INSTALLATION AND OPERATION INSTRUCTIONS 18” SHALLOW DEPTH SERIES

INSTALLATION AND OPERATION INSTRUCTIONS 18” SHALLOW DEPTH SERIES
INSTALLATION AND OPERATION INSTRUCTIONS
18” SHALLOW DEPTH SERIES
Table of Contents
Introduction................................................................. 1
Preparing the cabinet for use
General Precautions................................................... 2
Installation Notes........................................................ 2
Dimensions Diagram.................................................. 3
Preparing the Space................................................... 4
Preparing Electrical Connections............................... 4
Unpacking/Moving the Unit........................................ 5
Anti-tip Bracket Information........................................ 5
Congratulations on your purchase of a Perlick residential
refrigeration product. Celebrating over 90 years of
excellence, Perlick is the industry leader in commercial
refrigeration systems. Today, Perlick has taken its
expertise and experience into creating the highest quality
and most innovative residential products on the market.
Perlick’s product offering gives you the opportunity to
enjoy the functionality and user friendliness in just about
any room of your home, including kitchens, bedrooms,
entertainment rooms, basements and even bathrooms. All
Perlick products are built with commercial-grade stainless
steel – providing you with the beauty and durability for a
lifetime of use.
This Installation and Operation manual will answer your
questions about the features, operation and maintenance
of your Perlick unit. If you have questions that are not
addressed here, please call 800/558-5592.
IMPORTANT: Please read all instructions completely be-
Installation
Installation Instructions............................................... 6
Shelving...................................................................... 8
Door Panel Options.................................................... 8
Door Lock Installation................................................. 9
Operation.................................................................. 10
Maintenance............................................................. 11
Troubleshooting........................................................ 12
Warranty Information................................................ 14
WARRANTY REGISTRATION
To request information or service, the model number
and serial number must be provided. This information
is located on the inside ceiling of the unit and on the
warranty registration card included with information
packet shipped with the unit.
IMPORTANT: Read through the included warranty
statement then complete and mail the Warranty
Registration Card as soon as possible to validate the
registration date. Warranty registration can also be
done online at www.bringperlickhome.com. If warranty
registration is not completed, Perlick will use the date
of sale as the first date of warranty for the unit. Please
record the purchase date of the unit and dealer’s
name, address and telephone number below.
Model Number_________________________________________
Serial Number_________________________________________
fore attempting to install or operate the unit. Take note of
DANGER, CAUTION and WARNING when they appear in
the manual. This information is important for the safe and
efficient installation, operation and care of your Perlick
unit.
Purchase Date ________________________________________
DANGER indicates a hazard that will result in serious
injury or death if precautions are not followed.
Dealer Phone Number __________________________________
WARNING indicates a hazard may cause serious
injury or death if precautions are not followed.
CAUTION indicates a hazard where minor injury
or product damage may occur if you do not follow
instructions.
Dealer Name _ ________________________________________
Dealer Address ________________________________________
Retain this manual along with the sales receipt for
future reference.
C
US
8300 West Good Hope Road • Milwaukee, WI 53223 •
Toll Free 800.558.5592 • Fax 414.353.7069 • www.bringperlickhome.com
Form No. Z2326
Rev. 03.01.2011
18” SHALLOW DEPTH SERIES
Operation / Installation Manual
GENERAL PRECAUTIONS
DANGER
CAUTION
1.Risk of child entrapment. Before you throw 1.Do not lift unit by shelves or door handle.
away your old unit, take off the doors and 2.Failure to clean the condenser every three
leave shelves in place so children may not
months can cause the unit to malfunction.
easily climb inside.
This could void the warranty.
2.Altering or cutting of the power cord, or 3.Never install the unit behind closed doors (ie:
removal of the power plug, or direct wiring
closets, small, etc). Be sure front louvered
can cause serious injury, fire and/or loss
toe plate is free of obstruction. Obstructing
of property and/or life and will void the
free air flow can cause unit to malfunction
warranty.
and may void the warranty.
4.Use only Perlick replacement parts. Imitation
WARNING
parts can damage the unit, and may void the
1.Never attempt to repair or perform
warranty.
maintenance on the unit until the electricity
has been disconnected.
2.The anti-tip kit must be installed on this unit
before it is used. Never use the shelves or
doors as steps or to support more than they
are designed to support.
INSTALLATION INSTRUCTIONS
FINISHED ROUGH OPENING REQUIREMENTS
GENERAL
1.All electrical instructions assume that outlet is
located 4-10 inches from the floor.
1.Height:
2.Floor must be level in area of installation. Leg 2.Depth:
levelers are used for fine-tune adjustment only
and should not be used to compensate for floor 3.Width:
differences exceeding 1/2”.
3.When moving unit into position, take care to
protect floor surface with cardboard, rugs, etc
(see page 4).
4.Never attempt to move unit without aid of at
least one other person.
5.Always secure doors shut prior to moving the
unit.
32-1/2”
18”
24”
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice
2
18” SHALLOW DEPTH SERIES
Operation / Installation Manual
Figure 1. Dimensions
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice
3
18” SHALLOW DEPTH SERIES
Operation / Installation Manual
PREPARING THE SPACE
DANGER
ELECTROCUTION
HAZARD!
Make sure the installation opening is properly
prepared. Refer to Figure 1 (page 3) for space Electrical grounding required. This appliance
is equipped with a 3-prong (grounding)
dimensions.
polarized plug for protection against possible
CAUTION
shock hazards.
If unit is to be installed under a countertop, 1.Never remove the round grounding prong
from the plug.
it is recommended that the countertop be
2.Never
use a 2-prong grounding adapter.
supported by a structure other than the unit
3.Never use an extension cord to connect
itself, to prevent damage to the countertop.
power to the unit.
IMPORTANT: For a cabinet door to operate
properly, the door must be open a minimum of If a 2-prong wall receptacle is encountered,
94° (see Figure 1). Use a minimum 2-7/8” filler in or a longer power cord is required, contact
corner installations to ensure a 94° opening. Allow a qualified electrician to install the proper
enough clearance in front of the unit for full door 3-prong receptacle in accordance with
applicable electrical codes.
swing or shelf pull-out.
DANGER
IMPORTANT: Make sure floor under unit is level
with the surrounding finished floor. Protect finished Failure to comply with the above electrical
floor with plywood, rugs, cardboard or some other guidelines may result in possible injury/death/
suitable material before moving the unit into place. fire or loss of property.
Failure to do this may result in damage to the floor.
PREPARING ELECTRICAL
CONNECTIONS
A 115 volt, 60Hz, 15 amp circuit breaker and
electrical supply are required. A separate circuit is
recommended.
Recessed
Panel
Follow the National Electrical Code along with
local codes and ordinances when installing the
receptacle.
All Perlick units come equipped with a NEMA
5-15P, 90° plug with a 5’ cord (minimum) extending
beyond the rear of the unit. The electrical outlet
must be flush with, or recessed into, the back wall
or located where that recess is on the back of the
cabinet (Figure 2).
Figure 2. Electrical Connections
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice
4
18” SHALLOW DEPTH SERIES
Operation / Installation Manual
UNPACKING AND MOVING THE UNIT
ANTI-TIP BRACKETS
CAUTION
Do not cut cardboard sleeve covering the unit.
Cutting may result in damage to the exterior of
the unit.
1.Uncrate the unit on a flat level surface. Remove
the cardboard sleeve by removing the banding
holding the sleeve to the shipping base.
Carefully lift the cardboard sleeve up over the
top of the cabinet.
2.Carefully lift unit off base onto a hand truck or
dolly (this should be done with a minimum of two
people, larger cabinets may require additional
helpers). Make sure unit it is balanced on
transporting device. Secure unit to transporting
device using soft flexible strapping. Protect
cabinet surfaces with cloth material where
strapping contacts the unit.
3.Before moving unit, secure door to unit with
tape to hold the door closed.
WARNING
Unit may tip forward if loaded racks/shelves
are all pulled out at the same time. To prevent
tipping and provide a stable installation, the
unit must be secured in place with the anti-tip
brackets provided with the unit.
A set of metal anti-tip brackets are supplied with the
unit. The anti-tip brackets, when properly installed,
should secure the rear legs and prevent the unit
from tipping forward. Select fasteners based on
the material the brackets will be fastened to.
Some installation sites may require modification
to provide a secure surface for attaching the
brackets. Refer to Figure 3 for mounting bracket
locations.
IMPORTANT: If installing on a concrete floor,
concrete fastners are required and are not included
in the Anti-Tip Kit.
Figure 3. Installing Anti-tip Brackets
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice
5
18” SHALLOW DEPTH SERIES
Operation / Installation Manual
Figure 4. Wall Bracket
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice
6
18” SHALLOW DEPTH SERIES
Operation / Installation Manual
INSTALLATION
IMPORTANT: Leveling legs should not extend
CAUTION
more
than 3/4” from bottom of unit.
Finished flooring should be protected with
appropriate material to avoid damage from
4.Slide unit into position. Make sure the rear
moving the unit.
levelling legs slide under the anti-tip brackets.
Push the unit into the opening until the door is
If unit is built into cabinetry, allow clearance for
flush with the surrounding cabinetry, or until the
unit to be removed from opening for potential
rear legs are tight against the anti-tip brackets.
future service requirements.
If unit has been laid on its back or sides, place IMPORTANT: The rear levelling legs must be
unit upright and allow minimum of 24 hours engaged under the anti-tip brackets..
before connecting power.
5.Shim the front of the unit so the front door is
flush with the surrounding cabinetry. Adjust
1.Plug the unit into the 15 amp grounded outlet
the front legs to support the countertop at
located in the installation opening. With power
the shimmed height. Using an adjustable
applied to the unit, check that lighting and
wrench or pliers, turn legs counterclockwise
cooling function operate properly, then turn off
to raise the unit or clockwise to lower the unit.
power to the wall outlet at the circuit breaker.
Countertop should be resting on top of the unit..
WARNING
IMPORTANT: The rear levelling legs must be
Shut off power to the wall outlet before
engaged under the anti-tip brackets..
installing unit into the opening.
.
CAUTION
2.Check that the following are level and square:.
To
prevent
damage
to the countertop and
- front face and interior opening.
unit underneath, do not place heavy objects
- installation opening and floor surface.
on countertop directly above the unit.
- countertop bottom front edge.
6.Check interior door openings inside unit to
ensure unit is level.
IMPORTANT: The floor under the unit must be at
the same level as the surrounding finished floor.
3.If all surfaces are level, refer to Figure 3 and
perform the following:.
A.Measure from the floor to the bottom of the
front edge of the countertop..
B.Measure the rear of unit cabinet from floor to
top of cabinet, at back corners..
C.Adjust rear legs so B measurement equals A
measurement. Using an adjustable wrench
or pliers, turn legs counterclockwise to raise
the unit or clockwise to lower the unit.
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice
7
18” SHALLOW DEPTH SERIES
Operation / Installation Manual
SHELVING
DOOR PANEL OPTIONS
IMPORTANT: To achieve maximum performance,
interior louver openings and fan guard should
never be obstructed.
Perlick residential units offer a variety of door
panel design alternatives; solid stainless steel,
solid wood overlay, stainless steel glass and wood
overlay glass.
Refrigerator
The single door unit comes standard with two Solid stainless steel and stainless steel glass
black vinyl coated adjustable full extension pullout doors are shipped from the factory with decorative
shelves.
stainless steel panels and handles in place on the
appliance.If optional door lock is ordered, the unit
Wine Reserve
comes pre-assembled from the factory.
The single door unit comes standard with four full
extension black vinyl coated wine racks capable Solid wood overlay and glass wood overlay doors
of storing 20 standard wine bottles. Shelves are are designed to accept a decorative front panel to
removable and/or adjustable. At the bottom, up to match surrounding cabinetry and door handles.
(2) 1.5L bottles can be stored.
The panel and door handles are supplied by the
customer. If ordered with the optional door lock,
Beverage Center
see Figure 6. Door Lock Installation on page 9.
The single door unit comes standard with two
full extension black vinyl coated wine racks and IMPORTANT: Glass with stainless trim and glass
one industry exclusive full extension pullout shelf with wood trim may sweat in conditions with relative
allowing for storage of both wine and beverages, humidity over 75%.
Shelving positions are adjustable.
ADJUSTING FULL EXTENSION SHELVING
1.Pull the shelf out to its farthest position. Locate
the tabs in the middle of both extends (Figure
5). Press tabs and pull shelf out..
2.Reposition each bracket separately. Grasp the
middle of the bracket, pull the front end up and
out, then forward to remove (Figure 5).
Press tabs and pull shelf out
3.Place bracket at the desired position. Push
the rear hook into the rear key slot. Set front of
bracket on the wall hook..
Lift this end up
4.Repeat for other bracket(s)..
5.Push extenders completely into the unit. Align
the shelf grooves with the extenders and slide
completely into the unit.
Figure 5. Adjusting the Shelving
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice
8
18” SHALLOW DEPTH SERIES
Operation / Installation Manual
Figure 6. Door Lock Installation
Bracket
Nut
Lock Strike
Lock
Bracket
Lock Washer
Lock
Body
Screw
1.Attach bracket to wood overlay
2.Insert lock body
3.Add and tighten nut
4.Add lock strike
5.Add lock washer and screw
6.Use key to turn the lock and verify that the lock and unlock positions of the strike are correct
Lock
(unlock should be up) (lock should
be horizontal)
Bracket
7.Adjust lock if necessary
8.Attached overlay with lock assembly to the door assembly
9.Attach lock bracket to unit
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice
9
18” SHALLOW DEPTH SERIES
Operation / Installation Manual
OPERATION
Temperature Control
The controller is located at the top rear panel of
General
The unit is equipped with a state-of-the-art the cabinet (Figure 7). Approximate temperature
refrigeration system and is a frost-free model. The operating ranges are:
evaporator coil automatically defrosts on demand
■■ Refrigerator: 33°F minimum, 39°F maximum.
during off cycle.
Interior Light
The unit is equipped with an interior light that
illuminates when the door is opened. A manual
switch is located next to light for displaying the
product through a glass door. Always ensure the
manual switch is in the off position before closing a
solid wood or stainless steel door. If manual switch
is left on for an extended period of time, it may
increase the cabinet temperature, especially at
the top, and cause the refrigeration system to run
longer.
■■ Wine Reserve: 40°F minimum, 65°F maximum.
■■ Beverage Center: 36°F minimum, 48°F maximum
Adjusting the Temperature
■■ Colder Temperature: Turn the adjusting screw
clockwise (to the right).
■■ Warmer Temperatures: Turn the adjusting
screw counterclockwise (to the left).
■■ Temperature Control “OFF”: Turn the adjusting
screw completely counterclockwise to the
“OFF” position until a click is heard..
The condenser fan and motor turns off and on with
the compressor.
When loading items into unit, do not block intergal
louvers and fan guard openings or performance
will be decreased.
4
COO
LE
R
Loading Product
IMPORTANT: Before storing perishables, allow
unit to run for a minimum of 24 hours to allow
temperature stabilization after start-up.
5
3
6
2
1
OFF
COLD
Figure 7. Control Panel
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice
10
18” SHALLOW DEPTH SERIES
Operation / Installation Manual
Checking Product Temperature
To accurately check the temperature of the product
stored in a refrigerated compartment, insert an
accurate thermometer into a sealable plastic (nonbreakable) bottle, partially filled with water. Tighten
the cap securely.
MAINTENANCE
WARNING
Shut off the electricity to the unit before
cleaning the condenser and other routine
maintenance.
Cleaning
Place the bottle into the desired area for 24 hours. To clean stainless steel exterior or interior surfaces,
Refrain from opening the unit during testing period. use a soft, non-abrasive stainless steel cleaner to
After 24 hours, check the temperature of the water. wipe down the surfaces.
Adjust the control settings if necessary and re-test.
Glass doors can be cleaned using any standard
The units are pre-set to achieve the recommended glass cleaner available on the market.
temperature range when installed in a 70°F
ambient environment. Factors which affect the To clean interior non-metallic surfaces and
internal temperatures of the cabinet include the removable parts, wash with a mild solution of
following:
soap and lukewarm water with a little baking soda.
Rinse and dry thoroughly. Avoid getting water on
■■ Temperature setting.
lights, control panel, and fan motor.
■■ Room temperature where installed.
■■ Number of times the door is opened and
CAUTION
closed.
Do not use abrasive cleaners or cloths on any
of the interior or exterior surfaces or removable
■■ Length of time door is left opened.
parts.
■■ Adjacent compartment temperature.
■■ Style of door installed.
■■ Door gasket and sealing.
■■ Amount of time internal light is illuminated.
■■ Installation in direct sunlight or near a heat
source.
Cleaning the Condenser
The condenser should be cleaned every three months. The condenser is located behind the toe
plate. Remove the toe plate and use a soft bristle
brush and vacuum to remove dust and lint. Avoid
damaging or crushing the condenser fins or tubing.
Upon completion, re-install the toe plate.
CAUTION
Failure to clean the condenser could result in
temperature loss or mechanical failure. Clean
this area every three months.
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice
11
18” SHALLOW DEPTH SERIES
Operation / Installation Manual
TROUBLESHOOTING
If the unit appears to be malfunctioning, read through the OPERATION section first, then check the
guide below to identify and resolve the problem.
DANGER
Electrocution hazard! Never attempt to repair or perform maintenance on the unit until the main
electrical power has been disconnected.
No interior light
■■ Is the bulb loose?
■■ Is the bulb burned out?.
Light stays on when the door is closed
■■ Manual ON/OFF light switch is turned on.
■■ Is the door switch making contact with the plunger?
Noisy during operation
■■ Certain sounds are normal. Soft sounds from the compressor, fan motor and valves will be heard.
The refrigerated cabinet isn’t running
■■ Is there electrical power to the unit?
■■ Is the building circuit breaker/fuse on?
■■ Is the control set properly?
■■ Is the condenser area clean?
The refrigerated compartment is warmer than usual
■■ Is the control set properly?
■■ Is the light staying on?
■■ Is the condenser area clean and free of obstruction?
■■ Has the door been open for a long time or more frequent door openings occurred?
■■ Are the internal louvers and fan guard openings obstructed?
The refrigerated compartment is cooler than usual
■■ Is the control set properly?
■■ Is the door closing and sealing properly?.
The refrigeration runs for long periods of time
■■ Is the condenser area clean and free of obstruction?
■■ Has the door been open for a long period of time or more frequent door openings occurred?
■■ Has warm product just been placed in the unit?
■■ On hot days and in warm room temperatures, the system will run longer..
Condensation forms inside the refrigerated compartments
■■ This is normal during high humidity and frequent door openings.
■■ Are the doors closing and sealing properly?
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice
12
18” SHALLOW DEPTH SERIES
Operation / Installation Manual
Condensation forms on the outside of the unit
■■ During periods of high humidity, some condensation might appear on the outside surface. The
condensation will disappear when the humidity drops. Meanwhile, be sure doors are closing and
sealing properly. If condensation persists, contact your Perlick Factory Authorized Service Center..
