Canon 2157B002 Printer User Manual

Lar g e F o r m a t P r i n t e r
User Manual
ENG
Contents
Contents
Introduction
1
How to use this manual.....................................................................................1
About This User Manual...............................................................................................................1
Viewing Videos of Explanations...................................................................................................3
HTML Version of the Manual for Printing......................................................................................4
Printer Parts
8
Printer parts.......................................................................................................8
Front.............................................................................................................................................8
Back...........................................................................................................................................10
Top Cover (Inside)...................................................................................................................... 11
Tray Feed Area...........................................................................................................................12
Roll Paper Unit Cover (Inside)....................................................................................................13
Carriage......................................................................................................................................14
Ink Tank Cover (Inside)...............................................................................................................15
Control Panel..............................................................................................................................16
Vents..........................................................................................................................................18
Cassette.....................................................................................................................................19
Control Panel...................................................................................................20
Turning the Printer On and Off...................................................................................................20
Printer Modes.............................................................................................................................23
Switching Modes........................................................................................................................27
Printer Menu Operations............................................................................................................29
Main Menu Operations...............................................................................................................30
Menu Structure...........................................................................................................................32
Main Menu Settings....................................................................................................................47
Main Menu Settings (During Printing)........................................................................................58
Submenu Display.......................................................................................................................60
Status Print.................................................................................................................................62
Optional accessories.......................................................................................69
Stand..........................................................................................................................................69
Roll Holder Set...........................................................................................................................70
Desktop Stacker.........................................................................................................................71
IEEE 1394 Expansion Board......................................................................................................71
Printer Specifications.......................................................................................72
Specifications.............................................................................................................................72
Basic Environmental Performance.............................................................................................77
Print Area....................................................................................................................................78
Contents �
Contents
Basic Printing Workflow
80
Printing procedure...........................................................................................80
Loading and Printing on Sheets in the Cassette........................................................................80
Loading and Printing on Rolls....................................................................................................82
Loading and Printing on Sheets in the Paper Feed Slot............................................................86
Printing Options Using Rolls and Sheets...................................................................................88
Printing from Windows...............................................................................................................89
Printing from Mac OS X..............................................................................................................90
Printing from Mac OS 9..............................................................................................................92
Specifying Paper in the Printer Driver (Windows)......................................................................94
Specifying Paper in the Printer Driver (Mac OS X)....................................................................96
Specifying Paper in the Printer Driver (Mac OS 9).....................................................................98
Canceling print jobs.......................................................................................100
Canceling Print Jobs from the Control Panel...........................................................................100
Canceling Print Jobs from Windows.........................................................................................101
Canceling Print Jobs from Mac OS X.......................................................................................102
Canceling Print Jobs from Mac OS 9.......................................................................................104
Handling Paper
106
Paper.............................................................................................................106
Paper........................................................................................................................................106
Types of Paper.........................................................................................................................107
Paper Sizes.............................................................................................................................. 112
Handling rolls................................................................................................. 114
Selecting the Roll as the Paper Source.................................................................................... 114
Loading Rolls on the Roll Paper Holder................................................................................... 115
Removing Rolls From the Roll Holder...................................................................................... 117
Loading Rolls in the Roll Feed Unit.......................................................................................... 118
Removing Roll from the Roll Feed Unit....................................................................................122
Selecting the Paper Type (Roll)................................................................................................124
Specifying the Paper Length (Roll)...........................................................................................125
Feeding Roll Paper Manually...................................................................................................126
Detection of the Remaining Roll Paper....................................................................................127
Cutting the Leading Edge of Roll Paper Automatically.............................................................128
Specifying the Cutting Method for Rolls...................................................................................130
Reducing Dust from Cutting Rolls............................................................................................134
Specifying the Ink Drying Time for Rolls...................................................................................135
Clearing Jammed Roll Paper...................................................................................................138
Clearing Jammed Paper (Paper Feed Slot).............................................................................142
Roll Holder Set.........................................................................................................................143
Attaching Accessories to the Roll Holder.................................................................................144
Feeding Paper from the Roll Feed Unit....................................................................................146
Removing the Roll Feed Unit...................................................................................................147
Installing the Roll Feed Unit.....................................................................................................148
Accessing the Printer Driver Dialog Box from the Operating System Menu (Windows)..........149
Media Detailed Settings Dialog Box (Windows).......................................................................151
Media Detailed Settings Dialog Box (Mac OS X).....................................................................152
ii Contents
Contents
Media Detailed Settings Dialog Box (Mac OS 9)......................................................................153
Handling sheets.............................................................................................154
Selecting the Cassette as the Paper Source............................................................................154
Selecting the Tray as the Paper Source...................................................................................155
Loading Sheets in the Cassette...............................................................................................156
Loading Sheets Manually.........................................................................................................159
Selecting the Paper Type (Cassette)........................................................................................167
Selecting the Paper Type (Tray)...............................................................................................168
Selecting the Paper Size (Cassette)........................................................................................170
Removing Paper from the Cassette.........................................................................................171
Removing Sheets from the Top Paper Feed Slot.....................................................................172
Clearing Jammed Paper from the Cassette.............................................................................173
Clearing Jammed Paper from the Tray....................................................................................179
Handling sheets for paper feed slots.............................................................182
Selecting the Tray as the Paper Source...................................................................................182
Loading Sheets Manually.........................................................................................................183
Selecting the Paper Type (Tray)...............................................................................................191
Selecting the Paper Size (Tray)................................................................................................193
Removing Sheets from the Top Paper Feed Slot.....................................................................195
Removing Heavyweight Paper from the Front Paper Feed Slot..............................................196
Clearing Jammed Paper from the Tray....................................................................................197
Output Stacker...............................................................................................200
Desktop Stacker.......................................................................................................................200
Using the Output Stacker.........................................................................................................201
Enhanced Printing Options
202
Print quality and color settings.......................................................................202
Choosing a Paper for Printing..................................................................................................202
Giving Priority to Particular Graphic Elements and Colors for Printing....................................203
Printing Photos and Images (Windows, Mac OS X).................................................................207
Printing Photos and Images (Mac OS 9)..................................................................................209
Printing Line Drawings and Text (Windows, Mac OS X).......................................................... 211
Printing Line Drawings and Text (Mac OS 9)...........................................................................212
Printing Office Documents........................................................................................................213
Adjusting the Color in the Printer Driver...................................................................................214
Printing in Ideal Colors for Light in the Viewing Environment...................................................218
Printing Photos in Monochrome...............................................................................................219
Choosing the Document Type and Printing Conditions (Windows)..........................................220
Choosing the Document Type and Printing Conditions (Mac OS X)........................................222
Choosing the Document Type and Printing Conditions (Mac OS 9)........................................225
Fine-Tuning Colors of Photos and Images (Windows).............................................................228
Fine-Tuning Colors of Photos and Images (Mac OS X)...........................................................231
Fine-Tuning Colors of Photos and Images (Mac OS 9)............................................................234
Fine-Tuning Monochrome Settings When Printing Photos (Windows).....................................237
Fine-Tuning Monochrome Settings When Printing Photos (Mac OS X)...................................239
Fine-Tuning Monochrome Settings When Printing Photos (Mac OS 9)...................................242
Printing Line Drawings and Text (Windows).............................................................................245
Printing Line Drawings and Text (Mac OS X)...........................................................................247
Contents iii
Contents
Printing Line Drawings and Text (Mac OS 9)...........................................................................249
Printing Office Documents (Windows)......................................................................................251
Printing Office Documents (Mac OS X)....................................................................................253
Printing Office Documents (Mac OS 9)....................................................................................255
Printing Photos and Images (Windows)...................................................................................257
Printing Photos and Images (Mac OS X).................................................................................259
Printing Photos and Images (Mac OS 9)..................................................................................262
Printing Photos in Monochrome (Windows).............................................................................265
Printing Photos in Monochrome (Mac OS X)...........................................................................267
Printing Photos in Monochrome (Mac OS 9)............................................................................270
Printing enlargements or reductions..............................................................273
Resizing Originals to Match the Paper Size.............................................................................273
Resizing Originals to Fit the Roll Width....................................................................................274
Resizing Originals by Entering a Scaling Value.......................................................................275
Printing Enlargements of Scanned Originals from a Color imageRUNNER.............................276
Printing Enlargements of Scanned Originals from a Color imageRUNNER (Windows)...........277
Printing Enlargements of Scanned Originals from a Color imageRUNNER (Mac OS X).........279
Resizing Originals by Entering a Scaling Value (Windows).....................................................281
Resizing Originals by Entering a Scaling Value (Mac OS X)....................................................283
Resizing Originals by Entering a Scaling Value (Mac OS 9)....................................................286
Resizing Originals to Fit the Roll Width (Windows)..................................................................290
Resizing Originals to Fit the Roll Width (Mac OS X)................................................................292
Resizing Originals to Fit the Roll Width (Mac OS 9).................................................................295
Resizing Originals to Match the Paper Size (Windows)...........................................................298
Resizing Originals to Match the Paper Size (Mac OS X).........................................................300
Resizing Originals to Match the Paper Size (Mac OS 9)..........................................................302
Printing at full size..........................................................................................305
Printing on Oversized Paper....................................................................................................305
Borderless Printing at Actual Size............................................................................................307
Borderless Printing at Actual Size (Windows)..........................................................................309
Borderless Printing at Actual Size (Mac OS X)........................................................................ 311
Borderless Printing at Actual Size (Mac OS 9).........................................................................314
Printing at Full Size (Windows)................................................................................................318
Printing at Full Size (Mac OS X)...............................................................................................320
Printing at Full Size (Mac OS 9)...............................................................................................323
Borderless Printing........................................................................................325
Borderless Printing on Paper of Equivalent Size......................................................................325
Borderless Printing by Resizing Originals to Fit the Roll Width................................................327
Borderless Printing at Actual Size............................................................................................329
Borderless Printing at Actual Size (Windows)..........................................................................331
Borderless Printing at Actual Size (Mac OS X)........................................................................333
Borderless Printing at Actual Size (Mac OS 9).........................................................................336
Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)..............................340
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)............................342
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS 9)............................345
Borderless Printing by Resizing Originals to Match the Paper Size (Windows).......................349
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X).....................351
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS 9).....................354
iv Contents
Contents
Printing banners or at other non-standard sizes............................................358
Printing Vertical or Horizontal Banners (Large-Format Printing)..............................................358
Printing on Non-Standard Paper Sizes....................................................................................359
Printing on Non-Standard Paper Sizes (Windows)..................................................................360
Printing on Non-Standard Paper Sizes (Mac OS X).................................................................364
Printing on Non-Standard Paper Sizes (Mac OS 9).................................................................366
Printing Vertical or Horizontal Banners (Large-Format Printing; Windows)..............................369
Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X)............................373
Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS 9)............................376
Tiling and multiple pages per sheet...............................................................380
Printing Multiple Originals Next to Each Other.........................................................................380
Printing Multiple Pages Continuously.......................................................................................382
Printing Multiple Pages Per Sheet............................................................................................383
Printing Posters in Sections.....................................................................................................384
Printing Large Posters (Windows)............................................................................................385
Printing Large Posters (Mac OS 9)..........................................................................................387
Printing Multiple Originals Next to Each Other (Windows).......................................................389
Printing Multiple Originals Next to Each Other (Mac OS X).....................................................391
Printing Multiple Pages Continuously (Windows).....................................................................393
Printing Multiple Pages Continuously (Mac OS X)...................................................................394
Printing Multiple Pages Continuously (Mac OS 9)...................................................................396
Printing Multiple Pages Per Sheet (Windows)..........................................................................398
Printing Multiple Pages Per Sheet (Mac OS X)........................................................................400
Printing Multiple Pages Per Sheet (Mac OS 9)........................................................................403
Centering originals.........................................................................................405
Printing Originals Centered on Rolls........................................................................................405
Printing Originals Centered on Sheets.....................................................................................406
Printing Originals Centered on Rolls (Windows)......................................................................407
Printing Originals Centered on Rolls (Mac OS X)....................................................................409
Printing Originals Centered on Rolls (Mac OS 9).....................................................................412
Printing Originals Centered on Sheets (Windows)...................................................................415
Printing Originals Centered on Sheets (Mac OS X).................................................................417
Printing Originals Centered on Sheets (Mac OS 9)..................................................................419
Conserving roll paper.....................................................................................422
Conserving Roll Paper by Rotating Originals 90 Degrees.......................................................422
Conserving Roll Paper by Printing Originals Without Top and Bottom Margins.......................423
Conserving Roll Paper by Printing Originals Without Top and Bottom Margins (Windows).....424
Conserving Roll Paper by Printing Originals Without Top and Bottom Margins (Mac OS X)...426
Conserving Roll Paper by Printing Originals Without Top and Bottom Margins (Mac OS 9)....429
Conserving Roll Paper by Rotating Originals 90 Degrees (Windows).....................................431
Conserving Roll Paper by Rotating Originals 90 Degrees (Mac OS X)....................................433
Conserving Roll Paper by Rotating Originals 90 Degrees (Mac OS 9)....................................436
Printing CAD Drawings..................................................................................438
Printing CAD Drawings.............................................................................................................438
Printing Line Drawings and Text (Windows).............................................................................439
Printing Line Drawings and Text (Mac OS X)...........................................................................441
Printing Line Drawings and Text (Mac OS 9)...........................................................................443
Contents Contents
Other useful settings......................................................................................445
Printing With Watermarks.........................................................................................................445
Making the Original Orientation Match the Paper Orientation..................................................446
Using Favorites........................................................................................................................447
Cutting Roll Paper After Printing...............................................................................................447
Printing from Photoshop...........................................................................................................448
Using PosterArtist to Compose Originals.................................................................................449
Cutting Roll Paper After Printing (Windows).............................................................................450
Cutting Roll Paper After Printing (Mac OS X)...........................................................................451
Cutting Roll Paper After Printing (Mac OS 9)...........................................................................453
Making the Original Orientation Match the Paper Orientation (Windows)................................455
Making the Original Orientation Match the Paper Orientation (Mac OS X)..............................457
Making the Original Orientation Match the Paper Orientation (Mac OS 9)..............................459
Printing with Watermarks-COPY, FILE COPY, and so on (Windows)......................................461
Printing with Watermarks-COPY, FILE COPY, and so on (Mac OS 9).....................................463
Software
465
Windows........................................................................................................465
Printer Driver Settings (Windows)............................................................................................465
Confirming Print Settings (Windows)........................................................................................467
Previewing Images Before Printing (Windows)........................................................................469
Paper Information on Printer Dialog Box (Windows)................................................................470
Settings Summaries Dialog Box (Windows).............................................................................471
Using Favorites (Windows)......................................................................................................472
Main Sheet (Windows).............................................................................................................474
Page Setup Sheet (Windows)..................................................................................................478
Layout Sheet (Windows)..........................................................................................................480
Gray Adjustment Sheet (Windows)..........................................................................................482
Favorites Sheet (Windows)......................................................................................................483
Utility Sheet (Windows)............................................................................................................484
Support Sheet (Windows)........................................................................................................485
Device Settings Sheet (Windows)............................................................................................486
Using PosterArtist to Compose Originals (Windows)...............................................................487
Printing Adobe RGB Images (Windows)..................................................................................489
imagePROGRAF Status Monitor (Windows)............................................................................492
imagePROGRAF Device Setup Utility......................................................................................493
Installing imagePROGRAF Device Setup Utility......................................................................494
Configuring the IP Address Using imagePROGRAF Device Setup Utility................................495
Digital Photo Front-Access.......................................................................................................496
Accessing the Printer Driver Dialog Box from Applications (Windows)....................................497
Accessing the Printer Driver Dialog Box from the Operating System Menu (Windows)..........499
Color Settings Sheet: Color (Windows)....................................................................................501
Color Settings Sheet: Monochrome (Windows).......................................................................507
Confirming the Print Image Before Printing..............................................................................509
Media Detailed Settings Dialog Box (Windows).......................................................................510
Media Size Options Dialog Box (Windows).............................................................................. 511
Printing Enlargements of Scanned Originals from a Color imageRUNNER (Windows)...........512
Special Settings Dialog Box (Windows)...................................................................................514
View Settings Dialog Box for the Printing Application (Windows)............................................515
vi Contents
Contents
Mac OS X......................................................................................................516
Printer Driver Settings (Mac OS X)..........................................................................................516
Confirming Print Settings (Mac OS X)......................................................................................517
Checking the Layout Before Printing........................................................................................519
Checking the Layout Before Printing (Mac OS X)....................................................................520
Previewing Images Before Printing (Mac OS X)......................................................................521
Paper Information on Printer Dialog Box (Mac OS X)..............................................................522
Main Pane (Mac OS X)............................................................................................................523
Page Setup Pane (Mac OS X).................................................................................................525
Utility Pane (Mac OS X)...........................................................................................................527
Gray Adjustment Pane (Mac OS X)..........................................................................................528
Additional Settings Pane (Mac OS X)......................................................................................529
Support Pane (Mac OS X)........................................................................................................530
Using Favorites (Mac OS X).....................................................................................................530
Printing Adobe RGB Images (Mac OS X).................................................................................531
imagePROGRAF Printmonitor (Macintosh)..............................................................................534
Accessing the Printer Driver Dialog Box from Applications (Mac OS X)..................................535
Color Settings Pane: Color (Mac OS X)...................................................................................536
Color Settings Pane: Monochrome (Mac OS X).......................................................................538
Media Detailed Settings Dialog Box (Mac OS X).....................................................................539
View Settings Dialog Box for the Printing Application (Mac OS X)...........................................540
Mac OS 9.......................................................................................................541
Printer Driver Settings (Mac OS 9)...........................................................................................541
Confirming Print Settings (Mac OS 9)......................................................................................542
Previewing Images Before Printing (Mac OS 9).......................................................................544
Main Pane (Mac OS 9).............................................................................................................545
Page Setup Pane (Mac OS 9)..................................................................................................547
Finishing Pane (Mac OS 9)......................................................................................................549
Gray Adjustment Pane (Mac OS 9)..........................................................................................550
Device Settings Pane (Mac OS 9)............................................................................................551
Additional Settings Pane (Mac OS 9).......................................................................................552
Using Favorites (Mac OS 9).....................................................................................................553
Printing Adobe RGB Images (Mac OS 9).................................................................................555
imagePROGRAF Printmonitor (Macintosh)..............................................................................558
Accessing the Printer Driver Dialog Box from Applications (Mac OS 9)...................................559
Color Settings Pane: Color (Mac OS 9)...................................................................................561
Color Settings Pane: Monochrome (Mac OS 9).......................................................................564
Media Detailed Settings Dialog Box (Mac OS 9)......................................................................566
Special Settings Dialog Box (Mac OS 9)..................................................................................567
View Settings Dialog Box for the Printing Application (Mac OS 9)...........................................568
Network Setting
569
Network Setting.............................................................................................569
Network Environment...............................................................................................................569
Configuring the IP Address on the Printer................................................................................571
Initializing the Network Settings...............................................................................................572
Configuring the Printer's TCP/IP Network Settings..................................................................573
Configuring the IP Address Using the Printer Control Panel....................................................575
Configuring the IP Address Using ARP and PING Commands................................................577
Contents vii
Contents
Specifying Printer-Related Information.....................................................................................579
Using RemoteUI.......................................................................................................................580
Email Notification When Printing is Finished or Errors Occur..................................................581
Network Setting (Windows)...........................................................................582
Configuring the Printer's NetWare Network Settings................................................................582
Specifying the Printer's Frame Type.........................................................................................584
Specifying NetWare Print Services...........................................................................................587
Specifying NetWare Protocols..................................................................................................590
Configuring NetWare Network Settings....................................................................................592
Configuring the Printer Driver Destination (Windows)..............................................................593
Sharing the Printer in Windows................................................................................................594
Installing imagePROGRAF Device Setup Utility......................................................................596
Configuring the IP Address Using imagePROGRAF Device Setup Utility................................597
Network Setting (Macintosh)..........................................................................598
Configuring the Printer's AppleTalk Network Settings..............................................................598
Configuring the Printer Driver Destination (Macintosh)............................................................599
Configuring the Destination for AppleTalk Network (Macintosh)..............................................600
Configuring the Destination for TCP/IP Network (Macintosh)..................................................604
Configuring the Destination for Bonjour Network (Macintosh).................................................608
Maintenance
610
Adjusting the Printhead..................................................................................610
Correcting Print Misalignment..................................................................................................610
Adjusting the Printhead Alignment Automatically.....................................................................610
Adjusting the Printhead Alignment Manually............................................................................612
Adjusting the Printhead Height.................................................................................................614
Adjusting the feed amount.............................................................................615
Adjusting the Feed Amount Automatically................................................................................615
Adjusting the Feed Amount Manually.......................................................................................619
Adjusting the Vacuum Strength................................................................................................623
Adjusting the Measurement Scale for Better Accuracy............................................................624
Adjusting Color on the Trailing Edge of Sheets........................................................................626
Color adjustment............................................................................................628
Using Color Calibration to Adjust Colors..................................................................................628
Printing in Ideal Colors for Light in the Viewing Environment...................................................631
By selecting color tones on Charts before printing (Windows).................................................632
Printing in Colors Matching the Measured Ambient Light.........................................................636
Accessing the Printer Driver Dialog Box from Applications (Windows)....................................639
Ink Tanks........................................................................................................641
Ink Tank....................................................................................................................................641
Replacing Ink Tanks.................................................................................................................642
Checking Ink Tank Levels.........................................................................................................648
When to Replace Ink Tanks......................................................................................................649
Printheads......................................................................................................650
Printhead..................................................................................................................................650
Checking the Print Quality........................................................................................................650
viii Contents
Contents
Improving the Print Quality.......................................................................................................650
Checking for Nozzle Clogging..................................................................................................651
Cleaning the Printhead.............................................................................................................652
Replacing the Printhead...........................................................................................................653
Maintenance Cartridge..................................................................................661
Maintenance Cartridge.............................................................................................................661
Replacing the Maintenance Cartridge......................................................................................661
Checking the Maintenance Cartridge Capacity........................................................................667
When to Replace the Maintenance Cartridge..........................................................................668
Cleaning the Printer.......................................................................................669
Cleaning the Printer Exterior....................................................................................................669
Cleaning Inside the Top Cover.................................................................................................670
Cleaning the Paper Retainer....................................................................................................673
Cleaning the Pick Up Roller.....................................................................................................674
Cleaning Spurs Used in Paper Feeding...................................................................................675
Cleaning the Printhead.............................................................................................................678
Other Maintenance........................................................................................679
Preparing to Transfer the Printer..............................................................................................679
Updating the Firmware.............................................................................................................685
Troubleshooting
686
Frequently Asked Questions..........................................................................686
Frequently Asked Questions....................................................................................................686
Specifying Paper in the Printer Driver......................................................................................688
Printing does not start....................................................................................689
The Data lamp on the Control Panel does not light up.............................................................689
The Printer Does Not Respond Even if Print Jobs are Sent.....................................................689
The Display Screen indicates the system is filling with ink.......................................................689
Cannot print over a network...........................................................................690
Cannot connect the printer to the network...............................................................................690
Configuring the Communication Mode Manually......................................................................691
Cannot print over a TCP/IP network.........................................................................................693
Cannot print over AppleTalk or Bonjour networks....................................................................694
Cannot print over a NetWare network......................................................................................695
The printer stops during a print job................................................................696
An error message is shown on the Display Screen..................................................................696
The printer ejects blank, unprinted paper.................................................................................696
Problems with the printing quality..................................................................697
Printing is faint..........................................................................................................................697
Paper rubs against the Printhead.............................................................................................698
The edges of the paper are dirty..............................................................................................699
The surface of the paper is dirty...............................................................................................700
The back side of the paper is dirty...........................................................................................700
Banding in different colors occurs............................................................................................700
The contrast becomes uneven during printing.........................................................................700
Contents ix
Contents
Colors in printed images are uneven........................................................................................701
Problems with the printing quality caused by the type of paper...............................................702
Lines are misaligned................................................................................................................702
The length of printed images is inaccurate...............................................................................702
Documents are printed in monochrome...................................................................................702
Printed colors are inaccurate....................................................................................................703
Image Edges are Blurred or White Banding Occurs................................................................704
Documents are printed crooked...............................................................................................704
White dots about 1 mm (0.039 in) apart appear on printed documents, in the direction
paper is fed...............................................................................................................................704
Fine Scratches Appear on Glossy Paper from the Cassette....................................................704
Immediately After Borderless Printing, the Trailing Edge Margin is Soiled During Regular
Printing.....................................................................................................................................705
Roller marks are left across the trailing edge of paper.............................................................705
Line thickness is not uniform (Windows)..................................................................................705
Installation problems......................................................................................706
The IEEE 1394 Driver Cannot Be Installed Correctly...............................................................706
Removing Installed Printer Drivers...........................................................................................707
Clearing jammed paper.................................................................................708
Clearing Jammed Roll Paper...................................................................................................708
Clearing Jammed Paper (Paper Feed Slot).............................................................................712
Clearing Jammed Paper from the Tray....................................................................................713
Clearing Jammed Paper from the Cassette.............................................................................717
If the Printer makes a strange sound.............................................................723
If the Printer Makes a Strange Sound......................................................................................723
Other problems..............................................................................................724
The printer consumes a lot of ink.............................................................................................724
A message to check the Maintenance Cartridge is not cleared after you replace the
Maintenance Cartridge.............................................................................................................724
Paper is not cut straight............................................................................................................724
Paper cannot be cut.................................................................................................................725
Depression on the leading edge is left.....................................................................................725
Roller marks are left across the trailing edge of paper.............................................................725
The printer does not go on.......................................................................................................725
Roll paper cannot be inserted into the Paper Feed Slot...........................................................726
Cannot load sheets in the tray..................................................................................................726
The Front Tray Guides are in the Front Paper Feed Slot. .......................................................726
Ink level detection.....................................................................................................................727
Error Message
729
Responding to Messages..............................................................................729
Responding to Messages.........................................................................................................729
Error Messages........................................................................................................................731
Calibration multi-sensor err......................................................................................................733
Paper loaded askew.................................................................................................................733
Paper Mismatch / Prnt:PressOnline.........................................................................................733
Paper Mismatch / ReplcPap:Press↓.........................................................................................733
Contents
Contents
Paper Too Large / Please Check..............................................................................................734
Paper Too Small / Please Check..............................................................................................734
PaprSiz Mismatch / Prnt:PressOnline......................................................................................734
PaprTyp Mismatch / Prnt:PressOnline.....................................................................................734
Messages regarding paper............................................................................735
Paper Mismatch.......................................................................................................................735
PaprTyp Mismatch....................................................................................................................735
PaprSiz Mismatch....................................................................................................................736
Paper Size / Please Check.......................................................................................................737
Need A4/Letter Vert. or Larger.................................................................................................737
Need 10 in or Larger Roll.........................................................................................................737
Roll Paper / Please Replace....................................................................................................738
Load Papr in Cas / Press Online..............................................................................................739
Cassette Selectd / Press ↑ Key................................................................................................739
Cassette Undetected................................................................................................................739
Media Check / Please Cancel..................................................................................................739
Paper Feed Slot / SpcfdPapr NotFit.........................................................................................739
Sheets Loaded / Press ↓ To Eject............................................................................................740
Tray Selected...........................................................................................................................740
Check Supported Paper...........................................................................................................741
Remove paper..........................................................................................................................742
Roll Paper Chk / Check Width/Spcr.........................................................................................743
Paper Loaded / Crooked..........................................................................................................744
Paper Askew / Please Reload..................................................................................................745
Paper / Please Reload.............................................................................................................746
Papr Size Undetected..............................................................................................................746
Can't DetectPapr......................................................................................................................747
Feed Limit.................................................................................................................................747
Paper Jam / Press ↑ Key..........................................................................................................747
Cutting Error.............................................................................................................................748
Roll P Unit / Please Check.......................................................................................................748
Roll Selected / Load Roll..........................................................................................................749
Messages regarding ink.................................................................................750
Ink Lvl: Chk xx (xx represents an ink color)..............................................................................750
Ink Tank / Check xx (xx represents an ink color)......................................................................750
Not Enough Ink.........................................................................................................................751
No Ink Left................................................................................................................................752
Ink Tank / Replace xx (xx represents an ink color)...................................................................752
Ink Tank Cover / Close Please.................................................................................................753
The remaining level of the following ink cannot be correctly detected.....................................753
Mist Full Soon...........................................................................................................................753
Messages regarding printing or adjusment....................................................754
Paper Type / Please Change...................................................................................................754
Online Key / and recalibrate.....................................................................................................754
Excessv Temp/Hu / Press OK/Stop..........................................................................................755
Press OK and recalibrate.........................................................................................................755
Contents xi
Contents
Messages regarding printheads....................................................................756
Online Key / and recalibrate.....................................................................................................756
Printhead x / Check Nozzles (x is Left or Right).......................................................................756
Printhead / Please Check.........................................................................................................757
Check Printout..........................................................................................................................757
Printhead x / Replace Printhd (x is Left or Right).....................................................................757
Messages regarding the maintenance cartridge . .........................................758
Maint Cartridge / Load Cartridge..............................................................................................758
MTCart Full Soon.....................................................................................................................758
Maint Cartridge / Replace Cart.................................................................................................758
Other Messages............................................................................................759
GARO Wxxxx (x represents a number)....................................................................................759
Top Cover / Please Close.........................................................................................................759
ERROR Exxx-xxxx (x represents a letter or number)...............................................................759
Power On / Again.....................................................................................................................760
Consumables Low....................................................................................................................761
Repl Consumables...................................................................................................................761
Power On / Again / Multi-sensor Err.........................................................................................761
Cannot update firmware...........................................................................................................761
xii Contents
How to use this manual
Introduction
How to use this manual
About This User Manual
• Symbols
The following symbols are used in this User Manual to indicate safety information and explanations
on restrictions or precautions in use.
Important
Indicates important information
that must be followed when using
the printer. Be sure to read this
information to prevent printer
damage or operating errors.
Caution
Indicates caution items for which
operating error poses a risk of
injury or damage to equipment
or property. To ensure safe use,
always follow these precautions.
Note
Indicates helpful reference
information and supplemental
information on particular topics.
• Button names and user interface elements
Key and button names on the control panel and user interface elements in software (such as menus and
buttons) are indicated as follows in this User Manual.
Control Panel Buttons
Example: Press the OK button.
Control Panel Interface Items and Messages
Example: Head Cleaning is displayed.
Software Interface Items
(Menus and Buttons)
Example: Click OK .
Keyboard Keys
Example: Press the Tab key.
• Part Names
Names of printer parts are indicated as follows in this User Manual.
Printer part names
Example: Open the Top Cover .
Introduction 1
How to use this manual
• Cross-reference
Other pages or manuals that provide related information are indicated as follows in this User Manual.
Cross-Reference in the Same User Manual
Example: see “Turning the Printer On and Off”.
(→P.20)
Click the link to jump to the corresponding page.
Cross-Reference in Related Manuals
Example: See the Paper Reference Guide .
Other Cross-Reference
Example: See the printer driver help.
• Figures and software screens
• Figures in this User Manual may be different from the actual appearance of the printer in some
cases.
• Screens depicted in this User Manual for the printer driver or other software may be different from
the actual screens because of subsequent updates.
• Windows XP screens are used in explanations of Windows operations in this User Manual.
• Trademarks
• Canon, the Canon logo, and imagePROGRAF are trademarks or registered trademarks of Canon
Inc.
• Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States
and other countries.
• Macintosh is a registered trademark of Apple Inc. in the United States and other countries.
• Other company and product names are trademarks or registered trademarks of their respective
owners.
• Copyright
© 2007 Canon Inc.
• Unauthorized reproduction of this User Manual in whole or part is prohibited.
• May we request
Thank you for understanding the following points.
• The information in this User Manual is subject to change without notice.
• We strive to ensure accuracy of information in this User Manual, but if you notice errors or
omissions, please contact us.
2 Introduction
How to use this manual
Viewing Videos of Explanations
To view videos related to topic pages, click the View Video button. The video will play in a separate window.
This way, you can learn by watching demonstrations of the actual procedures.
Video Requirements: In Windows, Adobe Flash Player must be installed to view the videos.
If it is not installed, download it by clicking the following URL.
http://www.adobe.com/products/ashplayer/
Note that this URL is subject to change. If you cannot access this URL, download Adobe Flash Player by
visiting the main Adobe website and navigating to the appropriate page.
Introduction 3
How to use this manual
HTML Version of the Manual for Printing
For your convenience when printing this manual, HTML versions of the sections in “Using the Printer” on the
top page are available. All topics in a section are combined in one le for printing. This section describes how
to print sections of the manual, using the content of Printing Procedure in Basic Printing Workow as
an example.
1.
On the top page, click Basic Printing Workow.
2.
Under Basic Printing Workow in the left frame, click Printing Procedure.
4 Introduction
How to use this manual
3.
In the title area of Printing Procedure, click Access to the HTML for printing.
An HTML version of the topics in Printing Procedure is displayed, suitable for printing.
Introduction 5
How to use this manual
4.
Access the printing dialog box as follows, depending on your computer’s operating system.
• Windows
In Windows, right-click anywhere in the explanation area except on a gure or a link. In the shortcut
menu, click Print to display the Print dialog box.
• Macintosh
On a Macintosh computer, click anywhere in the explanation area except on a gure or a link while
holding the Ctrl key. In the shortcut menu, click Print Frame to display the Print dialog box.
6 Introduction
How to use this manual
5.
Specify conditions as needed, and then click Print (Windows) or Print (Macintosh).
• Windows
• Macintosh
Note
• To print “Software” on the top page or individual topics that are displayed, follow steps 4 and 5.
Introduction 7
Printer parts
Printer Parts
Printer parts
Front
Standard
When the Cassette and Output Tray are removed
*1: When the Cassette and Output Tray are removed
a. Top Cover
Open this cover to install the Printhead and remove any jammed paper from inside the printer, as
needed. (→P.11)
b. Paper Tray Cover
Open this cover to load sheets in the Top Paper Feed Slot. (→P.12)
c. Roll Feed Unit
Load rolls in this unit. You can also load sheets in this unit manually.
d. Roll Paper Unit Cover
Open this cover to load rolls. (→P.13)
e. Control Panel
Use this panel to operate the printer and check the printer status. (→P.16)
f. Output Tray
Printed documents are ejected into the output tray.
g. Output Tray ( Front Paper Feed Slot )
All printed documents are ejected from this slot. When loading heavyweight paper, insert it here. (→P.12)
h. Vertical Paper Guides
When printing on rolls, lift the guides and support ejected documents to prevent paper jams. Lifting the
guides when printing from the Front Paper Feed Slot will automatically raise the Front Tray Guides,
making it easier to load paper in the Front Paper Feed Slot.
8 Printer Parts
Printer parts
i. Output Tray Extension
An extension to prevent ejected paper from falling to the oor. Pull out the extension to match the
paper size before printing on sheets.
j. Paper Alignment Line
When loading heavyweight paper, ensure the paper edge is parallel to this line.
k. Cutter Unit
A round-bladed cutter for automatic roll cutting. The cutter is retracted inside when not cutting.
l. Cassette
Load sheets in this tray.
m.Maintenance Cartridge
Absorbs excess ink.
n. Ink Tank Cover
Open this cover to replace Ink Tank. (→P.15)
o. Front Tray Guides
Lifting the Vertical Paper Guides when printing from the Front Paper Feed Slot will automatically raise
the guides, making it easier to load paper in the Front Paper Feed Slot.
Printer Parts 9
Printer parts
Back
a. Expansion Board Slots
For installing an IEEE 1394 (FireWire) expansion board, as desired.
b. USB Port
Connect a USB cable to this port. This port is compatible with USB 2.0 High Speed mode.
c. Ethernet Port
Connect an Ethernet cable to this port.
d. Power Supply Connector
Connect the power cord to this connector.
e. Back Cover
Open this cover to remove any jammed paper when printing from the Cassette, as needed.
f. Carrying handles (Four Positions)
When carrying the printer, hold it by these handles under both sides.
10 Printer Parts
Printer parts
Top Cover (Inside)
a. Carriage
Moves the Printhead. The carriage serves a key role in printing. (→P.14)
b. Carriage Shaft
The Carriage slides along this shaft.
c. Paper Retainer
Important in supplying the paper. This retainer holds paper as it is fed.
d. Platen
The Printhead moves across the platen during printing. The Vacuum holes on the platen holds
paper in place.
e. Borderless Printing Ink Grooves
For catching ink outside the edges of paper during borderless printing.
f. Cleaning Brush
When cleaning inside the printer under the Top Cover, use this brush to sweep away paper dust on
the Platen.
Printer Parts 11
Printer parts
Tray Feed Area
a. Tray
Load sheets manually in this tray.
b. Width Guide
When loading paper, move the guide to match the paper size.
c. Top Paper Feed Slot
When loading sheets, insert them here.
d. Front Paper Feed Slot ( Output Tray )
When loading heavyweight paper, insert it here. All printed documents are ejected from this slot.
12 Printer Parts
Printer parts
Roll Paper Unit Cover (Inside)
a. Roll Holder
Load rolls on this holder.
b. Holder Stopper
Secure rolls on the Roll Holder with this part.
c. Roll Holder Slot
Slide the Roll Holder into this guide slot.
Printer Parts 13
Printer parts
Carriage
a. Printhead Fixer Cover
Holds the Printhead in place.
b. Printhead L
The printhead is equipped with ink nozzles. It serves a key role in printing.
c. Printhead R
The printhead is equipped with ink nozzles. It serves a key role in printing.
d. Printhead Fixer Lever
Locks the Printhead Fixer Cover.
14 Printer Parts
Printer parts
Ink Tank Cover (Inside)
a. Ink Tank
Cartridges of ink in various colors.
b. Ink Tank Lock Lever
A lever that locks the Ink Tank in place and protects it. Lift and press down the lever when replacing
an Ink Tank.
c. Ink Lamp (Red)
Indicates the state of the Ink Tank as follows when the Ink Tank Cover is opened.
• On
The Ink Tank is installed correctly.
• Off
No Ink Tank is installed, or the ink level detection function is disabled.
• Flashing Slowly
Not much ink is left.
• Flashing Rapidly
There is no more ink.
a. Ink Color Label
Load an Ink Tank corresponding to the color and name on these labels.
b. Ink Set
An Ink Tank that can be used in the printer (→P.641) is labeled with a white letter “H” in a black circle
on the side. When purchasing an Ink Tank, make sure an “H” is printed on the label.
Printer Parts 15
Printer parts
Control Panel
a. Data lamp (Green)
• Flashing
During printing, the Data lamp ashes when the printer is receiving or processing print jobs.
Otherwise, this lamp ashes when the printer is paused or updating the rmware.
• Off
There are no active print jobs when the Data lamp is off.
b. Message lamp (Orange)
• On
A warning message is displayed.
• Flashing
An error message is displayed.
• Off
The printer is off or is operating normally.
c. Paper Source Section
After you press the Feeder Selection button, the lamp for your chosen paper source is lit.
1. Auto Feed lamp (Green) ( Cassette or Rolls)
• On
Shows whether a Cassette or roll is selected as the paper source.
• Off
Shows whether the Tray or Front Paper Feed Slot is selected as the paper source.
2. Paper Tray lamp (Green)
• On
Shows whether the Tray or Front Paper Feed Slot is selected as the paper source.
• Off
Shows whether a Cassette or roll is selected as the paper source.
d. Display Screen
Shows the printer menu, as well as the printer status and messages.
e. Color Label
These labels indicate the Ink Tank colors and names. The labels correspond to the ink levels on
the Display Screen.
16 Printer Parts
Printer parts
f. Online Button
Switches the printer online and ofine. (→P.27)
• Lit (Green)
The printer is online.
• Flashing
The printer is recovering from Sleep mode.
• Off
The printer is ofine.
g. Feeder Selection Button
Switches the paper source. Each time you press this button, the paper source switches between
auto feed (when the paper source is a Cassette or roll) and manual feed (when the paper source is
the Tray or the Front Paper Feed Slot ). The corresponding lamp in the paper source section is lit.
h. Menu Button
Displays the main menu of the printer. (→P.47)
i. Information Button
Displays printer submenus. Press this key to display information about ink, paper, and so on.
(→P.60)
You can also hold down this button for three seconds to clean the Printhead ( Head Cleaning A ).
j. ◄ Button
Menu mode: Press this button to display the previous menu item or setting value.
k. ▲ Button
Ofine mode: Press this button to rewind rolls manually. (→P.126)
Menu mode: Press this button to display the menu one level higher.
l. ► Button
Menu mode: Press this button to display the next menu item or setting value.
m.▼ Button
Ofine mode: Press this button to feed roll paper manually. (→P.126)
Menu mode: Press this button to display the menu one level lower.
n. OK Button
In menu mode, press this button to conrm or execute the selected item or setting.
o. Power Button
Turns the printer on and off. (→P.20)
p. Stop/Eject Button
Stops jobs in progress or clears the menu and ejects the paper.
Note
• In Sleep mode, you can press any button to bring the printer online again.
Printer Parts 17
Printer parts
Vents
The vents are on top (1), on the right (2), and on the bottom on the right (3 and 4).
Caution
• Do not block these vents when the printer is on.
• Avoid setting paper or other light objects near the vents.
18 Printer Parts
Printer parts
Cassette
a. Width Guide
Adjust this guide to hold paper widthwise.
b. Length Guide
Adjust this guide to hold paper lengthwise.
c. Guide Lever
Squeeze these levers to slide the guides.
d. Maximum Capacity Line
A guide line indicating how many sheets can be loaded. Do not load paper over this line.
Printer Parts 19
Control Panel
Control Panel
Turning the Printer On and Off
Turning the printer on
1.
Press the Power button to turn on the printer.
After all lamps are lit and then go off, the printer starts up.
Initializing is displayed on the top line of the Display Screen, followed by the printer model
and version number.
Initializing
2.
The printer goes online after startup, and the Online lamp and paper source section lamp
remain lit.
The printer will not go online in the following situations. Take the appropriate action.
• The Top Cover is open
Close the Top Cover.
• The Ink Tank Cover is open
Close the Ink Tank Cover.
• The Printhead is not installed
see “Replacing the Printhead”. (→P.653)
• Ink Tank is not installed
see “Replacing Ink Tanks”. (→P.642)
• If “ERROR” is shown on the Display Screen.
Turn off the printer and contact your Canon dealer.
20 Printer Parts
Control Panel
• The Online lamp and Message lamp are not lit (even once), and nothing appears on the Display
Screen
Make sure the printer is plugged in correctly. Check the connection at the plug and electrical outlet.
Important
• Starting the printer when it is connected via the USB cable to a Macintosh computer that is off may
cause the computer to start up at the same time. To prevent this, disconnect the USB cable before
starting the printer. Connecting the printer to the computer via a USB hub may solve this issue.
Turning the printer off
Important
• Never turn the printer off or unplug it during a print job. This could damage the printer.
1.
Make sure no print jobs are in progress.
If the Message lamp is ashing, check the message on the Display Screen and take action as
necessary. (→P.731)
If the Data lamp is ashing, the printer is receiving a print job. Turn off the printer only after
printing is nished.
Printer Parts 21
Control Panel
2.
Hold down the Power button for more than a second.
After Shut Down.. is shown on the Display Screen, the printer shuts off.
Shut Down..
Please Wait..
22 Printer Parts
Control Panel
Printer Modes
Printer modes are classied as follows and described in this toopic.
•
•
•
•
•
•
Modes (→P.23)
Mode transition (→P.24)
Online, and state of the Control Panel (→P.24)
Ofine, and state of the Control Panel (→P.25)
Menu mode, and state of the Control Panel (→P.26)
Submenu mode, and state of the Control Panel (→P.26)
Modes
The printer has ve modes as follows:
• Online
The printer is ready to receive jobs sent from the computer. Jobs sent from the computer are processed
immediately. If jobs are received in other modes, they are printed the next time the printer goes online.
• Ofine
Any jobs sent from the computer are held without being processed.
While the printer is ofine, you can feed or cut roll paper manually.
The printer goes ofine automatically if jobs cannot be processed, such as if errors occur.
• Menu mode
Menus are displayed on the printer, and you can select, set, or execute menu items. Any jobs sent
from the computer are held without being printed.
• Submenu mode
Submenus are displayed regarding ink and paper information. Jobs can be received and printing is
possible while submenus are displayed and the printer is online. In other modes, any jobs sent from the
computer are held without being printed while submenus are displayed.
• Sleep mode
The printer is in power-saving mode. The printer automatically enters Sleep mode to conserve power if
it is idle for a specic period (by factory default, ve minutes), that is, if no print jobs are received or
buttons are pressed while all covers are closed.
You can specify the period before the printer enters Sleep mode in the Sleep Timer menu. (→P.47)
If any print jobs are received when the printer is in Sleep mode (after it was originally online), the
printer goes online and prints the jobs.
Printer Parts 23
Control Panel
Mode transition
The printer mode transitions are as follows:
*1: When submenus are displayed, you can press any button other than the Information button to return
to the previous mode.
*2: In Sleep mode, you can press any button to bring the printer online again.
*3: The printer automatically enters Sleep mode if it is idle for a specic period (by factory default, ve
minutes), that is, if no print jobs are received or buttons are pressed while all covers are closed.
Online, and state of the Control Panel
Online
██████
ISO A2
██████ █
• Top Line of the Display Screen
The printer status is displayed at left. At right, the size of paper loaded in the Cassette is displayed.
(→P.170)
• Bottom Line of the Display Screen
The remaining ink level is displayed at left and the Maintenance Cartridge capacity at right.
However, any warning messages are displayed here instead. In this case, take the appropriate action.
(→P.731)
• Online lamp (→P.16)
Lit when the printer is online.
• Data lamp (→P.16)
Flashes when print jobs are being received or processed.
• Message lamp (→P.16)
Lit when warning messages are displayed.
24 Printer Parts
Control Panel
Ofine, and state of the Control Panel
Ofine
Ofine
• Top Line of the Display Screen
The printer status is displayed here.
• Bottom Line of the Display Screen
Any warning messages are displayed here. In this case, take the appropriate action. (→P.731)
• Message lamp (→P.16)
Lit when warning messages are displayed.
Error Messages (If Action Can be Taken)
Maint Cartridge
Replace Cart
• Display Screen
Error messages are displayed in two pages. The pages are displayed alternately. Take the appropriate
action. (→P.731)
• Data lamp (→P.16)
Flashes when print jobs are being received.
• Message lamp (→P.16)
Flashes when error messages are displayed.
Error Messages (If Action Cannot be Taken)
ERROR Exxx-xxxx
Call For Service
• Display Screen
Error notication (“ERROR”) is displayed with the error code and a message.
Turn off the printer and wait at least three seconds before restoring the power.
If the message is still displayed after this, write down the error code and message, turn off the printer,
and contact the Canon dealer for assistance.
• Data lamp (→P.16)
Flashes when print jobs are being received.
• Message lamp (→P.16)
Flashes when error messages are displayed.
Printer Parts 25
Control Panel
Menu mode, and state of the Control Panel
Main menu
Paper Settings
Chk Remain.Roll
• Top Line of the Display Screen
Menus and menu items are displayed here.
• Bottom Line of the Display Screen
The selected item is displayed. Other items are available if “→” is displayed at right. Lower levels are
available if “↓” is displayed at right. If other items and lower levels are both available, “↓” and “→” are
displayed alternately. (→P.30)
Menu items and settings
Chk Remain.Roll
= On
• Top Line of the Display Screen
Menu items are displayed here.
• Bottom Line of the Display Screen
Menu items or settings are displayed here. An equals sign “=” displayed at left indicates that this is
the current value. (→P.30)
Submenu mode, and state of the Control Panel
When submenus are displayed
Ink
██████
██████ █
Information on ink and paper is shown on the top line of Display Screen and bottom lines of the Display
Screen. (→P.60)
26 Printer Parts
Control Panel
Switching Modes
Switching the Printer Online/Ofine
Press Online to switch the printer online or ofine.
When the printer is online, Online is shown on the Display Screen top line and the Online lamp is lit.
When the printer is ofine, Ofine is shown on the Display Screen top line and the Online lamp is off.
Depending on the status, the printer switches online and ofine as follows.
Printer Status
When Online is Pressed
Online
Switches to ofine and the Online lamp goes off.
Online (printing)
Switches ofine and printing is paused.
Ofine
Switches to online and the Online lamp is lit.
Ofine, when an error message
is displayed
If a Maintenance Cartridge error message is displayed, the error is
temporarily cleared; the printer switches to online and the Online lamp
is lit.
If the following error messages are displayed, the printer goes online and
printing is resumed.
• Check Supported Paper. (→P.741)
• Roll Paper / Please Replace (→P.738)
In the case of other error messages or if paper is not loaded, the printer
remains ofine until you solve the problem. The Online lamp remains off.
Menu mode
Switches to online and the Online lamp is lit.
Menu mode (printing)
Switches to online and the Online lamp is lit.
Print is resumed.
Printer Parts 27
Control Panel
Switching to Menu Mode
Press Menu to display the main menu.
MAIN MENU is shown on the Display Screen top line.
Depending on the status, the printer switches to Menu mode as follows.
When Menu is Pressed
Printer Status
Online
Switches to Menu mode.
Online (printing)
The printer stays online. It does not switch to Menu
mode.
Ofine
Switches to Menu mode.
Ofine (printing)
Menus available during printing are displayed.
Ofine, when an error message is displayed
You cannot access Menu mode until the problem is
solved.
Press the Information button to display the submenus.
Press Information to display information about ink, paper, and so on. Press Information repeatedly to
change the information displayed. (→P.60)
After you display a submenu, the printer will revert to the previous mode in about ve seconds if no print
job is received or if you do not operate the printer.
28 Printer Parts
Control Panel
Printer Menu Operations
For instructions on selecting menu items, see “Main Menu Operations”. (→P.30)
For details on menu levels and menu items, see “Menu Structure”. (→P.32)
The printer menu structure is made up of a main menu and submenus.
Access the main menu by pressing the Menu button on the Control Panel. The principal settings available in
the main menu are as follows:
• Paper Settings
Specify the type and size of paper.
• Print Settings
Adjust or clean the Printhead, or adjust the paper feed amount.
• Printer Settings
Congure the network settings, set the sleep timer, and specify the unit of measurement on the display.
Note
• By default, main menu settings apply to all print jobs. However, for settings that are also available in the
printer driver, the values specied in the printer driver take priority.
Access the submenu by pressing the Information button on the Control Panel. You can check the following
information in submenus.
•
•
•
•
Ink levels
Maintenance Cartridge capacity
Size and type of paper that is selected
Amount of roll paper left
Printer Parts 29
Control Panel
Main Menu Operations
Selecting Menu Items
To illustrate menu item selection, this section describes how to set the sleep timer for 10 minutes. For details
on the sleep timer, see “Main Menu Settings”. (→P.47)
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select System Setup, and then press ▼.
MAIN MENU
System Setup ↓
3.
Press ◄ or ► to select Sleep Timer, and then press ▼.
System Setup
Sleep Timer ↓
4.
Press ◄ or ► to select 10 min., and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Sleep Timer
= 10 min.
5.
Press the Online button to bring the printer online.
30 Printer Parts
Control Panel
Entering Numbers in Main Menu Settings
This section describes how to enter numbers for IP address settings.
1.
2.
Display a menu item for numerical input. (→P.30)
Press ◄ or ► to move the cursor (_) to each eld for entering numbers.
IP Address
=0.0.0.0
3.
4.
Press the OK button to prepare to enter the number.
Press ◄ or ► to select the number, and then press the OK button.
IP Address
=255.0.0.0
Note
• Hold down ◄ or ► to increase or decrease the value continuously.
5.
Press the Online button to bring the printer online.
If any of the settings is changed, a conrmation message is displayed. In this case, press
the OK button.
Selecting Submenu Items
Press the Information button to display the submenus.
Ink
██████
██████ █
Press the Information button to display information about ink, paper, and so on. Press Information
repeatedly to change the information displayed. (→P.60)
After you display a submenu, the printer will revert to the previous mode in about ve seconds if no print
job is received or if you do not operate the printer.
Printer Parts 31
Control Panel
Menu Structure
Main Menu
The structure of the main menu is as follows. Values at right indicated by an asterisk “*” are the defaults.
For instructions on selecting or setting menu items, see “Main Menu Operations”. (→P.30)
For details on menu items, see “Main Menu Settings”. (→P.47)
First Level
Paper Cut (*1)
Second Level
Third Level
No *
Yes
Head Cleaning
(*5)
Head Cleaning
A
Head Cleaning
B
Paper Settings
Cas Paper Type Plain Paper *
(*6)
Plain Paper HQ
(*6)
Plain Paper HG
(*6)
High Resolution
(*6)
Coated Paper
(*6)
Premium
MatteP (*6)
Matte Photo (*6)
HW
GlossyPhoto2
(*6)
HW
SemiGlPhoto2
(*6)
Photo
PaperPlus (*6)
PhotoPlus
SemiGl (*6)
CAD Trace
Paper (*6)
Special # Here,
the number is
1-10 (*6)
Cas Paper Size
ISO A2
ISO A3
ISO A3+
32 Printer Parts
Fourth Level
Fifth Level
Sixth Level
Control Panel
First Level
Second Level
Third Level
Fourth Level
Fifth Level
Sixth Level
ISO A4
JIS B3
JIS B4
ANSI C
ANSI B
ANSI B Super
ANSI Letter
ANSI Legal
ARCH B
14"x17"
12"x16"
10"x12"
10"x15"
8"x10"
16"x20"
13"x22"
Manual
Pap.Type (*10)
Plain Paper *
(*6)
Plain Paper HQ
(*6)
Plain Paper HG
(*6)
High Resolution
(*6)
Coated Paper
(*6)
HW Coated (*6)
Premium
MatteP (*6)
Matte Photo (*6)
Glossy Photo
(*6)
Semi-Gl Photo
(*6)
HW
GlossyPhoto2
(*6)
Printer Parts 33
Control Panel
First Level
Second Level
Third Level
HW
SemiGlPhoto2
(*6)
Poster Semi-Gl
(*6)
SatinPhoto 190
(*6)
Photo
PaperPlus (*6)
PhotoPlus
SemiGl (*6)
Backlit Film (*6)
Backprint Film
(*6)
ThinFab.
Banner2 (*6)
Proong Paper
(*6)
FineArt Photo
(*6)
FneArt HW
Photo (*6)
FineArt Txtr (*6)
FineArt Wtrclr
(*6)
FineArtBlockP
(*6)
Canvas Matte2
(*6)
JPN Paper
Washi (*6)
CAD Trace
Paper (*6)
CAD Matte Film
(*6)
POP Board (*6)
Special # Here,
the number is
1-10 (*6)
Manual
Pap.Size
ISO A2
ISO A2+
34 Printer Parts
Fourth Level
Fifth Level
Sixth Level
Control Panel
First Level
Second Level
Third Level
Fourth Level
Fifth Level
Sixth Level
ISO A3
ISO A3+
ISO A4
ISO B3
ISO B4
JIS B3
JIS B4
ANSI C
ANSI B
ANSI B Super
ANSI Letter
ANSI Legal
ARCH B
ARCH A
DIN C3
DIN C4
14"x17"
12"x16"
10"x12"
10"x15"
16"x20"
13"x22"
Roll Media Type Plain Paper HG
(*1), (*2)
* (*6)
Coated Paper
(*6)
HW Coated (*6)
Premium
MatteP (*6)
Glossy Photo
(*6)
Semi-Gl Photo
(*6)
HW
GlossyPhoto2
(*6)
Printer Parts 35
Control Panel
First Level
Second Level
Third Level
Fourth Level
HW
SemiGlPhoto2
(*6)
Poster Semi-Gl
(*6)
SatinPhoto 190
(*6)
Backlit Film (*6)
Backprint Film
(*6)
ThinFab.
Banner2 (*6)
Proong Paper
(*6)
FneArt HW
Photo (*6)
FineArt Txtr (*6)
FineArt Wtrclr
(*6)
FineArtBlockP
(*6)
Canvas Matte2
(*6)
JPN Paper
Washi (*6)
CAD Trace
Paper (*6)
Special # Here,
the number is
1-10 (*6)
Chk
Off *
Remain.Roll (*2)
On
Roll Length Set
(*2), (*3)
##.# m
### feet
Med.Detail Set.
(The paper type
is displayed
here.) (*6)
Roll DryingTime Off
30 sec.
1 min.
3 min.
36 Printer Parts
Fifth Level
Sixth Level
Control Panel
First Level
Second Level
Third Level
Fourth Level
Fifth Level
Sixth Level
5 min.
10 min.
30 min.
60 min.
Scan Wait Time
Off
1 sec.
3 sec.
5 sec.
7 sec.
9 sec.
Feed Priority
Automatic *
Band Joint
Print Length
Adjust Length
From -0.70% to
0.70%
Head Height
Automatic *
Highest
High
Standard
Low
Lowest
Skew Check Lv. High Accuracy
Standard *
Loose
Off
VacuumStrngth
Automatic *
Strongest
Strong
Standard
Weak
Weakest
NearEnd
RllMrgn (*2)
3mm
20mm
Cut Speed (*2)
Fast
Standard
Printer Parts 37
Control Panel
First Level
Second Level
Third Level
Fourth Level
Slow
Trim Edge First
(*2)
Automatic
On
Off *
Cutting Mode
(*2)
Automatic
Eject
Manual
Bordless
Margin (*2)
Automatic
Fixed
CutDustReduct. Off
(*2)
On
Nr End Sht Mrgn 3mm
20mm
Tray Source
Front
Top
Return Defaults No
Yes
Adjust Printer
Auto Head Adj.
Standard Adj.
No
Yes
Advanced Adj.
No
Yes
Auto Print
Off
On *
Manual Head
Adj
No
Yes
Auto Band Adj.
Standard Adj.
No
Yes
Advanced Adj.
No
Yes
Manual Band
Adj
Adjust Band
No
Yes
38 Printer Parts
Fifth Level
Sixth Level
Control Panel
First Level
Second Level
Third Level
Fourth Level
Fifth Level
Sixth Level
Adj Far Ed Feed No
Yes
Adjust Length
No
Yes
Calibration
Auto Adjust
No
Yes
Execution Log
(The date of
execution is
displayed.)
(The paper type is
displayed here.)
Use Adj. Value
No
Yes *
Return Defaults No
Yes
Interface Setup
EOP Timer
10 sec.
30 sec.
1 min.
2 min.
5 min.
10 min. *
30 min.
60 min.
TCP/IP
IP Mode
Automatic
Manual *
Protocol (*4)
DHCP
On
Off *
BOOTP
On
Off *
RARP
On
Off *
IP Setting
IP Address
0.0.0.0* 255.255.255.255
Subnet Mask
0.0.0.0* 255.255.255.255
Default G/W
0.0.0.0* 255.255.255.255
Printer Parts 39
Control Panel
First Level
Second Level
NetWare
Third Level
NetWare
Fourth Level
On
Off *
Frame Type (*8) Auto Detect
Ethernet 2
Ethernet 802.2 *
Ethernet 802.3
Ethernet SNAP
Print Service
(*8)
BinderyPServer
RPrinter
NDSPServer *
NPrinter
AppleTalk
On
Off *
Ethernet Driver
Auto Detect
On *
Off
Comm.Mode
(*7)
Half Duplex *
Full Duplex
Ethernet Type
(*7)
10 Base-T *
100 Base-TX
Spanning Tree
Not Use *
Use
MAC Address
Return Defaults No
Yes
Maintenance
Replace P.head
Left Printhead
No
Yes
Right Printhead No
Yes
Move Printer
No
Yes
Clean Roller
(*12)
No
Yes
Clean Platen
40 Printer Parts
No
Fifth Level
Sixth Level
Control Panel
First Level
Second Level
Third Level
Fourth Level
Fifth Level
Sixth Level
Yes
Spur Cleaning
No
Yes
System Setup
Warning
Buzzer
Off
On *
Detect
Mismatch
Pause
Warning
None *
Keep Media Size Off
On *
PaperSize Basis Sht Selection
ISO A3+ *
ANSI B Super
Roll Selection1
(*2)
ISO A3 (297mm)
*
300mm Roll
Roll Selection2
(*2)
10in. (254mm) *
JIS B4 (257mm)
TrimEdge
Reload
Automatic
Off *
On
Nozzle Check
Off
5 pages
10 pages
Automatic *
Sleep Timer
5 min. *
10 min.
15 min.
20 min.
30 min.
40 min.
50 min.
60 min.
240 min.
Length Unit
meter *
Printer Parts 41
Control Panel
First Level
Second Level
Third Level
Fourth Level
feet/inch
Time Zone
0:London (GMT)
+1:Paris,Rome
+2:Athens,Cairo
+3:Moscow
+4:Eerevan,
Baku
+5:Islamabad
+6:Dacca
+7:Bangkok
+8:Hong Kong
+9:Tokyo,Seoul
+10:Canberra
+11New
Caledonia
+12:Wellington
-12:Eniwetok
-11:Midway is.
-10Hawaii(AHST)
-9:Alaska(AKST)
-8:Oregon (PST)
-7:Arizona(MST)
-6:Texas (CST)
-5:NewYork(EST)
-4:Santiago
-3:Buenos Aires
-2:
-1:Cape Verde
Date Format
yyyy/mm/dd *
dd/mm/yyyy
mm/dd/yyyy
Date & Time
Language
42 Printer Parts
Date
yyyy/mm/dd (*9)
Time
hh:mm
Fifth Level
Sixth Level
Control Panel
First Level
Second Level
Reset
MediaType
Third Level
Fourth Level
Fifth Level
Sixth Level
No *
Yes
Test Print
Status Print
No
Yes
Media Details
No
Yes
Print Job Log
No
Yes
Menu Map
No
Yes
Nozzle Check
No
Yes
Information (*5)
Version
Firm
Boot
MIT
RAM
Ext. Interface
No
IEEE1394
MAC Address
000085######
Error Log
1:xxxxx
2:xxxxx
Job Log
(Choose from
Document Name
information about
the latest three
print jobs.)
User Name
Page Count
Printer Parts 43
Control Panel
First Level
Second Level
Third Level
Fourth Level
Job Status
Fifth Level
Sixth Level
OK
CANCELED
Print Start Time
yyyy/mm/dd
hh:mm
Print End Time
yyyy/mm/dd
hh:mm
Print Time
xxx sec.
Print Size
xxxxxxxx
sq.mm
Media Type
Interface
USB
Network
IEEE1394
Ink
Consumption
Counter
*1:
*2:
*3:
*4:
*5:
*6:
xx.x ml
Cut Count
Displayed if a roll is loaded.
Displayed if the Roll Feed Unit is installed.
Displayed if Chk Remain.Roll is On.
Displayed if IP Mode is Automatic.
Only these menus are displayed during printing.
For information on the types of paper Media Conguration Tool the printer supports, refer to the Paper
Reference Guide. (→P.107) The paper type setting in the printer driver and related software (as well as
on the Control Panel ) is updated when you install the Media Conguration Tool from the User Software
CD-ROM or if you change paper information by using the . See the Media Conguration Tool Guide
(Windows) or Media Conguration Tool Guide (Macintosh).
*7: Available only if Auto Detect is Off.
*8: Available only if NetWare is On.
*9: Follows the setting in Date Format.
*10: Displayed if paper is loaded in the tray.
*11: This menu is only displayed during printing.
*12: Not displayed if a roll or a sheet has been fed.
44 Printer Parts
Control Panel
Submenus
On the Control Panel, press the Information button to display information about ink, paper, and so on.
Each time you press the Information button on the Control Panel, different submenus are displayed in
the following order.
*1: Displayed if sheets are loaded.
*2: Displayed if a roll is loaded.
For details on submenu screens, see “Submenu Display”. (→P.60)
Printer Parts 45
Control Panel
Main menu during printing
The structure of the main menu during printing is as follows.
For instructions on selecting or setting menu items, see “Main Menu Operations”. (→P.30)
For details on menu items available during printing, see “Main Menu Settings (During Printing)”. (→P.58)
First Level
MAIN MENU
Second Level
Third Level
Head Cleaning
Head Cleaning
A
Fourth Level
Fifth Level
Sixth Level
Head Cleaning
B
Fine Band Adj.
From -5 to 5
Information
Version
Firm
Boot
MIT
RAM
Ext. Interface
No
IEEE1394
MAC Address
000085######
Error Log
1:xxxxx
2:xxxxx
Job Log
(Choose from
Document
information
Name
about the latest
three print jobs.)
User Name
Page Count
Job Status
OK
CANCELED
Print Start Time yyyy/mm/dd
hh:mm
Print End Time yyyy/mm/dd
hh:mm
Print Time
xxx sec.
Print Size
xxxxxxxx
sq.mm
Media Type
Interface
USB
Network
IEEE1394
Ink
Consumption
46 Printer Parts
xx.x ml
Control Panel
Main Menu Settings
Main menu items are described in the following tables.
For instructions on selecting or setting menu items, see “Main Menu Operations”. (→P.30)
For details on menu levels and values, see “Menu Structure”. (→P.32)
Setting Item
Description, Instructions
Paper Cut
Displayed if a roll is loaded.
Choose Yes to cut the roll at the current position. The paper will be fed, if
necessary, so that the sheet is at least 10 cm long after the cut. The paper will
not be cut if there is not enough paper left to feed the paper this much.
Head Cleaning
Printhead cleaning options. (→P.652)
Choose Head Cleaning A if printing is faint, oddly colored, or contains foreign
substances.
Choose Head Cleaning B if no ink is printed at all, or if printing is not improved
by Head Cleaning A .
Paper Settings
Specify the type and size of paper. (→P.48)
Med.Detail Set.
Specify detailed paper-related settings, including the ink drying time and
borderless printing options. (→P.49)
Adjust Printer
Adjust the Printhead alignment or amount of feed by printing a test pattern.
(→P.51)
Interface Setup
Congure the network settings. (→P.53)
Maintenance
Replace the Printhead , prepare to transfer the printer, and clean the Pick Up
Roller . (→P.54)
System Setup
Specify the printer system settings, including the date format and display
language. (→P.55)
Test Print
Choose Yes in Status Print to print information about the printer.
Choose Yes in Media Details to print the paper settings as specied in
Med.Detail Set.
Choose Yes in Print Job Log to print a record of print jobs, including the paper
type and size, amount of ink used, and so on.
Choose Yes in Menu Map to print a list of the main menu options.
Choose Yes in Nozzle Check to print a test pattern for checking the nozzles.
If you have selected a leading edge margin of 20mm in Nr End Sht Mrgn in
the printer menu, the test print sheet may not be printed completely.
Information
Displays the information about the printer and history of print jobs. (→P.57)
Printer Parts 47
Control Panel
Paper Settings
Setting Item
Description, Instructions
Cas Paper Type (*1)
Choose the type of paper in the Cassette .
(→P.167)
Cas Paper Size
Specify the size of paper in the Cassette .
(→P.170)
Manual Pap.Type (*1)
Choose the type of paper in the tray.
(→P.168)
Manual Pap.Size
Choose the size of paper in the tray.
(→P.193)
Roll Media Type (*1)
Choose the type of roll.
(→P.124)
Chk Remain.Roll
Choose On to print a barcode at the end of a roll before you remove it. The
printed barcode can be used in managing the amount of roll paper left. Choose
Off if you prefer not to print the barcode.
Roll Length Set
Displayed if Chk Remain.Roll is On .
If a barcode is not printed on rolls, specify the roll length. The roll length is
displayed in meters (1.0-91.0 m) or feet (1-300 ft.), depending on the setting
in Length Unit .
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide.
(→P.107) The paper type setting in the printer driver and related software (as well as on the Control
Panel ) is updated when you install the Media Conguration Tool from the User Software CD-ROM or if
you change paper information by using the Media Conguration Tool. See the Media Conguration
Tool Guide (Windows) or Media Conguration Tool Guide (Macintosh).
48 Printer Parts
Control Panel
Med.Detail Set.
Setting Item
(The paper type is
displayed here.) (*1)
Description, Instructions
Roll DryingTime
Specify the time to wait for the ink to dry for each sheet.
Scan Wait Time
Specify the time to wait for the ink to dry between each scan
in bidirectional printing, in consideration of how quickly the
paper absorbs ink. Note that printing will take longer if you
specify a wait time.
Feed Priority
Specify exact paper feeding, if desired. Normally, click
Automatic . Choose Print Length if you prefer to feed
the paper an exact amount. However, note that choosing
Print Length may result in slight banding in the direction of
Carriage scanning.
Adjust Length
Displayed if Feed Priority is Print Length .
Adjustment relative to the amount of stretching or shrinkage
of the current paper. For paper that tends to stretch, increase
the feed amount by choosing a higher adjustment value. For
paper that tends to shrink, decrease the feed amount by
choosing a lower adjustment value.
The setting for the amount of paper stretching or shrinkage
is relative. If you access it again later, it will be displayed as
0.00%.
Head Height
Adjust the Printhead height. (→P.614)
Skew Check Lv.
If you print on Japanese Paper Washi or other handmade
paper that has an irregular width, choose Loose for a higher
skew detection threshold, or choose Off to disable skew
detection. However, if paper is loaded askew when detection
is Off , note that paper jams or Platen soiling may occur.
If strict skew detection is required, choose High Accuracy .
VacuumStrngth
Specify the level of suction that holds paper against the Platen
. (→P.623)
NearEnd RllMrgn
Specify a margin at the leading edge of roll paper to ensure
better printing quality at the leading edge.
Note that if you choose 3mm , it may lower the printing quality
at the leading edge and affect feeding accuracy. The printed
surface may be scratched, and ink may adhere to the leading
edge.
Cut Speed
Choose the cutting speed. For media such as lm that are
more likely to generate debris when cut, choose Fast to
reduce the amount of debris.
Trim Edge First
If a roll is loaded, the end of the paper will be cut.
Choose On to have 40 mm (1.6 in) cut off the leading edge
of the roll every time after you load the roll. Scraps are then
removed.
When Automatic is selected, if the left and right side of
the leading edge of the roll are uneven (by 3 mm [0.12 in]
or more), the edge is cut an amount relative to the slant to
ensure a straight edge after you load the roll. Scraps are then
removed.
If the unevenness is less than 3 mm or if Off is selected, the
edge is not cut and scraps are not removed.
Printer Parts 49
Control Panel
Setting Item
(The paper type is
displayed here.) (*1)
Description, Instructions
Cutting Mode
Specify if the Cutter Unit is used for cutting.
Choose Automatic to have roll paper cut automatically after
printing. If you choose Eject , the paper will not be cut after
printing. Instead, a line will be printed at the cut position.
Bordless Margin
Choose On for margin adjustment during borderless printing.
CutDustReduct.
Choose On to reduce the amount of debris generated when
cutting lm and similar media by printing a line at the cut
position. This option reduces the amount of debris given off
after cutting. (→P.134)
Nr End Sht Mrgn
Specify a margin at the leading edge of sheets to ensure
better printing quality at the leading edge.
Note that if you choose 3mm , it may lower the printing quality
at the leading edge and affect feeding accuracy. The printed
surface may be scratched, and ink may adhere to the leading
edge.
If you have selected 20mm , the test print sheet may not be
printed completely.
Tray Source
Choose how the paper is supplied, Top for printing from the
Tray or Front for printing from the Front Paper Feed Slot .
Return Defaults
Choose Yes to restore Med.Detail Set. to the factory default
values.
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide.
(→P.107) The paper type setting in the printer driver and related software (as well as on the Control
Panel ) is updated when you install Media Conguration Tool from the User Software CD-ROM or if
you change paper information by using Media Conguration Tool.
50 Printer Parts
Control Panel
Adjust Printer
Setting Item
Auto Head Adj.
Standard Adj.
Choose Yes to have the printer print and read a test pattern
for automatic adjustment of the Printhead alignment relative to
the printing direction.
(→P.610)
Advanced Adj.
Choose Yes to have the printer print and read a test pattern
for the automatic adjustment of Printhead alignment relative to
the nozzle, ink tank, and printing direction.
Six sheets are required when printing on sheets.
(→P.610)
Auto Print
Choose On to have the printer automatically execute the
Advanced Adj. operations after you replace the Printhead .
(→P.610)
Manual Head Adj
Auto Band Adj.
Description, Instructions
Choose Yes to print a test pattern for adjustment of Printhead
alignment relative to the printing direction. Enter the
adjustment value manually based on the resulting pattern.
(→P.612)
Standard Adj.
Choose Yes to have the printer print and read a test pattern
for band adjustment, based on which the printer automatically
adjusts the feed amount.
(→P.615)
Advanced Adj.
Choose this option when using paper other than genuine
Canon paper, or paper for purposes other than checking
output.
Choose Yes to have the printer print and read a test pattern
for band adjustment, based on which the printer automatically
adjusts the feed amount. Note that this function takes more
time and requires more ink than Standard Adj.
Two sheets are required when printing on sheets.
(→P.615)
Manual Band Adj
Choose Yes to print a test pattern for adjusting the feed
amount based on the paper type.
Two sheets are required when printing on sheets.
(→P.619)
Adj Far Ed Feed
Choose Yes to print a test pattern for adjusting the feed
amount of the trailing edge of paper based on the paper type.
(→P.619)
Adjust Length
Choose Yes to print a test pattern for adjustment relative to
paper stretching or shrinkage, after which you can enter the
amount of adjustment.
(→P.624)
Printer Parts 51
Control Panel
Setting Item
Calibration
52 Printer Parts
Description, Instructions
Auto Adjust
Choose Yes for automatic adjustment of the adjustment value
after a test pattern for color calibration is printed. The most
recent adjustment value from color calibration is applied in
all printing.
Execution Log
The date of color calibration and the paper type is indicated
on the Display Screen .
Use Adj. Value
Select No to print without applying the color calibration
adjustment value. However, the printer driver settings will be
applied.
Select Yes to print applying the color calibration adjustment
value. However, the printer driver settings will be given priority.
Return Defaults
Clears the color calibration adjustment value and log.
Control Panel
Interface Setup
Setting Item
Description, Instructions
EOP Timer
TCP/IP
Specify the timeout period for print jobs.
IP Mode
Protocol
Choose whether the printer IP address is congured
automatically or a static IP address is entered manually.
DHCP
BOOTP
Specify the protocol used to congure the IP address
automatically.
RARP
IP Setting
IP Address
Subnet Mask
Default G/W
NetWare
NetWare
Specify the NetWare protocol. To apply your changes,
choose Store Setting .
Frame Type
Specify the frame type to use.
Print Service
Choose the print service.
AppleTalk
Ethernet
Driver
Return
Defaults
Specify the printer network information when using a
static IP address.
Enter the IP address assigned to the printer, as well as
the network subnet mask and default gateway.
Specify whether to use the AppleTalk protocol. To apply
your changes, choose Store Setting .
Auto Detect
Specify the communication method. To apply your
changes, choose Store Setting .
Choose On for automatic conguration of the LAN
communication protocol. Choose Off to use settings
values of Comm.Mode and Ethernet Type .
Comm.Mode
Choose the LAN communication method.
Ethernet Type
Choose the LAN transfer rate.
Spanning
Tree
Choose whether spanning-tree packets are supported
over the LAN.
MAC Address
Displays the MAC address.
▼ A conrmation message is displayed if you press
the [icon] button. Choose OK to restore the network
settings to the default values.
Printer Parts 53
Control Panel
Maintenance
Setting Item
Replace P.head
Description, Instructions
Left Printhead
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
When replacing the left Printhead , choose Yes and follow the
instructions on the screen. (→P.653)
Right Printhead
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
When replacing the right Printhead , choose Yes and follow
the instructions on the screen. (→P.653)
Move Printer
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
When transferring the printer to another location, choose Yes
and follow the instructions on the screen. (→P.679)
Clean Roller
Choose Yes to clean the Pick Up Roller . (→P.674)
Clean Platen
Use this function to clean inside the Top Cover . After you
select Yes , the Carriage is moved in preparation for Platen
cleaning. (→P.670)
Spur Cleaning
Click Yes to clean the spurs. (→P.675)
54 Printer Parts
Control Panel
System Setup
Setting Item
Warning
Buzzer
Set the buzzer. Choose On for the buzzer to sound in case
of errors.
Detect Mismatch
Choose Warning for notication (display of a warning
message) during printing if the paper type specied in
the printer menu does not match the paper type in the
printer driver. Choose None to continue to print without
notication. Choose Pause to have printing paused under
these circumstances. In this case, you can continue printing
by pressing the Online button.
Keep Media Size
PaperSize Basis
Description, Instructions
Choose On to use the paper size setting as the basis for
printing instead of other settings. The margin setting of the
printer menu will be used instead of the margin setting of the
printer driver if the latter is smaller, which may prevent text or
images in the margin from being printed. Choose Off to use
the printer driver settings instead. Even if the margin setting
of the printer driver is smaller than that of the printer menu,
text or images will not be cut off. However, this requires
longer paper because the actual margin will be equal to the
margin setting of the printer driver plus the margin setting of
the printer menu.
Sht Selection
If sheet size detection is activated, choose whether ISO
A3+ or ANSI B Super is applied when an inbetween size is
detected.
Roll Selection1
If roll size detection is activated, choose whether ISO A3
(297mm) and 300mm Roll is applied when an inbetween
size is detected.
Roll Selection2
If roll size detection is activated, choose whether 10in.
(254mm) or JIS B4 (257mm) is applied when an in between
size is detected.
TrimEdge Reload
Keeping a roll in the printer for a long time without printing on
it may leave a depression on the leading edge.
When printing quality is most important, we recommend
setting this option to On so that the paper edge is
automatically cut before printing.
Nozzle Check
Specify the timing for automatic checks of nozzle clogging.
Choose Off to disable checking. Choose 5 pages to check
after every 5 pages are printed. Choose 10 pages to check
once after every ten pages are printed.
Sleep Timer
Specify the period before the printer enters sleep mode.
Length Unit
Choose the unit of measurement when roll length is displayed.
You can switch the unit displayed for Roll Length Set and the
remaining paper amount displayed in the submenu.
Time Zone
Specify the time zone. Time zone options indicate a main city
in this time zone and the difference from Greenwich Mean
Time.
Date Format
Specify the date format.
Printer Parts 55
Control Panel
Setting Item
Date & Time
Description, Instructions
Date
Set the current date.
Time
Set the current time.
Language
Specify the language used on the Display Screen .
Reset MediaType
Restores settings that you have changed with Media
Conguration Tool to the factory default values. If paper
added using the Media Conguration Tool was used for color
calibration, such color calibration can no longer be applied to
any type of paper.
56 Printer Parts
Control Panel
Information
Setting Item
Description, Instructions
Version
Displays the version of the printer and rmware.
RAM
Displays the printer memory capacity.
Ext. Interface
Identies boards in the expansion slot.
MAC Address
000085######
Displays the MAC address.
Error Log
Job Log
Displays the most recent error messages (up to two).
(Choose from
information
about the latest
three print
jobs.)
Document
Name
Displays the document name in the last print job.
User Name
Displays the name of the user who sent the print job.
Page Count
Displays the number of pages in the print job.
Job Status
Displays the results of the print job processed.
Print Start
Time
Displays the time when the print job was started.
Print End Time Displays the time when the print job was nished.
Counter
Cut Count
Print Time
Displays the time required to print the job.
Print Size
Displays the paper size in the print job.
Media Type
Displays the paper type in the print job.
Interface
Displays the interface used for the print job.
Ink
Consumption
Displays the ink density of each color in the print job.
Displays the total number of cuts made by the Cutter
Unit .
Printer Parts 57
Control Panel
Main Menu Settings (During Printing)
Main menu items during printing are described in the following tables.
For instructions on selecting or setting menu items, see “Main Menu Operations”. (→P.30)
For details on menu levels and values, see “Menu Structure”. (→P.32)
Setting Item
Description, Instructions
Head Cleaning
Specify Printhead cleaning options. (→P.652)
Choose Head Cleaning A if printing is faint, oddly colored, or contains
foreign substances.
Choose Head Cleaning B if no ink is printed at all, or if printing is not
improved by Head Cleaning A .
Adjust Band
Displayed during print jobs. Fine-tune the feed amount manually.
Information
Displays information about the printer and record of print jobs. (→P.59)
58 Printer Parts
Control Panel
Information
Setting Item
Description, Instructions
Version
Displays the version of the printer and rmware.
RAM
Displays the printer memory capacity.
Ext. Interface
Identies boards in the expansion slot.
MAC Address
000085######
Displays the MAC address.
Error Log
Job Log
Displays the most recent error messages (up to two).
(Choose from
information
about the latest
three print
jobs.)
Document
Name
Displays the document name in the last print job.
User Name
Displays the name of the user who sent the print job.
Page Count
Displays the number of pages in the print job.
Job Status
Displays the results of the print job processed.
Print Start
Time
Displays the time when the print job was started.
Print End Time Displays the time when the print job was nished.
Counter
Cut Count
Print Time
Displays the time required to print the job.
Print Size
Displays the paper size in the print job.
Media Type
Displays the paper type in the print job.
Interface
Displays the interface used for the print job.
Ink
Consumption
Displays the ink consumption.
Displays the total number of cuts made by the Cutter
Unit .
Printer Parts 59
Control Panel
Submenu Display
Press the Information button to display the following information, one item after another: remaining ink levels
and Maintenance Cartridge capacity, size and type of the paper loaded in the Cassette, size and type of the
paper loaded in the tray, roll width and remaining length, and roll type.
Remaining ink levels and Maintenance Cartridge capacity
The remaining level of each ink is shown on the Display Screen bottom line at left. These levels shown on the
Display Screen correspond to the inks identied by the Color Label below the Display Screen.
Remaining ink is indicated in seven levels.
Note
•
•
•
•
When Ink Tank are not installed, the level is not displayed.
If error messages about Ink Tank are displayed, the level is indicated with one dot.
If you disable ink level detection, a question mark “?” is displayed.
When no more ink is left, the level indicator changes to a blank square and ashes.
The remaining capacity of the Maintenance Cartridge is shown on the Display Screen bottom line at right.
The available capacity of the Maintenance Cartridge is indicated in seven levels.
Cassette type
Displays the type of paper loaded in the Cassette.
Cas Paper Type
Plain Paper
Cassette paper size
Displays the size of paper loaded in the Cassette.
Cas Paper Size
ISO A4
60 Printer Parts
Control Panel
Manual Paper Type
Displays the type of paper loaded in the tray. This information is displayed only when paper is loaded
in the tray.
Manual Pap.Type
Plain Paper
Manual Paper Size
Displays the size of paper loaded in the tray. This information is displayed only when paper is loaded in the tray.
Manual Pap.Size
ISO A4
Roll: width and remaining length
Displays the width and remaining length of roll loaded in the Roll Feed Unit. This information is displayed only
when a roll is loaded and Chk Remain.Roll is On.
Roll : 17 inch
##.# m Left
Roll: width and type
Displays the width and type of roll loaded in the Roll Feed Unit. This information is displayed only when a
roll is loaded.
Roll : 17 inch
Plain Paper
Printer Parts 61
Control Panel
Status Print
You can print a Status Print report indicating the current status of the printer.
With Status Print, information is printed regarding the printer rmware version, various settings, and the
utilization level of consumables.
Note
• If you have selected 20mm in Nr End Sht Mrgn in the printer menu, the Status Print sheet may not
be printed completely.
(→P.47)
Printing Status Print Reports
1.
Load paper.
If using sheets, load paper A4/Letter-sized. You will need at least four sheets.
2.
Press the Menu button to display MAIN MENU.
3.
Press ◄ or ► to select Test Print, and then press ▼.
MAIN MENU
Test Print ↓
4.
Press ◄ or ► to select Status Print, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Test Print
= Status Print
62 Printer Parts
Control Panel
Checking the information in the Status Print report
The following information is included in the Status Print report.
Canon imagePROGRAF iPFxxxx Status Print
Printer model
Firm
Firmware version
Boot
Boot version
MIT
MIT format version
S/N
Printer serial number
Y, PC, C, PGY, GY, MBK, PM, M,
BK, R, G, B
Ink levels.
The remaining ink is displayed in a ve-level scale.
MC
Maintenance Cartridge capacity (%)
Media Menu
Information on the loaded paper.
Cassette Paper Type
Cassette Paper Size
Roll Media Type
Check Remain. Roll
Cut Sheet Type
Adjust Printer
Current printer settings.
Head Adjust
Printhead adjustment value.
Auto Print
A1-F2
Feed Priority
Settings related to paper feeding.
Adjust Length
Calibration
The color calibration setting value.
Execution Log
Date:
Media:
Use Effect Value:
The calibration log.
Indicates the date calibration was performed and the type of paper
used.
This value indicates whether the results of color calibration are used
or not.
Printer Parts 63
Control Panel
Interface Setup
Current network settings.
EOP Timer
Sets the elapsed time between receiving last data and
canceling printing.
TCP/IP
Settings related to TCP/IP .
IP Mode
Protocol
DHCP
BOOTP
RARP
IP Setting
IP Setting values.
IP Address
Subnet
Mask
Default
G/W
NetWare
NetWare settings.
NetWare
Frame Type
Print Service
AppleTalk
Values that specify whether AppleTalk is active or not.
Ethernet Driver
Ethernet Driver settings.
Auto Detect
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
64 Printer Parts
Control Panel
System Setup
Warning
Current warning and error settings.
Buzzer
Detect Mismatch
Keep Media Size
Current paper-related settings.
Sheet Selection
Roll Selection 1
Roll Selection 2
Nozzle Check
Nozzle-check settings.
Sleep Timer
General printer settings.
Length Unit
Time Zone
Date Format
Language
Contrast Adj.
Information
System information and an error log.
RAM
Ext. Interface
Error Log
Printer Parts 65
Control Panel
Network (RemoteUI)
Current network settings used by RemoteUI.
TCP/IP
Frame Type
Use DHCP
Use BOOTP
Use RARP
Raw Mode Bi-direction
Enable DNS Dynamic
Update
Use Zeroconf Function
IP Address*
Subnet Mask*
Gateway Address*
LPD Printing
IPP Printing
IPP Printer URI
RAW Printing
Raw Port Number
Raw Mode Bi-direction
FTP Printing
Primary DNS Server
Address*
Secondary DNS Server
Address*
DNS Host Name*
DNS Domain Name*
Multicast DNS Service
Name
*: Blank if the status has been saved by using Status Monitor.
NetWare
Current NetWare settings.
Frame Type
IPX External Network
Number*
Node Number*
Print Service
*: Depending on the NetWare print service settings, information on one of the following four items is printed.
66 Printer Parts
Control Panel
Bindery PServer
File Server
Name*
Values set when NetWare > Print Service > Bindery PServer is
selected.
Print Server
Name*
Print Server
Password*
Polling Interval
RPrinter
Values set when NetWare > Print Service > RPrinter is selected.
Print Server
Name*
Printer Number*
NDS PServer
Values set when NetWare > Print Service > NDS PServer is selected.
Tree Name*
Context Name*
Print Server
Name*
Print Server
Password*
Polling Interval
NPrinter
Values set when NetWare > Print Service > NPrinter is selected.
Print Server
Name*
Printer Number*
*: Blank if the status has been saved by using Status Monitor.
Printer Parts 67
Control Panel
AppleTalk
Current AppleTalk settings.
Phase Type
Name*
Network Number*
Zone*
*: Blank if the status has been saved by using Status Monitor.
HEAD LOT NUMBER
Printhead lot number.
LOT R,L
PARTS STATUS
Utilization status of replacement parts that require servicing.
COUNTER A-I
COUNTER
Utilization status of the cutter, media, and other items (indicating how
much they have been used).
CUTTER
MEDIA
MEDIA1-7
NAME
TTL
ROLL
CUTSHEET
CASSETTE
AFTER INSTALLATION
68 Printer Parts
Optional accessories
Optional accessories
Stand
The printer can be mounted on the following Stand. (Optional)
• Printer Stand ST-11
Note
• For details on assembling the Stand, refer to the instructions provided with the Stand.
Printer Parts 69
Optional accessories
Roll Holder Set
A set of parts including a Roll Holder, Holder Stopper (for 2- and 3-inch paper cores), 3-Inch Paper Core
Attachment, and Spacer for Borderless Printing (used for both 2- and 3-inch paper cores).
To load a roll with a 3-inch paper core, insert the 3-Inch Paper Core Attachment on the Roll Holder and attach
the Holder Stopper for 3-inch paper cores. If you use an A2 (420 mm [16.5 in]) roll for borderless printing,
insert the Spacer for Borderless Printing on the Roll Holder.
• Roll Holder Set RH2-11
• Roll Holder
• Holder Stopper (for 2- and 3-inch paper cores (a) and (b))
• 3-Inch Paper Core Attachment
• Spacer for Borderless Printing
For instructions on installing these parts, see “Attaching Accessories to the Roll Holder”. (→P.144)
70 Printer Parts
Optional accessories
Desktop Stacker
The printer can be used with the following Desktop Stacker. (Optional)
• Desktop Stacker BU-02
Note
• For Desktop Stacker installation instructions, refer to the instructions provided with the Desktop Stacker.
IEEE 1394 Expansion Board
An interface board to add an IEEE 1394 (also called "FireWire") port.
• IEEE1394 Expansion Board EB-05
For instructions on installing the IEEE 1394 expansion board, refer to the documentation provided with the
optional IEEE 1394 expansion board.
Printer Parts 71
Printer Specications
Printer Specications
Specications
Important
• This information is subject to change as the printer is updated.
• The following values may vary depending on the operating environment.
Printer
Power supply
Power consumption
100-120 V AC (50/60 Hz), 220-240 V AC (50/60 Hz)
In operation
100 W max.
Sleep mode
100-120 V: 5 W max.
(8 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
220-240 V: 6 W max.
(9 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
Off
1 W max. (*1)
Operating noise
Operating
environment
Approx. 51 dB (A) max.
Temperature
15-30°C (59-86°F)
Humidity
10-80%, non-condensing
Dimensions (W × D × H)
999×810×344 mm (39.3×31.9×13.5 in)
Weight
(not including the Printhead and Ink Tank )
49 kg (108.0 lb)
Space required for installation (*2)
1,299×1,910×644 mm (51.1×75.2×25.4 in)
Applicable standards
International Energy Star Program, Law on Promoting Green
Purchasing, GPN, RoHS, The Eco Declaration, WEEE, U.S.
presidential directives
*1: The printer uses a trace amount of power even when turned off. To stop all power consumption,
turn off the printer and unplug the power cord.
*2: Normally, you will need to ensure an unobstructed space of 800 mm (31.5 in) in front of the printer, 300
mm (11.8 in) behind, 150 mm (5.9 in) on both sides, and 300 mm (11.8 in) above the printer. Only
when printing from the Front Paper Feed Slot, leave 800 mm (31.5 in) of unobstructed space in front
of the printer and 400 mm (15.7 in) behind it.
72 Printer Parts
Printer Specications
Printing performance
Print method
Bubblejet
Maximum resolution
2400 dpi horizontally (*1) × 1200 dpi vertically
Printhead
PF-03
Number of nozzles
2,560 per color
*1: Prints with a minimum 1/2400 inch dot pitch between ink droplets.
Interface
Expansion Board Slots
1
USB 2.0(*1)
Format
Internal port
Mode
Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
Connector
Series B (4-pin)
Format
Internal port
Specication
IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX
/Auto-Negotiation, IEEE 802.3x Full Duplex
Protocols
IPX/SPX (Netware 4.2, 5.1, 6.0), SNMP, HTTP, TCP/IP,
AppleTalk
Format
Optional boards (slot type)
Specication
IEEE 1394-1995, conforms to P1394a Specication ver. 2.0,
half duplex, Data/Strb differential serial
Transfer speed
100/200/400 Mbps
Connector
Conforms to IEEE 1394-1995 (6-pin), no power supply
Ethernet(*3)
IEEE 1394 (*2)
*1: Use in USB 2.0 High Speed mode requires the following environment:
• Computer: USB 2.0 High-Speed-compatible
• Operating system: Windows Vista/Windows Server 2003/Windows XP/Windows
2000 or Mac OS X ver. 10.3.3 or later
• USB 2.0 driver: Microsoft USB 2.0 driver (available from Windows Update or the Service Pack.)
• USB cable: Certied USB 2.0 cable
*2: One IEEE 1394 (FireWire) expansion board can be installed.
*3: In the European Union, use a shielded LAN cable to comply with EN 55022: 1998 +A1: 2000 and
A2: 2003.
Printer Parts 73
Printer Specications
Ink
Ink Tank
Capacity
BK Ink Tank ( Black Ink )
Pigment ink
PFI-103BK (user-replaceable)
MBK Ink Tank ( Matte Black Ink , or
black ink for matte paper)
Pigment ink
PFI-103MBK (user-replaceable)
C Ink Tank ( Cyan Ink )
Pigment ink
PFI-101C (user-replaceable)
M Ink Tank ( Magenta Ink )
Pigment ink
PFI-101M (user-replaceable)
Y Ink Tank ( Yellow Ink )
Pigment ink
PFI-101Y (user-replaceable)
PM Ink Tank ( Photo Magenta Ink )
Pigment ink
PFI-101PM (user-replaceable)
PC Ink Tank ( Photo Cyan Ink )
Pigment ink
PFI-101PC (user-replaceable)
GY Ink Tank ( Gray Ink )
Pigment ink
PFI-103GY (user-replaceable)
PGY Ink Tank ( Photo Gray Ink )
Pigment ink
PFI-103PGY (user-replaceable)
R Ink Tank ( Red Ink )
Pigment ink
PFI-101R (user-replaceable)
G Ink Tank ( Green Ink )
Pigment ink
PFI-101G (user-replaceable)
B Ink Tank ( Blue Ink )
Pigment ink
PFI-101B (user-replaceable)
130 ml per color (*1)
*1: Printable pages when using the provided Starter Ink Tanks (90 ml per tank)
74 Printer Parts
Printer Specications
Paper (*1)
Paper width
203-432 mm (8-17 in)
Maximum
Sheets
length per page
Cassette
594 mm (23.4 in)
Tray (top)
1600 mm (24 in)
Tray (front)
914 mm (24 in)
Rolls
Thickness
Sheets
18 m (19.7 yd.)
Cassette
0.08-0.3 mm (0.003-0.012 in)
Tray (top)
0.08-0.8 mm (0.003-0.031 in)
Tray (front)
0.5-1.5 mm (0.02-0.06 in)
Rolls
Paper size
Print area
Sheets
0.08-0.8 mm (0.003-0.031 in)
Supported sizes ISO A2, ISO A2+, ISO A3, ISO A3+, ISO A4, ISO B3,
ISO B4, JIS B3, JIS B4, 17"×22" (ANSI C), 11"×17"
(Ledger), 13"×19" (Super B), Letter (8.5"×11"), Legal
(8.5"×14"), 12"×18" (ARCH B),9"×12" (ARCH A), DIN
C3, DIN C4, 14"×17", 12"×16", 10"×12", 10"×15", US
Photo, 13"×22", 300×900 mm
Cassette
ISO A2, ISO A3, ISO A3+, ISO A4, ISO B3, JIS B4,
17"×22" (ANSI C), 11"×17" (Ledger), 13"×19" (Super
B), Letter (8.5"×11"), Legal (8.5"×14"), 12"×18" (ARCH
B), 14"×17", 12"×16", 10"×12", 10"×15", 8"×10", US
Photo, 13"×22"
Tray (top)
• Width: 203-432 mm (8-17 in)
• Length: 279-1600 mm (11-24 in)
Tray (front)
• Width: 203-432 mm (8-17 in)
• Length: 520-914 mm (20.5-24 in)
Rolls
8 inches (203 mm), 10 inches (254 mm), JIS B4 (257
mm), ISO A3/A4 (297 mm), Banner (300 mm), A3+ (329
mm), 14 inches (356 mm), 16 inches (407 mm), ISO
A2/A3 (420 mm), 17 inches (432 mm)
Normal size
Printable area
• Sheets ( Cassette )
3 mm (0.12 in) from each side
• Sheets ( Top Paper Feed Slot )
3 or 23 mm (0.12 or 0.91 in) on all sides
• Sheets ( Front Paper Feed Slot )
3 mm (0.12 in) on top, 23 mm (0.9 in) on bottom, and
3 mm (0.12 in) on both sides
• Rolls
3 mm (0.12 in) from each side
For information on the recommended print area, see
“Print Area”. (→P.78)
Printer Parts 75
Printer Specications
Print area
Borderless printing (*2)
Printable area (rolls)
Entire surface
Oversized (*2), (*3)
Printable area
Entire surface
Supported width for borderless printing
10 inches (254 mm), JIS B4 (257 mm), A3+ (329 mm),
14 inches (356 mm), 16 inches (407 mm), ISO A2/A3
(420 mm) (*4), 17 inches (432 mm)
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide.
(→P.107)
*2: Printing may not be possible in some cases, depending on the type and size of paper.
*3: Load paper at least 6 mm (0.24 in) wider and 6 mm higher than the size selected in Page Size for roll
paper and the Cassette. Or, load paper at least 26 mm (1.0 in) higher for the tray.
*4: Borderless printing requires the Spacer for Borderless Printing.
Paper capacity (Cassette)
Paper type
Paper size
A4, Letter
13×22 in A3
17×22 in A2
Plain Paper
250 sheets
100 sheets
50 sheets
Coated Paper
200 sheets
100 sheets
50 sheets
Photo Paper Plus
20 sheets
20 sheets
-
Premium Matte Paper
30 sheets
20 sheets
-
Glossy Paper
100 sheets
50 sheets
-
• The preceding information is a guideline for the maximum capacity. Load the paper making
sure not to exceed the Maximum Capacity Line of the Cassette. (→P.19)
• The maximum paper capacity varies depending on the paper type. For more
information, see the Paper Reference Guide. (→P.107)
Maximum stacking capacity
The Output Tray can accommodate up to 20 sheets of A2/A3+ paper or 50 sheets of A3/A4 paper.
The maximum stacking capacity varies depending on the paper type. For more information, see the Paper
Reference Guide. (→P.107)
76 Printer Parts
Printer Specications
Basic Environmental Performance
Printer
Power consumption
Resource efciency
Sleep mode
100-120 V: 5 W max.
(8 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
220-240 V: 6 W max.
(9 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
Off
1 W max.
Weight
Printer only: 49 kg (108 lb)
Dimensions (W × D × 999×810×344 mm [39.3×31.9×13.5 in]
H)
Product safety
Recycling
Recyclable plastic used for printer body
Toxic substances
Structural components: No prohibited brominated ame
retardants used (PBB or PBDE)
Body plastic: No heavy metals (Pb, Hg, Cr[Vl], or Cd) or
halogenated ame retardants used
Operating noise
Approx. 51 dB (A) max.
Packaging materials
Heavy metal content (Pb, Hg, Cr[Vl], and Cd)
None (none in packaging)
Printer Parts 77
Printer Specications
Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in
borderless printing, the actual printing area corresponds to the paper size minus the space for this margin.
Cassette
Printable Area
Bottom
Top Edge
Sides
Edge
3 mm (0.12 3 mm (0.12 3 mm (0.12
in)
in)
in)
Top Paper
Sheets Feed Slot
3 mm (0.12
in)
3/23 mm
(0.12/0.91
in)
3 mm (0.12
in)
Front
Paper
Feed Slot
3 mm (0.12
in)
23 mm (0.91
in)
3 mm (0.12
in)
0/3 mm
(0/0.12 in)
0/3 mm
(0/0.12 in)
0/3 mm
(0/0.12 in)
Rolls
Recommended Print Area
Bottom
Top Edge
Sides
Edge
20 mm (0.79 27 mm (1.06
in)
in)
5 mm (0.20
in)
20 mm (0.79
in)
5 mm (0.20
in)
5 mm (0.20
in)
Sheets
• Printable Area:
When printing from the Cassette, a margin of 3 mm (0.12 in) on all sides is required.
Printing from the Top Paper Feed Slot requires a margin of 3 mm (0.12 in) on all sides. (A bottom margin
of 23 mm [0.9 in] may sometimes be required.) The bottom margin is 23 mm for some types of paper.
For more information, see the Paper Reference Guide. (→P.107)
When printing from the Front Paper Feed Slot, a margin of 23 mm (0.9 in) on all sides is required.
• Recommended print area:
A margin of 20 mm (0.79 in) on top, 27 mm (1.06 in) on bottom, and 5 mm (0.20 in) on left and right
sides is required.
78 Printer Parts
Printer Specications
Note
• Printable area: The area that can be printed.
• Guaranteed Print Area: We recommend printing within this area.
• To print so that your original matches the print area exactly, use an oversized paper size that includes
the required margin. (→P.305)
• You can choose a bottom margin of 3 mm or 23 mm when printing from the Top Paper Feed Slot.
In the printer driver, choosing Manual in Media Source sets the bottom margin at 23 mm. On the
other hand, choosing Manual (3mm margins) in Media Source sets the bottom margin at 3 mm,
which provides a larger area for printing.
However, the option Manual (3mm margins) is not available with the following paper.
• Fine Art Photo Paper
• Fine Art Heavyweight Photo Paper
• Fine Art Textured Paper
• The types of paper listed above may be updated, in some cases.
For details on paper types, see the Paper Reference Guide. (→P.107)
• If you set the bottom margin at 3 mm, images in the bottom margin may be distorted.
In this case, choose Manual in Media Source to set the bottom margin at 23 mm.
Rolls
• Printable Area:
A margin of 3 mm (0.12 in) on all sides is required. A margin of 3 mm (0.12 in) on the top, bottom, and
both sides is required. During borderless printing, the margin on all sides is 0 mm. For information on
paper compatible with borderless printing, see the Paper Reference Guide. (→P.107)
• Recommended print area:
A margin of 20 mm (0.79 in) on top, 5 mm (0.20 in) on bottom, and 5 mm (0.20 in) on left and right
sides is required.
Note
• Printable area: The area that can be printed.
• Guaranteed Print Area: We recommend printing within this area.
• To print so that your original matches the print area exactly, use an oversized paper size that includes
the required margin. (→P.305)
Printer Parts 79
Printing procedure
Basic Printing Workow
Printing procedure
Loading and Printing on Sheets in the Cassette
These are the basic steps for loading sheets in the cassette and then printing from the cassette.
Follow the steps below to load and print on sheets in the cassette.
1.
Turn the printer on. (→P.20)
2.
Load paper in the Cassette. (→P.156)
80 Basic Printing Workow
Printing procedure
3.
Complete settings in the printer driver for the type of paper and other details.
• Specifying Paper in the Printer Driver (Windows) (→P.94)
• Specifying Paper in the Printer Driver (Mac OS X) (→P.96)
• Specifying Paper in the Printer Driver (Mac OS 9) (→P.98)
4.
Send the print job.
• Printing from Windows (→P.89)
• Printing from Mac OS X (→P.90)
• Printing from Mac OS 9 (→P.92)
Start printing.
Note
• For details on supported paper sizes for the Cassette, see Paper Sizes (→P.112) or the Paper
Reference Guide. (→P.107)
Basic Printing Workow 81
Printing procedure
Loading and Printing on Rolls
These are the basic steps for loading and printing on rolls.
Follow the steps below to switch to a new roll or a roll of a different type or width before printing.
Note
• If a sheet is loaded in the Tray, remove it before this procedure. (→P.146)
• Before printing banners or other large-format documents, spread a clean cloth or paper over the oor.
Long sheets that touch the oor after printing may become dirty.
• If you will wait for the ink to dry after printing and simply eject the document, you can deactivate
automatic cutting and print a cut line instead. (→P.130)
1.
Turn the printer on. (→P.20)
2.
Select roll paper (a) as the paper source. (→P.114)
82 Basic Printing Workow
Printing procedure
3.
Load a roll on the Roll Holder. (→P.115)
Note
• When switching rolls, rst remove the current roll from the Roll Holder. (→P.117)
4.
Load the roll in the Roll Feed Unit. (→P.118)
Basic Printing Workow 83
Printing procedure
5.
Select the paper type. (→P.124)
6.
Select the paper length. (→P.125)
7.
Complete settings in the printer driver for the type of paper and other details.
• Specifying Paper in the Printer Driver (Windows) (→P.94)
• Specifying Paper in the Printer Driver (Mac OS X) (→P.96)
• Specifying Paper in the Printer Driver (Mac OS 9) (→P.98)
84 Basic Printing Workow
Printing procedure
Important
• Always specify the same type and size of paper in the printer menu and printer driver.
If the type and size do not match, an error message may be displayed and printing may not be
possible.
• PaprTyp Mismatch (→P.735)
• PaprSiz Mismatch (→P.736)
• Paper Mismatch (→P.735)
8.
Start printing.
• Printing from Windows (→P.89)
• Printing from Mac OS X (→P.90)
• Printing from Mac OS 9 (→P.92)
Note
• Steps 5 and 6 are not required, if a barcode has been printed on the roll and you have activated
automatic detection of the remaining roll paper. The paper type and amount of paper left are
automatically detected.
• Keeping a roll in the printer for a long time without printing on it may leave a depression on the leading
edge.
When printing quality is most important, we recommend setting TrimEdge Reload to On so that the
paper edge is automatically cut before printing.
• For details on supported sizes and types of the roll that can be loaded, see Paper Sizes (→P.112) or
the Paper Reference Guide. (→P.107)
• Clean the platen after you have used up a roll. (→P.670)
• When a roll has been advanced, do not pull it out by force. This will prevent the paper from being
advanced.
If you accidentally pull out the paper, hold the Stop/Eject button to enable feeding again.
(→P.122)
Basic Printing Workow 85
Printing procedure
Loading and Printing on Sheets in the Paper Feed Slot
These are the basic steps for loading sheets in the paper feed slot and then printing from this slot.
Follow the steps below to load and print on sheets in the paper feed slot.
Note
• If a roll is loaded, rewind the roll before this procedure.
(→P.146)
1.
Turn the printer on. (→P.20)
2.
Complete settings in the printer driver for the type and size of paper and other details.
• Specifying Paper in the Printer Driver (Windows) (→P.94)
• Specifying Paper in the Printer Driver (Mac OS X) (→P.96)
• Specifying Paper in the Printer Driver (Mac OS 9) (→P.98)
86 Basic Printing Workow
Printing procedure
3.
Send the print job.
• Printing from Windows (→P.89)
• Printing from Mac OS X (→P.90)
• Printing from Mac OS 9 (→P.92)
4.
Load a sheet manually. (→P.159)
(Top Paper Feed Slot)
(Front Paper Feed Slot)
Note
• If you will load a sheet before sending a print job, you must select the type and size of paper in
advance on the printer Display Screen. Follow these steps.
• Selecting the Paper Type (Tray) (→P.168)
• Selecting the Paper Size (Tray) (→P.193)
5.
Start printing.
Note
• For details on supported sizes and types of the paper that can be loaded in the tray, see Paper Sizes
(→P.112) or the Paper Reference Guide. (→P.107)
Basic Printing Workow 87
Printing procedure
Printing Options Using Rolls and Sheets
The printer supports both rolls and sheets. Take advantage of each type of paper for a wide range of printing
applications.
Rolls and Sheets
• Media in spooled rolls is generally called Roll Media.
Rolls can be used to print large photos or create posters or banners that cannot be printed on regular
sheets.
• Sheets refers to individual sheets of paper in regular sizes.
Sheets are loaded in either the Cassette or the Tray.
Heavyweight paper is loaded in the Front Paper Feed Slot.
Paper Size
• Page Size: The size of the image to be printed, as specied in the application.
• Paper Size (also called Media Size):
• In the case of sheets, paper size refers to the actual size of the paper loaded in the printer.
• In the case of rolls, paper size is an imagined size set as the printing area for a single page.
Printing Options Using Rolls and Sheets
Printing Method
Rolls
Large-Format Printing
Easily print vertical or horizontal banners from familiar applications such
as Microsoft Ofce applications. Print banners up to 18 m (19.7 yd) long.
Borderless Printing
Print without a margin (border) around posters or photos.
Free Layout (Windows)
Print multiple documents from multiple applications (such as
word-processing programs, spreadsheet programs, and so on) next to
each other.
Free Layout (Macintosh)
Banner Printing
Print pages of a multi-page document consecutively without blank space
between pages.
Important
• If you use an A2 roll for borderless printing, be sure to attach the provided Spacer for Borderless Printing
on the Roll Holder. If you print without attaching it, the Platen may be soiled, which may cause ink to
adhere to the unprinted side of the paper. (→P.144)
88 Basic Printing Workow
Printing procedure
Printing from Windows
Print from the application software menu.
Important
• The Windows printer driver can be used in the following versions of Windows:
• Windows 2000 (Professional or Server)
• Windows XP (Home Edition or Professional)
• Windows Server 2003 (Standard Edition)
• Windows Vista
• We recommend exiting unnecessary applications before printing. Running several applications while
printing may interrupt the transfer of print data and affect printing quality.
1.
In the application software, select Print from the File menu to display the dialog box for printing
conditions.
2.
After conrming that the printer is selected in the dialog box, click Print or OK to start printing.
Note
• The appearance of the dialog box varies depending on the application software. In most cases, the
dialog box includes basic printing options and enables you to choose the printer, specify the range of
pages, number of copies, and so on.
Example: Print dialog box displayed by the application software
Note
• If another printer is selected, select the printer you want to use under Select Printer or in the dialog
box displayed after clicking Printer.
Settings for many printing methods (including enlarged or reduced printing, borderless printing, and so on) are
displayed in the printer driver dialog box. There are two ways to access the printer driver dialog box, as follows:
• From the application software
(→P.497)
• From the operating system menu
(→P.499)
Basic Printing Workow 89
Printing procedure
Printing from Mac OS X
Print from the application menu after registering the printer.
Important
• We recommend exiting unnecessary applications before printing. Running several applications while
printing may interrupt the transfer of print data and affect printing quality.
Registering the printer
Before printing, you must register the printer in Printer Setup Utility (or Print Center ).
For instructions on registering the printer, see “Conguring the Printer Driver Destination (Macintosh)”.
(→P.599)
Important
• During this setup process, the printer will not be listed among available printers if it is off or disconnected.
• By factory default, the AppleTalk protocol is disabled on the printer. You must enable the AppleTalk
protocol before using the printer in an AppleTalk network. For instructions on activating AppleTalk
protocol, see “Conguring the Destination for AppleTalk Network (Macintosh)”. (→P.600)
Note
• When registering the printer, choose USB if the printer is connected via USB, Canon FireWire(iPF) if
connected via IEEE 1394, or AppleTalk, Canon IP(iPF), or Bonjour if connected via a network.
• For Canon IP(iPF) connections, enter the printer’s IP address.
90 Basic Printing Workow
Printing procedure
Printing from the application software
1.
In the application software, select Print from the File menu to display the dialog box for printing
conditions.
Note
• This dialog box includes basic printing options and enables you to choose the printer, specify the
range of pages, number of copies, and so on.
2.
Select the printer in the Printer list.
3.
Click Print to start printing.
As shown in the following illustration, you can switch to other panes in this dialog box to complete settings for
various methods of printing, including enlarged and reduced printing, borderless printing, and so on.
Basic Printing Workow 91
Printing procedure
Printing from Mac OS 9
After selecting the printer in Chooser from the Apple menu, print by using menus in the application software.
Important
• We recommend exiting unnecessary applications before printing. Running several applications while
printing may interrupt the transfer of print data and affect printing quality.
Selecting the printer
Before printing, you must conrm that the printer is selected in Chooser.
For instructions on selecting the printer, see “Conguring the Printer Driver Destination (Macintosh)”. (→P.599)
Important
• During this setup process, the printer will not be listed in Chooser if it is off or disconnected.
• By factory default, the AppleTalk protocol is disabled on the printer. You must enable the AppleTalk
protocol before using the printer in AppleTalk network. For instructions on activating AppleTalk protocol,
see “Conguring the Destination for AppleTalk Network (Macintosh)”. (→P.600)
Note
• In Chooser, choose GARO Printer Driver.
• In Destination, choose USB if the printer is connected via USB, FireWire if connected via IEEE 1394,
or AppleTalk, IP Print, or IP Print (Auto) if connected via network.
• If the printer is connected via AppleTalk, click Active under AppleTalk in the lower-right corner of
the Chooser window.
• If the printer is connected via IP Print, click Registering IP Address under the Destination list to
register the printer’s IP address, and then click IP Print.
92 Basic Printing Workow
Printing procedure
Printing from the application software
1.
In the application software, select Print from the File menu to display the dialog box for printing
conditions.
Note
• This dialog box includes basic printing options for the range of pages, number of copies, and so
on. You can also specify enlargement or reduction, borderless printing, and a variety of other print
settings.
2.
Make sure the printer is selected in the Printer list.
3.
Click Print to start printing.
Basic Printing Workow 93
Printing procedure
Specifying Paper in the Printer Driver (Windows)
If you have replaced the paper, you must complete the following settings in the printer driver.
Important
• Always specify the same type and size of paper in the printer menu and printer driver.
If the type and size do not match, an error message will be displayed and printing is not possible.
1.
2.
3.
Choose Print in the application menu.
4.
5.
In the A Media Type list, select the type of paper that is loaded.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Click the Page Setup tab to display the Page Setup sheet.
94 Basic Printing Workow
Printing procedure
6.
7.
8.
In the A Page Size list, select the size of the original as specied in the application.
In the L Media Source list, select how paper is supplied.
If you have selected Roll Paper in L Media Source, select the width of the loaded roll in M Roll
Paper Width.
Note
• A variety of settings are available in the printer driver to suit different printing applications.
For details on available printing conditions, see “Printer Driver Settings (Windows)”. (→P.465)
Basic Printing Workow 95
Printing procedure
Specifying Paper in the Printer Driver (Mac OS X)
If you have replaced the paper, you must complete the following settings in the printer driver.
1.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the printer in the B Format for list.
7.
In the A Media Type list, select the type of paper that is loaded.
Choose the original size in the C Paper Size list.
Click F OK to close the dialog box.
Choose Print in the application menu.
Access the Main pane.
96 Basic Printing Workow
Printing procedure
8.
9.
10.
Access the Page Setup pane.
In the A Media Source list, select how paper is supplied.
If you have selected Cut Sheet or Manual in A Media Source, make sure the size as selected in
Page Setup is displayed in C Page Size. If you have selected Roll Paper in A Media Source,
make sure the width of the loaded roll is displayed in B Roll Paper Width.
Note
• If the width of the roll loaded in the printer is not shown in B Roll Paper Width, click L Printer
Information on the Main pane to update the printer information.
Note
• A variety of settings are available in the printer driver to suit different printing applications.
For details on available printing conditions, see “Printer Driver Settings (Mac OS X)”. (→P.516)
Basic Printing Workow 97
Printing procedure
Specifying Paper in the Printer Driver (Mac OS 9)
If you have replaced the paper, you must complete the following settings in the printer driver.
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
Choose the original size in the A Page Size list.
7.
In the C Media Type list, select the type of paper that is loaded.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
98 Basic Printing Workow
Printing procedure
8.
9.
10.
Access the Finishing pane.
In the A Media Source list, select how paper is supplied.
If you have selected Roll Paper in A Media Source, make sure the width of the loaded roll is
displayed in B Roll Paper Width.
Note
• If the width of the roll loaded in the printer is not shown in B Roll Paper Width, click L Printer
Information on the Main pane to update the printer information.
Note
• A variety of settings are available in the printer driver to suit different printing applications.
For details on available printing conditions, see “Printer Driver Settings (Mac OS 9)”. (→P.541)
Basic Printing Workow 99
Canceling print jobs
Canceling print jobs
Canceling Print Jobs from the Control Panel
Hold down the Stop/Eject button for a second or more to cancel print jobs or ink drying in progress, and
eject the paper when the printer is online, ofine, or in menu mode.
Printer operation varies depending on the condition when you hold down the Stop/Eject button for a second
or more during printing.
• If you press the Stop/Eject button before printing starts
Holding down for a second or more the Stop/Eject button before printing cancels the print job and
brings the printer online.
If you are using a roll, the paper is fed before the printer goes online.
• If you press the Stop/Eject button during printing
Holding down for a second or more the Stop/Eject button during printing stops printing immediately.
• If you press the Stop/Eject button when printing is paused
Holding down for a second or more the Stop/Eject button when printing is paused cancels the print job
and ejects the paper.
100 Basic Printing Workow
Canceling print jobs
Canceling Print Jobs from Windows
You can cancel print jobs in the printer window.
1.
Click the printer icon in the taskbar to display the printer window.
Note
• You can also display this window by double-clicking the printer icon in the Printers and Faxes (or
Printers ) folder, accessible through the Windows start menu.
2.
Choose Cancel All Documents in the Printer menu to stop the print processing.
To cancel print jobs from the Control Panel, follow these steps.
1.
If the Display Screen of the Control Panel still indicates that the job is in progress and the Data
lamp continues ashing, hold down the Stop/Eject button for a second or more to stop printing.
Do the following if no print jobs are shown in the printer window (because they have already been sent to
the printer).
1.
2.
Double-click the taskbar icon to access the imagePROGRAF Status Monitor.
On the Printer Status sheet, click Cancel Job.
Basic Printing Workow 101
Canceling print jobs
Canceling Print Jobs from Mac OS X
You can cancel print jobs in imagePROGRAF Printmonitor.
1.
2.
Click the printer icon in the Dock to display the printer window.
Click Stop Jobs to stop printing.
In this window, you can cancel jobs sent to the printer.
Note
• The print job is displayed on the printer’s screen during the transmission of print data from the
computer. When the transmission is completed, the job is not displayed even during printing.
3.
Click Utility to display imagePROGRAF Printmonitor.
102 Basic Printing Workow
Canceling print jobs
4.
Select the print job to cancel and click the Cancel Job button to remove the print job.
The job sent to the printer is canceled.
Note
• The print job is displayed on the imagePROGRAF Printmonitor window while the printer receives
the print data from the computer. It is not displayed before transmission of print data to the printer,
even if the computer has started the process of the data.
5.
Exit imagePROGRAF Printmonitor. In the printer window, click Start Jobs.
Important
• Always follow these steps if you cancel print jobs. If you do not restart job processing, the next
job cannot be printed.
To cancel print jobs from the Control Panel, follow these steps.
1.
If the Display Screen of the Control Panel still indicates that the job is in progress and the Data
lamp continues ashing, hold down the Stop/Eject button for a second or more to stop printing.
Basic Printing Workow 103
Canceling print jobs
Canceling Print Jobs from Mac OS 9
How to cancel print jobs varies depending on whether you are printing in the foreground or background.
Canceling background print jobs
1.
Open the Garo Printer Extra folder, which was installed on the hard disk at the same time
as the printer driver.
2.
3.
Open imagePROGRAF Printmonitor.
Choose Pause Printing in the File menu to stop print processing.
The job status changes from Sending to Send.
4.
Select the print job to cancel and click the Cancel Job button to remove the print job.
5.
Choose Resume Printing in the File menu.
Important
• Always follow these steps if you cancel print jobs. If you do not restart the print queue, the next
job cannot be printed.
To cancel print jobs from the Control Panel, follow these steps.
1.
If the Display Screen of the Control Panel still indicates that the job is in progress and the Data
lamp continues ashing, hold down the Stop/Eject button for a second or more to stop printing.
104 Basic Printing Workow
Canceling print jobs
Canceling foreground print jobs
1.
When the progress indicator is displayed, hold down the Command key and press the period
(.) key to cancel print jobs.
2.
If the Display Screen of the Control Panel still indicates that the job is in progress and the Data
lamp continues ashing, hold down the Stop/Eject button for a second or more to stop printing.
Basic Printing Workow 105
Paper
Handling Paper
Paper
Paper
The printer supports the following types of paper.
Paper Type
For information on the types of paper the printer supports, refer to the Paper Reference Guide. (→P.107)
Paper Size
Roll
Sheets
Paper width
203 to 432 mm (8.0 to 17.0 in)
Outer diameter
Up to 150 mm (6 in)
Inner diameter of paper core
2 or 3 inches
Printing surface
Top (outside)
203 × 279 mm to 432 × 1,600 mm
(8.0 × 11.0 in to 17.0 × 63.0 in)
Note
• Paper quality varies among manufacturers. Before buying paper, contact the Canon dealer where you
purchased the printer.
106 Handling Paper
Paper
Types of Paper
For information on the types of paper the printer supports, refer to the Paper Reference Guide . This guide
identies supported plain paper, coated paper, photo paper (such as glossy photo paper), proong paper,
CAD paper, and other types of paper. The Paper Reference Guide identies types and specications of paper,
as well as information on printer driver settings and tips on handling paper.
You can update paper information in the Paper Reference Guide , on the printer Control Panel, and in the
printer driver by downloading the latest version of the Media Conguration Tool from the imagePROGRAF
website.
Note
• The media types with "†" marked in the product name are those specied as genuine Canon media.
For other media, please contact the respective media manufacturer after reading the instruction
manuals supplied with the media.
Viewing the Paper Reference Guide
You can access the Paper Reference Guide as follows. Follow the steps for your particular operating system.
• Windows
1. Double-click the iPFxxxx Support icon on the desktop. (Here, iPFxxxx represents the printer
model.)
The online support window is displayed.
2. Select Paper Reference Guide.
Handling Paper 107
Paper
The Paper Reference Guide is displayed.
• Mac OS X
1. Click the iPF Support icon in the Dock.
The online support window is displayed.
2. Select Paper Reference Guide.
108 Handling Paper
Paper
The Paper Reference Guide is displayed.
• Mac OS 9
1. Double-click the iPFxxxx Paper Reference Guide icon on the desktop. (Here, iPFxxxx represents
the printer model.)
The Paper Reference Guide is displayed.
Handling Paper 109
Paper
Updating paper information
You can update paper information in the Paper Reference Guide and on the printer by downloading the
latest version of the Media Conguration Tool from the imagePROGRAF website. For information about
the Media Conguration Tool, see the Media Conguration Tool Guide (Windows) or Media Conguration
Tool Guide (Macintosh).
Follow these steps to access the imagePROGRAF website.
Important
• When you update paper information by using the Media Conguration Tool, the paper type setting on the
Control Panel, in the printer driver, and in related software is updated.
• Windows
1. Double-click the iPFxxxx Support icon on the desktop. (Here, iPFxxxx represents the printer
model.)
The online support window is displayed.
2. Select Stay Informed.
The default browser is started, and the imagePROGRAF webpage is displayed.
110 Handling Paper
Paper
• Mac OS X
1. Click the iPF Support icon in the Dock.
The online support window is displayed.
2. Select Stay Informed.
The default browser is started, and the imagePROGRAF webpage is displayed.
Note
• In Windows, you can also access the imagePROGRAF webpage by clicking the start menu, selecting
Programs > iPFxxxx Media Conguration Tool (here, iPFxxxx represents the printer model) > iPFxxxx
Media Conguration Tool to start the Media Conguration Tool, and clicking Extra Information.
• On a Macintosh computer, you can also access the imagePROGRAF website from the Finder by
selecting Applications (in Mac OS X or OS 9) > Canon Utilities > iPFxxxx Media Conguration Tool
(here, iPFxxxx represents the printer model) > MCTxxxx to start the Media Conguration Tool and
then clicking Extra Information.
Handling Paper 111
Paper
Paper Sizes
You can use the following sizes of paper.
Sheets
You can use sheets in the following sizes, up to 432 mm (17 in) wide.
ISO A2
420 × 594 mm (16.5 × 23 in)
Feeding from
Cassette
Yes
ISO A2+
432 × 610 mm (17 × 24 in)
No
ISO A3
297 × 420 mm (12 × 17 in)
Yes
ISO A3+
329 × 483 mm (13 × 19 in)
Yes
ISO A4
210 × 297 mm (8 × 12 in)
Yes
ISO B3
353 × 500 mm (14 × 20 in)
No
ISO B4
250 × 353 mm (10 × 14 in)
No
JIS B3
364 × 515 mm (14 × 20 in)
Yes
JIS B4
257 × 364 mm (10 × 14 in)
Yes
17"x22"(ANSI C)
432 × 559 mm (17 × 22 in)
Yes
11"x17" (Ledger)
279 × 432 mm (11 × 17 in)
Yes
13"x19" (Super B)
330 × 483 mm (13 × 19 in)
Yes
Letter (8.5"x11")
216 × 279 mm (8.5 × 11 in)
Yes
Legal (8.5"x14")
216 × 356 mm (8.5 × 14 in)
Yes
12"x18" (ARCH B)
305 × 457 mm (12 × 18 in)
Yes
9"x12" (ARCH A)
229 × 305 mm (9 × 12 in)
No
DIN C3
324 × 458 mm (13 × 18 in)
No
DIN C4
229 × 324 mm (9 × 13 in)
No
14"x17"
355 × 432 mm (14 × 17 in)
Yes
12"x16"
304 × 406 mm (12 × 16 in)
Yes
10"x12"
254 × 305 mm (10 × 12 in)
Yes
10"x15"
254 × 381 mm (10 × 15 in)
Yes
US Photo 16"x20"
406 × 508 mm (16 × 20 in)
Yes
13"x22"
329 × 558 mm (13 × 22 in)
Yes
Poster 300x900mm
300 × 900 mm (12 × 35 in)
No
Custom Media Size
• Tray (top)
No
Paper Size
Dimensions
203 × 279 mm (8 × 11 in) - 432 × 610 mm (17 × 24 in)
• Tray (front)
203 × 520 mm (8 × 21 in) - 432 × 610 mm (17 × 24 in)
112 Handling Paper
Paper
Roll
If the Roll Feed Unit is installed, rolls that meet the conditions below are supported.
• Outer diameter: up to 150 mm (6 in)
• Inner diameter of paper core: 2 or 3 inches
• Printing side out
Roll Paper Width Settings in Printer Driver (*1)
Borderless Printing (*1)
17-in. Roll (432mm)
Yes
ISO A2/A3 Roll (420mm)
Yes (*2)
16-in. Roll (407mm)
Yes
14-in. Roll (356mm)
Yes
A3+ Roll (329mm)
Yes
300mm Roll (300mm)
No
ISO A3/A4 Roll (297mm)
No
JIS B4 Roll (257mm)
Yes
10-in. Roll (254mm)
Yes
8-in. Roll (203mm)
No
*1: For information on types of paper compatible with borderless printing, see the Paper Reference
Guide (→P.107)
*2: Requires the Spacer for Borderless Printing.
Note
• In the printer driver, paper sizes are categorized into groups based on the “size system” such as ISO A
or JIS. In Windows and Mac OS 9, some size systems are not available by default.
• In addition to the preceding sizes, the printer also supports printing on paper in a range of 203×279
mm to 432×610 mm. For details on non-standard paper sizes, see “Printing on Non-Standard Paper
Sizes”. (→P.359)
• Borderless printing is not supported on sheets.
Handling Paper 113
Handling rolls
Handling rolls
Selecting the Roll as the Paper Source
You can switch between manual and auto paper feed methods by pressing the Feeder Selection button.
The Auto Feed lamp is lit when feeding paper automatically, and the Paper Tray lamp is lit when feeding
paper manually.
You must specify auto feed when using rolls. Press the Feeder Selection button to activate the Auto Feed
lamp (a).
Caution
• Paper jams may occur if you load paper other than the paper specied in the paper settings for the
media source.
Note
• You cannot switch the paper source in the following situations:
• If the Message lamp is ashing
Check the message on the Display Screen and take action as necessary. (→P.729)
• If the Data lamp is ashing
Select the paper source after printing is nished.
• If a printer menu operation is in progress
Select the paper source after the operation is nished.
• When in the process of loading paper
Finish loading the paper before selecting the paper source.
• When in the process of replacing Ink Tanks
Finish replacing the Ink Tanks before selecting the paper source.
• If the Top Cover is open
Close the Top Cover before selecting the paper source.
At this point, load the roll. (→P.118)
Note
• If any paper is loaded that will not be used, remove it before loading the roll.
(→P.122)
(→P.172)
• When printing on rolls after printing on sheets, make sure that no printed documents are left on the
Output Tray and that the Vertical Paper Guides are stored out of the way. If you print without checking
this, the Front Tray Guides may become caught inside the Front Paper Feed Slot. (→P.726)
114 Handling Paper
Handling rolls
Loading Rolls on the Roll Paper Holder
Note
• For details on supported sizes and types of the roll that can be loaded, see Paper Sizes (→P.112) or
the Paper Reference Guide. (→P.107)
• Align the edges of the paper on both ends of the roll.
• If the edge of the roll is bent or soiled, use the Paper Cutting operation of the printer to cut the edge of
the paper manually. (→P.130)
• If the paper is badly creased or bent, cut the edge of the roll with scissors before loading the roll in
the printer, and then cut the edge of the paper manually using the Paper Cutting operation of the
printer. (→P.130)
• To load a roll with a 3-inch paper core, insert the 3-Inch Paper Core Attachment on the roll holder and
attach the 3-Inch Paper Core Holder Stopper. (→P.144)
• If you use a roll A2 or larger for Borderless Printing, insert the provided Spacer for Borderless
Printing on the Roll Holder.
Follow the steps 3 and 4 below.
1.
Remove the Holder Stopper from the Roll Holder.
2.
With the Roll Holder sideways and the edge of the roll paper facing forward as shown, insert
the roll in the Roll Holder from the left. Insert the roll rmly until it touches the ange (a) of
the Roll Holder.
Handling Paper 115
Handling rolls
Important
• Always put the Roll Holder sideways when loading rolls. If you accidentally load a roll when the Roll
Holder is upright, it may damage the Roll Holder.
• Set the roll on a table or other at surface so that it does not roll or fall. Rolls are heavy, and dropping
a roll may cause injury.
3.
Insert the Holder Stopper from the left in the Roll Holder as shown, pushing it rmly in until the
ange (a) of the Holder Stopper touches the roll.
Important
• Insert the roll rmly until it touches the Holder Stopper. If it does not touch the stopper, feeding
problems may occur.
116 Handling Paper
Handling rolls
Removing Rolls From the Roll Holder
1.
Remove the Holder Stopper from the Roll Holder.
2.
Remove the roll from the Roll Holder.
Important
• After removal, store the roll in the original bag or box, away from high temperature, humidity, and
direct sunlight. If paper is not stored properly, the printing surface may become scratched, which
may affect the printing quality when you use it again.
Note
• How to remove the 3-Inch Paper Core Attachment : (→P.144)
• How to remove the Spacer for Borderless Printing : (→P.144)
Handling Paper 117
Handling rolls
Loading Rolls in the Roll Feed Unit
1.
Push in the Output Tray Extension.
2.
Insert your ngers under the Vertical Paper Guides on the Output Tray at the positions shown
(a) and lift the guides.
3.
Open the Roll Paper Unit Cover with one hand, as shown.
118 Handling Paper
Handling rolls
4.
With the edge of the roll paper facing up toward you, insert the Roll Holder shaft into the guide
grooves (a) of the Roll Holder Slot on both sides. Make sure that the colors of the Roll Holder
shaft ends (b) and the guide grooves match.
Caution
• Be careful not to pinch your ngers between the guide grooves (a) and the Roll Holder shaft
(b) when loading rolls.
Note
• If it is difcult to load rolls from the front, load them from behind the printer.
Handling Paper 119
Handling rolls
5.
Insert the edge of the roll paper into the Paper Feed Slot (a) and feed it manually until you
hear the paper feed tone.
Important
• Be careful not to soil the printing surface of roll paper as you pull it out. This may affect the printing
quality. We recommend wearing clean cloth gloves when handling rolls to protect the printing surface.
• If the paper is wrinkled or warped, straighten it out before loading it.
• Load paper straight so it is not fed askew.
The printer now starts advancing the paper.
120 Handling Paper
Handling rolls
6.
Specify the type and length of the paper.
How the printer operates after the paper is fed varies depending on the setting for automatic
detection of the remaining roll paper, as well as the barcode printed on rolls.
Automatic Detection of the
Remaining Roll Paper
On
Off
Barcodes
Printer Operation After the Paper is Fed
Printed
The type and amount of paper left is automatically
detected based on the barcode printed on the roll.
There is no need to specify the type and length of
the paper.
Not printed
You must specify the type and length of the paper.
A menu for selection of the paper type and length is
automatically shown on the Display Screen .
(→P.124)
(→P.125)
Printed
You must specify the type of paper.
(→P.124)
Not printed
7.
Close the Roll Paper Unit Cover with one hand, as shown.
8.
If the edge of the roll is bent or soiled, cut the edge of the paper.
1. Press the Online button to bring the printer ofine.
2. After conrming Ofine / FeedPaper ↑↓, press ▲ or ▼ to feed the roll paper to the position for cutting.
3. Select Yes in Paper Cut on Printer Menu, and then press the OK button. (→P.130)
Handling Paper 121
Handling rolls
Removing Roll from the Roll Feed Unit
Important
• When a roll has been advanced, do not pull it out by force. This will prevent the paper from being
advanced.
If you accidentally pull out the paper, hold down the Stop/Eject button to enable feeding.
1.
Push in the Output Tray Extension.
2.
Open the Roll Paper Unit Cover with one hand, as shown.
3.
Hold down the Stop/Eject button for a second or more to rewind the roll.
4.
Using both hands, rotate the Roll Holder toward the back to rewind the roll.
122 Handling Paper
Handling rolls
5.
Remove the Roll Holder from the Roll Holder Slot.
6.
Close the Roll Paper Unit Cover.
Handling Paper 123
Handling rolls
Selecting the Paper Type (Roll)
When changing the type of paper after the paper has been advanced, specify the type of paper as follows.
Note
• After you load the roll, the printer automatically shows a menu for selection of the paper type on the
Display Screen, unless a barcode has been printed on the roll or you have activated automatic detection
of the remaining roll paper.
• Select the paper length, unless a barcode has been printed on the roll and you have deactivated the
automatic detection function of the remaining roll paper. (→P.125)
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Paper Settings, and then press ▼.
MAIN MENU
Paper Settings ↓
3.
Press ◄ or ► to select Roll Media Type, and then press ▼.
Paper Settings
Roll Media Type ↓
4.
Press ◄ or ► to select the paper type, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Roll Media Type
= Plain Paper
Note
• For details on paper types, see the Paper Reference Guide. (→P.107) By factory default, Plain
Paper is selected.
• Be sure to select the correct paper type. If this setting does not match the loaded paper, it may
cause feed errors and affect the printing quality.
5.
Press the Online button to bring the printer online.
124 Handling Paper
Handling rolls
Specifying the Paper Length (Roll)
When changing the length of paper after the paper has been advanced, specify the length as follows.
Note
• When you specify the roll length in the printer menu, Chk Remain.Roll must be set to On. If it is
Off, the Roll Length Set menu is not shown.
• After you load a roll and specify the roll type, the printer automatically shows a menu for selection of
the roll length on the Display Screen if no barcode has been printed on the roll and you have activated
automatic detection of the remaining roll paper. In this case, follow step 4. The printer will automatically
go online.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Paper Settings, and then press ▼.
MAIN MENU
Paper Settings ↓
3.
Press ◄ or ► to select Roll Length Set, and then press ▼.
Paper Settings
Roll Length Set ↓
4.
Press ◄ or ► to select the paper length, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Roll Length Set
=30.0 m
5.
Press the Online button to bring the printer online.
Handling Paper 125
Handling rolls
Feeding Roll Paper Manually
When the printer is ofine and roll paper is selected as the paper source, you can feed or retract the roll
paper by pressing ▲ or ▼.
Press ▲ to retract the roll paper manually.
Press ▼ to feed the roll paper manually.
If you hold down ▲ or ▼ for less than a second, the roll paper will move about 1 mm (0.04 in).
If you hold down ▲ or ▼ for more than a second, the paper will move until you release the button. Release
the button if Feed Limit.. is shown on the Display Screen.
126 Handling Paper
Handling rolls
Detection of the Remaining Roll Paper
If you have activated automatic detection of the remaining roll paper, when the roll is ejected, a barcode with text is
printed on the roll paper that identies the type of paper and amount left. If this function is activated and barcodes
are printed on the roll paper, the type of paper and amount left are automatically detected when you load a
roll. The barcode will be cut off after it has been read.
Note
• If the document is not cut but kept in the printer, only the text message is printed. This is also the
case when printing on 8-inch rolls or clear lm.
Important
• If the barcode on the roll is not detected, enter the type and length of paper on the Control Panel.
Follow these steps to activate detection of the remaining roll paper.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Paper Settings, and then press the ▼ button.
MAIN MENU
Paper Settings ↓
3.
Press ◄ or ► to select Chk Remain.Roll, and then press the ▼ button.
Paper Settings
Chk Remain.Roll ↓
4.
Press ◄ or ► to select the On, and then press the OK button.
Chk Remain.Roll
On
The setting is updated, and an equals sign “=” is displayed at left.
Chk Remain.Roll
= On
5.
Press the Online button to bring the printer online.
Handling Paper 127
Handling rolls
Cutting the Leading Edge of Roll Paper Automatically
If the leading edge of a roll is crooked or warped, it may cause an error message or printing problems. In this
case, set Trim Edge First to Automatic or On on the Control Panel to have the printer cut the leading edge to
make the edge straight after you load a roll.
Trim Edge First offers the following options.
• Automatic
If the left and right side of the leading edge of the roll ((a) and (b)) are uneven by 3 mm (0.12 in) or more
when you load the roll, the edge is cut an amount relative to the slant to ensure a straight edge, and
scraps are removed. The edge is not cut if the unevenness is less than 3 mm.
• Off
The edge is not cut and scraps are not removed. This setting is Off for most types of paper, by default.
For more information, see the Paper Reference Guide. (→P.107)
• On
The leading edge is cut off when you load a roll, and scraps are removed. The amount of paper cut
off from the leading edge varies depending on the paper type. For more information, see the Paper
Reference Guide. (→P.107)
Note
• If you print on paper that has an irregular width, set Skew Check Lv. to Loose for a higher skew
detection threshold or to Off to disable skew detection. However, if paper is loaded askew when
detection is Off, note that paper jams or Platen soiling may occur.
Follow these steps to change the Trim Edge First setting.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Med.Detail Set., and then press ▼.
MAIN MENU
Med.Detail Set. ↓
128 Handling Paper
Handling rolls
3.
Press ◄ or ► to select the type of paper, and then press the ▼ button.
Med.Detail Set.
= Plain Paper ↓
4.
Press ◄ or ► to select Trim Edge First, and then press the ▼ button.
Plain Paper
Trim Edge First ↓
5.
Press ◄ or ► to select the desired setting option, and then press the OK button.
Trim Edge First
On
The setting is updated, and an equals sign “=” is displayed at left.
Trim Edge First
= On
6.
Press the Online button to bring the printer online.
Handling Paper 129
Handling rolls
Specifying the Cutting Method for Rolls
How a roll is cut after ejection varies depending on the printer settings.
Cutting Method
Automatic
Rolls are automatically cut by the Cutter
Unit .
Eject
(→P.131)
Menu Settings
Cutting
Mode
Driver Setting
Automatic Auto
Cut
Yes
Choose this setting if you prefer not to
have documents dropped immediately after
printing, as when waiting for ink to dry.
To cut the roll paper using the Cutter Unit
, hold down the Stop/Eject button for a
second or more.
Eject
Yes
Manual
(→P.132)
Choose this setting when using paper or
media that cannot be cut using the Cutter
Unit .
Cut each page from the roll using scissors.
For continuous printing (if you will cut each
page later), in Auto Cut , select Yes , or
select Print Cut Guideline .
(→P.447)
Manual
No Yes
Print Cut
Guideline
Paper
Cutting
(→P.133)
Choose this option if you want to cut pages Paper Cut
by pressing Cutter Unit buttons for manual
cutting after printing when the printer driver
is congured to Auto Cut > No or Print Cut
Guideline .
Otherwise choose this option if you want to
cut the roll edge after loading a roll.
Yes
No Print Cut
Guideline
Note
• Automatic and Eject are valid only when you have specied Auto Cut > Yes in the printer driver.
• With Eject, printing does not resume after a series of jobs have been printed continuously until the
roll is cut.
Cut roll paper manually in the following cases:
130 Handling Paper
Handling rolls
Eject (waiting for ink to dry after printing)
1.
Select Eject as the Cutting Mode in the printer menu, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Cutting Mode
= Eject
2.
Starts printing.
Roll paper is fed to the specied cut position and then automatically stopped.
3.
To cut the roll paper, hold down the Stop/Eject button for a second or more.
Handling Paper 131
Handling rolls
Manual (when using paper or media that cannot be cut using the
Cutter Unit )
1.
Select Manual as the Cutting Mode in the printer menu, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Cutting Mode
= Manual
2.
Starts printing.
Complete the print settings.
3.
Press the Online button.
Roll paper is fed to the specied cut position and then automatically stopped.
4.
Use scissors to cut the roll paper along the cut line.
5.
Press the Online button.
After the roll is rewound, it stops automatically.
132 Handling Paper
Handling rolls
Paper Cutting (to have the roll cut at your specied position)
1.
If the printer stops operating after printing, press the Online button.
The printer goes ofine, and the following screen is displayed.
Ofine
FeedPaper ↑↓
2.
Press ▲ or ▼ to feed the roll paper to the position for cutting.
3.
Select Yes as the Paper Cut in the printer menu, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Paper Cut
= Yes
After the roll paper is cut, it is rewound automatically.
Caution
• If paper would be short when cut at a particular position, the roll may automatically be advanced in
some cases before cutting.
Handling Paper 133
Handling rolls
Reducing Dust from Cutting Rolls
The printer is equipped with a function to reduce cutting dust for media such as Backlit Film that are more likely to
generate debris when cut. This may improve printing quality and help prevent Printhead damage. You can set up
this function to be activated for some types of paper.
When this function is activated, black lines are printed at the leading and trailing edges of documents.
Important
• Do not activate the function to reduce cutting dust for paper that wrinkles easily, such as Plain Paper or
lightweight paper. This may impair cutting and cause paper jams.
• Borderless printing is not available when this function is activated. Deactivate this function before
borderless printing.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Med.Detail Set., and then press ▼.
MAIN MENU
Med.Detail Set. ↓
3.
Press ◄ or ► to select the type of paper, and then press ▼.
Med.Detail Set.
Backlit Film ↓
4.
Press ◄ or ► to select CutDustReduct., and then press ▼.
Backlit Film
CutDustReduct. ↓
5.
Press ◄ or ► to select On, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
CutDustReduct.
= On
The function to reduce cutting dust is now activated.
134 Handling Paper
Handling rolls
Specifying the Ink Drying Time for Rolls
When you are using paper that takes longer for ink to adhere, if the Cutter touches printed surfaces that are still
wet, it may damage the paper or cause rough cut edges. Also, ink may be transferred onto the paper surface during
ejection, soiling it. You can prevent problems by adjusting the drying time after printing before the paper is cut.
Windows
1.
Display the printer driver dialog box.
(→P.499)
2.
Select the Main sheet and click C Advanced Settings in A Media Type.
3.
In the Media Detailed Settings dialog box displayed next, select C Between Pages and D
Between Scans in B Drying Time, and then click OK.
(→P.151)
Handling Paper 135
Handling rolls
Mac OS X
1.
2.
Choose Print in the application menu.
3.
In the Media Detailed Settings dialog box displayed next, select C Between Pages and D
Select the Main pane and click C Settings in A Media Type.
Between Scans in B Drying Time, and then click OK.
(→P.152)
136 Handling Paper
Handling rolls
Mac OS 9
1.
2.
Choose Print in the application menu.
3.
In the Media Detailed Settings dialog box displayed next, select C Between Pages and D
Select the Main pane and click D Settings in A Media Type.
Between Scans in B Drying Time, and then click OK.
(→P.153)
Note
• By factory default, Drying Time is deactivated ( Off ) for all paper types.
• To have the printer wait for ink to dry immediately after printing without releasing paper, set Cutting
Mode to Eject in the printer menu.
(→P.130)
Handling Paper 137
Handling rolls
Clearing Jammed Roll Paper
If paper from a roll becomes jammed, Paper Jam / Press ↑ Key is shown on the Display Screen of the
Control Panel. Remove the jammed paper as follows.
Note
• For instructions on removing a paper jam from a roll if the scrap of paper remains in the Paper Feed
Slot, see “Clearing Jammed Paper (Paper Feed Slot)”. (→P.142)
1.
Open the Roll Paper Unit Cover. Use a store-bought cutter or the like to cut the paper of the
loaded roll.
Caution
• When cutting paper, be careful to avoid scratching the printer.
2.
Press ▲ button.
138 Handling Paper
Handling rolls
3.
Remove the jammed paper.
• If paper is jammed inside the Top Cover
1. Open the Top Cover and move the Carriage to the side.
2. Clear any jammed paper from inside the Top Cover.
After removing the paper, make sure there are no other scraps of paper in the printer.
3. Close the Top Cover.
Important
• Do not touch the Linear Scale (a) or Carriage Shaft (b).
Handling Paper 139
Handling rolls
• If paper from a roll is jammed by the Paper Feed Slot
1. Open the Roll Paper Unit Cover.
2. Remove the jammed paper from the Paper Feed Slot.
After removing the paper, make sure there are no other scraps of paper in the printer. If paper
is jammed deep in the Paper Feed Slot (→P.141), remove the Roll Feed Unit and clear the
paper jam.
• If the paper is jammed by the Output Tray
Remove the jammed paper from the Output Tray.
After removing the paper, make sure there are no other scraps of paper in the printer.
4.
Press ▼.
140 Handling Paper
Handling rolls
If paper is jammed deep in the Paper Feed Slot, remove the Roll Feed Unit and clear the paper jam as follows.
1.
2.
Turn off the printer and remove the Roll Feed Unit from the printer. (→P.147)
Remove the jammed paper from the Paper Feed Slot.
After removing the paper, make sure there are no other scraps of paper in the printer.
3.
Install the Roll Feed Unit on the printer again. (→P.148)
Handling Paper 141
Handling rolls
Clearing Jammed Paper (Paper Feed Slot)
Follow these steps to remove any scraps left in the Paper Feed Slot after you clear jammed sheets or
roll paper.
1.
2.
Press the Feeder Selection button to activate the Paper Tray lamp.
Press ◄ or ► to select POP Board, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Manual Pap.Type
= POP Board
3.
Press ◄ or ► to select ISO A2, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Manual Pap.Size
= ISO A2
A conrmation message is displayed notifying you that the printer is changing the media source.
Please Wait..
4.
After the following message is displayed, press the OK button.
Chk Back Space
Press OK
5.
After the following message is displayed, open the Top Cover.
Open UpperCover
6.
Fold an A4 sheet lengthwise four times and insert it through the gap of the Back Cover. Push the
scrap out toward the Platen.
7.
8.
9.
10.
Remove the scrap when it is pushed out onto the Platen.
If any scraps remain inside the Paper Feed Slot, repeat steps 6 and 7.
Close the Top Cover.
Turn the printer off. (→P.20)
142 Handling Paper
Handling rolls
Roll Holder Set
A set of parts including a Roll Holder, Holder Stopper (for 2- and 3-inch paper cores), 3-Inch Paper Core
Attachment, and Spacer for Borderless Printing (used for both 2- and 3-inch paper cores).
To load a roll with a 3-inch paper core, insert the 3-Inch Paper Core Attachment on the Roll Holder and attach
the Holder Stopper for 3-inch paper cores. If you use an A2 (420 mm [16.5 in]) roll for borderless printing,
insert the Spacer for Borderless Printing on the Roll Holder.
• Roll Holder Set RH2-11
• Roll Holder
• Holder Stopper (for 2- and 3-inch paper cores (a) and (b))
• 3-Inch Paper Core Attachment
• Spacer for Borderless Printing
For instructions on installing these parts, see “Attaching Accessories to the Roll Holder”. (→P.144)
Handling Paper 143
Handling rolls
Attaching Accessories to the Roll Holder
Mounting the 3-Inch Paper Core Attachment
To load a roll with a 3-inch paper core, insert the 3-Inch Paper Core Attachment on the Roll Holder.
Align the triangular part (b) of the 3-Inch Paper Core Attachment (a) with the triangular groove (c) of the Roll
Holder as shown, and insert the 3-Inch Paper Core Attachment into the Roll Holder.
Use the Holder Stopper for 3-inch paper cores.
Removing the 3-Inch Paper Core Attachment
Spread the tips (b) of the 3-Inch Paper Core Attachment that protrude by the triangular label (a) of the Roll
Holder as shown, and remove the 3-Inch Paper Core Attachment.
144 Handling Paper
Handling rolls
Attaching the Spacer for Borderless Printing
If you use an A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the Roll
Holder.
Insert the protrusions (b) of the Spacer for Borderless Printing (a) into the holes (c) of the Roll Holder, as
shown.
Removing the Spacer for Borderless Printing
Pull out the Spacer for Borderless Printing from the Roll Holder, as shown.
Handling Paper 145
Handling rolls
Feeding Paper from the Roll Feed Unit
The Paper Feed Slot used to feed roll paper is the same as the Paper Feed Slot used by the Tray, so both
methods of feeding paper cannot be used at the same time.
Thus, if a roll has been advanced when you wish to print from the Top Paper Feed Slot or Front Paper Feed
Slot, change the paper source.
1.
2.
Select the tray as the paper source. (→P.155)
After Remove RllMedia? is displayed, press the OK button.
The roll is rewound automatically.
Similarly, if a sheet is in the Top Paper Feed Slot or Front Paper Feed Slot when you wish to print on a
roll, you will need to remove the sheet from the slot and reinsert the roll paper (which has been rewound)
in the Paper Feed Slot.
1.
2.
Select the roll as the paper source. (→P.114)
After Remove CutSheet? is displayed, press the OK button.
The sheet is ejected automatically.
146 Handling Paper
Handling rolls
Removing the Roll Feed Unit
Important
• Always make sure the printer is off before removing the Roll Feed Unit.
1.
2.
Remove any rolls in the Roll Feed Unit. (→P.122)
Use a coin to loosen the screws on both sides of the back of the Roll Feed Unit (a) and remove
the unit from the printer.
3.
Hold the Roll Feed Unit by the Carrying handles (a) as you remove the Roll Feed Unit from
the printer.
Handling Paper 147
Handling rolls
Installing the Roll Feed Unit
1.
Holding the Roll Feed Unit by the Carrying handles (a), insert the two pins of the Roll Feed Unit
(b) into the each hole on the back of the printer (c).
2.
Use a coin to tighten the two screws on the back of the Roll Feed Unit (a) to secure it to the printer.
148 Handling Paper
Handling rolls
Accessing the Printer Driver Dialog Box from the
Operating System Menu (Windows)
1.
2.
Click start > Printers and Faxes (or Printers ).
3.
Click Printing Preferences to display the Printing Preferences dialog box, titled with the
Select the printer, and then display the printer properties dialog box.
name of this printer.
Note
• The Device Settings sheet is also an extension of the printer driver. (→P.486)
Handling Paper 149
Handling rolls
Six sheets of print settings are displayed by the printer driver: Main, Page Setup, Layout,
Favorites, Utility, and Support.
Important
• If you access the printer driver dialog box from the operating system menu, changes you make to the
settings will apply to all applications you use for printing.
• You can also access the printer driver dialog box from applications.
see “Accessing the Printer Driver Dialog Box from Applications (Windows)”. (→P.497)
150 Handling Paper
Handling rolls
Media Detailed Settings Dialog Box (Windows)
The Media Detailed Settings dialog box offers the following settings. For details on settings items, refer to
the printer driver help.
Note
• To display the Media Detailed Settings dialog box, on the Main Sheet (Windows) (→P.474) , click
Settings by Media Type.
Setting Item
Description
A Media Type
Select the paper type.
For information on the types of paper the printer supports, refer to the Paper
Reference Guide . (→P.107)
B Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Drying
Time setting is only valid for rolls.
(→P.135)
C Between Pages
Specify the time the printer waits after printing a page until ejecting the
paper, as needed.
D Between Scans
Specify the time the printer waits after printing a line on the page until
printing the next line, as needed.
E Roll Paper Margin for
Safety
F Near End Margin
You can specify the length of a margin on the leading edge of paper to
ensure that paper susceptible to curling is held rmly against the Platen .
Specify the length of the Near End Margin (the leading edge margin) of the
roll, as needed.
G Cut Speed
Select the speed of automatic cutting, as needed. You can adjust this setting
if paper is not cut well when automatic cutting is used.
H Calibration Value
You can specify whether to apply the results of calibration performed on the
printer to image processing.
I Mirror
Specify whether to print a mirror image, as needed. Select this option to print
a version of the document or image with the left and right sides inverted.
Handling Paper 151
Handling rolls
Media Detailed Settings Dialog Box (Mac OS X)
The Media Detailed Settings dialog box offers the following settings. For details on settings items, refer to
the printer driver help.
Note
• To display the Media Detailed Settings dialog box, on the Main Pane (Mac OS X) (→P.523) , click
Settings by Media Type.
Setting Item
Description
A Media Type
Select the paper type.
For information on the types of paper the printer supports, refer to the Paper
Reference Guide . (→P.107)
B Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Drying
Time setting is only valid for rolls.
(→P.135)
C Between Pages
Specify the time the printer waits after printing a page until ejecting the
paper, as needed.
D Between Scans
Specify the time the printer waits after printing a line on the page until
printing the next line, as needed.
E Roll Paper Margin for
Safety
F Near End Margin
You can specify the length of a margin on the leading edge of paper to
ensure that paper susceptible to curling is held rmly against the Platen .
Specify the length of the Near End Margin (the leading edge margin) of the
roll, as needed.
G Cut Speed
Select the speed of automatic cutting, as needed. You can adjust this setting
if paper is not cut well when automatic cutting is used.
H Automatic Cutting
You can activate or deactivate Automatic Cutting and printing of cut lines,
as desired. In this list, specify Yes , No, or Print Cut Guideline .
I Calibration Value
You can specify whether to apply the results of calibration performed on the
printer to image processing.
J Mirror
Specify whether to print a mirror image, as needed. Select this option to print
a version of the document or image with the left and right sides inverted.
152 Handling Paper
Handling rolls
Media Detailed Settings Dialog Box (Mac OS 9)
The Media Detailed Settings dialog box offers the following settings. For details on settings items, refer to
the printer driver help.
Note
• To display the Media Detailed Settings dialog box, on the Main Pane (Mac OS 9) (→P.545) , click
Settings by Media Type.
Setting Item
Description
A Media Type
Select the paper type.
For information on the types of paper the printer supports, refer to the Paper
Reference Guide . (→P.107)
B Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Drying
Time setting is only valid for rolls.
(→P.135)
C Between Pages
Specify the time the printer waits after printing a page until ejecting the
paper, as needed.
D Between Scans
Specify the time the printer waits after printing a line on the page until
printing the next line, as needed.
E Roll Paper Margin for
Safety
F Near End Margin
You can specify the length of a margin on the leading edge of paper to
ensure that paper susceptible to curling is held rmly against the Platen .
Specify the length of the Near End Margin (the leading edge margin) of the
roll, as needed.
G Cut Speed
Select the speed of automatic cutting, as needed. Adjust this setting if paper
is not cut well when automatic cutting is used.
H Automatic Cutting
You can activate or deactivate Automatic Cutting and printing of cut lines,
as desired. In this list, you can specify Yes or No and Print Cut Guideline .
I Mirror
Specify whether to print a mirror image, as needed. Select this option to print
a version of the document or image with the left and right sides inverted.
Handling Paper 153
Handling sheets
Handling sheets
Selecting the Cassette as the Paper Source
You can switch between manual and auto paper feed methods by pressing the Feeder Selection button.
The Auto Feed lamp is lit when feeding paper automatically, and the Paper Tray lamp is lit when feeding
paper manually.
You must specify auto feed when using paper from the Cassette. Press the Feeder Selection button to
activate the Auto Feed lamp (a).
Note
• You cannot switch the paper source in the following situations:
• If the Message lamp is ashing
Check the message on the Display Screen and take action as necessary. (→P.729)
• If the Data lamp is ashing
Select the paper source after printing is nished.
• If a printer menu operation is in progress
Select the paper source after the operation is nished.
154 Handling Paper
Handling sheets
Selecting the Tray as the Paper Source
You can switch between manual and auto paper feed methods by pressing the Feeder Selection button.
The Auto Feed lamp is lit when feeding paper automatically, and the Paper Tray lamp is lit when feeding
paper manually.
When loading paper in the tray, you must specify manual feed. Press Feeder Selection to activate the
Paper Tray lamp (a).
Caution
• Paper jams may occur if you load paper other than the paper specied in the paper settings for the
media source. If you insert the edge of a roll in the Paper Feed Slot after you have selected sheets as
the type of paper in the media source on the Control Panel and specied the type and size of paper,
the printer will prepare to print on the roll. If you print under these conditions, an error will occur when
the roll is ejected. (→P.747)
Note
• You cannot switch the paper source in the following situations:
• If the Message lamp is ashing
Check the message on the Display Screen and take action as necessary. (→P.729)
• If the Data lamp is ashing
Select the paper source after printing is nished.
• If a printer menu operation is in progress
Select the paper source after the operation is nished.
After the Paper Tray lamp is lit, the printer automatically shows a menu for selection of the paper type on the
Display Screen.
And then specify the paper type. (→P.168)
Handling Paper 155
Handling sheets
Loading Sheets in the Cassette
Note
•
•
•
•
•
Load the paper, making sure not to exceed the Maximum Capacity Line of the Cassette. (→P.19)
For details on the paper capacity, see Specications (→P.72) or the Paper Reference Guide. (→P.107)
Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.
Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.
Load the paper straight. Loading paper skewed will cause an error.
1.
Push in the Output Tray Extension.
2.
Grasp the handle (a) on the front of the Cassette and pull it forward a little. Holding the Cassette
on both sides with both hands, remove the cassette.
Caution
• When removing the Cassette, do not drag it on the table. This may damage the table.
156 Handling Paper
Handling sheets
3.
Fan the stack before loading. Load the stack printing-side down and aligned lengthwise against
the far right corner of the Cassette.
4.
Squeeze the Guide Lever of the Width Guide (a) and slide it to the right until it touches the
edge of the paper lightly.
5.
Similarly, squeeze the Guide Lever of the Length Guide (b) and slide it back until it touches the
edge of the paper lightly.
Important
• Do not set the Width Guide and Length Guide away from the paper or too tight against it. This
may cause feeding problems.
6.
Holding the Cassette in the middle on both sides with both hands, insert it rmly into the printer.
Caution
• When removing the Cassette, do not drag it on the table. This may damage the table.
Handling Paper 157
Handling sheets
7.
Pull out the Output Tray Extension.
Note
• When changing the type or size of paper, select the new type or size in the menu on the Control Panel.
• Selecting the Paper Type (Cassette) (→P.167)
• Selecting the Paper Size (Cassette) (→P.170)
158 Handling Paper
Handling sheets
Loading Sheets Manually
When using the tray, load the paper in the Top Paper Feed Slot. (→P.159) However, if you have specied
POP Board, insert the sheet in the Front Paper Feed Slot. (→P.162)
Loading paper in the Top Paper Feed Slot
Note
• You can load only one sheet in the Top Paper Feed Slot. Do not load more than one sheet at a time.
This may cause paper jams.
•
•
•
•
Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.
Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.
Load the paper straight. Loading paper askew will cause an error.
Before feeding paper or printing, make sure the sheet is at against the Paper Tray Cover . The sheet
may jam if it curls before feeding or printing and the trailing edge drops toward the front.
• If a roll is loaded, rewind the roll before this procedure. (→P.146)
1.
If you send a print job specifying a paper other than POP Board from a computer beforehand,
the type and size of paper are shown on the Display Screen.
Note
• If you will load paper before sending a print job, press the Feeder Selection button to illuminate the
Paper Tray lamp. A screen is displayed for selection of the paper type. Press ◄ or ► to select the
paper type, and then press the OK button. Next, a screen is displayed for selection of the paper size.
Press ◄ or ► to select the size of paper, and then press the OK button.
• For details on paper types, see the Paper Reference Guide. (→P.107) By factory default, Plain
Paper is selected.
• Be sure to select the correct paper type. If this setting does not match the loaded paper, it may
cause feed errors and affect the printing quality.
2.
Open the Paper Tray Cover.
Handling Paper 159
Handling sheets
3.
Slide the Width Guide (a) to align it with the mark for the size of paper you will load.
4.
Load the paper in the Tray with the printing side face-up.
Insert the paper until its edge touches the far end of the tray lightly.
5.
Move the Width Guide (a) to match the size of paper loaded.
Set the Width Guide against the edge of the paper to prevent the paper from becoming crooked
or wrinkled.
160 Handling Paper
Handling sheets
6.
Press the OK button to start feeding the paper.
Load Top Tray
Press OK
After the paper is advanced and the printer goes online, printing starts automatically.
If no print job was received beforehand, the printer enters Standby mode.
7.
Pull out the Output Tray Extension.
Note
• When printing from the Top Paper Feed Slot, always make sure the Vertical Paper Guides are stored out
of the way. If the Vertical Paper Guides are up and a printed document is left in the Output Tray, the
Front Tray Guides may become caught inside the Front Paper Feed Slot. (→P.726)
Handling Paper 161
Handling sheets
Loading heavyweight paper in the Front Paper Feed Slot
Important
• Before loading heavyweight paper, change the media type setting to POP Board. When POP Board is
selected as the type of paper, Front Paper Feed Slot is automatically selected.
• Always load a POP Board in the Front Paper Feed Slot. Loading it another way may damage the
printer or cause malfunction.
Note
•
•
•
•
•
1.
You can load only one sheet of paper at a time.
Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.
If the paper is warped, straighten it before loading it.
Load the paper straight. Loading paper askew will cause an error.
After loading the paper, you cannot move it laterally to reposition it. Be sure to load the paper straight.
If you send a print job specifying POP Board from a computer beforehand, the type and size
of paper are shown on the Display Screen.
Note
• If you will load paper before sending a print job, press the Feeder Selection button to illuminate the
Paper Tray lamp. A screen is displayed for selection of the paper type. Press ◄ or ► to select the
paper type, and then press the OK button. Next, a screen is displayed for selection of the paper size.
Press ◄ or ► to select the size of paper, and then press the OK button.
• For details on types of paper, see the Paper Reference Guide. (→P.107) By factory default, Plain
Paper is selected.
• Be sure to select the correct paper type. If this setting does not match the type of paper loaded, it
may cause feed errors and affect the printing quality.
2.
Check the space behind the printer when the following message is displayed, and then press
the OK button.
Chk Back Space
Press OK
Note
• Sufcient space behind the printer is required when loading paper in the Front Paper Feed Slot. For
details on the space required for installation, see “Specications”. (→P.72)
162 Handling Paper
Handling sheets
3.
Push the knob (a) of the Vertical Paper Guides back to lift the Vertical Paper Guides.
4.
After the following message is displayed, open the Top Cover.
Open UpperCover
Handling Paper 163
Handling sheets
5.
When the following message is displayed, place the paper printing-side up on the Vertical Paper
Guides and insert the paper in the Front Paper Feed Slot keeping it at against the Vertical
Paper Guides.
Load Front Tray
Load Paper
164 Handling Paper
Handling sheets
6.
As you look in the Top Cover, align the right edge of the paper with the left edge of the Paper
Alignment Line (a) on the Platen. Insert the leading edge of the paper between the Platen and
Paper Retainer (b), keeping it parallel to the Paper Retainer (b), and align the paper with the
Paper Alignment Line (c) of the Output Tray.
Important
• Never touch the Linear Scale (a) or Carriage Shaft (b). This may stain your hands and damage
the printer.
Handling Paper 165
Handling sheets
7.
After the following message is displayed, close the Top Cover.
Close UpperCover
8.
After the following message is displayed, press the OK button.
Load Front Tray
Press OK
The paper is held between the Platen and Back Cover as it is fed.
Ofine
Loading..
After the paper is advanced, the printer automatically goes online and starts printing.
If no print job has been received from the computer beforehand, the printer enters Standby mode.
9.
10.
Pull out the Output Tray Extension.
After printing, the printer will temporarily stop advancing the paper while the trailing edge is still in
the rollers to prevent the sheet from dropping. Press the ▲ button to release the sheet. After
pulling it straight out, press the ▼ button. (→P.196)
Note
• Remove the printed document on the Output Tray after printing from the Front Paper Feed Slot. If
you print while a document is still there, the Front Tray Guides may become caught inside the Front
Paper Feed Slot. (→P.726)
166 Handling Paper
Handling sheets
Selecting the Paper Type (Cassette)
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Paper Settings, and then press ▼.
MAIN MENU
Paper Settings ↓
3.
Press ◄ or ► to select Cas Paper Type, and then press ▼.
Paper Settings
Cas Paper Type ↓
4.
Press ◄ or ► to select the paper type, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Cas Paper Type
= Plain Paper
Note
• For details on paper types, see the Paper Reference Guide. (→P.107)
By factory default, Plain Paper is selected.
5.
Press the Online button to bring the printer online.
Handling Paper 167
Handling sheets
Selecting the Paper Type (Tray)
When changing the type of paper after the paper has been advanced, specify the type of paper as follows.
Note
• After you press the Feeder Selection button to illuminate the Paper Tray lamp, a screen is displayed for
selection of the paper type.
Press ◄ or ► to select the type of paper, and then press the OK button to display a screen for selection
of the paper size. (→P.193)
• If you have sent the print job from a computer beforehand, the screen for paper type and size selection
is not displayed. Printing will start after the paper is advanced.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Paper Settings, and then press ▼.
MAIN MENU
Paper Settings ↓
3.
Press ◄ or ► to select Manual Pap.Type, and then press ▼.
Paper Settings
Manual Pap.Type ↓
Note
• Manual Pap.Type is not displayed unless paper is loaded in the Tray.
4.
Check the paper type.
To use this type of paper without changing it, press the OK button. To change the paper type,
press ◄ or ► to select another type, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Manual Pap.Type
= Plain Paper
Note
• Select POP Board when loading heavyweight paper.
• For details on paper types, see the Paper Reference Guide. (→P.107) By factory default, Plain
Paper is selected.
• Be sure to select the correct paper type. If this setting does not match the loaded paper, it may
cause feed errors and affect printing quality.
168 Handling Paper
Handling sheets
5.
Press the Online button to bring the printer online.
Handling Paper 169
Handling sheets
Selecting the Paper Size (Cassette)
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Paper Settings, and then press ▼.
MAIN MENU
Paper Settings ↓
3.
Press ◄ or ► to select Cas Paper Size, and then press ▼.
Paper Settings
Cas Paper Size ↓
4.
Press ◄ or ► to select the paper size, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Cas Paper Size
= ISO A4
Important
• When printing originals centered on the paper, specify the correct size of the paper actually loaded in
the printer menu and printer driver.
If the size setting does not match the size of paper actually loaded, the original will not be printed
correctly in the center.
Note
• For details on paper sizes, see “Paper Sizes”. (→P.112)
5.
Press the Online button to bring the printer online.
170 Handling Paper
Handling sheets
Removing Paper from the Cassette
Caution
• When printing from the Cassette, do not remove the Cassette. This also may cause paper jams.
• When printing from the Cassette, do not remove the Back Cover. This also may cause paper jams.
1.
Push in the Output Tray Extension.
2.
Grasp the handle (a) on the front of the Cassette and pull it forward a little. Holding the Cassette
on both sides with both hands, remove the cassette.
Caution
• When removing the Cassette, do not drag it on the table. This may damage the table.
3.
Squeeze the Guide Lever of the paper Width Guide (a) and slide it to the left. Similarly, squeeze
the Guide Lever of the paper Length Guide (b) and slide it toward you. You can now remove
the paper.
Handling Paper 171
Handling sheets
Removing Sheets from the Top Paper Feed Slot
Press the Stop/Eject button to eject the sheet.
Note
• Before ejecting paper during print jobs or while ink is still drying, press the Stop/Eject button to cancel
printing, print job processing, or ink drying.
The paper is ejected from the front of the printer.
172 Handling Paper
Handling sheets
Clearing Jammed Paper from the Cassette
If paper from the Cassette becomes jammed, the following messages are shown on the Display Screen of the
Control Panel. How to clear the paper jam varies depending on the message.
• Can’t DetectPapr / Remove Paper (→P.173)
• Paper Jam / Press ↑ Key (→P.176)
If Can’t DetectPapr / Remove Paper is displayed
If paper is jammed in the paper feed slot of the cassette
1.
Grasp the handle (a) on the front of the Cassette and pull it forward a little. Holding the Cassette
on both sides with both hands, remove the cassette.
2.
Clear any jammed paper from the paper feed slot of the Cassette.
After removing the paper, make sure there are no other scraps of paper in the printer.
3.
Holding the Cassette on both sides with both hands, insert it rmly into the printer.
Handling Paper 173
Handling sheets
If paper is jammed in the back of the printer
1.
While squeezing the two levers (a) at two positions on the Back Cover, remove the Back Cover
from the printer.
2.
Remove the jammed paper from the back.
After removing the paper, make sure there are no other scraps of paper in the printer.
Caution
• Do not touch the areas in the printer indicated by (a). If the grease that coats these parts is
accidentally wiped away, it may cause feeding problems.
174 Handling Paper
Handling sheets
3.
After attaching the Back Cover, push the lower part of the levers at two positions so that the
levers are aligned with the marks on the Back Cover.
Handling Paper 175
Handling sheets
If Paper Jam / Press ↑ Key is displayed
1.
Press ▲.
2.
Remove the jammed paper.
• If paper is jammed inside the Top Cover
1. Open the Top Cover and move the Carriage to the side.
2. Clear any jammed paper from inside the Top Cover.
After removing the paper, make sure there are no other scraps of paper in the printer.
3. Close the Top Cover.
176 Handling Paper
Handling sheets
Important
• Do not touch the Linear Scale (a) or Carriage Shaft (b). This may stain your hands and damage
the printer.
• If paper is jammed in the back of the printer
1. While squeezing the two levers (a) at two positions on the Back Cover, remove the cover
from the printer.
2. Remove the jammed paper from the back.
After removing the paper, make sure there are no other scraps of paper in the printer.
Handling Paper 177
Handling sheets
3. After attaching the Back Cover, push the lower part of the levers at two positions so that the
levers are aligned with the marks on the Back Cover.
• If the paper is jammed by the Output Tray.
1. Remove the jammed paper from the Output Tray.
After removing the paper, make sure there are no other scraps of paper in the printer.
3.
Press ▼.
178 Handling Paper
Handling sheets
Clearing Jammed Paper from the Tray
If a sheet loaded manually becomes jammed, Paper Jam / Press ↑ Key is shown on the Display Screen of
the Control Panel. Remove the jammed paper as follows.
1.
Press ▲.
2.
Remove the jammed paper.
• If paper is jammed inside the Top Cover
1. Open the Top Cover and move the Carriage to the side.
2. Clear any jammed paper from inside the Top Cover.
After removing the paper, make sure there are no other scraps of paper in the printer.
3. Close the Top Cover.
Handling Paper 179
Handling sheets
Important
• Do not touch the Linear Scale (a) or Carriage Shaft (b).
• If paper is jammed by the Paper Feed Slot of the Tray
Remove the jammed paper from the Paper Feed Slot.
After removing the paper, make sure there are no other scraps of paper in the printer. If paper is
jammed deep in the Paper Feed Slot (→P.181), remove the Roll Feed Unit and clear the paper jam.
• If the paper is jammed by the Output Tray Output Tray
Remove the jammed paper from the Output Tray.
After removing the paper, make sure there are no other scraps of paper in the printer.
180 Handling Paper
Handling sheets
• If paper is jammed in the back of the printer
Remove the jammed paper from the back.
After removing the paper, make sure there are no other scraps of paper in the printer.
3.
Press ▼.
If paper is jammed deep in the Paper Feed Slot, remove the Roll Feed Unit and clear the paper jam as follows.
1.
Turn off the printer and remove the Roll Feed Unit from the printer.
(→P.147)
2.
Remove the jammed paper from the Paper Feed Slot.
After removing the paper, make sure there are no other scraps of paper in the printer.
3.
Install the Roll Feed Unit on the printer.
(→P.148)
Handling Paper 181
Handling sheets for paper feed slots
Handling sheets for paper feed slots
Selecting the Tray as the Paper Source
You can switch between manual and auto paper feed methods by pressing the Feeder Selection button.
The Auto Feed lamp is lit when feeding paper automatically, and the Paper Tray lamp is lit when feeding
paper manually.
When loading paper in the tray, you must specify manual feed. Press Feeder Selection to activate the
Paper Tray lamp (a).
Caution
• Paper jams may occur if you load paper other than the paper specied in the paper settings for the
media source. If you insert the edge of a roll in the Paper Feed Slot after you have selected sheets as
the type of paper in the media source on the Control Panel and specied the type and size of paper,
the printer will prepare to print on the roll. If you print under these conditions, an error will occur when
the roll is ejected. (→P.747)
Note
• You cannot switch the paper source in the following situations:
• If the Message lamp is ashing
Check the message on the Display Screen and take action as necessary. (→P.729)
• If the Data lamp is ashing
Select the paper source after printing is nished.
• If a printer menu operation is in progress
Select the paper source after the operation is nished.
After the Paper Tray lamp is lit, the printer automatically shows a menu for selection of the paper type on the
Display Screen.
And then specify the paper type. (→P.168)
182 Handling Paper
Handling sheets for paper feed slots
Loading Sheets Manually
When using the tray, load the paper in the Top Paper Feed Slot. (→P.183) However, if you have specied
POP Board, insert the sheet in the Front Paper Feed Slot. (→P.186)
Loading paper in the Top Paper Feed Slot
Note
• You can load only one sheet in the Top Paper Feed Slot. Do not load more than one sheet at a time.
This may cause paper jams.
•
•
•
•
Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.
Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.
Load the paper straight. Loading paper askew will cause an error.
Before feeding paper or printing, make sure the sheet is at against the Paper Tray Cover . The sheet
may jam if it curls before feeding or printing and the trailing edge drops toward the front.
• If a roll is loaded, rewind the roll before this procedure. (→P.146)
1.
If you send a print job specifying a paper other than POP Board from a computer beforehand,
the type and size of paper are shown on the Display Screen.
Note
• If you will load paper before sending a print job, press the Feeder Selection button to illuminate the
Paper Tray lamp. A screen is displayed for selection of the paper type. Press ◄ or ► to select the
paper type, and then press the OK button. Next, a screen is displayed for selection of the paper size.
Press ◄ or ► to select the size of paper, and then press the OK button.
• For details on paper types, see the Paper Reference Guide. (→P.107) By factory default, Plain
Paper is selected.
• Be sure to select the correct paper type. If this setting does not match the loaded paper, it may
cause feed errors and affect the printing quality.
2.
Open the Paper Tray Cover.
Handling Paper 183
Handling sheets for paper feed slots
3.
Slide the Width Guide (a) to align it with the mark for the size of paper you will load.
4.
Load the paper in the Tray with the printing side face-up.
Insert the paper until its edge touches the far end of the tray lightly.
5.
Move the Width Guide (a) to match the size of paper loaded.
Set the Width Guide against the edge of the paper to prevent the paper from becoming crooked
or wrinkled.
184 Handling Paper
Handling sheets for paper feed slots
6.
Press the OK button to start feeding the paper.
Load Top Tray
Press OK
After the paper is advanced and the printer goes online, printing starts automatically.
If no print job was received beforehand, the printer enters Standby mode.
7.
Pull out the Output Tray Extension.
Note
• When printing from the Top Paper Feed Slot, always make sure the Vertical Paper Guides are stored out
of the way. If the Vertical Paper Guides are up and a printed document is left in the Output Tray, the
Front Tray Guides may become caught inside the Front Paper Feed Slot. (→P.726)
Handling Paper 185
Handling sheets for paper feed slots
Loading heavyweight paper in the Front Paper Feed Slot
Important
• Before loading heavyweight paper, change the media type setting to POP Board. When POP Board is
selected as the type of paper, Front Paper Feed Slot is automatically selected.
• Always load a POP Board in the Front Paper Feed Slot. Loading it another way may damage the
printer or cause malfunction.
Note
•
•
•
•
•
1.
You can load only one sheet of paper at a time.
Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.
If the paper is warped, straighten it before loading it.
Load the paper straight. Loading paper askew will cause an error.
After loading the paper, you cannot move it laterally to reposition it. Be sure to load the paper straight.
If you send a print job specifying POP Board from a computer beforehand, the type and size
of paper are shown on the Display Screen.
Note
• If you will load paper before sending a print job, press the Feeder Selection button to illuminate the
Paper Tray lamp. A screen is displayed for selection of the paper type. Press ◄ or ► to select the
paper type, and then press the OK button. Next, a screen is displayed for selection of the paper size.
Press ◄ or ► to select the size of paper, and then press the OK button.
• For details on types of paper, see the Paper Reference Guide. (→P.107) By factory default, Plain
Paper is selected.
• Be sure to select the correct paper type. If this setting does not match the type of paper loaded, it
may cause feed errors and affect the printing quality.
2.
Check the space behind the printer when the following message is displayed, and then press
the OK button.
Chk Back Space
Press OK
Note
• Sufcient space behind the printer is required when loading paper in the Front Paper Feed Slot. For
details on the space required for installation, see “Specications”. (→P.72)
186 Handling Paper
Handling sheets for paper feed slots
3.
Push the knob (a) of the Vertical Paper Guides back to lift the Vertical Paper Guides.
4.
After the following message is displayed, open the Top Cover.
Open UpperCover
Handling Paper 187
Handling sheets for paper feed slots
5.
When the following message is displayed, place the paper printing-side up on the Vertical Paper
Guides and insert the paper in the Front Paper Feed Slot keeping it at against the Vertical
Paper Guides.
Load Front Tray
Load Paper
188 Handling Paper
Handling sheets for paper feed slots
6.
As you look in the Top Cover, align the right edge of the paper with the left edge of the Paper
Alignment Line (a) on the Platen. Insert the leading edge of the paper between the Platen and
Paper Retainer (b), keeping it parallel to the Paper Retainer (b), and align the paper with the
Paper Alignment Line (c) of the Output Tray.
Important
• Never touch the Linear Scale (a) or Carriage Shaft (b). This may stain your hands and damage
the printer.
Handling Paper 189
Handling sheets for paper feed slots
7.
After the following message is displayed, close the Top Cover.
Close UpperCover
8.
After the following message is displayed, press the OK button.
Load Front Tray
Press OK
The paper is held between the Platen and Back Cover as it is fed.
Ofine
Loading..
After the paper is advanced, the printer automatically goes online and starts printing.
If no print job has been received from the computer beforehand, the printer enters Standby mode.
9.
10.
Pull out the Output Tray Extension.
After printing, the printer will temporarily stop advancing the paper while the trailing edge is still in
the rollers to prevent the sheet from dropping. Press the ▲ button to release the sheet. After
pulling it straight out, press the ▼ button. (→P.196)
Note
• Remove the printed document on the Output Tray after printing from the Front Paper Feed Slot. If
you print while a document is still there, the Front Tray Guides may become caught inside the Front
Paper Feed Slot. (→P.726)
190 Handling Paper
Handling sheets for paper feed slots
Selecting the Paper Type (Tray)
When changing the type of paper after the paper has been advanced, specify the type of paper as follows.
Note
• After you press the Feeder Selection button to illuminate the Paper Tray lamp, a screen is displayed for
selection of the paper type.
Press ◄ or ► to select the type of paper, and then press the OK button to display a screen for selection
of the paper size. (→P.193)
• If you have sent the print job from a computer beforehand, the screen for paper type and size selection
is not displayed. Printing will start after the paper is advanced.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Paper Settings, and then press ▼.
MAIN MENU
Paper Settings ↓
3.
Press ◄ or ► to select Manual Pap.Type, and then press ▼.
Paper Settings
Manual Pap.Type ↓
Note
• Manual Pap.Type is not displayed unless paper is loaded in the Tray.
4.
Check the paper type.
To use this type of paper without changing it, press the OK button. To change the paper type,
press ◄ or ► to select another type, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Manual Pap.Type
= Plain Paper
Note
• Select POP Board when loading heavyweight paper.
• For details on paper types, see the Paper Reference Guide. (→P.107) By factory default, Plain
Paper is selected.
• Be sure to select the correct paper type. If this setting does not match the loaded paper, it may
cause feed errors and affect printing quality.
Handling Paper 191
Handling sheets for paper feed slots
5.
Press the Online button to bring the printer online.
192 Handling Paper
Handling sheets for paper feed slots
Selecting the Paper Size (Tray)
To change the paper size after paper has been advanced, select the paper size as follows.
Note
• After you press the Feeder Selection button to illuminate the Paper Tray lamp, a screen is displayed for
selection of the paper type. Press ◄ or ► to select the paper type, and then press the OK button. Next,
a screen is displayed for selection of the paper size. Press ◄ or ► to select the size of paper, and then
press the OK button. The printer is now ready to advance the paper.
• If you have sent the print job from a computer beforehand, the screen for paper type and size selection
is not displayed. Printing will start after the paper is advanced.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Paper Settings, and then press ▼.
MAIN MENU
Paper Settings ↓
3.
Press ◄ or ► to select Manual Pap.Size, and then press ▼.
Paper Settings
Manual Pap.Size ↓
Note
• Manual Pap.Size is not displayed unless paper is loaded in the Tray.
Handling Paper 193
Handling sheets for paper feed slots
4.
Check the paper size.
To use the paper size without changing it, press the OK button. To change the paper size, press
◄ or ► to select another size, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Manual Pap.Size
= ISO A4
If you selected Manual Input in Manual Pap.Size, enter the paper size and press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Manual Input
=297.0 mm
Important
• When centering originals on the paper and during HP-GL/2 printing, always specify the same type
and size of paper in the printer menu and printer driver.
Jobs will not be printed correctly if the type and size do not match.
Note
• For details on paper sizes, see “Paper Sizes”. (→P.112)
5.
Press the Online button to bring the printer online.
194 Handling Paper
Handling sheets for paper feed slots
Removing Sheets from the Top Paper Feed Slot
Press the Stop/Eject button to eject the sheet.
Note
• Before ejecting paper during print jobs or while ink is still drying, press the Stop/Eject button to cancel
printing, print job processing, or ink drying.
The paper is ejected from the front of the printer.
Handling Paper 195
Handling sheets for paper feed slots
Removing Heavyweight Paper from the Front Paper Feed
Slot
If you are printing heavyweight paper from the Front Paper Feed Slot, the printer will stop advancing the paper while
the trailing edge is still in the rollers to prevent the sheet from dropping. In this case, remove the paper as follows.
1.
Press the ▲ button.
Note
• If you load paper from the Front Paper Feed Slot but press the ▲ button without printing, the printer
will eject the paper and stop advancing it momentarily while the trailing edge is still in the rollers to
prevent the sheet from dropping. Press the ▲ button again when you are ready to remove the paper.
2.
Pull the sheet straight forward to remove it.
Note
• If you do not remove POP Board by pulling it straight forward, the printed surface may become
scratched.
3.
Press the ▼ button.
Caution
• After removal, press the ▼ button. If you do not remove the paper before doing subsequent
operations, the sheet may go back inside the printer, leaving roller marks across the trailing edge of
paper.
196 Handling Paper
Handling sheets for paper feed slots
Clearing Jammed Paper from the Tray
If a sheet loaded manually becomes jammed, Paper Jam / Press ↑ Key is shown on the Display Screen of
the Control Panel. Remove the jammed paper as follows.
1.
Press ▲.
2.
Remove the jammed paper.
• If paper is jammed inside the Top Cover
1. Open the Top Cover and move the Carriage to the side.
2. Clear any jammed paper from inside the Top Cover.
After removing the paper, make sure there are no other scraps of paper in the printer.
3. Close the Top Cover.
Handling Paper 197
Handling sheets for paper feed slots
Important
• Do not touch the Linear Scale (a) or Carriage Shaft (b).
• If paper is jammed by the Paper Feed Slot of the Tray
Remove the jammed paper from the Paper Feed Slot.
After removing the paper, make sure there are no other scraps of paper in the printer. If paper is
jammed deep in the Paper Feed Slot (→P.199), remove the Roll Feed Unit and clear the paper jam.
• If the paper is jammed by the Output Tray Output Tray
Remove the jammed paper from the Output Tray.
After removing the paper, make sure there are no other scraps of paper in the printer.
198 Handling Paper
Handling sheets for paper feed slots
• If paper is jammed in the back of the printer
Remove the jammed paper from the back.
After removing the paper, make sure there are no other scraps of paper in the printer.
3.
Press ▼.
If paper is jammed deep in the Paper Feed Slot, remove the Roll Feed Unit and clear the paper jam as follows.
1.
Turn off the printer and remove the Roll Feed Unit from the printer.
(→P.147)
2.
Remove the jammed paper from the Paper Feed Slot.
After removing the paper, make sure there are no other scraps of paper in the printer.
3.
Install the Roll Feed Unit on the printer.
(→P.148)
Handling Paper 199
Output Stacker
Output Stacker
Desktop Stacker
The printer can be used with the following Desktop Stacker. (Optional)
• Desktop Stacker BU-02
Note
• For Desktop Stacker installation instructions, refer to the instructions provided with the Desktop Stacker.
200 Handling Paper
Output Stacker
Using the Output Stacker
The Output Stacker can be used in two positions, as shown.
Regular position
Extended position
Use the Output Stacker in the normal position.
For some types of media, you can use the stacker in the extended position. Squeeze the wires of Basket Wire
#2 (a) and pull them toward the front (b). Peel off the Velcro Tape (c) of the Basket Band and fasten it in
the middle of Basket Rod #2 (d) to put the stacker in the extended position. This position enables printed
documents to be removed more easily.
For information on the position for easy removal, refer to the Paper Reference Guide. (→P.107)
Important
• The Output Stacker can hold one sheet. When printing multiple pages, remove each sheet after it
is printed.
Handling Paper 201
Print quality and color settings
Enhanced Printing Options
Print quality and color settings
Choosing a Paper for Printing
Choosing the right paper for your particular printing application will give you the best printing results.
Media type
The printer and printer driver offer print settings optimized for various paper characteristics.
Note
• For information on the types of paper the printer supports, refer to the Paper Reference Guide. (→P.107)
• The paper type setting in the printer driver and related software (as well as on the Control Panel ) is
updated when you install the Media Conguration Tool from the User Software CD-ROM or if you change
paper information by using the Media Conguration Tool. For information about the Media Conguration
Tool, see the Media Conguration Tool Guide (Windows) or Media Conguration Tool Guide (Macintosh).
• An error message is displayed on the printer Control Panel if the paper type as specied in the printer
driver does not match the type specied on the printer. Although you can print under these conditions,
the printing results may not be suitable.
If the paper type is not listed for selection
If the type of paper loaded cannot be selected, try specifying glossy paper or proong paper as a special
paper (Special 1 to Special 5, in this order). BK ( Black Ink ) is used as the black ink. Try specifying other
types of paper as Special 6 to Special 10. MBK ( Matte Black Ink ) is used as the black ink. Note that higher
numbers in this setting enable more vivid colors but may also cause colors to run together.
For instructions on specifying the paper type before printing, refer to the following topics, as appropriate for
your computer and operating system.
• Selecting the Paper Type (Roll) (→P.124)
• Selecting the Paper Type (Tray) (→P.168)
• Selecting the Paper Type (Cassette) (→P.167)
202 Enhanced Printing Options
Print quality and color settings
Giving Priority to Particular Graphic Elements and Colors
for Printing
You can specify detailed print settings as desired for the quality level, colors, and other criteria.
Advanced Settings
For printing results that appear just as expected for your original, you can specify which graphic elements and
colors to prioritize for printing.
Note
• Easy Settings are also available, providing convenient presets. To use the presets, simply choose
the printing application.
For details on Easy Settings, refer to the following topics.
•
•
•
•
•
Printing Photos and Images (Windows, Mac OS X) (→P.207)
Printing Photos and Images (Mac OS 9) (→P.209)
Printing Line Drawings and Text (Windows, Mac OS X) (→P.211)
Printing Line Drawings and Text (Mac OS 9) (→P.212)
Printing Ofce Documents (→P.213)
Print Priority
Choose the graphic elements that you want to emphasize for printing.
Print Priority (*1)
Description
Image
A setting for posters or other documents made up mainly of photos or images, or for
emphasizing photos or images in printed documents.
Line Drawing/Text
Choose this setting for CAD drawings made up mainly of intricate lines, or wall
newspapers and other notices with a large amount of text. Suitable for emphasizing
detailed text in printed documents.
However, the quality may not be sufcient when printing photos or images that
require a lot of color coverage. In this case, choose “Image” instead.
Ofce Document
Choose this setting for better legibility of documents combining text and graphics,
such as documents and presentation material created with typical ofce applications.
*1: Options suitable for the selected paper type are listed under Print Priority.
Enhanced Printing Options 203
Print quality and color settings
Print Quality
Choose the print quality.
The printing mode is determined by a combination of the print quality and resolution.
Print Quality (*1)
Description
Print Priority
Highest
A setting for printing at the highest resolution when quality is
most important. Printing takes longer and consumes more
ink than in other modes, but this mode offers superior printing
quality.
Image
High
Choose this setting to print at high resolution when quality is
most important.
Printing takes longer and consumes more ink than in
“Standard” or “Draft” modes, but this mode offers exceptional
printing quality.
Image
Line Drawing/Text
Standard
Choose this setting to print at standard resolution when quality Image
and speed are both important.
Line Drawing/Text
Printing takes less time than in “Highest” or “High” mode.
Ofce Document
Draft
Choose this setting to print faster.
Image
Printing in draft mode can help you work more efciently when Line Drawing/Text
checking layouts.
*1: Options suitable for the selected Print Priority are listed under Print Quality.
204 Enhanced Printing Options
Print quality and color settings
Color Settings
Setting Item
Options
Description
Color Mode (*1)
Color
Monochrome (Photo)
Monochrome
Choose whether to print in color or
monochrome.
(→P.214)
Color Adjustment (Images)
Cyan
Magenta
Yellow
Brightness
Contrast
Saturation
Gray Tone Adjustment
You can adjust the levels of cyan,
magenta, and yellow as well as the
brightness, contrast, saturation,
and gray tone separately for
images, graphics, and text
documents.
If you choose Monochrome in
Color Mode only Brightness and
Contrast can be adjusted.
Gray Adjustment
Color Balance
Brightness
Contrast
Highlight
Shadow
Choose the gray tone color balance
( Cool Black or Warm Black )
and adjust levels of brightness,
contrast, highlight, and shadow as
desired.
These levels can be adjusted when
Monochrome (Photo) is selected
in Color Mode .
Color-Matching Modes
Driver Matching Mode
ICC Matching Mode
Off
Choose the color-matching mode.
Other color-matching modes may
be provided by the computer
operating system, such as ICM
and ColorSync.
Color-Matching Method (*2)
Auto
Perceptual
Perceptual (People, Dark Areas)
Saturation
Colorimetric
Others
Choose the color-matching
method. The available options
vary depending on your selection
in “Color-Matching Mode.”
Color Space (*3)
sRGB
Adobe RGB
Choose a standard color space
( sRGB ) or an expanded color
space ( Adobe RGB ).
Color Adjustment (Graphics)
Color Adjustment (Text)
*1: Options suitable for the selected Print Priority are listed under Color Mode.
*2: The order of options displayed varies depending on the operating system.
*3: Adobe RGB is not available if an incompatible combination of the paper type and print quality is
selected.
Enhanced Printing Options 205
Print quality and color settings
Enhancing Printing Quality
Setting Item
Description
Thicken Fine Lines (*1)
Choose this option to make ne lines clearer in CAD
drawings or similar documents.
Unidirectional Printing
Choosing unidirectional printing can improve printing
results if lines are printed crooked or images are
uneven. However, it takes more time than regular
printing.
High-Precision Printing
Enables printing at the highest level of quality.
However, this requires more time than usual for
printing.
*1: Displayed in Windows and Mac OS 9.
Note
• To print at a higher level of quality, in the printer driver, choose High or Highest in Print Quality, and
choose Unidirectional Printing as the direction of printing.
• For instructions on specifying the print quality and color settings before printing, refer to the following
topics, as appropriate for your computer and operating system.
• Choosing the Document Type and Printing Conditions (Windows) (→P.220)
• Choosing the Document Type and Printing Conditions (Mac OS X) (→P.222)
• Choosing the Document Type and Printing Conditions (Mac OS 9) (→P.225)
206 Enhanced Printing Options
Print quality and color settings
Printing Photos and Images (Windows, Mac OS X)
Printing is easy when you simply choose the print target.
Easy Settings
Simply choose the printing application in the list for optimal printing results.
Print Target
Choose presets that match the type of document to be printed.
Print targets for photos and images
Print Target
Description
Highest Quality
Setting optimized for printing at the highest level
of quality.
Draft
Setting optimized for high-speed draft printing.
Photo (Photo Studio)
For printing with an effect similar to that produced
by photo studios. In subdued, dark photos,
images of people and dark scenes are printed
attractively.
Photo (Standard)
Setting optimized for printing photographic
images from digital cameras.
Photo (Adobe RGB)
Setting optimized for printing in colors matching
those of images created using the Adobe RGB
color space.
Photo (Monochrome)
Setting optimized for printing monochrome
photos in the neutral black image tone of
conventional lm photographs.
Poster (Photos)
Suitable for printing posters composed mainly of
photographs.
Enhanced Printing Options 207
Print quality and color settings
Print Target
Description
Poster (Text, Illustrations)
Setting optimized for printing vivid, eye-catching
store posters combining images and text.
Scanned Image
Setting optimized for printing scanned images
with accurate color reproduction to match the
original images.
Caution
• Depending on the Media Type setting, some Print Target options may not be available.
Note
• You can check the settings values for each print target by clicking View Settings.
• You can also ne-tune these values as needed. (Advanced Settings)
For details on Advanced Settings, see “Giving Priority to Particular Graphic Elements and Colors
for Printing”. (→P.203)
• For instructions on printing photos and images, refer to the following topics, as appropriate for your
computer and operating system.
• Printing Photos and Images (Windows) (→P.257)
• Printing Photos and Images (Mac OS X) (→P.259)
208 Enhanced Printing Options
Print quality and color settings
Printing Photos and Images (Mac OS 9)
Printing is easy when you simply choose the print target.
Easy Settings
Simply choose the printing application in the list for optimal printing results.
Print Target
Choose presets that match the type of document to be printed.
Print targets for photos and images
Print Target
Description
Highest Quality
Settings optimized for printing at the highest
level of quality.
Photos (High Image Quality)
Setting optimized for printing photographic
images at a higher level of quality.
Photo (from digital camera)
Settings optimized for printing photographic
images from digital cameras.
Photo (Monochrome)
Setting optimized for printing monochrome
photos in the neutral black image tone of
conventional lm photographs.
Adobe RGB Images
Settings optimized for printing in colors matching
those of images created using the Adobe RGB
color space.
Poster (Graphic Image)
Settings optimized for printing posters mainly
composed of photos and images.
POP Ad
Settings optimized for printing vivid, eye-catching
store posters combining images and text.
Enhanced Printing Options 209
Print quality and color settings
Print Target
Description
Scanned Image
Settings optimized for printing scanned images
with accurate color reproduction to match the
original images.
Draft
Settings optimized for high-speed draft printing.
Caution
• Depending on the Media Type setting, some Print Target options may not be available.
Note
• You can check the settings values for each print target by clicking View Settings.
• You can also ne-tune these values as needed. (Advanced Settings)
For details on Advanced Settings, see “Giving Priority to Particular Graphic Elements and Colors
for Printing”. (→P.203)
• For instructions on printing photos and images, refer to the following topics, as appropriate for your
computer and operating system.
• Printing Photos and Images (Mac OS 9) (→P.209)
210 Enhanced Printing Options
Print quality and color settings
Printing Line Drawings and Text (Windows, Mac OS X)
Printing is easy when you simply choose the type of original to print.
Easy Settings
Simply choose the printing application in the list for optimal printing results.
Print Target
Choose presets that match the type of document to be printed.
Print targets for line drawings and text
Print Target
Description
Poster (Notice Announcement)
Settings optimized for printing announcements
such as wall newspapers and other notices with
a large amount of text.
3D CAD, GIS
Settings optimized for printing 3D CAD drawings,
perspective drawings, and maps, including GIS
maps.
CAD (Line Drawing)
Settings optimized to print intricate lines in CAD
drawings clearly.
Note
• You can check the settings values for each print target by clicking View Settings.
• You can also ne-tune these values as needed. (Advanced Settings)
For details on Advanced Settings, see “Giving Priority to Particular Graphic Elements and Colors
for Printing”. (→P.203)
For instructions on printing line drawings and text, refer to the following topics, as appropriate for your
computer and operating system.
• Printing Line Drawings and Text (Windows) (→P.245)
• Printing Line Drawings and Text (Mac OS X) (→P.247)
Enhanced Printing Options 211
Print quality and color settings
Printing Line Drawings and Text (Mac OS 9)
Printing is easy when you simply choose the type of original to print.
Easy Settings
Simply choose the printing application in the list for optimal printing results.
Print Target
Choose presets that match the type of document to be printed.
Print targets for line drawings and text
Print Target
Description
Poster (Notice Announcement)
Settings optimized for printing announcements
such as wall newspapers and other notices with
a large amount of text.
3D-CAD/GIS
Settings optimized for printing 3D CAD drawings,
perspective drawings, and maps, including GIS
maps.
CAD (Line Drawing)
Settings optimized to print intricate lines in CAD
drawings clearly.
Note
• You can check the settings values for each print target by clicking View Settings.
• You can also ne-tune these values as needed. (Advanced Settings)
For details on Advanced Settings, see “Giving Priority to Particular Graphic Elements and Colors
for Printing”. (→P.203)
For instructions on printing line drawings and text, refer to the following topics, as appropriate for your
computer and operating system.
• Printing Line Drawings and Text (Mac OS 9) (→P.212)
212 Enhanced Printing Options
Print quality and color settings
Printing Ofce Documents
Printing is easy when you simply choose the type of original to print.
Easy Settings
Simply choose the printing application in the list for optimal printing results.
Print Target
Choose presets that match the type of document to be printed.
Print targets for ofce documents
Print Target
Ofce Document
Description
Settings optimized for clear printing of ofce
documents such as handouts.
Note
• You can check the settings values for each print target by clicking View Settings.
• You can also ne-tune these values as needed. (Advanced Settings)
For details on Advanced Settings, see “Giving Priority to Particular Graphic Elements and Colors
for Printing”. (→P.203)
For instructions on printing ofce documents, refer to the following topics, as appropriate for your computer
and operating system.
• Printing Ofce Documents (Windows) (→P.251)
• Printing Ofce Documents (Mac OS X) (→P.253)
• Printing Ofce Documents (Mac OS 9) (→P.255)
Enhanced Printing Options 213
Print quality and color settings
Adjusting the Color in the Printer Driver
Color settings specied in the application for your documents are essentially given priority over other settings
for each print job, but further color adjustment is possible in the printer driver.
Color Mode
Choose how the printer driver processes color, as desired.
The available options vary depending on the color mode.
Description
Color Mode
Color
Color Adjustment
Print in color.
You can adjust the color balance and
color-matching method.
Monochrome (Photo) Grayscale printing optimized for
monochrome photos.
You can adjust the color balance in ways
tailored to monochrome photos.
Monochrome
You can adjust the color balance.
Print in grayscale.
Color Adjustment
You can adjust colors separately for images, graphics, and text documents.
Adjustment Item
Cyan
Magenta
Description
Correct color tones by adjusting the levels of Cyan
, Magenta , and Yellow .
Yellow
Brightness
Adjust the brightness of printed images while keeping
the darkest and lightest portions intact.
Contrast
Adjust the contrast of the darkest and lightest portions
relative to each other.
For soft gradation, decrease the contrast. For hard
gradation, increase the contrast.
Saturation
Adjust the level of color saturation, in a range from
subdued to vivid.
Gray Tone Adjustment
Adjust the grayscale, in a range from cool, blue tones
to warm, red tones.
214 Enhanced Printing Options
Print quality and color settings
Matching
You can choose the color-matching mode and method.
By adjusting the color-matching mode and method, you can make printed colors match the colors of
on-screen images more closely.
Matching Mode
Description
Notes
Driver Matching Mode
Color adjustment based on the
original color prole of the printer
driver
This is the default color-matching
method. Normally, use Driver
Matching Mode .
ICC Matching Mode
Color adjustment based on ICC
color proles (an international
standard) using the printer driver
You can select the printer prole in
the Printer Prole Settings list.
Driver ICM Mode
Color adjustment based on the
standard Windows ICM function.
The printer driver adjusts the
colors.
Available when using Windows
2000, Windows XP, or Windows
Server 2003/Windows Vista
Host ICM Mode
Color adjustment based on the
standard Windows ICM function.
Windows adjusts the colors.
ColorSync
Color adjustment based on the
standard Mac OS ColorSync
function. Mac OS adjusts the
colors.
Available when using the Mac OS
Off (No Correction)
No color-matching
Choose this option for
color-matching by the software
application or with your own color
prole, when you want to disable
color-matching by the printer driver.
Enhanced Printing Options 215
Print quality and color settings
Matching Method
Description
Auto
Color-matching optimized for
images, graphics, or text
Perceptual
Color-matching optimized for
photos. Print images with smooth
gradations and colors closer to
those as displayed on the screen.
Perceptual (People, Dark Areas) Color matching optimized for
printing skin tone and dark areas
attractively in subdued, dark
photos. For printing indoor shots
of people or evening scenes
attractively.
Colorimetric
Color-matching with adjustment
to remove color from white area.
Without white adjustment, colors
are added to white area.
Colorimetric (No Wht-pnt Corr)
Color-matching without white
adjustment to reect the prole
of original data. Without white
adjustment, colors are added to
white area.
Saturation
Color-matching optimized for
graphics. This option emphasizes
color saturation.
216 Enhanced Printing Options
Notes
The available options and their
display order varies depending on
your selection in Color-Matching
Mode, as well as the operating
system.
Print quality and color settings
Gray Tone Adjustment
The following settings can be adjusted if “Monochrome (Photo)” is selected in Color Mode.
Gray Adjustment
Description
Items
Color Balance
Enables you to adjust the gray tone to suit the images of monochrome photos.
Choose cool black (tinged with blue), pure black (neutral), warm black (tinged with
red), and so on.
Select the color tone in the color region or from the list.
Brightness
Adjust the brightness of printed images while keeping the darkest and lightest
portions intact.
Contrast
Adjust the contrast of the darkest and lightest portions relative to each other.
For soft gradation, decrease the contrast. For hard gradation, increase the contrast.
Highlight
Adjust levels of image highlight areas.
Shadow
Adjust levels of image shadow areas.
Note
• Be sure to calibrate your monitor colors correctly if you adjust the colors for printing. If monitor colors
are not calibrated correctly, you may not obtain the desired printing results. For instructions on monitor
calibration, refer to the documentation for your monitor and operating system.
For instructions on color adjustment, refer to the following topics, as appropriate for your computer and
operating system.
• Fine-Tuning Colors of Photos and Images (Windows) (→P.228)
• Fine-Tuning Colors of Photos and Images (Mac OS X) (→P.231)
• Fine-Tuning Colors of Photos and Images (Mac OS 9) (→P.234)
Enhanced Printing Options 217
Print quality and color settings
Printing in Ideal Colors for Light in the Viewing
Environment
You can print in the colors that look best when viewed under the light where the printed image will be displayed.
There are two ways to adjust the color tone for the ambient light, as follows.
By selecting color tones on Charts before printing
On the printed Chart, note the number of the set of colors with the desired color tone and enter this number in
the printer driver before printing.
Important
• This function requires that the Light Source Check Tool be installed.
• You can install the Light Source Check Tool from the User Software CD-ROM.
• This function is only supported in Windows.
For instructions on selecting color tones on Charts before printing, refer to the following topic:
• By selecting color tones on Charts before printing (Windows) (→P.632)
Printing in Colors Matching the Measured Ambient Light
Measure the light level in the viewing environment and enter the results in the printer driver before printing.
Important
• This function requires the Eye-One spectrophotometer. The Light Source Measure Tool must also
be installed.
• You can install the Light Source Measure Tool from the User Software CD-ROM.
• For a list of supported Eye-One devices, refer to the manual provided with the Light Source Measure
Tool.
• This function is only supported in Windows.
For instructions on measuring light levels before printing, refer to the following topic:
• Printing in Colors Matching the Measured Ambient Light (→P.636)
218 Enhanced Printing Options
Print quality and color settings
Printing Photos in Monochrome
The following settings are available for monochrome printing.
Main Easy
Settings
Print
Target
Advanced Color
Settings
Mode
Photo
A mode optimized for printing monochrome images with
(Monochrome) maximum expressiveness through simple operations.
Choosing Photo (Monochrome) in Easy Settings applies
image processing to keep color ink use to an absolute
minimum, suppressing color shift and achieving consistent
gray balance.
• Photo (Monochrome) is not available for all types of
paper.
• Printing that matches the pure neutral black of conventional
photos (silver-halide prints) is possible.
Printing Photos in Monochrome (Windows) (→P.265)
Printing Photos in Monochrome (Mac OS X) (→P.267)
Printing Photos in Monochrome (Mac OS 9) (→P.270)
Monochrome
(Photo)
A mode for printing monochrome images with maximum
expressiveness by specifying detailed settings. In these
settings, you can specify to apply image processing to keep
color ink use to an absolute minimum, suppress color shift,
and achieve consistent gray balance. You can also ne-tune
the color balance by selecting “Warm Black,” “Cool Black”,
and so on.
• Even more detailed adjustment is possible on the Color
Adjustment sheet.
• Monochrome (Photo) is not available for all types of
paper.
Fine-Tuning Monochrome Settings When Printing Photos
(Windows) (→P.237)
Fine-Tuning Monochrome Settings When Printing Photos
(Mac OS X) (→P.239)
Fine-Tuning Monochrome Settings When Printing Photos
(Mac OS 9) (→P.242)
Monochrome
Deactivates color printing so that images are printed in
monochrome, with continuous-tone color data printed using
gray midtones. Use this mode to print ofce documents or
graphics in monochrome, or if the paper is not compatible
with the Monochrome (Photo) setting.
• Even more detailed adjustment is possible on the Color
Adjustment sheet.
• If the paper is not compatible with the Monochrome
(Photo) setting, choose Monochrome .
• Because color ink is used to produce gray continuous-tone
images, the gray may appear to have a tinge of color.
Fine-Tuning Monochrome Settings When Printing Photos
(Windows) (→P.237)
Fine-Tuning Monochrome Settings When Printing Photos
(Mac OS X) (→P.239)
Fine-Tuning Monochrome Settings When Printing Photos
(Mac OS 9) (→P.242)
Enhanced Printing Options 219
Print quality and color settings
Choosing the Document Type and Printing Conditions
(Windows)
You can specify your own print settings instead of using the Print Target presets. This topic describes how
to print CAD drawings in monochrome.
1.
2.
3.
Choose Print in the application menu.
4.
5.
In the A Media Type list, select the type of paper that is loaded.
6.
7.
Click Line Drawing/Text in the E Print Priority list.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Click D Advanced Settings to switch the print mode.
Click Standard (600dpi) in the F Print Quality list.
Note
• Options displayed in the F Print Quality list vary depending on the paper type.
220 Enhanced Printing Options
Print quality and color settings
8.
9.
Click Monochrome in the G Color Mode list.
To adjust the brightness and contrast, click H Color Settings.
Note
• For instructions on adjusting brightness and contrast, see “Adjusting the Color in the Printer Driver”.
(→P.214)
10.
Click the Page Setup tab to display the Page Setup sheet.
11.
12.
Conrm the settings of A Page Size, L Media Source, and so on.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
Enhanced Printing Options 221
Print quality and color settings
Choosing the Document Type and Printing Conditions
(Mac OS X)
You can specify your own print settings instead of using the Print Target presets. This topic describes how
to print CAD drawings in monochrome.
1.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the printer in the B Format for list.
7.
In the A Media Type list, select the type of paper that is loaded.
Choose the original size in the C Paper Size list.
Click F OK to close the dialog box.
In the application menu, choose Print.
Access the Main pane.
222 Enhanced Printing Options
Print quality and color settings
8.
9.
10.
Click D Advanced Settings to switch the print mode.
Click Line Drawing in the E Print Priority list.
Click Standard(600dpi) in the F Print Quality list.
Note
• Options displayed in the F Print Quality list vary depending on the paper type.
11.
12.
Click Monochrome in the H Color Mode list.
To adjust the brightness and contrast, click I Set.
Note
• For instructions on adjusting brightness and contrast, see “Adjusting the Color in the Printer Driver”.
(→P.214)
Enhanced Printing Options 223
Print quality and color settings
13.
Access the Page Setup pane.
14.
15.
Conrm the settings of A Media Source and C Page Size.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
224 Enhanced Printing Options
Print quality and color settings
Choosing the Document Type and Printing Conditions
(Mac OS 9)
You can specify your own print settings instead of using the Print Target presets. This topic describes how
to print CAD drawings in monochrome.
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
Choose the original size in the A Page Size list.
7.
In the C Media Type list, select the type of paper that is loaded.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
In the application menu, choose Print.
Make sure the Main pane is displayed.
Enhanced Printing Options 225
Print quality and color settings
8.
9.
10.
Click E Advanced Settings to switch the print mode.
Click Line Drawing in the F Print Priority list.
Click Standard(600dpi) in the G Print Quality list.
Note
• Options displayed in the G Print Quality list vary depending on the paper type.
11.
12.
Click Monochrome in the H Color Mode list.
To adjust brightness and contrast, click I Set.
Note
• For instructions on adjusting brightness and contrast, see “Adjusting the Color in the Printer Driver”.
(→P.214)
226 Enhanced Printing Options
Print quality and color settings
13.
Access the Finishing pane.
14.
15.
Conrm the selection in A Media Source.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
Enhanced Printing Options 227
Print quality and color settings
Fine-Tuning Colors of Photos and Images (Windows)
You can specify your own print settings instead of using the Print Target presets. This topic describes how
to ne-tune the color tone of photos before printing.
1.
2.
3.
Choose Print in the application menu.
4.
5.
In the A Media Type list, select the type of paper that is loaded.
6.
Click Color in the G Color Mode list.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Click D Advanced Settings to switch the print mode.
228 Enhanced Printing Options
Print quality and color settings
7.
Click H Color Settings to display the Color Settings dialog box.
8.
On the Color Adjustment sheet, adjust the color tones, brightness, and so on as desired.
Adjustment Item
C Cyan
D Magenta
Description
Correct color tones by adjusting the levels of Cyan ,
Magenta , and Yellow .
E Yellow
9.
F Brightness
Adjust the brightness of printed images while
keeping the darkest and lightest portions intact.
G Contrast
Adjust the contrast of the darkest and lightest
portions relative to each other.
For soft gradation, decrease the contrast. For hard
gradation, increase the contrast.
H Saturation
Adjust the level of color saturation, in a range from
subdued to vivid.
I Gray Tone Adjustment
Adjust the gray tone to suit the images of
monochrome photos. Choose cool black (tinged
with blue), pure black (neutral), warm black (tinged
with red), and so on. Select the color tone in the
color region or from the list.
Close the Color Settings dialog box.
Enhanced Printing Options 229
Print quality and color settings
10.
Click the Page Setup tab to display the Page Setup sheet.
11.
12.
Conrm the settings of A Page Size, L Media Source, and so on.
Conrm the print settings and print as desired.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
230 Enhanced Printing Options
Print quality and color settings
Fine-Tuning Colors of Photos and Images (Mac OS X)
You can specify your own print settings instead of using the Print Target presets. This topic describes how
to ne-tune the color tone of photos before printing.
1.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the printer in the B Format for list.
7.
In the A Media Type list, select the type of paper that is loaded.
Choose the original size in the C Paper Size list.
Click F OK to close the dialog box.
Choose Print in the application menu.
Access the Main pane.
Enhanced Printing Options 231
Print quality and color settings
8.
9.
10.
Click D Advanced Settings to switch the print mode.
Click Color in the H Color Mode list.
Click I Set to display the Color Settings dialog box.
232 Enhanced Printing Options
Print quality and color settings
11.
On the Color Adjustment pane, adjust the color tones, brightness, and so on as desired.
Adjustment Item
C Cyan
D Magenta
Description
Correct color tones by adjusting the levels of Cyan ,
Magenta , and Yellow .
E Yellow
F Brightness
Adjust the brightness of printed images while
keeping the darkest and lightest portions intact.
G Contrast
Adjust the contrast of the darkest and lightest
portions relative to each other.
For soft gradation, decrease the contrast. For hard
gradation, increase the contrast.
H Saturation
Adjust the level of color saturation, in a range from
subdued to vivid.
I Gray Tone
Adjust the gray tone to suit the images of
monochrome photos. Choose cool black (tinged
with blue), pure black (neutral), warm black (tinged
with red), and so on. Select the color tone in the
color region or from the list.
12.
13.
Click OK to close the Color Settings dialog box.
14.
15.
Conrm the settings of A Media Source and C Page Size.
Access the Page Setup pane.
Conrm the print settings, and then click M Print to start printing.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
Enhanced Printing Options 233
Print quality and color settings
Fine-Tuning Colors of Photos and Images (Mac OS 9)
You can specify your own print settings instead of using the Print Target presets. This topic describes how
to ne-tune the color tone of photos before printing.
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
Choose the original size in the A Page Size list.
7.
In the C Media Type list, select the type of paper that is loaded.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
234 Enhanced Printing Options
Print quality and color settings
8.
9.
10.
Click E Advanced Settings to switch the print mode.
Click Color in the H Color Mode list.
Click I Set to display the Color Settingsdialog box.
Enhanced Printing Options 235
Print quality and color settings
11.
On the Color Adjustment pane, adjust the color tones, brightness, and so on as desired.
Adjustment Item
C Cyan
D Magenta
Description
Correct color tones by adjusting the levels of Cyan ,
Magenta , and Yellow .
E Yellow
F Brightness
Adjust the brightness of printed images while
keeping the darkest and lightest portions intact.
G Contrast
Adjust the contrast of the darkest and lightest
portions relative to each other.
For soft gradation, decrease the contrast. For hard
gradation, increase the contrast.
H Saturation
Adjust the level of color saturation, in a range from
subdued to vivid.
I Gray Tone
Adjust the gray tone to suit the images of
monochrome photos. Choose cool black (tinged
with blue), pure black (neutral), warm black (tinged
with red), and so on. Select the color tone in the
color region or from the list.
12.
13.
Click OK to close the Color Settings dialog box.
14.
15.
Conrm the selection in A Media Source.
Access the Finishing pane.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
236 Enhanced Printing Options
Print quality and color settings
Fine-Tuning Monochrome Settings When Printing Photos
(Windows)
You can specify your own print settings instead of using the Print Target presets. This topic describes how to
ne-tune monochrome settings before printing.
1.
2.
3.
Choose Print in the application menu.
4.
5.
In the A Media Type list, select the type of paper that is loaded.
6.
Click Monochrome (Photo) in the G Color Mode list.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Click D Advanced Settings to switch the print mode.
Note
• Monochrome (Photo) may not be available for all types of paper.
Enhanced Printing Options 237
Print quality and color settings
7.
Click H Color Settings to display the Color Settings dialog box.
8.
9.
10.
On the Gray Adjustment sheet, adjust the color tones, brightness, and so on as desired.
11.
12.
Conrm the settings of A Page Size, L Media Source, and so on.
Close the Color Settings dialog box.
Click the Page Setup tab to display the Page Setup sheet.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
238 Enhanced Printing Options
Print quality and color settings
Fine-Tuning Monochrome Settings When Printing Photos
(Mac OS X)
You can specify your own print settings instead of using the Print Target presets. This topic describes how to
ne-tune monochrome settings before printing.
1.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the print target in the B Format for list.
7.
In the A Media Type list, select the type of paper that is loaded.
Choose the original size in the C Paper Size list.
Click F OK to close the dialog box.
In the source application menu, choose Print.
Access the Main pane.
Enhanced Printing Options 239
Print quality and color settings
8.
Click D Advanced Settings to switch the print mode.
9.
Click Monochrome (Photo) in the H Color Mode list.
Note
• Monochrome (Photo) may not be available for all types of paper.
10.
Click I Set to display the Color Settings dialog box.
11.
12.
On the Gray Adjustment pane, adjust the color tones, brightness, and so on as desired.
Click OK to close the Color Settings dialog box.
240 Enhanced Printing Options
Print quality and color settings
13.
Access the Page Setup pane.
14.
15.
Conrm the settings of A Media Source and C Page Size.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
Enhanced Printing Options 241
Print quality and color settings
Fine-Tuning Monochrome Settings When Printing Photos
(Mac OS 9)
You can specify your own print settings instead of using the Print Target presets. This topic describes how to
ne-tune monochrome settings before printing.
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
Choose the original size in the A Page Size list.
7.
In the C Media Type list, select the type of paper that is loaded.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
In the source application menu, choose Print.
Make sure the Main pane is displayed.
242 Enhanced Printing Options
Print quality and color settings
8.
Click E Advanced Settings to switch the print mode.
9.
Click Monochrome (Photo) in the H Color Mode list.
Note
• Monochrome (Photo) may not be available for all types of paper.
10.
Click I Set to display the Color Settings dialog box.
11.
On the Gray Tone Adjustment pane, adjust the color tones, brightness, and so on as desired.
Enhanced Printing Options 243
Print quality and color settings
12.
Access the Finishing pane.
13.
14.
Conrm the selection in A Media Source.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
244 Enhanced Printing Options
Print quality and color settings
Printing Line Drawings and Text (Windows)
This topic describes how to print line drawings based on the following example.
•
•
•
•
•
Document: CAD drawing
Page size: A3 (297.0×420.0 mm [11.7 × 16.5 in])
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper size: A3 (297.0×420.0 mm [11.7 × 16.5 in])
1.
2.
3.
Choose Print in the application menu.
4.
5.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
After conrming that D Easy Settings is selected, click CAD (Line Drawing) in the E Print
Target list.
Note
• You can check the settings values selected in the E Print Target list by clicking F View Settings.
Enhanced Printing Options 245
Print quality and color settings
6.
Click the Page Setup tab to display the Page Setup sheet.
7.
In A Page Size, click the size of the original as specied in the application. In this case, click
ISO A3.
8.
9.
Click Cassette in the L Media Source list.
Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Windows)”. (→P.465)
10.
Conrm the print settings and print as desired.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
246 Enhanced Printing Options
Print quality and color settings
Printing Line Drawings and Text (Mac OS X)
This topic describes how to print line drawings based on the following example.
•
•
•
•
•
Document: CAD drawing
Page Size: A3 (297.0×420.0 mm [11.7 × 16.5 in])
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper Size: A3 (297.0×420.0 mm [11.7 × 16.5 in])
1.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the printer in the B Format for list.
7.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
In the C Paper Size list, click the size of the original. In this case, click ISO A3.
Click F OK to close the dialog box.
Choose Print in the application menu.
Access the Main pane.
Enhanced Printing Options 247
Print quality and color settings
8.
After conrming that D Easy Settings is selected, click CAD (Line Drawing) in the E Print
Target list.
Note
• You can check the settings values selected in the E Print Target list by clicking F View set.
9.
10.
11.
Access the Page Setup pane.
Click Cassette in the A Media Source list.
Make sure C Page Size on the Page Setup pane shows the original size as specied in C
Paper Size in the Page Attribute dialog box-in this case, ISO A3.
12.
Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Mac OS X)”. (→P.516)
13.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
248 Enhanced Printing Options
Print quality and color settings
Printing Line Drawings and Text (Mac OS 9)
This topic describes how to print line drawings based on the following example.
•
•
•
•
•
Document: CAD drawing
Page Size: A3 (297.0×420.0 mm [11.7 × 16.5 in])
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper size: A3 (297.0×420.0 mm [11.7 × 16.5 in])
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
In the A Page Size list, click the size of the original. In this case, click ISO A4.
7.
In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
Enhanced Printing Options 249
Print quality and color settings
8.
After conrming that E Easy Settings is selected, click CAD (Line Drawing) or CAD
(Monochrome Line Drawing ) in the F Print Target list.
Note
• You can check the settings values selected in the F Print Target list by clicking G View set.
9.
10.
11.
Access the Finishing pane.
Click Cassette in the A Media Source list.
Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Mac OS 9)”. (→P.541)
12.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
250 Enhanced Printing Options
Print quality and color settings
Printing Ofce Documents (Windows)
This topic describes how to print ofce documents based on the following example.
•
•
•
•
•
Document: Ofce document created using word-processing software or spreadsheet programs
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
1.
2.
3.
Choose Print in the application menu.
4.
5.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
After conrming that D Easy Settings is selected, click Ofce Document in the E Print
Target list.
Note
• You can check the settings values selected in the E Print Target list by clicking F View Settings.
Enhanced Printing Options 251
Print quality and color settings
6.
Click the Page Setup tab to display the Page Setupsheet.
7.
In the A Page Size list, click the size of the original as specied in the application. In this case,
click ISO A4 or Letter (8.5"x11").
8.
9.
Click Cassette in the L Media Source list.
Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Windows)”. (→P.465)
10.
Conrm the print settings and print as desired.
Caution
• Depending on the Media Type setting, some Print Target options may not be available.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
252 Enhanced Printing Options
Print quality and color settings
Printing Ofce Documents (Mac OS X)
This topic describes how to print ofce documents based on the following example.
•
•
•
•
•
Document: Ofce document created using word-processing or spreadsheet programs
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper size: A4 (210.0×297.0 mm)/Letter (8.3×11.7 in)/Letter (8.3 × 11.7 in)
1.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the printer in the B Format for list.
7.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
In the C Paper Size list, click the size of the original. In this case, click ISO A4.
Click F OK to close the dialog box.
Choose Print in the application menu.
Access the Main pane.
Enhanced Printing Options 253
Print quality and color settings
8.
After conrming that D Easy Settings is selected, click Ofce Document in the E Print
Target list.
Note
• You can check the settings values selected in the E Print Target list by clicking F View set.
9.
10.
11.
Access the Page Setup pane.
Click Cassette in the A Media Source list.
Make sure C Page Size shows the original size as specied in C Paper Size in the Page
Attribute dialog box-in this case, ISO A4.
12.
Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Mac OS X)”. (→P.516)
13.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
254 Enhanced Printing Options
Print quality and color settings
Printing Ofce Documents (Mac OS 9)
This topic describes how to print ofce documents based on the following example.
•
•
•
•
•
Document: Ofce document created using word-processing or spreadsheet programs
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
In the A Page Size list, click the size of the original. In this case, click ISO A4.
7.
In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
Enhanced Printing Options 255
Print quality and color settings
8.
After conrming that E Easy Settings is selected, click Ofce Document in the F Print Target
list.
Note
• You can check the settings values selected in the F Print Target list by clicking G View set.
9.
10.
11.
Access the Finishing pane.
Click Cassette in the A Media Source list.
Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Mac OS 9)”. (→P.541)
12.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
256 Enhanced Printing Options
Print quality and color settings
Printing Photos and Images (Windows)
This topic describes how to print photos based on the following example.
•
•
•
•
•
Document: Photo image from a digital camera
Page size: 10×12 inches (254.0×304.8 mm)
Paper: Roll
Paper type: Glossy Photo Paper
Roll paper width: 10 inches (254.0 mm)
1.
2.
3.
Choose Print in the application menu.
4.
In the A Media Type list, select the type of paper that is loaded. In this case, click Glossy
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Photo Paper.
In the A Media Type, choose the type of paper used for printing, such as Glossy Paper, Coated
Paper, and so on. Make sure the paper you select is loaded in the printer.
Note
• The paper type setting in the printer driver and related software (as well as on the Control Panel ) is
updated when you install the Media Conguration Tool from the User Software CD-ROM or if you
change paper information by using the Media Conguration Tool. (See the Media Conguration Tool
Guide (Windows) or Media Conguration Tool Guide (Macintosh).)
5.
After conrming that D Easy Settings is selected, click Photo (Standard) or Photo (Photo
Studio) in the E Print Target list.
Note
• For information on settings optimized for printing photos and images, see “Printing Photos and
Images (Windows, Mac OS X)”. (→P.207)
• You can check the settings values selected in the E Print Target list by clicking F View Settings.
Enhanced Printing Options 257
Print quality and color settings
6.
Click the Page Setup tab to display the Page Setup sheet.
7.
In the A Page Size list, click the size of the original as specied in the application. In this case,
click 10"x12".
8.
9.
Click Roll Paper in the L Media Source list.
Select the width of the loaded roll in the M Roll Paper Width list. In this case, click 10-in.
Roll (254.0mm), and then click OK.
10.
Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Windows)”. (→P.465)
11.
Conrm the print settings and print as desired.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
258 Enhanced Printing Options
Print quality and color settings
Printing Photos and Images (Mac OS X)
This topic describes how to print photos based on the following example.
•
•
•
•
•
Document: Photo image from a digital camera
Page Size: 10×12 inches (254.0×304.8 mm)
Paper: Roll
Paper Type: Glossy Photo Paper
Roll paper Width: 10 inches (254 mm)
1.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the printer in the B Format for list.
In the C Paper Size list, click the size of the original. In this case, click 10"x12".
Click F OK to close the dialog box.
Choose Print in the application menu.
Access the Main pane.
Enhanced Printing Options 259
Print quality and color settings
7.
In the A Media Type list, select the type of paper that is loaded. In this case, click Glossy
Photo Paper.
Make sure the paper you select is loaded in the printer.
Note
• The paper type setting in the printer driver and related software (as well as on the Control Panel ) is
updated when you install the Media Conguration Tool from the User Software CD-ROM or if you
change paper information by using the Media Conguration Tool. See the Media Conguration Tool
Guide (Windows) or Media Conguration Tool Guide (Macintosh).
8.
After conrming that D Easy Settings is selected, click Photo (Standard) or Photo (Photo
Studio) in the E Print Target list.
Note
• For information on settings optimized for printing photos and images, see “Printing Photos and
Images (Windows, Mac OS X)”. (→P.207)
• You can check the settings values selected in the E Print Target list by clicking F View set.
9.
10.
Access the Page Setup pane.
Click Roll Paper in the A Media Source list.
260 Enhanced Printing Options
Print quality and color settings
11.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list in this case, 10
in. (254.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on
the Main pane and update the printer information.
12.
Make sure C Page Size on the Page Setup pane shows the original size as specied in C
Paper Size in the Page Attribute dialog box-in this case, 10"x12".
13.
Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Mac OS X)”. (→P.516)
14.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
Enhanced Printing Options 261
Print quality and color settings
Printing Photos and Images (Mac OS 9)
This topic describes how to print photos based on the following example.
•
•
•
•
•
Document: Photo image from a digital camera
Page size: 10×12 inches (254.0×304.8 mm)
Paper: Roll
Paper type: Glossy Photo Paper
Roll paper width: 10 inches (254.0mm)
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
In the A Page Size list, click the size of the original. In this case, click 10"x12".
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
262 Enhanced Printing Options
Print quality and color settings
7.
In the C Media Type list, select the type of paper that is loaded. In this case, click Glossy
Photo Paper.
In the C Media Type setting, choose the type of paper for printing, such as Glossy Paper,
Coated Paper, and so on. Make sure the paper you select is loaded in the printer.
Note
• The paper type setting in the printer driver and related software (as well as on the Control Panel ) is
updated when you install the Media Conguration Tool from the User Software CD-ROM or if you
change paper information by using the Media Conguration Tool. See the Media Conguration Tool
Guide (Windows) or Media Conguration Tool Guide (Macintosh).
8.
After conrming that E Easy Settings is selected, click Photo (from digital camera) in the
F Print Target list.
Note
• You can check the settings values selected in the F Print Target list by clicking G View set.
9.
10.
Access the Finishing pane.
Click Roll Paper in the A Media Source list.
Enhanced Printing Options 263
Print quality and color settings
11.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10
in. (254.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main
pane and update the printer information.
12.
Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Mac OS 9)”. (→P.541)
13.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
264 Enhanced Printing Options
Print quality and color settings
Printing Photos in Monochrome (Windows)
This topic describes how to print photos in monochrome based on the following example.
•
•
•
•
•
Original: Photo image from a digital camera
Page size: 10×12 inches
Paper: Roll
Paper type: Glossy Photo Paper
Roll paper width: 10 inches (254.0 mm)
1.
2.
3.
Choose Print in the application menu.
4.
In the A Media Type list, select the type of paper that is loaded. In this case, click Glossy
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Photo Paper.
In the A Media Type setting, choose the type of paper for printing, such as Glossy Paper,
Coated Paper, and so on. Make sure the paper you select is loaded in the printer.
Note
• The paper type setting in the printer driver and related software (as well as on the Control Panel ) is
updated when you install the Media Conguration Tool from the User Software CD-ROM or if you
change paper information by using the Media Conguration Tool. (See the Media Conguration Tool
Guide (Windows) or Media Conguration Tool Guide (Macintosh).)
Enhanced Printing Options 265
Print quality and color settings
5.
After conrming that D Easy Settings is selected, click Photo (Monochrome) in the E Print
Target list.
Caution
• Photo (Monochrome) may not be available for all types of paper.
Note
• You can check the settings values selected in the E Print Target list by clicking F View Settings.
6.
Click the Page Setup tab to display the Page Setup sheet.
7.
In the A Page Size list, click the size of the original as specied in the application. In this case,
click 10"x12".
8.
9.
Click Roll Paper in the L Media Source list.
Select the width of the loaded roll in the M Roll Paper Width list. In this case, click 10-in.
Roll (254.0mm), and then click OK.
10.
Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Windows)”. (→P.465)
11.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
266 Enhanced Printing Options
Print quality and color settings
Printing Photos in Monochrome (Mac OS X)
This topic describes how to print photos in monochrome based on the following example.
•
•
•
•
•
Original: Photo image from a digital camera
Page size: 10×12 inches
Paper: Roll
Paper type: Glossy Photo Paper
Roll paper width: 10 inches (254.0 mm)
1.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the print target in the B Format for list.
In the C Paper Size list, click the size of the original. In this case, click 10"x12".
Click F OK to close the dialog box.
In the source application menu, choose Print.
Access the Main pane.
Enhanced Printing Options 267
Print quality and color settings
7.
In the A Media Type list, select the type of paper that is loaded. In this case, click Glossy
Photo Paper.
In the A Media Type setting, choose the type of paper for printing, such as Glossy Paper,
Coated Paper, and so on. Make sure the paper you select is loaded in the printer.
Note
• The paper type setting in the printer driver and related software (as well as on the Control Panel ) is
updated when you install the Media Conguration Tool from the User Software CD-ROM or if you
change paper information by using the Media Conguration Tool. (See the Media Conguration Tool
Guide (Windows) or Media Conguration Tool Guide (Macintosh).)
8.
After conrming that D Easy Settings is selected, click Photo (Monochrome) in the E Print
Target list.
Caution
• Photo (Monochrome) may not be available for all types of paper.
Note
• You can check the settings values selected in the E Print Target list by clicking F View set.
9.
10.
Access the Page Setup pane.
Click Roll Paper in the A Media Source list.
268 Enhanced Printing Options
Print quality and color settings
11.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10
in. (254.0mm).
Note
• If the width of the roll loaded in the printer is not shown in B Roll Paper Width, click L Printer
Information on the Main pane to update the printer information.
12.
Make sure C Page Size on the Page Setup pane shows the original size as specied in C
Paper Size in the Page Attribute dialog box-in this case, 10"x12".
13.
Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Mac OS X)”. (→P.516)
14.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
Enhanced Printing Options 269
Print quality and color settings
Printing Photos in Monochrome (Mac OS 9)
This topic describes how to print photos in monochrome based on the following example.
•
•
•
•
•
Original: Photo image from a digital camera
Page size: 10×12 inches
Paper: Roll
Paper type: Glossy Photo Paper
Roll paper width: 10 inches (254.0 mm)
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
In the A Page Size list, click the size of the original. In this case, click 10"x12".
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
In the source application menu, choose Print.
Make sure the Main pane is displayed.
270 Enhanced Printing Options
Print quality and color settings
7.
In the C Media Type list, select the type of paper that is loaded. In this case, click Glossy
Photo Paper.
In the C Media Type setting, choose the type of paper for printing, such as Glossy Paper,
Coated Paper, and so on. Make sure the paper you select is loaded in the printer.
Note
• The paper type setting in the printer driver and related software (as well as on the Control Panel ) is
updated when you install the Media Conguration Tool from the User Software CD-ROM or if you
change paper information by using the Media Conguration Tool. (See the Media Conguration Tool
Guide (Windows) or Media Conguration Tool Guide (Macintosh).)
8.
After conrming that E Easy Settings is selected, click Photo (Monochrome) in the F Print
Target list.
Caution
• Photo (Monochrome) may not be available for all types of paper.
Note
• You can check the settings values selected in the F Print Target list by clicking G View set.
9.
10.
Access the Finishing pane.
Click Roll Paper in the A Media Source list.
Enhanced Printing Options 271
Print quality and color settings
11.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10
in. (254.0mm).
Note
• If the width of the roll loaded in the printer is not shown in B Roll Paper Width, click L Printer on the
Main pane to update the printer information.
12.
Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Mac OS 9)”. (→P.541)
13.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
272 Enhanced Printing Options
Printing enlargements or reductions
Printing enlargements or reductions
Resizing Originals to Match the Paper Size
You can freely adjust the size of originals by enlarging or reducing them as desired.
Enlarged/Reduced Printing
Enlarge or reduce the original in the printer driver, as desired.
Fit Media Size
Enlarge or reduce the original to match the size of the paper you are using.
For instructions on resizing originals to match the paper size, refer to the following topics, as appropriate for
your computer and operating system.
• Resizing Originals to Match the Paper Size (Windows) (→P.298)
• Resizing Originals to Match the Paper Size (Mac OS X) (→P.300)
• Resizing Originals to Match the Paper Size (Mac OS 9) (→P.302)
Note
• For better printing results when enlarging photos from a digital camera in TIFF or JPEG format, use
an image-editing application software such as Adobe Photoshop to specify an image resolution of
150 dpi or more at actual size.
Enhanced Printing Options 273
Printing enlargements or reductions
Resizing Originals to Fit the Roll Width
You can freely adjust the size of originals by enlarging or reducing them as desired.
Enlarged/Reduced Printing
Enlarge or reduce the original in the printer driver, as desired.
Fit Roll Paper Width
Enlarge or reduce the original as a whole to match the roll paper width, as desired.
For instructions on resizing originals to match the roll paper width, refer to the following topics, as appropriate
for your computer and operating system.
• Resizing Originals to Fit the Roll Width (Windows) (→P.290)
• Resizing Originals to Fit the Roll Width (Mac OS X) (→P.292)
• Resizing Originals to Fit the Roll Width (Mac OS 9) (→P.295)
Note
• For better printing results when enlarging photos from a digital camera in TIFF or JPEG format, use
an image-editing application software such as Adobe Photoshop to specify an image resolution of
150 dpi or more at actual size.
274 Enhanced Printing Options
Printing enlargements or reductions
Resizing Originals by Entering a Scaling Value
You can freely adjust the size of originals by enlarging or reducing them as desired.
Enlarged/Reduced Printing
Enlarge or reduce the original in the printer driver, as desired.
Scaling
Enlarge or reduce originals by a particular amount, as desired.
For instructions on entering a scaling value to resize originals, refer to the following topics, as appropriate for
your computer and operating system.
• Resizing Originals by Entering a Scaling Value (Windows) (→P.281)
• Resizing Originals by Entering a Scaling Value (Mac OS X) (→P.283)
• Resizing Originals by Entering a Scaling Value (Mac OS 9) (→P.286)
Note
• For better printing results when enlarging photos from a digital camera in TIFF or JPEG format, use
an image-editing application software such as Adobe Photoshop to specify an image resolution of
150 dpi or more at actual size.
Enhanced Printing Options 275
Printing enlargements or reductions
Printing Enlargements of Scanned Originals from a Color
imageRUNNER
Scanned originals from a Color imageRUNNER can be enlarged and printed automatically.
For instructions on printing enlargements of scanned originals from a Color imageRUNNER, refer to the
following topic.
• Printing Enlargements of Scanned Originals from a Color imageRUNNER (Windows) (→P.277)
• Printing Enlargements of Scanned Originals from a Color imageRUNNER (Mac OS X) (→P.279)
276 Enhanced Printing Options
Printing enlargements or reductions
Printing Enlargements of Scanned Originals from a Color
imageRUNNER (Windows)
Scanned originals from a Color imageRUNNER can be enlarged and printed automatically.
Originals you create by scanning with a Color imageRUNNER are transferred to a "hot folder" and printed
automatically after enlargement according to printing conditions you specify for that folder.
This processing sequence is called the Color imageRUNNER Enlargement Copy function.
To use Color imageRUNNER Enlargement Copy, rst complete these settings in the following order.
1. Register a hot folder on your computer
Register a hot folder on your computer for storing scanned originals from the Color imageRUNNER
and complete the settings for enlargement copy.
2. Complete the scanning settings on the Color imageRUNNER.
Congure the Color imageRUNNER to send scanned originals to the hot folder.
After these settings are complete, you can print enlarged copies of scanned originals from the Color
imageRUNNER.
Registering a hot folder on your computer
Folders used for Color imageRUNNER Enlargement Copy (iR enlargement copy) are called hot folders.
Register a hot folder on your computer for storing scanned originals from the Color imageRUNNER. You can
specify printing conditions (such as the image quality and paper size), based on which originals transferred to
the hot folder will be printed. Follow these steps to register and modify hot folders.
1.
2.
Display the printer driver dialog box. (→P.499)
3.
Click B Color imageRUNNER Enlargement Copy to start the Color imageRUNNER
Click the Utility tab to display the Utility sheet.
Enlargement Copy utility.
4.
Use the Color imageRUNNER Enlargement Copy utility to register or modify hot folders.
For instructions on registering and modifying hot folders, refer to the help le for the Color
imageRUNNER Enlargement Copy utility.
Enhanced Printing Options 277
Printing enlargements or reductions
Completing the scanning settings on the Color imageRUNNER.
Congure the Color imageRUNNER to send scanned originals to the hot folder. It is easy to send scanned
originals to the hot folder if you assign the scanning settings and destination to a Favorites button on the
Color imageRUNNER.
For instructions on assigning scanning settings and destinations to a Favorites button, refer to the setting
manual, displayed by clicking Color imageRUNNER Enlargement Copy Setup Manual button of Color
imageRUNNER Enlargement Copy utility, or refer to the Color imageRUNNER manual.
Scanning the original and print an enlargement
Follow the steps below to scan an original on the Color imageRUNNER for enlarged printing on the printer.
For detailed instructions, refer to the Color imageRUNNER manual.
1.
2.
3.
4.
Load the original on the platen glass or document feeder of the Color imageRUNNER.
Press Send to display the screen for transmission.
Press Favorites, and then press the Favorites button assigned to the hot folder.
Press Start on the control panel. If you scan originals on the platen glass, after scanning all
originals, press Done on the touch-panel display.
Scanned originals are sent to the hot folder and automatically enlarged and printed following the
conditions you specied for the folder.
Note
• For details on Color imageRUNNER Enlargement Copy, refer to Color imageRUNNER Enlargement
Copy Guide .
278 Enhanced Printing Options
Printing enlargements or reductions
Printing Enlargements of Scanned Originals from a Color
imageRUNNER (Mac OS X)
Scanned originals from a Color imageRUNNER can be enlarged and printed automatically.
Originals you create by scanning with a Color imageRUNNER are transferred to a "hot folder" and printed
automatically enlarged according to printing conditions you specify for that folder.
This processing sequence is called the Color imageRUNNER Enlargement Copy function.
To use Color imageRUNNER Enlargement Copy, rst complete these settings in the following order.
1. Register a hot folder on your computer.
Register a hot folder on your computer for storing scanned originals from the Color imageRUNNER
and complete the settings for enlargement copy.
2. Complete the scanning settings on the Color imageRUNNER.
Congure the Color imageRUNNER to send scanned originals to the hot folder.
After these settings are complete, you can print enlarged copies of scanned originals from the Color
imageRUNNER.
Registering a hot folder on your computer
Folders used for Color imageRUNNER Enlargement Copy (iR enlargement copy) are called hot folders.
Register a hot folder on your computer for storing scanned originals from the Color imageRUNNER. You can
specify printing conditions (such as the image quality and paper size), based on which originals transferred to
the hot folder will be printed. Follow these steps to register and modify hot folders.
1.
To display the GARO ExtraKit dialog box, either double-click the GARO ExtraKit icon after
navigating to Applications - Canon Utilities - imagePROGRAF, or click C Set on the Utility
pane.
2.
In Enlarged Copy Settings, click Add or Edit and either create or modify the hot folder.
For instructions on registering and modifying hot folders, refer to the help le for the GARO
ExtraKit utility.
Enhanced Printing Options 279
Printing enlargements or reductions
Completing the scanning settings on the Color imageRUNNER.
Congure the Color imageRUNNER to send scanned originals to the hot folder. It is easy to send scanned
originals to the hot folder if you assign the scanning settings and destination to a Favorites button on the
Color imageRUNNER.
For instructions on assigning scanning and sending settings to the Favorites button, refer to the Color
imageRUNNER manual.
Scanning the original and print an enlargement
Follow the steps below to scan an original on the Color imageRUNNER for enlarged printing on the printer.
For detailed instructions, refer to the Color imageRUNNER manual.
1.
2.
3.
4.
Load the original on the platen glass or document feeder of the Color imageRUNNER.
Press Send to display the screen for transmission.
Press Favorites, and then press the Favorites button assigned to the hot folder.
Press Start on the control panel. If you scan originals on the platen glass, after scanning all
originals, press Done on the touch-panel display.
Scanned originals are sent to the hot folder and automatically enlarged and printed following the
conditions you specied for the folder.
Note
• For details on Color imageRUNNER Enlargement Copy, refer to Color imageRUNNER Enlargement
Copy Guide .
280 Enhanced Printing Options
Printing enlargements or reductions
Resizing Originals by Entering a Scaling Value (Windows)
This topic describes how to enlarge originals before printing by entering a scaling value, based on the following
example.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paperr width: A2/A3 roll (420.0 mm [16.5 in])
Important
• In borderless printing, you cannot resize originals by entering a scaling value.
1.
2.
3.
Choose Print in the application menu.
4.
5.
6.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Select the print target in the E Print Target list.
Click the Page Setup tab to display the Page Setup sheet.
Enhanced Printing Options 281
Printing enlargements or reductions
7.
8.
Click Roll Paper in the L Media Source list.
Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A2/A3 Roll
(420.0mm).
9.
In the A Page Size list, click the size of the original as specied in the application. In this case,
click ISO A4 or Letter (8.5"x11").
10.
11.
12.
Select the C Enlarged/Reduced Printing check box.
Click ISO A4 in the G Media Size list.
Click F Scaling and enter “120.”
Note
• You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of
the paper will not be printed.
• If the original size after enlargement or reduction is smaller than the paper size, the original is
printed in the upper-left corner. In this case, you can center originals by selecting G Print Centered
on the Layout sheet.
13.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
282 Enhanced Printing Options
Printing enlargements or reductions
Resizing Originals by Entering a Scaling Value (Mac OS
X)
This topic describes how to enlarge originals before printing by entering a scaling value, based on the following
example.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
Important
• In borderless printing, you cannot resize originals by entering a scaling value.
1.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the printer in the B Format for list.
In C Paper Size, click the size of the original. In this case, click ISO A4.
Click F OK to close the dialog box.
Choose Print in the application menu.
Access the Main pane.
Enhanced Printing Options 283
Printing enlargements or reductions
7.
8.
9.
10.
11.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the print target in the E Print Target list.
Access the Page Setup pane.
Click Roll Paper in the A Media Source list.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case,
ISO A2/A3 (420.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on
the Main pane and update the printer information.
284 Enhanced Printing Options
Printing enlargements or reductions
12.
Make sure the C Page Size setting matches the original size as selected in C Paper Size in the
Page Attribute dialog box-in this case, ISO A4.
13.
14.
Select the D Enlarged/Reduced Printing check box.
Click G Scaling and enter “120.”
Note
• You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of
the paper will not be printed.
• If the original size after enlargement or reduction is smaller than the paper size, the original is printed
in the upper-left corner. In this case, you can center originals by selecting the J Print Centered
check box.
15.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
Enhanced Printing Options 285
Printing enlargements or reductions
Resizing Originals by Entering a Scaling Value (Mac OS
9)
This topic describes how to enlarge originals before printing by entering a scaling value, based on the following
example.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
Important
• In borderless printing, you cannot resize originals by entering a scaling value.
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
In A Page Size, click the size of the original. In this case, click ISO A4.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
286 Enhanced Printing Options
Printing enlargements or reductions
7.
8.
9.
10.
11.
In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the print target in the F Print Target list.
Access the Finishing pane.
Click Roll Paper in the A Media Source list.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-here, ISO
A2/A3 (420.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main
pane and update the printer information.
Enhanced Printing Options 287
Printing enlargements or reductions
12.
Access the Page Setup pane.
13.
Make sure the B Page Size setting matches the original size as selected in A Page Size in the
Page Attribute dialog box-in this case, ISO A4.
14.
Select the C Enlarged/Reduced Printing check box.
288 Enhanced Printing Options
Printing enlargements or reductions
15.
Click F Scaling and enter “120.”
Note
• You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of
the paper will not be printed.
• If the original size after enlargement or reduction is smaller than the paper size, the original is printed
in the upper-left corner. In this case, you can center originals by selecting F Print Centered on
the Finishing pane.
16.
Conrm the print settings, and click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
Enhanced Printing Options 289
Printing enlargements or reductions
Resizing Originals to Fit the Roll Width (Windows)
This topic describes how to enlarge originals before printing to match the roll width, based on the following example.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paper width: 16 inches (406.4 mm)
1.
2.
3.
Choose Print in the application menu.
4.
5.
6.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Select the printing application in the E Print Target list.
Click the Page Setup tab to display the Page Setup sheet.
290 Enhanced Printing Options
Printing enlargements or reductions
7.
8.
Click Roll Paper in the L Media Source list.
In the A Page Size list, click the size of the original as specied in the application. In this case,
click ISO A4 or Letter (8.5"x11").
9.
Select the C Enlarged/Reduced Printing check box.
Note
• If the Enlarged/Reduced Printing check box is not displayed on the Page Setup sheet, clear the
B Borderless Printing check box.
10.
Click E Fit Roll Paper Width.
Note
• After you click E Fit Roll Paper Width, the Information dialog box is displayed. Select the width of
the loaded roll in the Roll Paper Width list and click OK.
• Make sure the roll paper width you specify matches the width of the loaded roll.
11.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
Enhanced Printing Options 291
Printing enlargements or reductions
Resizing Originals to Fit the Roll Width (Mac OS X)
This topic describes how to enlarge originals before printing to match the roll width, based on the following example.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paper width: 16 inches (406.4 mm)
1.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the printer in the B Format for list.
In C Paper Size, click the size of the original. In this case, click ISO A4.
Click F OK to close the dialog box.
Choose Print in the application menu.
Access the Main pane.
292 Enhanced Printing Options
Printing enlargements or reductions
7.
8.
9.
10.
11.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the print target in the E Print Target list.
Access the Page Setup pane.
Click Roll Paper in the A Media Source list.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 16
in. (406.4mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on
the Main pane and update the printer information.
Enhanced Printing Options 293
Printing enlargements or reductions
12.
Make sure the C Page Size setting matches the original size as selected in C Paper Size in the
Page Attribute dialog box-in this case, ISO A4.
13.
14.
15.
Select the D Enlarged/Reduced Printing check box.
Click F Fit Roll Paper Width.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
294 Enhanced Printing Options
Printing enlargements or reductions
Resizing Originals to Fit the Roll Width (Mac OS 9)
This topic describes how to enlarge originals before printing to match the roll paper width, based on the following
example.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paper width: 16 inches (406.4 mm)
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
In A Page Size, click the size of the original. In this case, click ISO A4.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
Enhanced Printing Options 295
Printing enlargements or reductions
7.
8.
9.
10.
11.
In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the print target in the F Print Target list.
Access the Finishing pane.
Click Roll Paper in the A Media Source list.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 16
in. (406.4mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main
pane and update the printer information.
296 Enhanced Printing Options
Printing enlargements or reductions
12.
Access the Page Setup pane.
13.
Make sure the B Page Size setting matches the original size as selected in A Page Size in the
Page Attribute dialog box-in this case, ISO A4.
14.
15.
16.
Select the C Enlarged/Reduced Printing check box.
Click E Fit Roll Paper Width.
Conrm the print settings, and click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
Enhanced Printing Options 297
Printing enlargements or reductions
Resizing Originals to Match the Paper Size (Windows)
This topic describes how to enlarge originals before printing to match the paper size, based on the following
example.
•
•
•
•
•
Document: Any type
Page size: B4 (257.0×364.0 mm [10.1 × 14.3 in])
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper size: A3 (297.0×420.0 mm [11.7 × 16.5 in])
1.
2.
3.
Choose Print in the application menu.
4.
5.
6.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Select the printing application in the E Print Target list.
Click the Page Setup tab to display the Page Setup sheet.
298 Enhanced Printing Options
Printing enlargements or reductions
7.
8.
Click Cassette in the L Media Source list.
In A Page Size, click the size of the original as specied in the application. In this case, click
JIS B4.
9.
10.
11.
12.
Select the C Enlarged/Reduced Printing check box.
Click D Fit Media Size.
Click ISO A3 in the G Media Size list.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
Enhanced Printing Options 299
Printing enlargements or reductions
Resizing Originals to Match the Paper Size (Mac OS X)
This topic describes how to enlarge originals before printing to match the paper size, based on the following
example.
•
•
•
•
•
Document: Any type
Page size: B4 (257.0×364.0 mm) [10.1 × 14.3 in]
Paper: Sheets ( Cassette )
Paper Type: Plain Paper
Paper size: A3 (297.0×420.0 mm) [11.7 × 16.5 in]
1.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the printer in the B Format for list.
7.
8.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
In C Paper Size, click the size of the original. In this case, click JIS B4.
Click F OK to close the dialog box.
Choose Print in the application menu.
Access the Main pane.
Select the print target in the E Print Target list.
300 Enhanced Printing Options
Printing enlargements or reductions
9.
10.
11.
Access the Page Setup pane.
Click Cassette in the A Media Source list.
Make sure the C Page Size setting matches the original size as selected in C Paper Size in the
Page Attribute dialog box-in this case, JIS B4.
12.
13.
14.
15.
Select the D Enlarged/Reduced Printing check box.
Make sure E Fit Media Size is selected.
Click ISO A3 in the I Media Size list.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
Enhanced Printing Options 301
Printing enlargements or reductions
Resizing Originals to Match the Paper Size (Mac OS 9)
This topic describes how to enlarge originals before printing to match the paper size, based on the following
example.
•
•
•
•
•
Document: Any type
Page size: B4 (257.0×364.0 mm [10.1×14.3 in])
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper size: A3 (297.0×420.0 mm [11.7×16.5 in])
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
In A Page Size, click the size of the original. In this case, click JIS B4.
7.
8.
In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
Select the print target in the F Print Target list.
302 Enhanced Printing Options
Printing enlargements or reductions
9.
Access the Finishing pane.
10.
11.
Click Cassette in the A Media Source list.
12.
Make sure the B Page Size setting matches the original size as selected in A Page Size in the
Access the Page Setup pane.
Page Attribute dialog box-in this case, JIS B4.
Enhanced Printing Options 303
Printing enlargements or reductions
13.
14.
15.
16.
Select the C Enlarged/Reduced Printing check box.
Make sure D Fit Media Size is selected.
Click ISO A4 in the H Media Size list.
Conrm the print settings, and click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
304 Enhanced Printing Options
Printing at full size
Printing at full size
Printing on Oversized Paper
Except in borderless printing, the actual printing area corresponds to your selected paper size minus the
space for a margin. (→P.78) To print documents or images you prepare without a margin at actual size,
use an oversized paper size.
For example, to print a A4-sized original without a margin at A4 size, print it on paper larger than A4 size and
cut away the excess margin.
Note
• If you prepare an original for printing without a margin and print it on paper of regular size, the image
near the edge will not be printed.
Oversize
The margin required by the printer is added around the “outside” of a regular paper size. For example, when
printing a A4-sized original (210×297 mm), you have the following options.
a. Regular paper size: Gray area not printed
b. Page Size
c. Oversized paper size: Print area matches the page size (b)
Important
• When printing on oversize paper, load paper larger than the page size-a size that includes the margin
required by the printer.
• Sheets: Load paper that is at least 6 mm (0.24 in) wider and 26 mm (1 in) higher than the page size
• Rolls: Load paper that is at least 6 mm (0.24 in) wider and 6 mm (0.24 in) higher than the page size
• Paper larger than the maximum size supported by the printer cannot be used as paper for oversized
printing. (→P.112)
Enhanced Printing Options 305
Printing at full size
Note
• Oversized printing (selecting Oversize in Page Size ) is only available in Windows. For oversized
printing on sheets, choose Cut Sheet as the media source.
• To perform oversized printing on a Macintosh computer, you must specify a non-standard page size and
print on it.
• To specify a non-standard paper size in oversized printing, register the paper size as a Custom Media
Size. Oversized printing is not available with “Custom Size.” (→P.359)
For instructions on oversized printing, refer to the following topics, as appropriate for your computer and
operating system.
• Printing at Full Size (Windows) (→P.318)
• Printing at Full Size (Mac OS X) (→P.320)
• Printing at Full Size (Mac OS 9) (→P.323)
306 Enhanced Printing Options
Printing at full size
Borderless Printing at Actual Size
Take advantage of borderless printing to print documents such as posters (made up mainly of photos or
images) without a surrounding margin, or border.
Borderless Printing
In regular printing, a margin required by the printer is added around the original. With borderless printing, you
can print documents without the margin, so that the printed image covers the entire surface of the paper.
Important
• Borderless printing is only available with rolls.
• Paper you can use for borderless printing is restricted to particular types of paper and rolls of particular
widths. For information on types of paper compatible with borderless printing, refer to the Paper
Reference Guide. (→P.107)
• If you use an A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.144)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
• Paper incompatible with the printer’s auto cut function can be printed without borders on the left and
right sides only.
• These features cannot be used in combination with borderless printing: special page layouts, centering
originals, and printing cut lines on rolls.
• You cannot have pages rotated 90 degrees to conserve paper if you have set up borderless printing at
actual size or in combination with resizing originals to match the paper size.
• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be
uneven at the edges. If you require higher image quality, specify No in Auto Cut in the printer driver. In
this case, the paper can be printed without borders on the left and right sides only. After ejecting and
cutting the printed document, use scissors to cut away the top and bottom edges.
• By factory default, the ink drying time is disabled for all paper. When you are using paper that takes
longer for ink to adhere for borderless printing and the Cutter Unit touches printing surfaces that are not
dry yet, it may damage the paper or the edge of the document that is cut, depending on frequency of
use. In this case, follow these steps to change the ink drying time.
1. On the Main sheet of the printer driver, click Settings in Media Type.
2. Select the ink drying time in the Between Pages list of Drying Time.
Borderless Printing Method
Choose the method of borderless printing that suits the original, as desired.
Enhanced Printing Options 307
Printing at full size
Print Image with Actual Size
Prints originals at actual size, without enlarging or reducing them. Originals must be prepared in a size that
exceeds the dimensions of the paper by 3 mm (0.12 in) on each side.
Note
• Not all page sizes are available.
• Even if you prepare originals of the same size as the paper size, the originals are automatically enlarged
when you print borderlessly in combination with resizing originals to match the paper size. This may
affect image quality. When image quality is most important, make the original 3 mm longer on each side
than the paper size so that the image can be printed at actual size in borderless printing.
For instructions on borderless printing of photos and images at actual size, refer to the following topics, as
appropriate for your computer and operating system.
• Borderless Printing at Actual Size (Windows) (→P.309)
• Borderless Printing at Actual Size (Mac OS X) (→P.311)
• Borderless Printing at Actual Size (Mac OS 9) (→P.314)
308 Enhanced Printing Options
Printing at full size
Borderless Printing at Actual Size (Windows)
This topic describes how to print borderlessly at actual size based on the following example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.144)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
•
•
•
•
•
1.
Document: Any type
Page size: 10×12 inches (254.0×304.8 mm)
Paper: Roll
Paper type: Heavyweight Coated Paper
Roll paper width: 10 inches (254.0 mm)
Create the original in the source application 3 mm (0.12 in) larger on each side than 254.0×304.8
mm (10 × 12 in) -that is, 260.0×310.8 mm (10.2 × 12.2 in)
Note
• If you can specify the margin, as in Microsoft Word, set the margin at 0 mm. For instructions on
specifying the margin, refer to the software documentation.
• The extra 3 mm (0.12 in) on each side will not be printed. Create the original so that it ts inside the
paper area to be printed on.
2.
3.
4.
Choose Print in the application menu.
5.
In the A Media Type list, select the type of paper that is loaded. In this case, click Heavyweight
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Coated Paper.
6.
Select the print target in the E Print Target list.
Enhanced Printing Options 309
Printing at full size
7.
Click the Page Setup tab to display the Page Setup sheet.
8.
In the A Page Size list, click the size of the original as specied in the source application.
In this case, click 10"x12".
9.
10.
Click Roll Paper in the L Media Source list.
11.
Select the width of the loaded roll in the Roll Paper Width list-in this case, click 10-in. Roll
Select the B Borderless Printing check box to display the Information dialog box.
(254.0mm).
12.
13.
14.
Click OK to close the Information dialog box.
In C Borderless Printing Method, click F Print Image with Actual Size.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
310 Enhanced Printing Options
Printing at full size
Borderless Printing at Actual Size (Mac OS X)
This topic describes how to print borderlessly at actual size based on the following example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.144)
The platen may be soiled from borderless printing if you do not attach it.
•
•
•
•
•
Document: Any type
Page size: 10 × 12 inches (254.0×304.8 mm)-Borderless
Paper: Roll
Paper type: Heavyweight Coated Paper
Roll paper width: 10 inches (254.0 mm)
1.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
2.
3.
Select the printer in the B Format for list.
In the C Paper Size list, choose a paper size supported for borderless printing. Here, click
10"x12" - Borderless.
Note
• Paper sizes supported for borderless printing are indicated by “-Borderless.”
4.
5.
6.
7.
Click F OK to close the dialog box.
In the application, create an original that takes up the entire space of the paper size.
Choose Print in the application menu.
Access the Main pane.
Enhanced Printing Options 311
Printing at full size
8.
In the A Media Type list, select the type of paper that is loaded. In this case, click Heavyweight
Coated Paper.
9.
10.
Select the print target in the E Print Target list.
11.
12.
Click Roll Paper in the A Media Source list.
Access the Page Setup pane.
Conrm that the roll paper width matches the paper size.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10
in. (254.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on
the Main pane and update the printer information.
312 Enhanced Printing Options
Printing at full size
13.
Make sure the C Page Size setting matches the original size as selected in C Paper Size in the
Page Attribute dialog box-in this case, 10"x12" - Borderless.
14.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
Enhanced Printing Options 313
Printing at full size
Borderless Printing at Actual Size (Mac OS 9)
This topic describes how to print borderlessly at actual size based on the following example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.144)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
•
•
•
•
•
Document: Any type
Page size: 10 × 12 inches (254.0×304.8 mm)-Borderless
Paper: Roll
Paper type: Heavyweight Coated Paper
Roll width: 10 inches (254.0 mm)
1.
2.
Select the printer in Chooser.
3.
4.
In D Print Area Setting, click H For Broderless Printing.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
In the A Page Size list, choose a paper size supported for borderless printing. Here, click
10"x12" - Borderless.
Note
• Paper sizes supported for borderless printing are indicated by “-Borderless.”
5.
6.
7.
Click I OK to close the dialog box.
In the application, create an original that takes up the entire space of the paper size.
Choose Print in the application menu.
314 Enhanced Printing Options
Printing at full size
8.
Make sure the Main pane is displayed.
9.
In the C Media Type list, select the type of paper that is loaded. In this case, click Heavyweight
Coated Paper.
10.
11.
Select the print target in the F Print Target list.
12.
Click Roll Paper in the A Media Source list.
Access the Finishing pane.
Enhanced Printing Options 315
Printing at full size
13.
Conrm that the roll paper width matches the paper size.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10
in. (254.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main
pane and update the printer information.
14.
Access the Page Setup pane.
316 Enhanced Printing Options
Printing at full size
15.
Make sure the B Page Size setting matches the original size as selected in A Page Size in the
Page Attribute dialog box-in this case, 10"x12".
16.
Conrm the print settings, and click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
Enhanced Printing Options 317
Printing at full size
Printing at Full Size (Windows)
This topic describes how to print at full size based on the following example. (Oversized Printing)
•
•
•
•
•
Document: Any Type
Page Size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
1.
2.
3.
Choose Print in the application menu.
4.
5.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Click the Page Setup tab to display the Page Setup sheet.
318 Enhanced Printing Options
Printing at full size
6.
7.
8.
9.
10.
11.
Click O Size Options to display the Media Size Options dialog box.
In the Media Size Options dialog box, select the Oversize check box in Display Series.
Click OK to close the Media Size Options dialog box.
Click Oversize - ISO A4 in the A Page Size list.
Click Roll Paper in the L Media Source list.
Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A2/A3 Roll
(420.0mm).
12.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
Note
• You can select Oversize in Display Series to make all oversized versions of paper in the selected
Display Series available for printing. These sizes are displayed in the Page Size list in the format
Oversize - xxxxxx.
Enhanced Printing Options 319
Printing at full size
Printing at Full Size (Mac OS X)
This topic describes how to print at full size based on the following example. (Oversized Printing)
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
1.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
2.
3.
Select the printer in the B Format for list.
In C Paper Size, click the size of the original. In this case, click ISO A4 - Oversize.
Note
• For oversized printing, choose paper identied by the regular paper name followed by “- Oversize.”
4.
5.
6.
Click F OK to close the dialog box.
Choose Print in the application menu.
Access the Main pane.
320 Enhanced Printing Options
Printing at full size
7.
8.
9.
10.
11.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the printing application in the E Print Target list.
Access the Page Setup pane.
Click Roll Paper in the A Media Source list.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case,
ISO A2/A3 (420.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on
the Main pane and update the printer information.
Enhanced Printing Options 321
Printing at full size
12.
Make sure C Page Size shows the original size as specied in C Paper Size in the Page
Attribute dialog box-in this case, ISO A4 - Oversize.
13.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
322 Enhanced Printing Options
Printing at full size
Printing at Full Size (Mac OS 9)
This topic describes how to print at full size based on the following example. (Oversized Printing)
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
7.
In D Print Area Setting, click G For printing oversizes.
8.
9.
In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
In the A Page Size list, click the size of the original. In this case, click ISO A4.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
Select the printing application in the F Print Target list.
Enhanced Printing Options 323
Printing at full size
10.
Access the Finishing pane.
11.
12.
Click Roll Paper in the A Media Source list.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case,
ISO A2/A3 (420.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main
pane and update the printer information.
13.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
324 Enhanced Printing Options
Borderless Printing
Borderless Printing
Borderless Printing on Paper of Equivalent Size
Take advantage of borderless printing to print documents such as posters (made up mainly of photos or
images) without a surrounding margin, or border.
Borderless Printing
In regular printing, a margin required by the printer is added around the original. With borderless printing, you
can print documents without the margin, so that the printed image covers the entire surface of the paper.
Important
• Borderless printing is only available with rolls.
• Paper you can use for borderless printing is restricted to particular types of paper and rolls of particular
widths. For information on types of paper compatible with borderless printing, refer to the Paper
Reference Guide. (→P.107)
• If you use an A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.144)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
• Paper incompatible with the printer’s auto cut function can be printed without borders on the left and
right sides only.
• These features cannot be used in combination with borderless printing: special page layouts, centering
originals, and printing cut lines on rolls.
• You cannot have pages rotated 90 degrees to conserve paper if you have set up borderless printing at
actual size or in combination with resizing originals to match the paper size.
• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be
uneven at the edges. If you require higher image quality, specify No in Auto Cut in the printer driver. In
this case, the paper can be printed without borders on the left and right sides only. After ejecting and
cutting the printed document, use scissors to cut away the top and bottom edges.
• By factory default, the ink drying time is disabled for all paper. When you are using paper that takes
longer for ink to adhere for borderless printing and the Cutter Unit touches printing surfaces that are not
dry yet, it may damage the paper or the edge of the document that is cut, depending on frequency of
use. In this case, follow these steps to change the ink drying time.
1. On the Main sheet of the printer driver, click Settings in Media Type.
2. Select the ink drying time in the Between Pages list of Drying Time.
Borderless Printing Method
Choose the method of borderless printing that suits the original, as desired.
Enhanced Printing Options 325
Borderless Printing
Fit Media Size
Enlarge or reduce the original to match the size of the paper you are using.
Note
• The printer driver automatically enlarges originals 3 mm (0.12 in) past the dimensions of the paper on
each side. The 3 mm portion beyond the edge on each side is not printed.
For instructions on borderless printing of photos, images, and other documents to match the paper size, refer
to the following topics, as appropriate for your computer and operating system.
• Borderless Printing by Resizing Originals to Match the Paper Size (Windows) (→P.349)
• Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X) (→P.351)
• Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS 9) (→P.354)
326 Enhanced Printing Options
Borderless Printing
Borderless Printing by Resizing Originals to Fit the Roll
Width
Take advantage of borderless printing to print documents such as posters (made up mainly of photos or
images) without a surrounding margin, or border.
Borderless Printing
In regular printing, a margin required by the printer is added around the original. With borderless printing, you
can print documents without the margin, so that the printed image covers the entire surface of the paper.
Important
• Borderless printing is only available with rolls.
• Paper you can use for borderless printing is restricted to particular types of paper and rolls of particular
widths. For information on types of paper compatible with borderless printing, refer to the Paper
Reference Guide. (→P.107)
• If you use an A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.144)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
• Paper incompatible with the printer’s auto cut function can be printed without borders on the left and
right sides only.
• These features cannot be used in combination with borderless printing: special page layouts, centering
originals, and printing cut lines on rolls.
• You cannot have pages rotated 90 degrees to conserve paper if you have set up borderless printing at
actual size or in combination with resizing originals to match the paper size.
• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be
uneven at the edges. If you require higher image quality, specify No in Auto Cut in the printer driver. In
this case, the paper can be printed without borders on the left and right sides only. After ejecting and
cutting the printed document, use scissors to cut away the top and bottom edges.
• By factory default, the ink drying time is disabled for all paper. When you are using paper that takes
longer for ink to adhere for borderless printing and the Cutter Unit touches printing surfaces that are not
dry yet, it may damage the paper or the edge of the document that is cut, depending on frequency of
use. In this case, follow these steps to change the ink drying time.
1. On the Main sheet of the printer driver, click Settings in Media Type.
2. Select the ink drying time in the Between Pages list of Drying Time.
Borderless Printing Method
Choose the method of borderless printing that suits the original, as desired.
Enhanced Printing Options 327
Borderless Printing
Scale to t Roll Paper Width
Enlarge or reduce the original as a whole to match the roll paper width.
Note
• You can combine this function with rotating pages 90 degrees before printing so that the original width
(relative to portrait orientation) matches the roll paper width in borderless printing.
For instructions on borderless printing of photos, images, and other documents to match the roll paper width,
refer to the following topics, as appropriate for your computer and operating system.
• Borderless Printing by Resizing Originals to Fit the Roll Width (Windows) (→P.340)
• Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X) (→P.342)
• Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS 9) (→P.345)
328 Enhanced Printing Options
Borderless Printing
Borderless Printing at Actual Size
Take advantage of borderless printing to print documents such as posters (made up mainly of photos or
images) without a surrounding margin, or border.
Borderless Printing
In regular printing, a margin required by the printer is added around the original. With borderless printing, you
can print documents without the margin, so that the printed image covers the entire surface of the paper.
Important
• Borderless printing is only available with rolls.
• Paper you can use for borderless printing is restricted to particular types of paper and rolls of particular
widths. For information on types of paper compatible with borderless printing, refer to the Paper
Reference Guide. (→P.107)
• If you use an A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.144)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
• Paper incompatible with the printer’s auto cut function can be printed without borders on the left and
right sides only.
• These features cannot be used in combination with borderless printing: special page layouts, centering
originals, and printing cut lines on rolls.
• You cannot have pages rotated 90 degrees to conserve paper if you have set up borderless printing at
actual size or in combination with resizing originals to match the paper size.
• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be
uneven at the edges. If you require higher image quality, specify No in Auto Cut in the printer driver. In
this case, the paper can be printed without borders on the left and right sides only. After ejecting and
cutting the printed document, use scissors to cut away the top and bottom edges.
• By factory default, the ink drying time is disabled for all paper. When you are using paper that takes
longer for ink to adhere for borderless printing and the Cutter Unit touches printing surfaces that are not
dry yet, it may damage the paper or the edge of the document that is cut, depending on frequency of
use. In this case, follow these steps to change the ink drying time.
1. On the Main sheet of the printer driver, click Settings in Media Type.
2. Select the ink drying time in the Between Pages list of Drying Time.
Borderless Printing Method
Choose the method of borderless printing that suits the original, as desired.
Enhanced Printing Options 329
Borderless Printing
Print Image with Actual Size
Prints originals at actual size, without enlarging or reducing them. Originals must be prepared in a size that
exceeds the dimensions of the paper by 3 mm (0.12 in) on each side.
Note
• Not all page sizes are available.
• Even if you prepare originals of the same size as the paper size, the originals are automatically enlarged
when you print borderlessly in combination with resizing originals to match the paper size. This may
affect image quality. When image quality is most important, make the original 3 mm longer on each side
than the paper size so that the image can be printed at actual size in borderless printing.
For instructions on borderless printing of photos and images at actual size, refer to the following topics, as
appropriate for your computer and operating system.
• Borderless Printing at Actual Size (Windows) (→P.309)
• Borderless Printing at Actual Size (Mac OS X) (→P.311)
• Borderless Printing at Actual Size (Mac OS 9) (→P.314)
330 Enhanced Printing Options
Borderless Printing
Borderless Printing at Actual Size (Windows)
This topic describes how to print borderlessly at actual size based on the following example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.144)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
•
•
•
•
•
1.
Document: Any type
Page size: 10×12 inches (254.0×304.8 mm)
Paper: Roll
Paper type: Heavyweight Coated Paper
Roll paper width: 10 inches (254.0 mm)
Create the original in the source application 3 mm (0.12 in) larger on each side than 254.0×304.8
mm (10 × 12 in) -that is, 260.0×310.8 mm (10.2 × 12.2 in)
Note
• If you can specify the margin, as in Microsoft Word, set the margin at 0 mm. For instructions on
specifying the margin, refer to the software documentation.
• The extra 3 mm (0.12 in) on each side will not be printed. Create the original so that it ts inside the
paper area to be printed on.
2.
3.
4.
Choose Print in the application menu.
5.
In the A Media Type list, select the type of paper that is loaded. In this case, click Heavyweight
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Coated Paper.
6.
Select the print target in the E Print Target list.
Enhanced Printing Options 331
Borderless Printing
7.
Click the Page Setup tab to display the Page Setup sheet.
8.
In the A Page Size list, click the size of the original as specied in the source application.
In this case, click 10"x12".
9.
10.
Click Roll Paper in the L Media Source list.
11.
Select the width of the loaded roll in the Roll Paper Width list-in this case, click 10-in. Roll
Select the B Borderless Printing check box to display the Information dialog box.
(254.0mm).
12.
13.
14.
Click OK to close the Information dialog box.
In C Borderless Printing Method, click F Print Image with Actual Size.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
332 Enhanced Printing Options
Borderless Printing
Borderless Printing at Actual Size (Mac OS X)
This topic describes how to print borderlessly at actual size based on the following example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.144)
The platen may be soiled from borderless printing if you do not attach it.
•
•
•
•
•
Document: Any type
Page size: 10 × 12 inches (254.0×304.8 mm)-Borderless
Paper: Roll
Paper type: Heavyweight Coated Paper
Roll paper width: 10 inches (254.0 mm)
1.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
2.
3.
Select the printer in the B Format for list.
In the C Paper Size list, choose a paper size supported for borderless printing. Here, click
10"x12" - Borderless.
Note
• Paper sizes supported for borderless printing are indicated by “-Borderless.”
4.
5.
6.
7.
Click F OK to close the dialog box.
In the application, create an original that takes up the entire space of the paper size.
Choose Print in the application menu.
Access the Main pane.
Enhanced Printing Options 333
Borderless Printing
8.
In the A Media Type list, select the type of paper that is loaded. In this case, click Heavyweight
Coated Paper.
9.
10.
Select the print target in the E Print Target list.
11.
12.
Click Roll Paper in the A Media Source list.
Access the Page Setup pane.
Conrm that the roll paper width matches the paper size.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10
in. (254.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on
the Main pane and update the printer information.
334 Enhanced Printing Options
Borderless Printing
13.
Make sure the C Page Size setting matches the original size as selected in C Paper Size in the
Page Attribute dialog box-in this case, 10"x12" - Borderless.
14.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
Enhanced Printing Options 335
Borderless Printing
Borderless Printing at Actual Size (Mac OS 9)
This topic describes how to print borderlessly at actual size based on the following example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.144)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
•
•
•
•
•
Document: Any type
Page size: 10 × 12 inches (254.0×304.8 mm)-Borderless
Paper: Roll
Paper type: Heavyweight Coated Paper
Roll width: 10 inches (254.0 mm)
1.
2.
Select the printer in Chooser.
3.
4.
In D Print Area Setting, click H For Broderless Printing.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
In the A Page Size list, choose a paper size supported for borderless printing. Here, click
10"x12" - Borderless.
Note
• Paper sizes supported for borderless printing are indicated by “-Borderless.”
5.
6.
7.
Click I OK to close the dialog box.
In the application, create an original that takes up the entire space of the paper size.
Choose Print in the application menu.
336 Enhanced Printing Options
Borderless Printing
8.
Make sure the Main pane is displayed.
9.
In the C Media Type list, select the type of paper that is loaded. In this case, click Heavyweight
Coated Paper.
10.
11.
Select the print target in the F Print Target list.
12.
Click Roll Paper in the A Media Source list.
Access the Finishing pane.
Enhanced Printing Options 337
Borderless Printing
13.
Conrm that the roll paper width matches the paper size.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10
in. (254.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main
pane and update the printer information.
14.
Access the Page Setup pane.
338 Enhanced Printing Options
Borderless Printing
15.
Make sure the B Page Size setting matches the original size as selected in A Page Size in the
Page Attribute dialog box-in this case, 10"x12".
16.
Conrm the print settings, and click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
Enhanced Printing Options 339
Borderless Printing
Borderless Printing by Resizing Originals to Fit the Roll
Width (Windows)
This topic describes how to enlarge originals before borderless printing to match the roll width, based on the
following example.
If you use n A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the Roll
Holder. (→P.144)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
•
•
•
•
•
1.
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Heavyweight Coated Paper
Roll paper width: 10 inches (254.0 mm)
In the application, create an original that takes up the entire space of the paper size.
Note
• If you can specify the margin, as in Microsoft Word, set the margin at 0 mm. For instructions on
specifying the margin, refer to the software documentation.
2.
3.
4.
Choose Print in the application menu.
5.
In the A Media Type list, select the type of paper that is loaded. In this case, click Heavyweight
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Coated Paper.
6.
Select the print target in the E Print Target list.
340 Enhanced Printing Options
Borderless Printing
7.
Click the Page Setup tab to display the Page Setup sheet.
8.
In the A Page Size list, click the size of the original as specied in the application. In this case,
click ISO A4 or Letter (8.5"x11").
9.
10.
Click Roll Paper in the L Media Source list.
11.
Select the width of the loaded roll in the Roll Paper Width list-in this case, click 10-in. Roll
Select the B Borderless Printing check box to display the Information dialog box.
(254.0mm).
12.
13.
14.
Click OK to close the Information dialog box.
In C Borderless Printing Method, make sure E Scale to t Roll Paper Width is selected.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
Enhanced Printing Options 341
Borderless Printing
Borderless Printing by Resizing Originals to Fit the Roll
Width (Mac OS X)
This topic describes how to enlarge originals before printing to match the roll width, based on the following example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.144)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Heavyweight Coated Paper
Roll paper width: 10 inches (254.0 mm)
1.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
2.
3.
Select the printer in the B Format for list.
In C Paper Size, click the size of the original. In this case, click ISO A4.
Note
• All sizes are available in borderless printing if you resize originals to t the roll width.
4.
5.
6.
7.
Click F OK to close the dialog box.
In the application, create an original that takes up the entire space of the paper size.
Choose Print in the application menu.
Access the Main pane.
342 Enhanced Printing Options
Borderless Printing
8.
In the A Media Type list, select the type of paper that is loaded. In this case, click Heavyweight
Coated Paper.
9.
10.
Select the print target in the E Print Target list.
11.
12.
Click Roll Paper in the A Media Source list.
Access the Page Setup pane.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-here, 10
in. (254.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on
the Main pane and update the printer information.
Enhanced Printing Options 343
Borderless Printing
13.
Make sure the C Page Size setting matches the original size as selected in C Paper Size in the
Page Attribute dialog box-in this case, ISO A4.
14.
15.
Select the D Enlarged/Reduced Printing check box.
Select the H Borderless Printing check box.
This ensures that F Fit Roll Paper Width is automatically selected in D Enlarged/Reduced
Printing.
16.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
344 Enhanced Printing Options
Borderless Printing
Borderless Printing by Resizing Originals to Fit the Roll
Width (Mac OS 9)
This topic describes how to enlarge originals before printing to match the roll width, based on the following example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.144)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Heavyweight Coated Paper
Roll width: 10 inches (254.0 mm)
1.
2.
Select the printer in Chooser.
3.
In A Page Size, click the size of the original. In this case, click ISO A4.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Note
• All sizes are available in borderless printing if you resize originals to t the roll width.
4.
5.
6.
Click I OK to close the dialog box.
In the application, create an original that takes up the entire space of the paper size.
Choose Print in the application menu.
Enhanced Printing Options 345
Borderless Printing
7.
Make sure the Main pane is displayed.
8.
In the C Media Type list, select the type of paper that is loaded. In this case, click Heavyweight
Coated Paper.
9.
10.
Select the print target in the F Print Target list.
11.
Click Roll Paper in the A Media Source list.
Access the Finishing pane.
346 Enhanced Printing Options
Borderless Printing
12.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10
in. (254.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main
pane and update the printer information.
13.
Access the Page Setup pane.
Enhanced Printing Options 347
Borderless Printing
14.
Make sure the B Page Size setting matches the original size as selected in A Page Size in the
Page Attribute dialog box-in this case, ISO A4.
15.
16.
Select the C Enlarged/Reduced Printing check box.
Select the G Borderless Printing check box.
This ensures that E Fit Roll Paper Width is automatically selected in C Enlarged/Reduced
Printing.
17.
Conrm the print settings, and click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
348 Enhanced Printing Options
Borderless Printing
Borderless Printing by Resizing Originals to Match the
Paper Size (Windows)
This topic describes how to enlarge originals before borderless printing to match the paper size, based on the
following example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.144)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
•
•
•
•
•
1.
Document: Any type
Page size: 10×12 inches (254.0×304.8 mm)
Paper: Roll
Paper type: Heavyweight Coated Paper
Roll paper width: 10 inches (254.0 mm)
In the application, create an original that takes up the entire space of the paper size.
Note
• If you can specify the margin, as in Microsoft Word, set the margin at 0 mm. For instructions on
specifying the margin, refer to the software documentation.
2.
3.
4.
Choose Print in the application menu.
5.
In the A Media Type list, select the type of paper that is loaded. In this case, click Heavyweight
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Coated Paper.
6.
Select the print target in the E Print Target list.
Enhanced Printing Options 349
Borderless Printing
7.
Click the Page Setup tab to display the Page Setup sheet.
8.
In the A Page Size list, click the size of the original as specied in the application. In this case,
click 10"x12".
9.
10.
Click Roll Paper in the L Media Source list.
11.
Select the width of the loaded roll in the Roll Paper Width list-in this case, click 10-in. Roll
Select the B Borderless Printing check box to display the Information dialog box.
(254.0mm).
12.
13.
14.
15.
Click OK to close the Information dialog box.
In C Borderless Printing Method, click D Fit Media Size.
Click Match Page Size in the G Media Size list.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
350 Enhanced Printing Options
Borderless Printing
Borderless Printing by Resizing Originals to Match the
Paper Size (Mac OS X)
This topic describes how to enlarge originals before borderless printing to match the paper size, based on the
following example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.144)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
•
•
•
•
•
Document: Any type
Page size: 10×12 inches (254.0×304.8 mm)
Paper: Roll
Paper type: Heavyweight Coated Paper
Roll paper width: 10 inches (254.0 mm)
1.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
2.
3.
Select the printer in the B Format for list.
In the C Paper Size list, click the size of the original. In this case, click 10"x12".
Note
• All sizes are available in borderless printing if you resize originals to match the paper size.
4.
5.
6.
7.
Click F OK to close the dialog box.
In the application, create an original that takes up the entire space of the paper size.
Choose Print in the application menu.
Access the Main pane.
Enhanced Printing Options 351
Borderless Printing
8.
In the A Media Type list, select the type of paper that is loaded. In this case, click Heavyweight
Coated Paper.
9.
10.
Select the print target in the E Print Target list.
11.
12.
Click Roll Paper in the A Media Source list.
Access the Page Setup pane.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10
in. (254.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on
the Main pane and update the printer information.
352 Enhanced Printing Options
Borderless Printing
13.
Make sure the C Page Size setting matches the original size as selected in C Paper Size in the
Page Attribute dialog box-in this case, 10"x12".
14.
15.
16.
17.
18.
Select the D Enlarged/Reduced Printing check box.
Select the H Borderless Printing check box.
Click E Fit Media Size under D Enlarged/Reduced Printing.
In I Media Size, click the paper size. In this case, click 10"x12" - Borderless.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
Enhanced Printing Options 353
Borderless Printing
Borderless Printing by Resizing Originals to Match the
Paper Size (Mac OS 9)
This topic describes how to enlarge originals before borderless printing to match the paper size, based on the
following example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.144)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
•
•
•
•
•
Document: Any type
Page size: 10×12 inches (254.0×304.8 mm)
Paper: Roll
Paper type: Heavyweight Coated Paper
Roll width: 10 inches (254.0 mm)
1.
2.
Select the printer in Chooser.
3.
In the A Page Size list, click the size of the original. In this case, click 10"x12".
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Note
• All sizes are available in borderless printing if you resize originals to match the paper size.
4.
5.
6.
Click I OK to close the dialog box.
In the application, create an original that takes up the entire space of the paper size.
Choose Print in the application menu.
354 Enhanced Printing Options
Borderless Printing
7.
Make sure the Main pane is displayed.
8.
In the C Media Type list, select the type of paper that is loaded. In this case, click Heavyweight
Coated Paper.
9.
10.
Select the print target in the F Print Target list.
11.
Click Roll Paper in the A Media Source list.
Access the Finishing pane.
Enhanced Printing Options 355
Borderless Printing
12.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10
in. (254.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main
pane and update the printer information.
13.
Access the Page Setup pane.
356 Enhanced Printing Options
Borderless Printing
14.
Make sure the B Page Size setting matches the original size as selected in A Page Size in the
Page Attribute dialog box-in this case, 10"x12".
15.
16.
17.
18.
19.
Select the C Enlarged/Reduced Printing check box.
Select the G Borderless Printing check box.
Click D Fit Media Size under C Enlarged/Reduced Printing.
In H Media Size, click the paper size. In this case, click 10"x12" - Borderless.
Conrm the print settings, and click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
Enhanced Printing Options 357
Printing banners or at other non-standard sizes
Printing banners or at other non-standard
sizes
Printing Vertical or Horizontal Banners (Large-Format
Printing)
You can create vertical or horizontal banners by printing originals that are in banner format on rolls.
Originals created in Microsoft Word or other applications in your preferred size can be enlarged to ll the width
of roll paper by completing simple printer driver settings.
Fit Roll Paper Width
You can easily create vertical or horizontal banners by automatically enlarging or reducing originals to t the
full width of rolls.
Note
• The maximum supported roll length is 18.0 m or 19.7 yd (when printing in Mac OS X).
For instructions on printing vertical or horizontal banners, refer to the following topics, as appropriate for
your computer and operating system.
• Printing Vertical or Horizontal Banners (Large-Format Printing; Windows) (→P.369)
• Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X) (→P.373)
• Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS 9) (→P.376)
Important
• Before printing, check how much of the roll paper is left. If you have activated automatic detection of the
remaining roll paper, a warning message is displayed when there is not enough roll paper left.
• If not much ink is left, prepare replacement ink tanks.
• To print at a higher level of quality, in the printer driver, choose High or Highest in Print Quality, and
choose Unidirectional Printing as the direction of printing.
358 Enhanced Printing Options
Printing banners or at other non-standard sizes
Printing on Non-Standard Paper Sizes
By specifying the paper size, you can print on non-standard sizes of paper.
There are two ways to print on non-standard paper sizes, as follows.
Registering non-standard paper size in the printer driver
After you register non-standard paper sizes, they are listed with standard sizes so that you can choose
them anytime as needed.
Note
• These non-standard paper sizes you register on the printer are called Custom Media Size in Windows
and Mac OS 9. In Mac OS X, paper sizes you register in the printer driver are called “Custom Sizes.”
• Non-standard sizes cannot be registered on the printer when the media source is set to Cassette.
Specifying custom media sizes for temporary use
Because these are sizes you specify temporarily in the printer driver, the sizes will not be available after you
exit the application. If you want to set up a non-standard paper size so that it will always be available, we
recommend registering the paper size in the printer driver.
Note
• These temporary paper sizes you register on the printer are called “Custom Sizes” in Windows.
• Non-standard sizes cannot be registered on the printer when the media source is set to Cassette.
For instructions on specifying non-standard paper sizes for printing, refer to the following topics, as
appropriate for your computer and operating system.
• Printing on Non-Standard Paper Sizes (Windows) (→P.360)
• Printing on Non-Standard Paper Sizes (Mac OS X) (→P.364)
• Printing on Non-Standard Paper Sizes (Mac OS 9) (→P.366)
Enhanced Printing Options 359
Printing banners or at other non-standard sizes
Printing on Non-Standard Paper Sizes (Windows)
This topic describes two ways to print on non-standard paper sizes.
• Printing by using Custom Size (→P.360)
• Printing by using Custom Media Size (→P.361)
Printing by using Custom Size
This section describes how to print using Custom Size based on the following example.
•
•
•
•
•
Document: Scanned image
Page size: Square of non-standard dimensions (430×430 mm [16.9×16.9 in])
Paper: Sheets ( Manual )
Paper type: Plain Paper
Paper size: A square sheet (430×430 mm [16.9×16.9 in])
1.
2.
3.
4.
Load the square paper (430×430 mm [16.9×16.9 in]) in the Top Paper Feed Slot.
5.
6.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Choose Print in the source application menu.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
After conrming that D Easy Settings is selected, click Scanned Image in the E Print Target
list.
360 Enhanced Printing Options
Printing banners or at other non-standard sizes
7.
8.
9.
10.
Click the Page Setup tab to display the Page Setup sheet.
Click Manual in the L Media Source list.
Click Custom Size in the A Page Size list to display the Custom Size Settings dialog box.
Complete the following settings in the Custom Size Settings dialog box.
1. Select mm or inch in Units.
2. Enter “430” [16.9 in] in both Width and Height.
11.
12.
Click OK to close the Custom Size Settings dialog box.
Conrm the print settings and print as desired.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
Printing by using Custom Media Size
This section describes how to print using Custom Media Size based on the following example. First, register
a non-standard paper size called “430 mm Square” as a Custom Media Size.
•
•
•
•
•
1.
2.
3.
Document: Scanned image
Page size: A square sheet (430×430 mm [16.9×16.9 in])
Paper: Sheets ( Manual )
Paper type: Plain Paper
Paper size: A square sheet (430×430 mm [16.9×16.9 in])
Load the square paper (430×430 mm [16.9×16.9 in]) in the Top Paper Feed Slot.
Choose Print in the source application menu.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Enhanced Printing Options 361
Printing banners or at other non-standard sizes
4.
Make sure the Main sheet is displayed.
5.
6.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
After conrming that D Easy Settings is selected, click Scanned Image in the E Print Target
list.
7.
Click the Page Setup tab to display the Page Setup sheet.
8.
9.
Click O Size Options to display the Media Size Options dialog box.
Complete the following settings in the Media Size Options dialog box.
1. Enter a desired paper name in Custom Media Size Name. “430 mm Square” is used in this example.
2. Select mm or inch in Units.
3. Enter “430” [16.9 in] in both Width and Height.
Note
• If you select the Fix the Ratio of the Width to Height check box, after you enter a value in either
Width or Height, the other value will be automatically applied based on the original aspect ratio.
362 Enhanced Printing Options
Printing banners or at other non-standard sizes
10.
11.
12.
13.
14.
Click Add to register “430 mm Square.”
Click OK to close the Media Size Options dialog box.
Click Manual in the L Media Source list.
In the A Page Size list, click the size you added, "430 mm Square."
Conrm the print settings and print as desired.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
Enhanced Printing Options 363
Printing banners or at other non-standard sizes
Printing on Non-Standard Paper Sizes (Mac OS X)
This topic describes how to print after registering “Custom Media Size” based on the following example. Here, you
will register a non-standard paper size named “430*430” in “Custom Media Size”.
•
•
•
•
•
Document: Scanned image
Page size: A square sheet (430×430 mm [16.9×16.9 in])
Paper: Sheets ( Manual )
Paper type: Plain Paper
Paper size: A square sheet (430×430 mm [16.9×16.9 in])
Note
• The following procedures are based on Mac OS X 10.4. The method of setting up non-standard paper
sizes varies depending on the version of Mac OS X.
1.
2.
3.
Create the document in the application.
4.
5.
Select the printer in the B Format for list.
Load the square paper (430×430 mm [16.9×16.9 in]) in the Top Paper Feed Slot.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click Manage Custom Sizes in the C Paper Size list to display the Custom Page Sizes
dialog box.
6.
In Page Size, enter the height and width of the original. Here, enter “43.00 cm” in Height and
Width.
7.
In Printer Margins, enter “0.3” for the top and side margins and “2.3” for the bottom margin.
Here, measurements are entered in centimeters.
8.
Double-click Untitled in the list at left in the Custom Page Sizes dialog box and enter the
paper name-in this case, “430*430”.
9.
10.
Click OK to close the Custom Page Sizes dialog box.
In the C Paper Size list, click the size of the original. In this case, click “430*430”, the size
you registered.
11.
12.
Click F OK to close the dialog box.
Choose Print in the application menu.
364 Enhanced Printing Options
Printing banners or at other non-standard sizes
13.
Access the Main pane.
14.
15.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
After conrming that D Easy Settings is selected, click Scanned Image in the E Print Target
list.
16.
Access the Page Setup pane.
17.
18.
19.
Click Manual in the A Media Source list.
In D Easy Settings, make sure “430*430” is displayed, as registered in Page Setup.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
Enhanced Printing Options 365
Printing banners or at other non-standard sizes
Printing on Non-Standard Paper Sizes (Mac OS 9)
This topic describes how to print using Custom Media Size based on the following example. Here, you will
register a non-standard paper size named “430*430” in Custom Media Size.
•
•
•
•
•
Document: Scanned image
Page size: A square sheet (430×430 mm [16.9×16.9 in])
Paper: Sheets ( Manual )
Paper type: Plain Paper
Paper size: A square sheet (430×430 mm [16.9×16.9 in])
1.
2.
3.
4.
Create the document in the application.
5.
Click Media Design in the Page Attribute list to display the Media Design pane.
6.
7.
Enter a paper name of your choice in B Custom Name. “430*430” is used in this example.
Load the square paper (430×430 mm [16.9×16.9 in]) in the Top Paper Feed Slot.
Select the printer in Chooser.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
In F Media Size, enter the height and width of the original. Here, enter “430” in H Hght and G
Wid..
8.
Click J Add to add the paper size named “430*430”.
366 Enhanced Printing Options
Printing banners or at other non-standard sizes
9.
10.
Access the Page Attribute dialog box.
In the A Page Size list, click the size of the original. In this case, click “430*430”, the size
you registered.
11.
12.
13.
14.
In D Print Area Setting, click F For Manual printing.
15.
16.
In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
After conrming that E Easy Settings is selected, click Scanned Image in the F Print Target list.
Enhanced Printing Options 367
Printing banners or at other non-standard sizes
17.
Access the Finishing pane.
18.
19.
Click Manual in the A Media Source list.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
368 Enhanced Printing Options
Printing banners or at other non-standard sizes
Printing Vertical or Horizontal Banners (Large-Format
Printing; Windows)
This topic describes how to print a banner about ve times as long as the roll width based on the following example.
•
•
•
•
•
Document: A horizontal banner created in Microsoft Word
Page size: Non-standard (100×500 mm [3.9×19.7 in])
Paper: Roll
Paper type: Plain Paper
Roll paper width: 16 in (406.4 mm)
Follow the steps below to print a banner in either horizontal or vertical format.
1. Register a Custom Media Size.
Banners tend to be in non-standard sizes, so register a Custom Media Size. In this example, 100×500
mm (3.9×19.7 in) is registered.
2. In the application, create an original in the size you registered.
3. Print the banner, using the settings that correspond to banners.
Registering a Custom Media Size
This example describes how to register a paper size that is horizontally elongated and suitable for banners in
either horizontal or vertical format.
1.
2.
Display the printer driver dialog box. (→P.499)
3.
4.
5.
Click Roll Paper in the L Media Source list.
Click the Page Setup tab to display the Page Setup sheet.
Click O Size Options to display the Media Size Options dialog box.
Enter a desired paper name in Custom Media Size Name. “My Horizontal Banner” is used
in this example.
6.
7.
8.
9.
In Units, click mm.
Under Media Size, enter “100” in Width and “500” in Height.
Click Add to add the paper size of “My Horizontal Banner.”
Click OK to close the Media Size Options dialog box.
Enhanced Printing Options 369
Printing banners or at other non-standard sizes
10.
Close the printer driver dialog box.
Note
• You can also specify a Custom Size as the paper size. Note that Custom Size settings are not
available after you exit the application.
For more information, see “Printing on Non-Standard Paper Sizes (Windows)”. (→P.360)
Creating the banner in the application
Follow the steps below to create the banner in Microsoft Word using the Custom Media Size you registered.
1.
2.
3.
Start Microsoft Word.
Choose Page Setup from the File menu to display the Page Setup dialog box.
Under Paper Size, click the Custom Media Size you registered-"My Horizontal Banner" in this
example.
Important
• If "My Horizontal Banner" is not listed, make sure this printer is selected as the printer to use.
• In applications such as Microsoft PowerPoint that do not enable you to choose registered paper
sizes, use the custom paper size setting in “Custom” and specify 100×500 mm (3.9×19.7 in)
4.
5.
Set the printing orientation to horizontal
Create the banner.
Printing the banner
Follow the steps below to print the banner using the corresponding banner settings.
1.
2.
3.
Choose Print in the Microsoft Word menu.
4.
5.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the printer in the dialog box, and then open the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
After conrming that D Easy Settings is selected, click POP Ad in the E Print Target list.
370 Enhanced Printing Options
Printing banners or at other non-standard sizes
6.
Click the Page Setup tab to display the Page Setup sheet.
7.
8.
In the A Page Size list, click the size you registered, "My Horizontal Banner."
Select the C Enlarged/Reduced Printing check box.
Note
• If the Enlarged/Reduced Printing check box is not displayed on the Page Setup sheet, clear the
B Borderless Printing check box.
9.
10.
11.
Click Roll Paper in the L Media Source list.
After you click E Fit Roll Paper Width, the Information dialog box is displayed.
Select the width of the loaded roll in the Roll Paper Width list. In this case, click 16-in. Roll
(406.4mm), and then click OK.
Enhanced Printing Options 371
Printing banners or at other non-standard sizes
12.
Conrm the print settings and print as desired.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
Note
• If printing is unsuccessful, you may be able to print after completing the following setting.
1. On the Layout sheet, click M Special Settings to display the Special Settings dialog box.
2. In the FineZoom Settings list, click Yes.
372 Enhanced Printing Options
Printing banners or at other non-standard sizes
Printing Vertical or Horizontal Banners (Large-Format
Printing; Mac OS X)
This topic describes how to print a banner about ve times as long as the roll width based on the following example.
•
•
•
•
•
Document: An original designed for a horizontal banner
Page Size: Non-standard (100×500 mm [3.9×19.7 in])
Paper: Roll
Paper type: Plain Paper
Roll paper width: 16 inches (406.4 mm)
Follow the steps below to print a banner in either horizontal or vertical format.
1. In the application, create an original in the format of a horizontal or vertical banner.
2. Register a “Custom Page Size.”
Banners tend to be in non-standard sizes, so register a “Custom Page Size” in Page Setup. In this
example, 100×500 mm (3.9×19.7 in) is registered.
3. Print the banner, using the settings that correspond to banners.
Note
• The following procedures are based on Mac OS X 10.4. The method of setting up non-standard paper
sizes varies depending on the version of Mac OS X.
Register a Custom Page Size
This example describes how to register and print using a page size that is horizontally elongated and suitable
for banners in either horizontal or vertical format.
1.
2.
Create the document in the application.
3.
4.
Select the printer in the B Format for list.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click Manage Custom Sizes in the C Paper Size list to display the Custom Page Sizes
dialog box.
5.
Double-click Untitled in the list at left, and then enter a name for the page size you want
to register. Here, enter “100*500.”
If the Untitled size is not listed at left, click + below the list.
6.
Under Page Size, enter “10” in Width and “50” in Height. Here, measurements are entered
in centimeters.
7.
Specify the margins by entering “0.3” in Printer Margins. Here, too, measurements are entered
in centimeters.
8.
Click OK to close the Custom Page Sizes dialog box.
Enhanced Printing Options 373
Printing banners or at other non-standard sizes
9.
In the C Paper Size list, click the size of the original. In this case, click "100*500", the size
you registered.
10.
11.
In D Orientation, click the icon of the document in landscape orientation.
Click F OK to close the dialog box.
Print the banner
Follow the steps below to print the banner using the corresponding banner settings.
1.
2.
Choose Print in the application menu.
3.
4.
5.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
6.
Click Roll Paper in the A Media Source list.
Access the Main pane.
After conrming that D Easy Settings is selected, click POP in the E Print Target list.
Access the Page Setup pane.
374 Enhanced Printing Options
Printing banners or at other non-standard sizes
7.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 16
in. (406.4mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on
the Main pane and update the printer information.
8.
9.
10.
11.
In C Page Size, make sure "100*500" is displayed, as registered in Page Setup.
Select the D Enlarged/Reduced Printing check box.
Click F Fit Roll Paper Width.
Conrm the print settings, and click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
Enhanced Printing Options 375
Printing banners or at other non-standard sizes
Printing Vertical or Horizontal Banners (Large-Format
Printing; Mac OS 9)
This topic describes how to print a banner about ve times as long as the roll width based on the following example.
•
•
•
•
•
Document: An original designed for a horizontal banner
Page size: Non-standard (100×500 mm, [3.9×19.7 in])
Paper: Roll
Paper type: Plain Paper
Roll paper width: 10 inches (254.0 mm)
The steps to print a vertical or horizontal banner are as follows.
1. In the application, create an original in the format of a horizontal or vertical banner.
2. Register a Custom Media Size in Media Design.
Banners tend to be in non-standard sizes, so register a Custom Media Size. In this example, 100×500
mm (3.9×19.7 in) is registered.
3. Print the banner, using the settings that correspond to banners.
Register a Custom Media Size
This example describes how to register and print using a page size that is horizontally elongated and suitable
for banners in either horizontal or vertical format.
1.
2.
3.
Create the document in the application.
4.
Click Media Design in the Page Attribute list to display the Media Design pane.
5.
6.
7.
8.
Enter a desired paper name in B Custom Name. “My Horizontal Banner” is used in this example.
Select the printer in Chooser.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
In C Units, click D mm.
Under F Media Size, enter “100” in G Wid. and “500” in H Hght.
Click J Add to add the paper size of “My Horizontal Banner.”
376 Enhanced Printing Options
Printing banners or at other non-standard sizes
9.
10.
11.
12.
Access the Page Attribute dialog box.
In the A Page Size list, click the size you added, “My Horizontal Banner.”
In B Orientation, click the icon of the document in landscape orientation.
Click I OK to close the dialog box.
Print the banner
Follow these steps to print the banner using the corresponding banner settings.
1.
2.
Choose Print in the application menu.
3.
4.
In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Make sure the Main pane is displayed.
After conrming that E Easy Settings is selected, click POP in the F Print Target list.
Enhanced Printing Options 377
Printing banners or at other non-standard sizes
5.
Access the Finishing pane.
6.
7.
Click Roll Paper in the A Media Source list.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10
in. (254.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main
pane and update the printer information.
378 Enhanced Printing Options
Printing banners or at other non-standard sizes
8.
9.
10.
11.
12.
Access the Page Setup pane.
In B Page Size, make sure “My Horizontal Banner” is displayed, as registered in Media Design.
Select the C Enlarged/Reduced Printing check box.
Click E Fit Roll Paper Width.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
Enhanced Printing Options 379
Tiling and multiple pages per sheet
Tiling and multiple pages per sheet
Printing Multiple Originals Next to Each Other
By arranging originals from word-processing or spreadsheet programs or web browser screen shots next to
each other on single sheets, you can create highly expressive presentation materials, easy-to-understand
meeting materials, and a variety of other printed documents.
Free Layout (Windows)
Besides combining multiple pages in a single-page layout, you can combine originals from multiple les-even
multiple source applications-in a single-page layout.
380 Enhanced Printing Options
Tiling and multiple pages per sheet
imagePROGRAF Free Layout (Macintosh)
Besides combining multiple pages in a single-page layout, you can combine originals from multiple les-even
multiple source applications-in a single-page layout.
Important
• The driver must be installed from the User Software CD-ROM to use this function.
For instructions on arranging originals from multiple applications, refer to the following topics.
• Printing Multiple Originals Next to Each Other (Windows) (→P.389)
• Printing Multiple Originals Next to Each Other (Mac OS X) (→P.391)
Enhanced Printing Options 381
Tiling and multiple pages per sheet
Printing Multiple Pages Continuously
You can print multiple pages as a single continuous image, without margins between pages.
Roll paper (banner)
Important
• This feature is only available with rolls. It cannot be used when printing on sheets.
• During banner printing, settings for conserving paper, number of copies, borderless printing,
enlargement or reduction, and other layout-related settings are disregarded.
For instructions on borderless printing of photos and images at actual size, refer to the following topics, as
appropriate for your computer and operating system.
• Printing Multiple Pages Continuously (Windows) (→P.393)
• Printing Multiple Pages Continuously (Mac OS X) (→P.394)
• Printing Multiple Pages Continuously (Mac OS 9) (→P.396)
382 Enhanced Printing Options
Tiling and multiple pages per sheet
Printing Multiple Pages Per Sheet
To conserve paper, you can print several pages of the original on a single sheet by reducing the original
and dividing the sheet into areas for each page.
Page Layout
Specify a number of pages of the original to print on a single sheet, in a layout of multiple pages per sheet.
Note
• You can print up to 16 pages of the original on a single sheet.
• You can also change the page layout order and print page boundary lines, as desired.
Important
• This function cannot be combined with the following options.
• Borderless Printing
• Resizing to Fit the Roll Width (Windows)
• Scaling Originals (Windows)
• Banner Printing (Windows)
For instructions on printing multiple pages per sheet, refer to the following topics, as appropriate for your
computer and operating system.
• Printing Multiple Pages Per Sheet (Windows) (→P.398)
• Printing Multiple Pages Per Sheet (Mac OS X) (→P.400)
• Printing Multiple Pages Per Sheet (Mac OS 9) (→P.403)
Enhanced Printing Options 383
Tiling and multiple pages per sheet
Printing Posters in Sections
You can enlarge an original to print it in sections on several sheets. By assembling the printed sheets, you
can create a poster larger than the maximum supported paper size of the printer.
Page Layout
Choose poster printing.
For instructions on printing large posters, refer to the following topics, as appropriate for your computer
and operating system.
• Printing Large Posters (Windows) (→P.385)
• Printing Large Posters (Mac OS 9) (→P.387)
Note
• This method of poster printing is supported in Windows and Mac OS 9.
384 Enhanced Printing Options
Tiling and multiple pages per sheet
Printing Large Posters (Windows)
You can enlarge an original to print it in sections on several sheets. By assembling the printed sheets, you can
create a poster larger than the maximum supported paper size of the printer. This topic describes how to enlarge
an A2 original for printing it in sections on four sheets, based on the following example.
•
•
•
•
•
Document: Poster
Page size: A2 (420.0×594.0 mm [16.5 × 23.4 in])
Paper: Sheets ( Manual )
Paper Type: Glossy Paper
Paper size: A2 (420.0×594.0 mm [16.5 × 23.4 in])
1.
2.
3.
Choose Print in the application menu.
4.
5.
6.
In the A Media Type list, select the type of paper that is loaded. In this case, click Glossy Paper.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Click Poster (Graphic Image) in the E Print Target list.
Click the Page Setup tab to display the Page Setup sheet.
Enhanced Printing Options 385
Tiling and multiple pages per sheet
7.
In A Page Size, click the size of the original as specied in the application. In this case, click
ISO A2.
8.
9.
10.
11.
Click Manual in the L Media Source list.
Click the Layout tab to display the Layout sheet.
Select the A Page Layout check box.
Click Poster (2 x 2) in the B Page Layout list.
Note
• Follow the steps below to print only a portion of the poster as divided for printing.
1. Click C Set under B Page Layout to display the Pages to Print dialog box.
2. On the Pages to Print dialog box, clear the check boxes of the portion you do not want to print.
3. Click OK to close the Pages to Print dialog box.
12.
Conrm the print settings and print as desired.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
386 Enhanced Printing Options
Tiling and multiple pages per sheet
Printing Large Posters (Mac OS 9)
You can enlarge an original to print it in sections on several sheets. By assembling the printed sheets, you can
create a poster larger than the maximum supported paper size of the printer. This topic describes how to enlarge
an A2 original for printing on four sheets of paper based on the following example.
•
•
•
•
•
Document: Poster
Page size: A2 (420.0×594.0 mm [16.5 × 23.4 in])
Paper: Sheets ( Manual )
Paper type: Glossy Paper
Paper size: A2 (420.0×594.0 mm [16.5 × 23.4 in])
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
7.
In the A Page Size list, click the size of the original. In this case, click ISO A2.
8.
In the C Media Type list, select the type of paper that is loaded. In this case, click Glossy Paper.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
In D Print Area Setting, click F For Manual printing.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
Enhanced Printing Options 387
Tiling and multiple pages per sheet
9.
After conrming that E Easy Settings is selected, click Poster (Graphic Image) in the F Print
Target list.
10.
Access the Page Setup pane.
11.
12.
13.
14.
Select the I Page Layout check box.
15.
16.
Click Paper Tray Feed in the A Media Source list.
Click Poster (2 x 2) in the I Page Layout list.
In the Pages to Print dialog box, clear the check boxes of any portion you do not want to print.
Access the Finishing pane.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
388 Enhanced Printing Options
Tiling and multiple pages per sheet
Printing Multiple Originals Next to Each Other (Windows)
This topic describes how to arrange multiple originals using the Free Layout function.
1.
2.
3.
Choose Print in the application menu.
4.
Click the Layout tab to display the Layout sheet.
5.
6.
Select the A Page Layout check box.
Select the printer in the dialog box, and then open the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Click Free Layout in the B Page Layout list.
Enhanced Printing Options 389
Tiling and multiple pages per sheet
7.
When you attempt to print, the imagePROGRAF Free Layout window is displayed. (At this
point, the document will not be printed yet.)
8.
Edit and rearrange the image in the imagePROGRAF Free Layout window as desired.
Important
• Without closing the imagePROGRAF Free Layout window, repeat steps 1-7 to arrange originals
from multiple applications on the same page.
Note
• For instructions on editing and rearranging images, refer to the imagePROGRAF Free Layout
help topic.
9.
Print from the imagePROGRAF Free Layout menu.
Note
• For details on imagePROGRAF Free Layout functions, refer to Free Layout Guide .
390 Enhanced Printing Options
Tiling and multiple pages per sheet
Printing Multiple Originals Next to Each Other (Mac OS X)
This topic describes how to use the Free Layout function to arrange multiple originals next to each other before
printing.
1.
2.
Choose Print in the application menu.
3.
The Canon imagePROGRAF Free Layout window is displayed.
Click PDF and select Canon imagePROGRAF Free Layout.
Enhanced Printing Options 391
Tiling and multiple pages per sheet
4.
Edit and rearrange the image in the Canon imagePROGRAF Free Layout window as desired.
Important
• Without closing the Canon imagePROGRAF Free Layout window, repeat steps 1-7 to arrange
originals from multiple applications on the same page.
Note
• For instructions on editing and rearranging images, refer to the Canon imagePROGRAF Free
Layout help topic.
5.
Print from the Canon imagePROGRAF Free Layout menu.
Note
• For details on Canon imagePROGRAF Free Layout functions, refer to Free Layout Guide .
392 Enhanced Printing Options
Tiling and multiple pages per sheet
Printing Multiple Pages Continuously (Windows)
This topic describes how to print multiple pages as a single continuous image, without margins between pages.
Important
• This feature is only available with rolls. It cannot be used when printing on sheets.
• During banner printing, settings for conserving paper, number of copies, borderless printing,
enlargement or reduction, and other layout-related settings are disregarded.
1.
2.
3.
Choose Print in the application menu.
4.
5.
In the A Media Type list, click the type of paper that is loaded.
6.
7.
Click Roll Paper (Banner) in the L Media Source list.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Click the Page Setup tab to display the Page Setup sheet.
Conrm the print settings and start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
Enhanced Printing Options 393
Tiling and multiple pages per sheet
Printing Multiple Pages Continuously (Mac OS X)
This topic describes how to print multiple pages as a single continuous image, without margins between pages.
Important
• This feature is only available with rolls. It cannot be used when printing on sheets.
• During banner printing, settings for conserving paper, number of copies, borderless printing,
enlargement or reduction, and other layout-related settings are disregarded.
1.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the printer in the B Format for list.
7.
8.
In the A Media Type list, click the type of paper that is loaded.
Click the original size in the C Paper Size list.
Click F OK to close the dialog box.
In the source application menu, choose Print.
Access the Main pane.
Make your selection in the E Print Target list.
394 Enhanced Printing Options
Tiling and multiple pages per sheet
9.
10.
11.
Access the Page Setup pane.
Click Roll Paper (Banner) in the A Media Source list.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
Enhanced Printing Options 395
Tiling and multiple pages per sheet
Printing Multiple Pages Continuously (Mac OS 9)
This topic describes how to print multiple pages as a single continuous image, without margins between pages.
Important
• This feature is only available with rolls. It cannot be used when printing on sheets.
• During banner printing, settings for conserving paper, number of copies, borderless printing,
enlargement or reduction, and other layout-related settings are disregarded.
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
Click the original size in the A Page Size list.
7.
8.
In the C Media Type list, click the type of paper that is loaded.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
In the source application menu, choose Print.
Make sure the Main pane is displayed.
Make your selection in the F Print Target list.
396 Enhanced Printing Options
Tiling and multiple pages per sheet
9.
10.
11.
Access the Finishing pane.
Click Roll Paper (Banner) in the A Media Source list.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
Enhanced Printing Options 397
Tiling and multiple pages per sheet
Printing Multiple Pages Per Sheet (Windows)
This topic describes how to print four pages of originals together on a single sheet based on the following example.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Sheets ( Cassette )
Paper Type: Plain Paper
Paper size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
1.
2.
3.
Choose Print in the application menu.
4.
5.
6.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Select the type of document in the E Print Target list.
Click the Page Setup tab to display the Page Setup sheet.
398 Enhanced Printing Options
Tiling and multiple pages per sheet
7.
In A Page Size, click the size of the original as specied in the application. In this case, click
ISO A4 or Letter (8.5"x11").
8.
9.
10.
11.
Click Cassette in the L Media Source list.
Click the Layout tab to display the Layout sheet.
Select the A Page Layout check box.
Click 4 Pages/Sheet in the B Page Layout list.
Note
• You can select the layout order for placing four pages on a sheet and a frame border in the Page
Layout Printing dialog box by clicking C Set.
12.
Conrm the print settings and print as desired.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
Enhanced Printing Options 399
Tiling and multiple pages per sheet
Printing Multiple Pages Per Sheet (Mac OS X)
This topic describes how to print four pages of an original on a single sheet, based on the following example.
•
•
•
•
•
Document: Any Type
Page size: A4 (210.0×297.0 mm)
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper size: A4 (210.0×297.0 mm)
1.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the printer in the B Format for list.
7.
Click 4 in the A Pages per Sheet list.
In the C Paper Size list, click the size of the original. In this case, click ISO A4.
Click F OK to close the dialog box.
Choose Print in the application menu.
Access the Layout pane.
Note
• You can choose the layout order and specify a boundary line for the four pages in B Layout
Direction and C Border (or Border ).
400 Enhanced Printing Options
Tiling and multiple pages per sheet
8.
Access the Main pane.
9.
10.
11.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
12.
13.
Click Cassette in the A Media Source list.
Select the printing application in the E Print Target list.
Access the Page Setup pane.
Make sure C Page Size shows the original size as specied in C Paper Size in the Page
Attribute dialog box-in this case, ISO A4.
Enhanced Printing Options 401
Tiling and multiple pages per sheet
14.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
402 Enhanced Printing Options
Tiling and multiple pages per sheet
Printing Multiple Pages Per Sheet (Mac OS 9)
This topic describes how to print four pages of an original on a single sheet based on the following example.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
In the A Page Size list, click the size of the original. In this case, click ISO A4.
7.
8.
In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
Select the printing application in the F Print Target list.
Enhanced Printing Options 403
Tiling and multiple pages per sheet
9.
10.
11.
Access the Page Setup pane.
Select the I Page Layout check box.
Click 4 Pages/Sheet in the I Page Layout list.
Note
• You can choose the layout order and specify a boundary line for the four pages in J Layout
Direction and K Page Border.
12.
Access the Finishing pane.
13.
14.
Click Cassette in the A Media Source list.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
404 Enhanced Printing Options
Centering originals
Centering originals
Printing Originals Centered on Rolls
You can print originals centered on a page-for example, if the paper is larger than the original, or if you
are reducing the original.
Centering originals relative to roll paper width
If you use originals smaller than the roll paper width, you can center them relative to the width when printing.
Print Centered
Aligns the center of the original with the center of the roll, relative to the width.
For instructions on centering originals when printing on rolls, refer to the following topics, as appropriate for
your computer and operating system.
• Printing Originals Centered on Rolls (Windows) (→P.407)
• Printing Originals Centered on Rolls (Mac OS X) (→P.409)
• Printing Originals Centered on Rolls (Mac OS 9) (→P.412)
Enhanced Printing Options 405
Centering originals
Printing Originals Centered on Sheets
You can print originals centered on a page-for example, if the paper is larger than the original, or if you
are reducing the original.
Centering originals on sheets
If you use paper larger than the original size or print originals after reduction, the printed images may be
aligned in the upper-left corner of the paper. In this case, you can center originals on sheets when printing.
Print Centered
Aligns the center of the original with the center of the sheet.
For instructions on centering originals when printing on sheets, refer to the following topics, as appropriate for
your computer and operating system.
• Printing Originals Centered on Sheets (Windows) (→P.415)
• Printing Originals Centered on Sheets (Mac OS X) (→P.417)
• Printing Originals Centered on Sheets (Mac OS 9) (→P.419)
406 Enhanced Printing Options
Centering originals
Printing Originals Centered on Rolls (Windows)
This topic describes how to center originals before printing on rolls based on the following example.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll width: A3/A4 roll (297.0 mm [11.7 in])
1.
2.
3.
Choose Print in the application menu.
4.
5.
6.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Select the print target in the E Print Target list.
Click the Page Setup tab to display the Page Setup sheet.
Enhanced Printing Options 407
Centering originals
7.
In the A Page Size list, click the size of the original as specied in the application. In this case,
click ISO A4 or Letter (8.5"x11").
8.
9.
Click Roll Paper in the L Media Source list.
Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A3/A4 Roll
(297.0mm).
10.
Click the Layout tab to display the Layout sheet.
11.
12.
Select the G Print Centered check box.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
408 Enhanced Printing Options
Centering originals
Printing Originals Centered on Rolls (Mac OS X)
This topic describes how to center originals before printing on rolls based on the following example.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paper width: A3/A4 roll (297.00 mm [11.7 in])
1.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the print target in the B Format for list.
7.
8.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
In C Paper Size, click the size of the original. In this case, click ISO A4.
Click F OK to close the dialog box.
Choose Print in the application menu.
Access the Main pane.
Select the print target in the E Print Target list.
Enhanced Printing Options 409
Centering originals
9.
10.
11.
Access the Page Setup pane.
Click Roll Paper in the A Media Source list.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case,
10-in. Roll.
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on
the Main pane and update the printer information.
410 Enhanced Printing Options
Centering originals
12.
Make sure the C Page Size setting matches the original size as selected in C Paper Size in the
Page Attribute dialog box-in this case, ISO A4.
13.
14.
Select the J Print Centered check box.
Conrm the print settings, and click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
Enhanced Printing Options 411
Centering originals
Printing Originals Centered on Rolls (Mac OS 9)
This topic describes how to center originals before printing on rolls based on the following example.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paper width: A3/A4 roll (297.0 mm [11.7 in])
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
In A Page Size, click the size of the original. In this case, click ISO A4.
7.
8.
In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
Select the print target in the F Print Target list.
412 Enhanced Printing Options
Centering originals
9.
10.
Access the Page Setup pane.
Make sure the B Page Size setting matches the original size as selected in A Page Size in the
Page Attribute dialog box-in this case, ISO A4.
11.
Access the Finishing pane.
Enhanced Printing Options 413
Centering originals
12.
13.
Click Roll Paper in the A Media Source list.
Make sure the width of the loaded roll is displayed in B Roll Paper Width -in this case, ISO
A3/A4 (297.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main
pane and update the printer information.
14.
15.
Select the F Print Centered check box.
Conrm the print settings, and click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
414 Enhanced Printing Options
Centering originals
Printing Originals Centered on Sheets (Windows)
This topic describes how to reduce an original 50% for printing centered on a sheet.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Sheets ( Manual )
Paper Type: Plain Paper
Paper size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
1.
2.
3.
Choose Print in the application menu.
4.
5.
6.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Select the type of document in the E Print Target list.
Click the Page Setup tab to display the Page Setup sheet.
Enhanced Printing Options 415
Centering originals
7.
In A Page Size, click the size of the original as specied in the application software. In this case,
click ISO A4 or Letter (8.5"x11").
8.
9.
10.
11.
12.
Select the C Enlarged/Reduced Printing check box.
13.
14.
Select the G Print Centered check box.
Click Match Page Size in the G Media Size list.
Click F Scaling and enter “50.”
Click Manual in the L Media Source list.
Click the Layout tab to display the Layout sheet.
Conrm the print settings and print as desired.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
Important
• If you have selected Cut Sheet as the media source, follow the instructions on the printer control
panel to enter the paper size.
• If you have selected Manual as the media source but have not loaded the paper yet, follow the
instructions on the printer control panel to complete the size setting before loading the paper.
416 Enhanced Printing Options
Centering originals
Printing Originals Centered on Sheets (Mac OS X)
This topic describes how to center originals for printing on sheets, based on the following example.
•
•
•
•
•
Document: Any type
Page size: A4/Letter
Paper: Sheets
Paper type: Plain Paper
Paper size: Non-standard
1.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
In the C Paper Size list, click the size of the original. In this case, click ISO A4.
6.
7.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Click F OK to close the dialog box.
In the application software menu, choose Print.
Access the Main pane.
Select the printing application in the E Print Target list.
Enhanced Printing Options 417
Centering originals
8.
9.
10.
Access the Page Setup pane.
Click Manual in the A Media Source list.
Make sure C Page Size shows the original size as specied in C Paper Size in the Page
Attribute dialog box-in this case, ISO A4.
11.
12.
Select the J Print Centered check box.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
Important
• If you have selected Cut Sheet as the media source, follow the instructions on the printer control
panel to enter the paper size.
• If you have selected Manual as the media source but have not loaded the paper yet, follow the
instructions on the printer control panel to complete the size setting before loading the paper.
418 Enhanced Printing Options
Centering originals
Printing Originals Centered on Sheets (Mac OS 9)
This topic describes how to center originals for printing on sheets, based on the following example.
•
•
•
•
•
Document: Any type
Page size: A4/Letter
Paper: Sheets ( Manual )
Paper type: Plain Paper
Paper size: Non-standard
1.
Choose Page Setup from the source application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
In the A Page Size list, click the size of the original. In this case, click ISO A4.
6.
7.
In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Click I OK to close the dialog box.
In the source application menu, choose Print.
Make sure the Main pane is displayed.
Select the printing application in the F Print Target list.
Enhanced Printing Options 419
Centering originals
8.
Access the Page Setup pane.
9.
Make sure B Page Size shows the original size as specied in Page Setup in the Page
Attribute dialog box-in this case, ISO A4.
10.
Access the Finishing pane.
420 Enhanced Printing Options
Centering originals
11.
12.
13.
Click Manual in the A Media Source list.
Select the F Print Centered check box.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
Important
• If you have selected Cut Sheet as the media source, follow the instructions on the printer control
panel to enter the paper size.
• If you have selected Manual as the media source but have not loaded the paper yet, follow the
instructions on the printer control panel to complete the size setting before loading the paper.
Enhanced Printing Options 421
Conserving roll paper
Conserving roll paper
Conserving Roll Paper by Rotating Originals 90 Degrees
You can conserve roll paper by specifying particular settings as suitable for your original.
Rotate Page 90 degrees (Conserve Paper)
When originals are printed in portrait orientation, the original is rotated 90 degrees before printing if it ts
within the roll width. This enables you to conserve paper.
Important
• If the page would exceed the roll paper width after rotation, use this function with Scale to t Roll
Paper Width to print rotated pages.
For tips on conserving roll paper, refer to the following topics, as appropriate for your computer and operating
system.
• Conserving Roll Paper by Rotating Originals 90 Degrees (Windows) (→P.431)
• Conserving Roll Paper by Rotating Originals 90 Degrees (Mac OS X) (→P.433)
• Conserving Roll Paper by Rotating Originals 90 Degrees (Mac OS 9) (→P.436)
422 Enhanced Printing Options
Conserving roll paper
Conserving Roll Paper by Printing Originals Without Top
and Bottom Margins
You can conserve roll paper by specifying particular settings as suitable for your original.
No Spaces at Top or Bottom (Conserve Paper)
You can print without feeding the paper for blank portions of originals if there are top and bottom margins in
originals. This enables you to conserve as much paper as the size of the margins.
Important
• Printing without the top and bottom margins is not supported in the following cases.
• Banner printing
• If you have chosen poster as the type of page layout
Note
• Even during borderless printing, you can print without the top and bottom margins.
• Printing without the top and bottom margins may cause inconsistency in the size of printed documents,
depending on the layout of images or text in your originals.
For tips on conserving roll paper, refer to the following topics, as appropriate for your computer and operating
system.
• Conserving Roll Paper by Printing Originals Without Top and Bottom Margins (Windows) (→P.424)
• Conserving Roll Paper by Printing Originals Without Top and Bottom Margins (Mac OS X) (→P.426)
• Conserving Roll Paper by Printing Originals Without Top and Bottom Margins (Mac OS 9) (→P.429)
Enhanced Printing Options 423
Conserving roll paper
Conserving Roll Paper by Printing Originals Without Top
and Bottom Margins (Windows)
This topic describes how to conserve roll paper when printing originals that have a top and bottom margin,
based on the following example.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paper width: A3/A4 roll (297.0 mm [11.7 in])
1.
2.
3.
Choose Print in the application menu.
4.
5.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Click the Page Setup tab to display the Page Setup sheet.
424 Enhanced Printing Options
Conserving roll paper
6.
In the A Page Size list, click the size of the original as specied in the application. In this case,
click ISO A4 or Letter (8.5"x11").
7.
8.
Click Roll Paper in the L Media Source list.
Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A3/A4 Roll
(297.0mm).
9.
10.
11.
Click the Layout tab to display the Layout sheet.
Select the I No Spaces at Top or Bottom (Conserve Paper) check box.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
Enhanced Printing Options 425
Conserving roll paper
Conserving Roll Paper by Printing Originals Without Top
and Bottom Margins (Mac OS X)
This topic describes how to conserve roll paper when printing originals that have a top and bottom margin,
based on the following example.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paper width: A3/A4 roll (297.0 mm [11.7 in])
1.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the print target in the B Format for list.
In C Paper Size, click the size of the original. In this case, click ISO A4.
Click F OK to close the dialog box.
Choose Print in the application menu.
Access the Main pane.
426 Enhanced Printing Options
Conserving roll paper
7.
8.
9.
10.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Access the Page Setup pane.
Click Roll Paper in the A Media Source list.
Make sure the width of the loaded roll is displayed in B Roll Paper Width -in this case, ISO
A3/A4 (297.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on
the Main pane and update the printer information.
Enhanced Printing Options 427
Conserving roll paper
11.
Make sure the C Page Size setting matches the original size as selected in C Paper Size in the
Page Attribute dialog box-in this case, ISO A4.
12.
13.
Select the K No Spaces at Top or Bottom check box.
Conrm the print settings, and click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
428 Enhanced Printing Options
Conserving roll paper
Conserving Roll Paper by Printing Originals Without Top
and Bottom Margins (Mac OS 9)
This topic describes how to conserve roll paper when printing originals that have a top and bottom margin,
based on the following example.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paper width: A3/A4 roll (297.0 mm [11.7 in])
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
In A Page Size, click the size of the original. In this case, click ISO A4.
7.
In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
Enhanced Printing Options 429
Conserving roll paper
8.
9.
10.
Access the Finishing pane.
Click Roll Paper in the A Media Source list.
Make sure the width of the loaded roll is displayed in B Roll Paper Width -in this case, ISO
A3/A4 (297.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main
pane and update the printer information.
11.
12.
Select the H No Spaces at Top or Bottom check box.
Conrm the print settings, and click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
430 Enhanced Printing Options
Conserving roll paper
Conserving Roll Paper by Rotating Originals 90 Degrees
(Windows)
This topic describes how to conserve paper by rotating originals 90 degrees before printing, based on the
following example.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3×11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paper width: A3/A4 roll (297.0 mm [11.7 in])
This example illustrates how to rotate an A4 (210.0×297.0 mm)/Letter (8.3×11.7 in) original in portrait
orientation 90 degrees to t within the width of A3/A4 roll paper (297.0 mm [11.7 in]), which enables you to
conserve paper.
1.
2.
3.
Choose Print in the application menu.
4.
5.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the printer in the dialog box, and then open the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Click the Page Setup tab to display the Page Setup sheet.
Enhanced Printing Options 431
Conserving roll paper
6.
In the A Page Size list, click the size of the original as specied in the application. In this case,
click ISO A4 or Letter (8.5"x11").
7.
8.
Click Roll Paper in the L Media Source list.
Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A3/A4 Roll
(297.0mm).
9.
10.
Select the K Rotate Page 90 degrees (Conserve Paper) check box.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
432 Enhanced Printing Options
Conserving roll paper
Conserving Roll Paper by Rotating Originals 90 Degrees
(Mac OS X)
This topic describes how to conserve roll paper by rotating originals 90 degrees before printing, based on the
following example.
•
•
•
•
•
Document: Any type
Page Size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paper width: A3/A4 roll (297.0 mm [11.7 in])
This example illustrates how to rotate an A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) original in portrait
orientation 90 degrees to t within the width of A3/A4 roll (297.0 mm [11.7 in]), which enables you to conserve
paper.
1.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the printer in the B Format for list.
In the C Paper Size list, click the size of the original. In this case, click ISO A4.
Click F OK to close the dialog box.
Choose Print in the application menu.
Access the Main pane.
Enhanced Printing Options 433
Conserving roll paper
7.
8.
9.
10.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Access the Page Setup pane.
Click Roll Paper in the A Media Source list.
Make sure the width of the loaded roll is displayed in B Roll Paper Width -in this case, ISO
A3/A4 (297.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on
the Main pane and update the printer information.
434 Enhanced Printing Options
Conserving roll paper
11.
Make sure the C Page Size setting matches the original size as selected in C Paper Size in the
Page Attribute dialog box-in this case, ISO A4.
12.
13.
Select the L Rotate Page 90 degrees check box.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
Enhanced Printing Options 435
Conserving roll paper
Conserving Roll Paper by Rotating Originals 90 Degrees
(Mac OS 9)
This topic describes how to conserve roll paper by rotating originals 90 degrees before printing, based on the
following example.
•
•
•
•
•
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll width: A3/A4 roll (297.0 mm [11.7 in])
This example illustrates how to rotate an A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) original in portrait
orientation 90 degrees to t within the width of A3/A4 roll (297.0 mm [11.7 in]), which enables you to conserve
paper.
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
In the A Page Size list, click the size of the original. In this case, click ISO A4.
7.
In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
436 Enhanced Printing Options
Conserving roll paper
8.
9.
10.
Access the Finishing pane.
Click Roll Paper in the A Media Source list.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case,
ISO A3/A4 (297.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main
pane and update the printer information.
11.
12.
Select the I Rotate Page 90 degrees check box.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
Enhanced Printing Options 437
Printing CAD Drawings
Printing CAD Drawings
Printing CAD Drawings
Using this printer, you can print ne lines and text clearly and sharply. It’s easy to produce highly precise
drawings from CAD applications.
For instructions on CAD printing, refer to the following topics, as appropriate for your computer and operating
system.
• Printing Line Drawings and Text (Windows) (→P.439)
• Printing Line Drawings and Text (Mac OS X) (→P.441)
• Printing Line Drawings and Text (Mac OS 9) (→P.443)
438 Enhanced Printing Options
Printing CAD Drawings
Printing Line Drawings and Text (Windows)
This topic describes how to print line drawings based on the following example.
•
•
•
•
•
Document: CAD drawing
Page size: A3 (297.0×420.0 mm [11.7 × 16.5 in])
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper size: A3 (297.0×420.0 mm [11.7 × 16.5 in])
1.
2.
3.
Choose Print in the application menu.
4.
5.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
After conrming that D Easy Settings is selected, click CAD (Line Drawing) in the E Print
Target list.
Note
• You can check the settings values selected in the E Print Target list by clicking F View Settings.
Enhanced Printing Options 439
Printing CAD Drawings
6.
Click the Page Setup tab to display the Page Setup sheet.
7.
In A Page Size, click the size of the original as specied in the application. In this case, click
ISO A3.
8.
9.
Click Cassette in the L Media Source list.
Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Windows)”. (→P.465)
10.
Conrm the print settings and print as desired.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
440 Enhanced Printing Options
Printing CAD Drawings
Printing Line Drawings and Text (Mac OS X)
This topic describes how to print line drawings based on the following example.
•
•
•
•
•
Document: CAD drawing
Page Size: A3 (297.0×420.0 mm [11.7 × 16.5 in])
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper Size: A3 (297.0×420.0 mm [11.7 × 16.5 in])
1.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the printer in the B Format for list.
7.
8.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
In the C Paper Size list, click the size of the original. In this case, click ISO A3.
Click F OK to close the dialog box.
Choose Print in the application menu.
Access the Main pane.
After conrming that D Easy Settings is selected, click CAD (Line Drawing) in the E Print
Target list.
Note
• You can check the settings values selected in the E Print Target list by clicking F View set.
Enhanced Printing Options 441
Printing CAD Drawings
9.
10.
11.
Access the Page Setup pane.
Click Cassette in the A Media Source list.
Make sure C Page Size on the Page Setup pane shows the original size as specied in C
Paper Size in the Page Attribute dialog box-in this case, ISO A3.
12.
Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Mac OS X)”. (→P.516)
13.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
442 Enhanced Printing Options
Printing CAD Drawings
Printing Line Drawings and Text (Mac OS 9)
This topic describes how to print line drawings based on the following example.
•
•
•
•
•
Document: CAD drawing
Page Size: A3 (297.0×420.0 mm [11.7 × 16.5 in])
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper size: A3 (297.0×420.0 mm [11.7 × 16.5 in])
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
In the A Page Size list, click the size of the original. In this case, click ISO A4.
7.
8.
In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
After conrming that E Easy Settings is selected, click CAD (Line Drawing) or CAD
(Monochrome Line Drawing ) in the F Print Target list.
Note
• You can check the settings values selected in the F Print Target list by clicking G View set.
Enhanced Printing Options 443
Printing CAD Drawings
9.
10.
11.
Access the Finishing pane.
Click Cassette in the A Media Source list.
Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Mac OS 9)”. (→P.541)
12.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
444 Enhanced Printing Options
Other useful settings
Other useful settings
Printing With Watermarks
You can add watermarks (background images) to documents that require special handling.
Watermark
Watermarks are applied to all pages of your document.
Important
• Watermarks are not printed if you select poster as the type of page layout.
The following watermarks are provided:
•
•
•
•
•
•
•
•
CONFIDENTIAL (Windows)
COPY (Windows and Mac OS 9)
DRAFT (Windows and Mac OS 9)
FILE COPY (Windows and Mac OS 9)
FINAL (Windows)
PRELIMINARY (Windows and Mac OS 9)
PROOF (Windows)
TOP SECRET (Windows and Mac OS 9)
You can also create your own watermarks. Specify the following options to customize your watermark.
• Watermark string: Specify the font, size, color, and so on. Surround the watermark with a frame,
if desired.
• Watermark position: Specify the position on the page, the angle, and so on.
• Watermark printing method: Specify whether to print the watermark superimposed or under the
document image. You can also print the watermark only on the rst page, if desired.
Note
• Watermarks are supported in Windows and Mac OS 9.
• In addition to the provided watermarks, you can create up to 50 original watermarks in Windows. In Mac
OS 9, you can use up to 50 original watermarks including the watermarks provided.
For detailed instructions on printing with watermarks, refer to the following topics:
• Printing with Watermarks-COPY, FILE COPY, and so on (Windows) (→P.461)
• Printing with Watermarks-COPY, FILE COPY, and so on (Mac OS 9) (→P.463)
Enhanced Printing Options 445
Other useful settings
Making the Original Orientation Match the Paper
Orientation
You can specify the original orientation to match the orientation of the paper for printing.
Orientation
Paper is usually loaded in the printer in portrait orientation. When you have an original in landscape
orientation, you can specify the printing orientation so that the original is printed in landscape orientation.
Rotate 180 degrees
The original is rotated 180 degrees to print it upside down.
Mirror
A mirror image of the original is printed.
For instructions on specifying the original orientation before printing, refer to the following topics, as
appropriate for your computer and operating system.
• Making the Original Orientation Match the Paper Orientation (Windows) (→P.455)
• Making the Original Orientation Match the Paper Orientation (Mac OS X) (→P.457)
• Making the Original Orientation Match the Paper Orientation (Mac OS 9) (→P.459)
446 Enhanced Printing Options
Other useful settings
Using Favorites
You can register print settings as “favorites” to reuse settings from a particular job that met your expectations,
or settings for a particular page size that you will use repeatedly.
Favorites
Registering a favorite for later use. You can choose the settings you have registered from a list before printing,
and you can check the settings details.
Note
• You can also save the favorite settings as les. Using these les is a convenient way to print under the
same conditions on another computer. (In Windows and Mac OS 9.)
For instructions on using favorites to print, refer to the following topics, as appropriate for your computer
and operating system.
• Using Favorites (Windows) (→P.472)
• Using Favorites (Mac OS X) (→P.530)
• Using Favorites (Mac OS 9) (→P.553)
Cutting Roll Paper After Printing
Roll paper can be automatically cut after printing.
Note
• It may not be possible to cut certain types of paper, such as adhesive paper. For details on types of
paper that cannot be used with the auto cut feature, see the Paper Reference Guide. (→P.107)
Automatic Cutting
Roll paper is cut automatically after printing. If you prefer, you can print continuously without cutting the
roll, or you can print a cut line.
For instructions on cutting roll paper after printing, refer to the following topics, as appropriate for your
computer and operating system.
• Cutting Roll Paper After Printing (Windows) (→P.450)
• Cutting Roll Paper After Printing (Mac OS X) (→P.451)
• Cutting Roll Paper After Printing (Mac OS 9) (→P.453)
Enhanced Printing Options 447
Other useful settings
Printing from Photoshop
You can print images in the Adobe RGB color space that you have created in Photoshop, the Adobe Systems
photo retouching application. Using the dedicated Photoshop printer driver plug-in (provided with the printer)
makes it easy to print Adobe RGB images more attractively.
• Using the Plug-in to Print (→P.448)
• Using the Printer Driver to Print (→P.448)
Using the Plug-in to Print
The imagePROGRAF Print Plug-In for Photoshop is a dedicated plug-in provided with the printer that you can
load in Photoshop and customize for your printing needs. By using the plug-in, you can print while preserving
the 16-bit RGB data from Photoshop without losing the exceptional color gradations of original image. Some
of the settings and customizations available in the plug-in are as follows.
• Automatic detection of the color space (sRGB or Adobe RGB) for automatic selection of the optimal
prole. This feature eliminates the need to complete intricate settings when printing Adobe RGB images.
• Advanced gray adjustment, including adjustment of tone curves, in addition to an array of standard
adjustments for color balance, brightness, contrast, highlight, and shadow.
• Fine-tune color tones in Photoshop while viewing a preview that accurately reproduces printing results.
• With print log management, you can save and load setting parameters from past print jobs.
Note
• imagePROGRAF Print Plug-In for Photoshop for Windows and Macintosh are provided with the printer.
For instructions and details on which versions of Photoshop are compatible with the imagePROGRAF Print
Plug-In for Photoshop, refer to the following topics, as appropriate for your computer and operating system.
• imagePROGRAF Print Plug-In for Photoshop Guide (Windows)
• imagePROGRAF Print Plug-In for Photoshop Guide (Macintosh)
Using the Printer Driver to Print
The printer driver offers the following settings and adjustments.
• Choose the standard sRBG color space or Adobe RGB as desired.
• Adjust the color balance, brightness, contrast, saturation, and gray levels.
For instructions on using the printer driver to print Adobe RGB images created in Photoshop, refer to the
following topics, as appropriate for your computer and operating system.
• Printing Adobe RGB Images (Windows) (→P.489)
• Printing Adobe RGB Images (Mac OS X) (→P.531)
• Printing Adobe RGB Images (Mac OS 9) (→P.555)
448 Enhanced Printing Options
Other useful settings
Using PosterArtist to Compose Originals
You can print a variety of source documents from word-processing or spreadsheet programs or screen shots
from web browsers after composing an original with them using PosterArtist.
Important
• PosterArtist (sold separately) must be installed to use this function.
Edit Using PosterArtist
PosterArtist offers a wide range of features, including features to insert source documents in posters and
compose an original with them.
Important
• This function is only supported in Windows.
For detailed instructions on editing with PosterArtist, refer to the following topic:
• Using PosterArtist to Compose Originals (Windows) (→P.487)
Enhanced Printing Options 449
Other useful settings
Cutting Roll Paper After Printing (Windows)
This topic describes how to cut roll paper automatically (using the auto cut function) after printing, as well as
how to print a cut line to cut the paper manually.
Note
• Auto cut function is activated on the printer by factory default and when the printer driver is installed.
Follow the steps below to reactivate the function after it is disabled, or to change the setting for printing a
cut line instead.
1.
2.
3.
Choose Print in the application menu.
4.
5.
Click Roll Paper in the L Media Source list.
6.
To enable automatic cutting, click Yes in the A Automatic Cutting list. If you prefer to cut the
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Click the Page Setup tab to display the Page Setup sheet.
Click N Auto Cut to display the Automatic Cutting Settingsdialog box.
paper later yourself, click Print Cut Guideline.
7.
8.
Click OK to close the Automatic Cutting Settings dialog box.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
Roll paper will be automatically cut after printing.
450 Enhanced Printing Options
Other useful settings
Cutting Roll Paper After Printing (Mac OS X)
This topic describes how to cut roll paper automatically (using the auto cut function) after printing, as well as how
to print a cut line to cut the paper manually.
Note
• The auto cut function is activated on the printer by factory default and when the printer driver is installed.
Follow the steps below to reactivate the function once disabled, or select the setting for printing a
cut guideline instead.
1.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
Select the printer in the B Format for list.
7.
Click Roll Paper in the A Media Source list.
Choose the original size in the C Paper Size list.
Click F OK to close the dialog box.
Choose Print in the application menu.
Access the Page Setup pane.
Enhanced Printing Options 451
Other useful settings
8.
Access the Main pane.
9.
10.
In the A Media Type list, select the type of paper that is loaded.
11.
To enable automatic cutting, click Printer Default in the H Automatic Cutting list. If you prefer
Click C Set to display the Media Detailed Settingsdialog box.
to cut the paper later yourself, click Print Cut Guideline.
Important
• If the automatic cut function has been deactivated on the printer, change the auto cut setting on the
printer Control Panel.
12.
13.
Click OK to close the Media Detailed Settings dialog box.
Conrm the print settings, and click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
452 Enhanced Printing Options
Other useful settings
Cutting Roll Paper After Printing (Mac OS 9)
This topic describes how to cut roll paper automatically (using the auto cut function) after printing, as well as how
to print a cut line to cut the paper manually.
Note
• The auto cut function is activated on the printer by factory default and when the printer driver is installed.
Follow the steps below to reactivate the function once disabled, or select the setting for printing a
cut guideline instead.
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
Choose the original size in the A Page Size list.
7.
Make sure Roll Paper is selected in A Media Source.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
Choose Print in the application menu.
Access the Finishing pane.
Enhanced Printing Options 453
Other useful settings
8.
Access the Main pane.
9.
10.
In the C Media Type list, select the type of paper that is loaded.
11.
To enable automatic cutting, click Printer Default in the H Automatic Cutting list. If you prefer
Click D Set to display the Media Detailed Settingsdialog box.
to cut the paper later yourself, click Print Cut Guideline.
Important
• If the automatic cut function has been deactivated on the printer, change the auto cut setting on the
printer Control Panel.
12.
13.
Click OK to close the Media Detailed Settings dialog box.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
454 Enhanced Printing Options
Other useful settings
Making the Original Orientation Match the Paper
Orientation (Windows)
This topic describes how to print an original in landscape orientation after matching the paper orientation, based
on the following example.
•
•
•
•
•
Document: An original in landscape orientation
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
1.
2.
3.
Choose Print in the application menu.
4.
5.
6.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the printer in the dialog box, and then open the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Select the type of document in the E Print Target list.
Click the Page Setup tab to display the Page Setup sheet.
Enhanced Printing Options 455
Other useful settings
7.
In the A Page Size list, click the size of the original as specied in the application. In this case,
click ISO A4 or Letter (8.5"x11").
8.
9.
10.
In H Orientation, click J Landscape.
Click Cassette in the L Media Source list.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
456 Enhanced Printing Options
Other useful settings
Making the Original Orientation Match the Paper
Orientation (Mac OS X)
This topic describes how to print an original in landscape orientation after matching the paper orientation, based
on the following example.
•
•
•
•
•
Document: An original in landscape orientation
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
1.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
2.
3.
4.
5.
6.
7.
Select the printer in the B Format for list.
8.
9.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
In the C Paper Size list, click the size of the original. In this case, click ISO A4.
In D Orientation, click the icon of the document in landscape orientation.
Click F OK to close the dialog box.
Choose Print in the application menu.
Access the Main pane.
Select the printing application in the E Print Target list.
Enhanced Printing Options 457
Other useful settings
10.
Access the Page Setup pane.
11.
12.
Click Cassette in the A Media Source list.
Make sure C Page Size shows the original size as specied in C Paper Size in the Page
Attribute dialog box-in this case, ISO A4.
13.
Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
458 Enhanced Printing Options
Other useful settings
Making the Original Orientation Match the Paper
Orientation (Mac OS 9)
This topic describes how to print an original in landscape orientation after matching the paper orientation, based
on the following example.
•
•
•
•
•
Document: An original in landscape orientation
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
7.
In the A Page Size list, click the size of the original. In this case, click ISO A4.
8.
9.
In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
In B Orientation, click the icon of the document in landscape orientation.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
Select the printing application in the F Print Target list.
Enhanced Printing Options 459
Other useful settings
10.
Access the Finishing pane.
11.
12.
Click Cassette in the A Media Source list.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
460 Enhanced Printing Options
Other useful settings
Printing with Watermarks-COPY, FILE COPY, and so on
(Windows)
This topic describes how to print ofce documents with a watermark (in this case, “FILE COPY”) based on
the following example.
•
•
•
•
•
Document: Ofce document created using word-processing software or spreadsheet programs
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Sheets ( Cassette )
Paper Type: Plain Paper
Paper size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
1.
2.
3.
Choose Print in the application menu.
4.
5.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
After conrming that D Easy Settings is selected, click Ofce Document in the E Print
Target list.
Note
• You can check the settings values selected in the E Print Target list by clicking F View Settings.
Enhanced Printing Options 461
Other useful settings
6.
Click the Page Setup tab to display the Page Setup sheet.
7.
In A Page Size, click the size of the original as specied in the application. In this case, click
ISO A4 or Letter (8.5"x11").
8.
9.
10.
11.
Click Cassette in the L Media Source list.
Click the Layout tab to display the Layout sheet.
Select the D Watermark check box.
Click FILE COPY in the E Watermarks list.
Note
• To create your own, original watermark, click F Edit Watermark. Refer to the printer driver help for
instructions on modifying watermarks to create your own.
12.
Conrm the print settings and print as desired.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
462 Enhanced Printing Options
Other useful settings
Printing with Watermarks-COPY, FILE COPY, and so on
(Mac OS 9)
This topic describes how to print with watermarks, based on the following example of printing with a “FILE COPY”
watermark.
•
•
•
•
•
Document: Ofce document created using word-processing or spreadsheet programs
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Sheets ( Cassette )
Paper type: Plain Paper
Paper size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
In the A Page Size list, click the size of the original. In this case, click ISO A4.
Choose Page Setup in the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
Choose Print in the application menu.
Make sure the Main pane is displayed.
Enhanced Printing Options 463
Other useful settings
7.
8.
In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
After conrming that E Easy Settings is selected, click Ofce Document in the F Print Target
list.
Note
• You can check the settings values selected in the F Print Target list by clicking G View set.
9.
10.
11.
12.
Access the Finishing pane.
Click A Media Source in the Cassette list.
Select the C Watermark check box.
Click FILE COPY in the D Watermarks list.
Note
• To create your own, original watermark, click E Edit Watermark. Refer to the printer driver help for
instructions on modifying watermarks to create your own.
13.
Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Mac OS 9)”. (→P.541)
14.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
464 Enhanced Printing Options
Windows
Software
Windows
Printer Driver Settings (Windows)
For instructions on accessing the Windows printer driver, refer to the following topics.
• Accessing the Printer Driver Dialog Box from Applications (Windows) (→P.497)
• Accessing the Printer Driver Dialog Box from the Operating System Menu (Windows) (→P.499)
For information on the Windows printer driver settings, refer to the following topics.
• Main Sheet (Windows) (→P.474)
You can specify the media type, color processing, print quality, print preview, and other settings. Choose
Easy Settings to specify basic print settings based on the printing application or Advanced Settings
to complete more detailed settings as desired.
•
•
•
•
•
Media Detailed Settings Dialog Box (Windows) (→P.510)
View Settings Dialog Box for the Printing Application (Windows) (→P.515)
Color Settings Sheet: Color (Windows) (→P.501)
Color Settings Sheet: Monochrome (Windows) (→P.507)
Gray Adjustment Sheet (Windows) (→P.482)
• Page Setup Sheet (Windows) (→P.478)
You can specify the page size of the original, borderless printing, enlargement or reduction, the
orientation, the media size and source, and automatic cutting.
• Media Size Options Dialog Box (Windows) (→P.511)
Software 465
Windows
• Layout Sheet (Windows) (→P.480)
You can specify the page layout, watermarks, the orientation, the number of copies, and print processing
options.
• Special Settings Dialog Box (Windows) (→P.514)
• Favorites Sheet (Windows) (→P.483)
Groups of print settings you select on each sheet can be saved in a favorite. Favorites you have added
can be edited or used at the time of printing as desired.
• Utility Sheet (Windows) (→P.484)
You can specify settings related to maintenance for the Printhead and feed amount, as well as settings
for Color imageRUNNER Enlargement Copy.
• Support Sheet (Windows) (→P.485)
You can view support information and the user’s manual.
• Device Settings Sheet (Windows) (→P.486)
You can display settings for optional equipment installed on the printer and see the printer driver version.
imagePROGRAF Free Layout is a feature for freely arranging originals from various source applications on a
single page as desired before printing. For details, see Free Layout Guide .
Color imageRUNNER Enlargement Copy is a feature for automatic enlargement and printing of scanned
originals from a Color imageRUNNER. For details, see Color imageRUNNER Enlargement Copy Guide .
466 Software
Windows
Conrming Print Settings (Windows)
There are two ways to conrm the print settings, as follows.
• Checking a preview of the settings (→P.467)
• Checking a print preview (→P.468)
Checking a preview of the settings
A preview of the settings is displayed on the left side of the Main, Page Setup, and Layout sheets. By
checking images and numerical values in the preview, you can conrm current settings for the page size,
orientation, media source, layout, and so on.
Display Area
Information Displayed
Top illustrations
Illustrations indicate the orientation, page layout, borderless printing
selection, color mode, and other settings information.
Middle, bordered area
The page size, paper size, and method and percentage of enlargement
or reduction are displayed.
Bottom illustrations
Illustrations indicate the media source, orientation, borderless printing
selection, and other settings information.
Note
• To conrm the Print Target specied in Easy Settings, click F View Settings on the Main sheet to
display the View Settings dialog box.
Software 467
Windows
Checking a print preview
You can check an image of the original just as it will be printed.
When you activate this feature, PageComposer is launched before printing. Conrming how documents will
be printed this way helps prevent printing errors.
For details on print previews, see “Previewing Images Before Printing (Windows)”. (→P.469)
468 Software
Windows
Previewing Images Before Printing (Windows)
This topic describes how to preview images of print jobs before actually printing them.
1.
2.
3.
Choose Print in the application menu.
4.
5.
Select the L Open Preview When Print Job Starts check box.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
When you attempt to print, the PageComposer window is displayed. (At this point, the document
will not be printed yet.)
6.
In the PageComposer editing window, select the document to print and open the Print Preview
window.
7.
8.
After conrming that the layout is just as you expected, close the Print Preview window.
In the PageComposer editing window, make sure the document to print is selected. Choose
Print from the File menu.
Software 469
Windows
Paper Information on Printer Dialog Box (Windows)
On the Paper Information on Printer dialog box, you can obtain information on the paper in the printer and
congure printer driver settings for the media source and media type.
Note
• To display the Paper Information on Printer dialog box, on the Main Sheet (Windows) (→P.474) ,
click Get Information by Media Type.
Setting Item
A Media Source
470 Software
Description
Shows the Media Source supported by the printer, as well as information
about the loaded paper. To update the Media Source and media type
settings in the printer driver, select the desired Media Source option and
click OK .
Windows
Settings Summaries Dialog Box (Windows)
The Settings Summaries dialog box enables you to conrm the settings for the Main, Page Setup, Layout,
and Favorites sheets.
Button
A Copy
Corresponding Utility
Click to copy the settings information to the
clipboard. You can paste the settings information
into a le created with a text editor or similar
application.
Software 471
Windows
Using Favorites (Windows)
This topic describes how to register favorites and print using favorite settings.
Registering a favorite
Follow the steps below to save the current print settings as a favorite.
1.
2.
3.
4.
Choose Print in the application menu.
5.
6.
Click H Add to display the Add dialog box.
7.
Click OK to close the Add dialog box.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Complete the print settings.
Click the Favorites tab to display the Favorites sheet.
Complete the following settings in the Add dialog box.
• Enter a desired name in Name, such as “Photos for Presentations” or “Monthly Report.”
• Choose a tting icon for these print settings in the Icon list.
• In Comment, enter a description of the favorite to be added, as desired.
The favorite you have added is now displayed in A Favorites.
Note
• To save a favorite as a le, click J Export and specify the le to save.
472 Software
Windows
Printing using the favorite
Follow the steps below to print using the favorite you have registered.
1.
2.
3.
Choose Print in the application menu.
4.
In the A Favorites, choose the favorite you registered.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Click the Favorites tab to display the Favorites sheet.
Note
• To import a favorite, click I Import and specify the favorite le.
5.
6.
Click D Apply Favorite to replace the favorite settings with the current print settings.
Conrm the print settings and print as desired.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
Software 473
Windows
Main Sheet (Windows)
The following settings are available on the Main sheet. For details on settings items, refer to the printer
driver help.
Note
• On the Main sheet, choose Easy Settings to specify basic print settings based on the print target, or
switch to Advanced Settings to complete more detailed settings as desired.
Conguration using Easy Settings
Setting Item
A Media Type
Description
Select the paper type.
For information on the types of paper the printer supports, refer to the Paper
Reference Guide . (→P.107)
B Get Information
Click to display the Get Information dialog box, which shows media types
and sizes by media source, as specied on the printer. When you select a
media source, your selection is applied to the printer driver settings for the
media source, media type, and roll width.
C Preferences
Click to display the Media Detailed Settings dialog box for ink drying time
and other detailed settings based on the paper type.
E Print Target
F View Settings
Choose presets that match the type of document to be printed.
Printing Photos and Images (Windows, Mac OS X) (→P.207)
Printing Line Drawings and Text (Windows, Mac OS X) (→P.211)
Printing Ofce Documents (→P.213)
Depending on the Media Type setting, some Print Target options may
not be available.
Click to display the View Settings dialog box, which enables you to conrm
the settings for the selected item from the E Print Target list or change the
order of items listed in E Print Target .
L Open Preview When Print Activate this option to preview the print image before printing.
Job Starts
474 Software
Conrming the Print Image Before Printing (→P.509)
Windows
Setting Item
Description
M Status Monitor
Click to start imagePROGRAF Status Monitor , which enables you to conrm
the status of the printer and print jobs.
You can also set up email notication if printer errors occur by completing
the Email Notice settings.
For details, refer to the Status Monitor help.
N About
Click to conrm version information for the printer driver.
S Defaults
Click to restore all settings on the sheet to the default values.
Software 475
Windows
Conguration using Advanced Settings
Setting Item
A Media Type
Description
Select the paper type.
For information on the types of paper the printer supports, refer to the Paper
Reference Guide . (→P.107)
B Get Information
Click to display the Get Information dialog box, which shows media types
and sizes by media source, as specied on the printer. When you select a
media source, your selection is applied to the printer driver settings for the
media source, media type, and roll width.
C Preferences
Click to display the Media Detailed Settings dialog box for ink drying time
and other detailed settings based on the paper type.
E Print Priority
Choose the graphic elements that you want to emphasize for printing.
Giving Priority to Particular Graphic Elements and Colors for Printing
(→P.203)
F Print Quality
Choose the level of print quality.
Giving Priority to Particular Graphic Elements and Colors for Printing
(→P.203)
G Color Mode
Choose the color mode.
Giving Priority to Particular Graphic Elements and Colors for Printing
(→P.203)
The available Color Mode options vary depending on the Media Type
setting.
H Color Settings
Click to display the Color Settings dialog box for more advanced color
settings.
Adjusting the Color in the Printer Driver (→P.214)
I Thicken Fine Lines
Activate this option to print ne lines more distinctly.
J Unidirectional Printing
Although unidirectional printing is slower, it can help prevent misaligned
lines and ensure better results.
K High-Precision Printing
Select this option for printing at the highest level of quality. However, this
will take more time than regular printing.
L Open Preview When Print Activate this option to preview the print image before printing.
Job Starts
476 Software
Conrming the Print Image Before Printing (→P.509)
Windows
Setting Item
Description
M Status Monitor
Click to start imagePROGRAF Status Monitor , which enables you to
conrm the status of the printer and print jobs.
You can also set up email notication if printer errors occur by completing
the Email Notice settings.
For details, refer to the Status Monitor help.
N About
Click to conrm version information for the printer driver.
S Defaults
Click to restore all settings on the sheet to the default values.
Software 477
Windows
Page Setup Sheet (Windows)
The following settings are available on the Page Setupsheet. For details on settings items, refer to the
printer driver help.
Setting Item
Description
A Page Size
Select the page size as specied in the source application.
For details on available page sizes, see “Paper Sizes”. (→P.112)
B Borderless Printing
Borderless printing is available if Roll Paper is selected in the L Media
Source list. Choose from the following options when this setting is
activated.
Borderless Printing on Paper of Equivalent Size (→P.325)
Borderless Printing by Resizing Originals to Fit the Roll Width (→P.327)
Borderless Printing at Actual Size (→P.307)
D Fit Media Size
Scales the document image to match the paper size.
E Scale to t Roll Paper
Scales the document image to match the roll width.
Width
F Print Image with Actual Prints documents at their actual size. This function is available, when you
Size
have selected the size same as the width of Roll Paper for either length
or width of the document from the A Page Size list.
G Media Size
Choose the size of the paper you will print on.
For details on available paper sizes, see “Paper Sizes”. (→P.112)
Paper sizes compatible with borderless printing are shown in the list.
Available when Fit Media
Size is selected.
C Enlarged/Reduced Printing
478 Software
Choose from the following options when this setting is activated.
Resizing Originals to Match the Paper Size (→P.273)
Resizing Originals to Fit the Roll Width (→P.274)
Resizing Originals by Entering a Scaling Value (→P.275)
D Fit Media Size
Scales the document image to match the paper size.
E Fit Roll Paper Width
Scales the document image to match the roll width.
F Scaling
Resizes the document image based on a specied scaling value. Enter a
value in a range of “5-600.”
G Media Size
Choose the size of the paper you will print on.
For details on available paper sizes, see “Paper Sizes”. (→P.112)
Windows
Setting Item
Description
H Orientation
Choose the printing orientation.
Making the Original Orientation Match the Paper Orientation (→P.446)
K Rotate Page 90 degrees
Activate this setting to rotate the document image by 90 degrees before
printing.
Conserving Roll Paper by Rotating Originals 90 Degrees (→P.422)
(Conserve Paper)
L Media Source
Choose how paper is supplied.
Options displayed in the list vary depending on the selection in Media
Type in the Main sheet.
M Roll Paper Width
Choose the roll width.
For details on available roll widths, see “Paper Sizes”. (→P.112)
N Auto Cut
You can activate or deactivate automatic cutting and printing of cut lines,
as desired. Click to display the Automatic Cutting Settings dialog box.
Under A Automatic Cutting , you can specify Yes or No and Print Cut
Guideline .
Cutting Roll Paper After Printing (→P.447)
O Size Options
Click to display the Media Size Options dialog box, which enables you to
register additional paper sizes or select the size system for use.
S Defaults
Restores all settings on the sheet to the default values.
Software 479
Windows
Layout Sheet (Windows)
The following settings are available on the Layoutsheet. For details on settings items, refer to the printer
driver help.
Setting Item
A Page Layout
C Set
D Watermark
Description
Activate this setting to select a particular page layout.
Printing Multiple Pages Per Sheet (→P.383)
Printing Posters in Sections (→P.384)
Printing Multiple Originals Next to Each Other (→P.380)
Using PosterArtist to Compose Originals (→P.449)
Click to display one of the following dialog boxes depending on the selection in
A Page Layout . In these dialog boxes, you can specify layout details and
which pages to print, as well as other settings.
• Page Layout Printing
• Pages to Print
• Free Layout Settings
Activating this option makes two settings available, E Watermarks and F
Edit Watermark .
Printing With Watermarks (→P.445)
E Watermarks
Lists the provided watermarks. Choose the watermark to print.
F Edit Watermark
Click to display the Edit Watermark dialog box for creating your own, original
watermark.
G Print Centered
Activate this setting to print document images in the center of the paper.
Printing Originals Centered on Rolls (→P.405)
Printing Originals Centered on Sheets (→P.406)
H Rotate 180 degrees
Activate this option to rotate document images by 180 degrees before printing.
I No Spaces at Top or
Activate this setting to print the next image skipping blank areas above and
below printable data in documents, which enables you to conserve the paper.
Conserving Roll Paper by Printing Originals Without Top and Bottom Margins
(→P.423)
Bottom (Conserve Paper)
J Copies
480 Software
Enter the number of copies to print, in a range of “1-999.”
Reverse Order
Activate this option to print pages in reverse order.
Collate
Activate this option to print complete sets in the specied quantity.
Windows
Setting Item
Description
M Special Settings
If the printing results are not as you expected, click this option to change how
printing is processed.
S Defaults
Click to restore all settings on the sheet to the default values.
Software 481
Windows
Gray Adjustment Sheet (Windows)
The following settings are available on the Gray Adjustment sheet.
Gray Adjustment
On the Gray Adjustment sheet, you can adjust the color balance, brightness, contrast, and other image
qualities.
Note
• To display the Gray Adjustment sheet, on the Main Sheet (Windows) (→P.474) , select Monochrome
(Photo) by Color Mode in Advanced Settings, and then click Color Settings.
• Monochrome (Photo) is not available for all types of paper.
Setting Item
Description
A Sample
The image at left is updated to reect any changes you make to setting
items on the sheet, enabling you to check the results of adjustment.
B Sample List
Select a sample image, as desired.
C Color Balance
Click the list to select a color balance that suits the printing application.
DX
Adjust the color balance as you check the color tone in the adjustment area.
You can adjust the square area in the center by clicking or dragging it.
Drag the vertical or horizontal scroll bars for adjustment, as desired.
You can click the arrows by the X (horizontal) and Y (vertical) boxes or enter
the values directly.
EY
F Brightness
Adjust the overall image brightness as desired. You can adjust the
brightness if the printed document is lighter or darker than the original image
(that is, the original photo that was scanned or the original graphic as it
appears on the computer screen).
G Contrast
Adjust the contrast of the darkest and lightest portions relative to each other,
as desired. Increasing the Contrast makes images sharper, and reducing
the Contrast softens images.
H Highlight
Adjust the brightness of the lightest portion.
I Shadow
Adjust the brightness of the darkest portion.
K Defaults
Click to restore all settings on the sheet to the default values.
482 Software
Windows
Favorites Sheet (Windows)
The following settings are available on the Favoritessheet. For details on settings items, refer to the printer
driver help.
Setting Item
Description
A Favorites
Printing favorites you have created are listed with Default Settings
favorites.
Using Favorites (→P.447)
B Settings Details
Displays details of the favorite selected in the A Favorites .
C Comment
Displays notes registered in the favorite.
D Apply Favorite
Click to change the current print settings to those of the favorite
selected in the A Favorites .
E Application Settings Priority
Activate this setting to use settings values specied in the source
application in preference to favorite settings selected in the A
Favorites , when clicking D Apply Favorite . For details on the
settings items used in preference, refer to the printer driver help.
F Delete
Click to delete the selected favorite settings from the A Favorites .
G Edit
Click to display the Edit dialog box, which enables you to change the
name and icon for the favorite settings selected in the Favorites .
H Add
Click to display the Add dialog box, which enables you to add the
current print settings as a favorite.
I Import
Click to display the Open dialog box, which enables you to import
favorite settings saved as a le.
J Export
Click to display the Save As dialog box, which enables you to save the
favorite settings as a le.
Software 483
Windows
Utility Sheet (Windows)
The following settings are available on the Utilitysheet. For details on the utilities, refer to the relevant
utility help.
Button
Corresponding Utility
A Maintenance
Click to start the imagePROGRAF Status Monitor
, which offers the following maintenance for the
printer.
• Nozzle (ink ejecting outlet) check
• Nozzle (ink ejecting outlet) cleaning
• Head alignment adjustment
• Feed amount adjustment
B Color imageRUNNER Enlargement Copy
Click to launch Color imageRUNNER Enlargement
Copy (*1) (iR enlargement copy), which enables
you to create hot folders used for Color
imageRUNNER Enlargement Copy and assign
print settings to hot folders.
Printing Enlargements of Scanned Originals from a
Color imageRUNNER (Windows) (→P.277)
*1: For details, see Color imageRUNNER Enlargement Copy Guide .
484 Software
Windows
Support Sheet (Windows)
On the Support sheet, you can view support information and the user’s manual.
Button
Corresponding Utility
A Support Information
Click to access the Canon support webpage,
where you can nd the latest information on the
printer and consumables, check for printer driver
updates, and browse other information.
B User Manual
Click to view the printer user’s manual. This
function requires the user’s manual to be installed
on your computer.
C Settings Summaries
Click to display the View Settings dialog box,
which enables you to conrm the settings for the
Main , Page Setup , Layout , and Favorites
sheets.
Software 485
Windows
Device Settings Sheet (Windows)
Many settings items on the printer properties sheets are controlled by Windows applications. However, the
Device Settings sheet is for conguring the printer, and it is an extension of the printer driver.
The following settings are available on the Device Settingssheet.
Setting Item
A About
486 Software
Description
You can display version information for the printer
driver.
Windows
Using PosterArtist to Compose Originals (Windows)
This topic describes how to use PosterArtist to compose originals from multiple applications, creating a poster
layout for printing.
Important
• PosterArtist (sold separately) must be installed to use this function.
1.
2.
3.
Choose Print in the application menu.
4.
Click the Layout tab to display the Layout sheet.
5.
6.
7.
Select the A Page Layout check box.
Select the printer in the dialog box, and then open the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Click in the Edit Using PosterArtist in the B Page Layout list.
When you attempt to print, PosterArtist starts up and the PageCapture window is displayed. (At
this point, the document will not be printed yet.)
Software 487
Windows
8.
9.
Choose the page to load in PosterArtist.
Edit and rearrange the image in the PosterArtist window as desired.
Important
• Without closing the PosterArtist window, repeat steps 1-8 to arrange originals from multiple
applications on the same page.
Note
• For instructions on editing and rearranging images, refer to the PosterArtist Manual.
10.
Print from the PosterArtist menu.
488 Software
Windows
Printing Adobe RGB Images (Windows)
This topic describes how to print Adobe RGB images based on the following example.
•
•
•
•
•
Document: Adobe RGB image created in Photoshop
Page Size: 10×12 inches (254.0×304.8 mm)
Paper: Roll
Paper type: Glossy Photo Paper
Roll Paper Width: 10 inches (254.0 mm)
Important
• In Photoshop, select no color-matching.
• In the printer driver settings, select Driver Matching Mode and choose Adobe RGB in Color Space.
1.
In Photoshop, create an image in the Adobe RGB color space.
Note
• The following procedures are based on the example of Photoshop CS2.
• For instructions on creating Adobe RGB images, refer to the Photoshop documentation.
2.
3.
4.
5.
6.
7.
Choose Print with Preview from the File menu to display the Print dialog box.
8.
In the A Media Type list, select the type of paper that is loaded. In this case, click Glossy
Make sure the setting mode is Color Management.
In the Color Handling list in Options, click No Color Management.
Click Print to display the Print dialog box.
Select the printer and click Properties to display the printer driver dialog box.
Make sure the Main sheet is displayed.
Photo Paper.
Software 489
Windows
9.
10.
11.
Click D Advanced Settings to switch the print mode.
Click Image in the E Print Priority list.
Select the print quality in the F Print Quality list.
Note
• Options displayed in the F Print Quality list vary depending on the paper type.
12.
13.
14.
15.
16.
17.
18.
Click Color in the G Color Mode list.
19.
In the A Page Size list, click the size of the original as specied in the source application.
Click H Color Settings to display the Color Settings dialog box.
Click the Matching tab to display the Matching sheet.
In Matching Mode, click Driver Matching Mode.
In Color Space, click Adobe RGB.
Click OK to close the Color Settings dialog box.
Click the Page Setup tab to display the Page Setup sheet.
In this case, click 10"x12".
490 Software
Windows
20.
21.
Click Roll Paper in the L Media Source list.
Select the width of the loaded roll in the Roll Paper Width list. In this case, click 10-in. Roll
(254.0mm), and then click OK.
22.
Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.467)
Software 491
Windows
imagePROGRAF Status Monitor (Windows)
imagePROGRAF Status Monitor is a utility for checking the printer status and managing print jobs.
Two screens are available in imagePROGRAF Status Monitor : “Printer List” shows a list of printers, and
“Status Monitor” shows details for each printer.
• You can view a list of the printers for which printer drivers have been installed on your computer, printers
connected to your computer, and printers found on the network.
• Printer status can be checked in real time on a computer monitor.
• If a printer error occurs, you can investigate the corrective action immediately.
• Images of Ink Tanks are shown, with different images for various types of ink. An icon and warning
message will notify you when ink levels are low.
• The type of paper loaded in each media source is identied. You can also check to see if paper has
run out.
• This way, the utility enables you to check printer information and take care of printer maintenance
for optimal printing results.
• You can also set up automatic email notication of any printer problems or errors to email addresses you
designate in advance.
Note
• For details, refer to the imagePROGRAF Status Monitor help.
492 Software
Windows
imagePROGRAF Device Setup Utility
imagePROGRAF Device Setup Utility is a utility to establish communication between the printer and
your computer by completing relevant settings. After the printer is installed, for example, you can use
imagePROGRAF Device Setup Utility to complete the network settings initially.
• Starting imagePROGRAF Device Setup Utility will show a list of printers found on the network. In this
list, select the printer (specically, the printer’s Mac address) that you want to set up, and then congure
the basic settings from your computer, such as the printer’s IP address and the network frame type.
• You can see which printers are online in the network by checking the printer list. Communication
between your computer and these printers is possible.
Note
• We recommend that your network or printer administrator complete the setup work using
imagePROGRAF Device Setup Utility.
• For details, refer to the imagePROGRAF Device Setup Utility help.
Software 493
Windows
Installing imagePROGRAF Device Setup Utility
Install imagePROGRAF Device Setup Utility from the User Software CD-ROM provided with the printer
as follows:
Important
• In Windows 2000/Windows XP/Windows Server 2003/Windows Vista, you must log on with
administrative rights equivalent to the “Administrator” account.
1.
2.
3.
4.
Insert the User Software CD-ROM in the CD-ROM drive.
On the Setup Menu window, click Install Individual Software.
Click Install in imagePROGRAF Device Setup Utility.
Follow the instructions on the screen to proceed with the installation.
494 Software
Windows
Conguring the IP Address Using imagePROGRAF
Device Setup Utility
From a computer running Windows, you can use imagePROGRAF Device Setup Utility provided with the
printer to congure the printer’s IP address. This topic describes how to congure the IP address using
imagePROGRAF Device Setup Utility.
Important
• To congure network settings, you must be logged in with administrative rights such as “Administrator”
account. We recommend that your network administrator congure the network settings.
• For instructions on installing imagePROGRAF Device Setup Utility, see “Installing imagePROGRAF
Device Setup Utility”. (→P.494)
1.
2.
3.
4.
5.
6.
7.
Start imagePROGRAF Device Setup Utility from the start menu.
In the list of printers, select the printer to congure.
Choose Protocol Settings from the Printer menu.
In the Setting IP Address list, choose Manual.
Enter the IP address assigned to the printer and click the Set button.
Click OK after the Conrmation message dialog box is displayed.
Exit imagePROGRAF Device Setup Utility.
Note
• To congure the IP address automatically, choose Auto in the Setting IP Address list and select
DHCP, BOOTP, or RARP.
• You can also specify the subnet mask and default gateway.
Software 495
Windows
Digital Photo Front-Access
Digital Photo Front-Access is an application that links photos from Canon digital cameras and other image
les on your computer with various other applications.
• Simply select an image and click the icon of the application you want to start to launch the application.
• You can also print from Digital Photo Front-Access. In short, Digital Photo Front-Access can help you
manage images in many ways from editing to printing as an effective way to work with other applications.
• Digital Photo Front-Access also enables image retouching. For automatic retouching, select an image
for retouching and click Image Adjustment.
• Because this application automates the workow from retouching to display for all of your images, it
can save time and work in retouching.
Note
• For details, refer to the Digital Photo Front-Access help.
496 Software
Windows
Accessing the Printer Driver Dialog Box from
Applications (Windows)
1.
2.
Choose Print from the File menu to display the dialog box for printing conditions.
Select the printer, and then display the printer driver dialog box.
Note
• The dialog box for specifying printing conditions varies depending on the source application. In some
cases, when you select the printer, a sheet for conguring the printer driver is added to the dialog box.
In the following case, click Preferences.
■Example: Print dialog box displayed by the application software
Six sheets of print settings are displayed by the printer driver: Main, Page Setup, Layout,
Favorites, Utility, and Support.
Note
• The titles of dialog boxes may vary depending on the application, and sheets other than these
six sheets may be displayed.
Software 497
Windows
Important
• If you access the printer driver dialog box from the source application, changes you make to the settings
will only apply temporarily to that application. Because these are sizes you specify temporarily in the
printer driver, the sizes will not be available after you exit the application.
• You can also access the printer driver dialog box from the Windows system menu.
see “Accessing the Printer Driver Dialog Box from the Operating System Menu (Windows)”. (→P.499)
498 Software
Windows
Accessing the Printer Driver Dialog Box from the
Operating System Menu (Windows)
1.
2.
Click start > Printers and Faxes (or Printers ).
3.
Click Printing Preferences to display the Printing Preferences dialog box, titled with the
Select the printer, and then display the printer properties dialog box.
name of this printer.
Note
• The Device Settings sheet is also an extension of the printer driver. (→P.486)
Software 499
Windows
Six sheets of print settings are displayed by the printer driver: Main, Page Setup, Layout,
Favorites, Utility, and Support.
Important
• If you access the printer driver dialog box from the operating system menu, changes you make to the
settings will apply to all applications you use for printing.
• You can also access the printer driver dialog box from applications.
see “Accessing the Printer Driver Dialog Box from Applications (Windows)”. (→P.497)
500 Software
Windows
Color Settings Sheet: Color (Windows)
In general, make any needed adjustments to the color of documents in the application used to create them.
However, if the color tone as printed is not as you expected, you can also adjust the color in the printer driver.
Color Adjustment : color
If the color tone as printed is not as you expected, you can adjust it on the Color Adjustment sheet.
Note
• To display the Color Adjustment sheet, on the Main Sheet (Windows) (→P.474) , click Color Settings
by Color Mode in Advanced Settings.
Setting Item
Description
A Preview
The image at left is updated to reect any changes you make to setting
items on the sheet, enabling you to check the results of adjustment.
B Original
The image at right shows the original state before adjustment. You can
compare it to the Preview image.
C Cyan
Correct color tones by adjusting the levels of each color.
D Magenta
E Yellow
F Brightness
Adjust the overall image brightness as desired. You can adjust the
brightness if the printed document is lighter or darker than the original
image (that is, the original photo that was scanned or the original graphic
as it appears on the computer screen).
G Contrast
Adjust the contrast of the darkest and lightest portions relative to each
other, as desired. Increasing the Contrast makes images sharper, and
reducing the Contrast softens images.
H Saturation
Adjust the color intensity as desired. Increasing the Saturation setting
makes colors more vivid, and reducing the Saturation makes colors more
subdued.
I Gray Tone Adjustment
Adjust the color tone of grays as desired. Choose Cool Black (tinged with
blue), Warm Black (tinged with red), and so on.
Software 501
Windows
Setting Item
Description
J Object Adjustment
Select this option to display the Object Adjustment dialog box, in which
you can specify objects subject to color adjustment.
S Defaults
Click to restore all settings on the sheet to the default values.
Note
• For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P.214)
Object Adjustment dialog box
In the Object Adjustment dialog box, you can specify what type of print jobs to apply color adjustment to. If
an original comprises images, graphics, and text, you can specify which portion to apply color adjustment to.
Note
• To display the Object Adjustment dialog box, click Object Adjustment on the Color Adjustment sheet.
Setting Item
Description
A Image
Select this option to apply color adjustment to image areas, such as photos.
B Graphics
Select this option to apply color adjustment to graphics, such as lines and
circles.
C Text
Select this option to apply color adjustment to text.
502 Software
Windows
Matching sheet: Driver Matching Mode
On the Matching sheet, you can specify color matching, to compensate for differences in the appearance of
colors on various devices. The following options are available when you select Driver Matching Mode in
the Matching Mode list.
Note
• To display the Matching sheet, on the Main Sheet (Windows) (→P.474) , click Color Settings by Color
Mode in Advanced Settings, and then click the Matching sheet.
Setting Item
Description
A Matching Mode
Select the color matching mode to use, as desired.
Normally, select Driver Matching Mode . For color matching based on
ICC proles, select ICC Matching Mode , Driver ICM Mode , or Host ICM
Mode , depending on your color matching system. If you don’t want color
matching using the printer driver, select Off .
B Matching Method
Select the color matching method that suits the document to be printed.
Various Matching Method options are available depending on your
selection in Matching .
C Color Space
Select the applicable color space as desired.
Note
• For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P.214)
Software 503
Windows
Matching sheet: ICC Matching Mode, Driver ICM Mode, and Host
ICM Mode
On the Matching sheet, you can specify color matching, to compensate for differences in the appearance of
colors on various devices. The following options are available when you select ICC Matching Mode, Driver
ICM Mode, or Host ICM Mode on the Matching Mode sheet.
Note
• To display the Matching sheet, on the Main Sheet (Windows) (→P.474) , click Color Settings by Color
Mode in Advanced Settings, and then click the Matching sheet.
Setting Item
Description
A Matching Mode
Select the color matching mode to use, as desired.
B Input Prole Settings
You can select Image , Graphics , or Text . You can choose Matching
Method and Input Prole .
Various options are available depending on your selected Matching Mode .
To apply the same input prole automatically for Graphics and Text , select
Use the Same Prole for All Objects . To apply separate input proles
to Graphics and Text , clear Use the Same Prole for All Objects and
specify the individual settings.
C Printer Prole Settings
Specify the printer prole as desired. Normally, select Auto Settings .
Note
• For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P.214)
504 Software
Windows
Matching sheet: Ambient Light Matching Mode (Kyuanos)
On the Matching sheet, you can specify color matching to compensate for differences in the appearance of
colors on various devices. The following options are available when you select Ambient Light Matching
Mode (Kyuanos) in the Matching Mode list.
When you select By selecting a chart number in Setting Method
When you select By entering values directly in Setting Method
Setting Item
Description
A Matching Mode
Select the color matching mode to use, as desired.
Here, select Ambient Light Matching Mode (Kyuanos) .
B Matching Method
Select the matching method.
C Setting Method
You can choose conguration based on printed Charts or based on using
the Eye-One spectrophotometer.
D Print Chart
Click to start the Light Source Check Tool , for printing Charts . The
Light Source Check Tool must be installed to use this function.
Software 505
Windows
Setting Item
Description
E Chart Number
In Chart , select the number of the pattern with your desired colors.
F Lighting Source Type
Select the light source measured using the Eye-One spectrophotometer.
G Color Temperature
Select the value measured using the Eye-One spectrophotometer.
Light Source Check Tool
The Light Source Check Tool enables you to print Chart.
Setting Item
Description
A Printer
The printer name is displayed here.
B Media Type
Select the type of paper, as desired. For information on the types of paper
compatible with Ambient Light Matching Mode (Kyuanos) , refer to the
Paper Reference Guide . (→P.107)
C Media Source
Choose the media source, as desired.
Options displayed in the list vary depending on the selection in Media Type
in the Main sheet.
D Print
Click to print the Chart .
506 Software
Windows
Color Settings Sheet: Monochrome (Windows)
The following settings are available on the Color Settings sheet for monochrome printing.
Color Adjustment : monochrome
On the Color Adjustment sheet for monochrome printing, you can adjust the brightness and contrast.
Note
• To display the Color Adjustment sheet, on the Main Sheet (Windows) (→P.474) , click Color Settings
by Color Mode in Advanced Settings.
Setting Item
Description
A Preview
The image at left is updated to reect any changes you make to setting
items on the sheet, enabling you to check the results of adjustment.
B Original
The image at right shows the original state before adjustment. You can
compare it to the Preview image.
C Cyan
Not available.
D Magenta
E Yellow
F Brightness
Adjust the overall image brightness as desired. You can adjust the
brightness if the printed document is lighter or darker than the original
image (that is, the original photo that was scanned or the original graphic
as it appears on the computer screen).
G Contrast
Adjust the contrast of the darkest and lightest portions relative to each
other, as desired. Increasing the Contrast makes images sharper, and
reducing the Contrast softens images.
H Saturation
Not available.
I Gray Tone Adjustment
Not available.
J Object Adjustment
Select this option to display the Object Adjustment dialog box, in which
you can specify objects subject to color adjustment.
S Defaults
Click to restore all settings on the sheet to the default values.
Software 507
Windows
Note
• For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P.214)
Object Adjustment dialog box
In the Object Adjustment dialog box, you can specify what type of print jobs to apply color adjustment to. If
an original comprises images, graphics, and text, you can specify which portion to apply color adjustment to.
Note
• To display the Object Adjustment dialog box, click Object Adjustment on the Color Adjustment sheet.
Setting Item
Description
A Image
Select this option to apply color adjustment to image areas, such as photos.
B Graphics
Select this option to apply color adjustment to graphics, such as lines and
circles.
C Text
Select this option to apply color adjustment to text.
508 Software
Windows
Conrming the Print Image Before Printing
The preview screen displayed before printing enables you to see the original image just as it will be printed.
Conrming the image of print jobs helps prevent printing errors.
For instructions on previewing print jobs, refer to the following topics, as appropriate for your computer
and operating system.
• Previewing Images Before Printing (Windows) (→P.469)
• Previewing Images Before Printing (Mac OS X) (→P.521)
• Previewing Images Before Printing (Mac OS 9) (→P.544)
Software 509
Windows
Media Detailed Settings Dialog Box (Windows)
The Media Detailed Settings dialog box offers the following settings. For details on settings items, refer to
the printer driver help.
Note
• To display the Media Detailed Settings dialog box, on the Main Sheet (Windows) (→P.474) , click
Settings by Media Type.
Setting Item
Description
A Media Type
Select the paper type.
For information on the types of paper the printer supports, refer to the Paper
Reference Guide . (→P.107)
B Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Drying
Time setting is only valid for rolls.
(→P.135)
C Between Pages
Specify the time the printer waits after printing a page until ejecting the
paper, as needed.
D Between Scans
Specify the time the printer waits after printing a line on the page until
printing the next line, as needed.
E Roll Paper Margin for
Safety
F Near End Margin
You can specify the length of a margin on the leading edge of paper to
ensure that paper susceptible to curling is held rmly against the Platen .
Specify the length of the Near End Margin (the leading edge margin) of the
roll, as needed.
G Cut Speed
Select the speed of automatic cutting, as needed. You can adjust this setting
if paper is not cut well when automatic cutting is used.
H Calibration Value
You can specify whether to apply the results of calibration performed on the
printer to image processing.
I Mirror
Specify whether to print a mirror image, as needed. Select this option to print
a version of the document or image with the left and right sides inverted.
510 Software
Windows
Media Size Options Dialog Box (Windows)
In the Media Size Options dialog box, you can create and register your own Custom Media Size. The sizes
you dene are listed with standard media sizes for selection later as needed.
Note
• To display the Media Size Options dialog box, on the Page Setup Sheet (Windows) (→P.478) , click
Media Size Options.
Setting Item
Description
A Media Size List
Shows the names and sizes of paper that can be used with the printer
driver.
B Delete
Custom media sizes created by users can be deleted from the Media Size
List , as needed.
However, they cannot be deleted in the following situations.
• If a standard media size of the printer driver is selected.
• If an oversized media size is selected.
• If a media size in a red box is selected.
C Custom Media Size Name
You can name Custom Media Size as desired.
D Units
Specify the desired unit of measure for the Custom Media Size height
and width.
E Media Size
Specify the desired Width and Height . You can make your selection
from sizes that are compatible with Borderless Printing by selecting
Borderless Printing Size . To maintain the aspect ratio of the Width
and Height as you resize the paper, select Fix the Ratio of the Width
to Height .
F Add
Enables you to register the custom media size you have specied or
overwrite an existing custom media size.
G Display Series
You can limit the number of options shown in Page Size , Media Size ,
and Media Size List .
Software 511
Windows
Printing Enlargements of Scanned Originals from a Color
imageRUNNER (Windows)
Scanned originals from a Color imageRUNNER can be enlarged and printed automatically.
Originals you create by scanning with a Color imageRUNNER are transferred to a "hot folder" and printed
automatically after enlargement according to printing conditions you specify for that folder.
This processing sequence is called the Color imageRUNNER Enlargement Copy function.
To use Color imageRUNNER Enlargement Copy, rst complete these settings in the following order.
1. Register a hot folder on your computer
Register a hot folder on your computer for storing scanned originals from the Color imageRUNNER
and complete the settings for enlargement copy.
2. Complete the scanning settings on the Color imageRUNNER.
Congure the Color imageRUNNER to send scanned originals to the hot folder.
After these settings are complete, you can print enlarged copies of scanned originals from the Color
imageRUNNER.
Registering a hot folder on your computer
Folders used for Color imageRUNNER Enlargement Copy (iR enlargement copy) are called hot folders.
Register a hot folder on your computer for storing scanned originals from the Color imageRUNNER. You can
specify printing conditions (such as the image quality and paper size), based on which originals transferred to
the hot folder will be printed. Follow these steps to register and modify hot folders.
1.
2.
Display the printer driver dialog box. (→P.499)
3.
Click B Color imageRUNNER Enlargement Copy to start the Color imageRUNNER
Click the Utility tab to display the Utility sheet.
Enlargement Copy utility.
4.
Use the Color imageRUNNER Enlargement Copy utility to register or modify hot folders.
For instructions on registering and modifying hot folders, refer to the help le for the Color
imageRUNNER Enlargement Copy utility.
512 Software
Windows
Completing the scanning settings on the Color imageRUNNER.
Congure the Color imageRUNNER to send scanned originals to the hot folder. It is easy to send scanned
originals to the hot folder if you assign the scanning settings and destination to a Favorites button on the
Color imageRUNNER.
For instructions on assigning scanning settings and destinations to a Favorites button, refer to the setting
manual, displayed by clicking Color imageRUNNER Enlargement Copy Setup Manual button of Color
imageRUNNER Enlargement Copy utility, or refer to the Color imageRUNNER manual.
Scanning the original and print an enlargement
Follow the steps below to scan an original on the Color imageRUNNER for enlarged printing on the printer.
For detailed instructions, refer to the Color imageRUNNER manual.
1.
2.
3.
4.
Load the original on the platen glass or document feeder of the Color imageRUNNER.
Press Send to display the screen for transmission.
Press Favorites, and then press the Favorites button assigned to the hot folder.
Press Start on the control panel. If you scan originals on the platen glass, after scanning all
originals, press Done on the touch-panel display.
Scanned originals are sent to the hot folder and automatically enlarged and printed following the
conditions you specied for the folder.
Note
• For details on Color imageRUNNER Enlargement Copy, refer to Color imageRUNNER Enlargement
Copy Guide .
Software 513
Windows
Special Settings Dialog Box (Windows)
If the printing results are not as you expected, you can change how printing is processed in the Special
Settings dialog box.
Note
• To display the Special Settings dialog box, on the Layout Sheet (Windows) (→P.480) , click Special
Settings.
Setting Item
Description
A FineZoom Settings
This function is used in large-format printing. Normally, choose Auto . If
documents are not printed correctly on large-format media, it may help to
select Yes , and if ne lines are not visible or if images are distorted when
printed, it may help to select No .
B Fast Graphic Process
If image colors are inconsistent in printed documents or if lines are printed
in varying thicknesses, clearing this option may help produce the expected
results.
C Application Color
You can give applications priority in color management.
Matching Priority
514 Software
Windows
View Settings Dialog Box for the Printing Application
(Windows)
In the View Settings dialog box, you can check details of the selected printing application.
Note
• To display the View Settings dialog box, on the Main Sheet (Windows) (→P.474) , click View Settings
by Print Target.
Setting Item
Description
A Print Target
Shows all Print Target options (settings items for the printing application).
B Name
Identies the item selected in Print Target by its name and an icon.
C Details
Here, you can conrm detailed settings values for each listed item for the
selected Print Target .
Software 515
Mac OS X
Mac OS X
Printer Driver Settings (Mac OS X)
For instructions on accessing the Mac OS X printer driver, refer to the following topics.
• Accessing the Printer Driver Dialog Box from Applications (Mac OS X) (→P.535)
For information on the Mac OS X printer driver settings, refer to the following topics.
• Main Pane (Mac OS X) (→P.523)
You can specify the media type, color processing, print quality, print preview, and other settings. Choose
Easy Settings to specify basic print settings based on the printing application or Advanced Settings
to complete more detailed settings as desired.
•
•
•
•
•
Media Detailed Settings Dialog Box (Mac OS X) (→P.539)
View Settings Dialog Box for the Printing Application (Mac OS X) (→P.540)
Color Settings Pane: Color (Mac OS X) (→P.536)
Color Settings Pane: Monochrome (Mac OS X) (→P.538)
Gray Adjustment Pane (Mac OS X) (→P.528)
• Page Setup Pane (Mac OS X) (→P.525)
You can specify the page size of the original, borderless printing, enlargement or reduction, the
orientation, the media size and source, and automatic cutting.
• Utility Pane (Mac OS X) (→P.527)
You can specify settings related to maintenance for the Printhead and feed amount, as well as settings
for Color imageRUNNER Enlargement Copy.
• Additional Settings Pane (Mac OS X) (→P.529)
You can specify settings for how print jobs are sent to the printer.
• Support Pane (Mac OS X) (→P.530)
You can view support information and the user’s manual.
With the imagePROGRAF Free Layout feature, you can arrange originals from various source applications
on a single page before printing. For details, see the Free Layout Guide .
With the imagePROGRAF Preview feature, you can check the layout before printing and adjust layout or size
settings while viewing a preview screen. For details, see the imagePROGRAF Preview Guide .
With the Color imageRUNNER Enlargement Copy feature, you can automatically enlarge and print scanned
originals from a Color imageRUNNER. For details, see the Color imageRUNNER Enlargement Copy Guide .
516 Software
Mac OS X
Conrming Print Settings (Mac OS X)
There are two ways to conrm what printing conditions have been specied, as follows.
• Checking a preview of the settings (→P.517)
• Checking a print preview (→P.518)
Checking a preview of the settings
A preview of the settings is displayed on the left side of the Main, Page Setup, Utility, and Additional
Settings panes. By checking images and numerical values in the preview, you can conrm current settings
for the page size, orientation, media source, and so on.
Display Area
Information Displayed
Pane displayed when the Images tab is
clicked
On top, illustrations indicate the page size of the original, the
paper size, orientation, layout, borderless printing selection,
color mode, and other settings information.
Under this, the page size, paper size, and method and
percentage of enlargement or reduction is displayed.
Pane displayed when the Size tab is
clicked
Paper size details are indicated numerically.
Pane with printer and paper illustrations
Illustrations indicate the media source, orientation, borderless
printing selection, and other settings information.
Software 517
Mac OS X
Note
• To conrm the Print Target specied in Easy Settings, click F View set. on the Main pane to display
the View settings dialog box.
Checking a print preview
You can check an image of the original just as it will be printed.
Conrming the image of print jobs beforehand helps prevent printing errors.
For details on print previews, see “Previewing Images Before Printing (Mac OS X)”. (→P.521)
518 Software
Mac OS X
Checking the Layout Before Printing
You can check the print layout on the preview screen. While viewing this screen, you can also adjust layout or
size settings, and your changes will be instantly applied on the preview screen.
Preview (Macintosh)
Important
• The driver must be installed from the User Software CD-ROM to use this function.
For instructions on how to check the layout before printing, refer to the following topics:
• Checking the Layout Before Printing (Mac OS X) (→P.520)
Software 519
Mac OS X
Checking the Layout Before Printing (Mac OS X)
This topic describes how to check the layout before printing using the Preview function.
1.
2.
Choose Print in the application menu.
3.
The Canon imagePROGRAF Preview window is displayed.
4.
5.
Check the layout and adjust settings in the Canon imagePROGRAF Preview window as desired.
Click PDF and select Canon imagePROGRAF Preview.
Print from the Canon imagePROGRAF Preview menu.
Note
• For details on imagePROGRAF Preview functions, refer to imagePROGRAF Preview Guide .
520 Software
Mac OS X
Previewing Images Before Printing (Mac OS X)
This topic describes how to preview images of print jobs before actually printing them.
1.
2.
3.
In the application menu, choose Print.
Click Preview to open the preview window.
Check the layout and other aspects of the printing image, and then click Print to start printing.
Note
• “Preview” is provided as a standard feature of the operating system. For details, refer to the Mac OS
documentation.
Software 521
Mac OS X
Paper Information on Printer Dialog Box (Mac OS X)
On the Paper Information on Printer dialog box, you can obtain information on the paper in the printer and
congure printer driver media type setting.
Note
• To display the Paper Information on Printer dialog box, on the Main Pane (Mac OS X) (→P.523) ,
click Get Information by Media Type.
Setting Item
A Media Source
522 Software
Description
Shows the Media Source supported by the printer, as well as the type of
paper loaded. To update the media type setting in the printer driver, select
the desired Media Source option and click OK .
Mac OS X
Main Pane (Mac OS X)
The following settings are available on the Main pane. For details on settings items, refer to the printer
driver help.
Note
• On the Main pane, choose Easy Settings to specify basic print settings based on the print target, or
switch to Advanced Settings to complete more detailed settings as desired.
Conguration using Easy Settings
Setting Item
A Media Type
Description
Select the paper type.
For information on the types of paper the printer supports, refer to the Paper
Reference Guide . (→P.107)
B Get Information
Click to display the Get Information dialog box, which shows media types
specied on the printer for each media source. When you select a media
source, your selection is applied to the printer driver settings for the media
source and media type.
C Set
Click to display the Media Detailed Settings dialog box for ink drying time
and other detailed settings based on the paper type.
E Print Target
F View set.
L Printer Information
Choose presets that match the type of document to be printed.
Printing Photos and Images (Windows, Mac OS X) (→P.207)
Printing Line Drawings and Text (Windows, Mac OS X) (→P.211)
Printing Ofce Documents (→P.213)
Click to display the View settings dialog box, which enables you to conrm
the settings for the selected item from the E Print Target list or change the
order of items listed in E Print Target .
Click to display the Printer dialog box, which indicates the ink levels and
gives other information about the printer.
Software 523
Mac OS X
Conguration using Advanced Settings
Setting Item
A Media Type
Description
Select the paper type.
For information on the types of paper the printer supports, refer to the Paper
Reference Guide . (→P.107)
B Get Information
Click to display the Get Information dialog box, which shows media types
specied on the printer for each media source. When you select a media
source, your selection is applied to the printer driver settings for the media
source and media type.
C Set
Click to display the Media Detailed Settings dialog box for ink drying time
and other detailed settings based on the paper type.
E Print Priority
Choose the graphic elements that you want to emphasize for printing.
Giving Priority to Particular Graphic Elements and Colors for Printing
(→P.203)
F Print Quality
Choose the level of print quality.
Giving Priority to Particular Graphic Elements and Colors for Printing
(→P.203)
H Color Mode
Choose the color mode.
Giving Priority to Particular Graphic Elements and Colors for Printing
(→P.203)
I Set
Click to display the Color Settings dialog box for more advanced color
settings.
Adjusting the Color in the Printer Driver (→P.214)
J Unidirectional Printing
Although unidirectional printing is slower, it can help prevent misaligned
lines and ensure better results.
K High-Precision Printing
Select this option for printing at the highest level of quality. However, this
will take more time than regular printing.
L Printer Information
Click to display the Printer dialog box, which indicates the ink levels and
gives other information about the printer.
524 Software
Mac OS X
Page Setup Pane (Mac OS X)
The following settings are available on the Page Setup pane. For details on settings items, refer to the
printer driver help.
Setting Item
Description
A Media Source
Choose how paper is supplied.
Options displayed in the list vary depending on the selection in A Media
Type in the Main pane.
B Roll Paper Width
Displays the paper width of the roll loaded in the printer. Unknown is
displayed if the printer cannot detect the roll paper width.
C Page Size
Displays the size of the original, as specied in the page settings of the
application.
For details on page sizes available in the application.see “Paper Sizes”.
(→P.112)
D Enlarged/Reduced Printing Choose from the following options when this setting is activated.
Resizing Originals to Match the Paper Size (→P.273)
Resizing Originals to Fit the Roll Width (→P.274)
Resizing Originals by Entering a Scaling Value (→P.275)
E Fit Media Size
Resizes the document image to match the paper size.
F Fit Roll Paper Width
Resizes the document image to match the roll width.
G Scaling
Resizes the document image based on a specied scaling value. Enter a
value in a range of “5-600.”
H Borderless Printing
Borderless printing is available if Roll Paper is selected in the A Media
Source list.
Activate this setting for borderless printing to match the size and width
of the paper.
Borderless Printing on Paper of Equivalent Size (→P.325)
Borderless Printing by Resizing Originals to Fit the Roll Width (→P.327)
Borderless Printing at Actual Size (→P.307)
I Media Size
Choose the size of the paper you will print on.
Click Display all selections for Media Size to list available sizes.
For details on available paper sizes, see “Paper Sizes”. (→P.112)
Software 525
Mac OS X
Setting Item
J Print Centered
Description
Activate this setting to print document images in the center of the paper.
Printing Originals Centered on Rolls (→P.405)
Printing Originals Centered on Sheets (→P.406)
K No Spaces at Top or Bottom Activate this setting to print the next image skipping blank areas above
and below printable data in documents, which enables you to conserve
the paper.
Conserving Roll Paper by Printing Originals Without Top and Bottom
Margins (→P.423)
L Rotate Page 90 degrees
526 Software
Activate this setting to rotate the original 90 degrees before printing.
Conserving Roll Paper by Rotating Originals 90 Degrees (→P.422)
Mac OS X
Utility Pane (Mac OS X)
The following settings are available on the Utilitypane.
Setting Item
Description
A Set
Click to display the Printer dialog box, which offers the following
maintenance for the printer.
• Nozzle (ink ejecting outlet) cleaning
• Head alignment adjustment
• Feed amount adjustment
B View
Click to start imagePROGRAF Printmonitor , which enables you to view
the status of print jobs.
C Set
Click to complete the settings for Auto Arrange or Color imageRUNNER
Enlargement Copy (iR enlargement copy).
*1: For details, see Color imageRUNNER Enlargement Copy Guide .
Software 527
Mac OS X
Gray Adjustment Pane (Mac OS X)
The following settings are available on the Gray Adjustment pane.
Gray Adjustment
On the Gray Adjustment pane, you can adjust the color balance, brightness, contrast, and other image
qualities.
Note
• To display the Gray Adjustment pane, on the Main Pane (Mac OS X) (→P.523) , select Monochrome
(Photo) by Color Mode in Advanced Settings, and then click Color Settings.
• Monochrome (Photo) is not available for all types of paper.
Setting Item
Description
A Sample
The image at left is updated to reect any changes you make to setting
items on the sheet, enabling you to check the results of adjustment.
B Sample List
Select a sample image, as desired.
C Color Balance
Click the list to select a color balance that suits the printing application.
DX
Adjust the color balance as you check the color tone in the adjustment area.
You can adjust the square area in the center by clicking or dragging it.
Drag the vertical or horizontal scroll bars for adjustment, as desired.
You can click the arrows by the X (horizontal) and Y (vertical) boxes or enter
the values directly.
EY
F Brightness
Adjust the overall image brightness as desired. You can adjust the
brightness if the printed document is lighter or darker than the original image
(that is, the original photo that was scanned or the original graphic as it
appears on the computer screen).
G Contrast
Adjust the contrast of the darkest and lightest portions relative to each other,
as desired. Increasing the Contrast makes images sharper, and reducing
the Contrast softens images.
H Highlight
Adjust the brightness of the lightest portion.
I Shadow
Adjust the brightness of the darkest portion.
528 Software
Mac OS X
Additional Settings Pane (Mac OS X)
The following settings are available on the Additional Settingspane.
Setting Item
A Data Send Method
Description
Choose how printing data is sent to the printer.
• B Send Print Data Immediately to Printer
• C Send All Print Data as Batch to Printer
Software 529
Mac OS X
Support Pane (Mac OS X)
On the Support pane, you can view support information and the user’s manual.
Button
Corresponding Utility
A Support Information
Click to access the Canon support webpage,
where you can nd the latest information on the
printer and consumables, check for printer driver
updates, and browse other information.
B User Manual
Click to view the printer user’s manual. This
function requires the user’s manual to be installed
on your computer.
C Settings
The settings can be saved as a le. Click to
display the Export dialog box, which enables you
to specify where to save the le.
D About
You can display version information for the printer
driver.
Using Favorites (Mac OS X)
You can use the Presets function in Mac OS X for favorite-based printing.
Note
• In the printing dialog box, click Save As in the Presets list to save the current print settings. This is a
standard feature of the operating system. For details, refer to the Mac OS documentation.
530 Software
Mac OS X
Printing Adobe RGB Images (Mac OS X)
This topic describes how to print Adobe RGB images based on the following example.
•
•
•
•
•
Document: Adobe RGB image created in Photoshop
Page size: 10×12 inches (254.0×304.8 mm)
Paper: Roll
Paper type: Glossy Photo Paper
Roll Width: 10 inches (254.0 mm)
Important
• Do not set up color-matching in Photoshop.
• In the printer driver, specify Driver Correction and set Color Space to Adobe RGB.
1.
In Photoshop, create an image in the Adobe RGB color space.
Note
• Photoshop CS2 is used in this example.
• For instructions on creating Adobe RGB images, refer to the Photoshop documentation.
2.
3.
4.
5.
6.
Choose Print with Preview from the Photoshop menu to display the Print dialog box.
7.
In the A Media Type list, select the type of paper that is loaded. In this case, click Glossy
Make sure the setting mode is Color Management.
In the Color Handling list in Options, click No Color Management.
Click Print.
Access the Main pane.
Photo Paper.
Software 531
Mac OS X
8.
9.
10.
Click D Advanced Settings to switch the print mode.
Click Image in the E Print Priority list.
Select the print quality in the F Print Quality list.
Note
• Options displayed in the F Print Quality list vary depending on the paper type.
11.
12.
13.
14.
15.
16.
17.
Click Color in the H Color Mode list.
Click I Set to display the Color Settings dialog box.
Click Matching to display the Matching pane.
In Mode, click Driver Correction.
In Color Space, click Adobe RGB.
Click OK to close the Color Settings dialog box.
Access the Page Setup pane.
532 Software
Mac OS X
18.
19.
Click Roll Paper in the A Media Source list.
Make sure the width of the loaded roll paper is displayed in the B Roll Paper Width list-here,
10-in. Roll (254.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on
the Main pane and update the printer information.
20.
Make sure the page size as specied in Photoshop is shown in C Page Size -in this case,
10"x12".
21.
Conrm the print settings, and click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.517)
Software 533
Mac OS X
imagePROGRAF Printmonitor (Macintosh)
imagePROGRAF Printmonitor is a utility for checking the printer status and managing print jobs.
•
•
•
•
Printer status can be checked in real time on a computer monitor.
You can check the status of print jobs, cancel jobs, and manage them as needed.
If a printer error occurs, you can investigate the corrective action immediately.
You can also set up automatic email notication of any printer problems or errors to email addresses you
designate in advance.
Note
• If the status of the desired printer is not shown in imagePROGRAF Printmonitor, select the printer
again as follows.
1. Make sure the printer is on and connected to the network or to a local port.
2. In the Printer menu, select the name of the desired printer.
After the printer is detected, the printer status is shown.
3. If information about the printer is not shown in step 2, choose Search Printer in the Printer menu.
4. Select the zone to search (or select *(My Zone) if no zones have been set up) and click the
Search button.
Printer names listed in the Printer menu are updated with the printers that are now detected.
5. In the Printer menu, select the name of the desired printer.
After the printer is detected, the printer status is shown.
534 Software
Mac OS X
Accessing the Printer Driver Dialog Box from
Applications (Mac OS X)
1.
In the application software, select Print from the File menu to display the dialog box for printing
conditions.
Note
• This dialog box includes basic printing options and enables you to choose the printer, specify the
range of pages, number of copies, and so on.
2.
Select the printer in the Printer list.
3.
Click Print to start printing.
As shown in the following illustration, you can switch to other panes in this dialog box to complete
settings for various methods of printing, including enlarged and reduced printing, borderless
printing, and so on.
Software 535
Mac OS X
Color Settings Pane: Color (Mac OS X)
In general, make any needed adjustments to the color of documents in the application used to create them.
However, if the color tone as printed is not as you expected, you can also adjust the color in the printer driver.
Color Adjustment pane: color
If the color tone as printed is not as you expected, you can adjust it on the Color Adjustment pane.
Note
• To display the Color Adjustment pane, on the Main Pane (Mac OS X) (→P.523) , click Color Settings
by Color Mode in Advanced Settings.
Setting Item
Description
A Preview
The image at left is updated to reect any changes you make to setting
items on the pane, enabling you to check the results of adjustment.
B Original
The image at right shows the original state before adjustment. You can
compare it to the Preview image.
C Cyan
Correct color tones by adjusting the levels of each color.
D Magenta
E Yellow
F Brightness
Adjust the overall image brightness as desired. You can adjust the
brightness if the printed document is lighter or darker than the original
image (that is, the original photo that was scanned or the original graphic
as it appears on the computer screen).
G Contrast
Adjust the contrast of the darkest and lightest portions relative to each
other, as desired. Increasing the Contrast makes images sharper, and
reducing the Contrast softens images.
H Saturation
Adjust the color intensity as desired. Increasing the Saturation setting
makes colors more vivid, and reducing the Saturation makes colors more
subdued.
I Gray Tone
Adjust the color tone of grays as desired. Choose Cool Black (tinged with
blue), Warm Black (tinged with red), and so on.
536 Software
Mac OS X
Note
• For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P.214)
Matching pane
On the Matching pane, you can specify color matching, to compensate for differences in the appearance
of colors on various devices.
Note
• To display the Matching pane, on the Main Pane (Mac OS X) (→P.523) , click Color Settings by Color
Mode in Advanced Settings, and then click Matching.
Setting Item
Description
A Matching Mode
Select the color matching mode to use, as desired.
B Matching Method
Select the matching method that suits the document to be printed. Various
Matching Method options are available depending on your selection in
Matching .
C Color Space
Select the applicable color space as desired.
Note
• For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P.214)
Software 537
Mac OS X
Color Settings Pane: Monochrome (Mac OS X)
The following settings are available on the Color Settings pane for monochrome printing.
Color Adjustment pane: monochrome
On the Color Adjustment pane for monochrome printing, you can adjust the brightness and contrast.
Note
• To display the Color Adjustment pane, on the Main Pane (Mac OS X) (→P.523) , click Color Settings
in Advanced Settings.
Setting Item
Description
A Preview
The image at left is updated to reect any changes you make to setting
items on the pane, enabling you to check the results of adjustment.
B Original
The image at right shows the original state before adjustment. You can
compare it to the Preview image.
C Cyan
Not available.
D Magenta
E Yellow
F Brightness
Adjust the overall image brightness as desired. You can adjust the
brightness if the printed document is lighter or darker than the original
image (that is, the original photo that was scanned or the original graphic
as it appears on the computer screen).
G Contrast
Adjust the contrast of the darkest and lightest portions relative to each
other, as desired. Increasing the Contrast makes images sharper, and
reducing the Contrast softens images.
H Saturation
Not available.
I Gray Tone
Not available.
Note
• For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P.214)
538 Software
Mac OS X
Media Detailed Settings Dialog Box (Mac OS X)
The Media Detailed Settings dialog box offers the following settings. For details on settings items, refer to
the printer driver help.
Note
• To display the Media Detailed Settings dialog box, on the Main Pane (Mac OS X) (→P.523) , click
Settings by Media Type.
Setting Item
Description
A Media Type
Select the paper type.
For information on the types of paper the printer supports, refer to the Paper
Reference Guide . (→P.107)
B Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Drying
Time setting is only valid for rolls.
(→P.135)
C Between Pages
Specify the time the printer waits after printing a page until ejecting the
paper, as needed.
D Between Scans
Specify the time the printer waits after printing a line on the page until
printing the next line, as needed.
E Roll Paper Margin for
Safety
F Near End Margin
You can specify the length of a margin on the leading edge of paper to
ensure that paper susceptible to curling is held rmly against the Platen .
Specify the length of the Near End Margin (the leading edge margin) of the
roll, as needed.
G Cut Speed
Select the speed of automatic cutting, as needed. You can adjust this setting
if paper is not cut well when automatic cutting is used.
H Automatic Cutting
You can activate or deactivate Automatic Cutting and printing of cut lines,
as desired. In this list, specify Yes , No, or Print Cut Guideline .
I Calibration Value
You can specify whether to apply the results of calibration performed on the
printer to image processing.
J Mirror
Specify whether to print a mirror image, as needed. Select this option to print
a version of the document or image with the left and right sides inverted.
Software 539
Mac OS X
View Settings Dialog Box for the Printing Application
(Mac OS X)
In the View Settings dialog box, you can check details of the selected printing application.
Note
• To display the View Settings dialog box, on the Main Pane (Mac OS X) (→P.523) , click View Settings
by Print Target.
Setting Item
Description
A Print Target
Shows all Print Target options (settings items for the printing application).
B Name
Identies the item selected in Print Target by its name and an icon.
C Details
Here, you can conrm detailed settings values for each item selected in
the Print Target list.
540 Software
Mac OS 9
Mac OS 9
Printer Driver Settings (Mac OS 9)
For instructions on accessing the Mac OS 9 printer driver, refer to the following topics.
• Accessing the Printer Driver Dialog Box from Applications (Mac OS 9) (→P.559)
For information on the Mac OS 9 printer driver settings, refer to the following topics.
• Main Pane (Mac OS 9) (→P.545)
You can specify the number of copies, page range, media type, color processing, print quality, and print
preview. Choose Easy Settings to specify basic print settings based on the printing application or
Advanced Settings to complete more detailed settings as desired.
•
•
•
•
•
Media Detailed Settings Dialog Box (Mac OS 9) (→P.566)
View Settings Dialog Box for the Printing Application (Mac OS 9) (→P.568)
Color Settings Pane: Color (Mac OS 9) (→P.561)
Color Settings Pane: Monochrome (Mac OS 9) (→P.564)
Gray Adjustment Pane (Mac OS 9) (→P.550)
• Page Setup Pane (Mac OS 9) (→P.547)
You can specify the amount of enlargement or reduction, borderless printing, media size, and page
layout.
• Finishing Pane (Mac OS 9) (→P.549)
You can specify the media source, watermarks, and orientation.
• Device Settings Pane (Mac OS 9) (→P.551)
You can perform maintenance for the Printhead or feed amount.
• Additional Settings Pane (Mac OS 9) (→P.552)
You can specify settings for background printing, how print jobs are sent to the printer, and notication
after printing.
• Special Settings Dialog Box (Mac OS 9) (→P.567)
Software 541
Mac OS 9
Conrming Print Settings (Mac OS 9)
There are two ways to conrm what printing conditions have been specied, as follows.
• Checking a preview of the settings (→P.542)
• Checking a print preview (→P.543)
Checking a preview of the settings
A preview of the settings is displayed on the left side of the Main, Page Setup, Finishing, Utility, and
Additional Settings panes. By checking images and numerical values in the preview, you can conrm
current settings for the page size, orientation, media source, and so on.
Display Area
Information Displayed
Pane displayed when the H Images tab
is clicked
On top, illustrations indicate the page size of the original, the
paper size, orientation, layout, borderless printing selection,
color mode, and other settings information.
Under this, the page size, paper size, and method and
percentage of enlargement or reduction is displayed.
Pane displayed when the I Size tab is
clicked
Paper size details are indicated numerically.
Pane with printer and paper illustrations
Illustrations indicate the media source, orientation, borderless
printing selection, and other settings information.
542 Software
Mac OS 9
Note
• To conrm the Print Target specied in Easy Settings, click G View set. on the Main pane to display
the View set. dialog box.
Checking a print preview
You can check an image of the original just as it will be printed.
Conrming the image of print jobs beforehand helps prevent printing errors.
For details on print previews, see “Previewing Images Before Printing (Mac OS 9)”. (→P.544)
Software 543
Mac OS 9
Previewing Images Before Printing (Mac OS 9)
This topic describes how to preview images of print jobs before actually printing them.
1.
2.
3.
In the application menu, choose Print.
Click Preview to open the preview window.
Check the layout and other aspects of the printing image, and then click Print this page
to start printing.
Note
• “Preview” is provided as a standard feature of the operating system. For details, refer to the Mac OS
documentation.
544 Software
Mac OS 9
Main Pane (Mac OS 9)
The following settings are available on the Main pane. For details on settings items, refer to the printer
driver help.
Note
• On the Main pane, choose Easy Settings to specify basic print settings based on the printing
application, or switch to Advanced Settings to complete more detailed settings as desired.
Conguration using Easy Settings
Setting Item
Description
A Copies
Enter the number of copies to print, in a range of “1-999.”
B Page
Specify the pages to print.
• All Pages
• From and To
C Media Type
Select the paper type.
For information on the types of paper the printer supports, refer to the Paper
Reference Guide . (→P.107)
D Set
F Print Target
G View set.
L Printer
Click to display the Media Detailed Settings dialog box for ink drying time
and other detailed settings based on the paper type.
Choose presets that match the type of document to be printed.
Printing Photos and Images (Mac OS 9) (→P.209)
Printing Line Drawings and Text (Mac OS 9) (→P.212)
Printing Ofce Documents (→P.213)
Click to display the View set. dialog box, which enables you to conrm the
settings for the selected item from the F Print Target list or change the
order of items listed in F Print Target .
Click to display the Printer Information dialog box, which indicates the ink
levels and gives other information about the printer.
Software 545
Mac OS 9
Conguration using Advanced Settings
Setting Item
Description
A Copies
Enter the number of copies to print, in a range of “1-999.”
B Page
Specify the pages to print.
• All Pages
• From and To
C Media Type
Select the paper type.
For information on the types of paper the printer supports, refer to the Paper
Reference Guide . (→P.107)
D Set
Click to display the Media Detailed Settings dialog box for ink drying time
and other detailed settings based on the paper type.
F Print Priority
Choose the graphic elements that you want to emphasize for printing.
Giving Priority to Particular Graphic Elements and Colors for Printing
(→P.203)
G Print Quality
Choose the level of print quality.
Giving Priority to Particular Graphic Elements and Colors for Printing
(→P.203)
H Color Mode
Choose the color mode.
Giving Priority to Particular Graphic Elements and Colors for Printing
(→P.203)
I Set
Click to display the Color Settings dialog box for more advanced color
settings.
Adjusting the Color in the Printer Driver (→P.214)
J Unidirectional Printing
Although unidirectional printing is slower, it can help prevent misaligned
lines and ensure better results.
Depending on the printing conditions, unidirectional printing may be the
default setting even if you do not choose it. In this case, the printing speed
will not change if you activate the setting.
K Thicken Fine Lines
Activate this option to print ne lines more distinctly.
L Printer
Click to display the Printer Information dialog box, which indicates the ink
levels and gives other information about the printer.
546 Software
Mac OS 9
Page Setup Pane (Mac OS 9)
The following settings are available on the Page Setup pane. For details on settings items, refer to the
printer driver help.
Setting Item
Description
A Roll Paper Width
Displays the paper width of the roll loaded in the printer.
B Page Size
Displays the page size, as specied in the source application.
For details on paper sizes available from the source application, see
“Paper Sizes”. (→P.112)
C Enlarged/Reduced Printing
Choose from the following options when this setting is activated.
Resizing Originals to Match the Paper Size (→P.273)
Resizing Originals to Fit the Roll Width (→P.274)
Resizing Originals by Entering a Scaling Value (→P.275)
D Fit Media Size
Scales the document image to match the paper size.
E Fit Roll Paper Width
Scales the document image to match the roll width.
F Scaling
Resizes the document image based on a specied scaling value. Enter a
value in a range of “5-600.”
G Borderless Printing
Borderless printing is available if Roll Paper is selected from the A
Media Source list in the Finishing Pane (Mac OS 9). (→P.549)
Activate this setting for borderless printing to match the size and width
of the paper.
Borderless Printing on Paper of Equivalent Size (→P.325)
Borderless Printing by Resizing Originals to Fit the Roll Width (→P.327)
Borderless Printing at Actual Size (→P.307)
H Media Size
Choose the size of the paper you will print on.
For details on available paper sizes, see “Paper Sizes”. (→P.112)
I Page Layout
Activate this option to select the page layout when printing multiple pages
per sheet.(*1)
Printing Multiple Pages Per Sheet (→P.383)
Printing Posters in Sections (→P.384)
Software 547
Mac OS 9
Setting Item
Description
J Layout Direction
This setting is available when I Page Layout is selected. Here, you can
specify the orientation of multiple pages to be printed on a single sheet.
K Page Border
This setting is available when I Page Layout is selected. Here, you can
specify the type of boundary line around each page of multiple pages
printed on a single sheet.
*1: Selecting poster layout from the I Page Layout list displays a check box for specifying the pages to
print.
548 Software
Mac OS 9
Finishing Pane (Mac OS 9)
The following settings are available on the Finishing pane. For details on settings items, refer to the printer
driver help.
Setting Item
Description
A Media Source
You can choose the media source.
Options displayed in the list vary depending on the selection in C Media
Type in the Main Pane (Mac OS 9). (→P.545)
B Roll Paper Width
Displays the paper width of the roll loaded in the printer. Unknown is
displayed if the printer cannot detect the roll paper width.
C Watermark
Activating this option makes two settings available, D Watermarks and
E Edit Watermark .
Printing With Watermarks (→P.445)
D Watermarks
Lists the provided watermarks. Choose the watermark to print.
E Edit Watermark
Click to display the Edit Watermark dialog box for creating your own,
original watermark.
F Print Centered
Choose this option to print the document images in the center of the
paper.
Printing Originals Centered on Rolls (→P.405)
Printing Originals Centered on Sheets (→P.406)
G Rotate 180 degrees
Activate this setting to rotate the document image by 180 degrees before
printing.
H No Spaces at Top or Bottom Activate this setting to print the next image skipping blank areas above
and below printable data in documents, which enables you to conserve
the paper.
Conserving Roll Paper by Printing Originals Without Top and Bottom
Margins (→P.423)
I Rotate Page 90 degrees
Activate this setting to rotate the document image by 90 degrees before
printing.
Conserving Roll Paper by Rotating Originals 90 Degrees (→P.422)
Software 549
Mac OS 9
Gray Adjustment Pane (Mac OS 9)
The following settings are available on the Gray Adjustment pane.
Gray Adjustment
On the Gray Adjustment pane, you can adjust the color balance, brightness, contrast, and other image
qualities.
Note
• To display the Gray Adjustment pane, on the Main Pane (Mac OS 9) (→P.545) , select Monochrome
(Photo) by Color Mode in Advanced Settings, and then click Color Settings.
• Monochrome (Photo) is not available for all types of paper.
Setting Item
Description
A Sample
The image at left is updated to reect any changes you make to setting
items on the sheet, enabling you to check the results of adjustment.
B Sample List
Select a sample image, as desired.
C Color Balance
Click the list to select a color balance that suits the printing application.
DX
Adjust the color balance as you check the color tone in the adjustment area.
You can adjust the square area in the center by clicking or dragging it.
Drag the vertical or horizontal scroll bars for adjustment, as desired.
You can click the arrows by the X (horizontal) and Y (vertical) boxes or enter
the values directly.
EY
F Brightness
Adjust the overall image brightness as desired. You can adjust the
brightness if the printed document is lighter or darker than the original image
(that is, the original photo that was scanned or the original graphic as it
appears on the computer screen).
G Contrast
Adjust the contrast of the darkest and lightest portions relative to each other,
as desired. Increasing the Contrast makes images sharper, and reducing
the Contrast softens images.
H Highlight
Adjust the brightness of the lightest portion.
I Shadow
Adjust the brightness of the darkest portion.
550 Software
Mac OS 9
Device Settings Pane (Mac OS 9)
The following settings are available on the Device Settings pane.
Setting Item
A Utility
Description
Click to display the Printer Information dialog box, which offers the
following maintenance for the printer.
• Nozzle (ink ejecting outlet) cleaning
• Head alignment adjustment
• Feed amount adjustment
Software 551
Mac OS 9
Additional Settings Pane (Mac OS 9)
The following settings are available on the Additional Settingspane. For details on settings items, refer to
the printer driver help.
Setting Item
Description
A Background Printing
Choose the printing method.
Activate this setting by clicking B On to print in the background.
Deactivate this setting by clicking C Off to print in the
foreground.
D Data Send Method
Choose how printing data is sent to the printer.
• E Send Print Data Immediately to Printer
• F Send All Print Data as Batch to Printer
G Printing Finished Alert Method
Choose how to notify when printing is nished.
Specify how to be notied when printing is nished, by a tone
or a message.
552 Software
H Make a Sound
Activate this setting to be notied by a tone when printing is
nished. You can also choose a different tone.
J Display a Message
Activate this setting to be notied by a dialog box when printing
is nished.
Mac OS 9
Using Favorites (Mac OS 9)
This topic describes how to register favorites and print using favorite settings.
Registering a favorite
Follow the steps below to save the current print settings as a favorite.
1.
2.
3.
4.
5.
Select the printer in Chooser.
6.
Click OK to close the Add Favorite dialog box.
Choose Print in the application menu.
Complete the print settings.
In the Favorites list, click Add Favorite to display the Add Favorite dialog box.
Complete the following settings in the Add Favorite dialog box.
• Enter a desired name in Name, such as “Photos for Presentations” or “Monthly Report.”
• In Comment, enter a description of the favorite to be added.
The favorite you have added is now displayed in Favorites.
Note
• To edit the name of an existing favorite or comment, click Edit Favorite in the Favorites list to
display the Edit Favorite dialog box.
• To save a favorite as a le, click Export and specify the le to save.
Software 553
Mac OS 9
Printing using the favorite
Follow the steps below to print using the favorite you have registered.
1.
2.
Select the printer in Chooser.
3.
4.
5.
6.
Choose the original size in the A Page Size list.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
Click I OK to close the dialog box.
In the application menu, choose Print.
In the Favorites list, choose the favorite you registered.
Note
• To import a favorite, click Import and specify the favorite le.
• If you select a favorite and edit it, an icon is displayed at left of the name to indicate that the settings
have been changed. For details, refer to the printer driver help.
7.
Conrm the print settings, and then click Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
554 Software
Mac OS 9
Printing Adobe RGB Images (Mac OS 9)
This topic describes how to print Adobe RGB images based on the following example.
•
•
•
•
•
Document: Adobe RGB image created in Photoshop
Page size: 10×12 inches (254.0×304.8 mm)
Paper: Roll
Paper type: Glossy Photo Paper
Roll width: 10 inches (254.0 mm)
Important
• Do not set up color-matching in Photoshop.
• In the printer driver, specify Driver Matching Mode and set Color Space to Adobe RGB.
1.
In Photoshop, create an image in the Adobe RGB color space.
Note
• Photoshop CS2 is used in this example.
• For instructions on creating Adobe RGB images, refer to the Photoshop documentation.
2.
3.
In the Photoshop menu, choose Print.
4.
In the C Media Type list, select the type of paper that is loaded. In this case, click Glossy
Make sure the Main pane is displayed.
Photo Paper.
Software 555
Mac OS 9
5.
Click E Advanced Settings to switch the print mode.
6.
7.
Click Image in the F Print Priority list.
Select the print quality in the G Print Quality list.
Note
• Options displayed in the G Print Quality list vary depending on the paper type.
8.
9.
10.
11.
12.
13.
14.
Click Color in the H Color Mode list.
Click I Set to display the Color Settings dialog box.
Click Matching to display the Matching pane.
In Mode, click Driver Correction.
In Color Space, click Adobe RGB.
Click OK to close the Color Settings dialog box.
Access the Page Setup pane.
556 Software
Mac OS 9
15.
Make sure the page size as specied in Photoshop is shown in B Page Size -in this case,
10"x12".
16.
Access the Finishing pane.
17.
18.
Click Roll Paper in the A Media Source list.
Make sure the width of the loaded roll paper is displayed in the B Roll Paper Width list-here,
10-in. Roll (254.0mm).
Note
• If the width of the roll loaded in the printer is not shown in the B Roll Paper Width list, click the L
Printer in the Main pane to update the printer information.
19.
Conrm the print settings, and click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.542)
Software 557
Mac OS 9
imagePROGRAF Printmonitor (Macintosh)
imagePROGRAF Printmonitor is a utility for checking the printer status and managing print jobs.
•
•
•
•
Printer status can be checked in real time on a computer monitor.
You can check the status of print jobs, cancel jobs, and manage them as needed.
If a printer error occurs, you can investigate the corrective action immediately.
You can also set up automatic email notication of any printer problems or errors to email addresses you
designate in advance.
Note
• If the status of the desired printer is not shown in imagePROGRAF Printmonitor, select the printer
again as follows.
1. Make sure the printer is on and connected to the network or to a local port.
2. In the Printer menu, select the name of the desired printer.
After the printer is detected, the printer status is shown.
3. If information about the printer is not shown in step 2, choose Search Printer in the Printer menu.
4. Select the zone to search (or select *(My Zone) if no zones have been set up) and click the
Search button.
Printer names listed in the Printer menu are updated with the printers that are now detected.
5. In the Printer menu, select the name of the desired printer.
After the printer is detected, the printer status is shown.
558 Software
Mac OS 9
Accessing the Printer Driver Dialog Box from
Applications (Mac OS 9)
1.
In the application software, select Print from the File menu to display the dialog box for printing
conditions.
Note
• This dialog box includes basic printing options and enables you to choose the printer, specify the
range of pages, number of copies, and so on.
2.
Select the printer in the Printer list.
Software 559
Mac OS 9
3.
Click Print to start printing.
As shown in the following illustration, you can switch to other panes in this dialog box to complete
settings for various methods of printing, including enlarged and reduced printing, borderless
printing, and so on.
560 Software
Mac OS 9
Color Settings Pane: Color (Mac OS 9)
In general, make any needed adjustments to the color of documents in the application used to create them.
However, if the color tone as printed is not as you expected, you can also adjust the color in the printer driver.
Color Adjustment pane: color
If the color tone as printed is not as you expected, you can adjust it on the Color Adjustment pane.
Note
• To display the Color Adjustment pane, on the Main Pane (Mac OS 9) (→P.545) , click Color Settings
by Color Mode in Advanced Settings.
Setting Item
Description
A Preview
The image at left is updated to reect any changes you make to setting
items on the pane, enabling you to check the results of adjustment.
B Original
The image at right shows the original state before adjustment. You can
compare it to the Preview image.
C Cyan
Correct color tones by adjusting the levels of each color.
D Magenta
E Yellow
F Brightness
Adjust the overall image brightness as desired. You can adjust the
brightness if the printed document is lighter or darker than the original
image (that is, the original photo that was scanned or the original graphic
as it appears on the computer screen).
G Contrast
Adjust the contrast of the darkest and lightest portions relative to each
other, as desired. Increasing the Contrast makes images sharper, and
reducing the Contrast softens images.
H Saturation
Adjust the color intensity as desired. Increasing the Saturation setting
makes colors more vivid, and reducing the Saturation makes colors more
subdued.
Software 561
Mac OS 9
Setting Item
Description
I Gray Tone
Adjust the color tone of grays as desired. Choose Cool Black (tinged with
blue), Warm Black (tinged with red), and so on.
J Object Adjustment
Select this option to display the Object Adjustment dialog box, in which
you can specify objects subject to color adjustment.
Note
• For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P.214)
Object Adjustment dialog box
In the Object Adjustment dialog box, you can specify what type of print jobs to apply color adjustment to. If
an original comprises images, graphics, and text, you can specify which portion to apply color adjustment to.
Note
• To display the Object Adjustment dialog box, click Object Adjustment on the Color Adjustment pane.
Setting Item
Description
A Image
Select this option to apply color adjustment to image areas, such as photos.
B Graphics
Select this option to apply color adjustment to graphics, such as lines and
circles.
C Text
Select this option to apply color adjustment to text.
562 Software
Mac OS 9
Matching pane
On the Matching pane, you can specify color matching, to compensate for differences in the appearance
of colors on various devices.
Note
• To display the Matching pane, on the Main Pane (Mac OS 9) (→P.545) , click Color Settings by Color
Mode in Advanced Settings, and then click Matching.
Setting Item
Description
A Matching Mode
Select the color matching mode to use, as desired.
B Matching Method
Select the matching method that suits the document to be printed. Various
Matching Method options are available depending on your selection in
Matching .
C Color Space
Select the applicable color space as desired.
Note
• For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P.214)
Software 563
Mac OS 9
Color Settings Pane: Monochrome (Mac OS 9)
The following settings are available on the Color Settings pane for monochrome printing.
Color Adjustment pane: monochrome
On the Color Adjustment pane for monochrome printing, you can adjust the brightness and contrast.
Note
• To display the Color Adjustment pane, on the Main Pane (Mac OS 9) (→P.545) , click Color Settings
by Color Mode in Advanced Settings.
Setting Item
Description
A Preview
The image above is updated to reect any changes you make to setting
items on the right of this pane, enabling you to check the results of
adjustment.
B Original
The image on the bottom shows the original state before adjustment. You
can compare it to the Preview image.
C Cyan
Not available.
D Magenta
E Yellow
F Brightness
Adjust the overall image brightness as desired. You can adjust the
brightness if the printed document is lighter or darker than the original
image (that is, the original photo that was scanned or the original graphic
as it appears on the monitor).
G Contrast
Adjust the contrast of the darkest and lightest portions relative to each
other, as desired. Increasing the Contrast makes images sharper, and
reducing the Contrast softens images.
H Saturation
Not available.
I Gray Tone
Not available.
J Object Adjustment
Select this option to display the Object Adjustment dialog box, in which
you can specify objects subject to color adjustment.
564 Software
Mac OS 9
Note
• For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P.214)
Object Adjustment dialog box
In the Object Adjustment dialog box, you can specify what type of print jobs to apply color adjustment to. If
an original comprises images, graphics, and text, you can specify which portion to apply color adjustment to.
Note
• To display the Object Adjustment dialog box, on the Color Adjustment pane, click Object Adjustment.
Setting Item
Description
A Image
Select this option to apply color adjustment to image areas, such as photos.
B Graphics
Select this option to apply color adjustment to graphics, such as lines and
circles.
C Text
Select this option to apply color adjustment to text.
Software 565
Mac OS 9
Media Detailed Settings Dialog Box (Mac OS 9)
The Media Detailed Settings dialog box offers the following settings. For details on settings items, refer to
the printer driver help.
Note
• To display the Media Detailed Settings dialog box, on the Main Pane (Mac OS 9) (→P.545) , click
Settings by Media Type.
Setting Item
Description
A Media Type
Select the paper type.
For information on the types of paper the printer supports, refer to the Paper
Reference Guide . (→P.107)
B Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Drying
Time setting is only valid for rolls.
(→P.135)
C Between Pages
Specify the time the printer waits after printing a page until ejecting the
paper, as needed.
D Between Scans
Specify the time the printer waits after printing a line on the page until
printing the next line, as needed.
E Roll Paper Margin for
Safety
F Near End Margin
You can specify the length of a margin on the leading edge of paper to
ensure that paper susceptible to curling is held rmly against the Platen .
Specify the length of the Near End Margin (the leading edge margin) of the
roll, as needed.
G Cut Speed
Select the speed of automatic cutting, as needed. Adjust this setting if paper
is not cut well when automatic cutting is used.
H Automatic Cutting
You can activate or deactivate Automatic Cutting and printing of cut lines,
as desired. In this list, you can specify Yes or No and Print Cut Guideline .
I Mirror
Specify whether to print a mirror image, as needed. Select this option to print
a version of the document or image with the left and right sides inverted.
566 Software
Mac OS 9
Special Settings Dialog Box (Mac OS 9)
If the printing results are not as you expected, you can change how printing is processed in the Special
Settings dialog box.
Note
• To display the Special Settings dialog box, on the Additional Settings Pane (Mac OS 9) (→P.552) ,
click Special Settings.
Setting Item
A Fast Graphic Process
Description
If image colors are inconsistent in printed documents or if lines are printed
in varying thicknesses, clearing this option may help produce the expected
results.
Software 567
Mac OS 9
View Settings Dialog Box for the Printing Application
(Mac OS 9)
In the View Settings dialog box, you can check details of the selected printing application.
Note
• To display the View Settings dialog box, on the Main Pane (Mac OS 9) (→P.545) , click View Settings
by Print Target.
Setting Item
Description
A Print Target
Shows all Print Target options (settings items for the printing application).
B Name
Identies the item selected in Print Target by its name and an icon.
C Details
Here, you can conrm detailed settings values for each item selected in
the Print Target list.
568 Software
Network Setting
Network Setting
Network Setting
Network Environment
System requirements
The system requirements, which vary depending on your network, are as follows.
• Printing over a TCP/IP network
• Compatible operating systems
• Windows 2000 (Professional or Server)
• Windows XP (Home Edition or Professional)
• Windows Server 2003 (Standard Edition)
• Windows Vista (Home Basic/Business/Ultimate)
• Mac OS 9.1 or later
• Mac OS X 10.2.8 or later
• Compatible computer
• A computer that runs one of the above operating systems
• Printing over an AppleTalk network
• Compatible operating systems
• Mac OS 9.1 or later
• Mac OS X 10.2.8 or later
• Compatible computer
• A computer that runs one of the above operating systems
Note
• The printer cannot be used over a LocalTalk network.
• Compatible with EtherTalk Phase 2.
• Printing over a NetWare network
• Compatible servers
• Novell NetWare 4.2/5.1/6.0
• Compatible clients
• Windows 2000 (Professional or Server)
• Windows XP (Professional)
• Compatible computer
• A computer that runs one of the above operating systems
Note
• In NetWare 6.0, iPrint is not supported.
Network Setting 569
Network Setting
Network environment
After conrming what type of network environment you will connect the printer to, set up the printer and
computers as needed.
• Example of a Windows network
In Windows networks, print over TCP/IP.
Note
• NetBIOS is not supported.
• Example of a Macintosh network
In Macintosh networks, print over AppleTalk (EtherTalk) or TCP/IP, using Bonjour(Zeroconf) functions.
• Example of a NetWare network
Note
• Even if there is a NetWare server in your network environment, you can use both TCP/IP and AppleTalk.
In this case, complete the settings for each protocol you will use.
570 Network Setting
Network Setting
Conguring the IP Address on the Printer
You must congure the printer’s IP address before using the printer on a TCP/IP network.
The printer’s IP address is congured automatically when you install the printer driver following the instructions
in the Quick Start Guide.
Follow the steps below to congure the IP address by using imagePROGRAF Device Setup Utility, the
printer Control Panel, or ARP or PING commands, if the IP address is changed, or if you change the printer
connection mode to a network connection. For details on conguring the IP address, refer to the following
topics.
• Conguring the IP Address Using imagePROGRAF Device Setup Utility (Windows) (→P.495)
• Conguring the IP Address Using the Printer Control Panel (→P.575)
• Conguring the IP Address Using ARP and PING Commands (→P.577)
Note
• We recommend conguring the printer’s IP address even if you will use the printer in other network
except for TCP/IP. Conguring the printer’s IP address enables you to use RemoteUI to congure the
network settings and manage the printer with a web browser.
For details on RemoteUI, see “Using RemoteUI”. (→P.580)
Network Setting 571
Network Setting
Initializing the Network Settings
Use RemoteUI to restore the network settings to the default values as follows.
Important
• Initializing the network settings will also restore the default value of the printer’s IP address. As a result,
the RemoteUI page cannot be displayed in the web browser after this procedure.
• For instructions on reconguring the IP address, see “Conguring the IP Address on the Printer”.
(→P.571)
• For details on RemoteUI, see “Using RemoteUI”. (→P.580)
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display
the RemoteUI page.
http://“printer IP address or name”/
Example: http://xxx.xxx.xxx.xxx/
2.
3.
4.
5.
6.
Select Administrator Mode and click Logon.
If a password has been set on the printer, enter the password.
Click Network in the Device Manager menu at left to display the Network page.
Click Reset to Default settings in the lower-right corner of the Network Interface group.
After conrming the message, click OK to restore the network settings to the default values.
Note
• You can also use imagePROGRAF Device Setup Utility or the Control Panel to restore the default
network settings.
572 Network Setting
Network Setting
Conguring the Printer’s TCP/IP Network Settings
Follow the steps below to congure the TCP/IP network settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display
the RemoteUI page.
http://“printer IP address or name”/
Example: http://xxx.xxx.xxx.xxx/
2.
3.
4.
5.
Select Administrator Mode and click Logon.
If a password has been set on the printer, enter the password.
Click Network in the Device Manager menu at left to display the Network page.
Click Edit in the upper-right corner of the TCP/IP group to display the Edit TCP/IP Protocol
Settings page.
6.
Refer to the TCP/IP Settings Items table to complete the settings.
TCP/IP Settings Items
Item
Default Setting
Details
Use DHCP
Activate this setting to use DHCP Off
for conguring the IP address.
Use BOOTP
Activate this setting to use
BOOTP for conguring the IP
address.
Use RARP
Activate this setting to use RARP Off
for conguring the IP address.
RAW Mode Bi-direction
Activate this setting to use
Raw mode bidirectional
communication.
Off
Enable DNS Dynamic Update
Activate this setting to perform
DNS server registration
automatically.
Off
Use Zeroconf Function
Activate this setting to use
Bonjour.
On
IP Address
Specify the printer’s IP address.
0.0.0.0
Subnet Mask
Specify the printer’s subnet mask. 0.0.0.0
Gateway Address
Specify the printer’s default
gateway.
0.0.0.0
LPD Printing
Activate this setting to use LDP
Printing.
On
IPP Printing
Activate this setting to use IPP
Printing.
On
IPP Printer URI
Specify the URI of the printer used printer
for IPP printing using up to 252
characters (1-252 characters).
When using a standard Windows
port for IPP printing, enter an
URL less than 255 bytes for
all characters for “http://<IP
address/IPP-URI.”
Off
Network Setting 573
Network Setting
Item
7.
Default Setting
Details
RAW Printing
Activate this setting to use Raw
Printing.
On
SMTP Server Address
Specify the SMTP server’s IP
address.
0.0.0.0
Primary DNS Server Address
Specify the IP address of the
primary DNS server.
0.0.0.0
Secondary DNS Server Address Specify the IP address of the
secondary DNS server.
0.0.0.0
DNS Host Name
Specify the printer host name,
up to 63 characters (1-63
characters). Use single-byte
letters, numbers, and “-”
(hyphens). Do not use numbers
or “-” for the rst character or “-”
for the last character.
NB-17FBxxxxxxxxxxxx
DNS Domain Name
Specify the printer domain
(Blank)
name, up to 63 characters. Use
single-byte letters, numbers, “-”
(hyphens), and “.” (periods). Do
not use numbers, “-”, or “.” for the
rst character, or “-” or “.” for the
last character.
Multicast DNS Service Name
Specify the printer’s Multicast
Canon iPFxxxx (xxxxxx)
DNS service name, up to 63
characters. (1-63 characters)
This name will be displayed when
Bonjour functions are used.
Click OK to display the Network page.
Note
• If you specify to congure the IP address using DHCP, BOOTP, or RARP, there must be a server that
supports such protocol running in the network.
• If you specify to congure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by this
method is used rst. If you cannot obtain the IP address, the address specied in IP Address is used.
• It takes a minute or two to determine whether DHCP, BOOTP, or RARP are available. We recommend
clearing check boxes of options you will not use.
• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS
servers, DNS host name, and DNS domain name in Primary DNS Server Address, Secondary DNS
Server Address, DNS Host Name, and DNS Domain Name, respectively.
574 Network Setting
Network Setting
Conguring the IP Address Using the Printer Control
Panel
This topic describes how to congure the printer’s IP address on the Control Panel.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Interface Setup, and then press ▼.
MAIN MENU
Interface Setup ↓
3.
Press ◄ or ► to select TCP/IP, and then press ▼.
Interface Setup
TCP/IP ↓
4.
Press ◄ or ► to select IP Setting, and then press ▼.
TCP/IP
IP Setting ↓
5.
Press ◄ or ► to select IP Address, and then press ▼.
IP Setting
IP Address ↓
6.
Press ◄ or ► to move the cursor (_) to each eld for entering IP address numbers.
IP Address
=0.0.0.0
7.
Press the OK button to prepare to enter the number.
Network Setting 575
Network Setting
8.
Press ◄ or ► to select the number, and then press the OK button.
IP Address
=xxx.0.0.0
Note
• Pressing the ◄ button decreases the number by 1. The minimum value is “0,” after which “255” is
displayed.
• Pressing the ► button increases the number by 1. The maximum value is “255,” after which “0” is
displayed.
• Hold down ◄ or ► to increase or decrease the value continuously.
9.
Repeat steps 6-8 to enter the IP address assigned to the printer.
IP Address
=xxx.xxx.xxx.xxx
10.
Press the Online button to bring the printer online.
If any of the settings are changed, a message for conrmation is displayed. In this case, press
the OK button.
Note
• If an error message is displayed, check the settings and correct any invalid values.
• To cancel the setup process, hold down the Stop/Eject button for a second or more.
Important
• Be sure to complete step 10. This will activate the values you have entered.
• You can also specify the subnet mask and default gateway on the Control Panel.
576 Network Setting
Network Setting
Conguring the IP Address Using ARP and PING
Commands
This topic describes how to congure the IP address using ARP and PING commands.
To use the ARP and PING commands, you will need to know the printer’s MAC address. You can conrm
the MAC address on the Control Panel.
1.
Check the printer’s Mac address.
You can conrm the MAC address on the Control Panel as follows:
1. Press the Menu button to display MAIN MENU.
2. Press ◄ or ► to select Information, and then press ▼.
3. Press ◄ or ► to select MAC Address, and then press the OK button.
You can also print information on the printer status, which includes the MAC address, as follows:
1. Press the Menu button to display MAIN MENU.
2. Press ◄ or ► to select Test Print, and then press ▼.
3. Press ◄ or ► to select Status Print, and then press the OK button.
Note
• If you have selected 20mm in Nr End Sht Mrgn in the printer menu, the Status Print sheet may
not be printed completely.
(→P.47)
The MAC address is indicated in the printer status information in the following location.
2.
3.
In Windows, open a command prompt or MS-DOS prompt, or in Mac OS X, start Terminal.
Execute the following command to add entries to the ARP table for managing IP addresses
and corresponding Mac addresses.
arp -s [IP address] [the printer’s Mac address you have veried]
Example: arp -s xxx.xxx.xxx.xxx 00-00-85-xx-xx-xx
Note
• In Mac OS X when using Terminal, enter the arp command in the format “arp -s xxx.xxx.xxx.xxx
00:00:85:xx:xx:xx.” For details, refer to the help le for the command line.
Network Setting 577
Network Setting
4.
Execute the following command to send the IP address to the printer and congure it.
ping [IP address as specied in the ARP command] -l 479
Example: ping xxx.xxx.xxx.xxx -l 479
Note
• In “-l,” the “l” is the letter “l”.
• In Mac OS X when using Terminal, enter the ping command in the format “ping -s 479
xxx.xxx.xxx.xxx.” For details, refer to the help le for the command line.
Note
• The subnet mask and default gateway will be set to “0.0.0.0.”Use RemoteUI to change the subnet mask
and default gateway to match your network settings.
For details on RemoteUI, see “Using RemoteUI”. (→P.580)
578 Network Setting
Network Setting
Specifying Printer-Related Information
Follow the steps below to specify device information and security settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display
the RemoteUI page.
http://“printer IP address or name”/
Example: http://xxx.xxx.xxx.xxx/
2.
3.
4.
5.
Select Administrator Mode and click Logon.
If a password has been set on the printer, enter the password.
Click Information in the Device Manager menu at left to display the Information page.
To display the relevant settings page, click Edit in the upper-right corner of Device Information
or Security, depending on what information you want to specify.
6.
Refer to the tables of settings items for device information and security settings to complete
the settings.
Device information settings items
Item
Details
Default Setting
Device Name
Specify the device name.
(0-32 characters)
(Blank)
Location
Specify where the device is installed.
(0-32 characters)
(Blank)
Administrator
Identify the administrator.
(0-32 characters)
(Blank)
Phone
Specify the device administrator’s contact
information.
(0-32 characters)
(Blank)
Comments(E-mail)
Enter any notes from the device administrator.
(0-32 characters)
(Blank)
Security settings items
Item
Details
Default Setting
Old Password
Enter the current device password.
(0-15 characters)
(Blank)
New Password
Enter a new password.
(0-15 characters)
(Blank)
Conrm
Enter the new password again to conrm it.
(0-15 characters)
(Blank)
Besides entering a password, you can specify other security-related information, such as use of SNMP
or IPP authentication, or an IP address to restrict printing via TCP/IP.
7.
Click OK to activate the settings.
Network Setting 579
Network Setting
Using RemoteUI
Enter the printer’s IP address in a web browser to display the RemoteUI page. After you log on to RemoteUI
from the page, you can check and change the status of the printer and print jobs, and congure network
settings.
For details on conguring printer settings for networks, refer to the following topics.
•
•
•
•
Conguring the Printer’s TCP/IP Network Settings (→P.573)
Conguring the Printer’s AppleTalk Network Settings (→P.598)
Conguring the Printer’s NetWare Network Settings (→P.582)
Specifying Printer-Related Information (→P.579)
Note
• RemoteUI also offers many other features. You can display the ink levels, check error messages and
other status information, and cancel print jobs.
• By factory default, the English screen is displayed. You can change the display language after logging
on by choosing the desired language in the Language list.
Important
• Use Netscape Navigator/Communicator 6.0 or later, Internet Explorer 5.01 or later, or Firefox 1.5 or later
as a web browser. In Mac OS X, you can also use Safari 1.32 or later or Safari 2.03 or later.
• Access is not possible via a proxy server. In environments where a proxy server is used, add the
printer’s IP address to Exceptions (addresses accessed without a proxy server) in the web browser
proxy server settings. (Settings may vary depending on the network environment.)
• Enable JavaScript and cookies in the web browser.
• If you access RemoteUI with the printer name instead of its IP address, make sure the DNS settings are
correctly congured.
580 Network Setting
Network Setting
Email Notication When Printing is Finished or Errors
Occur
The printer can notify you of the printer status by email. Even when you are away from the printer, you can
know when printing is nished or if errors occur. Receive notication via email on your mobile phone or
at your computer.
Use the imagePROGRAF Status Monitor (Windows) function to set up email recipients and message timing.
Besides being informed of nished print jobs or errors, you can also complete settings for email notication
when service is needed or it’s time to replace consumables.
Note
• For details on email notication using imagePROGRAF Status Monitor (in Windows), refer to the
imagePROGRAF Status Monitor help.
Network Setting 581
Network Setting (Windows)
Network Setting (Windows)
Conguring the Printer’s NetWare Network Settings
Follow the steps below to congure the NetWare network settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display
the RemoteUI page.
http://“printer IP address or name”/
Example: http://xxx.xxx.xxx.xxx/
2.
3.
4.
5.
Select Administrator Mode and click Logon.
If a password has been set on the printer, enter the password.
Click Network in the Device Manager menu at left to display the Network page.
Click Edit in the upper-right corner of the NetWare group to display the Edit NetWare Protocol
Settings page.
6.
Refer to the NetWare Settings Items table to complete the settings.
NetWare Settings Items
Item
Default Setting
Details
Frame Type
Specify the type of frame to
use in NetWare.
NCP Burst Mode
Activate this setting to use
On
NCP Burst Mode.
This mode supports fast data
transfer when printing in queue
server mode. Normally, leave
the setting On.
Print Application
Choose the print service.
• Bindery PServer
• RPrinter
• NDS PServer
• NPrinter
Packet Signature
Select If Requested by Server If Requested by Server
to use packet signature.
Bindery
PServer
File Server Name
Specify the name of a le
server that has a NetWare print
server, up to 47 characters.
Print Server Name
Specify the name of a
NetWare print server, up
to 47 characters.
-
Print Server Password
Set a password for the print
server, up to 20 characters.
-
Polling Interval
Specify the interval to conrm
jobs.
(1-15 seconds)
5
582 Network Setting
Disabled
NDS PServer
Network Setting (Windows)
Item
RPrinter
NDS
PServer
NPrinter
7.
Default Setting
Details
Print Server Name
Specify the name of a
NetWare print server, up
to 47 characters.
-
Printer Number
Specify the number of the
printer connected to the
NetWare print server.
(0-5)
0
Tree Name
Specify the name of an NDS
tree that has a NetWare print
server, up to 32 characters.
-
Context Name
Specify the name of a context
that has a NetWare print
server, up to 255 characters.
-
Print Server Name
Specify the name of a
NetWare print server, up
to 64 characters.
-
Print Server Password
Set a password for the print
server, up to 20 characters.
-
Polling Interval
Specify the interval to conrm
jobs.
(1-255 seconds)
5
Print Server Name
Specify the name of a
NetWare print server, up
to 47 characters.
Enter the advertising name
of the print server designated
by the NetWare print service.
Usually, the advertising name
is the same as the name of the
print server.
Printer Number
Specify the number of the
printer connected to the
NetWare print server.
(0-254)
Enter the printer number
designated by the NetWare
print service.
0
Click OK to display the Network page.
Network Setting 583
Network Setting (Windows)
Specifying the Printer’s Frame Type
To enable communication between the printer and computers on your network, specify the Ethernet frame
type in your NetWare environment.
Follow the steps below to specify the frame type by using imagePROGRAF Device Setup Utility or the
printer Control Panel.
Note
• You can specify the frame type by using RemoteUI if the printer’s IP address is congured.
Important
• Before specifying the frame type, make sure the printer is on and connected to the network.
• For instructions on installing imagePROGRAF Device Setup Utility, see “Installing imagePROGRAF
Device Setup Utility”. (→P.494)
Specifying the Frame Type Using imagePROGRAF Device Setup
Utility
1.
2.
3.
4.
5.
6.
Start imagePROGRAF Device Setup Utility.
In the list of printers, select the printer to congure.
Choose Protocol Settings from the Printer menu.
In the NetWare Frame Type list, select the frame type.
Click ETHERNET II under Frame Type in TCP/IP.
In IP Address, enter the IP address assigned to the printer, and then enter the subnet mask in
Subnet Mask and the default gateway in Gateway Address.
Important
• You must specify the IP address here to be able to congure NetWare protocol settings using
RemoteUI.
7.
8.
9.
Click Set.
Click OK after the Conrmation message dialog box is displayed.
Exit imagePROGRAF Device Setup Utility.
584 Network Setting
Network Setting (Windows)
Specifying the Frame Type Using the Printer Control Panel
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Interface Setup, and then press ▼.
MAIN MENU
Interface Setup ↓
3.
Press ◄ or ► to select NetWare, and then press ▼.
Interface Setup
NetWare ↓
4.
Press ◄ or ► to select NetWare, and then press ▼.
NetWare
NetWare ↓
5.
Press ◄ or ► to select On and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
NetWare
= On
Return to the NetWare menu.
6.
Press ◄ or ► to select Frame Type, and then press ▼.
NetWare
Frame Type ↓
7.
Press ◄ or ► to select your frame type, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Frame Type
= Ethernet 802.3
Return to the NetWare menu.
8.
Press ◄ or ► to select Print Service, and then press ▼.
NetWare
Print Service ↓
9.
Press ◄ or ► to select your print service, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Print Service
= RPrinter
Return to the NetWare menu.
Network Setting 585
Network Setting (Windows)
10.
Press the Online button to bring the printer online.
If any of the settings is changed, a message for conrmation is displayed. In this case, press
the OK button.
Note
• If an error message is displayed, check the settings and correct any invalid values.
• To cancel the setup process, hold down the Stop/Eject button for a second or more.
Important
• Be sure to complete step 10. This will activate the values you have entered.
586 Network Setting
Network Setting (Windows)
Specifying NetWare Print Services
Before printing in a NetWare network, you must congure print services such as print servers, print queues,
and so on. You can congure the print service settings from a computer using any of the following software.
• NWADMIN
• PCONSOLE
(from Novell, provided with NetWare)
Important
• If you use NWADMIN to congure the print service settings, Novell Client (the Novell NetWare client
software) must be installed as the client software application.
• NetWare networking is unsupported in Windows Vista.
This topic gives instructions for conguring NetWare print services. The order of this procedure may vary
depending on the environment.
Choosing the type of print services
Before completing print service settings, choose the type of print service. Refer to the following descriptions
as needed.
Note
• In NetWare 5.1/6.0/6.5, NDPS may also be used as the print service. If you use NDPS, use the
Novell printer gateway included with NetWare. For details on conguring NDPS, refer to the NetWare
documentation.
• NDS (Novell Directory Service) and Bindery
NDS and bindery are both supported. Use the mode that is compatible with your network environment.
• Queue Server Mode and Remote Printer Mode
Queue server mode and remote printer mode are both supported.
• Queue Server Mode
When using queue server mode, all print server functions are supported, so there is no need for
other print server software or hardware. In NDS queue server mode (NDS PServer), the NDS
print server is used for printing. In bindery queue server mode (Bindery PServer), the bindery print
server is used for printing. Note that if you use queue server mode, a NetWare user license is
required for each network interface.
• Remote Printer Mode
In remote printer mode, the printer is controlled by the NetWare print server. Thus, a NetWare
print server is required. In NDS remote printer mode (NPrinter), the NDS print server is used for
printing, and in bindery remote printer mode (RPrinter), the bindery print server is used for printing.
Network Setting 587
Network Setting (Windows)
Using NWADMIN or PCONSOLE to set up the print server
Use NWADMIN to set up the print server if NDS queue server mode or remote printer mode is used.
1.
2.
Log into NetWare as Administrator or with equivalent rights, and then start NWADMIN.
Run Quick Setup.
1. Choose Print Services Quick Setup in the Tools menu.
2. Enter a desired name in Print Server Name. To use an existing print server, click the button at right
and choose the name from the list.
3. Enter a desired printer name in Name.
4. To use the printer in queue server mode, choose Other/Unknown in Type. To use the printer in
remote printer mode, choose Parallel in Type, click Communications, and set Ports to LPT1 and
Connection Type to Manual Load.
5. Enter a desired queue name in Name.
6. In Volume, enter the volume object (that is, the object representing the physical volume on the
network) where the print queue will be created. Click the button at right to choose from a list.
7. Complete other settings as needed and click OK.
Note
• The print server name will be required when conguring the printer’s network settings. Note the
print server name for future reference.
• When running Quick Setup, the printer is assigned printer number “0.” When using the printer in
queue server mode, do not change the printer number from “0.”
3.
Set a password.
1. Right-click the print server created in step 2 and choose Details.
2. Click Change Password to open the password input dialog box. Enter the password.
3. Click OK to close the password input dialog box.
4. Click OK or Cancel to close the details dialog box.
4.
To use the printer in remote printer mode, start the print server.
To use the NetWare le server as the print server, enter “LOAD PSERVER.NLM” at the le
server and press the Enter key.
Note
• This procedure is not required when using queue server mode.
588 Network Setting
Network Setting (Windows)
Use PCONSOLE to set up the print server if bindery queue server mode or remote printer mode is used.
1.
2.
3.
Log into NetWare as Supervisor and start PCONSOLE.
Switch to bindery mode.
If the print server has not been created, create it.
1. In Available Options, select Quick Setup and press the Enter key.
2. Enter the name of the new print server, the new printer, and the queue.
Note
• The print server name will be required when conguring the printer’s protocol settings. Note down
the print server name for future reference.
4.
Specify the printer type.
1. To use the printer in queue server mode, choose Other/Unknown in Type. To use remote printer
mode, set Printer Type to Parallel and Position to Manual Load.
2. Press the Esc key.
3. After the conrmation message is displayed, choose Yes and press the Enter key.
5.
Set a password.
1. In Available Options, select Print Servers and press the Enter key.
2. Select the print server created in step 2 and press the Enter key.
3. Select Password, and press the Enter key to display the password input dialog box.
4. Enter the password and press the Enter key.
6.
Press the Esc key several times to display the dialog box for conrming that PCONSOLE
is nished.
7.
Click Yes to exit PCONSOLE.
Network Setting 589
Network Setting (Windows)
Specifying NetWare Protocols
Follow the steps below to congure NetWare protocol settings other than the frame type by using RemoteUI.
Note
• For details on RemoteUI, see “Using RemoteUI”. (→P.580)
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display
the RemoteUI page.
http://“printer IP address or name”/
Example: http://xxx.xxx.xxx.xxx/
2.
3.
4.
5.
Select Administrator Mode and click Logon.
If a password has been set on the printer, enter the password.
Click Network in the Device Manager menu at left to display the Network page.
Click Edit in the upper-right corner of the NetWare group to display the Edit NetWare Protocol
Settings page.
6.
7.
Make sure the Frame Type indicates the frame type used on the NetWare network.
To use burst mode, choose On for NCP Burst Mode.
Note
• Burst mode supports fast data transfer when printing in queue server mode. Normally, choose On.
8.
In Print Application, click the print service to be used.
Note
• Only one print service selected here will be enabled. Multiple print services are not available at
the same time.
9.
10.
For packet signature, click If Requested by Server in Packet Signature.
Complete the following settings based on the selected service.
• If you have selected Bindery PServer: Queue Server Mode (Using a Bindery Print Server)
1. In File Server Name, enter the le server name.
2. In Print Server Name, enter the name of the print server created in Specifying NetWare
Print Services. (→P.587)
3. In Print Server Password, enter the password of the print server created in Specifying
NetWare Print Services. (→P.587)
4. In Polling Interval, specify the interval at which the printer checks the NetWare print queue.
• If you have selected RPrinter: Remote Printer Mode (Using a Bindery Print Server)
1. In Print Server Name, enter the advertising name of the print server created in Specifying
NetWare Print Services. (→P.587)
2. In Printer Number, enter the same printer number specied in Specifying NetWare Print
Services. (→P.587)
590 Network Setting
Network Setting (Windows)
• If you have selected NDS PServer: Queue Server Mode (Using an NDS Print Server)
1. In Tree Name and Context Name, enter the tree and context name of the print server. Do not
exceed 255 characters for the context name.
2. In Print Server Name, enter the name of the print server created in Specifying NetWare
Print Services. (→P.587)
3. In Print Server Password, enter the password of the print server created in Specifying
NetWare Print Services. (→P.587)
4. In Polling Interval, specify the interval at which the printer checks the NetWare print queue.
• If you have selected NPrinter: Remote Printer Mode (Using a NDS Print Server)
1. In Print Server Name, enter the advertising name of the print server created in Specifying
NetWare Print Services. (→P.587) Usually, the advertising name is the same as the name of
the print server.
2. In Printer Number, enter the same printer number specied in Specifying NetWare Print
Services. (→P.587)
11.
12.
Click OK to display the Network page.
Click Reset to activate the settings.
For a list of NetWare protocol settings items, see “Conguring the Printer’s NetWare Network Settings”.
(→P.582)
Note
• If you use RemoteUI to display the print log in RPrinter or NPrinter mode, the document and user
information cannot be obtained. Thus, Document Name only indicates Unknown, and the User Name
information is identied as RPRINTER/NPRINTER.
Network Setting 591
Network Setting (Windows)
Conguring NetWare Network Settings
To print over a NetWare network, congure the network environment as follows.
Important
• To congure network settings, you must be logged in with administrative rights such as “Administrator”
account. We recommend that your network administrator congure the network settings.
1.
Specify the Ethernet frame type for communication between the printer and computers.
For instructions, see “Specifying the Printer’s Frame Type”. (→P.584)
2.
Specify the NetWare print services, including the print server and queue.
For instructions, see “Specifying NetWare Print Services”. (→P.587)
3.
Specify NetWare protocol details besides the frame type.
For instructions, see “Specifying NetWare Protocols”. (→P.590)
After you have completed the steps above, congure each computer for printing over the
NetWare network.
4.
Connect to the NetWare network.
Install NetWare client software on each computer to be used for printing over the network, and
log in to the NetWare server or tree. For instructions on connection, refer to the NetWare and
operating system documentation.
5.
Install the printer driver.
Follow the instructions of your network administrator to install the printer driver on each computer
to be used for printing. When installing the printer driver, choose Network Printer as the printer
destination, and then choose the print queue created from the NetWare print service settings.
6.
Follow these steps to congure the printer port.
1. Open the Printers and Faxes (or Printers ) window.
2. Right-click the printer icon and choose Properties.
3. Click the Port (or Advanced ) tab to display the Port (or Advanced ) sheet.
4. As the destination port, specify the print queue created by conguring the NetWare print service
settings.
Note
• This step is not necessary if you specied the printer destination during installation of the printer
driver.
592 Network Setting
Network Setting (Windows)
Conguring the Printer Driver Destination (Windows)
This topic describes how to specify the printer driver destination if the printer’s IP address is changed, or if you
will use the printer over a network connection instead of via USB connection.
Important
• If you use the printer on a TCP/IP network, make sure the printer’s IP address is congured correctly.
• Conguring the IP Address on the Printer (→P.571)
1.
2.
3.
4.
5.
6.
Open the Printers and Faxes (or Printers ) window.
Right-click the icon of this printer and choose Properties to open the printer properties window.
Click the Port tab to display the Port sheet.
Click Add Port to display the Printer Ports dialog box.
In the Available Port list, select Standard TCP/IP Port.
Click New Port.
After the wizard starts, a window is displayed for the Welcome to the Add Standard TCP/IP
Printer Port Wizard.
7.
8.
9.
10.
11.
12.
Click Next.
In Printer Name or IP Address, enter the printer’s IP address.
Follow the instructions on the screen to add a printer port.
Click Close to close the Printer Ports dialog box.
Make sure the printer port you added is displayed under Ports, and that the port is selected.
Click OK to close the printer properties window.
Note
• The procedure described above is the conguration based on the LPR or RAW protocol using the
standard TCP/IP port in Windows ( Standard TCP/IP Port ).
Network Setting 593
Network Setting (Windows)
Sharing the Printer in Windows
If you set up a computer as a print server in Windows 2000, Windows XP, or Windows Server 2003, the
computer can receive print jobs sent from other computers (clients) connected to it for printing. This topic
describes how to share the printer in Windows.
Important
• We recommend that your network administrator congure your network for printer sharing.
1.
Open the Printers and Faxes (or Printers ) window.
2.
Right-click the icon of this printer and choose Sharing to open the printer properties window.
594 Network Setting
Network Setting (Windows)
3.
On the Sharing sheet, click Share this printer and enter the shared name.
4.
To print jobs from clients running other versions of Windows, click Additional Drivers and follow
the instructions to install the printer driver of the corresponding version.
If you are prompted to choose the location of the printer driver le, insert the provided User
Software CD-ROM in the CD-ROM drive and specify the folder where the printer driver is located.
5.
Click OK.
Important
• When installing the printer driver on client computers, select "Network Printer" on the connection type
screen in the printer wizard, and then select the printer shared from the computer set up as the print
server.
Network Setting 595
Network Setting (Windows)
Installing imagePROGRAF Device Setup Utility
Install imagePROGRAF Device Setup Utility from the User Software CD-ROM provided with the printer
as follows:
Important
• In Windows 2000/Windows XP/Windows Server 2003/Windows Vista, you must log on with
administrative rights equivalent to the “Administrator” account.
1.
2.
3.
4.
Insert the User Software CD-ROM in the CD-ROM drive.
On the Setup Menu window, click Install Individual Software.
Click Install in imagePROGRAF Device Setup Utility.
Follow the instructions on the screen to proceed with the installation.
596 Network Setting
Network Setting (Windows)
Conguring the IP Address Using imagePROGRAF
Device Setup Utility
From a computer running Windows, you can use imagePROGRAF Device Setup Utility provided with the
printer to congure the printer’s IP address. This topic describes how to congure the IP address using
imagePROGRAF Device Setup Utility.
Important
• To congure network settings, you must be logged in with administrative rights such as “Administrator”
account. We recommend that your network administrator congure the network settings.
• For instructions on installing imagePROGRAF Device Setup Utility, see “Installing imagePROGRAF
Device Setup Utility”. (→P.494)
1.
2.
3.
4.
5.
6.
7.
Start imagePROGRAF Device Setup Utility from the start menu.
In the list of printers, select the printer to congure.
Choose Protocol Settings from the Printer menu.
In the Setting IP Address list, choose Manual.
Enter the IP address assigned to the printer and click the Set button.
Click OK after the Conrmation message dialog box is displayed.
Exit imagePROGRAF Device Setup Utility.
Note
• To congure the IP address automatically, choose Auto in the Setting IP Address list and select
DHCP, BOOTP, or RARP.
• You can also specify the subnet mask and default gateway.
Network Setting 597
Network Setting (Macintosh)
Network Setting (Macintosh)
Conguring the Printer’s AppleTalk Network Settings
Follow the steps below to congure the AppleTalk network settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display
the RemoteUI page.
http://“printer IP address or name”/
Example: http://xxx.xxx.xxx.xxx/
2.
3.
4.
5.
Select Administrator Mode and click Logon.
If a password has been set on the printer, enter the password.
Click Network in the Device Manager menu at left to display the Network page.
Click Edit in the upper-right corner of the AppleTalk group to display the Edit AppleTalk
Protocol Settings page.
6.
Refer to the AppleTalk Settings Items table to complete the settings.
AppleTalk Settings Items
Item
Details
Default Setting
Phase Type
Specify whether to use AppleTalk. Disabled
If you will use AppleTalk, choose
Phase 2.
If you will not use AppleTalk,
choose Disabled .
Name (*1)
Specify the object name used by Canon NB-17FB (xxxxxx)
AppleTalk (in up to 31 single-byte
or 15 double-byte characters).
However, do not use the following
single-byte characters: @ * : =
Zone (*2)
Specify the printer zone name, up *
to 31 single-byte characters.
However, do not use the following
single-byte characters: @ : = Also
avoid using “*” (which represents
the default zone) in the middle of
a string.
*1:The object name you have specied in Name is displayed in Chooser in Mac OS 9 or Printer Setup
Utility (or Print Center ) in Mac OS X. If you use multiple printers in the same zone, assign a
unique name to each printer. By default, the network interface name is “Canon NB-17FB (xxxxxx).”
(Here, xxxxxx is the last six digits of the printer’s Mac address.)
*2: If zones have been created on the network, enter the name of the printer’s zone. If there are
no zones, leave the asterisk “*” entry (for the default zone) as it is. If you enter a network zone
name that does not match created zones, the printer will not be detected by Macintosh computers.
Consult your network administrator for information on zone names.
7.
Click OK to display the Network page.
598 Network Setting
Network Setting (Macintosh)
Conguring the Printer Driver Destination (Macintosh)
Specify the printer driver destination as follows if the printer’s IP address is changed, or if you will use the
printer over a network connection instead of via USB connection.
• If you switch to printing in an AppleTalk network, see “Conguring the Destination for AppleTalk Network
(Macintosh)”. (→P.600)
• If you switch to printing in a TCP/IP network, or if the printer’s IP address is changed, see “Conguring
the Destination for TCP/IP Network (Macintosh)”. (→P.604)
• If you switch to printing in a Bonjour network, see “Conguring the Destination for Bonjour Network
(Macintosh)”. (→P.608)
Network Setting 599
Network Setting (Macintosh)
Conguring the Destination for AppleTalk Network
(Macintosh)
To print over an AppleTalk network, activate the AppleTalk protocol and congure the destination as follows.
Activating AppleTalk on the printer
Important
• By factory default, the AppleTalk protocol is disabled on the printer.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Interface Setup, and then press ▼.
MAIN MENU
Interface Setup ↓
3.
Press ◄ or ► to select AppleTalk, and then press ▼.
Interface Setup
AppleTalk ↓
4.
Press ◄ or ► to select On and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
AppleTalk
= On
5.
Press the Online button to bring the printer online.
If any of the settings is changed, a message for conrmation is displayed. In this case, press
the OK button.
Note
• By using RemoteUI, you can also specify the object name used by AppleTalk, as well as the printer
zone name.
For details on RemoteUI, see “Using RemoteUI”. (→P.580)
Important
• Be sure to complete step 5. This will activate the values you have entered.
600 Network Setting
Network Setting (Macintosh)
Conguring the Destination (Mac OS 9)
1.
2.
Choose Chooser from the Apple menu to display the Chooser window.
3.
4.
5.
Close the Chooser window.
6.
7.
8.
9.
Close the AppleTalk window and save the settings.
10.
In AppleTalk, click Active.
Click AppleTalk under Control Panels to display the AppleTalk window.
In Connect via, choose Built-in Ethernet.
Choose Chooser from the Apple menu to display the Chooser window.
In the list at left, click GARO Printer Driver.
In the Destination list at right, select AppleTalk, and then select the printer in the list below.
Close the Chooser window and click OK after the conrmation message is displayed.
Network Setting 601
Network Setting (Macintosh)
Conguring the Destination (Mac OS X)
Note
• The following procedures are based on Mac OS X 10.4. The method of conguring the destination
varies depending on the version of Mac OS X.
1.
2.
In System Preferences, click Network to display the Network window.
In Show, choose Built-in Ethernet. Next, click AppleTalk, select Make AppleTalk Active,
and click Apply now.
3.
4.
5.
6.
Close the Network window and save the settings.
Choose Utilities (or Applications ) in the Go menu of Finder.
Click Printer Setup Utility (or Print Center ) in the Utilities folder.
If the printer name is not displayed in Printer List, click Add.
602 Network Setting
Network Setting (Macintosh)
7.
Select the printer in the Printer Browser list and click Add.
Network Setting 603
Network Setting (Macintosh)
Conguring the Destination for TCP/IP Network
(Macintosh)
Follow the steps below to congure the destination if you use the printer on TCP/IP network.
Important
• If you use the printer on TCP/IP network, make sure the printer’s IP address is congured correctly.
• Conguring the IP Address Using the Printer Control Panel (→P.575)
Conguring the Destination (Mac OS 9)
1.
2.
Choose Chooser from the Apple menu to display the Chooser window.
3.
Click Registering IP Address in the Destination list to display the IP Address Register/Edit
In the list at left, click GARO Printer Driver.
dialog box.
604 Network Setting
Network Setting (Macintosh)
4.
Enter the printer’s IP address in IP Address and click Add.
5.
Click OK to close the IP Address Register/Edit dialog box.
6.
In the Destination list, click the address you registered.
7.
Close the Chooser window and click OK after the conrmation message is displayed.
Network Setting 605
Network Setting (Macintosh)
Conguring the Destination (Mac OS X)
Note
• The following procedures are based on Mac OS X 10.4. The method of conguring the destination
varies depending on the version of Mac OS X. If you use other versions, refer to the help for the Printer
Setup Utility (or the Print Center ).
1.
2.
3.
Choose Utilities (or Applications ) in the Go menu of Finder.
4.
Click More Printers.
Click Printer Setup Utility (or Print Center ) in the Utilities folder.
Click Add to display the Printer Browser window.
606 Network Setting
Network Setting (Macintosh)
5.
In the list of connection methods, click Canon IP(iPF).
6.
Enter the printer’s IP address in Printer’s Address and click Add.
7.
Make sure the printer has been added, and then close the Printer List window.
Network Setting 607
Network Setting (Macintosh)
Conguring the Destination for Bonjour Network
(Macintosh)
In Mac OS X 10.2.8 and later, use Bonjour functions to easily connect the printer to the network. Follow the
steps below to congure the destination if you use the printer on TCP/IP network.
Note
• In Mac OS 9, if the computer’s TCP/IP settings have been congured, you can connect the printer to the
network as easily as with the Bonjour function.
Select IP Print (Auto) from the Destination list in Chooser to specify the destination.
Important
• Bonjour and IP Print (Auto) do not support printing to a printer on other network groups that require a
router for connection. Make sure the computer and printer are on the same network. For information
about network settings, ask your network administrator.
• By default, Bonjour is activated on the printer. The printer name as displayed in Chooser in Mac
OS 9 or Printer Setup Utility (or Print Center ) in Mac OS X is predened as the Multicast DNS
Service Name. You can activate or deactivate the Bonjour function or change the printer name by using
RemoteUI. For instructions on changing it, see “Using RemoteUI”. (→P.580)
1.
2.
3.
Choose Utilities (or Applications ) in the Go menu of Finder.
Click Printer Setup Utility (or Print Center ) in the Utilities folder.
If the printer name is not displayed in Printer List, click Add.
608 Network Setting
Network Setting (Macintosh)
4.
Select the printer from the list in the Printer Browser window and click Add.
Network Setting 609
Adjusting the Printhead
Maintenance
Adjusting the Printhead
Correcting Print Misalignment
If printed vertical lines are warped or colors are out of alignment, adjust the Printhead alignment. Adjust the
Printhead alignment automatically or manually by using a printed test pattern.
For instructions on automatic adjustment, see “Adjusting the Printhead Alignment Automatically”. (→P.610)
For instructions on manual adjustment, see “Adjusting the Printhead Alignment Manually”. (→P.612)
Adjusting the Printhead Alignment Automatically
If printed vertical lines are warped or colors are out of alignment, adjust the Printhead alignment. Adjust the
Printhead alignment automatically or manually by printing and reading a test pattern.
There are two modes for automatic adjustment: Standard Adj. and Advanced Adj. Standard Adj. will x
most slight image distortion or color misalignment, but if not, try Advanced Adj.
If using special media or printing does not improve even after performing automatic adjustment using
advanced adjustment, try manual adjustment. For instructions on manual adjustment, see “Adjusting the
Printhead Alignment Manually”. (→P.612)
Follow these steps for standard automatic adjustment of the Printhead.
1.
When using sheets, have two unused sheets A4/Letter-sized or larger ready when Standard
Adj. is selected or 8 when Advanced Adj. is selected.
When using a roll, load a roll 10 inches (254 mm) or wider.
• Loading Sheets in the Cassette (→P.156)
• Loading Sheets Manually (→P.159)
• Loading Rolls on the Roll Paper Holder (→P.115)
• Loading Rolls in the Roll Feed Unit (→P.118)
Note
• Use Standard Adj. if you have switched to another type of paper or if you want the boundaries
between colors to appear as attractive as possible.
• Use Advanced Adj. to ne-tune the space between nozzles or colors if you have switched the
printhead or if you want printed documents to appear as vivid as possible. We recommend using
Advanced Adj. for printing at a higher level of image quality.
• Always make sure the loaded paper matches the media type setting on the printer. Adjustment
cannot be completed correctly unless the setting value matches the loaded paper.
• We recommend using the type of paper you use most often for adjustment.
• This function is not available with CAD Tracing Paper, CAD Translucent Matte Film, or CAD Clear
Film. If adjustment is not possible as expected using highly transparent lm or similar media, try
another type of media or adjust the Printhead alignment manually. (→P.612)
610 Maintenance
Adjusting the Printhead
2.
Press the Menu button to display MAIN MENU.
3.
Press ◄ or ► to select Adjust Printer, and then press ▼.
MAIN MENU
Adjust Printer ↓
4.
Press the ◄ or ► button to select Auto Head Adj., and then press ▼.
Adjust Printer
Auto Head Adj. ↓
5.
Press ◄ or ► to select Advanced Adj., and then press ▼.
Auto Head Adj.
Advanced Adj. ↓
6.
Press ◄ or ► to select Yes, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Advanced Adj.
= Yes
A test pattern is printed for printhead adjustment.
After reading the pattern, the printer automatically adjusts the Printhead alignment.
Note
• If paper is fed automatically and no roll is loaded, select the media source and click the OK button.
Maintenance 611
Adjusting the Printhead
Adjusting the Printhead Alignment Manually
If printed vertical lines are warped or colors are out of alignment, adjust the Printhead alignment. Adjust the
Printhead alignment automatically or manually by using a printed test pattern.
You can adjust the Printhead alignment automatically or manually. Normally, choose automatic adjustment. If
using special media or printing does not improve even after performing automatic adjustment using advanced
adjustment, try manual adjustment. For instructions on automatic adjustment, see “Adjusting the Printhead
Alignment Automatically”. (→P.610)
Follow these steps for standard manual adjustment of the Printhead.
Note
• If Manual Head Adj is not displayed in the menu, choose Advanced Adj. in Auto Head Adj. Manual
Head Adj is displayed after you try Auto Head Adj. once.
1.
When using sheets, have an unused sheet A4/Letter-sized or larger ready.
When using a roll, load a roll 10 inches (254 mm) or wider.
• Loading Sheets Manually (→P.159)
• Loading Rolls on the Roll Paper Holder (→P.115)
• Loading Rolls in the Roll Feed Unit (→P.118)
Note
• Always make sure the loaded paper matches the media type setting. Adjustment cannot be
completed correctly unless the setting value matches the loaded paper.
• We recommend using the type of paper you use most often for feed amount adjustment.
2.
Press the Menu button to display MAIN MENU.
3.
Press ◄ or ► to select Adjust Printer, and then press ▼.
MAIN MENU
Adjust Printer ↓
4.
Press ◄ or ► to select Manual Head Adj, and then press ▼.
Adjust Printer
Manual Head Adj ↓
612 Maintenance
Adjusting the Printhead
5.
Press ◄ or ► to select Yes, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Manual Head Adj
= Yes
A test pattern is printed for printhead adjustment.
6.
After Adj.Setting is displayed, press ▼.
Adj.Setting
D↓
7.
Press ▼.
D
D-1
8.
Examine test pattern D-1 for printhead adjustment. After you determine the pattern with straight
lines, press ◄ or ► to choose the pattern number, and then press the OK button.
D-1
=10 ↓
Note
• If you cannot determine the pattern with straight lines, choose an intermediate value. For example,
choose 11 if you cannot decide whether pattern 10 or 12 is better.
9.
10.
11.
Repeat steps 7 and 8 to specify the adjustment value for D-2 to D-5 and D-7 to D-11.
Press ▲.
Press ◄ or ► to select Save Settings, and then press ▼.
Adj.Setting
Save Settings ↓
12.
Press ◄ or ► to select Yes, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Save Settings
= Yes
The printer now goes online.
Maintenance 613
Adjusting the Printhead
Adjusting the Printhead Height
If paper rubs against the printer or the edge is wrinkled from rubbing, adjusting the Printhead height may
improve results.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Med.Detail Set., and then press ▼.
MAIN MENU
Med.Detail Set. ↓
3.
Press ◄ or ► to select the type of paper, and then press ▼.
Med.Detail Set.
Plain Paper ↓
4.
Press ◄ or ► to select Head Height, and then press ▼.
Plain Paper
Head Height ↓
5.
Press ◄ or ► to select Printhead, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Head Height
= Automatic
Important
• If you switch to another type of paper after printing, reset the Printhead height to Automatic.
614 Maintenance
Adjusting the feed amount
Adjusting the feed amount
Adjusting the Feed Amount Automatically
If printed images are affected by banding in different colors, adjust the amount that paper is fed. There are
two modes for adjusting the amount paper is fed, Standard Adj. and Advanced Adj. Advanced Adj. offers
a wider range of adjustment than Standard Adj. If using Standard Adj. does not eliminate streaks, or if
streaks are quite noticeable, try Advanced Adj.
Follow the steps below for standard automatic adjustment of the feed amount.
When using highly transparent media for which automatic adjustment is not supported, you must adjust the
feed amount manually. For instructions on manual adjustment, see “Adjusting the Feed Amount Manually”.
(→P.619)
Note
• To adjust the measurement scale and ensure accuracy (so that lines in CAD drawings are printed
at exactly the right length, for example), specify the amount of paper stretching or shrinkage when
adjusting the feed amount. (→P.624)
• Use paper of the same type and size for adjustment as you will use for printing.
Important
• Use paper of the same type and size for adjustment as you will use for printing.
• To apply the results of adjusting the feed amount in printing, you must rst set Feed Priority to Band
Joint. Note that if you select Automatic, the results of adjustment will only be applied in printing if you
set Print Priority in the printer driver to Image or Ofce Document. (→P.203)
Maintenance 615
Adjusting the feed amount
Follow these steps to change the Feed Priority setting.
1. Press the Menu button to display MAIN MENU.
2. Press ◄ or ► to select Med.Detail Set., and then press the ▼ button.
3. Press ◄ or ► to select the type of paper, and then press the ▼ button.
4. Press ◄ or ► to select Feed Priority, and then press the ▼ button.
5. Press ◄ or ► to select the level of suction against paper on the Band Joint, and then press
the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Follow the steps below to adjust the feed amount automatically.
1.
Prepare one unused sheet A4/Letter-sized or larger when Standard Adj. is selected or two
when Advanced Adj. is selected.
When using a roll, load an unused roll 10 inches (254 mm) or wider.
• Loading Rolls on the Roll Paper Holder (→P.115)
• Loading Rolls in the Roll Feed Unit (→P.118)
• Loading Sheets in the Cassette (→P.156)
• Loading Sheets Manually (→P.159)
Note
• Always specify the paper type when loading paper. Using paper that you have not specied on the
printer may cause feeding problems and affect the printing quality.
• We recommend using the type of paper you use most often for feed amount adjustment.
2.
Press the Menu button to display MAIN MENU.
3.
Press ◄ or ► to select Adjust Printer, and then press ▼.
MAIN MENU
Adjust Printer ↓
4.
Press ◄ or ► to select Auto Band Adj., and then press ▼.
Adjust Printer
Auto Band Adj. ↓
5.
Press ◄ or ► to select Standard Adj., and then press ▼.
Auto Band Adj.
Standard Adj. ↓
616 Maintenance
Adjusting the feed amount
6.
Press ◄ or ► to select Yes, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Standard Adj.
= Yes
Note
• The following screen will be displayed when feeding paper automatically. In this case, select the
paper source, and then press the OK button.
Media Source
= Roll
A test pattern is printed for band adjustment.
After reading the pattern, the printer automatically adjusts the feed amount and returns to online
mode.
If printed documents are still affected by uneven contrast or banding in different colors at regular
intervals after this adjustment, you can adjust the feed amount during printing. (→P.618)
Maintenance 617
Adjusting the feed amount
Adjusting the feed amount during printing
If, during printing, the contrast is uneven sideways across the paper or banding in different colors appears
every 40 mm (1.6 in) or so, try adjusting the feed amount as follows. However, note that because printing is
paused, colors may be slightly different.
1.
Press the Online button to pause printing.
2.
Press the Menu button to display MAIN MENU.
3.
Press ◄ or ► to select Fine Band Adj., and then press the OK button.
MAIN MENU
Fine Band Adj. ↓
4.
Press ◄ or ► to change the value, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Fine Band Adj.
=+2
Note
• The supported range is -5 to +5.
5.
Press the Online button to resume printing.
Note
• The Fine Band Adj. value set during printing is also applied to the next print job. However, if you adjust
the feed amount (manually or automatically), the Fine Band Adj. value is reset to 0.
618 Maintenance
Adjusting the feed amount
Adjusting the Feed Amount Manually
If printed images are affected by banding in different colors, adjust the amount that paper is fed.
This topic describes how to adjust the feed amount manually.
When using highly transparent media for which automatic adjustment is not supported, adjust the feed amount
manually. We recommend automatic adjustment for other types of media. For instructions on automatic
adjustment, see “Adjusting the Feed Amount Automatically”. (→P.615)
Note
• To adjust the measurement scale and ensure accuracy (so that lines in CAD drawings are printed
at exactly the right length, for example), specify the amount of paper stretching or shrinkage when
adjusting the feed amount. (→P.624)
Important
• Use paper of the same type and size for adjustment as you will use for printing.
• To apply the results of adjusting the feed amount in printing, you must rst set Feed Priority to Band
Joint. Note that if you select Automatic, the results of adjustment will only be applied in printing if you
set Print Priority in the printer driver to Image or Ofce Document. (→P.203)
Follow these steps to change the Feed Priority setting.
1. Press the Menu button to display MAIN MENU.
2. Press ◄ or ► to select Med.Detail Set., and then press the ▼ button.
3. Press ◄ or ► to select the type of paper, and then press the ▼ button.
4. Press ◄ or ► to select Feed Priority, and then press the ▼ button.
5. Press ◄ or ► to select Band Joint, and then press the OK button.
Follow the steps below to adjust the feed amount manually.
1.
When using sheets, load two unused sheets A4/Letter-sized or larger.
When using a roll, load a roll 10 inches (254 mm) or wider.
• Loading Rolls on the Roll Paper Holder (→P.115)
• Loading Rolls in the Roll Feed Unit (→P.118)
• Loading Sheets in the Cassette (→P.156)
• Loading Sheets Manually (→P.159)
Note
• Always make sure the loaded paper matches the media type setting. Adjustment cannot be
completed correctly unless the setting value matches the loaded paper.
• We recommend using the type of paper you use most often for adjustment.
Maintenance 619
Adjusting the feed amount
2.
Press the Menu button to display MAIN MENU.
3.
Press ◄ or ► to select Adjust Printer, and then press the ▼ button.
MAIN MENU
Adjust Printer ↓
4.
Press ◄ or ► to select Manual Band Adj, and then press the ▼ button.
Adjust Printer
Manual Band Adj ↓
5.
Press ◄ or ► to select Yes, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Manual Band Adj
= Yes
Test pattern A is printed for band adjustment.
6.
Examine test pattern A for band adjustment. After you determine the pattern in which streaks are
least noticeable, press ◄ or ► to choose the pattern number, and then press the OK button.
Adj.Setting
=8
Test pattern B is printed for band adjustment.
Note
• If streaks seem least noticeable in two patterns but you cannot decide which one is better, choose an
intermediate value. For example, choose 11 if you cannot decide whether pattern 10 or 12 is better.
620 Maintenance
Adjusting the feed amount
7.
Examine test pattern B for band adjustment. After you determine the pattern in which streaks are
least noticeable, press ◄ or ► to choose the pattern number, and then press the OK button.
Adj.Setting
=11
The feed amount is adjusted, and the printer goes online.
If printed documents are still affected by uneven contrast or banding in different colors at regular
intervals after this adjustment, you can adjust the feed amount during printing. (→P.621)
Adjusting the feed amount during printing
If, during printing, the contrast is uneven sideways across the paper or banding in different colors appears
every 40 mm (1.6 in) or so, try adjusting the feed amount as follows. The results of adjustment are applied to
printing in progress, enabling you to check the results immediately. However, note that because printing is
paused, colors may be slightly different.
1.
Press the Online button to pause printing.
2.
Press the Menu button to display Menu Durng Prtng.
3.
Press ◄ or ► to select Fine Band Adj., and then press the OK button.
MAIN MENU
Fine Band Adj. ↓
Maintenance 621
Adjusting the feed amount
4.
Press ◄ or ► to change the value, and then press the OK button.
Fine Band Adj.
=+2
Note
• The supported range is -5 to +5.
5.
Press the Online button to resume printing.
Note
• The Fine Band Adj. adjustment value set during printing is also applied to the next print job. However, if
you adjust the Printhead alignment, the Fine Band Adj. value is reset to 0.
622 Maintenance
Adjusting the feed amount
Adjusting the Vacuum Strength
When printing on heavyweight paper or paper that curls or wrinkles easily, if paper rubs against the printer or
the edge is wrinkled from rubbing, adjusting the level of suction against paper on the Platen may improve
results.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Med.Detail Set., and then press ▼.
MAIN MENU
Med.Detail Set. ↓
3.
Press ◄ or ► to select the type of paper, and then press ▼.
Med.Detail Set.
Plain Paper ↓
4.
Press ◄ or ► to select VacuumStrngth, and then press ▼.
Plain Paper
VacuumStrngth
5.
Press ◄ or ► to select the level of suction against paper on the Platen, and then press the
OK button.
The setting is updated, and an equals sign “=” is displayed at left.
VacuumStrngth
= Automatic
Maintenance 623
Adjusting the feed amount
Adjusting the Measurement Scale for Better Accuracy
To adjust the measurement scale and ensure accuracy (so that lines in CAD drawings are printed at exactly
the right length, for example), specify the amount of paper stretching or shrinkage when adjusting the feed
amount.
Note
• If printed images are affected by banding in different colors, adjust the amount that paper is fed.
(→P.619)
Important
• Use paper of the same type and size for adjustment as you will use for printing.
• To apply the results of adjusting the measurement scale for better accuracy in printing, you must rst set
Feed Priority to Print Length. Note that if you select Automatic, the results of adjustment will only be
applied in printing if you set Print Priority in the printer driver to Line Drawing/Text. (→P.203)
Follow these steps to change the Feed Priority setting.
1. Press the Menu button to display MAIN MENU.
2. Press ◄ or ► to select Med.Detail Set., and then press the ▼ button.
3. Press ◄ or ► to select the type of paper, and then press the ▼ button.
4. Press ◄ or ► to select Feed Priority, and then press the ▼ button.
5. Press ◄ or ► to select Print Length, and then press the OK button.
Follow these steps to adjust the scale for better accuracy.
1.
Load unused paper.
• Loading Rolls on the Roll Paper Holder (→P.115)
• Loading Rolls in the Roll Feed Unit (→P.118)
• Loading Sheets in the Cassette (→P.156)
• Loading Sheets Manually (→P.159)
Note
• Always specify the paper type when loading paper. When the paper type is not specied, the printing
quality may be affected without the correct adjustment of the feeding.
• We recommend using the type of paper you use most often for feed amount adjustment.
624 Maintenance
Adjusting the feed amount
2.
Press the Menu button to display MAIN MENU.
3.
Press ◄ or ► to select Adjust Printer, and then press ▼.
MAIN MENU
Adjust Printer ↓
4.
Press ◄ or ► to select Adjust Length, and then press ▼.
Adjust Printer
Adjust Length ↓
5.
Press ◄ or ► to select Yes, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Adjust Length
= Yes
A test pattern is printed for adjustment based on the amount of paper stretching or shrinkage.
The scale bar shows “Millimeter” in 50 mm units and “Inch” in 1 inch units.
6.
Measure the length of the adjustment pattern. Calculate the difference between the measured
length and actual length. Enter it as a percentage and press the OK button.
You can adjust the value in 0.02% increments. Press ◄ to increase the value and ► to decrease
it.
Adjust Length
=0.02%
If the scale is printed shorter than actual size, set the value toward the positive side; if it is printed
longer, set the value toward the negative side.
The setting for the amount of paper stretching or shrinkage is relative. If you access it again
later, it will be displayed as 0.00%.
Note
• You can also specify the adjustment value by selecting Adjust Length in Med.Detail Set..
Maintenance 625
Adjusting the feed amount
Adjusting Color on the Trailing Edge of Sheets
If printed sheets are affected by banding in different colors toward the end of the sheet (about 20-30 mm from
the edge), try adjusting the feed amount of the trailing edge of sheets.
Follow these steps for standard automatic adjustment of the feed amount.
Note
• If printed documents (including documents printed on rolls) are affected by banding in different colors
not only toward the end of the sheet but throughout the printed area, try adjusting the overall feed
amount. (→P.619)
• This adjustment is only possible when feeding paper from the Cassette or Top Paper Feed Slot that can
be set up with a margin on the trailing edge of 3 mm (0.12 in). If you use paper for which you cannot
specify a trailing margin of 3 mm, it will be automatically ejected, and adjustment is not possible.
1.
Load a sheet of unused paper A4/Letter-sized or larger.
Note
• Always make sure the loaded paper matches the media type setting on the printer. Adjustment
cannot be completed correctly unless the setting value matches the loaded paper.
• We recommend using the type of paper you use most often for adjustment.
2.
Press the Menu button to display MAIN MENU.
3.
4.
5.
Press ◄ or ► to select Adjust Printer, and then press the ▼ button.
Press ◄ or ► to select Adj Far Ed Feed, and then press the ▼ button.
Press ◄ or ► to select Yes, and then press the OK button.
A test pattern is printed for adjustment.
C1 is displayed on the Control Panel.
626 Maintenance
Adjusting the feed amount
6.
Examine test pattern C1 for adjustment. After you determine the pattern in which streaks are
least noticeable, press the ◄ or ► to choose the pattern number, and then press the OK button.
C2 is displayed on the Control Panel.
7.
Examine test pattern C2 for adjustment. After you determine the pattern in which streaks are
least noticeable, press the ◄ or ► to choose the pattern number, and then press the OK button.
The printer now goes back online.
Note
• If streaks seem least noticeable in two patterns but you cannot decide which one is better, choose an
intermediate value. For example, choose 11 if you cannot decide whether pattern 10 or 12 is better.
Maintenance 627
Color adjustment
Color adjustment
Using Color Calibration to Adjust Colors
Color calibration is a feature that compensates for changes in color from individual variation among Printheads
or from the printing environment, ensuring better color consistency.
We recommend using color calibration in the following situations.
• After initial installation
• After Printhead replacement
• If colors seem different from before when printing under the same conditions in the same printing
environment
• When consistent color is desired from multiple printers (in this case, also use the same version of
rmware and printer driver and the same settings.)
When you execute color calibration, a test pattern is printed and an adjustment value is automatically set
based on the results of printing.
Important
• Before executing color calibration, you must prepare one of the following types of paper. Note that
various environmental conditions are recommended for various types of paper. Use the printer under
the recommended environmental conditions for the paper to be used. For details on recommended
environmental conditions for various paper, see the Paper Reference Guide. (→P.107)
Paper Compatible With
Color Calibration
Japan
Europe
Americas
Matte Coated 90
-
Compatible
Compatible
HW Coated
Compatible
Compatible
Compatible
Premium MatteP
Compatible
Compatible
Compatible
Matte Photo
Compatible
Compatible
Compatible
GlossyPhoto 190
-
Compatible
Compatible
SatinPhoto 190
Compatible
Compatible
Compatible
GlossyPhoto 240
-
Compatible
Compatible
SatinPhoto 240
-
Compatible
Compatible
Glossy Photo
Compatible
Compatible
Compatible
HW GlossyPhoto2
Compatible
Compatible
Compatible
HW SemiGlPhoto2
Compatible
Compatible
Compatible
Photo PaperPlus
Compatible
Compatible
Compatible
FineArt Photo
Compatible
Compatible
Compatible
FneArt HW Photo
Compatible
Compatible
Compatible
Comm Proong
-
Compatible
Compatible
628 Maintenance
Color adjustment
RC Proong 210
-
Compatible
Compatible
Proong Paper
Compatible
Compatible
Compatible
Opaque Paper
-
Compatible
-
Art Extr Smooth
-
Compatible
-
• The adjustment value determined by color calibration is also applied when printing on paper other than
the paper you use to execute color calibration.
• In the printer driver or in the MAIN MENU of the Control Panel, you can specify whether to apply the
adjustment value from color calibration when printing. The printer driver settings are given priority.
For menu details, see “Main Menu Settings”. (→P.47)
For information on printer driver settings, refer to the following topics.
• Printer Driver Settings (Windows) (→P.465)
• Printer Driver Settings (Mac OS X) (→P.516)
• Printer Driver Settings (Mac OS 9) (→P.541)
• Before color calibration, ensure the printer is not exposed to direct sunlight or other strong sources of
light.
• If you reinstall the printer driver and change the region selection of the Media Conguration Tool,
region-specic paper information originally registered on the printer before installation will be deleted. If
the information of paper you used for color calibration is deleted, such color calibration can no longer be
applied to any type of paper. To apply the results of color calibration, perform color calibration again
using paper supported in the newly selected region and compatible with color calibration. See the Media
Conguration Tool Guide (Windows) or Media Conguration Tool Guide (Macintosh).
• Default settings will be restored if you select MAIN MENU > System Setup > Reset MediaType > Yes.
Because information added or updated using the Media Conguration Tool is also deleted, if paper of
which information was added using the Media Conguration Tool was used for color calibration and is
now deleted, such color calibration can no longer be applied to any type of paper. To apply the results
of color calibration, perform color calibration again using a paper included originally in the default
settings that is compatible with color calibration. See the Media Conguration Tool Guide (Windows)
or Media Conguration Tool Guide (Macintosh).
Note
• For further adjustment of the color of documents as printed applying color calibration, adjust the color in
the printer driver. (→P.214)
• You can check when color calibration was executed and what paper was used from imagePROGRAF
Status Monitor (in Windows) or imagePROGRAF Printmonitor (on a Macintosh computer) in the MAIN
MENU on the Control Panel.
For menu details, see “Main Menu Settings”. (→P.47)
For details on imagePROGRAF Status Monitor, refer to the imagePROGRAF Status Monitor help.
For details on imagePROGRAF Printmonitor, refer to the imagePROGRAF Printmonitor help.
Maintenance 629
Color adjustment
Follow these steps to execute color calibration.
1.
Load paper compatible with color calibration.
When using sheets, load paper A4/Letter (vertical, 8.5×11 in [210.0×297.0 mm] ) or larger.
One sheet is required.
When using a roll, load a roll 10 inches (254 mm) or wider.
• Loading and Printing on Sheets in the Cassette (→P.80)
• Loading and Printing on Rolls (→P.82)
• Loading and Printing on Sheets in the Paper Feed Slot (→P.86)
2.
Press the Menu button to display MAIN MENU.
3.
Press ◄ or ► to select Adjust Printer, and then press the ▼ button.
MAIN MENU
Adjust Printer ↓
4.
Press ◄ or ► to select Calibration, and then press ▼.
Adjust Printer
Calibration ↓
5.
Press ◄ or ► to select Auto Adjust, and then press the ▼ button.
Calibration
Auto Adjust ↓
6.
Press ◄ or ► to select Yes, and then press the OK button.
Auto Adjust
= Yes
After the printer measures environmental conditions and checks the paper, a test pattern for color
calibration is printed. An adjustment value based on the results of printing is set automatically.
After adjustment is complete, the printer goes online or ofine automatically.
630 Maintenance
Color adjustment
Printing in Ideal Colors for Light in the Viewing
Environment
You can print in the colors that look best when viewed under the light where the printed image will be displayed.
There are two ways to adjust the color tone for the ambient light, as follows.
By selecting color tones on Charts before printing
On the printed Chart, note the number of the set of colors with the desired color tone and enter this number in
the printer driver before printing.
Important
• This function requires that the Light Source Check Tool be installed.
• You can install the Light Source Check Tool from the User Software CD-ROM.
• This function is only supported in Windows.
For instructions on selecting color tones on Charts before printing, refer to the following topic:
• By selecting color tones on Charts before printing (Windows) (→P.632)
Printing in Colors Matching the Measured Ambient Light
Measure the light level in the viewing environment and enter the results in the printer driver before printing.
Important
• This function requires the Eye-One spectrophotometer. The Light Source Measure Tool must also
be installed.
• You can install the Light Source Measure Tool from the User Software CD-ROM.
• For a list of supported Eye-One devices, refer to the manual provided with the Light Source Measure
Tool.
• This function is only supported in Windows.
For instructions on measuring light levels before printing, refer to the following topic:
• Printing in Colors Matching the Measured Ambient Light (→P.636)
Maintenance 631
Color adjustment
By selecting color tones on Charts before printing
(Windows)
Print Charts, note the number of the chart with your desired color tone, and enter this number in the printer
driver before printing.
Important
• This function requires that the Light Source Check Tool be installed.
• You can install the Light Source Check Tool from the User Software CD-ROM.
1.
2.
3.
Choose Print in the application menu.
4.
In the A Media Type list, select the type of paper that is loaded (for example, Glossy Photo
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Paper).
Important
• Ambient Light Matching Mode (Kyuanos) may not be available, depending on the type of paper
used. For details, see “Types of Paper”. (→P.107)
632 Maintenance
Color adjustment
5.
Click D Advanced Settings to switch the print mode.
6.
In F Print Quality, click Highest or High.
Important
• Ambient Light Matching mode is only available when the F Print Quality is set to Highest or High.
7.
8.
9.
10.
Click Color in the G Color Mode list.
11.
Conrm that By selecting a chart number is selected in C Setting Method.
Click H Color Settings to display the Color Settings dialog box.
Click the Matching tab to display the Matching sheet.
Click Ambient Light Matching Mode (Kyuanos) in the A Matching Mode list.
If it is not selected already, select it.
Maintenance 633
Color adjustment
12.
Click D Print Chart.
Light Source Check Tool now starts up.
13.
Check the settings and click Print.
The Chart is printed.
14.
In the viewing environment, determine the number of the set of images on the Chart in which all
four vertical images have the best overall color tone.
Note
• Choose the number of the set of images in which the people, the blue of the sky, and the red of
the strawberries look the most natural overall.
634 Maintenance
Color adjustment
15.
After conrming that Ambient Light Matching Mode (Kyuanos) is selected in A Matching
Mode, select the number for the desired color tone on the chart in E Chart Number.
16.
17.
Click OK.
Conrm the print settings and start printing.
Maintenance 635
Color adjustment
Printing in Colors Matching the Measured Ambient Light
Measure the light level in the viewing environment and enter the results in the printer driver before printing.
Important
• This function requires the Eye-One spectrophotometer. The Light Source Measure Tool must also
be installed.
• You can install the Light Source Measure Tool from the User Software CD-ROM.
• For a list of supported Eye-One devices, refer to the manual provided with the Light Source Measure
Tool.
1.
Using the Eye-One spectrophotometer and the Light Source Measure Tool, determine the
Lighting Source Type and Color Temperature in the viewing environment.
Note
• For detailed instructions on Eye-One and the Light Source Measure Tool, refer to the provided
instructions.
2.
3.
4.
Choose Print in the application menu.
5.
In the A Media Type list, select the type of paper that is loaded (for example, Glossy Photo
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.497)
Make sure the Main sheet is displayed.
Paper).
Important
• Ambient Light Matching Mode (Kyuanos) may not be available, depending on the type of paper
used. For details, see “Types of Paper”. (→P.107)
636 Maintenance
Color adjustment
6.
Click D Advanced Settings to switch the print mode.
7.
In F Print Quality, click Highest or High.
Important
• Ambient Light Matching mode is only available when the F Print Quality is set to Highest or High.
8.
9.
10.
11.
Click Color in the G Color Mode list.
Click H Color Settings to display the Color Settings dialog box.
Click the Matching tab to display the Matching sheet.
Click Ambient Light Matching Mode (Kyuanos) in the A Matching Mode list.
Maintenance 637
Color adjustment
12.
Select By entering values directly in C Setting Method.
13.
14.
15.
Select the F Lighting Source Type and G Color Temperature determined in step 1.
Click OK.
Conrm the print settings and start printing.
638 Maintenance
Color adjustment
Accessing the Printer Driver Dialog Box from
Applications (Windows)
1.
2.
Choose Print from the File menu to display the dialog box for printing conditions.
Select the printer, and then display the printer driver dialog box.
Note
• The dialog box for specifying printing conditions varies depending on the source application. In some
cases, when you select the printer, a sheet for conguring the printer driver is added to the dialog box.
In the following case, click Preferences.
■Example: Print dialog box displayed by the application software
Six sheets of print settings are displayed by the printer driver: Main, Page Setup, Layout,
Favorites, Utility, and Support.
Note
• The titles of dialog boxes may vary depending on the application, and sheets other than these
six sheets may be displayed.
Maintenance 639
Color adjustment
Important
• If you access the printer driver dialog box from the source application, changes you make to the settings
will only apply temporarily to that application. Because these are sizes you specify temporarily in the
printer driver, the sizes will not be available after you exit the application.
• You can also access the printer driver dialog box from the Windows system menu.
see “Accessing the Printer Driver Dialog Box from the Operating System Menu (Windows)”. (→P.149)
640 Maintenance
Ink Tanks
Ink Tanks
Ink Tank
An Ink Tank that can be used in the printer is labeled with a white letter “H” in a black circle on the side.
When purchasing an Ink Tank, make sure an “H” is printed on the label, along with the following Ink Tank
part numbers.
•
•
•
•
•
•
•
•
•
•
•
•
Y Ink Tank PFI-101Y
PC Ink Tank PFI-101PC
C Ink Tank PFI-101C
PGY Ink Tank PFI-103PGY
GY Ink Tank PFI-103GY
BK Ink Tank PFI-103BK
PM Ink Tank PFI-101PM
M Ink Tank PFI-101M
MBK Ink Tank PFI-103MBK
R Ink Tank PFI-101R
G Ink Tank PFI-101G
B Ink Tank PFI-101B
130 ml per color
Note
• For instructions on replacing Ink Tank, see “Replacing Ink Tanks”. (→P.642)
Maintenance 641
Ink Tanks
Replacing Ink Tanks
Compatible Ink Tank
An Ink Tank that can be used in the printer is labeled with a white letter “H” in a black circle on the side.
Request an Ink Tank with the same label when you purchase a new Ink Tank. For more information, see “Ink
Tank”. (→P.641)
Precautions when handling an Ink Tank
Take the following precautions when handling an Ink Tank.
Caution
• For safety, keep an Ink Tank out of the reach of children.
• If ink is accidentally ingested, contact a physician immediately.
Important
• Before removing an Ink Tank from the pouch for installation, shake it gently seven or eight times. If you
do not shake the Ink Tank, the ink may sediment, which may affect printing quality.
• Do not remove an Ink Tank to shake it once installed in the printer. Ink may leak out.
• Avoid dropping the Ink Tank after removing it from the pouch. Otherwise, ink may leak and cause stains.
• There may be ink around the ink holes of Ink Tank you remove. Handle an Ink Tank carefully during
replacement. The ink may stain clothing.
• We recommend using up an Ink Tank in the course of printing within six months after breaking the seal.
Using an old Ink Tank may affect the printing quality.
• Do not remove the Ink Tank if the printer is not used for a long period (a month or more). Ink remaining
in the printer may become clogged and affect the printing quality.
642 Maintenance
Ink Tanks
Replacing an Ink Tank
1.
Make sure no print jobs are in progress.
It is time to replace an Ink Tank if any of these messages are shown on the Display Screen : Ink
Lvl: Chk xx, No Ink Left, Ink Tank / Check xx, Ink Tank / Replace xx, Online Key / Press To
Print, or Not Enough Ink. (In these examples, xx represents an abbreviation for ink colors.)
Ink Tank
Replace xx
Do not remove an Ink Tank during initialization immediately after turning on the printer, or during
printing or printhead cleaning.
Initializing
Note
• Ink Tank replacement is possible even when print jobs are being canceled or if paper is being fed.
• Replacement of Ink Tank is possible even during print jobs if No Ink Left is shown on the Display
Screen, but it is not possible to replace Ink Tank in other cases. If you pause printing to replace an
Ink Tank, it may cause the printed images to be blurry.
Maintenance 643
Ink Tanks
2.
Open the Ink Tank Cover and check the Ink Lamp.
The Ink Lamp ashes quickly if there is no ink left.
Note
• Ink levels are shown on the Display Screen of the control panel, and the level indicator corresponding
to the Color Label of the Ink Tank for replacement ashes.
3.
Press the tip of the Ink Tank Lock Lever of the color for replacement and lift the Ink Tank Lock
Lever to open it.
644 Maintenance
Ink Tanks
4.
Hold the empty Ink Tank by the grip and remove it.
Note
• If there is still some ink left in the Ink Tank you removed, store the ink tank with the ink holes (a)
facing up. Otherwise, ink may leak and cause stains.
• Dispose of used Ink Tanks according to local regulations.
5.
Before opening the pouch, shake the Ink Tank gently seven or eight times. Agitate the ink in the
Ink Tank by rotating your wrist to turn the Ink Tank upside-down and right side up repeatedly.
Note
• If you do not shake the Ink Tank, the ink may sediment, which may affect printing quality.
Maintenance 645
Ink Tanks
6.
Open the pouch and remove the Ink Tank.
Note
• Never touch the ink holes or metal contacts. This may cause stains, damage the Ink Tank, and
affect printing quality.
• Avoid dropping the Ink Tank after removing it from the pouch. Otherwise, ink may leak and cause
stains.
• Do not remove an Ink Tank to shake it once installed in the printer. Ink may leak out.
7.
Insert the Ink Tank into the holder facing as shown in the gure, with the ink holes down.
Important
• An Ink Tank cannot be loaded in the holder if the color or orientation is wrong.
If the Ink Tank does not t in the holder, do not force it into the holder. Make sure the color of the
Ink Tank Lock Lever matches the color of the Ink Tank, and check the orientation of the Ink Tank
before reloading it.
646 Maintenance
Ink Tanks
8.
Close the Ink Tank Lock Lever until it clicks.
9.
Make sure the Ink Lamp is lit in red.
Note
• Ink Lamp ashes when there is little ink left.
10.
Close the Ink Tank Cover.
The printer returns to the mode before replacement of Ink Tank. If the printer was in Menu mode
or an error message was shown on the Display Screen, the printer goes online. If a print job was
in progress when the Ink Tank was replaced, printing is automatically resumed.
Maintenance 647
Ink Tanks
Checking Ink Tank Levels
On the Display Screen, you can check how much ink is left in the Ink Tank.
The remaining level of each ink is displayed on the Display Screen bottom line when the printer is online,
except during print jobs or error messages.
During print jobs or error messages, press the Information button to display the ink levels on the Display
Screen bottom line.
These levels shown on the Display Screen correspond to the inks identied by the Color Label below the
Display Screen. The remaining ink level is indicated as shown below.
When Not Enough Ink or No Ink Left appears on the Display Screen, a “↓” symbol is shown above the
Ink Tank without much ink left.
If Rep. Ink Tank is shown on the Display Screen, replace the Ink Tank. If Ink Lvl: Chk xx (here, xx refers to
the ink color) is displayed, and particularly before large-format printing or head cleaning, which consumes a
lot of ink, check the ink levels and replace Ink Tank as needed. (→P.642)
648 Maintenance
Ink Tanks
When to Replace Ink Tanks
Replace or prepare to replace Ink Tank in the following situations.
If a message for checking the ink is shown on the Display Screen
"Check Ink Level: xx" (here, xx refers to the ink color) is shown on the Display Screen and the Message
lamp is lit when there is little ink left in a tank. You can continue to print, but prepare to replace the Ink
Tank. (→P.648)
Online
Ink Lvl: Chk xx
ISO A2
Before print jobs and maintenance that consume a lot of ink
If little ink is left, there may not be enough for large-format printing, head cleaning, and maintenance, which
require a lot of ink. In this case, replace or prepare to replace the Ink Tank before maintenance. The ↓ display
corresponds to the color labels on the bottom of the Display Screen.
Not Enough Ink
↓ ↓↓
If a message for ink replacement is shown on the Display Screen
When ink runs out, No Ink Left is shown on the Display Screen, the Message lamp ashes, and printing is
disabled. Replace the Ink Tank at this point. The ↓ display corresponds to the color labels on the bottom
of the Display Screen.
No Ink Left
↓ ↓↓
Maintenance 649
Printheads
Printheads
Printhead
This is a replacement Printhead for the printer.
• Printhead PF-03
Note
• For instructions on replacing the Printhead, see “Replacing the Printhead”. (→P.653)
Checking the Print Quality
If printing is faint or streaked in different colors, make sure the Printhead nozzles are clear by printing a test
pattern to check the nozzles.
For instructions, see “Checking for Nozzle Clogging”. (→P.651)
Improving the Print Quality
If printing is faint or streaked in different colors, make sure the Printhead nozzles are clear by printing a test
pattern to check the nozzles. Clean the Printhead if the printed test pattern was faint.
For instructions on cleaning the Printhead, see “Cleaning the Printhead”. (→P.652)
650 Maintenance
Printheads
Checking for Nozzle Clogging
If printing is faint or is affected by streaks in different colors, make sure the Printhead nozzles are clear by printing
a test pattern to check the nozzles.
Note
• You can specify a number of pages in the printer’s Nozzle Check menu for automatic nozzle checking
every time you nish printing that quantity. (→P.47)
1.
Load unused paper Letter-sized or larger.
• Loading Rolls on the Roll Paper Holder (→P.115)
• Loading Rolls in the Roll Feed Unit (→P.118)
• Loading Sheets in the Cassette (→P.156)
• Loading Sheets Manually (→P.159)
2.
Press the Menu button to display MAIN MENU.
3.
Press ◄ or ► to select Test Print, and then press ▼.
MAIN MENU
Test Print ↓
4.
Press ▲ or ▼ to select Nozzle Check, and then press the OK button.
The printer goes online and prints a test pattern.
5.
Check the printing results.
The Printhead L prints the test pattern for nozzle checking on the top line for each color, and the
Printhead R prints the test pattern on the bottom line.
If the horizontal lines are not faint or incomplete, the nozzles are clear.
If some sections of the horizontal lines are faint or incomplete, the nozzles for those colors
are clogged.
If horizontal lines are faint or incomplete, follow the steps below and check again for nozzle
clogging.
1. Clean the Printhead. (→P.652)
2. Print a test pattern to check the nozzles.
Note
• If you repeat these steps several times but the horizontal lines are still faint or incomplete, contact
your Canon dealer.
Maintenance 651
Printheads
Cleaning the Printhead
Cleaning the Printhead may help clear nozzles that are clogged.
Note
• You can perform automatic nozzle checking and cleaning every time you nish printing that quantity by
specifying a number of pages in the printer’s Nozzle Check menu. (→P.47)
• You can start Head Cleaning A by holding down the Information button for three seconds or more.
• If POP Board (paper thickness 1.5 mm [0.06 in]) is loaded in Front Paper Feed Slot, printhead cleaning
will not work correctly. Remove the paper before cleaning.
Cleaning the Printhead
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Head Cleaning, and then press ▼.
MAIN MENU
Head Cleaning ↓
3.
Press ◄ or ► to select the type of cleaning, and then press the OK button.
• Head Cleaning A
Use Head Cleaning A if printing is faint or contains foreign substances. This method of cleaning
consumes the least amount of ink. It takes about four minutes to complete.
• Head Cleaning B
Use Head Cleaning A if no ink comes out of the printhead, or if Head Cleaning B does not solve the
problem. It takes about six minutes to complete.
The setting is updated, and an equals sign “=” is displayed at left.
Head Cleaning
= Head Cleaning A
The printhead cleaning is nished, and the printer goes online.
4.
Print a test pattern to check the nozzles, and determine whether cleaning has cleared the
nozzles. (→P.651)
Note
• If printing does not improve after Head Cleaning A, try Head Cleaning B. If this does not solve
the problem, repeat Head Cleaning B two or three times. If this still does not improve printing, the
Printhead may have reached the end of its useful life. Contact your Canon dealer.
652 Maintenance
Printheads
Replacing the Printhead
When to replace the Printhead
Replace the Printhead in the following situations.
• If the printing quality does not improve even after two cycles of Head Cleaning B from the printer menu
• If Printhead / Please Replace is shown on the Display Screen
• If the Canon dealer has advised you to replace the Printhead
Compatible Printhead
For information on the compatible Printhead, see “Printhead”. (→P.650)
Precautions when handling the Printhead
Take the following precautions when handling the Printhead.
Caution
• For safety, keep the Printhead out of the reach of children.
• If ink is accidentally ingested, contact a physician immediately.
• Do not touch the Printhead immediately after printing. The Printhead becomes extremely hot, and
there is a risk of burns.
Important
• Avoid dropping or shaking the Printhead. Otherwise, ink may leak and cause stains.
• There may be ink around the nozzles of the Printhead you remove. Handle the Printhead carefully
during replacement. The ink may stain clothing.
• Do not open the Printhead pouch until immediately before installation. After removing the Printhead
from the pouch, install it right away. If the Printhead is left after the pouch is opened, the nozzles
may dry out, which may affect the printing quality.
• If you need to store a Printhead temporarily before installation, do not keep the nozzles and metal
contacts (→P.658) facing down. If the nozzles or metal contacts are damaged, it may affect the
printing quality.
• Never attempt to take apart or modify a Printhead. This may damage the printer.
• Never touch the Printhead nozzles or the metal contacts. This may cause printing problems.
Maintenance 653
Printheads
Replacing the Printhead
Follow the steps below to replace the Printhead. Failure to follow this procedure may cause ink leak from
the Printhead, which may cause stains.
Note
• Prepare a new Ink Tank when ink levels are low.
• Your hands may become dirty during Printhead replacement. Use the gloves provided with the new
Printhead for replacement.
• Choose On in Auto Print to have the printer automatically adjust the Printhead alignment after
replacement of the Printhead. (→P.47)
1.
If the roll is not ejected because of the cutting method selected, cut it manually and remove it.
(→P.447)
2.
3.
Clean inside the Top Cover. (→P.670)
4.
Press ◄ or ► to select Maintenance, and then press ▼.
Press the Menu button to display MAIN MENU.
MAIN MENU
Maintenance ↓
5.
Press ◄ or ► to select Replace P.head, and then press ▼.
Maintenance
Replace P.head ↓
6.
Press ◄ or ► to select Printhead, and then press ▼.
Select Left Printhead to replace the left Printhead or select Right Printhead to replace the
right Printhead.
Replace P.head
Left Printhead ↓
654 Maintenance
Printheads
7.
Press ◄ or ► to select Yes, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Replace P.head
= Yes
Please Wait.. is shown on the Display Screen, and excess ink is absorbed.
Replace P.head
Please Wait..
After about three minutes, Open UpperCover is shown on the Display Screen.
Replace P.head
Open UpperCover
8.
Open the Top Cover.
Rep. P.head OK is shown on the Display Screen.
Replace P.head
Rep. P.head OK
Maintenance 655
Printheads
9.
If the Carriage is dirty, use a damp cloth that you have wrung out completely to wipe it clean.
Important
• Do not touch the Linear Scale (a) or Carriage Shaft (b).
• Never touch the metal contacts of the Carriage. This may damage the printer.
10.
Pull the Printhead Fixer Lever of the Printhead forward all the way to open it completely.
656 Maintenance
Printheads
11.
Pull up the Printhead Fixer Cover to open it completely.
12.
Remove the used Printhead.
Caution
• When replacing the Printhead immediately after printing, wait a few minutes before replacing
it. The metal parts of the Printhead become hot during printing, and there is a risk of burns from
touching these parts.
Note
• Dispose of the used Printhead in accordance with local regulations.
Maintenance 657
Printheads
13.
Holding the new Printhead by the grips (a), remove it from the case.
Important
• When handling the Printhead, always hold it by the grips (a). Never touch the nozzles (b) or the
metal contacts (c). This may damage the Printhead and affect the printing quality.
14.
While rmly holding the Printhead you have removed, use your other hand to remove the orange
Safety Cap 1 (a). Squeeze the grips (c) of Safety Cap 2 (b) and pull it down to remove it.
Important
• Safety Cap 1 (a) may be coated with ink to protect the Printhead. Be careful not to touch areas
other than the grips.
• Never touch the ink supply section (d). This may cause printing problems.
• The inside surface of Safety Cap 2 (b) is coated with ink to protect the nozzles. Handle it carefully to
avoid touching the nozzles or spilling ink. Spilled ink may cause stains. The Printhead contains ink
to protect the nozzles. If this ink is accidentally spilled, it may stain the printer or surrounding area.
We recommend removing the Safety Cap 2 (b) on top of the Printhead package or safely out of the
way. Wipe off any spilled ink with a dry cloth. This ink is not non-toxic.
• Do not reattach the Safety Cap or protective material. Dispose of these materials in accordance
with local regulations.
658 Maintenance
Printheads
15.
With the nozzles facing down and the metal contacts toward the back, insert the Printhead into
the Carriage. Carefully push the printhead rmly into the Carriage, ensuring that the nozzles
or metal contacts do not touch the carriage.
16.
Pull the Printhead Fixer Cover down toward the front to lock the Printhead in place.
17.
Push the Printhead Fixer Lever toward the back of the printer until it clicks.
Maintenance 659
Printheads
18.
Close the Top Cover.
Please Wait.. is shown on the Display Screen, and ink lls the system.
Replace P.head
Please Wait..
After about ten minutes, the Printhead alignment will be automatically adjusted, and the printer
will go online.
Important
• Never remove an Ink Tank while the system is lling with ink.
• If Auto Print is Off in the printer menu, the Printhead alignment will not be adjusted. In this case,
adjust the alignment after Printhead replacement by accessing Advanced Adj. in Auto Head
Adj. (→P.610)
660 Maintenance
Maintenance Cartridge
Maintenance Cartridge
Maintenance Cartridge
This is a replacement Maintenance Cartridge for the printer.
• Maintenance Cartridge MC-05
Note
• For instructions on replacing the Maintenance Cartridge, see “Replacing the Maintenance Cartridge”.
(→P.661)
Replacing the Maintenance Cartridge
Compatible Maintenance Cartridge
For information on the compatible Maintenance Cartridge, see “Maintenance Cartridge”. (→P.661)
Precautions when handling the Maintenance Cartridge
Take the following precautions when handling the Maintenance Cartridge.
Caution
• For safety, keep the Maintenance Cartridge out of the reach of children.
• If ink is accidentally ingested, contact a physician immediately.
Important
• Do not remove the Maintenance Cartridge except to replace it.
• To prevent ink from leaking from a used Maintenance Cartridge, avoid dropping the cartridge or storing it
at an angle. Otherwise, ink may leak and cause stains.
• Ink adheres to the top of the Maintenance Cartridge after it has been used. Handle the Maintenance
Cartridge carefully during replacement. The ink may stain clothing.
• Do not install a used Maintenance Cartridge in another printer.
Maintenance 661
Maintenance Cartridge
Replacing the Maintenance Cartridge
1.
Make sure no print jobs are in progress.
It is time to replace the Maintenance Cartridge if any of these messages are shown on the
Display Screen : Online, Ofine, MTCart Full Soon, and Maint Cartridge / Replace Cart.
Maint Cartridge
Replace Cart
Do not replace the Maintenance Cartridge during initialization immediately after turning on the
printer, or during Printhead cleaning.
Initializing
If you pause printing to replace the Maintenance Cartridge, it may cause the printed images to
be blurry.
2.
Holding the Output Tray on both sides by the far end, press the button to release the lock,
and then remove the tray.
662 Maintenance
Maintenance Cartridge
3.
Hold the handle (a) of the used Maintenance Cartridge and pull out the cartridge. Grasp the
handles on both sides (b) and keep the cartridge level as you remove it.
Important
• Used Maintenance Cartridge is heavy. Always grasp the cartridge handles on both sides rmly and
keep the cartridge level during removal and storage. If you drop a used Maintenance Cartridge or
store it at an angle, ink may leak and cause stains.
• The remaining Maintenance Cartridge capacity is recorded on each printer. Do not install a used
Maintenance Cartridge in another printer.
4.
Open the plastic bag of the new Maintenance Cartridge and remove the packaging material.
Holding the handles on both sides (a), remove the cartridge.
Maintenance 663
Maintenance Cartridge
Important
• Never touch the metal contacts (a). This may damage the Maintenance Cartridge.
5.
Keeping the used Maintenance Cartridge level, put it in the plastic bag that was in the box,
as shown.
6.
Expel air in the plastic bag and seal the zipper. Fold the plastic bag in half.
664 Maintenance
Maintenance Cartridge
7.
Put the used Maintenance Cartridge and packaging material in the box for storage, just like the
new Maintenance Cartridge was, keeping it level.
Important
• Always put the used Maintenance Cartridge back in the box and store the box on a at surface.
Otherwise, ink may leak and cause stains.
• In accordance with its active and ongoing policy to protect the environment, Canon collects used
Maintenance Cartridge. Follow the instructions provided with the new Maintenance Cartridge that
describe how to process the used Maintenance Cartridge.
8.
Holding the handles on both sides of the new Maintenance Cartridge (a), insert it completely,
keeping it level.
Maintenance 665
Maintenance Cartridge
9.
Hold the Output Tray on both sides by the near end. Aligning the Output Tray with the guides (a),
insert it into the printer until it locks in place.
10.
Press the Information button.
Initialization of the new Maintenance Cartridge takes about ve seconds, after which the printer
returns to the mode before replacement of the Maintenance Cartridge. If Maint Cartridge /
Replace Cart is displayed, printing is disabled. Make sure that the Maintenance Cartridge
is installed correctly.
If the printer was in Menu mode or an error message was shown on the Display Screen, the
printer goes online. If a print job was in progress when the Maintenance Cartridge was replaced,
printing is resumed.
Important
• Do not remove the Maintenance Cartridge during about the rst ve seconds after the printer goes
back online. This may damage the Maintenance Cartridge.
• If you replace the Maintenance Cartridge when the printer is off, do not remove the Maintenance
Cartridge during about the rst ve seconds after you turn the printer on again after replacement.
This may damage the Maintenance Cartridge.
666 Maintenance
Maintenance Cartridge
Checking the Maintenance Cartridge Capacity
The Maintenance Cartridge absorbs excess ink from borderless printing, printhead cleaning, ink mist, and so on.
You can conrm the remaining capacity of the Maintenance Cartridge by checking the Maintenance Cartridge
capacity shown on the Display Screen.
The remaining capacity of the Maintenance Cartridge is shown at right on the bottom line of the Display
Screen when the printer is online, except during print jobs or error messages.
During print jobs or error messages, press the Information button to display the Maintenance Cartridge
capacity at right on the bottom line of the Display Screen.
The remaining capacity level of the Maintenance Cartridge is indicated as shown below.
If Maint Cartridge / Replace Cart is shown on the Display Screen, replace the Maintenance Cartridge. If
MTCart Full Soon is displayed, and particularly before cleaning the printhead or transferring the printer, which
may deplete much of the Maintenance Cartridge capacity, check the capacity and replace the Maintenance
Cartridge as needed. (→P.661)
Maintenance 667
Maintenance Cartridge
When to Replace the Maintenance Cartridge
Replace or prepare to replace the Maintenance Cartridge in the following situations.
If a message for checking the Maintenance Cartridge is shown on
the Display Screen
When the Maintenance Cartridge capacity is low, the Message lamp is lit and MTCart Full Soon is
displayed. You can continue to print, but check the Maintenance Cartridge capacity and prepare to replace
the Maintenance Cartridge with a new one. (→P.667)
Online
MTCart Full Soon
ISO A2
When much of the Maintenance Cartridge capacity is depleted
Printhead cleaning, Printhead replacement, and preparations to transfer the printer deplete much of the
Maintenance Cartridge capacity. (In particular, preparing to move the printer depletes a lot of the capacity.)
Check the Maintenance Cartridge capacity, and if necessary, perform maintenance after replacing the Ink
Tank.
Online
MTCart Full Soon
ISO A2
If a message for the Maintenance Cartridge replacement is shown on
the Display Screen
When the Maintenance Cartridge is full, the Message lamp ashes and Maint Cartridge / Replace Cart
is shown on the Display Screen. Printing is disabled, and you cannot replace the Printhead or transfer the
printer. Replace the Maintenance Cartridge at this point.
Maint Cartridge
Replace Cart
668 Maintenance
Cleaning the Printer
Cleaning the Printer
Cleaning the Printer Exterior
Clean the printer regularly to maintain better printing quality and help prevent problems.
About once a month, clean the printer exterior.
1.
2.
Turn the printer off. (→P.20)
Unplug the power cord from the outlet.
Caution
• Always turn off the printer and unplug the power cord before cleaning or maintenance. Accidentally
leaving the printer on poses a risk of injury if you touch moving parts inside the printer.
3.
Using a damp cloth that you have wrung out completely, wipe the exterior surfaces of the printer.
Dry the surfaces with a dry cloth.
Caution
• Never use ammable solvents such as alcohol, benzene, or thinner. If these substances come into
contact with electrical components inside the printer, there is a risk of re or electrical shock.
4.
Plug the power cord into the outlet.
Maintenance 669
Cleaning the Printer
Cleaning Inside the Top Cover
Clean inside the Top Cover about once a month to maintain better printing quality and help prevent problems.
Also clean inside the Top Cover in the following situations to ensure optimal operation.
•
•
•
•
•
•
If the printed surface or the underside of paper is dirty after printing
After you have used up a roll
After borderless printing
After printing on small paper
After printing on paper that generates a lot of cutting debris
If you have replaced the roll
Important
• If the Platen inside the Top Cover becomes dirty, it may soil the underside of paper. We recommend
always cleaning the Platen after borderless printing or printing on small paper.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Maintenance, and then press ▼.
MAIN MENU
Maintenance ↓
3.
Press the ◄ or ► button to select Clean Platen, and then press ▼.
Maintenance
Clean Platen ↓
4.
Press ◄ or ► to select Yes, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Clean Platen
= Yes
The Carriage is moved so that you can clean the Platen.
5.
Open the Top Cover.
670 Maintenance
Cleaning the Printer
6.
If paper dust has accumulated in the Vacuum holes (a) on the Platen or in the Borderless Printing
Ink Grooves (b), use the Cleaning Brush, provided with the printer, to wipe it away.
Note
• If the Cleaning Brush is dirty, rinse it in water.
7.
Using a damp cloth that you have wrung out completely, wipe inside the Top Cover to clean it.
Wipe away any ink residue on the Platen as a whole, the Paper Retainer, and the Borderless
Printing Ink Grooves.
Maintenance 671
Cleaning the Printer
Important
• Do not use a dry cloth to wipe inside the Top Cover. This may create a static charge, which may
attract dust and affect the printing quality.
• Never use ammable solvents such as alcohol, benzene, or thinner. If these substances come into
contact with electrical components inside the printer, there is a risk of re or electrical shock.
• Never touch the Linear Scale (a) or Carriage Shaft (b).
8.
Close the Top Cover.
672 Maintenance
Cleaning the Printer
Cleaning the Paper Retainer
Clean the Paper Retainer about once a month to maintain better printing quality and help prevent problems.
Also clean the Paper Retainer in the following situations to ensure the printer offers a comfortable working
environment.
• If the printed surface or the underside of paper is dirty after printing
• After printing on small paper
Caution
• During cleaning, use a type of paper that does not generate much dust from cutting, such as Plain
Paper. It may affect printing quality if you use lm or other media that are more likely to generate debris
when cut, or that have a surface nish that may come off.
1.
2.
Turn the printer off. (→P.20)
Unplug the power cord from the outlet.
Caution
• Always turn off the printer and unplug the power cord before cleaning and maintenance. Accidentally
leaving the printer on poses a risk of injury if you touch moving parts inside the printer.
3.
4.
Remove the Roll Feed Unit or Paper Tray Unit. (→P.147)
Fold a sheet of Plain Paper two or three times (a) and insert it under the Paper Retainer (b)
behind the printer to wipe the entire surface of the Paper Retainer clean.
5.
6.
Install the Roll Feed Unit or Paper Tray Unit again. (→P.148)
Plug the power cord into the outlet.
Maintenance 673
Cleaning the Printer
Cleaning the Pick Up Roller
Cleaning the Pick Up Roller may solve feeding problems when using the Cassette.
Note
• The menu option Clean Roller is not displayed after you have started supplying paper from a roll or the
tray. Remove the paper to access Clean Roller.
• Clean Roller is not available unless plain paper is used. If you attempt cleaning with other paper,
Load Plain Paper In Cassette is displayed for two seconds, after which the display reverts to the
upper level menu.
1.
2.
Load a sheet of Letter-size plain paper in the Cassette. (→P.80)
3.
Press ◄ or ► to select Maintenance, and then press ▼.
Press the Menu button to display MAIN MENU.
MAIN MENU
Maintenance ↓
4.
Press ◄ or ► to select Clean Roller, and then press ▼.
Maintenance
Clean Roller ↓
5.
Press ◄ or ► to select Yes, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Clean Roller
= Yes
The paper is fed to clean the Pick Up Roller, and the printer goes online.
674 Maintenance
Cleaning the Printer
Cleaning Spurs Used in Paper Feeding
If white dots about 1 mm (0.039 in) apart appear on printed documents in the direction paper is fed, clean
the spurs (a).
During spur cleaning, a Cleaning sheet fed from the Top Paper Feed Slot is repeatedly advanced and
retracted to clean the spurs.
Note
• Spur cleaning requires a Cleaning sheet.
• If the spurs are quite soiled, executing cleaning once may not be enough to clean them completely.
Execute cleaning again if one time is not effective.
• If a roll is loaded, rewind the roll before this procedure. (→P.146)
Important
•
•
•
•
Do not fold the Cleaning sheet.
Do not use a frayed Cleaning sheet or Cleaning sheet that has become very dirty.
If the Cleaning sheet is warped, straighten it before use.
To cancel cleaning, press the Stop/Eject button.
1.
Press the Menu button to display MAIN MENU.
2.
3.
4.
Press ◄ or ► to select Maintenance, and then press the ▼ button.
Press ◄ or ► to select Spur Cleaning, and then press the ▼ button.
Press ◄ or ► to select Yes, and then press the OK button.
Maintenance 675
Cleaning the Printer
5.
Open the Paper Tray Cover (a).
6.
Squeeze the Width Guide (a) and slide it all the way to the left.
7.
Remove the Cleaning sheet from the pouch.
The pouch is used to store the Cleaning Sheet, so keep it in a safe place.
8.
Insert the long side of the Cleaning sheet in the Top Paper Feed Slot in the position to be cleaned.
Insert the Cleaning sheet gently until it stops.
676 Maintenance
Cleaning the Printer
Note
• If the width of the paper used when soiling occurred is wider than the Cleaning sheet, insert the sheet
in different positions as you perform cleaning.
9.
Press the OK button to start cleaning.
Cleaning takes about a minute and a half.
10.
Remove cleaning sheet, press OK is shown on the Control Panel. At this point, pull out the
Cleaning sheet and press the OK button.
11.
12.
Put the Cleaning Sheet back in the pouch.
Close the Paper Tray Cover.
Maintenance 677
Cleaning the Printer
Cleaning the Printhead
Cleaning the Printhead may help clear nozzles that are clogged.
Note
• You can perform automatic nozzle checking and cleaning every time you nish printing that quantity by
specifying a number of pages in the printer’s Nozzle Check menu. (→P.47)
• You can start Head Cleaning A by holding down the Information button for three seconds or more.
• If POP Board (paper thickness 1.5 mm [0.06 in]) is loaded in Front Paper Feed Slot, printhead cleaning
will not work correctly. Remove the paper before cleaning.
Cleaning the Printhead
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Head Cleaning, and then press ▼.
MAIN MENU
Head Cleaning ↓
3.
Press ◄ or ► to select the type of cleaning, and then press the OK button.
• Head Cleaning A
Use Head Cleaning A if printing is faint or contains foreign substances. This method of cleaning
consumes the least amount of ink. It takes about four minutes to complete.
• Head Cleaning B
Use Head Cleaning A if no ink comes out of the printhead, or if Head Cleaning B does not solve the
problem. It takes about six minutes to complete.
The setting is updated, and an equals sign “=” is displayed at left.
Head Cleaning
= Head Cleaning A
The printhead cleaning is nished, and the printer goes online.
4.
Print a test pattern to check the nozzles, and determine whether cleaning has cleared the
nozzles. (→P.651)
Note
• If printing does not improve after Head Cleaning A, try Head Cleaning B. If this does not solve
the problem, repeat Head Cleaning B two or three times. If this still does not improve printing, the
Printhead may have reached the end of its useful life. Contact your Canon dealer.
678 Maintenance
Other Maintenance
Other Maintenance
Preparing to Transfer the Printer
To protect the internal parts in transit, always follow the steps below before transferring the printer to a new
location. Refer to the Quick Start Guide for details on packing the printer and installing it after transfer.
Note
• You cannot prepare to transfer the printer if MTCart Full Soon or Maint Cartridge / Replace Cart
is shown on the Display Screen. Replace the Maintenance Cartridge before transfer preparations.
(→P.661)
• Do not tilt the printer in transit. Ink inside the printer may leak and cause stains. If it is necessary to
stand the printer up or tilt it, contact your Canon dealer.
1.
Remove the paper.
• Cassette
Removing Paper from the Cassette (→P.171)
• Rolls
1. Removing Roll from the Roll Feed Unit (→P.122)
2. Removing Rolls From the Roll Holder (→P.117)
• Sheet
Removing Heavyweight Paper from the Front Paper Feed Slot (→P.196)
2.
Press the Menu button to display MAIN MENU.
3.
Press ◄ or ► to select Maintenance, and then press ▼.
MAIN MENU
Maintenance ↓
4.
Press ◄ or ► to select Move Printer, and then press ▼.
Maintenance
Move Printer ↓
Maintenance 679
Other Maintenance
5.
Press ◄ or ► to select Yes, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Move Printer
= Yes
Ink Draining.. is shown on the Display Screen.
Move Printer
Ink Draining..
Open InkTankCvr is shown on the Display Screen.
Move Printer
Open InkTankCvr
6.
Open the Ink Tank Cover.
Remove Ink Tank is shown on the Display Screen.
Move Printer
Remove Ink Tank
680 Maintenance
Other Maintenance
7.
Open the Ink Tank Lock Lever and remove every Ink Tank.
Put the Ink Tank in a plastic bag and seal it.
Note
• Store the Ink Tank you removed with the ink holes (a) facing up. Otherwise, ink may leak and
cause stains.
8.
Close every Ink Tank Lock Lever, and close the Ink Tank Cover.
After Please Wait.. is shown on the Display Screen, Ink Draining.. is displayed as ink in the
printer tubes is absorbed.
Maintenance 681
Other Maintenance
9.
After Completed! Turn Power Off!! is shown on the Display Screen, turn off the printer.
Completed!
Turn Power Off!!
Important
• Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and
transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the Ink Tanks,
wait until the printer comes online, and follow this procedure again.
10.
11.
Disconnect the power cord and interface cable.
12.
Grasp the Belt, insert it between the Belt Stopper, and afx the Belt Stopper to the Carriage Shaft.
Open the Top Cover.
682 Maintenance
Other Maintenance
Important
• Do not touch the Linear Scale (a) or Carriage Shaft (b).
Note
• Here, the Belt Stopper is the one that was removed and stored after initial installation.
13.
Close the Top Cover.
14.
15.
Tape down printer covers to secure them, in the reverse order of tape removal during installation.
Grasp the handle (a) on the front of the Cassette and pull it forward a little. Holding the Cassette
on both sides with both hands, remove the cassette.
Maintenance 683
Other Maintenance
16.
Holding the Output Tray on both sides by the far end, press the button to release the lock,
and then remove the tray.
17.
Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package
them in a shipping box.
684 Maintenance
Other Maintenance
Updating the Firmware
Update the printer rmware to take advantage of new and improved printer functions.
Conrming the rmware version
1.
Press the Menu button to display MAIN MENU.
2.
Select Information → Version.
The rmware version is displayed.
Updating the rmware
To obtain the latest rmware, visit the Canon website. If the rmware available online is newer than the
installed rmware, update the printer rmware. For details on downloading and updating the rmware,
visit the Canon website.
Maintenance 685
Frequently Asked Questions
Troubleshooting
Frequently Asked Questions
Frequently Asked Questions
This section presents frequently asked questions and answers. To view more detailed explanations, click the
hyperlinks in the answer column.
Question
Answer
How do I print on a roll?
When printing on rolls, after loading the roll, specify
the paper type and length, both on the Control Panel
and in the printer driver.
⇒Loading and Printing on Rolls (→P.82)
How do I print manually?
When printing manually, specify the paper type and
size in the printer driver, and then load the paper.
⇒Loading and Printing on Sheets in the Paper Feed
Slot (→P.86)
How do I print on sheets in the cassette?
When printing from the cassette, load the paper, and
then complete the printer driver settings for the paper
type and size.
⇒Loading and Printing on Sheets in the Cassette
(→P.80)
How do I switch between printing on a roll and
printing manually?
You can switch between manual and auto paper feed
methods by pressing the Feeder Selection button.
⇒Selecting the Roll as the Paper Source (→P.114)
⇒Selecting the Tray as the Paper Source (→P.155)
⇒Selecting the Cassette as the Paper Source
(→P.154)
How do I change the paper type or size?
Specify the type and size of paper, both on the
Control Panel and in the printer driver.
• Specifying it in the Printer Driver
⇒Specifying Paper in the Printer Driver (→P.688)
• Specifying it on the Control Panel
Selecting the paper type
⇒Selecting the Paper Type (Roll) (→P.124)
⇒Selecting the Paper Type (Tray) (→P.168)
⇒Selecting the Paper Type (Cassette) (→P.167)
Selecting the Paper Size
⇒Specifying the Paper Length (Roll) (→P.125)
⇒Selecting the Paper Size (Tray) (→P.193)
⇒Selecting the Paper Size (Cassette) (→P.170)
How do I cut the roll paper after printing?
You can wait until ink dries before cutting the roll, and
you can cut rolls at a desired position.
⇒Specifying the Cutting Method for Rolls (→P.130)
686 Troubleshooting
Frequently Asked Questions
Question
Answer
How do I print without borders?
Borderless printing is possible on rolls. You can also
specify borderless printing in the printer driver by
adjusting the original size to match the paper size.
Borderless printing is not supported on sheets.
⇒Borderless Printing on Paper of Equivalent Size
(→P.325)
⇒Borderless Printing by Resizing Originals to Fit the
Roll Width (→P.327)
⇒Borderless Printing at Actual Size (→P.307)
How do I print an A4 original enlarged on A2 paper?
In the printer driver, you can adjust the original image
to match the paper size or width, or you can specify
enlargement or reduction before printing as desired.
⇒Resizing Originals to Match the Paper Size
(→P.273)
⇒Resizing Originals to Fit the Roll Width (→P.274)
⇒Resizing Originals by Entering a Scaling Value
(→P.275)
How do I print without wasting paper?
To conserve paper, you can specify in the printer
driver to rotate originals 90 degrees or to print without
top and bottom margins.
⇒Conserving Roll Paper by Rotating Originals 90
Degrees (→P.422)
⇒Conserving Roll Paper by Printing Originals
Without Top and Bottom Margins (→P.423)
How do I print without wasting all the blank space
on the right side when printing an A4-sized original
at A3 size?
By specifying to rotate originals 90 degrees in the
printer driver, you can print at A4 size to ll the width
of A3 paper.
⇒Conserving Roll Paper by Rotating Originals 90
Degrees (→P.422)
How do I print in landscape (or portrait) orientation?
You can print originals that are in landscape (or
portrait) orientation automatically enlarged to t the
roll width. This is an easy way to create vertical or
horizontal banners.
⇒Printing Vertical or Horizontal Banners
(Large-Format Printing) (→P.358)
How do I print on a custom paper size?
You can specify custom sizes temporarily in the
printer driver.
⇒Printing on Non-Standard Paper Sizes (→P.359)
How do I register custom paper sizes?
You can add desired sizes (Custom Media Sizes) in
the Size Options dialog box of the printer driver.
⇒Printing on Non-Standard Paper Sizes (→P.359)
How do I print lines thicker?
By specifying Thicken Fine Lines in the printer
driver, you can print ne lines thicker to make them
easier to see.
⇒Giving Priority to Particular Graphic Elements and
Colors for Printing (→P.203)
Troubleshooting 687
Frequently Asked Questions
Answer
Question
How do I modify how colors are printed?
To compensate for changes in color from individual
variation among Printheads or from the printing
environment and to ensure better color consistency,
execute color calibration.
⇒Using Color Calibration to Adjust Colors (→P.628)
You can adjust colors even further in the printer driver
before printing.
⇒Adjusting the Color in the Printer Driver (→P.214)
How do I use printer driver settings again in
subsequent jobs?
By saving settings information in a favorite, you can
apply the settings again before printing anytime as
needed.
⇒Using Favorites (→P.447)
Can I use the printer in combination with a Color
imageRUNNER ?
The printer can be used for automatic enlargement
and printing of scanned originals from a Color
imageRUNNER .
⇒Printing Enlargements of Scanned Originals from
a Color imageRUNNER (→P.276)
How do I print enlargements of scanned originals
from a Color imageRUNNER ?
By using Color imageRUNNER Enlargement Copy
(iR enlargement copy), you can automatically print
enlargements of scanned originals from a Color
imageRUNNER .
⇒Printing Enlargements of Scanned Originals from
a Color imageRUNNER (→P.276)
Specifying Paper in the Printer Driver
If you replace the paper, complete the printer driver settings for the paper type and size.
For instructions on conguring paper settings in the printer driver, refer to the following topics, as appropriate
for your computer and operating system.
• Specifying Paper in the Printer Driver (Windows) (→P.94)
• Specifying Paper in the Printer Driver (Mac OS X) (→P.96)
• Specifying Paper in the Printer Driver (Mac OS 9) (→P.98)
688 Troubleshooting
Printing does not start
Printing does not start
The Data lamp on the Control Panel does not light up
Cause
Corrective Action
The printer is not on.
Make sure the power cord is securely plugged in, all the way. Press the
Power button to turn the printer on.
The printer is not selected in the
printer driver. (The printer is in
Sleep mode.)
In Windows, select the printer by clicking Select Printer or Printer in
the printing dialog box and try printing again.
In Mac OS X, select the printer by clicking Printer Setup Utility (or
Print Center ) and try printing again.
In Mac OS 9, select the printer in Chooser and try printing again.
The print job is paused. (The
printer is in Sleep mode.)
In Windows, restart the print job as follows.
1. Select the printer icon in the Printers and Faxes (or Printers )
window.
2. Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1. Open the Printer Setup Utility (or the Print Center ).
2. Select the printer, and then Start Jobs in the Printers menu to
restart the print job.
In Mac OS 9, restart the print job as follows.
1. Open imagePROGRAF Printmonitor .
2. Choose Resume Printing in the File menu to restart the print job.
The Printer Does Not Respond Even if Print Jobs are Sent
Cause
Corrective Action
The printer is ofine.
Press the Online button on the Control Panel to bring the printer online.
The Display Screen indicates the system is lling with ink
Cause
When the printer was turned off previously, some
cleaning operation was terminated.
Corrective Action
Wait until the system has been lled with ink. This
process may take about ten minutes.
Troubleshooting 689
Cannot print over a network
Cannot print over a network
Cannot connect the printer to the network
Cause
Corrective Action
The Ethernet cable is not connected
correctly to the printer’s Ethernet port.
1. Make sure the printer is connected to the network with the correct
Ethernet cable, and then turn the printer on. For instructions on
connecting the cable, refer to the Quick Start Guide .
2. Make sure the Link indicator is lit.
The Link indicator is green if the printer is connected via 100
Base-TX and orange if connected via 10Base-T.
If the Link indicator is not lit, check the following points.
• Make sure the hub is on.
• Make sure the end of the Ethernet cable is connected
correctly.
Insert the Ethernet cable until it clicks and locks in place.
• Make sure there is no problem with the Ethernet cable.
If there is any problem, replace the Ethernet cable.
• Check the communication mode with the hub.
Although the printer normally detects the hub
communication mode and transmission rate automatically
(in auto negotiation mode), sometimes the hub settings
cannot be detected. In this case, congure the connection
method manually, specifying the communication mode in
use. (→P.691)
690 Troubleshooting
Cannot print over a network
Conguring the Communication Mode Manually
This topic gives instructions for conguring the communication mode manually.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Interface Setup, and then press ▼.
MAIN MENU
Interface Setup ↓
3.
Press ◄ or ► to select Ethernet Driver, and then press ▼.
Interface Setup
Ethernet Driver ↓
4.
Press ◄ or ► to select Auto Detect, and then press ▼.
Ethernet Driver
Auto Detect ↓
5.
Press ◄ or ► to select Off, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Auto Detect
= Off
Return to the Ethernet Driver menu.
6.
Press ◄ or ► to select Comm.Mode, and then press ▼.
Ethernet Driver
Comm.Mode ↓
7.
Press ◄ or ► to select the communication mode, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Comm.Mode
= Half Duplex
Return to the Ethernet Driver menu.
Troubleshooting 691
Cannot print over a network
8.
Press ◄ or ► to select Ethernet Type, and then press ▼.
Ethernet Driver
Ethernet Type ↓
9.
Press ◄ or ► to select the Ethernet type, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Ethernet Type
= 10 Base-T
Return to the Ethernet Driver menu.
10.
Press ◄ or ► to select Spanning Tree, and then press ▼.
Ethernet Driver
Spanning Tree ↓
11.
Press ◄ or ► to enable or disable spanning tree support, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Spanning Tree
= Use
Return to the Ethernet Driver menu.
12.
Press the Online button.
After the conrmation message is displayed, press OK.
The printer will now restart.
Note
• If an error message is displayed, check the settings and correct any invalid values.
• To cancel the setup process, hold down the Stop/Eject button for a second or more.
692 Troubleshooting
Cannot print over a network
Cannot print over a TCP/IP network
Cause
Corrective Action
The printer’s IP address is not congured correctly.
Make sure the printer’s IP address is congured
correctly. For details, see “Conguring the IP
Address Using imagePROGRAF Device Setup
Utility”. (→P.495) or see “Conguring the IP Address
Using the Printer Control Panel”. (→P.575)
The printer’s TCP/IP network settings are not
congured correctly.
Make sure the printer’s TCP/IP network settings are
congured correctly. For details, see “Conguring the
Printer’s TCP/IP Network Settings”. (→P.573)
The computer you are trying to print from is not
congured correctly.
Make sure the computer’s TCP/IP network settings
are congured correctly. For details, see “Conguring
the Printer Driver Destination (Windows)”. (→P.593)
Troubleshooting 693
Cannot print over a network
Cannot print over AppleTalk or Bonjour networks
Cause
Corrective Action
The AppleTalk protocol is not enabled on the printer.
Activate AppleTalk on the printer. For details,
see “Conguring the Printer’s AppleTalk Network
Settings”. (→P.598)
The computer you are trying to print from is not
congured correctly.
Make sure the computer’s AppleTalk settings are
congured correctly. For details, see “Conguring
the Destination for AppleTalk Network (Macintosh)”.
(→P.600) or see “Conguring the Destination for
Bonjour Network (Macintosh)”. (→P.608)
The computer and printer are not on the same
network.
Due to the nature of Bonjour, you cannot print if
the printer is on another network behind a router.
Make sure the computer and printer are on the same
network. For information about network settings, ask
your network administrator.
694 Troubleshooting
Cannot print over a network
Cannot print over a NetWare network
Cause
Corrective Action
The printer’s NetWare settings are not congured
correctly.
Make sure the printer’s NetWare settings are
congured correctly. In particular, make sure a valid
frame type is selected. For details, see “Conguring
the Printer’s NetWare Network Settings”. (→P.582)
The computer you are trying to print from is not
congured correctly.
Make sure the computer’s NetWare settings are
congured correctly. For details, see “Conguring
NetWare Network Settings”. (→P.592)
The NetWare server and services are not congured Check the following points.
correctly.
1. Make sure the NetWare le server is running.
2. Make sure there is enough free disk space on the
NetWare le server. Insufcient disk space may
prevent you from processing large print jobs.
3. Start NWADMIN or PCONSOLE and conrm that
the print service is congured correctly and the
print queue is available.
4. If data transmission to a printer on another subnet
fails, deactivate NCP burst mode in that printer’s
network protocol settings.
5. If the printer is used in queue server mode, specify
“Other/Unknown” as the printer type.
Troubleshooting 695
The printer stops during a print job
The printer stops during a print job
An error message is shown on the Display Screen
Status
Corrective Action
An error message is displayed during printing.
Check the error message and take action as
necessary.
(→P.731)
The last portion of roll paper was used during a print
job, and paper could not be fed because the trailing
edge was taped to the roll.
Remove the portion of roll paper that was used and
insert a new roll.
(→P.122)
(→P.117)
(→P.82)
The printer ejects blank, unprinted paper
Status
Corrective Action
The leading edge of the roll paper was cut to
straighten it.
This operation is normal.
The printer cuts the leading edge of the roll to
straighten it and ejects the scraps when Trim
Edge First in the printer menu is On or when Trim
Edge First is Automatic and the leading edge is
slanted. The printer is ready to print after this initial
preparation.
When Off is selected under Trim Edge First , the
edge is not cut and scraps are not removed.
The Printhead nozzles are clogged.
Print a test pattern to check the nozzles and make
sure the Printhead is in good condition for printing.
(→P.651)
Clean the Printhead if the nozzles are clogged.
(→P.652)
There is little ink left.
Check the ink level and replace the Ink Tank that is
low.
(→P.642)
A print job was received from an incompatible printer Use the correct imagePROGRAF printer driver for
driver.
the printer and try printing again.
The printer is damaged.
696 Troubleshooting
Contact your Canon dealer for assistance.
Problems with the printing quality
Problems with the printing quality
Printing is faint
Cause
Corrective Action
You may be printing on the wrong side of the paper.
Print on the printing surface.
The Printhead nozzles are clogged.
Print a test pattern to check the nozzles and see if
they are clogged.
(→P.651)
Because the printer was left without Ink Tanks
installed for some time, ink has become clogged in
the ink supply system.
After the Ink Tank has been installed for 24 hours,
run Head Cleaning B .
(→P.652)
Paper is jammed inside the Top Cover .
Follow the steps below to remove the jammed piece
of paper inside the Top Cover .
1. Press the Online button to bring the printer ofine.
2. Open the Top Cover and make sure the Carriage
is not over the Platen .
3. Remove any scraps of paper inside the Top Cover
.
4. Close the Top Cover .
For tips on clearing paper jams, refer to the following
topics.
• Clearing Jammed Paper from the Cassette
(→P.173)
• Clearing Jammed Roll Paper (→P.138)
• Clearing Jammed Paper from the Tray (→P.179)
During borderless printing, the ink was not dry
enough before cutting.
Specify a longer drying period in the printer menu, in
Roll DryingTime in Med.Detail Set. .
(→P.47)
Printing may be faint if Print Quality in Advanced
Settings in the printer driver is set to Standard or
Draft .
In Advanced Settings in the printer driver, choose
Highest or High in Print Quality .
(→P.203)
Troubleshooting 697
Problems with the printing quality
Paper rubs against the Printhead
Cause
The paper type as specied on the printer does not
match the type specied in the printer driver. (*1)
Corrective Action
Make sure the same paper type is specied on the
printer as in the printer driver.
(→P.167)
(→P.124)
(→P.168)
Make sure the same paper type is specied in the
printer driver as on the printer.
1. Hold down the Stop/Eject button for a second or
more to cancel printing.
2. Change the paper type in the printer driver and
try printing again.
Paper has been loaded incorrectly, causing it to
wrinkle.
Reload the paper.
(→P.156)
(→P.118)
(→P.159)
The Printhead is set too low.
In Head Height , choose Automatic . (→P.614)
You are printing on heavyweight paper or paper that
curls or wrinkles easily after absorbing ink.
When printing on Heavyweight Coated Paper or
other paper-based media, choose a VacuumStrngth
setting of Strong , or Strongest . If the paper is still
scratched, try setting the Printhead level in Head
Height to High . (→P.623) (→P.614)
When printing on CAD Tracing Paper or lm-based
media, choose a VacuumStrngth setting of
Standard , Strong , or Strongest . If the paper is
still scratched, try setting the Printhead level in Head
Height to High . (→P.623) (→P.614)
When printing on paper 0.1 mm (0.004 in) thin
or thinner, choose a VacuumStrngth setting of
Weakest . If the paper is still scratched, try setting the
Printhead level in Head Height to High . (→P.623)
(→P.614)
If edges of the paper curl and become soiled when
printing on rolls of glossy photo paper, in Media
Detailed Settings in the printer driver, set Near End
Margin to 20mm .
*1: Always make sure the loaded paper matches the media type setting on the printer.
698 Troubleshooting
Problems with the printing quality
The edges of the paper are dirty
Cause
Corrective Action
The Platen has become dirty after borderless printing Open the Top Cover and clean the Platen .
or printing on small paper.
(→P.670)
The paper type as specied on the printer does not
match the type specied in the printer driver.
Make sure the same paper type is specied on the
printer as in the printer driver.
(→P.167)
(→P.124)
(→P.168)
Make sure the same paper type is specied in the
printer driver as on the printer.
1. Hold down the Stop/Eject button for a second or
more to cancel printing.
2. Change the paper type in the printer driver and
try printing again.
The paper is wrinkled or warped.
Straighten out the wrinkles or curls and reload the
paper. Do not use paper that has been printed on
previously.
(→P.156)
(→P.118)
(→P.159)
A cut line is printed because the function to reduce
cutting dust has been activated.
If this function is not needed, deactivate
CutDustReduct. through the printer menu.
(→P.47)
The Printhead is set too low.
In Head Height , choose Automatic . (→P.614)
You are printing on heavyweight paper or paper that
curls or wrinkles easily after absorbing ink.
When printing on Heavyweight Coated Paper or
other paper-based media, choose a VacuumStrngth
setting of Strong or Strongest . If the paper is still
scratched, try setting the Printhead level in Head
Height to High . (→P.623) (→P.614)
When printing on CAD Tracing Paper or lm-based
media, choose a VacuumStrngth setting of
Standard , Strong , or Strongest . If the paper is
still scratched, try setting the Printhead level in Head
Height to High . (→P.623) (→P.614)
If edges of the paper curl and become soiled when
printing on rolls of glossy photo paper, in Media
Detailed Settings in the printer driver, set Near End
Margin to 20mm .
The Output Tray is soiled.
Clean the Output Tray . (→P.669)
Troubleshooting 699
Problems with the printing quality
The surface of the paper is dirty
Cause
Corrective Action
The Paper Retainer is soiled.
Clean the Paper Retainer . (→P.673)
You are using a paper that does not dry easily.
Specify a time of about a minute in Roll DryingTime .
The back side of the paper is dirty
Cause
Corrective Action
The Platen has become dirty after borderless printing Open the Top Cover and clean the Platen .
or printing on small paper.
(→P.670)
The Paper Retainer is soiled.
Clean the Paper Retainer . (→P.673)
Banding in different colors occurs
Cause
Corrective Action
The roll is not loaded correctly in the Roll Feed Unit.
Remove the roll and reload it.
(→P.118)
The paper feed amount is not adjusted correctly.
Adjust the feed amount.
(→P.615)
Printing does not proceed smoothly because print
jobs are interrupted during transmission.
Exit other applications and cancel other print jobs.
In the printer menu, Print Length is specied in
Feed Priority .
To adjust the feed amount, specify Band Joint in
Feed Priority in the printer menu.
(→P.615)
The Printhead is out of alignment.
Adjust the Printhead alignment.
(→P.610)
Streaks may occur if you set the Print Quality too
low.
Choose a higher level of Print Quality in the
Advanced Settings of the printer driver and try
printing again.
(→P.203)
The contrast becomes uneven during printing
Cause
The paper feed amount is out of adjustment.
700 Troubleshooting
Corrective Action
Execute Adjust Band during printing.
(→P.615)
Problems with the printing quality
Colors in printed images are uneven
Cause
Corrective Action
Line Drawing/Text is selected when printing images Specify Image in the printer driver.
in many solid colors.
You are printing on paper that curls easily.
Printed colors may appear uneven on the leading
edge of paper that is susceptible to curling. Increase
the level of vacuum holding the paper against the
Platen or specify a margin of 20 mm (0.79 in) or more
for the leading edge. (→P.623)
If you use Glossy Paper , art paper or Coated Paper In Advanced Settings of the printer driver, choose
, color shading may appear at the rear edges of the Highest or High in Print Quality .
paper.
(→P.203)
Printed colors may be uneven if you set the Print
Quality too low.
Choose a higher level of Print Quality in the
Advanced Settings of the printer driver.
(→P.203)
Color may be uneven between dark and light image
areas.
Select Unidirectional Printing in the Advanced
Settings of the printer driver.
When using Borderless Printing, the edge of the
paper is cut during printing. Thus, ink density may
not be even at the edges.
Specify No in Auto Cut in the printer driver before
printing. In this case, the paper can be printed without
borders on the left and right sides only. Cut the
printed document ejected from the printer, then use
scissors to cut away the edges on the top and bottom.
Choose a higher level of Print Quality in the
Advanced Settings of the printer driver.
(→P.203)
The Printhead is out of alignment.
Adjust the Printhead alignment.
(→P.610)
Drying documents stacked on each other may cause To avoid uneven colors, we recommend drying each
uneven colors.
sheet separately.
Troubleshooting 701
Problems with the printing quality
Problems with the printing quality caused by the type
of paper
For paper-specic troubleshooting tips to improve the printing quality, refer to the Paper Reference Guide.
(→P.107)
Lines are misaligned
Cause
The Printhead alignment is not adjusted.
Corrective Action
Adjust the Printhead alignment.
(→P.610)
(→P.612)
The length of printed images is inaccurate
Cause
Corrective Action
In the printer menu, Band Joint is specied in Feed
Priority .
To ensure the feed amount matches the paper size,
select Print Length in Feed Priority in the printer
menu and enter the amount for adjustment in Adjust
Length . You can adjust the feed amount in 0.02%
increments. (→P.47)
Documents are printed in monochrome
Cause
Corrective Action
In the Advanced Settings of the printer driver,
In the Advanced Settings of the printer driver,
Monochrome or Monochrome (Photo) , is specied specify Color in Color Mode and try printing again.
in Color Mode .
The Printhead nozzles are clogged.
702 Troubleshooting
Print a test pattern to check the color ink nozzles and
see if they are clogged.
(→P.651)
Problems with the printing quality
Printed colors are inaccurate
Cause
Corrective Action
Color adjustment has not been activated in the
Advanced Settings of the printer driver.
In the Advanced Settings of the printer driver,
access Color Settings in Color Mode to adjust
colors.
Colors have not been adjusted on the computer or
monitor.
Refer to the computer and monitor documentation
to adjust the colors.
Adjust the settings of the color management software,
referring to the software documentation as needed.
The Printhead nozzles are clogged.
Print a test pattern to check the nozzles and see if
they are clogged.
(→P.651)
In the printer driver, Application Color Matching
Priority is not selected.
Click Special Settings on the Layout sheet of the
printer driver and select Application Color Matching
Priority in the dialog box.
There may be a slight difference in how colors are
printed after you replace the Printhead because of
individual variation among Printheads .
Execute color calibration.
Printhead characteristics gradually change through
repeated use, and colors may change.
Execute color calibration.
Color may change slightly even on the same model Follow these steps to prepare the printing
of printer if you use a different version of the rmware environment.
or printer driver, or when you print under different
1. Use the same version of rmware or printer driver.
settings or in a different printing environment.
2. Specify the same value for all settings items.
3. Execute color calibration.
The region selection of the Media Conguration Tool Perform color calibration again using paper supported
was changed when you reinstalled the printer driver. in the newly selected region and compatible with
If you change the region selection of the Media
color calibration.
Conguration Tool , region-specic paper information
originally registered on the printer before installation
will be deleted. If the information of paper you used
for color calibration is deleted, such color calibration
can no longer be applied to any type of paper.
Troubleshooting 703
Problems with the printing quality
Image Edges are Blurred or White Banding Occurs
Cause
Corrective Action
The Platen suction is too strong.
Set VacuumStrngth to Weakest . (→P.623)
The Printhead is set too high.
Lower the Printhead . (→P.614)
Documents are printed crooked
Cause
Skew Skew Check Lv. has been set to Loose or
Off .
Corrective Action
Choose Standard in Skew Check Lv. . If strict skew
detection is required, choose High Accuracy in
Skew Check Lv. .
White dots about 1 mm (0.039 in) apart appear on printed
documents, in the direction paper is fed.
Cause
Corrective Action
The media type setting is incorrect.
After you select the correct media type, clean the
parts used in paper feeding (spurs).
(→P.167)
(→P.168)
(→P.124)
Parts used in paper feeding (spurs) are soiled.
Clean the Spurs.
(→P.675)
Fine Scratches Appear on Glossy Paper from the
Cassette
Cause
Corrective Action
When glossy paper is fed from the cassette, paper
It may help prevent scratches from the paper path if
dust or other debris on the guides or in the paper path you print glossy paper from the Top Paper Feed Slot
that turns paper around may damage the surface of instead. (→P.86)
glossy paper.
704 Troubleshooting
Problems with the printing quality
Immediately After Borderless Printing, the Trailing Edge
Margin is Soiled During Regular Printing
Cause
Corrective Action
Depending on your printing environment, after
Follow these steps to set the Between Pages setting
borderless printing in which the leading and trailing
of Drying Time in a range of 30 seconds to 3 minutes
edge of the roll is cut automatically, any ink adhering before borderless printing.
to the cutter unit may rub off on the next printed
1. On the Main sheet of the printer driver, click
document.
Settings in Media Type .
2. Select the ink drying time in the Between Pages
list of Drying Time .
Roller marks are left across the trailing edge of paper
Cause
Corrective Action
A document was removed after printing from the
Following the instructions, press the ▲ button,
Front Paper Feed Slot without pressing the ▲ button. remove the paper, and then press the ▼ button.
Wipe away any soiling on the rollers. (→P.670)
(→P.673)
Line thickness is not uniform (Windows)
Cause
In the Special Settings dialog box of the Windows
printer driver, Fast Graphic Process is selected.
Corrective Action
Open the printer driver’s Properties dialog box from
Print in the application software’s File menu, and try
printing following the steps below.
1. Remove the check from Open Preview When
Print Job Starts in the Main sheet.
2. Remove the check from Page Layout in the
Layout sheet.
3. Click the Special Settings button in the Layout
sheet to open the Special Settings dialog
box, and remove the check from Fast Graphic
Process .
Troubleshooting 705
Installation problems
Installation problems
The IEEE 1394 Driver Cannot Be Installed Correctly
In Windows, the device interface driver may not be installed correctly in some cases if you connected the
IEEE 1394 cable before installing the printer driver.
If so, reinstall the IEEE 1394 device interface driver and the printer driver as follows.
Important
• This procedure is based on an example for Windows XP. The name of the wizard may be different
in other operating systems.
1.
2.
3.
4.
Right-click My Computer and choose Properties to display the System Properties window.
On the Hardware sheet, click Device Manager to display the Device Manager window.
Right-click Other Devices icon and choose Properties.
On the Driver sheet, click Update Driver to start the Hardware Update Wizard (or the Upgrade
Device Driver Wizard.)
5.
6.
Follow the instructions on the screen.
When the window is displayed to choose the source for driver installation, select the CD-ROM
drive. Insert the User Software CD-ROM provided with the printer and follow the instructions
on the screen.
The device/interface driver is installed.
