Garland G24-24G General Manual

Item #:______________________________

Models: All G24 Series

Product Name: Heavy-Duty Griddles

Griddle Features:

• Stainless steel front - remainder black

• Full spatula width front grease trough

• Large grease bucket holds 1-3/4 gallons (7.9 liters)

• 3/4" (19mm) polished steel plate griddle w/2-5/8"

(67mm) welded splash guards on both sides and rear

• 24" (610mm) deep grilling surface

• Available with thermostats or Hi-Lo Valves

• Chrome plated thermostat guards

• 33,333 BTU for every 12" of griddle width

• 5 griddle widths Available - 24" (610mm) through

72" (1829mm)

Optional Features:

❑ Stainless steel sides

❑ Grooved griddle plate (in 12" sections)

Model G24-36TH

(shown mounted on CS24-36 stand)

Specifi cation:

Heavy duty gas griddles available in fi ve (5) widths;

24", 36", 48", 60", and 72". High performance, high volume production with even, consistent, controlled temperatures. 3/4" (19mm) thick griddle plate.

Garland has designed this heavy-duty griddle to give you the features required for high-volume operations. Individual thermostats for each foot of griddle width and maximum heat input per square inch of grilling surface. Th e heavyduty thermostat system and superior burner design ensures a griddle with a completely even heat pattern, accurate temperature control and recovery that can’t be killed.

Optional CS24 Series Stands:

Floor Stands: Heavy-duty stands of open design with seamless welded square tube legs. Black finish Storage shelf supplied with stands up to 48" (1219mm) wide.

Working height of all units on stands 35-1/2" (902mm)

Stand widths available in 15" (381 mm), 24" (610mm), 30"

(762mm), 36" (914mm), 48" (1219 mm), 60" (1524mm) and 72" (1829mm). Example for G24-36G griddle, specify compatible CS24-36 stand. For stainless steel finish, add

SS suffix to model number.

Optional:

❏ Swivel casters; set of 4

Garland Commercial Industries, Inc.

185 East South Street

Freeland, Pennsylvania 18224

Phone: (570) 636-1000

Fax: (570) 636-3903

Garland Commercial Ranges Ltd

1177 Kamato Road, Mississauga, Ontario

L4W 1X4 CANADA

Phone: 905-624-0260

Fax: 905-624-5669

Enodis UK LTD

Swallowfi eld Way, Hayes, Middlesex

UB3 1DQ ENGLAND

Telephone: 081-561-0433

Fax: 081-848-0041

Item #:______________________________

Models: All G24 Series

Product Name: Heavy-Duty Griddles

Model

Input Chart Natural Gas

Description Controls

G24-24G

G24-24GTH

G24-36G

G24-36GTH

G24-48G

G24-48GTH

G24-60G

G24-60GTH

G24-72G

G24-72GTH

24” (610mm)

Griddle

36” (914mm)

Griddle

48” (1219mm)

Griddle

60” (1524mm)

Griddle

72” (1829mm)

Griddle

2 Hi-lo Valves

2 Thermostats

3 Hi-lo Valves

3 Thermostats

4 Hi-lo Valves

4 Thermostats

5 Hi-lo Valves

5 Thermostats

6 Hi-lo Valves

6 Thermostats

BTU/HR

66.500

Griddle Production Capacities

Meat Patties

3 Oz. (85 g)

350° F (177°C)

Fried Eggs

300°F(149°C)

Pancakes

4” Dia. (102mm)

Minute Steaks

4oz(112g)

350° F (177° C)

Per Load Hourly Per Load Hourly Per Load Hourly

33 165 27 540 27 135

100,000

133.000

166,500

200,000

50

67

83

100

250

335

415

500

40

53

67

80

800

1060

1340

1600

40

53

67

80

200

265

335

400

Manifold Operation Pressure

Normal Supply Pressures

Natural Gas

4” WC (10 mbar)

Propane

10” WC (14 mbar)

Note: For use with Natural & L.P Gas only

Installation Notes

Combustible Wall Clearances: In (mm) Ratings shown are for natural gas

Sides

6(152)

Back

6(152)

Base

Non-combustible installations up to 2000 feet (610m) above sea level. BTU input ratings

NOTE: Installation clearance reductions are applicable only where local codes permit must be de-rated for high altitude installations. Specify altitude of product if over 2000 feet (610m)

4-9/16"

(116mm)

W

3/4" NPT GAS INLET (G24-24, G24-36)

1" NPT GAS INLET (G24-48, G24-60, G24-72)

Model W

1-1/2"

(38mm)

G24-24G

G24-24GTH

G24-36G

G24-36GTH

G24-48G

G24-48GTH

G24-60G

G24-60GTH

G24-72G

G24-72GTH

24” (610mm)

36” (914mm)

48” (1219mm)

60” (1524mm)

72” (1829mm)

11-1/8"

(283mm)

1-7/8"

(48mm)

13-1/4"

(337mm)

Printed in USA

30-3/4"

(781mm)

3/4" NPT GAS INLET (G24-24, G24-36)

1" NPT GAS INLET (G24-48, G24-60, G24-72)

Continuous product improvement is a Garland policy.

Specifications and design are subject to change without notice.

Form #G24 (02/07)