To obtain product information
■■ Contact your selling dealer.
■■ Inquire on the web at www.perlick.com.
■■ Call 800/558-5592 for factory assistance for planning, installation or product information..
■■ Write Perlick Corporation, Customer Service Department, .
8300 W. Good Hope Rd., Milwaukee, WI 53223.
■■ E-mail us at warrantyserv@perlick.com
To obtain product service, replacement parts or accessories
■■ Use only genuine Perlick replace parts and accessories. Genuine Perlick parts and accessories
are designed to work correctly with Perlick products and offer superior service life. The use of nonPerlick parts can damage the unit and may void the warranty..
■■ Check the model and serial number of the unit located on the label attached to the inside top
of the cabinet. Call a Perlick Factory Authorized Service Center. For the location of the nearest
Service Center, contact your dealer, or inquire via the web at www.perlick.com, or write to: Perlick
Corporation, Customer Service Department, 8300 W. Good Hope Rd., Milwaukee, WI 53223
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice
13
18” SHALLOW DEPTH SERIES
Operation / Installation Manual
PERLICK HOME REFRIGERATION PRODUCTS LIMITED WARRANTY
ENTIRE PRODUCT - Full One Year Warranty
For one year from the date of original installation, Perlick Corporation’s warranty covers all parts
and labor to repair or replace any part of the product, which proves to be defective in material and
workmanship.
Additional - Second through Sixth Year Limited Parts Only Warranty:
During the five years following expiration of the One Year Warranty, Perlick will supply replacement
parts only for the hermetically sealed refrigeration system which consist of the compressor, condenser,
drier, connecting tubing, evaporator, and hot gas bypass valve.
TERM:
The Perlick Warranty applies to products installed in the fifty United States, the District of Columbia or the ten provinces of
Canada.
All service provided by Perlick Corporation under the above warranty must be performed by authorized Perlick service
representatives, unless otherwise specified by Perlick.
Service will be provided in the home during normal business hours.
This warranty applies only to products installed for normal residential use, it does not include adjusting the controls, door
reversal, light bulb or cleaning the condenser.
The above warranty does not apply if:
■■ Failure of product was due to transportation
■■ Product was: improperly installed, misused, abused, operating with low voltage, wiring not conforming to electrical
codes, improperly maintained or modified.
■■ The original Bill of Sale, delivery date or serial number cannot be verified.
■■ Defective parts are not returned for inspection if so required by the Perlick Corporation.
To receive parts and/or service and the name of the nearest Perlick authorized service representative, contact your Perlick
dealer, distributor or Perlick Corporation’s Customer Service Department; 8300 West Good Hope Road, Milwaukee,
Wisconsin 53223; call 800/777-7267, E-mail us at customerserv@perlick.com, or visit our website www.perlick.com.
This limited warranty is in lieu of any other warranty, expressed or implied, including, but not limited to any implied warranty
of merchantibility or fitness for a particular purpose; provided however, that to the extent required by law, implied warranties
are included but do not extend beyond the duration of the express warranty first set above. Perlick’s sole liability and your
exclusive remedy under this warranty are set forth in the initial paragraph above. Perlick Corporation shall have no liability
whatsoever for any incidental, consequential or special damages arising from the sale, use or installation of the product or
from any other causes whatsoever, whether based on warranty (expressed or implied) or otherwise based on contract, tort
or any other theory of liability. In no event shall the user be entitled to recover incidental or consequential damages.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or
consequential damages, so the above limitations do not apply to you. This warranty gives you specific legal rights, and you
may also have other nights, which vary, from state to state.
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice
14
NOTES
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice
15
Form No. Z2326
Rev. 03.01.2011
8300 West Good Hope Road • Milwaukee, WI 53223 •
Toll Free 800.558.5592 • Fax 414.353.7069 • www.bringperlickhome.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising