P.O. Box 16625, Jackson, MS 39236-6625

280 South Perkins St., Ridgeland, MS 39157 e-mail: [email protected] - website: www.robotcoupeusa.com - Phone : 1-800-824-1646

• Blixer

®

4

IMPORTANT WARNING

W A R N I N G

KEEP THESE INSTRUCTIONS

IN A SAFE PLACE

WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to misuse of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you know your appliance and enable you to use the equipment correctly. The operation manual should be kept within easy access to all users for reference and should be read completely by all first time users of the machine.

UNPACKING

• Carefully remove the equipment from the packaging and take out all the boxes or packets containing attachments or specific items.

• WARNING: some of the parts are very sharp e.

g. blades… etc.

INSTALLATION

• We recommend that you install your machine on a stable solid base at a comfortable working height.

CONNECTION

• Always check that your power supply corresponds to that indicated on the serial number plate and that it is properly sized.

HANDLING

• Always wear cut-resistant gloves when handling the cutter blade.

ASSEMBLY PROCEDURES

• Follow the various assembly procedures carefully

(see page 6) and make sure that all the attachments are correctly positioned.

Robot Coupe can in no way be held responsible for the user’s failure to follow the basic rules of cleaning and maintenance.

USE

• Never tamper with, or defeat the purpose of the locking and safety systems.

• Do not put nonfood objects in the bowl

• Do not leave the machine running unattended.

CLEANING

• Always unplug your machine before cleaning.

• Always clean the machine and attachments at the end of each use.

• Never place the motor unit in water.

• For par ts made of aluminum alloys, use cleaning detergents suitable for aluminum.

• For plastic parts, do not use detergents that are too alkaline (i.e., containing too much caustic soda or ammonia…).

MAINTENANCE

• Always unplug the appliance before servicing.

• Check the seals regularly and ensure that the safety devices are in good working order.

• It is particularly important to maintain and check the attachments since certain products contain corrosive agents e.g. citric acid.

• NOTICE: Never operate the appliance if the power cord or plug has been damaged.

• If the machine fails to operate as described in this manual, or if the machine malfunctions in any way, remove the machine from use and have it serviced. Additionally, discard all food processed at the time of the malfunction.

• Contact your local Authorized Service Agency if something appears to be wrong.

OPERATING INSTRUCTIONS

MANUAL DE INSTRUCCIÓN

We reserve the right to alter at any time without notice the technical specifications of this appliance.

© All rights reserved for all countries by: ROBOT-COUPE S .

N .

C .

Nos reservamos el derecho de modificar en todo momento y sin previo aviso las características técnicas de este aparato.

© Todos los derechos para cada pais reservados por: ROBOT-COUPE S .

N .

C .

Nous nous réservons le droit de modifier à tout moment et sans préavis les caractéristiques techniques de cet appareil.

© Tous droits réservés pour tous pays par : ROBOT-COUPE S .

N .

C .

NOTICE D’INSTRUCTION

1

SUMMARY

WARRANTY

IMPORTANT WARNING

INTRODUCTION TO YOUR NEW

EMULSIFIER-MIXER Blixer ® 4

SWITCHING ON THE MACHINE

• Advice on electrical connections

• Control panel

ASSEMBLY

USES AND EXAMPLES

CLEANING

• Motor unit

• Blade

• Wiper assembly

MAINTENANCE

• Blade

• Motor seal

• Bowl locating bushings

• Wiper assembly

TECHNICAL SPECIFICATIONS

• Weight

• Dimensions

• Working height

• Noise level

SAFETY

TECHNICAL DATA (Page 21)

• Parts diagram

• Electrical diagram

3

4

ROBOT COUPE U.S.A., INC. LIMITED WARRANTY

YOUR NEW ROBOT COUPE

PRODUCT IS WARRANTED TO THE

ORIGINAL PURCHASER FOR A

PERIOD OF ONE YEAR FROM THE

DATE OF PURCHASE.

This LIMITED WARRANTY is against defects in the material and/or workmanship, and includes labor for replacement of defective parts, provided repairs are performed by an authorized service agency (see attached list).

The Customer must inform the

Service Agency of the possibility of warranty coverage and provide a copy of the dated sales or delivery receipt BEFORE WARRANTY REPAIRS

ARE BEGUN.

Replacement parts and accessories are warranted for ninety (90) days from the date of purchase when purchased separately and will be verified by dated sales receipt OR packing slip which lists that item.

All parts or accessories replaced under warranty must be returned to the Service Agency.

THE FOLLOWING ARE NOT

COVERED BY THE ROBOT COUPE

U.S.A. INC LIMITED WARRANTY:

1 Damage caused by abuse, misuse, dropping, or other similar damage caused by or resulting from failure to follow assembly, operating, cleaning, user maintenance or storage instructions.

2 -

Labor to sharpen and/or replacements for blades that have become blunt, chipped or worn after a normal or excessive period of use.

3 Materials or labor to replace or repair scratched, stained, chipped, pitted, dented or discolored surfaces, blades, knives, attachments or accessories.

4 Any alteration, addition, or repair that has not been carried out by the company or an approved service agency.

5 -

Transportation of the appliance to or from an approved service agency.

6 -

Labor charges to install or test new attachments or accessories (i.e., bowls, plates, blades, attachments), which have been replaced for any reason.

7 The cost of changing direction-of-rotation of three-phase electric motors (Installer is responsible).

8 SHIPPING DAMAGES. Visible and/or hidden damage is the responsibility of the freight carrier. The consignee must inform the carrier and consignor immediately, or upon discovery in the case of hidden defects.

KEEP ALL ORIGINAL CONTAINERS AND PAC-

KING MATERIALS FOR CARRIER INSPECTION.

Neither ROBOT COUPE U.S.A., INC. nor its affiliated companies or any of its distributors, directors, agents, employees, or insurers will be liable for indirect damage, losses, or expenses linked to the appliance or the inability to use it.

The ROBOT COUPE U.S.A., INC. warranty is given expressly and in lieu of all other warranties, expressed or implied, for merchantability and for fitness toward a particular purpose and constitutes the only warranty made by ROBOT COUPE U.S.A., INC..

IMPORTANT WARNING

W A R N I N G

KEEP THESE INSTRUCTIONS

IN A SAFE PLACE

WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to misuse of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you know your appliance and enable you to use the equipment correctly. The operation manual should be kept within easy access to all users for reference and should be read completely by all first time users of the machine.

UNPACKING

• Carefully remove the equipment from the packaging and take out all the boxes or packets containing attachments or specific items.

• WARNING: some of the parts are very sharp e.

g. blades… etc.

INSTALLATION

• We recommend that you install your machine on a stable solid base at a comfortable working height.

CONNECTION

• Always check that your power supply corresponds to that indicated on the serial number plate and that it is properly sized.

HANDLING

• Always wear cut-resistant gloves when handling the cutter blade.

ASSEMBLY PROCEDURES

• Follow the various assembly procedures carefully

(see page 6) and make sure that all the attachments are correctly positioned.

Robot Coupe can in no way be held responsible for the user’s failure to follow the basic rules of cleaning and maintenance.

USE

• Never tamper with, or defeat the purpose of the locking and safety systems.

• Do not put nonfood objects in the bowl

• Do not leave the machine running unattended.

CLEANING

• Always unplug your machine before cleaning.

• Always clean the machine and attachments at the end of each use.

• Never place the motor unit in water.

• For par ts made of aluminum alloys, use cleaning detergents suitable for aluminum.

• For plastic parts, do not use detergents that are too alkaline (i.e., containing too much caustic soda or ammonia…).

MAINTENANCE

• Always unplug the appliance before servicing.

• Check the seals regularly and ensure that the safety devices are in good working order.

• It is particularly important to maintain and check the attachments since certain products contain corrosive agents e.g. citric acid.

• NOTICE: Never operate the appliance if the power cord or plug has been damaged.

• If the machine fails to operate as described in this manual, or if the machine malfunctions in any way, remove the machine from use and have it serviced. Additionally, discard all food processed at the time of the malfunction.

• Contact your local Authorized Service Agency if something appears to be wrong.

5

INTRODUCTION TO YOUR

NEW EMULSIFIER-MIXER

Blixer

®

4

ROBOT-COUPE has developed a new concept in appliances: the Blixer

®

.

The Blixer ® combines the features of two well-known appliances: the cutter and the blender-mixer.

The Blixer ® is perfectly geared to professional needs. It can perform a number of tasks that you will soon discover as you use it.

The Blixer ® will make it easy to prepare mixed liquid or semi-liquid, raw or cooked meals.

The Blixer ® replaces the blender which has never been entirely satisfactory because it cannot process solid foods.

Thanks to its simple design, all components requiring frequent handling for maintenance or cleaning can be fitted and removed quickly.

To make things easier for you, this manual gives a breakdown of all the various fitting operations.

This manual contains important information designed to help the user get the most out of the emulsifiermixer Blixer ® .

We therefore recommend that you read it carefully before using your machine.

W A R N I N G

This appliance must be plugged into an grounded socket (risk of electrocution).

Your Blixer ® 4 is fitted with a single phase motor :

120 V / 60Hz

• CONTROL PANEL

Red knob

Green knob

Black knob =

1 speed 3450 rpm.

=

=

“Off” switch.

“On” switch.

“Pulse” control.

1) With the motor base facing you, place the bowl onto the motor base with the handle toward the front. Turn the bowl just off-center and to the left as you lower it onto the base.

ASSEMBLY

3) Place the blade assembly onto the motor shaft. Rotate the blade assembly until it drops into place. The bottom blade should be level with and just off the bottom of the bowl.

4) Press the button on the wiper handle and insert the wiper shaft through the underside of the lid and into the wiper handle. Then, release the button on the handle.

It may be necessary to rotate the parts in order to align the shaft and handle. Pull at the parts a little to make sure they are locked together.

SWITCHING ON

THE MACHINE

6

• ADVICE ON ELECTRICAL CONNECTION

Before plugging in, make sure your power supply corresponds to that indicated on the machine’s serial number plate.

2) Then, turn the bowl back to the right (counterclockwise) locking it onto the motor base tabs.

5) Locate the downward-facing tab on the bowl lid. Place the lid on the bowl with the tab over the bowl handle, then lock the bowl clamps over the lid.

USES AND

EXAMPLES

The Blixer ® will enable you to perform all your cutting tasks in minimum time ; we recommend therefore that you keep a close eye on the mixture in order to obtain the desired results.

HOSPITAL USES:

SPOON FEEDING

• Minced foods: meat, fish... • Vegetable purees

• Mousses: vegetables, fish... • Compotes of stewed fruit

SEMI-LIQUID FEEDING

This simply entails diluting spoon-feeding preparations:

• Minced meat + gravy • Puree + liquid (broth, milk...)

• Soups / creamed soups • Fruit compotes + syrup or water

LIQUID FEEDING (for use via tubes)

• Soups and any preparations that can be liquidized.

RESTAURANTS AND DELICATESSEN :

• Butter mixtures: snail butter, salmon butter, anchovie butter…

• Sauces: green sauce, mayonnaise, remoulade, ailloli, emulsify sauces with tomatoes, cream, parsley…

• Grinding for bisque: lobster, scampi, seashells...

• Grinding: herbs, seeds, powders....

• Mixing: homogeneization of creams, mixed components, varied ingredients...

CLEANING

W A R N I N G

As a precaution, always unplug your appliance before cleaning it (risk of electrocution).

• MOTOR UNIT

Never immerse the motor unit in water. Clean it with a damp cloth or sponge.

I M P O R T A N T

Check that your detergent is suitable for cleaning plastic parts. Some washing agents are too alkaline (e.g. high levels of caustic soda or ammonia) and totally incompatible with certain types of plastic, causing them to deteriorate rapidly.

Cleaning of the motor base assembly must be done with care.

First unplug the unit . A sponging with a cloth lightly soaked (not dripping) in a mild detergent is acceptable, making sure the water is not permitted to penetrate the shaft seal or around the switches. Clean around the shaft seal with a small brush, taking care to remove all food. Do not forget to clean the motor shaft. Rinse the motor base first using a cloth lightly dampened (not dripping) with water, then with a sanitizing solution, and dry the machine with a soft cloth removing all liquids from seal areas.

WARNING: NEVER USE PURE BLEACH.

Always dilute the detergent following the instructions given by the manufacturer.

Clean per the following instructions or as required by local health department regulations.

• BLADE

The blade cap should be removed for cleaning.

Wear cut-resistant gloves when removing the cap.

Put a screwdriver or similar tool into the blade assembly from the bottom, and knock the cap out the top.

• WIPER ASSEMBLY

To clean the scraper arm, dismantle it as follows:

- Hold the scraper in one hand and the handle in the other hand (photo 1).

- Press the metallic knob included in the handle, pull the handle up (photo 2).

- Then it is possible to dismantle the Wiper assembly from the lid to clean it (photo 3).

Photo 1

Photo 3

Photo 2

The bowl, blade, cap, lid, and wiper assembly are dishwasher safe. They can be washed in a dish machine or three-tank system pot sink. Pre-rinse the attachments before washing to remove any bulk food on the parts. A stiff bristle brush or power sprayer faucet attachment is effective in knocking the food out of the crevices as a pre-rinse procedure. The washer should have an industry-standard wash, rinse and sanitization cycle. Allow the parts to airdry after sanitizing and before reassembly.

7

8

NOTE: The high temperatures of dish machines will tend to shorten the life of the plastic and rubber parts. Hand washing using a three-pot sink will provide for the longest life of these parts.

Wear cut-resistant gloves when cleaning the blade.

Bowl wiper

Handle latch

Sraper handle

MAINTENANCE

Lid wiper

• BLADE

The quality of the cut depends mainly on the sharpness of your blades and the degree of wear.

The blades are actually wearing parts, which should be replaced occasionally to ensure consistent quality in the final product.

• MOTOR SEAL

An examination should be made periodically to assure that a seal against liquids is being maintained around the motor shaft. With proper care and depending on use, the seal should last for a year or more. However, it can and should be replaced whenever wear or erosion is noted or minimally once every three to six months. It is recommended that the seal be replaced by an authorized repair agency.

• BOWL LOCATING PLATES

These bushings are located on the lower inside of the bowl and hold the bowl in place. If they become worn, they will need to be replaced.

• SCRAPER ARM

The assembly includes three rubber wipers. They will need to be replaced when they become worn.

Replacements are available.

• WEIGHT (Lbs)

Blixer ® 4

Scraper arm

• DIMENSIONS (in inches)

B

A

E

C

D

TECHNICAL

SPECIFICATIONS

Net weight Gross weight

Blixer ® 4

A 8

C 9

D 12

E 10

/

8

• WORKING HEIGHT

We recommend that you position the Blixer ® on a stable worktop so that the upper edge of the cutter bowl is at a height of between 47 and 51 inches.

• NOISE LEVEL

The equivalent continuous sound level when the

Blixer ® is operating on no-loads is less than

70 dB (A).

SAFETY

The Blixer ® 4 is fitted with a magnetic safety device and motor braking system. When you open the lid, the motor stops. To restart the machine, simply close the lid and press the green switch.

Allow the blades to come to a complete stop before opening the lid so that liquids will not splash.

W A R N I N G

This machine is equipped with a thermal overload.

If the machine is overloaded, the breaker will trip.

If this occurs, first allow the machine to cool for a period of up to 30 minutes then, press the overload reset located on the motor base. Try to restart. If the machine will not start, remove the bowl, reduce the amount of food being processed, and try again.

R E M E M B E R

Never try to override or defeat the purpose of, the locking and safety systems.

Never put nonfood objects into the bowl.

Do not overload the machine.

Never leave the machine running unattended.

TECHNICAL DATA

DATOS TÉCNICOS

DONNÉES TECHNIQUES

21

22

23

25

P.O. Box 16625, Jackson, MS 39236-6625

280 South Perkins St., Ridgeland, MS 39157 e-mail: [email protected]

website: www.robotcoupeusa.com

Phone : 1-800-824-1646