The device is detected, and the New Hardware Wizard (or Add New Hardware Wizard )
is started.
7.
8.
Follow the instructions on the screen.
When the window is displayed to choose the source for driver installation, select the printer
driver folder.
Choose the CD-ROM drive > Driver > WinXP_2K > Driver, and click OK. (For Windows
2000/Windows XP/Windows Server 2003)
9.
Follow the instructions on the screen.
The printer driver is installed.
706 Troubleshooting
Installation problems
Removing Installed Printer Drivers
Follow the steps below to remove installed printer drivers and utilities.
Removing printer drivers (Windows)
Remove the printer driver as follows.
Note
• In Windows 2000/Windows XP/Windows Server 2003/Windows Vista, you must log on with
administrative rights such as “Administrator” account.
1.
From the Windows start menu, select Programs > Canon Printer Uninstaller >
imagePROGRAF Printer Driver Uninstaller to display the Delete Printer window.
2.
3.
4.
Select the printer in the list and click Delete.
Click Yes in the Warning message dialog box.
Make sure that the printer has been removed from the list, and click Exit.
Removing Printer Drivers and imagePROGRAF Printmonitor
(Macintosh)
Remove the printer driver or imagePROGRAF Printmonitor as follows.
1.
2.
Insert the User Software CD-ROM provided with the printer in the CD-ROM drive.
Start the printer driver installer included in the User Software CD-ROM.
For Mac OS X, open OS X and double-click iPF Driver Installer X.
For Mac OS 9, open OS 9 and double-click iPF Driver Installer 9.
3.
4.
In the upper-left menu, choose Uninstall, and click Uninstall.
Follow the instructions on the screen to remove the printer driver or imagePROGRAF
Printmonitor.
Removing imagePROGRAF Status Monitor (Windows)
Remove imagePROGRAF Status Monitor as follows.
1.
From the Windows start menu, select Programs > imagePROGRAF Status Monitor >
Uninstaller (imagePROGRAF Status Monitor) to start the wizard.
2.
3.
In the wizard window, click Delete, and then click Next.
Follow the instructions on the screen to remove imagePROGRAF Status Monitor.
Removing imagePROGRAF Device Setup Utility (Windows)
Remove imagePROGRAF Device Setup Utility as follows.
1.
From the Windows start menu, select Programs > imagePROGRAF Device Setup Utility >
Uninstaller (imagePROGRAF Device Setup Utility) to start the wizard.
2.
3.
In the wizard window, click Delete, and then click Next.
Follow the instructions on the screen to remove imagePROGRAF Device Setup Utility.
Troubleshooting 707
Clearing jammed paper
Clearing jammed paper
Clearing Jammed Roll Paper
If paper from a roll becomes jammed, Paper Jam / Press ↑ Key is shown on the Display Screen of the
Control Panel. Remove the jammed paper as follows.
Note
• For instructions on removing a paper jam from a roll if the scrap of paper remains in the Paper Feed
Slot, see “Clearing Jammed Paper (Paper Feed Slot)”. (→P.142)
1.
Open the Roll Paper Unit Cover. Use a store-bought cutter or the like to cut the paper of the
loaded roll.
Caution
• When cutting paper, be careful to avoid scratching the printer.
2.
Press ▲ button.
708 Troubleshooting
Clearing jammed paper
3.
Remove the jammed paper.
• If paper is jammed inside the Top Cover
1. Open the Top Cover and move the Carriage to the side.
2. Clear any jammed paper from inside the Top Cover.
After removing the paper, make sure there are no other scraps of paper in the printer.
3. Close the Top Cover.
Important
• Do not touch the Linear Scale (a) or Carriage Shaft (b).
Troubleshooting 709
Clearing jammed paper
• If paper from a roll is jammed by the Paper Feed Slot
1. Open the Roll Paper Unit Cover.
2. Remove the jammed paper from the Paper Feed Slot.
After removing the paper, make sure there are no other scraps of paper in the printer. If paper
is jammed deep in the Paper Feed Slot (→P.711), remove the Roll Feed Unit and clear the
paper jam.
• If the paper is jammed by the Output Tray
Remove the jammed paper from the Output Tray.
After removing the paper, make sure there are no other scraps of paper in the printer.
4.
Press ▼.
710 Troubleshooting
Clearing jammed paper
If paper is jammed deep in the Paper Feed Slot, remove the Roll Feed Unit and clear the paper jam as follows.
1.
2.
Turn off the printer and remove the Roll Feed Unit from the printer. (→P.147)
Remove the jammed paper from the Paper Feed Slot.
After removing the paper, make sure there are no other scraps of paper in the printer.
3.
Install the Roll Feed Unit on the printer again. (→P.148)
Troubleshooting 711
Clearing jammed paper
Clearing Jammed Paper (Paper Feed Slot)
Follow these steps to remove any scraps left in the Paper Feed Slot after you clear jammed sheets or
roll paper.
1.
2.
Press the Feeder Selection button to activate the Paper Tray lamp.
Press ◄ or ► to select POP Board, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Manual Pap.Type
= POP Board
3.
Press ◄ or ► to select ISO A2, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Manual Pap.Size
= ISO A2
A conrmation message is displayed notifying you that the printer is changing the media source.
Please Wait..
4.
After the following message is displayed, press the OK button.
Chk Back Space
Press OK
5.
After the following message is displayed, open the Top Cover.
Open UpperCover
6.
Fold an A4 sheet lengthwise four times and insert it through the gap of the Back Cover. Push the
scrap out toward the Platen.
7.
8.
9.
10.
Remove the scrap when it is pushed out onto the Platen.
If any scraps remain inside the Paper Feed Slot, repeat steps 6 and 7.
Close the Top Cover.
Turn the printer off. (→P.20)
712 Troubleshooting
Clearing jammed paper
Clearing Jammed Paper from the Tray
If a sheet loaded manually becomes jammed, Paper Jam / Press ↑ Key is shown on the Display Screen of
the Control Panel. Remove the jammed paper as follows.
1.
Press ▲.
2.
Remove the jammed paper.
• If paper is jammed inside the Top Cover
1. Open the Top Cover and move the Carriage to the side.
2. Clear any jammed paper from inside the Top Cover.
After removing the paper, make sure there are no other scraps of paper in the printer.
3. Close the Top Cover.
Troubleshooting 713
Clearing jammed paper
Important
• Do not touch the Linear Scale (a) or Carriage Shaft (b).
• If paper is jammed by the Paper Feed Slot of the Tray
Remove the jammed paper from the Paper Feed Slot.
After removing the paper, make sure there are no other scraps of paper in the printer. If paper is
jammed deep in the Paper Feed Slot (→P.716), remove the Roll Feed Unit and clear the paper jam.
714 Troubleshooting
Clearing jammed paper
• If the paper is jammed by the Output Tray Output Tray
Remove the jammed paper from the Output Tray.
After removing the paper, make sure there are no other scraps of paper in the printer.
• If paper is jammed in the back of the printer
Remove the jammed paper from the back.
After removing the paper, make sure there are no other scraps of paper in the printer.
3.
Press ▼.
Troubleshooting 715
Clearing jammed paper
If paper is jammed deep in the Paper Feed Slot, remove the Roll Feed Unit and clear the paper jam as follows.
1.
Turn off the printer and remove the Roll Feed Unit from the printer.
(→P.147)
2.
Remove the jammed paper from the Paper Feed Slot.
After removing the paper, make sure there are no other scraps of paper in the printer.
3.
Install the Roll Feed Unit on the printer.
(→P.148)
716 Troubleshooting
Clearing jammed paper
Clearing Jammed Paper from the Cassette
If paper from the Cassette becomes jammed, the following messages are shown on the Display Screen of the
Control Panel. How to clear the paper jam varies depending on the message.
• Can’t DetectPapr / Remove Paper (→P.717)
• Paper Jam / Press ↑ Key (→P.720)
If Can’t DetectPapr / Remove Paper is displayed
If paper is jammed in the paper feed slot of the cassette
1.
Grasp the handle (a) on the front of the Cassette and pull it forward a little. Holding the Cassette
on both sides with both hands, remove the cassette.
2.
Clear any jammed paper from the paper feed slot of the Cassette.
After removing the paper, make sure there are no other scraps of paper in the printer.
3.
Holding the Cassette on both sides with both hands, insert it rmly into the printer.
Troubleshooting 717
Clearing jammed paper
If paper is jammed in the back of the printer
1.
While squeezing the two levers (a) at two positions on the Back Cover, remove the Back Cover
from the printer.
2.
Remove the jammed paper from the back.
After removing the paper, make sure there are no other scraps of paper in the printer.
Caution
• Do not touch the areas in the printer indicated by (a). If the grease that coats these parts is
accidentally wiped away, it may cause feeding problems.
718 Troubleshooting
Clearing jammed paper
3.
After attaching the Back Cover, push the lower part of the levers at two positions so that the
levers are aligned with the marks on the Back Cover.
Troubleshooting 719
Clearing jammed paper
If Paper Jam / Press ↑ Key is displayed
1.
Press ▲.
2.
Remove the jammed paper.
• If paper is jammed inside the Top Cover
1. Open the Top Cover and move the Carriage to the side.
2. Clear any jammed paper from inside the Top Cover.
After removing the paper, make sure there are no other scraps of paper in the printer.
3. Close the Top Cover.
720 Troubleshooting
Clearing jammed paper
Important
• Do not touch the Linear Scale (a) or Carriage Shaft (b). This may stain your hands and damage
the printer.
• If paper is jammed in the back of the printer
1. While squeezing the two levers (a) at two positions on the Back Cover, remove the cover
from the printer.
2. Remove the jammed paper from the back.
After removing the paper, make sure there are no other scraps of paper in the printer.
Troubleshooting 721
Clearing jammed paper
3. After attaching the Back Cover, push the lower part of the levers at two positions so that the
levers are aligned with the marks on the Back Cover.
• If the paper is jammed by the Output Tray.
1. Remove the jammed paper from the Output Tray.
After removing the paper, make sure there are no other scraps of paper in the printer.
3.
Press ▼.
722 Troubleshooting
If the Printer makes a strange sound
If the Printer makes a strange sound
If the Printer Makes a Strange Sound
The following sounds do not indicate a problem with the printer.
• There is a sound of vacuum from the Platen
To prevent paper from rising, paper is held against the Platen by suction from Vacuum holes under it.
• Roll paper makes a uttering sound during printing
There may be a uttering sound when large paper is advanced.
• If you suddenly hear the tone for cleaning operations
At regular intervals, for printer maintenance, cleaning operations will begin automatically, even if the
printer is in Sleep mode.
In other cases, contact your Canon dealer.
Troubleshooting 723
Other problems
Other problems
The printer consumes a lot of ink
Cause
Corrective Action
Many full-page color images are printed.
In print jobs such as photos, images are lled with
color. This consumes a lot of ink. This does not
indicate a problem with the printer.
Head Cleaning B is used often.
Head Cleaning B consumes a lot of ink. This does
not indicate a problem with the printer. Unless the
printer has been moved or stored for a long period
or you are troubleshooting Printhead problems, we
recommend not performing Head Cleaning B , to
the extent possible.
You have just nished initial installation, when more
ink is consumed to ll the system.
After initial installation or at the rst-time use after
transfer, ink ows into the system between the Ink
Tank and Printhead , which may cause the ink level
indicators to drop to 80%. This does not indicate a
problem with the printer.
A message to check the Maintenance Cartridge is not
cleared after you replace the Maintenance Cartridge
Cause
The printer has not detected the new Maintenance
Cartridge .
Corrective Action
Remove the new Maintenance Cartridge you have
just installed and insert it again rmly.
Restart the printer.
Paper is not cut straight
Cause
Corrective Action
The paper is bent or curled at the cut position.
Straighten out any curling by the edges of the paper.
Paper rises by the ends of the cut position before
it is cut.
Reload the paper correctly.
724 Troubleshooting
Other problems
Paper cannot be cut
Cause
Corrective Action
The printed document became caught on a foreign
Remove the foreign object by the Output Tray to
object by the Output Tray , which lifted the document. enable the printer to eject the printed document,
The Cutter passed under the paper.
keeping it level.
In the printer driver, No or Print Cut Guideline is
specied in Auto Cut .
Specify Yes in Auto Cut in the printer driver.
In MAIN MENU , Eject or Manual is specied in
Cutting Mode .
Specify Automatic in Cutting Mode in MAIN MENU .
Depression on the leading edge is left
Cause
Keeping a roll in the printer for a long time without
printing on it may leave a depression on the leading
edge.
Corrective Action
When printing quality is most important, we
recommend setting TrimEdge Reload to On or
Automatic so that the paper edge is automatically
cut before printing.
Roller marks are left across the trailing edge of paper
Cause
Corrective Action
A document was removed after printing from the
Following the instructions, press the ▲ button,
Front Paper Feed Slot without pressing the ▲ button. remove the paper, and then press the ▼ button.
Wipe away any soiling on the rollers. (→P.670)
(→P.673)
The printer does not go on
Cause
Corrective Action
The printer is unplugged.
Plug the power cord into the outlet, and then turn on
the printer.
The specied voltage is not supplied.
Check the voltage of the outlet and breaker.
For information on the specied voltage, see
“Specications”. (→P.72)
Troubleshooting 725
Other problems
Roll paper cannot be inserted into the Paper Feed Slot
Cause
Corrective Action
The roll paper is warped.
Straighten out curls and reload the roll.
The roll was pulled out by force when it had been
advanced before printing, and this action closed the
Paper Feed Slot .
Hold down the Stop/Eject button for a while and
reload the roll.
Cannot load sheets in the tray
Cause
The paper source selection is incorrect.
Corrective Action
Press the Feeder Selection button to activate the
Paper Tray lamp .
The Front Tray Guides are in the Front Paper Feed Slot.
Cause
Paper cannot be ejected because the roll was
advanced when the Front Tray Guides were in the
Front Paper Feed Slot .
726 Troubleshooting
Corrective Action
On the Control Panel , momentarily select POP
Board on the screen for selection of the media type.
The Front Paper Feed Slot will rise, so lift the Vertical
Paper Guides and store them toward the front.
Other problems
Ink level detection
Ink level detection will be deactivated if you load ink tanks once emptied.
Ink level detection
Ink Tanks (→P.641) specied for this printer feature an ink level detection function to prevent the ink from
running out during printing, which prevents printer damage.
This function will not work correctly if you use rell ink tanks. As a result, printing stops. Thus, before using
rell ink tanks, you must cancel the ink level detection.
Printing with the ink level detection canceled may lead to printer damage and printing problems. Canon Inc.
is not liable for any damage that may occur as a result of relling ink.
Caution
• After ink level detection has been disabled, this function cannot be reactivated for the currently loaded
Ink Tank. To use ink level detection again, replace the Ink Tank with a new ink tank specied for use
with the printer.
• Repeatedly removing and inserting an Ink Tank may damage the connection between the Ink Tank and
the printer, which may cause ink leakage from the Ink Tank and damage the printer.
Troubleshooting 727
Other problems
Disabling Ink Level Detection
On the Display Screen, a message indicates that the ink level cannot be detected.
The remaining
level of the ↓
1.
2.
Press ▼ and check the message on the Display Screen.
Press ◄ or ► to select Information, and then press the OK button.
Please Check. ↑
= Information
A conrmation message is shown on the Display Screen about disabling ink level detection.
Tank once
emptied is ↓
3.
4.
Press ▼ and check the message on the Display Screen.
Press ◄ or ► to select Yes, and then press the OK button.
Cancel? ↑
= Yes
A conrmation message is shown on the Display Screen.
Avoid ink level
detection after↓
5.
6.
Press ▼ and check the message on the Display Screen.
Press ◄ or ► to select Yes, and then press the OK button.
Agree? ↑
= Yes
A conrmation message regarding updating ink information is shown on the Display Screen.
Avoid ink level
detection. ↓
7.
8.
Press ▼ and check the message on the Display Screen.
Press ◄ or ► to select Yes, and then press the OK button.
Agree? ↑
= Yes
Ink level detection is now disabled, and the printer goes online.
728 Troubleshooting
Responding to Messages
Error Message
Responding to Messages
Responding to Messages
Warning messages
The printer status is indicated on the top line of the Display Screen, and the warning message on the bottom
line of the Display Screen.
Although warning messages do not prevent printer operation, you should check the message and take the
appropriate action. (→P.731)
Online
Ink Lvl: Chk BK
ISO A2
Error messages (if action can be taken)
Error messages are indicated in two pages of the Display Screen if the printer operation stops until you take
some action. The pages are displayed alternately.
Check the message and take the appropriate action. (→P.731)
Maint Cartridge
Replace Cart
Error messages (if no action can be taken)
Error notication (“ERROR”) is displayed with the error code on the top line of the Display Screen, and a
message is displayed on the bottom line of the Display Screen.
ERROR Exxx-xxxx
Call For Service
Turn off the printer and wait at least three seconds before restoring the power.
If the message is still displayed after this, write down the error code and message, turn off the printer, and
contact the Canon dealer for assistance.
Error Message 729
Responding to Messages
Other Messages
These messages do not prevent printer operation. Check the information on the Display Screen and take
action as necessary. Messages requiring special attention are as follows:
Note
• Messages are also displayed in imagePROGRAF Status Monitor (Windows) or imagePROGRAF
Printmonitor (Macintosh).
730 Error Message
Responding to Messages
Error Messages
Warning messages
The printer status is indicated on the top line of the Display Screen, and the warning message on the bottom
line of the Display Screen.
Although warning messages do not prevent printer operation, you should check the message and take
the appropriate action.
•
•
•
•
•
•
•
•
•
•
GARO Wxxxx (x represents a number) (→P.759)
Ink Lvl: Chk xx (xx represents an ink color) (→P.750)
Check Printout (→P.757)
Feed Limit.. (→P.747)
Consumables Low (→P.761)
Repl Consumables (→P.761)
MTCart Full Soon (→P.758)
Paper Mismatch (→P.735)
PaprSiz Mismatch (→P.736)
PaprTyp Mismatch (→P.735)
Error messages (if action can be taken)
Check the message and take the appropriate action.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Need 10 in or Larger Roll (→P.737)
Need A4/Letter Vert. or Larger (→P.737)
Press OK and recalibrate (→P.755)
No Ink Left (→P.752)
Ink Tank / Check xx (xx represents an ink color) (→P.750)
Ink Tank / Replace xx (xx represents an ink color) (→P.752)
Top Cover / Please Close (→P.759)
Online Key / and recalibrate (→P.754)
Cassette Undetected (→P.739)
Cassette Selectd / Press ↑ Key (→P.739)
Load Papr in Cas / Press Online. (→P.739)
Calibration multi-sensor err (→P.733)
Media Check / Please Cancel (→P.739)
Paper Feed Slot / SpcfdPapr NotFit (→P.739)
Check Supported Paper. (→P.741)
Sheets Loaded / Press ↓ To Eject (→P.740)
Tray Selected (→P.740)
Power On / Again (→P.760)
Power On / Again / Multi-sensor Err (→P.761)
Not Enough Ink (→P.751)
Cannot update rmware (→P.761)
Printhead / Please Check (→P.757)
Printhead X / Replace Printhd (x is Left or Right) (→P.757)
Printhead X / Check Nozzles (x is Left or Right) (→P.756)
Maint Cartridge / Replace Cart (→P.758)
Maint Cartridge / Load Cartridge (→P.758)
Cutting Error (→P.748)
Paper Mismatch / ReplcPap:Press↓ (→P.733)
Error Message 731
Responding to Messages
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Paper Mismatch / Prnt:PressOnline (→P.733)
Can’t DetectPapr (→P.747)
Paper Too Large / Please Check (→P.734)
Paper Too Small / Please Check (→P.734)
Paper Size / Please Check (→P.737)
Papr Size Undetected (→P.746)
PaprSiz Mismatch / Prnt:PressOnline (→P.734)
PaprTyp Mismatch / Prnt:PressOnline (→P.734)
Paper Type / Please Change (→P.754)
Paper / Please Reload (→P.746)
Paper Jam / Press ↑ Key (→P.747)
Paper Loaded / Crooked (→P.744)
Paper loaded askew.(→P.733)
Remove paper (→P.742)
Paper Askew / Please Reload (→P.745)
Roll Selected / Load Roll (→P.749)
Roll Paper / Please Replace (→P.738)
Roll Paper Chk / Check Width/Spcr (→P.743)
Roll P Unit / Please Check (→P.748)
Error messages (if no action can be taken)
Error notication (“ERROR”) is displayed with the error code on the top line of the Display Screen, and a
message is displayed on the bottom line of the Display Screen.
ERROR Exxx-xxxx
Call For Service
Turn off the printer and wait at least three seconds before restoring the power.
If the message is still displayed after this, write down the error code and message, turn off the printer, and
contact the Canon dealer for assistance.
Other Messages
These messages do not prevent printer operation. Check the information on the Display Screen and take
action as necessary. Messages requiring special attention are as follows:
• Excessv Temp/Hu / Press OK/Stop (→P.755)
• The remaining level of the following ink cannot be correctly detected. (→P.753)
732 Error Message
Responding to Messages
Calibration multi-sensor err
Cause
The performance of a sensor inside the printer may
be impaired.
Corrective Action
Press the OK button and cancel calibration. Contact
your Canon dealer for assistance.
Paper loaded askew.
Cause
A sheet has been loaded askew in the Top Paper
Feed Slot .
Corrective Action
Remove the sheet and reload it straight.
Paper Mismatch / Prnt:PressOnline
Cause
The paper type and size as specied in the printer
driver do not match the type and size specied on
the printer.
Corrective Action
1. Hold down the Stop/Eject button for a second or
more to cancel printing.
2. Try printing again after adjusting the paper size
and type as specied in the printer driver and the
size and type specied on the printer so that they
match.
Press the Online button to resume printing. However,
this may cause a paper jam or printing problem.
Paper Mismatch / ReplcPap:Press↓
Cause
When using multiple sheets to print test patterns for
printer adjustment, you are using sheets of different
sizes or types of paper.
Corrective Action
Press the ▼ button to eject the sheet and load a
sheet of the same size and type as the rst sheet.
Error Message 733
Responding to Messages
Paper Too Large / Please Check
Cause
The loaded paper exceeds the maximum size
supported by the printer.
Corrective Action
Press the Online button to clear the error message.
For details on supported paper sizes, see “Paper
Sizes”. (→P.112)
Paper Too Small / Please Check
Cause
The loaded paper is smaller than the minimum size
supported by the printer.
Corrective Action
Press the Online button to clear the error message.
For details on supported paper sizes, see “Paper
Sizes”. (→P.112)
PaprSiz Mismatch / Prnt:PressOnline
Cause
Corrective Action
The sizes of paper specied in the printer driver and
on the printer do not match when Fit Roll Paper
Width is selected in the printer driver.
1. Hold down the Stop/Eject button for a second or
more to cancel printing.
2. Try printing again after adjusting the paper size
as specied in the printer driver and the size
specied on the printer so that they match.
Press the Online button to resume printing. However,
this may cause a paper jam or printing problem.
PaprTyp Mismatch / Prnt:PressOnline
Cause
The paper type as specied on the printer does not
match the type specied in the printer driver.
Corrective Action
1. Hold down the Stop/Eject button for a second or
more to cancel printing.
2. Try printing again after adjusting the paper type
as specied in the printer driver and the type
specied on the printer so that they match.
Press the Online button to resume printing. However,
this may cause a paper jam or printing problem.
734 Error Message
Messages regarding paper
Messages regarding paper
Paper Mismatch
Cause
Corrective Action
The type and size of paper as specied on the printer Adjust both settings so that they match and try
do not match the type and size specied in the printer printing again.
driver.
PaprTyp Mismatch
Cause
The paper type as specied on the printer does not
match the type specied in the printer driver.
Corrective Action
Make sure the same type of paper is specied on the
printer as in the printer driver.
(→P.82)
(→P.86)
(→P.80)
Follow these steps to ensure the paper type matches
on the printer and in the printer driver.
1. Hold down the Stop/Eject button for a second or
more to cancel printing.
2. Either change the type of paper specied in the
printer driver settings or replace the loaded paper
and change the paper type setting on the printer.
Press the Online button to resume printing.
However, this may cause a paper jam or printing
problem.
*Printing will continue if you have set Detect Mismatch to Warning or None.
Error Message 735
Messages regarding paper
PaprSiz Mismatch
Cause
Corrective Action
The paper size as specied on the If you have selected Fit Roll Paper
printer does not match the size
Width in the printer driver settings
specied in the printer driver.
and Warning in Detect Mismatch
in the printer menu:
Printing resumes after the warning
message is displayed. However,
note that this error may cause
paper jams and affect the printing
quality. Try printing again after
adjusting the paper size as
specied in the printer driver and
the size specied on the printer so
that they match.
If you have selected Fit Roll Paper Follow the steps below to ensure
Width in the printer driver settings the paper size matches on the
and Pause in Detect Mismatch in printer and in the printer driver.
the printer menu:
1. Load paper of the same size as
you have specied in the printer
driver.
2. Hold down the Stop/Eject
button for a second or more to
cancel printing.
3. Change the paper size in the
printer driver and try printing
again.
Press the Online button to resume
printing.
However, this may cause a paper
jam or printing problem.
736 Error Message
Messages regarding paper
Paper Size / Please Check
Paper Too Small / Press ↑ Key
Cause
Corrective Action
Paper that is too small for the printer has been
loaded.
Load paper of the correct size.
(→P.112)
Paper has been loaded that is too small to print
the test pattern for printhead adjustment or nozzle
checking.
Load a sheet of unused paper Letter-sized or larger.
(→P.80)
(→P.82)
Paper Too Large / Press ↑ Key
Cause
Corrective Action
Paper that is too large for the printer has been loaded. Load paper of the correct size.
(→P.112)
Need A4/Letter Vert. or Larger
Cause
Paper too small for the printer has been loaded.
Corrective Action
Replace the paper with A4/Letter (vertical) or larger.
(→P.112)
Need 10 in or Larger Roll
Cause
Paper too small for the printer has been loaded.
Corrective Action
Load a roll 10 inches wide or larger.
(→P.82)
Error Message 737
Messages regarding paper
Roll Paper / Please Replace
Paper Level Low / Replace Paper
Cause
The printer has received a print job longer than the
amount of roll paper left.
Corrective Action
Hold down the Stop/Eject button for a second or
more to cancel printing, then follow these steps to
replace the roll.
1. Remove the roll.
(→P.122)
(→P.117)
2. Load a roll with enough paper left.
(→P.115)
(→P.118)
3. If no barcode was printed on the roll, specify the
paper type.
(→P.124)
4. Specify the paper length, unless a barcode has
been printed on the roll and you have deactivated
the automatic detection function of the remaining
roll paper.
(→P.125)
Press the Online button to continue with printing.
However, the roll paper may run out during the
print job and you may not be able to print all of the
document.
Paper Not Loaded / Press ↑ Key
Cause
The roll is empty.
Corrective Action
Follow the steps below to replace the used roll with a
new roll of the same type and size.
1. If the last paper on the roll has not been ejected,
follow the steps below.
1. Press the ▲ button.
2. Remove the used roll. (→P.138)
3. Press the ▼ button.
2. Load a new roll.
(→P.115)
(→P.118)
3. If no barcode was printed on the roll, specify the
paper type.
(→P.124)
4. Select the paper length, unless a barcode has
been printed on the roll or you have deactivated
the automatic detection function of the remaining
roll paper.
(→P.125)
738 Error Message
Messages regarding paper
Load Papr in Cas / Press Online.
Cause
Corrective Action
A print job for the Cassette was sent when no sheets Load paper of the type and size you have specied in
are loaded there.
the printer driver in the Cassette . (→P.80)
Change the printer driver settings to match the paper
feed slot specied for the sheet already loaded, and
then try printing again.
Hold down the Stop/Eject button for a second or
more to cancel printing.
Cassette Selectd / Press ↑ Key
Cause
Corrective Action
After printing on a roll, the printer has received a print
job that species the cassette.
1. Press the ▲ button and release the paper retainer.
2. After rewinding the roll by hand, press the ▼
button to print from the cassette.
Cassette Undetected
Cause
The Cassette is not fully inserted.
Corrective Action
Remove the Cassette , reinsert the Cassette rmly,
and press the Online button.
Media Check / Please Cancel
Cause
Corrective Action
You have attempted to print from the Cassette using
a type of paper that cannot be printed from the
Cassette .
Switch to a type of paper that is compatible with the
Cassette and try printing again.
Print from the tray.
Paper Feed Slot / SpcfdPapr NotFit
Cause
Corrective Action
Sheets supplied from the tray are being fed through a After pressing the ▼ button to eject the sheet being
different paper feed slot than specied for the paper fed, insert the sheet into the correct paper feed slot
selected in the printer driver.
for the paper specied in the printer driver.
(→P.159)
Error Message 739
Messages regarding paper
Sheets Loaded / Press ↓ To Eject
Cause
Sheets are loaded in the tray.
Corrective Action
1. Press ▼ to eject the sheet.
2. Load the indicated paper.
(→P.118)
(→P.156)
Tray Selected
Cause
A print job for manually printing on sheets was sent
when a roll is loaded.
Corrective Action
Hold down the Stop/Eject button for a second or
more to cancel printing.
Follow these steps to reload sheets.
1. Press the OK button.
2. Press ▲ .
3. Remove the roll.
4. Press ▼ .
5. Load sheets of the type and size you have
specied in the printer driver. (→P.86)
Change the printer driver settings to match the roll
already loaded, and then try printing again.
740 Error Message
Messages regarding paper
Check Supported Paper.
Cause
Corrective Action
The print job received species a type or width of
paper that is not compatible with borderless printing.
Follow the steps below to change the settings of the
print job to enable borderless printing.
1. Hold down the Stop/Eject button for a second or
more to cancel printing.
2. Make sure the dedicated printer driver for your
printer is selected and try printing again.
For information on types of paper compatible with
borderless printing, refer to the Paper Reference
Guide. (→P.107)
(→P.325)
(→P.327)
(→P.307)
Press the Online button to continue with printing.
However, note that this error may cause paper jams
and affect the printing quality.
Error Message 741
Messages regarding paper
Remove paper
Cannot Feed / Press ↑ Key
Cause
Roll paper is not fed on the Platen , even if you try
to feed it.
Corrective Action
Remove any jammed roll paper in the Paper Feed
Slot and reload the roll.
The printer has received a print job for a type of paper Check printer settings for the paper type and source.
that cannot be supplied from the paper source.
Change the paper type in the printer driver and try
printing again.
The paper in the Cassette is not loaded correctly.
Adjust the Width Guide and Length Guide to match
the paper size. (→P.156)
The Cassette is not inserted correctly.
Insert the Cassette rmly, all the way into the printer.
(→P.156)
Unsupported paper is loaded in the Cassette .
Load paper that can be used in the Cassette . Refer
to the Media Guide for details on supported paper.
(→P.107)
Too much paper is loaded in the Cassette . The
paper height exceeds the maximum capacity.
Load the paper making sure not to exceed the
Maximum Capacity Line of the Cassette . For details
on the paper capacity, see Specications (→P.72) or
the Paper Reference Guide . (→P.107)
The paper is wrinkled or warped in the Cassette .
Remove the paper, straighten it, and reload it.
742 Error Message
Messages regarding paper
Roll Paper Chk / Check Width/Spcr
Cause
The paper is loaded askew.
Corrective Action
Insert the paper and Spacer for Borderless Printing
rmly all the way into the printer.
When using A2 rolls, attach the Spacer for Borderless
Printing before loading the roll.
(→P.144)
When using sizes other than A2, remove the Spacer
for Borderless Printing before loading the roll.
(→P.144)
The paper loaded is not compatible with borderless
printing.
Load paper compatible with borderless printing and
try printing again. Paper you can use for borderless
printing is restricted to particular types of paper and
rolls of particular widths. For information on types of
paper compatible with borderless printing, refer to the
Paper Reference Guide . (→P.107)
Because paper expands or contracts depending on Use each type of paper only where the recommended
the environment of use, it may become narrower or environmental conditions are met. For details on
wider than the supported width for borderless printing. environmental conditions for various paper, see the
Paper Reference Guide . (→P.107)
Error Message 743
Messages regarding paper
Paper Loaded / Crooked
Cause
Corrective Action
The roll has been loaded askew.
Follow these steps to reload the roll.
1. Press the Online button to clear the error
message.
2. Insert the edge of the roll straight into the Paper
Feed Slot.
Paper has been loaded in the Cassette askew.
Follow the steps below to reload the paper.
1. After pressing the ▲ button to clear the error
message, remove any jammed paper from the
cassette. (→P.173)
2. Load paper in the Cassette . (→P.156)
Paper has been loaded in the tray askew.
Follow the steps below to reload the paper.
1. After pressing the ▲ button to clear the error
message, remove any jammed paper from the
tray. (→P.179)
2. Load sheets in the tray. (→P.159)
Note
• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off
or Loose in the Skew Check Lv.. setting of the printer menu. However, this may cause jams as paper
may be askew when it is printed. Also, the Platen may become soiled, which may soil the back of
the next document when it is printed.
744 Error Message
Messages regarding paper
Paper Askew / Please Reload
Cause
Corrective Action
Paper has been loaded in the Cassette askew.
Follow these steps to reload the paper.
1. Press the ▲ button.
2. Remove the sheet.
3. Press the ▼ button.
4. Load paper in the Cassette . (→P.156)
Paper has been manually loaded askew.
Follow these steps to reload the paper.
1. Press the ▲ button.
2. Remove the sheet.
3. Press the ▼ button.
4. Load a sheet manually. (→P.159)
Note
• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off
or Loose in the Skew Check Lv. setting of the printer menu. However, this may cause jams if paper
is crooked when printed. Also, the platen may become soiled, which may soil the back of the next
document when it is printed.
Error Message 745
Messages regarding paper
Paper / Please Reload
Cause
Paper has been loaded askew, or warped paper has
been loaded.
Corrective Action
Reload paper straight, in the correct position.
(→P.156)
(→P.118)
(→P.159)
Papr Size Undetected
Cause
Paper has been loaded askew, or warped paper has
been loaded.
746 Error Message
Corrective Action
Reload paper straight, in the correct position.
(→P.156)
(→P.118)
(→P.159)
Messages regarding paper
Can’t DetectPapr
Cause
Corrective Action
The paper has come out of the printer.
Remove the paper that has come out of the printer,
press the Online button, and reload the paper.
(→P.82)
(→P.86)
A paper jam occurred in the printer.
Remove the jammed paper, press the Online button,
and reload paper.
(→P.138)
(→P.179)
(→P.173)
The roll cannot be correctly detected.
Rewind the roll manually until the paper caught in
the rollers is completely out of the rollers. Press the
Online button and reload the roll.
Feed Limit..
Cause
You are pressing the ▲ button on the Control Panel
and trying to rewind the roll completely.
Corrective Action
Release ▲ .
Paper Jam / Press ↑ Key
Cause
A paper jam occurred in the printer during printing.
Corrective Action
Press the Stop/Eject button and remove the jammed
paper.
(→P.138)
(→P.179)
Error Message 747
Messages regarding paper
Cutting Error
Cause
Corrective Action
There are sheets left on the Output Tray .
Remove the paper.
There is a foreign object by the Output Tray ,
obstructing the Cutter Unit .
Remove the foreign object.
You are not using the printer under the recommended Use the printer only where the recommended
environmental conditions for the paper.
environmental conditions for the paper are met.
Note that various environmental conditions are
recommended for various types of paper. For details
on the recommended environmental conditions for
paper, see “Types of Paper”. (→P.107)
You are using paper that is not compatible with
automatic cutting.
Cut the roll manually.
(→P.130)
The Cutter Unit stops in the middle of cutting.
Move the Cutter Unit to the left, and then remove the
roll paper. If the roll cannot be cut using the Cutter
Unit , cut the roll manually.
(→P.130)
In other cases, the Cutter Unit may be damaged.
Contact your Canon dealer for assistance.
Roll P Unit / Please Check
Cause
The printer has received a print job that species
rolls, but the Roll Feed Unit is not installed.
Corrective Action
Change the paper source in the printer driver to a
source other than roll, and then try printing again.
Install the Roll Feed Unit and resend the print job.
748 Error Message
Messages regarding paper
Roll Selected / Load Roll
Cause
No roll is loaded.
Corrective Action
Follow these steps to load the roll.
1. Load the roll.
(→P.115)
(→P.118)
2. If no barcode was printed on the roll, specify the
paper type.
(→P.124)
3. Specify the paper length, unless a barcode has
been printed on the roll and you have deactivated
the automatic detection function of the remaining
roll paper.
(→P.125)
Hold down the Stop/Eject button for a second or
more to cancel printing.
Error Message 749
Messages regarding ink
Messages regarding ink
Ink Lvl: Chk xx (xx represents an ink color)
Cause
Not much ink is left.
Corrective Action
Prepare a new Ink Tank .
We recommend replacing the Ink Tank with a new Ink
Tank at this point if you plan to print large-format or
high-quantity jobs.
Ink Tank / Check xx (xx represents an ink color)
Cause
Corrective Action
There is no Ink Tank of the indicated color in the
printer.
Load or reload the Ink Tank .
(→P.642)
There is a problem with the Ink Tank .
Replace it with a new Ink Tank .
(→P.642)
750 Error Message
Messages regarding ink
Not Enough Ink
Cause
Corrective Action
The ink level is low, so you cannot clean the
Printhead .
Open the Ink Tank Cover and replace the Ink Tank
that is low with a new Ink Tank .
(→P.642)
The ink level is low, so there may not be enough ink
to nish printing.
Open the Ink Tank Cover and replace the Ink Tank
that is low with a new Ink Tank .
(→P.642)
You can print until the ink runs out by pressing the
Online button. However, if the ink runs out during
printing, the following situation will occur depending
on the position of the leading edge when it passes
through the printer.
1. No Ink Left is displayed and printing stops. Press
the Stop/Eject button to cancel printing, or open
the Ink Tank Cover , replace the ink tank that is low
with a new one, and continue printing. However,
note that because printing is paused, colors may
be slightly different. (→P.642)
2. No Ink Left / Canceling page.. is displayed and
printing stops. After the paper is ejected, open the
Ink Tank Cover and replace the ink tank that is low
with a new one. (→P.642)
Error Message 751
Messages regarding ink
No Ink Left
Cause
There is no ink left.
Corrective Action
Open the Ink Tank Cover and replace the Ink Tank
for which the Ink Lamp is ashing.
(→P.642)
Ink Tank / Replace xx (xx represents an ink color)
Cause
Corrective Action
The Ink Tank in the printer is incompatible or empty.
Load or reload the Ink Tank .
(→P.642)
There is a problem with the Ink Tank .
Replace it with a new Ink Tank .
(→P.642)
752 Error Message
Messages regarding ink
Ink Tank Cover / Close Please
Cause
The Ink Tank Cover is open.
Corrective Action
Close the Ink Tank Cover .
The remaining level of the following ink cannot be
correctly detected.
Cause
Ink level detection cannot work correctly if you use
rell ink tanks.
Corrective Action
The rell ink tank can no longer be used. See the
section “Ink level detection” in “Disabling Ink Level
Detection” and take the appropriate action. (→P.727)
Mist Full Soon
Cause
The printer cannot process any more ink mist.
Corrective Action
There is a possibility that printing may stop in the
middle of large-format or borderless printing jobs.
Contact the Canon dealer for such types of printing.
You can continue printing.
Error Message 753
Messages regarding printing or adjusment
Messages regarding printing or adjusment
Paper Type / Please Change
Cause
The Printhead and feed amount cannot be adjusted
when highly transparent lm is loaded.
Corrective Action
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.610)
Adjust the feed amount manually.
(→P.619)
Online Key / and recalibrate
Band Adj Error / Please Readjust
Cause
The feed amount cannot be adjusted; highly
transparent lm is loaded.
Corrective Action
Adjust the feed amount manually.
(→P.619)
Printhd Adj Err / Please Readjust
Cause
Corrective Action
The Printhead nozzles are clogged.
Follow the steps below to check the nozzles.
1. Print a test pattern to check the nozzles.
(→P.651)
2. Clean the Printhead if the nozzles are clogged.
(→P.652)
The Printhead cannot be aligned; highly transparent
lm is loaded.
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.610)
754 Error Message
Messages regarding printing or adjusment
Excessv Temp/Hu / Press OK/Stop
Cause
The temperature or humidity where the printer is
installed is out of the acceptable range for printer
operation.
Corrective Action
Press the Stop/Eject button and stop printing.
Use the printer in an environment that meets the
requirements for the operating environment. Note
that various environmental conditions are also
recommended for various types of paper. For details
on the recommended environmental conditions for
paper, see Paper Reference Guide ." (→P.107)
Press the OK button and complete color calibration.
However, calibration may not be completed
successfully.
Press OK and recalibrate
Cause
Corrective Action
The paper for printing a test pattern for adjustment is Load unused paper compatible with color calibration.
soiled. Otherwise, colored paper is loaded.
(→P.107)
The printed test pattern is faint.
Take steps to remedy the faint printing.
(→P.697)
Direct sunlight or strong lighting may be shining on
the printer and causing the sensor to malfunction.
Take steps to ensure the printer is not used when
exposed to direct sunlight or strong lighting.
Error Message 755
Messages regarding printheads
Messages regarding printheads
Online Key / and recalibrate
Band Adj Error / Please Readjust
Cause
The feed amount cannot be adjusted; highly
transparent lm is loaded.
Corrective Action
Adjust the feed amount manually.
(→P.619)
Printhd Adj Err / Please Readjust
Cause
Corrective Action
The Printhead nozzles are clogged.
Follow the steps below to check the nozzles.
1. Print a test pattern to check the nozzles.
(→P.651)
2. Clean the Printhead if the nozzles are clogged.
(→P.652)
The Printhead cannot be aligned; highly transparent
lm is loaded.
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.610)
Printhead x / Check Nozzles (x is Left or Right)
Cause
The printhead nozzles may be clogged.
Corrective Action
If printing is faint, clean the Printhead.
If “Left Printhead” is displayed, clean the Printhead L
; if “Right Printhead” is displayed, clean the Printhead
R.
(→P.652)
Press the Online button to continue with printing.
However, note that this error may affect the printing
quality.
To cancel printing, press the Stop/Eject button.
756 Error Message
Messages regarding printheads
Printhead / Please Check
Cause
Corrective Action
The left Printhead is installed in the right position and Turn off the printer and wait at least three seconds
vice versa.
before restoring the power. If the message is
displayed again, contact your Canon dealer for
assistance.
Check Printout
Cause
The Printhead nozzles are becoming clogged.
Corrective Action
If printing is faint, clean the Printhead . (→P.652)
Printhead x / Replace Printhd (x is Left or Right)
Cause
Corrective Action
An incompatible Printhead has been installed.
Install a Printhead specied for use with the printer. If
“Left Printhead” is displayed, install the Printhead L ;
if “Right Printhead” is displayed, install the Printhead
R.
(→P.653)
There is a problem with the Printhead .
Open the Top Cover . If the Carriage is visible,
replace the Printhead with a new one. If “Left
Printhead” is displayed, replace the Printhead L ; if
“Right Printhead” is displayed, replace the Printhead
R.
(→P.653)
If, after opening the Top Cover , you see that the
Carriage is not visible, follow the steps below.
1. Close the Top Cover and press the Online button.
2. If “Left Printhead” is displayed, install the Printhead
L ; if “Right Printhead” is displayed, install the
Printhead R .
(→P.653)
Error Message 757
Messages regarding the maintenance cartridge
Messages regarding the maintenance cartridge
Maint Cartridge / Load Cartridge
Cause
The Maintenance Cartridge is not installed.
Corrective Action
Install the Maintenance Cartridge .
(→P.661)
MTCart Full Soon
Cause
The Maintenance Cartridge is almost full.
Corrective Action
You can continue printing. However, prepare a new
Maintenance Cartridge .
Maint Cartridge / Replace Cart
Maint Cart Error / Replace Cart
Cause
Corrective Action
An incompatible or used Maintenance Cartridge has
been installed.
Install a Maintenance Cartridge specied for use with
the printer.
(→P.661)
Maint Cart Full / Replace Cart
Cause
The Maintenance Cartridge is full.
Corrective Action
After conrming that the printer has stopped
operating, replace the Maintenance Cartridge .
(→P.661)
Maint Cart Full / Replace Cart
Cause
The Maintenance Cartridge is full.
758 Error Message
Corrective Action
After conrming that the printer has stopped
operating, replace the Maintenance Cartridge .
(→P.661)
Other Messages
Other Messages
GARO Wxxxx (x represents a number)
Cause
Corrective Action
There is a problem with the print job.
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired
printing results.
Top Cover / Please Close
Cause
Corrective Action
The Top Cover is open.
Close the Top Cover .
ERROR Exxx-xxxx (x represents a letter or number)
In the following situations, turn off the printer and wait at least three seconds before restoring power.
If the message is still displayed, write down the error code and message, turn off the printer, and contact your
Canon dealer for assistance.
• Error notication (“ERROR”) is displayed with the error code on the top line of the Display Screen and a
message on the bottom of the Display Screen.
ERROR Exxx-xxxx
Call For Service
Error Message 759
Other Messages
Power On / Again
Cause
Corrective Action
Fastening tape or the Belt Stopper has not been
removed inside the Top Cover .
Follow the steps below, referring to the Quick Start
Guide as needed.
1. Turn the printer off.
2. Open the Top Cover and remove the tape or Belt
Stopper .
3. Turn the printer on.
There is a paper jam.
Follow these steps.
1. Turn the printer off.
2. Remove the jammed paper.
(→P.173)
(→P.138)
(→P.179)
3. Turn the printer on.
4. Reload the paper.
(→P.80)
(→P.82)
(→P.86)
There is a problem with the printer.
Turn off the printer and wait for three seconds or
more before restoring the power.
If the message is still displayed after this, write down
the error code and message, turn off the printer, and
contact the Canon dealer for assistance.
760 Error Message
Other Messages
Consumables Low
Cause
It is almost time to replace consumables for which
service is required.
Corrective Action
If Repl Consumables is displayed, you can continue
to use the printer for some time.
Contact your Canon dealer for assistance.
Repl Consumables
Cause
It is past the recommended time to replace
consumables for which service is required.
Corrective Action
Contact your Canon dealer for assistance.
Power On / Again / Multi-sensor Err
Cause
Direct sunlight or strong lighting may be shining on
the printer and causing the sensor to malfunction.
Corrective Action
Take steps to ensure the printer is not used when
exposed to direct sunlight or strong lighting.
Cannot update rmware
Cause
You have uploaded rmware for a different model.
Corrective Action
Check the rmware version. (→P.685)
If the message is displayed again, contact your
Canon dealer for assistance.
Error Message 761
762
Index
Index
A
Basic Environmental Performance............................77
Packaging materials............................................77
A message to check the Maintenance Cartridge
is not cleared after you replace the Maintenance
Cartridge..................................................................724
About This User Manual..............................................1
Accessing the Printer Driver Dialog Box from
Applications (Mac OS 9)..........................................559
Printer..................................................................77
Basic Printing Workflow.............................................80
Borderless Printing..................................................325
Borderless Printing at Actual Size...................307, 329
Borderless Printing....................................307, 329
Accessing the Printer Driver Dialog Box from
Applications (Mac OS X).........................................535
Borderless Printing Method.......................307, 329
Accessing the Printer Driver Dialog Box from
Applications (Windows)...................................497, 639
Borderless Printing at Actual Size
(Mac OS 9)......................................................314, 336
Accessing the Printer Driver Dialog Box from the
Operating System Menu (Windows)................149, 499
Borderless Printing at Actual Size
(Mac OS X)...................................................... 311, 333
Additional Settings Pane (Mac OS 9)......................552
Borderless Printing at Actual Size
(Windows).......................................................309, 331
Additional Settings Pane (Mac OS X).....................529
Adjusting Color on the Trailing Edge of Sheets.......626
Adjusting the Color in the Printer Driver..................214
Print Image with Actual Size......................308, 330
Borderless Printing by Resizing Originals to Fit the
Roll Width................................................................327
Borderless Printing............................................327
Color Adjustment...............................................214
Borderless Printing Method...............................327
Color Mode........................................................214
Gray Tone Adjustment.......................................217
Matching............................................................215
Adjusting the feed amount.......................................615
Adjusting the Feed Amount Automatically...............615
Adjusting the feed amount during printing.........618
Adjusting the Feed Amount Manually......................619
Adjusting the feed amount during printing.........621
Adjusting the Measurement Scale for Better
Accuracy..................................................................624
Adjusting the Printhead...........................................610
Adjusting the Printhead Alignment Automatically....610
Adjusting the Printhead Alignment Manually...........612
Scale to fit Roll Paper Width..............................328
Borderless Printing by Resizing Originals to Fit the
Roll Width (Mac OS 9).............................................345
Borderless Printing by Resizing Originals to Fit the
Roll Width (Mac OS X)............................................342
Borderless Printing by Resizing Originals to Fit the
Roll Width (Windows)..............................................340
Borderless Printing by Resizing Originals to Match
the Paper Size (Mac OS 9).....................................354
Borderless Printing by Resizing Originals to Match
the Paper Size (Mac OS X).....................................351
Borderless Printing by Resizing Originals to Match
the Paper Size (Windows).......................................349
Borderless Printing on Paper of Equivalent Size.....325
Adjusting the Printhead Height................................614
Borderless Printing............................................325
Adjusting the Vacuum Strength...............................623
Borderless Printing Method...............................325
An error message is shown on the Display
Screen.....................................................................696
Fit Media Size....................................................326
Attaching Accessories to the Roll Holder................144
By selecting color tones on Charts before printing
(Windows)...............................................................632
Attaching the Spacer for Borderless Printing....145
Mounting the 3-Inch Paper Core Attachment....144
Removing the 3-Inch Paper Core Attachment...144
Removing the Spacer for Borderless Printing...145
B
Back..........................................................................10
Banding in different colors occurs...........................700
C
Calibration multi-sensor err.....................................733
Canceling print jobs.................................................100
Canceling Print Jobs from Mac OS 9......................104
Canceling background print jobs.......................104
Canceling foreground print jobs........................105
Canceling Print Jobs from Mac OS X......................102
Index 763
Index
Canceling Print Jobs from the Control Panel..........100
Clearing Jammed Roll Paper..........................138, 708
Canceling Print Jobs from Windows........................101
Color adjustment.....................................................628
Cannot connect the printer to the network..............690
Color Settings Pane: Color (Mac OS 9)..................561
Cannot load sheets in the tray.................................726
Color Adjustment pane: color............................561
Cannot print over a NetWare network.....................695
Matching pane...................................................563
Cannot print over a network....................................690
Object Adjustment dialog box............................562
Cannot print over a TCP/IP network........................693
Color Settings Pane: Color (Mac OS X)..................536
Cannot print over AppleTalk or Bonjour networks...694
Color Adjustment pane: color............................536
Cannot update firmware..........................................761
Matching pane...................................................537
Can't DetectPapr.....................................................747
Color Settings Pane: Monochrome (Mac OS 9)......564
Carriage.....................................................................14
Color Adjustment pane: monochrome...............564
Cassette....................................................................19
Object Adjustment dialog box............................565
Cassette Selectd / Press ↑ Key...............................739
Color Settings Pane: Monochrome (Mac OS X)......538
Cassette Undetected...............................................739
Color Adjustment pane: monochrome...............538
Centering originals..................................................405
Color Settings Sheet: Color (Windows)...................501
Check Printout.........................................................757
Color Adjustment : color....................................501
Check Supported Paper..........................................741
Light Source Check Tool...................................506
Checking for Nozzle Clogging.................................651
Checking Ink Tank Levels........................................648
Matching sheet: Ambient Light Matching Mode
(Kyuanos)..........................................................505
Checking the Layout Before Printing.......................519
Matching sheet: Driver Matching Mode.............503
Preview (Macintosh)..........................................519
Matching sheet: ICC Matching Mode, Driver ICM
Mode, and Host ICM Mode...............................504
Checking the Layout Before Printing (Mac OS X)...520
Checking the Maintenance Cartridge Capacity.......667
Checking the Print Quality.......................................650
Choosing a Paper for Printing.................................202
If the paper type is not listed for selection.........202
Media type.........................................................202
Choosing the Document Type and Printing
Conditions (Mac OS 9)............................................225
Choosing the Document Type and Printing
Conditions (Mac OS X)............................................222
Object Adjustment dialog box............................502
Color Settings Sheet: Monochrome (Windows)......507
Color Adjustment : monochrome.......................507
Object Adjustment dialog box............................508
Colors in printed images are uneven.......................701
Configuring NetWare Network Settings...................592
Configuring the Communication Mode Manually.....691
Configuring the Destination for AppleTalk Network
(Macintosh)..............................................................600
Choosing the Document Type and Printing
Conditions (Windows).............................................220
Activating AppleTalk on the printer....................600
Cleaning Inside the Top Cover................................670
Configuring the Destination (Mac OS X)...........602
Cleaning Spurs Used in Paper Feeding..................675
Configuring the Destination for Bonjour Network
(Macintosh)..............................................................608
Cleaning the Paper Retainer...................................673
Cleaning the Pick Up Roller....................................674
Cleaning the Printer.................................................669
Cleaning the Printer Exterior...................................669
Cleaning the Printhead....................................652, 678
Cleaning the Printhead..............................652, 678
Clearing jammed paper...........................................708
Clearing Jammed Paper (Paper Feed Slot)....142, 712
Configuring the Destination (Mac OS 9)............601
Configuring the Destination for TCP/IP Network
(Macintosh)..............................................................604
Configuring the Destination (Mac OS 9)............604
Configuring the Destination (Mac OS X)...........606
Configuring the IP Address on the Printer...............571
Configuring the IP Address Using ARP and PING
Commands..............................................................577
Clearing Jammed Paper from the Cassette....173, 717
Configuring the IP Address Using imagePROGRAF
Device Setup Utility.........................................495, 597
If Can't DetectPapr / Remove Paper is
displayed...................................................173, 717
Configuring the IP Address Using the Printer Control
Panel.......................................................................575
If Paper Jam / Press ↑ Key is displayed....176, 720
Configuring the Printer Driver Destination
(Macintosh)..............................................................599
Clearing Jammed Paper from the Tray...179, 197, 713
764 Index
Index
Configuring the Printer Driver Destination
(Windows)...............................................................593
D
Configuring the Printer's AppleTalk Network
Settings...................................................................598
Depression on the leading edge is left....................725
Configuring the Printer's NetWare Network
Settings...................................................................582
Detection of the Remaining Roll Paper...................127
Desktop Stacker................................................71, 200
Configuring the Printer's TCP/IP Network
Settings...................................................................573
Device Settings Pane (Mac OS 9)...........................551
Confirming Print Settings (Mac OS 9).....................542
Digital Photo Front-Access......................................496
Checking a preview of the settings....................542
Documents are printed crooked..............................704
Checking a print preview...................................543
Documents are printed in monochrome..................702
Confirming Print Settings (Mac OS X).....................517
Checking a preview of the settings....................517
Device Settings Sheet (Windows)...........................486
E
Confirming Print Settings (Windows).......................467
Email Notification When Printing is Finished or
Errors Occur............................................................581
Checking a preview of the settings....................467
Enhanced Printing Options......................................202
Checking a print preview...................................468
ERROR Exxx-xxxx
(x represents a letter or number).............................759
Checking a print preview...................................518
Confirming the Print Image Before Printing.............509
Conserving roll paper..............................................422
Error Message.........................................................729
Conserving Roll Paper by Printing Originals Without
Top and Bottom Margins.........................................423
Error Messages.......................................................731
No Spaces at Top or Bottom
(Conserve Paper)..............................................423
Error messages (if no action can be taken).......732
Conserving Roll Paper by Printing Originals Without
Top and Bottom Margins (Mac OS 9)......................429
Warning messages............................................731
Conserving Roll Paper by Printing Originals Without
Top and Bottom Margins (Mac OS X)......................426
Conserving Roll Paper by Printing Originals Without
Top and Bottom Margins (Windows).......................424
Error messages (if action can be taken)............731
Other Messages................................................732
Excessv Temp/Hu / Press OK/Stop.........................755
F
Favorites Sheet (Windows).....................................483
Conserving Roll Paper by Rotating Originals 90
Degrees...................................................................422
Feed Limit................................................................747
Conserving Roll Paper by Rotating Originals 90
Degrees (Mac OS 9)...............................................436
Feeding Roll Paper Manually..................................126
Conserving Roll Paper by Rotating Originals 90
Degrees (Mac OS X)...............................................433
Conserving Roll Paper by Rotating Originals 90
Degrees (Windows).................................................431
Rotate Page 90 degrees (Conserve Paper)......422
Consumables Low...................................................761
Control Panel.......................................................16, 20
Correcting Print Misalignment.................................610
Cutting Error............................................................748
Cutting Roll Paper After Printing..............................447
Automatic Cutting..............................................447
Cutting Roll Paper After Printing (Mac OS 9)..........453
Cutting Roll Paper After Printing (Mac OS X)..........451
Cutting Roll Paper After Printing (Windows)............450
Cutting the Leading Edge of Roll Paper
Automatically...........................................................128
Feeding Paper from the Roll Feed Unit...................146
Fine Scratches Appear on Glossy Paper from the
Cassette..................................................................704
Fine-Tuning Colors of Photos and Images
(Mac OS 9)..............................................................234
Fine-Tuning Colors of Photos and Images
(Mac OS X)..............................................................231
Fine-Tuning Colors of Photos and Images
(Windows)...............................................................228
Fine-Tuning Monochrome Settings When Printing
Photos (Mac OS 9)..................................................242
Fine-Tuning Monochrome Settings When Printing
Photos (Mac OS X).................................................239
Fine-Tuning Monochrome Settings When Printing
Photos (Windows)...................................................237
Finishing Pane (Mac OS 9).....................................549
Frequently Asked Questions...................................686
Front............................................................................8
Index 765
Index
G
Installation problems...............................................706
GARO Wxxxx (x represents a number)...................759
Giving Priority to Particular Graphic Elements and
Colors for Printing....................................................203
Advanced Settings............................................203
Color Settings....................................................205
Enhancing Printing Quality................................206
Print Priority.......................................................203
Print Quality.......................................................204
Gray Adjustment Pane (Mac OS 9).........................550
Gray Adjustment................................................550
Gray Adjustment Pane (Mac OS X).........................528
Gray Adjustment................................................528
Installing imagePROGRAF Device Setup
Utility................................................................494, 596
Installing the Roll Feed Unit....................................148
Introduction..................................................................1
L
Layout Sheet (Windows).........................................480
Line thickness is not uniform (Windows).................705
Lines are misaligned...............................................702
Load Papr in Cas / Press Online.............................739
Loading and Printing on Rolls...................................82
Loading and Printing on Sheets in the Cassette.......80
Gray Adjustment Sheet (Windows).........................482
Loading and Printing on Sheets in the Paper Feed
Slot............................................................................86
Gray Adjustment................................................482
Loading Rolls in the Roll Feed Unit......................... 118
H
Loading Rolls on the Roll Paper Holder.................. 115
Loading Sheets in the Cassette..............................156
Handling Paper........................................................106
Loading Sheets Manually................................159, 183
Handling rolls........................................................... 114
Loading heavyweight paper in the Front Paper
Feed Slot...................................................162, 186
Handling sheets.......................................................154
Loading paper in the Top Paper Feed
Slot............................................................159, 183
Handling sheets for paper feed slots.......................182
How to use this manual...............................................1
HTML Version of the Manual for Printing.....................4
I
M
Mac OS 9................................................................541
Mac OS X................................................................516
IEEE 1394 Expansion Board.....................................71
If the Printer makes a strange sound......................723
Image Edges are Blurred or White Banding
Occurs.....................................................................704
imagePROGRAF Device Setup Utility.....................493
imagePROGRAF Printmonitor (Macintosh).....534, 558
imagePROGRAF Status Monitor (Windows)...........492
Immediately After Borderless Printing, the Trailing
Edge Margin is Soiled During Regular Printing.......705
Main Menu Operations..............................................30
Entering Numbers in Main Menu Settings...........31
Selecting Menu Items..........................................30
Selecting Submenu Items...................................31
Main Menu Settings...................................................47
Adjust Printer.......................................................51
Information..........................................................57
Interface Setup....................................................53
Improving the Print Quality......................................650
Maintenance........................................................54
Initializing the Network Settings..............................572
Med.Detail Set.....................................................49
Ink level detection....................................................727
Paper Settings.....................................................48
Disabling Ink Level Detection............................728
System Setup......................................................55
Ink level detection..............................................727
Main Menu Settings (During Printing).......................58
Ink Lvl: Chk xx (xx represents an ink color).............750
Information..........................................................59
Ink Tank...................................................................641
Main Pane (Mac OS 9)............................................545
Ink Tank / Check xx (xx represents an ink color).....750
Configuration using Advanced Settings.............546
Configuration using Easy Settings....................545
Ink Tank / Replace xx
(xx represents an ink color).....................................752
Main Pane (Mac OS X)...........................................523
Ink Tank Cover (Inside)..............................................15
Configuration using Advanced Settings.............524
Ink Tank Cover / Close Please................................753
Configuration using Easy Settings....................523
Ink Tanks.................................................................641
766 Index
Index
Main Sheet (Windows)............................................474
No Ink Left...............................................................752
Configuration using Advanced Settings.............476
Not Enough Ink........................................................751
Configuration using Easy Settings....................474
Maint Cartridge / Load Cartridge.............................758
O
Maint Cartridge / Replace Cart................................758
Online Key / and recalibrate............................754, 756
Maint Cart Error / Replace Cart.........................758
Band Adj Error / Please Readjust..............754, 756
Maint Cart Full / Replace Cart...........................758
Printhd Adj Err / Please Readjust..............754, 756
Maintenance............................................................610
Optional accessories.................................................69
Maintenance Cartridge............................................661
Other Maintenance..................................................679
Making the Original Orientation Match the Paper
Orientation...............................................................446
Other Messages......................................................759
Mirror.................................................................446
Orientation.........................................................446
Rotate 180 degrees...........................................446
Making the Original Orientation Match the Paper
Orientation (Mac OS 9)...........................................459
Other problems........................................................724
Other useful settings...............................................445
Output Stacker........................................................200
P
Making the Original Orientation Match the Paper
Orientation (Mac OS X)...........................................457
Page Setup Pane (Mac OS 9).................................547
Making the Original Orientation Match the Paper
Orientation (Windows).............................................455
Page Setup Sheet (Windows).................................478
Media Check / Please Cancel.................................739
Media Detailed Settings Dialog Box
(Mac OS 9)......................................................153, 566
Page Setup Pane (Mac OS X)................................525
Paper.......................................................................106
Paper Size.........................................................106
Paper Type........................................................106
Media Detailed Settings Dialog Box
(Mac OS X)......................................................152, 539
Paper / Please Reload............................................746
Media Detailed Settings Dialog Box
(Windows).......................................................151, 510
Paper cannot be cut................................................725
Media Size Options Dialog Box (Windows)............. 511
Paper Information on Printer Dialog Box
(Mac OS X)..............................................................522
Menu Structure..........................................................32
Paper Askew / Please Reload.................................745
Paper Feed Slot / SpcfdPapr NotFit........................739
Main menu during printing...................................46
Paper Information on Printer Dialog Box
(Windows)...............................................................470
Submenus...........................................................45
Paper is not cut straight...........................................724
Main Menu...........................................................32
Messages regarding ink..........................................750
Paper Jam / Press ↑ Key.........................................747
Messages regarding paper......................................735
Paper Loaded / Crooked.........................................744
Messages regarding printheads..............................756
Paper loaded askew................................................733
Messages regarding printing or adjusment.............754
Paper Mismatch......................................................735
Messages regarding the maintenance cartridge ....758
Paper Mismatch / Prnt:PressOnline........................733
Mist Full Soon..........................................................753
Paper Mismatch / ReplcPap:Press↓........................733
MTCart Full Soon....................................................758
Paper rubs against the Printhead............................698
Paper Size / Please Check......................................737
N
Paper Too Large / Press ↑ Key..........................737
Need 10 in or Larger Roll........................................737
Need A4/Letter Vert. or Larger................................737
Network Environment..............................................569
Network environment........................................570
System requirements........................................569
Network Setting.......................................................569
Network Setting (Macintosh)...................................598
Network Setting (Windows).....................................582
Paper Too Small / Press ↑ Key..........................737
Paper Sizes............................................................. 112
Roll.................................................................... 113
Sheets............................................................... 112
Paper Too Large / Please Check.............................734
Paper Too Small / Please Check.............................734
Paper Type / Please Change...................................754
Papr Size Undetected.............................................746
Index 767
Index
PaprSiz Mismatch...................................................736
PaprSiz Mismatch / Prnt:PressOnline.....................734
PaprTyp Mismatch...................................................735
PaprTyp Mismatch / Prnt:PressOnline....................734
Power On / Again....................................................760
Power On / Again / Multi-sensor Err........................761
Preparing to Transfer the Printer.............................679
Press OK and recalibrate........................................755
Previewing Images Before Printing (Mac OS 9)......544
Previewing Images Before Printing (Mac OS X).....521
Previewing Images Before Printing (Windows).......469
Print Area...................................................................78
Rolls....................................................................79
Sheets.................................................................78
Print quality and color settings................................202
Printed colors are inaccurate...................................703
Printer Driver Settings (Mac OS 9)..........................541
Printer Driver Settings (Mac OS X).........................516
Printer Driver Settings (Windows)...........................465
Printer Menu Operations...........................................29
Printer Modes............................................................23
Menu mode, and state of the Control Panel........26
Mode transition....................................................24
Modes..................................................................23
Offline, and state of the Control Panel................25
Printing Enlargements of Scanned Originals from a
Color imageRUNNER (Mac OS X)..........................279
Completing the scanning settings on the Color
imageRUNNER.................................................280
Registering a hot folder on your computer........279
Scanning the original and print an
enlargement .....................................................280
Printing Enlargements of Scanned Originals from a
Color imageRUNNER (Windows)....................277, 512
Completing the scanning settings on the Color
imageRUNNER. .......................................278, 513
Registering a hot folder on your
computer...................................................277, 512
Scanning the original and print an
enlargement..............................................278, 513
Printing enlargements or reductions........................273
Printing from Mac OS 9.............................................92
Printing from the application software.................93
Selecting the printer............................................92
Printing from Mac OS X.............................................90
Printing from the application software.................91
Registering the printer.........................................90
Printing from Photoshop..........................................448
Using the Plug-in to Print...................................448
Using the Printer Driver to Print.........................448
Printing from Windows..............................................89
Online, and state of the Control Panel................24
Printing in Colors Matching the Measured Ambient
Light.........................................................................636
Submenu mode, and state of the Control
Panel...................................................................26
Printing in Ideal Colors for Light in the Viewing
Environment....................................................218, 631
Printer Parts................................................................8
By selecting color tones on Charts before
printing.......................................................218, 631
Printer Specifications.................................................72
Printhead.................................................................650
Printhead / Please Check........................................757
Printing in Colors Matching the Measured
Ambient Light............................................218, 631
Printhead x / Check Nozzles (x is Left or Right)......756
Printing is faint.........................................................697
Printhead x / Replace Printhd (x is Left or Right)....757
Printing Large Posters (Mac OS 9).........................387
Printheads...............................................................650
Printing Large Posters (Windows)...........................385
Printing Adobe RGB Images (Mac OS 9)................555
Printing Line Drawings and Text
(Mac OS 9)..............................................212, 249, 443
Printing Adobe RGB Images (Mac OS X)................531
Printing Adobe RGB Images (Windows).................489
Printing at full size...................................................305
Printing at Full Size (Mac OS 9)..............................323
Printing at Full Size (Mac OS X)..............................320
Printing at Full Size (Windows)...............................318
Printing banners or at other non-standard sizes.....358
Printing CAD Drawings............................................438
Printing does not start.............................................689
Printing Enlargements of Scanned Originals from a
Color imageRUNNER..............................................276
Easy Settings....................................................212
Print Target........................................................212
Print targets for line drawings and text..............212
Printing Line Drawings and Text
(Mac OS X)......................................................247, 441
Printing Line Drawings and Text
(Windows).......................................................245, 439
Printing Line Drawings and Text
(Windows, Mac OS X)............................................. 211
Easy Settings.................................................... 211
Print Target........................................................ 211
Print targets for line drawings and text.............. 211
768 Index
Index
Printing Multiple Originals Next to Each Other........380
Printing Originals Centered on Rolls (Windows).....407
Free Layout (Windows).....................................380
Printing Originals Centered on Sheets....................406
imagePROGRAF Free Layout (Macintosh).......381
Centering originals on sheets............................406
Printing Multiple Originals Next to Each Other
(Mac OS X)..............................................................391
Printing Originals Centered on Sheets
(Mac OS 9)..............................................................419
Printing Multiple Originals Next to Each Other
(Windows)...............................................................389
Printing Originals Centered on Sheets
(Mac OS X)..............................................................417
Printing Multiple Pages Continuously......................382
Printing Originals Centered on Sheets
(Windows)...............................................................415
Roll paper (banner)...........................................382
Printing Multiple Pages Continuously
(Mac OS 9)..............................................................396
Printing Photos and Images (Mac OS 9).........209, 262
Printing Multiple Pages Continuously
(Mac OS X)..............................................................394
Print Target........................................................209
Printing Multiple Pages Continuously
(Windows)...............................................................393
Printing Photos and Images (Mac OS X)................259
Printing Multiple Pages Per Sheet...........................383
Easy Settings....................................................209
Print targets for photos and images..................209
Printing Photos and Images (Windows)..................257
Page Layout......................................................383
Printing Photos and Images
(Windows, Mac OS X).............................................207
Printing Multiple Pages Per Sheet (Mac OS 9).......403
Easy Settings....................................................207
Printing Multiple Pages Per Sheet (Mac OS X).......400
Print Target........................................................207
Printing Multiple Pages Per Sheet (Windows).........398
Print targets for photos and images..................207
Printing Office Documents.......................................213
Printing Photos in Monochrome..............................219
Easy Settings....................................................213
Printing Photos in Monochrome (Mac OS 9)...........270
Print Target........................................................213
Printing Photos in Monochrome (Mac OS X)..........267
Print targets for office documents......................213
Printing Office Documents (Mac OS 9)...................255
Printing Office Documents (Mac OS X)...................253
Printing Office Documents (Windows).....................251
Printing on Non-Standard Paper Sizes...................359
Registering non-standard paper size in the
printer driver......................................................359
Printing Photos in Monochrome (Windows)............265
Printing Posters in Sections....................................384
Page Layout......................................................384
Printing procedure.....................................................80
Printing Vertical or Horizontal Banners
(Large-Format Printing)...........................................358
Fit Roll Paper Width..........................................358
Specifying custom media sizes for temporary
use.....................................................................359
Printing Vertical or Horizontal Banners
(Large-Format Printing; Mac OS 9).........................376
Printing on Non-Standard Paper Sizes
(Mac OS 9)..............................................................366
Print the banner.................................................377
Printing on Non-Standard Paper Sizes
(Mac OS X)..............................................................364
Printing on Non-Standard Paper Sizes
(Windows)...............................................................360
Printing by using Custom Media Size................361
Printing by using Custom Size..........................360
Printing on Oversized Paper...................................305
Oversize............................................................305
Printing Options Using Rolls and Sheets..................88
Paper Size...........................................................88
Printing Options Using Rolls and Sheets............88
Rolls and Sheets.................................................88
Printing Originals Centered on Rolls.......................405
Centering originals relative to roll paper width..405
Register a Custom Media Size..........................376
Printing Vertical or Horizontal Banners
(Large-Format Printing; Mac OS X).........................373
Print the banner.................................................374
Register a Custom Page Size...........................373
Printing Vertical or Horizontal Banners
(Large-Format Printing; Windows)..........................369
Creating the banner in the application...............370
Printing the banner............................................370
Registering a Custom Media Size.....................369
Printing With Watermarks........................................445
Watermark.........................................................445
Printing with Watermarks-COPY, FILE COPY,
and so on (Mac OS 9).............................................463
Printing Originals Centered on Rolls (Mac OS 9)....412
Printing with Watermarks-COPY, FILE COPY,
and so on (Windows)...............................................461
Printing Originals Centered on Rolls (Mac OS X)...409
Problems with the printing quality............................697
Index 769
Index
Problems with the printing quality caused by the
type of paper...........................................................702
R
Reducing Dust from Cutting Rolls...........................134
Remove paper.........................................................742
Cannot Feed / Press ↑ Key...............................742
Fit Roll Paper Width..........................................274
Resizing Originals to Fit the Roll Width
(Mac OS 9)..............................................................295
Resizing Originals to Fit the Roll Width
(Mac OS X)..............................................................292
Resizing Originals to Fit the Roll Width
(Windows)...............................................................290
Resizing Originals to Match the Paper Size............273
Removing Heavyweight Paper from the Front
Paper Feed Slot......................................................196
Removing Installed Printer Drivers..........................707
Removing imagePROGRAF Device Setup
Utility (Windows)................................................707
Removing imagePROGRAF Status Monitor
(Windows).........................................................707
Enlarged/Reduced Printing...............................273
Fit Media Size....................................................273
Resizing Originals to Match the Paper Size
(Mac OS 9)..............................................................302
Resizing Originals to Match the Paper Size
(Mac OS X)..............................................................300
Removing printer drivers (Windows).................707
Resizing Originals to Match the Paper Size
(Windows)...............................................................298
Removing Printer Drivers and imagePROGRAF
Printmonitor (Macintosh)...................................707
Responding to Messages........................................729
Error messages (if action can be taken)............729
Removing Paper from the Cassette........................171
Error messages (if no action can be taken).......729
Removing Roll from the Roll Feed Unit...................122
Other Messages................................................730
Removing Rolls From the Roll Holder..................... 117
Warning messages............................................729
Removing Sheets from the Top Paper Feed
Slot..................................................................172, 195
Roll Holder Set..................................................70, 143
Removing the Roll Feed Unit..................................147
Roll P Unit / Please Check......................................748
Repl Consumables..................................................761
Roll Paper / Please Replace...................................738
Replacing Ink Tanks................................................642
Paper Level Low / Replace Paper.....................738
Paper Not Loaded / Press ↑ Key.......................738
Compatible Ink Tank..........................................642
Precautions when handling an Ink Tank............642
Replacing an Ink Tank.......................................643
Replacing the Maintenance Cartridge.....................661
Compatible Maintenance Cartridge...................661
Precautions when handling the Maintenance
Cartridge............................................................661
Replacing the Maintenance Cartridge...............662
Replacing the Printhead..........................................653
Compatible Printhead........................................653
Roll paper cannot be inserted into the Paper Feed
Slot..........................................................................726
Roll Paper Chk / Check Width/Spcr........................743
Roll Paper Unit Cover (Inside)...................................13
Roll Selected / Load Roll.........................................749
Roller marks are left across the trailing edge
of paper...........................................................705, 725
S
Precautions when handling the Printhead.........653
Selecting the Cassette as the Paper Source...........154
Replacing the Printhead....................................654
Selecting the Paper Size (Cassette).......................170
When to replace the Printhead..........................653
Selecting the Paper Size (Tray)...............................193
Resizing Originals by Entering a Scaling Value.......275
Selecting the Paper Type (Cassette).......................167
Enlarged/Reduced Printing...............................275
Selecting the Paper Type (Roll)...............................124
Scaling...............................................................275
Selecting the Paper Type (Tray)......................168, 191
Resizing Originals by Entering a Scaling Value
(Mac OS 9)..............................................................286
Selecting the Roll as the Paper Source................... 114
Resizing Originals by Entering a Scaling Value
(Mac OS X)..............................................................283
Settings Summaries Dialog Box (Windows)............471
Resizing Originals by Entering a Scaling Value
(Windows)...............................................................281
Sheets Loaded / Press ↓ To Eject............................740
Resizing Originals to Fit the Roll Width...................274
Enlarged/Reduced Printing...............................274
770 Index
Selecting the Tray as the Paper Source..........155, 182
Sharing the Printer in Windows...............................594
Software..................................................................465
Special Settings Dialog Box (Mac OS 9).................567
Special Settings Dialog Box (Windows)..................514
Index
Specifications............................................................72
Support Sheet (Windows).......................................485
Ink........................................................................74
Switching Modes.......................................................27
Interface..............................................................73
Switching the Printer Online/Offline.....................27
Maximum stacking capacity................................76
Switching to Menu Mode.....................................28
Paper...................................................................75
Paper capacity (Cassette)...................................76
T
Printer..................................................................72
The back side of the paper is dirty..........................700
Printing performance...........................................73
The contrast becomes uneven during printing........700
Specifying NetWare Print Services..........................587
Choosing the type of print services...................587
The Data lamp on the Control Panel does not
light up.....................................................................689
Using NWADMIN or PCONSOLE to set up the
print server........................................................588
The Display Screen indicates the system is filling
with ink....................................................................689
Specifying NetWare Protocols.................................590
The edges of the paper are dirty.............................699
Specifying Paper in the Printer Driver.....................688
The Front Tray Guides are in the Front Paper Feed
Slot. ........................................................................726
Specifying Paper in the Printer Driver (Mac OS 9)....98
Specifying Paper in the Printer Driver (Mac OS X)...96
Specifying Paper in the Printer Driver (Windows).....94
Specifying Printer-Related Information....................579
Specifying the Cutting Method for Rolls..................130
Eject (waiting for ink to dry after printing)..........131
Manual (when using paper or media that
cannot be cut using the Cutter Unit ).................132
Paper Cutting (to have the roll cut at your
specified position)..............................................133
Specifying the Ink Drying Time for Rolls..................135
Mac OS 9..........................................................137
Mac OS X..........................................................136
Windows............................................................135
Specifying the Paper Length (Roll)..........................125
Specifying the Printer's Frame Type........................584
Specifying the Frame Type Using
imagePROGRAF Device Setup Utility...............584
The IEEE 1394 Driver Cannot Be Installed
Correctly..................................................................706
The length of printed images is inaccurate..............702
The printer consumes a lot of ink............................724
The printer does not go on......................................725
The Printer Does Not Respond Even if Print Jobs
are Sent...................................................................689
The printer ejects blank, unprinted paper................696
The printer stops during a print job..........................696
The remaining level of the following ink cannot be
correctly detected....................................................753
The surface of the paper is dirty..............................700
Tiling and multiple pages per sheet.........................380
Top Cover (Inside)..................................................... 11
Top Cover / Please Close........................................759
Tray Feed Area..........................................................12
Tray Selected..........................................................740
Specifying the Frame Type Using the Printer
Control Panel.....................................................585
Troubleshooting.......................................................686
Stand.........................................................................69
Turning the printer off..........................................21
Status Print................................................................62
Turning the printer on..........................................20
Checking the information in the Status Print
report ..................................................................63
Types of Paper........................................................107
Printing Status Print Reports...............................62
Viewing the Paper Reference Guide.................107
Submenu Display......................................................60
Cassette paper size.............................................60
Cassette type .....................................................60
Manual Paper Size..............................................61
Turning the Printer On and Off..................................20
Updating paper information............................... 110
U
Updating the Firmware............................................685
Manual Paper Type.............................................61
Confirming the firmware version........................685
Remaining ink levels and Maintenance
Cartridge capacity...............................................60
Using Color Calibration to Adjust Colors.................628
Roll: width and remaining length.........................61
Using Favorites.......................................................447
Roll: width and type.............................................61
Favorites............................................................447
Updating the firmware.......................................685
Support Pane (Mac OS X).......................................530
Index 771
Index
Using Favorites (Mac OS 9)....................................553
Printing using the favorite..................................554
W
Registering a favorite........................................553
When to Replace Ink Tanks.....................................649
Using Favorites (Mac OS X)....................................530
Before print jobs and maintenance that
consume a lot of ink..........................................649
Using Favorites (Windows).....................................472
Printing using the favorite..................................473
Registering a favorite........................................472
If a message for checking the ink is shown
on the Display Screen.......................................649
Using PosterArtist to Compose Originals................449
If a message for ink replacement is shown
on the Display Screen.......................................649
Edit Using PosterArtist......................................449
When to Replace the Maintenance Cartridge.........668
Using PosterArtist to Compose Originals
(Windows)...............................................................487
If a message for checking the Maintenance
Cartridge is shown on the Display Screen........668
Using RemoteUI......................................................580
If a message for the Maintenance Cartridge
replacement is shown on the Display Screen...668
Using the Output Stacker........................................201
Utility Pane (Mac OS X)..........................................527
Utility Sheet (Windows)...........................................484
V
Vents.........................................................................18
View Settings Dialog Box for the Printing
Application (Mac OS 9)...........................................568
View Settings Dialog Box for the Printing
Application (Mac OS X)...........................................540
View Settings Dialog Box for the Printing
Application (Windows).............................................515
Viewing Videos of Explanations..................................3
772 Index
When much of the Maintenance Cartridge
capacity is depleted...........................................668
White dots about 1 mm (0.039 in) apart appear on
printed documents, in the direction paper is fed......704
Windows..................................................................465
©CANON INC. 2007