Canon 5169B005 Digital Camera User Manual

Canon 5169B005 Digital Camera User Manual
Quick Start Guide
1
2
C
Y
P
O
3
4
This quick guide explains basic function
settings and how to shoot and play back
images. You can take this guide with you for
shooting. For detailed instructions, refer to the
EOS 5D Mark III Instruction Manual.
E
5
Preparation
Insert the battery.
Insert a card.*
The camera-front side
slot is for a CF card, and
the camera-back side
slot is for an SD card.
Y
P
CO
Attach the lens.
Align it with the red dot.
Set the lens focus
mode switch to <f>.
Set the power switch
to <1>.
English Edition
CPQ-E002-000
© CANON INC. 2012
* Shooting is possible with either a CF card or an SD card in the camera.
6
7
8
9
While holding down the
center of the Mode Dial,
set it to <A> (Scene
Intelligent Auto).
Image Playback
6
Menu Operations
Index
Magnify
6
Aim the viewfinder center over the
subject and press the shutter
button halfway to autofocus.
Y
P
O
C
Press the shutter button
completely to take the
picture.
View the image.
The captured image will be
displayed for 2 sec. on the
LCD monitor.
The M on the right of the function indicates that the function is
available only when the Mode Dial is set to d,s,f,a, or F.
Battery Life with viewfinder shooting
Temperature
At 23°C / 73°F
At 0°C / 32°F
Possible shots
Approx. 950 shots
Approx. 850 shots
<M >
button
u
x
Playback
L
Erase
C
Y
P
O
9
56
Select image
BShooting information
Press the <Q> button.
The Quick Control screen will
appear.
White balance correction
Image-recording quality
Pixels
Aperture
<6> Main Dial
<Q>
button
0
Q Quick Control
Select [z1: Image quality], then press <0>.
Turn the <6> or <5> dial to select the image-recording
quality, then press <0>.
LCD
monitor
Focus the subject.
Take the picture.
Custom Functions
Image-recording Quality
<0> button
<5> Quick
Control Dial
Y
P
O
1. Press the <M> button to display the menu.
2. Each time you press the <Q> button, the main tab will switch.
3. Turn the <6> dial to select a secondary tab, then turn the
<5> dial to select the desired item.
4. Press <0> to display the setting.
5. Turn the <5> dial to set the item, then press <0>.
C
tabs
Menu items
Menu settings
RAW: Turn the <6> dial
to select the quality.
Exposure
compensation/
AEB setting
Y
P
O
A Picture StyleN
C
Press the <b> button.
Select [A], then press <0>.
Turn the <5> dial to select the
Picture Style, then press <0>.
Style
Main
tabs
Shutter speed
Shooting mode
JPEG: Turn the <5> dial
to select the quality.
A Mode
d/s/f/a/F
Modes
Secondary
Possible shots
Description
Color tones optimized for the particular scene.
D Auto
Vivid colors and sharp images.
P Standard
Nice skin tones and slightly sharp images.
Q Portrait
R Landscape Vivid blue skies and greenery and very sharp images.
V Monochrome Black-and-white images.
For <S> (Neutral) and <U> (Faithful), refer to the
camera’s instruction manual.
Highlight tone priority
ISO speed
Picture Style
AF mode
White balance
Metering mode
C
Drive mode
Y
P
O
Flash exposure
compensation
Custom Controls
Image-recording
quality
Recording function/
Card selection
Auto Lighting
Optimizer
81: Exposure
Exposure level increments
ISO speed setting increments
Bracketing auto cancel
Bracketing sequence
Number of bracketed shots
Safety shift
Y
P
CO
82: Display/Operation
Warnings z in viewfinder
LV shooting area display
Dial direction during Tv/Av
Tilt the <9> to select the function, then turn the <6> or
<5> dial to set it.
In the <A> mode, you can only select or set the recording
function, card, image-recording quality, and drive mode.
Multi function lock
Electronic Level
Add cropping information
Each time you press the <B>
button, the screen display will
change.
Display the electronic level.
Custom Controls
83: Others
Default Erase option
84: Clear
Clear all Custom Func. (C.Fn)
Shooting Operation
A Mode
LCD Panel
Nomenclature
<o> AF mode selection/
Drive mode selection button
<m>
ISO speed setting/
Flash exposure
compensation button
<B>
AF area selection mode/
Multi-function button
<n> Metering mode selection/
White balance selection button
Mode Dial lock
release button
Mode Dial
<6>
Main Dial
Shutter
button
C
<A/k> Live View shooting/
Movie shooting switch
<0> Start/Stop
button
Y
P
O
Focus mode
switch
AEB
AF mode
White balance
Drive mode
Metering mode
Exposure level
indicator
Image-recording
quality
Battery check
Y
P
CO
Flash exposure
compensation
OK
<p>
AF start button
<A> AE lock button
<S>
AF point
selection
button
<9>
Multi-controller
<5> Quick
Control Dial
<0>
Setting button
Access lamp
s: Shutter-priority AE
All the settings necessary for
shooting are set automatically. You
just press the shutter button, and
the camera does the rest.
Possible shots
ISO speed
Shutter speed
Scene Intelligent Auto
Aim the center of the Area AF frame
over the subject.
Press the shutter button halfway to
focus.
Check the display.
Compose the shot and press the
shutter button completely.
NG
Y
P
O
d/s/f/a Modes
Viewfinder Information
Power switch
Multi function lock switch
Monochrome shooting
Aperture
Grid
([52] tab)
Area AF
frame
C
You can change the camera settings
as desired to shoot in various ways.
* Set the <R> switch to the left (Multi
function lock released).
d: Program AE
AE lock
Battery check
Flash-ready
Flash exposure
compensation
Shutter speed
Aperture
Focus
confirmation
light
AF status indicator
Maximum burst
ISO speed
Exposure level indicator
Set the Mode Dial to <d>.
The camera automatically sets the shutter speed and
aperture in the same way as the <A> mode.
Set the Mode Dial to <s>.
Turn the <6> dial to set the
desired shutter speed, then focus
the subject.
The aperture will be set automatically.
If the aperture display blinks, turn
the <6> dial until it stops blinking.
Press the <m> button, then
turn the <6> dial.
ISO 100 to 25600 can be set in
1/3-stop increments.
When “A” is selected, the ISO
speed is set automatically. When
you press the shutter button
halfway, the ISO speed setting is
displayed.
f: Aperture-priority AE
Set the Mode Dial to <f>.
Turn the <6> dial to set the desired
aperture, then focus the subject.
The shutter speed will be set
automatically.
If the shutter speed display blinks, turn
the <6> dial until it stops blinking.
C
Y
P
O
a: Manual Exposure
Set the Mode Dial to <a>.
Turn the <6> dial to set the
desired shutter speed.
Turn the <5> dial to set the
desired aperture.
Press the shutter button halfway
and check the exposure level
indicator.
f: AF ModeN
i: ISO SpeedN
i Drive Mode
Y
P
O
Press the <o> button, then
turn the <5> dial.
C
u: Single shooting
o: High-speed continuous
shooting
i: Low-speed continuous
shooting
B: Silent single shooting
M: Silent continuous
shooting
Q: 10-sec. self-timer/
Remote control
k: 2-sec. self-timer/
Remote control
k Shooting Movies
AF Area Selection Mode
Set the lens focus mode switch to
<f>.
Press the <o> button,
then turn the <6> dial.
X(One-Shot AF):
For still subjects
9(AI Focus AF):
Switches the AF mode automatically
Z(AI Servo AF):
For moving subjects
Y
P
O
S AF Point SelectionN
C
Press the <S> button, then look
through the viewfinder.
The AF point selection will change
in the direction you tilt the <9>.
If you press <9> straight down,
the center AF point (or center
Zone) will be selected.
The <6> dial selects an AF
point in the horizontal direction,
and the <5> dial selects an AF
point in the vertical direction
(toggles between zones in Zone
AF).
Press the <S> button.
Look through the viewfinder and
press the <B> button.
Each time you press the <B>
button, the AF area selection
mode changes.
Press the shutter button halfway
to focus.
A Live View Shooting
Set the switch to <A>.
Press the <0> button and the
Live View image will appear on
the LCD monitor.
C
Y
P
O
Press the shutter button halfway
to focus, then press it completely
to take the picture.
Press the <0> button to stop
the Live View shooting.
Live View shooting settings will appear under the [z2] menu
tab in the A mode and under the [z4] menu tab in the
d/s/f/a/F modes.
Battery Life with Live View Shooting
Temperature
At 23°C / 73°F
Possible shots
Approx. 200 shots
Set the switch to <k>.
The image will appear on the
LCD monitor.
At 0°C / 32°F
Approx. 180 shots
Y
P
CO
Press the <0> button to start
shooting a movie. To stop movie
shooting, press the <0> button
again.
To shoot still photos, press the
shutter button completely.
Movie shooting modes
• A/d/F : Autoexposure shooting
•s
: Shutter-priority AE shooting
•f
: Aperture-priority AE shooting
•a
: Manual exposure shooting
Movie shooting settings will appear under the [z2] and
[z3] menu tabs in the A mode and under the [z4] and
[z5] menu tabs in the d/s/f/a/F modes.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement