Randell FX3-4N1SSB, FX3-4N1SSC, FX3-4N1SSCB, FX3-4N1SST, FX3-4N1SSTB, FX3-4N1SSTC User manual

Randell FX3-4N1SSB, FX3-4N1SSC, FX3-4N1SSCB, FX3-4N1SST, FX3-4N1SSTB, FX3-4N1SSTC User manual
FX Series Refrigerated Drawer model FX3-4N1SS
THE MOST REVOLUTIONARY, ENERGY-EFFICIENT, FLEXIBLE, FOOD-SAFE REFRIGERATION SYSTEM
FX3-4N1SST
FX3-4N1SSTC
FX3-4N1SSTB
FX3-4N1SSC
FX3-4N1SSCB
FX3-4N1SSB
Description:
• Flexible Refrigeration
• Energy Efficiency
• Food Safety
model FX3-4N1SST
Three refrigerated Inserts. Whether operating as a refrigerator,
freezer, rapid chiller or safety thaw, the FX Series revolutionizes
point of use refrigeration by allowing the operator to adjust the
temperatures from -5°F (freezer) operation up to 40°F (refrigerator) or any setting in between utilizing its unique convertible
refrigeration system. Using a patented technology that provides
100% in-drawer cooling, this ultra-efficient self-contained system
operates as refrigerator, freezer, rapid chiller and safety thaw,
providing precise temperature control without compromising
operator flexibility.
Specifications:
REFRIGERATION SYSTEM: The FX Series uses a patented indrawer cooling system that directs 100% of the cooling inside
the insulated and removable drawer Insert (see below). The
evaporator coil is mounted horizontally above the drawer Insert
with an integral gasket that seals against the insulated drawer
compartment when closed. The refrigeration system operates
only when the drawer is closed, efficiently managing the airflow while reducing energy and humidity build-up. Press-fit
removable gasket with magnet-to-magnet seal is standard.
DRAWER SYSTEM: The FX Series drawer system is the only fullextension, full product view, drawer system that has the drawer
tracks outside the cooled compartment offering a more reliable,
durable system not prone to the cold or debris environment
common in traditional drawer systems. The full-extension tracks
are constructed of 12 gauge stainless steel with a fully integrated
Insert support system. The drawers slide on self-lubricating Delrin
material requiring no lubricating maintenance by the operator. The
drawer box and intermediate tracks are removable without tools
and can only be reinstalled one-direction for proper fit. The drawer
system has been tested with over 300,000 cycles without failure
(90 pound test load).
REMOVABLE INSULATED INSERT: This exclusive design allows
full removal of the refrigerated compartment for cleaning or
pre-loading. Made of high impact ABS plastic with high density
polyurethane insulation. Provides unparalleled insulation value
with no air gaps.
TEMPERATURE STATEMENT: The unit is provided with a electronic
temperature controller that can be easily adjusted by the operator
to any temperature setting between 0°F (freezer) operation up to
40°F (refrigerator).
CABINET EXTERIOR: The cabinet exterior is high grade stainless
steel to allow long use and beauty while providing easy to maintain
and clean surfaces. Optional Stainless steel tops offer the ability to
use the FX Series as a work-top unit or cooking equipment stand.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
CABINET BASE/INTERIOR: The cabinet interior is high grade stainless steel
to allow long use and beauty while providing easy to maintain and clean
surfaces.
ELECTRICAL: Standard 115 volt with NEMA 5-15 cord and plug; In multistack applications, a jumper cable is available to allow up to three units on
one wall circuit (three units total).
Standard Features:
• Convertible Refrigeration System (Refrigerator, Freezer, Rapid Chill and Safety Thaw)
• Rapid Chills 20 lbs. of Product Stored in (2) 12x20x2” Pans in 4 Hours
• Safety Thaws 20 lbs. of Product Stored in (2) 12x20x2” Pans in
6-8 Hours
• Point-of-use Size and Design
• Precise Temperature Control
• Patented In-drawer Cooling System
• Removable Insulated Drawer Compartment
• Ambient Drawer Track System
• Full-Extension Drawer System
• 100% Front Breathing
• Horizontal Gasket is Out of Harms Way
• Individual Compressor Per Drawer
• Casters
Options & Accessories:
Stainless Steel Back Panel
Leg Kit (6”)
Additional Insulated Inserts: Qty. _____
Thaw Racks
Pan Racks
Randell FX Series, Page 10
PP SPEC0152 Rev. A
Revised 5/09
Model FX3-4N1SST
PP DWG0014 Rev. A
TOP VIEW
FRONT VIEW
SIDE VIEWS
Incorporating
Adande®
Technology
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
model FX3-4N1SS
THREE DRAWER UNITS WITH FINISHED TOP; ON CASTERS
Refrig. Freezer
Power
Power
Usage
Usage
(per day) (per day)
Blast Chiller
Power Usage
4 Hours
(per unit)
Safety Thaw
Power Usage
6 Hours
(per unit)
9.12kw
2.1kw
1.4kw
115
(2)
ea 5-15p
905
5.13kw
9.12kw
2.1kw
1.4kw
115
(2)
ea 5-15p
905
6.3
&
10.2
5.13kw
9.12kw
2.1kw
1.4kw
115
(2)
ea 5-15p
905
(2) 6.1cc
(1) 8.8cc
6.3
&
7.8
5.13kw
9.12kw
2.1kw
1.4kw
115
(2)
ea 5-15p
905
9.0
(1) 6.1cc
(2) 8.8cc
6.3
&
10.2
5.13kw
9.12kw
2.1kw
1.4kw
115
(2)
ea 5-15p
905
9.0
(2) 6.1cc
(1) 8.8cc
6.3
&
7.8
5.13kw
9.12kw
2.1kw
1.4kw
115
(2)
ea 5-15p
905
No. of
Drws.
Storage
(cubic
feet)
Comp.
Size
Amp
Draw
(actual)
46” 29.6” 53.7”
3
9.0
(2) 6.1cc
(1) 8.8cc
6.3
&
7.8
5.13kw
FX346” 29.6” 53.7”
4N1SSTC
3
9.0
(1) 6.1cc
(2) 8.8cc
6.3
&
10.2
FX346” 29.6” 53.7”
4N1SSTB
3
9.0
(1) 6.1cc
(2) 8.8cc
FX34N1SSC
46” 29.6” 53.7”
3
9.0
FX346” 29.6” 53.7”
4N1SSCB
3
FX34N1SSB
46” 29.6” 53.7”
3
Top
Center
Bottom
FX3-4N1SST
4N1
2N1
2N1
FX3-4N1SSTC
4N1
4N1
2N1
FX3-4N1SSTB
4N1
2N1
4N1
FX3-4N1SSC
2N1
4N1
2N1
FX3-4N1SSCB
2N1
4N1
4N1
FX3-4N1SSB
2N1
2N1
4N1
MODEL
FX34N1SST
L
MODEL
D
H
Volt
Ship
NEMA Weight
(lbs)
Incorporating
Adande®
Technology
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement