Canon 10D Digital Camera User Manual

Direct Printing
from PictBridge-compatible
Printers
This camera is compatible with PictBridge for direct printing with
PictBridge-compatible printers. Connect the camera to a
PictBridge-compatible printer to print nice photos easily.
E
English Edition
Preparing to Print
If you have a CP-series Canon Card photo printer, see “Camera
Direct Printing” to print photos.
Camera Settings
On the menu, set [Communication] to [PTP].
[Communication].
1 Select
Turn
the
< > dial to select
•
>.
[Communication], then press <
[PTP].
2 Select
Turn
the
< > dial to select [PTP],
•
then press < >.
If it is set to [Normal], printing might
not be possible.
Before connecting the camera to the computer, set the [Communication]
to [Normal]. If it is set to [PTP], communications with the computer might
not be possible.
Connecting the Camera to the Printer
1 Turn the <
> switch to <
up the printer.
2 Set
For
• details, refer to the printer’s
manual.
2
>.
Preparing to Print
the camera to the printer.
3 Connect
Connect
the camera to the printer with
•
•
the USB cable that came with the
camera to. Refer to the printer’s
instruction manual to find out which
port to connect the USB cable to.
When connecting the cable plug to the
> terminal, the cable
camera’s <
plug’s < > icon must face the front
side of the camera.
4 Turn on the printer.
the camera’s <
5 Turn
< >.
s
> switch to
When the printer connection is
confirmed, the beeper will sound
briefly.
the < > button.
6 Press
The image will be displayed, and the
s
<w> icon will appear on the upper
left.
In step 5, if you hear long beeps, it means something is wrong with the
printer. To find out what’s wrong, do the following:
Press the < > button to playback an image. Then do step 2 (Press
< >) and step 4 (Print the image) on the next page. An error message
will then appear on the LCD monitor. To fix the problem, see “Error
Messages” on page 11.
If the camera is connected to the printer and you do not operate it for
approx. 6 minutes, the camera power will turn off automatically. However, if
the auto power off time is longer than 8 minutes, then that setting will take
effect instead.
3
Printing
You do all the printing operations with the camera.
h images cannot be printed with PictBridge.
Connected printer icon
the image to be printed.
1 Select
Check
that the <w> icon is displayed
•
on the upper left of the LCD monitor.
the < > dial to select the image
• Turn
to be printed.
< >.
2 Press
The print setting screen will appear.
s
Print setting screen
Set the date imprinting to on or off.
Set the printing effects.
Sets the quantity to be printed.
Sets the trimming area.
Sets the Paper Size, Type, and Page Layout.
Starts the printing.
Returns to the screen in step 1.
The Paper Size, Type, and Page Layout you have set will be displayed.
* Depending on your printer, certain settings like the date imprinting and
trimming might not be available.
the printing options.
3 Set
For
• the setting procedure, see “Setting
the Printing Options” on the next page.
the image.
4 Print
Turn
• the < > dial to select [Print],
s
•
4
then press < >.
Printing will start.
When the printing is completed
properly, the screen returns to step 1.
Setting the Printing Options
Depending on your printer, certain settings might be different or
might not be available.
For details, refer to your printer’s instruction manual.
Date imprinting
Set the Date imprinting.
Turn the < > dial to select [H]
• (Date),
then press < >.
s
Turn the < > dial to select the
desired setting, then press < >.
About the [Default] Setting
[Default] sets the printer’s own default settings as set by the printer’s
manufacturer. See the printer’s instruction manual to find out what the
printer’s default settings are.
Printing Effects: Image optimization
Set the Printing Effects.
the < > dial to select [E]
• Turn
(Printing Effects), then press < >.
s
Turn the < > dial to select the
desired setting, then press < >.
Setting the Quantity
Set the number of copies.
the < > dial to select [R], then
• Turn
press < >.
the < > dial to set the number
• Turn
of copies, then press < >.
• Set a number from 1 to 99.
5
Setting the Printing Options
Setting the Trimming
You can trim the image and print only the trimmed portion.
Set [Paper Settings] beforehand. If you trim the image and then
change the [Paper Settings], you may have to set the trimming again.
[Trimming].
1 Select
Turn
the
< > dial to select
•
s
[Trimming], then press < >.
The trimming screen will appear.
the image.
2 •Trim
The image area within the trimming
frame will be printed.
Changing the trimming frame size
Press the < > or <
> button to change the size of the
trimming frame.
Moving the trimming frame
• Turn the < > dial to move the trimming frame horizontally or
vertically.
• To move the trimming frame vertically, press the < > button to
change the moving direction, then turn the < > dial. Each time
you press the < > button, the direction changes.
• The moving direction is indicated by the < > or < > arrows
displayed outside the trimming frame.
Rotating the trimming frame
> button to rotate the trimming frame. The button
Press the <
toggles between the vertical and horizontal image orientation.
For example, a horizontal shot can be printed as a vertical shot.
6
Setting the Printing Options
operation guide disappears while
• The
you trim the image. It will reappear
after 5 sec. of idle time.
the trimming.
3 Exit
Press
< > to return to the print
•
setting screen.
(p.9) is set, certain printers might not print the image in
• Ifthe[Borderless]
way you trimmed it.
smaller the trimming frame, the rougher the image quality will be.
• The
• When setting the [Trimming], look at the camera’s LCD monitor.
The [Trimming] setting will be canceled after the printing is completed or if
you execute [Cancel].
7
Setting the Paper and Page Layout
Set the <T> (Paper Size), <Y> (Paper Type), and <U> (Page
Layout).
Depending on your printer, certain settings might be different or
might not be available.
For details, refer to your printer’s instruction manual.
Select [Paper Settings].
the < > dial to select [Paper
• Turn
Settings], then press < >.
s
The Paper Settings screen will appear.
TSetting the Paper Size
Set the Paper Size.
the < > dial to select Paper
• Turn
Size, then press < >.
s
The <Y> Paper Type screen will
appear.
YSetting the Paper Type
Set the Paper Type.
the < > dial to select Paper
• Turn
Type, then press < >.
s
8
The <U> Page Layout screen will
appear.
Setting the Paper and Page Layout
About the Paper Type
If you are using a Canon printer with Canon paper, set the respective
paper type as follows:
Photo
Fast Photo
Default
Photo Paper Plus Glossy
Photo Paper Pro
Photo Paper Plus Glossy
If you are using a non-Canon printer, refer to the printer’s instruction
manual for the recommended paper type settings.
USetting the Page Layout
Set the Page Layout.
the < > dial to select Page
• Turn
Layout, then press < >.
s
The print settings screen will reappear.
About Page Layout
Bordered
Borderless
8-UP
Default
The print will have a white border along the edges.
The print will have no white borders.
If your printer cannot print borderless prints, the print
will have borders.
Eight copies of the same image will be printed on a
single sheet.
With a Canon printer, the print will be borderless.
Stopping the Printing
While [Stop] is displayed on the
LCD monitor, press < >.
s
s
The printing will stop.
If the confirmation dialog appears, turn
the < > dial to [OK], then press
< >.
9
DPOF Printing
With DPOF, you can print any number of images at one time. To set the
printing options, see the DPOF section in your camera’s instruction
manual.
for printing.
1 Prepare
See
pages
2 and 3. Proceed up to step
•
5 where you turn on the camera’s
power switch.
[Print Order].
2 Select
Turn
the
< > dial to select [Print
•
Order], then press <
>.
[Print].
3 Select
• Turn the < > dial to select [Print],
then press <
>.
will be displayed only if the
• [Print]
camera is connected to the printer and
printing is possible.
4 Set [E] (Printing Effects). (p.5)
the [Paper Settings]. (p.8)
5 Set
Set
• the paper and page layout.
Print Order settings
printing settings will appear on the
• The
left.
Depending on your printer, certain settings might be different or
might not be available.
For details, refer to your printer’s instruction manual.
10
DPOF Printing
printing.
6 Start
Turn
• the < > dial to select [OK], then
s
•
press < >.
The printing will start.
When the printing ends, the screen will
return to step 3.
the DPOF print type, [Both] cannot be selected. If [Both] is set, the
• For
printing will be done according to the [Standard] setting.
• The file No. cannot be imprinted.
Error Messages
If a problem occurs with the printing, an error message will appear on
the LCD monitor. Press < > to stop the printing. After resolving the
problem, resume printing.
To resolve printing problems, refer to the printer’s instruction manual.
Paper Error
Check whether the paper is properly loaded in the printer.
Ink Error
The printer has run out of ink or the waste ink tank is full.
Hardware Error
Check for any printer problems other than paper and ink problems.
Check the camera’s battery level.
File Error
You attempted to print an image that cannot be printed with
PictBridge.
Images taken with a different camera or images edited with a
computer might not be printable.
11
after printer errors (No ink, No paper, etc.) are resolved
• Operations
If printing does not resume when [Continue] is selected following the
•
resolution of a printer problem, use the controls on the printer itself to restart
printing.
Refer to the printer’s User’s Guide for information on how to restart printing.
Notes on batch printing using [Print Order (DPOF)]
Do not specify more than 100 images in one print order. The maximum number
of images that can be printed at one time is 100.
MEMO
CT1-1263-000
0000Ni0.0
K168 E_PictBridge
© CANON INC. 2003
Page 12
PRINTED IN JAPAN
03.10.3, 1:24 PM
Adobe PageMaker 6.5J/PPC
Download PDF

advertising