User guide | BT 50 All in One Printer User Manual

PaperJet 50 User Guide
26/7/01
10:17 am PaperJet
Page 150 user guide – Edition 3 – 29.8.00
PaperJet 50
Plain paper fax, copier and telephone
User Guide
This product is intended to be connected to analogue networks and private switching systems in the United Kingdom.
This product has not been designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
Please open this page for an ‘at a glance’
guide to your PaperJet 50.
Please open this page for a ‘further at
a glance’ guide to your PaperJet 50.
PaperJet 50 user guide – Edition 3 – 29.8.00
At a glance
Plain paper sheet feeder
Paper support
Max. capacity 40 sheets of
80gsm paper.
Document feeder
Paper feeder width guide
Holds up to 5 sheets placed face
down for faxing or copying.
Adjust to fit the width of your
paper for A4, Letter and Legal
sizes.
Telephone line socket
Mains power socket
Document feeder
width guides
Adjust to fit the width
of your document for A4,
Letter and Legal sizes.
Handset
AB
C
1
2
DEF
3
Error
Play
GH
Half Tones
JK
5
MN
6
O
I
4
L
STD
PaperJet 50
Cover
Stop
Function
Last TX
Clear
Pause
䊴
F
䊳
Volume
Monitor
Recall
PQ
7
Start
0
Control panel
Document outlet
Outlet for received faxes, copied
documents and originals.
2
8
External
R
Copy
TU
Loudspeaker
WX
9
YZ
Speed Dial
Contrast
V
Resolution
RS
RX Mode
&...
Open the cover
for changing the
print cartridge
and clearing
document jams
Display screen
PaperJet 50 user guide – Edition 3 – 29.8.00
AB
C
1
2
DEF
3
E rror
Play
GH
Half Tones
JK
5
MN
6
O
PaperJet 50
I
4
L
STD
Stop
Function
RX Mode
䊳
Volume
Monitor
Recall
Speed Dial
Last TX
PQ
7
External
0
R
Copy
Start
Clear
Reduction/Enlargement button. Reduces and
enlarges copies to either 70% or 140%.
Resolution
䊴
Contrast
Contrast button. Adjusts the contrast of
documents to be copied.
Copy button. Press to start copying a document.
Copy
䊳
Speed Dial
Clear
Stop
Stop button. Stops the current operation.
Returns the fax machine to standby.
Last TX
Monitor button. Press to get dialling tone.
Pause
Monitor
Start
Function
F
RX Mode
3
Start button. Press to send a fax. Confirms an
option chosen from the menu. During a call, press
to receive a fax.
Function button. Function button lets you select
options from the menus.
RX Mode/Hold button. Selects reception
methods for faxes. When on a phone call, press to
put a caller on hold. They hear a beep.
&...
Resolution/Volume – button. Adjust the
resolution of documents to be faxed. Select next
option from a menu.
Decrease loudspeaker volume
Contrast/Volume + button. Adjust the contrast
of documents to be faxed. Select previous option
from a menu.
Increase loudspeaker volume
Recall
R
Error light. Indicates a problem when sending or
receiving a fax.
WX
9
Pause
Resolution button. Allows you to choose text or
photo resolution for copies.
E rror
TU
8
YZ
Contrast
䊴
V
Resolution
RS
F
External
Recall button.
Speed Dial/Clear button. Used to speed dial a
stored number. Deletes incorrect settings and
characters.
Last Number/Pause button. Press once to
display last number dialled. If you have a
document in the ADF it shows the last fax
number, if not it shows the last telephone number
called. Press again to dial the number
displayed.When dialling or storing a number,
press to enter a pause.
External button. Connects you to an outside line
when connected to a switchboard.
PaperJet 50 User Guide
26/7/01
10:17 am PaperJet
Page 450 user guide – Edition 3 – 29.8.00
Print head holder
Optical scanner
4
PaperJet 50 User Guide
26/7/01
10:17 am PaperJet
Page 550 user guide – Edition 3 – 29.8.00
Key features
Plain paper fax
Holds up to 40 sheets of A4 paper for ink
jet quality printing.
21 page memory
If you run out of ink or paper while
receiving a fax the document will be stored
in the memory and automatically printed out when
the new paper or ink has been added.
Copier with zoom
Make single or multiple copies of
documents. Enlarge copies to 140% or
reduce to 70%
One touch and speed dial memories
10 one touch memories and 31 speed dial
memories can each store a fax number,
phone number and name. Easy to display and scroll
through the memories.
5
PaperJet 50 User Guide
26/7/01
10:17 am PaperJet
Page 650 user guide – Edition 3 – 29.8.00
In this guide
At a glance
2
Introduction
7
Safety information
8
Setting up
9
Using your PaperJet 50
Sending faxes
To broadcast a document
Using the one-touch memories
Using the speed-dial memories
Reports and lists
Making and receiving phone calls
Copying documents
Additional features
Polling
Connecting an answering machine
6
15
15
19
21
22
24
26
28
29
33
35
Connecting to a switchboard
37
Help
39
Maintenance
44
Technical information
49
Index
51
PaperJet 50 User Guide
26/7/01
10:18 am PaperJet
Page 750 user guide – Edition 3 – 29.8.00
Introduction
Unpacking your PaperJet 50
For your records
When you unpack you should have:
Date of purchase:
PaperJet 50 with attached
mains power cable and
fitted 3-pin plug.
Place of purchase:
Serial number (on base of unit):
Telephone line cord
Proof of purchase is required for warranty purposes,
so please keep your receipt.
Starter print cartridge
Handset with cord
Paper support
Document holders for use
with torn, thin or small pages
7
PaperJet 50 User Guide
26/7/01
10:18 am PaperJet
Page 850 user guide – Edition 3 – 29.8.00
Safety information
Never put foreign bodies into the fax machine.
Their accidental contact with powered parts may
cause a fire or electric shocks.
Do not expose to direct sunlight.
Do not stand your fax machine on carpets or other
surfaces which generate fibres, or place it in
locations preventing free flow of air over its surfaces.
Do not submerge any part of your fax
machine in water and do not use it in damp
or humid conditions such as bathrooms.
Do not expose your fax machine to fire,
explosive or other hazardous conditions.
There is a slight chance that your fax
machine could be damaged by an electrical
storm. We recommend that you unplug the
power and telephone line cord for the duration of
the storm.
8
PaperJet 50 User Guide
26/7/01
10:18 am PaperJet
Page 950 user guide – Edition 3 – 29.8.00
Setting up
1 Plan the location of your PaperJet 50
3 Connect the handset
Place your PaperJet 50 on a stable, flat surface.
Make sure it is close enough to the telephone and
mains power sockets so that cables will reach.
Remember to leave enough room at the front of the
machine for documents to come out. Allow a free
flow of air around the machine for ventilation.
Plug the handset cord into the socket marked
at the back of the machine.
Place the handset in the cradle.
2 Fit the paper support
Fit the plastic support into the slot at the back of the
machine. Ensure it clicks firmly into place.
4 Connect the telephone line cord
1
2
Click into position
1 Plug the telephone line cord into the socket
marked LINE at the back of the machine.
2 Connect the other end to the telephone wall socket.
9
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:18 am PaperJet
Page 10
6. Load paper
NOTE
The socket in the back of the line plug is for line
connection of an answering machine.
Line connection from
answer machine.
The plain paper sheet feeder can hold up to 40 sheets
of 80gsm paper.
It can accommodate A4 (210 x 297mm), US Letter
(216 x 279mm), and US Legal (216 x 356mm) and
weights between 70-90gsm.
5 Connect the mains power
Maximum Level
Place the paper in the sheet feeder. Do not force it in.
Plug into the mains power and switch on.
Your PaperJet 50 performs a quick self-test.
The display shows:
AUTOMATIC RX
CHECK PRINT HEAD
Use the paper width adjustment lever to push the
paper against the left side of the feeder.
NOTE
When you need to add more paper, always slide it
under the paper that’s already loaded.
10
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:18 am PaperJet
Page 11
7 If necessary, check the paper size
setting
8 Install the starter print cartridge
Open the printer compartment cover.
Your PaperJet 50 is preset to use standard
A4 paper. If you need to use a different size
you will need to change the setting as
shown below.
To ensure your PaperJet is set to print on
the paper size you are using, check the
print format setting.
Function
F
Press the Function button until the display
shows FAX SET UP
Display shows DATE AND TIME
Remove the print cartridge from its packaging.
Holding it by the finger grip, peel the protective film
from the print nozzles.
Start
Function
F
Press the Function button until the display
shows PRINTER PARAMET
Display shows SIZE: A4
Start
Volume
Press until the display shows the paper size
you want.
To confirm the setting displayed.
Avoid touching the nozzles and metal electrical
contacts.
Start
Display shows AUTOMATIC RX
Stop
CHECK PRINT HEAD
Insert the cartridge into the holder with the
electrical contacts facing towards the front of the
machine.
11
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:18 am PaperJet
Page 12
Pull the cartridge towards the front of the machine
until you hear it click into position.
9 Automatic print quality test page
Your PaperJet 50 automatically cleans the
print nozzles and prints a test page.
Once printed, the display shows
CHECK PRINT OUT
1 = EXIT 0 = REPEAT
The printed sheet contains the following:
Close the cover.
If the display continues to show CHECK PRINT HEAD
the cartridge may not be installed properly. Open
the cover and check that the cartridge is correctly
orientated and clicked into position.
•
a numbered scale, to check ink flow and
the electrical circuits on the print head.
•
a set of graphics and text to assess print
quality.
Check the numbered scale for interruptions
and the black areas for horizontal white
lines. If none are present, the print head is
installed correctly and working normally.
Click into position
1
Press 1 if the test print is acceptable.
Or
0
If there is still a problem after printing three
test pages try:
NOTE
To replace the cartridge when it runs out of ink,
follow the instructions in the Maintenance Section
on page 44.
Should the message persist, you may need to clean
the electrical contacts and the carriage (see ‘To clean
the print head’, page 46).
•
changing the paper you are using, it may be
too porous.
•
•
removing and re-installing the print cartridge.
•
12
Press 0 to repeat the test.
cleaning the electrical contacts and print
nozzles (see ‘To clean the print head’,
page 46).
replace the print head.
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:18 am PaperJet
Page 13
10 Set the date and time
NOTE
The current date and time will be printed
on every fax page you send.
Function
F
Press the Function button until the display
shows FAX SET UP
Display shows DATE AND TIME
You can stop any procedure and return your
PaperJet 50 to standby at any time by pressing STOP.
If you do not press any button on your PaperJet 50
for 2 minutes it will automatically return to standby.
11 Enter your name and fax number
Start
Display shows FORMAT: DD/MM/YY
Start
You can select a different format by pressing
the < > buttons.
Your name and number will be added to
every fax page you send. You can enter a
maximum of 16 characters and 20 digits.
Display shows FORMAT: 24H
Start
Volume
Press the < > buttons to switch between the
24 hour clock and the 12 hour clock formats.
Display shows DD/MM/YY
Start
21 06 00
HH:MM
09 22
Function
F
Start
0-9
Volume
Enter the new date and time. Each time you
enter a digit the cursor moves on automatically.
Press the < > buttons to move the cursor
backwards and forwards if you need to
re-enter a digit.
Press twice. Display shows STATION NAME
Display shows TYPE YOUR NAME
Start
A-Z
Volume
&...
NOTE
If you have selected the 12 hour clock, the
letter p for pm or a for am is displayed.
To display the correct p or a setting, press
the FUNCTION button when the cursor is
flashing on the p or a.
Display shows TEL. LINE SET-UP
Function
F
The cursor flashes on the first digit of the
date.
Press the Function button until the display
shows INSTALLATION
Press the buttons to enter your name up to
a maximum of 16 characters.
Press the < > buttons to move the cursor
to the character you want or to insert a
space.
Press the ✱ and # buttons to enter different
symbols such as ‘&’.
Press the Clear button to delete entries.
Clear
Press to confirm the new date and time.
Start
To return to standby.
Stop
13
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:18 am PaperJet
Page 14
For example to enter the name JOHN:
JK
L
5
Volume
MN
O
6
Volume
GH
I
4
Volume
MN
O
6
Press the 5 button until the display shows J.
Press >
Start
0-9
Your name, fax number, date and time can
be shown at the top of the page outside the
text area or slightly lower down inside the
text area. The default setting is for the
header to be shown inside the text area.
You can switch between these two positions.
Press the 6 button until the display shows O.
Press >
Press the 4 button until the display shows H.
Press >
Function
Press the 6 button until the display shows N.
When you have finished entering your name
Start
To set the position of your fax header
To confirm. Display shows PHONE NUMBER
Display shows TYPE YOUR NUMBER
F
Start
Function
F
Display shows DATE AND TIME
Display shows VARIOUS SETTINGS
Press until the display shows HEADER
Start
Enter your phone number.
If you are entering your number in an
international format press the ✱ button to
enter a +.
Press the Function button until the display
shows FAX SET-UP
INSIDE
Your header will be printed inside the text
area.
Volume
Press to display INSIDE or OUTSIDE.
To confirm the displayed option.
Start
To return to standby.
Press to confirm.
Start
To return to standby.
Stop
14
Stop
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:18 am PaperJet
Page 15
Using your PaperJet 50
Sending faxes
Setting the contrast and resolution
What type of paper you can use
Dimensions:
• width
• length
After inserting the document in the feeder.
Contrast
148mm – 216mm.
216mm – 600mm.
Contrast
䊳
Volume
Thickness:
• 60 -90gsm
• 50 -140gsm
• 140 -160gsm
Do not use
Inserting documents in the feeder
• Gently insert documents to be faxed (up to 5 pages)
face down.
• Adjust the paper feeder width guides to fit.
Setting the contrast and resolution
You can choose different resolution and contrast
settings to ensure the best quality when faxing or
copying a document.
To select the setting you want.
• NORMAL – when the original document
is clearly printed.
• DARK – when the original document is
light.
• LIGHT – when the original document is
dark.
max 5 sheets.
1 sheet at a time.
when using the document holders.
• Torn, crumpled and rolled paper.
• Paper that is too thin (unless in the document
holder supplied).
• Wet or moist paper.
• Carbon paper.
• Correction fluid, paperclips and staples.
Press the Contrast button.
After the fax has been sent, your PaperJet
always resets to normal contrast.
Resolution
䊴
Volume
Resolution
Press the Resolution button.
To select the setting you want.
• STD (standard) – when the original
contains easy to read text.
• FINE – when the original contains small
or hard-to-read text or line diagrams.
• FINE and HALF-TONE – when the
original contains varying shades of grey
or pictures.
NOTE
FINE and HALF-TONE settings take longer to send.
15
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:18 am PaperJet
Page 16
To select the default resolution setting
Your machine is pre-set to STD resolution
for faxing and copying. You can change this
setting so that the resolution is
automatically set to FINE.
NOTE
If you make a mistake when entering a number,
press the < > buttons to move the cursor over the
digit and enter the correct digit. To delete the digit
press the Clear button.
NOTE
When the machine is in standby
Function
F
Start
Function
F
Press until the display shows FAX SET-UP
To display DATE AND TIME
All dialling is shown using 0-9 keypad. You can also
use one-touch or speed dialling if they are set.
To display VARIOUS SETTINGS
Press until the display shows TX RESOL. STD
Start
Volume
To switch between FINE and STD.
To dial and hear the progress of your
fax call
To confirm.
Start
To return to standby.
Place document face down in the document
feeder.
Stop
If necessary set the Contrast and
Resolution settings.
To send a fax
Monitor
Place document face down in the document
feeder.
If necessary set the Contrast and
Resolution settings.
0-9
Start
Use the keypad to dial the number you
want.
Press the Start button. The number is
dialled before your fax is scanned and sent.
When the fax has been sent, the display
shows TX COMPLETED to confirm a
successful transmission.
16
0-9
Start
Press the Monitor button. You hear the
dialling tone over the loudspeaker.
Use the keypad to dial the number you want.
When you hear the far end machine
respond press the Start button. Your fax is
scanned and sent.
When the fax has been sent, the display
shows TX COMPLETED to confirm a
successful transmission.
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:18 am PaperJet
Page 17
To dial using the handset
Place document face down in the document
feeder.
If necessary set the Contrast and
Resolution settings.
Pick up the handset and listen via the
earpiece.
0-9
Start
Use the keypad to dial the number you want.
If the other person’s fax machine is set up
for automatic reception, you hear the fax
tones, press the Start button and replace
the handset. Your fax is scanned and sent.
If your call is answered in person, ask them
to press the start button on their fax
machine. You will then hear their fax tones.
Start
Automatic re-dialling
If a fax fails to be sent, for example, the number
dialled was engaged, your PaperJet 50 will
automatically retry up to 3 times at 2 minute intervals.
If after all retries, the fax has not been sent, the
document will be deleted from memory (if using
MEMORY TX) or ejected from the sheet feeder. You
have the option of retaining failed MEMORY TX
faxes in memory to enable you to try sending them
again without re-scanning. To do this you must enable
the document retransmission feature.
To switch document retransmission on/off
The default setting is off.
Function
F
Press the Start button and replace the
handset. Your fax is scanned and sent.
Press the Start button. Display shows
Start
When the fax has been sent, the display
shows TX COMPLETED to confirm a
successful transmission.
Press the Function button until display
shows FAX SETUP
Function
F
DATE AND TIME
Press the Function button. Display shows
VARIOUS SETTINGS
Press the Start button until display shows
NOTE
To stop a fax being sent at any time, press the Stop
button.
Start
Volume
Start
To redial the last number
RETRANS.DOC: OFF
Press the < > buttons to switch between
ON and OFF.
Press the Start button to confirm the option
displayed.
The machine returns to standby.
Stop
Last TX
Press the Last Number button twice.
Pause
17
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:18 am PaperJet
Page 18
To send a fax at a pre-set time (delayed
faxing)
You can set your PaperJet 50 to send a fax
at a specific time in order to take advantage
of cheaper call rates or to allow for different
time zones.
Place document face down in the document
feeder.
NOTE
To cancel your pre-set fax transmission, press
the Stop button or remove the document from the
document feeder.
If you want to store the document in memory
for delayed faxing, see “To fax from memory” on
page 19.
To change the details of a pre-set fax
If necessary set the Contrast and
Resolution settings.
Function
F
You can set a new time and fax number.
Press until the display shows DELAYED TX
Function
Press the Start button.
F
Press until the display shows DELAYED TX
Start
Display shows TYPE TIME
Display shows ALREADY ENTERED
Start
HH:MM
Display shows CHANGE PARAM?
Start
If using the 12 hour clock, press the Function
button to switch between a for AM and p for PM.
Either
Volume
Press the < > buttons to move the cursor.
Start
0-9
Start
123
Start
Enter the number you want.
Press to confirm. Display shows the time at
which the fax is due to be sent
AUTOMATIC RX
TX AT
18:30
18
To confirm. The fax is cancelled and your
machine returns to standby.
Or
Enter the time at which you want your fax
to be sent, e.g. 18.30.
Display shows TYPE FAX NUMBER
Press to display CANCEL SETTING
Display shows TYPE TIME
Start
0-9
Enter the new time at which you want your
fax to be sent, e.g. 19.00
Display shows TYPE FAX NUMBER
Start
Press to confirm. Display shows
Start
AUTOMATIC RX
TX AT
19.00
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:18 am PaperJet
Page 19
To broadcast a document
Start
You can set your machine to send a document to up
10 different numbers (broadcasting).
See “To fax from memory” below.
Start
0-9
To fax from memory
Your PaperJet 50 has a memory which lets
you store one document for sending at a
pre-set time.
Function
F
Start
Display shows TX FROM MEMORY
Start
You can change the number if required.
After entering your last number press Start
again to confirm. Display shows TX SET
then AUTOMATIC RX (or current receive
mode) and MEMORY TX.
To change, re-send or cancel a stored
document
The document is scanned into the memory.
Display shows STORING then TYPE TIME
When you have stored a document in the
memory for sending later:
HH:MM
If using the 12 hour clock, press the Function
button to switch between a for AM and p for PM.
Display shows TYPE NUMBER and the
number already entered.
Repeat the last step until you have entered
all the numbers you want up to a maximum
of 10.
Place document face down in the document
feeder.
If necessary set the Contrast and Resolution
settings.
Display shows TYPE FAX NUMBER. If
required, enter the second number to which
you want to send your fax and press the
Start button again.
Display shows AUTOMATIC RX
Start
MEMORY TX
Function
Press the < > buttons to move the cursor.
F
Display shows TX FROM MEMORY
Display shows ALREADY ENTERED
0-9
Enter the time at which you want your fax
to be sent, e.g. 18.30 or press the Start
button to select the current time.
Start
Display shows PRINT SETTING?
Start
Volume
Display shows TYPE FAX NUMBER
Start
0-9
Use the keypad to dial the number you
want.
Press to switch between this and the other
two options CHANGE PARAM? or CANCEL
SETTING?
Press to select the option displayed.
PRINT – you get a print out of the fax
details and then the machine returns to
standby.
19
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:19 am PaperJet
Page 20
CANCEL – the machine cancels the
memory setting and returns to standby.
CHANGE PARAM? – you can change the
fax number and time settings. Display
shows TYPE TIME.
0-9
Start
0-9
Receiving faxes
RX Mode
Change the time if required.
Press to display the following settings.
Display shows TYPE NUMBER and the
number already entered.
AUTOMATIC RX – This is Automatic reception.
Your fax machine automatically answers fax
calls (this is the default setting).
You can change the number if required.
Repeat the 2 steps above for all the numbers
that have been entered.
Start
0-9
TAD FAX – This is the receive mode to use
if you want to use your machine in
conjunction with a telephone answering
machine to enable you to take fax and voice
messages.
Display shows TYPE FAX NUMBER.
Enter a new number if required.
Repeat the last step until you have entered
all the numbers you want up to a maximum
of 10.
Start
MANUAL RX – This is Manual reception.
You answer calls in person and receive faxes
by pressing the Start button if you hear the
fax tones.
After entering your last number press Start
again to confirm. Display shows
AUTOMATIC RX (or current receive mode)
and MEMORY TX.
PHONE/FAX RX – This is Automatic reception
with call recognition. After the set number
of rings (default 2), your fax machine will
answer the call. If it is a fax, it is received.
If it is a voice call the machine beeps for up
to 20 seconds and the display shows LIFT
HANDSET. If you do not lift the handset the
machine prepares to receive a fax.
Start
20
By pressing the RX MODE button you can
set your PaperJet 50 to receive a document
in four different ways:
If you pick up the phone before your
machine takes the call and you hear fax
tones, press the Start button to begin
reception and hang up the handset.
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:19 am PaperJet
Page 21
Using the one-touch memories
To store a one touch entry
Using the codes 0-9, your PaperJet 50 has
10 one-touch memories under which you
can store a name, fax number and telephone
number.
Using the keypad to enter names and
numbers
The keypad lets you type letters when you
are asked to enter a name.
You can store numbers up to 52 digits long,
and names up to 16 characters long, in each
one-touch memory.
For example to enter the name JOHN:
JK
L
5
Press the 5 button until the display shows J.
Function
Volume
MN
O
6
Volume
GH
I
4
Volume
MN
O
6
Volume
&...
Volume
Speed Dial
Clear
Press >
Press the 6 button until the display shows O.
Press >
F
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Start
Function
F
Press until the display shows ONE TOUCH
DIAL
Press the 4 button until the display shows H.
Press >
Press the 6 button until the display shows N.
Display shows TYPE ONE TOUCH
Start
0-9
Press >
Press the ✱ and # buttons to enter
different symbols such as ‘&’.
Press the < > buttons to move the cursor to
the character you want.
Volume
Start
Enter a single digit 0-9 to set the one touch
memory location under which the name
and number will be stored, e.g. 1 Display
shows FAX NO.
Press to switch between FAX or TEL NUMBER.
Press to select the fax or phone number
setting you want.
Display shows 1: FAX or TEL NUMBER.
To delete the number or name you have
entered completely, press the Clear button.
0-9
Enter the number you want to store.
If necessary, press the < > buttons to move
the cursor.
Press to confirm. Display shows 1: NAME
Start
A-Z
Volume
Enter the name you want to store.
Press the < > buttons to move the cursor.
Press to confirm. Display shows EDIT
Start
ANOTHER? YES
21
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:19 am PaperJet
Page 22
If you stored a fax number you can now add
a phone number to the memory or vice
versa. You can also create a new memory
entry.
To send a one-touch fax
Place document face down in the document
feeder.
Press to return to standby
Start
Or
If necessary set the Contrast and Resolution
settings.
Press to enter another name or number.
Start
Repeat the procedure above to enter names
and numbers.
Start
Stop
0-9
Press to confirm your last entry.
Press and hold the 0-9 memory location
number for one second. The name is
displayed and then the number is displayed
and dialled.
Press to return to standby. Your entries
have been stored.
Using the speed-dial memories
To edit or delete a one-touch entry
To store a speed dial entry
Follow the steps shown above to store a
one touch entry selecting the location you
want to change or delete. A new name and
number will overwrite the existing entry
selecting the location you want to change
or delete.
To edit an entry , press the < > buttons to
move the cursor over the digit or character
you want to change and enter the correct
one.
Speed Dial
Clear
To delete a name or number, press the
Clear button when the name or number is
displayed during these steps.
Using the codes 01 – 32, your PaperJet 50
has 32 speed dial memories under which
you can store a name and fax number and
telephone number.
You can store numbers up to 52 digits long
in each speed dial memory and names up to
16 characters.
Function
F
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Start
Function
F
Press until the display shows CODED SPEED
DIAL
Display shows TYPE SPEED NO.
Start
01-32 Enter the two digit speed dialling code
under which the name and number will be
stored, e.g. 01. Display shows FAX NO.
22
PaperJet 50 User Guide
Volume
Start
26/7/01
50 user guide – Edition 3 – 29.8.00
10:19 am PaperJet
Page 23
Press to switch between FAX or TEL NUMBER.
To edit or delete a speed dial entry
Press to select the fax or phone number
setting you want.
Follow the steps shown above to store a
speed dial entry. A new name and number
will overwrite the existing entry.
Display shows 1: FAX or TEL NUMBER.
0-9
Enter the number you want to store.
If necessary, press the < > buttons to move
the cursor.
Volume
Press to confirm. Display shows 1: NAME
Start
A-Z
Volume
Enter the name you want to store.
Press the < > buttons to move the cursor.
Press to confirm. Display shows EDIT
Start
Clear
ANOTHER? YES
If you stored a fax number you can now add
a phone number to the memory or vice
versa. You can also create a new memory
entry.
Stop
Speed Dial
To return to standby
Place document face down in the document
feeder.
Start
Stop
If necessary set the Contrast and Resolution
settings.
Press to enter another name or number.
Repeat the procedure above to enter names
and numbers.
Press to confirm your last entry.
Press to return to standby. Your entries
have been stored.
To delete a name or number, press the
Clear button when the name or number is
displayed during these steps.
To send a speed dial fax
Or
Start
To edit an entry , press the <> buttons to
move the cursor over the digit or character
you want to change and enter the correct
one.
Speed Dial
Clear
Press the speed dial button. Display shows
FAX CALL
CODE OR < >
01-32 Enter the memory location number under
which the fax number is stored. The number
is dialled.
Or
Volume
Press to scroll through fax numbers until
the one you want is displayed.
And
The number is dialled.
Start
23
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:19 am PaperJet
Page 24
Reports and lists
What the report terms mean
Reports contain the following information:
Your PaperJet 50 prints the following reports
Power failure report
Always printed automatically.
– if a power failure occurs while a fax is being sent
or received the report gives you details about
that fax.
– if a power failure occurs before sending when a
document has been stored in the memory, or after
a fax has been received into memory and not
printed out, the report details the number of pages
lost from the memory and the date and time of
power failure.
Each fax sent and received is given
a number.
Type
The type of operation:
TX, TX ECM, TX POLL, TX POLL ECM
for faxes sent.
RX, RX ECM, RX POLL, RX POLL ECM
for faxes received.
Doc. N.
Reference number of document
stored in the memory for sending.
Dialled Number Fax number dialled.
Received Id
Number (and name if available) of the
person called providing it has been
stored on their fax machine.
Date/Time
Date and time fax was sent or received.
Transmission report
Duration
Length of call in minutes and seconds.
Provides confirmation of the results of the last fax
sent. You can set your PaperJet 50 to print a last
transmission report after every fax, every failed fax,
or upon request. The default is every failed fax.
Pages
Total number of pages sent or received.
Result
OK if fax was sent or received
successfully.
XX ERROR CODE if the fax did not go
through properly. See page 41 for the
meaning of the error codes.
Activity report
Provides details of the last 32 faxes sent and
received. The report is printed automatically and
you can request an activity report at any time.
Broadcasting report
Contains details about the last broadcast fax sent
(see page 25). It is printed automatically after each
broadcast fax. You can switch this setting off. The
default is ON.
Delayed transmission report
This is a report that is printed automatically when
you set a delayed transmission. It gives the number
dialled and the time of the transmission. The default
is OFF.
24
Act. n.
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:19 am PaperJet
Page 25
To switch automatic printing of
transmission and error reports on and off
Function
F
Start
Function
F
Press until the display shows FAX SET-UP
To switch automatic printing of delayed
transmission on and off.
Function
F
Display shows DATE AND TIME
Start
Display shows VARIOUS SETTINGS
Volume
REPORT
F
Volume
Start
TX REPORT ALWAYS – print a report after
every received or sent fax.
Display shows VARIOUS SETTINGS
Press until the display shows
Start
Press to display the option you want
FAILED TX REPORT – print a report only
after a fax has failed to be sent or received.
Display shows DATE AND TIME
Function
Press until the display shows FAILED TX
Start
Press until the display shows FAX SET-UP
Stop
DELAY LIST: OFF
Press to switch between the ON and OFF
settings.
Press to confirm the option displayed.
Press to return your machine to standby
TX REPORT OFF – no reports will be printed.
Press to confirm.
To request immediate print-outs
Start
Press to return your machine to standby.
Stop
To switch automatic printing of
broadcast reports on and off
You can get print-outs of transmission,
activity and broadcasting reports.
Function
F
Press until the display shows FAX SET-UP
Display shows DATE AND TIME.
Start
Volume
Start
Function
F
REPORT
Display shows LAST TX REPORT
Function
F
Press until the display shows PRINT OUT
Press to select the report you want to print:
LAST TX REPORT
Display shows VARIOUS SETTINGS.
LAST BROAD. REP
Press until the display shows BROADC.
Start
Volume
REP: ON
ACTIVITY REPORT
Press to switch between the ON and OFF
settings.
printing.
Press to confirm the option displayed.
Start
PRINT OUT: EXIT – to cancel without
Press to confirm the option displayed.
Start
Press to return your machine to standby.
Stop
25
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:19 am PaperJet
Page 26
Your PaperJet 50 prints the following lists
You can obtain at any time a print-out of:
– setup and configuration of your machine
– speed dialling entries
– one-touch entries.
To print the configuration, speed dial
and one-touch lists
Function
F
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
To print the set-up list
Start
Function
F
Press until the display shows PRINT OUT
SET UP
Function
F
Start
Press until the display shows INSTALLATION
Display shows TEL. LINE SET-UP
Display shows PRINT SETTINGS
Start
Volume
Function
F
Press until the display shows PRINT INSTALL.
Display shows PRINT OUT:
Start
Start
Start
Stop
Press to start the printout.
Or
Press to start the print out.
Or
Press to display the option you want ONE
TOUCH, SPEED DIAL or SETTINGS.
Stop
To return to standby without printing.
To return to standby without printing.
Making and receiving phone calls
You can use your PaperJet 50 as a normal telephone.
To make a phone call.
Lift the receiver.
0-9
26
Dial the phone number.
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:19 am PaperJet
Page 27
To dial a one-touch phone number
To search through the speed dial entries
Do not put a document in the document
feeder.
Do not put a document in the document
feeder.
You can dial without lifting up the handset.
0-9
Press and hold the memory location
number you want until the telephone number
(if stored) is displayed. The number is
automatically dialled.
When you hear your call being answered,
lift the handset and talk.
You can dial without lifting the handset
Speed Dial
Clear
Volume
Start
Press the Speed dial button. Display shows
TEL CALL
CODE OR < >
Press to scroll through the entries until the
one you want is displayed.
The number is dialled.
When you hear your call being answered,
lift the handset and talk.
NOTE
You can dial by all methods by lifting the handset
first if you wish.
For one touch and speed dial numbers use the speed
dial button.
To put a caller on hold
You can put a caller on hold while you talk
to someone else close by.
To make a speed dial call
Do not put a document in the document
feeder.
RX Mode
Press to put your caller on hold.
Your caller will hear a beep, and will not be
able to hear you.
RX Mode
Press again to resume your conversation.
You can dial without lifting the handset.
Speed Dial
Press the Speed dial button.
Clear
01-32 Enter speed dial code you want. The
telephone number (if stored) is displayed
and dialled.
When you hear your call being answered,
lift the handset and talk.
27
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:19 am PaperJet
Page 28
Copying documents
Your PaperJet 50 can act as a convenience copier
and make multiple copies of a document as well as
enlarging or reducing your original.
To stop copying
Stop
Remove any remaining sheets of paper in
the document feeder.
Do not use
•
•
•
•
•
Torn, crumpled and rolled paper
Paper that is too thin
Wet or moist paper
Carbon paper
Correction fluid, paper clips or staples.
To copy a document
Insert the document to be copied into the
document feeder.
Copy
Press the Copy button. Display shows the
current contrast, resolution and size
settings.
100% TEXT
NORMAL
Select the contrast LIGHT, DARK, NORMAL.
Select the resolution TEXT, PHOTO
Select the size 100%, 140% 70%.
1-9
Copy
28
Enter the number of copies required.
Your machine scans the document one
page at a time, printing the copies after
each page.
Press the Stop button. Display shows copy
interrupted.
Press the Stop button again to confirm.
Stop
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:19 am PaperJet
Page 29
Additional features
To set the print quality
To set the print area of a document
You can adjust the output quality of the
printer. There are 2 settings: NORMAL and
HIGH QUALITY. The default setting is
HIGH QUALITY.
You can set the print area of a received fax
to 70% 76%, 80% or 94% of the original.
The recommended reduction settings are:
A4 = 94%, Letter = 80%, Legal = Off
(no reduction).
Function
F
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Start
Function
F
Press until the display shows PRINTER
PARAMET.
The default setting is 94%.
Function
F
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Start
Press until the display shows COPY: NORMAL
Start
Volume
Function
F
Press to switch between NORMAL and
Press until the display shows PRINTER
PARAMET.
Press until the display shows REDUCTION 94%
HIGH QUAL
Start
Start
Press to confirm the option displayed.
Volume
To return your machine to standby.
Stop
Start
Press to switch between 94%, 80%, 76%, 70%
and OFF.
Press to confirm the option displayed.
To return to standby.
Stop
29
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 30
To receive a document longer than the
paper size
If you receive a document sent using a
longer paper size than the one in your fax
machine, you may find the text is cut off.
If the fax machine is set to AUTOMATIC
RX or PHONE FAX RX, it is pre-set to
answer incoming calls after 2 rings.
You can make the fax print the remaining
text on another sheet.
You can change the number of times it rings
before taking the call
Function
F
Start
Function
Press until the display shows FAX SET-UP
F
Display shows DATE AND TIME
Press until the display shows INSTALLATION
Display shows TEL.LINE SET-UP
Start
Function
F
To set the number of rings before your
fax machine takes a call
Display shows PRINTER PARAMET.
Press until the display shows RING COUNT:02
Start
Press until the display shows SURPLUS: AUTO
Start
Volume
Press to select ON from the options of AUTO,
ON and OFF
If you select AUTO, your machine will print
remaining text on another sheet providing
it fills at least 12 mm of the page. By
selecting ON you ensure that any surplus
text is printed on another page. If you select
OFF, your machine will not print any surplus
text.
Press to confirm.
Start
Stop
To return to standby.
Volume
Start
Press to set the number of rings to 01, 02,
04 or 08.
Press to confirm the option displayed.
To return to standby.
Stop
To adjust the ringer volume
You can switch between High, Medium,
Low and Off. The default setting is High.
Function
F
Start
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Function
F
Display shows VARIOUS SETTINGS
Press until the display shows RING VOLUME:
Start
Volume
HIGH
Press to switch between the settings HIGH,
MEDIUM, LOW and OFF.
Press to confirm the option displayed.
Start
To return to standby.
Stop
30
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 31
To adjust the duration of the phone call
alert beeps
To change the remote start code
Function
F
When your PaperJet 50 is set to
PHONE/FAX RX mode it automatically
answers all calls. If it is a phone call, it is set
to beep for 20 seconds to alert you to pick
up the handset. You can adjust the duration
of these beeps.
Press until the display shows PUB.LINE
Start
Press until the display shows INSTALLATION
Display shows TEL.LINE SET-UP
Start
Start
Volume
Press until the display shows REMOTE
Start
Volume
Press until the display shows FAX/TEL
TIMER:20
Press to switch between the options of 15,
20, 30 and 40 seconds.
Start
0-9
Press to confirm the option displayed.
Start
To return to standby.
Stop
Receiving a fax call via an extension phone
(Remote Start)
(PSTN)
If connected to a switchboard, press the >
button to display PRIV. LINE (PBX).
Function
F
Press until the display shows INSTALLATION
Start
Stop
START: ON
Press to switch between ON and OFF. If you
select Off, you will not be able to enter a
code on the attached phone to receive a fax.
Display shows TYPE CODE
Enter the 0-9 digit you want after the ✱.
It is shown in the display, e.g. *8 Note that
the first ✱ cannot be changed.
Press to confirm.
To return to standby.
If you answer a call on an extension phone connected
to the same line as your PaperJet 50 and you hear
fax tones, you can switch your PaperJet 50 into fax
receive mode by dialling ✱ 5. This is like pressing
the Start button.
When you hear your PaperJet 50 respond with its
own fax tones, hang up the extension phone.
You can replace the 5 of this code with any digit
from 0-9.
31
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 32
To switch the fax tones on and off
To adjust the volume of the buzzer
Function
Your machine will automatically play
dialling tones and fax connection tones over
the loudspeaker so that you can hear the
progress of the call. You can switch the
tones on and off.
Function
F
Start
Press until the display shows
INSTALLATION
Start
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Function
F
Display shows VARIOUS SETTINGS
Press until the display shows BUZZER VOL.LOW
Start
Volume
Display shows TEL.LINE SET-UP
Function
F
F
Press to switch between HIGH, MEDIUM, LOW
and OFF.
Press to confirm the option displayed.
Start
Until the display shows DIAGNOSTICS
To return to standby.
Stop
Start
Volume
Press until the display shows LINE
MONITOR: ON
Press to switch between ON and OFF. If you
select OFF, you will not hear the dialling and
fax connection tones.
To adjust the speed a fax is sent at
Your PaperJet 50 is set to send faxes at
9600bps. If you consistently fail to send
faxes to a particular number it might help
to reduce the transmission speed to
4800bps.
Press to confirm the option displayed.
Start
To return to standby.
Stop
Function
To adjust the loudspeaker volume
F
Start
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Function
While the machine is in standby
Monitor
Volume
Display shows TYPE NUMBER.
Press to raise or lower the volume.
F
Display shows VARIOUS SETTINGS
Press until the display shows TXSPEED 96
Start
Volume
Press to switch between AUTO 9.6 and 4.8.
Press to confirm the option displayed.
Start
To return to standby.
Stop
32
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 33
To switch ECM mode on/off
Function
F
Start
ECM (Error Correction Mode) is a system
for correcting errors caused by
interference on the line. When switched on,
the display shows E when sending or
receiving to/from another machine using
ECM. The default setting for your machine
is to have ECM switched ON and you
should not have to change it. However, you
can switch it off if you wish.
Press until the display shows FAX SET-UP
Polling
Polling lets you call another fax machine to retrieve
a document automatically.
It also enables another fax machine to call your
PaperJet 50 and request a document that you have
set ready to be received.
This is often also known as ‘faxback’.
To poll a document from another fax
machine
Display shows DATE AND TIME
Function
F
Display shows VARIOUS SETTINGS
Press until the display shows ECM: ON
Start
Volume
Press to switch between ON and OFF.
Press to confirm the option displayed.
Start
Function
F
To return to standby.
When you know that another fax machine
has a document ready for polling, you can
set your PaperJet 50 to receive the
document.
Press until the display shows POLLING RX
Press until the display shows TYPE TIME
Stop
Start
Either
0-9
Enter the time you want to start calling the
other fax machine then press Start.
Or
Start
Press the Start button to begin polling
immediately. Display shows TYPE FAX
NUMBER
0-9
Start
Dial the number of the fax machine from
which you want to poll a document.
Press to confirm. Display shows POLL RX
and the time at which you have set it to poll.
You can still send and receive other faxes as
normal.
33
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 34
To cancel polling
To set a document for polling by another
fax machine
When you have set a polling time
Function
F
Insert a document in the document feeder.
Display shows DOCUMENT READY
Press until the display shows POLLING RX
Display shows ALREADY ENTERED
Set the resolution and contrast if necessary.
Start
Display shows CHANGE PARAM?
Start
Volume
Start
Function
F
To display CANCEL SETTING?
To confirm cancellation. Your fax machine
returns to standby.
Press twice. Display shows AUTOMATIC RX
Start
Stop
To change a polling time and number
Function
F
Start
When you have set a polling time
Press until the display shows POLLING RX
Display shows ALREADY ENTERED
Display shows CHANGE PARAM?
Start
Display shows TYPE TIME
Start
0-9
HH:MM
If required, use the keypad to enter the new
time. This overwrites the original one.
Display shows TYPE NUMBER
Start
0-10
If required, enter the new number. This
overwrites the original one.
Display shows AUTOMATIC RX
Start
Start
34
POLL RX
To confirm. Your machine returns to
standby.
Press until the display shows POLLING TX
POLLING TX SET
To cancel polling remove the document
from the feeder. To cancel during polling
press Stop.
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 35
Connecting an answering machine
Your PaperJet 50 can work with an answering
machine so that you can take voice and fax messages.
To ensure the two machines work together, the fax
machine must be in TAD/FAX RX mode and the
answering machine line cord must be connected into
the socket on the back of the PaperJet 50’s line cord
doubler plug.
To set up your answering machine
If you can choose the number or rings
before your answering machine takes the
call (refer to your answering machine’s
guide for instructions), it is recommended
that you set the number of rings to between
2 and 4.
For optimum performance, the outgoing
message on the answer machine should be
as short as possible and should not exceed
the times shown below:-
DOUBLER PLUG LEAD
FROM PAPERJET 50
PLUG LEAD FROM
ANSWER MACHINE
When set up like this, and a call comes in, your
answer machine will always answer the call first.
Your PaperJet 50 will monitor the call and take
control if it detects that is is a fax call.
If the answering machine fails to answer, PaperJet 50
will answer the call after 10 rings and prepare to
receive a fax.
To set the receive mode
RX Mode
Press to display TAD/FAX RX.
No. of rings
before answer
Length of
outgoing message
2
14 seconds
4
8 seconds
If your fax machine fails to take fax calls off the
answering machine
If your PaperJet 50 fails to take fax calls from the
answer machine then first you should check that the
outgoing message on the answer machine is not too
long. If the outgoing message is OK, the problem
may be because the calling machine is not sending
fax tones (some older machines do this). Your
PaperJet 50 should cope with this by switching to fax
if it detects long periods of silence – it is preset to
switch to fax if it detects 6 seconds of silence. You
may need to shorten this detection time to suit your
particular answer machine.
35
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 36
If your fax machine interrupts when messages
are being left
If your PaperJet 50 sometimes switches to fax while
callers are trying to leave a message, it may help to
increase the silence detection time or to switch it off.
To change the silence detection time
Function
F
Press until the display shows INSTALLATION.
Display shows TEL.LINE SET UP.
Start
Start
Volume
Press until the display shows SILENCE
LAPSE: 6.
Press to set the lapse time to 3, 4, 6, 8, 10
seconds or NO (off).
Press to confirm the option displayed.
Start
Press to return to standby.
Stop
36
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 37
Connecting to a switchboard
You can store the access code required to get an
outside line so that you only have to press the
EXTERNAL button.
With some switchboards you may also need to switch
your PaperJet 50 from TONE dialling to PULSE
dialling. Check with your switchboard manager or
supplier to see if this is necessary.
To set the dialling mode and access
number
Volume
Press the < > buttons to display the options:
FLASH or PREFIX. If your access code is
recall choose FLASH. If your access code is a
digit(s) choose PREFIX.
Press Start to confirm your choice.
Start
If you select PREFIX you are asked for the
code needed to get an outside line via your
switchboard (max. three digits).
0-9
Enter your code.
To confirm.
Start
Display shows PSTN DIAL: TONE
While your PaperJet 50 is in standby mode
Function
F
Start
Press the Function button until the display
shows INSTALLATION
Display shows TEL.LINE SET-UP
Volume
Press to switch between TONE and PULSE
settings to suit your switchboard.
To confirm.
Start
To return to standby.
Stop
Display shows PUBL. LINE (PSTN)
Start
Volume
Press until the display shows PRIV. LINE
(PBX)
Display shows PBX DIAL: TONE
Start
Volume
Start
Press to switch between TONE and PULSE.
Press to confirm. Display shows
EXT. LINE: PREFIX
37
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 38
Using the External button
External
External
External
You can use the External button to insert
the access code before numbers stored
in the one touch and speed dial memories.
Before entering the number (pages 21-22),
press External, an E will appear in the
display, and continue entering the number
as normal.
When dialling manually, just press External
before dialling the number.
To switch dialling mode during a call
If you are using your PaperJet 50 in PULSE
dialling mode, you can change to TONE
mode during a call using the ✱ button. This
might be useful when calling interactive
services such as the BT Customer Services
line on 150.
After pressing the ✱ button all subsequent
digits will be dialled in TONE mode. When
you end the call, dialling will revert to
PULSE mode.
38
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 39
Help
The error light comes on and an error message
is displayed.
An error report is automatically printed. Press the
Stop button to reset the machine and check the
message against the Error Messages list, page 42.
If you run out of paper or ink.
Your PaperJet 50 will store incoming faxes in the
memory.
If you run out of paper or ink or the paper jams
during reception, or if you open the printer cover,
printing will stop and the fax you are receiving
will be stored in the memory. Once the problem
has been resolved, your machine will start
printing again.
If there is a power failure
In the case of power failure, the fax machine will
keep the data for:
• date and time
• machine settings
• numbers stored in the one-touch and speed
dial memories
• reports
Any documents stored in the memory will be lost.
When the power is restored your machine will
print out a report which shows the total number
of pages (both received and stored for sending)
lost from the memory.
Your machine doesn’t switch on
Check that the mains power is plugged in and
switched on.
The document cannot be inserted into the
document feeder
Check the size of the document. See page 15 for
correct sizes.
Fax documents are not sent
Check that the document is not jammed in the
machine.
The line may be busy. Your machine will retry
automatically 3 times at 2 minute intervals.
39
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 40
Your machine does not receive faxes
automatically
• Check that is has not been set for manual
reception.
• Check that you have ink and paper.
• Check for paperjams.
You cannot print faxes or copy documents
• Check for paper jams.
• Check that you have ink and paper.
• The type of paper you are using may not be
correct, check paper size and weight shown on
page 15.
Your machine prints out completely blank copies
You may have inserted the document to be copied
the wrong way around. Place the side to be copied
face down.
40
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 41
Error codes
Other problems may be accompanied by a display of ERROR CODE and a number. Check the number against
the list below.
CODE
MESSAGE
ERROR CAUSE
ACTION
OK
No message. Operation completed
successfully
No action.
03
RECEIVER DOES NOT ANSWER
The number you are calling does not
answer or is not a fax or there is no
dial tone.
Check for dial tone by lifting the
handset and if OK try calling again.
04
ERR.WHILE TRANSMITTING
RESEND FROM PAGE: nn
A problem has occurred while
sending a fax. “nn” = page number
on the which the error occurred.
Send again starting from the
page shown in the report.
05
RESEND PAGES:
nn, nn
The machine you are calling
detected errors during the send.
“nn” = page number on which
the error occurred.
Send again starting from the page
shown in the report.
07
DOCUMENT TOO LONG or
SENDING STOPPED
Transmission time for a page exceeds
the permitted limit.
Try sending again.
08
CHECK THE DOCUMENT
Optical scanner unable to read
the document or document may be
too long.
Remove and re-insert document in
the feeder and try again.
Check paper is not longer than
360mm (US Legal Length).
09
STOP PRESSED
You have stopped the machine.
No action.
10
No message
Fax has detected an error while
receiving a fax.
Ask sender to send fax again.
11
No message
Printer problem while receiving a fax.
Document stored in the memory
but the memory capacity has been
exceeded.
Correct the printing problem, then
wait for the stored document to be
printed. Ask sender to fax the rest
of the document.
13
ERRORS WHILE POLLING
Polled fax machine has no document
ready or was not set for polling.
Contact the sender.
16
POWER FAILURE ON PAGE
Power failure while sending or
receiving a document.
Send again from the page shown on
the report.
(OK)
No message.
Document has been received but
printing quality is poor.
Contact sender.
OCC
LINE BUSY
The line is engaged.
Try again later.
41
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 42
Error messages
If you see an error message on the display, check
here for its meaning and solution. Messages are listed
in alphabetical order.
AUTOREDIAL nnn
COVER OPEN
Close the printer compartment cover.
DOC IN MEMORY
A received fax is stored in the memory because it
could not be printed right away. Check the problem
on the display and clear it.
Last fax call failed. Your machine will redial after
nnn seconds.
LAST TX ERR. XX
CHECK DOCUMENT, PRESS
The last fax sent was not completed successfully.
Press the Last TX button to send again or press the
Stop button to return your machine to standby.
The document is not going through properly.
Remove and re-insert the document in the document
feeder. Press the Stop button to return to standby
and send again.
MEMORY FULL
You have run out of paper. Add paper and press the
Stop button to return to standby.
Because of a printing problem (no paper, paper jam,
no ink, cover open etc) documents have been
received into the memory. Resolve the printing
problem and the documents will automatically be
printed and the memory cleared.
Or
NOT PROGRAMMED
The paper is not going through properly. Remove
and re-insert the paper. Press the Stop button to
return to standby.
You have chosen a one-touch button or speed dial
code which does not have an entry stored.
CHECK PAPER, PRESS
OUT OF INK
CHECK PRINT HEAD
The print head has not been installed or has been
installed incorrectly. Install the print head again.
The ink in the cartridge has run out. Change the
cartridge (see Changing the print head/cartridge,
page 44).
Some print nozzles may be damaged, reducing print
quality. Clean the print head (see page 46).
PAPER ERROR, PRESS
COPY INTERRUPTED
The Stop button has been pressed.
Or
There was a problem during copying and it could
not be printed. Check the type of problem on the
display and clear it.
42
Paper jam. Press the Stop button and, if the paper
sheet is not ejected automatically, check where it is
jammed and remove it. (See Removing jammed pages,
page 48.)
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 43
POLL. RETRY nnn
The last polling call failed. Your fax is waiting to redial
the number after nnn seconds.
Beeps
Error beeps
REMOVE DOCUMENT, PRESS
Short beep – wrong key pressed when following a set
of instructions.
A document jam has occurred. Press the Stop button
and if the page is not ejected automatically, remove
it by hand. (See Removing jammed pages, page 48.)
Long beep – unsuccessful procedure.
Or
Document scanning has been interrupted by pressing
the Stop button.
Continuous beep – handset is off-hook.
Advice beeps
Short beep – confirms fax sent or received successfully.
Beeps for 20 seconds – phone call, lift receiver to answer.
RX ERROR
An error has occurred during fax reception. Press
the Stop button to turn off the Error light and clear
the message. You may need to ask the sender to
re-send the fax.
Memory capacity
Your PaperJet 50 can store up to 21 pages of this
standard letter (reproduced A4 size).
RX IN MEMORY
A problem has occurred during reception and the
fax has continued to be received in the memory.
The bottom line of the display tells you what the
problem is. Resolve the problem and the fax will
automatically be printed.
SYSTEM ERROR nn
Your machine has locked up. Note the error code.
PaperJet Helpline is 0845 052 0052.
TX ERROR
Your last fax was not sent correctly. Press the Stop
button to turn off the Error light and clear the
message. Check the number you are sending to and
try sending your fax again.
BT PaperJet Helpline
If you cannot resolve a problem by using the Help
section, contact the Helpline on 0845 052 0052.
43
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 44
Maintenance
2 Pull the green levers towards the front of the
machine to release the printhead assembly.
Cleaning your PaperJet 50
First disconnect it from the mains power supply and
the telephone line.
3 Lift out the assembly.
Clean with a cloth dampened with diluted
washing-up liquid. Never use household polish as
this may damage your fax machine. Never use a dry
cloth as this may cause static shock.
Changing the printhead/cartridge
Your PaperJet 50 is supplied with a starter print
cartridge and it is not possible to change the ink
cartridge independently of the print head.
Replacements have ink cartridges which can be
replaced independently of the printhead. You can use
the same printhead with up to 6 cartridges. You should
then change both the cartridge and printhead.
Changing the printhead/cartridge assembly
1 Open the printer compartment cover.
44
4 Remove the new printhead assembly from its
packaging. Holding it by the finger grip, peel the
protective film from the print nozzles.
5 Avoid touching the nozzles and metal electrical
contacts.
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 45
6 Insert the new assembly into the holder with the
electrical contacts facing towards the front of the
machine.
2 Gently pull the black lever at the side of the
printhead assembly to the side to release the
cartridge.
7 Pull the assembly towards the front of the machine
until you hear it click into position.
3 Lift out the cartridge.
4 Remove the new cartridge from its packaging.
Holding it by the finger grip, peel off the
protective film.
8 Close the cover.
Changing the ink cartridge
1 Open the printer compartment cover.
5 Insert the new cartridge into the printhead until
it clicks into place.
NOTE
It is recommended that the printhead is changed
after every six cartridges.
It should be orientated as shown on next page.
45
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 46
Manually cleaning the printhead contacts
Lift the printer compartment cover.
FRONT OF MACHINE
Remove the print cartridge and head.
6 Close the cover
To clean the print head and nozzles
If the printing quality deteriorates you can
quickly clear the print head and test the
nozzles with a print-out showing their
condition.
Function
F
Use a slightly damp cloth to clean the electrical
contacts taking care not to touch the nozzles.
Press the Function button until the display
shows HEAD MAINTENANCE
Display shows NEW HEAD: ON
Start
Either
Start
If the print head is new, press the Start
button. Your PaperJet 50 performs a print
test.
Use a slightly damp cloth to clean the electrical
contacts of the carriage inside the machine.
Or
Volume
If the print head is not new, press to display
NEW HEAD: OFF
Start
Display shows CLEANING: ON
Your machine performs a print test.
Start
To cancel, press the Stop button.
Replace the print head and cartridge.
Stop
To interpret the print test, see page 12.
If the printout shows NOZZLE DAMAGED
then you should clean the printhead
contacts, see opposite.
46
Close the cover.
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 47
Cleaning the print head pad
Cleaning the optical scanner
Lift the printer compartment cover.
Dust or dirt on the optical glass may cause scanning
problems such as vertical lines on a received fax or
copied document.
Move the print cartridge to the right hand side of
the machine.
If after cleaning, you still get vertical streaks on
printed documents, contact your service engineer.
NOTE
Clean excess ink off the print head pad with a dry
cotton swab.
Switch your machine off at the mains.
Lift the printer compartment cover.
Move the print head to the left hand side of the
machine.
Close the cover.
Lift the hinged metal plate using the lever located on
the right hand side of the machine.
Clean the optical scanner with a cloth dampened
with a product specially designed for cleaning glass.
Then carefully wipe it dry. Do not pour or spray
cleaning fluid directly onto the glass.
Lower the hinged plate and close the printer
compartment cover.
47
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 48
Removing jammed pages
If a document or sheet of paper becomes jammed
while sending a fax or during copying the display
shows REMOVE DOCUMENT, PRESS
If paper used to print received faxes or photocopies
becomes jammed the display shows PAPER ERROR,
PRESS
First try ejecting the paper by pressing the Stop
button.
If the paper does not come out automatically:
Remove any paper still in the feeders.
Lift the printer compartment cover.
Press down the green lever on the left hand side of
the machine and remove the jammed paper.
48
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 49
Technical information
PaperJet 50
Model ......................................................Desktop transceiver
Display ....................................................LCD 16 + 16 characters.
Memory capacity* .....................................21 pages
Dimensions
Width ......................................................359mm
Depth ......................................................234 + 84mm (with paper support extension)
Height .....................................................180mm + 138mm (with paper support extension)
Weight.....................................................4.5kg
Communication features
Telephone network.....................................Public/private
Compatibility ............................................ITU
Communication speed ................................9600-7200-4800-2400bps
Compression method .................................MH, MR
Power features
Power supply.............................................220-240 VAC, 50-60Hz
Power consumption....................................7W standby, 35vv max
Optical scanner features
Scanning method.......................................CIS
Reading resolution .....................................
horizontal ............................8 pixel/mm
vertical STANDARD ...............3.85 lines/mm
vertical FINE ........................7.7 lines/mm
Transmission features
Transmission time ......................................15s (9600bps)
Automatic document feeder ........................5 sheets A4, Letter and Legal
49
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:20 am PaperJet
Page 50
Reception features
Printing method . . . . . . . . . . . . . . . . . . . . . Printing on plain paper with ink jet printer
Max. printing width . . . . . . . . . . . . . . . . . . . 208mm
Printing paper . . . . . . . . . . . . . . . . . . . . . . . A4 (210 x 297mm), Letter and Legal
US Letter (216 x 279mm) and US Legal (216 x 356mm)
Weight 70-90gsm
Paper feed . . . . . . . . . . . . . . . . . . . . . . . . . Plain paper cassette 40 sheets, 80gsm)
Environmental conditions . . . . . . . . . . . . . . . from 5°C to +35°C (operating)
from –15°C to +45°C (transport)
from 0°C to +45°C (storage and parking)
Relative humidity. . . . . . . . . . . . . . . . . . . . . 15%-85% (operating, storage, parking)
5%-95% (transport)
*ITU TS format, Test Sheet No.1 (Slerexe Letter) in standard resolution with MH compression.
R&TTE
This product is intended to be connected to analogue
networks and private switching systems in the United Kingdom.
This product complies with the essential requirements of the
Radio and Telecommunications Terminal
Equipment Directive 1995/5/EC.
50
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:21 am PaperJet
Page 51
Index
Activity report
24
Alert beeps
31
Answering machine – connecting
35
Broadcast a document
19
Calls
dial one-touch number
make
on hold
number of rings
speed dial
Change
cartridge
printhead
27
26
27
30
27
44
44
Cleaning
44, 46
Contrast
15
Copying documents
copy a document
stop copying
28
28
Date
13
Delayed faxing
18
Document retransmission on/off
17
Enter
fax number
name
13
13
Error codes
41
Error messages
42
Extension telephone
change remote start code
receiving a fax call
31
31
ECM mode on/off
33
Fax
contrast and resolution
delayed faxing
dial and hear progress
dial using handset
enter name and number
from memory
header
receiving
redial
send
stored
tones on/off
15
18
16
17
13
19
14
20
17
15-16
19
32
Handset
connect
9
Help
39
Ink cartridge
44
Lists
configuration
one-touch
26
26
set-up
26
speed dial
26
Load paper
10
51
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:21 am PaperJet
Page 52
Make a call
Memory
capacity
fax from
Number of rings
26
43
19
30
One-touch memories
delete
edit
send
store
22
22
22
21
Paper
check size
jammed
load
type/size
11
48
10
15
Polling
cancel
change time and number
from another fax
set by another fax machine
34
34
33
34
Power
10
Power failure
39
Pre-set fax
change details
send
18
18
Print area
29
Print head
Print quality
set
test
52
17
17
Reports
activity
automatic printing
delayed transmission
broadcasting
transmission
power failure
request print-outs
24
25
24
24
24
24
25
Resolution
15
Ringer volume
30
Safety
8
Setting up
9
Send
fax
fax at pre-set time
15
18
Set
contrast and resolution
date
time
15
13
13
Speed dial call
27
Speed dial memories
delete
edit
send
store
23
23
23
22
44
Speed fax sent
Starter print cartridge
32
11
29
12
Switchboard
set access number
set dial mode
switch dialling mode
37
37
38
Receiving
document longer than paper size
faxes
Redial
automatic re-dialling
last number
30
20
PaperJet 50 User Guide
26/7/01
Technical information
Telephone line cord
50 user guide – Edition 3 – 29.8.00
10:21 am PaperJet
Page 53
49
9
Time
13
Tones on/off
32
Volume
buzzer
loudspeaker
ringer
32
32
30
53
PaperJet 50 User Guide
26/7/01
50 user guide – Edition 3 – 29.8.00
10:21 am PaperJet
Page 54
Offices worldwide
The telecommunications services described in this publication
are subject to availability and may be modified from time to time.
Services and equipment are provided subject to British
Telecommunications plc’s respective standard conditions of contract.
Nothing in this publication forms any part of any contract.
TouchtoneTM is a registered trade mark of
British Telecommunications plc in the UK.
© British Telecommunications plc 2000.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
PaperJet 50 user guide (8/00) 3
Designed by The Art & Design Partnership Limited.
Printed in Thailand.
Printed on paper which meets international environmental standards.
Download PDF

advertising