Canon 1446B002 Printer User Manual

Start Here
Easy Setup Instructions
Photo Printer
Important
When cleaning the exterior of the printer, use a soft cloth to wipe it gently. For details, refer to “Cleaning Your Printer” in the Quick Start Guide.
1 Prepare the Printer
2 Install the Print Head
a Unpack the Printer.
a Open the Print Head Cover. The Print
Confirm the included items referring to the
illustration printed on the lid of the packing box
or “Included Items” in the Quick Start Guide.
Head Holder moves to the center.
3 Install the Ink Tanks
e Remove the orange protective cap from
the Print Head and discard it.
Print Head Nozzles
Note
For the ink tanks compatible with this printer, refer to
the back cover of the Quick Start Guide.
4 Load Printing Paper
d Similarly, insert the Color ink tank into
the left slot.
a Remove the orange protective cap and
discard it.
A USB cable is necessary to connect the printer
with your computer.
Protective Cap
b Place the printer on a flat and
Ink Port
MP-101
Remove all the shipping tapes on the outside of
the printer.
Print Side
Paper Guide
c Connect the power cord to the AC
adapter. Plug the AC adapter into the
printer, and connect the other end of
the power cord to the wall outlet.
Electrical Contacts
Print Head Holder
b Unlock the Print Head Lock Lever by
squeezing both tabs inward.
Protective Cap
Important
• Do not touch the print head nozzles.
• Do not reattach the protective tape once you
have removed it.
f Insert the Print Head.
Align the
mark on the
Print Head with the
mark
on the Print Head Holder.
Important
Do NOT connect the USB cable at this stage.
d Open the Rear Tray Cover and pull out
the Paper Support completely.
For Print Head Alignment MP-101)
loaded with the printing side (whiter
side) facing UP in the Rear Tray, align
the paper stack against the guide on
the right side of the Rear Tray.
Make sure that the Paper Thickness Lever is
set to the right.
Print Head Cover
horizontal surface, and do not place
any objects in front of the printer.
a Load a sheet of supplied paper (Paper
Important
• Do not touch the electrical contacts and the ink
port.
• Do not reattach the protective tape once you
have removed it.
b Insert the Black ink tank at a slant into
the right slot.
Align the
with the
Holder.
Important
If the front (innermost) part of the ink tank (A) is
sticking up, push down on the Canon logo on the
ink tank as illustrated below. Do not remove the
ink tank forcibly.
(A)
mark on the ink tank
mark on the Print Head
Paper Thickness Lever
Important
• Make sure the printer is turned on and the Power
lamp is flashing green.
• Make sure the Print Head Holder has moved to
the center.
Hardware setup is now complete.
Next, turn over and install the software.
c Raise the Print Head Lock Lever until it
stops.
Paper Support
c Press the
mark on the ink tank until it
clicks into place.
Rear Tray Cover
g Lower the Print Head Lock Lever
carefully.
e Close the Print Head Cover.
Paper Output Slot Cover
Note
The Paper Output Slot Cover will open automatically.
e Press the Power button to turn on the
printer.
Caution
Do not touch internal parts other than the Print
Head Lock Lever.
d Remove the Print Head from its
package.
h Push both tabs in left to right order until
each clicks into place.
Important
• Make sure that the ink lamp lights red.
• If the ink lamp does not light red after it is inserted, repeat steps b and c.
• If the Print Head Cover is left open for more than
10 minutes, the Print Head Holder moves to the
right. Close and reopen the Print Head Cover to
return the holder to the center.
Important
Once you have installed both ink tanks, the Power
lamp will flash green. Wait for about 2 minutes,
until the Power lamp stops flashing and changes
to steady, non-flashing green and the printer has
stopped making operating noises, before proceeding.
Caution
There may be some transparent or light blue ink
on the inside of the bag the print head comes in,
or the inside of the protective cap - this has no
effect on print quality. Be careful not to get ink on
yourself when handling these items.
Note
If the Alarm lamp on the printer flashes orange after
you have closed the Print Head Cover, refer to “Alarm
Lamp Flashes Orange” in “Troubleshooting” of the
Quick Start Guide.
Important
Make sure that the Print Head Lock Lever is firmly
locked into the Print Head Holder by pressing both
tabs on the Print Head Lock Lever until it clicks.
QT5-1436-V02
XXXXXXXX
© 2008 Canon Inc.
PRINTED IN THAILAND
5 Software Installation
Note
• The screens below refer to Windows Vista™ operating system Ultimate Edition
(hereafter referred to as “Windows Vista”) installation.
Screens may vary depending on the operating system you are using.
• Log into a user account with the administrator privilege.
• Do not switch users during the installation process.
• Quit all running applications before installation.
• A message asking for your confirmation to restart your computer may appear during
the installation process. If this message is displayed, follow the on-screen instructions
and click OK.
The installation resumes from where it left off when your computer has been restarted.
• If the computer is restarted during installation, do not remove the Setup CD-ROM
during restarting.
aBe sure to TURN THE PRINTER OFF before continuing.
(1) Press the Power button.
(2) Make sure that the Power lamp stops flashing.
5 Software Installation
Note
• Since Mac® OS 9, Mac OS X Classic environments, or Mac OS X v.10.3.8 or earlier are
not supported, do not connect the printer to these. Use Mac OS X v.10.3.9 or later.
• The screens below refer to Mac OS X v.10.4.x installation. Screens may vary
depending on the operating system you are using.
• Log on as an Administrator.
• Quit all running applications before installation.
USB
→
To Computer
jWhen the Print Head Alignment screen appears, make sure
that a sheet of supplied paper (Paper For Print Head Alignment
MP-101) is loaded in the Rear Tray. Click Execute, confirm the
displayed message and click Align Print Head.
the printer.
Note
Make sure the printer is turned on.
Note
• Print Head Alignment will take about 5 minutes to complete. Do not start another
operation until the printer has stopped making operating noises.
• Do not open the Print Head Cover while printing.
The pattern is printed, and the Print Head is aligned automatically.
USB
Note
• Print Head Alignment will take about 5 minutes to complete. Do not start another
operation until the printer has stopped making operating noises.
• Do not open the Print Head Cover while printing.
The pattern is printed, and the Print Head is aligned automatically.
bTurn on your Mac and insert the Setup CD-ROM.
Note
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon
the desktop.
dWhen the Authenticate screen appears, enter your
automatically.
Note
If installation does not start automatically, refer to “Troubleshooting” instructions in the
Quick Start Guide.
dIf the AutoPlay screen appears, click Run Msetup4.exe.
eIf the User Account Control screen appears, click Continue.
If the same screen reappears in subsequent steps, click
Continue.
fWhen the main menu appears, click Easy Install.
The printer driver, On-screen Manuals, and application software are installed
automatically.
on
cDouble-click the Setup icon.
cInsert the Setup CD-ROM. The setup program should run
In Windows Vista, go to Step d. In Windows XP and Windows 2000, go to
Step f.
Note
• The pattern is printed in black and blue.
• When Automatic Print Head Alignment cannot be executed properly, the Alarm lamp
on the printer will flash orange eleven times. Refer to “Alarm Lamp Flashes Orange” in
“Troubleshooting” of the Quick Start Guide.
kAfter print head alignment is completed, click Next.
lWhen the Installation Results screen appears, click Next.
administrator name and password. Click OK.
If you do not know your administrator name or password, click
, then follow the on-screen instructions.
eWhen the main menu appears, click Easy Install.
The printer driver, On-screen Manuals, and application software are installed
automatically.
click Install.
Note
Move the cursor over items to display explanations of each application.
hRead the License Agreement carefully and click Yes. The
software installation screen may appear during the installation
process. Follow the on-screen instructions to install the software.
iWhen the Printer Connection screen appears, connect one
end of the USB cable to the computer, the other to the printer,
then TURN THE PRINTER ON. The printer driver will begin
identifying the printer port being used.
When performing infrared communication, make the IrDA port of each other’s
device stand opposite to each other. Distance between the IrDA ports should
be 8 inch (20 cm) or less.
Important
If you cannot go to the next procedure after 2 minutes, refer to “Troubleshooting”
instructions in the Quick Start Guide.
kWhen the Setup Complete screen appears, click Next.
lWhen the User Registration screen appears, click Next.
Note
To register later, click Cancel and go to Step m. After software installation is complete,
double-click
on the desktop.
Follow on-screen instructions to register your product. You will need your
product serial number, which is located on the rear of the printer.
Note
To register later, click Cancel and go to Step n. After software installation is complete,
double-click
on the desktop .
Follow on-screen instructions to register your product. You will need your
product serial number, which is located on the rear of the printer.
Serial Number
Note
If you want to select particular items to install, click Custom Install and follow the onscreen instructions to proceed the installation.
then click Install.
gWhen the list of software to install appears, confirm the contents,
Note
• The pattern is printed in black and blue.
• When Automatic Print Head Alignment cannot be executed properly, the Alarm lamp
on the printer will flash orange eleven times. Refer to “Alarm Lamp Flashes Orange” in
“Troubleshooting” of the Quick Start Guide.
mWhen the User Registration screen appears, click Next.
fWhen the list of software to install appears, confirm the contents,
Note
• If you want to select particular items to install, click Custom Install and follow the onscreen instructions to proceed the installation.
• To install Adobe® RGB (1998), click Custom Install and follow the instruction on the
screen.
that a sheet of supplied paper (Paper For Print Head Alignment
MP-101) is loaded in the Rear Tray. Click Execute, confirm the
displayed message, and click OK.
aConnect one end of the USB cable to the computer, the other to
bTurn the computer on and start Windows®.
Important
If the Found New Hardware or Found New Hardware Wizard screen appears automatically, remove the USB cable connected to your computer. Click Cancel to quit
the screen. The screen may close automatically when the USB cable is unplugged.
Then turn off the printer and proceed from step c to install the software.
When performing infrared communication, click Cancel to quit the screen. Then
turn off the printer and proceed from step c to install the software.
jWhen the Print Head Alignment screen appears, make sure
Serial Number
nWhen the PIXMA Extended Survey Program screen appears,
confirm the message. We would appreciate it if you would take
part in this program regarding the use of Canon printers. If you
can agree, click Agree.
If Do not agree is clicked, the PIXMA Extended Survey Program will not be
installed but you can use the printer normally.
oWhen the Installation completed successfully screen
appears, click Exit. Remove the Setup CD-ROM after clicking
Exit.
Note
Move the cursor over items to display explanations of each application.
gRead the License Agreement carefully and click Yes. The
mWhen the Installation completed successfully screen
appears, click Exit. Remove the Setup CD-ROM after clicking
Exit.
If Restart is displayed, click Restart.
Remove the Setup CD-ROM after restarting the computer.
Note
Keep the Setup CD-ROM in a safe place in case you need to reinstall the software.
software installation screen may appear during the installation
process. Follow the on-screen instructions to install the software.
hWhen the Start Setup screen appears, click Execute.
iWhen the Printer Connection screen appears, confirm the
displayed message and click Restart.
The system is restarted automatically.
Note
Do not remove the Setup CD-ROM while your computer is being restarted.
Software installation and print head alignment
are now complete.
If Restart is displayed, make sure that the Restart the system now
(recommended) check box is selected, then click Restart.
Remove the Setup CD-ROM after restarting the computer.
Note
Keep the Setup CD-ROM in a safe place in case you need to reinstall the software.
Software installation and print head alignment
are now complete.
“Microsoft” is a registered trademark of Microsoft Corporation. “Windows” is a trademark of Microsoft Corporation, registered in the U.S. and other countries. “Windows Vista” is a trademark of Microsoft Corporation. “Macintosh” and “Mac” are trademarks of Apple Inc., registered in the U.S. and other countries.
“Adobe” and “Adobe RGB (1998)” are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.