FX Series Cook-Top System

model FX2-4N1CS

THE MOST REVOLUTIONARY, ENERGY-EFFICIENT, FLEXIBLE, FOOD-SAFE REFRIGERATION SYSTEM

FX2-4N1CS FX2-4N1CSL FX2-4N1CSR

Description:

• Flexible Refrigeration

• Energy Efficiency

• Food Safety

model FX2-4N1CS, shown with optional recessed handles

Two refrigerated Inserts with cook surface top. Whether operating as a refrigerator, freezer, rapid chiller or safety thaw, the FX Series revolutionizes point of use refrigeration by allowing the operator to adjust the temperatures from -5°F (freezer) operation up to

40°F (refrigerator) or any setting in between utilizing its unique convertible refrigeration system. Using a patented technology that provides 100% in-drawer cooling, this ultra-efficient self-contained system operates as refrigerator, freezer, rapid chiller and safety thaw, providing precise temperature control without compromising operator flexibility.

Specifications:

REFRIGERATION SYSTEM: The FX Series uses a patented indrawer cooling system that directs 100% of the cooling inside the insulated and removable drawer Insert (see below). The evaporator coil is mounted horizontally above the drawer Insert with an integral gasket that seals against the insulated drawer compartment when closed. The refrigeration system operates only when the drawer is closed, efficiently managing the airflow while reducing energy and humidity build-up. Press-fit removable gasket with magnet-to-magnet seal is standard.

CABINET BASE/INTERIOR: The cabinet interior is high grade stainless steel to allow long use and beauty while providing easy to maintain and clean surfaces.

ELECTRICAL: Standard 115 volt with NEMA 5-15 cord and plug; In multistack applications, a jumper cable is available to allow up to three units on one wall circuit (three units total).

DRAWER SYSTEM: The FX Series drawer system is the only fullextension, full product view, drawer system that has the drawer tracks outside the cooled compartment offering a more reliable, durable system not prone to the cold or debris environment common in traditional drawer systems. The full-extension tracks are constructed of 12 gauge stainless steel with a fully integrated

Insert support system. The drawers slide on self-lubricating Delrin material requiring no lubricating maintenance by the operator. The drawer box and intermediate tracks are removable without tools and can only be reinstalled one-direction for proper fit. The drawer system has been tested with over 300,000 cycles without failure

(90 pound test load).

REMOVABLE INSULATED INSERT: This exclusive design allows full removal of the refrigerated compartment for cleaning or pre-loading. Made of high impact ABS plastic with high density polyurethane insulation. Provides unparalleled insulation value with no air gaps.

Standard Features:

• Convertible Refrigeration System (Refrigerator, Freezer, Rapid Chill

and Safety Thaw)

• Rapid Chills 20 lbs. of Product Stored in (2) 12x20x2” Pans in 4 Hours

• Safety Thaws 20 lbs. of Product Stored in (2) 12x20x2” Pans in

6-8 Hours

• Point-of-use Size and Design

• Precise Temperature Control

• Patented In-drawer Cooling System

• Removable Insulated Drawer Compartment

• Ambient Drawer Track System

• Full-Extension Drawer System

• 100% Front Breathing

• Horizontal Gasket is Out of Harms Way

• Individual Compressor Per Drawer

• Casters

TEMPERATURE STATEMENT: The unit is provided with a electronic temperature controller that can be easily adjusted by the operator to any temperature setting between -5°F (freezer) operation up to

40°F (refrigerator).

CABINET EXTERIOR: The cabinet exterior is high grade stainless steel to allow long use and beauty while providing easy to maintain and clean surfaces. Optional Stainless steel tops offer the ability to use the FX Series as a work-top unit or cooking equipment stand.

Options & Accessories:

4” Heavy Duty Caster Set

Stainless Steel Back Panel

Leg Kit (6” High - Overall Surface at 24”)

Additional Insulated Inserts: Qty. _____

Thaw Racks

Pan Racks

Recessed Handle(s)

1055 Mendell Davis Drive, Jackson, MS 39272

888-994-7636, unifiedbrands.net

Please reference our website for the most updated product information and specifications.

Randell FX Series, Page 8

PP SPEC0150 Rev. B

Revised 01/10

Model FX2-4N1CS

PP DWG0008 Rev. A

TOP VIEW

FRONT VIEW SIDE VIEWS

MODEL

FX2-4N1CS

FX2-4N1CSL

FX2-4N1CSR

Left

4N1

4N1

2N1

Right

4N1

2N1

4N1 model FX2-4N1CS shown

Model

FX2-

4N1CS

L D H

TWO DRAWER UNITS WITH FINISHED TOP; ON CASTERS

No. of

Drws.

Storage

(cubic feet)

Comp.

Size

Amp

Draw

(actual)

Refrig.

Power

Usage

(per day)

Freezer

Power

Usage

(per day)

Blast Chiller

Power Usage

4 Hours

(per unit)

Safety Thaw

Power Usage

6 Hours

(per unit)

96” 33” 24” 2 6.0

8.8cc each

6.3 each

3.42kw 6.08kw

2.1kw

1.4kw

Volt NEMA

115 ea

(2)

5-15p

Ship

Weight

(lbs)

780

FX2-

4N1CSL 96” 33” 24”

2 6.0

8.8cc

6.1cc

10.2

3.42kw 6.08kw

2.1kw

1.4kw

115 ea

(2)

5-15p

780

FX2-

4N1CSR 96” 33” 24”

2 6.0

6.1cc

8.8cc

10.2

3.42kw 6.08kw

2.1kw

1.4kw

115 ea

(2)

5-15p

780

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2009 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of

Dover Corporation.

Incorporating

Adande ®

Technology