FX Series model Remote FX-1 Modified FX-1M FX-1AM

FX Series model Remote FX-1 Modified FX-1M     FX-1AM
FX Series Refrigerated Drawer model Remote FX-1 Modified
THE MOST REVOLUTIONARY, ENERGY-EFFICIENT, FLEXIBLE, FOOD-SAFE REFRIGERATION SYSTEM
FX-1M
FX-1AM
Description:
• Flexible Refrigeration
• Energy Efficiency
• Food Safety
model FX-1, shown
with optional recessed
handle
Single refrigerated Insert with unfinished top. The FX Series
revolutionizes point of use refrigeration by allowing the operator
to adjust the temperatures from -5°F (freezer) operation up to
40°F (refrigerator) or any setting in between utilizing its unique
convertible refrigeration system. Using a patented technology that
provides 100% in-drawer cooling, this ultra-efficient self-contained
system provides precise temperature control without compromising operator flexibility.
Specifications:
REFRIGERATION SYSTEM: The FX Series uses a patented indrawer cooling system that directs 100% of the cooling inside
the insulated and removable drawer Insert (see below). The
evaporator coil is mounted horizontally above the drawer Insert
with an integral gasket that seals against the insulated drawer
compartment when closed. The refrigeration system operates
only when the drawer is closed, efficiently managing the airflow while reducing energy and humidity build-up. Press-fit
removable gasket with magnet-to-magnet seal is standard.
DRAWER SYSTEM: The FX Series drawer system is the only fullextension, full product view, drawer system that has the drawer
tracks outside the cooled compartment offering a more reliable,
durable system not prone to the cold or debris environment
common in traditional drawer systems. The full-extension tracks
are constructed of 12 gauge stainless steel with a fully integrated
Insert support system. The drawers slide on self-lubricating Delrin
material requiring no lubricating maintenance by the operator. The
drawer box and intermediate tracks are removable without tools
and can only be reinstalled one-direction for proper fit. The drawer
system has been tested with over 300,000 cycles without failure
(90 pound test load).
REMOVABLE INSULATED INSERT: This exclusive design allows
full removal of the refrigerated compartment for cleaning or
pre-loading. Made of high impact ABS plastic with high density
polyurethane insulation. Provides unparalleled insulation value
with no air gaps.
TEMPERATURE STATEMENT: The unit is provided with a electronic
temperature controller that can be easily adjusted by the operator
to any temperature setting between -5°F (freezer) operation up to
40°F (refrigerator).
CABINET EXTERIOR: The cabinet exterior is high grade stainless
steel to allow long use and beauty while providing easy to maintain
and clean surfaces. Optional Stainless steel tops offer the ability to
use the FX Series as a work-top unit or cooking equipment stand.
CABINET BASE/INTERIOR: The cabinet interior is high grade stainless steel
to allow long use and beauty while providing easy to maintain and clean
surfaces.
ELECTRICAL: Standard 115 volt with NEMA 5-15 cord and plug; In multistack applications, a jumper cable is available to allow up to three units on
one wall circuit (three units total).
Standard Features:
• Convertible Refrigeration System (Refrigerator to Freezer)
• Point-of-use Size and Design
• Precise Temperature Control
• Patented In-drawer Cooling System
• Removable Insulated Drawer Compartment
• Ambient Drawer Track System
• Full-Extension Drawer System
• 100% Front Breathing
• Horizontal Gasket is Out of Harms Way
Options & Accessories:
Flange Kit for FX-1 (for installation in equipment or units by others)
Top Kit (46” x 29.5”, 1” thick) for Work Top Application
Top Kit (48” x 33”, 2” thick) for Cooking Equipment Application
Caster Kit (3.5”)
Leg Kit (6”)
Stacking Collar Kit (for 2-3 high)
Additional Insulated Inserts: Qty. _____
Pan Racks
Recessed Handle(s)
Contact factory for other remote options.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Randell FX Series, Page 18
PP SPEC0163 Rev. B
Revised 01/10
Model Remote FX-1 Modified
PP DWG0001 Rev. B
TOP VIEW
FRONT VIEW
SIDE VIEWS
MODEL REMOTE FX-1 MODIFIED: SINGLE DRAWER WITH UNFINISHED TOP
L
D
H
46” 29.1” 16.4”
No. of Storage
Drawers (cubic
feet)
1
3.0
BTU*
Req.
522
Amp
Draw
(actual)
3
Refrig.
Power
Usage
Freezer
Power
Usage
Volt
Ship
NEMA Weight
1.10kw
1.79kw
115
5-15p
(per day)
(lbs)
(per day)
225
* Evaporator temperature range (+30 to -10ºF) refrigerator/freezer application.
Exhaust fan in housing to remain for condensate evaporation. No drain required.
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of
Dover Corporation.
Incorporating
Adande®
Technology
Model Remote FX-1A Modified
TOP VIEW
FRONT VIEW
SIDE VIEWS
MODEL REMOTE FX-1A MODIFIED: SINGLE DRAWER LOW-HEIGHT UNIT WITH UNFINISHED TOP
L
D
H
46” 29.1” 14.75”
No. of Storage
Drawers (cubic
feet)
1
2.3
BTU*
Req.
522
Amp
Draw
(actual)
3
Refrig.
Power
Usage
Freezer
Power
Usage
Volt
Ship
NEMA Weight
1.10kw
1.79kw
115
5-15p
(per day)
(lbs)
(per day)
225
* Evaporator temperature range (+30 to -10ºF) refrigerator/freezer application.
Exhaust fan in housing to remain for condensate evaporation. No drain required.
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of
Dover Corporation.
Incorporating
Adande®
Technology
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement