Canon 1D MK IV Camera Accessories User Manual

Introduction
Communication Software for the Camera
Contents at
a Glance
EOS Utility
Ver. 2.11
1D X
REBELT3i
1D Mk IV 1Ds Mk III
600D
REBELT2i
1D Mk III 5D Mk III 5D Mk II
550D
REBELT1i
500D
7D
REBELXSi
60D
450D
50D
REBELT3
40D
1100D
REBELT4i
REBELXS
650D
Camera
Settings
1000D
Instruction Manual
 Content of this Instruction Manual
Example: EOS-1D X 
1D X

displays the relevant camera model.
 The selection sequence of menus is displayed in 
procedures.
(Example: Select the [Window] menu  [Main Window].)
 Square brackets are used to indicate items such as
menu names, button names and window names
that appear on the computer screen.
 Text inside < > indicates a camera switch name or
icon, or a keyboard key name.
 ** indicates a reference page.
Click to move to the relevant page.

: Marks information that should be read before use.

Remote
Shooting
Y
P
O
 Switching Between Pages
 EU is used for EOS Utility.
 Camera model is displayed as an icon.
 Click on arrows on the bottom right of the screen.
C
1
2
3
4
Downloading
Images
: next page
: previous page
: return to a page you had previously displayed
 Click on the chapter headings on the right side of
the screen to switch to the contents page of that
chapter. Also, click the item you want to read about
on the table of contents to move to the relevant
page.
: Marks additional information you may find helpful.
© CANON INC. 2012
CCS-M034EUME-000
Preferences
Reference
Index
READ CAREFULLY BEFORE USING!
CANON SOFTWARE LICENSE AGREEMENT
IMPORTANT - READ THIS AGREEMENT BEFORE USING THE SOFTWARE ON THE CD-ROM
IN THIS BOX. BY USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS OF
THIS AGREEMENT.
This is a license agreement (the [Agreement]) between you and Canon Inc. ([Canon]).
IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT
USE THE SOFTWARE PROGRAM ON THE CD-ROM AND THE USER MANUAL IN THIS BOX
(COLLECTIVELY, THE [SOFTWARE]) AND RETURN THE SOFTWARE WITHIN 30 DAYS FROM
THE DATE OF PURCHASE TO YOUR POINT OF PURCHASE FOR A REFUND.
In consideration of the right to use the SOFTWARE, you agree to abide by the terms and conditions
of this Agreement.
1. LICENSE: Canon grants you the non-exclusive right to use the SOFTWARE only on a single
computer. You may physically transfer the SOFTWARE from one computer to another provided
that the SOFTWARE is used on only one computer at a time. You shall not install or use the
SOFTWARE on a network, multiple CPU, multiple site arrangement, or any other hardware
configuration where the SOFTWARE is accessible to more than one CPU or to more than one
user.
YOU SHALL NOT ASSIGN, SUBLICENSE, RENT, LEASE, LOAN, CONVEY OR OTHERWISE USE,
TRANSFER, COPY, TRANSLATE, CONVERT TO ANOTHER PROGRAMMING LANGUAGE,
ALTER, MODIFY, DECOMPILE OR DISASSEMBLE THE SOFTWARE, IN WHOLE OR IN PART,
EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT.
2. BACK-UP COPY: You may make one copy of the SOFTWARE solely for back-up purposes, or
copy the SOFTWARE onto the permanent storage device (e.g. a hard disk) of your computer
and retain the original for back-up purposes. Any other copying of the SOFTWARE is a violation
of this Agreement. You must reproduce and include the copyright notice on the back-up copy.
3. SUPPORT AND UPDATES: Canon is not responsible for providing maintenance or support for
use of the SOFTWARE. No updates, fixes or support will be made available for the
SOFTWARE.
4. LIMITED WARRANTY AND LIMITATION OF LIABILITY: It is your responsibility to choose,
maintain and match the hardware and software components of your computer system. Thus
Canon does not guarantee uninterrupted service or correction of errors or that the functions or
performance of the SOFTWARE will meet your requirements. THE SOFTWARE IS LICENSED
ON AN [AS IS] BASIS AND WITHOUT WARRANTY OF ANY KIND. The CD-ROM storing the
SOFTWARE is warranted only against defective material under normal use for a period of ninety
(90) days after purchase from an authorized Canon dealer as evidenced by your sales receipt.
Your sole remedy for a defective CD-ROM shall be replacement of the same without charge
when returned by you at your expense to your point of purchase and proven to be defective
upon inspection. The replacement CD-ROM will be warranted for the remainder of the original
ninety (90) day warranty period of the defective CD-ROM. The limited warranty does not apply if
the failure of the CD-ROM resulted from accident, abuse or misapplication of the SOFTWARE
and shall not extend to anyone other than the original user of the SOFTWARE.
Introduction
PROFITS, EXPENSE OR INCONVENIENCE HOWSOEVER CAUSED OR ARISING OUT OF THE
SOFTWARE OR THE USE THEREOF.
NEITHER CANON, NOR ANY OF CANON’S SUBSIDIARIES, DISTRIBUTORS OR DEALERS
SHALL HAVE ANY OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT
BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE OR THE USE THEREOF
INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY.
5. TERM: This Agreement is effective upon your using the SOFTWARE and remains in effect until
expiration of all copyright interests in the SOFTWARE unless earlier terminated. You may
terminate this Agreement by destroying the SOFTWARE. This Agreement will also terminate
without notice to you if you fail to comply with any of the terms of this Agreement and you must
then promptly return the SOFTWARE. In addition, Canon may enforce its other legal rights.
Contents at
a Glance
1
2
3
4
Downloading
Images
6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE: The SOFTWARE is provided with
restricted rights. Use, duplication or disclosure is subject to restrictions as set forth in either
subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer software clause at
DFARs 252.227-7013 or subparagraph (c) (1) and (2) of the Commercial Computer Software
Restricted Rights Clause at FAR 52.227-19, as applicable.
Camera
Settings
7. SEVERABILITY: In the event that any provision of this Agreement is declared or found to be
illegal by any court or tribunal of competent jurisdiction, such provision shall be null and void
with respect to the jurisdiction of that court or tribunal and all the remaining provisions of this
Agreement shall remain in full force and effect.
Remote
Shooting
Y
P
O
8. CONTROLLING LAW: The terms of this Agreement as it relates to purchases of the Software in
the United States of America shall be governed and construed in all respects in accordance with
the laws and regulations of the State of New York, without reference to choice of law principles.
The terms of this Agreement as it relates to purchases of the Software in Canada shall be
governed by the laws of the province of Ontario.
C
9. OWNERSHIP: All rights, including but not limited to copyrights and trade secret rights, to the
SOFTWARE belong to Canon, its affiliated corporations and third party licensors. Your use of
the SOFTWARE is subject to the United States, Canada and other applicable copyright and
trademark laws and nothing in this Agreement constitutes a waiver of the rights of Canon, its
affiliated corporations and third party licensors under such laws.
Nothing contained in Paragraph 1 shall be construed to give Canon any ownership rights in any
images, graphics or textual material that you save in connection with the Software.
10.ACKNOWLEDGEMENT: BY USING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU
HAVE READ THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS
TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE
COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON
CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS
OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS
BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER HEREOF. NO
AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY
AUTHORIZED OFFICER OF CANON.
Preferences
Reference
Index
EXCEPT AS SPECIFICALLY SET FORTH IN THIS PARAGRAPH 4, CANON, CANON’S
SUBSIDIARIES, DISTRIBUTORS AND DEALERS DISCLAIM ALL WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE.
NEITHER CANON NOR ANY OF CANON’S SUBSIDIARIES, DISTRIBUTORS OR DEALERS IS
LIABLE FOR ANY DAMAGES HOWSOEVER CAUSED, INCLUDING WITHOUT LIMITATION,
DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE INCLUDING LOSS OF
1
Introduction
Introduction
EOS Utility (hereinafter EU) is software for communication with your EOS
DIGITAL camera. By connecting the camera and computer with the cable
provided with the camera, you can download to your computer images
saved in the camera’s memory card as well as set various camera
settings or shoot remotely from EU on your computer.
Main Features of EU
From EU, you can control the camera remotely and perform the
following main features.
 Batch download to your computer images
saved in the camera’s memory card.
 You can also download to your computer only images you have
selected.
 Set various camera settings from your
computer.
 Shoot remotely by controlling the camera
from your computer.
 Remote Live View shooting – Shoot while checking your subject in
real time on your computer.
 You can also shoot remotely by operating the camera’s shutter
button.
 Preset a time allowing the camera to shoot automatically with
timer shooting.
 When downloading images or shooting
remotely, view/check images with the
linked Digital Photo Professional.
System Requirements
OS
Mac OS X 10.6.8, 10.7
Computer
Macintosh with one of the above OS installed and a USB
port as a standard feature
CPU
Intel processor
RAM
Minimum 1GB
Interface
Hi-Speed USB
Display
Resolution: 1024 × 768 or more
Colors: Thousands or more
Check the Canon website for the latest system requirements, including
supported OS versions.
Y
P
O
EOS-1D X
EOS-1D Mark IV
EOS-1Ds Mark III
EOS-1D Mark III
EOS 5D Mark III
EOS 5D Mark II
EOS 7D
EOS 60D
EOS 50D
EOS 40D
EOS REBEL T4i/650D
EOS REBEL T3i/600D
EOS REBEL T2i/550D
EOS REBEL T1i/500D
EOS DIGITAL REBEL XSi/450D
EOS REBEL T3/1100D
_
Supported Camera
Can be used for RAW images, JPEG images or MOV movies shot with
the cameras below.
C
EOS DIGITAL REBEL XS/1000D
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
2
Introduction
Contents at a Glance
Downloading images from your camera to a
computer
Contents at
a Glance
Remote shooting
 p.6
 To shoot by controlling the camera from a computer
(Remote Live View shooting)
 p.27
 To download to a computer selected images only
 p.7
 To shoot with accurate horizontal/vertical alignment
 p.43
 To download images using a third-party card reader
 p.10
 To change the aspect ratio and shoot
 p.44
 To shoot with another image displayed as overlay to
align several images at the same angle
 p.47
 To shoot by operating the camera
 p.52
 To shoot movies
 p.53
 To shoot with timer
 p.64
 To shoot with flash
 p.66
 To batch download all the images to a computer
Camera settings from a computer
 To set the camera owner’s name, copyright notice
and date/time
 p.12
 To set a Picture Style and apply to the camera
 p.16
 To apply a Picture Style file to the camera
 p.18
 To register a personal white balance in the camera
 p.20
 To set a JPEG quality and apply to the camera
 p.21
 To adjust a white balance setting and apply to the
camera
 p.22
 To register lens aberration correction/peripheral
 p.22
illumination correction data for the lens in the camera
 To set My Menu and apply to the camera
 p.24
Y
P
O
Camera
Settings
Remote
Shooting
Preferences
Functions for use with other accessories sold
separately
C
1
2
3
4
Downloading
Images
Reference
 To shoot with the Wireless File Transmitter WFT-E2,
WFT-E2 II, WFT-E3, WFT-E4, WFT-E4 II, WFT-E5,
WFT-E6, or WFT-E7 and check the images in real
time
 p.81
 To start up the WFT-E2, WFT-E2 II, WFT-E3, WFTE4, WFT-E4 II, or WFT-E5 software from EU
 p.82
Index
Other
 To register background music to the camera’s memory
card
 p.70
3
1
Downloading Images to your Computer
Introduction
Basic operation such as preparing for downloading images to your
computer (connecting your camera and computer), starting up EU,
downloading images from your camera to your computer and quitting EU
are explained here.
Connecting the Camera and Computer..................... 5
Starting up EU ........................................................... 6
Batch Downloading Images to Your Computer ......... 6
Downloading Selected Images to Your Computer........ 7
C
Using the Camera to Download Images to Your
Computer...................................................................... 9
Downloading Images with a Card Reader .................. 10
Downloading Images Using Digital Photo Professional ... 10
Downloading Images Using ImageBrowser EX .... 10
Downloading Images without Using Canon Software... 10
Y
P
O
Quitting EU .............................................................. 10
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
4
Connecting the Camera and Computer
To download to your computer images shot with your camera, you will
need to connect your camera and computer using the interface cable
provided with your camera.
Cameras other than 1D Mk IV
 With the <
> mark on the plug facing the front of the camera,
connect it to the camera’s <
> terminal or <A/V OUT /
DIGITAL> terminal.
the large plug of the cable into the USB port
1 Connect
of your computer.
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
 For the location and direction of the USB port, refer to the
computer User’s Manual.
2
Connect the small plug of the cable into the terminal
on your camera.
 Once the plug is connected to the camera according to the steps
for your camera model, preparation for downloading images is
complete. Continue with “Starting up EU”.
C
Y
P
O
1D Mk IV
Remote
Shooting
Preferences
Reference
Index
 With the <
> mark on the plug facing the back of the camera,
connect it to the camera’s <A/V OUT / DIGITAL> terminal.
With 1D X 1D Mk IV 1Ds Mk III 1D Mk III , you can fix the plug to the
camera with the cable protector to prevent the plug from
disconnecting. For details on using, see p.84 to p.86.
5
Starting up EU
Batch Downloading Images to Your Computer
When the camera’s power switch is set to < ON >, EU will start up, and
the camera and computer will be able to communicate.
You can batch download to your computer all the images saved on the
memory card inserted in the camera that you have not already
downloaded.
The downloaded images are sorted by date into folders and are then
displayed in the main window of Digital Photo Professional (RAW image
processing, viewing and editing software) (hereinafter DPP), which is
linked to start up automatically, where you can check them immediately.
Set the camera’s power switch to < ON >.
1
Click [Starts to download images].
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
EU Main window
C
Introduction
Y
P
O
Remote
Shooting
Preferences
Reference
Save File dialog box
Index
 EU starts up, the main window appears, and your camera and
computer can now communicate. Continue with “Batch
Downloading Images to Your Computer”.
 The camera’s LCD monitor turns on when EU starts up.
 For cameras other than 1D Mk IV
7D
60D
REBELT4i
650D REBELT3i 600D
REBELT2i
550D
REBELT3 1100D ,
you can operate the camera and download images saved on the
memory card inserted in the camera to your computer. Refer to
your camera’s Instruction Manual for details.
500D cannot communicate with EU if the camera’s
 REBELT1i
Mode Dial is set to <
>. Set the Mode Dial to a mode other
than <
>.
 The [Save File] dialog box appears and image downloading to
your computer begins.
 The downloaded images are saved in the [Pictures] folder.
 When all images have been downloaded, DPP starts up
automatically and the downloaded images are displayed in
DPP’s main window.
6
2
Check the downloaded images.
DPP Main window
Introduction
Downloading Selected Images to Your Computer
From the images saved in your camera’s memory card, you can select
the ones you want and download them to your computer.
1 Click [Lets you select and download images].
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
 Check the downloaded images in DPP.
For details on using DPP, refer to the “Digital Photo Professional
Instruction Manual” (PDF electronic manual).
 Continue with “Quitting EU” (p.10).
C
Y
P
O
 A viewer window appears and the images in the memory card
are displayed.
Remote
Shooting
Preferences
Reference
Index
 When you download images, you can change the software that
starts up from DPP to ImageBrowser EX or other software in
preferences ([Linked Software] window) (p.77).
 You can change the save destination for images downloaded and
images to download in preferences ([Destination Folder] window,
[Download Images] window) (p.74, p.75).
 Downloading movie files may take some time due to the large file
size.
7
2
View the images and checkmark images to download.
Viewer window
3
Click the [Download] button.
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
 The [Download image] dialog box appears.
4
Specify the save destination and then click the [OK]
button.
Y
P
O
Displays the save destination on the computer
Download image dialog box
Add check mark
You can click the [
] button and extract images by a variety of
criteria to select images to download.
C
Remote
Shooting
Preferences
Reference
Index
Specify the save destination
 The [Save File] dialog box appears and image downloading to
your computer begins.
8
 The images downloaded to your computer are displayed in the
[Quick Preview] window.
Introduction
Using the Camera to Download Images to Your Computer
If your camera has a direct image transfer function, you can use it to
download to your computer the images saved on the memory card
inserted in the camera. Refer to your camera’s Instruction Manual for
details on its direct image transfer function.
 This function is compatible with
5D Mk II
REBELXS
50D
40D
REBELT1i
1D X
1Ds Mk III
500D
1D Mk III 5D Mk III
REBELXSi
450D
1000D .
your camera and computer, and then start
1 Connect
up EU (p.5).
2 Operate the camera to transfer the images directly.
 The [Quick Preview] window allows you to quickly review the
downloaded images. You can also resize the [Quick Preview]
window.
 When all images have been downloaded, DPP starts up
automatically and the downloaded images are displayed.
 To switch to the main window, click the [Main Window] button in
the viewer window.
Y
P
O
 The images in the camera are saved to your computer.
 When all images have been downloaded, Digital Photo Professional
starts up and the downloaded images are displayed.
C
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
 In step 2, you can batch checkmark several images in sequence.
After clicking the first image you want to download, hold the
< shift > key and click the last image, and [
] will be
displayed. By clicking the [
] button, the selected images will
be checkmarked in a batch.
 For a list of viewer window functions, see p.88.
9
Quitting EU
Downloading Images with a Card Reader
For users with a third-party card reader, you can also download to your
computer images stored in a memory card using the card reader.
However, EU does not support image downloading using a card reader.
For this reason, when downloading images using a card reader, use one
of the following 3 procedures.
1 Click the [Quit] button.
Downloading Images Using ImageBrowser EX
You can use ImageBrowser EX to download to your computer shot
images from a memory card inserted in a third-party card reader
connected to your computer.
For detailed instructions, refer to “ImageBrowser EX User Guide” (PDF
electronic manual).
Contents at
a Glance
1
2
3
4
Downloading
Images
Downloading Images Using Digital Photo
Professional
You can use DPP to download to your computer shot images from a
memory card inserted in a third-party card reader connected to your
computer.
For detailed instructions, refer to “Downloading Images Using Your Card
Reader” in the “Digital Photo Professional Instruction Manual” (PDF
electronic manual).
Introduction
Camera
Settings
Y
2 P
O
C3
 The window closes and EU quits.
Turn the camera’s power switch to < OFF >.
Disconnect the cable from the camera and computer.
Remote
Shooting
Preferences
Reference
 Do not pull on the cable; hold the plug and pull out.
Index
Downloading Images without Using Canon
Software
To download images with a card reader without using Canon software
such as DPP or ImageBrowser EX, copy to your computer the [DCIM]
folder in the memory card.
For more details about folder structures and files in the memory card,
see p.83.
10
2
Setting the Camera from Your Computer
Introduction
This section explains how to set the camera’s functions from EU.
Setting the Camera Owner’s Name, Copyright Notice
and Date/Time............................................................ 12
Available Settings by Camera Model.......................... 13
Setting up Camera Functions .................................. 14
Available Settings by Camera Model.......................... 15
Setting Picture Styles and Applying to the Camera.... 16
C
Selecting a Picture Style and Applying to the
Camera................................................................... 16
Changing Picture Style Settings and Applying to the
Camera................................................................... 17
Applying Picture Style Files to the Camera ............ 18
Saving White Balance to your Computer .................... 19
Registering Personal White Balance in the Camera ... 20
Setting JPEG Quality and Applying to the Camera .... 21
Adjusting White Balance and Applying to the Camera... 22
Registering Lens Aberration Correction/Peripheral Illumination
Correction Data for the Lens in the Camera........................ 22
Y
P
O
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
Setting My Menu and Registering to the Camera ..... 24
11
Setting the Camera Owner’s Name, Copyright Notice and Date/Time
You can set and apply to the camera, the camera owner’s name,
copyright notice and date/time recorded as shooting information in shot
images.
3
Click the [
] button.
Introduction
Capture window
Contents at
a Glance
your camera and computer, and then start
1 Connect
up EU
.
2 Click [Camera settings/Remote shooting].
(p.5)
1
2
3
4
Downloading
Images
Camera
Settings
C
Y
P
O
Remote
Shooting
Preferences
Reference
 The capture window appears.
Index
 The [Set-up menu] appears.
12
4
Click the required setting and specify each one.
Introduction
Owner’s name
 You can enter and set up to 31 characters as the camera owner’s
name.
Set-up menu
Author*
1
 You can enter and set up to 63 characters or symbols, including a
prefix, as the author’s name.
Copyright holder (copyright notice)*1
 You can enter and set up to 63 characters or symbols, including a
prefix, as the photo creation’s copyright holder (copyright notice).
Date/Time/Zone*2
 Available settings are displayed for the camera that is connected.
For more details, see “Available Settings by Camera Model”.
For a list of the capture window functions, see p.91.
Setting
1D Mk III
C

(firmware version 2.0.0 or later) REBELT4i
650D .
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Live View/Movie func. set.*3
 You can set whether the Live View function settings or Movie function
settings (p.27, p.53) are available or not.
1D X
1D Mk IV
5D Mk III
5D Mk II
7D
60D
40D
50D
REBELT4i
REBELXSi
650D
REBELT3i
450D
600D
REBELT2i
REBELXS
550D
REBELT1i
1000D
500D
REBELT3
1100D
Owner’s name
Author*1
Copyright holder
(copyright notice)*1
Date/Time/Zone*2
Live View/Movie func. set.*3
Firmware
Y
P
O
7D
Available Settings by Camera Model
1Ds Mk III
 You can set the camera’s date/time and the time zone where images
were shot.
 You can retrieve the computer’s system time to sync the camera’s
date and time.
 You can set and cancel daylight savings time on 1D X 5D Mk III
Contents at
a Glance

–


–

–









–
Reference
Firmware
 You can display the version of the camera’s firmware.
 You can update the firmware by clicking on this item.
 For more details on updating firmware, refer to the Canon’s website.
Index
*1 When the author or copyright holder (copyright notice) set is not
displayed in full, moving the cursor to the displayed setting item will
display all the entered information as a pop-up.
*2 Area setting is for
or later) REBELT4i
1D X
650D
5D Mk III
7D
(firmware version 2.0.0
only.
*3 Movie function settings are for
1D X
7D
60D
REBELT4i
650D
550D
REBELT1i
500D
REBELT3
1D Mk IV 5D Mk III
REBELT3i
600D
1100D only.
5D Mk II
REBELT2i
13
Setting up Camera Functions
You can set and apply to the camera Picture Styles, personal white
balance, JPEG quality and white balance adjustment.
3
Click the [
] button.
Introduction
Contents at
a Glance
Connect your camera and computer, and then start
up EU (p.5).
1
2 Click [Camera settings/Remote shooting].
1
2
3
4
Downloading
Images
Camera
Settings
 The capture window appears.
C
Y
P
O
Remote
Shooting
Preferences
Reference
Index
 The [Shooting menu] appears.
14
4
Click the required setting and specify each one.
Shooting menu
*1 Setting is possible for 1D X 1D Mk IV , but not for other models.
*2 Setting is possible for 5D Mk III , but not for other models.
Introduction
Picture Style
Contents at
a Glance
 You can set a Picture Style and apply it to the camera, in the same
way as operating from the camera (p.16).
Personal white balance
 You can register to the camera a personal white balance file (p.20).
JPEG quality
 You can set the JPEG image quality and apply it to the camera, in the
same way as operating from the camera (p.21).
White balance adjustment
 Available settings are displayed for the camera that is connected.
For more details, see “Available Settings by Camera Model”.
 You can adjust the white balance, in the same way as operating from
the camera (p.22).
Y
P
O
Registering lens aberration correction/peripheral illumination correction data
For a list of the capture window functions, see p.91.
 You can register lens aberration correction/peripheral illumination
correction data for the lens to the camera or delete registered data
from the camera (p.22).
C
Available Settings by Camera Model
HDR (High Dynamic Range) shooting
Setting
5D Mk III
5D Mk II
7D
60D
1D X
50D
REBELT4i
1D Mk IV
650D
REBELT3i
1Ds Mk III
600D
REBELT2i
1D Mk III
550D
REBELT1i
500D
REBELT3
40D
REBELXSi
 You can shoot photos with a wide dynamic range where clipping in
highlights and shadows has been reduced, and photos that appear
like paintings (p.33).
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
450D
REBELXS
1000D
1100D
Picture Style
Personal white balance
JPEG quality
White balance adjustment
Registering lens aberration
correction/peripheral
illumination correction data
HDR Shooting





–
–
–
–


*1

–
–
*2
–
1
*
15
Setting Picture Styles and Applying to the Camera
You can set and apply Picture Styles to the camera, in the same way as
operating from the camera. You can change the values for [Sharpness],
[Contrast], [Saturation] and [Color tone] of each Picture Style and
register up to three of your own Picture Styles in the camera as userdefined settings.
You can also register Picture Style files in the camera as user-defined
settings you have downloaded from the Canon’s website or created with
Picture Style Editor (Picture Style file creating software) (hereinafter
PSE) and saved to your computer.
For 1D X
REBELT3i
1D Mk IV 5D Mk III
600D
REBELT2i
7D
550D
60D
REBELT3
REBELT4i
2
Introduction
Picture Style window
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
650D
1100D , registering
Picture Styles may take some time.
 The setting is applied to the camera and the display returns to
the [Shooting menu].
Selecting a Picture Style and Applying to the
Camera
1 Click [Picture Style].
Click the Picture Style to be set in the camera.
C
Y
P
O
Remote
Shooting
Preferences
Reference
Index
 The [Picture Style] window appears.
[Auto] appears for Picture Styles only with
REBELT4i 650D REBELT3i 600D .
1D X
5D Mk III
16
Changing Picture Style Settings and Applying
to the Camera
3
Introduction
Contents at
a Glance
You can set your own Picture Style [Sharpness], [Contrast], [Saturation]
and [Color tone] and apply them to the camera, in the same way as
operating from the camera.
1
Click the [Return] button.
 The settings are applied to the camera, and the display returns to
the [Shooting menu].
1
2
3
4
Downloading
Images
Click [Detail set.].
Camera
Settings
 The [Detail set.] dialog box appears.
by clicking the pointer on the slider for each
2 Set
item.
C
Y
P
O
Remote
Shooting
Preferences
Reference
Index
Cursor position
Setting
Default setting
 If you select [Monochrome] for the Picture Style (p.16), the [Filter
effect] and [Toning effect] list boxes appear.
17
Applying Picture Style Files to the Camera
You can register up to three Picture Style files downloaded from the
Canon’s website or created with PSE and saved to your computer, as
user-defined settings in your camera.
3
Click the [
] button.
Introduction
Contents at
a Glance
1 Click [Register User Defined style].
1
2
3
4
Downloading
Images
Camera
Settings
Y
P
O
 The Load Picture Style window appears.
 The [Register User Defined style] dialog box appears.
a tab from one of [User Defined 1]
2 Select
to [User Defined 3].
a Picture Style file and then click the [Open]
4 Select
button.
C
Remote
Shooting
Preferences
Reference
Index
 The Picture Style file is loaded.
18
5
Click the [OK] button.
Introduction
Saving White Balance to your Computer
1D X
1D Mk IV
You can save the adjustment results for an image’s white balance to
your computer as a white balance file (extension “.WBD”). White
balance files saved to your computer can be registered in the camera as
personal white balances (p.20).
Start by registering a white balance in your camera after adjusting it in
the [Remote Live View window] or [Test Shooting] window.
1 Click [Personal WB].
 The Picture Style file is registered in the camera.
C
Y
P
O
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
 The [Personal white balance settings] dialog box appears.
Index
 A Picture Style file is an extended function of Picture Style. For
more details on Picture Style files, refer to the Canon’s website.
 The Picture Style files that you can apply to the camera are files
with the “.PF2” extension only.
 For details on using PSE, refer to the “Picture Style Editor
Instruction Manual” (PDF electronic manual).
19
2
Select the white balance to be saved to your
computer and click the [Save] button.
Introduction
Registering Personal White Balance in the Camera
1D X
1D Mk IV
White balance files created by adjusting the white balance of an image
and saving the results can be registered in the camera as personal
white balances.
1
window that appears, enter a filename, select a
3 Insavethedestination,
and then click the [Save] button.
 The white balance file is saved to your computer.
Click [Personal WB].
1
2
3
4
Downloading
Images
Camera
Settings
Y
P
O
C2
Contents at
a Glance
 The [Personal white balance settings] dialog box appears.
Select the personal white balance to be registered
and click the [Open] button.
Remote
Shooting
Preferences
Reference
Index
 The file selection window appears.
20
3
Open the folder containing the saved white balance
file, select the file and then click the [Open] button.
 The white balance file is loaded.
 The white balance files that you can register to the camera are
files with the “.WBD” extension.
4 Enter a title into the [Title] input field.
5 Click the [Apply to camera] button.
Introduction
Setting JPEG Quality and Applying to the Camera
1D X
1D Mk IV
1Ds Mk III
1D Mk III
You can set the JPEG image quality and apply it to the camera, in the
same way as operating from the camera.
1
Click [JPEG quality].
 The [Personal white balance settings] dialog box closes and the
display returns to the [Shooting menu].
a registered personal white balance on the
7 Select
camera.
 Select a registered personal white balance as the white balance.
 For selecting personal white balance or manual white balance,
refer to “Setting the White Balance” in the camera’s Instruction
Manual provided with your camera.
1
2
3
4
Downloading
Images
Camera
Settings
 The personal white balance is registered on the camera.
 To register another setting, repeat step 2 to step 5.
6 Click the [Close] button.
Contents at
a Glance
Y
P
O
2
C
 The [JPEG Quality] window appears.
Click the setting position.
Remote
Shooting
Preferences
Reference
Index
 The settings are applied to the camera.
 Higher values give a lower compression ratio and higher image
quality for any size.
3 Click [Return].
 The display returns to the [Shooting menu].
21
Introduction
Adjusting White Balance and Applying to the Camera
You can adjust white balance, in the same way as operating from the
camera.
1 Click [WB SHIFT].
Registering Lens Aberration Correction/Peripheral
Illumination Correction Data for the Lens in the Camera
1D X
REBELT4i
1D Mk IV 5D Mk III 5D Mk II
650D
REBELT3i
600D
7D
REBELT2i
60D
550D
50D
REBELT1i
500D
REBELT3 1100D
You can register lens aberration correction/peripheral illumination
correction data for the lens to the camera, or delete registered data from
the camera.
For cameras where [Lens aberration correction] is displayed in the
[Shooting menu], data is registered or deleted for lens peripheral
illumination correction, distortion correction, and chromatic aberration
correction. (Data for distortion correction and chromatic aberration
correction is used during RAW processing on the camera.)
For cameras where [Peripheral illumin. correct.] is displayed in the menu,
only lens peripheral illumination correction data is registered or deleted.
Y
1 P
O
C
Click [Lens aberration correction] or [Peripheral
illumin. correct.].
 The [WB SHIFT] window appears.
2 Click the compensation position.
Compensates
green
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
Compensates
blue
Displays the
compensation
value
Compensates
magenta
Compensates
amber
 The settings are applied to the camera.
3 Click [Return].
Contents at
a Glance
 The display returns to the [Shooting menu].
 To revert the corrected values to the original values, follow the
procedure in step 2.
 The [Register lens aberration correction data] window or
[Register peripheral illumination correction data] window
appears. Lenses for which correction data is registered in the
camera are displayed with a check mark.
 Window names that appear and data to be registered in the
camera differ depending on the camera. However, the following
steps are the same.
22
2
Select the lens category for which you want to
register correction data.
3
Select the lens for which you want to register
correction data and click the [OK] button.
Introduction
Contents at
a Glance
Register lens aberration correction data/Register peripheral
illumination correction data window
1
2
3
4
Downloading
Images
Camera
Settings
 A list appears showing only the selected lens category.
C
Y
P
O
 The correction data for the selected lens is registered in the
camera.
 You can delete correction data from the camera by removing the
check mark from the registered lens and clicking the [OK] button.
Remote
Shooting
Preferences
Reference
Index
 For a list of the [Register lens aberration correction data] window
or [Register peripheral illumination correction data] window
functions, see p.89.
 Lens names displayed in the [Register lens aberration correction
data] window or [Register peripheral illumination correction data]
window may be partially shortened depending on the lens type.
 The EF 15mm f/2.8 Fisheye and EF 8-15mm f/4L USM Fisheye
are not compatible with [Register lens aberration correction data]/
[Register peripheral illumination correction data].
23
Setting My Menu and Registering to the Camera
You can register up to six frequently used menu items as My Menu and
register them to the camera, in the same way as operating from the
camera.
You can register top layer items of each tab as well as all items of
Custom Functions.
3
Click the [
] button.
Introduction
Contents at
a Glance
your camera and computer, and then start
1 Connect
up EU
.
2 Click [Camera settings/Remote shooting].
1
2
3
4
Downloading
Images
(p.5)
Camera
Settings
C
Y
P
O
Remote
Shooting
Preferences
Reference
Index
 The capture window appears.
 The [My Menu] appears.
24
4
Introduction
Click [My Menu settings].
My Menu
Contents at
a Glance
1
2
3
4
Downloading
Images
 The [My Menu settings] window appears.
Camera
Settings
the item to be registered and click the [Add]
5 Select
button.
My Menu settings window
C
 The selected item is added to [Items that can be configured in My
Menu on the camera] on the left side of the window.
 You can register up to six items with the above procedure.
 You can change the position of an item by selecting it and then
clicking the [
] or [
] button to move it.
Y
P
O
Remote
Shooting
Preferences
Reference
Index
6 Click the [Apply to camera] button.
 The setting is applied to the camera.
For a list of the [My Menu settings] window functions, see p.90.
25
3
Remote Shooting by Controlling the Camera from Your Computer
Introduction
Displaying Grid Lines.................................................. 51
From EU you can control the camera remotely, and by viewing the subject
in the EU window, you can set the camera and shoot. You can also shoot
by directly operating your camera even during remote shooting, or preset
a time allowing the camera to shoot automatically with timer shooting.
Remote Live View Shooting ..................................... 27
HDR (High Dynamic Range) Shooting..................... 33
Remote Live View Window Functions...................... 35
Focusing Manually..................................................... 35
Focusing Using AF .................................................... 36
Focusing Using Quick Mode.................................. 36
Focusing Using Live Mode .................................... 38
Focusing Using Face Detection Live Mode ........... 39
Focusing Using Face+Tracking ............................. 39
Focusing Using FlexiZone-Multi ............................ 40
Checking the Depth of Field and Exposure ............... 40
White Balance with the Remote Live View Window .. 41
White Balance for Flash Photography ....................... 41
Displaying an Electronic Level................................... 43
Changing the Aspect Ratio ........................................ 44
Audio Recording Setting ............................................ 45
Audio Recording/Audio Recording Level ............... 46
Wind Filter Function............................................... 46
Overlaid Display Function.......................................... 47
Enlarging/Reducing an Overlay Image .................. 48
Rotating an Overlay Image .................................... 49
Setting the Composite Ratio of an Overlay Image..... 49
Moving an Overlay Image...................................... 50
Displaying a Different Overlay Image .................... 50
Hiding an Overlay Image ....................................... 51
Shooting by Operating the Camera ......................... 52
Shooting Movies ...................................................... 53
Timer-controlled Shooting ....................................... 64
Timer Shooting ........................................................... 64
Interval Timer Shooting .............................................. 64
Bulb Exposures .......................................................... 65
Flash Shooting......................................................... 66
Registering Background Music to a Camera Memory
Card......................................................................... 70
C
Y
P
O
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
26
Remote Live View Shooting
You can control your camera remotely from EU and shoot still images
from your computer screen.
Also, the shot images are saved directly on your computer and you can
recheck them using the linked software Digital Photo Professional
(hereinafter DPP).
This function is effective for shooting large numbers of shots with fixedframing such as for studio shooting.
1
2
Click [Camera settings/Remote shooting].
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Connect your camera and computer, and then turn
the camera’s power switch to < ON >.
Camera
Settings
 EU starts up.
500D cannot communicate with EU if the camera’s
 REBELT1i
Mode Dial is set to <
>. Set the Mode Dial to a mode other
than <
>.
Y
P
O
 The capture window appears.
C
Remote
Shooting
Preferences
Reference
Index
27
3
*1 You can also use the scroll-wheel on your mouse to select
settings for items in the settings window and menus that appear.
You cannot use the scroll-wheel in the mirror lockup menu.
Set the camera.
Drive mode setting
Click  while holding down the
<control> key under the setting
item and select settings from the
menu*1 that appears
( 1D X
7D
60D
50D
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D
REBELT1i
500D
1100D )
Mirror lockup menu display
and setting
Click  while holding down the
<control> key under the setting
item and select settings from the
menu*1 that appears
( 1D X
1D Mk IV 5D Mk III
7D
60D
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D )
1D X
REBELT4i
1D Mk IV 5D Mk III
5D Mk II
REBELT3
*2 On
C
1D Mk IV 5D Mk III
650D
REBELT3i
5D Mk II
600D
7D
REBELT2i
60D
550D
50D
Contents at
a Glance
REBELT1i
500D
REBELT3 1100D , you can click the Exposure level/AEB
level item while holding down the <control> key and perform AEB
setting using the <shift> key + scroll-wheel.
 You can also use the functions of the [Shooting menu] (p.14).
 The settings that cannot be set in the capture window can be set
by operating the camera.
 On 1D X 5D Mk III REBELT4i 650D , a warning lamp blinks
during the countdown for self-timer shooting and the countdown
time is displayed in the area for the number of possible shots.
 Mirror lockup settings are available when the camera mode is P,
Tv, Av, M, A-DEP or B.
 During mirror lockup, the mirror lockup icon blinks.
 When shooting with auto exposure on 1D X 5D Mk III REBELT4i
650D , the shutter speed or aperture blinks to indicate underexposure or over-exposure conditions.
 When shooting with manual exposure on 1D X 5D Mk III
REBELT4i 650D , the metering value is displayed in real time in
the exposure level area.
Y
P
O
Introduction
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
Double-click the setting item,
and select the setting*1 *2
28
4
Click the [
] button.
5
Introduction
Set the Live View function.
 Click [Live View/Movie func. set.], and click [Enable] in the [Live
View shoot.] window that appears.
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Click
C
Remote
Shooting
Y
P
O
Preferences
Live View shoot. window
Reference
Click
Index
 For cameras other than 1 Ds Mk III 1D Mk III
 The [Set-up menu] appears.
REBELXSi
450D
REBELXS
50D
40D
1000D , the [Live View/Movie func.
set.] window appears.
For details on specifying settings, see the next page.
29
Introduction
Live View/Movie func. set. window
1D X
Exposure simulation
Exposure simulation simulates and displays the image with a
brightness close to the actual resulting image.
 Enable
The displayed image brightness will be close to the actual
brightness (exposure) of the resulting image. If you set exposure
compensation, the image brightness will change accordingly.
 Disable
The image is displayed at the standard brightness to make the
Live View image easy to see. Even if you set exposure
compensation, the image is displayed at the standard brightness.
 Enable (DOF preview)
Normally, the image is displayed at the standard brightness to
make the Live View image easy to see. The image will be
displayed close to the actual brightness (exposure) of the
resulting image only while you hold down the depth-of-field
preview button.
1D Mk IV
Select [Stills] for [LV func. setting] and a setting for [Exposure
simulation], and click the [OK] button.
1D X
Select
1D Mk IV
Click
Select
Click
5D Mk II
Select [Stills only] and [Still display], and click the [OK] button.
Select
C
Y
P
O
5D Mk III
7D
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
60D
Select [Enable] for [LV func. setting] and the setting for [Exposure
simulation], then click the [OK] button.
Reference
5D Mk III
Index
Click
Select
Click
30
6
7D
Click the [Live View shoot.] button.
Introduction
Contents at
a Glance
Select
 The [Remote Live View window] appears.
Click
Camera
Settings
60D
Remote Live View window
Select
C
Click
REBELT4i
650D
REBELT3i
500D
REBELT3
1100D
600D
REBELT2i
1
2
3
4
Downloading
Images
550D
Y
P
O
Remote
Shooting
Preferences
Reference
REBELT1i
Index
Select [Enable] and click the [OK] button.
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D
REBELT3
1100D
REBELT1i
Select
Click
500D
Select
Click
31
7
Click the [
Introduction
] button to shoot.
 You cannot operate the camera when the [Remote Live View
window] is displayed. Pressing the Live View shooting button (the
camera’s <SET> button on the 1D Mk IV 1Ds Mk III 1D Mk III
40D
REBELXSi 450D REBELXS 1000D ) will also display the
Live View image on the camera’s LCD monitor, allowing you to
view the image while operating the camera.
 You can shoot by operating the capture window, even if the
[Remote Live View window] is not displayed.
 To perform exposure simulation (p.40) with [Remote Live View
window] or enable display of histograms (p.95), set your camera’s
Custom Function [Live View exposure simulation] to [Enable]. On
1D X
1D Mk IV 5D Mk III 5D Mk II
7D
60D
50D ,
set [Exposure simulation] in the menu to [Enable].
 The shot image is transferred to your computer and displayed in
the [Quick Preview] window. And then, DPP starts up
automatically.
 You can quickly review the shot image in the [Quick Preview]
window displayed before DPP starts up. You can also resize the
[Quick Preview] window.
 You can show/hide the [Quick Preview] window by clicking the
[Other Functions] button in the capture widow and selecting
[Quick Preview] from the menu that appears.
 On
REBELT4i
1D Mk IV
650D
Y
P
O
5D Mk III
REBELT3i
5D Mk II
600D
7D
REBELT2i
60D
50D
550D , you can
also use mirror lockup with remote shooting. (You cannot take
test shots after setting mirror lockup.)
C
 You cannot perform RAW processing. If you connect the camera
to your computer during in-camera RAW processing, the camera
and computer will connect after you finish processing.
 On 60D
REBELT4i 650D REBELT3i 600D
REBELT3 1100D
you cannot set [Creative Auto].
1D X
 On 1D X
possible.
5D Mk III
REBELT4i
650D , self-timer shooting is
 With 1Ds Mk III 1D Mk III , mirror lockup and Silent single shooting
cannot be performed in remote shooting.
 The [Test Shooting] window appears when you click the [Test
shooting] button.
During flash shooting, you can take a test shot under the same
conditions as an actual shot, and adjust the white balance based
on the shot test image (p.41).
 You can save shot images to both your computer and a memory
card by checkmarking [Save also on the camera’s memory card]
in preferences ([Remote Shooting] window) (p.76).
 You can change the software that starts up automatically when
remotely shot images are transferred to your computer from DPP
to ImageBrowser EX or other software in preferences ([Linked
Software] window) (p.77).
 For a list of the [Remote Live View window] functions, see p.95.
 For a list of the [Zoom View] Window functions, see p.97.
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
You can also shoot using the <space> bar on the keyboard.
32
HDR (High Dynamic Range) Shooting
 [Adjust dynamic range]: Sets the range of adjustment for
dynamic range. Select from [Disable HDR], [Auto], [±1], [±2], and
[±3]. When selecting [Auto], the range of adjustment will be set
automatically depending on the image's overall tonal range.
The higher the number, the wider the dynamic range will be.
 [Effect]: Selects the finishing effect. For specific finishing effects,
refer to the pages about HDR (High Dynamic Range) shooting in
the Instruction Manual provided with your camera.
 [Continuous HDR]: If [1 shot only] is selected, HDR shooting is
cancelled automatically after you finish shooting. If you select
[Every shot], HDR shooting is continued until you select [Disable
HDR] in [Adjust dynamic range].
 [Save source images]: To save the three shot images and the
completed HDR image, select [All images]. To save only the
completed HDR image, select [HDR image only].
5D Mk III
You can shoot photos with a wide dynamic range where clipping in
highlights and shadows has been reduced, and photos that appear like
paintings. This is suited for scenes such as still-life and landscape. In
HDR shooting, one shot is taken using three images shot with different
exposures (negative exposure, standard exposure, positive exposure),
and they are combined into a single image automatically. Shot HDR
images are recorded in JPEG quality.
* HDR stands for High Dynamic Range.
1
Set to HDR.
 Select [HDR Mode] in the [Shooting menu], and in the dialog box
that appears, specify the required settings and click the [OK]
button.
C
Y
P
O
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
33
2
Introduction
Take a shot.
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
 The HDR mode cannot be set if you use any of the following
functions: AEB, white balance bracketing, multiple exposures,
flash exposure, bulb exposure, or movie shooting.
 HDR shooting of a moving subject is not recommended because
the movement of the subject will appear as afterimages in the
merged image. HDR shooting is recommended for still subjects.
 In HDR shooting, 3 images are captured with different shutter
speeds set automatically. Therefore, even in Tv and M shooting
modes, the shutter speed will be shifted based on the shutter
speed set.
 To prevent camera shake, the ISO speed may be set higher than
usual.
 Auto image alignment may not work properly with repetitive
patterns (lattice, stripes, etc.) or flat, single-tone images.
 The color gradation of the sky or white walls may not be
reproduced correctly. Irregular colors or noise may appear.
 With HDR shooting, the three images will be merged after you
take a picture. Therefore, it will take a longer time to record the
HDR image than with normal shooting. During the merging of the
images, “BUSY” will be displayed on the camera and you cannot
take another picture until the merging is completed.
C
Y
P
O
 Using a tripod is recommended. For handheld shooting, using a
fast shutter speed is recommended.
 If [Auto Image Align] is set to [Enable] and the HDR picture is shot
handheld, the edges of the photos will be cropped, lowering the
resolution slightly. Also, if the images cannot be aligned properly
due to camera shake, etc., auto image alignment may not take
effect. Note that when shooting with excessively bright or dark
exposure settings, auto image alignment may not work properly.
 If you perform handheld HDR shooting while [Auto Image Align] is
set to [Disable], the 3 images may not be properly aligned and the
HDR effect may be minimal.
 HDR shooting under fluorescent or LED lighting may result in
unnatural color reproduction of the illuminated areas.
 In HDR mode, the options dimmed in the menu cannot be set.
When you set HDR mode, the Auto Lighting Optimizer will be set
automatically to [Disable]. It will revert to the original setting when
you cancel the HDR mode.
 If you perform HDR shooting with the image quality set to RAW,
HDR images are recorded in [ ] quality.
 If you perform HDR shooting with the image quality set to
RAW+JPEG, HDR images are recorded in JPEG quality.
Remote
Shooting
Preferences
Reference
Index
34
Remote Live View Window Functions
These pages explain the functions available in the [Remote Live View
window], including checking the camera settings and focusing while
viewing your subject on the computer screen.
See also the list of [Remote Live View window] functions at the end of
this manual (p.95, p.96).
3
Click the [
] button.
Contents at
a Glance
 The section you selected in step 1 is displayed enlarged at 100%
(actual pixel size) in the [Zoom View] window.
Focusing Manually
You can focus manually while viewing the enlarged image in the
[Remote Live View window].
Zoom View window
Set the lens’s focus mode switch to < AF >.
1
2 Drag [
] to the section you want to enlarge.
Drag
Introduction
C
Y
P
O
 To move the display position in the [Zoom View] window, click on
[
], [
], [
], [
]. You can also move the display position
by dragging the window.
 You can checkmark [Maintain Zoom View] to maintain display of
the [Zoom View] window.
 You can also double-click the section you want to enlarge in step
1 to display an enlarged view at 100% (actual pixel size) in the
[Zoom View] window.
 Double-click an image in the [Zoom View] window to return to the
[Remote Live View window].
 You can checkmark [200%] to view the section enlarged to
200%.
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
35
4
Introduction
Adjust the focus.
Focusing Using AF
1D X
1D Mk IV 5D Mk III
REBELT4i
650D
REBELT3i
500D
REBELT3
1100D
5D Mk II
7D
60D
50D
600D
REBELT2i
550D
REBELT1i
In Quick, Live, Face Detection Live, and other AF modes, images can
be focused automatically in the same way as on the camera itself.
Focusing Using Quick Mode
1D X
Closer
Further away
1D Mk IV 5D Mk III
REBELT4i
650D
REBELT3i
500D
REBELT3
1100D
5D Mk II
7D
60D
50D
600D
REBELT2i
550D
REBELT1i
1 Select [Quick mode] from the list box.
[
], [
]: Adjustment Large amount
[
], [
] : Adjustment Medium amount
[
], [
] : Adjustment Small amount
 The [Remote Live View window] changes in real time according
to the focus position adjustment.
C
Y
P
O
 The AF points appear.
 You can switch between showing and hiding the AF points by
clicking the [
] button.
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
an AF point selection method from the list
2 Select
box.
You can also focus using a key operation on the keyboard.
Adjustment
Closer
Further away
Large amount
<I>
<O>
Medium amount
<K>
<L>
Small amount
<<>
<>>
 Selectable items differ depending on the camera settings.
36
3
Introduction
Click the AF point in the position where you want to
focus.
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Click
 If [Automatic selection] is selected in step 2, all the AF points are
automatically selected.
 If [Manual selection] is selected in step 2, only the selectable AF
points are displayed.
4 Click the [ON] button.
C
Y
P
O
Remote
Shooting
Preferences
Reference
Index
 AF is executed.
 When focus is achieved, the camera makes a beeping sound
and the AF point color changes.
7D
On 1D X 5D Mk III
, cancel the AF point registration
function on the camera if AF points have been registered. When the
camera’s AF points are registered, focusing with AF in the [Remote
Live View window] may not be performed properly.
 Double-clicking an AF point also performs AF.
 To cancel AF operation, click the [OFF] button.
37
Focusing Using Live Mode
1D X
1D Mk IV 5D Mk III
REBELT4i
650D
REBELT3i
500D
REBELT3
1100D
5D Mk II
7D
60D
50D
600D
REBELT2i
550D
REBELT1i
2
Drag the enlargement display frame to move it to the
position where you want to focus.
Introduction
Contents at
a Glance
[Live mode] or [FlexiZone – Single] from the
1 Select
list box.
1
2
3
4
Downloading
Images
Drag
Camera
Settings
 The AF point appears.
 On REBELT4i 650D , you can set continuous AF to on/off with
the [Continuous AF] box. When shooting movies, the
[Continuous AF] box changes to the [Movie servo AF] on/off box.
 You can switch between showing and hiding the AF point by
clicking the [
] button.
Y
P
O
3 Click the [ON] button.
C
Remote
Shooting
Preferences
Reference
Index
 AF is executed.
 When focus is achieved, the camera makes a beeping sound
and the AF point turns green.
 If focus is not achieved, the AF point turns red.
38
Focusing Using Face Detection Live Mode
1D X
REBELT3i
1D Mk IV 5D Mk III
600D
REBELT2i
5D Mk II
7D
60D
50D
550D
REBELT1i
500D
REBELT3
1100D
Focusing Using Face+Tracking
REBELT4i
1
1 Select [Face Detection Live mode] from the list box.
 When a face is detected, an AF point appears.
 When there is a face other than the face detected in the scene, a
new AF point appears if you move the cursor to the position of
the other face. The AF point is selected by clicking that position.
 You can switch between showing and hiding the AF point by
clicking the [
] button.
2
Click the [ON] button.
650D
Select [Face detection + Tracking AF] from the
[Focus] list box.
 When a face is detected, an AF point appears.
 The AF point also tracks the face if the face moves.
 When there is a face other than the face detected in the scene, a
new AF point appears if you move the cursor to the position of
the other face. The AF point is selected by clicking that position.
 You can set continuous AF to on/off with the [Continuous AF]
box. When shooting movies, the [Continuous AF] box changes to
the [Movie servo AF] on/off box.
 You can switch between showing and hiding the AF point by
clicking the [
] button.
Y
P
O
2 Click the [ON] button on the [Focus] list box.
C
Introduction
 AF is executed.
 When focus is achieved, the camera makes a beeping sound
and the AF point turns green.
 If focus is not achieved, the AF point turns red.
 If a face is not detected, the mode changes to [FlexiZone-Multi]
(p.40).
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
 AF is executed.
 When focus is achieved, the camera makes a beeping sound
and the AF point turns green.
 If focus is not achieved, the AF point turns red.
 If the camera cannot detect a face, the AF point is fixed to the
center to focus.
39
Focusing Using FlexiZone-Multi
REBELT4i
650D
This AF mode allows focus to be easily achieved on moving subjects.
You can adjust focus over a wide area, and also divide the area into
zones for focusing.
1
2
Introduction
Checking the Depth of Field and Exposure
You can check the depth of field and exposure in the [Remote Live View
window].
Click the [ON] button.
Select [FlexiZone-Multi] from the [Focus] list box.
 An AF point appears.
 You can click in the window to select an AF zone.
To cancel a selected zone, select [FlexiZone-Multi] again from
the [Focus] list box.
 You can set continuous AF to on/off with the [Continuous AF]
box. When shooting movies, the [Continuous AF] box changes to
the [Movie servo AF] on/off box.
 You can switch between showing and hiding the AF point by
clicking the [
] button.
Click the [ON] button on the [Focus] list box.
 AF is executed.
 When focus is achieved, the camera makes a beeping sound
and the AF point turns green.
 If focus is not achieved, the AF point turns red.
 The number of AF points and zones depend on the selected
aspect ratio and the image being shot (still image/movie).
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
C
Y
P
O
Remote
Shooting
Preferences
Reference
 The aperture value (exposure simulation) is set in the capture
window (p.91).
Index
40
Introduction
White Balance with the Remote Live View Window
You can change the white balance of an image in the [Remote Live View
window] and register the changed white balance in the camera.
1 Select the white balance to apply to the image.
White Balance for Flash Photography
When taking flash shots where the subject is illuminated
instantaneously, you can take a test shot under the same conditions as
an actual shot, and adjust the white balance in the [Test shooting]
window based on the shot test image. Also, you can take a test shot
even when flash is not used.
You can perform the same operation by clicking the [Test shooting] button in
the [Remote Live View window].
1
 The selected white balance is applied to the image displayed in
real time and you can check it in the [Remote Live View window].
2 Checkmark [Apply to shot images].
C
Click the [Other Functions] button and select [Test
shooting] from the menu that appears.
Y
P
O
 The shot image is displayed in the [Test shooting] window.
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Test shooting window
Reference
Index
 The selected white balance is registered in the camera as a
personal white balance and applied to images that will be taken.
41
2
Click the [
] button.
 The click white balance window appears.
4
Introduction
Click the [Apply to camera and execute test
shooting] button.
Contents at
a Glance
Click white balance window
1
2
3
4
Downloading
Images
 A shot will be taken again using the part of the image in step 3
clicked as the standard for white and the shot image is displayed
in the [Test shooting] window.
 The test image will not be saved. To save the test image, click
the [
] button.
 To close the [Test shooting] window, click the [Close] button.
3 Click on a point that is to be the standard for white.
Click
C
Y
P
O
1D X
650D
Remote
Shooting
Preferences
Reference
 You can perform the following operations in the [Test Shooting]
window using keyboard controls.
• Test shooting: <option> + <space>
• 50% image display: < > + <1>
• 100% image display: < > + <2>
• 200% image display: < > + <3>
• Match image size to window: < > + <4>
 On
Camera
Settings
1D Mk IV 5D Mk III
REBELT3i
600D
5D Mk II
REBELT2i
7D
550D
60D
REBELT3
Index
REBELT4i
1100D ,
you can link flash setting/test shooting/white balance adjustment
by simultaneously displaying the [Flash function settings] window
(p.68) and the [Test Shooting] window.
 For a list of the [Test shooting] window functions, see p.98.
42
Introduction
Displaying an Electronic Level
1D X
Contents at
a Glance
5D Mk III
You can display an electronic level in the [Remote Live View window] to
check the tilt of the camera.
1 Click the [
1
2
3
4
Downloading
Images
] button in the [Remote Live View window].
Camera
Settings
 An electronic level is displayed in the [Remote Live View window].
2 Check the tilt of the camera.
Y
P
O
Horizontal level
Position of camera top
C
Vertical level
Camera’s horizontal
position
Preferences
Reference
Vertical reference
Camera’s vertical position
* One horizontal increment is equal to 10°, and one vertical increment is
equal to 5°.
 To adjust horizontal tilt, move the camera so the camera’s horizontal
position and the horizontal reference match.
 To adjust vertical tilt, move the camera so the camera’s vertical
position and the vertical reference match.
 To hide the level, click the [
] button again.
Horizontal
reference
Remote
Shooting
Index
 During movie shooting, the electronic level will not be displayed.
 Even when tilt is corrected, there may be a margin of error of
approx. ±1°.
 If the camera is very tilted, the electronic level’s margin of error
will be bigger.
43
Introduction
Changing the Aspect Ratio
1D X
1D Mk IV
5D Mk III
1Ds Mk III
REBELT4i
650D
REBELT3i
600D
1D Mk III
7D
60D
As with the camera’s Live View function, it is possible to shoot with a
feeling similar to film-type medium-format/large-format cameras such as
6 x 6 cm, 6 x 4.5 cm and 4 x 5 inches. Depending on the connected
camera, there are the following differences.

60D
REBELT4i
650D
REBELT3i
1D X
1D Mk IV
REBELT3i
600D
1
1Ds Mk III
Click the [
1D Mk III
7D
60D
REBELT4i
650D
] button and select the aspect ratio.
 In the [Remote Live View window], the vertical lines of the aspect
ratio you selected are displayed.
600D
1D X
1D Mk IV
1Ds Mk III
1D Mk III
7D
For both RAW and JPEG images, aspect ratio information is only
attached with the shot image, and the image is not trimmed.
 5D Mk III
You can select the two following modes.
[Add aspect ratio information]: JPEG images shot in this mode are
trimmed.
[Add cropping information]: Aspect ratio information is only
attached, and the JPEG images shot
are not trimmed.
With either mode, RAW images will only have aspect ratio information
attached to them, and they will not be trimmed.
1
2
3
4
Downloading
Images
Camera
Settings
For a RAW image, aspect ratio information is only attached with the
shot image, and the image is not trimmed. For a JPEG image, the
image is trimmed.

Contents at
a Glance
C
Y
P
O
Remote
Shooting
Preferences
Reference
Index
2 Move the camera and compose your picture.
 To revert the aspect ratio to as it is normally, click the [
]
REBELT4i 650D REBELT3i 600D , select
button. For 60D
the original aspect ratio; for other cameras, select [Off].
44
Introduction
5D Mk III
1
Click the [
] button.
1D X
 The [Specify Aspect Ratio/Cropping Info] dialog box appears.
2
Audio Recording Setting
Set [Add aspect ratio information] or [Add cropping
information].
650D
You can set the audio recording level when shooting movies in Remote
Live View shooting.
This function can be set only when the camera is in P, Tv, Av, M, or B
shooting mode. You should also refer to the page related to “Setting the
Sound Recording” in your camera’s Instruction Manual.
1
 [Add aspect ratio information] mode trims the JPEG images shot.
 [Add cropping information] mode only attaches aspect ratio
information to the JPEG images shot without trimming them.
 With either [Add aspect ratio information] or [Add cropping
information] selected, RAW images will only have aspect ratio
information attached to the shot images, and they will not be
trimmed.
 Only either one of [Add aspect ratio information] and [Add
cropping information] can be set. When one mode is set, the
other mode will be set to its default automatically.
 Clicking the [Close] button completes the setting.
5D Mk III REBELT4i
C
Click the [Settings] button in the audio recording
area of the [Remote Live View window].
Y
P
O
 The [Recording settings] window appears.
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
3 Move the camera and compose your picture.
45
2
Wind Filter Function
Specify settings.
When you want to reduce the sound of the wind recorded while
shooting outdoors, checkmark the Wind filter function box to enable
the Wind filter function. It will function only when using a built-in
microphone. However, when enabled, low bass sounds are also
partially reduced, and it is recommended that you remove the
check mark from this box in locations with no wind, to disable the
Wind filter function.
From the [Sound recording]
list box, select [Auto],
[Manual], or [Disable]
Wind filter function
Audio recording level
slider
Audio Recording/Audio Recording Level
The audio recording level is adjusted automatically
according to the volume of the sound. When [Auto] is
selected, you can only set the Wind filter function.
[Manual]: Function for advanced users. You can adjust the audio
recording level as desired.
Drag the audio recording level slider while checking the
level meter to adjust the audio recording level. When the
volume is loud, refer to the peak hold function (approx. 3
seconds) while adjusting so that the right side of “12” on
the level meter (-12 dB) lights intermittently. Exceeding
“0” results in sound cracking.
[Disable]: Sound is not recorded.
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Level meter
 Select [Auto], [Manual], or [Disable] from the list box.
 When setting is completed, click the [Close] button to close the
[Recording settings] window.
 An attenuator settings box appears when REBELT4i 650D is
connected. In conditions with much loud sound, sound cracking
may occur even when shooting with [Sound recording] set to
[Auto] or [Manual]. If there is sound cracking, it is recommended
that you checkmark the attenuator function box to enable the
attenuator function.
Introduction
C
Y
P
O
Remote
Shooting
Preferences
Reference
Index
[Auto]:
46
Overlaid Display Function
An image saved in your computer can be overlaid on top of the image
displayed in the [Remote Live View window]. As this function allows you
to accurately align angles, it is useful when shooting several images at
the same angle, such as when shooting product photos. Images loaded
from your computer are only displayed, and are not included in the shot.
2
Select the image you want to display as an overlay
and click the [Open] button.
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
the [Compose] tab sheet in the [Remote Live
1 Select
View window] and click the [Open] button in
Camera
Settings
[Overlay].
C
Y
P
O
 The [Open] dialog box appears.
 RAW*, JPEG, TIFF, BMP (bitmap), and GIF images can be
displayed as an overlay.
* • Only RAW images with the extension “.CR2” shot with a
Canon camera can be displayed as an overlay.
• Images that have been adjusted with Digital Photo
Professional are also displayed in the condition when they
were shot.
 Even with supported image file types, the display of the image as
an overlay may not be possible.
 [Show overlay image] is checkmarked, and the selected image is
displayed as an overlay in the [Remote Live View window].
Remote
Shooting
Preferences
Reference
Index
 The [Open] dialog box appears.
47
Enlarging/Reducing an Overlay Image
An image displayed as an overlay (the overlay image) can be enlarged/
reduced from 25 to 200%. Use the [Enlarge/Reduce] slider to set the
enlargement or reduction.
Drag the [Enlarge/Reduce] slider left or right.
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
 An overlaid image (the overlay image) can be displayed
enlarged/reduced, rotated, or with its composite ratio adjusted
(p.49).
3
Move the camera and subject to compose your
picture.
 You cannot use the Overlaid Display function in the [Zoom View]
window.
C
Y
P
O
 The enlargement/reduction set with the [Enlarge/Reduce] slider
is applied to the overlaid display.
 You can also set the enlargement/reduction by entering a value
directly.
 You can also move the cursor over the slider, click, and then
press the <> or <> key on the keyboard or use the scrollwheel on your mouse to set the enlargement/reduction.
 Clicking the [Reset] button resets the image to its default state.
Remote
Shooting
Preferences
Reference
Index
48
Rotating an Overlay Image
An image displayed as an overlay (the overlay image) can be rotated
from -180° to +180°. Use the [Rotate] slider to set the rotation.
Drag the [Rotate] slider left or right to set.
Setting the Composite Ratio of an Overlay
Image
The composite ratio (transparency) of an image displayed as an overlay
(the overlay image) can be set from 0 to 100%. Use the [Composite
Ratio] slider to set the composite ratio.
Drag the [Composite Ratio] slider left or right to set.
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
 The rotated angle set with the [Rotate] slider is applied to the
overlaid display.
 You can also set the rotated angle by entering a value directly.
 You can also move the cursor over the slider, click, and then
press the <> or <> key on the keyboard or use the scrollwheel on your mouse to set the rotated angle.
 Clicking the [Reset] button resets the image to its default state.
C
Y
P
O
 The composite ratio set with the [Composite Ratio] slider is
applied to the overlaid display.
 You can also set the composite ratio by entering a value directly.
 You can also move the cursor over the slider, click, and then
press the <> or <> key on the keyboard or use the scrollwheel on your mouse to set the composite ratio.
 Clicking the [Reset] button resets the image to its default state.
Remote
Shooting
Preferences
Reference
Index
49
Moving an Overlay Image
Displaying a Different Overlay Image
An image displayed as an overlay (the overlay image) in the [Remote
Live View window] can be moved to a new position. You can also use
the cursor of your mouse to enlarge/reduce or rotate the image.
An image displayed as an overlay (the overlay image) can be changed
to another image.
1 Click the [Move overlay image] button.
1 Click the [Open] button in [Overlay].
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
2
Drag the cursor of your mouse over the overlay
image.
 The overlay image is moved to a new position.
 You can drag the cursor of your mouse in the [Remove Live View
window] in the area outside the overlay image to rotate it.
 You can drag the cursor of your mouse in the corners of the
overlay image to enlarge or reduce it.
 Clicking the [Reset] button resets the image to its default state.
Y
P
O
C2
 The [Open] dialog box appears.
Select the image you want to switch to in the [Open]
dialog box and click the [Open] button.
Remote
Shooting
Preferences
Reference
 The image that was displayed changes to the selected image.
Index
50
Hiding an Overlay Image
Hide an image displayed as an overlay (the overlay image).
1
Remove the check mark from [Show overlay image].
 The overlay image is hidden.
Introduction
Displaying Grid Lines
You can display grid lines in the [Remote Live View window] in the same
way as the camera's Live View function, to check the camera's
horizontal/vertical alignment.
Select the [Compose] tab sheet and checkmark
1 [Show
grid] in [Grid].
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
C
Y
P
O
 Checkmarking [Show overlay image] redisplays the overlay
image.
Remote
Shooting
Preferences
Reference
Index
 Grid lines are displayed in the [Remote Live View window].
51
Shooting by Operating the Camera
2
Select a display method for the grid lines from the
[Grid] list box.
Even when remote shooting is set, you can still operate the camera and
shoot – as when shooting with only the camera. Also, since the shot
images are saved to your computer’s hard disk, you can shoot large
quantities without having to worry about the capacity of the memory card.
1 Display the capture window .
2 Press the camera’s shutter button and take a shot.
Introduction
Contents at
a Glance
(p.27)
 The shot images are transferred to the computer, DPP starts up
automatically, and the shot images are displayed.
 By selecting [Customize grid], you can set the following items.
• Number of grid blocks vertically and horizontally (2-90)
• Grid line thickness (1-10)
• Grid color
• Show/hide diagonal lines
the camera to check its horizontal/vertical
3 Move
alignment.
 To hide the grid lines, remove the check mark from [Show grid].
C
Y
P
O
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
When the [Remote Live View window] is displayed, the camera
cannot be operated. Press the Live View shooting button (the
camera’s <SET> button on the 1D Mk IV 1Ds Mk III 1D Mk III 40D
REBELXSi 450D REBELXS 1000D ), to display the Live View image
on the camera’s LCD monitor and operate the camera.
52
Shooting Movies
Introduction
1D X
1D Mk IV 5D Mk III
5D Mk II
7D
60D
REBELT4i
650D
REBELT3i
REBELT2i
550D
REBELT1i
500D
REBELT3
1100D
600D
The following kinds of movie compression formats are selectable on
.
• ALL-I (I-only): Compresses one frame at a time for recording.
Although the file size will be larger than with IPB,
the movie will be more suited for editing.
• IPB:
Compresses multiple frames at a time efficiently for
recording. Since the file size will be smaller than
with ALL-I, you can shoot longer.
1D X
You can control your camera from EU and shoot movies from your
computer screen. You cannot shoot movies without a memory card in
your camera.
1D X
1D Mk IV
1 Prepare for Live View shooting.
 Follow the procedure from step 1 to step 3 for “Remote Live View
Shooting” (p.27).
2
Click [Live View/Movie func. set.].
4 Click the [OK] button.
5 Click [Live View shoot.].
 The [Live View/Movie func. set.] window closes.
C
 The [Live View/Movie func. set.] window appears.
[Movies] for [LV func. setting], and select the
3 Select
movie recording size from the list box.
Y
P
O
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
 The [Remote Live View window] appears.
 On 1D X , specify audio recording settings as needed.
For specifying audio recording settings, see “Audio Recording
Setting” (p.45).
6 Adjust the focus.
Contents at
a Glance
Index
(p.35, p.36).
53
Introduction
7 Click the [
] button and begin shooting.
 At the bottom left of the [Remote Live View window], a [
and the recording time are displayed.
] icon
Contents at
a Glance
Recording time
1
2
3
4
Downloading
Images
Camera
Settings
 Click the [
] button again to end shooting.
 When the [Remote Live View window] closes, the following
window appears if some image data remains to be downloaded
to your computer.
 After you click the [Download] button, the file names of the image
data shot in movie mode (movie/still image) appear in a list.
C
Y
P
O
After specifying [Destination Folder] and [File Name], click the
[Download] button in the window, and image data will be
downloaded from the camera’s memory card to your computer.
Image data having a check mark removed from its file name are
not downloaded. Afterward, when downloading image data to
your computer from the camera’s memory card, use the method
described on p.6 to p.10 of this Instruction Manual to download.
Remote
Shooting
Preferences
Reference
Index
54
5D Mk II
1
Prepare for Live View shooting.
 Follow the procedure from step 1 to step 3 for “Remote Live View
Shooting” (p.27).
Introduction
Click the [OK] button.
4
5 Click [Live View shoot.].
 The [Live View/Movie func. set.] window closes.
Contents at
a Glance
2 Click [Live View/Movie func. set.].
Camera
Settings
 The [Remote Live View window] appears.
.
6 Adjust the focus.
] button and begin shooting.
7 Click the [
(p.35, p.36)
 The [Live View/Movie func. set.] window appears.
3
Select [Stills+movie] and [Movie display], set the
movie recording size.
1
2
3
4
Downloading
Images
Y
P
O
 At the bottom left of the [Remote Live View window], a [
and the recording time are displayed.
C
Remote
Shooting
] icon
Preferences
Recording time
Reference
Index
 Click the [
] button again to end shooting.
 When the [Remote Live View window] closes, the following
window appears if some image data remains to be downloaded
to your computer.
 You cannot shoot movies when [Screen settings] is set to [Still
display] or [Exposure simulation].
 If the camera firmware is Ver.2.0.0 or later, set the frame rate on
the camera. Note that if the frame rate has been set to 24 fps on
the camera, if you change the movie recording size with EU, the
frame rate will be changed to another setting.
55
 After you click the [Download] button, the file names of the image
data shot in movie mode (movie/still image) appear in a list.
Introduction
5D Mk III
7D
REBELT3
1100D
1 Prepare for Live View shooting.
 Follow the procedure of step 1 and step 2 for “Remote Live View
Shooting” (p.27).
7D , set your camera’s Live View shooting/
 On 5D Mk III
Movie shooting switch to <
>.
2
After specifying [Destination Folder] and [File Name], click the
[Download] button in the window, and image data will be
downloaded from the camera’s memory card to your computer.
Image data having a check mark removed from its file name are
not downloaded. Afterward, when downloading image data to
your computer from the camera’s memory card, use the method
described on p.6 to p.10 of this Instruction Manual to download.
C
Click the [
] button.
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Y
P
O
 The [Remote Live View window] appears.
 On 5D Mk III , specify audio recording settings as needed.
For specifying audio recording settings, see “Audio Recording
Setting” (p.45).
 You cannot operate the camera when the [
] button is
clicked. To operate the camera, click the [
] button again or
close the [Remote Live View window].
 You cannot shoot still photos in movie mode with REBELT3
1100D .
Remote
Shooting
Preferences
Reference
Index
56
Introduction
When setting the movie recording size, click [Live View/Movie
func. set.], and display the [Live View/Movie func. set.] window
before setting.
The following movie compression formats can be selected on
5D Mk III .
• ALL-I (I-only): Compresses one frame at a time for recording.
Although the file size will be larger than with IPB,
the movie will be more suited for editing.
• IPB:
Compresses multiple frames at a time efficiently for
recording. Since the file size will be smaller than
with ALL-I, you can shoot longer.
.
3 Adjust the focus.
] button and begin shooting.
4 Click the [
Y
P
O
C
1
2
3
4
Downloading
Images
Camera
Settings
(p.35, p.36)
 At the bottom left of the [Remote Live View window], a [
and the recording time are displayed.
Contents at
a Glance
Remote
Shooting
] icon
Recording time
 Click the [
] button again to end shooting.
 When the [Remote Live View window] closes, the following
window appears if some image data remains to be downloaded
to your computer.
Preferences
Reference
Index
Select
Click
 Selectable movie recording sizes depend on the camera.
 After you click the [Download] button, the file names of the image
data shot in movie mode (movie/still image) appear in a list.
57
Introduction
60D
1 Prepare for Live View shooting.
 Follow the procedure of step 1 and step 2 for “Remote Live View
Shooting” (p.27).
2 Click the [
] button.
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
 The [Remote Live View window] appears.
After specifying [Destination Folder] and [File Name], click the
[Download] button in the window, and image data will be
downloaded from the camera’s memory card to your computer.
Image data having a check mark removed from its file name are
not downloaded. Afterward, when downloading image data to
your computer from the camera’s memory card, use the method
described on p.6 to p.10 of this Instruction Manual to download.
C
Y
P
O
You cannot operate the camera when the [
] button is clicked.
To operate the camera, click the [
] button again or close the
[Remote Live View window].
Remote
Shooting
Preferences
Reference
Index
58
Introduction
When setting the movie recording size, movie shooting mode,
etc., click [Live View/Movie func. set.], and display the [Live View/
Movie func. set.] window before setting.
Note the following when you set the movie recording size to [Movie
Crop 640 x 480].
• The Movie crop image cannot be magnified for focusing.
• Two AF modes can be selected, [Live mode] (p.38) and [Face
Detection Live mode] (p.39).
• AF mode automatically switches to [Live mode] (p.38) when in
[Quick mode] (p.36).
• Still photos cannot be taken.
• The movie recording size icon appears as [
].
] button and begin shooting.
 At the bottom left of the [Remote Live View window], a [
and the recording time are displayed.
C
Y
P
O
1
2
3
4
Downloading
Images
Camera
Settings
Adjust the focus (p.35, p.36).
3
4 Click the [
Contents at
a Glance
] icon
Recording time
 Click the [
] button again to end shooting.
 When the [Remote Live View window] closes, the following
window appears if some image data remains to be downloaded
to your computer.
Remote
Shooting
Preferences
Reference
Index
Select
Click
 After you click the [Download] button, the file names of the image
data shot in movie mode (movie/still photo) appear in a list.
59
Introduction
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D
1 Prepare for Live View shooting.
 Follow the procedure of step 1 and step 2 for “Remote Live View
Shooting” (p.27).
2 Click the [
] button.
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
After specifying [Destination Folder] and [File Name], click the
[Download] button in the window, and image data will be
downloaded from the camera’s memory card to your computer.
Image data having a check mark removed from its file name are
not downloaded. Afterward, when downloading image data to
your computer from the camera’s memory card, use the method
described on p.6 to p.10 of this Instruction Manual to download.
C
 The [Remote Live View window] appears.
 On REBELT4i 650D , specify audio recording settings as
needed.
For specifying audio recording settings, see “Audio Recording
Setting” (p.45).
Y
P
O
You cannot operate the camera when the [
] button is clicked.
To operate the camera, click the [
] button again or close the
[Remote Live View window].
Remote
Shooting
Preferences
Reference
Index
60
When setting the movie recording size, click [Live View/Movie
func. set.], and display the [Live View/Movie func. set.] window
before setting.
Introduction
 Note the following when you set the movie recording size to
[Movie Crop 640 x 480] on REBELT2i 550D .
• The Movie crop image cannot be magnified for focusing.
• Two AF modes can be selected, [Live mode] (p.38) and [Face
Detection Live mode] (p.39).
• AF mode automatically switches to [Live mode] (p.38) when in
[Quick mode] (p.36).
• Still photos cannot be taken.
• The movie recording size icon appears as [
].
 The following operations are not available when Movie Digital
Zoom is set on REBELT3i 600D .
• Remote Live View display
• AF focusing
• Shooting still photos
 In EU, Video Snapshot shooting is not available on REBELT4i
650D REBELT3i 600D .
Y
3OP
C4
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Adjust the focus. (p.35, p.36).
Click the [
Contents at
a Glance
] button and begin shooting.
 At the bottom left of the [Remote Live View window], a [
and the recording time are displayed.
Reference
] icon
Recording time
Index
Select
Click
 Click the [
] button again to end shooting.
 When the [Remote Live View window] closes, the following
window appears if some image data remains to be downloaded
to your computer.
61
Introduction
REBELT1i
500D
1 Prepare for Live View shooting.
 Follow the procedure of step 1 and step 2 for “Remote Live View
Shooting” (p.27).
 After you click the [Download] button, the file names of the image
data shot in movie mode (movie/still image) appear in a list.
2 Set the camera’s Mode Dial to <
>.
 When setting the movie recording size, click [Live View/Movie
func. set.], display the [Live View/Movie func. Set.] window
before setting.
C
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Y
P
O
Preferences
Reference
Index
After specifying [Destination Folder] and [File Name], click the
[Download] button in the window, and image data will be
downloaded from the camera’s memory card to your computer.
Image data having a check mark removed from their file name
are not downloaded. Afterward, when downloading image data to
your computer from the camera’s memory card, use the method
described on p.6 to p.10 of this Instruction Manual to download.
Select
Click
62
3
Introduction
Click [Live View shoot].
Contents at
a Glance
1
2
3
4
Downloading
Images
 The [Remote Live View window] appears.
.
4 Adjust the focus.
] button and begin shooting.
5 Click the [
Camera
Settings
(p.35, p.36)
 At the bottom left of the [Remote Live View window], a [
and the recording time are displayed.
] icon
Recording time
C
 Click the [
] button again to end shooting.
 When the [Remote Live View window] closes, the following
window appears if some image data remains to be downloaded
to your computer.
Y
P
O
After specifying [Destination Folder] and [File Name], click the
[Download] button in the window, and image data will be
downloaded from the camera’s memory card to your computer.
Image data having a check mark removed from its file name are
not downloaded. Afterward, when downloading image data to
your computer from the camera’s memory card, use the method
described on p.6 to p.10 of this Instruction Manual to download.
Remote
Shooting
Preferences
Reference
Index
 After you click the [Download] button, the file names of the image
data shot in movie mode (movie/still image) appear in a list.
63
Timer-controlled Shooting
Two types of timer shooting are available where the camera
automatically takes shots at a specified time or a specified number.
Timer Shooting
You can automatically take a shot when the specified time elapses.
Display the capture window (p.27).
1
2 Click the [ ] button.
3 Enter a delay time and click the [Start] button.
 The [Timer shooting settings] dialog box appears.
 Enter a value between 0 seconds and 99 minutes and 59
seconds in one-second increments.
 The shot is taken when the specified time elapses.
Introduction
Interval Timer Shooting
You can automatically take shots by setting the interval between shots
and the number of shots to be taken.
1 Display the capture window .
2 Click the [ ] button.
3 Checkmark [Interval timer shooting].
4 Enter the shooting interval and the number of shots.
(p.27)
 The [Timer shooting settings] dialog box appears.
Y
P
O
C5
 Enter a value between 5 seconds and 99 minutes and 59
seconds in one-second increments.
 The minimum number of interval-timed shots is two. The number
of shots you can take at timed intervals depends on the available
space on your computer’s hard disk.
Click the [Start] button.
 The shots are taken at the specified intervals and for the
specified number of shots.
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
On certain types of computer, if you set a short interval between
shots and there is insufficient time to transfer and save the images,
it may not be possible to take shots at the specified interval. In this
case, set a longer interval between shots and take the shots again.
The shooting mode cannot be changed when the [Timer shooting
settings] dialog box is displayed.
Display the [Timer shooting settings] dialog box after setting the
shooting mode.
64
Bulb Exposures
1 Display the capture window .
2 Double-click the shooting mode icon and select [BULB].
3
Set the desired aperture.
(p.27)
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
 Specify the following settings for cameras other than
1D X
1D Mk IV 1Ds Mk III 1D Mk III .
• For cameras with < B > (bulb) on the Mode dial, set to < B >.
• For cameras without < B > (bulb) on the Mode dial, set the
Mode dial to < M > (manual), and select [BULB] in the capture
window or set the camera’s shutter speed to [BULB].
Y
P
O
4 Click the [ ] button.
5 Enter the exposure time and click the [Start] button.
C
 The [Timer shooting settings] dialog box appears.
 Enter a value between 5 seconds and 99 minutes and 59
seconds in one-second increments.
Remote
Shooting
Preferences
Reference
Index
You can start/end bulb exposure without setting an exposure time
by clicking the [
] button.
65
Flash Shooting
1D X
1D Mk IV 5D Mk III
5D Mk II
7D
60D
REBELT4i
650D
REBELT3i
REBELT2i
550D
REBELT3
1100D
600D
4
Click the [
] button.
Introduction
Contents at
a Glance
From EU you can set the camera’s flash functions, as well as EX-series
Speedlite (sold separately) compatible with flash function setting, in
order to perform flash shooting.
For more details on setting items, also refer to the Instruction Manual
provided with your EX-series Speedlite and with your camera.
1
2
3
4
Downloading
Images
1 Prepare your camera and flash.
your camera and computer, and then start
2 Connect
up EU
.
3 Click [Camera settings/Remote shooting].
Camera
Settings
 When using an external flash, mount it on your camera.
(p.5)
C
Y
P
O
Remote
Shooting
Preferences
Reference
Index
 The capture window appears.
 The [Flash control menu] appears.
66
5
Introduction
Click [Flash function settings].
Flash control menu
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
 When REBELT4i 650D REBELT3i 600D is connected, [Built-in
flash] is also displayed.
You can change the way you set the built-in flash functions by
selecting setting items displayed in [Built-in flash].
Refer to your camera’s Instruction Manual for details on setting
items ([NormalFiring], [EasyWireless], [CustWireless]).
 The [Flash function settings] window appears.
C
Y
P
O
Remote
Shooting
Preferences
Reference
Index
Select [Raise built-in flash] to use the built-in flash on
60D
REBELT3
REBELT4i
1100D .
650D
REBELT3i
600D
REBELT2i
7D
550D
67
Introduction
6 Specify settings.
Flash function settings window
The window displayed differs depending on the connected camera and flash.
Check that this box is
checkmarked
Contents at
a Glance
1
2
3
4
Downloading
Images
Click setting items, and
select settings from the
menu that appears*
Camera
Settings
Enable the wireless
function, click the setting
items, and then select
settings from the menu
that appears*
C
Y
P
O
Remote
Shooting
Preferences
Reference
[Wireless func.] button
1D X
1D Mk IV 5D Mk III
5D Mk II
REBELT2i
550D
REBELT3
1100D
To enable the wireless function, click the button and select [Enable] from the menu that
appears. To cancel, select [Disable] from the menu.
7D
60D
REBELT4i
650D
REBELT3i
Index
600D
To enable the wireless function, click the button and select the flash combination from the
menu that appears. To cancel, select [Disable] from the menu.
To enable the wireless function for the built-in flash on the REBELT4i 650D REBELT3i
600D , select [Built-in flash] in [Flash control menu], then select [EasyWireless] or
[CustWireless]. To cancel, select [NormalFiring].
* You can also use the scroll-wheel on your mouse to select settings for items in the
settings window that appears.
68
Introduction
If the [Flash control] menu is displayed on the camera’s LCD
monitor, EU [Flash function settings] window automatically closes.
 You can use modeling flash by clicking the [Modeling flash]
button. You should only use modeling flash for a maximum of 10
times continuously. (For more information, refer to the Instruction
Manual provided with the flash.)
 Information displayed in the [Flash function settings] window is
updated by clicking the [
] button, so it is synchronized with
the current flash settings. (Since setting changes made with the
flash unit are not reflected in the [Flash function settings] window,
you can click the [
] button and update the [Flash function
settings] window to match the current flash settings.)
 You can name and save the flash setting as a file separate from
the image by clicking the [Save] button. You can also click the
[Load] button and load this file into EU for use in other shooting.
 You can use flash shooting and Remote Live View shooting (p.27)
together.
However, you cannot use modeling flash during Remote Live
View shooting.
 Settings that can be performed in the [Flash function settings]
window differ depending on the flash and camera.
7 Click the [
] button to shoot.
Contents at
a Glance
1
2
3
4
Downloading
Images
C
 The shot image is transferred to your computer and displayed in
the [Quick Preview] window. Then, DPP starts up automatically.
 When the capture window AF/MF selector is set to [AF], AF/AE is
executed when the cursor is moved to the [
] button. (p.91)
 You can quickly review the shot image in the [Quick Preview]
window displayed before DPP starts up. You can also resize the
[Quick Preview] window.
 You can show/hide the [Quick Preview] window by clicking the
[Other Functions] button in the capture widow and selecting
[Quick Preview] from the menu that appears.
Y
P
O
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
 For a list of [Flash function settings] window functions, see p.93.
 You can also shoot using the <space> bar on the keyboard.
69
Registering Background Music to a Camera Memory Card
REBELT4i
650D
REBELT3i
Register Background Music window
600D
You can register WAV-format music files, saved to your computer, to the
camera’s memory card as background music. Registered background
music can be played together with a Video Snapshot Album or
slideshow played on the camera.
1
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Connect your camera and computer, and then start
EU (p.5).
 If your camera and computer are not connected, [Register
Background Music] is not displayed.
Camera
Settings
2 Click [Register Background Music].
3
C
Edit [List of background music to register].
Y
P
O
Adding New Music Files
 Click the [Add] button, select a music file in the [Open] dialog box
that appears, and then click the [Open] button.
Remote
Shooting
Preferences
Reference
Index
 The [Register Background Music] window appears.
 When the [EOS Sample Music] folder is installed to your
computer, five tracks appear in [List of background music to
register] the first time as EOS Sample Music.
 When the camera is in movie shooting mode, registering
background music is not possible.
 A music file is added to [List of background music to register].
 You can also directly drag and drop a music file saved anywhere
in your computer to add it to [List of background music to
register].
 Music can be added only one track at a time.
 A total of 20 tracks can be added, each up to 29 minutes 59
seconds long.
70
Changing the Playback Order of Music Files
 Select a music file in [List of background music to register], and
then click the [
] or [
] button.
Editing Track Names of Music Files
 Select a music file in [List of background music to register], click
the [Edit track Name] button and enter a track name up to 25
characters (single-byte). Then, click the [OK] button.
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
 The order of the music files changes.
 You can also directly drag and drop music files within the [List of
background music to register] to change the order.
Deleting Music Files
 Select a music file in [List of background music to register], and
then click the [Remove] button.
C
Y
P
O
 The track name for the music file changes.
 You can also display the [Edit Track Name] dialog box by
double-clicking a music file in the [List of background music to
register].
Playing Music Files
 Select a music file in [List of background music to register], and
then click the [Play] button.
Remote
Shooting
Preferences
Reference
Index
 The music file is deleted from [List of background music to
register].
 The music file plays.
71
Adding EOS Sample Music
 Click the [EOS Sample Music] button.
 Music files already registered on the camera’s memory card are
overwritten as music files are registered.
 Registering music files to your camera one track at a time is not
possible.
5 Click the [Close] button.
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
 The [Register Background Music] window closes.
 The EOS Sample Music on your computer is added to [List of
background music to register].
 This operation cannot be performed if EOS Sample Music is not
installed on your computer.
4 Click the [Register] button.
C
Y
P
O
Remote
Shooting
Preferences
Reference
Music copied through this function may not be used without
permission from the copyright holder, except for cases permitted
under applicable laws, such as for personal use.
Index
Music files meeting the following requirements may be registered to
the camera’s memory card.
 The music files in [List of background music to register] are
registered (copied) to the camera's memory card.
File format
Music file export: WAVE (.wav, .wave)
files in linear PCM
File time limit
Up to 29 min. 59 sec. per one file
File number limit
Up to 20 files
Channels
2 channels
72
4
Preferences
Introduction
You can change each of the EU functions on each window of the
preferences window to make them easier to use.
Preferences ............................................................. 74
Basic Settings............................................................. 74
Destination Folder ...................................................... 74
File Name ................................................................... 75
Download Images....................................................... 75
Remote Shooting........................................................ 76
Linked Software.......................................................... 77
Time Settings.............................................................. 77
C
Y
P
O
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
73
Preferences
Introduction
1 On the main window, click the [Preferences] button.
the required settings and click the [OK]
2 Specify
button.
 The [Preferences] dialog box appears.
 The settings are applied to EU.
Basic Settings
You can specify the operation when EU starts up and whether the auto
power off function is enabled or disabled.
C
 When [Show [Lets you select and download images] screen] is
selected in [Startup Action], the viewer window (p.88) appears.
 When [Show [Camera settings/Remote shooting] screen] is
selected in [Startup Action], the capture window (p.91) appears.
 When [Execute [Starts to download images]] is selected in
[Startup Action], the [Save File] dialog box (p.6) appears and
downloading to your computer begins. When all the images have
been downloaded, DPP starts up automatically and the
downloaded images are displayed in DPP’s main window.
 If you checkmark [Auto power off], the camera’s auto power off
function is enabled. If you remove the check mark, the auto power
off function remains disabled, even if you set the auto power off
function on the camera (only when the camera is connected to a
computer.).
 If you remove the check mark from [Automatically display Quick
Preview window], the [Quick Preview] window will no longer
appear during Remote Live View shooting or when loading
images.
 If you checkmark [Register WFT Pairing Software in Login
Options], the WFT pairing software is added to the login items
displayed when the [Accessories] tab sheet is selected in the
main window.
Y
P
O
Destination Folder
You can specify the save destination folder of images downloaded from
your camera or of images shot remotely.
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
74
Introduction
 You can also specify a save destination folder by entering text
directly in the textbox for the save destination folder.
 To specify a save destination folder, click the [Browse] button.
After you click the [Browse] button and specify a save destination
folder, a subfolder is created automatically below the save
destination folder you specified.
 After you checkmark any of [Download Images], [Remote
Shooting], or [Monitor Folder], a subfolder is generated when the
checkmarked function is used.
 You can select the naming rule for a generated subfolder from the
list box. You can also customize the naming rule for subfolders by
clicking the [Customize] button.
 If you are using the shooting date for a generated subfolder, you
can specify the format (order and style for year-month-date) and
dividing characters.
 When specifying an image’s file name, select a naming rule for the
file from the list box. (If [Do not modify] is selected, images are
saved with the file name set in the camera.) You can also customize
the naming rule for files by clicking the [Customize] button.
 You can set prefix characters, number of digits for serial numbers,
and the start number individually for file names.
 If you are using the shooting date in file names, you can specify
the format (order and style for year-month-date) and dividing
characters.
Download Images
From the list box, you can select the images to be downloaded when
[Starts to download images] in the main window is clicked.
File Name
You can specify the file name of images downloaded from your camera
or of images shot remotely.
C
Y
P
O
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
[Images whose transfer settings were specified with the camera] in
the [Settings for downloaded images] menu is only enabled for
cameras capable of direct transfer of shot images. Refer to your
camera's Instruction Manual for details.
75
Introduction
Remote Shooting
 If you checkmark [Save also on the camera’s memory card],
images shot during remote shooting will also be saved to the
camera’s memory card.
 If you checkmark [In RAW+JPEG mode, only transfer JPEGs to
the computer], only the JPEG image of images shot in
RAW+JPEG recording quality with remote shooting will be
transferred to your computer.
 If you checkmark [Rotate image], you can set a function that
rotates shot images regardless of the camera’s position during
shooting. Set the rotation angle in the capture window (p.91).
 If you checkmark [Start Live View], the [Remote Live View
window] automatically appears when the camera’s Live View
starts up.
 Is you checkmark [Stop Live View], the [Remote Live View
window] automatically closes when the camera’s Live View ends.
You can set operations performed during remote shooting.
Y
P
O
On
C
1D X
1D Mk IV
5D Mk III
7D
60D
REBELT4i
650D
REBELT3i 600D REBELT2i 550D
REBELT3 1100D , if the
camera’s Live View display is active when Remote Live View
ends, the camera’s Live View display also ends.
 If you checkmark [Disable mouse wheel operations], you can no
longer use the scroll-wheel on your mouse over the capture
window display/control buttons or the [Flash function settings]
window.
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
76
Introduction
Linked Software
From the list box, you can select the linked software that starts up when
images are downloaded from the camera or when images are shot
remotely. Also, you can register third-party software as linked software
by clicking the [Apply] button.
Time Settings
You can specify settings for clock time when connected to a camera.
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
C
Y
P
O
Remote
Shooting
Preferences
Reference
Index
In the window displayed when you click the [Apply] button, you can
specify the type of images to be posted when linked third-party
software is started up.
 When you select [Notify me if the time does not match], you can
set the number of minutes, from 1 to 60 minutes, for which the
camera clock and computer clock are out of sync before you are
notified.
When you start up EU, the camera clock and computer clock are
compared. If the time difference exceeds the set number of
minutes, a notification dialog box is displayed.
 When you select [Always match the computer time], the camera
is set to the computer’s time when you start up EU.
77
Reference
Introduction
This reference section has been provided to enhance your experience using EU.
It contains various troubleshooting solutions, how to delete EU from your
computer and explanations of the various windows.
An index is provided at the end of the chapter for you to easily find information
you are looking for.
C
Troubleshooting....................................................... 79
Monitor Folder Function (Function for Use with the
WFT-E2, WFT-E2 II, WFT-E3, WFT-E4, WFT-E4 II,
WFT-E5, WFT-E6, or WFT-E7) ............................... 81
Function for Use with the Accessories .................... 82
Folder Structure and File Names in the Memory Card ..... 83
Uninstalling the Software......................................... 83
Fixing the Plug to the Camera ................................. 84
List of Main Window Functions................................ 87
List of Viewer Window Functions............................. 88
List of Register Data Window Functions for Lens
Aberration and Peripheral Illumination Correction... 89
List of My Menu Settings Window Functions........... 90
List of Capture Window Functions........................... 91
Exposure Level/AEB Level ..................................... 92
List of Flash Function Settings Window Functions ...... 93
List of Remote Live View Window (Live View Tab) Functions..... 95
List of Remote Live View Window (Compose Tab) Functions..... 96
List of Zoom View Window Functions...................... 97
List of Test Shooting Window Functions ................. 98
Index........................................................................ 99
About This Instruction Manual .............................. 100
Trademark Acknowledgments .............................. 100
Y
P
O
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
78
Troubleshooting
If EU is not operating correctly, see the items below.
Installation could not be completed correctly
 You cannot install software unless you are logged into an account
with Administrator privileges. Log in again into an account with
Administrator privileges.
For how to log in and how to specify Administrator settings, refer to
the User’s Manual for the Macintosh computer or for Mac OS X.
EU does not start up
 If you installed other software and EU no longer automatically starts
up even if you connect your camera and computer, use the Image
Capture (standard Macintosh software) settings to set the software
that starts up at camera connection to [Camera Window] or [EOS
Utility]. This must be set for each camera you will connect. You can
disable EU from starting up automatically by selecting an option other
than [Camera Window] or [EOS Utility].
The card reader does not detect the SD card.
 Depending on the card reader and computer OS used, SDXC cards
might not be correctly detected. In such a case, connect your camera
and computer with the provided interface cable, and transfer the
images to your computer.
Introduction
EU and the camera are not communicating
 EU does not operate correctly on a computer if its system
requirements are not met. Use EU on a computer with compatible
system requirements (p.2).
 Push the plug of the interface cable all the way into the socket. Loose
connections can cause faults and malfunctions (p.5).
 Check that the camera’s power switch is < ON > (p.6).
 EU and the camera may not communicate normally with a cable other
than the EOS DIGITAL camera-dedicated Canon interface cable
(p.5).
Y
P
O
 Connect your camera and computer directly with the interface cable
provided with your camera. Do not connect the camera via a hub;
doing so may prevent EU and your camera from communicating
normally.
C
 If you connect multiple USB devices (not including the mouse or
keyboard) to your computer, the camera may not communicate
normally. If the camera cannot communicate normally, disconnect
USB devices other than the mouse or keyboard from your computer.
 Do not connect more than one camera to the same computer. Two or
more cameras may not operate normally.
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
 Do not connect your camera with the computer while performing
“Linked shooting” with a WFT series Wireless File Transmitter (sold
separately). Your camera may not operate normally.
 If there is insufficient charge left in the camera battery, the camera
cannot communicate with EU. Either replace with a fully charged
battery or use the AC adaptor kit provided with your camera. Your
computer does not supply power to the camera through the interface
cable.
79
Introduction
Communication between EU and the camera disconnected
 Operation of the auto power off function will automatically switch the
camera off, disabling communication with EU, if you turn the auto
power off function to [ON]. Remove the check mark from [Auto power
off] in the preferences ([Basic Settings] window) (p.74) or set the auto
power off function in the camera to [OFF].
Remotely shot images using EU are not displayed in DPP
 In Digital Photo Professional, select the [Tools] menu  [Sync folder
with EOS Utility].
1
2
3
4
Downloading
Images
 If you do not perform any operation while the camera and computer
are connected, depending on the computer system, a confirmation
message may appear on the screen asking whether you wish to
continue communicating with the camera. If you do not perform an
operation while this message appears, communication with your
camera is discontinued and EU shuts down. In this case, turn the
camera’s power switch to < OFF >, then again to < ON > and start up
EU.
 Do not put your computer to sleep while it is connected to the camera.
If your computer goes into sleep mode, never disconnect the interface
cable while your computer is still in sleep mode. Always wake your
computer up while it is still connected to the camera. Depending on
the type of computer, disconnecting the interface cable while your
computer is in sleep mode could prevent the computer from waking
up correctly. Refer to the computer User’s Manual for more
information on sleep mode.
Contents at
a Glance
Camera
Settings
C
Y
P
O
Remote
Shooting
Preferences
Reference
Index
A non-Canon flash does not fire during Remote Live View shooting
 When a non-Canon flash is mounted on the camera for Remote Live
View shooting, set [Silent shooting] in the camera to [Disable].
80
Monitor Folder Function (Function for Use with the WFT-E2, WFT-E2 II, WFT-E3, WFT-E4, WFT-E4 II, WFT-E5, WFT-E6, or WFT-E7)
This is a function for checking your images with Digital Photo
Professional (hereinafter DPP) in real time using the Wireless File
Transmitter WFT-E2, WFT-E2 II, WFT-E3, WFT-E4, WFT-E4 II, WFTE5, WFT-E6, or WFT-E7 (sold separately).
For setting the WFT-E2, WFT-E2 II, WFT-E3, WFT-E4, WFT-E4 II, WFTE5, WFT-E6, or WFT-E7 refer to the Instruction Manual provided with
each product.
1
 You can specify the save destination folder for the shot images
set in the WFT-E2, WFT-E2 II, WFT-E3, WFT-E4, WFT-E4 II,
WFT-E5, WFT-E6, or WFT-E7.
3
Click the [Change] button and specify the transfer
destination folder.
Contents at
a Glance
1
2
3
4
Downloading
Images
Click [Monitor Folder].
4 Click the [
5 Take a shot.
] button.
 Image transfer preparation is complete.
C
Y
P
O
 If images are saved in the folder specified in step 2, they are
transferred/saved in the folder specified in step 3.
 DPP starts up and the images saved in the folder specified in
step 3 are displayed.
 The [Monitor Folder] dialog box appears.
2
Introduction
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
Click the [Browse] button and specify the save
destination folder for shot images.
You cannot specify the same folders in step 2 and step 3.
You can change the software that starts up in step 5, from DPP to
ImageBrowser EX or other software in preferences ([Linked
Software] window) (p.77).
81
Function for Use with the Accessories
If you have the Wireless File Transmitter WFT-E2, WFT-E2 II, WFT-E3,
WFT-E4, WFT-E4 II, or WFT-E5 (sold separately), you can start up the
previously mentioned accessory software from EU. And you can also
start up the Picture Style Editor (Picture Style file creating software).
For details on using each software, refer to the instruction manual for
the software. For Picture Style files, see p.18.
3
Click the software you want to start up.
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Connect your camera and computer, and then start
up EU (p.5).
1
2 Click the [Accessories] tab.
Camera
Settings
Y
P
O
b
 The clicked software starts up.
C
Remote
Shooting
Preferences
Reference
Index
 The [Accessories] tab sheet appears.
82
Folder Structure and File Names in the Memory Card
Uninstalling the Software
Images shot with the camera are saved in the memory card’s [DCIM]
folder with the following folder structure and file names. Refer to the
following when copying images to your computer using a card reader.
 Before starting the software uninstallation, quit all programs you are
using.
 To uninstall the software, log into the account used when installation
was performed.
 When you have moved the folders and the software to be deleted to
the Trash, select the [Finder] menu  [Empty Trash] and empty the
Trash. You cannot reinstall the software until you have emptied the
Trash.
File name
File type
****YYYY.JPG
JPEG image file
****YYYY.CR2
RAW image file
****YYYY.MOV
MOV movie file
****YYYY.THM
Thumbnail file
****YYYY.WAV
Audio file
 The camera specific character string set at the
time of factory shipment or set in the camera
appears in “****” of the file name.
 The “YYYY” in the file names represents a
number between 0001 and 9999.
Contains a file allowing the camera to manage the
images in the [DCIM] folder.
EOSMISC
 The “xxx” in the folder names represents a number between 100
and 999.
 For the 1D series cameras, the folder structure is the same for
CF cards and SD cards.
 When you perform DPOF settings on the camera, a [MISC] folder
is created. The files that manage the DPOF settings are saved in
the [MISC] folder.
 When you register background music on REBELT4i 650D
REBELT3i 600D , a MUSIC folder is generated for registering
music files and WAV files are saved there.
 A thumbnail file is a file saved with the same file name as the
movie and that includes shooting information. When a movie is
7D
REBELT2i
550D or
shot with 1D Mk IV 5D Mk II
REBELT1i
500D , it is generated together with the movie file.
 When you play on the camera a movie that was shot with
1D Mk IV 5D Mk II
7D
REBELT2i
550D or REBELT1i
500D , both the movie file and the thumbnail file are required.
DCIM xxxEOS1D
or
xxxCANON
When Adobe RGB is specified, the file names of images shot with
your camera have an underscore “_” as the first character.
1 Display the folder in which the software is saved.
 Open the [Canon Utilities] folder.
C
Y
P
O
2 Drag the [EOS Utility] folder to the Trash.
the [Finder] menu on the desktop  [Empty
3 Select
Trash].
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
 EU is uninstalled.
4 Restart your computer.
You cannot retrieve data that you have emptied into the Trash and
deleted, so be particularly careful when deleting data.
83
Fixing the Plug to the Camera
1D X
1D Mk IV
1Ds Mk III
Cable protector attached.
1D Mk III
Fasten the plug to the camera with the cable protector to prevent it from
detaching during remote shooting.
Introduction
Contents at
a Glance
1D X
1
3 Remove the cable protector in the order (1), (2).
(1)
 Check the direction of the <
in.
> mark on the plug and push it
2 Attach the cable protector in the order (1), (2).
1
2
3
4
Downloading
Images
Open the cover, and connect the small plug of the
cable to the camera’s <A/V OUT / DIGITAL> terminal.
C
Y
P
O
(2)
Camera
Settings
Remote
Shooting
Preferences
Reference
(2)
(1)
Index
Cable protector
84
1D Mk IV
1
3
Open the covers.
With the plug as it is in step 2, connect it to the
camera’s <A/V OUT / DIGITAL> terminal.
<A/V OUT / DIGITAL>
terminal
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
2
Pass the small plug of the cable through the cable
protector, and pull it in the direction of the arrow.
<
4 Fix the cable protector with the fixing screw.
> mark
C
Y
P
O
Remote
Shooting
Preferences
Reference
Cable protector
Index
 Check the direction of the <
> mark on the plug and pull it in.
85
1Ds Mk III
1
1D Mk III
4
Remove the cap.
Attach the cable protector and fix it with the fixing
screw.
Introduction
Contents at
a Glance
Cable protector
1
2
3
4
Downloading
Images
Camera
Settings
2 Attach the cap on the fixing screw.
the small plug of the cable into the <
3 Connect
terminal on your camera.
>
C
Y
P
O
Remote
Shooting
Preferences
Reference
Index
 Connect the plug with the <
camera.
> mark facing the front of the
86
List of Main Window Functions
Introduction
Accessories tab sheet
Control camera tab sheet
Contents at
a Glance
(p.82)
(p.6)
(p.7, p.88)
Camera
Settings
(p.27, p.91)
(p.81)
(p.74)
Quits EU (p.10)
 The window below appears when REBELT4i
is connected.
650D
REBELT3i
600D
1
2
3
4
Downloading
Images
C
Y
P
O
Remote
Shooting
Preferences
Reference
Index
(p.70)
87
List of Viewer Window Functions
(p.7)
Introduction
Images already transferred to computer icon
Movie icon
Switches the recording media
Bracketing icon
Selects the condition of the image
Video Snapshot album
icon
Recording media
folder hierarchy
Recording time
Rating icon*
RAW image icon
RAW + JPEG
image icon
C
Y
P
O
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Protect icon
Audio recording icon
Preferences
Reference
Image display size
Index
Quits EU
Displays the
capture window
Displays the quick preview window
Deletes the image
Check mark (p.8)
Downloads the images to the computer
7D
* Ratings set on 1D X 5D Mk III
(firmware version 2.0.0 or
later) 60D
REBELT4i 650D REBELT3i 600D
REBELT3 1100D ,
Digital Photo Professional Ver. 3.9 or later is displayed. However, the
[Reject] rating is not displayed. Also, ratings cannot be set in EU.
