) (cont)
External Static Pressure (in. wg)
Airflow
1.4
1.6
1.8
(Cfm)
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
886
1.73
943
1.88
988
1.91
3000
892
1.78
947
2.00
995
2.05
3100
899
1.85
951
2.06
1000
2.17
3200
907
1.93
959
2.10
1004
2.33
3300
915
2.01
966
2.17
1009
2.46
3400
924
2.09
974
2.24
1015
2.51
3500
933
2.18
983
2.32
1023
2.58
3600
950
2.27
991
2.47
1030
2.65
3700
959
2.38
1001
2.58
1040
2.78
3800
969
2.50
1010
2.70
1049
2.91
3900
979
2.62
1020
2.83
1059
3.04
4000
989
2.74
1029
2.96
1068
3.18
4100
1000
2.86
1039
3.10
1077
3.31
4200
1011
2.97
1049
3.23
4300
1087
3.46
1022
3.10
1059
3.37
4400
1097
3.61
1033
3.23
1070
3.51
4500
1107
3.76
1044
3.37
4600
1081
3.64
1117
3.92
1056
3.52
4700
1092
3.78
1127
4.07
1138
4.23
1057
3.69
4800
1103
3.93
1149
4.37
1079
3.87
4900
1114
4.09
1126
4.25
1160
4.53
5000
1091
4.05
1.2
Bhp
1.30
1.36
1.43
1.50
1.57
1.65
1.72
1.85
1.95
2.05
2.16
2.28
2.41
2.54
2.68
2.82
2.96
3.11
3.27
3.43
3.60
Rpm
829
837
845
853
862
871
880
906
916
927
938
949
960
971
983
995
1006
1018
1030
1043
1055
Bhp
1.50
1.56
1.63
1.71
1.78
1.86
1.95
2.08
2.18
2.28
2.38
2.49
2.60
2.72
2.86
3.01
3.17
3.32
3.48
3.65
3.82
2.0
Rpm
995
1008
1021
1036
1043
1054
1058
1064
1075
1085
1095
1105
1114
1124
1133
1143
1152
1162
1172
1182
1193
2.
LEGEND
Bhp — Brake Horsepower Input to Fan
Refer to page 87 for general Fan Performance notes.
NOTES:
1. Boldface indicates a field-supplied drive is required. (See Note 4.)
1.0
Rpm
787
796
805
814
823
832
841
861
873
884
895
907
919
931
943
955
968
981
993
1006
1019
Bhp
1.95
2.07
2.20
2.36
2.47
2.59
2.70
2.82
2.96
3.11
3.25
3.39
3.54
3.69
3.84
4.00
4.17
4.33
4.50
4.68
4.85
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 4.20 with standard motor.
4. Standard motor drive range: 860 to 1080 rpm. All other rpms
require field-supplied drive.
83
50TFQ004-012
549B036-120
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
0.2
PERFORMANCE DATA (cont)
FAN PERFORMANCE — HORIZONTAL DISCHARGE UNITS
549B036 (3 TONS) — STANDARD MOTOR (BELT DRIVE)
External Static Pressure (in. wg)
0.3
0.4
Rpm
Bhp
Rpm
Bhp
656
0.12
734
0.22
800
0.26
738
0.19
812
0.29
758
0.23
780
0.28
840
0.32
808
0.32
868
0.37
845
0.38
891
0.42
870
0.43
924
0.48
Rpm
818
848
863
889
916
937
969
549B036 (3 TONS) — STANDARD MOTOR (BELT DRIVE) (cont)
External Static Pressure (in. wg)
Airflow
0.7
0.8
0.9
1.0
(Cfm)
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
924
0.32
953
0.35
989
0.38
1028
0.42
900
936
0.35
977
0.39
1020
0.44
1064
0.48
1000
960
0.39
1005
0.43
1052
0.49
1100
1100
0.52
960
0.45
1038
0.50
1076
0.53
1200
1136
0.59
1012
0.51
1061
0.56
1090
0.61
1300
1172
0.65
1027
0.56
1071
0.60
1400
1108
0.67
1208
0.70
1056
0.63
1500
1097
0.68
1117
0.70
1245
0.74
Rpm
1074
1124
1163
1201
1239
1278
1315
Airflow
(Cfm)
50TFQ004-012
549B036-120
900
1000
1100
1200
1300
1400
1500
0.1
Rpm
526
570
614
658
703
725
755
0.2
Bhp
0.06
0.09
0.13
0.16
0.20
0.29
0.33
Rpm
584
627
670
710
752
776
816
Bhp
0.08
0.13
0.16
0.23
0.27
0.31
0.38
0.5
0.6
Bhp
0.25
0.29
0.32
0.36
0.41
0.47
0.53
Rpm
875
895
914
938
963
983
1014
Bhp
0.49
0.54
0.59
0.65
0.72
0.79
0.87
Rpm
1120
1185
1225
1266
1306
1347
1385
1.1
Bhp
0.27
0.31
0.35
0.40
0.45
0.51
0.58
1.2
Bhp
0.54
0.60
0.65
0.72
0.79
0.87
0.96
2. Maximum continuous bhp is 1.20.
LEGEND
Bhp — Brake Horsepower Input to Fan
Refer to page 87 for general Fan Performance notes.
NOTES:
1. Boldface indicates a field-supplied drive is required. (See Note 3.)
3. Motor drive range: 760 to 1090 rpm. All other rpms require fieldsupplied drive.
549B048 (4 TONS) — STANDARD MOTOR (BELT DRIVE)
Airflow
(Cfm)
1200
1300
1400
1500
1600
1700
1800
1900
2000
0.1
Rpm
514
545
577
609
642
675
709
743
778
0.2
Bhp
0.15
0.18
0.21
0.26
0.30
0.36
0.41
0.48
0.55
Rpm
590
615
642
670
699
728
759
790
836
0.3
Bhp
0.20
0.23
0.27
0.31
0.36
0.42
0.48
0.55
0.62
Rpm
657
680
704
729
755
782
810
838
875
External Static Pressure (in. wg)
0.4
0.6
Bhp
Rpm
Bhp
Rpm
0.25
723
0.30
828
849
0.29
744
0.35
870
0.33
766
0.39
892
0.38
788
0.44
913
0.43
811
0.49
935
0.49
836
0.55
860
0.62
957
0.55
886
0.69
980
0.62
0.70
913
0.77
1004
549B048 (4 TONS) — STANDARD MOTOR (BELT DRIVE) (cont)
External Static Pressure (in. wg)
Airflow
1.0
1.1
1.2
1.4
(Cfm)
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
999
0.66
1018
0.67
1036
0.68
1073
0.71
1200
1025
0.74
1058
0.79
1090
0.84
1121
0.87
1300
1042
0.81
1080
0.88
1118
0.95
1175
1.06
1400
1060
0.88
1098
0.96
1136
1.04
1500
1205
1.19
1224
1.29
1080
0.95
1117
1.04
1153
1.12
1600
1241
1.38
1101
1.03
1137
1.12
1172
1.20
1700
1192
1.29
1258
1.48
1122
1.11
1157
1.20
1800
1143
1.21
1179
1.30
1214
1.39
1279
1.58
1900
1165
1.31
1200
1.40
1235
1.49
1300
1.69
2000
2.
LEGEND
Bhp — Brake Horsepower Input to Fan
Refer to page 87 for general Fan Performance notes.
NOTES:
1. Boldface indicates a field-supplied drive is required. (See Note 4.)
0.7
Bhp
0.42
0.47
0.52
0.58
0.64
0.71
0.78
0.86
0.94
Rpm
876
895
915
936
957
979
1001
1023
1046
Bhp
0.75
0.90
1.09
1.30
1.45
1.56
1.67
1.78
1.90
Rpm
1138
1193
1244
1289
1337
1366
1385
1402
1419
1.6
Rpm
1109
1159
1206
1258
1287
1307
1323
1341
1361
0.8
Bhp
0.49
0.54
0.59
0.65
0.72
0.79
0.86
0.95
1.03
Rpm
924
940
959
980
1001
1023
1044
1066
1088
Bhp
0.55
0.60
0.66
0.72
0.79
0.86
0.94
1.03
1.12
1.8
Bhp
0.79
0.95
1.12
1.34
1.56
1.73
1.86
1.98
2.10
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 1.20.
4. Motor drive range: 840 to 1185 rpm. All other rpms require fieldsupplied drive.
84
PERFORMANCE DATA (cont)
FAN PERFORMANCE — HORIZONTAL DISCHARGE UNITS (cont)
549B060 (5 TONS) — STANDARD MOTOR (BELT DRIVE)
Airflow
(Cfm)
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
0.1
Rpm
665
703
741
765
802
840
878
916
954
993
1031
0.2
Bhp
0.31
0.36
0.40
0.45
0.45
0.60
0.69
0.78
0.89
1.00
1.13
Rpm
729
763
801
821
854
888
923
958
993
1029
1066
Bhp
0.35
0.40
0.47
0.51
0.58
0.66
0.75
0.85
0.96
1.07
1.20
External Static Pressure (in. wg)
0.4
Rpm
Bhp
843
0.47
872
0.53
902
0.60
923
0.65
953
0.73
984
0.82
1015
0.91
1046
1.01
1079
1.13
1112
1.25
1145
1.39
0.8
Bhp
0.60
0.66
0.75
0.81
0.90
0.99
1.08
1.19
1.31
1.43
1.57
Rpm
1026
1049
1077
1099
1126
1154
1182
1209
1237
1264
1292
Bhp
0.74
0.81
0.89
0.96
1.06
1.16
1.27
1.39
1.51
1.63
1.77
1.6
Bhp
1.18
1.32
1.41
1.52
1.62
1.73
1.85
1.97
2.11
2.26
2.43
Rpm
1079
1281
1359
1382
1402
1424
1448
1473
1496
1519
1543
Bhp
1.10
1.44
1.60
1.72
1.83
1.94
2.07
2.20
2.34
2.48
2.65
50TFQ004-012
549B036-120
549B060 (5 TONS) — STANDARD MOTOR (BELT DRIVE) (cont)
External Static Pressure (in. wg)
Airflow
1.0
1.2
1.4
(Cfm)
Rpm
Bhp
Rpm
Bhp
Rpm
1108
0.89
1187
1.06
1202
1500
1130
0.97
1206
1.14
1275
1600
1152
1.05
1226
1.23
1298
1700
1178
1.14
1249
1.32
1316
1800
1201
1.23
1274
1.43
1338
1900
1226
1.33
1297
1.53
1363
2000
1388
1252
1.45
1320
1.64
2100
1280
1.58
1345
1.77
1410
2200
1372
1.91
1434
1309
1.71
2300
1336
1.85
1400
2.06
1459
2400
1363
2.00
1428
2.22
1486
2500
0.6
Rpm
940
965
993
1019
1046
1073
1101
1129
1160
1190
1220
2.
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 1.80.
4. Standard motor drive range: 1020 to 1460 rpm. All other rpms require fieldsupplied drive.
LEGEND
Bhp — Brake Horsepower Input to Fan
Refer to page 87 for general Fan Performance notes.
NOTES:
1. Boldface indicates a field-supplied drive is required. (See Note 4.)
549B072 (6 TONS) — STANDARD MOTOR (BELT DRIVE)
Airflow
(Cfm)
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
0.1
Rpm
765
802
840
878
916
954
993
1031
1070
1109
1148
1188
1227
0.2
Bhp
0.45
0.45
0.60
0.69
0.78
0.89
1.00
1.13
1.26
1.41
1.57
1.74
1.92
Rpm
821
854
888
923
958
993
1029
1066
1103
1140
1177
1215
1253
Bhp
0.51
0.58
0.66
0.75
0.85
0.96
1.07
1.20
1.34
1.48
1.64
1.81
2.00
External Static Pressure (in. wg)
0.4
Rpm
Bhp
923
0.65
953
0.73
984
0.82
1015
0.91
1046
1.01
1079
1.13
1112
1.25
1145
1.39
1179
1.52
1212
1.67
1246
1.83
1281
2.00
1316
2.19
549B072 (6 TONS) — STANDARD MOTOR (BELT DRIVE) (cont)
External Static Pressure (in. wg)
Airflow
1.0
1.2
1.4
(Cfm)
Rpm
Bhp
Rpm
Bhp
Rpm
1178
1.14
1249
1.32
1316
1800
1201
1.23
1274
1.43
1338
1900
1226
1.33
1297
1.53
1363
2000
1252
1.45
1320
1.64
1388
2100
1280
1.58
1345
1.77
1410
2200
1309
1.71
1372
1.91
1434
2300
1336
1.85
1400
2.06
1459
2400
1486
1363
2.00
1428
2.22
2500
1514
1390
2.15
1456
2.38
2600
1483
2.56
1543
1418
2.31
2700
1446
2.48
1510
2.73
—
2800
1476
2.67
1537
2.92
—
2900
1506
2.88
—
—
—
3000
0.6
Rpm
1019
1046
1073
1101
1129
1160
1190
1220
1251
1283
1316
1349
1382
0.8
Bhp
0.81
0.90
0.99
1.08
1.19
1.31
1.43
1.57
1.71
1.87
2.04
2.22
2.42
Rpm
1099
1126
1154
1182
1209
1237
1264
1292
1322
1352
1383
1413
1444
Bhp
0.96
1.06
1.16
1.27
1.39
1.51
1.63
1.77
1.92
2.09
2.26
2.44
2.63
1.6
Bhp
1.52
1.62
1.73
1.85
1.97
2.11
2.26
2.43
2.61
2.80
—
—
—
Rpm
1382
1402
1424
1448
1473
1496
1519
1543
1569
—
—
—
—
Bhp
1.72
1.83
1.94
2.07
2.20
2.34
2.48
2.65
2.83
—
—
—
—
2.
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 2.40.
4. Standard motor drive range: 1120 to 1585 rpm. All other rpms require fieldsupplied drive.
LEGEND
Bhp — Brake Horsepower Input to Fan
Refer to page 87 for general Fan Performance notes.
NOTES:
1. Boldface indicates a field-supplied drive is required. (See Note 4.)
85
PERFORMANCE DATA (cont)
FAN PERFORMANCE — HORIZONTAL DISCHARGE UNITS (cont)
549B090 (71/2 TONS) — STANDARD MOTOR (BELT DRIVE)
External Static Pressure (in. wg)
0.6
0.8
Bhp
Rpm
Bhp
Rpm
0.64
630
0.86
695
0.66
635
0.89
699
0.71
645
0.95
708
0.76
654
1.01
717
0.79
659
1.05
722
727
0.82
663
1.08
737
0.89
672
1.14
747
0.95
683
1.20
756
1.02
693
1.27
765
1.09
704
1.35
775
1.17
715
1.43
727
1.52
785
1.24
739
1.62
795
1.32
750
1.72
806
1.41
761
1.82
817
1.50
772
1.93
828
1.60
783
2.03
840
1.71
1.77
789
2.09
846
Bhp
1.09
1.12
1.18
1.25
1.29
1.32
1.40
1.49
1.57
1.66
1.74
1.83
1.91
2.01
2.11
2.23
2.35
2.42
Rpm
757
760
768
776
780
784
793
802
813
823
832
841
851
860
870
880
890
896
549B090 (71/2 TONS) — STANDARD MOTOR (BELT DRIVE) (cont)
External Static Pressure (in. wg)
Airflow
1.2
1.4
1.6
1.8
(Cfm)
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
Rpm
810
1.62
850
1.91
873
2.20
890
2250
816
1.65
859
1.94
888
2.24
897
2300
824
1.72
872
2.01
909
2.32
2400
931
832
1.79
882
2.09
925
2.40
2500
955
836
1.83
887
2.13
2550
931
2.45
964
839
1.87
891
2.17
2600
936
2.49
973
987
846
1.95
898
2.26
2700
946
2.58
997
855
2.04
906
2.35
2800
954
2.67
1006
863
2.13
913
2.44
2900
961
2.77
1014
872
2.22
921
2.54
3000
969
2.88
976
2.99
1021
882
2.33
3100
930
2.65
984
3.10
—
892
2.45
3200
939
2.76
993
3.21
—
902
2.57
3300
948
2.88
958
3.01
1002
3.34
—
912
2.69
3400
968
3.15
—
—
—
921
2.82
3500
930
2.95
978
3.29
—
—
—
3600
940
3.07
—
—
—
—
—
3700
945
3.14
—
—
—
—
—
3750
Bhp
2.50
2.55
2.64
2.72
2.77
2.82
2.91
3.01
3.12
3.22
3.34
—
—
—
—
—
—
—
Rpm
903
922
935
972
986
999
1019
1034
—
—
—
—
—
—
—
—
—
—
50TFQ004-012
549B036-120
Airflow
(Cfm)
2250
2300
2400
2500
2550
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3750
0.2
Rpm
465
471
482
494
501
507
520
533
546
559
572
585
598
610
623
636
649
655
0.4
Bhp
0.43
0.45
0.50
0.54
0.57
0.59
0.65
0.71
0.77
0.83
0.90
0.96
1.03
1.10
1.17
1.25
1.33
1.37
Rpm
554
559
569
581
587
592
604
615
626
637
648
660
671
682
694
707
720
727
2.
LEGEND
Bhp — Brake Horsepower Input to Fan
Refer to page 87 for general Fan Performance notes.
NOTES:
1. Boldface indicates a field-supplied drive is required. (See Note 4.)
1.0
Bhp
1.34
1.37
1.44
1.51
1.55
1.58
1.66
1.75
1.84
1.94
2.05
2.15
2.26
2.36
2.47
2.57
2.69
2.75
2.0
Bhp
2.78
2.85
2.96
3.06
3.11
3.16
3.26
3.36
—
—
—
—
—
—
—
—
—
—
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 2.90.
4. Standard motor drive range: 725 to 925 rpm. All other rpms
require field-supplied drive.
86
PERFORMANCE DATA (cont)
FAN PERFORMANCE — HORIZONTAL DISCHARGE UNITS (cont)
549B120 (10 TONS) — STANDARD MOTOR (BELT DRIVE)
External Static Pressure (in. wg)
Airflow
0.2
0.4
0.6
0.8
(Cfm)
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
3000
459
0.35
595
0.74
657
0.88
716
1.05
3100
478
0.46
605
0.79
667
0.94
725
1.10
3200
500
0.57
615
0.85
679
1.01
734
1.16
3300
519
0.62
625
0.90
691
1.08
744
1.23
3400
537
0.69
637
0.97
702
1.16
753
1.30
3500
561
0.77
647
1.03
712
1.23
762
1.38
3600
592
0.86
658
1.10
721
1.30
773
1.47
3700
607
0.97
670
1.18
732
1.37
782
1.56
3800
621
1.05
681
1.25
742
1.45
795
1.66
3900
636
1.13
693
1.32
751
1.53
808
1.76
4000
650
1.21
705
1.40
761
1.61
819
1.86
4100
665
1.30
717
1.48
772
1.71
830
1.96
4200
680
1.39
728
1.57
783
1.81
839
2.05
4300
696
1.49
739
1.66
794
1.91
848
2.14
4400
711
1.60
750
1.75
805
2.02
857
2.24
867
2.35
4500
727
1.70
762
1.85
817
2.12
877
2.46
4600
742
1.82
774
1.96
828
2.23
888
2.59
4700
758
1.94
786
2.07
840
2.34
899
2.72
4800
773
2.06
799
2.18
852
2.46
863
2.57
910
2.86
4900
789
2.19
812
2.30
875
2.70
921
2.99
5000
805
2.32
826
2.43
Rpm
770
779
787
796
805
814
823
833
842
851
861
871
883
896
908
919
929
938
947
957
966
549B120 (10 TONS) — STANDARD MOTOR (BELT DRIVE) (cont)
External Static Pressure (in. wg)
Airflow
1.2
1.4
1.6
1.8
(Cfm)
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
Rpm
Bhp
872
1.69
919
1.88
950
1.70
3000
822
1.44
882
1.73
932
2.00
965
1.80
3100
829
1.50
886
1.78
943
2.06
978
1.91
3200
837
1.56
892
1.85
947
2.10
988
2.05
3300
845
1.63
899
1.93
951
2.17
995
2.17
3400
853
1.71
862
1.78
907
2.01
959
2.24
1000
2.33
3500
871
1.86
915
2.09
965
2.32
1005
2.46
3600
879
1.95
927
2.17
973
2.38
1013
2.57
3700
889
2.03
934
2.26
980
2.48
1022
2.69
3800
898
2.12
942
2.36
987
2.59
1030
2.81
3900
908
2.21
950
2.46
994
2.70
1037
2.92
4000
917
2.32
960
2.55
1001
2.81
1045
3.04
4100
925
2.44
969
2.65
1009
2.92
1051
3.17
4200
935
2.56
979
2.77
1018
3.03
1058
3.29
4300
945
2.68
988
2.89
1028
3.14
1066
3.41
4400
955
2.82
996
3.02
1037
3.25
1074
3.54
4500
967
2.96
1005
3.16
1046
3.38
4600
1084
3.66
980
3.11
1015
3.30
1056
3.52
4700
1093
3.79
992
3.26
1025
3.45
1064
3.67
4800
1103
3.92
1003
3.41
1036
3.61
1073
3.83
4900
1112
4.07
1121
4.23
1014
3.56
1049
3.79
5000
1083
4.00
Rpm
962
971
984
995
1008
1021
1036
1046
1058
1068
1077
1085
1092
1100
1106
1113
1121
1129
1137
1147
1157
Bhp
1.24
1.30
1.36
1.43
1.50
1.57
1.65
1.73
1.82
1.92
2.02
2.13
2.25
2.38
2.51
2.63
2.75
2.87
2.98
3.11
3.24
2.0
Bhp
1.82
1.95
2.07
2.20
2.32
2.47
2.59
2.73
2.87
3.01
3.14
3.21
3.40
3.53
3.67
3.81
3.95
4.09
4.22
4.36
4.50
indicates field-supplied motor and drive are required.
3. Maximum continuous bhp is 4.20 with standard motor.
4. Standard motor drive range: 860 to 1080 rpm. All other rpms
require field-supplied drive.
GENERAL NOTES FOR FAN PERFORMANCE TABLES
1. Extensive motor and electrical testing on these units ensures that
2. Values include losses for filters, unit casing, and wet coils. See
the full range of the motor can be utilized with confidence. Using
page 88 for accessory/FIOP static pressure information.
your fan motors up to the wattage ratings shown will not result in
3. Use of a field-supplied motor may affect wire sizing. Contact your
nuisance tripping or premature motor failure. Unit warranty will not
Bryant representative for details.
be affected. For additional information on motor performance, refer
4. Interpolation is permissible. Do not extrapolate.
to Indoor-Fan Motor Data table on page 89.
87
50TFQ004-012
549B036-120
2.
LEGEND
Bhp — Brake Horsepower Input to Fan
Refer to this page for general Fan Performance notes.
NOTES:
1. Boldface indicates a field-supplied drive is required. (See Note 4.)
1.0
PERFORMANCE DATA (cont)
ACCESSORY/FIOP STATIC PRESSURE* (in. wg) — 549B036-072
CFM
COMPONENT
900
0.05
0.15
1 Heater Module
2 Heater Modules
Durablade Economizer
Accessory
EconoMi$er
1200
0.07
0.16
1400
0.09
0.16
1600
0.09
0.16
1800
0.10
0.17
2000
0.11
0.17
2200
0.11
0.17
2400
0.12
0.18
2600
0.13
0.18
3000
0.15
0.19
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.09
0.13
0.17
0.22
0.27
0.32
0.39
0.45
0.53
LEGEND
FIOP — Factory-Installed Option
*The static pressure must be added to external static pressure. The sum and the indoor
entering-air cfm should then be used in conjunction with the Fan Performance tables to determine blower rpm and watts.
ACCESSORY/FIOP STATIC PRESSURE* (in. wg) — 549B090,120
CFM
50TFQ004-012
549B036-120
COMPONENT
1 Heater Module
2 Heater Modules
Durablade Economizer
Accessory
EconoMi$er
2250
0.02
0.03
2500
0.03
0.05
3000
0.05
0.07
3500
0.07
0.09
4000
0.08
0.12
4500
0.10
0.14
5000
0.12
0.16
5500
0.14
0.19
6000
0.16
0.21
6250
0.17
0.20
0.02
0.02
0.03
0.04
0.05
0.06
0.07
0.08
0.09
0.09
0.07
0.09
0.13
0.18
0.23
0.30
0.36
—
—
—
LEGEND
FIOP — Factory-Installed Option
*The static pressure must be added to external static pressure. The sum and the indoor
entering-air cfm should then be used in conjunction with the Fan Performance tables to determine blower rpm and watts.
FAN RPM AT MOTOR PULLEY SETTINGS* — 549B036-120
UNIT
549B
036
048
060
072
090
120
0
1090
1185
1460
1585
925
1080
1/2
1055
1150
1425
1540
905
1060
1
1025
1115
1385
1490
888
1035
11 / 2
990
1080
1350
1445
865
1015
2
960
1045
1315
1400
845
990
MOTOR PULLEY TURNS OPEN
21 / 2
3
31 / 2
4
925
890
860
825
1015
980
945
910
1275
1240
1205
1165
1350
1305
1260
1210
825
805
785
765
970
950
925
905
*Approximate fan rpm shown.
88
41 / 2
795
875
1130
1165
745
880
5
760
840
1095
1120
725
860
51 / 2
—
—
1055
—
—
—
6
—
—
1020
—
—
—
PERFORMANCE DATA (cont)
OPTIONAL POWER EXHAUST
0.25
UNIT
SIZE
AMPS @ 230 V
(2 Fans Running)
549B036-072
549B090,120
1.40 Amps @ 60 Hz
3.04 Amps @ 60 Hz
STATIC PRESSURE (in. wg)
POWER REQUIREMENTS
MOCP
230 VAC
460 VAC
15.0 amps
15.0 amps
MOCP — Maximum Overcurrent Protection
0.20
0.15
0.10
0.05
0.00
0
549B036-072
549B090,120
1000
500
1500
2000
FLOW (CFM)
2000
5000
2 FANS
OPERATING
1500
FLOW (cfm)
FLOW (cfm)
2500
1 FAN
OPERATING
1000
500
0
4000
3000
2 FANS
OPERATING
2000
1 FAN
OPERATING
1000
0
0
0.1
0.2
0.3
0.4
0
0.5
0.1
0.2
0.3
0.4
0.5
STATIC PRESSURE (in. wg)
STATIC PRESSURE (in. wg)
EconoMi$er Power Exhaust Performance
(549B090,120)
EconoMi$er Power Exhaust Performance
(549B036-072)
INDOOR-FAN MOTOR DATA — 549B036-120
UNIT
549B
UNIT
PHASE
Single
MAXIMUM
CONTINUOUS BHP*
1.20
MAXIMUM
OPERATING WATTS*
1000
Three
1.20
1000
Single
1.20
1000
Three
1.20
1000
Single
1.80
1921
Three
1.80
1921
072
Three
2.40
2120
090
Three
2.90
2615
120
Three
4.20
3775
036
048
060
UNIT VOLTAGE
208/230
208/230
460
208/230
208/230
460
208/230
208/230
460
208/230
460
208/230
460
208/230
460
MAXIMUM
AMP DRAW
5.1
5.1
2.3
5.1
5.1
2.3
9.2
6.1
2.7
6.1
2.7
7.9
3.6
11.1
5.0
LEGEND
Bhp — Brake Horsepower Input to Fan
*Extensive motor and electrical testing on these units ensures that the full horsepower and watts range of the motors
can be utilized with confidence. Using your fan motors up to the ratings shown in this table will not result in nuisance
tripping or premature motor failure. Unit warranty will not be affected.
89
MOTOR
EFFICIENCY (%)
75
75
74
84
80
85
50TFQ004-012
549B036-120
EconoMi$er Barometric Relief
Damper Characteristics
PERFORMANCE DATA (cont)
ELECTRIC HEATING CAPACITIES
UNIT
549B
VOLTAGE
(60 Hz)
208/230
(single phase)
036
208/230
(3 phase)
460
(3 phase)
50TFQ004-012
549B036-120
208/230
(single phase)
048
208/230
(3 phase)
460
(3 phase)
208/230
(single phase)
060
208/230
(3 phase)
460
(3 phase)
208/230
(3 phase)
072
460
(3 phase)
ACCESSORY
kW
ACCESSORY
HEATER
PART NUMBER
CRHEATER---A00
4.4
6.5
8.7
10.5
13.0*
4.4
6.5
8.7
10.5
16.0
6.0
8.8
11.5
14.0
4.4
8.7
13.0*
17.4*
21.0*
6.5
8.7
16.0
21.0*
6.0
11.5
14.0
23.0*
6.5
8.7
13.0*
17.4*
21.0*
6.5
10.5
16.0
21.0*
26.5*
6.0
11.5
14.0
23.0*
25.5*
6.5
10.5
16.0
21.0*
26.5*
6.0
11.5
14.0
23.0*
25.5*
101
102
103
104
102*
101
102
103
104
105
106
107
108
109
101
103
102*
103*
104*
102
103
105
104*
106
108
109
108*
102
103
102*
103*
104*
102
104
105
104*
105,104
106
108
109
108*
109,108
102
104
105
104*
105,104
106
108
109
108*
109,108
ELECTRIC HEATING CAPACITIES (cont)
ACCESSORY
SINGLE
POINT BOX
PART NO.
CRSINGLE---A00
—
—
—
—
004
—
—
—
—
—
—
—
—
—
—
—
004
004
004
—
—
—
002
—
—
—
—
—
—
004
004
004
—
—
—
002
002
—
—
—
—
—
—
—
—
002
002
—
—
—
—
—
UNIT
549B
VOLTAGE
(60 Hz)
ACCESSORY
kW
ACCESSORY
HEATER
PART NUMBER
CRHEATER---A00
10.4
16.0
24.8
32.0
42.4*
13.9
16.5
27.8
33.0
41.7*
10.4
16.0
32.0
42.4*
50.0*
16.5
27.8
33.0
41.7*
50.0*
117
110
111
112
112,117
116
113
114
115
114,116
117
110
112
112,117
112,110
113
114
115
114,116
115,113
208/230
(3 phase)
090
460
(3 phase)
208/230
(3 phase)
120
460
(3 phase)
ACCESSORY
SINGLE
POINT BOX
PART NO.
CRSINGLE---A00
006
006
007
007
009
006
006
006
006
008
012
012
012
015
015
011
011
011†
014
014
*Two heater packages required to provide kW indicated.
†On units with factory-installed outlet, use CRSINGLE014A00.
NOTES: The kW ratings shown above are at 240 and 480 v. Use the Multiplication
Factors table to determine heater capacity for your particular voltage.
MULTIPLICATION FACTORS
VOLTAGE
DISTRIBUTION
V/3/60
200
208
230
240
440
460
480
HEATER kW
RATING
240
480
EXAMPLE:
MULTIPLICATION
FACTOR
.69
.75
.92
1.00
.84
.92
1.00
32.0 kW (at 240 v) heater on 208 v
= 32.0 (.75 mult factor)
= 24.0 kW capacity at 208 v.
OUTDOOR SOUND POWER (TOTAL UNIT)
549B
036,048
060,072
090
120
ARI
RATING
(dB)
76
80
82
84
OCTAVE BANDS; Lw (A)
63
125
250
500
1000
2000
4000
8000
50.8
57.6
62.3
64.6
63.4
70.2
69.3
71.1
62.2
66.9
71.5
73.3
65.9
71.7
74.7
76.9
69.2
74.7
76.2
77.6
65.9
72.2
72.9
73.7
63.0
67.8
68.7
70.6
56.5
62.4
61.5
63.7
ARI
— Air Conditioning and Refrigeration Institute
Lw (A) — Unit A — Weighted Sound Power Level
90
ELECTRICAL DATA
UNITS WITHOUT ELECTRICAL CONVENIENCE OUTLET
UNIT
549B
036
(3 Tons)
060
(5 Tons)
VOLTAGE
RANGE
COMPRESSOR
OFM
IFM
Min Max
RLA
LRA
FLA
FLA
208/230-1-60
187
254
16.0
88.0
0.7
4.9
208/230-3-60
187
254
10.3
77.0
0.7
4.9
460-3-60
414
508
5.1
39.0
0.4
2.2
208/230-1-60
187
254
23.7
129.0
0.7
4.9
208/230-3-60
187
254
13.5
99.0
0.7
4.9
460-3-60
414
508
7.4
49.5
0.4
2.2
208/230-1-60
187
254
28.8
169.0
1.5
8.8
208/230-3-60
187
254
17.3
123.0
1.5
5.8
460-3-60
414
508
9.0
62.0
0.8
2.6
208/230-3-60
187
254
20.5
156.0
1.4
5.8
460-3-60
414
508
9.6
70.0
0.6
2.6
072
(6 Tons)
ELECTRIC
HEAT*
kW†
—/—
3.3/ 4.4
4.9/ 6.5
6.5/ 8.7
7.9/10.5
9.8/13.0
—/—
3.3/ 4.4
4.9/ 6.5
6.5/ 8.7
7.9/10.5
12.0/16.0
—
6.0
8.8
11.5
14.0
—/—
3.3/ 4.4
6.5/ 8.7
9.8/13.0
13.1/17.4
15.8/21.0
—/—
4.9/ 6.5
6.5/ 8.7
12.0/16.0
15.8/21.0
—
6.0
11.5
14.0
23.0
—/—
4.9/ 6.5
6.5/ 8.7
9.8/13.0
13.1/17.4
15.8/21.0
—/—
4.9/ 6.5
7.9/10.5
12.0/16.0
15.8/21.0
19.9/26.5
—
6.0
11.5
14.0
23.0
25.5
—/—
4.9/ 6.5
7.9/10.5
12.0/16.0
15.8/21.0
19.9/26.5
—
6.0
11.5
14.0
23.0
25.5
91
FLA
—/—
15.9/18.3
23.6/27.1
31.3/36.3
38.0/43.8
47.1/54.2
—/—
9.2/10.6
13.6/15.6
18.0/20.9
21.9/25.3
33.3/38.5
—
7.2
10.6
13.8
16.8
—/—
15.9/18.3
31.3/36.3
47.1/54.2
63.0/72.5
76.0/87.5
—/—
13.6/15.6
18.0/20.9
33.3/38.5
43.9/50.5
—
7.2
13.8
16.8
27.7
—/—
23.6/27.1
31.3/36.3
47.1/54.2
63.0/72.5
76.0/87.5
—/—
13.6/15.6
21.9/25.3
33.3/38.5
43.9/50.5
55.2/63.8
—
7.2
13.8
16.8
27.7
30.7
—/—
13.6/15.6
21.9/25.3
33.3/38.5
43.9/50.5
55.2/63.8
—
7.2
13.8
16.8
27.7
30.7
POWER
SUPPLY
MCA
25.6/ 25.6
45.5/ 48.5
55.1/ 59.5
64.7/ 71.0
73.1/ 80.4
84.5/ 93.4
18.5/ 18.5
30.0/ 31.7
35.5/ 38.0
41.0/ 44.6
45.9/ 50.1
60.1/ 66.6
9.0
18.0
22.2
26.2
30.0
35.2/ 35.2
55.1/ 58.1
74.4/ 80.6
94.1/103.0
114.0/125.9
130.2/144.6
22.5/ 22.5
39.5/ 42.0
45.0/ 48.6
64.1/ 70.6
77.4/ 85.6
11.9
20.9
29.1
32.9
46.5
46.3/ 46.3
75.8/ 80.2
85.4/ 91.7
105.2/114.1
125.1/136.9
141.3/155.7
28.9/ 28.9
45.9/ 48.4
56.3/ 60.6
70.6/ 77.1
83.8/ 92.1
97.9/108.7
14.7
23.7
31.9
35.7
49.3
53.0
32.8/ 32.8
49.8/ 52.3
60.2/ 64.5
74.5/ 81.0
87.7/ 96.0
101.8/112.6
15.2
24.2
32.5
36.2
49.8
53.6
MOCP
30/ 30**
50/ 50**
60/ 60**
70/ 80
80/ 90
90/100
20/ 20**
30/ 35**
40/ 40**
45/ 45**
50/ 60**
70/ 70
15**
20**
25**
30**
30**
40/ 40**
60/ 60**
80/ 90
100/110
125/150
150/150
25/ 25**
40/ 45**
45/ 50**
70/ 80
90/100
15**
25**
30**
35**
50**
50/ 50**
80/ 90
90/100
110/125
150/150
150/175
30/ 30**
50/ 50**
60/ 70
80/ 80
90/100
100/110
15**
25**
35**
40**
50**
60**
35/ 35**
50/ 60**
70/ 70
80/ 90
90/100
110/125
20**
25**
35**
40**
50**
60**
MINIMUM UNIT
DISCONNECT
SIZE
FLA
LRA
25/ 25 101/101
43/ 46 117/120
52/ 56 125/128
61/ 67 133/138
69/ 75 139/145
79/ 87 148/155††
18/ 18
90/ 90
29/ 30
99/101
34/ 36 104/106
39/ 42 108/111
43/ 47 112/116
57/ 63 124/129
9
46
17
53
21
57
25
60
28
63
34/ 34 142/142
52/ 55 158/161
70/ 75 174/179
88/ 96 189/196††
106/117 205/215††
121/134 218/230††
22/ 22 112/112
38/ 40 126/128
43/ 46 130/133
60/ 66 146/151
72/ 80 156/163
12
57
20
64
27
70
31
73
43
84
45/ 45 216/216
72/ 76 240/243
81/ 87 247/252††
99/107 263/270††
117/128 279/289††
132/146 292/304††
28/ 28 168/168
44/ 46 181/183
53/ 57 190/193
67/ 73 201/208
79/ 86 212/218††
92/102 223/232††
14
84
23
92
30
98
34
101
46
112
50
115
32/ 32 200/200
47/ 50 214/216
57/ 61 222/225
70/ 76 233/239
82/ 90 244/251††
95/105 255/264††
15
92
23
99
31
106
34
109
47
120
50
123
50TFQ004-012
549B036-120
048
(4 Tons)
NOMINAL
VOLTAGE
(V-Ph-Hz)
ELECTRICAL DATA (cont)
UNITS WITHOUT ELECTRICAL CONVENIENCE OUTLET (cont)
NOMINAL
VOLTAGE
(V-Ph-Hz)
UNIT
549B
VOLTAGE
COMPRESSOR OFM IFM
RANGE
Min Max
RLA
LRA
FLA FLA
254
12.4
88.0
1.4
414
508
6.4
44.0
0.7
208/230-3-60 187
254
19.3
123.0
1.4
508
10.0
62.0
0.7
208/230-3-60 187
090***
(71/2 Tons)
460-3-60
50TFQ004-012
549B036-120
ELECTRIC
HEAT*
120***
(10 Tons)
460-3-60
414
MINIMUM UNIT
DISCONNECT
SIZE
MOCP
FLA
LRA
40/ 40** 40/ 40 242/242
70/ 70
65/ 69 264/267
80/ 90
79/ 85 275/281††
110/125
100/109 294/302††
125/150
117/129 309/319††
150/175
142/158 330/344††
20**
20
121
45**
39
138
45**
43
141
70
59
155
70
66
161
90
78
171
60/ 60** 60/ 60 337/337
90/ 90
85/ 89 358/362††
100/110
98/104 370/375††
150/175
136/148 403/414††
175/200
161/177 425/439††
200/200
180/198 441/457††
30
30
170
60
53
189
80
69
203
80
76
209
100
88
220††
100
99
230††
POWER
SUPPLY
kW†
FLA
—/—
—/—
7.8/10.4 21.7/ 25.0
7.5 12.0/16.0 33.3/ 38.5
18.6/24.8 51.6/ 59.7
24.0/32.0 66.6/ 77.0
31.8/42.4 88.3/102.0
—
—
13.9
16.7
16.5
19.8
3.4
27.8
33.4
33.0
39.7
41.7
50.2
—/—
—/—
7.8/10.4 21.7/ 25.0
10.6 12.0/16.0 33.3/ 38.5
24.0/32.0 66.6/ 77.0
31.8/42.4 88.3/102.0
37.6/50.0 104.4/120.3
—
—
16.5
19.8
27.8
33.4
4.8
33.0
39.7
41.7
50.2
50.0
60.1
MCA
38.2/ 38.2
65.3/ 69.5
79.8/ 86.3
102.7/112.8
121.5/134.5
148.6/165.7
19.2
40.1
44.0
61.0
68.8
82.0
56.8/ 56.8
84.0/ 88.1
98.5/105.0
140.1/153.1
167.2/184.3
187.3/177.1
28.7
53.3
70.5
78.3
91.5
88.8
LEGEND AND NOTES FOR ELECTRICAL DATA TABLES
FLA
HACR
IFM
LRA
MCA
MOCP
NEC
OFM
RLA
—
—
—
—
—
—
—
—
—
% Voltage Imbalance
max voltage deviation from average voltage
= 100 x
average voltage
Example: Supply voltage is 460-3-60.
LEGEND
Full Load Amps
Heating, Air Conditioning and Refrigeration
Indoor Fan Motor
Locked Rotor Amps
Minimum Circuit Amps
Maximum Overcurrent Protection
National Electrical Code
Outdoor Fan Motor
Rated Load Amps
AB = 452 v
BC = 464 v
AC = 455 v
Average Voltage =
=
452 + 464 + 455
3
1371
3
= 457
Determine maximum deviation from average voltage.
(AB) 457 – 452 = 5 v
(BC) 464 – 457 = 7 v
(AC) 457 – 455 = 2 v
*Used to determine minimum disconnect per NEC.
†Heater capacity (kW) is based on heater voltage of 208 v and 480 v. If
power distribution voltage to unit varies from rated heater voltage,
heater kW will vary accordingly.
**Fuse or HACR circuit breaker.
††Optional disconnect switch cannot be used.
***Units have 2 outdoor fan motors.
Maximum deviation is 7 v.
Determine percent of voltage imbalance.
7
% Voltage Imbalance = 100 x
457
= 1.53%
This amount of phase imbalance is satisfactory as it is below the
maximum allowable 2%.
IMPORTANT: If the supply voltage phase imbalance is more than
2%, contact your local electric utility company immediately.
NOTES:
1. In compliance with NEC requirements for multimotor and combination load and equipment (refer to NEC Articles 430 and 440), the
overcurrent protective device for the unit shall be fuse or HACR
breaker.
2. Unbalanced 3-Phase Supply Voltage
Never operate a motor where a phase imbalance in supply voltage is
greater than 2%. Use the following formula to determine the percent
of voltage imbalance.
92
ELECTRICAL DATA (cont)
UNITS WITH ELECTRICAL CONVENIENCE OUTLET
UNIT
549B
036
(3 Tons)
NOMINAL
VOLTAGE
(V-Ph-Hz)
RLA
LRA
FLA
FLA
16.0
88.0
0.7
4.9
208/230-3-60 187
254
10.3
77.0
0.7
4.9
414
508
5.1
39.0
0.4
2.2
208/230-1-60 187
254
23.7
129.0
0.7
4.9
208/230-3-60 187
254
13.5
99.0
0.7
4.9
414
508
7.4
49.5
0.4
2.2
208/230-1-60 187
254
28.8
169.0
1.5
8.8
208/230-3-60 187
254
17.3
123.0
1.5
5.8
414
508
9.0
62.0
0.8
2.6
208/230-3-60 187
254
20.5
156.0
1.4
5.8
508
9.6
70.0
0.6
2.6
460-3-60
072
(6 Tons)
460-3-60
414
ELECTRIC
HEAT*
kW†
—/—
3.3/ 4.4
4.9/ 6.5
6.5/ 8.7
7.9/10.5
9.8/13.0
—/—
3.3/ 4.4
4.9/ 6.5
6.5/ 8.7
7.9/10.5
12.0/16.0
—
6.0
8.8
11.5
14.0
—/—
3.3/ 4.4
6.5/ 8.7
9.8/13.0
13.1/17.4
15.8/21.0
—/—
4.9/ 6.5
6.5/ 8.7
12.0/16.0
15.8/21.0
—
6.0
11.5
14.0
23.0
—/—
4.9/ 6.5
6.5/ 8.7
9.8/13.0
13.1/17.4
15.8/21.0
—/—
4.9/ 6.5
7.9/10.5
12.0/16.0
15.8/21.0
19.9/26.5
—
6.0
11.5
14.0
23.0
25.5
—/—
4.9/ 6.5
7.9/10.5
12.0/16.0
15.8/21.0
19.9/26.5
—
6.0
11.5
14.0
23.0
25.5
93
FLA
—/—
15.9/18.3
23.6/27.1
31.3/36.3
38.0/43.8
47.1/54.2
—/—
9.2/10.6
13.6/15.6
18.0/20.9
21.9/25.3
33.3/38.5
—
7.2
10.6
13.8
16.8
—/—
15.9/18.3
31.3/36.3
47.1/54.2
63.0/72.5
76.0/87.5
—/—
13.6/15.6
18.0/20.9
33.3/38.5
43.9/50.5
—
7.2
13.8
16.8
27.7
—/—
23.6/27.1
31.3/36.3
47.1/54.2
63.0/72.5
76.0/87.5
—/—
13.6/15.6
21.9/25.3
33.3/38.5
43.9/50.5
55.2/63.8
—
7.2
13.8
16.8
27.7
30.7
—/—
13.6/15.6
21.9/25.3
33.3/38.5
43.9/50.5
55.2/63.8
—
7.2
13.8
16.8
27.7
30.7
POWER
SUPPLY
MCA
30.4/ 30.4
50.3/ 53.3
59.9/ 64.3
69.5/ 75.8
77.9/ 85.2
89.3/ 98.2
23.3/ 23.3
34.8/ 36.5
40.3/ 42.8
45.8/ 49.4
50.7/ 54.9
64.9/ 71.4
11.2
20.2
24.4
28.4
32.2
40.0/ 40.0
59.9/ 62.9
79.2/ 85.4
98.9/107.8
118.8/130.7
135.0/149.4
27.3/ 27.3
44.3/ 46.8
49.8/ 53.4
68.9/ 75.4
82.2/ 90.4
14.0
23.0
31.3
35.0
48.7
51.1/ 51.1
80.6/ 85.0
90.2/ 96.5
110.0/118.9
129.9/141.7
146.1/160.5
33.7/ 33.7
50.7/ 53.2
61.1/ 65.4
75.4/ 81.9
88.6/ 96.9
102.7/113.5
16.8
25.8
34.1
37.8
51.5
55.2
37.6/ 37.6
54.6/ 57.1
65.0/ 69.3
79.3/ 85.8
92.5/100.8
106.6/117.4
17.4
26.4
34.6
38.4
52.0
55.8
MOCP
35/ 35**
60/ 60**
60/ 70
70/ 80
80/ 90
90/100
25/ 25**
35/ 40**
45/ 45**
50/ 50**
60/ 60**
70/ 80
15**
25**
25**
30**
35**
45/ 45**
60/ 70
80/ 90
100/110
125/150
150/150
30/ 30**
45/ 50**
50/ 60**
70/ 80
90/100
15**
25**
35**
40**
50**
60/ 60**
90/ 90
100/100
110/125
150/150
150/175
35/ 35**
60/ 60**
70/ 70
80/ 90
90/100
110/125
20**
30**
35**
40**
60**
60**
40/ 40**
60/ 60**
70/ 70
80/ 90
100/110
110/125
20**
30**
35**
40**
60**
60**
MINIMUM UNIT
DISCONNECT
SIZE
FLA
LRA
30/ 30
106/106
49/ 51
122/124
58/ 62
130/133
66/ 72
137/142
74/ 81
144/150††
85/ 93
153/160††
24/ 24
95/ 95
34/ 36
104/106
39/ 42
109/111
45/ 48
113/116
49/ 53
117/120
62/ 68
128/134
11
48
20
55
24
59
27
62
31
65
39/ 39
147/147
58/ 60
163/165
75/ 81
178/183††
93/102
194/201††
112/123
210/220††
127/140
223/235††
27/ 27
117/117
43/ 45
131/133
48/ 52
135/138
66/ 72
150/156
78/ 86
161/168††
14
59
22
66
30
73
33
76
46
86
50/ 50
221/221
78/ 82
245/248††
86/ 92
252/257††
105/113
268/275††
123/134
284/293††
138/151
297/308††
34/ 34
173/173
49/ 52
186/188
59/ 63
194/198
72/ 78
206/211
84/ 92
216/223††
97/107
228/236††
17
87
25
94
33
100
36
103
49
114
52
117
37/ 37
205/205
53/ 55
219/221
63/ 66
227/230
76/ 82
238/243††
88/ 95
249/255††
101/111
260/269††
17
94
26
101
33
108
37
111
49
122
53
125
50TFQ004-012
549B036-120
254
460-3-60
060
(5 Tons)
Min Max
208/230-1-60 187
460-3-60
048
(4 Tons)
VOLTAGE
RANGE COMPRESSOR OFM IFM
ELECTRICAL DATA (cont)
UNITS WITH ELECTRICAL CONVENIENCE OUTLET (cont)
NOMINAL
VOLTAGE
(V-Ph-Hz)
UNIT
549B
VOLTAGE
RANGE COMPRESSOR OFM IFM
Min Max
RLA
LRA
FLA FLA
208/230-3-60 187 254
12.4
88.0
1.4
414 508
6.4
44.0
0.7
208/230-3-60 187 254
19.3
123.0
1.4
10.0
62.0
0.7
090***
(71/2 Tons)
50TFQ004-012
549B036-120
460-3-60
120***
(10 Tons)
460-3-60
414 508
ELECTRIC
HEAT*
MINIMUM UNIT
DISCONNECT
SIZE
MOCP
FLA
LRA
45/ 45** 46/ 46 247/247
80/ 80
71/ 75 269/272
90/100
84/ 90 280/285††
110/125 105/115 298/307††
150/150 122/134 313/324††
175/175 147/163 335/349††
25**
23
123
45**
42
140
50**
46
143
70
61
157
80
68
163
90
80
174††
70/ 70
65/ 65 341/341
90/100
90/ 94 363/366††
110/110 104/110 375/380††
150/175 142/154 408/418††
175/200 167/183 430/443††
200/200 185/204 446/462††
35**
33
172
60**
55
191
80
71
205
90
78
211
100
90
222††
100
102
232††
POWER
SUPPLY
kW†
FLA
—/—
—/—
7.8/10.4 21.7/ 25.0
7.5 12.0/16.0 33.3/ 38.5
18.6/24.8 51.6/ 59.7
24.0/32.0 66.6/ 77.0
31.8/42.4 88.3/102.0
—
—
13.9
16.7
16.5
19.8
3.4
27.8
33.4
33.0
39.7
41.7
50.2
—/—
—/—
7.8/10.4 21.7/ 25.0
10.6 12.0/16.0 33.3/ 38.5
24.0/32.0 66.6/ 77.0
31.8/42.4 88.3/102.0
37.6/50.0 104.4/120.3
—
—
16.5
19.8
27.8
33.4
4.8
33.0
39.7
41.7
50.2
50.0
60.1
MCA
43.0/ 43.0
70.1/ 74.3
84.6/ 91.1
107.5/117.6
126.3/139.3
153.4/170.5
21.4
42.3
46.1
63.1
71.0
84.1
61.6/ 61.6
88.8/ 92.9
103.3/109.6
144.9/157.9
172.0/189.1
192.1/181.9
30.9
55.6
72.6
80.5
93.6
91.0
LEGEND AND NOTES FOR ELECTRICAL DATA TABLES
FLA
HACR
IFM
LRA
MCA
MOCP
NEC
OFM
RLA
—
—
—
—
—
—
—
—
—
% Voltage Imbalance
max voltage deviation from average voltage
= 100 x
average voltage
Example: Supply voltage is 460-3-60.
LEGEND
Full Load Amps
Heating, Air Conditioning and Refrigeration
Indoor Fan Motor
Locked Rotor Amps
Minimum Circuit Amps
Maximum Overcurrent Protection
National Electrical Code
Outdoor Fan Motor
Rated Load Amps
AB = 452 v
BC = 464 v
AC = 455 v
Average Voltage =
=
452 + 464 + 455
3
1371
3
= 457
Determine maximum deviation from average voltage.
(AB) 457 – 452 = 5 v
(BC) 464 – 457 = 7 v
(AC) 457 – 455 = 2 v
*Used to determine minimum disconnect per NEC.
†Heater capacity (kW) is based on heater voltage of 208 v and 480 v. If
power distribution voltage to unit varies from rated heater voltage,
heater kW will vary accordingly.
**Fuse or HACR circuit breaker.
††Optional disconnect switch cannot be used.
***Units have 2 outdoor fan motors.
Maximum deviation is 7 v.
Determine percent of voltage imbalance.
7
% Voltage Imbalance = 100 x
457
= 1.53%
This amount of phase imbalance is satisfactory as it is below the
maximum allowable 2%.
IMPORTANT: If the supply voltage phase imbalance is more than
2%, contact your local electric utility company immediately.
NOTES:
1. In compliance with NEC requirements for multimotor and combination load and equipment (refer to NEC Articles 430 and 440), the
overcurrent protective device for the unit shall be fuse or HACR
breaker.
2. Unbalanced 3-Phase Supply Voltage
Never operate a motor where a phase imbalance in supply voltage is
greater than 2%. Use the following formula to determine the percent
of voltage imbalance.
94
TYPICAL WIRING SCHEMATIC
50TFQ004-012
549B036-120
549B036-120
95
TYPICAL WIRING SCHEMATIC (cont)
LEGEND FOR TYPICAL WIRING SCHEMATIC
50TFQ004-012
549B036-120
IMPORTANT: Consult unit wiring label for actual wiring schematic.
AHA —
AWG —
C
—
CAP —
CB
—
CC
—
CLO —
COMP —
DB
—
DFT —
ECON —
FPT —
FSS —
FU
—
GND —
HC
—
HPS —
HR
—
IFC
—
IFM
—
LPS —
LSM —
MTR —
OAT —
OFM —
P
—
PL
—
QT
—
R
—
RAT —
Adjustable Heat Anticipator
American Wire Gage
Contactor, Compressor
Capacitor
Circuit Breaker
Cooling Compensator
Compressor Lockout
Compressor Motor
Defrost Board
Defrost Thermostat
Economizer
Freeze-Up Protection Thermostat
Filter Status Switch
Fuse
Ground
Heater Contactor (Strip Heat)
High-Pressure Switch
Heater Relay
Indoor-Fan Contactor
Indoor-Fan Motor
Low-Pressure Switch
Limit Switch (Manual Reset)
Motor
Outdoor-Air Thermostat
Outdoor-Fan Motor
Plug
Plug Assembly
Quadruple Terminal
Relay
Return-Air Thermostat
RVS
SAT
SW2
SW3
TB
TC
TH
TRAN
—
—
—
—
—
—
—
—
Reversing Valve Solenoid
Supply Air Thermostat
Switch, Fully Closed
Switch, Minimum Vent Position
Terminal Block
Thermostat-Cooling
Thermostat-Heating
Transformer
Field Splice
Marked Wire
Terminal (Marked)
Terminal (Unmarked)
Terminal Block
Splice
Splice (Marked)
Factory Wiring
Field Control Wiring
Field Power Wiring
Accessory or Optional Wiring
To indicate common potential only,
not to represent wiring
NOTES:
1. If any of the original wire furnished must be replaced, it must be
replaced with type 90 C wire or its equivalent.
2. Three phase motors are protected under primary single phasing
conditions.
3. Thermostat:
HH07AT170, 172, 174
Subbase:
HH93AZ176
4. Set heat anticipator at .8 amp for 1st stage & .3 amp for 2nd stage.
5. Use copper conductors only.
6. Use copper, copper clad aluminum. or aluminum conductors.
7.
CB
VOLTAGE
MUST
RATING
HFG. PT. NO.
TRIP
POTTER & BRUNFIELD AMPS
24V
W2BX-1024-3.2
3.2
96
GUIDE SPECIFICATIONS — 548F AND 549B036-120 UNITS
97
50TFQ004-012
548F/549B036-120
3. Cabinet panels shall be easily removable for
servicing.
4. Holes shall be provided in the base rails for rigging
shackles to facilitate maneuvering and overhead
rigging.
5. Unit shall have a factory-installed, sloped condensate drain pan made of a non-corrosive material, providing a minimum 3/4-in.-14 NPT. connection with
both vertical and horizontal drains, and shall comply
with ASHRAE Standard 62.
6. Unit shall have a factory-installed filter access panel
to provide filter access with tool-less removal.
7. Unit shall have standard thru-the-bottom power connection capability (accessory kit is required).
C. Fans:
1. Indoor Fan:
a. Fan shall be direct or belt driven as shown on the
equipment drawings. Belt drive shall include an
adjustable-pitch motor pulley.
b. Fan wheel shall be double-inlet type with forwardcurved blades.
c. Bearings shall be sealed, permanently lubricated
ball-bearing type for longer life and lower
maintenance.
2. Indoor fan shall be made from steel with a corrosionresistant finish and shall be dynamically balanced.
3. Outdoor fan shall be of the direct-driven (with totally
enclosed motors) propeller type and shall discharge
air vertically.
4. Outdoor fan shall have aluminum blades riveted to
corrosion-resistant steel spiders and shall be dynamically balanced.
D. Compressor(s):
1. Fully hermetic type, internally protected, scroll or
reciprocating type.
2. Factory mounted on rubber grommets and internally
spring mounted for vibration isolation.
3. On independent circuits (548F090-120 and
549B090,120).
E. Coils:
1. Standard indoor and outdoor coils shall have copper
or aluminum plate fins mechanically bonded to
seamless internally grooved copper tubes with all
joints brazed.
2. Coils:
a. Copper-fin coils shall be constructed of copper
fins mechanically bonded to copper tubes and
copper tube sheets. Galvanized steel tube sheets
shall not be acceptable. A polymer strip shall prevent coil assembly from contacting the sheet
metal coil pan to minimize potential for galvanic
corrosion between coil and pan. All copper construction shall provide protection in moderate
coastal environments.
PACKAGED ROOFTOP AIR-TO-AIR HEAT PUMP —
CONSTANT VOLUME APPLICATION
HVAC GUIDE SPECIFICATIONS
SIZE RANGE: 3 TO 10 TONS, NOMINAL (COOLING)
BRYANT MODEL NUMBER: 548F,
549B
PART 1 — General
1.01 SYSTEM DESCRIPTION
Outdoor rooftop mounted, electrically controlled air-to-air
heat pump unit utilizing a hermetic reciprocating (548F) or
scroll (549B) compressor for cooling and heating duty and
electric resistance coils for auxiliary heating duty. Unit shall
discharge supply air vertically or horizontally as shown on
contract drawings.
1.02 QUALITY ASSURANCE
A. Unit shall be rated in accordance with ARI Standards 210/
240 or 360 and 270. Designed in accordance with UL
Standard 1995.
B. Unit shall be designed to conform to ASHRAE 15, latest
revision.
C. Unit shall be UL-tested and certified in accordance
with ANSI Z21.47 Standards and UL-listed and certified
under Canadian standards as a total package for safety
requirements.
D. Roof curb shall be designed to conform to NRCA
Standards.
E. Insulation and adhesive shall meet NFPA 90A requirements for flame spread and smoke generation.
F. Unit casing shall be capable of withstanding 500-hour salt
spray exposure per ASTM B117 (scribed specimen).
G. Unit shall be designed in accordance with ISO 9001, and
shall be manufactured in a facility registered to ISO 9002/
BS5750, Part 2.
H. Each unit shall be subjected to a completely automated
run testing on the assembly line. Units contain a factorysupplied printout indicating tested pressures, amperages,
data, and inspectors; providing certification of the unit
status at the time of manufacture.
1.03 DELIVERY, STORAGE, AND HANDLING
Unit shall be stored and handled per manufacturer’s
recommendations.
PART 2 — Products
2.01 EQUIPMENT (STANDARD)
A. General:
Factory assembled, single-piece heat pump unit. Contained within the unit enclosure shall be all factory wiring,
piping, controls, refrigerant charge (R-22), and special
features required prior to field start-up.
B. Unit Cabinet:
1. Unit cabinet shall be constructed of galvanized steel,
and shall be bonderized and coated with a prepainted baked enamel finish on all externally
exposed surfaces.
2. Indoor fan compartment interior cabinet surfaces
shall be insulated with a minimum 1/2-in. thick,
1 lb. density, flexible fiberglass insulation, neoprene
coated on the air side. Aluminum foil-faced fiberglass
insulation shall be used in the gas heat
compartment.
50TFQ004-012
548F/549B036-120
GUIDE SPECIFICATIONS — 548F AND 549B036-120 UNITS (cont)
b. E-Coated aluminum-fin coils shall have a flexible
epoxy polymer coating uniformly applied to all coil
surface areas without material bridging between
fins. Coating process shall ensure complete coil
encapsulation. Color shall be high gloss black
with gloss — 60 deg of 65 to 90% per ASTM
D523-89. Uniform dry film thickness from 0.8 to
1.2 mil on all surface areas including fin edges.
Superior hardness characteristics of 2H per
ASTM D3363-92A and cross-hatch adhesion of
4B-5B per ASTM D3359-93. Impact resistance
shall be up to 160 in.-lb (ASTM D2794-93).
Humidity and water immersion resistance shall be
up to minimum 1000 and 250 hours respectively
(ASTM D2247-92 and ASTM D870-92). Corrosion durability shall be confirmed through testing
to be no less than 1000 hours salt spray per
ASTM B117-90. Coil construction shall be aluminum fins mechanically bonded to copper tubes.
c. E-Coated copper-fin coils shall have a flexible
epoxy polymer coating uniformly applied to all coil
surface areas without material bridging between
fins. Coating process shall ensure complete coil
encapsulation. Color shall be high gloss black
with gloss — 60 deg of 65 to 90% per ASTM
D523-89. Uniform dry film thickness from 0.8 to
1.2 mil on all surface areas including fin edges.
Superior hardness characteristics of 2H per
ASTM D3363-92A and cross-hatch adhesion of
4B-5B per ASTM D3359-93. Impact resistance
shall be up to 160 in.-lb (ASTM D2794-93).
Humidity and water immersion resistance shall be
up to minimum 1000 and 250 hours respectively
(ASTM D2247-92 and ASTM D870-92). Corrosion durability shall be confirmed through testing
to be no less than 1000 hours salt spray per
ASTM B117-90. Coil construction shall be copper
fins mechanically bonded to copper tubes with
copper tube sheets. Galvanized steel tube sheets
shall not be acceptable. A polymer strip shall prevent coil assembly from contacting sheet metal
coil pan to maintain coating integrity and minimize
corrosion potential between coil and pan.
d. Optional pre-coated aluminum-fin coils shall have
a durable epoxy-phenolic coating to provide protection in mildly corrosive coastal environments.
Coating shall be applied to the aluminum fin stock
prior to the fin stamping process to create an inert
barrier between the aluminum fin and copper
tube. Epoxy-phenolic barrier shall minimum galvanic action between dissimilar metals.
F. Heating Section:
1. May be equipped with field-installed electric resistance heater(s) of the characteristics shown in the
equipment schedule.
2. Heater elements shall be open wire, adequately supported and insulated with ceramic bushings.
G. Refrigerant Components:
Refrigerant circuit components shall include:
1. Fixed orifice metering system.
2. Refrigerant filter drier.
3. Reversing valve.
4. Service gage connections on suction, discharge, and
liquid lines.
H. Filter Section:
1. Standard filter section shall consist of factoryinstalled, low velocity, throwaway 2-in. thick fiberglass
filters of commercially available sizes.
2. Filter face velocity shall not exceed 320 fpm at nominal airflows.
3. Filter section should use only one size filter.
4. Filters shall be accessible through an access panel
with “no-tool” removal.
I. Controls and Safeties:
1. Unit Controls:
Unit shall be complete with self-contained lowvoltage control circuit protected by a fuse on the 24-v
transformer side (090-120 units have a resettable circuit breaker).
2. Safeties:
a. Unit shall incorporate a solid-state compressor
protector which provides anti-cycle reset capability at the space thermostat, should any of the following standard safety devices trip and shut off
compressor.
1) Compressor overtemperature, overcurrent.
2) Loss-of-charge/low-pressure switch.
3) Freeze-protection thermostat, evaporator coil.
4) High-pressure switch.
5) Automatic reset motor thermal overload
protector.
The lockout protection shall be easily disconnected at the control board, if necessary.
b. Heating section shall be provided with the following minimum protections:
1) High-temperature limit switches.
2) Overcurrent protection.
c. Unit shall incorporate an outdoor coil defrost system to prevent excessive frost accumulation during heating duty, and shall be controlled as
follows:
1) Defrost shall be initiated on the basis of time
and coil temperature.
2) A 30/50/90-minute timer shall activate defrost
cycle only if the coil temperature is low enough
to indicate a heavy frost condition.
3) Defrost cycle shall terminate when defrost
thermostats are satisfied and shall have a positive termination time of 10 minutes.
J. Operating Characteristics:
1. Unit shall be capable of starting and running at 115 F
(548F) or 125 F (549B) ambient outdoor temperature, meeting maximum load criteria of ARI Standard
210/240 or 360 at +10% voltage.
2. Compressor with standard controls shall be capable
of operation down to 25 F (in cooling mode) ambient
outdoor temperature.
3. Compressor with optional controls shall be capable
of operation down to –20 F (in heating mode) ambient outdoor temperature.
4. Unit shall be capable of simultaneous heating duty
and defrost cycle operation when using accessory
electric heaters.
98
GUIDE SPECIFICATIONS — 548F AND 549B036-120 UNITS (cont)
*5. 100% Two-Position Damper:
a. Two-position damper package shall include single
blade damper and motor. Admits up to 100% outdoor air.
b. Damper shall close upon indoor (evaporator) fan
shutoff.
c. Designed to close damper during loss of power
situations.
d. Equipped with 15% barometric relief damper.
*6. 25% Two-Position Damper:
a. Two-position damper package shall include single
blade damper and motor. Admits up to 25% outdoor air.
b. Damper shall close upon indoor fan shutoff.
*7. Head Pressure Control Package:
Consists of solid-state control and condenser-coil
temperature sensor to maintain condensing temperature between 90 F and 110 F at outdoor ambient
temperatures down to –20 F by condenser-fan speed
modulation or condenser-fan cycling and wind
baffles.
*8. Electric Resistance Heaters:
a. Open wire nichrome elements with all necessary
safety operating controls.
b. UL listed and indicated on basic unit information
plate.
c. Available in multiples to match heating requirements.
d. Single point kits available for each heater when
required.
*9. Electronic Programmable Thermostat:
Capable of using deluxe full-featured electronic thermostat. Shall use built-in compressor cycle delay
control for both heating and cooling duty.
*10. Thermostat and Subbase:
Provides staged cooling and heating automatic (or
manual) changeover, fan control, and indicator light.
*11. Outdoor Coil Hail Guard Assembly:
Hail guard shall protect against damage from hail
and flying debris.
*12. Unit-Mounted, Non-Fused Disconnect Switch:
Shall be factory-installed, internally mounted. NEC
and UL approved non-fused switch shall provide unit
power shutoff. Shall be accessible from outside the
unit and shall provide power off lockout capability.
*13. Convenience Outlet:
Shall be factory-installed and internally mounted with
easily accessible 115-v female receptacle. Shall
include 15 amp GFI receptacle with independent
fuse protection. Voltage required to operate convenience outlet shall be provided by a factory-installed
step-down transformer. Shall be accessible from outside the unit.
*14. Outdoor Coil Grille:
The grille protects the outdoor coil from damage by
large objects without increasing unit clearances.
99
50TFQ004-012
548F/549B036-120
K. Electrical Requirements:
All unit power wiring shall enter unit cabinet at a single
factory-predrilled location.
L. Motors:
1. Compressor motors shall be cooled by refrigerant
gas passing through motor windings and shall have
line break thermal and current overload protection.
2. Indoor-fan motor shall have permanently lubricated
bearings and inherent automatic-reset thermal overload protection.
3. Totally enclosed outdoor-fan motor shall have permanently lubricated bearings, and inherent automaticreset thermal overload protection.
M. Special Features:
Certain features are not applicable when the features
designated * are specified. For assistance in amending
the specifications, contact your local Bryant Sales Office.
1. Roof Curbs (Horizontal and Vertical):
a. Formed galvanized steel with wood nailer strip
and shall be capable of supporting entire unit
weight.
b. Permits installation and securing of ductwork to
curb prior to mounting unit on the curb.
*2. Integrated Economizers:
a. Integrated integral modulating type capable
of simultaneous economizer and compressor
operation.
b. Includes all hardware and controls to provide
cooling with outdoor air.
c. Equipped with low-leakage dampers, not to exceed
3% leakage at 1 in. wg pressure differential.
d. Capable of introducing up to 100% outdoor air.
e. EconoMi$er shall be equipped with a barometric
relief damper.
f. Designed to close damper(s) during loss-ofpower situations with spring return built into
motor.
g. Dry bulb outdoor-air temperature sensor shall be
provided as standard. Enthalpy, differential temperature, and differential enthalpy control shall be
provided as an option.
h. EconoMi$er is a gear-driven parallel blade
design.
i. EconoMi$er shall provide control of internal building pressure through its accessory two-stage
power exhaust function.
j. EconoMi$er shall be capable of control from a 4
to 20 mA signal.
3. 25% Manual Outdoor-Air Damper:
Manual damper package shall consist of damper,
birdscreen, and rainhood which can be preset
to admit up to 25% outdoor air for year-round
ventilation.
*4. 50% Manual Outdoor-Air Damper:
Manual damper package shall consist of damper,
birdscreen, and rainhood which can be preset
to admit up to 50% outdoor air for year-round
ventilation.
50TFQ004-012
548F/549B036-120
GUIDE SPECIFICATIONS — 548F AND 549B036-120 UNITS (cont)
15. Compressor Cycle Delay:
Unit shall be prevented from restarting for minimum
of 5 min. after shutdown.
*16. Thru-the-Bottom Utility Connectors:
Kit shall provide connectors to permit electrical connections to be brought to the unit through the
basepan.
*17. Fan/Filter Status Switch:
Provides status of indoor (evaporator) fan (ON/OFF)
or filter (CLEAN/DIRTY). Status shall be displayed
over communication bus when used with direct
digital controls or with an indicator light at the
thermostat.
*18. Solid-State Enthalpy Control:
a. For use with Durablade economizer package only.
b. Capable of sensing outdoor-air enthalpy content
(temperature and humidity) and controlling economizer cut-in point to have minimum heat content
air passing over the indoor coil for most efficient
system operation.
*19. Differential Enthalpy Sensor:
a. For use with Durablade economizer only.
b. Capable of comparing enthalpy content (temperature and humidity) of outdoor and indoor air and
controlling economizer cut-in point at the most
economical level.
*20. EconoMi$er with Power Exhaust:
Package shall provide control of internal building
pressure. The two-stage system shall exhaust up to
100% of return air (vertical only).
*21. Two-Stage
Power
Exhaust
Accessory
for
EconoMi$er:
Power exhaust shall be used in conjunction with
EconoMi$er to provide system exhaust of up to
100% of return air. The power exhaust is a
field-installed accessory (vertical and horizontal
applications).
The individual fans are energized through the end
switches located in the actuator, which will open as
the outdoor-air damper opens. These end switches
are factory set for 30 and 70% of outdoor-air, and
can be set to meet specific job requirements.
*22. Outdoor Air Enthalpy Sensor:
The outdoor air enthalpy sensor shall be used with
the EconoMi$er device to provide single enthalpy
control. When used in conjunction with a return air
enthalpy sensor, the EconoMi$er device will provide
differential enthalpy control. The sensor allows the
EconoMi$er controller to determine if outside air is
suitable for free cooling.
*23. Return Air Enthalpy Sensor:
The return air enthalpy sensor shall be used with the
EconoMi$er device. When used in conjunction with
an outdoor air enthalpy sensor, the EconoMi$er
device will provide differential enthalpy control.
*24. Return Air Temperature Sensor:
The return air temperature sensor shall be used with
the EconoMi$er device. When used in conjunction
with the standard outdoor air temperature sensor,
the EconoMi$er device will provide differential temperature control.
*25. Power Exhaust Auxiliary Transformer:
Field-installed 460v to 230v transformer to provide
power to the 230v power exhaust when attached to a
460v rooftop unit.
*26. Ultra-Violet Germicidal Lamps:
Ultra-violet germicidal lamps are designed to eliminate odor causing mold and fungus that may develop
in the wet area of the evaporator section of the unit.
The high output, low temperature germicidal lamps
are field installed in the evaporator section of the
unit, aimed at the evaporator coil and condensate
pan. The short wavelength ultra-violet light inhibits
and kills mold, fungus and microbial growth. The
lamps have an output rating at 45 F in 400 fpm airflow of 120 microwatts/cm2 at 1 meter.
*27. Hinged Panel Option (549B only):
Hinged panel option provides hinged access panels
for the filter, compressor, evaporator fan, and control
box areas. Filter hinged panels permit tool-less entry
for changing filters. Each hinged panel is permanently attached to the rooftop unit.
28. Emergency Heat Control Package:
When mechanical heating is locked out, auxiliary
heat shall be activated when necessary.
29. Alternate Motors and/or Drives 548F036-060, 090,
120):
Alternate motors and drives shall be factory-installed
to provide additional performance range.
30. High-Static Motor(s) and Drive(s) (548F036-120):
High-static motor(s) and drive(s) shall be factoryinstalled to provide and additional performance
range.
100
MODEL NUMBER NOMENCLATURE — 542J150,180 UNITS
542J
E
X
150
542J – High-Efficiency Rooftop Units
Electric Heat Pumps
000
AB
H
B
Fan Drive Position
(Standard Motor)
B – Standard Low-Medium
Fan Drive Static Capability
D – Alternate High Fan
Drive Static Capability
Voltage Designation
E – 460-3-60
P – 208/230-3-60
Heat Type
X – No Heat Installed
Factory-Installed Outdoor
Air Upgrade Options
C – Economizer
H – 25% Manual Damper
Nominal Cooling Capacity
150 – 12 Tons
180 – 15 Tons
Electric Heaters
000 – No Factory-Installed Electric Heaters
Accessory Field-Installed Electric Heaters
Available
Design Series Code
AB – EconoMi$er Design Change
50TFQ004-012
542J150,180
101
ARI* CAPACITY RATINGS
542J150,180 UNITS
UNIT
542J
150
180
COP
db
EER
ESP
IPLV
kW
wb
—
—
—
—
—
—
—
COOLING
Net
Capacity
Cfm
(Btuh)
140,000
4500
172,000
5200
Total
kW
14.3
18.5
IPLV
EER
12.4
9.7
9.8
9.3
HEATING-HIGH TEMP
Total
Total
Capacity
COP
kW
(Btuh)
136,000
12.4
3.2
172,000
15.3
3.3
HEATING-LOW TEMP
Total
Total
Capacity
COP
kW
(Btuh)
72,000
10.0
2.1
90,000
12.5
2.2
*Air-Conditioning and Refrigeration Institute.
NOTES:
542J units are rated in accordance with ARI Standard 340.
PHYSICAL DATA
WEIGHT DISTRIBUTION AND CENTER OF GRAVITY
WEIGHT
Kg
150
180
1615
1925
733
874
Lb
366
464
Kg
166
211
WEIGHT OF CORNER
B
C
Lb
Kg
Lb
Kg
356 161 360 163
496 225 477 217
D
Lb
534
487
50TFQ004-012
542J150,180
Lb
A
87
88
Cooling ratings are net values, reflecting the effects of circulating fan
heat. Ratings are based on:
ESP: –.35 in. wg
Cooling Standard: 80 F db, 67 wb indoor coil entering-air temperature
and 95 F outdoor entering-air temperature.
High-Temp Heating Standard: 70 F db indoor coil entering-air temperature and 47 F db, 43 F wb outdoor coil entering-air temperature.
Low-Temp Heating Standard: 70 F db indoor coil entering-air temperature and 17 F db, 15 F wb outdoor coil entering-air temperature.
IPLV Standard: 80 F db, 67 F wb indoor entering-air temperature and
80 F db outdoor entering-air temperature.
LEGEND
Coefficient of Performance
Dry Bulb
Energy Efficiency Ratio
External Static Pressure
Integrated Part-Load Value
Kilowatts
Wet Bulb
UNIT
542J
SOUND
RATING
(decibels)
102
X
Kg
242
221
ft-in.
3′-1″
3′-6″
mm
947
1059
DIMENSIONS
Y
ft-in.
mm
3′-2″
965
3′-8″ 1105
Z
ft-in.
mm
1′-10″
559
1′-10″
559
PHYSICAL DATA (cont)
542J150,180
UNIT 542J
OPERATING WT (lb)
Unit
Electric Heat
EconoMi$er
Roof Curb*
COMPRESSOR
Model Number (Quantity)
Cylinders
Capacity Staging (%)
Oil Change (oz)
REFRIGERANT TYPE
Charge (lb)
System 1
System 2
OUTDOOR COIL
Rows
Fins/in.
Total Face Area (sq ft)
OUTDOOR FAN
Nominal Cfm
Number...Diameter (in.)
Motor Hp (1075 Rpm)
Watts Input (Total)
INDOOR COIL
Rows
Fins/in.
Total Face Area (sq ft)
INDOOR FAN
Quantity...Size (in.)
Nominal Cfm
Fan Rpm Range
Motor Nominal Rpm
Maximum Allowable Rpm
Motor Pulley Pitch Diameter (in.)
Fan Pulley Pitch Diameter (in.)
Belt, Quantity...Type...Length (in.)
Pulley Center Line Distance (in.)
Factory Setting
Factory Speed Setting
Motor Hp (Service Factor)
Motor Frame Size
Motor Efficiency
HIGH-PRESSURE SWITCH
Cutout (psig)
Reset (psig)
LOW-PRESSURE/LOSS-OF-CHARGE SWITCH
Cutout (psig)
Reset (psig)
FREEZE PROTECTION THERMOSTAT (F)
Opens
Closes
AIR INLET SCREENS
RETURN-AIR FILTERS (Type)
Quantity...Size (in.)
POWER EXHAUST
180
1615
65
80
200
1925
65
80
200
Semi-Hermetic
06D-328 (1)
6
0,66,100
11
06D-818 (2)
4
0,50,100
88 (each)
R-22
26.0
16.5
—
16.5
3/ in. Enhanced Copper Tubes, Aluminum Lanced or Copper Plate Fins
8
3
3
15
15
21.7
21.7
Propeller Type, Direct Drive
9,000
9,000
3...22
3...22
1/
STD
ALT
STD
ALT
STD
ALT
STD
ALT
STD
ALT
1/
2
2
1090
1090
3/ -in. Enhanced Copper Tubes, Aluminum Double Wavy or Copper Plate Fins, Face Split
8
3
3
15
15
17.5
17.5
Centrifugal, Adjustable Pitch Belt Drive
2...10 x 10
2...12 x 12
5000
6000
891-1179
817-1038
1227-1559
1082-1303
1725
1745
1550
1550
3.1-4.1
3.7-4.7
3.7-4.7
4.9-5.9
6.0
7.9
5.2
7.9
1...BX...42
1...BX...46
1...BX...42
1...BX...50
13.5-15.5
13.3-14.8
3.5
3.5
1035
934
1389
1199
3.7 (1.15)
5 (1.15)
56H
184T
0.86
0.875
426
320
7
22
30 ± 5
45 ± 5
Cleanable
2...20 x 25 x 1
1...20 x 20 x 1
10% Efficient — 2-in. Throwaway Fiberglass
4...20 x 20 x 2
4...16 x 20 x 2
1/2 Hp 208/230 or 460 V Motor, Direct Drive Propeller Fan (Factory Wired for 460 V)
LEGEND
Al — Aluminum
Cu — Copper
*Weight of 14 in. roof curb
103
50TFQ004-012
542J150,180
Economizer, Quantity...Size (in.)
150
BASE UNIT DIMENSIONS
MAXIMUM SHIPPING WEIGHT*
Lb
Kg
1895
860
2205
1000
UNIT
542J
150
180
*Units with aluminum indoor and outdoor coil fins.
DIMENSIONS
UNIT
542J
X
Ft-in.
3-1
3-6
150
180
KO
Y
mm
947
1059
Ft-in.
3-2
3-8
mm
965
1105
LEGEND
— Knockout
NOTES:
1. Dimensions in [
2.
3.
] are in millimeters.
Center of gravity.
Direction of airflow.
50TFQ004-012
542J150,180
4. Ductwork to be attached to accessory roof curb only.
5. Minimum clearance:
a. Rear: 7′-0″ (2134) for coil removal. This dimension can be
reduced to 4′-0″ (1219) if conditions permit coil removal
from the top.
b. Left side: 4′-0″ (1219) for proper outdoor coil airflow.
c. Front: 4′-0″ (1219) for control box access.
d. Right side: 4′-0″ (1219) for proper operation of damper
and power exhaust (if so equipped).
e. Top: 6′-0″ (1829) to assure proper outdoor fan operation.
f. Local codes or jurisdiction may prevail.
6. With the exception of clearance for the outdoor coil and the
damper and power exhaust as stated in note no. 5, a removable fence or barricade requires no clearance.
7. Dimensions are from outside of corner post. Allow 0′-5/16″ (8)
on each side for top cover drip edge.
UNIT
542J
150
180
A
Lb
366
464
Kg
166
211
WEIGHT OF CORNER*
B
C
Lb
Kg
Lb
Kg
356 161 360 163
496 225 477 217
D
Lb
534
487
Kg
242
221
*Weights are for unit only and do not include options or crating.
542J150,180
104
CRRFCURB013A00
2′-0″
(610)
Horizontal Adapter
with High Static
Transition Duct
CURB
DESCRIPTION
HEIGHT
1′-2″
Standard Curb
CRRFCURB010A00
(305) 14″ High
Standard Curb for
2′-0″
CRRFCURB011A00
(610) Units Requiring
High Installation
Side Supply and
2′-0″
Curb for
CRRFCURB012A00
(610) Return
High Installation
50TFQ004-012
542J150,180
PKG NO. REF.
542J150,180
ALL
UNIT
Deg.
.28
A
in.
.45
Deg.
.28
B
in.
.43
DIMENSIONS* (degrees and inches)
NOTES:
1. Roof curb accessory is shipped disassembled.
2. Insulated panels: 1″ thick neoprene coated 11/2 lb density.
3. Dimensions in ( ) are in millimeters.
4.
Direction of airflow.
5. Roof curb: 16 ga. (VA03-56) stl.
6. A 90 degree elbow must be installed on the supply ductwork
below the unit discharge for units equipped with electric
heaters.
NOTE: To prevent the hazard of stagnant water build-up in the drain
pan of the indoor section, unit can only be pitched as shown.
ACCESSORY DIMENSIONS
105
ACCESSORY DIMENSIONS (cont)
NOTE: CRRFCURB013A00 is a fully factory pre-assembled horizontal
adapter which includes an insulated high static regain transition duct and
substantially improves fan static performance. Power exhaust and barometric relief accessories cannot be used with factory pre-assembled, high
static, horizontal adapter.
ACCESSORY
PACKAGE NO.
CRRFCURB013A00
CURB
HEIGHT
DESCRIPTION
2′-0″ (610)
Pre-Assembled
High Static
Horizontal Adapter
50TFQ004-012
542J150,180
Horizontal Adapter Installation — 542J150,180
K.O. — Knockout
Convenience Outlet — 542J150,180
106
ACCESSORY DIMENSIONS (cont)
Non-Fused Disconnect — 542J150,180
2'-1 5/8"
50TFQ004-012
542J150,180
2'-2 1/16"
1'-6 5/16"
Power Exhaust — 542J150,180
107
SELECTION PROCEDURE (WITH 542J180 EXAMPLE)
Enter the Electric Heating Capacities table at 230-3-60. The
34-kW heater satisfies the electric heater requirements.
IV DETERMINE FAN SPEED AND MOTOR HORSEPOWER
REQUIREMENTS AT DESIGN CONDITIONS.
Before entering Fan Performance table, calculate the total
static pressure required based on unit components. From
the given and the Accessory/FIOP Static Pressure table
on page 112, find:
I DETERMINE HEATING AND COOLING REQUIREMENTS AT DESIGN CONDITIONS.
Given:
Required Cooling Capacity (TC). . . . . . . . . . 164,000 Btuh
Sensible Heat Capacity (SHC) . . . . . . . . . . . 120,000 Btuh
Required Heating Capacity. . . . . . . . . . . . . . 170,000 Btuh
Outdoor-Air Temperature (Cooling) . . . . . . . . . . . . . . 95 F
Indoor Entering-Air Temperature
(Cooling) . . . . . . . . . . . . . . . . . . . . . 80 F Edb/67 F Ewb
Outdoor Coil Entering-Air Temperature
(Heating) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0° F
Indoor Winter Design Temperature. . . . . . . . . . . . . . . 70 F
Indoor-Air Quantity . . . . . . . . . . . . . . . . . . . . . . . 6000 Cfm
External Static Pressure (ESP . . . . . . . . . . . . . 1.30 in. wg
Electrical Characteristics (V-Ph-Hz) . . . . . . . . . . 230-3-60
EconoMi$er is specified.
Edb — Entering dry bulb
Ewb — Entering wet bulb
II SELECT UNIT BASED ON REQUIRED COOLING
CAPACITY.
Enter Cooling Capacity table on page 109 at outdoorentering temperature of 95 F, indoor air entering at
6000 cfm and 67 F ewb. The 542J180 will provide a total
capacity (TC) of 180,800 Btuh, a sensible heat capacity
(SHC) of 136,400 Btuh and a total unit kW of 15.88.
For indoor-air temperature other than 80 F edb, calculate
sensible heat capacity correction, as required, using the
formula found in Note 3 following the Cooling Capacities
table on page 109.
NOTE: Unit ratings are gross capacities and do not
include the effect of indoor-fan motor heat. To calculate net
capacities, see Step V.
III SELECT ELECTRIC HEAT.
Enter the Integrated Heating Capacities table on page 110
at 6000 cfm. At 70 F return indoor air and 0° F air entering
the outdoor coil, the integrated heating capacity is
58,500 Btuh with a unit input kW of 11.71 (interpolation
required).
The required heating capacity is 170,000 Btuh; therefore,
111,500 Btuh (170,000 – 58,500) additional electric heat is
necessary.
Determine the additional electric heat capacity in kW.
External static pressure
EconoMi$er static pressure
Electric heat static pressure
1.30 in. wg
0.07 in. wg
0.09 in. wg
Total static pressure
1.46 in. wg
Enter the Fan Performance table on page 111. At
6000 cfm and 1.46 in. wg external static pressure, the fan
speed is 1214 and the bhp is 3.95 (interpolation required).
The standard motor and alternate high static drive are
suitable.
V DETERMINE NET CAPACITIES.
Capacities are gross and do not include the effect of
indoor-fan motor (IFM) heat.
Determine net cooling capacity as follows:
Net capacity = Gross capacity – IFM heat
2545 Btuh
hp
= 180,800 – 3.95 bhp x
.85
= 180,800 – 11,827
= 168,973 Btuh
Net sensible capacity = 136,400 – 11,827
= 124,573 Btuh
Determine net heating capacity as follows:
Net capacity =
Gross capacity + IFM heat + Electric heat capacity
= 58,500 + (IFM kW x 3412) + (Elec. kW x 3412)
= 58,500 + 11,827 + (34 x 3412)
= 58,500 + 11,827 + 116,008
= 186,335 Btuh
50TFQ004-012
542J150,180
111,500 Btuh
= 32.6 kW
3412 Btuh/kW
108
PERFORMANCE DATA
COOLING CAPACITIES
542J150
Temp (F)
Air Ent
Outdoor
Coil
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
75
85
95
105
115
125
3750/0.04
72
167.0
79.6
10.00
160.0
77.6
11.10
155.0
76.1
12.20
147.0
73.6
13.20
140.0
71.4
14.20
131.0
68.1
15.20
67
154.0
100.0
9.77
148.0
98.9
10.80
141.0
96.3
11.80
133.0
93.3
12.70
126.0
90.3
13.70
118.0
87.6
14.70
4500/0.05
62
140.0
120.0
9.50
133.0
118.0
10.40
127.0
115.0
11.40
120.0
112.0
12.30
112.0
109.0
13.20
105.0
105.0
14.10
72
171.0
85.0
10.10
164.0
82.0
11.20
157.0
80.3
12.20
150.0
78.5
13.30
141.0
75.1
14.30
134.0
73.5
15.40
67
158.0
108.0
9.87
151.0
107.0
10.90
144.0
105.0
11.90
137.0
102.0
12.90
129.0
99.1
13.90
120.0
96.4
14.90
Air Entering Indoor Coil — Cfm/BF
5000/0.05
5625/0.06
Air Entering Indoor Coil — Ewb (F)
62
72
67
62
72
67
62
144.0 173.0 159.0 146.0 171.0 162.0 148.0
131.0
87.5 114.0 138.0
94.5 120.0 146.0
9.61
10.20
9.93
9.68
10.20 10.00
9.74
137.0 167.0 154.0 140.0 168.0 155.0 143.0
129.0
86.1 113.0 136.0
89.6 118.0 142.0
10.60 11.30 11.00 10.70 11.30 11.00 10.80
131.0 160.0 146.0 133.0 161.0 149.0 137.0
126.0
84.4 110.0 132.0
86.5 117.0 137.0
11.50 12.40 12.00 11.60 12.40 12.10 11.80
124.0 152.0 138.0 127.0 153.0 140.0 131.0
123.0
81.6 108.0 127.0
85.1 114.0 131.0
12.50 13.40 13.00 12.60 13.50 13.10 12.80
118.0 144.0 130.0 121.0 144.0 131.0 125.0
117.0
78.9 104.0 121.0
81.9 110.0 125.0
13.50 14.40 14.00 13.70 14.50 14.00 13.90
111.0 135.0 122.0 115.0 137.0 123.0 118.0
111.0
75.7 102.0 115.0
80.7 108.0 118.0
14.50 15.40 14.90 14.70 15.60 15.00 14.90
6250/0.07
72
173.0
97.7
10.20
166.0
95.3
11.30
163.0
91.7
12.50
154.0
88.6
13.50
146.0
87.0
14.60
136.0
83.4
15.60
67
161.0
127.0
10.00
157.0
125.0
11.10
149.0
121.0
12.10
141.0
120.0
13.10
133.0
117.0
14.10
124.0
113.0
15.10
62
151.0
150.0
9.80
146.0
146.0
10.80
140.0
140.0
11.90
134.0
134.0
12.90
128.0
128.0
14.00
121.0
121.0
15.00
542J180
Temp (F)
Air Ent
Outdoor
Coil
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
TC
SHC
kW
75
85
95
105
115
125
BF
Edb
Ewb
kW
SHC
TC
—
—
—
—
—
—
4500/0.06
72
210.0
100.6
13.58
202.0
98.0
14.86
192.4
94.8
16.16
182.0
91.0
17.36
171.2
87.4
18.54
159.4
83.6
19.64
67
192.0
125.2
13.12
183.0
121.8
14.32
173.2
118.0
15.52
163.0
114.2
16.64
152.4
110.2
17.72
141.2
105.8
18.74
5250/0.08
62
173.4
148.2
12.66
164.4
144.2
13.78
155.0
140.0
14.88
145.0
135.2
15.92
134.8
130.8
16.90
125.0
125.0
17.88
72
216.0
106.0
13.76
208.0
103.8
15.08
196.2
100.2
16.32
186.4
96.8
17.58
175.0
92.6
18.76
162.8
89.0
19.86
67
196.6
134.0
13.28
187.8
131.2
14.52
177.8
127.4
15.72
167.0
123.6
16.86
156.2
119.4
17.94
143.8
115.0
19.00
Air Entering Indoor Coil — Cfm/BF
6000/0.10
6750/0.10
Air Entering Indoor Coil — Ewb (F)
62
72
67
62
72
67
62
178.4 220.0 202.0 182.2 222.0 204.0 185.6
160.6 110.6 143.0 172.2 115.0 151.2 183.2
12.84 13.88 13.44 12.98 13.96 13.52 13.10
169.0 212.0 191.4 172.8 212.0 194.0 177.2
156.4 109.0 140.0 168.6 112.0 148.0 177.0
13.98 15.22 14.66 14.14 15.26 14.78 14.30
159.2 200.0 180.8 163.4 202.0 183.4 169.0
152.6 105.6 136.4 163.4 110.6 144.8 169.0
15.10 16.48 15.88 15.30 16.62 16.00 15.54
149.4 188.6 170.0 155.4 191.0 172.2 160.8
147.6 101.8 132.6 155.2 107.2 141.2 160.6
16.16 17.70 17.04 16.48 17.84 17.18 16.74
140.6 177.8 158.8 146.8 179.4 160.8 152.2
140.6
98.8
128.2 146.8 103.6 136.8 151.8
17.24 18.94 18.12 17.60 19.02 18.28 17.90
132.0 165.6 147.0 137.8 166.6 148.8 143.0
131.8
94.4 123.6 137.8
99.8 132.2 142.8
18.34 20.00 19.12 18.72 20.20 19.28 19.00
67
206.0
158.2
13.60
195.8
155.6
14.86
185.4
153.2
16.12
173.8
149.6
17.28
162.2
144.6
18.38
150.0
139.6
19.40
62
190.2
190.0
13.26
182.2
182.2
14.50
174.2
173.8
15.76
165.2
165.2
16.96
156.4
156.2
18.16
146.8
146.6
19.28
.05
.10
.20
.30
sensible capacity (Btuh)
1.10 x cfm
tlwb = Wet-bulb temperature corresponding to enthalpy of air leaving indoor coil (hlwb)
ENTERING AIR DRY-BULB TEMP (F)
78
77
76
75
under 75
82
83
84
85
over 85
Correction Factor
1.04 2.07 3.11 4.14 5.18
.98 1.96 2.94 3.92 4.90
Use formula
shown below.
.87 1.74 2.62 3.49 4.36
.76 1.53 2.29 3.05 3.82
79
81
Interpolation is permissible.
Correction Factor = 1.10 x (1 – BF) x (edb – 80).
total capacity (Btuh)
4.5 x cfm
Where: hewb = Enthalpy of air entering indoor coil
109
50TFQ004-012
542J150,180
BYPASS
FACTOR
(BF)
NOTES:
1. Direct interpolation is permissible. Do not extrapolate.
2. The following formulas may be used:
hlwb = hewb –
72
224.0
120.2
14.02
214.0
116.2
15.34
204.0
114.2
16.64
193.0
112.2
17.94
179.6
107.2
19.04
168.2
105.0
20.20
3. SHC is based on 80 F edb temperature of air entering indoor coil.
Below 80 F edb, subtract (corr factor x cfm) from SHC.
Above 80 F edb, add (corr factor x cfm) to SHC.
LEGEND
Bypass Factor
Entering Dry-Bulb
Entering Wet-Bulb
Compressor Motor Power Input
Gross Sensible Heat Capacity (1000 Btuh)
Gross Total Capacity (1000 Btuh)
tldb = tedb –
7500/0.12
PERFORMANCE DATA (cont)
INTEGRATED HEATING CAPACITIES
542J150
Return
Air
CFM
Temp
F (db)
55
3750
70
80
55
4500
70
80
55
5000
70
80
55
5625
70
80
55
6250
70
80
–10
Cap.
40.4
37.7
35.4
40.3
36.7
33.2
41.0
44.7
33.6
42.0
42.7
34.5
44.0
45.7
35.2
kW
7.81
8.19
8.41
7.98
8.38
8.64
8.11
8.45
8.76
8.27
8.66
8.94
8.43
8.79
9.04
0
Cap.
53.0
49.8
47.1
53.9
49.8
46.4
54.7
55.2
47.0
55.7
54.3
48.0
57.3
56.8
48.8
Temp Air Entering Outdoor Coil (F db at 75% RH)
17
20
30
40
10
kW
8.35
8.85
9.15
8.49
9.00
9.32
8.60
9.07
9.43
8.74
9.24
9.57
8.89
9.37
9.72
Cap.
65.6
61.9
58.8
67.5
62.9
59.6
68.4
65.7
60.4
69.4
65.9
61.5
70.6
67.9
62.4
kW
8.89
9.51
9.89
9.00
9.62
10.00
9.09
9.69
10.10
9.21
9.82
10.20
9.35
9.95
10.40
Cap.
74.5
70.3
67.0
77.0
72.0
68.7
78.0
73.1
69.8
79.0
74.1
70.9
79.9
75.6
71.9
kW
9.27
9.97
10.40
9.35
10.00
10.50
9.43
10.10
10.60
9.54
10.20
10.70
9.67
10.40
10.80
Cap.
78.5
74.1
70.8
80.9
75.9
72.6
81.9
76.9
73.6
83.0
77.9
74.7
83.9
79.4
75.7
kW
9.47
10.20
10.70
9.54
10.30
10.70
9.60
10.30
10.80
9.71
10.40
10.90
9.83
10.50
11.00
Cap.
91.9
86.8
83.4
93.8
88.6
85.2
95.0
89.7
86.3
96.2
90.9
87.4
97.3
91.9
88.4
kW
10.10
11.00
11.50
10.10
11.00
11.50
10.20
11.00
11.60
10.30
11.10
11.60
10.40
11.20
11.70
Cap.
120.0
114.0
109.0
123.0
116.0
112.0
124.0
118.0
113.0
124.0
120.0
115.0
124.0
120.0
117.0
kW
11.00
11.90
12.50
10.90
11.80
12.50
10.90
11.90
12.50
10.90
11.90
12.50
11.00
12.00
12.60
47
Cap.
140.0
133.0
128.0
144.0
136.0
131.0
144.0
138.0
132.0
144.0
140.0
134.0
143.0
140.0
136.0
kW
11.50
12.50
13.20
11.40
12.50
13.10
11.40
12.50
13.10
11.40
12.50
13.10
11.40
12.50
13.20
50
Cap.
147.0
139.0
134.0
149.0
142.0
137.0
149.0
143.0
139.0
148.0
145.0
140.0
147.0
145.0
142.0
kW
11.80
12.90
13.60
11.60
12.70
13.40
11.60
12.70
13.40
11.50
12.70
13.40
11.50
12.70
13.40
60
Cap.
168.0
161.0
156.0
167.0
163.0
159.0
165.0
163.0
160.0
164.0
163.0
160.0
160.0
161.0
159.0
kW
12.60
13.90
14.70
12.30
13.60
14.50
12.10
13.50
14.40
12.10
13.40
14.30
12.00
13.30
14.20
542J180
Return
Temp Air Entering Outdoor Coil (F db at 75% RH)
Air
–10
0
10
17
20
30
40
47
50
60
CFM Temp
Cap. kW
Cap. kW
Cap. kW
Cap. kW
Cap.
kW
Cap.
kW
Cap.
kW
Cap.
kW
Cap.
kW
F (db) Cap. kW
46.4
9.80 60.8 10.60 75.6 11.34 85.8 11.84 91.4 12.10 110.0 12.96 150.2 14.00 178.2 14.72 189.4 15.08 228.0 16.32
55
3750
39.6 10.04 54.4 10.96 69.8 11.86 80.4 12.48 85.8 12.78 103.4 13.82 141.6 15.02 168.4 15.84 179.0 16.26 214.0 17.64
70
35.0 10.20 50.2 11.20 65.8 12.20 76.8 12.90 81.8 13.24 99.2 14.38 136.0 15.70 161.8 16.60 172.0 17.04 206.0 18.52
80
4500
5000
5625
6250
—
—
—
—
—
47.8
40.6
36.0
10.02
10.26
10.44
62.0
55.8
51.6
10.78
11.16
11.40
77.0
71.2
67.4
11.48
12.00
12.36
87.6
82.0
78.4
11.96
12.60
13.04
93.2
87.4
83.6
12.20 112.0 12.98 153.2 13.92 182.2 14.58 193.4 14.90 230.0 15.94
12.90 105.4 13.86 144.6 14.98 172.0 15.74 182.8 16.12 220.0 17.36
13.36 101.0 14.44 138.8 15.68 165.2 16.52 175.8 16.94 212.0 18.30
48.6
41.8
37.2
10.26
10.50
10.66
63.0
56.8
52.8
10.98
11.36
11.62
78.4
72.6
68.6
11.64
12.18
12.54
89.2
83.6
79.8
12.10
12.76
13.20
94.8
89.0
85.0
12.32 113.6 13.06 155.2 13.94 184.4 14.56 195.8 14.86 234.0 15.80
13.04 107.2 13.96 147.0 15.00 174.8 15.74 185.8 16.08 222.0 17.24
13.50 103.0 14.56 141.4 15.72 168.2 16.52 179.0 16.90 216.0 18.18
49.2
42.6
38.2
10.50
10.72
10.88
63.8
58.0
54.0
11.18
11.58
11.84
79.4
73.6
69.8
11.82
12.38
12.74
90.2
84.6
81.0
12.26
12.92
13.38
96.0
90.2
86.4
12.46 115.2 13.18 158.0 14.02 187.8 14.60 198.4 14.84 234.0 15.64
13.20 108.6 14.08 149.2 15.08 177.6 15.78 188.4 16.10 224.0 17.14
13.68 104.4 14.68 143.4 15.80 170.8 16.58 181.6 16.94 218.0 18.14
50.0
43.4
39.0
10.72
10.96
11.12
64.6
58.8
54.8
11.40
11.80
12.06
80.2
74.6
70.8
12.00
12.58
12.94
91.0
85.6
82.0
12.42
13.12
13.56
97.0
91.2
87.6
12.64 116.6 13.30 159.8 14.14 190.0 14.70 200.0 14.92 234.0 15.58
13.36 110.0 14.22 151.0 15.20 179.6 15.88 190.2 16.16 226.0 17.12
13.86 105.6 14.84 145.0 15.92 172.6 16.66 183.6 17.00 220.0 18.16
LEGEND
Capacity (1000 Btuh)
Entering Air Dry-Bulb Temperature (F)
Leaving Air Dry-Bulb Temperature (F)
Compressor and Outdoor-Fan Power Input
Relative Humidity
NOTES:
1. Integrated heating capacity ratings shown are not adjusted for the effects of
the indoor-fan motor power and heat. A deduction has been made for defrosting the outdoor coils at temperatures below 40 F.
2. Direct interpolation is permissible. Do not extrapolate.
3. When using auxiliary and/or supplementary heating, the maximum allowable
leaving-air temperature is 140 F.
Total heating cap. (Btuh)
Ldb F = Edb F +
1.10 x airflow cfm
4. For supplementary glycol coil:
Fluid flow Gpm
fluid capacity (Btuh)
=
500 x fluid temperature drop (F)
50TFQ004-012
542J150,180
Cap.
Edb
Ldb
kW
RH
55
70
80
55
70
80
55
70
80
55
70
80
110
PERFORMANCE DATA (cont)
FAN PERFORMANCE — VERTICAL DISCHARGE UNITS
542J150
Airflow
(Cfm)
3750
4000
4250
4500
4750
5000
5250
5500
5750
6000
6250
Rpm
724
754
786
818
850
883
917
950
985
1020
1055
0.2
Watts
481
613
757
914
1084
1267
1464
1675
1901
2142
2398
Bhp
0.55
0.70
0.86
1.04
1.23
1.44
1.67
1.91
2.17
2.44
2.73
Rpm
838
865
893
922
951
980
1011
1041
1072
1103
1135
0.4
Watts
685
824
975
1138
1313
1501
1703
1918
2147
2391
2650
External Static Pressure (in. wg)
0.6
Rpm
Watts
Bhp
937
889
1.01
962
1034
1.18
987
1191
1.36
1013
1360
1.55
1040
1541
1.76
1068
1736
1.98
1096
1943
2.21
1124
2165
2.47
1153
2400
2.73
1183
2649
3.02
1213
2912
3.32
Rpm
1028
1050
1073
1097
1122
1147
1174
1201
1228
1256
1284
0.8
Watts
1097
1247
1408
1583
1770
1969
2183
2409
2650
2905
3175
Bhp
1.25
1.42
1.60
1.80
2.02
2.24
2.49
2.75
3.02
3.31
3.62
Rpm
1111
1131
1152
1174
1197
1221
1246
1272
1298
1324
1352
1.0
Watts
1309
1463
1629
1808
2000
2204
2423
2655
2901
3160
3435
Bhp
1.49
1.67
1.86
2.06
2.28
2.51
2.76
3.02
3.31
3.60
3.91
External Static Pressure (in. wg)
1.6
Bhp
Rpm
Watts
Bhp
1.99
1337
1972
2.25
2.17
1351
2136
2.43
2.37
1367
2313
2.64
2.58
1384
2503
2.85
2.81
1403
2707
3.08
3.05
1422
2923
3.33
3.31
1443
3154
3.59
3.59
1464
3398
3.87
3.88
1486
3657
4.17
4.18
—
—
—
—
—
—
—
Rpm
1405
1418
1433
1448
1465
1484
1503
1524
—
—
—
1.8
Watts
2199
2368
2548
2742
2948
3168
3403
3651
—
—
—
Bhp
2.51
2.70
2.90
3.12
3.36
3.61
3.88
4.16
—
—
—
Rpm
1471
1483
1496
1510
1526
1544
1562
—
—
—
—
2.0
Watts
2431
2603
2787
2983
3194
3418
3655
—
—
—
—
Bhp
2.77
2.97
3.18
3.40
3.64
3.89
4.16
—
—
—
—
Bhp
0.78
0.94
1.11
1.30
1.50
1.71
1.94
2.19
2.45
2.72
3.02
542J150 (cont)
Airflow
(Cfm)
Rpm
1190
1208
1227
1247
1269
1291
1315
1339
1364
1389
1415
3750
4000
4250
4500
4750
5000
5250
5500
5750
6000
6250
1.2
Watts
1526
1684
1853
2036
2232
2441
2664
2900
3151
3416
3695
Bhp
1.74
1.92
2.11
2.32
2.54
2.78
3.03
3.30
3.59
3.89
4.21
Rpm
1265
1281
1299
1317
1337
1358
1380
1403
1426
1450
—
1.4
Watts
1746
1908
2082
2268
2468
2680
2907
3148
3403
3672
—
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
NOTES:
1. Standard drive range is 891 to 1179 rpm. Alternate drive range is 1227 to
1559. Other rpms may require a field-supplied drive.
2. Maximum continuous bhp is 4.25 and maximum continuous watts are 3775.
Do not adjust motor rpm such that motor maximum bhp and/or watts is
exceeded at the maximum operating cfm.
Refer to this page for general Fan Performance notes.
