Canon 5120B001AA All in One Printer User Manual

SD4501 BW Handset.book Page ii Tuesday, January 25, 2005 7:43 PM
For a large-print version of this guide, or for product-related questions,
please contact:
• 1-800-353-2729 U.S.A.
• 1-800-461-4575 Canada
• 1-888-390-6456 TTY (Text Telephone)
Or visit us online at www.motorola.com/cordless
Copyright © 2005 Motorola, Inc.
All rights reserved. No part of this publication may be reproduced in any form or by any means or used to
make any derivative work (such as translation, transformation or adaptation) without written permission from
Motorola, Inc.
Motorola reserves the right to revise this publication and to make changes in content from time to time
without obligation on the part of Motorola to provide notification of such revision or change. Motorola
provides this guide without warranty of any kind, either implied or expressed, including but not limited to, the
implied warranties of merchantability and fitness for a particular purpose. Motorola may make improvements
or changes in the product(s) described in this manual at any time.
MOTOROLA, and the Stylized M Logo, are registered in the U.S. Patent and Trademark Office. All other
product or service names are the property of their respective owners.
SD4501 BW Handset.book Page i Tuesday, January 25, 2005 7:43 PM
Welcome
Welcome
Congratulations on your purchase of a Motorola SD4501
series telephone. Take a moment to ensure that your
purchase includes each of the items pictured.
Product registration is an important step toward enjoying
your new Motorola product. Registering helps us facilitate
warranty service, and permits us to contact you should
your Motorola product require an update or other service.
Registration is not required for warranty coverage. To
register your product online, visit:
www.motorola.com/warranty/cordless
Please retain your original dated sales receipt for your
records. For warranty service of your Motorola Product,
you will need to provide a copy of your dated sales receipt
to confirm warranty status.
i
SD4501 BW Handset.book Page ii Tuesday, January 25, 2005 7:43 PM
Handset Overview
1
Volume Controls
2
LCD Display
3
Left and Right Soft Keys
4
Up and Down Scroll
5
Phone On/Switch Lines
6
Redial list of the last 5 numbers dialed
7
Switch from upper to lower case letters
8
Use handset as intercom
9
Microphone
10 Connect to other registered devices
11 Removes Last Number Entered/Entries in
Phonebook/Caller ID List
14
1
2
3
4
5
13
12
6
11
7
8
9
10
12 End Call/Cancel Function
13 Headset/Earphone Jack
14 Handset Antenna, Ringer and Voicemail
Message Indicator
ii
SD4501 BW Handset.book Page iii Tuesday, January 25, 2005 7:43 PM
Handset Charger Overview
Welcome
Charge LED
iii
SD4501 BW Handset.book Page iv Tuesday, January 25, 2005 7:43 PM
Table of Contents
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Handset Overview . . . . . . . . . . . . . . . . . . . . . . . . . ii
Handset Charger Overview . . . . . . . . . . . . . . . . . .iii
Important Safety Instructions . . . . . . . . . . . . . . . . iv
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Battery Safety Instructions . . . . . . . . . . . . . . . . . . . 1
Charging the Handsets . . . . . . . . . . . . . . . . . . . . . 3
Setting Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Registering Your Handset . . . . . . . . . . . . . . . . . . . 4
Ringer Options . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting the Ring Tone and Ring Volume . . . . . . . . 7
Setting Key Beeps On or Off . . . . . . . . . . . . . . . . . 8
Naming a Handset or Base Station . . . . . . . . . . . . 9
Setting Touch Tone or Pulse Dialing . . . . . . . . . . 13
iv
SD4501 BW Handset.book Page v Tuesday, January 25, 2005 7:43 PM
Using Your SD4501 . . . . . . . . . . . . . . . . . . . . . . . . 14
Making a Call from the Handset or Base Unit . . 14
Answering/Ending a Call . . . . . . . . . . . . . . . . . . 15
Adjusting the Volume During a Call . . . . . . . . . . 15
Making a Call Using the Speakerphone . . . . . . . 16
Switching Between the Handset and Speakerphone 16
Muting a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Placing a Call on Hold . . . . . . . . . . . . . . . . . . . . 17
Redialing a Number . . . . . . . . . . . . . . . . . . . . . . 17
Finding a Lost or Misplaced Handset . . . . . . . . . 18
v
SD4501 BW Handset.book Page vi Tuesday, January 25, 2005 7:43 PM
Saving a Number in the Phonebook . . . . . . . . . . 19
Private Phonebooks . . . . . . . . . . . . . . . . . . . . .19
Shared Phonebooks . . . . . . . . . . . . . . . . . . . . .20
Adding a New Entry . . . . . . . . . . . . . . . . . . . . . 20
Adding Numbers to the Phonebook from Redial 21
Sorting the Phonebook . . . . . . . . . . . . . . . . . . . 22
Calling a Number from the Phonebook . . . . . . 23
Editing a Phonebook Entry . . . . . . . . . . . . . . . . 23
Deleting a Phonebook Entry . . . . . . . . . . . . . . . 24
Inserting Pauses in a Number . . . . . . . . . . . . . 24
Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . 24
Reviewing Caller ID Call List . . . . . . . . . . . . . . 25
Using Automated Dialing . . . . . . . . . . . . . . . . . 26
Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . 27
Conference Calling . . . . . . . . . . . . . . . . . . . . . . . 28
Using the Intercom . . . . . . . . . . . . . . . . . . . . . . . . 29
Intercom Setup . . . . . . . . . . . . . . . . . . . . . . . . . 29
Handset to Handset Intercom . . . . . . . . . . . . . . 30
vi
SD4501 BW Handset.book Page vii Tuesday, January 25, 2005 7:43 PM
Transferring a Call from One Handset to Another
Unannounced Transfer . . . . . . . . . . . . . . . . . .
Announced Transfer . . . . . . . . . . . . . . . . . . . .
Using the Handset as a Walkie Talkie . . . . . . . .
Monitoring a Room . . . . . . . . . . . . . . . . . . . . . . .
openLCR™ Option . . . . . . . . . . . . . . . . . . . . . . .
31
31
32
33
34
35
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
vii
SD4501 BW Handset.book Page xii Tuesday, January 25, 2005 7:43 PM
Unplug this cordless phone immediately from an outlet if:
• The power cord or plug is damaged or frayed.
• Liquid has been spilled into the product.
• The product has been exposed to rain or water. Do not retrieve the handset or base until
after you have unplugged the power and phone from the wall. Then retrieve the unit by
unplugged cords.
• The product has been dropped or the cabinet has been damaged.
• The product exhibits a distinct change in performance.
Installation Guidelines
1 Read and understand all instructions and save them for future reference.
2 Follow all warnings and instructions marked on the product.
3 Do not install this product near a bath tub, sink or shower.
4 Operate this phone using only the power source that is indicated on the marking label. If you
are unsure of the power supply to your home, consult with your dealer or local power company.
5 Do not place this product on an unstable cart, stand or table. This product may fall,
causing serious damage to the product.
6 Adjust only those controls that are covered by the operating instructions. Improper
adjustment of other controls may result in damage and will often require extensive work to
restore the product to normal operation.
7 Clean this product with a soft, damp cloth. Do not use chemicals or cleaning agents to
clean this phone.
viii
SD4501 BW Handset.book Page xi Tuesday, January 25, 2005 7:43 PM
Important Safety Instructions
Follow these safety precautions when using your cordless phone to reduce the risk of fire,
electric shock and injury to persons or property:
• Keep all slits and openings of the phone unblocked. Do not set the phone on a heating register
or over a radiator. Ensure that proper ventilation is provided at the installation site.
• Do not use while wet or while standing in water.
• Do not use this product near water (for example, near a bath tub, kitchen sink, or
swimming pool).
• Do not allow anything to rest on the power cord. Place the power cord so that it will not be
walked on.
• Never insert objects of any kind into the product slits as that may result in fire or shock.
• Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
• Do not disassemble this product. If service or repair work is required, contact the Motorola
address found in the back of this user’s guide.
• Do not overload wall outlets and extension cords.
• Avoid using during an electrical storm. Use a surge protector to protect the equipment.
• Do not use this cordless phone to report a gas leak, especially if you are in the vicinity of
the gas line.
ix
SD4501 BW Handset.book Page 1 Tuesday, January 25, 2005 7:43 PM
Getting Started
Battery Safety Instructions
Getting Started
• Do not burn, disassemble, mutilate, or puncture the
battery. The battery contains toxic materials that could
be released, resulting in injury.
• Caution: There is a risk of explosion if you replace the
battery with an incorrect battery type. Use only the
battery that came with your phone or an authorized
replacement recommended by the manufacturer.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
• Do not dispose of batteries in fire, which could result in
explosion.
• The rechargeable batteries that power this product
must be disposed of properly and may need to be
recycled. Refer to your battery’s label for battery
type. Contact your local recycling center for proper
disposal methods.
1
SD4501 BW Handset.book Page 2 Tuesday, January 25, 2005 7:43 PM
Installing the Batteries
1
Press on the indentation on the battery door, and slide
downwards to remove.
2
Plug connector into receptacle, and insert battery
into compartment. (Make sure black wire is on the
right hand side to ensure proper connection.)
3
Replace the battery door.
4
Attach the optional belt clip.
Red
2
Black
SD4501 BW Handset.book Page 3 Tuesday, January 25, 2005 7:43 PM
Setting Up the Charging Base
Your expansion handset does not require a phone line,
just charge the battery, and register it to the base. To set
up your Motorola Expansion Handset:
Plug the power cord into the back of the
charging base.
2
Plug the power cord into an electric outlet.
Getting Started
1
Charging the Handsets
Place the handset in the charging base. The LED is solid
red when the handset is charging.
Note: The initial battery charging time for your new
handset is at least 12 hours.
Charge LED
3
SD4501 BW Handset.book Page 4 Tuesday, January 25, 2005 7:43 PM
Setting Up
Registering Your Handset
You can register up to 8 devices (handsets, cameras, or
Cell Dock) to a base unit.
To register your new handset:
1
Press the right soft key to select menu.
2
Scroll to Register.
3
Press SELECT.
4
Press and hold PAGE button on base unit until the
base beeps.
Note: If you exceed the registration limit of 8 devices, the
handset display reads Unable to Register.
4
Left
soft key
Scroll
Right
soft key
SD4501 BW Handset.book Page 5 Tuesday, January 25, 2005 7:43 PM
Deregistering a Handset
Caution: You will deregister all handsets from the base
unit and render your cordless telephone system
inoperable until at least one handset is reregistered to the
base unit.
Delete or listen to all voice mail messages, if
necessary, to clear the IN USE/Voice Mail indicator.
2
Press OFF on the base unit and all handsets.
3
Press and hold down PAGE on the base unit until the
IN USE indicator begins to flash slowly, then release.
4
Press and hold down PAGE again until the IN USE
indicator begins to flash quickly, then release PAGE.
5
Quickly and fully press and release PAGE again.
“Please register handset” displays.
6
Press OK to begin the registration process or press
EXIT.
** NOTE **
All accessories use the
same process to register
and deregister to the
base unit.
Setting Up
1
5
SD4501 BW Handset.book Page 6 Tuesday, January 25, 2005 7:43 PM
Personalizing Your Handset
Personalize your new handset by selecting unique ring
tones, adjusting the ring volume for day and night time,
and assigning a name to distinguish one handset
from another.
Ringer Options
Follow the steps listed to set one ring tones for incoming
calls, and another ring tone for numbers stored in your
phonebook. (You must have Caller ID service to use this
feature)
The Ringer option has five submenus:
• Day Volume: ringer volume - factory default 6:00 AM to
9:00 PM (off, low, medium, high)
• Night Volume: Ringer volume - factory default 9:00 PM
to 6:00 AM (off, low, medium, high)
• Ringer Tone: 15 musical ring tones
• Phonebook Tone: 15 musical ring tones
• Key Beeps: On, Off, Link to Ringer (Explain in section)
6
SD4501 BW Handset.book Page 7 Tuesday, January 25, 2005 7:43 PM
Setting the Ring Tone and Ring Volume
1
Press Menu.
2
Scroll to Ringer.
3
Press Select.
4
Scroll through list of options. (Day Volume, Night
Volume, Ringer Tone, etc.)
5
Select desired option.
6
Press Change. Each tone/volume plays as you
press Change.
7
Stop at desired tone/volume to set.
N ight Volu m e: R in g e r vo lu m e fro m
8
Press Done.
9
Press Exit to return to Standby Screen or press
scroll keys to view different menu options.
9 :0 0 P M to 6 :0 0 A M (o ff, lo w ,
m e d iu m , h igh )
Ringer Tone: 2 4 rin g to n es
Phonebook Tone: 2 4 rin g to ne s
Key Beeps: O n , O ff, L in k to R in g e r
R IN G E R S U B M E N U O P T IO N S
Day Volum e : R in g e r vo lu m e fro m
6 :0 0 A M to 9 :0 0 P M (o ff, lo w ,
m e d iu m , h igh )
Setting Up
7
SD4501 BW Handset.book Page 8 Tuesday, January 25, 2005 7:43 PM
Setting Key Beeps On or Off
1
Press Menu.
2
Scroll to Ringer.
3
Press Select.
4
Scroll to Key beeps.
5
Press Change to view options. (Off, On, Link to Ringer)
Stop at the desired option.
6
Press Done to save changes.
7
Press Exit to return to Standby Screen.
8
SD4501 BW Handset.book Page 9 Tuesday, January 25, 2005 7:43 PM
Naming a Handset or Base Station
When you register a handset, it is assigned a default
name of Handsets(X). The X represent the list of devices
registered to the base unit. (e.g., Handset(1), Camera(2),
etc.) The number assigned at registration remains part of
the name (e.g., Handset(1)).
Press Menu.
2
Scroll to Namehandset.
3
Press SELECT.
4
Enter new name using keypad (up to12 characters).
The flashing underline shows cursor position.
Setting Up
1
Use DELETE to backspace and erase characters to left
of cursor.
9
SD4501 BW Handset.book Page 10 Tuesday, January 25, 2005 7:43 PM
The chart below shows how many times to press each
button on the handset to enter letters and special
characters (e.g., Press 7 three times to enter R). Use the
up and down scroll keys to backspace to
make corrections.
Note: To shift from upper to lower case letters,
press *.
Button
1
2
3
4
5
6
7
8
9
10
1
space
A
D
G
J
M
P
T
W
Number of Presses
2
3
4
–
*
,
B
C
(
E
F
)
H
I
#
K
L
/
N
O
‘
Q
R
S
U
V
?
X
Y
Z
5
1
2
3
4
5
6
7
8
9
SD4501 BW Handset.book Page 11 Tuesday, January 25, 2005 7:43 PM
Setting Date and Time
If you subscribe to Caller ID service, the date and time set
automatically with the next incoming call. Use the
following steps to manually set the date and time.
Press Menu.
2
Scroll to Date/Time.
3
Press Select.
4
Enter the time. (2 digits required for both hour and
minutes, use leading 0 for 1-digit values)
5
Press AM/PM to set AM or PM mode. (Only for 12-hour
clock user)
6
Scroll to the next field.
7
Press Change to switch time format (12 or 24 hour
clock).
Setting Up
1
11
SD4501 BW Handset.book Page 12 Tuesday, January 25, 2005 7:43 PM
8
Scroll to next field.
9
Press Change to select date format (MM/DD, DD/MM)
10 Scroll to next field.
11 Enter the current date.
12 Press Done.
13 Press Exit to return to Standby Screen.
Setting the Language Option
1
Press Menu.
2
Scroll to Language.
3
Press Select.
4
Press Change until desired language is listed.
5
Press Done.
6
Press Exit to return to the Standby Screen.
12
SD4501 BW Handset.book Page 13 Tuesday, January 25, 2005 7:43 PM
Setting Touch Tone or Pulse Dialing
Your phone is set for touch tone dialing. Do not change
the setting unless touch tone service is not available in
your area.
1
Press Menu.
2
Scroll to Tone/Pulse.
3
Press Select.
4
Press Change to switch between Tone and Pulse.
5
Press Done.
6
Press Exit to return to the Standby Screen.
Setting Up
13
SD4501 BW Handset.book Page 14 Tuesday, January 25, 2005 7:43 PM
Using Your SD4501
Making a Call from the Handset or
Base Unit
Press
. When you hear the dial tone, dial
the number.
OR
Enter the phone number, then press
. The phone
number appears on the display before it is dialed. Use the
DELETE to make corrections.
During a call, a timer on the display shows the amount of
time on the call.
14
SD4501 BW Handset.book Page 15 Tuesday, January 25, 2005 7:43 PM
Answering/Ending a Call
Press
to answer an incoming call. Press ON or
Handsfree to answer using the speakerphone.If you have
call waiting service, press
to answer the second call.
Using Your SD4501
Press
to end the call.
OR
Audio volume up
Place the handset on the base unit end the call.
Adjusting the Volume During a Call
Audio volume down
Press the top button to make caller’s voice louder, and the
bottom button to make voice softer.
When you are not on a call, use the volume keys to
change the day (6 am–9 pm) or night (9 pm–6 am)
ringer volume.
15
SD4501 BW Handset.book Page 16 Tuesday, January 25, 2005 7:43 PM
Making a Call Using the Speakerphone
1
Press HANDSFREE.
2
Dial the number.
Note: For optimal speakerphone quality, when using the
handset, make sure the belt clip is on. This raises the
handset up so it is not lying flat (the speakerphone is on
the back of the handset). Pressing Handsfree while in the
Phonebook, Caller ID Redial lists, automatically turns on
the speakerphone and dials the number.
Switching Between the Handset and
Speakerphone
Press HANDSFREE to toggle between handset and
speakerphone.
Muting a Call
Press MUTE. To unmute the call, press UNMUTE.
16
SD4501 BW Handset.book Page 17 Tuesday, January 25, 2005 7:43 PM
Placing a Call on Hold
1
Press HOLD.
2
To return to the call, press UNHOLD or
. When a
call is on hold, the intercom features are available.
Using Your SD4501
Redialing a Number
To redial the most recently dialed number:
1
Press
.
2
Press REDIAL.
To redial one of the last 5 numbers you dialed:
1
Press Redial.
2
Scroll to desired number.
3
Press
or Handsfree.
17
SD4501 BW Handset.book Page 18 Tuesday, January 25, 2005 7:43 PM
Finding a Lost or Misplaced Handset
Press PAGE on the base unit.
All handsets registered to the base unit beep.
Press
, EXIT or OK on a handset to stop paging that
handset, or press PAGE on the base unit to stop paging
all handsets.
18
SD4501 BW Handset.book Page 19 Tuesday, January 25, 2005 7:43 PM
Saving a Number in the Phonebook
Storing numbers in the phonebook makes it easy to dial
numbers you call frequently. You can enter numbers
directly into the phonebook or add them from the caller ID
or redial list.
Using Your SD4501
Storing numbers in the phonebook makes it easy to
dial numbers you call frequently. Enter numbers directly
into the phonebook or add them from the Caller ID or
redial list. Save the number in the private or
shared phonebook.
Private Phonebooks
The private phonebook is unique to each handset and is
not accessible by other handsets. Each private
phonebook stores up to 50 names and numbers.
19
SD4501 BW Handset.book Page 20 Tuesday, January 25, 2005 7:43 PM
Shared Phonebooks
The shared phonebook is accessible by all handsets and
stores up to 49 names and numbers. Each handset has
its own phonebook. The phonebook can hold 50 names
and numbers.
Adding a New Entry
1
Press PHONEBK.
2
Press select at NEW ENTRY option.
3
Enter the name up to 11 characters. Use delete to
backspace and erase characters to the left of the
blinking cursor.
4
Scroll down. The NUMBERS option appears.
5
Enter the number up to 24 characters.
6
Press DONE.
7
Press EXIT once to enter a new entry, or press EXIT
twice to return to the standby menu.
20
SD4501 BW Handset.book Page 21 Tuesday, January 25, 2005 7:43 PM
Adding Numbers to the Phonebook from Redial
Press REDIAL. The display shows the last numbers you
dialed, with the most recent number at the top.
Scroll to the number you want to save.
2
Press STORE.
3
Select the PRIVATE or SHARD phonebook.
Using Your SD4501
1
Enter the name up to 11 characters. Press DELETE to
backspace and erase characters to the left of the blinking
cursor.
4
Scroll down. The phone number displays in the
Number field.
5
Press DONE.
6
Press EXIT once to return to the redial list, or press
twice to return to the standby menu.
EXIT
21
SD4501 BW Handset.book Page 22 Tuesday, January 25, 2005 7:43 PM
To modify the number,
7
Press Delete to backspace and erase characters to
left of blinking cursor.
8
Press Done when entry is correct to save.
Note: You can also store a number in the phonebook from
the Caller ID list.
Sorting the Phonebook
Private phonebook can be sorted alphabetically and
independently in each handset. Once sorted, a
phonebook cannot be unsorted or reset to its previous
list order.
1
Press Phonebk, and scroll to any phonebook entry.
2
Select Options.
3
Scroll down to Sort Phonebk.
4
Press Select. Handset displays “Alphabetically sort
phonebk?”
5
Select YES or NO. Press
Standby Screen.
22
to return to
SD4501 BW Handset.book Page 23 Tuesday, January 25, 2005 7:43 PM
Calling a Number from the Phonebook
1
Press Phonebk.
2
Scroll to entry you want to call.
3
Press
or Handsfree.
1
Press Phonebk.
2
Scroll to entry you want to edit.
3
Press Options.
4
Scroll to Edit.
5
Press Select. Use Delete to backspace and erase
characters to the left of the blinking cursor.
6
Scroll down to move to phone number field.
7
Modify number.
8
Press Done.
Using Your SD4501
Editing a Phonebook Entry
23
SD4501 BW Handset.book Page 24 Tuesday, January 25, 2005 7:43 PM
Deleting a Phonebook Entry
1
Press Phonebk.
2
Scroll to the entry you want to delete.
3
Press Options.
4
Scroll to Delete.
5
Press Select.
Inserting Pauses in a Number
At the position where you want to insert a pause, press
and hold # until P appears. When you call a number with a
pause, the phone waits 3 seconds before transmitting the
next digits in the dialing sequence. This is useful, for
example, when you have to dial 9 to get a dial tone or for
going into a voicemail system.
Using Caller ID
Note: You must subscribe to caller ID service from your
local telephone company to use the caller ID features of
your phone.
24
SD4501 BW Handset.book Page 25 Tuesday, January 25, 2005 7:43 PM
If you subscribe to Caller ID service, the caller’s name
and/or number are displayed when you receive an
incoming call. If no Caller ID information was sent from
the phone company, or you do not subscribe to Caller ID
service, the display shows Incoming Call.
Using Your SD4501
Reviewing Caller ID Call List
The handset can hold up to 40 caller ID records.
1
Scroll to enter recent calls list. Most recent call
listed first.
2
Scroll to review more calls.
3
Press
to call selected number.
25
SD4501 BW Handset.book Page 26 Tuesday, January 25, 2005 7:43 PM
Using Automated Dialing
You can retrieve previously entered information from the
phone book (such as a PIN or credit card number) during
a phone call without have to re-enter additional numbers.
1
While on a call, scroll the entry that you want to recall.
2
Press DIAL.
3
Repeat steps 1 and 2 as many times as necessary to
complete your transaction.
Note: This function is useful when using automated
response systems. For example, you could access your
bank account number by dialing the bank’s phone
number, entering your account number (using automated
dialing), and PIN (using automated dialing). Then, you
can enter your most frequently used prompt, for example,
balance inquiry.
26
SD4501 BW Handset.book Page 27 Tuesday, January 25, 2005 7:43 PM
Advanced Features
Many of the advance features require at least 2 registered
handsets to the base unit.
With multiple handsets, you can:
• Conference call
To order expansion handsets, call:
• Talk handset to handset on the intercom
1-800-461-4575 in Canada
• Set up handsets to automatically answer
intercom calls
1-888-390-6456 TTY
• Transfer calls from one handset to another
• Monitor a room
• Use 2 handsets as walkie talkies
(Text Telephone)
On the Web:
www.motorola.com/cordless
27
Advanced Features
You can expand your phone system by adding Motorola
MD Series expansion accessories (up to a total of 8
devices). Expansion handsets do not require connection
to a phone line. Place the handset and its charging base
anywhere a standard electrical outlet is available.
SD4501 BW Handset.book Page 28 Tuesday, January 25, 2005 7:43 PM
Conference Calling
If one handset is already on a call, the display on other
handsets registered to the same base unit shows
Line in use.
Once a second handset is added to the call, the display
on all handsets shows On conference.
To connect a second handset to a call:
or DELETE on the second handset.
1
Press
2
To join a conference call, press
base unit.
3
To disconnect from the conference call, press
on either or both handsets.
28
from the
SD4501 BW Handset.book Page 29 Tuesday, January 25, 2005 7:43 PM
Using the Intercom
Intercom Setup
1
Press MENU
2
Scroll to Intercom Setup.
3
Press SELECT.
4
Scroll to the desired answering option.
5
6
OPTIONS
No Auto Answer - the handset
does not automatically answer
an intercom page.
After 1 Ring or After 3 Rings the handset automatically
Press SELECT.
answers and turns on the
Press
to return to the standby screen, or to scroll speakerphone after 1 or 3 rings.
to a different menu option.
29
Advanced Features
Set up a handset or base unit to automatically answers an
intercom page after 1 or 3 rings. All handsets are set to No
Auto Answer at the factory. Change the factory setting using
the steps below.
SD4501 BW Handset.book Page 30 Tuesday, January 25, 2005 7:43 PM
Handset to Handset Intercom
1
Press Connect to.
2
Scroll to the desired handset.
Note: The Connect to button automatically pages the
base unit if there is only one handset registered.
3
Press PAGE.
4
Press OK answer the page. The first handset to
respond is connected.
5
Press EXIT or
to stop the page. The handset
reads No Answer. (If there is no answer the page
automatically ends after two minutes.
6
Press
30
to end the page.
SD4501 BW Handset.book Page 31 Tuesday, January 25, 2005 7:43 PM
Transferring a Call from One Handset
to Another
Unannounced Transfer
Press HOLD.
2
Press Handsfree.
3
Scroll to the handset you want to transfer the call to
and press PAGE.
4
Press
to hang up. The call is transferred to the
other handset
Advanced Features
1
31
SD4501 BW Handset.book Page 32 Tuesday, January 25, 2005 7:43 PM
Announced Transfer
1
Follow steps 1 through 3 above.
2
Press OK to answer the page. You can now speak with
the person on the other handset.
3
Press UNHOLD. The call is transferred to the other
handset and all three individuals are on the call.
4
Press
32
to hang up the second handset.
SD4501 BW Handset.book Page 33 Tuesday, January 25, 2005 7:43 PM
Using the Handset as a Walkie Talkie
1
Press MENU.
2
Scroll to Walkie Talkie.
3
Press SELECT.
4
Press Handsfree on one of the handsets.
5
Press the number on the handset keypad that
corresponds to the handset you want to use walkie
talkie with. (For example, if the handset you want to
talk to is named Kitchen(2), press 2 on the keypad.
6
Press OK to answer the page.
7
Press
Advanced Features
The walkie talkie feature lets you talk handset to handset
even when the handsets are out of range from the base
unit. When a handset is in walkie talkie mode, you cannot
make or receive phone calls. You must complete steps 1
and 2 for both handsets to use walkie-talkie mode
to end the walkie talkie session..
33
SD4501 BW Handset.book Page 34 Tuesday, January 25, 2005 7:43 PM
Monitoring a Room
Room monitoring allows you to place a handset in a room
and listen to the sounds in that room from another
handset.
1
Place a handset in the room to be monitored
2
On the handset you want to listen from, press
Handsfree. The display lists the handsets registered
to the base unit.
3
If you have only 1 handset, pressing the Handsfree
button automatically pages the other handset.
4
Scroll to the handset you set up monitoring on and
press PAGE
5
Place a handset in the room to be monitored.
6
On that handset, press MENU
7
Scroll to Monitor Room and press SELECT (a). The
display shows Ready to monitor room.
8
On the handset you want to listen from, press
Handsfree. The display lists the handsets registered
to the base unit.
34
Note: If you answer
an incoming call,
the monitoring
feature is turned off.
SD4501 BW Handset.book Page 35 Tuesday, January 25, 2005 7:43 PM
The handset that was set up for monitoring automatically
answers the page. The microphone on that handset is
turned on, and the speaker is turned off. The handset you
are monitoring from shows Monitoring (handset name).
Advanced Features
You can also use the base unit for monitoring by following
the instructions above from the base unit.
To turn off monitoring, press CANCEL or OFF on either
handset.
openLCR™ Option
You can download additional ring tones and purchase
services with openLCR.
1
Go to the openLCR website at www.openLCR.com.
2
Click on Ringtone.
3
Click on Search& Listen.
4
Select any song.
openLCR and the openLCR logo are the trademarks of
openLCR.com Inc.
35
SD4501 BW Handset.book Page 36 Tuesday, January 25, 2005 7:43 PM
FCC Information
This equipment complies with Parts 15 and 68 of the FCC rules and the requirements
adopted by the Administrative Council for Terminal Attachments (ACTA).
A plug and jack used to connect this equipment to the premises wiring and telephone network
must comply with applicable FCC Part 68 rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See installation instructions for
details.
Notification of Local Telephone Company
On the bottom of this equipment is a label that contains, among other information, a product
identifier in the form US:AAAEQ##TXXXX. You must, upon request, provide this information
to your telephone company.
The digits represented by ## in the product identifier indicate the Ringer Equivalency Number
(REN) for this equipment. The REN is useful in determining the number of devices you may
connect to your telephone line and still have all of these devices ring when your telephone
number is called. In most (but not all) areas, the sum of the RENs of all devices connected to
one line should not exceed 5. To be certain of the number of devices you may connect to your
line as determined by the REN, contact your local telephone company.
36
SD4501 BW Handset.book Page 37 Tuesday, January 25, 2005 7:43 PM
Note:
• This equipment may not be used on coin service provided by the telephone company.
• Connection to party line service is subject to state tariffs. Contact the state public utility
commission, public service commission or corporation commission for information.
• If your home has specially wired alarm equipment connected to the telephone line, ensure
the installation of this cordless phone does not disable your alarm equipment. If you have
questions about what will disable alarm equipment, consult your telephone company or a
qualified installer.
• Notice must be given to the telephone company upon permanent disconnection of your
telephone from your line.
• The FCC requires that you connect your cordless telephone to the nationwide telephone
network through a modular telephone jack (USOC RJ11C/RJ11W or RJ14C/RJ14W).
Rights of the Telephone Company
Should your equipment cause trouble on your line which may harm the telephone network,
the telephone company shall, where practicable, notify you that temporary discontinuance of
service may be required.
Where prior notice is not practical and the circumstances warrant such action, the telephone
company may temporarily disconnect service immediately. In case of such temporary
discontinuance, the telephone company must:
• Promptly notify you of such temporary discontinuance
• Afford you the opportunity to correct the situation
37
SD4501 BW Handset.book Page 38 Tuesday, January 25, 2005 7:43 PM
• Inform you of your right to bring a complaint to the Commission pursuant to procedures set
forth in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the operation of the equipment. If this happens, the telephone
company will provide advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
Interference Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
38
SD4501 BW Handset.book Page 39 Tuesday, January 25, 2005 7:43 PM
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment on and off, the user is encouraged to try to correct
the interference with one or more of the following measures:
• Reorient or relocate the receiving antenna (that is, the antenna for the radio or television
that is "receiving" the interference).
• Reorient or relocate and increase the separation between the telecommunications
equipment and the receiving antenna. Connect the telecommunications equipment into an
outlet on a circuit different from that to which the receiving antenna is connected.
If these measures do not eliminate the interference, please consult your dealer or an
experienced radio/television technician for additional suggestions. Also, the Federal
Communications Commission has prepared a helpful booklet, "How to Identify and Resolve
Radio/TV Interference Problems." This booklet is available from the U.S. Government
Printing Office, Washington, D.C. 20402. Please specify stock number 004-000-00345-4
when ordering copies.
The FCC requires this product to be serviced only by Motorola or its authorized service agents.
CAUTION / WARNING: Changes or modifications not expressly approved by Motorola could
void not only the user's authority to operate the equipment, but also the
limited warranty.
Hearing Aid Compatibility
This telephone system meets the FCC standards for hearing aid compatibility.
39
SD4501 BW Handset.book Page 40 Tuesday, January 25, 2005 7:43 PM
Industry Canada (IC) Information
This equipment meets the applicable Industry Canada (IC) radio and terminal equipment
technical specifications. This is confirmed by the certification/registration number found on
the label on the bottom of the base unit. The abbreviation IC before the certification/
registration number only signifies that registration was performed based on a Declaration of
Conformity and that the Industry Canada technical specifications were met. It does not imply
that Industry Canada approved the equipment. The term “IC:” before the certification/
registration number only signifies that the Industry Canada technical specifications were met.
The Ringer Equivalency Number (REN) for this equipment is located on the FCC/IC label on
the telephone base unit. The REN is useful in determining the maximum number of devices
you may connect to your telephone line and still have all of these devices ring when your
telephone number is called. The sum of the RENs of all devices connected to one line may
not exceed 5.
Before installing this cordless phone, you should make sure that it is permissible to be connected
to the facilities of the local telecommunications company. The equipment must be installed using
an acceptable method of connection. In some cases, the telecommunications company’s inside
wiring associated with a single line individual service may be extended by means of a certified
connector assembly (telephone extension cord). You should be aware that compliance with the
above conditions may not prevent degradation of service in some situations.
The plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the rules and requirements in Industry Canada’s CS-03. A
compliant telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant.
40
SD4501 BW Handset.book Page 41 Tuesday, January 25, 2005 7:43 PM
For your protection, ensure that the electrical ground connections of the power utility,
telephone lines, and internal metallic water pipe system, if present, are connected together.
This precaution may be particularly important in rural areas.
You should not attempt to make such connections yourself. Contact the appropriate electrical
inspection authority or an electrician, as appropriate.If your home has specially wired alarm
equipment connected to the telephone line, ensure the installation of this cordless phone
does not disable your alarm equipment. If you have questions about what will disable alarm
equipment, consult your telephone company or a qualified installer.
Repairs
Repairs to this equipment should be made by an authorized Canadian maintenance facility
designated by Motorola. Any repairs or alterations made by the consumer, or any
malfunctions of this equipment, may give the telecommunications company cause to request
that you disconnect the equipment, and may void the limited warranty.
Privacy
Privacy of communications may not be ensured when using this telephone. Other devices,
including other cordless telephones, may interfere with the operation of this cordless phone or
cause noise during operation. Units without code access may be accessed by other radio
communications devices.
Hearing Aid Compatibility
This telephone system meets Industry Canada standards for hearing aid compatibility.
41
SD4501 BW Handset.book Page 42 Tuesday, January 25, 2005 7:43 PM
Interference Information
This device complies with Industry Canada’s RSS-210. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference; and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Industry Canada’s ICES-003. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment on and off, the user is encouraged to try to correct
the interference with one or more of the following measures:
• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that
is “receiving” the interference).
• Reorient or relocate and increase the separation between the telecommunications
equipment and the receiving antenna.
• Connect the telecommunications equipment into an outlet on a circuit different from that to
which the receiving antenna is connected.
42
SD4501 BW Handset.book Page 43 Tuesday, January 25, 2005 7:43 PM
If these measures do not eliminate the interference, please consult your dealer or an
experienced radio/television technician for additional suggestions.
Industry Canada publishes several publications to assist consumers with solving interference
problems, which are available from its offices or from its web site (strategis.gc.ca).
43
SD4501 BW Handset.book Page 44 Tuesday, January 25, 2005 7:43 PM
Warranty
Motorola Limited Warranty
for Consumer Products, Accessories, and Software Purchased in the United States or Canada
What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola, Inc. warrants its cordless telephones ("Products"), Motorolabranded or certified accessories sold for use with these Products ("Accessories"), and Motorola software contained on
CD-ROMs or other tangible media and sold for use with these Products ("Software") to be free from defects in materials
and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer's
exclusive remedy, and applies as follows to new Motorola Products, Accessories and Software purchased by consumers
in the United States or Canada, which are accompanied by this written warranty:
• Products and Accessories as defined above, unless otherwise provided for below. Length of coverage: one (1) year
from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.
• Decorative Accessories and Cases. Decorative covers, bezels, PhoneWrap® covers and cases. Length of
coverage: limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product.
• Monaural Headsets. Ear buds and boom headsets that transmit mono sound through a wired connection. Length of
coverage: limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product.
• Products and Accessories that are Repaired or Replaced. Length of coverage: The balance of the original
warranty or for ninety (90) days from the date returned to the consumer, whichever is longer.
• Software. Applies only to physical defects in the media that embodies the copy of the software (e.g. CD-ROM, or
floppy disk). Length of coverage: ninety (90) days from the date of purchase.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are
excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are
covered by this limited warranty.
44
SD4501 BW Handset.book Page 45 Tuesday, January 25, 2005 7:43 PM
Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or
neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b)
contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c)
use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage
or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage.
Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola
branded or certified Products, Accessories, Software or other peripheral equipment are excluded
from coverage.
Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation,
maintenance, alteration, or modification in any way by someone other than Motorola, or its authorized service centers,
are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered, or
obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola housings, or parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any
communication service or signal you may subscribe to or use with the Products, Accessories or Software is excluded
from coverage.
Software Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work
in combination with any hardware or software applications provided by third parties, that the operation of the software
products will be uninterrupted or error free, or that all defects in the software products will be corrected.
Software NOT Embodied in Physical Media. Software that is not embodied in physical media (e.g. software that is
downloaded from the internet), is provided "as is" and without warranty.
Who is Covered
This warranty extends to the first end-user purchaser, only.
45
SD4501 BW Handset.book Page 46 Tuesday, January 25, 2005 7:43 PM
What will Motorola Do?
Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or
Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/preowned or new Products, Accessories or parts. No data, software or applications added to your Product, Accessory or
Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled. To avoid losing such
data, software and applications please create a back up prior to requesting service.
How to Get Warranty Service or Other Information
In the USA, call:
1-800-353-2729
TTY 1-888-390-6456
In Canada, call:
1-800-461-4575
TTY 1-888-390-6456
For accessories and software, please call the telephone number designated above for the product with which they are
used. You will receive instructions on how to ship the Products, Accessories or Software, at your expense, to a Motorola
Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable
proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the
name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone
number.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS
EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU
OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA BE LIABLE, WHETHER
IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF
THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS
46
SD4501 BW Handset.book Page 47 Tuesday, January 25, 2005 7:43 PM
OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR
IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO
THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or
limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to
another.
Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola
software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may
only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use,
including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for
Motorola, is permitted.
47