Cadillac 2008 STS-V Automobile User Manual

2015
C onvenience /P ersonalization G uide
Review this guide for an overview of some important features in your Cadillac Escalade. Some optional equipment (denoted by ♦) described
in this guide may not be included in your vehicle. More detailed information can be found in your Owner Manual.
INSTRUMENT PANEL
Instrument Panel
Illumination Control/
Exterior Lamp
Control
Power Mirror
Control/Door
Lock Switch/
Window Buttons
4WD
Control
Head-Up
Display
Controls♦
Cruise Control/
Voice Recognition/
Heated Steering
Wheel Buttons
Windshield
Wipers Lever
Power Tilt/
Telescope
Steering Wheel
Control
Instrument
Cluster/Driver
Information
Center
Audio Steering
Wheel Controls/
5-way Control
2
Power Assist
Steps♦/Adjustable
Pedals/Magnetic
Ride Control Buttons
Engine Start/
Stop Button
CUE
Touch
Screen
Heated/
Cooled Seat
Buttons
Glove Box/Parking
Assist/Lane
Departure Warning♦/
Traction Control and
StabiliTrak Buttons
Climate
Controls
Audio
System
Controls
REMOTE KEYLESS ENTRY
TRANSMITTER (KEY FOB)
KEYLESS ACCESS SYSTEM
The Keyless Access System enables operation of the doors,
liftgate and ignition without removing the Remote Keyless Entry
transmitter from your pocket or purse. The transmitter must be
within 3 feet of the door being unlocked or the liftgate.
Lock
Press to lock all doors.
Unlock
Press to unlock the driver’s door.
Press again to unlock all doors.
Press and hold for 4 seconds to open all windows.
Keyless Unlocking
With the transmitter within range:
Press the lock button on the
­driver’s door handle to unlock the
driver’s door; press it again within
5 seconds to unlock all doors.
Press the lock button on a
­passenger door handle to unlock
all doors.
Press the touch pad on the liftgate handle to open the
power liftgate.
A
Liftglass
Press twice to open the liftglass.
Power Liftgate
Press twice to open or close the power liftgate.
Remote Start
Use to start the engine from outside the vehicle. See Adaptive
Remote Start on page 4.
Keyless Locking
With the ignition off, the transmitter out of the vehicle, and all
doors closed:
Press the lock button on any door handle to lock all doors
immediately.
If Passive Locking is turned on, all doors will lock automatically
after a short delay once all doors are closed.
Vehicle Locator/Panic Alarm
Press and release to locate your vehicle. The turn signal lamps
flash and the horn sounds.
Press and hold for 3 seconds to activate the alarm. The turn
signal lamps flash and the horn sounds for 30 seconds or until
the button is pressed again.
Door Key
Press the button (A) on the side of the transmitter to pull the door
key out of the transmitter. Use the key to lock/unlock the driver’s
door if needed.
Note: To change the door lock and unlock settings, go to Remote Lock,
Unlock, Start in the Vehicle Settings menu.
See Keys, Doors and Windows in your Owner Manual.
Note: To change the Remote Keyless Entry settings, go to Remote
Lock, Unlock, Start in the Vehicle Settings menu.
See Keys, Doors and Windows in your Owner Manual.
­­­­­­3
PUSHBUTTON START
ADAPTIVE REMOTE START
Start
With the vehicle in Park or
Neutral, press the brake pedal
and then press the ENGINE
START/STOP button to start the
engine. The green indicator on
the button will illuminate.
Starting the Vehicle
1. Press and release the
Lock button on the Remote Keyless
Entry transmitter.
2. Immediately press and hold the
Remote Start button until
the turn signal lamps flash (about 4 seconds).
When the vehicle starts, the doors remain locked and the parking lamps will light and remain on while the engine is running.
The engine will continue running for 10 minutes. Repeat these
steps for a 10-minute time extension. Remote start can be
extended only once.
3. Before driving, press the brake pedal and then press the
ENGINE START/STOP button to turn on the ignition.
Note: The Remote Keyless Entry
­transmitter must be in the vehicle to
turn on the ignition. If the transmitter
battery is weak, place the transmitter
in the pocket in the center console
­storage compartment to enable the
engine to start. Replace the transmitter
battery as soon as possible.
Canceling a Remote Start
Press and hold the
Remote Start button until the parking
lamps turn off.
Stop/Off
Shift to Park and press the
ENGINE START/STOP button to turn off the engine.
Power will be available for 10 minutes to operate the audio system
until the driver’s door is opened and to operate the windows and
sunroof♦ until any door is opened.
Heated/Cooled Seat Operation
The heated/cooled seats will turn on during a remote start
(if selected in the Vehicle Settings menu) when outside tem­­p­eratures warrant. The seat button indicators do not illuminate
­during a remote start.
Accessory
With the engine off and the brake pedal NOT depressed, press
the ENGINE START/STOP button to place the ignition system
in the Accessory mode. The yellow indicator on the button will
­illuminate.
Note: To change the heated/cooled seat settings, go to Remote Lock,
Unlock, Start in the Vehicle Settings menu.
See Keys, Doors and Windows in your Owner Manual.
See Driving and Operating in your Owner Manual.
4
STEERING WHEEL CONTROLS
Voice Recognition
Cancel
Press to cancel cruise control without erasing the set speed
from memory.
Push to Talk
Press to interact with the OnStar, Bluetooth or CUE system. Wait
for the beep before speaking.
End Call/Mute
Press to end/decline a call or mute the audio system.
Cruise Control
Adaptive Cruise Control♦
Follow Distance Gap
Press repeatedly to set a following gap of Far, Medium, or Near.
Adaptive Cruise Control (ACC) enhances traditional cruise control by maintaining a driver-selected following gap between your
vehicle and a vehicle detected directly ahead. Once a speed is set
using the Cruise Control buttons on the steering wheel, the vehicle
will maintain the selected gap distance by braking or accelerating.
When a slower vehicle is detected ahead, the
Vehicle Ahead
symbol is displayed and the vehicle brakes moderately to maintain
the selected following gap. The ACC system may slow your vehicle
to a stop behind the detected vehicle. When the ACC system is
holding the vehicle at a stop, always be prepared to manually
apply the brakes.
If driver action is required to apply sufficient braking behind a
detected vehicle, a visual alert flashes on the windshield and the
Safety Alert Seat pulses. See Safety Alert Seat on page 14.
See Instruments and Controls in your Owner Manual.
On/Off
On/Off (Adaptive Cruise
Control♦)
SET Set Speed
With Cruise Control on, press
the control bar down fully to set
the cruise speed.
RES Resume Speed
With Cruise Control on, press
the control bar up fully to resume the previous set speed.
Note: Changing the gap settings automatically changes the alert timing
sensitivity for the Forward Collision Alert system.
+ – Adjust Speed
When active, press the control bar up (+) or down (–) lightly to
increase or decrease the set speed by 1-mph increments; press
up or down fully to increase or decrease the set speed to the next
5-mph interval on the speedometer.
See Driving and Operating in your Owner Manual.
Heated Steering Wheel
On/Off
♦ Optional equipment
5
See Instruments and Controls in your Owner Manual.
STEERING WHEEL CONTROLS
INSTRUMENT CLUSTER
5-Way Control
Moves left/right, up/down,
and in.
Left/Right
Press to move between the
display zones on the
instrument cluster.
Press the left to exit a center
display menu.
B
A
Up/Down
Press the control bar up or down to scroll through a menu.
A
Performance configuration shown.
Cluster Display Zones
Use the 5-way control on the steering wheel to move between the
different display zones (A) and scroll through the different menus in
each cluster configuration.
SEL Select
Press to select a highlighted menu item.
See Instruments and Controls in your Owner Manual.
Cluster Configurations
1. Use the five-way control on the steering wheel to view the
Settings page (B) in one of the display zones on the cluster.
2.Press SEL (Select) to enter the Settings menu.
3. Scroll down to highlight Display Layout; press SEL.
4. Scroll up or down to highlight one of four cluster configurations:
Simple, Performance, Balanced, or Enhanced; press SEL.
5.Press to exit the menu.
Audio Controls
+ – Volume
Press the + or – to increase or decrease the volume.
Next/Previous
Press
or
to go to the next or previous favorite radio station
or track.
See your CUE Infotainment System Manual.
See Instruments and Controls in your Owner Manual.
6
DRIVER INFORMATION CENTER
HEAD-UP DISPLAY♦
The Driver Information Center (DIC) on the instrument cluster can
be set to display a variety of vehicle information.
The Head-Up Display (HUD) projects some operating information
onto the windshield. The HUD controls are located on the left side
of the instrument panel.
DIC Menus
Use the 5-way control on the steering wheel to view the menus:
Info – display trip and fuel information
Audio – browse music or change the audio source
Phone – view active call and scroll through contacts
Navigation – view active route or change prompts
Settings – select display settings
HUD
Lift up or press down to adjust the position of the image on the
windshield. It cannot be adjusted side-to-side.
HUD
INFO
Press to select from four displays: Speed View, Audio/Phone View,
Navigation View, and Performance View.
+–
Brightness
Lift up or press down to brighten or dim the display.
Hold down to turn off the display.
Info Menu
1. Use the 5-way control on the steering wheel to display the
Settings menu in one of the display zones. Press SEL to enter
the Settings menu.
2.Scroll
down to highlight Info Pages; press SEL.
3.Scroll
up or
down to move through the Info items.
4.Press SEL to select or deselect an item to display.
♦ Optional equipment
See Instruments and Controls in your Owner Manual.
See Instruments and Controls in your Owner Manual.
7
TOUCH SCREEN AND CONTROLS
Applications:
Touch the screen icon to
access the desired application.
Additional Pages:
Touch to view additional
pages of applications.
VOLUME:
Touch arrows or swipe finger
on or above the chrome bar.
Interaction Selector:
Touch to display the
favorites list.
Power/Mute:
Press and hold to turn CUE
On/Off. Press to mute audio.
Home Page
Passenger’s Temperature
Control
Driver’s Temperature
Control
Climate Control Fan Speed
OFF
Climate Control Power Off
Passenger’s Heated/
Cooled Seat Control
Driver’s Heated/
Cooled Seat Control
Recirculation Mode
AUTO:
Automatic Climate Control
Operation
Rear Window Defog
Defrost Mode
The controls use capacitive technology – simply touch the icon/text
to access a feature or adjust a function.
8
See your CUE Infotainment System Manual.
Storage Compartment
with USB Port:
Press and hold the bright
bar to open/close.
CUE SYSTEM MENUS
CUE offers a variety of entertainment, communication and vehicle system options. Touch an application icon on the touch screen to access
the following items. You can also use simple gestures on the CUE touch screen just as you would on a smartphone, such as tap, drag, pinch
and spread, to interact with the CUE system.
Audio
• Voice Recognition
• Radio Band
• Seek Up/Down
•Tune/Play
•Media
•Menu
Navigation
• Zoom Out
• Zoom In
•Overview
•Destination
• Map Menu
• Seek Up/Down
•Tune/Play
Phone
• Voice Recognition
•Contacts
•Recent
•Keypad
• Voice Mail
•Phones
9
Climate
• Driver/Vehicle Set
Temperature
• Passenger Set
Temperature
• Sync Driver
and Passenger
Temperature
Settings
• AC Mode
• Auto Climate On/Off
• Air Distribution
Settings
• Front Settings
• Rear Settings
• Fan Speed
Settings
• Time and Date
•Language
• Valet Mode
•Radio
•Vehicle
•Bluetooth
•Voice
•Display
• Rear Camera
• Return to Factory
Settings
See your CUE Infotainment System Manual.
CUE SYSTEM FEATURES
Refer to your Owner Manual for important safety information about using the infotainment system while driving.
CUE uses a Bluetooth or USB connection to link to a compatible device, such as a smartphone, cell phone, USB flash drive or portable
audio player/iPod®. It offers a variety of entertainment options, including streaming audio from the Internet through a smartphone, and features enhanced hands-free voice control, music information and the ability to play music files from a USB flash drive or an SD media card.
For assistance, call 1-855-4-CUE-NOW (1-855-428-3669) or visit www.cadillac.com/cue.
Setting the Time
1.Touch Settings on the Home page.
2.Touch Time and Date.
3.Touch Set Time.
4.Touch + or – to adjust the hours, minutes, and AM or PM.
5.Touch < BACK to exit the menu.
If the Auto Set feature is enabled, the time will be updated
­automatically as the system obtains time information from the
­cellular network.
Portable Audio Devices
Two USB ports, an SD media card slot, and an auxiliary audio
input jack are located in the center console storage compartment.
Two USB ports and an accessory power outlet also are located at
the front of the center console.
Connect an iPod®, iPhone®, MP3 player, a USB flash drive or a
USB mass storage device to a USB port or insert an SD media
card into the card slot.
Touch
Media until the connected device is shown. Search
for music on-screen or by voice commands.
Storing Favorites
Radio stations from all bands (AM, FM or XM♦), media (song, artist, album and genre with device connected to a USB port), phone
contacts and navigation destinations can be stored in any order.
1. Display or select the desired radio station, media favorite,
­navigation destination or contact.
2. Touch and drag up the Interaction Selector at the bottom
of the screen to display the favorite screen buttons.
3. Touch and hold a favorite screen button until a beep is heard.
4. Repeat the steps to store another favorite item.
PANDORA® Internet Radio
Listen to radio stations based on favorite artists or genres.
Requires an Internet-connected device with the Pandora app.
1. Download the Pandora app to your smartphone. Restart the
smartphone and sign in to Pandora.
2. Create a station on your smartphone to listen to a customized
song list in the vehicle.
3. Connect your smartphone/device to the system by Bluetooth or,
for Apple devices, by a USB cable.
4. Touch the Pandora icon on the touch screen to access
Pandora. A slight delay may occur when loading a song or
changing a station.
CD Player
Touch
Media until CD is displayed to play a disc.
10
See your CUE Infotainment System Manual.
VOICE RECOGNITION
BLUETOOTH ® SYSTEM
Control the music source and navigation destination, and make
phone calls hands-free (after pairing your Bluetooth-enabled
phone), using the voice recognition system.
1. Press the
Push to Talk button on the steering wheel.
2. The radio will say “Command please,” followed by a tone.
3. After the tone, say what you want it to do using natural speech.
(Example: "Call Amanda" or "Tune FM 104.3.")
Refer to your Owner Manual for important safety information about using
the Bluetooth system while driving.
Before using a Bluetooth-enabled device in the vehicle, it must be
paired with the in-vehicle Bluetooth system. The pairing process is
disabled when the vehicle is moving. Not all devices will support all
functions. For more information, visit www.gmtotalconnect.com.
Pair a Phone
1. To use voice recognition, press the
Push to Talk button;
after the tone, say “Pair Phone,” or
Use the touch screen to select
Phone > Pair Device.
2. Start the pairing process on the
phone. Locate Cadillac CUE on
the phone.
3. Enter the four-digit code that
appears on the touch screen into
the phone or, if a six-digit code
appears on the phone, confirm it
on the touch screen.
4. If your phone prompts you to accept the connection or phone
book download, click “yes” and always allow.
Handset Voice Recognition
Handset Voice Recognition pass-thru allows access to the voice
recognition commands on a compatible, paired cell phone; i.e.
Siri or Voice Command. For more information, visit
www.gmtotalconnect.com.
To activate Handset Voice Recognition, press and hold the
Push to Talk steering wheel button.
See your CUE Infotainment System Manual.
ONSTAR ® WITH 4G LTE
If equipped with OnStar 4G LTE and Wi-Fi®, up to seven devices
(smartphones, tablets and laptops) can be connected to highspeed Internet through the vehicle’s built-in Wi-Fi hotspot.
To retrieve the SSID and password for the hotspot, press the
OnStar Voice Command button on the rearview mirror, wait for
the prompt, and then say “Wi-Fi settings.” The information will
be displayed on the screen.
For more information and assistance, press the blue OnStar
­button, call 1-888-466-7827 or go to onstar.com.
Streaming Audio
With a paired device connected via Bluetooth, touch
Media
until Bluetooth is displayed on the touch screen to stream audio
from the device.
Control operation using the device controls. For full control of the
mobile device, it may be necessary to connect the device to a
USB port.
See your CUE Infotainment System Manual.
♦ Optional equipment
See your CUE Infotainment System Manual.
11
VEHICLE PERSONALIZATION
NAVIGATION
Many vehicle features can be customized in the Vehicle Settings
menu on the CUE touch screen.
1.Touch Settings on the Home page.
2.Touch Vehicle from the Settings menu.
3. Touch the desired menu item.
4. Touch the desired feature and setting. Settings are saved
­automatically.
5.Touch < Back to exit each menu.
Enter a destination using the Single Line Destination feature.
Approximate your desired destination and CUE’s auto-fill function
will enter the necessary information.
Using the Touch Screen
1.Touch Navigation on the Home page.
2.Touch Destination.
3. Type the address, intersection or road.
4.Touch Go.
5. Select the desired name from the generated list.
6.Touch Go.
See Instruments and Controls in your Owner Manual.
Using Voice Commands
1. Press the
Push to Talk button.
2. Say “Destination Address” to enter a specific address.
3. Say the entire address consisting of the house number, street
name, city and state.
12
See your CUE Infotainment System Manual.
LIGHTING
WINDSHIELD WIPERS
Off/On
Fast wipes
AUTO Automatic
Light Control
Automatically activates
the Daytime Running
Lamps (DRLs) or the
headlamps and other
exterior lamps depending on outside light
conditions, including
the IntelliBeam® automatic high-beam system♦.
Slow wipes
INT Intermittent
Rotate the band
to adjust the delay
between wipes. The
wipers activate more
often as the band is
rotated upward.
AUTO –
Rainsense™ On/Off
Parking Lamps
Press to turn the Rainsense wipers on/off. Use the
INT band
to adjust the wiper cycling based on the amount of moisture on
the windshield. Rotate the band upward to increase the moisture
sensitivity setting and the wipers will cycle more frequently.
Headlamps
Instrument Panel Brightness
Rotate the thumbwheel to adjust the instrument panel lighting.
OFF
Dome Lamps
Mist
OFF
Press to turn off the dome lamps at all
times, even when a door is open.
Washer Fluid
Push the paddle forward to wash the windshield.
DOOR
Press to have the dome lamps turn on
automatically when a door is open.
Rear
OFF-INT-ON
Slide the switch to activate the rear wiper.
Rear Washer Fluid
Press the button on the end of the lever.
ON
Press to turn on all dome lamps.
♦ Optional equipment
See Instruments and Controls in your Owner Manual.
See Lighting in your Owner Manual.
13
DRIVER ASSISTANCE SYSTEMS
The driver assistance systems use advanced technologies to help avoid collisions by providing visual, audible and/or tactile (vibration) alerts
under some imminent collision conditions.
Forward Collision Alert♦ – The
Vehicle Ahead indicator
illuminates in green on the instrument cluster when a vehicle is
detected and illuminates in yellow when following a vehicle ahead
too closely.
When approaching a vehicle directly ahead too rapidly, a visual
alert flashes on the windshield and the driver’s seat pulses. See
Safety Alert Seat.
Press the
Collision
Alert ­button (or the
­button if equipped with
Adaptive Cruise Control)
on the steering wheel to set
the alert sensitivity to Far,
Medium, Near or Off.
Lane Departure Warning♦ – When crossing a detected lane
marking without using a turn signal, the Lane Departure
Warning symbol flashes on the instrument cluster and the left or
right side of the driver’s seat pulses. See Safety Alert Seat.
To turn the system on or off, press the Lane Departure
Warning button on the right side of the CUE touch screen. The
button illuminates when the system is on.
Safety Alert Seat♦ – The driver’s seat pulses, left side, right side,
or simultaneously, to alert the driver of potential hazards.
Audible notification may be selected instead of Safety Alert Seat
pulsing notification. To change the alert setting, go to Settings >
Vehicle > Collision/Detection Systems > Alert Type.
Side Blind Zone Alert♦ – While driving, a
warning symbol
displays on the left or right side mirror when a vehicle is detected
in that side blind spot area. The symbol flashes if a turn signal is
activated when a vehicle has been detected.
To turn the system on or off, go to Settings > Vehicle >
Collision/Detection Systems > Side Blind Zone Alert.
Lane Change Alert♦ – While driving, a
warning symbol
displays on the left or right side mirror when a vehicle is rapidly
approaching that side blind zone area. The symbol flashes if a turn
signal is activated when a vehicle has been detected.
To turn the system on or off,
go to Settings > Vehicle >
Collision/Detection Systems >
Side Blind Zone Alert.
Front and Rear Automatic
Braking♦ – Applies the brakes
in potential collision situations
to help reduce damage or help
avoid collisions at lower speeds.
Automatic Collision Preparation♦ – Prepares the brakes or
applies the brakes if an emergency collision appears imminent or
the driver does not react to previous alerts.
Automatic Safety Belt Tightening♦ – While driving, the front
safety belts automatically tighten during emergency braking or
steering maneuvers, and release when driving conditions return
to normal.
See Driving and Operating in your Owner Manual.
14
REAR VISION CAMERA
AUTOMATIC TRANSMISSION
When the vehicle is in
Reverse, the Rear Vision
Camera displays a view of
the area behind the vehicle
on the CUE touch screen.
Range Selection Mode
Range Selection Mode allows the driver to select the range of
gears for the current driving conditions.
1. Move the shift lever to the Manual (M) position.
2. Press the + (plus) or – (minus) button (A) on the shift lever to
select a lower or higher gear. An M and the current gear will be
displayed on the Driver Information Center.
The transmission will be
limited to the gear selected
and lower gears. If vehicle
speed is too high or too low
B
for the requested gear, the
A
shift will not occur.
Rear Cross-Traffic Alert
When the vehicle is in
Reverse, the Rear CrossTraffic Alert system warns
of traffic coming in either
direction by displaying a visual alert on the CUE touch screen from
the Rear Vision Camera, and the left or right side of the driver’s
seat pulses. See Safety Alert Seat on page 14.
To turn the Rear Vision Camera Guidelines, Rear Park Assist
Symbols, or Rear Cross-Traffic Alert on or off, go to Settings >
Rear Camera.
Tow/Haul Mode
The Tow/Haul Mode
adjusts the transmission shifts to reduce shift
cycling, such as when towing or hauling heavy loads or driving on
steep grades.
• To turn the system on or off, press the
Tow/Haul Mode
button (B) on the end of the shift lever.
See Driving and Operating in your Owner Manual.
FRONT AND REAR PARKING ASSIST
During low-speed parking maneuvers, the system provides
“distance-to-closest object” information in the Driver Information
Center and a caution symbol on the Rear Vision Camera.
When the vehicle should be stopped immediately to avoid a
­collision, a continuous audible tone sounds or the Safety Alert Seat
pulses. See Safety Alert Seat on page 14.
To turn the system on or off, press the
Parking Assist
­button on the right side of the CUE touch screen.
♦ Optional equipment
See Driving and Operating in your Owner Manual.
See Driving and Operating in your Owner Manual.
15
STABILITRAK ® /TRACTION
CONTROL SYSTEMS
MAGNETIC RIDE CONTROL
The Magnetic Ride Control monitors
the suspension system and automatically adjusts to provide the best
­handling while providing a smooth ride.
Press the
Magnetic Ride
Control button on the left side of
the CUE touch screen to view the
menu on the Driver Information
Center. Use the 5-way Control on
the steering wheel to select the
Tour or Sport mode.
The Traction Control system limits wheelspin
and the StabiliTrak stability control system
assists with directional control of the vehicle
in difficult driving conditions. Both systems
turn on automatically every time the vehicle
is started.
Turn off Traction Control if the vehicle is
stuck and rocking the vehicle is required.
Press the Traction Control/
StabiliTrak OFF button on the right side of the CUE touch
screen to turn Traction Control off or back on. The Traction
Control Off light will illuminate on the instrument cluster when
the system is off.
See Driving and Operating in your Owner Manual.
TIRE PRESSURE MONITOR
See Driving and Operating in your Owner Manual.
The
Low Tire Pressure warning light on the instrument cluster
illuminates when one or more of the vehicle’s tires is significantly
underinflated. Fill the tires to the proper tire pressures. The proper
tire pressures for the vehicle are listed on the Tire and Loading
Information label, located below the driver’s door latch. Current
tire pressures can be viewed in the Driver Information Center.
Tire pressure is affected by cold weather and distance driven. If
the low tire pressure warning light illuminates when the vehicle is
first started in cooler temperatures and then turns off as the vehicle
is driven, check for the proper tire pressures.
COOL BOX♦
The Cool Box in the center console
provides cooled storage for beverages
or other items.
Press the Cool Box button on
the right side of the front ­storage
compartment to turn the Cool Box
on or off.
Refer to your Owner Manual for additional information about ­normal
monthly tire maintenance.
See Instruments and Controls in your Owner Manual.
See Vehicle Care in your Owner Manual.
16
POWER LIFTGATE
POWER ASSIST STEPS♦
Open/Close the Power Liftgate
Press the
Power
Liftgate button on the
RKE transmitter twice.
Press the Power
Liftgate knob on the
A
overhead console.
Press the touchpad (A)
on the liftgate handle
to open the liftgate.
Press the button (B)
next to the liftgate latch to close the liftgate.
The power assist steps lower automatically when a door is opened
and retract after the doors are closed.
To deploy the steps for cleaning and car washes, with the
­ignition on and the vehicle in Park or with the vehicle running
and in Neutral, press the
Power Assist Steps button on the
left side of the CUE touch screen. Press the button again to
retract the steps.
To lock/disable the steps or to unlock/enable the steps, with the
ignition on and the vehicle in Park or Neutral, press and hold
the
button for 4 seconds.
B
See Keys, Doors and Windows in your Owner Manual.
Programming the Liftgate Height
1. Turn the Power Liftgate knob to the 3/4 mode position.
2. Open the liftgate.
3. Adjust the liftgate manually to the
desired height.
4. To save the setting, press and hold the
button next to the liftgate latch (B)
for 3 seconds. The turn signals will flash
when the setting is saved.
SUNROOF♦
Open/Close the Sunroof
Press the rear of the
Sunroof Tilt
switch to vent the
­sunroof.
Fully press the rear of
the
Sunroof Slide
switch to express-open
the ­sunroof.
Fully press the front of
either
Sunroof switch to express-close the sunroof.
SLIDE
SLIDE
Hands-Free Operation
To open or close the liftgate hands-free, kick your foot straight
in and out under the center of the rear bumper. Do not swing
your foot side-to-side.
The RKE transmitter must be within 3 feet of the liftgate.
♦ Optional equipment
TILT
SLIDE
TILT
TILT
See Keys, Doors and Windows in your Owner Manual.
See Keys, Doors and Windows in your Owner Manual.
17
POWER FRONT SEATS
Seat Adjustments
A.Seat Cushion Adjustment
Move the front horizontal
­control to move the seat
A
forward or rearward, or to tilt,
raise or lower the seat.
B.Seatback Adjustment
Move the ­vertical control to
recline or raise the s­ eatback.
B C
C.Lumbar Adjustment
Move the rear control fore/aft to increase/decrease lumbar
­support or up/down to raise/lower the lumbar location.
Set Memory Positions
1. With the vehicle in Park, adjust
the power driver’s seat, power
adjustable pedals, power outside
mirrors, and power tilt/telescopic
steering column to the desired
positions.
2. Press and release the SET button
and then press and hold ­button 1
on the driver’s door until a beep sounds.
3. Repeat the steps using button 2 for a second driver.
Set Exit Position
1. Adjust the power driver’s seat, power adjustable pedals, and the
power tilt/tele­scopic steering column to the desired positions.
2. Press and release the SET button and then press and hold the
EXIT button on the driver’s door until a beep sounds.
Additional Seat Adjustments (Platinum Model)
D.Feature Select Control
Press and release the control
to display the seat adjustment
features on the CUE screen.
Press and hold to scroll
through the adjustments.
D
F
Recall Positions
With the ignition on and the vehicle in Park, press and release
button 1 or 2 or the
button to recall the stored position.
With the ignition off or when the vehicle is not in Park, press
and hold button 1 or 2 or the
button until the stored position
is reached. Releasing the button before the stored position is
reached stops the recall.
E.4-Way Control Pad
E
Use the 4-way control pad to
make adjustments up, down,
forward, or rearward to the selected feature.
Note: To change the memory recall and exit settings, go to Comfort and
Convenience in the Vehicle Settings menu.
F. Massage On/Off
With the ignition on, press to recall the last massage type and
intensity.
See Seats and Restraints in your Owner Manual.
18
REAR SEATS
Folding 2nd-Row Seats
The 2nd-row seats fold and tumble to provide more cargo space
and access to the 3rd-row seats.
1. Lower the head restraint, unbuckle the safety belt, make sure
nothing is under or
in front of the seat,
and move the front
seat forward enough
to allow room for the
folded seat.
2. Lift the lever on the
lower outboard side
of the 2nd-row seat.
The seatback will
fold ­forward.
3. Lift the lever again to
tumble the seat forward.
Power Folding 2nd-Row Seats♦
1. Lower the head
restraint, unbuckle
the safety belt, make
sure nothing is under
or in front of the seat,
and move the front
seat ­forward enough
to allow room for the
folded seat.
♦ Optional equipment
2. Press the
Seat Release button (A) on the panel behind the
rear doors or the x2 x2 button (B) in the rear cargo area to
fold the seat forward. Press either button again to tumble the
seat forward.
Unfolding 2nd-Row Seats
1. Pull down the seat until it latches to the floor.
2. Lift up the seatback until it locks in place.
Power Folding/Unfolding 3rd-Row Seats
1. With the vehicle in
Park, lower the head
restraint, unbuckle the
safety belt, and make
sure nothing is on
B
the seat.
2. Press and hold the
bottom of the
Seat
Release button (C) in
the rear cargo area to
fold the seat flat.
3. Press and hold the top
of the
button to raise the seatback.
A
C
See Seats and Restraints in your Owner Manual.
19
OWNER PRIVILEGES™
ROADSIDE ASSISTANCE 1-800-224-1400
TTY Users: 1-888-889-2438
Roadside Assistance provides every Cadillac owner with the
advantage of contacting a Cadillac advisor and, when appropriate, a Cadillac-trained dealer technician who can provide on-site
services, including towing service, battery jump-starting, lock-out
service, fuel delivery and flat tire assistance. Services are provided
for up to 6 years/70,000 miles, whichever occurs first.
Roadside Assistance and OnStar®: If you have a current OnStar
subscription, press the OnStar button and the vehicle will send
your current GPS location to an OnStar Advisor who will speak to
you, assess your problem, contact Roadside Assistance and relay
your exact location so you will get the help you need.
CUSTOMER ASSISTANCE 1-800-458-8006
Should you need to ask a question, make a comment, or request
additional information, Cadillac Customer Assistance is available
anytime.
MOBILE APPS
The myCadillac mobile app connects owners to a
variety of vehicle ­info­rmation and services, such as a
searchable Owner Manual, real-time fuel information
and Roadside Assistance.
OnStar RemoteLink Key Fob Services include Remote
Start, Remote Door Lock and Remote Horn and Lights
(on equipped vehicles). Services are available for five
years from date of vehicle delivery. To learn more about OnStar
services, press the OnStar button, refer to your Owner Manual, call
1-888-466-7827 or visit onstar.com.
Download the mobile apps from your compatible mobile device’s
app store.
CUE SUPPORT
For information or assistance operating the CUE infotainment
­system, call 1-885-4-CUE-NOW (1-855-428-3669).
CADILLAC ONLINE OWNER CENTER
Visit my.cadillac.com for access to the Cadillac Owner Center,
which features online owner manuals, maintenance information,
service records, and more.
We recommend always using ACDelco or genuine GM service parts.
Certain restrictions, precautions and safety procedures apply to your vehicle. Please read your Owner Manual for complete instructions. All information contained herein
is based on the latest information available at the time of printing and is subject to change without notice. Copyright 2014 by General Motors. All rights reserved.
!23133495=A!