Cadillac 2010 DTS Automobile User Manual

KODAK EASYSHARE
W820/W1020 Wireless
Digital Frames
Extended user guide
www.kodak.com
For help with your digital frame, www.kodak.com/go/digitalframesupport
Eastman Kodak Company
Rochester, New York 14650
© Eastman Kodak Company, 2008
All screen images are simulated.
Kodak and EasyShare are trademarks of Eastman Kodak Company.
Eastman Kodak Company is an authorized licensee of the CompactFlash trademark.
P/N 4H5172_en
Product features
Front View
1 LCD screen
1
2 Touch border (tap/slide)
3 Touch border (tap only)
4 Lights
5 Raised guide
3
4
2
5
NOTE: When screen icons appear,
lights turn on at touch-sensitive
points near the raised guide.
To use the touch border,
see page 3.
Back/Right View
1 Audio In
2 Audio Out
1
3 DC-In (12V)
4 Speakers (2)
2
4
3
www.kodak.com/go/support
i
Back/Side View
4
1
5
2
6
3
7
8
1 Power button
5
Volume button
2 Wall mounting holes
6
Memory card slot - CF, MD
3 Rotating/extending stand (see page 1) 7
USB connector (to camera/USB device)
4 Memory card slot - SD/SDHC, MMC,
MS, xD
USB connector (to computer)
ii
8
www.kodak.com/go/support
Table of contents
1
1 Getting started ......................................................................................1
Setting up your frame.................................................................................... 1
Turning on/off your frame.............................................................................. 2
Using your frame’s Quick Touch Borders ........................................................ 3
Setting your language ................................................................................... 4
Connecting to your wireless network ............................................................. 4
2 Setting up for wireless operation ..........................................................5
Connecting to your wireless network ............................................................. 5
Installing the software: WINDOWS OS only.................................................... 9
Verifying computer/device connections ........................................................ 10
3 Setting up Web content .......................................................................12
Setting up access to the Gallery and Web media .......................................... 12
Connecting to your Gallery account ............................................................. 16
Connecting to your FLICKR account ............................................................. 17
Connecting to your FRAMECHANNEL account ............................................. 18
Adding Web feeds....................................................................................... 19
Creating shortcuts on your frame................................................................. 25
Previewing, editing, and deleting feeds........................................................ 26
4 Viewing on your frame ........................................................................28
Enjoying your pictures immediately! ............................................................ 28
Inserting a memory card.............................................................................. 28
Connecting a digital camera or other USB device ......................................... 29
Viewing the Home screen............................................................................ 30
Accessing your pictures and videos .............................................................. 32
Viewing pictures and videos ........................................................................ 33
Playing a slide show.................................................................................... 35
Arranging pictures to play by date or filename ............................................. 36
5 Doing more with your frame ...............................................................37
www.kodak.com/go/support
iii
Table of contents
Playing music .............................................................................................. 37
Playing a video............................................................................................ 38
Printing pictures.......................................................................................... 39
Copying on your frame ................................................................................ 41
Deleting pictures ......................................................................................... 42
Selecting multiple pictures........................................................................... 43
6 Using wireless mode ...........................................................................44
What are the wireless features of my frame? ............................................... 44
Setting up your frame for wireless operation ................................................ 44
Wireless networking and the Internet .......................................................... 44
Viewing pictures/videos wirelessly ............................................................... 45
Viewing Gallery/Web media content on your frame ...................................... 46
Automatically receiving My Friends Albums.................................................. 49
Emailing pictures and videos from your frame .............................................. 51
Copying wirelessly to/from your computer.................................................... 53
7 Changing settings and more ...............................................................57
Changing frame settings ............................................................................. 57
Settings menus ........................................................................................... 57
Setting the clock and timer.......................................................................... 60
Upgrading your software and firmware........................................................ 62
Adding a matte and faceplate ..................................................................... 64
Mounting your frame on the wall ................................................................ 64
Changing your frame orientation ................................................................. 65
Maintaining your frame and mattes ............................................................. 66
Learning more about your frame.................................................................. 66
8 Troubleshooting and support ..............................................................67
Frequently asked questions ......................................................................... 67
Picture frame problems ............................................................................... 68
Picture frame/computer communications ..................................................... 70
Screen messages......................................................................................... 71
iv
www.kodak.com/go/support
Table of contents
9 Appendix .............................................................................................73
Digital frame specifications.......................................................................... 73
Important safety instructions ....................................................................... 75
Additional care and maintenance ................................................................ 76
Limited warranty ......................................................................................... 76
Regulatory compliance ................................................................................ 78
www.kodak.com/go/support
v
1
Getting started
Welcome to your KODAK EASYSHARE W820/W1020 Wireless Digital Frame. Viewing
your pictures couldn’t be simpler!
Setting up your frame
Setting up the stand
Your frame displays pictures in landscape
orientation, see page 65.
orientation. To change to portrait
Stand (pull to adjust the frame angle for best viewing)
2
When displayed with the
stand extended, the frame
rests at a 68-90 ° angle.
1
1
www.kodak.com/go/support
Getting started
Attaching the power cable
CAUTION:
Do not use this power cable with other devices, including digital
cameras.
Your power cable may look different from
the one pictured. Use the plug that
accommodates your type of power outlet.
1
2
Turning on/off your frame
Power button - press and hold (for about 2 seconds), then release.
With the power cable still
plugged in, your frame
retains information (like the
time) if you turn it off.
www.kodak.com/go/support
2
Getting started
Using your frame’s Quick Touch Borders
IMPORTANT: The display screen is not touch-sensitive. Do not touch it. Lights appear on
the borders (upper right and bottom) to show you where to touch.
CAUTION:
Only use your finger to touch the borders. Using sharp or metal
objects may damage the border or screen.
Tap lights next to
icons
(No sliding here)
Touch tips
Tap and slide on the Quick
Touch Borders* only.
Tap a border to
display the icons.
Tap Close to
dismiss them.
Tap the light
closest to an icon*
to select it.
Slide to highlight
menus, pictures,
videos, options.**
Tap OK to select
them.
Don’t hover,
borders can be
sensitive.
Home
Play slide show
Choose OK or
Done or
Close
Tap lights
below icons
Slide on
bottom border
only
Quick Touch
Borders
Slide to scroll:
Scroll through images—Like turning the pages of a book, slide left ← to go forward, slide right → to go back. For
faster scrolling through larger numbers of pictures, touch and hold (3 seconds), then slide to the end of the border.
Scroll through menus—Slide right → to scroll down, slide left ← to scroll up.
* Icons change color when they are selected.
** Tap below small arrows at the ends of the scroll bar to move the highlight one picture, menu, or item at a time.
3
www.kodak.com/go/support
Getting started
Setting your language
The language screen appears the first time you turn on your frame.
Slide (or tap below slider arrows) on the lights at
the bottom border to highlight your language, then
tap Save.
NOTE: Slide left/right on the lights to move up or down the list.
■
Save
To change the language at a later time:
Slider arrows
■
Tap
(Home) →
(Settings) → Language.
The language screen appears.
Slide to highlight your language, then tap Save.
To use the Quick Touch Borders, see page 3.
Connecting to your wireless network
After you set your language, your frame scans for available wireless networks. See
Connecting to your wireless network, page 5.
www.kodak.com/go/support
4
2
Setting up for wireless
operation
If you have problems with your wireless setup or connection, see
Troubleshooting starting on page 67. Or open EASYSHARE Digital Display Software
on your computer (see page 9) and click Tools → Wireless Troubleshooter. Follow the
automated troubleshooting wizard.
Connecting to your wireless network
To allow your frame to access the contents of your computer wirelessly, connect your
frame to your wireless home network.
NOTE: If you are not sure you have a wireless network, ask the person who set up your computer.
1 First time—If this is the first time you turned on your frame, tap the light next to
Save after you set your language (see page 4).
The Scanning for available wireless networks screen appears.
5
www.kodak.com/go/support
Setting up for wireless operation
Available wireless networks are listed.
NOTE:
If the scan finds multiple networks,
your home network (with the highest
% signal strength) is usually listed
first and highlighted. Tap OK.
Or, to select another network, slide or
tap below the arrows to highlight a
network, then tap OK.
Slider
Slider arrows
You can slide to highlight Exit without connecting, then tap OK (or tap Back) to
dismiss the screen and go to the Home screen (see page 30).
If you want to connect to your wireless home network later and start enjoying your
pictures now, insert a memory card. Or, connect a camera or other USB device with
pictures (see page 29).
Later—To connect to your wireless home network later:
a. Tap Home
→ Settings
.
b. Slide to highlight Network, then tap Select.
c. Highlight Scan for wireless networks, then tap OK.
d. Follow the screen prompts and continue with step 2 below.
www.kodak.com/go/support
6
Setting up for wireless operation
If your wireless network is not found:
a. Slide to highlight My network not shown, then select OK.
b. Check that your router is on and your frame is close to the router, then select
Scan again.
If your wireless network is still not found, your network does not broadcast SSIDs.
You then need to enter your network SSID (sometimes called the network name)
manually:
a. Select Enter SSID, then tap OK.
The on-screen keyboard appears.
b. Using the on-screen keyboard, enter the SSID in the text box, (see page 7). Tap
Done when finished.
The person who set up your network can help you with this information. Or, tap
Back then tap Help me connect for more information.
2 With your home network highlighted, tap OK to connect to your home network.
The Connecting (or the wireless network security screen, if enabled) appears.
Or, tap Exit to go to the Home screen without connecting. (See page 30.)
Enter security key (if you have wireless network security enabled)
You are prompted to enter your security key (WEP or WPA) using the on-screen
keyboard. Slide along the bottom of the touch border (or tap below the slider
arrows) to highlight a character, then tap
(Select) to enter it in the text box.
Tap Done when you are finished entering all the characters.
7
www.kodak.com/go/support
Setting up for wireless operation
Backspace - erases text
Done
Touch tips
Right border - tap only
Text box
Slider
Select
On the bottom border, keep
sliding (or tapping slider
arrows) left/right to go to the
previous or next row.
Slider arrows
If you do not have security enabled, go to step 3. (We recommend that you
enable your network security to prevent others from accessing your wireless home
network.)
NOTE: The screen identifies your security as either WEP or WPA.
A WEP security key can be either:
5 or 13 characters (0-9, A-Z, some special characters, case sensitive)
10 or 26 characters (0-9, A-F, not case sensitive).
A WPA key is 8-63 characters, case sensitive.
The person who set up your network can provide you with this information.
Congratulations! You have successfully connected your frame to your wireless network!
3 If you haven’t done so already, install the KODAK EASYSHARE Digital Display
Software on your WINDOWS OS computer (see page 9) so you can set up and
customize your frame right from your computer wirelessly. For MAC OS users, see
page 15.
4 Tap OK when you are done installing the software.
www.kodak.com/go/support
8
Setting up for wireless operation
Installing the software: WINDOWS OS only
IMPORTANT: For MAC OS users, do not install the software on your computer. See
page 15 to open your frame’s Device Settings page in your browser to start
setting access to Web content and customizing your frame.
The CD that was packaged with your frame contains two applications that work well
independently, but also work together for the best experience with your frame:
■
KODAK EASYSHARE Digital Display Software
—manage your frame right
from your computer, copy between your frame and computer (see page 53), and
set up your frame for access to KODAK Gallery and Web content (see page 12).
KODAK EASYSHARE Software
—organize, edit, and share your pictures.
IMPORTANT: We recommend that you install both. If you already have EASYSHARE
Software on your computer, upgrade to this special version for additional
features.
■
1 Insert the CD into your computer, then follow the
on-screen instructions to install the software.
■
CD packaged
with your frame.
Click Typical to install EASYSHARE Digital
Display Software and to update a previous
version of EASYSHARE Software.
If you do not have a previous version of
EASYSHARE Software on your computer, you
can click Custom and choose both applications
for a new installation.
The software icons appear on your desktop when the
installation is complete.
■
2 Double-click
to open EASYSHARE Digital
Display Software if it doesn’t open automatically.
When prompted, take a few minutes to electronically register your frame and software
for exclusive tips and offers. To register later, visit www.kodak.com/go/register.
9
www.kodak.com/go/support
Setting up for wireless operation
Verifying computer/device connections
Scanning to verify your wireless network connection gives your frame access to
content on your devices wirelessly.
After installing the software (see page 9), return to your frame then:
1 Tap OK.
The network connection setup screen appears.
Scan later
Scan now
If you forgot to install the software, tap Back then install the software (see
page 9). When you are done installing the software on your computer, tap OK on
your frame, then continue with step 2.
2 Tap Scan now to verify your computer connection.
The Scanning screen appears as the frame scans your network and then lists available
computers and other picture sources that your frame can access wirelessly.
You can select Scan later if you want to verify your connections later.
To verify your connections later, tap Home
→ Verify computer connection.
www.kodak.com/go/support
→ Settings
→ Network
10
Setting up for wireless operation
Help
Done
Exit
Scan again
3 If your computer is listed, your wireless connection is successful. Tap Done to close
the window.
If your computer is not listed, tap Scan again or tap Help for options.
You have completed the frame setup. Your frame can now access your host computer,
wirelessly. Your computer appears as a picture source icon
on your frame’s Home
screen (see page 30).
4 Tap
(Home) to start viewing your pictures.
NOTE: If you have more than one frame or device on your wireless network, give them unique names using
the on-screen keyboard so you can tell them apart. Go to Home → Settings → Device
configuration menu, (see page 59).
11
www.kodak.com/go/support
3
Setting up Web content
Setting up access to the Gallery and Web media
IMPORTANT: For Mac OS users, do not load the EASYSHARE Digital Display Software on
your computer. See page 15 to open your frame’s Device Settings page in
your browser to start setting access to Web content and customizing your
frame from your computer.
On your computer, use KODAK EASYSHARE Digital Display Software (see page 12) to
set up access to the KODAK Gallery and RSS (Really Simple Syndication) feeds such as
publicly posted images, news, weather, sports, finance, etc. Or, use the Settings option
to customize your frame right from your computer.
WINDOWS OS users
1 Make sure your frame and computer are connected to your wireless network (see
page 5) and your computer is connected to the Internet.
2 Click
on your desktop to open EASYSHARE Digital Display Software.
3 Select Enable media sharing to allow your frame to access pictures on your
computer, then click Next.
4 Select Yes, set up Web media to access Web content such as KODAK Gallery,
FLICKR, and FRAMECHANNEL, then click Next.
5 Click Device Settings next to the frame icon in the Drag and Drop Zone.
Your frame’s Device Settings page opens in your browser.
www.kodak.com/go/support
12
Setting up Web content
5
6
6 From the drop-down menu, select your frame.
7 Click the following Web Media pages for setup instructions to easily access
content right on your frame:
13
■
KODAK Gallery—connect to your existing Gallery account or set up a new one
to receive pictures from other Gallery friends and family. See page 16.
■
FLICKR—sign in to your existing FLICKR account or set up a new one (see
page 17) so you can receive and view FLICKR photos on your frame.
■
FRAMECHANNEL—add to your list of RSS photo feeds from FRAMECHANNEL
(see page 21) and receive photos from your favorite photo-sharing sites.
Connect to your existing FRAMECHANNEL account or set up a new one (see
page 21) so you can customize content such as news, weather, traffic, sports
scores, finance, and much more.
■
Photo RSS—add to your list of RSS photo feeds from FLICKR and other
favorite photo-sharing sites (see page 19).
■
Create shortcuts—create up to 5 shortcuts of your favorite photo feeds (see
page 25).
■
Settings—customize your frame with general settings, display settings, and
clock and timer settings right from your computer. (For more details about the
settings, see Changing settings and more, page 57.)
www.kodak.com/go/support
Setting up Web content
NOTE: Use the preview, edit, and delete features to manage your feed list quickly and easily (see page 26).
IMPORTANT: Make sure you click Save or Save to frame to save your entries.
Overview
KODAK Gallery
FLICKR
FRAMECHANNEL
Photo RSS
Save
Create shortcuts
Settings
Save to frame
www.kodak.com/go/support
14
Setting up Web content
MAC OS users
Instead of installing the software on your MACINTOSH Computer, open the Device
Settings page right from your browser and start setting up access to Web content and
customizing your frame from your computer.
1 Make sure the frame is connected to your wireless network (see page 5) and your
computer is connected to the Internet.
2 On the frame, tap Home
→ Settings
→ Network, then tap Select.
3 Retrieve the IP address (format: XXX.XXX.X.XXX) from the frame’s Network
Settings screen.
4 Open a browser (for example, INTERNET EXPLORER, MOZILLA FIREFOX, SAFARI,
etc.) on your computer.
5 Enter the IP address in the browser’s address window, then press Enter.
Enter the IP address here
The KODAK Displays and Devices Configuration page opens in your browser.
6 Go to step 7 on page 13 to start configuring your frame.
15
www.kodak.com/go/support
Setting up Web content
Connecting to your Gallery account
Perform this one-time setup on your frame to connect it to your existing KODAK
Gallery account.
1 Follow the steps on page 12 to access the Device Settings page.
2 Click the KODAK Gallery tab.
The KODAK Gallery Web Media configuration page appears.
3 If you don’t have a Gallery account, click Set one up now. Follow the on-screen
instructions, or visit www.kodakgallery.com, then continue with step 4.
4 Select your country/region from the drop-down menu.
2
3
Save
4
5
6
5 Enter the email address that is associated with your Gallery account, then enter
your Gallery password.
6 Select a Picture Mail automatic notification setting to receive pictures on your
frame from other Gallery members.
7 Click Save when you are finished.
Congratulations, you have completed your Gallery setup! KODAK Gallery is added
to the Web Media list on your frame’s Home screen (see page 30). To create a
KODAK Gallery shortcut on the Home screen, see page 25.
www.kodak.com/go/support
16
Setting up Web content
Connecting to your FLICKR account
To view your FLICKR photos on your digital frame, you need a FLICKR account.
1 Follow the steps on page 12 to access the Device Settings page.
2 Click the FLICKR tab.
The FLICKR Web Media configuration page appears.
3 If you don’t have a FLICKR account, click Set one up. Follow the on-screen
instructions to create an account.
4 If you have an account, click Sign in now.
The FLICKR authorization window appears if you logged into a valid account. You can
now click on the Photo RSS tab to view and add photo feeds (see page 19).
5 If you did not sign into a valid account and you want to change to a different
FLICKR account, click Unauthorize.
2
3
4
Sign in
confirmation
5
6 After setting up your FLICKR account, click OK, I’ll allow it so your frame can
access FLICKR photo feeds wirelessly.
You return to the FLICKR Web Media page with your sign in confirmation.
7 You can now view photo feeds from FLICKR (see page 46).
17
www.kodak.com/go/support
Setting up Web content
Connecting to your FRAMECHANNEL account
Creating an account links FRAMECHANNEL to your frame so you can view, create,
and manage additional customized feeds such as health, finance, and much more.
1 Follow the steps on page 12 to access the Device Settings page.
2 Click the FRAMECHANNEL tab.
The FRAMECHANNEL Web Media configuration page appears.
3 If you don’t have a FRAMECHANNEL account, click the link to create an account.
Follow the on-screen instructions.
2
3
4 When you are finished setting up your FRAMECHANNEL account, or if you already
have one, sign in, then enjoy the benefits of having an account:
■
access and customize free photo-sharing sites, and add them to your frame for
viewing
■
preview contents of your frame right on the FRAMECHANNEL page
■
view and manage your favorite photos and photo-sharing sites
www.kodak.com/go/support
18
Setting up Web content
Adding Web feeds
Set up your frame to view RSS (Really Simple Syndication) photo feeds directly from
FLICKR, FRAMECHANNEL, and other favorite sites.
IMPORTANT: Your frame can play only feeds that contain photos. An error message
appears when you try to play feeds that are text only. Make sure you
preview your feeds after they are added to the Web Media configuration
page where you can edit or delete them. See page 26.
NOTE: Preloaded feeds and new feeds are added to the Device Settings Web Media list (where you can
preview, edit, or delete them, see page 26). They appear also in the Web Media list on your frame’s
Home screen where you can play them (see page 30).
How to add a FLICKR feed
1 Follow the steps on page 12 to access the Device Settings page.
2 If you don’t have a FLICKR account, create one now (see page 17), then continue
with step 3 below.
3 Click the Photo RSS tab.
The Photo RSS/FLICKR Device Settings page appears with a list of preloaded FLICKR
feeds that are on your frame.
4 Click Add.
The Photo RSS/FLICKR Add/Edit page appears.
NOTE: You can edit preloaded feeds here (such as Flickr: Interesting photos) and feeds you add. (See
page 26.)
19
www.kodak.com/go/support
Setting up Web content
3
4
5
Save
6
7
5 In the Site drop-down menu, keep FLICKR as the default site.
6 Enter a tag (keyword) for the types of photos you want to see.
NOTE: FLICKR automatically sends pictures matching the tag (keyword) directly to your frame.
7 Click in the Photo feed name box to automatically assign the tag to the FLICKR
feed name.
8 Click Save.
Congratulations, you have completed your FLICKR photo feed setup! The feed
name is added to the list of feeds on the FLICKR configuration page and to the
Web Media
list on your frame’s Home screen. (See page 30.) To create a
shortcut of your feed on the Home screen, see page 25.
NOTE: Preview your feed to make sure it will play on your frame. (See page 26.)
www.kodak.com/go/support
20
Setting up Web content
How to add a FRAMECHANNEL feed
1 Follow the steps on page 12 to access the Device Settings page.
2 Click the FRAMECHANNEL tab.
The FRAMECHANNEL Web Media configuration page appears with a list of preloaded
FRAMECHANNEL feeds that are on your frame.
3 If you don’t have a FRAMECHANNEL account, click the link and follow the
on-screen instructions to create one.
IMPORTANT: Creating an account links FRAMECHANNEL to your frame so you can view,
create, and manage additional customized feeds such as sports scores,
health, finance, and much more. You can click the FRAMECHANNEL logo to
access these and other free photo-sharing sites for viewing right on your
frame.
4 Click Add.
The FRAMECHANNEL Add/Edit page appears.
21
www.kodak.com/go/support
Setting up Web content
FRAMECHANNEL logo
2
3
4
Save
5
6
5 From the Category drop-down menu, select the type of content you want to see
from FRAMECHANNEL (news, weather, sports, finance, etc.)
6 You can change the photo feed name (category included) that appears
automatically.
7 Click Save.
8 Congratulations, you have completed your FRAMECHANNEL photo feed setup!
Your feed is added to the list of FRAMECHANNEL feeds on the configuration page
and to the Web Media
list on your frame’s Home screen. (See page 30.) To
create a shortcut of your feed on the Home screen, see page 25.
NOTE: Preview your feed to make sure it will play on your frame. (See page 26.)
www.kodak.com/go/support
22
Setting up Web content
How to add feeds from other sites
1 Follow the steps on page 12 to access the Device Settings page.
2 Click the Photo RSS tab.
The Photo RSS/FLICKR Device Settings page appears with a list of preloaded feeds that
are on your frame.
3 Click Add.
The Photo RSS/FLICKR Add/Edit page appears.
NOTE: You can edit preloaded feeds here (such as Flickr: Interesting photos) and feeds you add from
other sites. (See page 26.)
2
3
4
6
7
4 From the Site drop-down menu, select Other.
5 In a new window on your computer, navigate to a photo RSS feed on the Internet.
6 Highlight the complete RSS feed URL in the address bar, then copy and paste it
into the URL box on the Web Media Add/Edit page.
7 Click in the Photo feed name box to automatically generate the feed name.
23
www.kodak.com/go/support
Setting up Web content
Change the name, if desired, by clicking the feed name and entering a new one.
8 Click Save.
Congratulations, you have completed your photo feed setup! The feed name is
added to the list of feeds on the Web Media Configuration page (see 7) and also in
the Web Media
list on your frame’s Home screen. (See page 30.) To create a
shortcut of your feed on the Home screen, see page 25.
NOTE: Preview your feed to make sure it will play on your frame. (See page 26.)
www.kodak.com/go/support
24
Setting up Web content
Creating shortcuts on your frame
Create up to five shortcuts to easily access your favorite Web media (such as KODAK
Gallery, FLICKR, and FRAMECHANNEL) right from your frame’s Home screen.
1 Follow the steps on page 12 to access the Device Settings page.
2 Click the Create Shortcuts tab.
The Web Media shortcut page appears with a list of photo feeds (including feeds you
create as shortcuts) that are on your frame.
2
3
3 Click the icon
next to the feed you want to create as a shortcut (five
shortcuts, maximum).
The icon is highlighted
and the shortcut to the feed immediately appears on the
Home screen (see page 30).
To remove a feed as a shortcut, click the highlighted icon to disable it.
The shortcut is removed from your frame’s Home screen.
Removing the shortcut only deletes the icon from the Home screen; it does not remove
the feed from the list or from the Web Media list on the frame’s Home screen.
25
www.kodak.com/go/support
Setting up Web content
Previewing, editing, and deleting feeds
Preview, edit, or delete feeds that are preloaded or that you add to the Web Media
configuration list to play on your frame.
IMPORTANT: Your frame plays only feeds that contain photos. An error message appears
when you try to play feeds that are text only. Make sure you preview your
feeds after they are added on the Device Settings Web Media page.
To preview a feed, click
configuration page.
To edit a feed, click
next to the feed name on the Web Media
next to the feed name.
■
For FLICKR feeds, the tag name is highlighted and the text is erased when you type
the first character of the new tag name.
■
For FRAMECHANNEL feeds, you can select another category or change the photo
feed name that is associated with the category.
To delete a feed, click
next to the feed name. A confirmation message
appears for the deletion. Click OK.
www.kodak.com/go/support
26
Setting up Web content
Preview
Edit
Delete
27
www.kodak.com/go/support
4
Viewing on your frame
Enjoying your pictures immediately!
■
To view your pictures or play a slide show,
insert a memory card, or connect a camera or other
USB device (see page 29).Your pictures play
automatically.
If your frame has pre-loaded sample pictures, they start
playing automatically.
To maximize your frame’s internal memory, delete
the pre-loaded samples. Access them on My Frame
(see page 30), then see page 42 to delete them.
If you are at the Home screen, see page 30 to start
your slide show. To change the order, see page 36.
Inserting a memory card
To insert a card (sold separately), push the
card firmly into the slot until it stops.
To remove a card from:
top card slot - push in the card to release it
side card slot - pull out the card
Secure Digital
Secure Digital High Capacity
MultiMedia Card
Memory Stick
xD
CompactFlash
MicroDrive
IMPORTANT: Do not insert a micro or mini memory card without an adapter.
www.kodak.com/go/support
28
Viewing on your frame
Connecting a digital camera or other USB device
USB devices: camera, flash
drive, card reader, computer,
etc. (sold separately)
29
USB cable
included with
your USB
www.kodak.com/go/support
Viewing on your frame
Viewing the Home screen
Start at the Home screen to:
■
access your pictures, videos, music, and preloaded FRAMECHANNEL photo feeds
such as news, weather, sports
■
view Web media content from KODAK Gallery, FLICKR, FRAMECHANNEL, and
other photo-sharing sites
■
customize your viewing through the Settings screens
If the icons are not visible, tap the
Quick Touch Borders.
Tap the border below one of the
icons along the bottom of the
screen.
Tap Close to dismiss the icons.
Home screen icons:
Pictures and videos (see Accessing your pictures and videos, page 32)
Music (see Playing music, page 37)
Web Media—list of all photo RSS feeds that are on your frame.
You can add new or edit preloaded feeds in the Web Media configuration pages (see
page 19).
www.kodak.com/go/support
30
Viewing on your frame
KODAK Gallery—appears if you set up access (see page 16) and create the Gallery as
a shortcut (see page 25). If you did not create a shortcut, find KODAK Gallery listed in
Web Media above. Display your Gallery albums and My Friends’ Albums. This icon
(
) indicates someone has shared pictures with you at the Gallery! See page 49.
FLICKR—preloaded (including Interesting photos from FLICKR) and new FLICKR feeds
you set up (see page 19).
FRAMECHANNEL—appears if you create shortcuts for FRAMECHANNEL feeds from
favorite photo-sharing sites (see page 21).
News— Preloaded feed from FRAMECHANNEL that you can manage or customize
(see page 21).
Weather—Preloaded feed from FRAMECHANNEL that you can manage or customize
(see page 21).
Sports—Preloaded feeds from FRAMECHANNEL that you can manage or customize
(see page 21).
Settings—customize frame settings such as viewing options, clock and timer,
verifying network connections, screen brightness, etc. For details, see page 57.
31
www.kodak.com/go/support
Viewing on your frame
Accessing your pictures and videos
1 Tap
(Home), then
(Pictures and
Videos).
All connected sources are displayed.
2 Slide or tap below the arrows to highlight a picture
source, then:
■
Tap
(Play slide show) on the right border to
start a slide show of the pictures in the
highlighted source.
Picture source icon
■
Or, tap OK to view thumbnails, folders, etc.
Picture sources:
Internal memory—the frame’s 512 MB internal memory. Copy your pictures into My
Frame from a memory card or other device.
Memory card—appears when you insert a card (see page 28). The label and icon
indicate the type of card.
Camera—appears when you connect a digital camera via USB cable (see page 29).
USB drive—appears when you insert a USB flash drive (see page 29).
Home computer—appears if you are connected to a wireless network computer (see
page 5). Display pictures that are stored on the computer.
My Slide show—appears when you save a favorite slide show source for quick access
anytime (see page 35).
www.kodak.com/go/support
32
Viewing on your frame
Viewing pictures and videos
View pictures and videos from the frame’s internal memory or any connected picture
source (see page 32).
IMPORTANT: For wireless access, make sure you set up your frame to work with your
wireless home network (see page 5). See also Viewing pictures/videos
wirelessly, page 45.
Viewing thumbnails (multi-up)
There are two ways to view your pictures as thumbnails:
■
Tap
(Home) →
(Pictures and Videos),
then select a picture source, (see page 32). Tap OK.
OR,
■
From a slide show (tap the touch border to display
the icons) or from single view, tap
(Thumbnails).
To navigate through the thumbnails, slide your finger left/right along the slider at the
bottom. To move even faster through the thumbnails, touch and hold until the screen
changes (about 3 seconds).
To play a folder of thumbnail (multi-up) images, highlight the folder then tap
(Play slide show).
33
www.kodak.com/go/support
Viewing on your frame
Viewing a single picture
■
To view a single, full-screen picture, highlight it in thumbnails view, then tap OK.
If a slide show is playing, tap the border (upper right or bottom) when the picture
appears, then tap
(Close) to hide the icons and lights and view full screen.
■
To magnify a picture up to 8X, tap
(Actions), then tap
(Zoom). Slide
under the zoom bar from left to right towards the plus (+) sign. To view other parts
of the magnified picture, tap the arrows
. To return to 1X, slide from right
to left towards the minus (-) sign.
NOTE: The zoom level depends on image size. You can zoom more with larger images.
■
To rotate a picture, tap
(Actions), then keep tapping
(Rotate) until
you get the desired orientation.
www.kodak.com/go/support
34
Viewing on your frame
Playing a slide show
There are two ways to start a slide show on your frame:
■
Insert a card or connect a USB device—a new slide show starts automatically,
replacing a currently running slide show or single view picture.
Highlight a picture folder in thumbnails view (see page 33), or highlight a picture
source on the Pictures and Videos screen, then tap
(Play slide show).
NOTE: Music and videos in the same picture source play automatically during a slide show.
To add music to a slide show, see page 37.
■
Other slide show information
– A slide show plays continuously until you tap a Quick Touch Border to stop it or
turn off the frame.
– While viewing a slide show, you can change your slide show settings. Tap a Quick
Touch Border to display the icons, then tap
(Slide show options) to see the
settings. For more details about the settings, see page 58.
– Set your frame to play sound from a captured video, or play music (if available and
selected) when videos are played. See Audio priority in Settings, page 57.
Saving your favorite slide show for easy access
Save access to favorite pictures as My Slide show. While viewing a slide show:
■
Tap a Quick Touch Border to pause the slide show and to display the screen icons.
■
Tap
(Slide show options) → Save as My Slide show. Tap Yes to confirm.
NOTE: My Slide show plays automatically when you turn on your frame. The My Slide show icon
appears on the Pictures and Videos screen as a picture source, (see page 32).
35
www.kodak.com/go/support
Viewing on your frame
Arranging pictures to play by date or filename
The pictures on your frame are arranged and played by date, starting with the oldest.
You can play the arrangement or order by date, newest to oldest, or alphabetically by
filename.
To change the sort order:
1 While viewing a slide show, tap a border to display the icons, then tap
show options).
(Slide
2 Highlight Sort, then tap Select.
3 Highlight a sort order:
-Filename, A to Z
-Filename, Z to A
-Date, oldest to newest
-Date, newest to oldest
4 Tap Save.
www.kodak.com/go/support
36
5
Doing more with your frame
Playing music
1 Tap
(Home), then
(Music). Slide to
highlight a music source then tap OK.
2 Slide to the right/left to move up/down the music
source list, then tap OK.
Play/Pause button
3 Slide right/left to go to the previous/next song, or
tap Select all, then tap the Play button on the
bottom of the border to start playing music.
Tap
(Audio Options) at the bottom to turn on/off Shuffle Play and to set Audio
Priority. For more details, see page 57.
4 Tap
(Play slide show) on the right border to return to your slide show.
NOTE: Music plays automatically when a memory card or USB device with music on it is connected. To
prevent music from playing automatically, tap Home > Settings > Viewing Options > Music
auto-play > Off.
Notes on playing, copying, deleting music:
■
To add background music while a slide show is playing, touch the border to display
the icons. Tap
(Slide show options) > Background music, then tap Select.
■
A headphone jack is available on the side of the frame (see page i).
■
Adjust the frame volume with the Volume button (see page ii). The on-screen
volume indicator appears in the upper right corner.
37
www.kodak.com/go/support
Doing more with your frame
■
To copy or delete music files (MP3), highlight the songs in the music source, then
(Actions) → Copy or Delete → OK.
tap
-To copy, tap under the destination icon where you want to copy your music.
-To delete, tap Yes to confirm the deletion.
■
To copy music files (MP3) from your computer to your frame’s internal memory,
drag and drop them from your computer. See Copying wirelessly to/from your
computer, page 53.
Playing a video
■
During a slide show, videos play automatically. When the video ends, the slide
show advances to the next picture or video. To play a video from thumbnails view,
highlight a video thumbnail, then tap OK.
■
Videos in thumbnail view:
– MOV videos are indicated with
.
– AVI, MPEG, and MPG videos display the first frame.
■
Video control icons (on bottom border):
play, pause, and resume the video.
rewind / fast forward.
or
stop the video and return to thumbnails.
NOTE: HD (high definition) video files are not supported. Video formats created with digital cameras are
certified for KODAK Digital Frames. Videos created with or copied from other sources may not play
on your frame.
NOTE: To play the audio portion of a video while you are playing music, change the Audio priority in
Viewing options, (see page 57).
www.kodak.com/go/support
38
Doing more with your frame
Printing pictures
NOTE: The print icon is available on your frame when you connect your printer.
Your frame is compatible with PICTBRIDGE Technology, so you can print directly to
PICTBRIDGE enabled Printers.
1 Turn off the frame and printer.
2 Make sure your frame is disconnected from the
printer.
3 Turn on the frame, then change your connection
mode on your frame from Computer to Printer. See
page 40.
4 Reconnect your frame to the printer, using the USB
cable.
Printing to a PictBridge enabled Printer
1 Turn on the printer. Turn on the frame.
2 From a slide show (tap the touch-sensitive border to pause the slide show and
display the icons) or from single view:
■
Tap
(Actions), then
(Print).
Printing of the displayed picture begins.
If you are in thumbnails (multi-up) view:
■
Slide to select a picture, or see page 43 to select multiple pictures.
■
Tap
(Actions).
If you selected multiple pictures to print, the pictures and number of selected pictures
appear on the screen.
Tap
(Print), then Yes to start printing all selected pictures.
NOTE: Remember to change your connection mode back to Computer when you are done (see page 40).
■
39
www.kodak.com/go/support
Doing more with your frame
Manually changing USB connection mode
The connection mode must match the device you connect the frame to: Computer or
Printer. The default is Connect to computer. You can change the connection mode
manually.
1 Disconnect the printer or computer from the frame.
2 On the frame, tap
3 Tap
(Home).
(Settings).
4 Slide to highlight Device configuration, then tap Select.
5 Highlight USB connection mode, then tap Select.
6 Slide to highlight the mode you want to connect to, printer or computer, then tap
Save.
7 Reconnect the device (printer or computer) that matches the connection mode in
step 6.
www.kodak.com/go/support
40
Doing more with your frame
Copying on your frame
Copy pictures from your current viewing location to other connected devices (see
page 29).
CAUTION:
Removing a card or disconnecting a device while copying may
damage your card, pictures, or device.
1 Highlight a picture to copy:
In thumbnails view, slide or tap below the slider
arrows to find a picture; or, display a picture in
single view (see page 33).
2 Tap
3 Tap
(Actions).
(Copy).
4 Tap under the destination icon where you want to
copy your picture.
The picture is copied.
5 Tap Close to dismiss the screen.
To copy multiple pictures, see page 43.
NOTE: To copy wirelessly between your frame and computer, see page 53.
41
www.kodak.com/go/support
Doing more with your frame
Deleting pictures
CAUTION:
Removing a card or disconnecting a device while deleting may
damage your card, pictures, or device.
1 Highlight a picture to delete:
In thumbnails view, slide or tap below the slider
arrows to find a picture; or, display a picture in
single view (see page 34).
2 Tap
(Actions).
3 Tap
(Delete), then tap Yes to confirm.
The picture is deleted.
4 Tap Close to dismiss the screen.
To delete multiple pictures, see page 43.
www.kodak.com/go/support
42
Doing more with your frame
Selecting multiple pictures
Use the multi-select feature to copy or delete two or more pictures or to play a slide
show of selected pictures.
1 In thumbnails view (see page 33), slide or tap below the slider arrows to find a
picture, then tap
(Select).
A check mark appears on the selected picture.
2 Continue selecting pictures.
To remove a check mark, tap
(Unselect) while the picture is highlighted.
Select/Unselect all
Select all
■
In thumbnails view (see page 33), tap
(Select All).
Unselect all
■
To remove all check marks, tap Unselect All
.
43
www.kodak.com/go/support
6
Using wireless mode
For more information on wireless setup, operation, and networks, see Setting up for
wireless operation, page 5 or visit www.kodak.com/go/wifisupport or www.wi-fi.org.
What are the wireless features of my frame?
Connect to your home wireless network and:
■
Display pictures on your frame directly from your computer hard drive (see
page 45).
■
Display Web content you set up (see page 46).
■
Display pictures from your KODAK Gallery account (see page 47).
■
Automatically receive pictures from your friends and family at the Gallery (see
page 49).
■
Copy pictures wirelessly from your frame to your computer (see page 53).
■
Automatically upgrade your firmware from the Internet (see page 63).
Setting up your frame for wireless operation
See Installing the software: WINDOWS OS only, page 9 and Connecting to your
wireless network, page 5 for detailed instructions about your software application
and setting up your frame.
Do you have security enabled on your wireless network? If so, have your network
name and security key (WEP or WPA) available. (See page 7.)
Wireless networking and the Internet
Some wireless functions on your frame, including viewing pictures on KODAK Gallery
(see page 47), require access to the Internet.
www.kodak.com/go/support
44
Using wireless mode
Viewing pictures/videos wirelessly
Wirelessly view pictures and videos from your computer right on your frame using the
KODAK EASYSHARE Digital Display Software.
Before you proceed:
1 Make sure you install the software packaged with your frame (see page 9).
Connect to your wireless home network (see page 5), then verify your computer
connection (see page 10).
Your frame can now access the content on your host computer, wirelessly. Your
computer appears as a picture source icon
on your frame (see page 30).
NOTE: If you have more than one frame on your wireless network, give them unique names using the
on-screen keyboard so you can tell them apart. Go to Home → Settings → Device configuration
menu. (See page 59.)
2 On your frame, tap
(Home) →
(Pictures and Videos).
3 Highlight your home computer (
), then tap OK.
It may take up to 10 seconds for your Network
Computer to appear on the Home screen.
If your network computer is not listed on the Home
screen, go to troubleshooting help on page 67.
NOTE: The first time you connect, a message may appear on your computer screen alerting you to a new
device. Follow the prompts to "allow" the frame on your computer.
4 Highlight the category of pictures (such as Pictures and Videos, StoryShare Albums,
and New Picture Chronicles) that you want to view, then tap OK.
All Pictures and Videos displays every picture and video that your computer is sharing,
without showing folders. The categories are established by the EASYSHARE Digital
Display Software (see page 53).
45
www.kodak.com/go/support
Using wireless mode
5 Pictures are displayed as thumbnails. See
Chapter 4, Viewing on your frame for all the ways
you can enjoy your pictures, videos, and music on
your frame.
Viewing Gallery/Web media content on your frame
■
Play slide shows of KODAK Gallery albums (see page 47).
■
Play slide shows of photo RSS (Really Simple Syndication) preloaded feeds or ones
you set up (see page 48).
■
Receive pictures from your friends and family at the Gallery (see page 49).
1 See page 12 to set up your frame for Web access.
2 Tap
(Home) to display the Home screen.
3 Tap one of these Web sources:
Web Media—list of all the RSS photo feeds that are on your frame.
You can add new or edit preloaded feeds in the Web Media configuration pages (see
page 19).
KODAK Gallery—appears if you connect to your Gallery account (see page 16) and
create a shortcut (see page 25). If you did not create a shortcut, find KODAK Gallery
listed in Web Media above. Display your Gallery albums and My Friends’ Albums. This
icon (
) indicates someone has shared pictures with you at the Gallery!
See page 49.
FLICKR—preloaded (including Interesting photos from FLICKR) and new FLICKR feeds
you set up (see page 19).
www.kodak.com/go/support
46
Using wireless mode
FRAMECHANNEL—appears if you create shortcuts for FRAMECHANNEL feeds from
favorite photo-sharing sites (see page 21).
News— Preloaded feed from FRAMECHANNEL that you can manage or customize
(see page 21).
Weather—Preloaded feed from FRAMECHANNEL that you can manage or customize
(see page 21).
Sports—Preloaded feeds from FRAMECHANNEL that you can manage or customize
(see page 21).
Viewing KODAK Gallery pictures
View Gallery pictures and albums wirelessly right on your frame.
IMPORTANT: First, set up access to KODAK Gallery. See page 12.
NOTE: Connection to KODAK Gallery is currently limited to customers in the United States, Canada, and
Europe.
To see all pictures from the Gallery:
1 Tap
(Home) →
(KODAK Gallery), if you created a Gallery shortcut (see
page 25). Otherwise, on the Home screen, tap
(Web Media) → KODAK
Gallery → Select.
2 Highlight Your Album, then tap OK.
3 Highlight Play all, then tap OK to see the pictures as thumbnails. Or, tap
(Play
slide show) to view them as a slide show.
See page 28 for all the ways you can enjoy your Gallery pictures on your frame.
NOTE: Features not supported from the Gallery at this time: viewing videos, printing and deleting pictures.
47
www.kodak.com/go/support
Using wireless mode
Viewing Web feeds on your frame
Wirelessly view preloaded RSS feeds or feeds you set up (see page 19) of frequently
changing Web content such as FLICKR or FRAMECHANNEL public photos, news,
weather, sports, finance, etc.
1 From the Home screen, tap a shortcut feed you set up (see page 25) or a
preloaded one such as News, Weather, and Sports (see page 30).
The slide show begins.
Or,
■
tap
(Web Media)
■
slide to highlight the type of feed (such as FLICKR, FRAMECHANNEL, or other
Photo RSS feeds), then tap Select
■
slide to highlight a photo feed, then tap
(Play slide show) to play it
2 To pause a slide show and display the icons, tap a touch-sensitive area on the
borders (upper right or bottom) during the slide show.
To hide the icons and lights and view the full screen, tap
(Close).
To restart the slide show, tap a touch-sensitive area on the borders (upper right or
bottom) to display the icons, then tap
(Play slide show).
www.kodak.com/go/support
48
Using wireless mode
Automatically receiving My Friends Albums
Your wireless frame uses KODAK’s Picture Mail feature to notify you automatically
when a friend shares pictures with you at the KODAK Gallery. Play a slide show of the
new pictures, right on your frame, even before you see the email on your computer!
To see the shared pictures right away:
■
When the notice
appears on the frame screen,
tap below View now.
A slide show of the new pictures plays on your frame.
If there are multiple albums you haven’t viewed yet,
select a marked album
from the Gallery list and
tap OK.
To see the shared pictures later:
1 When the notice
appears on the frame screen,
slide to choose Dismiss.
2 To see the new pictures, tap
(Home) →
(KODAK Gallery), if you created a Gallery shortcut
(see page 25). Otherwise, on the Home screen, tap
(Web Media) → KODAK Gallery → Select.
3 With My Friends’ Albums highlighted, tap OK.
4 To view a My Friends album as a slide show,
highlight the album, then tap
(Play slide
show). Or, tap OK to see the pictures as thumbnails.
49
www.kodak.com/go/support
Using wireless mode
Turning off auto-receive and notification
You can turn off auto-receive and/or notification from your friends’ albums at the
Gallery from the Home screen (see below) or from the Device Settings page (see
page 12).
1 Tap Home
, Settings
, then tap OK.
2 Tap KODAK Gallery, then tap Select.
3 Highlight Picture Mail, then tap Select.
4 Choose from these options:
Auto-receive with notification ON—(default) you automatically receive your
friends’ albums and the notice appears on the frame.
Auto-receive ON—you automatically receive your friends’ albums, but the
notice does not appear on the frame. You know when your friends send you
pictures because the email icon still appears on the KODAK Gallery on the Home
screen
and on unviewed My Friends’ Albums in your Gallery account
.
Auto-receive OFF—you don’t automatically receive your friends’ albums on
your frame. To view them, see Viewing KODAK Gallery pictures, page 47.
www.kodak.com/go/support
50
Using wireless mode
Emailing pictures and videos from your frame
Select pictures or an album on your frame then share them wirelessly via Email. First,
add the person’s email address to your share list and assign an optional nickname.
IMPORTANT: Make sure you install the software that came with your frame (see page 9)
and connect your frame to your wireless home network (see page 5).
Adding a new email address
1 Choose a picture source then tap
2 Tap
(Actions).
(Share) → Add name.
3 Use the keyboard to enter the email address, then tap Save.
Enter the email address
Slide along the bottom of the touch border (or tap the slider arrows) to highlight a
character then tap
(Select). The character appears in the text box. Tap Save
when you are finished.
Backspace erases text
Text box
Save
Select
Shift - changes
keyboard keys
Slider
Slider arrows
4 Assign a nickname to the new email address (optional).
51
www.kodak.com/go/support
Using wireless mode
Sharing your pictures
1 Highlight a picture to share:
In thumbnails view (see page 33), slide or tap below the slider arrows to find a
picture; or, display a picture in single view (see page 34).
2 Tap
3 Tap
(Actions).
(Share).
A list of email addresses and nicknames you created appear. The album name and
number of pictures to share are also displayed.
4 Slide to highlight an email address. Or, tap Add name to add a new email address
to your share list (see page 51).
5 Tap
(Share).
To send the pictures to more than one address, highlight each address then tap
(Select). Tap
(Select all) to send to everyone on your list.
A progress bar of the number of shared pictures and the upload destination appears. If
the destination is your Gallery account, the entire album is uploaded.
www.kodak.com/go/support
52
Using wireless mode
Copying wirelessly to/from your computer
The KODAK EASYSHARE Digital Display Software (included on the CD that was
packaged with your frame) lets you drag and drop (copy) pictures, videos, and music
wirelessly between your frame and computer or other connected devices (see
page 29).
Before you proceed:
1 Make sure you install the software packaged with your frame (see page 9).
Connect to your wireless home network (see page 5), then verify your computer
connection (see page 10).
Your frame can now access the content on your host computer, wirelessly.
NOTE: If you have more than one frame on your wireless network, give them unique names so you can tell
them apart. Go to Home → Settings → Device configuration menu. (See page 59.)
2 Make sure the USB connection mode on your frame is set to Computer (see
page 40).
3 Double-click
(KODAK EASYSHARE Digital Display Software icon) on your
desktop to open the software.
The frame, memory card, and connected devices (see page 29) appear in the Drag and
Drop Zone.
53
www.kodak.com/go/support
Using wireless mode
Click Help
for more
info
Select pictures
here (Viewer
Pane)
Drag and drop
here (Drag and
Drop Zone)
Click here to
create a slide
show
Pictures/videos
on your
computer
Music
My Devices:
- your wireless
frame
- connected USB
devices
4 Click My Devices to see the folders on your frame and connected devices (see
page 29).
The frame appears as removable drives—one drive for each picture source on the
frame’s picture source: internal memory (My Frame), and any inserted memory cards or
connected devices.
5 Click Pictures and Videos or My Devices to find the pictures, videos, etc. you want
to copy.