Displays the main window
Displays the [Preferences] window
88
List of Register Data Window Functions for Lens Aberration and Peripheral Illumination Correction (p.22)
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Displays all the categories
Lens category
Camera
Settings
C
Remote
Shooting
Y
P
O
Preferences
Reference
Index
Displays only the
registered lenses
Displays lenses selected in [Select a lens category] by category
No. of lenses registered in the camera/No. of lenses that can be registered
Lens names displayed in the [Register lens aberration correction data] window/
[Register peripheral illumination correction data] window may be partially
shortened depending on the lens type.
89
List of My Menu Settings Window Functions
(p.24)
Introduction
Switches My Menu position
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
My Menu (up to 6 items)
All items that can be
applied to My Menu
C
Y
P
O
Adds to My Menu
Applies My Menu to the camera
Remote
Shooting
Preferences
Reference
Closes [My Menu settings] window
Index
Deletes from My Menu
90
List of Capture Window Functions
Introduction
 Displayed items differ depending on the model and settings of the camera connected.
 For *1 to *11 explanations, see the next page.
Contents at
a Glance
Flash ready*2
AF mode
Mirror lockup
Drive mode
Bracketing*10
Power status*1
Number of possible shots
Warning lamp*3
Rotates shot images*4
Shoot button*5 (p.32)
AF/MF selector button*6
Save destination for shot images
Shooting mode*11
Shutter speed
Aperture*7
Color temperature
White balance
ISO speed
Image recording quality
Save destinations for shot images*8
Metering mode
Exposure Level/AEB Level
(See next page for details)
Displays the [Shooting menu] (p.15)
C
Y
P
O
Displays [Flash control menu] (p.93)
Displays the [Timer shooting settings] window
(p.64, p.65)
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Displays the [My Menu] (p.25)
Displays the [Set-up menu] (p.13)
Index
Displays the [Remote Live View window (Movie)]*9
(p.56, p.58, p.60)
Displays the [Remote Live View window]
(p.31, p.95)
Displays the [Preferences] window (p.74)
Displays the main window (p.87)
Displays the viewer window (p.8, p.88)
Shows/hides the [Quick Preview] window
Displays the [Test Shooting] window (p.41, p.98)
91
*1
2
*
When using the battery, the charge level is displayed.
7D
Displayed only on 1D X 1D Mk IV 5D Mk III
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D
Exposure Level/AEB Level
60D
REBELT3
 The display changes as follows by double-clicking the Exposure level/
AEB level item.
1100D .
*3
*4
*5
*6
Exposure level adjustment
Appears after flash charging is complete and the cursor is moved to
the Shoot button.
Turns on red when shooting was unsuccessful or is impossible. Also
blinks during countdown for self-timer shooting.
Each time you click the button, the shot image rotates 90 degrees.
To make this function available, checkmark [Rotate image] in
preferences ([Remote Shooting] window) (p.76).
7D
60D
50D
On 1D X 1D Mk IV 5D Mk III 5D Mk II
REBELT4i
650D
500D
REBELT3
REBELT3i
600D
REBELT2i
550D
Introduction
Darkest exposure
Brightest exposure
1 level darker
1 level brighter
REBELT1i
[AF], AF/AE is performed when the cursor is moved to the Shoot
button.
7D
Displayed only on 1D X 1D Mk IV 5D Mk III 5D Mk II
50D
REBELT4i
650D
550D
REBELT1i
500D
REBELT3
REBELT3i
600D
REBELT2i
1100D . Even when it is set to
[MF], “AF” appears in the shooting information for the shot image.
Setting < A-DEP > as the camera’s shooting mode disables this
button.
7
* Click the aperture while holding down the <control> key, and you can
decrease the aperture by pressing <O> on the keyboard, or increase
the aperture by pressing <C>.
*8 You can select whether the shot images are saved only to the
computer or both to the computer and to the memory card in the
camera. In movie mode, shot movies are saved only to the camera’s
memory card.
7D
60D
REBELT4i 650D
*9 Displayed only on 5D Mk III
REBELT3i 600D
REBELT2i
550D
REBELT3 1100D .
10
* During HDR (High Dynamic Range) shooting on 5D Mk III , the icon
is displayed as [
]. REBELT4i 650D When [Multi Shot Noise
Reduction] is set, the icon is displayed as [
].
11
1D X
5D Mk III You can also set custom shooting mode C1, C2,
*
and C3.
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
1100D , when the AF/MF selector button is set to
60D
Contents at
a Glance
Y
P
O
Narrow setting
range 1 level
C
Widen setting
range 1 level
Setting width 0
AEB level setting
Maximum setting range
1D X
1D Mk IV
5D Mk III
When the AEB bracketing setting
exceeds the displayable range, [ ], [ ]
marks are displayed to show there are
bracketing indicators beyond the scale.
Preferences
Reference
Index
 Display appears as follows if [2 shots] is set for AEB shooting on
1D X 5D Mk III .
92
List of Flash Function Settings Window Functions
1D X
1D Mk IV 5D Mk III
5D Mk II
7D
60D
REBELT4i
MULTI flash count
650D
REBELT3i
600D
REBELT2i
1st curtain sync/
550D
(p.66)
REBELT3
2nd curtain sync/
1100D *1
Hi-speed sync
Settings update button
Zoom/focal length
Flash mode
MULTI flash frequency
Flash metering
Flash exposure compensation amount/
Flash output level*2
Channel
Master flash ON/OFF
Flash exposure compensation amount/
Flash output level*2 during wireless setting
C
Y
P
O
Wireless function button
Flash ratio
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
[Modeling flash] button
Index
[Save] button
[Load] button
*1 The window displayed differs depending on the connected camera and flash.
*2 Displayed information differs depending on the settings. For more details on settings,
also refer to the Instruction Manual provided with your EX-series Speedlite or
camera.
93
Introduction
Zoom/focal length
MULTI flash frequency
Contents at
a Glance
MULTI flash count
Flash metering
Settings update button
Flash exposure
compensation amount /
Flash output level*2
Flash mode
Syncro setting*1
Channel
Master flash ON/OFF
Flash exposure compensation
amount / Flash output level
during wireless setting*2
C
Y
P
O
Wireless function button
Wireless radio ID
Flash ratio
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
[Modeling flash] button
[Save] button
[Load] button
*1
1st curtain sync/
2nd curtain sync/
Hi-speed sync
*2 Displayed information differs depending on the settings. For more details on settings,
also refer to the Instruction Manual provided with your EX-series Speedlite or camera.
94
List of Remote Live View Window (Live View Tab) Functions
Sets the color temperature
Enlargement display frame
(p.27)
Introduction
Controllers 1
Contents at
a Glance
Selects the white balance
(p.41)
Click white balance
Displays the [Test
Shooting] window (p.98)
AF mode (p.36 to p.40)
Lens drive (p.36)
AF point
Movie recording time
Movie recording in
progress icon
1D X
C
5D Mk III
Movie compression
format
Frame rate
Movie recording size
Starts/stops movie
recording
Displays the capture
window (p.91)
1D X
Checks the depth of field
(p.40)
Shows/hides the controllers 1
Y
P
O
1D X
5D Mk III
REBELT4i
650D
Recording level settings
(p.45)
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Controllers 2
Index
Closes the window
5D Mk III
1D X
5D Mk III
Show/hide electronic Auto rotation button*1
level (p.43)
Shows/hides the AF points
Rotates the image*2
*1 When automatic rotation is set, the [Remote Live View window] display
also rotates automatically to match the camera’s rotation when it is
detected that the camera is held vertically.
Displays the [Zoom View] window (p.35, p.97)
Shows/hides the histogram
Sets the aspect ratio (p.44)
*2 When [
] is set to ON, the [
to rotate images.
][
] buttons cannot be used
95
List of Remote Live View Window (Compose Tab) Functions (p.47)
Overlay image filename
Introduction
Overlay image controllers
Contents at
a Glance
Opens an overlay image (p.47)
Overlay image move and display (p.50)
Enlarge/reduce slider (p.48)
Rotate slider (p.49)
Composite ratio slider (p.49)
Resets the overlay image (p.48) to (p.50)
C
Y
P
O
Grid display (p.51) to (p.52)
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
96
List of Zoom View Window Functions
Moves the display position
(p.35)
Sets the color temperature
Introduction
Controllers 1
Selects the white balance
(p.41)
Click white balance
Displays the [Test
Shooting] window (p.98)
AF mode (p.36 to p.40)
Moves the display
position
C
Y
P
O
Moves the display
position
Lens drive (p.36)
Checks the depth of field
(p.40)
Display mode*
Maintains display of the
[Zoom View] window
Shows/hides the controllers 1
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Moves the display position
Reference
Index
Controllers 2
Closes the window
Displays the capture window (p.91)
AF point show/hide
Returns to the [Remote Live View window]
Rotates the image
* Clicking the [
] button switches to a quality suited to focusing while
viewing on your camera’s LCD monitor; clicking the [
] button
switches to a quality suited to focusing while viewing on your computer.
97
List of Test Shooting Window Functions
(p.41)
Introduction
Test shooting button
Displays the [Click white
balance] window (p.42)
Saves the test shot image
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
C
Remote
Shooting
Y
P
O
Preferences
Reference
Enlargement ratio of the
image
Displays the capture window
Index
Closes the window
RGB values
Coordinates
Rotates the image
100% (actual pixel size) view
Enlargement/reduction of the image
Fit-to-window view
98
Index
A
Adjusting the Horizontal Alignment of the Camera
(Remote Live View Shooting) .............................................................
Adjusting the Vertical Alignment of the Camera
(Remote Live View Shooting) .............................................................
Adjusting the White Balance ...............................................................
Applying Personal White Balance.......................................................
Applying Picture Style Files ................................................................
Attaching the Cable Protector .............................................................
43
43
22
20
18
86
B
Basic Settings (Preferences) .............................................................. 74
Bulb Exposures................................................................................... 65
C
Capture Window ................................................................................. 91
Flash Control Menu ...................................................................... 67
My Menu....................................................................................... 25
Set-up Menu................................................................................. 13
Shooting Menu ............................................................................. 15
Changing the Aspect Ratio (Remote Live View Shooting).................. 44
Changing the White Balance in the Remote Live View Window
(Remote Live View Shooting) ............................................................. 41
Checking the Depth of Field and Exposure
(Remote Live View Shooting) ............................................................. 40
Connecting the Camera to Your Computer........................................... 5
D
Destination Folder Settings (Preferences) .......................................... 74
Download Images Settings (Preferences) .......................................... 75
Downloading All the Images in a Single Operation............................... 6
Downloading Images with a Card Reader .......................................... 10
Downloading Selected Images ............................................................. 7
F
File Name Settings (Preferences)....................................................... 75
Flash Control Menu (Capture Window)............................................... 67
Flash function settings Window .................................................... 68, 93
Flash shooting ..................................................................................... 66
Focusing Automatically (Using AF) (Remote Live View Shooting)...... 36
Focusing in Face Detection Live Mode (Remote Live View Shooting) 39
Focusing in Live Mode (Remote Live View Shooting) ......................... 38
Focusing in Quick Mode (Remote Live View Shooting) ...................... 36
Focusing Manually (Remote Live View Shooting) ............................... 35
Focusing Using AF .............................................................................. 36
Folder Structure and File Names......................................................... 83
Folder Structure and File Names in the Memory Card ........................ 83
Function for Use with WFT-E2, WFT-E2 II, WFT-E3, WFT-E4,
WFT-E4 II, WFT-E5, WFT-E6, or WFT-E7.......................................... 81
I
Interval Timer Shooting ....................................................................... 64
L
Y
P
O
Linked Software Settings (Preferences) .............................................. 77
M
C
Main Window ....................................................................................... 87
My Menu (Capture Window)................................................................ 25
My Menu Settings................................................................................ 24
My Menu Settings Window ............................................................ 25, 90
Introduction
Contents at
a Glance
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
O
Overlaid Display Function (Remote Live View Shooting) .................... 47
Index
Q
Quitting the EOS Utility........................................................................ 10
R
Register Lens Aberration Correction Data/Register Peripheral
Illumination Correction Data Window ............................................ 23, 89
Registering Background Music to a Camera Memory Card ................ 70
Registering Lens Aberration Correction/Peripheral Illumination
Correction Data for the Lens ............................................................... 22
Remote Live View Shooting ................................................................ 27
Remote Live View Window............................................................ 31, 95
99
Remote Live View Window Functions.................................................
Adjusting the Horizontal Alignment of the Camera.......................
Adjusting the Vertical Alignment of the Camera...........................
Changing the Aspect Ratio...........................................................
Changing the White Balance in the Remote Live View Window ..
Checking the Depth of Field and Exposure..................................
Focusing Automatically (Using AF) ..............................................
Focusing in Face Detection Live Mode ........................................
Focusing in Live Mode .................................................................
Focusing in Quick Mode...............................................................
Focusing Manually .......................................................................
Overlaid Display Function ............................................................
White Balance for Flash Photography ..........................................
Remote Shooting Settings (Preferences) ...........................................
35
43
43
44
41
40
36
39
38
36
35
47
41
76
S
Setting JPEG Quality .......................................................................... 21
Setting Picture Styles.......................................................................... 16
Setting the Camera Owner’s Name .................................................... 12
Setting the Camera’s Date and Time.................................................. 12
Setting the Copyright Notice for the Image ......................................... 12
Set-up Menu (Capture Window) ......................................................... 13
Shooting by Operating the Camera .................................................... 52
Shooting Menu (Capture Window)...................................................... 15
Shooting Movies ................................................................................. 53
Specifying Preferences ....................................................................... 74
Basic Settings............................................................................... 74
Destination Folder Settings .......................................................... 74
Download Images Settings........................................................... 75
File Name Settings ....................................................................... 75
Linked Software Settings.............................................................. 77
Remote Shooting Settings............................................................ 76
Time Settings ............................................................................... 77
Starting up EOS Utility .......................................................................... 6
Supported Camera................................................................................ 2
System Requirements........................................................................... 2
Introduction
T
Test Shooting Window................................................................... 41, 98
Time Settings (Preferences)................................................................ 77
Timer Shooting .................................................................................... 64
Contents at
a Glance
U
Uninstalling the Software..................................................................... 83
V
Viewer Window................................................................................ 8, 88
W
White Balance for Flash Photography (Remote Live View Shooting) . 41
Z
Zoom View Window....................................................................... 35, 97
Y
P
O
About This Instruction Manual
C
 It is prohibited to reproduce, in whole or part, the contents of this
Instruction Manual without permission.
 Canon may change without notice the software specifications and
contents of this Instruction Manual.
 The software screens and displays printed in this Instruction Manual
may differ slightly from the actual software.
 The content of this Instruction Manual has been reviewed thoroughly.
However, if you should notice any errors or omissions, please contact
a Canon Service Center.
 Please note that irrespective of the above-mentioned, Canon does
not take responsibility for the outcome of the operation of the
software.
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
Trademark Acknowledgments
 Macintosh is trademark of Apple Inc., registered in the United States
and other countries.
 Other names and products not mentioned above may be registered
trademarks or trademarks of their respective companies.
100