542J180
Airflow
(Cfm)
4500
4800
5100
5400
5700
6000
6300
6600
6900
7200
7500
Rpm
584
609
634
660
687
712
736
763
788
813
841
0.2
Watts
717
839
971
1118
1284
1458
1644
1856
2078
2316
2584
Bhp
0.8
0.9
1.1
1.3
1.4
1.6
1.8
2.1
2.3
2.6
2.9
Rpm
695
717
738
760
783
805
826
851
873
896
921
0.4
Watts
952
1085
1229
1389
1566
1752
1952
2176
2410
2662
2943
External Static Pressure (in. wg)
0.6
Rpm
Watts
Bhp
798
1205
1.3
815
1346
1.5
833
1500
1.7
852
1669
1.9
873
1858
2.1
892
2055
2.3
911
2265
2.5
933
2502
2.8
954
2747
3.1
975
3011
3.4
998
3304
3.7
Rpm
893
907
921
937
956
973
990
1010
1029
1048
1070
0.8
Watts
1483
1630
1791
1968
2165
2371
2591
2837
3093
3367
3672
Bhp
1.7
1.8
2.0
2.2
2.4
2.7
2.9
3.2
3.5
3.8
4.1
Rpm
984
994
1006
1019
1034
1049
1064
1082
1099
1117
1137
1.0
Watts
1786
1938
2104
2286
2490
2703
2930
3186
3451
3734
4049
Bhp
2.0
2.2
2.4
2.6
2.8
3.0
3.3
3.6
3.9
4.2
4.5
External Static Pressure (in. wg)
1.6
Bhp
Rpm
Watts
Bhp
2.8
1229
2819
3.2
2.9
1233
2990
3.3
3.1
1238
3170
3.5
3.3
1245
3366
3.8
3.6
1253
3584
4.0
3.8
1262
3810
4.3
4.1
1271
4052
4.5
4.4
1283
4325
4.8
4.7
1295
4608
5.2
5.0
—
—
—
5.4
—
—
—
Rpm
1302
1306
—
—
—
—
—
—
—
—
—
1.8
Watts
3194
3374
—
—
—
—
—
—
—
—
—
Bhp
3.6
3.8
—
—
—
—
—
—
—
—
—
Rpm
—
—
—
—
—
—
—
—
—
—
—
2.0
Watts
—
—
—
—
—
—
—
—
—
—
—
Bhp
—
—
—
—
—
—
—
—
—
—
—
Bhp
1.1
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
542J180 (cont)
Airflow
(Cfm)
Bhp
2.4
2.5
2.7
2.9
3.2
3.4
3.7
4.0
4.3
4.6
5.0
Rpm
1151
1157
1164
1172
1183
1193
1204
1218
1232
1246
1264
1.4
Watts
2458
2620
2795
2986
3200
3422
3660
3928
4207
4505
4837
LEGEND
Bhp
— Brake Horsepower Input to Fan
Watts — Input Watts to Motor
NOTES:
1. Standard drive range is 817 to 1038 rpm. Alternate drive range is 1082 to
1303. Other rpms may require a field-supplied drive.
2. Maximum continuous bhp is 5.90 and maximum continuous watts are 5180.
Do not adjust motor rpm such that motor maximum bhp and/or watts is
exceeded at the maximum operating cfm.
Refer to this page for general Fan Performance notes.
GENERAL NOTES FOR FAN PERFORMANCE TABLES
2. Values include losses for filters, unit casing, and wet coils. See page 112 for
1. Extensive motor and electrical testing on these units ensures that the full
accessory/FIOP static pressure information.
range of the motor can be utilized with confidence. Using your fan motors up
3. Use of a field-supplied motor may affect wire sizing. Contact your Bryant
to the wattage ratings shown will not result in nuisance tripping or premature
representative for details.
motor failure. Unit warranty will not be affected. For additional information
4. Interpolation is permissible. Do not extrapolate.
on motor performance, refer to Indoor-Fan Motor Performance table on
page 114.
111
50TFQ004-012
542J150,180
4500
4800
5100
5400
5700
6000
6300
6600
6900
7200
7500
Rpm
1070
1078
1086
1097
1110
1122
1135
1151
1167
1183
1202
1.2
Watts
2113
2269
2439
2626
2835
3053
3286
3549
3821
4113
4437
PERFORMANCE DATA (cont)
ACCESSORY/FIOP STATIC PRESSURE* (in. wg) — 542J150,180
ACCESSORY/FIOP
UNIT SIZE
UNIT VOLTAGE
kW
208/230-3-60
14-34
42,56
15,32
55
26,34
42,56
150
460-3-60
Electric Heaters
208/230-3-60
180
EconoMi$er
Glycol Coil
All
All
3750
0.05
0.06
0.05
0.06
4500
0.05
0.06
0.05
0.06
5000
0.07
0.08
0.07
0.08
*
*
*
460-3-60
32,55
*
*
*
All
All
—
—
0.03
0.16
0.03
0.18
0.05
0.25
LEGEND
FIOP — Factory-Installed Option
5600
0.08
0.10
0.08
0.10
0.08
0.10
0.08
0.10
0.06
0.31
CFM
6000
0.09
0.12
0.09
0.12
0.09
0.12
0.09
0.12
0.07
0.35
6250
0.09
0.13
0.09
0.13
0.09
0.13
0.09
0.13
0.07
0.37
7200
0.11
0.16
0.11
0.15
0.11
0.16
0.11
0.15
0.09
0.44
7500
0.12
0.17
0.12
0.15
0.12
0.17
0.12
0.17
0.10
0.46
NOTES:
1. Heaters are rated at 208/240 v and 480 v.
2. The static pressure must be added to external static pressure. The
sum and the indoor-air section entering-air cfm should then be
used in conjunction with the Fan Performance table to determine
blower rpm, bhp, and watts.
*Units with electric heat are not designed to operate at these ranges.
FAN RPM AT MOTOR PULLEY SETTINGS* — 542J150,180
MOTOR PULLEY TURNS OPEN
21/2
3
31 / 2
4
UNIT
542J
0
1/ 2
1
11 / 2
2
150†
150**
180†
180**
—
—
—
—
—
—
—
—
1179
1559
1038
1303
1150
1522
1023
1288
1121
1488
1001
1266
1093
1455
979
1244
1064
1422
956
1222
1035
1389
934
1199
1006
1356
912
1177
50TFQ004-012
542J150,180
*Approximate fan rpm shown.
†Standard motor with standard drive.
**Standard motor with alternate drive.
Fan Performance Using Accessory Power Exhaust
112
41/2
5
51 / 2
6
978
1323
890
1155
949
1289
868
1133
920
1256
846
1111
891
1227
817
1082
PERFORMANCE DATA (cont)
NOTE: The CRRFCURB013A00 horizontal supply/return adapter
accessory improves 542J fan performance by increasing external
static pressure by amount shown above.
NOTE: The CRRFCURB013A00 high static regain adapter
accessory may be used to provide horizontal supply/return.
Horizontal Supply/Return Fan Performance
with CRRFCURB013A00 High Static Regain Adapter
ELECTRIC HEATING CAPACITIES — 542J150,180
UNIT 542J
208
14
26
42
26
42
150
180
HEATER kW
Unit Voltages
230
19
34
56
34
56
460
15
32
55
32
55
HEATER
STAGES
% HEAT
PER STAGE
MAXIMUM
STAGES*
1
2
2
2
2
100
50/50
33/67
50/50
33/67
1
2
3
2
3
*Maximum number of stages using accessory outdoor-air thermostats.
NOTE: Heaters are rated at 208 v, 240 v and 480 v. See multiplication
factors table on page 54.
GLYCOL COIL DATA*
CFM
5000
% Glycol
4400
EDB
EGT
200
180
160
200
180
160
200
180
160
55
70
80
—
—
—
—
—
25
Gpm
33
27
21
29
23
17
26
21
15
Ldb
120
108
97
127
116
104
132
121
109
Cap.
293
237
181
257
201
146
233
177
123
50
Gpm
33
27
21
29
23
17
27
20
14
Ldb
116
105
93
124
112
100
129
117
106
Cap.
333
274
215
294
235
176
268
209
150
25
Gpm
35
29
23
31
25
19
28
22
16
Ldb
117
106
95
124
114
103
130
119
108
50
Gpm
36
29
22
31
25
18
28
22
15
Cap.
315
254
194
276
216
156
250
190
131
Ldb
113
102
91
121
110
99
126
115
104
Cap.
375
308
241
331
264
197
301
234
168
25
Gpm
40
33
25
35
28
21
32
25
18
Ldb
111
101
91
119
109
99
125
115
105
Cap.
353
285
217
310
241
174
280
212
146
50
Gpm
40
33
25
35
28
20
32
24
17
*This accessory glycol coil is intended for use with a MINIMUM of 25%
glycol solution. It IS NOT intended for use solely with water due to
freeze-up conditions and the resulting water damage to the conditioned space.
NOTE: Fluid ∆t = 20 F.
LEGEND
Btuh x 1000
Entering Dry-Bulb Temperature (F)
Entering Glycol Temperature (F)
Gallons per Minute
Leaving Dry-Bulb Temperature (F)
GLYCOL COIL RATINGS
ENTERING
FLUID
TEMP
(F)
200
180
160
Ldb
108
98
87
116
106
96
122
112
102
CFM
4000
5000
6000
8000
GPM
∆P
GPM
∆P
GPM
∆P
GPM
27
22
16
1.2
0.9
0.6
31
25
19
1.5
1.1
0.7
35
27
20
1.8
1.3
0.8
41
32
24
NOTE: ∆P is the fluid pressure in ft of head.
113
∆P
2.4
1.6
1.0
50TFQ004-012
542J150,180
Cap.
EDB
EGT
Gpm
Ldb
Cap.
310
255
200
274
218
164
249
194
140
6200
PERFORMANCE DATA (cont)
INDOOR-FAN MOTOR PERFORMANCE — 542J150,180
UNIT
542J
UNIT
VOLTAGE
MAXIMUM
ACCEPTABLE
OPERATING
WATTS
4.25
3775
5.90
5180
208/230
460
208/230
460
150
180
Bhp —
MAXIMUM
ACCEPTABLE
CONTINUOUS
BHP*
MAXIMUM
AMP DRAW
MOTOR
EFFICIENCY
10.5
4.9
15.8
7.9
85.8
85.8
87.5
87.5
*Extensive motor and electrical testing on these units ensures that the full horsepower range of the motors can be utilized with confidence. Using your fan motors
up to the horsepower ratings shown in this table will not result in nuisance tripping or premature motor failure. Unit warranty will not be affected.
LEGEND
Brake Horsepower
ELECTRICAL DATA
UNIT
542J
VOLTAGE
(3 PH, 60 Hz)
208/230
OUTDOOR
INDOOR FAN
FAN
MOTOR
MOTOR
Min Max RLA LRA RLA LRA Qty FLA
FLA
(ea) Hp
VOLTAGE
RANGE
187
253
COMPRESSOR
No. 1
39.7
228
No. 2
—
—
3
1.7
POWER
EXHAUST
FLA LRA
—
—
4.6
18.8
—
—
2.3
6.0
—
—
4.6
18.8
—
—
2.3
6.0
3.7 10.5/10.5
150
460
208/230
414
187
508
253
19.9
28.2
114
160
—
28.2
—
160
3
3
0.8
1.7
3.7
5
4.8
15.8/158
180
460
50TFQ004-012
542J150,180
FLA
HACR
LRA
MCA
MOCP
NEC
RLA
—
—
—
—
—
—
—
414
508
14.1
80
14.1
80
3
0.8
5
7.9
ELECTRIC HEAT*
POWER SUPPLY
DISCONNECT
SIZING
FLA
kW
MCA
MOCP†
RLA
—/—
39/ 45
72/ 92
117/135
—/—
39/ 45
72/ 82
117/135
—
18
39
66
—
18
39
66
—/—
72/ 82
117/135
—/—
72/ 82
117/135
—
39
66
—
39
66
—/—
14/19
26/34
42/56
—/—
14/19
26/34
42/56
—
15
32
55
—
15
32
55
—/—
26/34
42/56
—/—
26/34
42/56
—
32
55
—
32
55
65/ 65
114/122
155/168
211/200
70/ 70
119/126
159/173
216/205
32
54
81
98
34
57
83
100
84/ 84
174/187
231/219
89/ 89
179/191
235/224
42
91
108
44
93
110
100/100
125/150
175/175
225/225
100/100
125/150
175/175
225/225
50
60
90
110
50
70
90
110
110/110
175/200
250/225
110/110
200/200
250/225
50
100
110
50
100
125
64/ 64
64/ 64
94/107
147/167
69/ 69
69/ 69
100/112
152/173
31
31
50
82
34
34
53
84
89/ 89
101/112
153/173
94/ 94
106/118
158/179
44
54
85
47
57
88
LRA
387/387
406/406
189
195
499/485
518/504
238
244
NOTES:
1. In compliance with NEC requirements for multimotor and combination load
equipment (refer to NEC Articles 430 and 440), the overcurrent protective
device for the unit shall be fuse or HACR breaker. The Canadian units may be
fuse or circuit breaker.
2. MCA calculation for units with electric heaters over 50 kW
= (1.25 x IFM amps) + (1.00 x heater FLA).
LEGEND
Full Load Amps
Heating, Air Conditioning and Refrigeration
Locked Rotor Amps
Minimum Circuit Amps
Maximum Overcurrent Protection
National Electrical Code
Rated Load Amps
*Heater capacity (kW) is based on heater voltage of 208 v, 240 v and 480 v. If
power distribution voltage to unit varies from rated heater voltage, heater kW will
vary accordingly.
†Fuse or HACR circuit breaker. This is the maximum size permissible; smaller
fuse size may be used where conditions permit.
114
TYPICAL WIRING SCHEMATIC
50TFQ004-012
542J150,180
542J180, 460-3-60 Shown
115
TYPICAL WIRING SCHEMATIC (cont)
LEGEND AND NOTES FOR TYPICAL WIRING SCHEMATIC
50TFQ004-012
542J150,180
AHA
BKR W/AT
C
CAP
CB
CC
CH
CLO
COMP
CT
CTD
DAT
DB
DFT
DM
DR
DU
EC
EQUIP
FL
FPT
GND
HC
HPS
HR
HTR
IFC
IFCB
IFM
IP
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Adjustable Heat Anticipator
Breaks with Amp Turns
Contactor, Compressor
Capacitor
Circuit Breaker
Cooling Compensator
Crankcase Heater
Compressor Lockout
Compressor Motor
Current Transformer
Compressor Time Delay
Discharge Air Thermistor
Defrost Board
Defrost Thermostat
Damper Motor
Defrost Relay
Dummy Terminal
Enthalpy Control
Equipment
Fuse Link
Freeze Protection Thermostat
Ground
Heater Contactor
High-Pressure Switch
Heat Relay
Heater
Indoor-Fan Contactor
Indoor-Fan Circuit Breaker
Indoor Fan Motor
Internal Protector
L
LOR
LPS
LS
OAT
OFC
OFM
OP
PL
QT
RVR
RVS
TB
TC
TH
TRAN
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Light
Lock Out Relay
Low-Pressure Switch
Limit Switch
Outdoor-Air Thermostat
Outdoor-Fan Contactor
Outdoor Fan Motor
Overcurrent Protector
Plug Assembly
Quadruple Terminal
Reversing Valve Relay
Reversing Valve Solenoid
Terminal Block
Thermostat Cooling
Thermostat Heating
Transformer
Terminal (Marked)
Terminal (Unmarked)
Terminal Block
Splice
Factory Wiring
Field Wiring
Option/Accessory Wiring
To Indicate Common Potential Only:
Not To Represent Wiring
NOTES:
1. Compressor and/or fan motor(s) thermally protected. Three-phase motors are protected
against primary single phasing conditions.
2. If any of the original wire furnished must be replaced, it must be replaced with type 90° C
wire or its equivalent.
3. CB1,2 must trip amps are equal to or less than 156% FLA, IFCB 140%.
4. The CLO locks out the compressor to prevent short cycling on compressor overload and
safety devices. Before replacing CLO, check these devices.
5. Jumpers are omitted when unit is equipped with economizer.
6. Number(s) indicates the line location of used contacts. A bracket over (2) numbers signifies
a single-pole, double-throw contact. An underlined number signifies a normally-closed
contact. Plain (no line) number signifies a normally-open contact.
7. Remove jumper between terminals RC and RH.
116
TYPICAL WIRING SCHEMATIC (cont)
6T3 4T2 2T1 LOAD
5L3 3L2 1L1 LINE
NOTES:
1. If the non-fused disconnect Service Option is ordered for size 150,180 units, the
Non-Fused Disconnect will be factory-installed.
2. The Disconnect takes the place of TB-1 as shown on the unit wiring diagram label
and the component arrangement label.
Optional Non-Fused Disconnect — 542J150,180
50TFQ004-012
542J150,180
117
50TFQ004-012
542J150,180
GUIDE SPECIFICATIONS — 542J150,180 UNITS
4. Holes shall be provided in the base rails for rigging
shackles to facilitate maneuvering and overhead
rigging.
5. Unit shall have a factory-installed, sloped condensate drain pan made of a non-corrosive material, providing a minimum 3/4-in. 14 NPT connection with both
vertical and horizontal drains, and shall comply with
ASHRAE Standard 62.
6. Unit shall have a factory-installed filter access panel
to provide filter access with tool-less removal.
7. Unit shall have standard thru-the-bottom power connection capability (accessory kit is required).
C. Fans:
1. Indoor Fan:
a. Fan shall be belt driven with an adjustable-pitch
motor pulley. The standard fan drive shall have a
factory-installed low-medium static pressure fan
drive. The alternate fan drive option shall have a
factory-installed high static pressure fan drive.
b. Fan wheel shall be double-inlet type with forwardcurved blades.
c. Bearings shall be sealed, permanently lubricated
ball-bearing type for longer life and lower
maintenance.
d. Bearings shall be pillow block type (180 only).
2. Indoor fan shall be made from steel with a corrosionresistant finish and shall be dynamically balanced.
3. Outdoor fan shall be of the direct-driven (with totally
enclosed motors) propeller type and shall discharge
air vertically.
4. Outdoor fan shall have aluminum blades riveted to
corrosion-resistant steel spiders and shall be dynamically balanced.
D. Compressor(s):
1. Reciprocating semi-hermetic compressors with
factory-installed crankcase heaters.
2. Factory mounted on rubber grommets and internally
spring mounted for vibration isolation.
3. On independent circuits (180).
4. The size 150 unit semi-hermetic compressor shall be
equipped with an electric unloader for capacity
control.
E. Coils:
1. Standard indoor and outdoor coils shall have copper
or aluminum plate fins mechanically bonded to
seamless internally grooved copper tubes with all
joints brazed.
2. Coils:
a. Copper-fin coils shall be constructed of copper
fins mechanically bonded to copper tubes and
copper tube sheets. Galvanized steel tube sheets
shall not be acceptable. A polymer strip shall prevent coil assembly from contacting the sheet
metal coil pan to minimize potential for galvanic
corrosion between coil and pan. All copper construction shall provide protection in moderate
coastal environments.
PACKAGED ROOFTOP AIR-TO-AIR HEAT PUMP — CONSTANT VOLUME APPLICATION
HVAC GUIDE SPECIFICATIONS
SIZE RANGE: 12 to 15 TONS, NOMINAL (COOLING)
136,000 to 172,000 BTUH, NOMINAL
(INPUT HEATING)
BRYANT MODEL NUMBER: 542J
PART 1 — GENERAL
1.01 SYSTEM DESCRIPTION
Outdoor rooftop mounted, electrically controlled air-to-air
heat pump unit utilizing reciprocating, semi-hermetic compressor(s) for cooling duty and electric resistance coils for
heating duty. Unit shall discharge supply air vertically or
horizontally (with horizontal supply/return adapter assembly or roof curb) as shown on contract drawings.
1.02 QUALITY ASSURANCE
A. Unit shall be rated in accordance with ARI Standard 340.
Designed in accordance with UL Standard 1995.
B. Unit shall be designed to conform to ASHRAE 15, latest
revision.
C. Unit shall be UL-tested and certified in accordance
with ANSI Z21.47 Standards and UL-listed and certified
under Canadian standards as a total package for safety
requirements.
D. Roof curb shall be designed to conform to NRCA
Standards.
E. Insulation and adhesive shall meet NFPA 90A requirements for flame spread and smoke generation.
F. Unit casing shall be capable of withstanding 500-hour salt
spray exposure per ASTM B117 (scribed specimen).
G. Unit shall be designed in accordance with ISO 9001, and
shall be manufactured in a facility registered to ISO 9002/
BS5750, Part 2.
H. Each unit shall be subjected to a completely automated
run testing on the assembly line. Units contain a factorysupplied printout indicating tested pressures, amperages,
data, and inspectors; providing certification of the unit
status at the time of manufacture.
1.03 DELIVERY, STORAGE, AND HANDLING
Unit shall be stored and handled per manufacturer’s
recommendations.
PART 2 — PRODUCTS
2.01 EQUIPMENT (STANDARD)
A. General:
Factory assembled, single-piece heat pump unit. Contained within the unit enclosure shall be all factory wiring,
piping, controls, refrigerant charge (R-22), and special
features required prior to field start-up.
B. Unit Cabinet:
1. Unit cabinet shall be constructed of galvanized steel,
and shall be bonderized and coated with a prepainted baked enamel finish on all externally
exposed surfaces.
2. Indoor fan compartment interior cabinet surfaces
shall be insulated with a minimum 1/2-in. thick, 1 lb.
density, flexible fiberglass insulation, neoprene
coated on the air side.
3. Cabinet panels shall be easily removable for
servicing.
118
GUIDE SPECIFICATIONS — 542J150,180 UNITS (cont)
H. Filter Section:
1. Standard filter section shall consist of factoryinstalled, low velocity, throwaway 2-in. thick fiberglass
filters of commercially available sizes.
2. Filter face velocity shall not exceed 320 fpm at nominal airflows.
3. Filter section should use only one size filter.
4. Filters shall be accessible through an access panel
with “no-tool” removal.
I. Controls and Safeties:
1. Unit Controls:
Unit shall be complete with self-contained lowvoltage control circuit protected by a resettable
circuit breaker on the 24-v transformer side.
2. Safeties:
a. Unit shall incorporate a solid-state compressor
protector which provides anti-cycle reset capability at the space thermostat, should any of the following standard safety devices trip and shut off
compressor.
1) Compressor overtemperature, overcurrent.
2) Loss-of-charge/low-pressure switch.
3) Freeze-protection thermostat, evaporator coil.
4) High-pressure switch.
5) Automatic reset motor thermal overload
protector.
The lockout protection shall be easily disconnected at the control board, if necessary.
b. Heating section shall be provided with the following minimum protections:
1) High-temperature limit switches.
2) Overcurrent protection.
c. Unit shall incorporate an outdoor coil defrost system to prevent excessive frost accumulation during heating duty, and shall be controlled as
follows:
1) Defrost shall be initiated on the basis of time
and coil temperature.
2) A 30/50/90-minute timer shall activate defrost
cycle only if the coil temperature is low enough
to indicate a heavy frost condition.
3) Defrost cycle shall terminate when defrost
thermostats are satisfied and shall have a positive termination time of 10 minutes.
J. Operating Characteristics:
1. Unit shall be capable of starting and running at 125 F
ambient outdoor temperature, meeting maximum
load criteria of ARI Standard 210/240 or 360 at
+ 10% voltage.
2. Compressor with standard controls shall be capable
of operation down to 40 F (in cooling mode) ambient
outdoor temperature.
3. Compressor shall be capable of operation down to –20 F
(in heating mode) ambient outdoor temperature.
4. Unit shall be capable of simultaneous heating duty
and defrost cycle operation when using accessory
electric heaters.
119
50TFQ004-012
542J150,180
b. E-Coated aluminum-fin coils shall have a flexible
epoxy polymer coating uniformly applied to all coil
surface areas without material bridging between
fins. Coating process shall ensure complete coil
encapsulation. Color shall be high gloss black
with gloss — 60 deg of 65 to 90% per ASTM
D523-89. Uniform dry film thickness from 0.8 to
1.2 mil on all surface areas including fin edges.
Superior hardness characteristics of 2H per
ASTM D3363-92A and cross-hatch adhesion of
4B-5B per ASTM D3359-93. Impact resistance
shall be up to 160 in.-lb (ASTM D2794-93).
Humidity and water immersion resistance shall be
up to minimum 1000 and 250 hours respectively
(ASTM D2247-92 and ASTM D870-92). Corrosion durability shall be confirmed through testing
to be no less than 1000 hours salt spray per
ASTM B117-90. Coil construction shall be aluminum fins mechanically bonded to copper tubes.
c. E-Coated copper-fin coils shall have a flexible
epoxy polymer coating uniformly applied to all coil
surface areas without material bridging between
fins. Coating process shall ensure complete coil
encapsulation. Color shall be high gloss black
with gloss — 60 deg of 65 to 90% per ASTM
D523-89. Uniform dry film thickness from 0.8 to
1.2 mil on all surface areas including fin edges.
Superior hardness characteristics of 2H per
ASTM D3363-92A and cross-hatch adhesion of
4B-5B per ASTM D3359-93. Impact resistance
shall be up to 160 in.-lb (ASTM D2794-93).
Humidity and water immersion resistance shall be
up to minimum 1000 and 250 hours respectively
(ASTM D2247-92 and ASTM D870-92). Corrosion durability shall be confirmed through testing
to be no less than 1000 hours salt spray per
ASTM B117-90. Coil construction shall be copper
fins mechanically bonded to copper tubes with
copper tube sheets. Galvanized steel tube sheets
shall not be acceptable. A polymer strip shall prevent coil assembly from contacting sheet metal
coil pan to maintain coating integrity and minimize
corrosion potential between coil and pan.
d. Optional pre-coated aluminum-fin coils shall have
a durable epoxy-phenolic coating to provide protection in mildly corrosive coastal environments.
Coating shall be applied to the aluminum fin stock
prior to the fin stamping process to create an inert
barrier between the aluminum fin and copper
tube. Epoxy-phenolic barrier shall minimize galvanic action between dissimilar metals.
F. Heating Section:
1. May be equipped with field-installed electric resistance heater(s) of the characteristics shown in the
equipment schedule.
2. Heater elements shall be open wire, adequately supported and insulated with ceramic bushings.
G. Refrigerant Components:
Refrigerant circuit components shall include:
1. Fixed orifice metering system.
2. Refrigerant filter drier.
3. Reversing valve.
4. Service gage connections on suction, discharge, and
liquid lines.
50TFQ004-012
542J150,180
GUIDE SPECIFICATIONS — 542J150,180 UNITS (cont)
K. Electrical Requirements:
All unit power wiring shall enter unit cabinet at a single
factory-predrilled location.
L. Motors:
1. Compressor motors shall be cooled by refrigerant
gas passing through motor windings and shall have
line break thermal and current overload protection.
2. Indoor-fan motor shall have permanently lubricated
bearings and inherent automatic-reset thermal overload protection.
3. Totally enclosed outdoor-fan motor shall have permanently lubricated bearings, and inherent automaticreset thermal overload protection.
M. Special Features:
Certain features are not applicable when the features
designated * are specified. For assistance in amending
the specifications, contact your local Bryant Sales Office.
1. Roof Curbs (Horizontal and Vertical):
a. Formed galvanized steel with wood nailer strip
and shall be capable of supporting entire unit
weight.
b. Permits installation and securing of ductwork to
curb prior to mounting unit on the curb.
2. Horizontal Adapter Roof Curb:
Includes factory-assembled adapter and duct which
substantially improves indoor fan static motor performance (static regain).
NOTE: Power exhaust and barometric relief must be
mounted in the return ductwork when used in conjunction with this accessory.
*3. Integrated EconoMi$er:
a. Integrated integral modulating type capable of
simultaneous EconoMi$er and compressor
operation.
b. Includes all hardware and controls to provide
cooling with outdoor air.
c. Equipped with low-leakage dampers, not
to exceed 2% leakage at 1 in. wg pressure
differential.
d. Capable of introducing up to 100% outdoor air.
e. EconoMi$er shall be equipped with a barometric
relief damper.
f. Designed to close damper(s) during loss-ofpower situations with spring return built into
motor.
g. Dry bulb outdoor-air temperature sensor shall be
provided as standard. Enthalpy, differential temperature, and differential enthalpy control shall be
provided as an option.
h. EconoMi$er is a gear-driven parallel blade
design.
i. EconoMi$er shall provide control of internal building pressure through its accessory two-stage
power exhaust function.
j. EconoMi$er shall be capable of control from a 4
to 20 mA signal.
4. Barometric Relief Damper:
a. Package shall include damper, seals, hardware,
and hoods to relieve excess internal pressure.
b. Damper shall close due to gravity upon unit
shutdown.
5. Manual Outdoor-Air Damper:
Manual damper package shall consist of damper,
birdscreen, and rainhood which can be preset
to admit up to 50% outdoor air for year round
ventilation.
*6. 25% Two-Position Damper:
a. Two-position damper package shall include single
blade damper and motor. Admits up to 25% outdoor air.
b. Damper shall close upon indoor fan shutoff.
*7. Head Pressure Control Package:
Consists of solid-state control and condenser-coil
temperature sensor to maintain condensing temperature between 90 F and 110 F at outdoor ambient
temperatures down to –20 F by condenser-fan speed
modulation or condenser-fan cycling and wind
baffles.
*8. Electric Resistance Heaters:
a. Open wire nichrome elements with all necessary
safety operating controls.
b. UL listed and indicated on basic unit information
plate.
c. Available in multiples to match heating requirements.
d. Single point kits available for each heater when
required.
*9. Electronic Programmable Thermostat:
Capable of using deluxe full-featured electronic thermostat. Shall use built-in compressor cycle delay
control for both heating and cooling duty.
*10. Thermostat and Subbase:
Provides staged cooling and heating automatic (or
manual) changeover, fan control, and indicator light.
*11. Unit-Mounted, Non-Fused Disconnect Switch:
Shall be factory-installed, internally mounted. NEC
and UL approved non-fused switch shall provide unit
power shutoff. Shall be accessible from outside the
unit and shall provide power off lockout capability.
*12. Convenience Outlet:
Shall be factory-installed and internally mounted with
easily accessible 115-v female receptacle. Shall
include 15 amp GFI receptacle with independent
fuse protection. Voltage required to operate convenience outlet shall be provided by a factory-installed
step-down transformer. Shall be accessible from outside the unit.
*13. Compressor Cycle Delay:
Unit shall be prevented from restarting for minimum
of 5 min. after shutdown.
*14. Fan/Filter Status Switch:
Provides status of indoor (evaporator) fan (ON/OFF)
or filter (CLEAN/DIRTY). Status shall be displayed
over communication bus when used with direct digital
controls or with an indicator light at the thermostat.
120
GUIDE SPECIFICATIONS — 542J150,180 UNITS (cont)
15. Power Exhaust Accessory:
Power exhaust shall be used to provide system
exhaust of up to 100% of return air. The power exhaust
is a field-installed accessory (vertical applications).
16. Outdoor Air Enthalpy Sensor:
The outdoor air enthalpy sensor shall be used with
the EconoMi$er device to provide single enthalpy
control. When used in conjunction with a return air
enthalpy sensor, the EconoMi$er device will provide
differential enthalpy control. The sensor allows the
EconoMi$er controller to determine if outside air is
suitable for free cooling.
17. Return Air Enthalpy Sensor:
The return air enthalpy sensor shall be used with the
EconoMi$er device. When used in conjunction with
an outdoor air enthalpy sensor, the EconoMi$er
device will provide differential enthalpy control.
18. Return Air Temperature Sensor:
The return air temperature sensor shall be used with
the EconoMi$er device. When used in conjunction
with the standard outdoor air temperature sensor,
the EconoMi$er device will provide differential temperature control.
19. Ultra-Violet Germicidal Lamps:
Ultra-violet germicidal lamps are designed to eliminate odor causing mold and fungus that may develop
in the wet area of the evaporator section of the unit.
The high output, low temperature germicidal lamps
are field installed in the evaporator section of the
unit, aimed at the indoor coil and condensate pan.
The short wavelength ultra-violet light inhibits and
kills mold, fungus and microbial growth. The lamps
20.
21.
22.
23.
24.
25.
have an output rating at 45 F in 400 fpm airflow of
120 microwatts/cm2 at 1 meter.
Hinged Panel Option:
Hinged panel option provide hinged access panels
for the filter, compressor, evaporator fan, and control
box areas. Filter hinged panels permit tool-less entry
for changing filters. Each hinged panel is permanently attached to the rooftop unit.
Emergency Heat Control Package:
When mechanical heating is locked out, auxiliary
heat shall be activated when necessary.
Glycol Coil:
Coil shall be 2-row copper tube (1/2-in. OD) with aluminum plate fins (15 fins/in.) and 1.625 in. OD copper headers. Input and output connections shall be
1.625 in. ODM copper stubs for sweat connection.
Coil shall be furnished with suitable support rails,
end plates, and hardware for ready field installation
in the heater compartment.
Winter Start Time Delay:
Used in conjunction with the accessory low ambient
kit or head pressure control device, the kit permits
operation in cooling at lower outdoor temperatures.
See price pages for more information.
Alternate Drive:
Alternate drive shall provide higher static drive capability to enhance indoor fan performance rpm range.
Stainless Steel Condensate Pan:
Stainless steel condensate pans shall be available
for condensate collection.
50TFQ004-012
542J150,180
121
INDEX
542J150,180 section 101-121
548F036-120 section 18-66,97-100
549B036-120 section 67-100
Airflow
Configuration 14
Maximum 14
Minimum 14
Application data 14,15
ARI capacity ratings
542J150,180 102
548F036-120 18
549B036-120 67
EconoMi$er
548F036-120 53
549B036-120 89
Changeover, heating to cooling 14
Controls 10-14
Convenience outlet 7,106
Cooling capacities
542J150,180 109
548F036-120 26-28
549B036-120 75,76
Dimensions
Accessory
542J150,180 105-107
548F036-120 23,24
549B036-120 72,73
Base unit
542J150,180 104
548F036-120 21,22
549B036-120 70,71
Ductwork 14
Economizer 6,14,53,89
Electric heating capacities
542J150,180 113
548F036-120 54
549B036-120 90
Electrical data
542J150,180 114
548F036-120 56-64
549B036-120 91-94
Fan performance
542J150,180 111,112
542J150,180 with horizontal adapter 113
548F036-120 32-51
549B036-120 80-87
Fan RPM at motor pulley settings
542J150,180 112
548F036-120 52
549B036-120 88
Features/Benefits 1-3
Glycol coil 7,113
Guide specifications
542J150,180 118-121
548F036-120 97-100
549B036-120 97-100
Horizontal adapter 106,113
Heating ratings
Instantaneous and integrated heating ratings
548F036-120 28-31
549B036-120 77-79
Integrated heating ratings
542J150,180 110
Indoor fan motor performance
542J150,180 114
548F036-120 55
549B036-120 89
Internal unit design 14
Minimum ambient cooling
operating temperature 14
Model number nomenclature
542J150,180 101
548F036-120 18
549B036-120 67
Multiplication factors
542J150,180 54
548F036-120 54
549B036-120 90
Non-fused disconnect 542J150,180 7,107
Options and accessories 4-9
Outdoor sound power 549B036-120 90
Outdoor installation 14
Performance data
542J150,180 109-114
548F036-120 26-55
549B036-120 75-90
Physical data
542J150,180 102,103
548F036-120 19,20
549B036-120 68,69
Piping and wiring
542J150,180 17
548F036-120 16
549B036-120 16
Power exhaust
542J150,180 107,112
548F036-120 53
549B036-120 89
With EconoMi$er
548F036-120 53
549B036-120 89
Roof Curb
542J150,180 105
548F036-072 23
548F090-120 24
549B036-072 72
549B090,120 73
Selection procedure
542J150,180 108
548F036-120 25
549B036-120 74
Static pressure drop
542J150,180 112
548F036-120 52
549B036-120 88
Thermostats 8,14
Thru-the-bottom power connections 14
Wiring schematic
542J150,180 115-117
548F036-120 65,66
549B036-120 95,96
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
UNIT MUST BE INSTALLED IN ACCORDANCE
WITH INSTALLATION INSTRUCTIONS
Copyright 2002 Bryant Heating & Cooling Systems
Printed in U.S.A.
1/02
Catalog No. 5254-804
Download PDF

advertising