EX17 (RHFE-433RWTA)

Type of Appliance

Rinnai Model Number

Gas Rate Input (BTU/hour)

Gas Rate Output (BTU/hour)

AFUE Rating

Minimum Gas Supply Pressure

Maximum Gas Supply Pressure

Electrical Connection

Gas Connection

Combustion System

Ignition System

Fan CFM Output:

Temperature Settings

Temperature Control

Humidifier Tray

Weight

Clearance from Combustibles

Noise Level

Warm Air Outlet

FEATURES

Linear function modulation:

Negative coefficient thermistor:

Variable speed inducer motor:

Quiet operation:

Self diagnostic electronics:

© 2009 Rinnai Corporation

EX17 (RHFE-433RWTA)

Direct vent wall furnace suitable for homes, apartments, and condominiums; modular/mobile home approved; forced combustion, forced convection

Low - 8,200

High - 16,700

Low - 6,560

High - 13,360

Low - 8,200

High - 16,700

Low - 6,560

High - 13,360

% %

3.5 in (89 mm) W.C. 8 in (203 mm) W.C.

10.5 in (267 mm) W.C

AC 120V, 60 Hz, 47 watts

13 in (330 mm) W.C.

1/2 inch FNPT

Stainless steel inshot burners

Direct spark

Low: 110.5 High: 141.3

Low (LO): minimum combustion

60° - 80° F in 2° increments

High (HI): maximum combustion

• Electronic 7 day, 28 event programmable set back thermostat

• Frost protection function allows a pre-set minimum room temperature

• Temperature limiting program to comply with Inside Design

Temperature limits

Enameled tray with capacity of 3 pints (1.3 liters)

Approximately 51 lbs (23 kg)

Side: 2 inches (50 mm)

Front: 40 inches (1 m)

Top: 10 inches (250 mm)

32 - 41 dB(A)

Bottom front louvers provides precise gas flow detects temperature change in 1/2 of a degree monitors and controls combustion fan reduces noise through use of swept blades in convection fan; and through the design of the combustion chamber and heat exchanger which silently expand or contract due to temperature changes continually monitors functions; provides auto shutdown codes; indicates when air filter needs cleaning

RHFE-433RWTA SP 7/2009

EX17 (RHFE-433RWTA)

Safety Devices

Venting

Maximum Vent Length

Wall Thickness and

Flue Manifold Kits

(the “A” vent kit is included with the appliance)

Warranty

• Flame rod detects flame failure; results in auto shutdown to prevent escape of gas

• Bi-metal switch, thermal fuse, and thermistor detect overheat condition; results in auto shutdown

• 3 amp fuse protects against power surge; results in auto shutdown

• Abnormal spark at time of ignition results in auto shutdown

• Combustion fan purges any gas from the combustion chamber before ignition

• Convection fan continues to run after burner shutdown to cool internal parts

• Function lock prevents inadvertent operation

• Appliance shuts down if room reaches 104° F (40° C) concentric; 3 1/8 inch (80 mm) wall hole

13 feet (4 m) with a maximum of 2 bends; maximum 8 feet (2.4 m) vertically

Name

S Vent Kit

A Vent Kit

B Vent Kit

C Vent Kit

D Vent Kit

Kit No.

FOT-150

FOT-151

FOT-152

FOT-153

FOT-154

fits walls

3 - 4 1/2 in (75 - 115 mm)

4 1/2 - 9 1/2 in (115 - 240 mm)

9 1/2 - 15 3/4 in (240 - 400mm)

15 3/4 - 23 5/8 in (400 - 600 mm)

23 5/8 - 31 1/2 in (600 - 800 mm)

Labor: 2 years; Parts: 5 years; Heat Exchanger: 10 years with years 6-10 prorated

Rinnai is continually updating and improving products; therefore, specifications are subject to change without prior notice. Local, state, provincial and federal codes must be adhered to prior to installation.

DIMENSIONS

6 1/2" (165mm) 3 3/8" (85mm)

Rinnai Corporation • 103 International Drive • Peachtree City, GA 30269 • Toll-Free: 1-800-621-9419 • Fax: 678-829-1666 • www.rinnai.us