Owner`s manual | Califone 2385AV-02 CD Player User Manual

Products for Excellence in Education™
Digital 2300AV Series
featuring CD, CD-R, and CD-RW Compatibility
Model 2385AV-02
CALIFONE INTERNATIONAL, INC.
Chatsworth, CA 91311
www.califone.com
Model 2395AV-02
Owner’s Manual
Models 2385AV-02/2395AV-02
Tape running is unstable.
Is there excessive slack in the tape?
There is excessive noise, the sound
quivers or there are breaks in the sound.
Are the tape heads dirty?
CAUTION
RISK OF ELECTRIC SHOCK - DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
within a triangle is intended to
tell the user that parts inside the
product are a risk of electric shock
to persons.
This product is not designed to
function normally in strong electromagnetic fields. Consequently, the
audio quality may degrade while the
product is exposed to strong electromagnetic fields. Normal audio quality
operation will be recovered when the strong
electromagnetic field is no longer present.
The exclamation point within a
triangle is intended to tell the
user that important operating and
servicing instructions are in the
papers with the appliance.
WARNING: TO REDUCE THE
RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN
OR MOISTURE.
Ce produit n’est pas conçu pour un
fonctionnement dans de forts
champs électromagnétiques. Par
conséquent, la qualité sonore peut
diminuer si ce produit est exposé à
un fort champ életromagnétique. La qualité
sonore redeviendra normale après affaiblissement du champ électromagnétique.
IMPORTANT SAFETY INSTRUCTIONS
ATTENTION: ALL SAFETY AND OPERATING INSTRUCTIONS
SHOULD BE READ BEFORE OPERATING APPLIANCE. ALL
OPERATING AND USE INSTRUCTIONS SHOULD BE FOLLOWED
WHEN OPERATING THE APPLIANCE. HEED AND ADHERE TO
ALL WARNINGS ON THE APPLIANCE AND IN THE OPERATING
INSTRUCTIONS. RETAIN ALL SAFETY AND OPERATING
INSTRUCTIONS FOR FUTURE REFERENCE.
Recording
The RECORD key cannot be depressed.
Recording cannot be done.
Are the heads dirty?
The previous recording cannot be erased.
Is the erasure head dirty?
Is the tape type other than type 1 normal bias?
No sound output.
Is the master volume turned up?
CD
CD play does not begin.
POWER CORD PROTECTION - POWER SUPPLY CORDS
SHOULD BE ROUTED SO THAT THEY ARE NOT LIKELY TO BE
WALKED ON OR PINCHED BY ITEMS PLACED UPON OR
AGAINST THEM, PAYING PARTICULAR ATTENTION TO CORDS
AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT
WHERE THEY EXIT FROM THE APPLIANCE.
CLEANING - THE APPLIANCE SHOULD BE CLEANED ONLY AS
RECOMMENDED BY THE MANUFACTURER.
WATER & MOISTURE - DO NOT USE THE APPLIANCE NEAR
WATER; IE. BATHTUB, WASHBOWL, KITCHEN SINK, LAUNDRY
TUB, WET BASEMENT OR SWIMMING POOL.
NON USE PERIODS - UNPLUG THE APPLIANCE POWER
CORD FROM THE OUTLET WHEN LEFT UNUSED FOR A
LONG PERIOD OF TIME.
VENTILATION - DO NOT SITUATE THE APPLIANCE SO THAT
ITS LOCATION OR POSITION INTERFERES WITH ITS PROPER
VENTILATION. FOR EXAMPLE, THE APPLIANCE SHOULD NOT
BE SITUATED ON A BED, SOFA, RUG OR SIMILAR SURFACE
THAT MAY BLOCK THE VENTILATION OPENINGS. THE
APPLIANCE SHOULD NOT BE PLACED IN A BUILT-IN
INSTALLATION, SUCH AS A BOOKCASE OR CABINET, THAT
MAY IMPEDE THE FLOW OF AIR THROUGH THE VENTILATION
OPENINGS.
OBJECT & LIQUID ENTRY - CARE SHOULD BE TAKEN SO THAT
OBJECTS DO NOT FALL AND LIQUIDS ARE NOT SPILLED INTO
THE ENCLOSURE THROUGH OPENINGS.
DAMAGE REQUIRING SERVICE - THE APPLIANCE SHOULD BE
SERVICED BY QUALIFIED SERVICE PERSONNEL WHEN:
(A) THE POWER SUPPLY CORD OR THE PLUG HAS BEEN
DAMAGED (B) OBJECTS HAVE FALLEN OR LIQUID HAS BEEN
SPILLED INTO THE APPLIANCE (C) THE APPLIANCE HAS BEEN
EXPOSED TO RAIN (D) THE APPLIANCE DOES NOT APPEAR
TO BE OPERATING NORMALLY OR EXHIBITS A MARKED
CHANGE IN PERFORMANCE (E) THE APPLIANCE HAS BEEN
DROPPED OR THE ENCLOSURE DAMAGED.
HEAT - SITUATE THE APPLIANCE AWAY FROM HEAT SOURCES
SUCH AS RADIATORS, HEAT REGISTERS, STOVES OR OTHER
APPLIANCES (INCLUDING AMPLIFIERS) THAT PRODUCE HEAT.
POWER SOURCES - CONNECT THE APPLIANCE ONLY TO A
POWER SUPPLY TYPE DESCRIBED IN THE OPERATING
INSTRUCTIONS OR MARKED ON THE APPLIANCE.
SERVICING - THE USER SHOULD NOT ATTEMPT TO
SERVICE THE APPLIANCE BEYOND THAT DESCRIBED IN
THE OPERATING INSTRUCTIONS. ALL OTHER SERVICING
SHOULD BE REFERRED TO QUALIFIED SERVICE PERSONNEL.
GROUNDING OR POLARIZATION - PRECAUTIONS SHOULD BE
TAKEN SO THAT THE GROUNDING OR POLARIZATION MEANS OF
THE APPLIANCE ARE NOT DEFEATED.
2
Is a cassette loaded? Is the cassette’s erasure
prevention tab broken off?
Is the AC power cord unplugged or loose?
Is the CD upside down?
Is the CD or lens excessively dirty?
Is the disc holder closed properly?
Is the PAUSE mode on?
Is the FUNCTION switch on CD mode?
The CD produces no sound.
Is there condensation inside the unit? If so, let stand
for 1-2 hours until dry.
The CD sound jumps.
Is the lens or CD excessively dirty?
Is the unit subjected to excessive vibration?
Are there any bad scratches on the CD?
CD stops immediately.
Is CD loaded upside down?
Is CD not set properly in tray?
Is CD excessively dirty?
CD takes too long to start
Press STOP and PLAY/PAUSE again, repeat if necessary.
AM/FM Radio
No sound or signal
Is FUNCTION Selector set to Radio?
Is Band Selector set properly?
Signal is unclear.
Is telescoping antenna fully extended and properly
positioned for best reception?
FM Stereo reception is unclear.
Tune Radio so FM Stereo LED is lit. Adjust antenna if necessary.
15
Service and Repair Instructions
Inspecting & Unpacking
In the event that service should become necessary for any reason, contact the dealer from whom you
purchased this unit. The service or repairs can be done promptly and efficiently by your Califone dealer. If
you wish assistance from the factory, write us:
Although the shipping carton and packaging materials are designed to prevent damage during shipment, you
should inspect the carton for any signs of mishandling or damage immediately upon receiving your new unit.
Carefully lift the unit from the carton and inspect it for any signs of damage. Save all packaging materials for
possible later use.
Attention: Customer Service
Califone International Inc.
21300 Superior Street
Chatsworth, CA 91311
Or, call, toll free:
Note: Any shipping damage or loss claims must be submitted to the freight agent.
Your carton and packaging should contain the following:
(800) 722-0500
• 2385AV-02 CD/Cassette/AM/FM Radio OR
• 2395AV-02 CD/Dual Cassette/AM/FM Radio
• Owner’s Manual
• Califone Warranty Registration Mail-In Card
• Project Intercept Tag
Be sure to have the model and serial number available. Please DO NOT SHIP ANY UNIT TO THE
FACTORY WITHOUT PRIOR AUTHORIZATION AND INSTRUCTIONS.
Specifications
Initial Set-Up
Output Power
Radio Frequency Range
Cassette Frequency Resp.
CD Frequency Response
Power Supply
Dimensions (WxHxD)
Weight
6W
AM 525-1710KHZ
FM 88 – 108 MHz
80Hz – 12000Hz
20Hz – 20000Hz
AC 110V – 60Hz, 8”D” (UM-1) Cells
16 1/4”W x 6 1/4”H x 9 1/4”D
7 lbs.
AC Line Operation
1. The power cord is located at the rear of the unit. Release the cord retainer tab and uncoil the cord.
2. Plug the cord into a standard 120 volt 50-60 Hz AC outlet. Be sure the plug blades are fully inserted. THE
UNIT IS ON WHEN PLUGGED IN.
Battery Operation
Troubleshooting
PROBLEMS
General
The unit does not operate.
Cassette
Cassette cannot be loaded.
ITEMS TO CHECK
1. The battery compartment is located at the rear of the unit. Push the lever at the center of the door toward
the rear of the unit, then lift the door free.
Is the AC power cord unplugged?
Are the batteries fully charged?
2. Eight “D” or UM-1 size batteries are required. When installing refer to the orientation diagram shown
inside the battery compartment. Place the batteries on top of the nylon ribbon. This helps to “pop” old
batteries out when you need to replace them.
Is cassette being loaded properly?
Is the PLAY key depressed?
The tape does not move.
Is the PAUSE key depressed?
The tape gets caught in the tape
transport mechanism.
Is the pinch roller or capstan dirty?
Is there excessive slack in the tape?
Tape speed is slow.
Is the tape too old or the quality bad?
14
3. Replace the battery cover.
IMPORTANT: Remove all batteries from your cassette unit if it will not be used for an extended period of time.
DO NOT LEAVE DISCHARGED BATTERIES IN THE BATTERY COMPARTMENT. DAMAGE TO THE UNIT DUE TO
BATTERY CORROSION IS NOT COVERED UNDER WARRANTY.
NOTE: Califone cassette recorders are designed for use only with Type 1 Normal Bias
recording tape.
3
5. Use the Tuning buttons to select the desired station.
6. Adjust antenna for best reception.
Front View
33
Note: When tuning FM stereo stations the FM indicator will light when an FM stereo station is tuned in.
18
3
2
13
46
Care and Handling of Compact Discs
1.
2.
3.
4.
5.
6.
7.
38
36
40
44
42
34
39
37
43
8.
41
45
9.
35
Handle the disc by its edges or center hole. To keep the disc clean, avoid touching the data surface.
Data is embedded directly beneath the label, protected only by a thin lacquer layer and is more
vulnerable to damage than the bottom. A scratch that penetrates the label will certainly destroy data,
whereas a scratch on the bottom can often be overlooked or corrected by the laser pickup.
Do not write on the label surface. A ballpoint will damage data; marking pens have solvents that may
penetrate the top layer.
Do not stick paper or tape on the label surface; this probably won’t hurt the disc but might jam the
disc drive.
Do not expose a disc to high temperature or humidity for an extended period of time. The disc material
will soften at around 200 degrees Fahrenheit. Allow the disc to reach room temperature before playing if
it has been subjected to extreme cold.
Preventive cleaning is unnecessary and potentially harmful. Clean only when required.
Clean a disc with a soft moistened cloth. Pat dry. Wipe the disc from the center out like spokes of a
wheel. Never wipe across a disc as you would an LP record.
Never use solvents, commercial cleaners or sprays designed for LP’s. Plain lukewarm water is
recommended.
Keep discs protected at all times.
Cassette Maintenance & Service Cleaning
Rear View
HEA DPHONE
MIC
REMOTE
29
30
EXT.SPK .
R
L
27
The heads, capstan and pinch roller should be cleaned from time to time to prevent buildup of tape oxide,
which degrades performance.
1. Remove cassette tape before cleaning.
2. Clean the head of all visible, reddish-brown oxide with a cotton-tipped swab moistened with a methyl
alcohol or any solution specifically manufactured for this purpose.
Caution: DO NOT scrape the head surface with hard, sharp or abrasive objects. This will permanently
damage the heads.
3. Clean the pinch roller by scrubbing the surface of the roller with the moistened swab. Rotate the roller
by hand until the entire surface is clean.
4. Clean external case surfaces with a moist, soft cloth. Use only a mild detergent water solution.
28
Head Demagnetization
It is recommended that the tape heads be demagnetized from time to time. This eliminates residual
magnetism which degrades sound reproduction and the recording function.
1. After cleaning the heads and capstan, place the demagnetizer several feet away from the cassette unit
and plug it into an AC outlet.
2. Follow the manufacturer’s operating instructions supplied with the demagnetizer.
0
1
B EAT CUT
4
13
To pause a playing CD
Press the PLAY/PAUSE button again. The pause indicator “II” will appear on the display. Press PLAY/PAUSE
again to resume play.
Top View
To skip forward or backward from track to track during playback
Press the (SKIP>>) button once and the next track will be displayed and begin playing. Press repeatedly to
move forward to the desired track.
ON
OFF
Repeat CD Selections
Repeat one or all programmed selections using the CD REPEAT button. Push the button once to replay any
single selection. Push the button twice to replay all programmed selections (in programmed order). Push
the button three times to clear the REPEAT function. “REPEAT ONE” or “REPEAT ALL” will appear on the CD
PROGRAM DISPLAY when the CD REPEAT button is pushed.
AM/FM Radio Operation
The 2385AV-02 and 2395AV-02 feature an AM/FM PLL (phase locked loop) stereo radio and telescopic
antenna for local AM and FM stereo reception. To operate the radio:
1. Plug the unit in.
2. Set the FUNCTION selector to Radio.
3. Extend the telescope antenna.
4. Select AM, FM or FM Stereo reception band.
12
19
14
9
POWER
10
PLAY/
PAUSE
•
TUNER
11
8
47
STERE
MONO O/
20
21
12
7
VOLUM
E
T REBLE
TUNE
BA S S
15
R•
22
STOP
/
PRESEATT
REPE
23
16
17
To search forward or backward to a particular point on a track during playback
Press and hold the (SKIP<<) or (SKIP>>) buttons to search forward or backward through the current track.
Playback resumes at the point you release the button.
Note: The program will be erased when you press the CD PROGRAM button.
32
BALANCE
PHONES
Press the (SKIP<<) button once to return to the beginning of the current track. Press repeatedly to skip back
to earlier tracks. Playback resumes from the selected track.
Program Playback
Up to 20 tracks can be programmed for playback. To program a song sequence:
1. Press STOP first if the CD is playing.
2. Press the PROGRAM button. The CD display will show P:01
3. Press the (SKIP>>) and or (SKIP<<) buttons to select the first track to program.
4. Once the desired track is reached, press the PROGRAM button to enter the track
number into memory.
5. Repeat steps 3 & 4 to program additional tracks.
6. Press the PLAY/PAUSE button to start programmed playback.
26
1
To stop a playing CD
Press the STOP button. The Display shows, “—”.
Note: When you press PLAY again the Player will return to the first song. The Display will show “00” and
then “01”.
4
TAPE
AM/FM
5
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
CD
24
6
Power On
Power/Standby Switch
LCD Display
Tape
AM/FM
CD
Volume Down
Volume Up
Treble Up
Treble Down
Bass Up
Bass Down
Telescoping Antenna
Tuner Up
Tuner Down
Preset
Program
CD Door
Play/Pause
Skip/Scan Forward
Skip/Scan Back
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34 & 35.
36.
37.
38 & 39.
40 & 41.
42 & 43.
44 & 45.
46.
47.
5
RANDOM
25
PLAY
TIME
PROGRAM
Stop
Repeat
Random
Play Time
3.5 mm Headphone Jack
1/4” Headphone Jack
External Speaker Jacks
Microphone Jack
Mic. Remote On/Off Jack
Remote Sensor
Balance Control
Carrying Handle
Stop/Eject
Tape Cassette A
Tape Cassette B
Play
Pause
Rewind
Fast Forward
Tape Counter
Stereo/Mono - FM Mode Only
GETTING STARTED
When the ‘Power’ button (1) is depressed the LED (2) to the left of the LCD display (3) will be red for standby
mode. Pushing the LED will cause the LED to be green indicating the unit is fully powered up.
• Depressing the ‘Tape’ (4) button will cause the LCD display to show ‘Tape’.
• Depressing the ‘AM/FM’ (5) button will cause the LCD display to show ‘AM’ or ‘FM’.
• Depressing the ‘CD’ (6) button will cause the LCD display to show ‘Disc’.
DIGITAL VOLUME CONTROL
• Press ‘VOL ▼’ (7) to reduce the volume, the level will be shown in the LCD panel. Minimum volume
will show ‘00’ on the LCD display.
Electronic Volume Control Display
VOL 04
Press ‘VOL ▲’ (8) to increase the volume. Maximum volume is ‘40’ on the LCD display.
TREBLE AND BASS CONTROLS
‘TREBLE ▲’ (9) and ‘TREBLE ▼’ (10) can be used to adjust the Treble up and down respectively, while ‘BASS
▲’ (11) and ‘BASS ▼’ (12) can be used to adjust the Bass up and down respectively. Both Treble and Bass
can be adjusted in the range of +5 to –5.
Treble
Bass
tre+2
ba-1
PLL RADIO FUNCTION
• Press ‘AM/FM’ (5) to select the desired reception band. Extend the telescoping antenna (13) for
FM. There is a built-in antenna for AM reception. For FM stereo reception the ‘stereo’ will show on
the LCD display.
AM Band Selection
AM
520
KHz
• Press the ‘TUNER ▲’ (14) or ‘TUNER ▼’ (15) button repeatedly until the desired station shows on
the LCD display.
• To automatically scan through the frequency bands, hold the ‘TUNER’ button down until you see
the speed of the LCD display increase. Scanning will stop when a strong signal is detected.
6
Set the FUNCTION Selector to:
TAPE (4) to record from microphone. Plug mic into jack (29) or (30)
AM/FM (5) to record from radio
CD (6) to record from CD
1. Insert a blank tape into cassette Deck A.
2. Press the PAUSE button then the RECORD button on Deck A to prepare for recording. As the
RECORD button is pressed the PLAY button will follow.
3. Press PAUSE again to start recording.
Dubbing (Recording from Tape B to Tape A)
1. Insert a blank tape into cassette Deck A, and the source or prerecorded tape into Deck B.
2. Press the PAUSE button then the RECORD button on Deck A to prepare for recording. As the
RECORD key is pressed the PLAY button will follow.
3. Press the PLAY button on Deck B, the PAUSE button on Deck A will release automatically and
recording will begin.
Note: Every new cassette tape has erase prevention tabs. Commercially
prerecorded tapes have the tabs removed to prevent recording over
the original material or accidental erasure. Cover the openings with
adhesive tape if you wish to record over such cassette tape.
To Stop Recording
Press the STOP/EJECT button on Deck B or press the PAUSE key on Deck A to momentarily stop recording.
Cueing with the Tape A Counter (46)
Rewind the tape to the beginning. Press the RESET button to reset the counter to (000). Use the Tape A
Counter Display to note precise points on an audio tape during playback and to cue the tape to those precise
points using the Fast-Forward/Cue or Rewind/Review buttons.
Compact Disc Player Operation
The 2385AV-02 and the 2395AV-02 Programmable Compact Disc Player plays both 12cm and 8cm CDs, CD-R,
CD-RW without requiring an adapter. Up to 20 tracks can be programmed for play.
Loading a Compact Disc
1. Lift to open the CD door and see “OPEN” on the LCD display.
2. Place a CD in compartment with label side up.
3. Press the CD door down to close.
Compact Disc Play
To play a loaded CD:
1. Turn power ON.
2. Set the FUNCTION Selector to CD.
3. The LCD will show the number of tracks and playing time.
4. Press the PLAY/PAUSE button.
The CD Display will show the current track and playing time.
11
Extension Speaker Jacks. Stereo extension speakers may be plugged into the 1/4” L (left) and R (right)
speaker jacks (28) on the rear of the cabinet.
NOTE: WHEN EXTENSION SPEAKERS ARE PLUGGED IN THE INTERNAL SPEAKERS
ARE DISABLED
Microphone Jack. To record using a dynamic microphone, plug into the 3.5 mm jack (29) on the rear of the
cabinet. Another jack, 2.5 mm (30) is provided for use with Califone model 4805AV microphone with remote
Start/Stop.
Programming Stations
20 FM stations and 12 AM stations can be saved in memory with the ‘PRESET’ (16) function.
• Select a station to be saved in memory and press the ‘PROGRAM’ (17) button to see ‘_ _’ appear
on the LCD display.
Memory Display
950
AM
CH
KHz
——
Remote Sensor. A remote sensor (31) is provided for use with the RC-2300 optional remote control.
RC-2300 Remote Control (Optional)
• The RC 2300 provides most functions available on the boombox controls. It does not, however,
function with tape operations.
• INTRO. One feature added to the remote is the Intro function. While in the CD mode press the
‘PLAY’ button, then press the ‘INTRO’ button. This will give a preview of each track for 10 seconds.
Press the INTRO button again to resume normal play. If the INTRO button is not pushed a second
time, the preview will continue through the last track. Pushing PLAY, PAUSE or STOP will not
disengage the Intro function.
• MUTE. Mute is another feature added to the remote. It works with tape, AM/FM and
CD functions.
• 10+. This button allows you to jump forward a number of tracks rather than use the scan forward
feature. From stop, pause or play, pushing the 10+ button once will show a 1 and a flashing –
(dash) see 1-. To jump to track 15 enter 5. To go to track 23 from track 6 press 10+ twice and see
2-. Enter 3 and jump to track 23.
• Other Notes.
- The ‘SCAN/SKIP’ buttons are the same as the ‘Tuner ▲’, ‘Skip forward>>❘’ and ‘Tuner ▼’, Skip
back ❘<<’ buttons on the boombox.
- The ‘REPEAT’ button is the same as the ‘PRESET/REPEAT’ button on the boombox.
- The ‘TIME’ button is the same as the ‘PLAY TIME’ button on the boombox.
Continuous Play (Deck B to Deck A 2395AV-02)
1. Set the FUNCTION selector to TAPE.
2. Load prerecorded cassettes into Deck A and Deck B.
3. Press the PLAY button on Deck B.
4. Press the PAUSE and PLAY buttons on Deck A.
5. Adjust the Volume and Tone controls.
6. When the tape in Deck B reaches its end, it will automatically stop and the tape in Deck A will
begin playing automatically.
To Record from Microphone, Tape, Radio or CD
This unit has an ALC (Automatic Level Control) circuit and no further adjustment of the Volume control is
necessary while recording.
10
• Press ‘PRESET’ key to choose the desired channel (e.g. channel 1) then press ‘PROGRAM’ again to
save.
Choose Channel 1
950
AM
CH
KHz
1
• Select another station and press ‘PROGRAM’ again, then press ‘PRESET’ to select channel 2.
Press ‘PROGRAM’ again to save.
To access preset stations simply press the ‘PRESET’ button until the desired channel is found.
CD FUNCTION
The 2385-02/95-02 CD player will accept both 12 cm and 8 cm discs and will read CD, CD-R and
CD-RW formats.
• Before opening the CD door (18) the LCD will show dashed lines. Open the CD door and the LCD
display will show ‘Open’. Insert a CD and push door closed and the LCD will display the number of
tracks and total play time of the disc.
Reading TOC
After Reading TOC
Track
————
45:06 11
——
• Press the ‘PLAY/PAUSE button’ (19) to play the CD and the LCD display will flash while reading the
disc. Then it will show track 1 and the elapsed playing time.
Searching Track 1
Playing Track 1
Track
——:——
Track
11
0:01 1
7
• To Pause press the ‘PLAY/PAUSE’ button while the disc is playing, the playing time will flash.
Pressing the ‘PLAY/PAUSE’ button again will start the disc again from where it paused.
• To select a track to play, press the ‘SKIP FORWARD’ >>❘ (20) or ‘SKIP BACK’ ❘<< (21) button either
from ‘Stop’ or ‘Pause’. Each press will change the track number by one.
• If the CD is playing, pushing and holding the ‘SKIP’ >>❘ button will advance through the current
track until it is over, then proceed to advance through the next track as long as the button is held
down. Conversely, pushing and holding the ‘SKIP’ ❘<< button will scan in the reverse direction
through the track currently playing and continue through previous tracks as long as the button is
held down.
• To stop playing the disc, press the ‘STOP’ button (22).
REPEAT PLAYING
• To repeat one track, press the ‘REPEAT’ button (23) one time either while playing or in pause.
One Track Repeat (Flashing)
Repeat
Track
4:05 5
• To replay all tracks, press the ‘REPEAT’ button a second time either while playing or in pause.
• A third press of the ‘REPEAT’ button will cancel the repeat command.
MEMORY PROGRAMMING. Up to 16 tracks can be programmed.
With the CD stopped press the ‘PROGRAM’ button one time. Select a track to play by pushing the ‘Skip
Forward’ >>❘ or ‘Skip Back’ ❘<< button. Push the ‘PROGRAM’ button again to enter another track to save in
memory. When finished, press the ‘PLAY/PAUSE’ button to start the program. Pressing ‘STOP’ at any time
exits the Program function. Note: When the CD door is opened all programming is cleared.
Program Input Mode
Memory
PR:01
Choose Track 4
Track
Memory
PR:01
——
Program Input Complete
Memory
Random Play Function
Pressing the ‘RANDOM’ button (24) during CD play or stop condition will engage random play. Pressing again
will cancel the function. Note: If the CD has memory programmed, the random function cannot operate until
the program is cleared.
Play Time Mode
Pressing the ‘PLAY TIME’ button (25) changes the time format on the LCD from elapsed time of each track to
the total time remaining on the CD.
Dual Cassette Operation
The 2385AV-02 features a cassette for playback and recording from radio, CD and microphone. Since the
2385AV-02 is a single cassette unit, disregard all references to “Tape B” below. The 2395AV-02 features
dual cassette decks for playback, continuous playback (Deck B to Deck A) and recording from tape, radio,
microphone or CD on Deck A only.
Loading a Tape
To load a cassette tape, press the STOP/EJECT button (34) on Tape A or (35) on Tape B to open the cassette
door. Insert tape with playing side label facing you. Close the cassette door to lock the tape in position. Note:
While Deck A is in playback mode, Deck B must be stopped and not in PLAY or PAUSE mode for Deck A to
playback.
Tape Playback
To play a loaded cassette tape:
1. Set FUNCTION button to TAPE
2. Press PLAY Deck A or B (38) (39)
3. Adjust VOLUME (7) (8)
4. Adjust TREBLE and BASS controls (9) (10) (11) (12)
To Stop Playback
Press the STOP/EJECT key (34) (35).
To Pause Playback
Press the PAUSE key (40) (41) all the way down to lock. To resume play, press the PAUSE key again, and
release.
Track
04
To Fast Wind/Rewind
Press the REWIND (42) (43) or FAST-FORWARD (44) (45) key. Press the STOP/EJECT key to stop winding at
the desired position.
During fast winding, regular play, or recording, the tape will stop automatically when its end is reached.
Track
PR:02
8
OTHER FEATURES AND FUNCTIONS
——
Headphone Jacks. Two jacks are provided. One 3.5 mm jack (26) on top and one 1/4” phone jack (27) on
the rear of the cabinet.
9
Download PDF

advertising