6 In the Viewer pane, select the pictures, videos, etc., then drag and drop them to
the new location in the Drag and Drop Zone (for example, the frame’s internal
memory, a memory card, computer, or connected USB device).
7 Go to the copy location to view your copied pictures, videos, etc. or to play a slide
show on your frame.
www.kodak.com/go/support
54
Using wireless mode
NOTE: The slide show order of play for available sources is: memory card, USB device, internal memory.
NOTE: To maintain the slide show order during playback, see page 36 and select Filename, A - Z.
Copying pictures from EASYSHARE Software
It’s easy to copy pictures/videos from My Collection to your frame.
1 Install the software that came with your frame (see page 9).
2 Set the USB connection mode to Computer (see page 40).
3 Double-click
software.
(KODAK EASYSHARE Software) on your desktop to open the
4 Click My Collection, then select the pictures in the Viewer pane. Drag and drop
them into the Picture tray.
5 In the menu bar, select File → Copy to.
The frame appears as removable drives—one drive for each connected picture source in
the frame: internal memory, memory cards, USB devices.
My Collection
Select pictures here
Drag and drop to here (Picture tray)
6 Browse to the frame location to which you are copying.
55
www.kodak.com/go/support
Using wireless mode
7 Select Best For Digital Picture Frame to resize the picture you are copying. Full
resolution is unnecessary and quickly fills up the frame’s memory.
8 Click Copy. Pictures are copied to your frame.
9 Go to the copy location to view your copied pictures on your frame and to play a
slide show.
www.kodak.com/go/support
56
7
Changing settings and more
Changing frame settings
The options in the Settings menu let you customize and configure your frame.
1 Tap
(Home), then
(Settings).
2 Slide or tap below the slider arrows to highlight a setting, then tap Select.
IMPORTANT: You may need to keep sliding to see a complete list of available options.
3 Follow the on-screen instructions. Tap Save to accept your selections.
4 Tap
(Back) to exit.
Settings menus
Setting
Options
Upgrade firmware
Upgrade firmware—load the latest version of firmware on
This option is only displayed if your frame (see page 62).
the upgrade file (.img) is
Exit—return to the Home screen.
available on the frame
(memory card, flash drive,
internal memory, etc.).
57
www.kodak.com/go/support
Changing settings and more
Setting
Options
Viewing options
Sort—available during a slide show only (see page 36).
Background music—available during a slide show only (see
page 37).
Slide duration—specify how long each picture is displayed
in a slide show, from 3 seconds to 1 hour. (The default is 5
seconds.)
Transitions—specify the transition style between pictures in
a slide show. See screen for options. The default is Random.
Shuffle—plays the images in random order.
Slide show starting point—when pictures are sorted from
oldest to newest (see page 36), specify where a slide show
starts automatically (from picture dated 1 week back, or from
oldest picture).
Brightness—slide to adjust the screen brightness according
to your lighting conditions.
Frame orientation—display your frame in landscape
(default)
or portrait orientation.
Screen Fit or Fill—
Fit entire image
(default). Show the entire picture.
Black borders may appear around the image.
Fill the screen
.The picture fills the entire screen; some
of the picture may be cut off (cropped).
Music auto-play—choose to play music automatically
during a slide show. (Music files must be in the same location
as your pictures.)
Audio priority—when you are playing music (see page 37),
choose whether or not to play the audio portion of a video.
Play music (default). Music continues to play, video plays but
its audio is muted. Play video soundtrack. Music stops
playing while the video, with audio, plays.
www.kodak.com/go/support
58
Changing settings and more
Setting
Options
Clock and timer
On/Off schedule—set your frame to turn on and off at a
specified time every day (see page 61).
Set time—manually set the clock to the current time (see
page 60).
KODAK Gallery
Specify your country, email address, and password.
First, install the software (see page 9) and set up access to the
KODAK Gallery (see page 12).
Network
Set up your frame for wireless operation. See page 5.
Device configuration
Frame name—use the on-screen keyboard to assign a name
to your frame. This name is referenced when connecting to
your wireless network. If you have more than one frame on
your wireless network, give them unique names so you can tell
them apart.
RSS feeds—simple sites you set up to view on your frame
using the Digital Display Software. Edit RSS feeds from your
computer using the software. See page 26.
Frame connections—choose how your frame works with
other devices. Share frame content: choose to turn off or
allow devices (such as computers or other wireless frames) to
access your frame contents; Remote setup: specify whether
or not to allow your frame to be set up from your computer;
Remote copy: turn off or allow copying to your frame from
your computer; Remote copy destination: specify a default
destination on your frame (internal memory, SD card, etc.) to
save your copied pictures.
USB connection mode—before you connect a USB
computer or printer, choose Connect to computer (default)
or Connect to printer. See page 40.
Language
Choose your language (see page 4).
59
www.kodak.com/go/support
Changing settings and more
Setting
Options
Automatic resizing
Choose to turn on or off automatic resizing of your pictures
when copying. Full resolution is unnecessary for viewing and
quickly fills up the frame’s memory. Choose full resolution for
printing.
About
Check your frame model, serial number, and firmware version.
Setting the clock and timer
Manually setting the clock
1 Tap
(Home), then
(Settings).
2 Highlight Clock and timer, then tap Select.
3 Highlight Set time, then tap Select.
4 Slide to set the hour. Tap the Next arrow to highlight the next setting (minutes),
then slide to adjust it.
5 Tap Save to accept your changes.
Getting the time from the Internet
1 Make sure your frame and computer are connected to your wireless network (see
page 5) and your computer is connected to the Internet.
2 On your frame, tap
(Home), then
(Settings).
3 Highlight Clock and timer, then tap Select.
4 Highlight Get time from Internet, then tap Select.
5 Highlight Turn on, then tap Select.
6 Highlight a Time Zone, then tap Save to accept your changes.
www.kodak.com/go/support
60
Changing settings and more
Setting automatic on/off
Set your frame to turn on and off at a specified time every day.
NOTE: Set the clock before enabling auto on/off.
1 Tap
(Home), then
(Settings).
2 Highlight Clock and timer, then tap Select.
3 Highlight On/Off schedule, then tap Select.
The current time is displayed and the hour field is highlighted.
4 Set the Turn on time. Slide to adjust the hour. Tap the Next arrow to highlight the
next setting (minutes), then slide to adjust it. Repeat to set Turn off time.
NOTE: Make sure the on time is earlier than the off time or the frame turns off itself at unspecified times.
5 Tap Enable, then Save when you’re done.
Your frame will now automatically turn on and off at the times you specified.
If your frame loses power, the clock time returns to the factory setting and the
automatic on/off times, if set, are disabled. To reset the clock and re-enable your
on/off times, see Resetting the clock after losing power, page 70.
61
www.kodak.com/go/support
Changing settings and more
Upgrading your software and firmware
Upgrade to the latest versions of the software included on the CD that was packaged
with your frame (see page 9). Firmware is the software that runs on your frame. To
check for the latest version, visit www.kodak.com/go/digitalframedownloads.
Manually upgrade firmware
Download the firmware to your computer, then upgrade your frame:
1 On your computer, go to www.kodak.com/go/digitalframedownloads.
2 Follow the screen directions to download the frame firmware to your computer.
3 Copy the IMG file to the top level folder (root directory) of a memory card or USB
flash drive, then insert into the frame. See page 41 for copying files.
4 Tap
(Home), then
(Settings).
5 Highlight Firmware Upgrade, then tap OK to begin the upgrade.
IMPORTANT: Do not turn off the frame or remove the memory card or USB flash drive
during the upgrade!
When the upgrade is complete, your frame automatically restarts. If it doesn’t, press the
power button on the frame to Off, then back to On.
www.kodak.com/go/support
62
Changing settings and more
Automatically upgrade firmware from the Internet
When the frame is connected to your wireless network, you can automatically
upgrade the firmware from the Internet whenever a new version is available.
For the latest features and best experience with your frame, upgrade your firmware
from the Internet whenever the new firmware upgrade message appears.
For more information about your frame’s new features, explore the EASYSHARE
Digital Display Software on your computer or in Web Media on your frame’s Home
screen (see page 30).
Upgrade right away
Install now—Select, then press OK to start the upgrade.
When the upgrade is complete, your frame automatically restarts. If it doesn’t, press the
power switch on the frame to Off, then back to On.
IMPORTANT: Do not turn off the frame during the upgrade!
■
Upgrade later
■
■
63
Remind me later—Select, then press OK.
The upgrade message disappears, then appears again the next time you turn on the
frame.
No thanks—Select, then press OK.
The upgrade message disappears. To change your mind and upgrade to this version, see
Manually upgrade firmware, page 62.
A new message appears when the next firmware version is available.
www.kodak.com/go/support
Changing settings and more
Adding a matte and faceplate
Customize your frame with a decorative matte and/or faceplate (packaged with some
frames). Additional mattes and faceplates are available for purchase (see page 66).
Frame
When you are not using the
matte, reapply it to the liner
and store in a plastic bag to
keep the adhesive backing
clean.
Matte
Faceplate
Mounting your frame on the wall
Use wall-anchoring hardware (not included) to anchor your frame securely to your
wall.
Wall mounting
holes
Clip (use to reroute, secure, and
center the power cable)
Power cable
To change to portrait orientation, turn your frame
90° and use the wall mounting holes at the top.
www.kodak.com/go/support
64
Changing settings and more
Changing your frame orientation
Change the frame orientation setting if you change to portrait
orientation.
Change the stand position and angle:
Rotate the stand 90 °, then pull it out or push it in to adjust
the frame angle.
NOTE: When displayed with the stand extended, the frame rests at a
68-90 ° angle.
■
Change the frame orientation setting:
(Settings).
1 Tap
(Home) →
2 Slide to highlight
OK.
(Viewing options), then tap
3 Slide to highlight Frame orientation, then tap OK.
4 Slide to highlight Portrait, then tap OK
5 Tap
to exit.
Your frame is set up now to display pictures in portrait
orientation.
65
www.kodak.com/go/support
Changing settings and more
Maintaining your frame and mattes
IMPORTANT: Always disconnect the power before cleaning. Do not use water, cleaning
solutions, or other adhesives on the frame or any of its parts.
Gently wipe the frame, LCD, or matte with a clean, dry, lint-free cloth (included). For
fingerprints on the frame, apply light pressure.
Learning more about your frame
www.kodak.com/go/digitalframes
Purchase frame accessories, including decorative
faceplates and custom mattes
www.kodak.com/go/digitalframesupport Extended user guide
Interactive troubleshooting and repairs
Interactive tutorials
Frequently asked questions
Downloads
Product registration
www.kodak.com/go/support
66
8
Troubleshooting and support
For step-by-step product support, visit www.kodak.com/go/digitalframesupport and
select Interactive Troubleshooting & Repairs.
Frequently asked questions
I already have KODAK EASYSHARE Software on my computer. Do I have to
install it again?
The CD that was packaged with your frame contains a special version of EASYSHARE
Software that lets your computer share pictures with your frame. Install it to upgrade
to this special software version, see page 9.
I lost my Internet connection in the middle of my setup. What should I do?
Reconnect to the Internet and repeat the installation and setup, starting on page 9.
I can’t find my network. Why?
■
Is your network set up to broadcast SSID? If so, you must enter your wireless
network information manually. The person who set up your network can help you
with this information.
■
Does your network have security enabled (WEP or WPA)? (See page 8.)
I can’t find my network computer. Why?
■
Make sure your router and your computer are on.
■
Make sure your computer is on your wireless network. See the documentation that
came with your router and your computer.
■
Is your frame allowed to share content with your computer? See page 12.
67
www.kodak.com/go/support
Troubleshooting and support
I didn’t connect to my network the first time I turned on my frame. Can I
do it now?
Yes, you can.
1 Tap Home
→ Settings
. Slide to highlight Network, then tap Select.
2 Highlight Scan for wireless networks, then tap OK.
3 Continue with step 1 on page 5.
Picture frame problems
If...
Try one or more of the following
Frame cannot connect ■ Make sure you have a wireless router and that it is broadcasting
the SSID, or enter the SSID manually.
to the wireless network
—“Wireless network ■ Make sure you are within the operating range of the network.
Move the frame into the same room with the router.
not found” appears.
■ Make sure your frame is using the latest firmware. Check
www.kodak.com/go/digitalframesupport for updates.
■ If your network security is enabled (See page 8), enter your security
key (WEP or WPA). The person who set up your network can help
you with this information.
Frame does not
turn on.
■ Make sure the power cable that was included with your frame is
connected securely (see page 2).
■ Unplug the power cable for 5 seconds, then reconnect the cable.
Press and hold the power button (for about 2 seconds), then
release.
www.kodak.com/go/support
68
Troubleshooting and support
If...
Try one or more of the following
Nothing happens when ■ Insert a certified SD/MMC/MS/xD/CF/MD Card with images into
the designated card slot, then push to seat it (see page 28). In the
a memory card, camera,
top card slot, make sure the card is seated flush with the top.
or USB device is
■
Make
sure the USB cable that was included with your camera or
connected.
USB device is connected securely (see page 29).
■ Make sure the file format of your pictures and videos are
supported. (See page 73).
NOTE: Do not insert a SANDISK Memory Stick, PRO DUO Card or other micro or mini
memory card without an adapter.
NOTE: Pictures may take a longer time to display when: the picture/video files are
large; when using a large capacity memory card or other connected device.
Touch border doesn’t
work.
■ Use your finger to make your selections on the touch-sensitive
borders (see page 3). Lights on the border show you where to
touch.
IMPORTANT: Do not slide on the right border (tap only).
■ Unplug the power cable for 5 seconds, then reconnect the cable.
Press and hold the power button (for about 2 seconds), then
release.
■ Unplug the power cable from the frame. Wait 5 seconds, then
Frame freezes up or
reconnect the cable. Press and hold the power button (for about 2
doesn’t work properly.
seconds), then release.
■ Press the Volume and Power buttons at the top of the frame (see
page ii) at the same time, then tap Yes to reset the frame.
(Resetting your frame does not erase your saved files.)
Music doesn’t play.
■ Make sure the volume is turned up (see page ii).
■ If your frame has songs you purchased, they may be protected files.
Convert the files to standard (unprotected) AAC or MP3 formats.
■ Make sure you Enabled the on/off setting after you set the times,
You set automatic
then press OK (not Back). See page 61.
on/off but the frame
doesn’t turn on and off ■ If your frame loses power, the clock returns to the factory setting
and auto on/off times are disabled. See Resetting the clock after
at the specified times.
losing power, page 70.
69
www.kodak.com/go/support
Troubleshooting and support
Resetting the clock after losing power
If you turn off the power on the frame or otherwise lose power for half a day or more,
the clock time returns to the factory setting and the automatic on/off times, if set, are
disabled.
■
When you turn the frame back on, the set time screen appears on the frame.
■
Slide to set the hour. Tap the left/right arrows to highlight the previous or next
setting (hour and minutes), then slide to adjust the setting.
Tap OK.
The Home screen appears. The time is reset and the automatic on/off times (if set) are
re-enabled. It is not necessary to reset the on/off times.
NOTE: If you exit the set time screen without setting the time, you can manually reset the clock and
re-enable the automatic on/off times (see page 61). It is not necessary to reset the on/off times.
■
Picture frame/computer communications
If...
Try one or more of the following
Cannot copy pictures to my ■ Make sure your frame and computer are on.
computer.
■ Make sure to install the software that was packaged with
your frame (see page 9) and copy pictures between your
Cannot see my frame as a
frame and computer using the EASYSHARE Digital Display
removable drive.
Software (see page 53).
■ Make sure the power button on the frame is On (see
page ii).
Cannot copy pictures from
KODAK EASYSHARE
Software.
■ Make sure your frame and computer are on.
■ Make sure to install the software that was packaged with
your frame (see page 9).
■ From My Collection in EASYSHARE Software, make sure the
pictures are in the Picture Tray.
www.kodak.com/go/support
70
Troubleshooting and support
If...
Try one or more of the following
Cannot copy pictures from
one device to another even
though the copy destination
is not full.
Storage devices that have FAT (File Allocation Table) 16
formatting can only store up to 512 files in its top level folder
(root directory). To make sure all your pictures copy properly,
format the copy destination to FAT32 before copying to it:
Caution: Formatting deletes all pictures and videos,
including protected files.
1 Connect the device to your computer.
2 Open My Computer and locate the device.
3 Right-click on it and choose Format.
4 From the File system drop-down menu, choose FAT32 then
click Start.
Screen messages
Screen message
Try one or more of the following
Create file failed.
The device (memory card, USB drive, camera, etc.) you are
trying to copy to is protected.
■ See your device documentation to remove write
protection.
■ Insert or connect a different device.
Printer unavailable.
Unable to connect to printer.
■ Make sure your printer is on and the USB cable is
Printing error.
■ Make sure your printer is on and the USB cable is
securely connected (see page 39).
■ Make sure you changed your USB connection mode
from computer to printer (see page 40).
securely connected (see page 39).
■ Check your printer for more info.
Time out occurred while printing. ■ Check cables and printer supplies. Print again.
71
www.kodak.com/go/support
Troubleshooting and support
Screen message
Try one or more of the following
Write failed. Select another
location.
The frame was unable to copy the picture.
■ Insert a different card or device (see page 28).
Unable to create file. Device write The frame was unable to copy the picture.
protected or full.
■ Insert a different card or device (see page 28).
Disk full.
■ Remove write protection, unlock card.
■ Delete pictures from card.
Error attempting to open file or
directory.
■ Turn off the frame, then turn it back on. Press and
Error duplicate filename.
Error occurred while closing a file.
hold the power button (for about 2 seconds), then
release. If the problem persists, contact customer
support help, at
www.kodak.com/go/digitalframesupport.
Error invalid filename
Error reading from file.
Error writing from file.
Error writing a file.
Error writing to a file.
File Copy Failed!
Internal error.
Parameter is invalid.
Unknown error.
www.kodak.com/go/support
72
9
Appendix
Digital frame specifications
For more specifications, visit www.kodak.com/go/digitalframesupport.
KODAK EASYSHARE W820/W1020 Wireless Digital Frames
Color display
W820
20.3 cm (8 in.) diagonal digital LCD, 800 x 480 pixels, 4:3 or 16:9 aspect
ratio, 17.6 x 10 cm (6.9 x 3.9 in.) viewable area
W1020
25.4 cm (10 in.) diagonal digital LCD, 800 x 480 pixels, 16:9 aspect ratio,
23.5 x 14.6 cm (9.3 x 5.8 in.) viewable area
Internal storage capacity
W820, W1020
512 MB
Power
Leader Electronics Inc. AC adapter, model MU18-2120150-A1, 12-volt, 1.5 amp.
Europe: Phihong AC adapter, model PSA 18R-120P
(See page 75 for more information.)
Communication with computer
USB 1.0 cable
Wi-Fi wireless network compatibility
W820, W1020
Yes
Other features
PICTBRIDGE
Support
73
Yes
www.kodak.com/go/support
Appendix
KODAK EASYSHARE W820/W1020 Wireless Digital Frames
Picture formats
JPEG, JPG, EXIF 2.2
Video formats
MOV, AVI, MPG, MPEG
NOTE: HD (High Definition) is not supported on your frame. Video formats created
with digital cameras are certified for KODAK Digital Frames. Videos created
with or copied from other sources may not play on your frame.
Music format
MP3
Memory cards
MMC (MULTIMEDIA Card); SD/SDHC (SECURE DIGITAL/SECURE DIGITAL
HIGH CAPACITY); MEMORY STICK, xD; CF; MD
Tripod mount
1/4 inch
Temperature
Operating: 32 to 122°F (0 to 50°C)
Storage: -4 to 140°F (-20 to 60°C)
Size
W820: 28.5 x 21 x 3.8 cm (11.2 x 8.3 x 1.5 in.)
W1020: 33 x 24 x 3.8 cm (13 x 9.5 x 1.5 in.)
www.kodak.com/go/support
74
Appendix
Important safety instructions
CAUTION:
Do not disassemble this product; there are no user-serviceable
parts inside. Refer servicing to qualified service personnel. Do not
expose this product to liquid, moisture, or extreme temperatures.
The use of controls, adjustments, or procedures other than those
specified herein may result in exposure to shock and/or electrical
or mechanical hazards. If the LCD breaks, do not touch the glass
or liquid. Contact Kodak customer support.
CAUTION:
When using this product, it should be installed and operated with
a minimum distance of 7.9 in. (20 cm) for 2.4 GHz operations
between the radiator and your body. This transmitter must not be
collocated or operate in conjunction with any other antenna or
transmitter.
■
The use of an accessory that is not recommended by Kodak may cause fire, electric
shock, or injury. For approved accessories, visit www.kodak/go/accessories.
■
Use only a Leader Electronics Inc. AC adapter, model MU18-2120150-A1, 12-volt,
1.5 amp.
In Europe, use only a Phihong AC adapter, model PSA 18R-120P.
Use of other AC adapters may damage the frame and void your warranties.
■
Use only a USB-certified computer equipped with a current-limiting motherboard.
Contact your computer manufacturer if you have questions.
When displayed with the stand extended, the frame rests at a 68 - 90 degree
angle.
Do not place frame near naked flame sources such as lighted candles or heaters.
■
■
■
75
Excessive sound pressure from earphones and headphones may cause hearing
loss.
www.kodak.com/go/support
Appendix
Additional care and maintenance
■
Wipe the frame and the LCD gently with a soft, lint-free cloth (included). Do not
use cleaning solutions unless designed specifically for LCD screens. Do not allow
chemicals, such as suntan lotion, to contact painted surfaces.
■
Service agreements are available in some countries. Contact a dealer of Kodak
products for more information.
■
For digital frame disposal or recycling information, contact your local authorities. In
the US, visit the Electronics Industry Alliance Web site at www.eiae.org or visit
www.kodak.com/go/digitalframesupport.
Limited warranty
Kodak warrants Kodak consumer electronic products and accessories (“Products”),
excluding batteries, to be free from malfunctions and defects in both materials and
workmanship for one year from the date of purchase. Retain the original dated sales
receipt. Proof of the date of purchase will be required with any request for warranty
repair.
Limited warranty coverage
Warranty service is only available from within the country where the Products were
originally purchased. You may be required to ship Products, at your expense, to the
authorized service facility for the country where the Products were purchased. Kodak
will repair or replace Products if they fail to function properly during the warranty
period, subject to any conditions and/or limitations stated herein. Warranty service
will include all labor as well as any necessary adjustments and/or replacement parts. If
Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the
purchase price paid for the Product provided the Product has been returned to Kodak
along with proof of the purchase price paid. Repair, replacement, or refund of the
purchase price are the sole remedies under the warranty. If replacement parts are
used in making repairs, those parts may be remanufactured, or may contain
remanufactured materials. If it is necessary to replace the entire Product, it may be
replaced with a remanufactured Product. Remanufactured Products, parts and
www.kodak.com/go/support
76
Appendix
materials are warranted for the remaining warranty term of the original Product, or 90
days after the date of repair or replacement, whichever is longer.
Limitations
This warranty does not cover circumstances beyond Kodak's control. This warranty
does not apply when failure is due to shipping damage, accident, alteration,
modification, unauthorized service, misuse, abuse, use with incompatible accessories
or attachments (such as third party ink or ink tanks), failure to follow Kodak 's
operation, maintenance or repacking instructions, failure to use items supplied by
Kodak (such as adapters and cables), or claims made after the duration of this
warranty. Kodak makes no other express or implied warranty for this product, and
disclaims the implied warranties of merchantability and fitness for a particular
purpose. In the event that the exclusion of any implied warranty is ineffective under
the law, the duration of the implied warranty will be one year from the purchase date
or such longer period as required by law. The option of repair, replacement, or refund
is Kodak's only obligation. Kodak will not be responsible for any special,
consequential or incidental damages resulting from the sale, purchase, or use of this
product regardless of the cause. Liability for any special, consequential or incidental
damages (including but not limited to loss of revenue or profit, downtime costs, loss
of the use of the equipment, cost of substitute equipment, facilities or services, or
claims of your customers for such damages resulting from the purchase use or failure
of the Product), regardless of cause or for breach of any written or implied warranty is
expressly disclaimed.
77
www.kodak.com/go/support
Appendix
Your rights
Some states or jurisdictions do not allow exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
Some states or jurisdictions do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you. This warranty gives you specific
rights, and you may have other rights which vary from state to state or by jurisdiction.
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of
this warranty may be different. Unless a specific Kodak warranty is communicated to
the purchaser in writing by a Kodak company, no warranty or liability exists beyond
any minimum requirements imposed by law, even though defect, damage, or loss may
be by negligence or other act.
Regulatory compliance
FCC compliance and advisory
KODAK EASYSHARE W820/W1020 Wireless Digital Frames
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed or used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures: 1) reorient
www.kodak.com/go/support
78
Appendix
or relocate the receiving antenna; 2) increase the separation between the equipment
and the receiver; 3) connect the equipment to an outlet on a circuit different from that
to which the receiver is connected; 4) consult the dealer or an experienced radio/TV
technician for additional suggestions.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Where shielded
interface cables have been provided with the product or specified additional
components or accessories elsewhere defined to be used with the installation of the
product, they must be used in order to ensure compliance with FCC regulation.
FCC and Industry Canada
This device complies with Industry Canada RSS-210 and FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Canadian DOC statement
DOC Class B Compliance—This Class B digital apparatus complies with Canadian
ICES-003.
Observation des normes-Classe B—Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
79
www.kodak.com/go/support
Appendix
Hereby, Eastman Kodak Company declares that this Kodak product is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
This digital picture frame (W820 or W1020) transmits in 10 dBm. In France, the power
level is limited to 10dBm in outdoor environments, per regulations. When in France,
use the wireless functions of this device indoors only.
Waste Electrical and Electronic Equipment labeling
EU: It is the final user’s responsibility to discard this equipment into an
approved, segregated collection scheme to enable its suitable
treatment/disposal and to improve human/environmental protection. For
more information, see your retailer, local authority, or
www.kodak.com/go/recycle.
Australian C-Tick
N137
MPEG-4
Use of this product in any manner that complies with the MPEG-4 visual standard is
prohibited, except for use by a consumer engaging in personal and non-commercial
activities.
www.kodak.com/go/support
80
Appendix
Russian GOST-R
Eastman Kodak Company
Rochester, New York 14650
China RoHS
81
www.kodak.com/go/support
Appendix
Korean Class B ITE
Licensing
Supply of this product does not convey a license nor imply any right to distribute
content created with this product in revenue-generating broadcast systems
(terrestrial, satellite, cable and/or other distribution channels), streaming applications
(via Internet, intranets and/or other networks), other content distribution systems
(pay-audio or audio-on-demand applications and the like) or on physical media
(compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards
and the like). An independent license for such use is required. For details, please visit
http://mp3licensing.com.
Notice
When this digital frame is connected to a wireless network, it is possible to view
images and other content directly from the Internet.
Eastman Kodak Company, its subsidiaries and affiliates do not control and are not
responsible for any content displayed or viewed.
www.kodak.com/go/support
82
1
Index
A
about, frame, 60
appendix, 73
automatic on/off, 59, 61
E
EASYSHARE Software
copying pictures from, 55
error messages, 71
B
battery
safety, 75
button
macro/landscape, ii
F
fast forward video, 38
firmware
checking version, 60
upgrading, 57
flash drive, connecting, 29
frame, picture
changing orientation, 1
checking model, firmware, serial
number, 60
setup, 1
specifications, 73
troubleshooting, 68
C
cables
USB, connecting, 29
camera, connecting, 29
changing picture locations, 32
clock and timer, setting, 59, 60, 61
computer
copying to/from, 53
help with communicating, 70
connection mode, 40
copying
from EASYSHARE Software, 55
to/from computer, USB, 53
D
deleting pictures and videos, 42
displaying slide show, 35
disposal, recycling, 76
doing more with your frame, 37
83
H
help
communicating with computer, 70
frame, 68
home
changing picture locations, 32
screen, 32
I
internal memory
capacity, 73
internet
requirements for wireless, 44
www.kodak.com/go/support
Index
L
landscape, set orientation, 58
language
setting, 59, 60
setting first time, 4
M
MAC OS users, 15
macro/landscape button, ii
multi-up view, 33
O
on/off, setting auto, 59, 61
orientation setting, 1, 58
P
PICTBRIDGE enabled Printer, 39
pictures
copying connected, 53
copying from EASYSHARE
Software, 55
deleting, 42
location, changing, 32
selecting more than one, 43
play/pause, video, 38
portrait, set orientation, 58
power
specifications, 73
printer connection mode, 40
printing, PICTBRIDGE Printer, 39
R
recycling, disposal, 76
regulatory compliance, 78
rewind video, 38
www.kodak.com/go/support
running slide show, 35
S
safety information, 75
screen
cleaning, 76
error messages, 71
selecting multiple pictures, 43
serial number, checking, 60
setting
auto on/off, 59, 61
language, 59, 60
language first time, 4
time, 59
viewing options, 58
wireless operation, 44
setup
picture frame, 1
wireless network, 44
slide duration, setting, 58
slide show
running, 35
slide transitions, setting, 58
source, picture location, 32
specifications, frame, 73
stop
video, 38
storage capacity, internal memory, 73
T
thumb drive. See flash drive., 29
thumbnails, 33
time, setting, 59
transitions, slides, setting, 58
84
Index
troubleshooting
error messages, 71
frame, 68
U
upgrading
firmware, 57
USB connection mode, 40
USB device, connecting, 29
V
viewing
pictures, wireless network, 45
thumbnails, 33
W
warranty, 76
wireless
features on frame, overview, 44
setup, 44
viewing pictures, 45
85
www.kodak.com/go/support