WAFFLE BAKERS MODEL SWCBE

WAFFLE
BAKERS
MODEL
SWCBE
SWB7R1E
SWB7R2E
SWB7RBE
SWB8SQE
SWB8RBLE
SWB8RBDE
Installation and
Operation
Instructions
2M-Z7728 Rev. F 4/7/2010
SWB7R2E
SAFETY SYMBOL
These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
NOTICE
Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.
Star reserves the right to change specifications and product design without
notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.
Due to periodic changes in designs, methods, procedures, policies and
regulations, the specifications contained in this sheet are subject to change
without notice. While Star Manufacturing exercises good faith efforts to provide
information that is accurate, we are not responsible for errors or omissions
in information provided or conclusions reached as a result of using the
specifications. By using the information provided, the user assumes all risks in
connection with such use.
MAINTENANCE AND REPAIRS
Contact your local authorized service agent for service or required maintenance. Please record the model
number, serial number, voltage and purchase date in the area below and have it ready when you call to
ensure faster service.
Model No.
Authorized Service Agent
Reference the listing provided with the unit
or
Serial No.
Voltage
Purchase Date
for an updated listing go to:
Website:
E-mail
Telephone:
www.star-mfg.com
[email protected]
(800) 807-9054 Local (314) 781-2777
The Star Service Help Desk
Business
Hours:
8:00 am to 4:30 p.m. Central Standard Time
Telephone:
(800) 807-9054 Local (314) 781-2777
Fax:
(800) 396-2677 Local (314) 781-2714
E-mail
[email protected]
[email protected]
[email protected]
Website:
www.star-mfg.com
Mailing Address: Star Manufacturing International Inc.
10 Sunnen Drive
St. Louis, MO 63143
U.S.A
2
SPECIFICATIONS:
SWCBE
Type: Waffle Cone Baker 120V, 1,320 watts, 11 amp, NEMA 5-15P
208V, 990 watts, 4.8 amp, NEMA 6-15P
240V, 1,320 watts, 5.5 amp, NEMA 6-15P 230V 1,210 watts, 5.25 amp, CEE7-7
Approximate weight: installed - 29 Lb s (13 kg), shipping - 32 Lbs (14.5 kg)
Dimensions: 10" - Width, 18 1/4" - Depth, 25 1/2" (Open) 12 1/2" (Closed) - Height
(25.4 cm - Width, 46.3 cm - Depth, 64.7 cm (Open) 31.7cm (Closed) - Height)
SWB7R1E
Type: Standard Waffle Baker
120V, 900 watts, 7.5 amp, NEMA 5-15P 208V, 676 watts, 3.25 amp, NEMA 6-15P
240V, 900 watts, 3.75 amp, NEMA 6-15P 230V 825 watts, 3.5 amp, CEE7-7
Approximate weight: installed - 20 Lb s (9 kg), shipping - 23 Lbs (10.5 kg)
Dimensions: 10" - Width, 15 3/4" - Depth, 22" (Open) 9 1/2" (Closed) - Height
(25.4 cm - Width, 40 cm - Depth, 55.9 cm (Open) 24.1 cm (Closed) - Height)
SWB7R2E
Type: Standard Waffle Baker
120V, 1,800 watts, 15 amp, NEMA 5-15P
208V, 1,352 watts, 6.5 amp, NEMA 6-15P
240V, 1,800 watts, 7.5 amp, NEMA 6-15P 230V 1,650 watts, 7.2 amp, CEE7-7
Approximate weight: installed - 37 Lb s (17 kg), shipping - 41 Lbs (18.7 kg)
Dimensions: 20" - Width, 15 3/4" - Depth, 22" (Open) 9 1/2" (Closed) - Height
(50.8 cm - Width, 40 cm - Depth, 55.9 cm (Open) 24.1 cm (Closed) - Height)
SWB8SQE
Type: Standard Waffle Baker
120V, 1,645 watts, 13.7 amp, NEMA 5-15P 208V, 1,235 watts, 6.0 amp, NEMA 6-15P 240V, 1,645 watts, 6.8 amp, NEMA 6-15P 230V 1,510 watts, 6.6 amp, CEE7-7
Approximate weight: installed - 33 Lb s (15 kg), shipping - 36 Lbs (16.5 kg)
Dimensions: 10" - Width, 18 1/4" - Depth, 27" (Open) 12 1/2" (Closed) - Height
(25.4 cm - Width, 46.3 cm - Depth, 68.6 cm (Open) 31.7 cm (Closed) - Height)
SWB7RBE
Type: Belgian Waffle Baker
120V, 1,000 watts, 8.3 amp, NEMA 5-15P
208V, 751 watts, 3.6 amp, NEMA 6-15P 240V, 1,000 watts, 4.2 amp, NEMA 6-15P 230V 920 watts, 4.0 amp, CEE7-7
Approximate weight: installed - 25 Lb s (11 kg), shipping - 28 Lbs (13 kg)
Dimensions: 10" - Width, 18 1/4" - Depth, 25 1/2" (Open) 14" (Closed) - Height
(25.4 cm - Width, 46.3 cm - Depth, 64.7 cm (Open) 35.5 cm (Closed) - Height)
SWB8RBE
Type: Belgian Waffle Baker
120V, 1,320 watts, 11 amp, NEMA 5-15P
208V, 990 watts, 4.8 amp, NEMA 6-15P 240V, 1,320 watts, 4.8 amp, NEMA 6-15P 230V 1,210 watts, 5.3 amp, CEE7-7
Approximate weight: installed - 28 Lb s (12.7 kg), shipping - 31 Lbs (14 kg)
Dimensions: 10" - Width, 18 1/4" - Depth, 26 1/2" (Open) 14" (Closed) - Height
(25.4 cm - Width, 46.3 cm - Depth, 67.3 cm (Open) 35.5 cm (Closed) - Height)
SWB8RDE
Type: Belgian Waffle Baker
120V, 1,320 watts, 11 amp, NEMA 5-15P
208V, 990 watts, 4.8 amp, NEMA 6-15P 240V, 1,320 watts, 4.8 amp, NEMA 6-15P 230V 1,210 watts, 5.3 amp, CEE7-7
Approximate weight: installed - 28 Lb s (12.7 kg), shipping - 31 Lbs (14 kg)
Dimensions: 10" - Width, 18 1/4" - Depth, 26 1/2" (Open) 14" (Closed) - Height
(25.4 cm - Width, 46.3 cm - Depth, 67.3 cm (Open) 35.5 cm (Closed) - Height)
CAUTION
This equipment is designed and sold for commercial use only by personnel trained and experienced
in its operation and is not sold for consumer use in and around the home nor for use directly by
the general public in food service locations.
INSTALLATION
For your protection, we recommend that a qualified electrician install this appliance. The
electrician should be familiar with electrical installations and your local electrical requirements.
Proper connections and power supply are essential for efficient performance. The supply circuit
should be properly fused as required by electrical code. Plug the unit into a proper A.C. voltage
wall outlet only. A three-prong plug is provided with the unit. If an adapter is used be sure a
good ground is provided.
LOAD
The rated load is on the nameplate. The line in the wall outlet must be heavy enough to carry
this load, or the waffle baker will be slow in performance.
CAUTION
DO NOT CONNECT TO DIRECT CURRENT (DC).
TEFLON® COATED WAFFLE BAKERS
CAUTION
DO NOT USE METAL UTENSILS TO REMOVE WAFFLE FROM THE TEFLON® COATED
WAFFLE BAKER. THIS WILL VOID THE WARRANTY.
CAUTION
DO NOT CLEAN TEFLON® GRIDS WITH ABRASIVES. THIS WILL VOID THE
WARRANTY.
CORD, PLUG AND GROUND INSTRUCTIONS
For your protection, this appliance is equipped with a 3-conductor load cord, having a grounding
type plug. It should only be used with a properly grounded 3-prong receptacle. Do not modify.
If you use an adapter be sure your system is grounded. Connect the green wire to a mounting
screw of the receptacle. For ungrounded electrical systems, connect the green wire of the adapter
to a known permanent ground.
RELEASE AGENT CAUTION
If you find it necessary to use a release agent to keep waffles from sticking, you should brush it
on. Spraying may oversaturate the grids and the excess has the possibility of building up inside
the baker and causing damage. If you only have a spray type release agent, try spraying it into
a container and using the contents with a pastry brush.
SEASONING WAFFLE GRIDS
(Not applicable to Teflon ® coated grids)
With a pastry brush, apply vegetable oil, butter, or grid release agent on both grids. Turn power
on and allow to preheat for twenty minutes. Lift the lid and re-apply vegetable oil, or grid release
agent. Allow the unit to heat for five more minutes. The baker is now ready for use.
CAUTION
GRIDS AND CUPS HAVE VERY HIGH TEMPERATURES. DO NOT COME IN DIRECT
CONTACT WITH THESE PARTS WHEN THE WAFFLE BAKER IS IN OPERATION. DO NOT ALLOW THE CORD TO COME INTO CONTACT WITH HOT GRIDS.
MAKING WAFFLES
Turn the unit on and allow to pre-heat for 15 minutes with the grids closed. Once the baker has
reached proper temperature you can proceed as follows:
1. Brush on releasing agent, if needed
2. Lift the lid, pour in mix and close. (Belgian units wait 10 seconds)
3. Start timer by pressing the start/stop pad.
4. Rotate grids 180o. (Belgian units only)
5. When timer beeps, depress the start/ stop pad.
6. Rotate grids 180o (Belgian units only)
7. Remove waffle. (Do not use metal utensils on teflon coated waffle bakers.)
8. For next waffle repeat steps 1 through 7.
Setting the Time:
If necessary, the factory pre-set timer can be adjusted to satisfy individual preferences.
To increase time, depress and hold the "up" button. The start/ stop button can now be used to increase baking time.
To decrease time, depress and hold the “down” button. The “start/stop” button can now be used to decrease baking time.
SETTING THE TEMPERATURE
If necessary, the factory pre-set temperature can be changed: To view the temperature, depress
and hold “TEMP” button and press “START/STOP” button. Hold both buttons for 3 seconds for
the pre-set temperature to be displayed.
To increase the temperature press “+” button; to decrease press “-“ button. To lock the temperature press the “START/STOP” button.
Changing the displayed temperature from “F” (Fahrenheit) to “C” (Celsius) Hold “TEMP” button and turn “OFF” and then “ON” the lighted switch on the front panel. To
change back from “C” to “F”, repeat the same procedure. Setting the temperature is available
in both modes “F” and “C”.
HELPFUL HINTS
1. During long slack periods of the day, turn off the baker. During short slack periods, leave
unit on with the grids closed. This will help minimize carbon buildup.
2. Do not store batter in the refrigerator and expect the same speed in baking. Cold batter
will take longer to bake.
3. For proper release of waffles it is important that the batter contain the proper amount of
shortening.
CLEANING
For non-coated grids: Clean outside of baker every day that it is in use. Do not clean grids unless
a buildup of carbon forms. In order to remove carbon from grids, unplug the unit, place ammonia
soaked cloth over bottom grid, close and leave overnight. A nylon brush may then be used to
remove the carbon buildup. If you use a commercial carbon remover, make sure that it is safe
for aluminum.
Note: If carbon buildup on the grids is removed, they will need to be reseasoned. See
"Seasoning Waffle Grids"
CAUTION
DO NOT CLEAN USING A WATER JET OR SIMILAR DEVICE FOR CLEANING. DO NOT
IMMERSE IN WATER AT ANY TIME.
CAUTION
DO NOT CLEAN TEFLON® GRIDS WITH ABRASIVES. THIS WILL VOID THE WARRANTY.
For cleaning the baker outside use only a soft cloth and mild soap to keep the exterior surfaces
bright and shining. Do not use detergents, strong abrasives or metal scouring pads on the exterior
surfaces of the waffle baker.
Visit our Website at: www.star-mfg.com
Email: [email protected]
THOROUGHLYINSPECTYOURUNITONARRIVAL
This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in
which the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the
transportation company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty
status of the unit.
LIMITEDEQUIPMENTWARRANTY
All workmanship and material in Star products have a one (1) year limited warranty on parts & labor in the United States and Canada. Such warranty is
limited to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited
to the repair of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below)
should be taken to the closest Star service agency, transportation prepaid.
> Star will not assume any responsibility for loss of revenue.
> On all shipments outside the United States and Canada, see International Warranty.
* The warranty period for the JetStar six (6) ounce & Super JetStar eight (8) ounce series popcorn machines is two (2) years.
* The warranty period for the Chrome-Max Griddles is five (5) years on the griddle surface. See detailed warranty provided with unit.
* The warranty period for Teflon/Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to
Teflon/Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive cleaners. This warranty does not apply to the
“non-stick” properties of such materials.
> This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six (6) months on parts
and ninety (90) days on labor.
> This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or
the Service Center's sub-agency.
> This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and
Operating instructions.
> This warranty is not valid on Conveyor Ovens unless a "start-up/check-out" has been performed by a Factory Authorized Technician.
PARTSWARRANTY
Parts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted. Labor to replace the part is
chargeable to the customer.
SERVICESNOTCOVEREDBYWARRANTY
1.
2.
3.
4.
5.
6.
7.
8.
9.
Travel time and mileage rendered beyond the 50 mile radius limit
Mileage and travel time on portable equipment (see below)
Labor to replace such items that can be replaced easily during a daily cleaning
routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc.
Installation of equipment
Damages due to improper installation
Damages from abuse or misuse
Operated contrary to the Operating and Installation Instructions
Cleaning of equipment
Seasoning of griddle plates
10.
11.
12.
13.
14.
15.
16.
17.
18.
Voltage conversions
Gas conversions
Pilot light adjustment
Miscellaneous adjustments
Thermostat calibration and by-pass adjustment
Resetting of circuit breakers or safety controls or reset buttons
Replacement of bulbs
Replacement of fuses
Repair of damage created during transit, delivery, &
installation OR created by acts of God
PORTABLEEQUIPMENT
Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below.
These products should be taken to the Service Agency for repair:
ALL:
* The Model 510FD Fryer.
* Pop-Up Toasters
* The Model J4R, 4 oz. Popcorn Machine.
* Butter Dispensers
* The Model 518CMA & 526CMA Cheese Melter.
* Pretzel Merchandisers
* The Model 12MC & 15MC & 18MCP Hot Food Merchandisers.
* Pastry Display Cabinets
* The Model 12NCPW & 15NCPW Nacho Chip/Popcorn Warmer.
* Nacho Chip Merchandisers
* All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers.
* Accessories of any kind
* All Nacho Cheese Warmers except Model 11WLA Series Nacho Cheese Warmer.
*SneezeGuards
* All Condiment Dispensers except the Model HPDE, & SPDE Series Dispenser.
* Pizza Ovens
* All Specialty Food Warmers except Model 130R, 11RW Series, and 11WSA Series.
* Heat Lamps
* All QCS/RCS Series Toasters except Model QCS3 & RCS3 Series.
* Pumps
The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty.
FORASSISTANCE
Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Service Department.
In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using.
Part# 2M-4497-2 05/06 RB
*
TIME/TEMP COTROLLER
BOTTOM
ELEMENT
RTD PROBE
TOP ELEMENT
NI
CA
+
SN
ES
RO
J
D
I
C
SWITCH
E
G
G
F
A
C
B
TRANSFORMER
RELAY
D
WIRING DIAGRAM SWB7RBE/SWB8RBLE
*
N
GROUND
WHITE
(BLUE)
D
A
B
CORD ASSY
120V 15A
240V 7.5A
230CE
GREEN
FUSE (2)
SEE NOTE 1
ELEMENT
GROUND
TERMINAL BLOCK
A
B
C
D
E
F
G
I
J
BOARD.
REV. F 3/29/2005
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
IF RELAY IS ON THE CONTROL
3. 2 H WIRES ARE NOT NECESSARY
BOARD IN SOME CASES.
NOTES:
1. USE FUSES ON 230V CE
MODELS ONLY.
2. RELAY MAY BE ON THE CONTROL
SWITCH
ELEMENT
RELAY
TIME/TEMP CONTROLLER
ELECTRICAL SCHEMATIC
TRANSFORMER
TERMINAL BLOCK
L
E
BLACK
(BROWN)
D
C
C
RTD PROBE
SWITCH
(BACK VIEW)
J
C
F
SK1611
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
TRANSFORMER
TIME/TEMP
CONTROL
RELAY
SWITCH
ELEMENT
TOP ELEMENT
ELEMENT
CONTROLLER
TIME/TEMP
CA
+
ES
SN
RO
E
GROUND
TERMINAL BLOCK
NI
BOTTOM ELEMENT
ELECTRICAL SCHEMATIC
A
B
C
D
E
F
G
J
E
D
RTD PROBE
RELAY
TRANSFORMER
*
WIRING DIAGRAM SWB7R1E
*
L
D
A
B
N
GROUND
WHITE
(BLUE)
GREEN
REV. F 3/29/2005
CORD ASSY
120V 15A
240V 7.5A
230V CE
SEE NOTE 1
FUSE (2)
NOTES:
1. USE FUSES ON 230V CE MODELS
ONLY.
2. RELAY MAY BE ON THE CONTROL
BOARD IN SOME CASES.
3. 2 H WIRES ARE NOT NECESSARY
IF RELAY IS ON THE CONTROL
BOARD.
BLACK
(BROWN)
TERMINAL
BLOCK
C
B
C
GROUND
F
SWITCH
(BACK VIEW)
D
SWITCH
A
C
J
G
G
SK1607
TRANSFORMER
TIME/TEMP
CONTROLLER
A
B
C
D
E
F
G
J
TOP ELEMENT
+
SN
ES
RO
E
ELEMENT
SWITCH
RELAY
ELEMENT
TRANSFORMER
TIME/TEMP
CONTROLLER
D
RTD PROBE
RELAY
ELEMENT
TRANSFORMER
*
ELEMENT
E
SWITCH
RELAY
ELECTRICAL SCHEMATIC
NI
CA
BOTTOM ELEMENT
TIME/TEMP
CONTROLLER
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRING DIAGRAM SWB7R2E
A
GROUND
TOP ELEMENT
NI
CA
+
S
SN
E
RO
E
BOTTOM ELEMENT
C
TERMINAL BLOCK
B
F
GROUND
TIME/TEMP
CONTROLLER
D
SWITCH
C
J
G
G
E
D
RELAY
SK1608
D
C
SWITCH
J
G
G
B
D
A
C
B
A
N
WHITE
(BLUE)
TERMINAL
BLOCK
L
BLACK
(BROWN)
GREEN
REV. F 03/29/2005
CORD ASSY
120V 15A
240V 7.5A
230CE
GROUND
SEE NOTE 1
FUSE (2)
SWITCH
(BACK VIEW)
C
GROUND
F
2. RELAY MAY BE ON THE CONTROL
BOARD IN SOME CASES.
3. 2 H WIRES ARE NOT NECESSARY
IF RELAY IS ON THE CONTROL
BOARD.
NOTES:
1. USE FUSES ON 230V CE MODELS ONLY.
RTD PROBE
TRANSFORMER
*
*
*
10
BOTTOM
ELEMENT
TIME/TEMP
CONTROLLER
TOP ELEMENT
NI
C
A
+
NE
S
RO
S
C
G
E
J
SWITCH
D
G
WIRING DIAGRAM SWB8SQE
RTD
PROBE
11
F
D
A
C
B
B
SWITCH
(BACK VIEW)
A
C
TRANSFORMER
D
J
C
L
GROUND
GREEN
CORD ASSY
120V 15A
240V 7.5A
230CE
TERMINAL BLOCK
N
WHITE
(BLUE)
PROBE
RTD
TRANSFORMER
SEE NOTE 1
FUSE (2)
BLACK
(BROWN)
E
RTD PROBE
D
C
F
SWITCH
ELEMENT
ELEMENT
GROUND
TERMINAL BLOCK
A
B
C
D
E
F
G
J
BOARD.
REV. F 3/29/2005
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
IF RELAY IS ON THE CONTROL
3. 2 H WIRES ARE NOT NECESSARY
BOARD IN SOME CASES.
2. RELAY MAY BE ON THE CONTROL
NOTES:
1. USE FUSES ON 230V CE
MODELS ONLY.
RELAY
ELECTRICAL SCHEMATIC
TIME/TEMP
CONTROLLER
SK1609
12
13
TIME/TEMP COTROLLER
BOTTOM ELEMENT
RTD PROBE
TOP ELEMENT
D
C
SWITCH
E
G
G
WIRING DIAGRAM SWB8RBDE
F
A
C
B
TRANSFORMER
RELAY
D
N
GROUND
WHITE
(BLUE)
D
A
B
CORD ASSY
120V 15A
240V 7.5A
230CE
GREEN
FUSE (2)
SEE NOTE 1
ELEMENT
J
A
B
C
D
E
F
G
GROUND
TERMINAL BLOCK
REV. 03-29-2005
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
WIRE ASSEMBLY
NOTES:
1. USE FUSES ON 230V CE
MODELS ONLY.
SWITCH
ELEMENT
RELAY
TIME/TEMP CONTROLLER
ELECTRICAL SCHEMATIC
TRANSFORMER
TERMINAL BLOCK
L
E
BLACK
(BROWN)
D
C
C
RTD PROBE
SWITCH
(BACK VIEW)
J
C
F
SK1788
14
PARTS LIST
June 3, 2009, Rev F
MODEL SWB7RBE/SWB8RBLE Waffle Bakers
Key
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
-
25
26
27
28
29
30
31
32
33
34
36
37
38
NI
NI
NI
Part
Number
2I-Z0057
2E-Z3385
B9-73028
B9-73029
B9-Z1723
2E-Z1858
2J-Z7497
B9-73004
B9-73003
B9-73002
2P-Z1735
2C-Z2670
2C-08-07-0064
B9-Z1733
B9-Z1790
2V-Z1799
B9-Z1800
2A-Z2644
B9-Z8773
B9-Z8772
2N-Z1457
2N-Z2720
2N-Z2010
2N-Z2011
2C-Z1674
2F-Z1666
B9-Z1768
B9-Z4846
2A-Z6635
2R-09-WB-0027
2F-Z1746
B9-Z1767
2E-Z1837
B9-Z1805
B9-73010
2A-Z2664
B9-Z1765
B9-Z2643
B9-73011
B9-Z1772
B9-Z1776
B9-73033
2C-Z2613
B9-Z1724
2E-05-07-0351
2E-05-07-0350
2E-Z2974
2E-Y9050
2E-Z2145
2E-Z2146
2E-Z2148
2E-Z2147
2K-Y1139
B9-Z1760
2M-Z1753
Number
Per
Unit
4
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
2
1
2
1
1
1
1
1
1
1
1
2
2
2
2
1
1
1
Description and Model Designation
FOOT RUBBER
LEAD IN CORD 120V 15A
LEAD IN CORD 240V
LEAD IN CORD 230V CE
COVER-BOTTOM
SWITCH 20A/120V MOLVENO
TIMER-TEMPERATURE CONTROL
BODY ASSEMBLY
YOKE ASSEMBLY
HINGE TUBE ASSEMBLY
PLUG CAP 3/4
NUT 1/4-20 W/LOCKWASHER
ACORN NUT
CUP 7"
SWB7RBE
CUP 8"
SWB8RBLE
7" CUP SUPPORT
SWB7RBE
8" CUP SUPPORT
SWB8RBLE
SPACER 3/8X0.035
PLATE
SWB7RBE
PLATE
SWB8RBLE
ELEMENT 500W 120V SWB7RBE
ELEMENT 500W 240V
SWB7RBE
ELEMENT 660W 120V
SWB8RBLE
ELEMENT 660W 240V
SWB8RBLE
STUD 1/4-20 X 2 1/4
GRID 7" BELGIAN BOTTOM
SWB7RBE
GRID BOTTOM 8" BELGIANLITE
SWB8RBLE
GRID 7" BELGIAN COATED
SWB7RBSE
SHORT HANDLE ROD PLATED
HANDLE BLACK 3/8-16
GRID 7" BELGIAN
SWB7RBE
GRID 8" BELGIANLITE
SWB8RBLE
RTD PROBE 2000 OM
BRACKET STOPPER
TOP HINGE ASSEMBLY
PIN-HINGE
LOWER HINGE MACHINED
SPACER 1/4X0.028
BRACKET REAR ASSEMBLY
TENSION SPRING
PLATE CLAMP
COLLAR ASSEMBLY
SET-SCREW 10-32X3/8
COVER-BACK
TRANSFORMER 115/10V 6VA 120V
TRANSFORMER 230V/10V 6VA 240V
TRANSFORMER 230V/10V CE 230V CE
TERMINAL BLOCK
FUSEHOLDER 230V CE
FUSE CARRIER 230V CE
FUSE 5A 250V 230V CE
SWB7RBE
FUSE 8A 250V 230V CE
SWB8RBLE
BUSHING, HINGE TUBE
DRIP TRAY (not shown)
CONTROL PANEL OVERLAY
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED
INCLUDE MODEL AND SERIAL NUMBER
PAGE
OF
1
1
Some items are included for illustrative purposes only and in certain instances may not be available.
NI = NOT ILLUSTRATED
Star
Manufacturing
International, Inc.
15
16
PARTS LIST
MODEL
Key
Number
Part
Number
April 7, 2010, Rev F
SWB7R1E/SWB7R2E Waffle Bakers
Number
Per
Unit
Description and Model Designation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
2I-Z0057
2E-Z3385
B9-73028
B9-73029
B9-Z1926
B9-Z1927
2E-Z1858
2J-Z7497
B9-73074
B9-73073
2P-Z1735
2C-Z2670
2C-08-07-0041
2D-Z7611
2V-Z1799
2A-Z2644
2C-Z1674
B9-Z8773
2N-Z2843
2N-Z2264
2F-Z1770
2F-Z1769
4
1
1
1
1
1
1/2
1/2
1
1
2/4
2/4
1/2
1/2
1/2
2/4
2/4
2/4
1/2
1/2
1/2
1/2
FOOT RUBBER
LEAD IN CORD 120V 15A
LEAD IN CORD 240V
LEAD IN CORD 230V CE
COVER-BOTTOM SINGLE
COVER-BOTTOM DOUBLE
SWITCH 20A/120V MOLVENO
TIMER-TEMPERATURE CONTROL
BODY ASSEMBLY SINGLE
BODY ASSEMBLY DOUBLE
PLUG CAP 3/4
NUT 1/4-20 W/LOCKWASHER
ACORN NUT
CUP 7"
7" CUP SUPPORT
SPACER 3/8X0.035
STUD 1/4-20 X 2 1/4
PLATE
ELEMENT ROD 475W 120V ELEMENT ROD 475W 240V GRID 7" STANDARD BOTTOM
GRID 7" STANDARD
SWB7R1E
SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E
SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
18
19
2N-Z2040
2N-Z2135
2R-09-WB-0027
1/2
1/2
1/2
ELEMENT ROD 425W 120V
ELEMENT ROD 425W 240V
HANDLE BLACK 3/8-16
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
20
21
22
23
24
25
26
27
28
29
30
31
34
35
36
2A-Z2606
B9-Z2016
B9-73044
B9-04-WB-0198
2C-08-07-0040
2E-Z1837
B9-04-WB-0231
B9-Z2008
B9-Z2612
2E-05-07-0351
2E-05-07-0350
2E-Z2974
B9-Z1925
2E-Y9050
2E-Z2145
2E-Z2146
2E-Z2147
1/2
1/2
1/2
1/2
2/4
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1
1
2
2
2
SPACER CUP 7"
CUP SUPPORT HINGE ASSEMBLY
PIN HINGE
ACORN NUT
RTD PROBE 2000 OHM
WIRE CHANNEL COVER
WIRE CHANNEL
BRACKET-TRANSFORMER
TRANSFORMER 115/10V 6VA 120V
TRANSFORMER 230V/10V 6VA 240V TRANSFORMER 230V/10V 230V CE
BRACKET-TERMINAL
TERMINAL BLOCK
FUSEHOLDER 230V CE
FUSEHOLDER 230V CE
FUSE 8A 250V 230V CE
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
SWB7R1E/SWB7R2E
NOT ILLUSTRATED
B9-Z1853
B9-Z1751
2M-Z1753
2M-Z2624
DRIP TRAY, SINGLE
DRIP TRAY, DOUBLE
CONTROL PANEL OVERLAY - SINGLE
CONTROL PANEL OVERLAY - DOUBLE
SWB7R1E
SWB7R2E
SWB7R1E
SWB7R2E
--
--
--
--
1
1
1
1
SWB7R2E
SWB7R2E
SWB7R2E
IMPORTANT:
SPECIFY VOLTAGE
OR TYPE
WHEN
ORDERING,
GAS DESIRED
INCLUDE
MODEL
AND
SERIAL
NUMBER
PAGE
OF
Some items
are included for illustrative
only and in certain
instances
may not be available.
purposes
Star
International Holdings, Inc. Company
17
1
1
18
PARTS LIST
MODEL
Key
Number
Part
Number
April 7, 2010, Rev F
SWB8SQE Waffle Baker
Number
Per
Unit
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
33
34
35
2I-Z0057
2E-Z3385
B9-73028
B9-73029
B9-Z1723
2E-Z1858
2J-Z7497
B9-73004
B9-Z1845
2P-Z1735
2C-Z2670
2C-08-07-0064
B9-Z1830
B9-Z1831
2A-Z2644
B9-Z8774
2N-Z2841
2N-Z2249
2C-Z1674
B9-Z1780
2R-09-WB-0027
2A-Z2607
B9-Z1779
2N-Z2842
2N-Z2248
B9-85016
B9-85015
B9-Z1764
B9-Z2643
2T-Z2043
2E-Z1837
B9-Z1724
2E-05-07-0351
2E-05-07-0350
2E-Z2974
2E-Y9050
B9-Z1859
B9-Z1835
2E-Z2145
2E-Z2146
2E-Z2147
4
1
1
1
1
1
1
1
1
2
2
1
2
2
2
2
1
1
2
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
2
2
2
FOOT RUBBER
LEAD IN CORD 120V 15A LEAD IN CORD 240V
LEAD IN CORD 230V CE
COVER-BOTTOM
SWITCH 20A/120V MOLVENO
TIMER-TEMPERATURE CONTROL
BODY ASSEMBLY
FRONT SUPPORT
PLUG CAP 3/4
NUT 1/4-20 W/LOCKWASHER
ACORN NUT
CUP CUP SUPPORT
SPACER 3/8X0.035
PLATE
ELEMENT 855W 120V ELEMENT 855W 240V STUD 1/4-20 X 2 1/4
GRID 8" SQUARE BOTTOM
HANDLE BLACK 3/8-16
SPACER GRID 8" SQUARE
ELEMENT 790W 120V
ELEMENT 790W 240V CUP SUPPORT SQUARE ASSEMBLY
TOP HINGE ASSEMBLY
LOWER HINGE MACHINED
SPACER 1/4X0.028
THERMOSTAT
RTD PROBE 2000 OM COVER-BACK
TRANSFORMER 115/10V 6VA 120V TRANSFORMER 230V/10V 6VA 240V
TRANSFORMER 230V/10V 230V CE
TERMINAL BLOCK
PLATE-COVER-HINGE
SPACER
FUSEHOLDER 230V CE
FUSE CARRIER 230V CE
FUSE 8A 250V 230V CE
NOT ILLUSTRATED
B9-Z1760
2M-Z1753
1
1
DRIP TRAY
CONTROL PANEL OVERLAY
--
--
IMPORTANT:
SPECIFY VOLTAGE
OR TYPE
WHEN
ORDERING,
GAS DESIRED
INCLUDE
MODEL
AND
SERIAL
NUMBER
PAGE
OF
Some items
are included for illustrative
only and in certain
instances
may not be available.
purposes
Star
International Holdings, Inc. Company
19
1
1
20
PARTS LIST
MODEL
Key
Number
Part
Number
SWCBE Waffle Baker
Number
Per
Unit
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
36
37
38
2I-Z0057
2E-Z3385
B9-73028
B9-73029
B9-Z1723
2E-Z1858
2J-Z7497
B9-73004
B9-Z1810
2P-Z1735
2C-Z2670
2A-09-WB-0094
B9-Z1790
B9-Z1800
2A-Z2644
B9-Z8772
2N-Z2010
2N-Z2011
2C-Z1674
B9-Z1775
B9-Z1774
2C-08-07-0112
2R-09-WB-0027
2C-08-07-0230
2R-Z5658
2C-08-07-0088
2A-Z2608
B9-85017
2E-Z1837
B9-73010
B9-Z1764
B9-Z2643
B9-Z1724
2E-05-07-0351
2E-05-07-0350
2E-Z2974
2E-Y9050
B9-Z1859
B9-Z1835
2E-Z2145
2E-Z2146
2E-Z2147
4
1
1
1
1
1
1
1
1
2
2
1
2
1
2
2
2
2
2
1
1
2
1
2
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
2
2
2
FOOT RUBBER
LEAD IN CORD LEAD IN CORD LEAD IN CORD COVER-BOTTOM
SWITCH 20A/120V MOLVENO
TIMER-TEMPERATURE CONTROL
BODY ASSEMBLY
FRONT SUPPORT
PLUG CAP 3/4
NIT 1/4-20 W/LOCKWASHER
LOCK BULLET
CUP CUP SUPPORT
SPACER 3/8X0.035
PLATE
ELEMENT 660W 120V ELEMENT 660W 240V STUD 1/4-20 X 2 1/4
GRID 8" CONE BOTTOM
GRID 8" CONEBAKER
SET SCREW 1/4-20 X 1/4
HANDLE BLACK 3/8-16
SCREW 8-32 X 3/8 ACHD
LOCKING ARM 5.25"
SCREW 3/8-16X1 1/4 SHCS
SPACER CUP SUPPORT ASSEMBLY CONE
RTD PROBE 2000 OM
TOP HINGE ASSEMBLY
LOWER HINGE MACHINED
SPACER 1/4X0.028
COVER-BACK
TRANSFORMER 115/10V 6VA 120V
TRANSFORMER 230V/10V 6VA 240V
TRANSFORMER 230V/10V 230V CE
TERMINAL BLOCK
PLATE-COVER-HINGE
SPACER
FUSEHOLDER FUSE CARRIER FUSE 8A 250V NOT ILLUSTRATED
B9-Z1760
2M-Z1753
1
1
DRIP TRAY
CONTROL PANEL OVERLAY --
--
April 7, 2010, Rev F
120V 15A
240V
230V CE
230V CE
230V CE
230V CE
IMPORTANT:
SPECIFY VOLTAGE
OR TYPE
WHEN
ORDERING,
GAS DESIRED
INCLUDE
MODEL
AND
SERIAL
NUMBER
PAGE
OF
Some items
are included for illustrative
only and in certain
instances
may not be available.
purposes
Star
International Holdings, Inc. Company
21
1
1
22
PARTS LIST
MODEL
Key
Number
Part
Number
SWB8RBDE Waffle Baker
Number
Per
Unit
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
36
37
38
2I-Z0057
2E-Z3385
B9-73028
B9-73029
B9-Z1723
2E-Z1858
2J-Z7497
B9-73004
B9-Z1810
2P-Z1735
2C-Z2670
2C-08-07-0041
2C-08-07-0064
B9-Z1790
B9-Z3731
2A-Z2644
B9-Z8771
2N-Z2010
2N-Z2011
2C-Z1674
B9-Z3734
2F-Z9333 2R-09-WB-0027
2A-Z6635
2A-70-WB-0132
2C-08-07-0040
2C-08-07-0037
2C-08-07-0054
2E-Z1837
B9-73010
B9-Z1764
B9-Z2643
B9-Z1724
B9-Z2985
2E-05-07-0351
2E-05-07-0350
2E-Z2974
2E-Y9050
B9-Z1859
B9-Z1835
2E-Z2145
2E-Z2146
2E-Z2147
4
1
1
1
1
1
1
1
1
2
2
2
2
2
1
2
2
2
2
2
2
1
1
1
2
2
1
1
1
1
1
2
1
1
1
1
1
1
1
1
2
2
2
FOOT RUBBER
LEAD IN CORD LEAD IN CORD LEAD IN CORD COVER-BOTTOM
SWITCH 20A/120V MOLVENO
TIMER-TEMPERATURE CONTROL
BODY ASSEMBLY
FRONT SUPPORT
PLUG CAP 3/4
NUT 1/4-20 W/LOCKWASHER
BOLT 3/8-24 x 1/2 HEX
HEX ACORN NUT 3/8-24
CUP CUP SUPPORT
SPACER 3/8X0.035
PLATE
ELEMENT 660W ELEMENT 660W STUD 1/4-20 X 2 1/4
GRID 8" DIAMETER MACHINED
LOCK HANDLE
HANDLE-BLACK 3/8-16
SHORT HANDLE RED PLATED
LOCK PIN
ACORN NUT 1/4-20
SCREW 6-32 x 3/8
NUT 3/8-16 HEX
RTD PROBE 2000 OM
TOP HINGE ASSEMBLY
LOWER HINGE MACHINED
SPACER 1/4X0.028
COVER-BACK
COVER-BACK 230CE
TRANSFORMER 115/10V 6VA TRANSFORMER 230V/10V 6VA TRANSFORMER 230V/10V TERMINAL BLOCK
PLATE-COVER-HINGE
SPACER
FUSEHOLDER FUSE CARRIER FUSE 8A 250V NOT ILLUSTRATED
B9-Z1760
2M-Z1753
1
1
DRIP TRAY
CONTROL PANEL OVERLAY
--
--
April 7, 2010, Rev F
120V 15A
240V
230V CE
120V 240V 120V
240V
230V CE
230V CE
230V CE
230V CE
IMPORTANT:
SPECIFY VOLTAGE
OR TYPE
WHEN
ORDERING,
GAS DESIRED
INCLUDE
MODEL
AND
SERIAL
NUMBER
PAGE
OF
Some items
are included for illustrative
only and in certain
instances
may not be available.
purposes
Star
International Holdings, Inc. Company
23
1
1
24