Randell 51397LPPO, 51380LPPO, 51350LPPO, 51355LPPO, 51372LPPO, 51375LPPO, 51342LPPO, 51385LPPO, 51367LPPO null

Randell 51397LPPO, 51380LPPO, 51350LPPO, 51355LPPO, 51372LPPO, 51375LPPO, 51342LPPO, 51385LPPO, 51367LPPO null
Custom SC Refrigerated Storage models 51000LPPO
model
51342LPPO
51380LPPO
51350LPPO
51385LPPO
51355LPPO
51397LPPO
Description:
Self-Contained drawer base refrigerator storage units with mechanically
cooled pan opening. These units are offered in variety of lengths to meet
your specific base storage or pan storage requirements. The mechanically
cooled pan opening uses Randell’s exclusive design technologies, such as
our Exclusive Refrigerated Pan Opening Thermostat allowing customers
to make adjustments to the opening temperatures (independent of the
base). Automatic hot gas evaporator is provided for eliminating the base
coil’s condensation. The base is designed with a “low-profile” cabinet and
is supplied with a plate shelf above the refrigerated openings.
51367LPPO
51372LPPO
51375LPPO
model 51375LPPO shown with:
•optional finished end
•pan covers removed
•standard backsplash removed
These units feature our Patented Drawer Cartridge Assembly.
A fully welded, unitized drawer cartridge assembly with a quick release
that allows the refrigerated drawers to be easily removed for cleaning.
This equipment is intended for use in rooms having an ambient temperature of 86˚F (30˚C) or less.
Specifications:
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 1/2" nosing. Backsplash to be coved cornered,
with 45˚ return at top and overall height of 6 3/4". Ends at top fitted with
recessed heavy duty steel bars for field bolting units together, producing
a hairline seam. Hinged louver panel to be stainless steel. Exterior body
to be corrosion resistant steel. Door opening frames are ABS and contain
magnetic strip for positive seal of door gaskets. Work surface to be at
36" work height. Legs to be 6" high stainless steel with adjustable
bullet foot. Legs mounted to full length channel frame assembly which
is integrally welded to bottom of body assembly. Legs can be moved left
to right to avoid floor obstacles during installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at ends only.
Stainless steel interior liner to be coved cornered to form bottom, back
and top. One baked enamel finished shelf provided behind each door.
Unit insulation to be CFC free foamed in place urethane.
REFRIGERATED DRAWERS: Fully welded, unitized drawer cartridge
assembly - patented. Heavy duty full extension 14 gauge drawer tracks
on 1 5/8" heavy duty stainless steel bearings. Will accommodate (2)
12" x 20" x 4" deep pans per drawer (pans not included). Quick release
allows drawers to be easily removed for cleaning. Stainless fronts,
mounted to drawer cartridge assembly with easy to grasp drawer
handles. Drawers are self-closing with press fit magnetic gaskets (designed for installation & removal without tools).
REFRIGERATION: System is a balanced heavy duty R-404A refrigerant
system with an energy efficient automatic defrost (for base evaporator
coil). The base is cooled by an independent blower coiled operating on its
own expansion valve and thermostat and operates through a dedicated
solenoid valve. A pressure control is provided to operate the condensing
unit on demand. The pan opening is provided with its own thermostat
(located in the compressor housing) making it easily adjustable for specific
ambient conditions without effecting the balance of the system. An on/off
switch for the pan opening is located above the louver panel.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Standard Features:
• “Low-profile” refrigerated cabinet with plate shelf above
• Low profile 2" recess pan design provides easy reach and
optimal pan temperatures & reliability
• Balanced (extra) high capacity refrigeration system with expansion valve
metering-able to handle peak period demands
• Full Length Poly Cutting Board
• Front breathing compressor housing with directed air flow-Randell Exclusive
• Patented Drawer Cartridge System with easy maintenance Press-Fit gaskets
- A Randell Exclusive
• Pan opening thermostat- A Randell Exclusive
• Drain in pan opening for easy cleaning
• Hinged louver for easy access
• Hinged removable stainless steel covers
• Automatic base defrost with condensate evaporator
• Foamed in place urethane insulation providing superior insulation
and durability
• 6" high adjustable legs, moveable left to right if needed
• Available up to 16' under one common assembly
• Adapter bars are standard to accommodate a compliment of 1/6 size pans
• Front breathing louver design allows sealing to wall & curb
mounting without special requirements
Options & Accessories:
Hinged slide-back removable covers
Lift-Off (removable) night covers
Stainless Steel Ends
Stainless Steel Back
Laminate fronts, ends and back options
Casters in lieu of legs
Export voltages
Wide pan opening
33°F to 40°F
33°F to 41°F
Randell Custom, Page 17a
PP SPEC0132 Rev. B
Revised 5/09
18°F to 22°F
5100OLPP0 Series
51000LPPO SERIES (compressor left) SELF-CONTAINED DRAWER BASE REFRIGERATORS WITH STANDARD DEPTH RECESSED PAN OPENING
Length
42"
50"
55"
67"
72"
Model 33" deep 51342LPPO 51350LPPO
51355LPPO
51367LPPO
51372LPPO 51375LPPO 51380LPPO 51385LPPO 51397LPPO
# of sets of
drawers
(1) set 32"
(1) set 19"
(1) set 27"
(1) set 19" (2) sets 27" (1) set 27" (2) sets 32" (1) set 19"
(1) set 32" + 3" mullion (1) set 32" + 3" mullion (2) sets 27"
+ 3" mullion
+ 3" mullion
(1) set 19" (1) set 27"
+ 5" mullion + 5" mullion
+ 5" mullion
75"
80"
85"
97"
+ (2) 3" mullion
Total # of 12x12 (2) 12x20’s (4) 12x20’s
pans in drawer*
(4) 12x20’s
(6) 12x20’s
(6) 12x20’s (8) 12x20’s (8) 12x20’s (8) 12x20’s (10) 12x20’s
Min. Compr. Hsg. 18"
18"
18"
18"
18"
18"
18"
18"
18"
Min. # Pans
(6) 1/6
(6) 1/6
(6) 1/6
(8) 1/6
(6) 1/6
(10) 1/6
(10) 1/6
(10) 1/6
Min. Length
27”
(clear) of opening
27”
27”
27”
34”
41”
41”
41”
41”
Max. # Pans
(12) 1/6”
(12) 1/6”
(16) 1/6”
(16) 1/6”
(16) 1/6”
(18) 1/6”
(20) 1/6”
(24) 1/6”
10" wide
10" wide
10" wide
10" wide
10" wide
10" wide
10" wide
10" wide
1/3hp/404a
1/3hp/404a
1/3hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a
(6) 1/6
(10) 1/6
Cutting Bd. Width 10" wide
H.P./Refrigerant 1/3hp/404a 1/3hp/404a
Volt/Cycle/Phase 115/60/1
115/60/1
115/60/1
115/60/1
115/60/1
115/60/1
115/60/1
115/60/1
115/60/1
Amps
9.0
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
NEMA
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
Ship Wt. - lbs.
460
496
545
617
672
687
708
726
844
353/337
412/381
529/552
529/596
588/622
588/666
647/710
764/881
1283/2141
1423/2141
1759/3319 1866/3319 1866/3319 1966/3319 2151/3319
BTU Design load 294/267
opening
(-10)/Base (+20)
BTU Design load 1109/2141 1201/2141
opening/base
NOTE: Pan capacity reflected is the actual amount of pans that are clearly accessible by the operator. Units with multiple covers may
actually have additional pan capacity that is partially obstructed by the cover divider/mullion.
BTU based on 86F ambient.
*Pans not provided.
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
51000LPPO Series
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
LEGEND FOR
MODEL # 51000LPPO
AFF = ABOVE FINISHED FLOOR
HP COMPRESSOR
HP
J
JUNCTION BOX 26" AFF
115V/60Hz/1Ph
9' LONG CORD SET
(NEMA 5-15P)
CONDENSATE DRAIN 1/2"
I.D. VINYL TUBING
OC
50" X 10" X .50"
POLY CUTTING BOARD
42" X 10" X .50"
POLY CUTTING BOARD
12x20
4"DP
55" X 10" X .50"
POLY CUTTING BOARD
12x20
4"DP
17.75"
OC
12x20
4"DP
25"
12x20
4"DP
(PANS NOT PROVIDED)
12x20
4"DP
(PANS NOT PROVIDED)
25"
HP
J
(PANS NOT PROVIDED)
18"
COMPR. HSG.
PLATE SHELF
PLATE SHELF
PLATE SHELF
19"REFRIG.
27" REFRIG.
32" REFRIG.
19"REFRIG.
27" REFRIG.
32" REFRIG.
42.75"
36"
42"
50"
55"
33"
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
67" X 10" X .50"
POLY CUTTING BOARD
17.75"
72" X 10" X .50"
POLY CUTTING BOARD
12x20
4"DP
12x20
4"DP
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
17.75"
25"
12x20
4"DP
75" X 10" X .50"
POLY CUTTING BOARD
12x20
4"DP
12x20
4"DP
12x20
4"DP
12x20
4"DP
12x20
4"DP
12x20
4"DP
12x20
4"DP
25"
25"
(PANS NOT PROVIDED)
(PANS NOT PROVIDED)
(PANS NOT PROVIDED)
(PANS NOT PROVIDED)
(PANS NOT PROVIDED)
PLATE SHELF
PLATE SHELF
PLATE SHELF
19"REFRIG.
27" REFRIG.
19"REFRIG.
32" REFRIG.
27" REFRIG.
27" REFRIG.
19"REFRIG.
27" REFRIG.
19"REFRIG.
32" REFRIG.
27" REFRIG.
27" REFRIG.
67"
72"
75"
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
Page 17b
51000LPPO Series
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
80" X 10" X .50"
POLY CUTTING BOARD
85" X 10" X .50"
POLY CUTTING BOARD
12x20
4'DP
12x20
4"DP
12x20
4'DP
12x20
4"DP
12x20
4"DP
25"
12x20
4"DP
12x20
4"DP
12x20
4"DP
25"
(PANS NOT PROVIDED)
(PANS NOT PROVIDED)
PLATE SHELF
PLATE SHELF
27" REFRIG.
27" REFRIG.
32" REFRIG.
32" REFRIG.
32" REFRIG.
32" REFRIG.
32" REFRIG.
32" REFRIG.
80"
85"
BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER
(PANS BY OTHERS)
48.5" X 10" X .50"
POLY CUTTING BOARD
17.75"
48.5" X 10" X .50"
POLY CUTTING BOARD
12x20
4"DP
12x20
4"DP
12x20
4"DP
12x20
4"DP
12x20
4"DP
25"
(PANS NOT PROVIDED)
(PANS NOT PROVIDED)
SECTION VIEW
PLATE SHELF
19"REFRIG.
27" REFRIG.
27" REFRIG.
19"REFRIG.
27" REFRIG.
27" REFRIG.
97"
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement