Owner`s manual | Canon 5608B007 Scanner User Manual

E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 1
Before you start
Connections
Owner’s Manual
DVD Recorder with Video Cassette Recorder
Getting started
FDRV-90E
OPEN/CLOSE
POWER
F.FWD
STOP/EJECT PLAY
DUBBING
SELECT
RECORD
STOP
PLAY
RECORD
S-VIDEO
VCR
VCR
VIDEO
L - AUDIO - R
DVD
DVD
Editing
INSTRUCCIONES EN ESPAÑOL INCLUIDAS
INSTRUCTIONS EN FRANÇAIS INCLUSES
• Audio/Video cables
(WPZ0102TM015 or
WPZ0102LTE01)
• Owner’s Manual
(1VMN20226)
• Quick Use Guide
(1VMN20295)
Owner's Manual
Español
Français
(You CANNOT record on any copyright protected DVD disc with this unit.)
Others
Before you use this unit , you need to complete connections. Refer to
“Connections” on pages 13-15.
To record a program easily, refer to “Easy DVD recording” on pages 16-17
after connections are completed.
VCR functions
If you need additional operating assistance after reading this owner’s manual or to
order replacement accessories, please call
TOLL FREE : 1-800-605-8453
or visit our web site at http://www.funai.us
Changing the SETUP menu
Supplied Accessory
• Remote control
• RF cable
(NA817UD)
(WPZ0901TM002)
with two AA batteries
Playing discs
VCR Plus+ and PlusCode are registered trademarks of
Gemstar Development Corporation.The VCR Plus+
system is manufactured under license from Gemstar
Development Corporation.
Recording
CHANNEL
REW
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 2
Before you start
Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
CAUTION:
CAUTION:
LOCATION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.
INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU
FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical
wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste.
Contact your council for details.
For Customer Use:
Read carefully the information located at the back of this unit and enter below the Serial No.Retain this information for future reference.
Model No. _____________________
Serial No. _____________________
2
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 3
Before you start
Important Safeguards
porting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. (Fig.A)
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD
WIRE
Getting started
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
S2898A
Connections
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Playing discs
Editing
Changing the SETUP menu
VCR functions
Others
Español
14. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the
product due to lightning and power-line surges.
15. Power Lines - An outside antenna system should not be located
in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or circuits.When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
16. Overloading - Do not overload wall outlets and extension cords
as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind into
this product through any openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
18. Servicing - Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. Damage Requiring Service - Unplug this product from the wall
outlet and refer servicing to qualified service personnel under
the following conditions:
a. When the power-supply cord or plug is damaged.
b.If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d.If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions as an improper adjustment of
other controls may result in damage and will often require
extensive work by a qualified technician to restore the product
to its normal operation.
e.If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance this
indicates a need for service.
20. Replacement Parts - When replacement parts are required, be
sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
21. Safety Check - Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
22. Heat - This product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
Recording
Français
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions should
be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should
be followed.
5. Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
EXCEPTION:A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility
of the loss of an authorization code for a CATV converter, is
not intended to be unplugged by the user for cleaning or any
other purpose, may exclude the reference to unplugging the
appliance in the cleaning description otherwise required in
item 5.
6.Attachments - Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
7.Water and Moisture- Do not use this product near water, for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
8.Accessories - Do not place this product on an unstable cart,
stand, tripod, bracket, or table.The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the
appliance should follow the manufacturer's
instructions and should use a mounting
accessory recommended by the manufacturer. An appliance and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.
9.Ventilation - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and
to protect it from overheating, and these openings must not be
blocked or covered.The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only from the
type of power source indicated on the marking label. If you are
not sure of the type of power supply to your home, consult your
appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the
operating instructions.
11. Grounding or Polarization - This product is equipped with a
polarized alternating-current line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet
only one way.This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. Power Cord Protection - Power supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where they exit
from the appliance.
13. Outdoor Antenna Grounding - If an outside antenna or cable
system is connected to the product, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges.Article 810 of
the National Electrical Code,ANSI/NFPA No. 70, provides information with regard to proper grounding of the mast and sup-
Before you start
Precautions (cont’d)
3
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 4
Before you start
Precautions (cont’d)
Installation Location
Description
Symbol
Available to DVD Video discs
DVD-V
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position. Do not
place anything directly on top of the unit. Do not place
the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from
sources of intense heat. Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper heat
dissipation. Do not block the ventilation holes on the
sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC wall outlet. Grasp it by the plug.
• If by accident water is spilled on this unit, unplug the
power cord immediately and take the unit to our
Authorized Service Center for servicing.
• Do not put your fingers or objects into the unit cassette
holder.
Moisture Condensation Warning
Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, or after heating
a cold room or under conditions of high humidity. Do not
use this unit at least for 2 hours until its inside gets dry.
About Copyright
Unauthorized copying, broadcasting, public performance
and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Notice for progressive scan outputs
Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of
525 progressive scan picture problems, it is recommended
that the user switch the connection to the ‘standard definition’ output. If there are questions regarding our TV set
compatibility with this model 525p DVD recorder, please
contact our customer service center.
Symbol in this owner's manual
Many functions of this unit are depending on the disc type
or the recording mode.
To specify for what disc type or recording mode each
function is, we put the following symbols at the beginning
of each item to operate.
4
Video
Available to DVD-RW in Video mode
DVD-RW
VR
DVD-RW
Available to DVD-RW in VR mode
DVD-R
Available to DVD-R discs
CD
Available to Audio CDs
MP3
VCR
First:
(Press:)
First:
(Press:)
DVD
VCR
Available to CD-R/RW discs with
MP3 files
Available to VHS tapes
Use only cassettes marked
.
Indicates that you need to select the DVD
mode by pressing DVD button on the
remote control before proceeding next step.
Indicates that you need to select the VCR
mode by pressing VCR button on the
remote control before proceeding next step.
Maintenance
SERVICING
• Please refer to relevant topics on the Troubleshooting
Guide on pages 101-104 before returning the product.
• If this unit becomes inoperative, do not try to correct the
problem by yourself.There are no user-serviceable parts
inside.Turn off, unplug the power plug, and please call our
help line mentioned on the front page to locate an
Authorized Service Center.
CLEANING THE CABINET
• Use a soft cloth slightly moistened with a mild detergent solution. Do
not use a solution containing alcohol, spirits, ammonia or abrasive.
CLEANING DISCS
• When a disc becomes dirty, clean it with a cleaning
cloth.Wipe the disc from the center out. Do not wipe in
a circular motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning
agents or antistatic spray intended for analogue records.
CLEANING THE DISC LENS
• If this unit still does not perform properly although you refer to
the relevant sections and to “TROUBLESHOOTING GUIDE”
in this Owner’s Manual, the laser optical pickup unit may be
dirty. Consult your dealer or an Authorized Service Center for
inspection and cleaning of the laser optical pickup unit.
DISC HANDLING
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not used.
AUTO HEAD CLEANING
• Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted
while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the
usage of rental or worn tapes can cause this problem. If
a streaky or snowy picture appears during playback, the
video heads in the unit may need to be cleaned.
1. Please visit your local Audio/Video store and purchase a
good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem,
please call our help line mentioned on the front page to
locate an Authorized Service Center.
NOTES:
• Remember to read the instructions along with the video
head cleaner before use.
• Clean video heads only when problems occur.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 5
Before you start
Before you start . . . . . . . . . . . . . . . . . . .2
Connections . . . . . . . . . . . . . . . . . . . . .13
Getting started . . . . . . . . . . . . . . . . . . .16
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.89
.90
.92
.94
.96
VCR functions . . . . . . . . . . . . . . . . . . .98
Others
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Recording and One-touch timer recording . . . .98
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
One-touch timer recording . . . . . . . . . . . . . . . . . . . .99
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Index search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Other operations . . . . . . . . . . . . . . . . . . . . . . .100
VCR functions
Others . . . . . . . . . . . . . . . . . . . . . . . .101
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.101
.104
.105
.106
.107
Español . . . . . . . . . . . . . . . . . . . . . . . .108
Français . . . . . . . . . . . . . . . . . . . . . . .112
5
Français
Troubleshooting . . .
RF converter output
Language code . . . .
Glossary . . . . . . . . . .
Specifications . . . . . .
Español
Information on DVD play . . . . . . . . . . . . . . . . . .46
Guide to displays . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Playing discs using the disc menu . . . . . . . . . . . . . . .49
Playing discs using the title menu . . . . . . . . . . . . . . .50
Special playback . . . . . . . . . . . . . . . . . . . . . . . . .51
Resume play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Fast forward / Fast reverse . . . . . . . . . . . . . . . . . . .51
Skipping TV commercials during play . . . . . . . . . . . . .52
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Step by step playback . . . . . . . . . . . . . . . . . . . . . . . .53
Slow forward / Slow reverse play . . . . . . . . . . . . . . .53
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Spatializer setting (Virtual surround) . . . . . . . . . . . .54
Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Tour of the SETUP menu . . . .
Settings for Language . . . . . . .
Settings for Display . . . . . . . . .
Settings for Audio . . . . . . . . . .
Settings for Parental lock level
Changing the SETUP menu
Playing discs . . . . . . . . . . . . . . . . . . . . .46
Changing the SETUP menu . . . . . . . . .89
Editing
Information on DVD recording . . . . . . . . . . . . . .28
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Recording speed . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Restrictions on recording . . . . . . . . . . . . . . . . . . . .28
Information on copy control . . . . . . . . . . . . . . . . . .29
Making discs playable in other DVD player (Finalize) 29
Formatting a disc . . . . . . . . . . . . . . . . . . . . . . . .30
Settings for the recording format to a blank disc . . .30
Reformatting a disc . . . . . . . . . . . . . . . . . . . . . . . . .32
Basic recording . . . . . . . . . . . . . . . . . . . . . . . . . .33
Checking the recording picture quality . . . . . . . . . .34
One-touch timer recording . . . . . . . . . . . . . . . .35
Timer recording . . . . . . . . . . . . . . . . . . . . . . . . .36
Hints for timer recording . . . . . . . . . . . . . . . . . . . . .38
Timer recording using VCR Plus+® system . . . . .39
Settings for an external source . . . . . . . . . . . . . .40
Connection to an external source . . . . . . . . . . . . . .40
Recording from an external source . . . . . . . . . . . . .41
Dubbing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Finalizing the discs . . . . . . . . . . . . . . . . . . . . . . .44
Setting a disc to protect . . . . . . . . . . . . . . . . . . .45
Playing discs
Recording . . . . . . . . . . . . . . . . . . . . . . .28
Information on disc editing . . . . . . . . . . . . . . . . .63
Guide to a title list . . . . . . . . . . . . . . . . . . . . . . . . . .63
Editing discs in Video mode . . . . . . . . . . . . . . . . . . .63
Editing discs in VR mode . . . . . . . . . . . . . . . . . . . . .64
Editing DVD-RW discs in Video mode . . . . . . . .65
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .66
Setting or clearing chapter markers . . . . . . . . . . . . .68
Editing DVD-RW discs in VR mode (Original) . .69
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .70
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .71
Setting or clearing chapter markers . . . . . . . . . . . . .73
Setting pictures for thumbnails . . . . . . . . . . . . . . . . .74
Setting titles to protect . . . . . . . . . . . . . . . . . . . . . .76
Releasing titles from protecting . . . . . . . . . . . . . . . .77
Editing DVD-RW discs in VR mode (Playlist) . . .78
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .79
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .80
Setting or clearing chapter markers . . . . . . . . . . . . .82
Setting pictures for thumbnails . . . . . . . . . . . . . . . . .83
Adding titles to a Playlist . . . . . . . . . . . . . . . . . . . . .85
Deleting a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Editing DVD-R discs . . . . . . . . . . . . . . . . . . . . . .87
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .88
Recording
Easy DVD recording . . . . . . . . . . . . . . . . . . . . . .16
Channel setting . . . . . . . . . . . . . . . . . . . . . . . . . .18
Getting channels automatically . . . . . . . . . . . . . . . . .18
Adding/deleting channels . . . . . . . . . . . . . . . . . . . . .19
Guide channel setting . . . . . . . . . . . . . . . . . . . . . . .20
Selecting the TV stereo or SAP . . . . . . . . . . . . .22
Clock setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . .23
Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . . . .24
Setting the daylight saving time . . . . . . . . . . . . . . . .26
Selecting the TV aspect ratio . . . . . . . . . . . . . . .27
Editing . . . . . . . . . . . . . . . . . . . . . . . . .63
Getting started
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . .13
Connection to a cable box or satellite box . . . .14
Connection to an Audio System . . . . . . . . . . . . .15
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Title/Chapter search . . . . . . . . . . . . . . . . . . . . . . . .56
Track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Repeat/Random/Program play . . . . . . . . . . . . . .58
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Selecting the format of audio and video . . . . . .60
Switching audio soundtrack . . . . . . . . . . . . . . . . . . .60
Switching subtitles . . . . . . . . . . . . . . . . . . . . . . . . . .61
Switching camera angles . . . . . . . . . . . . . . . . . . . . . .62
Reducing block noise . . . . . . . . . . . . . . . . . . . . . . . .62
Connections
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . .5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Functional overview . . . . . . . . . . . . . . . . . . . . . . .7
Installing batteries in the remote control . . . . . . . . . .9
Using a remote control . . . . . . . . . . . . . . . . . . . . . . .9
VCR/DVD recorder Switching . . . . . . . . . . . . . . . . . .9
SETUP/DISC/CD menu . . . . . . . . . . . . . . . . . . . . . . .10
DISPLAY menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Before you start
Table of contents
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 6
Before you start
Features
This unit not only plays DVDs, CDs and VHS tapes but also offers features for you to record to DVD discs
and edit them after that.The following features are offered with this unit.
Recording
DVD mode VCR mode
This unit is compatible with both DVD-RW, which is rewritable
repeatedly and DVD-R, which is available for recording once.
Also, this unit allows you to record to the video cassette tape.
You can choose either one for your convenience.
Up to 8 programs recording:
You can program the unit to record up to 8 programs, up
to a year in advance. Daily or weekly program recordings
are also available.
One-touch timer recording:
You can easily set a recording time as you prefer. Every
time the REC/OTR button on the remote control or the
RECORD button on the front panel pressed during
recording, the recording time will be increased by 30 minutes up to 8 hours.The recording automatically stops
when the recording time you set is reached.
The VCR Plus+ system:
You can program the automatic timer recording using the
PlusCode programming numbers that are printed in most
newspaper TV listings and TV Guide magazine.
Dubbing mode:
You can copy a DVD disc to a videotape or copy a videotape to a DVD disc.This function will be possible only if
the DVD disc and the videotape are not copy protected.
DVD mode
REC MONITOR:
You can confirm the picture quality for recording in the
current recording speed which you set.
If you want to change the recording speed, press REC
SPEED button to set the desired recording mode.
Automatic Chapter marker setting:
Chapter markers will be put on recordings as you set in
SETUP menu before attempting to record.
Automatic Title menu making:
The unit makes title menus automatically when finalizing
the disc which are recorded in Video mode.
Automatic PLAYLIST making (VR mode):
A Playlist will be prepared from an Original list, so that
you can edit titles in a Playlist as you prefer.
An Original list is kept as it is.
Play
DVD mode
Spatializer:
You can enjoy stereophonic virtual sound of spatializer®
N-2-2 ultra™ method provided by Desper Products, Inc.
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder
which is compatible with Dolby Digital or DTS, you are
allowed to experience the theater surround sound from
discs with surround sound system.
Quick search for what you want to watch:
You can easily find the part you want to watch using the search function. Search for a desired point on a disc by title, chapter or time.
Start to play from Original and Playlist (VR mode):
Title playing is available from either an Original list or Playlist.
6
VCR mode
Quick search for what you want to watch:
You can easily find the part you want to watch using the
Index search/Time search functions. An index mark will be
assigned at the beginning of each recording you make. For
Time search function, you can go to a specific point on a tape
by entering the exact amount of time you wish to skip.
Editing
DVD mode
Setting/Clearing chapter markers:
You can easily add chapter markers anywhere in your
recordings for easy editing. (VR mode)
Making your own Playlist:
With the original remains as it is, you can edit titles on
Various playlist as you prefer.
Putting names on titles.
Setting pictures for thumbnails.
Setting/clearing chapter markers.
Deleting parts of titles, etc.
Protecting titles:
To avoid editing or erasing titles, the protect function is
useful when it is ON in the original list.
Compatibility
DVD mode
Available for playing discs recorded in Video mode
on a regular DVD player (Video mode):
Discs recorded in the Video mode can be played on regular
DVD players, including computer DVD drives compatible with
DVD-Video playback*.You will need to finalize the discs
recorded in Video mode to play in other DVD players.
* DVD-Video Format (Video mode) is a new format for recording on DVD-R/RW discs that was approved by the DVD Forum
in 2000. Adoption of this format is optional for manufactures
of DVD playback devices and there are DVD-Video players,
DVD-ROM drives or other DVD playback devices that do not
play DVD-R/RW discs recorded in the DVD-Video Format.
Others
Progressive Scan system
Unlike conventional interlace scanning, the progressive scan
system provides less flickering and images in higher resolution than that of traditional television signals.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Certain audio features of this product manufactured under a license from Desper Products, Inc.
Spatializer® N-2-2 Ultra™ and the circle-in-square
device are trademarks owned by Desper Products,
Inc.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 7
Before you start
Before you start
Functional overview
Front Panel
1
2
3 4 5
6
OPEN/CLOSE
POWER
CHANNEL
REW
F.FWD
STOP/EJECT PLAY
SELECT
DUBBING
RECORD
STOP
PLAY
RECORD
22 20 18
21 19 17
16
13.
14.
15.
16.
18.
19.
21.
22.
2 3
4 5
6
COMPONENT
VIDEO OUT
DVD
OPTICAL COAXIAL
AUDIO
OUT
Y
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
R
R
S-VIDEO
PB/
CB
L
IN
VIDEO IN VIDEO OUT
OUT
PR/
CR
R
OUT
12 11 10
2.
3.
5.
7.
7
useful only in
DVD mode.
8.
Note: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
7
Français
VIDEO OUT jack (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
equipment with a standard video cable.
9. VIDEO IN jack (LINE1) (DVD/VCR)
Use to connect external equipment with a standard
video cable.
10. S-VIDEO OUT jack (DVD only)
Use to connect the S-Video input of a TV monitor, AV
receiver or other equipment with an S-Video cable.
11. AUDIO OUT jacks (DVD only)
Use to connect a TV monitor, AV receiver or other
equipment with standard audio cables.
12. DIGITAL AUDIO OUT (OPTICAL/COAXIAL)
jacks (DVD only)
Use to connect an AV receiver, Dolby Digital decoder,
DTS decoder or other equipment with digital input
jacks with a digital coaxial cable or a digital optical
cable.
Español
6.
9 8
Others
4.
AC Power Cord (DVD/VCR)
Connect to a standard AC outlet to supply power to this unit.
S-VIDEO IN jack (LINE1) (DVD only)
Use to connect the S-Video output of external equipment with an S-Video cable.
COMPONENT VIDEO OUT jacks (DVD only)
Use to connect a TV monitor with component video
inputs with component video cables.
AUDIO IN jacks (LINE1) (DVD/VCR)
Use to connect external equipment with standard
audio cables.
AUDIO OUT (L/R) jacks (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
equipment with standard audio cables.
ANTENNA IN jack (DVD/VCR)
Use to connect an antenna.
ANTENNA OUT jack (DVD/VCR)
Use to connect an antenna cable to pass the signal
from the ANTENNA IN to your TV monitor.
• These jacks are
VCR functions
1.
Changing the SETUP menu
Rear Panel
DIGITAL
AUDIO OUT
Editing
1
Playing discs
20.
7
Recording
17.
8
Press to stop the proceeding timer recording in DVD.
SELECT button (DVD/VCR)
Press to select the component you wish to operate.
DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD to VCR) duplication
which you set in the SETUP menu.
CHANNEL L / K button (DVD/VCR)
Press to change the channel up and down.
Display (DVD/VCR)
Refer to “Guide to Displays on the front panel” on page 12.
Remote control sensor (DVD/VCR)
Receive signals from your remote control so that you
can control the unit from a distance.
RECORD button (VCR)
Press once to start a recording. Press repeatedly to
start a One-Touch Recording.
PLAY button (VCR)
Press to start playback.
STOP/EJECT button (VCR)
EJECTbutton-Press to remove the tape from the unit.
STOP button-Press to stop the tape motion.
Press to stop the proceeding timer recording in VCR.
F.FWD button (VCR)
Press to rapidly advance the tape, or view the picture
rapidly in forward during playback. (Forward Search)
REW button (VCR)
Press to rewind the tape, or to view the picture rapidly
in reverse during the playback mode. (Rewind Search)
Getting started
POWER button (DVD/VCR)
Press to turn the unit on and off.
If timer programmings have been set, press to set the
unit in timer-standby mode. Press to cancel the timer
standby mode, then turn the unit on.
2. Cassette compartment (VCR)
Insert a tape here.
3. A OPEN/CLOSE button (DVD)
Press to open or close the disc tray.
4. VCR SELECT indicator
This indicator appears when the VCR output mode is selected.
5. DVD SELECT indicator
This indicator appears when the DVD output mode is selected.
6. Disc tray (DVD)
Place a disc when open.
7. AUDIO (L/R) input jacks (LINE2) (DVD/VCR)
Use to connect external equipment with standard audio cables.
8. VIDEO input jack (LINE2) (DVD/VCR)
Use to connect external equipment with a standard video cable.
9. S-VIDEO input jack (LINE2) (DVD only)
Use to connect the S-Video output of external equipment with an S-Video cable.
10. RECORD button (DVD)
Press once to start a recording.
Press repeatedly to start a One-Touch Recording.
11. PLAY button (DVD)
Press to start or resume play.
12. STOP button (DVD)
Press to stop playback or recording.
L - AUDIO - R
DVD
15 14 13 1211 10 9
1.
Connections
VIDEO
S-VIDEO
VCR
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 8
Before you start
Functional overview (cont’d)
Remote Control
OPEN/
CLOSE
POWER
17
1
.@/:
VCR Plus+
2
DEF
ABC
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
18
3
4
SPACE
ZOOM
5
7
CLEAR/
REC
C.RESET MONITOR
AUDIO
DISPLAY
6
MENU/LIST
19
TOP MENU
21
8
20
22
9
RETURN
SETUP
23
10
VCR
VIDEO/TV
SLOW
REC
SPEED
DVD
25
11
REC/OTR
12
26
27
CH
SKIP
13
STOP
28
PLAY
REW
14
24
FWD
PAUSE
29
30
15
16
1. POWER button (DVD/VCR)
Press to turn the unit on and off.
If timer programmings have
been set, press to set the unit
in timer-standby mode. Press
to cancel the timer standby
mode, then turn the unit on.
2. VCR Plus+ button
(DVD/VCR)
Press to set a timer recording
with the VCR Plus+ programming system.
Press to display the timer
program setting menu.
3. SEARCH MODE button (VCR)
Press to call up the index or
time search menu.
4. CM SKIP button (DVD)
During playback, press to skip
30 seconds.
5. ZOOM button (DVD)
During playback, press to
enlarge the picture on the
screen.
6. CLEAR/C.RESET button
(DVD/VCR)
• DVD mode
Press to clear the password once
entered, to cancel the programming for CD, to clear the selecting marker number in the marker
setup mode or to clear the program once entered in the timer
recording setting mode,etc.
• VCR mode
Press to reset the tape counter.
8
7. REC MONITOR button (DVD)
Press to check the video to be
recorded before attempting.
8. MENU/LIST button (DVD)
Press to display the Disc menu.
Press to change ORIGINAL
and PLAYLIST on the TV
screen.
(VR mode only)
9. K / L / { / B buttons
(DVD/VCR)
Press to select items or settings.
10. RETURN
button
(DVD/VCR)
Press to return to the previously displayed menu screen.
11. VCR button
Press to activate the remote
control in VCR mode. (Refer
to page 9.)
Press to select the VCR output mode.
12. SLOW button (VCR)
During playback, press to view
the video tape in slow motion.
13. SKIP H button (DVD)
During playback, press to skip to
the previous chapter or track.
Also during pause, press to play
reverse step by step.
SKIP G button (DVD)
During playback, press to skip to
the next chapter or track.
Also during pause, press to play
forward step by step.
14. REWE button (DVD/VCR)
• DVD mode
During playback, press to play
fast reverse or during pause,
press to play slow reverse.
• VCR mode
Press to rewind the tape or
to view the picture rapidly in
reverse during the playback
mode.
15. STOP C button
(DVD/VCR)
Press to stop playback or
recording.
16. PAUSE F button
(DVD/VCR)
Press to pause play or
recording.
17. OPEN/CLOSE A button (DVD)
Press to open or close the
disc tray.
18. Number buttons (DVD/VCR)
Press to select channel numbers.
Press to select a title/chapter/track
on display or a TV channel.
Press to enter the VCR Plus+
programming number.
Also press to enter values for
the settings in the SETUP menu.
19. DISPLAY button (DVD/VCR)
Press to display or change the
on-screen display.
20. AUDIO button (VCR)
During playback a HiFi video
tape, press to change the
AUDIO OUT setting “HIFI”
and “MONO”.
21. TOP MENU button (DVD)
Press to display the top menu.
22. ENTER button
(DVD/VCR)
Press to confirm or select
menu items.
23. SETUP button (DVD/VCR)
Press to display the setup menu.
During DVD playback, press and
hold for more than 3 seconds
to switch to the progressive
scanning mode or the interlace
mode.
24. VIDEO/TV button (DVD/VCR)
Press to select VIDEO or TV
position.
25. DVD button
Press to activate the remote
control in DVD mode. (Refer
to page 9.)
Press to select the DVD output mode.
26. REC SPEED button
(DVD/VCR)
Press to switch the recording
speed.
27. REC/OTR button (DVD/VCR)
Press once to start a recording. Press repeatedly to start
a One-Touch Recording.
28. CH K / L buttons (DVD/VCR)
• DVD mode
Press to change the channel
up and down.
• VCR mode
Press to change the channel
up and down.
Press to adjust the tracking
during playback or in slow
motion of the tape. Also
while playback is in still mode,
you can adjust the picture
blurred vertically.
29. FWD D button
(DVD/VCR)
• DVD mode
During playback, press to play
fast forward or during pause,
press to play slow forward.
• VCR mode
Press to rapidly advance the
tape or view the picture rapidly
in forward during playback.
30. PLAY B button
(DVD/VCR)
Press to start or resume play.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 9
Before you start
Keep in mind the following when using the remote
control:
• Make sure that there is no obstacle between the
remote control and the remote sensor on the
unit.
• Use within the operating range and angle as
shown.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the
remote sensor of the unit.
• Remote control for different devices can interfere
with each other. Avoid using remote control for
other equipment located close to the unit.
• Replace the batteries when you notice a fall off in
the operating range of the remote control.
1
2
3
Within about
23feet (7m)
POWER
REW
F.FWD
STOP/EJ
ECT
PLAY
RECOR
D
Playing discs
Note:
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the following:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together,
although they may look similar, different batteries
may have different voltages.
• Make sure that the plus and minus ends of each
battery match the indications in the battery compartment.
• Remove batteries from equipment that is not going
to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or disassemble batteries.
OPEN/C
LOSE
CHANN
EL
DUBBIN
G
SELECT
STOP
VCR
DVD
PLAY
RECOR
D
S-VIDEO
VIDEO
L-
AUDIO
-R
60˚
Remote
control
Editing
VCR/DVD recorder Switching
SELECT button
VCR MODE
OPEN/CLOSE
OPEN/
CLOSE
POWER
POWER
CHANNEL
REW
F.FWD
STOP/EJECT PLAY
SELECT
DUBBING
RECORD
STOP
PLAY
RECORD
S-VIDEO
VCR
VIDEO
L - AUDIO - R
DVD
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
DVD MODE
SPACE
CLEAR/
REC
C.RESET MONITOR
AUDIO
MENU/LIST
Press the DVD button on the remote control.
(Verify that the DVD SELECT indicator is lit.)
VCR functions
VCR Plus+
ZOOM
DISPLAY
TOP MENU
SELECT
RETURN
DVD
DVD button
VCR button
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Español
DVD SELECT
indicator
Others
VCR
Note
• Pressing only the SELECT button on the
front panel DOES NOT switch the mode of
the remote control.You MUST select the
correct mode on the remote control.
• Pressing the SETUP or the VCR Plus+ button switches the unit to the DVD mode.
Changing the SETUP menu
Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with the SELECT button.
Press the VCR button on the remote control.
(Verify that the VCR SELECT indicator is lit.)
Recording
Install two AA batteries (supplied) matching the
polarity indicated inside battery compartment of the
remote control.
Getting started
Using a remote control
Connections
Installing batteries in the remote control
Before you start
Functional overview (cont’d)
VCR SELECT
indicator
Français
9
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 10
Before you start
Functional overview (cont’d)
Guide to On Screen Menu
This unit uses the following types of display for most operations. SETUP/DISC/CD menu,Title list, and DISPLAY, which allows you to change the playing status of disc during play. DISPLAY also gives you some disc
information for checking the status of the disc.
SETUP/DISC/CD menu
Press SETUP button to display the setup main menu, then choose either of SETUP/DISC/CD by pressing { / B
buttons.Then, press ENTER button to display each menu.
This provides entries to all main functions of the unit.
“SETUP” is available only in
the Stop mode.
“DISC” is available only when a DVD-R/RW
disc is inserted into the unit.
When a DVD-Video disc (commercially available),
a new DVD-R disc or the finalized DVD-R disc is
inserted into the unit, you cannot select “DISC”.
Setup Menu
1
2
3
Disc
CD Playback Mode
Edit
Random Play
Format
Program Play
Finalize
Disc Protect OFF
4
CD Playback Mode
Disc Setting
Setup
5
6
“CD” is available only when
an Audio CD disc or a CDR/RW disc with MP3 files is
inserted into the unit.
ON
1 2 3 4
1 2
Playback Setting
1. Playback:
To set up the unit to play discs as
you prefer.
2. Recording:
To set up the unit to record to
discs or tapes as you prefer.
3. Display:
To set up the OSD screen as you
prefer.
4. Select Video:
To choose a line input to record
to DVD discs from other video
equipment.
5. Clock:
To set up the clock of the unit as
you need.
6. Channel:
To make the channel setting of
the unit as you prefer.
10
1. Edit:
Turns on a title list, (When a disc
with VR mode is inserted,
'Original' or 'PlayList' is available.),
which shows the recorded titles
on the disc.
2. Format:
Allows you to erase all of the
recorded content on the disc.
The disc will be completely blank.
3. Finalize:
Allows you to finalize a disc
recorded titles.
4. Disc Protect (VR mode
only) :
Allows you to protect a disc from
accidental editing or recording.
1. Random Play:
To set the random play programming.
2. Program Play(Audio CD
only):
To set the program playing.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 11
Before you start
Before you start
Functional overview (cont’d)
DISPLAY menu
DVD
Details are on page 46.
1
1
1
00:00:00
DVD-RW
: Search
: Audio
: Subtitle
: Angle (except VR mode)
: Repeat
: Marker
: Noise Reduction
: Zoom
: Spatializer
Recording
4
5. Each icon means:
Video mode
SP 1:25 Rem.
5
CH 1
Getting started
Press DISPLAY button to call up
the display menu.This menu will
give you the information on the
playing disc. Some operations are
available while disc is playing.
1. Indicates a disc type and a
format mode.
Note:
In some descriptions on this
manual, only one disc type is
indicated as an example.
2. Indicates a recording mode
and possible recording time
left.
3. Indicates a current channel
number.
4. Indicates a title number, chapter number and the time
elapsed of disc play.
Connections
DVD mode
First:
2
3
Playing discs
Editing
VCR
Press DISPLAY button to call up
the display menu.
1
2
0:00:00
HIFI
3
4
5
Others
SP
VCR functions
CH21
1. Playback status of the current
tape.
2. Indicates a current channel
number and an audio status of
the program.
3. Indicates a recording speed
only five seconds.
4. Indicates a Tape Counter.
5. Audio status of the current
tape.
Changing the SETUP menu
VCR mode
First:
Español
Français
11
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 12
Before you start
Functional overview (cont’d)
Guide to Displays on the front panel
4
2
1
3
7
6
5
1. Current status of the unit
: Appears when a disc or a
tape play is paused.
: Appears when playing a
disc or a tape.
: Appears when the timer
programming has been
set and is proceeding.
: Appears during recording
process.
:
Appears during repeat
play.
:
Appears when a tape is in
the unit.
2. Disc type and Current
status of the unit
: Appears when an audio CD
or a disc with MP3 files is
inserted in the disc tray.
: Appears when a DVD disc
is inserted in the disc tray.
Appears when the timer
recording is proceeding in
DVD.
Appears when DVD is in
the timer recording standby mode.
:
Appears when a DVD-R disc
is inserted in the disc tray.
:
Appears when a DVDRW disc is inserted in
the disc tray.
: Appears when the timer
recording is proceeding in
VCR.
Appears when VCR is in
the timer recording standby mode.
:
Appears during VCR to DVD
duplication process.
:
Appears during DVD to VCR
duplication process.
Display message
1
2
3. Recording speed
Indicates the recording speed of
the disc or the tape.
4. Title/Track and Chapter
mark
: Appears when indicating
a title/track number.
: Appears when indicating
a chapter number.
5. Displays the following
• Playing time / remaining time
• Current title / chapter / track
number
• Recording time
• Clock
• Channel number
• VCR tape counter
• OTR remaining time
6.
7.
: Appears in the afternoon with the clock
displaying.
:
Appears when the progressive scan system is
activated.
1. Appears when the disc tray is
opening.
3
4
2. Appears when the disc tray is
closing.
3. Appears when a disc is loading
in the disc tray.
4. Appears when recording data
is writing on to the disc.
12
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 13
Connections
Before you start
Connection to a TV
Antenna
Antenna
(Back of TV)
Cable
Signal
3
or
Connections
(Back of TV)
Cable
Signal
or
Connect
RF Cable
(supplied)
1
COMPONENT
VIDEO OUT
DVD
DIGITAL
AUDIO OUT
AUDIO
OUT
OPTICAL COAXIAL
Y
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
R
R
Getting started
Disconnect
S-VIDEO
PB/
CB
L
IN
VIDEO IN VIDEO OUT
2
OUT
PR/
CR
R
Connect
OUT
(Back of this unit)
4 Plug in the AC power cord of this unit.
Basic Audio
Method 1
Method 2
Good picture
Better picture
Recording
Make one of the following connections, depending on the capabilities of your existing equipment.
Method 3
Best picture
TV
VIDEO IN
Playing discs
AUDIO IN
COMPONENT
VIDEO IN
S-VIDEO IN
Y
PB/CB
PR/CR
S-Video
cable
(commercially
available)
This unit
Component
Video cables
(commercially
available)
Editing
Video
cable
(supplied)
Audio cable
(supplied)
DVD
COMPONENT
VIDEO OUT
AUDIO
OUT
L
Y
L
L
P B/
CB
L
IN
R
R
VIDEO IN VIDEO OUT
PB/
CB
R
OUT
PR/
CR
R
Y
S-VIDEO
S-VIDEO
VIDEO OUT
OUT
PR/
CR
OUT
or
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
DVD
COMPONENT
VIDEO OUT
DVD
DIGITAL
AUDIO OUT
OPTICAL COAXIAL
AUDIO
OUT
Y
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
R
R
S-VIDEO
P B/
CB
L
IN
VIDEO IN VIDEO OUT
AUDIO
OUT
L
OUT
Changing the SETUP menu
DVD
DVD
L
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
COMPONENT
VIDEO OUT
DVD/VCR
DVD/VCR
AUDIO OUT
PR/
CR
R
OUT
R
only in DVD mode.
VCR functions
• These jacks are useful
AUDIO OUT
Note
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
Español
more than 3 seconds
during DVD playback
[Interlace mode]
[Progressive scanning mode]
13
Français
If your TV is compatible with 525p (480p) progressive scanning and you want
to enjoy that high quality picture;
You must select the connection Method 3 above and progressive scanning mode.To set
the mode, press and hold the SETUP button on the remote control for more than 3 seconds during DVD playback, so that “P.SCAN” will appear on the display of this unit.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode. Make sure that no “P.SCAN” is on the display of this unit.
If not, press and hold the SETUP button on the remote control for more than 3 seconds
during DVD playback, so that “P.SCAN” on the display of this unit will disappear.
Others
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted
due to the copy protection system.
• Method 2 and method 3 are only useful in DVD mode.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 14
Connections
Connection to a cable box or satellite box
Connection A
(Cable box or
Satellite box)
DVD
S-VIDEO
AUDIO
DIGITAL
AUDIO OUT
COMPONENT
VIDEO OUT
OUT
(Back of this unit)
DVD/VCR
ANTENNA
IN
Y
IN
OPTICAL COAXIAL
PB
L
OUT
IN
R
OUT
RF Cable
(supplied)
PR
OUT
Cable
Signal
(Back of TV)
Select this connection when you want to view or record a scrambled channel.With this connection, channels cannot be
changed on this unit.You can view or record ONLY the channels you have selected on the cable box or the satellite box.
• While you are recording, only the recorded channel can be viewed.
• If you use the VCR Plus+ programming system, set the Cable/TV channel to 03 or 04 (Cable Box/DBS output
channel) for every VCR Plus+channel in the Channel Line-Up Chart.You must set the Cable Box/DBS to the
channel you want to record; leave the Cable Box/DBS on for the timer recording. (Refer to page 20.)
To select channels of the cable box or satellite box
1) Turn on this unit by pressing POWER button.Then, press the CHANNEL buttons to select channel 3 or 4
(the same channel as the output channel of the cable box or satellite box).
• If noise appears on the TV screen, press VIDEO/TV button on the remote control.
• If you use the channel 4, you will need to change this unit’s RF output to channel 4. Refer to “RF converter
output” on page 104.
2) At the TV, select channel 3 or 4 (the same channel as you have selected at step 1).
3) At the cable box or satellite box, select the channel you want to view or record.
Connection B
DIGITAL
AUDIO OUT
(Back of this unit)
DVD
AUDIO
S-VIDEO
DVD/VCR
COMPONENT
VIDEO OUT
OUT
ANTENNA
IN
Y
Cable
Signal
OPTICAL COAXIAL
PB
L
IN
R
(Cable box or
Satellite box)
OUT
PR
OUT
RF Cable (supplied)
IN
OUT
RF Cable
(Back of TV)
Select this connection when you want to change channels on this unit.With this connection, you may watch
one channel while recording another.
• You may not view or record a scrambled channel.
To select channels of the cable box or satellite box
1) At the cable box or satellite box, select channel 3 or 4 (the same channel as this unit’s RF output channel.)
• Refer to “RF converter output” on page 104.
2) At the TV, select the same channel as the output channel (3 or 4) of the cable box or satellite box.
3) Turn on this unit by pressing POWER button. Then select the channel you want to view or record.
• If noise appears on the TV screen, press VIDEO/TV button on the remote control.
To playback a DVD disc or a tape
Before trying to playback DVD or tape, you MUST steps 1) to 2) above.
• Refer to “Playback” on pages 47-48, 98.
To view one channel while recording another
1) While you are recording on this unit, press VIDEO/TV button.
2) At the cable box or satellite box, select the channel you want to view.
Note to the Cable TV System Installer :
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the
National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the
cable ground shall be connected to the grounding system of the building, as close to the point of cable
entry as possible.
14
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 15
Connections
Before you start
Connection to an Audio System
• When you change the connections, all devices should be turned off.
• Refer to each owner’s manual for further information on other devices.
Method 1
Method 2
Dolby Digital decoder, DTS
decoder, MD deck or DAT deck
Analog audio
input jacks
AUDIO
OPTICAL
or
Digital audio
input jacks
Audio Coaxial
Digital cable
(commercially
available)
Getting started
Audio Optical
Digital cable
(commercially
available)
Audio cable
(supplied)
COAXIAL
Connections
Stereo system
This unit
L
Recording
DIGITAL
AUDIO OUT
DVD/VCR
AUDIO OUT
AUDIO OUT
DVD
DIGITAL
AUDIO OUT
OPTICAL COAXIAL
R
AUDIO
OUT
L
R
Editing
(usefull only in
DVD mode)
Changing the SETUP menu
VCR functions
Others
Note
• If output is Dolby Digital encoded audio, connect
to a Dolby Digital decoder and set “Dolby Digital”
to “Stream” for the “Digital Out” setting in the
SETUP menu. (Refer to pages 94-95.)
• If output is DTS encoded audio, connect to a DTS
decoder and set “DTS” to “ON” for the “Digital Out”
setting in the SETUP menu. (Refer to pages 94-95.)
• The audio source on a disc in a Dolby Digital 5.1
channel surround format cannot be recorded as
digital sound by an MD or DAT deck.
• Unless connected to a Dolby Digital decoder or a DTS
decoder, set “Dolby Digital” to “PCM” and “DTS” to “OFF”
for the “Digital Out” setting in the SETUP menu. Playing a
DVD using incorrect settings may generate noise distortion
and may also damage the speakers. (Refer to pages 94-95.)
• Set “Dolby Digital” to “PCM” for the “Digital Out”
setting in the SETUP menu for connecting to an
MD deck or DAT deck. (Refer to pages 94-95.)
• By hooking this unit up to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Dolby Digital 5.1
channel surround sound as heard in the movie theaters.
• By hooking this unit up to the DTS decoder, you can enjoy
5.1 channel surround system which reproduces the original
sound as truthfully as possible. 5.1 channel surround system
is developed by the Digital Theater System, Inc.
Playing discs
or
DVD
Español
Optical cable (not supplied)
Français
• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a
diameter of 15 cm or more when storing them.
• Use a cable which is 3 m or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.
15
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 16
Getting started
Easy DVD recording
The following will help you to understand easily how to record to DVD discs.
Note:
Make sure batteries are in the remote control and you have connected this unit and the TV correctly.
Step 1: Choose a disc type
There are several types of recordable
DVD discs to choose from. Choose a
recordable DVD disc type based on
your playing/recording/editing requirements. See “DVD disc type” below.
This unit can record on the following type of discs only.
Step 2:
Insert a blank
disc
1
2
3
Turn on the unit
Open the disc tray
Close the disc tray
Remote Control
(or)
1
OPEN/
CLOSE
POWER
* This unit cannot record on the following discs.
• DVD-R General Ver 2.0 / 8x
• DVD-RW Ver 1.2 / 2-4x CPRM compatible
For example, when you want to
record repeatedly on the same disc,
or when you want to edit the disc
after recording, select the
rewritable DVD-RW type disc.
When you want to save recordings
without any alteration, a nonrewritable DVD-R can be your
choice.
DVD disc types
Step 3:
Select the
Recording speed
VCR Plus+
.@/:
ABC
1
Select the DVD
mode
2
Select the recording
speed
MENU/LIST
TOP MENU
RETURN
SETUP
2
1
DEF
SEARCH
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
OPEN/
CLOSE
POWER
VCR Plus+
.@/:
ABC
3
PLAY
REW
FWD
2
PAUSE
DEF
SEARCH
SP 2:01 Rem.
Loading
This operation may
take a while to be
recognized.
Format the disc
Insert the disc in the unit.
Then format the disc from
SETUP menu.Video format
(Video mode) or Video
recording format (VR mode)
will be available depending on
the disc type inserted.
This is necessary to prepare the disc for recording. Details are on pages
30-32.
* When you format, the entire
contents on that disc will be
erased.
16
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 17
Getting started
Before you start
Easy DVD recording (Cont’d)
Step 4:
Select the desired
channel
Step 5:
Record to DVD
discs
TOP MENU
VIDEO/TV
DVD
REC
SPEED
REC/OTR
SKIP
OPEN/
CLOSE
POWER
VCR
SLOW
CH
STOP
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
Connections
MENU/LIST
Step 6:
Stop the Record
PLAY
REW
FWD
PAUSE
RETURN
CLEAR/
REC
C.RESET MONITOR
AUDIO
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
DISPLAY
Getting started
SPACE
ZOOM
SETUP
58%
STOP
CH
SKIP
STOP
REW
Writing to Disc
PLAY
PLAY
FWD
Recording
CH 1
This operation may take
a while to be completed.
I
You can select the title you want to play from a displayed menu and
immediately start to play. Recorded contents are very accessible on
a disc, the procedure is really simple as you choose a title on a
chapter from the menu screen.
Start Rec.
Title 1
Stop/Start
Stop Rec.
Playing discs
Hint 1: Play the recorded contents
Title 2
What are titles and chapters?
Editing
The contents of DVD disc are generally divided into titles.Titles may
be further subdivided into chapters.
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Hint 2: Edit the recorded disc
You can edit the following from a title list.
• Putting names on titles
• Setting pictures for thumbnails (VR mode)
• Setting/clearing chapter markers
• Deleting parts of titles or scenes (VR mode)
Original and Playlist (VR mode)
You can edit the recordings in Playlist without changing the original recordings. A Playlist does not take up
much disc space.
What “Original” or “Playlist” is for?
Others
Throughout this manual, you will find Original and Playlist to refer to the actual content and the edited version.
• Original content refers to what’s actually recorded on the disc.
• Playlist content refers to the edited version of the disc; how the Original content is to be played.
VCR functions
Title Delete :This deletes an entire scene permanently from the disc.
Scene Delete :This allows a user to edit within a specific scene (ex. commercials).
Changing the SETUP menu
You will find editing discs very easy.This unit offers convenient edit functions, which are possible only with
DVD-R/RW discs.
Finalizing a Disc
Español
• This will allow a disc that is recorded on our unit to be played back on a different DVD player- without
finalization it will not be playable on another player.
• After finalizing a disc if the recording was in video mode, you can not edit any information that is on that disc.
• If you have recorded in VR mode on DVD-RW disc then editing is still permitted after finalizing.
Français
17
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 18
Getting started
Channel setting
All channels are stored in the unit
when purchased.We recommend
that you program available channels in your area using “Auto
Preset” in the Channel Preset of
the SETUP menu.
4
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Getting channels automatically
Setup
Press POWER button to turn
on the unit.
Turn the TV on and be sure
to select the input to which
the unit is connected.
4
5
6
Playback Setting
5
.@/:
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
VCR
DVD
Manual Preset
Guide Channel Setting
TV Audio Select
Stereo
6
Select “Auto Preset” using K
/ L buttons, then press
ENTER button.
The unit will start getting channels available in your area.
CH 18
ABC
DEF
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
SKIP
Auto Preset
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
VCR Plus+
SEARCH
MODE
CLEAR/
REC
C.RESET MONITOR
Setup > Channel Preset
3
OPEN/
CLOSE
POWER
ZOOM
1
2
1
3
7
CH
To select a channel
You can select a channel by
directly entering channel using
the Number buttons on the
remote control.
Notes for using the
Number buttons:
• When selecting cable channels
which are higher than 99,
enter channel numbers as a
three-digit number.(For example: 117, press 1,1,7)
• You must precede single-digit
channel numbers with a zero
(For example: 02, 03, 04 and
so on).
• You can select the line input
mode (“L1” or “L2”).To select
“L1” by pressing [0],[0],[1].To
select “L2” by pressing
[0],[0],[2].Details are on page 41.
Auto Presetting Now
Note
Setup Menu
7
Press SETUP button to exit.
•You can select only the channels
memorized in this unit by using
the CHANNEL buttons.
18
• If the auto presetting is cancelled during presetting, some
channels not yet preset may
not be received.
• The selection will depend on
how you receive the TV channels.
To cancel the auto presetting during scanning:
Press RETURN button or
SETUP button to cancel.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 19
Getting started
Before you start
Channel setting (cont’d)
Adding/deleting channels
4
Select “Manual Preset” using
K / L buttons, then press
ENTER button.
Manual Preset menu will appear.
1
OPEN/
CLOSE
POWER
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
Connections
The channels you no longer
receive or seldom watch can be
deleted from the memory.You also
may add channels into memory.
Setup > Channel Preset > Manual Preset
SPACE
ZOOM
2
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
2
3
4
5
6
DISPLAY
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
7
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Playing discs
Select the channel number to
add or delete.
Press { button to move to a
lower channel number.
Press B button to move to a
higher channel number.
AUDIO
MENU/LIST
Setup > Channel Preset > Manual Preset
Editing
CH18
Add
Delete
Setup
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
DVD
7
Auto Preset
Manual Preset
Guide Channel Setting
TV Audio Select
Others
VCR
Select “Add” or “Delete”
using K / L buttons, then
press ENTER button.
The channel number will be
added or deleted from the channel memory.Then next channel
number will appear so that you
can continue adding or deleting
channels.
VCR functions
3
Setup > Channel Preset
Changing the SETUP menu
6
Playback Setting
Stereo
Recording
5
Setup Menu
CLEAR/
REC
C.RESET MONITOR
CH2
Add
Delete
Getting started
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Press SETUP button to exit.
Español
Français
19
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 20
Getting started
Channel setting (cont’d)
Guide channel setting
First, fill in the boxes on this page:
1.
Write your local channel numbers in “TV Channel”
column, which you can receive in your area by channel preset.
2.
Write local TV stations corresponding TV Channel in
“Call letters” column, and write guide channel numbers corresponding call letters in “Guide Channel”
column, consulting your TV guide magazine or the
TV listings of your local newspaper.
Remember:
If your cable box or satellite box is connected as in
“Connection A” on page 14,TV Channel number
must be channel 3 or 4 for every guide channel
number.
Channel Line-Up Chart
Call letters
(Local TV station)
Guide Channel
(Guide channel number)
TV Channel
(Local channel number)
Now, compare the channel numbers you have written in the Guide Channel and TV Channel columns.
You must set all of these channel numbers that don’t
match using the following procedure before you program the automatic timer recording using the VCR
Plus+ system.
• This setting only needs to be set once, but must
be done again if you have moved to a different
area and channel numbers have been changed.
1
Setup
OPEN/
CLOSE
POWER
.@/:
VCR Plus+
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
SEARCH
MODE
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
ZOOM
Playback Setting
3
2
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
20
DEF
CM SKIP
CLEAR/
REC
C.RESET MONITOR
Setup Menu
ABC
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
Setup > Channel Preset
VCR
DVD
2
3
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
Auto Preset
STOP
Manual Preset
REW
Guide Channel Setting
TV Audio Select
PLAY
Stereo
FWD
PAUSE
1
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 21
Getting started
Before you start
Channel setting (cont’d)
6
Select “Guide Channel
Setting” using K / L buttons,
then press ENTER button.
Guide Channel Setting list will
appear.
Press SETUP button to exit
SETUP menu.
OPEN/
CLOSE
POWER
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
Guide Channel : TV Channel
CH1
1
:
:
2
CH--:
CH--3
:
4
CH--:
5
CH--6
:
CH---
AUDIO
MENU/LIST
4
5
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
6
CH
SKIP
Assign channel numbers to
the guide channels as necessary.
Look in your TV guide to see
which channel numbers should be
assigned to which guide channels.
DISPLAY
TOP MENU
STOP
PLAY
REW
FWD
PAUSE
Playing discs
Editing
1.
Choose a guide channel number using K / L buttons, then
press ENTER button.
A cursor will move to a TV channel.
If the channel you wish to set is
not on the screen, press { / B
buttons to change the displayed
page until you reach the correct
page.
2.
Select an external input (L)
or CATV/TV (CH) using { /
B buttons.
3.
Enter a TV channel using K /
L buttons or number buttons,
then press ENTER button.
The channel number is assigned.
Changing the SETUP menu
VCR functions
Others
Note
21
Français
• To erase a TV channel, press
{ button at step 5-3.
Español
To continue assigning, repeat the
steps 1-3.
Recording
5
Getting started
CLEAR/
REC
C.RESET MONITOR
Setup> Channel Preset> Guide Channel Setting
Connections
4
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 22
Getting started
Selecting the TV stereo or SAP
You can select a sound channel to
output from TV. “Stereo” has
been selected as the default.
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
4
Select “TV Audio Select”
using K / L buttons, then
press ENTER button.
Option window will appear.
Setup > Channel Preset
VCR
OPEN/
CLOSE
POWER
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
DVD
SPACE
ZOOM
Auto Preset
Manual Preset
CLEAR/
REC
C.RESET MONITOR
AUDIO
DISPLAY
Guide Channel Setting
TV Audio Select
Stereo
Stereo
SAP
MENU/LIST
5
Setup Menu
Select “Stereo” or “SAP”
using K / L buttons, then
press ENTER button.
2
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
2
3
4
5
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
6
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Stereo:
Outputs main-audio.
SAP:
(Secondary Audio Program)
Outputs sub-audio.
Refer to the item in “Glossary”
on page 106 for more information.
6
Playback Setting
Press SETUP button to exit.
Notes on TV channel audio
3
Select “Channel” using K / L
/{ / B buttons, then press
ENTER button.
Channel Preset menu will appear.
Setup > Channel Preset
VCR
DVD
Auto Preset
Manual Preset
• When you record a TV program which has Stereo and Secondary
Audio Programs on a DVD-RW/R or a tape, you have to select the
TV channel audio (Stereo or SAP) beforehand. Only the selected
channel audio will be recorded. Refer to the following table to
check an appropriate setting.
Selected
audio
Stereo
Guide Channel Setting
TV Audio Select
Stereo
SAP
Broadcast
audio
STEREO+SAP
STEREO
MONO+SAP
MONO
STEREO+SAP
STEREO
MONO+SAP
MONO
Disc/tape
recording
STEREO
STEREO
MONO
MONO
SAP
STEREO
SAP
MONO
Audio
output
STEREO
STEREO
MONO
MONO
SAP
STEREO
SAP
MONO
• As can be seen in the above table, if your TV channel audio is set to
SAP and the recorded TV program has Stereo and Secondary Audio
Programs, you can only view the program in the sub-audio.
22
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 23
Getting started
Before you start
Clock setting
Auto Clock Setting
4
Select “Auto Clock Setting”
using K / L buttons, then
press ENTER button.
Option window will appear.
Setup > Clock
.@/:
ABC
DEF
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
VCR DVD
SPACE
ZOOM
Clock Setting
Auto Clock Setting
Daylight Saving Time
OFF
Auto
Auto
Manual
Off
CLEAR/
REC
C.RESET MONITOR
AUDIO
MENU/LIST
1
5
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
6
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Playing discs
• If you do not know your
PBS channel number, select
“Auto” using K / L buttons,
then press ENTER button.
2
3
4
5
DISPLAY
TOP MENU
• If you know your PBS channel number, select “Manual”
using K / L buttons, then
press ENTER button.
Setup Menu
Clock Setting
2
Auto Clock Setting
Daylight Saving Time
VCR DVD
OFF
Set Channel
No.
Auto
Auto
CH1
Manual
Off
Changing the SETUP menu
Select “SETUP” using { / B buttons, then press ENTER button.
SETUP menu will appear.
Editing
Setup > Clock
Setup
Playback Setting
3
Press SETUP button to exit.
Setup > Clock
VCR DVD
Auto Clock Setting
Auto
Daylight Saving Time
ON
23
Français
Press POWER button to turn
off the unit.
This unit will search for the time
only when the power is off. Leave
it off for several minutes to give
this unit time to set the clock on
the display of the front panel.
Español
Clock Setting
7
Others
Select “Clock” using K / L / { / B
buttons, then press ENTER button.
Clock menu will appear.
Note
• The clock may set itself automatically after you connect the
antenna/cable signal to this
unit and plug in the power
cord. In this case, the current
time will appear on the display
of the front panel.
• If the current time is not displayed or the displayed clock
is not correct, set the clock
manually.
VCR functions
Enter your PBS channel
number using Number or K
/ L buttons, then press
ENTER button.
6
Recording
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
VCR Plus+
SEARCH
MODE
Getting started
Make sure
• The antenna/cable TV connections are correct.
• If this unit is connected to a
Cable Box or Satellite Box, select
the local PBS station on them to
set the clock automatically.
7
OPEN/
CLOSE
POWER
Connections
Set the clock before you try the
timer recording. If a Public
Broadcasting Station (PBS) is available
in your area, follow Auto Clock
Setting below. If not, follow Manual
Clock Setting on pages 24-25.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 24
Getting started
Clock setting (cont’d)
Manual Clock Setting
4
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Select “Clock Setting” using
K / L buttons, then press
ENTER button.
A clock setting window will
appear.
OPEN/
CLOSE
POWER
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
Setup > Clock
VCR DVD
CLEAR/
REC
C.RESET MONITOR
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
---/--/----(---)
--:--
Setup Menu
Press ENTER button again.
Default date will appear.
2
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
5
2
3
4
5
6
Enter the date (month / day /
year) using K / L buttons.
Press { / B buttons to move
the cursor.
Setup > Clock
AUDIO
MENU/LIST
DISPLAY
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
VCR DVD
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
JAN / 12 / 2004 (MON)
12 : 00AM
Playback Setting
3
Select “Clock” using K / L /
{ / B buttons, then press
ENTER button.
Clock menu will appear.
Setup > Clock
VCR DVD
6
Enter the time (hour /
minute) using K / L buttons.
Press { / B buttons to move
the cursor.
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
Setup > Clock
VCR DVD
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
JAN / 12 / 2004 (MON)
09 : 24 AM
Note
• Your clock setting will be lost if
either there is a power failure
or this unit has been unplugged
for more than 30 seconds
when you set the clock manually.
24
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 25
Getting started
Before you start
Clock setting (cont’d)
8
Press K / L buttons to select
AM or PM, then press ENTER
button.
Clock menu will appear, then the
settings will be activated.
Press SETUP button to exit.
Although seconds are not displayed,
they begin counting from zero.
OPEN/
CLOSE
POWER
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
Setup > Clock
Connections
7
VCR DVD
Auto Clock Setting
Auto
Daylight Saving Time
ON
AUDIO
MENU/LIST
Getting started
CLEAR/
REC
C.RESET MONITOR
Clock Setting
DISPLAY
TOP MENU
7
RETURN
SETUP
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
8
CH
SKIP
STOP
Recording
VCR
PLAY
REW
FWD
PAUSE
Playing discs
When “Auto Clock Setting” is selected to “Auto” or
“Manual”, change it to “OFF” as following steps.
5
Select “Auto Clock Setting”
using K / L buttons, then
press ENTER button.
Option window will appear.
Select “OFF” using K / L
buttons, then press ENTER
button.
Clock Setting
Auto Clock Setting
Daylight Saving Time
VCR DVD
OFF
Auto
Auto
Manual
Off
RETURN
SETUP
4
5
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
6
Press SETUP button to exit.
6
STOP
PLAY
REW
VCR functions
Setup > Clock
TOP MENU
Changing the SETUP menu
4
MENU/LIST
Editing
Repeat steps (1) to (3) in “Manual Clock Setting”.
FWD
PAUSE
Others
Español
Français
25
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 26
Getting started
Clock setting (cont’d)
Setting the daylight saving time
When Daylight Saving Time is
ON, the clock will automatically
move forward one hour on the
first Sunday in April and move
back one hour on the last Sunday
in October.
4
Select “Daylight Saving
Time” using K / L buttons,
then press ENTER button.
Daylight Saving Time options will
appear.
OPEN/
CLOSE
POWER
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
Setup > Clock
1
VCR DVD
CLEAR/
REC
C.RESET MONITOR
Clock Setting
Auto Clock Setting
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Daylight Saving Time
Auto
Select “ON” or “OFF” using
K / L buttons, then press
ENTER button.
Choose “ON” when currently
observing the daylight saving time.
2
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Clock” using K / L /
{ / B buttons, then press
ENTER button.
Clock menu will appear.
Setup > Clock
VCR DVD
Clock Setting
26
Auto Clock Setting
Auto
Daylight Saving Time
ON
DISPLAY
TOP MENU
ON
OFF
5
Setup Menu
AUDIO
MENU/LIST
6
Press SETUP button to exit.
2
3
4
5
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
1
6
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 27
Getting started
Before you start
Selecting the TV aspect ratio
Playback menu will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
OPEN/
CLOSE
POWER
.@/:
ABC
DEF
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
CLEAR/
REC
C.RESET MONITOR
4
Select “TV Aspect” using K /
L buttons, then press ENTER
button.
Option window will appear.
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
16:9 Box
Wide
4:3 Letter
8 & Scan
4:3 Pan
16:9English
Wide
2
3
4
5
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
6
CH
SKIP
STOP
Original
OFF
DISPLAY
TOP MENU
PLAY
REW
FWD
PAUSE
2
Setup
OFF
Refer to the Note on this
page.
5
Editing
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
ON
Fast Forward with Audio
Playing discs
Digital Out
Dynamic Range Control
Select a desired option using
K / L buttons, then press
ENTER button.
Changing the SETUP menu
6
Playback Setting
Recording
Setup > Playback
Setup Menu
AUDIO
MENU/LIST
Getting started
1
VCR Plus+
SEARCH
MODE
Connections
You can select the TV aspect ratio
to match the formats of what you
are playing with the unit and your
TV screen (4:3 standard or 16:9
widescreen TV).
“4:3 Letter Box” has been selected as the default.
Press SETUP button to exit.
VCR functions
3
Select “Playback” using K / L
/ { / B buttons, then press
ENTER button.
Note
Español
Français
27
Others
If you have a standard TV:
Select “4:3 Letter Box”, so that
black bars appear on the top
and bottom of the screen.
Select “4:3 Pan & Scan” for a
full height picture with both
sides trimmed.
If you have a widescreen TV:
Select “16:9 Wide”.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 28
Recording
Information on DVD recording
Information
Recording speed
This unit can record to DVD-R and DVD-RW discs.
When recording, you will need to select a recording
format between Video mode and VR mode depending on the disc format.The disc format for DVD-R
is always “Video format,” so a recording format will
be “Video mode”.
On the other hand, when recording to DVD-RW, a
recording format will be “Video mode” or “VR
mode” because a disc format is available between
“Video Recording format” and “Video format” for
DVD-RW.
You can select a recording speed among 6 options,
and the recording time will depend on the recording speed you select as follows.
Logo
Attributes
12cm, single-sided, single layer disc
Approx. max. recording time (SEP mode):
DVD-RW 600 minutes (4.7GB)
DVD-R
12cm, single-sided, single layer disc
Approx. max. recording time (SEP mode):
600 minutes (4.7GB)
* This unit cannot record on the following discs.
• DVD-R General Ver 2.0/8x
• DVD-RW Ver 1.2/2-4x CPRM compatible
About Video mode and VR (Video Recording)
mode
Video mode is the same recording format as DVDVideo discs purchased locally, so that you can play in
most DVD players.To play in other DVD players,
you will need to finalize (see page 44). If not finalized, you can play, record additionally or edit discs
recorded in Video mode with this unit.
VR (Video Recording) mode is a basic recording
format for DVD-RW.You can record and edit
repeatedly.
DVD players with
are capable of playing
DVD-RW recorded in VR mode.
Disc type
Disc format
Functions
Video mode
Playing, limited recording,
limited editing
Video
DVD-RW
DVD-RW VR mode
VR
DVD-RW
Video mode
DVD-R
28
DVD-R
Playing, recording,
Original/Playlist editing
Playing, limited recording,
limited editing
Recording Recording
Video/Sound Quality
time *
speed
XP (1H)
60 min
SP (2H)
120 min
LP (4H)
240 min
EP (6H)
360 min
SLP (8H)
480 min
SEP (10H) 600 min
* This table is designed for a new single-sided 12cm
disc as the standard.The recording time are estimates and actual recording time may differ.
* The audio and video quality is getting poorer as
the recording time becomes longer.
Restrictions on recording
You cannot record copy-protected video using this
unit. Copy-protected video includes DVD-Video
discs and some satellite broadcasts.
If copy-protected material is encountered during a
recording, the unit will pause or stop automatically
and an error message will be displayed on-screen.
Video that is “copy-once only” can only be recorded
using a DVD-RW disc in VR mode with CPRM (see
below).
When recording a TV broadcast or through an
external input, you can display copy control information on screen.
What is “CPRM”?
CPRM is a copy protection system with scramble system regarding the recording of “copy
once” broadcast programs. CPRM stands for
Content Protection for Recordable Media.
This unit is CPRM compatible, which means
that you can record copy-once broadcast programs, but you cannot then make a copy of
those recordings. CPRM recordings can only be
made on DVD-RW discs formatted in VR
mode, and CPRM recordings can only be played
on players that are specifically compatible with
CPRM.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 29
Recording
Information on copy control
Some satellite broadcasts include copy-protected
information. For recording these, refer to the following.
VR
DVD-RW
After recording, you must finalize a disc in order to
play on any other unit. (Refer to page 44.)
Connections
Disc type / format
Making discs playable in other DVD
player (Finalize)
Copy-free Copy-once Copyprohibited
ver.1.1
ver.1.1 CPRM compatible
Playable
L - AUDIO - R
ver.1.1
ver.1.1 CPRM compatible
DVD-R
ver.2.0
Video
Recordable
Not Recordable
Not Playable
After finalizing:
• Once DVD-R/RW (Video mode) is finalized, you
cannot record additionally or edit.
• Even if DVD-RW (VR mode) is finalized, you can
record additionally to or edit.
• When DVD-R/RW (Video mode) is finalized, title
menu will be created automatically.
To play in other DVD players, finalize discs recorded on this unit with the following condition.
Mode
DVD-R
ver.2.0
Video mode
DVD-RW
ver.1.1
ver.1.1 CPRM compatible
Video mode
VR mode
Editing
Disc type
Playing discs
• The audio and video quality gets poorer as the
Recording time becomes longer.
• This unit cannot record CD-R or CD-RW discs.
• DVD-R/RW and CD-R/RW discs recorded on a
personal computer or a DVD or CD recorder
may not play if the disc is damaged or dirty or if
there is dirt or condensation on the unit’s lens.
• If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play because
of the settings of the application software used
to create the disc. (Check with the software publisher for more detailed information.)
• Discs recorded in Video mode on this unit cannot record additionally using other DVD
recorders.
DVD player
Recording
Note
This Unit
Getting started
DVD-RW
Before you start
Information on DVD recording (cont’d)
Changing the SETUP menu
VCR functions
Others
Español
Français
29
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 30
Recording
Formatting a disc
Settings for the recording format to a blank disc
Video
VR
DVD-RW
DVD-RW
When inserting a blank disc, the
unit starts to initialize the blank
disc.
After that, you can record to the
disc with the recording format
selected in SETUP menu.
You are allowed to set a specified
time for chapter marks.
3
OPEN/
CLOSE
POWER
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
Setup > Recording
DVD-RW Recording Format
Auto Chapter
DVD
CLEAR/
REC
C.RESET MONITOR
Video mode
10 minutes
AUDIO
MENU/LIST
DISPLAY
TOP MENU
Timer Programming
Dubbing Mode
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
VCR
DVD
2
3
4
5
4
Select “DVD-RW Recording
Format” using K / L buttons,
then press ENTER button.
Option window will appear.
Setup > Recording
Setup Menu
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
DVD
mode
DVD-RW Recording Format Video
VR mode
VR
mode
Auto Chapter
10 minutes
Timer Programming
Dubbing Mode
2
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
Playback Setting
30
VCR
DVD
Video mode
DVD Player Compatibility mode.
VR mode
Editing possibility mode.
Note
Video mode has been selected as
the default.
5
Select “Video mode” or “VR
mode” using K / L buttons,
then press ENTER button.
The recording mode will be set.
• The recording format setting
is effective only for DVD-RW
discs.You cannot change the
recording format on a DVD-R
disc. DVD-R discs will always
be in Video mode.
• You cannot mix two formats on one DVD-RW disc.
When you load a disc once
recorded before, the
recording format cannot be
changed even if you change
it in SETUP menu.
• When inserting a blank
DVD+R or DVD+RW disc,
the error message ("Disc
Error") will appear.This unit is
not compatible with a
DVD+R/RW disc.
• PLAYLIST will be created
automatically when recording
on DVD-RW in VR mode.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 31
Recording
Before you start
Formatting a disc (cont’d)
6
OPEN/
CLOSE
POWER
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
DVD-RW Recording Format
Auto Chapter
Timer Programming
Dubbing Mode
DVD
VR mode
OFF
5 minutes
10
minutes
10 minutes
15 minutes
VCR DVD
30 minutes
60 minutes
CLEAR/
REC
C.RESET MONITOR
AUDIO
MENU/LIST
Getting started
Setup > Recording
Connections
Select “Auto Chapter” using
K / L buttons, then press
ENTER button.
Option window will appear.
DISPLAY
TOP MENU
6
7
RETURN
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
7
8
Recording
“10 minutes” has been selected as
the default.
SETUP
VCR
PLAY
REW
FWD
PAUSE
Playing discs
Select a desired time option
using K / L buttons, then
press ENTER button.
Chapter marks will be put as you
specified.
Editing
8
Press SETUP button to exit
SETUP menu.
Changing the SETUP menu
VCR functions
Others
Español
Note
31
Français
• The time for chapter marks is
not accurate in Video mode.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 32
Recording
Formatting a disc (cont’d)
Reformatting a disc
Video
VR
DVD-RW
DVD-RW
If you are using a DVD-RW disc,
by default it will be Video mode.
You can change this to VR mode
from SETUP menu.
1
4
OPEN/
CLOSE
POWER
Select “Yes” using { / B buttons, then press ENTER button.
Option window will appear.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
Disc
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
CLEAR/
REC
C.RESET MONITOR
MENU/LIST
Format
Disc Protect OFF ON
Yes
2
3
4
5
No
* VR mode only
5
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
CH
SKIP
STOP
PLAY
REW
Select “Yes” using { / B buttons, then press ENTER button.
Formatting will start.
2
DISPLAY
TOP MENU
Finalize
Are you sure?
Yes
No
Setup Menu
AUDIO
Edit
FWD
PAUSE
Select “DISC” using { / B buttons, then press ENTER button.
DISC menu will appear.
Disc
Edit
58%
Format
Formatting
Finalize
Disc Protect OFF ON
6
Formatting is complete.
100% will be indicated.
* VR mode only
3
Select “Format” using K / L
buttons, then press ENTER
button.
Option window will appear.
100%
Formatting
Disc
Edit
This operation may take a
while to be completed.
Format
Finalize
Disc Protect OFF ON
Yes
* VR mode only
32
No
Note
• When you reformat the disc,
the contents of the disc will
be erased.
• If you want to cancel format
at step 5, select “No”.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 33
Recording
Before you start
Basic recording
DVD-R
Video
VR
DVD-RW
DVD-RW
DVD
4
OPEN/
CLOSE
POWER
Select a desired channel to
record using CH K / L buttons or number buttons.
1
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
CH 1
This operation may take a
while to be recognized.
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
6
STOP
PLAY
REW
5
4
FWD
PAUSE
5
SP 2:01 Rem.
Press STOP C button to stop
the recording.
This operation may take a
while to be completed.
Français
33
Español
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
6
Note
• Recording starts immediately
and continues until the disc
becomes full or you stop
recording.
• When the clock setting has
not been made, the space for
a date and time of title names
in the original or playlist will
be blank.
• You cannot mix two formats on one DVD-RW disc.
When you load a disc once
recorded before, the
recording format cannot be
changed even if you change
it in SETUP menu.
• You cannot change the
recording speed during the
REC pause mode.
• You can change a channel
during the REC pause mode.
Others
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from SETUP menu.
“Video mode” has been selected
as the default. Refer to “Settings
for the recording format to a
blank disc” on pages 30-31.
To pause the recording, press
PAUSE F button. Press REC/OTR
button to restart the recording.
VCR functions
Make sure that the recording
format is set to the desired
mode.
Refer to “Formatting a disc” on
pages 30-32.
I
Changing the SETUP menu
3
Editing
Refer to “Recording speed” on
page 28.
Playing discs
Press REC/OTR button to
start recording.
I mark will be displayed for 5
seconds.
SETUP
VCR
Recording
Select a recording speed
using REC SPEED button.
2
DISPLAY
TOP MENU
RETURN
5
2
AUDIO
MENU/LIST
Getting started
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
4
Connections
Follow the steps below to record
TV programs.
First:
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 34
Recording
Basic recording (cont’d)
Checking the recording picture quality
DVD-R
Video
VR
DVD-RW
DVD-RW
You can confirm the recording picture quality with the recording
speed you have selected before
attempting to record to a DVD disc.
First:
2
OPEN/
CLOSE
POWER
Press REC MONITOR button
again to exit.
DVD
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
1
CLEAR/
REC
C.RESET MONITOR
While the unit is in STOP or
REC with a DVD disc to
record inserted, press REC
MONITOR button.
The TV program will be on the
screen in the recording picture
quality with the recording speed
you have selected.
1
2
AUDIO
MENU/LIST
RETURN
1
DISPLAY
TOP MENU
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
CH 18
Rec Monitor
XP
If you want to change the
recording speed, press REC
SPEED button repeatedly.
The recording speed will be
changed as you press the button
as shown. Refer to “Recording
speed” on page 28.
• You cannot change the recording speed during recording.
XP
SP
LP
SEP
SLP
EP
Note
• You cannot check the recording sound quality with the
Rec monitor function.
34
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 35
Recording
Before you start
One-touch timer recording
DVD-R
Video
VR
DVD-RW
DVD-RW
1
5
PQRS
TUV
WXYZ
SPACE
Press REC/OTR button, then
press REC/OTR button
repeatedly until a desired
recording time (30 minutes
to 8 hours) appears on the TV
screen.
Recording will start.
CLEAR/
REC
C.RESET MONITOR
AUDIO
MENU/LIST
RETURN
2
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
5
DISPLAY
TOP MENU
STOP
PLAY
REW
5
4
FWD
PAUSE
I
0:30
0:30
(Normal Recording) 1:00
8:00
7:30
When the unit reaches the specified time, it will turn off automatically.
Note
To cancel the one-touch timer
recording within the specified
time, press STOP C button.
This operation may take a
while to be completed.
Français
35
Español
• The remaining recording time
will appear on the display
panel during an OTR. Press
DISPLAY button to see it on
the TV screen.
• You cannot pause an OTR.
• The unit will turn off automatically under the conditions
following.
1)No space remained on the
disc.
2)When a power failure
occurs.
• If OTR is finished in DVD
during playback or REC mode
in VCR, the DVD will be in
STOP mode and the VCR
keeps the current mode.
Others
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
CM SKIP
VCR functions
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from SETUP menu.
"Video mode" has been selected
as the default. Refer to pages 3031 "Settings for the recording format to a blank disc."
MNO
Changing the SETUP menu
Make sure that the recording
format is set to the desired
mode.
Refer to "Formatting a disc" on
pages 30-32.
DEF
JKL
Editing
3
ABC
GHI
Playing discs
Select a recording speed
using REC SPEED button.
Refer to "Recording speed" on
page 28.
.@/:
ZOOM
This operation may take a
while to be recognized.
2
VCR Plus+
SEARCH
MODE
Recording
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
OPEN/
CLOSE
POWER
Select a desired channel to
record using CH K / L buttons or number buttons.
Getting started
DVD
4
Connections
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc you
are recording onto has enough
space for the time you set.
When the recording finishes the
recorder automatically goes into
standby.
First:
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 36
Recording
Timer recording
DVD-R
Video
VR
DVD-RW
DVD-RW
VCR
You can program the unit to record
up to 8 programs, up to a year in
advance. Daily or weekly program
recordings are also available.
• Be sure to set the clock before
making a timer programming.
• Insert a recordable disc or a
tape with a record tab.
4
Select “Timer Programming”
using K / L buttons, then
press ENTER button.
Timer Programming list will
appear.
You can choose the timer
programming menu by pressing VCR Plus+ button twice. In
this case, continue with step 5.
Setup > Recording > Timer Programming
Date
-------
1
Start
End
CH
DVD
VCR
OPEN/
CLOSE
POWER
Speed
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
5
Select the program which is
not set up using K / L buttons, then press ENTER button.
6
Enter the date using K / L
buttons, then press B button.
Setup Menu
Setup > Recording > Timer Programming
2
AUDIO
MENU/LIST
2
3
4
5
6
7
DISPLAY
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
DVD
Date
Start
End
CH VCR
Speed
JAN / 01 - - : - -AM - - : - -AM CH8 DVD
-------
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
e.g. January 1st
JAN/01
Daily
Setup
When pressing L button at the
current date, timer recording
mode will change as follows.
MON-SAT
MON-FRI
SAT
Playback Setting
FRI
Note
3
SUN
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
Setup > Recording
DVD-RW Recording Format
Auto Chapter
DVD
Video mode
10 minutes
Timer Programming
Dubbing Mode
VCR
DVD
DEC/31
7
Enter the time to start and
to end using K / L buttons,
then press B button.
Setup > Recording > Timer Programming
DVD
Date
Start
End
CH VCR
Speed
JAN/12 10 :00PM - - : - -AM CH8 DVD
-----
36
• If you have not set the
clock yet:
A clock setting window will
appear after step 4. Continue
with the step 4 in “Auto
Clock Setting” on page 23 or
“Manual Clock Setting” on
page 24 before making a
timer programming.
• Press { or B buttons to
move the cursor to the left
and the right in the timer
programming menu.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 37
Recording
Before you start
Timer recording (cont’d)
8
10
Select the channel number to
Select a recording speed
using K / L buttons.
Setup > Recording > Timer Programming
Date
Start
JAN/12 10:00PM
---
Setup > Recording > Timer Programming
Date
Start
JAN/12 10:00PM
---
DVD
VCR
End
CH
Speed
10:30PM CH8 DVD
9
Select a recording media
using K / L buttons, then
press B button.
Date
Start
JAN/12 10:00PM
---
DVD
End
CH VCR
Speed
10:30PM CH8 DVD
• To record on to a tape, select VCR.
• To record on to a disc, select DVD.
Press POWER button to turn off.
indicator will appear on the
front display.
1
4
2
Press VCR Plus+ button twice.
Timer Programming list will appear.
Date
Start
JAN/12 10:00PM
---
DVD
End
CH VCR
Speed
10:30PM CH8 DVD 1H
3
5
Press VCR Plus+ button to exit.
6
To stop the timer recording in process
MENU/LIST
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
Note
• After step 12, the unit will be
turned on automatically 2
minutes (For VCR recording,
10 seconds) in advance of the
recording time to start and
waits to start.Then the
recording will start at the
recording time you set.
1
6
2
5
OPEN/
CLOSE
POWER
VCR Plus+
.@/:
DEF
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
4
ABC
SEARCH
MODE
CLEAR/
REC
C.RESET MONITOR
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
4
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
Note
• Press VCR Plus+ button to
check the timer programming
in process.
When the timer recording is
in process, that program will
be red highlighted. In this case,
you cannot select any other
program.
37
Français
On the front panel of the main unit, press STOP C button to stop
the disc recording or STOP/EJECT C A to stop the tape recording.
STOP C button on the remote control is not effective.
DISPLAY
Español
Press POWER button to return
to the timer standby mode.
AUDIO
Others
Check the information on the
list you will need.
To correct the timer programming, select your desired program using K / L buttons, then
press ENTER button.
Next, correct the timer programming
using K/L/{/B buttons.
Finally, press ENTER button again.
SPACE
VCR functions
Setup > Recording > Timer Programming
To clear the timer programming,
select your desired program
using K / L buttons, then press
CLEAR/C.RESET button.
MNO
WXYZ
Changing the SETUP menu
Press POWER button so that
indicator disappears from
the front display.
JKL
TUV
Editing
Checking, canceling, or correcting the timer programming
information
GHI
PQRS
Playing discs
12
SEARCH
MODE
CM SKIP
ZOOM
8
9
10
11
DEF
Recording
Setup > Recording > Timer Programming
Press ENTER button when all
information required is
entered.
Your program setting will be
stored.
• To set another program, repeat
steps 5 to 11.
• To exit, press SETUP button.
ABC
CLEAR/
REC
C.RESET MONITOR
Refer to “Recording speed” on page
28 for DVD or page 98 for VCR.
11
.@/:
VCR Plus+
Getting started
To record from external input, L1
or L2.
DVD
End
CH VCR
Speed
10:30PM CH8 DVD 1H
OPEN/
CLOSE
POWER
Connections
record using K / L buttons,
then press B button.
12
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 38
Recording
Timer recording (cont’d)
Hints for timer recording
• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.
• If a disc is not on the tray, the DVD indicator on the front panel flashes and timer recording cannot be performed.
Please insert a recordable disc.
• If a tape with a record tab is not in the cassette compartment, the VCR indicator on the front panel flashes and timer
recording cannot be performed. Please insert a recordable tape.
• When all the timer recording is completed, the
indicator flashes.To play or eject the recorded disc (or the tape),
press POWER button first and then press PLAY B or OPEN/CLOSE A (or STOP/EJECT C A) button.
• The timer recording is not performed in DVD and VCR at the same time. If you set two programmings with the same
channel and time both in DVD and VCR, the programming that has priority will be recorded.
• During timer recording or timer standby ( indicator is on the front display), any operations on the unit will not be
available.To make these operations available, cancel the timer recording or timer standby first ( indicator disappears).
• To cancel the timer standby mode, press POWER button.
• When the Start and the End time are the same, the length of the recording will be set for 24 hours.When the disc
reaches at the end during the recording, the unit turns itself off.
• When the programmed Start and End time are earlier than the current time, the recording will be set on the same
date in the next year.
• If your programmed Start time for DVD recording is within 2 minutes from the current time, the power will turn on for recording
standby right after you turn the power off. For a videotape recording, the power will turn on shortly before the Start time.
• If a videotape ends during timer recording, the unit will stop, eject the videotape, and turn itself off.
• When two or more programmings are overlapped, “Overlap” will be displayed.
The priority of overlapped settings
This unit records the programs according to priority if the timer programmings are overlapped.The timer programming
set previously has priority.
A timer recording of lower priority will be canceled, start from the middle or stop on the way.
Check the overlapped timer programmings and change the priority if necessary.
A programming set previously has priority
When some programming have been
made at the end time of the
programming currently being recorded:
A program set previously (PROG. B) has priority.
When the starting time is the same:
A program set previously (PROG.A) has priority.
ex.1
ex. 2
PROG. A
PROG. A
PROG. B
PROG. B
PROG. C
Actual
recording
PROG. A
Actual
recording
PROG. B
When the recording time is partially overlapped:
PROG. A will start after PROG. B is complete to be recorded.
PROG. A
PROG. B
PROG. B
PROG. B
PROG. A
PROG. B
When the recording time is entirely overlapped:
PROG. A will not be recorded.
PROG. A
Actual
recording
PROG. A
Actual
recording
PROG. B
Note for DVD timer recording
• When the recording time
of two programs are overlapped, or the End time of
a program and the Start
time of another is the
same, the first 20-90 seconds of the subsequent
program will be cut off.
38
Example:
When the end time of the programming currently
being recorded and the starting time of the one to be recorded
sequentially are same:
PROG. A
PROG. B
Actual
recording
PROG. A
PROG. B
The first 20-90 seconds will be cut off.
E9460UD(EN/ SP/FR)
.qx3
04.8.20
11:00
Page 39
Recording
Before you start
Timer recording using VCR Plus+® system
DVD-R
Video
VR
DVD-RW
DVD-RW
VCR
Setup > Recording > Timer Programming
Date
Start
JAN/12 10:00PM
---------------
OPEN/
CLOSE
POWER
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
DVD
End
CH VCR
Speed
10:30PM
DVD 1H
When the Guide channel has
been assigned:
The programming you made with
VCR Plus+ system is hilighted to
check.
2
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
SKIP
3
4
Recording
CH
STOP
PLAY
REW
FWD
PAUSE
Playing discs
In stop mode, press VCR
Plus+ button.
VCR Plus+ setting menu will
appear.
Screen:
6
1
5
Setup > Recording > Timer Programming
Please enter a Plus Code No.
- - - - - - - - -
2
VCR Plus+
Press ENTER button after
you entered or confirm the
information.
Your VCR Plus+ program setting
will be stored.
5
Press VCR Plus+ button to exit.
6
Français
3
Español
Press POWER button to
return to the timer standby
mode.
Others
Please enter a Plus Code No.
1234- - - - -
4
VCR functions
Enter the PlusCode number
correctly using number buttons.
• If you want to change the setting, use K / L / { / B buttons.
Note
• Press { button to erase the
latest number entered incorrectly at step 2.
• Press CLEAR/C.RESET button
to erase all numbers entered
incorrectly at step 2.
• If you enter an incorrect
PlusCode number at step 2
or the programming is not
available, the error message
“Code Error!” will appear.
Enter the correct PlusCode
number.
Remember:
If your cable box or satellite
box is connected as in
“Connection A” on page 14,
TV Channel number must be
channel 3 or 4 for every a
guide channel number.Then,
set your cable box or satellite
box to the channel you want
to record; leave your cable
box or satellite box on for
the timer recording.
Changing the SETUP menu
Note:
When eight timer recordings have
been scheduled, the Timer
Programming list will appear
instead.
DVD
End
CH VCR
Speed
10:30PM CH8 DVD 1H
Editing
Date
Start
JAN/12 10:00PM
---------------
VCR Plus+
Getting started
1
When the Guide channel has
not been assigned:
The CH area has been selected,
then enter the channel number to
record using K / L buttons.
Connections
The VCR Plus+ system lets you
set timer recordings very simply.
Just enter the PlusCode number
listed in the TV program guide.
The date, time, and channel for
the TV program to record will set
automatically.
Before setting timer recording
using VCR Plus+ system, read
“Guide channel setting” on pages
20-21.
appear.
Press ENTER button.
The Timer Programming list will
39
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 40
Recording
Settings for an external source
Connection to an external source
Connect the external source properly to the unit by using input jacks either LINE2 (Front) or LINE1 (Rear).
When you want to record to a tape, use either DVD/VCR VIDEO IN jack (Rear) or VIDEO input jack
(Front). S-VIDEO input is useful only in DVD mode.
Use commercially available S-Video or Video cable and an Audio cable for this connection.
OUTPUT
S- VIDEO
Another source
(VCR camcorder etc.)
VIDEO AUDIO
L
R
OUTPUT
S -VIDEO
R
L
or
or
S-Video
cable
VIDEO AUDIO
Video
cable
S-Video
cable
Audio
cable
Video
cable
Audio
cable
DVD/VCR
AUDIO IN
S-VIDEO
VIDEO
DVD
or
L - AUDIO - R
L
S-VIDEO
R
IN
VIDEO IN
To LINE 1 IN
To LINE 2 IN
OPEN/CLOSE
POWER
COMPONENT
VIDEO OUT
DVD
CHANNEL
REW
F.FWD
STOP/EJECT PLAY
DIGITAL
AUDIO OUT
SELECT
DUBBING
RECORD
STOP
PLAY
AUDIO
OUT
RECORD
S-VIDEO
VCR
VIDEO
OPTICAL COAXIAL
L - AUDIO - R
Y
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
R
R
S-VIDEO
PB/
CB
L
DVD
IN
VIDEO IN VIDEO OUT
OUT
PR/
CR
R
OUT
Front of this unit
1. Press SETUP button to display SETUP/DISC
menu.
2. Select “SETUP” using { / B buttons, then
press ENTER button.
3. Select “Select Video” using K / L / { / B buttons, then press ENTER button.
Setup > Select Video
DVD
1. Press SETUP button to display SETUP/DISC
menu.
2. Select “SETUP” using { / B buttons, then
press ENTER button.
3. Select “Select Video” using K / L / { / B buttons, then press ENTER button.
Setup > Select Video
DVD
L1 (Rear)
Video In
L1 (Rear)
Video In
L2 (Front)
Video In
L2 (Front)
Video In
4. Select “L2 (Front)” using K / L buttons, then
press ENTER button.
Setup > Select Video
L1 (Rear)
L2 (Front)
DVD
Video
Video
In In
S-Video
Video In
5. Select the input jack type to connect using K /
L buttons, then press ENTER button.
If you want to use S-VIDEO input, select “S-Video In”.
If you want to use VIDEO input (Composite), select
“Video In”.
Setup > Select Video
40
Rear of this unit
DVD
4. Select “L1 (Rear)” using K / L buttons, then
press ENTER button.
Setup > Select Video
L1 (Rear)
L2 (Front)
DVD
Video
Video
In In
S-Video
Video In
5. Select the input jack type to connect using K /
L buttons, then press ENTER button.
If you want to use S-VIDEO IN, select “S-Video In”.
If you want to use VIDEO IN (Composite), select
“Video In”.
Setup > Select Video
DVD
L1 (Rear)
Video In
L1 (Rear)
S-Video In
L2 (Front)
S-Video In
L2 (Front)
Video In
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 41
Recording
Before you start
Settings for an external source (cont’d)
Recording from an external source
DVD-R
Video
VR
DVD-RW
DVD-RW
VCR
Before recording from an external source, see the instructions for the connection on page 40.
1
OPEN/
CLOSE
POWER
.@/:
ABC
DEF
GHI
JKL
MNO
2. When you want to record to the disc: Press:
Press OPEN/CLOSE A button to open the disc tray, then
place the disc to record properly.
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
This operation may take a while to be recognized.
2
3
AUDIO
MENU/LIST
DISPLAY
TOP MENU
VCR
LP
SEP
SLP
EP
SP
DVD
SLOW
REC
SPEED
REC/OTR
SKIP
7
CH
STOP
PLAY
REW
5
3
FWD
PAUSE
SLP
VCR mode
Changing the SETUP menu
DVD mode
VIDEO/TV
Editing
SP
4
SETUP
VCR
Playing discs
XP
RETURN
Recording
When you want to record to a tape: Press:
Insert the tape with a record tab into the cassette compartment.
3. Select the input of the unit which the external equipment is
connected. (L2 or L1)
•To use the input jacks on the back of this unit, select “L1” position by
pressing [0],[0],[1] on the remote control or the CH K / L buttons.
•To use the input jacks on the front of this unit, select “L2” position
by pressing [0],[0],[2] on the remote control or the CH K / L buttons.
4. Select a recording speed using REC SPEED button. Refer to
“Recording speed” on page 28 for DVD or page 98 for VCR.
Getting started
VCR Plus+
SEARCH
MODE
DVD
Connections
1. Turn the TV and the unit on, and be sure to select the input
of the TV to which the unit is connected.
5. Press REC/OTR button on the unit to start recording.
6. Press PLAY button on the external source to record from.
VCR functions
7. For disc:
Press STOP C button on the unit to stop recording.
This operation may take a while to be completed.
Others
For tape:
Press STOP/EJECT C A button on the unit to stop recording.
Español
Français
41
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 42
Recording
Dubbing Mode
DVD-R
Video
VR
DVD-RW
DVD-RW
VCR
You can copy a DVD disc to a
videotape or copy a videotape to
a DVD disc.This function will be
possible only if the DVD disc or
the tape is not copy protected.
Before starting this function, prepare for the recording on the
DVD-R/RW disc or the videotape.
Refer to pages 33-34, 98.
2
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
Setup
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
AUDIO
MENU/LIST
Playback Setting
Make sure:
• Insert a disc and a tape with a
record tab.
Note for recording to a tape:
• The tape's record tab is intact.
• The videotape is long enough to
record the DVD disc.
Note for recording to a disc:
• The DVD disc is satisfied with
the recording status. Refer to
pages 28-29.
OPEN/
CLOSE
POWER
3
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
2
3
4
DISPLAY
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Setup > Recording
DVD-RW Recording Format
Auto Chapter
DVD
Video mode
10 minutes
Timer Programming
Dubbing Mode
VCR
DVD
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
4
Select “Dubbing Mode” using
K / L buttons, then press
ENTER button.
Option window will appear.
Note
Setup > Recording
Setup Menu
DVD-RW Recording Format
Auto Chapter
VCR
DVD
Video mode
OFF
Timer Programming
Dubbing Mode
42
VCR
DVD
For VCR to DVD duplication:
• After starting VCR to DVD
duplication, the picture may be
distorted because of the auto
tracking function.
This is not a malfunction. Be
advised to playback the tape
until the picture is stabilized,
then set the starting point
which you wish to start
recording, and start VCR to
DVD duplication.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 43
Recording
Before you start
Dubbing Mode (cont’d)
VCR to DVD
DVD to VCR
OPEN/
CLOSE
POWER
5
Select “VCR ⇒ DVD” using K
/ L buttons, then press
ENTER button.
Select “VCR ⇐ DVD” using K
/ L buttons, then press
ENTER button.
.@/:
VCR Plus+
DVD-RW Recording Format
SEARCH
MODE
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
ZOOM
Setup > Recording
DVD
DVD-RW Recording Format
Video mode
OFF
Auto Chapter
Timer Programming
Dubbing Mode
VCR
Video mode
OFF
Dubbing Mode
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
Press SETUP button to exit
SETUP menu.
Press:
STOP
9
Recording
Press SETUP button to exit
SETUP menu.
Make sure to select a recording
speed using REC SPEED button.
Press:
6
CH
SKIP
6
PLAY
REW
FWD
PAUSE
7
VCR
Make sure to select a recording
speed using REC SPEED button.
Press:
7-a
DVD
7-b
Playing discs
7-a
MENU/LIST
VCR
VCR DVD
DVD
VCR DVD
6
VCR
DISPLAY
5
Timer Programming
VCR
VCR DVD
DVD
VCR DVD
AUDIO
DVD
Getting started
Auto Chapter
VCR
DEF
CM SKIP
CLEAR/
REC
C.RESET MONITOR
Setup > Recording
ABC
Connections
5
OPEN/CLOSE
Press DUBBING button on
the front of the unit.
VCR to DVD duplication will start.
9-a
F.FWD
STOP/EJECT PLAY
SELECT
DUBBING
RECORD
STOP
VCR
PLAY
RECORD
DVD
9-b
8
Note
Press DUBBING button on
the front of the unit.
DVD to VCR duplication will start.
• When you turn off the unit
after setting the Dubbing
Mode to
, the
setting will be set to
automatically.
• Dubbing Mode is available
only if the tape or disc is not
copy protected.
• You cannot change the output
mode during VCR to DVD or
DVD to VCR duplication.
9-b
Press STOP/EJECT C A button on the unit or STOP C
button on the remote control
to stop the recording.
8 9-a
Français
43
Español
For VCR to DVD duplication:
• The playback sound mode is
followed by the setting of
VCR playback sound mode on
page 100. Set the playback
sound mode to which you
wish to record to the DVD.
Others
Press PLAY B button on the
unit, and then press PAUSE
button at the point you wish
to start recording.
VCR functions
Press STOP C button on the
unit or STOP C button on
the remote control to stop
the recording.
CHANNEL
REW
Changing the SETUP menu
8
7-b
Editing
Press PLAY B button on the
unit, and then press PAUSE
button at the point you wish
to start recording.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 44
Recording
Finalizing the discs
DVD-R
Video
VR
DVD-RW
DVD-RW
You will need to finalize discs
recorded in Video mode to play in
other DVD players.
Finalizing may take several minutes up to an hour. (A disc
recorded in Video mode can take
up to 15 minutes. A disc recorded
in VR mode can take up to 60
minutes.) A shorter recording
period on the disc will require a
longer time period for finalization.
Do not unplug the power cord
during finalization.
Details are on pages 28-29.
Disc
Edit
MENU/LIST
TOP MENU
RETURN
SETUP
AUDIO
DISPLAY
Format
Finalize
Disc Protect OFF ON
Yes
2
3
4
No
* VR mode only
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
4
Select “Yes” using { / B buttons, then press ENTER button.
Finalizing will start.
STOP
4
1
CH
SKIP
PLAY
REW
FWD
PAUSE
Note
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
58%
Finalizing
To cancel finalizing, press STOP C
button.
Do you want to cancel?
Yes
No
Setup Menu
58%
Finalizing
2
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
• Finalizing discs in Video mode
automatically creates title
menus.
• Once you have finalized a disc
recorded in Video mode, you
cannot edit or record anything else on that disc.
Discs recorded in VR mode can
still be recorded and edited on
this unit even after finalized.
• When you insert a DVD-RW
disc finalized with this unit,
“Undo Finalize” will appear
instead of “Finalize”.
Disc
Edit
Select “DISC” using { / B
buttons, then press ENTER
button.
DISC menu will appear.
Disc
Edit
Format
Select “Yes” using { / B buttons,
then press ENTER button.
Finalizing is cancelled, then the
unit will be in stop mode.
5
Finalizing is complete.
Finalize
Disc Protect OFF ON
* VR mode only
3
Select “Finalize” using K / L
buttons, then press ENTER
button.
Option window will appear.
44
100%
Finalizing
This operation may take a
while to be completed.
Format
Undo Finalize
To release the finalizing for
the disc, select “Undo
Finalize” at step 3.
• If
appear when pressing
STOP buttonat step 4, you
cannot cancel finalizing
because the finalizing has
been in certain progress.
• When selecting “No” at step
4, press ENTER or RETURN
button, finalizing will be continued.
• You cannot cancel finalizing
the DVD-R disc once it has
started.
* DO NOT power off during
finalizing, this will result in
malfunction.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 45
Recording
Before you start
Setting a disc to protect
VR
DVD-RW
3
1
OPEN/
CLOSE
POWER
Select “Disc Protect OFF ➔
ON” using K / L buttons,
then press ENTER button.
Option window will appear.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
Disc
CLEAR/
REC
C.RESET MONITOR
Format
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
Finalize
Disc Protect OFF
Yes
ON
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
SKIP
Select “Yes” using { / B buttons, then press ENTER button.
A disc will be protected.
1
Recording
2
3
4
No
4
Setup Menu
AUDIO
Edit
CH
STOP
PLAY
REW
FWD
PAUSE
Playing discs
2
Select “DISC” using { / B
buttons, then press ENTER
button.
DISC menu will appear.
Writing to Disc
Edit
Format
Finalize
This operation may take a
while to be completed.
Note
• The Disc Protect setting is
available only when a disc
with VR mode is inserted.
• You can select only Disc
Protect Menu when a protected disc is inserted.
VCR functions
To cancel the disc protect:
• When you insert a disc protected with this unit, “Disc
Protect ON → OFF” will
appear instead of “OFF →
ON”.
Changing the SETUP menu
Disc Protect OFF ON
Editing
58%
Disc
Getting started
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Connections
To prevent accidental recording,
editing or erasing the titles, you
can protect them from DISC
menu.
Disc
Others
Edit
Format
Finalize
Disc Protect ON
Yes
OFF
No
Français
45
Español
To release the protect for the
disc, select “Disc Protect ON
→ OFF” at step 3, then select
“Yes”.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 46
Playing discs
Information on DVD play
Before you attempt to play DVD discs, read the following information.
Playable discs
Region codes
This unit is compatible to play the following discs.
To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as
described below. Discs that have the following logos
will play on the unit. Other Disc types are not guaranteed to play.
This unit has been designed to play DVD discs with
Region One (1). DVDs must be labeled for ALL
regions or for Region 1 in order to play on this unit.
You cannot play DVDs that are labeled for other
regions. Look for the symbols below on your DVDs.
If these region symbols do not appear on your
DVD, you cannot play that DVD in this unit.
Disc
Logo
DVD VIDEO
The number inside the globe refers to region of the
world. Region 1 represents the United States,
Canada, Bermuda, the U.S.Virgin Islands and small
regions near Australia.
A DVD labeled for a specific region can only play on
the unit with the same region code.
DVD-RW (VIDEO/VR mode)
DVD-R (VIDEO mode)
CD-DA (AUDIO CD)
Hint for DVD playback
The contents of DVD disc are generally divided into
titles.Titles may be further subdivided into chapters.
CD-R (CD-DA FORMAT, MP3 files)
Start Rec.
Stop/Start
Stop Rec.
CD-RW (CD-DA FORMAT, MP3 files)
Color systems
Title 1
DVDs are recorded in different color systems
throughout the world.The most common color systems are NTSC (which is used primarily in the
United States and Canada), PAL and SECAM.
This unit uses NTSC, so DVDs you play must be
recorded in the NTSC system.You cannot play
DVDs recorded in other color systems.
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Title 2
Guide to displays
First:
DVD
Press DISPLAY button to call up
the display menu.This menu will
give you the information on the
playing disc. Some operations are
available while disc is playing.
4
1
1
1
00:00:00
DVD-RW
Video mode
SP 1:25 Rem.
5
46
CH 1
2
3
1. Indicates a disc type and a
format mode.
2. Indicates a recording speed
and possible recording time
left.
3. Indicates a current channel
number and an audio status of
the program.
4. Indicates a title number, chapter number and the time
elapsed of disc play.
5. Each icon means:
: Search
: Audio
: Subtitle
: Angle (except VR mode)
: Repeat
: Marker
: Noise Reduction
: Zoom
: Spatializer
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 47
Playing discs
Before you start
Basic playback
Playback
DVD-R
Video
VR
DVD-RW
DVD-RW
VR mode:
1
1
4
3
JAN/1 1:00AM
JAN/1 2:00AM
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
5
JAN/1 3:00AM
CLEAR/
REC
C.RESET MONITOR
JAN/1 4:00AM
MENU / LIST button
2
1
JAN/1 12:00AM
4
JAN/1 1:00AM
3
RETURN
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
JAN/1 2:00AM
5
4
SETUP
VCR
1
CH
SKIP
JAN/1 3:00AM
DISPLAY
TOP MENU
JAN/1 4:00AM
STOP
6
PLAY
REW
FWD
PAUSE
Playing discs
3
5
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playback will start.
Editing
6
Press STOP C button to stop
playback.
Note
This operation may take a
while to be recognized.
To eject the disc, press
OPEN/CLOSE A button to open
the disc tray, then remove the disc
before turning off the unit.
• For DVD-R (Video mode)
and DVD-RW (Video mode)
discs which are already finalized, a title list will be displayed instead of thumbnails.
VCR functions
Press TOP MENU button to
display the title menu.
You can change “Original” or
“Playlist” of VR mode using
MENU / LIST button.
Video mode:
Title Menu
1 JAN/1
12:24AM
CH96
XP
2
3
4
5
6
7
Title List
4
JAN/1 3:00AM
3
JAN/1 1:00AM
JAN/1 2:00AM
5
JAN/1 4:00AM
47
Français
• You can resume play from
where you stopped playing
the disc. (Resume play)
Refer to page 51 for details
about resume play.
• Some discs may start playing
automatically.
Español
JAN/1 12:00AM
1
2
Others
8
1
Changing the SETUP menu
disc
tray
guide
4
Recording
Press OPEN/CLOSE A button to open the disc tray.
The disc tray will open.
1
2
AUDIO
MENU/LIST
4
5
2
6
SPACE
ZOOM
Playlist
Place the disc onto the disc
tray with its label facing up
and make sure to align the
disc to the disc tray guide.
VCR Plus+
Getting started
Press POWER button, then
press DVD button.
When you are playing a DVD, turn
the TV on and be sure to select
the input to which the unit is connected.
JAN/1 12:00AM
1
2
Connections
1
Original
OPEN/
CLOSE
POWER
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 48
Playing discs
Basic playback (cont’d)
DVD-V
CD
MP3
1
Press POWER button, then
press DVD button.
When you are playing a DVD or
an audio CD, turn the TV on and
be sure to select the input to
which the unit is connected.
2
Press OPEN/CLOSE A button to open the disc tray.
The disc tray will open.
4
Press PLAY B button to start
1
playing.
Playback will start.
If you are playing a DVD-Video
disc, a menu may appear.
Refer to pages 49-50 for details
about a disc menu.
.@/:
VCR Plus+
GHI
JKL
MNO
PQRS
TUV
WXYZ
5
2
SPACE
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
CH
SKIP
tray with its label facing up
and make sure to align the
disc to the disc tray guide.
DEF
CM SKIP
ZOOM
playing.
ABC
SEARCH
MODE
CLEAR/
REC
C.RESET MONITOR
5
Press STOP C button to stop
3
Place the disc onto the disc
OPEN/
CLOSE
POWER
STOP
PLAY
REW
FWD
PAUSE
4
Note
• Some discs may start playing
automatically.
For MP3 playback
1
In stop mode, press TOP MENU
button to call up the MP3 menu.
List of MP3 Files
DISC NAME
FOLDER NAME 1
FOLDER NAME 2
FOLDER NAME 3
FOLDER NAME 4
FOLDER NAME 5
FOLDER NAME 6
1 FILE NAME 1
2 FILE NAME 2
1/2
• To exit the menu, press TOP
MENU button again.
2
Press K / L buttons to select a
desired folder (group) or track,
then press ENTER button.
When selecting track:
Playback will start.
When selecting the folder:
The files in the folder will appear.
Press K or L button to select the
track you want, then press ENTER
button.
48
• When selecting a folder, press
PLAY B, ENTER or B button
to go to the lower hierarchy.
• Press s button or RETURN
button to go to the previous
hierarchy.
• Press STOP C button to return
to the first item.
Hints for MP3 files:
• Folders are known as Groups,
files are known as Tracks.
• Folders are accompanied by
icon.
• MP3 files are accompanied by icon.
Reproduction will start from the
selected track and go to the
next one in turn.
• The system can recognize up to 255
groups (or folders) and up to 255 tracks.
• The name of the group and track
can be displayed in up to 32 characters. Unrecognizable characters
will be replaced with asterisks.
• If there are no files in the folder,
“No Files” will be displayed.
This unit recommends the files
recorded under the following circumstances:
• Sampling frequency: 44.1kHz or 48kHz.
• Constant bit rate: 112kbps - 320kbps.
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
2
2
AUDIO
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
CH
SKIP
2
DISPLAY
MENU/LIST
STOP
PLAY
REW
FWD
PAUSE
Note
• The audio source of MP3 files
cannot be recorded as digital
sound by an MD or DAT deck.
• Files whole extension other
than “.mp3 (MP3)” will not be
listed in the MP3 menu.
• Some unplayable folders or
tracks may be listed in the
MP3 menu due to the
recording status.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 49
Playing discs
Before you start
Basic playback (cont’d)
Playing discs using the disc menu
DVD-V
Press MENU/LIST button.
The DVD main menu will appear.
.@/:
ABC
DEF
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
1
2
3
K / L / { / B buttons:
Moves the cursor around screen.
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
2
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
Enter button:
Selects the currently highlighted
menu option.
2
STOP
PLAY
REW
FWD
PAUSE
Playing discs
If the feature is not available,
may appear on the TV screen.
VCR Plus+
SEARCH
MODE
Recording
1
MENU/LIST button:
Displays a DVD disc menu which
varies with the disc and may be
the same as the ‘Title menu.’
OPEN/
CLOSE
POWER
Select an item using K / L /
{ / B buttons, then press
ENTER button to confirm.
Continue this step to set up all
the features you want or to start
playing the disc from the menu.
Getting started
DVD
2
Connections
A DVD disc contains a disc menu
that describes the contents or
allows you to customize the playback. For example, the menu may
offer choices for subtitle languages, special features, or chapter
selection.
Sometimes these are displayed
automatically when you start playback, otherwise only appear when
you press MENU/LIST button.
First:
Number buttons:
Selects a numbered menu option
(some discs only). Press ENTER
button after.
Editing
3
Press MENU/LIST button to
exit the menu.
Changing the SETUP menu
VCR functions
Others
Español
Note
Français
• Menus vary among discs.
Refer to the information
accompanying the disc for
details.
49
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 50
Playing discs
Basic playback (cont’d)
Playing discs using the title menu
DVD-V
Some DVDs have a title menu,
which lists the titles available on
them. It helps you to start playback at a specific title.
First:
DVD
1
Press TOP MENU button.
The title menu will appear.
If the feature is not available,
may appear on the TV screen.
2
OPEN/
CLOSE
POWER
Select a title to play using the
K / L / { / B buttons, then
press ENTER button.
Playback will begin at the title you
selected.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
TOP MENU button:
Displays the ‘Title menu’ of a
DVD disc which varies with the
disc.
AUDIO
MENU/LIST
DISPLAY
TOP MENU
2
RETURN
K / L / { / B buttons:
Moves the cursor around screen.
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
2
3
CH
SKIP
Enter button:
Selects the current highlighted
menu option.
2
STOP
PLAY
REW
FWD
PAUSE
Number buttons:
Selects a numbered menu option
(some discs only). Press ENTER
button after.
3
Press TOP MENU button to
exit the title menu.
Note
• The TOP MENU button will
not always be active with all
DVDs.
• Menus vary among discs.
Refer to the information
accompanying the disc for
details.
50
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 51
Playing discs
Before you start
Special playback
Resume play
Video
DVD-V
DVD-R
DVD-RW
MP3
CLEAR/
REC
C.RESET MONITOR
You can resume play from where
you stopped playing the disc last.
1
During playback, press STOP
C button.
The resume message will appear.
Screen:
MENU/LIST
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
1
2
DISPLAY
STOP
PLAY
REW
FWD
PAUSE
2
Recording
To cancel the resume play and
start playing the disc from the
beginning, press STOP C button
the second time while the playback is stopped.
AUDIO
Note
Resume ON
Getting started
Press PLAY B button.
In a few seconds, playback will
resume from the point at which it
stopped last.You can resume play
at the same point even if you turn
off the unit.
Connections
CD
DVD-RW
SPACE
ZOOM
2
VR
Playing discs
• For MP3 files, playback will
resume from the beginning of
the track at which playback
was stopped.
Fast forward / Fast reverse
DVD-R
Video
VR
DVD-RW
DVD-RW
CD
MP3
MENU/LIST
Editing
DVD-V
TOP MENU
1
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
SKIP
CH
STOP
FWD
REW
x20
REW
FWD
x5
REW
FWD
Normal
speed
playback
REW
FWD
x2
REW
FWD
x20
REW
1
FWD
PAUSE
1
1
Note
Français
51
Español
• Forward/reverse speed will be
indicated with icons as follows.
Forward (Approx. Speed)
x2:
x20:
x40:
Reverse (Approx. Speed)
x5:
x20:
x40:
Others
For Audio CDs, approximate speed is fixed at x8 with sound.
For MP3 files, approximate speed is fixed at x16.
To return to the normal playback, press PLAY B button.
x40
REW
VCR functions
x40
FWD
PLAY
Changing the SETUP menu
During playback, press D or E button.
Every time you press D or E button, approximate speed will be
changed as follows. (For DVD discs, the sound will be output during
playback in fast forward of x2 only if you set “Fast Forward with Audio”
to “ON” for the “Playback” setting in the SETUP menu.)
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 52
Playing discs
Special playback (cont’d)
Skipping TV commercials during play
DVD-R
Video
VR
DVD-RW
DVD-RW
e.g. Press CM SKIP button once
You can skip TV commercials by
pressing CM SKIP button, so that
you can enjoy the recorded programs without interrupting.
OPEN/
CLOSE
POWER
CM Skip
30 sec.
1
1
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
During playback, press CM
SKIP button.
Normal playback will start at 30
seconds ahead from the point you
press CM SKIP button.
Every time you press CM SKIP
button, the searching point will be
extended by 30 seconds ahead.
You can press up to 6 times (180
seconds).
AUDIO
MENU/LIST
DISPLAY
TOP MENU
(forwarding 30 seconds.)
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
B
STOP
PLAY
REW
FWD
Playback will restart automatically.
PAUSE
Pause
Video
DVD-V
DVD-R
DVD-RW
VR
DVD-RW
CD
MP3
1
2
OPEN/
CLOSE
POWER
Press PLAY B button to
resume play.
During playback, press
PAUSE F button.
Playback will pause and sound will
be muted.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
AUDIO
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
PLAY
REW
1
52
DISPLAY
MENU/LIST
FWD
PAUSE
2
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 53
Playing discs
Before you start
Special playback (cont’d)
Step by step playback
Video
DVD-V
DVD-R
DVD-RW
2
VR
1
DEF
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
AUDIO
MENU/LIST
RETURN
2
DISPLAY
TOP MENU
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
1
3
3
Playing discs
Press PLAY B button to
resume play.
Slow forward / Slow reverse play
DVD-V
DVD-R
Video
VR
DVD-RW
DVD-RW
MENU/LIST
TOP MENU
RETURN
SETUP
x1/4
REW
FWD
x1/8
REW
FWD
x1/16
REW
FWD
Pause
REW
FWD
x1/16
REW
FWD
x1/8
VIDEO/TV
DVD
REC
SPEED
REC/OTR
CH
SKIP
x1/2
STOP
1
1
PLAY
REW
FWD
PAUSE
1
1
Note
Español
Français
53
Others
• Forward/reverse speed will be
indicated with icons as follows.
Forward (Approx. Speed)
x1/16:
x1/8:
x1/2:
Reverse (Approx. Speed)
x1/16:
x1/8:
x1/4:
VCR functions
To return to the normal playback, press PLAY B button.
REW
VCR
SLOW
Changing the SETUP menu
During playback, press PAUSE k button, then press D or E
button.
Every time you press D or E button, approximate speed will be
changed as follows. (The sound will remain mute.)
Editing
1
FWD
Recording
To play step by step backward:
Press SKIP H button repeatedly.
Every time you press the button,
the playback will go backward by
one frame.
ABC
GHI
Getting started
During playback, press
PAUSE F button.
Playback will pause and sound will
be muted.
Press SKIP G button
repeatedly.
The playback will advance one
frame (or step) at a time when
you press the skip button with
the sound muted.
.@/:
Connections
DVD-RW
VCR Plus+
SEARCH
MODE
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 54
Playing discs
Special playback (cont’d)
Zoom
.@/:
VCR Plus+
Video
DVD-V
DVD-R
DVD-RW
VR
DVD-RW
1
During playback, press
ZOOM button.
Zoom menu will appear.
Screen:
1
1
01:23:45
2
Select a desired zoom factor
to zoom using { / B buttons,
then press ENTER button.
The zoom area will be displayed.
1
DEF
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
VIDEO/TV
VCR
DVD-Video
ABC
SEARCH
MODE
2
3
DVD
REC
x1.2
x1.5
Note
x2.0
3
B
There are four options
(x1.0,x1.2,x1.5 and x2.0), these
are displayed excluding the current zoom rate.
Select a desired zoom position
using K / L / { / B buttons, then
press ENTER button.
The zoom play will start.
• When selecting a smaller factor
than the current one, the zoom
area will not be displayed.
• To remove the zoom menu, press
ZOOM button again at step 1.
• To cancel the zoom function,
select x1.0 using { / B buttons,
then press ENTER button.
Spatializer setting (Virtual surround)
OPEN/
CLOSE
POWER
Video
DVD-V
DVD-R
DVD-RW
1
VR
1
01:23:45
DVD-Video
ON
OFF
DVD-RW
1
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
1
01:23:45
DVD-Video
CLEAR/
REC
C.RESET MONITOR
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
3
Select a desired option using
K / L buttons, then press
ENTER button.
Your setting will be activated.
ON: Outputs the virtual surround
sound.
OFF: Outputs the original sound.
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
2
3
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
2
Select
icon using { / B
buttons, then press ENTER
button.
Virtual surround menu will
appear.
54
Note
• This feature is not available for
some discs.
• Select “OFF” at step 3 if the
sound is distorted.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 55
Playing discs
Before you start
Special playback (cont’d)
Marker Setup
Video
DVD-V
DVD-R
DVD-RW
VR
3
OPEN/
CLOSE
POWER
This feature allows you to assign
a specific point on a disc to be
called back later.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
1
DVD-Video
01:23:45
4
To return to the marker later,
select the desired marker
number using { / B buttons,
then press ENTER button.
CLEAR/
REC
C.RESET MONITOR
AUDIO
MENU/LIST
RETURN
1
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
Recording
2
3
4
DISPLAY
TOP MENU
Getting started
1
Select a desired marker number using { / B buttons.
When it reaches the desired
point, press ENTER button.
Connections
CD
DVD-RW
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Playing discs
2
1
1
2
DVD-Video
01:23:45
3
4
5
Changing the SETUP menu
1
6
1
2
01:23:45
3
4
5
6
Note
Audio CD
Español
Français
55
Others
• To clear a marker, select the
marker number to be cleared,
then press CLEAR/C.RESET
button.
• All markers will be erased
when you operate these operations listed below.
– Opening the disc tray.
– Turning off the power.
– Recording to a recordable
disc.
– Changing the mode between
Original and Playlist. (VR mode)
• You can mark up to 6 points.
VCR functions
Screen for CD:
1
Editing
Select
icon using { / B
buttons, then press ENTER
button.
Marker setup menu will appear.
Screen for DVD:
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 56
Playing discs
Search
Title/Chapter search
Video
DVD-V
DVD-R
DVD-RW
VR
Using SKIP H / G buttons
Using DISPLAY button
1
1
During playback, press SKIP
G button to skip the current title or chapter and
move to the next.
The title or chapter will move
forward one at a time.
During playback, press DISPLAY button.
The display menu will appear.
Screen:
To go back to the previous title
or chapter, press SKIP H button.The title or chapter will move
backward one title at a time.
1
1
01:23:45
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
1
2
2
Title:
Enter a desired title number
to search using K / L buttons
or number buttons, then
press ENTER button.
Title search will start.
Chapter:
To move to ‘C’ for chapter, press
B button.
Enter a desired chapter number to search using K / L buttons or number buttons, then
press ENTER button.
Chapter search will start.
2
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
DVD-Video
Select
icon using { / B
buttons, then press ENTER
button.
‘T’ for title will be highlighted.
56
OPEN/
CLOSE
POWER
DVD-RW
1
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 57
Playing discs
Before you start
Search (cont’d)
Track search
CD
MP3
Using DISPLAY button
1
1
To go back to the previous track,
press SKIP H button.The track
will move backward one at a time.
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
01:23:45
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
1
Audio CD
Select
icon using { / B
buttons, then press ENTER
button.
‘T’ for track will be highlighted.
1
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
SKIP
Recording
2
2
3
CH
STOP
PLAY
REW
FWD
PAUSE
Playing discs
3
Editing
Enter a desired track number
to search using K / L buttons
or number buttons, then
press ENTER button.
Track search will start.
Changing the SETUP menu
Time search
OPEN/
CLOSE
POWER
Video
DVD-V
DVD-R
DVD-RW
VR
CD
DVD-RW
1
1
1
01:23:45
2
VCR Plus+
Select
icon using { / B
buttons, then press ENTER
button.
‘T’ for title or track will be highlighted.
To move to the clock icon, press
B button.
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR/
REC
C.RESET MONITOR
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
DVD-Video
VIDEO/TV
DVD
REC
SPEED
REC/OTR
2
3
Note
57
Français
• Time search function is available only in the same track or
title.
Español
Audio CD
Enter a desired time to
search using K / L buttons or
number buttons, then press
ENTER button.
Time search will start.
VCR
SLOW
1
Others
Screen for CD:
01:23:45
ABC
CM SKIP
ZOOM
3
1
.@/:
SEARCH
MODE
VCR functions
During playback, press DISPLAY button.
The display menu will appear.
Screen for DVD:
Getting started
During playback, press SKIP
G button to skip the current track and move to the
next.
The track will move forward one
at a time.
OPEN/
CLOSE
POWER
Connections
Using SKIP H / G buttons
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 58
Playing discs
Repeat/Random/Program play
Repeat play
Video
DVD-V
DVD-R
DVD-RW
VR
CD
DVD-RW
MP3
1
During playback, press DISPLAY button.
The display menu will appear.
1
1
01:23:45
DVD-Video
2
Select
icon using { / B buttons, then press ENTER button.
Repeat menu will appear.
Screen:
1
1
01:23:45
DVD-Video
OFF
Title
Chapter
A-B
3
Select a desired option to
repeat using K / L buttons,
then press ENTER button.
The selected repeat play will start.
Title:
The current title will be played
repeatedly. (DVD only)
OPEN/
CLOSE
POWER
.@/:
VCR Plus+
Chapter:
The current chapter will be played
repeatedly. (DVD only)
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR/
REC
C.RESET MONITOR
A-B:
The A-B point will be played
repeatedly.
When pressing ENTER button
while A-B is highlighted, the starting point (A) will be decided.
DEF
CM SKIP
ZOOM
All:
The current disc will be played
repeatedly. CD, MP3 and DVDRW (VR mode only)
ABC
SEARCH
MODE
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
2
3
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Press ENTER button again to
select the ending point (B).
Track:
The current track will be played
repeatedly. (CD, MP3 only)
Group:
The current group will be played
repeatedly. (MP3 only)
Note
• The A-B Repeat playback can
only be set within the current
title (for DVDs), or current
track (for Audio CDs).
• To cancel the repeat playback,
select OFF at step 2.
• You cannot select “Group”
during the random playback
of MP3 files.
Random play
CD
MP3
With this function, you can play a
disc randomly instead of playing it
in the original order.
First:
DVD
1
Press SETUP button to display SETUP/CD menu.
SETUP/CD menu will appear.
Screen:
Setup Menu
58
SPACE
ZOOM
2
Select “CD” using { / B buttons, then press ENTER button.
CD Playback Mode menu will
appear.
CLEAR/
REC
C.RESET MONITOR
2
3
CD Playback Mode
Random Play
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
Program Play
SKIP
CH
3
Select “Random Play” using
Note
K / L buttons, then press
ENTER button.
Random playback will start.
• To cancel random playback,
press STOP C button twice
during random playback.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 59
Playing discs
Before you start
Repeat/Random/Program play (cont’d)
Program play
CD
DVD
1
3
OPEN/
CLOSE
POWER
Select “Program Play” using
K / L buttons, then press
ENTER button.
Program play list will appear.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CD Playback Mode > Program Play
CLEAR/
REC
C.RESET MONITOR
-- -- -- -- -- -- -- -- -- --- -- -- -- -- -- -- -- -- --- -- -- -- -- -- -- -- -- --
Total
00:00:00
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
CH
SKIP
Select a desired track using K
/ L buttons, then press
ENTER button or B button.
A cursor will move to the next.
STOP
PLAY
REW
FWD
PAUSE
5
Playing discs
Select “CD” using { / B buttons, then press ENTER button.
CD Playback Mode menu will
appear.
RETURN
CD Playback Mode > Program Play
--
-- -- -- -- -- -- -- -- --
--
-- -- -- -- -- -- -- -- --
--
-- -- -- -- -- -- -- -- --- -- -- -- -- -- -- -- --
---
Total
Editing
07 - - - - - - - - - - - - - - - -
Recording
2
3
4
4
2
DISPLAY
TOP MENU
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
Setup Menu
AUDIO
MENU/LIST
Getting started
Press SETUP button to display SETUP/CD menu.
SETUP/CD menu will appear.
Screen:
4
Connections
You can program the disc to play
in your desired order.
First:
00:04:30
CD Playback Mode
Random Play
Changing the SETUP menu
Program Play
5
Press PLAY B button to start
program playback.
Program playback will start.
Español
Français
59
Others
• To erase tracks you selected,
press CLEAR/C.RESET button.
• You can make program settings up to 50.
• To cancel program playback,
press STOP C button twice
during program playback.
• You may also select a desired
track using Number buttons
at step 4.
VCR functions
Note
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 60
Playing discs
Selecting the format of audio and video
You can select an audio or video format as you prefer depending on
the contents of the disc you are playing.
Switching audio soundtrack
VR
DVD-V
DVD-RW
When playing a DVD-Video disc
recorded with two or more
soundtracks (these are often in
different languages), you can
switch between them anytime
during playback.
On DVD-RW discs recorded in
VR mode, you can switch to main
(L), sub audio (R) or a mix of
both (L/R).
1
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
1
01:23:45
DVD-Video
OPEN/
CLOSE
POWER
<DVD-RW VR mode>
1
1
00:00:00
DVD-RW
VR Original
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
1 Dolby Digital Dual L/R
2 Dolby Digital 2ch ----
CLEAR/
REC
C.RESET MONITOR
3
Select a desired audio soundtrack using K / L buttons,
then press ENTER button.
<DVD-Video>
Audio soundtrack will switch.
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
2
3
4
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
<DVD-RW VR mode>
Audio channel menu will appear.
Follow the step 4.
1
1
00:00:00
1 Dolby Digital Dual
2 Dolby Digital 2ch
DVD-RW
VR Original
L/R
L
R
2
Select
icon using { / B
buttons, then press ENTER
button.
Audio menu will appear.
<DVD-Video>
1
1
00:00:00
1 Dolby Digital 5.1ch English
2 Dolby Digital 2ch Japanese
60
DVD-Video
4
Select a desired audio channel using K / L buttons, then
press ENTER button.
Audio channel will switch.
Note
• Some discs will only allow
you to change the soundtrack from the disc’s menu.
Press TOP MENU button or
MENU / LIST button to display the disc’s menu.
• On DVD-RW discs recorded
in VR mode that may have
both a main and a sub audio
channel, you can switch to
main (L), sub audio (R) or a
mix of both (L/R).
• This unit CANNOT record
in both stereo and SAP
(Secondary Audio Program)
at the same time.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 61
Playing discs
Before you start
Selecting the format of audio and video (cont’d)
CD
MP3
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
Audio CD
00:00:00
.@/:
VCR Plus+
Select
icon using { / B
buttons, then press ENTER
button.
Audio menu will appear.
00:00:00
JKL
MNO
TUV
WXYZ
SPACE
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
2
3
Recording
1
GHI
PQRS
CLEAR/
REC
C.RESET MONITOR
Select a desired audio channel using K / L buttons, then
press ENTER button.
Audio channel will switch.
DEF
CM SKIP
ZOOM
3
ABC
SEARCH
MODE
Audio CD
CH
SKIP
L/R
L
R
STOP
PLAY
REW
Getting started
1
OPEN/
CLOSE
POWER
2
Connections
When playing Audio CDs or MP3
files you can switch between
stereo, just the left channel or
just the right channel.
FWD
PAUSE
Playing discs
Switching subtitles
VR
DVD-V
DVD-RW
2
OPEN/
CLOSE
POWER
VCR Plus+
.@/:
1
SEARCH
MODE
GHI
JKL
MNO
PQRS
TUV
WXYZ
01:23:45
DVD-Video
SPACE
CLEAR/
REC
C.RESET MONITOR
DVD-Video
3
MENU/LIST
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
SKIP
1
2
3
CH
Note
61
Français
• Some discs will only allow
you to change the subtitle
from the disc’s menu. Press
TOP MENU button or MENU
/ LIST button to display the
disc’s menu.
Español
When selecting “OFF,” subtitle will
disappear.
DISPLAY
Others
Select a desired subtitle language using K / L buttons,
then press ENTER button.
Subtitle will be displayed in the
selected language.
AUDIO
VCR functions
1
00:00:00
OFF
1 English
2 Japanese
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
1
DEF
CM SKIP
ZOOM
1
ABC
Changing the SETUP menu
Select
icon using { / B
buttons, then press ENTER
button.
Subtitle menu will appear.
Editing
Many DVD Video discs have subtitles in one or more languages.
The case usually tells you which
subtitle languages are available.
You can switch subtitle languages
anytime during playback.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 62
Playing discs
Selecting the format of audio and video (cont’d)
Switching camera angles
DVD-V
Some DVD Video discs feature
scenes shot from two or more
angles, check the case for details:
it should be marked with an angle
icon if it contains multi-angle
scenes.
2
OPEN/
CLOSE
POWER
Select
icon using { / B
buttons, then press ENTER
button.
Angle will switch each time you
press ENTER button.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
1
CLEAR/
REC
C.RESET MONITOR
AUDIO
MENU/LIST
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
01:23:45
1
2
RETURN
1
DISPLAY
TOP MENU
DVD-Video
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Angle icon appears when a switching camera angle is available.
Reducing block noise
Video
DVD-V
DVD-R
DVD-RW
OPEN/
CLOSE
POWER
1
VR
1
00:00:00
DVD-Video
DVD-RW
OFF
Type 1
Type 2
1
.@/:
VCR Plus+
1
1
01:23:45
DVD-Video
SEARCH
MODE
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR/
REC
C.RESET MONITOR
62
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
Select
icon using { / B
buttons, then press ENTER
button.
NR menu will appear.
AUDIO
3
Select a desired option using
K / L buttons, then press
ENTER button.
Your setting will be activated.
2
DEF
CM SKIP
ZOOM
During playback, press DISPLAY button.
The display menu will appear.
Screen:
ABC
This function reduces noise in the
playback picture.When playing
back discs recorded in long time
mode such as SLP or SEP mode,
select "Type 1" or "Type 2".
("Type 2" is more effective.)
When playing back discs with a
few noises such as DVD-Video
discs, select "OFF".
PLAY
REW
FWD
PAUSE
1
2
3
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 63
Editing
Editing discs in Video mode
Title list allows you to check the titles recorded on
the disc easily.You can choose a title to edit from this
screen and easily edit the titles as you prefer.
You can edit discs in Video mode for the following items.
Be sure that once you edit titles, they will not remain as
recorded originally.
• Deleting titles (Refer to page 65)
• Putting names on titles (Refer to pages 66-67)
• Setting or clearing chapter markers (Refer to page 68)
Disc > Edit > Original
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
5
6
JAN/1 5:00AM
JAN/1 6:00AM
4
JAN/1 4:00AM
1
Note
3
2
• Once a disc is finalized, editing the disc or
recording to the disc will not be available.
(Except DVD-RW discs in VR mode.)
• A playlist is not available with the DVD-R discs
and DVD-RW discs in Video mode.
Recording
Disc > Edit > Original
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Playing discs
JAN/1 1:00AM CH12
XP
0:01:25
8 7
6
5
Getting started
1
Connections
Guide to a title list
Before you start
Information on disc editing
4
Editing
Changing the SETUP menu
1. Titles recorded on the disc can be selected to
edit by pressing ENTER button with the cursor
on the title.
2. Protect icon, which appears when the title has
been protected.
3. The arrow icon, which means the title list
includes a next or a previous page. Press B or
{ button by following direction of the icon.
4. The menus in here for editing titles as you prefer.The available menus depends on the disc
type and the format type.
5. The details of the title, which can be changed to
the title name you will edit.
6. Time status bar of the title.
7. The selected title thumbnails from the title list.
8. Playback status of the current disc.
VCR functions
Others
Español
Français
63
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 64
Editing
Information on disc editing (cont’d)
Editing discs in VR mode
For discs in VR mode, you can edit from “Original” menu or “Playlist” menu, which is created from the
original.
Editing original titles
Editing playlists
The following items can be used to edit the original
titles.
• Deleting titles (Refer to page 69)
• Deleting parts of titles (Refer to pages 70-71)
• Putting names on titles (Refer to pages 71-72)
• Setting or clearing chapter markers (Refer to
pages 73-74)
• Setting pictures for thumbnails (Refer to pages
74-75)
• Setting titles to protect (Refer to page 76)
• Releasing titles from protecting (Refer to page 77)
You can create a playlist from original titles, so that
you can edit as you prefer without losing original
titles.
The following items you can edit with a playlist.
• Deleting titles (Refer to page 78)
• Deleting parts of titles (Refer to pages 79-80)
• Putting names on titles (Refer to pages 80-81)
• Setting or clearing chapter markers (Refer to
pages 82-83)
• Setting pictures for thumbnails (Refer to pages
83-84)
• Adding titles to a playlist (Refer to page 85)
• Deleting a playlist (Refer to page 86)
Note
• Original titles once edited will not remain as recorded originally.When you want to leave the original as
it is, edit the playlist as you prefer. (Refer to pages 78-86)
64
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 65
Editing
Before you start
Editing DVD-RW discs in Video mode
Deleting titles
Video
DVD-RW
3
Title Delete
Edit Title Name
Chapter Mark
XP
0:01:25
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
AUDIO
MENU/LIST
1
2
3
4
5
DISPLAY
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
6
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Playing discs
Finalize
DEF
JKL
Disc > Edit
1
Title Delete
Edit Title Name
Chapter Mark
JAN/ 1 1:00AM CH12
Editing
Yes
2
No
XP
0:01:25
Disc > Edit
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
5
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Disc > Edit
5
1
JAN/1 4:00AM
VCR functions
1
Changing the SETUP menu
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
Title Delete
Edit Title Name
Chapter Mark
JAN/1 5:00AM
Yes
No
Others
JAN/ 1 1:00AM CH12
Recording
4
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Format
ABC
GHI
CLEAR/
REC
C.RESET MONITOR
1
JAN/ 1 1:00AM CH12
Edit
.@/:
Getting started
Disc > Edit
1
Disc
VCR Plus+
SEARCH
MODE
ZOOM
DVD
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
OPEN/
CLOSE
POWER
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
Connections
You can delete titles which you
do not need anymore.
Be sure to know that the titles
once deleted cannot be brought
back to the disc.
When the last title in the title list
in Video mode is deleted, the disc
space to record will be increased.
First:
XP
Writing to Disc
Español
This operation may take a
while to be completed.
6
Français
After writing to disc is completed, press SETUP button
to exit DISC menu.
65
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 66
Editing
Editing DVD-RW discs in Video mode (cont’d)
Putting names on titles
Video
DVD-RW
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
First:
DVD
4
OPEN/
CLOSE
POWER
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
5
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
AUDIO
DISPLAY
Disc > Edit > Edit Title Name
1
MENU/LIST
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
ABC
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
0:01:25
Disc
Edit
5
Format
Finalize
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
1
2
3
4
5
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Disc > Edit > Edit Title Name
2
1
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
ABC
abc
123
@!?
[ Guide to edit title name ]
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
0:01:25
[Step2]: Press Number buttons following by the list
below.
Select
area for entering title names
Disc > Edit
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
When you finish entering a title
name, press ENTER button.
JAN/1 5:00AM
3
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
Disc > Edit
1
Title Delete
Edit Title Name
Chapter Mark
ABC
abc
123
@!?
<space>
<space>
0
<space>
(*1)
(*1)
1
!”#$%
&’()*
+ ,- ./ :;
<=>?
@[]^
_{|}
Press
ABC
abc
2
DEF
def
3
(*2)
(*2)
GHI
ghi
4
(*2)
JKL
jkl
5
(*2)
MNO
mno
6
(*2)
PQRS
pqrs
7
(*2)
TUV
tuv
8
(*2)
WXYZ
wxyz
9
(*2)
*1 Press
button, character set will be changed
to the " @!? " mode automatically.
to
buttons, character set will
*2 Press
be changed to the previous input mode
automatically.
To delete letters, press CLEAR button repeatedly.
Holding CLEAR button to delete all letters.
To go on to the next entering area for letters,
press
button.
You can enter up to 30 letters.
JAN/ 1 1:00AM CH12
XP
0:01:25
66
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 67
Editing
Before you start
Editing DVD-RW discs in Video mode (cont’d)
6
OPEN/
CLOSE
POWER
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
Connections
Select “Yes” using { / B buttons, then press ENTER button.
The name you entered will be
activated for the title.
SPACE
ZOOM
AUDIO
Getting started
CLEAR/
REC
C.RESET MONITOR
DISPLAY
Disc > Edit > Edit Title Name
MENU/LIST
1
ABC
abc
123
@!?
Yes
TOP MENU
6
No
RETURN
SETUP
abc
This operation may take a
while to be completed.
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
7
CH
SKIP
STOP
Recording
Writing to Disc
PLAY
REW
FWD
PAUSE
Playing discs
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
Editing
Changing the SETUP menu
VCR functions
Others
Español
Français
67
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 68
Editing
Editing DVD-RW discs in Video mode (cont’d)
Setting or clearing chapter markers
Video
DVD-RW
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can set chapter markers at a
specified time you selected for
titles with more than 5 minutes.
First:
Disc > Edit
OPEN/
CLOSE
POWER
1
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
Chapter Mark
XP
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
0:01:25
CLEAR/
REC
C.RESET MONITOR
AUDIO
DISPLAY
DVD
MENU/LIST
4
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
Disc > Edit
Disc
1
Edit
Format
Finalize
JAN/ 1 1:00AM CH12
Title Delete
OFF
Edit Title5Name
minutes
Chapter
10Mark
minutes
15 minutes
30 minutes
60 minutes
1
2
3
4
5
6
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
7
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
XP
0:01:25
5
2
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
Select a desired time using K
/ L buttons, then press
ENTER button.
Option window will appear.
Disc > Edit
1
Disc > Edit
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
Title Delete
OFF
Edit Title5Name
minutes
Chapter
10Mark
minutes
15 minutes
30 minutes
60 minutes
Yes
4
JAN/1 4:00AM
JAN/ 1 1:00AM CH12
No
XP
0:01:25
5
Note
JAN/1 5:00AM
6
3
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
Select “Yes” using { / B buttons, then press ENTER button.
Chapter markers will be added at
the specified time.
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
68
• You cannot select a time for
putting markers beyond a
length of a title.
• When recording at the
recording speed other than
XP or SEP, the length of chapters may be slightly longer or
shorter than the one specified at the step 5.
• A chapter marker may be
delayed according to the
recording content.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 69
Editing
Before you start
Editing DVD-RW discs in VR mode (Original)
Deleting titles
VR
DVD-RW
4
1
JAN/ 1 1:00AM CH12
XP
5
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
AUDIO
MENU/LIST
1
2
3
4
5
6
DISPLAY
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
7
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Playing discs
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Disc Protect OFF ON
DEF
JKL
CLEAR/
REC
C.RESET MONITOR
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
0:01:25
Finalize
ABC
GHI
Disc > Edit > Original
1
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
Editing
2
No
XP
0:01:25
Changing the SETUP menu
6
Disc > Edit
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Disc > Edit > Original
1
3
Yes
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
Español
This operation may take a
while to be completed.
Disc > Edit > Original
7
5
JAN/1 5:00AM
.
After writing to disc is completed, press SETUP button
to exit DISC menu.
Français
JAN/1 4:00AM
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect OFF ON
Others
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
4
VCR functions
Original
Recording
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Format
.@/:
Getting started
Disc > Edit > Original
1
Edit
VCR Plus+
SEARCH
MODE
ZOOM
DVD
Disc
OPEN/
CLOSE
POWER
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
Connections
When a title is deleted from an
original list in VR mode, the disc
space to record will be increased.
Be advised that the titles once
deleted cannot be brought back
to the disc.
First:
69
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 70
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
Deleting parts of titles
VR
DVD-RW
You can delete part of a title, the
disc space to record will be
increased.
Be advised that the parts once
deleted cannot be brought back
to the disc.
First:
4
Disc > Edit > Original
1
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
JAN/ 1 1:00AM CH12
XP
0:01:25
Select “Scene Delete” using
K / L buttons, then press
ENTER button.
Option window will appear.
Format
Finalize
Disc Protect OFF ON
1
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
1
2
3
4
5
6
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
XP
0:00:55
6
Press ENTER button to
decide a start point, then
press ENTER button to
decide an end point.
A cursor will move to “Preview.”
You can check a preview.
Original
3
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Disc > Edit > Original
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
70
5
JAN/1 5:00AM
ABC
DEF
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
<Preview>
Before
editing
Edited
AUDIO
MENU/LIST
Disc > Edit > Original
Disc > Edit
.@/:
CLEAR/
REC
C.RESET MONITOR
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
5
Edit
VCR Plus+
SEARCH
MODE
ZOOM
DVD
Disc
OPEN/
CLOSE
POWER
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
Start point End point
DISPLAY
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
1
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 71
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
8
Select “Delete” using K / L
buttons, then press ENTER
button.
Option window will appear.
Select “Yes” using { / B buttons, then press ENTER button.
Part of a title will be deleted.
OPEN/
CLOSE
POWER
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
1
Disc > Edit > Original
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
Yes
JAN/ 1 1:00AM CH12
1
No
CLEAR/
REC
C.RESET MONITOR
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
Yes
JAN/ 1 1:00AM CH12
XP
0:01:25
No
XP
Writing to Disc
AUDIO
MENU/LIST
7
8
DISPLAY
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
9
Recording
This operation may take a
while to be completed.
Getting started
Disc > Edit > Original
Connections
7
Note
After writing to disc is completed, press SETUP button
to exit DISC menu.
Playing discs
9
• You cannot select “Scene
Delete” when the number of
chapter markers in the original
or playlist is more than 900.
Putting names on titles
DVD
2
OPEN/
CLOSE
POWER
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
.@/:
VCR Plus+
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
Changing the SETUP menu
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
First:
Editing
VR
DVD-RW
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
AUDIO
DISPLAY
Disc > Edit
1
Disc
Original
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
SKIP
1
Others
Edit
1
2
TOP MENU
CH
Format
STOP
Finalize
Disc Protect OFF ON
PLAY
REW
VCR functions
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
MENU/LIST
FWD
PAUSE
Español
Français
71
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 72
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
3
6
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
OPEN/
CLOSE
POWER
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
Disc > Edit > Original > Edit Title Name
Disc > Edit > Original
1
2
1
JAN/1 1:00AM
JAN/1 2:00AM
4
JAN/1 3:00AM
5
JAN/ 1 1:00AM CH12 XP
JAN/1 4:00AM
JAN/1 5:00AM
0:01:25
area for entering title names
When you finish entering a title
name, press ENTER button.
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
Disc > Edit > Original
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
AUDIO
DISPLAY
MENU/LIST
3
4
5
6
7
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
8
CH
SKIP
STOP
PLAY
REW
7
FWD
PAUSE
Select “Yes” using { / B buttons, then press ENTER button.
The name you entered will be
activated for the title.
Disc > Edit > Original > Edit Title Name
JAN/ 1 1:00AM CH12
CLEAR/
REC
C.RESET MONITOR
ABC
abc
123
@!?
1
3
6
XP
1
0:01:25
ABC
abc
123
@!?
[ Guide to edit title name ]
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
123
@!?
[Step2]: Press Number buttons following by the list
below.
Select
Yes
5
No
abc
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
Disc > Edit > Original > Edit Title Name
1
ABC
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
0:01:25
ABC
abc
123
@!?
<space>
<space>
0
<space>
(*1)
(*1)
1
!”#$%
&’()*
+ ,- ./ :;
<=>?
@[]^
_{|}
Press
Writing to Disc
This operation may take a
while to be completed.
8
After writing to disc is completed, press SETUP button
to exit DISC menu.
ABC
abc
2
DEF
def
3
(*2)
(*2)
GHI
ghi
4
(*2)
JKL
jkl
5
(*2)
MNO
mno
6
(*2)
PQRS
pqrs
7
(*2)
TUV
tuv
8
(*2)
WXYZ
wxyz
9
(*2)
*1 Press
button, character set will be changed
to the " @!? " mode automatically.
to
buttons, character set will
*2 Press
be changed to the previous input mode
automatically.
To delete letters, press CLEAR button repeatedly.
Holding CLEAR button to delete all letters.
To go on to the next entering area for letters,
press
button.
You can enter up to 30 letters.
72
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 73
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
Setting or clearing chapter markers
VR
DVD-RW
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
5
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
JAN/1 4:00AM
JAN/1 5:00AM
CLEAR/
REC
C.RESET MONITOR
AUDIO
MENU/LIST
DISPLAY
TOP MENU
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc > Edit > Original
1
JAN/ 1 1:00AM CH12
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Playing discs
Disc
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
1
2
3
4
5
6
XP
Edit
0:01:25
Format
Finalize
Disc Protect OFF ON
5
Changing the SETUP menu
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Editing
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
2
Disc > Edit > Original
1
Chapter 1/1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
XP
Disc > Edit
VCR functions
0:01:25
6
Original
Español
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Select “Add” or “Delete”
using K / L buttons, then
press ENTER button.
Option window will appear.
<Add>:
Others
3
Recording
1
1
4
OPEN/
CLOSE
POWER
Getting started
DVD
Disc > Edit > Original
Connections
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can put a chapter marker
anywhere you want.
When the number of chapter
markers in the original list comes
to 999 in total, you cannot add
any more chapter markers.
First:
Disc > Edit > Original
1
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
Français
F
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
73
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 74
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
<Delete>:
Disc > Edit > Original
1
Chapter 2/2
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
<Delete>:
The chapter marker which you
selected will be deleted.
OPEN/
CLOSE
POWER
.@/:
VCR Plus+
Disc > Edit > Original
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
F
Yes
JAN/ 1 1:00AM CH12
No
1
XP
Chapter 2/2
0:01:25
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
Yes
• You cannot delete the first
chapter marker of each title.
JAN/ 1 1:00AM CH12
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
AUDIO
DISPLAY
No
MENU/LIST
TOP MENU
RETURN
SETUP
XP
Writing to Disc
7
7
Select “Yes” using { / B buttons, then press ENTER button.
<Add>:
A chapter marker will be added.
Disc > Edit > Original
1
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
This operation may take a
while to be completed.
8
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
SKIP
After writing to disc is completed, press SETUP button
to exit DISC menu.
8
CH
STOP
PLAY
REW
FWD
PAUSE
No
XP
Writing to Disc
This operation may take a
while to be completed.
Setting pictures for thumbnails
VR
DVD-RW
You can set a picture to each title for
a thumbnail. It helps you to remember the contents of the title you are
playing.The beginning picture has
been selected as the default.
First:
DVD
2
OPEN/
CLOSE
POWER
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
VCR Plus+
.@/:
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
ZOOM
1
2
Original
DEF
CM SKIP
CLEAR/
REC
C.RESET MONITOR
Disc > Edit
ABC
SEARCH
MODE
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
Disc
Edit
Format
Note
Finalize
Disc Protect OFF ON
74
• If a selected picture for a
thumbnail is deleted by deleting a part of a title, a default
picture will be selected.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 75
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
6
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Select “Yes” using { / B buttons, then press ENTER button.
A picture for thumbnail will be
set.
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
1
5
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
No
JAN/1 5:00AM
JAN/ 1 1:00AM CH12
XP
4
MNO
TUV
WXYZ
SPACE
Disc > Edit > Original
DISPLAY
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
SKIP
7
CH
STOP
PLAY
REW
FWD
PAUSE
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
5
Editing
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
This operation may take a
while to be completed.
3
4
5
6
AUDIO
MENU/LIST
Playing discs
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
JAN/ 1 1:00AM CH12
JKL
PQRS
XP
0:01:25
Changing the SETUP menu
5
VCR functions
Select “Index Picture Set”
using K / L buttons. Use SKIP
H / G, REW E, FWD D,
PLAY B and PAUSE F buttons to decide the picture
you want to select as a
thumbnail.Then press ENTER
button.
Option window will appear.
Others
Disc > Edit > Original
1
Español
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
F
Yes
JAN/ 1 1:00AM CH12
Recording
Writing to Disc
1
GHI
CM SKIP
ZOOM
Disc > Edit > Original
DEF
Getting started
1
2
ABC
SEARCH
MODE
CLEAR/
REC
C.RESET MONITOR
1
JAN/1 4:00AM
.@/:
VCR Plus+
Disc > Edit > Original
4
OPEN/
CLOSE
POWER
Connections
3
No
XP
0:01:25
Français
75
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 76
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
Setting titles to protect
VR
DVD-RW
To prevent accidental editing or
erasing the titles, you can protect
them from the original menu.
First:
DVD
4
OPEN/
CLOSE
POWER
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
.@/:
VCR Plus+
1
1
SEARCH
MODE
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
JAN/ 1 1:00AM CH12
CLEAR/
REC
C.RESET MONITOR
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
0:01:25
Disc
Edit
5
Select “Protect OFF ➔ ON”
Format
Finalize
Disc Protect OFF ON
using K / L buttons, then
press ENTER button.
Option window will appear.
Disc > Edit > Original
2
1
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
6
Disc > Edit
Select “Yes” using { / B buttons, then press ENTER button.
Disc > Edit > Original
1
Original
3
Yes
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Disc > Edit > Original
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
76
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
5
JAN/1 5:00AM
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
This operation may take a
while to be completed.
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
To protect a whole disc
(DVD-RW VR mode Only):
Select “Disc Protect” from Disc
menu, then select “Yes”.
AUDIO
MENU/LIST
1
2
3
4
5
6
DEF
CM SKIP
ZOOM
Disc > Edit > Original
ABC
DISPLAY
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
SKIP
CH
STOP
PLAY
REW
FWD
PAUSE
1
7
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 77
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
Releasing titles from protecting
VR
DVD-RW
First:
DVD
4
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
Disc Edit > Original
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
2
JAN/ 1 2:00AM CH12
CLEAR/
REC
C.RESET MONITOR
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
XP
0:01:25
Disc
“Protect ON → OFF” is selected.
Format
Finalize
Disc Protect OFF ON
5
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
7
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Playing discs
Press ENTER button.
Option window will appear.
1
2
3
4
5
6
DISPLAY
TOP MENU
Disc Edit > Original
2
2
Disc > Edit
B
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
Yes
JAN/ 1 2:00AM CH12
No
Editing
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
XP
0:01:25
Changing the SETUP menu
6
Select “Yes” using { / B buttons, then press ENTER button.
Original
Disc Edit > Original
3
Disc > Edit > Original
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 5:00AM
No
XP
Writing to Disc
This operation may take a
while to be completed.
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
Français
JAN/1 4:00AM
5
Yes
JAN/ 1 2:00AM CH12
Español
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
Others
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
VCR functions
2
Recording
Edit
AUDIO
MENU/LIST
Getting started
1
OPEN/
CLOSE
POWER
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
Connections
You are allowed to release the
titles protecting feature once protected.
77
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 78
Editing
Editing DVD-RW discs in VR mode (Playlist)
Deleting titles
VR
DVD-RW
In VR mode, even when a title is
deleted from a Playlist, the original
title will remain in an Original list.
The disc space to record will not
be increased.
First:
4
DVD
1
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc
Format
Finalize
JAN/ 1 1:00AM CH12
XP
0:01:25
/ L buttons, then press
ENTER button.
Option window will appear.
Disc Protect OFF ON
Disc > Edit > Playlist
1
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
6
Disc > Edit
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Disc > Edit > Playlist
Original
1
3
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Yes
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
This operation may take a
while to be completed.
Disc > Edit > Playlist
78
.@/:
ABC
DEF
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
CLEAR/
REC
C.RESET MONITOR
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
5
Select “Title Delete” using K
Edit
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
JAN/1 4:00AM
VCR Plus+
SEARCH
MODE
ZOOM
Disc > Edit > Playlist
4
OPEN/
CLOSE
POWER
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
5
JAN/1 5:00AM
Add New
Title
Delete
Playlist
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
AUDIO
MENU/LIST
1
2
3
4
5
6
DISPLAY
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
1
7
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 79
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Deleting parts of titles
VR
DVD-RW
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
1
Disc Protect OFF ON
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
JAN/ 1 1:00AM CH12
XP
0:01:25
5
AUDIO
MENU/LIST
1
2
3
4
5
6
DISPLAY
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Playing discs
Finalize
DEF
JKL
Disc > Edit > Playlist
1
Disc > Edit
JAN/ 1 1:00AM CH12
XP
0:00:55
Changing the SETUP menu
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Editing
2
6
VCR functions
Press ENTER button to
decide a start point, then
press ENTER button to
decide an end point.
A cursor will move to “Preview”.
You can check a preview.
Original
<Preview>
Others
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Start point End point
Español
Before
editing
Disc > Edit > Playlist
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
JAN/1 5:00AM
Edited
Français
1
Recording
Format
ABC
GHI
CLEAR/
REC
C.RESET MONITOR
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Select “Scene Delete” using
K / L buttons, then press
ENTER button.
Option window will appear.
Edit
.@/:
Getting started
Disc > Edit > Playlist
1
Disc
VCR Plus+
SEARCH
MODE
ZOOM
DVD
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
OPEN/
CLOSE
POWER
Connections
You can delete a specific part of a
title.
Even when a title is deleted from
the playlist, the original title will
remain.
The disc space to record will not
be increased.
First:
Add New
Title
Delete
Playlist
Instructions continue to the next page.
79
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 80
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Part of a title will be deleted.
7
Select “Delete” using K / L
buttons, then press ENTER
button.
Option window will appear.
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
1
Yes
JAN/ 1 1:00AM CH12
Yes
JAN/ 1 1:00AM CH12
XP
0:01:25
ABC
DEF
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
CLEAR/
REC
C.RESET MONITOR
This operation may take a
while to be completed.
9
7
8
After writing to disc is completed, press SETUP button
to exit DISC menu.
Select “Yes” using { / B buttons, then press ENTER button.
DISPLAY
TOP MENU
RETURN
SETUP
VIDEO/TV
VCR
8
AUDIO
MENU/LIST
No
XP
.@/:
ZOOM
Writing to Disc
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
VCR Plus+
SEARCH
MODE
No
Disc > Edit > Playlist
1
OPEN/
CLOSE
POWER
Disc > Edit > Playlist
DVD
9
C
Note
• You cannot select “Scene
Delete” when the number of
chapter markers in the original
or playlist is more than 900.
Putting names on titles
VR
DVD-RW
You can put names on the titles
and change the names from this
menu.
The names you put on the titles
will be displayed on a titlelist.
First:
Original/PlayList menu will appear.
Screen:
OPEN/
CLOSE
POWER
Disc > Edit
.@/:
VCR Plus+
DVD
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
AUDIO
DISPLAY
Original
1
MENU/LIST
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
1
2
3
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
Edit
Format
Finalize
Disc Protect OFF ON
Disc > Edit > Playlist
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
JAN/1 4:00AM
Select “Edit” using K / L buttons, then press ENTER button.
80
PLAY
REW
1
4
2
STOP
5
JAN/1 5:00AM
Add New
Title
Delete
Playlist
FWD
PAUSE
1
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 81
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
7
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
Select “Yes” using { / B buttons, then press ENTER button.
The name you entered will be
activated for the title.
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
ZOOM
Disc > Edit > Playlist > Edit Title Name
1
XP
ABC
abc
123
@!?
Yes
No
abc
5
Disc > Edit > Playlist > Edit Title Name
RETURN
SETUP
4
5
6
7
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
SKIP
8
CH
STOP
PLAY
REW
FWD
PAUSE
8
After writing to disc is completed, press SETUP to exit
DISC menu.
[ Guide to edit title name ]
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
0:01:25
Editing
ABC
abc
123
@!?
DISPLAY
TOP MENU
Playing discs
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
This operation may take a
while to be completed.
AUDIO
MENU/LIST
Recording
Writing to Disc
DEF
CM SKIP
CLEAR/
REC
C.RESET MONITOR
0:01:25
1
ABC
SEARCH
MODE
Getting started
JAN/ 1 1:00AM CH12
.@/:
VCR Plus+
Disc > Edit > Playlist
1
OPEN/
CLOSE
POWER
Connections
4
[Step2]: Press Number buttons following by the list
below.
Select
abc
123
@!?
<space>
0
<space>
6
(*1)
(*1)
1
!”#$%
&’()*
+ ,- ./ :;
<=>?
@[]^
_{|}
Disc > Edit > Playlist > Edit Title Name
1
ABC
abc
123
@!?
0:01:25
3
(*2)
(*2)
GHI
ghi
4
(*2)
JKL
jkl
5
(*2)
MNO
mno
6
(*2)
PQRS
pqrs
7
(*2)
TUV
tuv
8
(*2)
WXYZ
wxyz
9
(*2)
*1 Press
button, character set will be changed
to the " @!? " mode automatically.
to
buttons, character set will
*2 Press
be changed to the previous input mode
automatically.
To delete letters, press CLEAR button repeatedly.
Holding CLEAR button to delete all letters.
To go on to the next entering area for letters,
press
When you finish entering a title
name, press ENTER button.
2
def
button.
You can enter up to 30 letters.
Español
area for entering title names
abc
DEF
Others
JAN/ 1 1:00AM CH12 XP
ABC
VCR functions
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
Changing the SETUP menu
ABC
<space>
Press
Français
81
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 82
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Setting or clearing chapter markers
VR
DVD-RW
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can put a chapter marker
anywhere you want.
When the number of chapter
markers in the playlist comes to
999 in total, you cannot add any
more chapter markers.
First:
DVD
1
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
Add New
Title
Delete
Playlist
5
JAN/1 4:00AM
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
Disc > Edit > Playlist
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
XP
0:01:25
5
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Disc > Edit > Playlist
1
Chapter 1/1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
XP
0:01:25
6
Select “Add” or “Delete”
using K / L buttons, then
press ENTER button.
Option window will appear.
<Add>:
Disc > Edit > Playlist
1
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
F
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
82
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
AUDIO
DISPLAY
TOP MENU
4
Finalize
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
DEF
JKL
MENU/LIST
Format
3
ABC
GHI
JAN/1 5:00AM
Edit
Disc Setting
.@/:
CLEAR/
REC
C.RESET MONITOR
Disc
2
VCR Plus+
SEARCH
MODE
ZOOM
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc Protect OFF ON
OPEN/
CLOSE
POWER
1
2
3
4
5
6
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
1
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 83
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
<Delete>:
Disc > Edit > Playlist
1
Disc > Edit > Playlist
F
Yes
JAN/ 1 1:00AM CH12
No
1
XP
Chapter 2/2
0:01:25
7
Disc > Edit > Playlist
1
Yes
JAN/ 1 1:00AM CH12
ABC
DEF
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
No
XP
AUDIO
MENU/LIST
DISPLAY
TOP MENU
Writing to Disc
This operation may take a
while to be completed.
7
RETURN
8
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
After writing to disc is completed, press SETUP button
to exit DISC menu.
8
STOP
PLAY
REW
FWD
PAUSE
Playing discs
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
Yes
JAN/ 1 1:00AM CH12
.@/:
No
XP
Writing to Disc
Editing
This operation may take a
while to be completed.
Setting pictures for thumbnails
VR
2
VCR Plus+
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
VCR functions
You can set a picture to each title
for a thumbnail. It helps you to
remember the contents of the
title you are playing.The beginning picture has been selected as
the default.
First:
OPEN/
CLOSE
POWER
Changing the SETUP menu
DVD-RW
DVD
Disc > Edit
1
2
1
Edit
Format
Finalize
DVD
REC
SPEED
REC/OTR
1
Original
Note
• If a selected picture for a
thumbnail is deleted by deleting a part of a title, a default
picture will be selected.
83
Français
Disc Protect OFF ON
VIDEO/TV
Español
Disc
VCR
SLOW
Others
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Recording
Select “Yes” using { / B buttons, then press ENTER button.
A chapter marker will be added.
<Add>:
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
VCR Plus+
SEARCH
MODE
Getting started
• You cannot delete the first
chapter of each title.
OPEN/
CLOSE
POWER
Connections
Chapter 2/2
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
The chapter marker which you
selected will be deleted.
<Delete>:
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 84
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
3
6
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Select “Yes” using { / B buttons, then press ENTER button.
A picture for thumbnail will be
set.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
Disc > Edit > Playlist
CLEAR/
REC
C.RESET MONITOR
1
2
1
OPEN/
CLOSE
POWER
AUDIO
MENU/LIST
1
JAN/1 1:00AM
JAN/1 2:00AM
4
JAN/1 3:00AM
Add New
Title
Delete
Playlist
5
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Yes
JAN/1 4:00AM
No
JAN/1 5:00AM
JAN/ 1 1:00AM CH12
XP
Writing to Disc
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
Disc > Edit > Playlist
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
XP
0:01:25
5
Select “Index Picture Set”
using K / L buttons. Use SKIP
H / G, REW E, FWD D,
PLAY B and PAUSE F buttons to decide the picture
you want to select as a
thumbnail.Then press ENTER
button.
Option window will appear.
Disc > Edit > Playlist
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
F
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
84
DISPLAY
Disc > Edit > Playlist
3
This operation may take a
while to be completed.
3
4
5
6
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
5
7
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 85
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Adding titles to a Playlist
VR
DVD-RW
DVD
4
OPEN/
CLOSE
POWER
Select “Add New Title” using
K / L / { / B buttons, then
press ENTER button.
Original list will appear.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
1
2
1
CLEAR/
REC
C.RESET MONITOR
AUDIO
JAN/10 10:30AM
JAN/12 5:00PM
Finalize
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
6
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Playing discs
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Disc Protect OFF ON
1
2
3
4
5
Disc > Edit > Playlist > Add New Title
2
Editing
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Recording
5
Format
TOP MENU
JAN/12 8:00PM
Disc
Edit
DISPLAY
3
MENU/LIST
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Getting started
Disc > Edit > Playlist > Add New Title
1
Connections
You can add or delete a title in
the playlist as you prefer.
You can add titles to a Playlist up
to 99.
First:
58%
Writing to Disc
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
5
6
4
JAN/1 4:00AM
JAN/1 5:00AM
Changing the SETUP menu
Disc > Edit
JAN/12 8:00PM
VCR functions
Original
6
3
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
Add New
Title
Delete
Playlist
Français
JAN/1 4:00AM
5
To delete a title from Playlist,
refer to “Deleting titles” on page
78.
To delete a Playlist, refer to
“Deleting a Playlist” on page 86.
Español
Disc > Edit > Playlist
After writing to disc is completed, press SETUP button
to exit DISC menu.
Others
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
JAN/1 5:00AM
85
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 86
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Deleting a Playlist
VR
DVD-RW
A Playlist can be deleted if no
longer needed.
First:
DVD
1
4
OPEN/
CLOSE
POWER
Select “Delete Playlist” using
K / L / { / B buttons, then
press ENTER button.
Option window will appear.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc > Edit > Playlist
1
CLEAR/
REC
C.RESET MONITOR
1
2
MENU/LIST
JAN/1 1:00AM
4
Disc
JAN/1 4:00AM
JAN/1 2:00AM
5
JAN/1 5:00AM
Add New
Title
Delete
Playlist
Yes
No
Format
Finalize
5
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
DISPLAY
TOP MENU
JAN/1 3:00AM
Edit
Disc Protect OFF ON
AUDIO
3
Select “Yes” using { / B buttons, then press ENTER button.
Playlist will be erased.
After writing to disc is completed,
the unit will be in stop mode.
1
2
3
4
5
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Disc > Edit
Original
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
86
5
JAN/1 5:00AM
Add New
Title
Delete
Playlist
Note
• Deleting a Playlist will not
increase the available recording time on disc.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 87
Editing
Before you start
Editing DVD-R discs
Deleting titles
DVD-R
Disc > Edit
1
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
Chapter Mark
OPEN/
CLOSE
POWER
XP
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
Connections
0:01:25
SPACE
ZOOM
You cannot select “Chapter Mark”.
CLEAR/
REC
C.RESET MONITOR
AUDIO
Getting started
You can delete titles which you
do not need, however the disc
space to record on the disc will
not be changed.
Be sure to know that the titles
once deleted cannot be brought
back to the disc.
First:
DISPLAY
DVD
MENU/LIST
4
1
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Disc > Edit
Disc
1
Edit
Title Delete
Edit Title Name
Chapter Mark
1
2
3
4
5
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
6
CH
SKIP
STOP
Recording
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
TOP MENU
PLAY
REW
FWD
PAUSE
Playing discs
Format
Finalize
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Disc > Edit
1
Disc > Edit
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
Title Delete
Edit Title Name
Chapter Mark
Yes
4
JAN/1 4:00AM
JAN/ 1 1:00AM CH12
No
VCR functions
1
Changing the SETUP menu
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
Editing
5
2
XP
Writing to Disc
5
JAN/1 5:00AM
This operation may take a
while to be completed.
6
After writing to disc is completed, press SETUP button
to exit DISC menu.
Español
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
Others
3
Français
87
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 88
Editing
Editing DVD-R discs (cont’d)
Putting names on titles
DVD-R
You can put names on the titles
and change the names from this
menu.
The names you put on the titles
will be displayed on a titlelist.
First:
4
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
DVD
1
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
CLEAR/
REC
C.RESET MONITOR
ABC
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
0:01:25
5
To enter a title name, follow
Edit
Format
the steps of "Guide to edit
title name" on this page.
character set
Finalize
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
1
2
3
4
5
6
5
SPACE
ZOOM
Disc > Edit > Edit Title Name
Disc
OPEN/
CLOSE
POWER
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
7
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Disc > Edit > Edit Title Name
ABC
abc
123
@!?
1
2
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
Disc > Edit
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
[ Guide to edit title name ]
JAN/ 1 1:00AM CH12 XP
0:01:25
area for entering title names
When you finish entering a title
name, press ENTER button.
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
123
@!?
[Step2]: Press Number buttons following by the list
below.
Select
6
Select “Yes” using { / B buttons, then press ENTER button.
5
JAN/1 5:00AM
Disc > Edit > Edit Title Name
3
1
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
ABC
abc
123
@!?
Yes
Title Delete
Edit Title Name
Chapter Mark
abc
Writing to Disc
This operation may take a
while to be completed.
7
XP
0:01:25
You cannot select “Chapter Mark”.
88
123
@!?
0
<space>
(*1)
(*1)
1
!”#$%
&’()*
+ ,- ./ :;
<=>?
@[]^
_{|}
ABC
abc
2
DEF
def
3
(*2)
(*2)
GHI
ghi
4
(*2)
JKL
jkl
5
(*2)
MNO
mno
6
(*2)
PQRS
pqrs
7
(*2)
TUV
tuv
8
(*2)
WXYZ
wxyz
9
(*2)
*1 Press
button, character set will be changed
to the " @!? " mode automatically.
to
buttons, character set will
*2 Press
be changed to the previous input mode
automatically.
To delete letters, press CLEAR button repeatedly.
Holding CLEAR button to delete all letters.
To go on to the next entering area for letters,
press
JAN/ 1 1:00AM CH12
abc
<space>
No
Disc > Edit
1
ABC
<space>
Press
After writing to disc is completed, press SETUP button
to exit DISC menu.
button.
You can enter up to 30 letters.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 89
Changing the SETUP menu
Before you start
Tour of the SETUP menu
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
SETUP menu
Original
English
French
Set the language for audio.
Subtitle Language
OFF
English
French
Set the language for subtitle.
OSD Background
Transparency
100%
Set the background transparency of OSD
screen.
OSD Background
Color
1
2
3
35%
25%
Set the OSD screen color.
1 (Green), 2 (Blue), 3 (Red)
OSD Language
English
Français
Español
Set the language for OSD
(On Screen Display).
Screen Saver
OFF
5 minutes
10minutes
Set the time to work the screen saver on
the screen.
PCM
Set whether the sound recorded in 96kHz
will be down sampled in 48kHz.
Set the type of sound signal which outputs
from the digital audio output jack.
Set whether DTS signal will be output or
not.
Compressing the range of sound volume.
ON
OFF
Outputting the sound during play in fast
forward.
Parental Lock
ALL
level 8 to 1
Set the parental level of your DVD discs.
(Change password)
Enter the current
four-digit password
Set and change the password.
Others
ON
OFF
VCR functions
Dynamic Range
Control
Fast Forward with
Audio
Changing the SETUP menu
Auto
48kHz
96kHz
Dolby Digital
PCM
Stream
DTS
ON
OFF
Editing
Digital Out
Playing discs
4.Parental setting
Pages 96-97
Audio Language
Recording
3.Audio setting
Pages 94-95
Set the language for disc menu.
Getting started
2.Display setting
Pages 92-93
Disc Menu Language English
French
Spanish
Contents
Connections
1.Language setting
Pages 90-91
Items (highlight is the default)
Español
Note
Français
• If you change the setting in SETUP
menu, the information of contents
stays on even when the power is
switched off.
89
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 90
Changing the SETUP menu
Settings for Language
Press STOP button if you are playing a disc.
1
OPEN/
CLOSE
POWER
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
AUDIO
MENU/LIST
2
3
4
Setup Menu
2
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
4
DISPLAY
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
5
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Setup
Playback Setting
3
Select “Playback” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
4
Select a desired item using K / L buttons, then press
ENTER button.
Note
• Only the languages supported
by the disc can be selected.
• Audio Language setting may
not be available to some
discs.
• You can change or switch off
the subtitles on a DVD disc
also from the disc menu if it
is available.
90
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 91
Changing the SETUP menu
Before you start
Settings for Language (cont’d)
Disc Menu Language (Default : English)
Set the language for Disc Menu.
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Setup > Playback
DVD
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
Parental Lock
Disc Menu Language
Subtitle Language
Digital Out
DVD
4:3 Letter Box
All
English
English
French
Original
Spanish
OFF
Other
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
Getting started
Digital Out
Dynamic Range Control
Audio Language (Default : Original)
Set the Audio language.
TV Aspect
Setup > Playback
DVD
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
DVD
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
Disc Menu Language
Audio Language
Subtitle Language
Parental Lock
Disc Menu Language
Subtitle Language
Digital Out
Playing discs
Digital Out
4:3 Letter Box
All
Original
English
English
Original
French
OFF
Spanish
Other
Parental Lock
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Subtitle Language (Default : OFF)
Set the subtitle language.
Setup > Playback
Setup > Playback
DVD
Audio Language
Original
Audio Language
Subtitle Language
OFF
Subtitle Language
Parental Lock
Parental Lock
Disc Menu Language
Digital Out
DVD
4:3 Letter Box
All
OFF
English
English
Original
French
Digital Out
OFF
Spanish
Other
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
Changing the SETUP menu
Dynamic Range Control
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
If “Other” is selected, press 4-digit code using number buttons.
e
Code Input
Audio
---ON
• When you finish entering
the code, press ENTER
button. Refer to the language code table on page
105.
Others
Control
VCR functions
age
All
English
English
French
Original
Spanish
OFF
Other
Editing
TV Aspect
Disc Menu Language
4:3 Letter Box
All
English
TV Aspect
Recording
Setup > Playback
Connections
Setup > Playback
OFF
Español
5
Press SETUP button to exit SETUP menu.
Français
91
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:47
Page 92
Changing the SETUP menu
Settings for Display
Press STOP button if you are playing a disc.
1
OPEN/
CLOSE
POWER
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
AUDIO
MENU/LIST
2
3
4
Setup Menu
2
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
Setup
Playback Setting
3
Select “Display” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Display
DVD
OSD Background Transparency 35%
OSD Background Color
OSD Language
1
English
Screen Saver
10 minutes
4
Select a desired item using K / L buttons, then press
ENTER button.
92
DISPLAY
TOP MENU
1
5
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 93
Changing the SETUP menu
Setup > Display
DVD
OSD Background Color
OSD Language
1
English
Screen Saver
10 minutes
DVD
OSD Background Transparency 35%100%
85%
OSD Background Color
1
70%
OSD Language
English
50%
Screen Saver
10 minutes
35%
25%
10%
0%
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Setup > Display
DVD
Setup > Display
DVD
OSD Background Color
OSD Language
1
English
Screen Saver
10 minutes
Screen Saver
11
2
English
3
10 minutes
Setup > Display
VCR
OSD Language
OSD Language (Default : English)
Set the language for OSD.
Setup > Display
VCR
DVD
OSD Background Transparency 35%
OSD Background Transparency 35%
OSD Background Color
1
OSD Background Color
OSD Language
English
OSD Language
Screen Saver
10 minutes
Screen Saver
DVD
1
English
English
Français
10 minutes
Español
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Playing discs
OSD Background Transparency 35%
OSD Background Color
Recording
OSD Background Transparency 35%
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Getting started
OSD Background Color (Default : 1 Green)
Set the OSD screen color.
You can choose one among 1(Green), 2(Blue), and 3(Red).
Connections
OSD Background Transparency 35%
Setup > Display
Before you start
Settings for Display (cont’d)
OSD Background Transparency (Default : 35%)
Set the background transparency of OSD screen.
You can choose one among 0% through 100%.
Editing
Setup > Display
DVD
Setup > Display
DVD
OSD Background Transparency 35%
OSD Background Transparency 35%
OSD Background Color
1
English
OSD Background Color
OSD Language
Screen Saver
10 minutes
Screen Saver
OSD Language
1
OFF
5English
minutes
1010
minutes
minutes
15 minutes
30 minutes
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Changing the SETUP menu
Screen Saver (Default : 10 minutes)
Set the time to work the screen saver function on the screen.
VCR functions
5
Others
Press SETUP button to exit SETUP menu.
Español
Français
93
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 94
Changing the SETUP menu
Settings for Audio
Choose the appropriate Audio settings for your equipment.
It will only affect DVD discs during playback.
Press STOP button if you are playing a disc.
OPEN/
CLOSE
POWER
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
AUDIO
MENU/LIST
2
3
4
Setup Menu
2
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
5
CH
SKIP
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
Setup
DISPLAY
TOP MENU
STOP
PLAY
REW
FWD
PAUSE
Playback Setting
3
Select “Playback” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
DVD
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
4:3 Letter Box
All
English
Original
OFF
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Note
• Dynamic Range Control function is available only on the
discs which are recorded in
the Dolby Digital format.
4
Select a desired item using K / L buttons, then press
ENTER button.
Digital Out
Set the digital audio output.
Setup > Playback
TV Aspect
DVD
DVD
TV Aspect
Disc Menu Language
Disc Menu Language
4:3 Letter Box
All
English
Audio Language
Original
Audio Language
Original
Subtitle Language
OFF
Subtitle Language
Parental Lock
Digital Out
94
Setup > Playback
4:3 Letter Box
All
English
Parental Lock
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
PCM
ON
Dolby
Digital
DTSOFF
• Select a setting using K / L
buttons, then press ENTER
button.
Option window will appear.
Proceed to steps A, B or C.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 95
Changing the SETUP menu
Before you start
Settings for Audio (cont’d)
A
Settings for PCM (Default : Auto)
OFF
PCM Auto
48kHz
ON
Dolby
Digital
96kHz
DTSOFF
ntrol
udio
B
Settings
for Dolby Digital (Default : Stream)
g
OFF
ntrol
Audio
Settings for DTS (Default : OFF)
OFF
udio
PCM
ON
Dolby
Digital
DTSOFFON
OFF
Editing
• Select a setting using K / L buttons, then press ENTER button.
Your setting will be activated.
ON
: Outputs DTS signals.
When your amplifier/decoder is compatible with DTS, set to “ON”.
OFF
: No DTS signal is output.
When your amplifier/decoder is NOT compatible with DTS, set to
“OFF”.
Original
ntrol
Playing discs
C
PCM
ON
Dolby
Digital
PCM
Stream
DTSOFF
Note
When playing a DVD-RW
disc recorded in VR mode
• If the audio source on a disc is
Dolby Digital format, set “Dolby
Digital” to “PCM” so that you
can switch to main (L), sub
audio (R), or a mix of both (L/R)
with your amplifier/decoder.
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Setup > Playback
TV Aspect
Original
OFF
Audio Language
Digital Out
Parental Lock
Disc Menu Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
ON
OFF
Fast Forward with Audio (Default : OFF)
Set to ON to output the sound during playback in fast forward of x2.
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Setup > Playback
TV Aspect
Original
OFF
Audio Language
Digital Out
Parental Lock
Disc Menu Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
Fast Forward with Audio
OFF
Fast Forward with Audio
ON
ON
OFF OFF
Français
5
Press SETUP button to exit SETUP menu.
Español
Subtitle Language
DVD
4:3 Letter Box
All
English
Others
Setup > Playback
VCR functions
Subtitle Language
DVD
4:3 Letter Box
All
English
Changing the SETUP menu
Dynamic Range Control (Default : ON)
Set to ON to compress the range between soft and loud sounds.
Setup > Playback
Recording
• Select a setting using K / L buttons, then
press ENTER button.
Your setting will be activated.
PCM : Convert the Dolby Digital into PCM
(2 channel).
When your amplifier/decoder is NOT compatible with Dolby Digital, set to “PCM”.
Stream : Outputs Dolby Digital signals.
When your amplifier/decoder is compatible with Dolby Digital, set to “Stream”.
Original
Getting started
g
Note
When playing disc with copyright protection
• If you select “Auto”, the sound
will be down sampled at 48kHz.
• If you select “96kHz”, no digital
sound will be output. Select
“Auto”, so that outputting
48kHz digital sound.
Connections
• Select a setting using K / L buttons, then
press ENTER button.
Your setting will be activated.
Auto
: Select “Auto” usually.
48kHz : If your amplifier/decoder is NOT compatible with 96kHz PCM, select “48kHz”.
96kHz sound will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible
with 96kHz PCM, select “96kHz”. 96kHz
sound will be output.
Original
95
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 96
Changing the SETUP menu
Settings for Parental lock level
Some DVD-Video discs feature a Parental Lock level. Playback
will stop if the ratings exceed the levels you set, it will require
you to enter a password before the disc will playback.This feature prevents your children from viewing inappropriate material.
OPEN/
CLOSE
POWER
Press STOP button if you are playing a disc.
VCR Plus+
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
1
CLEAR/
REC
C.RESET MONITOR
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
AUDIO
MENU/LIST
2
3
4
DISPLAY
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
1
5
CH
SKIP
STOP
Setup Menu
4
PLAY
REW
FWD
PAUSE
2
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Playback” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
4
Select “Parental Lock” using K / L buttons, then press
ENTER button.
96
Note
• Parental lock function may
not be available to some
discs.
• With some DVDs, it may be
difficult to find if they are
compatible with parental lock.
Be sure to check if the
parental lock function operates in the way that you have
set.
• Record the password in case
you forget it.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 97
Changing the SETUP menu
Before you start
Settings for Parental lock level (cont’d)
Parental Lock (Default : All)
Set the Parental Lock level.
Setup > Playback
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
DVD
Parental Lock
Disc Menu Language
Subtitle Language
Digital Out
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
Fast Forward with Audio
OFF
Fast Forward with Audio
Getting started
A
4:3
All Letter Box
8
All
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
• Change the parental level
using K / L buttons, then
press ENTER button.
Option window will appear.
Proceed to steps A or B.
Connections
TV Aspect
Setup > Playback
DVD
A password has not been set yet
DVD
TV Aspect
Yes
DVD
TV Aspect
Parental Lock
Parental Lock
Disc Menu Language
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3
Password
All Letter Box
8- - - All
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
• Select “Yes” using s / B
buttons, then enter a new
password using Number
buttons.
Your setting will be activated.
Playing discs
4:3
Letter Box
Change
AllPassword?
Yes
No
8
All
7
English
6
Original
Audio Language
5
OFF
Subtitle Language
4
3
Digital Out
2
ON
Dynamic Range Control
1
Fast Forward with Audio
OFF
Setup > Playback
Recording
Setup > Playback
• If you select “No”, proceed
to Step 5.
B
A password has been set already
TV Aspect
Parental Lock
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
Setup > Playback
DVD
TV Aspect
4:3
Letter Box
Change
AllPassword?
Yes
No
8
Parental Lock
All
7
English
Disc Menu Language
6
Original
Audio Language
5
OFF
Subtitle Language
4
3
Digital Out
2
ON
Dynamic Range Control
1
Fast Forward with Audio
OFF
• If you select “No”, proceed
to Step 5.
Yes
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
DVD
4:3
Password
All Letter Box
8- - - All
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
• Select “Yes” using s / B
buttons, then enter a new
password using Number
buttons.
Your setting will be activated.
VCR functions
• Enter the current password
using Number buttons.
Setup > Playback
Changing the SETUP menu
Disc Menu Language
DVD
4:3
All Letter Box
Password
8
All
7* * * *
English
6
Original
5
OFF
4
3
2
ON
1
OFF
Editing
Setup > Playback
Change the password
Note
Français
97
Español
Press SETUP button to exit SETUP menu.
Others
5
• Press CLEAR/C.RESET button
to erase numbers entered
incorrectly.
• When you forget the password or you want to clear all
settings in Parental lock, enter
4,7,3,7 using Number buttons
in option window. Password
will be cleared and parental
levels will be set to All.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 98
VCR functions
Playback
VCR
3
1
Press POWER button on the
remote control or the front
panel of the unit.
When you are playing a tape, turn
the TV on and be sure to select
the input to which the unit is connected.
Press:
VCR
1
During playback, press
PAUSE F button.
Playback will pause and sound will
be muted.
OPEN/
CLOSE
POWER
.@/:
VCR Plus+
S
ABC
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
SKIP
4
Press PLAY B button to
resume play.
5
3
DEF
C
CH
STOP
PLAY
REW
FWD
PAUSE
2
4
Note
2
5
Insert a prerecorded tape,
then press PLAY B button to
begin playback.
Press STOP C button to stop
playback.
6
Press STOP/EJECT C A button on the front panel of the
unit to eject the tape.
• When a tape without record
tab is inserted, the unit will
start playback automatically.
• Tracking will be automatically
adjusted upon playback.To
adjust the tracking manually,
press the CHANNEL K/L
buttons on the front panel of
the unit or CHK/CHL buttons on the remote control.
Recording and One-touch timer recording
Recording
First:
VCR
Recording/Playback Time
T60
T120
T160
1hour
2hours
2-2/3hours
3hours
6hours
8hours
• Stereo or SAP is selected.
• Refer to page 36 for instructions
on timer recording.
98
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
VCR
CH
SKIP
Before recording, make sure:
• The desired channel is selected
by pressing the number buttons
on the remote control or
CHANNEL K/L buttons on the
front panel of the unit.
• There is a tape with a record tab
in the unit.
• The desired recording speed is
selected in SP (standard play) or
SLP (super long play) mode by
pressing REC SPEED button on
the remote control.
Recording speed:
Tape speed
Type of tape
SP mode
SLP mode
VCR
1
Press REC/OTR button to
begin the recording.
To temporarily stop recording or
to resume it, press PAUSE F button. After the unit has been in
Pause mode for 5 minutes, it will
stop automatically to protect the
tape and the video head from
damage.
2
Press STOP button when the
recording is completed.
Accidental erasure prevention
To prevent accidental recording
on a recorded cassette, remove
its record tab.To record on it
later, cover the hole with cellophane tape.
Record tab
2
1
STOP
1
PLAY
REW
FWD
PAUSE
Note
• To view one channel while
recording another
1) While you are recording on
the unit, press VIDEO/TV button.
2) At the cable box or satellite box, select the channel
you want to view.
If you have connected the unit to
a cable box or satellite box, refer
to “Connection to a Cable Box
or Satellite Box” section on page
14.
• If OTR is finished in VCR during
playback or REC mode in DVD, the
VCR will be in STOP mode and the
DVD keeps the current mode.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 99
VCR functions
One-touch timer recording
VCR
VCR
(1:00)
(8:00)
STOP
1
PLAY
REW
FWD
PAUSE
When one-touch timer recording
is finished, the unit will turn off
automatically.
To cancel the one-touch timer
recording within the specified
time, press STOP C button.
CH
SKIP
1
(7:30)
REC/OTR
Note
• The remaining recording time
will appear on the display
panel during an OTR. Press
DISPLAY button to see it on
the TV screen.
• You cannot pause an OTR.
Search
OPEN/
CLOSE
POWER
VCR
VCR
Press SEARCH MODE button
so that the index search
menu appears.
2
Press g/h buttons to
start index search.
If you want to go in the forward
direction, press g button.
If you want to go in the reverse
direction, press h button.
After index search, the VCR will
play the tape automatically.
CURRENT PROGRAM
Beginning
of tape
Pro. 1
02
01
Pro. 3
01
Pro. 4
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
ZOOM
Pro. 5
02
03
INDEX MARK
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
PLAY
REW
3
2
SPACE
CLEAR/
REC
C.RESET MONITOR
End
of tape
DEF
FWD
PAUSE
3
Note
Español
• Every time a tape is recorded,
an index mark is written on
the tape.
Others
INDEX SEARCH
03
Pro. 2
1
ABC
VCR functions
Enter the number of recordings you wish to skip using
Number buttons with in 30
seconds.
.@/:
VCR Plus+
SEARCH
MODE
Changing the SETUP menu
1
3
Editing
An index mark will be assigned at
the beginning of each recording
you make.You may skip to a specific marked point by following the
steps below.
First:
Playing discs
Index search
Recording
During normal recording,
press REC/OTR button to
begin one-touch timer
recording.
You can select a fixed recording
time by pressing the REC/OTR
button repeatedly.
(0:30)
DVD
REC
SPEED
Getting started
1
(Normal recording)
VIDEO/TV
Connections
This feature allows you to set the
recording length simply by pressing
REC/OTR button on the remote
control or the front panel of the unit.
First:
VCR
SLOW
Before you start
Recording and One-touch timer recording (cont’d)
Français
99
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 100
VCR functions
Search (cont’d)
Time search
.@/:
VCR Plus+
VCR
This feature allows you to go to a
specific point on a tape by entering the exact amount of time you
wish to skip in order to reach the
point.
First:
TIME SEARCH
2:50
1
DEF
ABC
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
2
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
VCR
1
Press SEARCH MODE button
repeatedly so that the Time
search menu appears.
2
Enter your desired time to
skip using Number buttons
with in 30 seconds.
3
Press g/h buttons to
start time search.
If you want to go in the forward
direction, press g button.
If you want to go in the reverse
direction, press h button.
After time search, the unit will play
the tape automatically.
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
3
PLAY
REW
FWD
3
PAUSE
Note
• These functions are not available during recording.
• Press STOP button to stop the
search.
• If the end of the tape is reached
during a Search, this unit will cancel
the search and rewind the tape.
Other operations
VCR
VCR
First:
To cue or review picture during playback (Picture Search):
Press g/h buttons during playback.
Press it again and the unit will search in super high speed. (in the SLP
mode only)
To freeze the picture on TV screen during playback (Still mode):
Press PAUSE F button. Each time you press the button, the picture will
be forwarded by one frame.
If the picture begins to vibrate vertically during the still mode, stabilize
the picture by pressing the CHANNEL K/L or CHK/CHL buttons.
If the picture is distorted or rolling vertically, adjust the vertical hold
control on your TV, if equipped.
Counter Reset:
Press CLEAR/C.RESET button.
To playback in slow motion:
Press SLOW
button during playback or the still mode.
If the noise bars appear on the TV screen, you can reduce it by pressing
CHANNEL K/L or CHK/CHL buttons.
When you playback a tape recorded in Hi-Fi stereo:
Press AUDIO button on the remote control to select Hi-Fi or MONO
for playback sound mode.
• If you have connected a stereo TV to this unit, select “HIFI”.
• If you have connected a monaural TV to this unit, select “MONO”.
100
Note
• Still/Slow/Pause mode will be
automatically cancelled after 5
minutes to prevent damage to
the tape and the video head.
• To return to playback from
the Picture Search/Still/Slow
mode, press PLAY button.
Your Selection
HIFI
MONO
Type of recorded tape
L-channel
R-channel
non Hi-Fi tapes
Monaural
Monaural
Monaural
Hi-Fi tapes
recorded in
Hi-Fi stereo
L
R
L+R
Hi-Fi tapes
recorded main
audio program
Main audio
program
Main audio
program
Main audio
program
Hi-Fi tapes
recorded second
audio program
Second audio Second audio Second audio
program
program
program
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 101
Others
Before you start
Troubleshooting
Before requesting service for this unit, check the table below for a possible cause of the problem you are
experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and
restore proper operation.
Symptom
Remedy
Picture noise appears.
• The disc is dirty or flawed.
• Head cleaning for VCR may be necessary.
Refer to “AUTO HEAD CLEANING”.
• If the picture output signal from the unit passes through your VCR
to get to your TV, or if you are connected to a combination
TV/VIDEO player, the copy-protection signal applied to some DVD
programs could affect picture quality. If you still experience this
problem even when you connect the unit directly to your TV, try
connecting the unit to your TV's S-VIDEO input.
• Adjust tracking control for better picture by pressing
CHANNEL (o / p) buttons on this unit or CH ( o / p)
buttons while you are playing a video tape.
TV program reception does not fill the
screen.
• Try to set the channels with "Auto Preset" in SETUP menu
(page 18).
• Select a channel of any TV program using the CH o / p buttons.
• Press VIDEO/TV button if necessary.
TV program pictures are distorted.
• Adjust TV antenna.
• Adjust the picture (see the TV's instruction manual).
• Place the unit and TV farther apart.
• Place the TV and any bunched antenna cables farther apart.
• Switch the input to TV.
• Connect the antenna cable correctly (page 13).
• The disc is dirty or flawed.
• Re-connect all connections securely.
• The connecting cord is damaged.
• Check the connections to the amplifier input.
• The input source setting on the amplifier is incorrect.
• The unit is in pause mode or in Slow-motion Play mode.
• The unit is in fast forward or fast reverse mode.
• If the audio signal does not come through the DIGITAL AUDIO
OUT jacks, check the Audio Setup settings (pages 94-95).
Sound is noisy.
• The disc is dirty or flawed.
Español
There is no sound.
Sound
Others
• If the playback picture output from a DVD player,VCR, or tuner
goes through the unit before reaching your TV, the copyprotection signal applied to some programs could affect picture
quality. Disconnect the playback equipment in question and
connect it directly to your TV.
VCR functions
The playback picture or TV program from
the equipment connected through the
unit is distorted.
Changing the SETUP menu
TV channels cannot be changed.
Editing
• Re-connect the connecting cord securely.
• The connecting cords are damaged.
• The Setup Display appears. Press SETUP or RETURN
button to turn off the display.
• Check the connection to your TV (page 13).
• Check the RF output channel when you view a TV program
using RF connection.
• Check if the INTERLACE/PROGRESSIVE mode is set correctly
according to your TV. See page 13.
• Switch the input selector on your TV (such as to "LINE1") so
that the signal from this unit appears on the TV screen.
Playing discs
There is no picture.
Recording
• Check that the AC power cord is connected securely.
Getting started
The power does not turn on.
Picture
Connections
Power
Français
101
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 102
Others
Troubleshooting (cont’d)
Symptom
Playback
The disc does not play.
The disc does not start playback from the
beginning.
The unit starts playing from the disc
automatically.
Some functions such as Stop, Search, or
Slow-motion Play cannot be performed.
The language for the sound track cannot
be changed.
• No disc is inserted.
• A blank disc is inserted.
• No cassette tape is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play certain discs (such as a CD-ROM) (page
46).
• The region code on the DVD VIDEO does not match the unit
(page 46).
• Moisture has condensed inside the unit. Remove the disc and
leave the unit turned on at least for 2 hours until the moisture
evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot
play the disc if it was not finalized (page 44).
• Resume play was activated (page 51). Press STOP C button
twice.
• You have inserted a disc whose Title menu or DVD menu
automatically appears on the TV screen when it is first insert.
• The DVD VIDEO features an auto playback function.
• Depending on the disc, you may not be able to do some of the
operations above. See the instruction manual supplied with the disc.
• Multilingual tracks are not recorded on the DVD VIDEO,
DVD-R or DVD-RW being played.
• The DVD VIDEO prohibits the changing of the language for the
sound track.
• Try changing the language using the DVD VIDEO's menu.
The subtitle language cannot be changed
or turned off.
• Multilingual subtitle are not recorded on the DVD VIDEO.
• The DVD VIDEO prohibits changing of the subtitles.
• Try changing the subtitle using the DVD VIDEO's menu.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD VIDEO being played.
• You are trying to change the angles when
icon does not
appear on the TV screen (page 62).
• The DVD VIDEO prohibits changing angles.
• Try changing the angle using the DVD VIDEO's menu.
Recording/Timer recording/Editing
The channel cannot be changed from the
channel you are recording.
Recording does not start immediately
after you press REC/OTR button.
• Set the TV's input to "TV".
• An unused DVD-R or DVD-RW was inserted. It takes a while
for the unit to automatically format a DVD-RW.
• Make sure the tape has a record tab when you record to a
cassette tape. If needed, cover the hole with cellophane tape.
Nothing was recorded even though you
set the timer setting correctly.
•There was a power failure during recording.
• The units internal clock stopped due to a power failure that
lasted for more than 30 seconds.
Reset the clock (pages 24-25).
• Disconnect the AC power cord from the AC outlet, and
connect it again.
• The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that was set
later or has priority.
Recording does not stop immediately
after you press STOP C button.
• It will take a few seconds for the unit to input disc data before
recording can stop.
Timer recording is not complete or did
not start from the beginning.
• The timer setting overlapped with another setting that was set
later or has priority (page 38).
• Disc space was not enough.
• Make sure indicator appears on the front display of this unit. If not,
press POWER button.
Timer recording is impossible.
102
Remedy
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 103
Others
Symptom
Remedy
Remote control
The remote control does not function.
• When static electricity, etc., causes the unit to operate
abnormally, unplug the unit and then plug it in again.
The disc tray does not open when you
press OPEN/CLOSE A button.
• It may take a few seconds for the disc tray to open after you
have recorded or edited a disc.
• This is because the unit is adding disc data to the disc.
"Repairing" appears on the display.
• If there is a power failure or unplugging during recording,
finalizing, formatting or editing, a Repairing process will begin
automatically just after turning the unit on again.
It may take several minutes up to about four hours.
Repairing
Error message
Cause
Recording
The unit does not operate properly.
Solution
Insert the standardized disc which
bear the marks on page 46.
Region Error
--- Please eject the disc. --Playback is not authorized in your
region.
Playback is not authorized
because the region code of the
DVD video disc you inserted
is different.
Insert the DVD-Video disc with
region codes 1 or ALL.
Parental Lock On
--- Please eject the disc. --The current selected parental level
Prohibits playback.
The current selected parental
level in the SETUP Menu
prohibits playback.
Check the "Parental Lock" setting
(pages 96-97).
The recording function encountered
the copy prohibited program.
You cannot record copy prohibited
programs.
Recording Error
This program is not
recordable in Video mode.
You are trying to record the copyonce program onto the DVD-RW
disc in Video mode or the DVD-R
disc.
Set "DVD-RW Recording Format"
to "VR mode" (page 30-31).
Recording Error
You are trying to record onto the
disc which is unrecordable, or the
disc status prevents recording.
Insert the recordable disc, and
ensure the disc status satisfies
the recording requirements
(pages 28-45).
You are trying to record a copyonce program onto a DVD-RW
disc which is not compatible with
CPRM.
Insert a ver.1.1 CPRM compatible
DVD-RW disc (page 29).
You are trying to record on to the
protected disc which is set in the
Disc Setting Menu.
Release the disc protect setting
in the Disc Setting menu (page 45).
103
Français
This disc is protected and not
recordable.
Español
Recording Error
Others
Recording Error
This program is not allowed to
be recorded on this disc.
VCR functions
Can not record on this disc.
Changing the SETUP menu
Recording Error
Editing
Unplayable disc is inserted
in the DVD recorder.
Playing discs
Disc Error
--- Please eject the disc. --Playback feature may not be
available on this Disc.
This program is not allowed
to be recorded.
Getting started
Others
Connections
• Batteries are weak.
• There are obstacles between the remote control and the unit.
• The remote control is far from the unit.
• There are no batteries in the remote control.
• Turn on the unit.
• The remote control is not pointed at the remote sensor on the
unit.
• Press the DVD or VCR button, whichever you need. Then, try
again.
Before you start
Troubleshooting (cont’d)
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 104
Others
Troubleshooting (cont’d)
Error message
Recording Error
Disc is full.
Cause
Solution
Insert the recordable disc with
enough recording space.
(No area for new recording)
You are trying to record onto
the disc which has no space
for recording.
Recording Error
You cannot record more
than 99 titles on one disc.
(The maximum is 99)
You are trying to record onto the
disc on which the number of
recording titles comes up to the
maximum (99).
Delete unnecessary titles
(pages 65, 69, 78).
Recording Error
You cannot record more the
999 chapters on one disc.
(The maximum is 999)
You are trying to record onto the
VR mode DVD-RW disc on which
the number of recording chapters
comes up to the maximum (999).
Delete unnecessary chapter
markers (pages 73, 82).
This disc has no space to write
the Control Information when
recording or deleting contents.
Delete unnecessary titles
(pages 65, 69, 78).
Recording Error
You cannot record on this disc
as Control Information is full.
When editing has been repeatedly
performed, the control Information
area may come up to be full even
the recording area has enough space.
Recording Error
You cannot record on the
disc as Power Calibration
Area is full.
Recording Error
This disc is already finalized.
This disc's working area for
recording is full.
Insert a new disc.
When recordings are performed
repeatedly onto an unstable disc,
this area may come up to be full.
Release the finalizing for this disc
(page 44).
You are trying to record onto
the disc already finalized.
* If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the
error description for calling our help line mentioned on the front page to locate an Authorized service center.
RF converter output
You can watch the TV programs with the tuner of the
unit. (Usually channel 3 or 4 of the TV is available for
the RF converter setting.) Be sure to connect the unit
to a TV using the RF cable. Refer to page 13.
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
1
Select channel 3 on your TV.
• Be sure that the unit is in DVD mode.
2
Press VIDEO/TV button on the remote control.
• If noise appears, change the RF output channel
of the unit to CH 4 by pressing VIDEO/TV button for 3 seconds.The RF output channel will
alternate between CH3 and CH4 as follows.
• Changing the RF output channel is available only
when the unit is in DVD mode.
104
OPEN/
CLOSE
POWER
VCR
for more than
3 seconds
.@/:
VCR Plus+
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
3 seconds
(RF ON) CH4
3 seconds
(RF ON) CH3
3 seconds
(RF ON) CH4
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
3 seconds
STOP
PLAY
REW
FWD
PAUSE
2
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 105
Others
Changing the SETUP menu
VCR functions
Others
Code
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Editing
Language
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Playing discs
Español
Code
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6247
6265
5247
6258
6266
6367
6459
6461
Recording
Language
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Getting started
Code
6159
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
Connections
Language
(Afan) Oromo
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Before you start
Language code
Français
105
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 106
Others
Glossary
Analog audio
An electrical signal that directly
represents sound. Compare this
to digital audio which can be an
electrical signal, but is an indirect
representation of sound. See also
Digital audio.
Aspect ratio
The width of a TV screen relative
to its height. Conventional TVs are
4:3 (in other words, the screen is
almost square); widescreen models are 16:9 (the screen is almost
twice as wide as it is high).
Chapter
Just as a book is split up into several chapters, a title on a DVD
disc is usually divided into chapters. See also Title.
Component video output
Each signal of luminance(Y) and
component(PB/CB, PR/CR) is independent to output so that you can
experience picture color as it is.
Also, due to compatibility with
progressive video (525p/480p),
you can experience higher-density
picture than that in interlace
(525i/480i).
CPRM
(Content Protection for
Recordable Media)
CPRM is a copy protection system with scramble system regarding the recording of “copy-once”
broadcast programs (e.g. some
satellite broadcasts).
Digital audio
An indirect representation of
sound by numbers. During recording, the sound is measured at discrete intervals (44, 100 times a
second for CD audio) by an analog-to-digital converter, generating
a stream of numbers. On playback,
a digital-to-analog converter generates an analog signal based on
these numbers. See also Sampling
frequency and Analog audio.
106
Dolby Digital
The system to compress digital
sound developed by Dolby
Laboratories. It offers you sound
of stereo(2ch) or multi-channel
audio (up to 5.1ch).
DTS (Digital Theater System)
DTS is a 5.1 channel surround
sound system, but it is different
from Dolby Digital.The formats
were developed by Digital Theater
System, Inc.
MP3 (MPEG Audio Layer 3)
MP3 is a method of compressing
files.You can copy MP3 files on
CD-R/RW discs from the computer and play the files on this unit.
Finalize
To make DVD discs, which have
been recorded on, possible to play
in DVD players.With this unit, it is
possible to finalize DVD-R/DVDRW discs.
PCM
(Pulse Code Modulation)
The most common system of
encoding digital audio, found on
CDs and DAT. Excellent quality, but
requires a lot of data compared to
formats such as Dolby Digital and
MPEG audio. For compatibility with
digital audio recorders (CD, MD
and DAT) and AV amplifiers with
digital inputs, this unit can convert
Dolby Digital and MPEG audio to
PCM. See also Digital audio.
Playlist
From this list you can play contents
of a disc as your desired order or in
sequence. Also it is allowed to
search a specific scene directly.
Progressive Scan (525p/480p)
A type of display that does not
split each frame into fields, and
instead scans directly through all
the scanlines of each frame in
order. Progressive Scan provides
less flickering and higher image
resolution than traditional
(525i/480i) TV signals. Refer to
page 13 for instructions on selective Progressive Scan mode.
Regions code
Regions associate discs and players with particular areas of the
world.This unit will only play discs
that have compatible region
codes.You can find the region
code of your unit by looking on
the rear panel. Some discs are
compatible with more than one
region (or all regions).
Sampling frequency
The rate which sound is measured
by a specified interval to turn into
digital audio data.The numbers of
sampling in one second defines as
sampling frequency.The higher the
rate, the better the sound quality
as possible as it is.
SAP
(Secondary Audio Program)
Sub-audio channel which is delivered separately from main-audio
channel.This audio channel is used
as an alternate in bilingual broadcasting.
S-Video output
It delivers independently each signal of color(C) and luminance(Y)
to TV as video signals, so that
higher-quality picture will be
gained.
Title (DVD only)
A collection of chapters on DVD
disc. See also chapter.
Track
Audio CDs use tracks to divide
up the content of a disc.The DVD
equivalent is called a chapter. See
also Chapter.
VCR Plus+ system
Allows you to set a timer recording by entering a PlusCode number found in participating TV listings.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 107
Others
Before you start
Specifications
General
System
Connections
Getting started
VCR video heads
Power requirements
Power consumption
Weight
Dimensions (width x height x depth)
Operating temperature
Operating humidity
TV format
DVD-Video, DVD-R/RW, CD-DA, CD-R/RW,
Video Cassette Tape
Four heads
AC120 V, 60 Hz
37 W (standby: 4.3 W)
9.5 lbs ( 4.3 kg )
17 1/8" x 3 15/16" x 10 1/4" (435 x 100 x 261 mm)
41Fº to 104Fº (5ºC to 40ºC)
5% to 85% (no condensation)
NTSC
Tuner
2-13ch
14-69ch
C1-C125ch
Built-in VHF converter
VHF channel 3 or 4
Recording
Receivable channels
VHF
UHF
CATV
RF Converter
Converter output
Note:
The specifications and design of this product are subject to change without notice.
Playing discs
Editing
Changing the SETUP menu
VCR functions
Others
Español
Français
107
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 108
Español
Fácil grabación de DVD
Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD.
Nota:
Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV.
Paso 1: Elija un tipo de disco
Paso 2:
Coloque un
disco en blanco
Hay varias tipos de discos DVD
grabables a su elección. Elija un tipo de
disco DVD que se pueda grabar según
sus necesidades de reproducción/
grabación/edición. Elija el tipo según
"Tipos de disco DVD" en esta página.
Este grabador de DVD puede
grabar en los siguientes tipos de
disco.
1
2
3
Para encender
Para abrir
Para cerrar
Mando a distancia
1
(o)
VCR Plus+
.@/:
ABC
: Puede utilizar
Para seleccionar la
velocidad de grabación
MENU/LIST
TOP MENU
RETURN
SETUP
1
SEARCH
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
STOP
POWER
VCR Plus+
3
OPEN/
CLOSE
.@/:
ABC
PLAY
REW
FWD
2
PAUSE
DEF
SEARCH
SP 2:01 Rem.
Cargando
Esta operación
puede demorar en
reconocerse.
: Algunas funciones son limitadas
DVD-RW VR
: No puede utilizar
DVD-RW Video
DVD-R
DVD-RW VR
DVD-RW Video
DVD-R
¿Regrabable?
Sí
Sí
No
Puede crear capítulos a intervalos fijos (auto.)
Sí
Sí
Sí
Puede crear capítulos donde desee (manual)
Sí
No
No
Puede grabar imágenes de tamaño 16:9
Sí
Sí
Sí
Puede grabar un programa de Copia-una-vez
Sí
No
No
Grabar programas de TV
Volver a utilizar borrando partes no deseadas
Editar las grabaciones
Editar/grabar de equipos conectados
Copiar discos para distribución
*1
Reproducir en otro equipo de DVD
*1
Detalles
Grabación
Edición
108
2
Formato del disco
Desea
*1
Para seleccionar el
modo DVD
DEF
Tipos de disco DVD
: Más adecuado
1
2
OPEN/
CLOSE
POWER
* Esta unidad no puede grabar en los
discos siguientes.
• DVD-R General Ver 2.0 / 8x
• DVD-RW Ver 1.2 / 2-4x compatible
con CPRM
Por ejemplo, cuando desea grabar
repetidamente en el mismo disco o
cuando desea editar el disco
después de grabar, seleccione el
disco de tipo regrabable DVD-RW.
Cuando desea guardar
grabaciones sin alterarlos, un DVD
no regrabable DVD-R puede ser
más conveniente.
Paso 3:
Seleccione la velocidad de grabación
Puede hacer funciones de edición básica
Sí
Sí
Sí
Puede hacer funciones de edición avanzadas (edición de lista a reproducir)
Sí
No
No
El DVD-RW (modo VR) sólo puede
reproducirse en equipos de DVD compatibles
con VR.
Nota:
Para más detalles sobre las funciones anteriores y las
limitaciones implícitas, lea las explicaciones en este manual.
Coloque el disco en el
grabador. Haga el formato del
disco del menú SETUP,
existen los formatos de video
(modo de Video) o de
grabación de video (modo
VR) según el tipo de disco
colocado. Esto es necesario
para preparar el disco para
grabación.Vea los detalles
en las páginas 30-32.
* Al formatear, todo el
contenido de ese disco se
borrarán.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 109
Español
Before you start
Fácil grabación de DVD (cont.)
Paso 4:
Seleccione el canal
deseado
Paso 5:
Grabe en discos
DVD
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
TOP MENU
CH
SKIP
OPEN/
CLOSE
POWER
STOP
VCR Plus+
Connections
MENU/LIST
Paso 6:
Pare la grabación
.@/:
ABC
PLAY
REW
DEF
FWD
PAUSE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
RETURN
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
AUDIO
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
DISPLAY
Getting started
SEARCH
MODE
58%
Escrit de datos
STOP
CH
SKIP
STOP
REW
PLAY
PLAY
FWD
Esta operación puede
demorar en completarse.
I
Puede seleccionar el título que desea reproducir de un menú indicado y empiece a reproducir inmediatamente. Las grabaciones pueden
verse fácilmente en un disco, el procedimiento es simple ya que sólo
tiene que elegir el título en un capítulo de la pantalla del menú.
Inicio de grab.
Título 1
Parada/inicio
Parada grab.
Playing discs
Sugerencia 1: Reproduzca el contenido grabado
Recording
CH 1
Título 2
¿Qué son títulos y capítulos?
Editing
La grabaciones del disco DVD se dividen generalmente en títulos.
Los títulos pueden subdividirse en capítulos.
Capítulo 1 Capítulo 2 Capítulo 3 Capítulo 1 Capítulo 2
Sugerencia 2: Edite el disco grabado
Puede editar lo siguiente de la lista de títulos.
• Poniendo nombres en títulos
• Seleccionando imágenes para índices (modo VR)
• Seleccionando/borrando marcadores de capítulos
• Borrado de partes de títulos o escenas (Modo VR)
Original y Playlist (modo VR)
Puede editar las grabaciones en la lista a reproducir sin cambiar las grabaciones originales. Cualquier lista a
reproducir no ocupa mucho espacio en el disco.
¿Qué significa "Original" o "Playlist"?
Others
A lo largo de este manual encontrará Original y Playlist que se refieren a las grabaciones reales y la versión editada.
• La grabación Original se refiere a la grabación real en el disco.
• El Playlist se refiere a la versión editada del disco; cómo se va a reproducir la versión Original.
VCR functions
Title Delete: Esto borra permanentemente una escena completa del disco.
Scene Delete: Esto permite que el usuario edite dentro de una escena específica (anuncios comerciales, por ejemplo).
Changing the SETUP menu
La edición de discos puede ser muy fácil y el grabador de DVD ofrece convenientes funciones de edición
posibles sólo con los DVD-R/RW.
Finalización de un disco
Français
109
Español
• Esto permitirá que un disco que se grabe en nuestra unidad pueda ser reproducido en un reproductor
DVD diferente. Un disco sin finalizar no se podrá reproducir en otro reproductor.
• Después de finalizar un disco, si la grabación se hizo en el modo de vídeo, usted no podrá editar ninguna información que se encuentre en ese disco.
• Si ha grabado en el modo VR en un disco DVD-RW, la edición podrá realizarse incluso después de la
finalización.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 110
Español
Reproducción con videograbadora
VCR
3
1
Presione el botón POWER en
el mando a distancia o el
panel frontal de la unidad.
Cuando reproduzca una cinta,
conecte el TV y asegúrese de
seleccionar la entrada donde se
conecta la unidad.
Presione:
VCR
2
Coloque una cinta pregrabada y presione el botón PLAY
B para empezar la reproducción.
Durante la reproducción, presione el botón PAUSE F.
Se hará una pausa de reproducción y se silenciará el sonido.
OPEN/
CLOSE
POWER
.@/:
VCR Plus+
Presione el botón PLAY B
para continuar la reproducción.
5
Presione el botón STOP C
para detener la reproducción.
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
Presione el botón
STOP/EJECT C A en el panel
frontal de la unidad para
expulsar la cinta.
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
5
3
DEF
SEARCH
MODE
ZOOM
4
ABC
CM SKIP
CLEAR/
REC
C.RESET MONITOR
6
110
1
STOP
PLAY
REW
FWD
PAUSE
2
4
Nota
• Cuando se coloca una cinta
sin la lengüeta de grabación, la
unidad empezará a reproducir
automáticamente.
• El seguimiento se ajustará
automáticamente para la
reproducción. Para ajustar
manualmente el seguimiento,
presione los botones CHANNEL K/L en el panel frontal
de la unidad o los botones
CHK/CHL en el mando a
distancia.
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 111
Español
Before you start
Grabación y grabación con temporizador de un toque (VCR)
Grabación
Primero:
VCR
Presione el botón STOP
cuando se complete la
grabación.
Prevención contra borrado accidental
Para evitar una grabación por
accidente en un casete grabado,
rompa la lengüeta de grabación.
Para volver a grabar posteriormente, cubra el orificio con
cinta adhesiva.
Lengüeta de
grabación
DVD
SLOW
REC
SPEED
REC/OTR
2
1
CH
SKIP
STOP
PLAY
REW
FWD
PAUSE
1
Nota
• Para ver un canal mientras
graba en otro
1) Mientras está grabando en
la unidad, presione el botón
VIDEO/TV.
2) En la caja de cable o caja
de satélite, seleccione el canal
que desea ver.
Si se conectó la unidad a una
caja de cable o caja de satélite,
consulte la sección de
"Connection to a cable box or
satellite box" en la página 14.
VCR
VCR
(1:00)
VIDEO/TV
DVD
REC
SPEED
REC/OTR
CH
SKIP
1
STOP
1
PLAY
REW
FWD
PAUSE
Nota
• Aparecerá el tiempo de grabación restante en el panel de
visualización durante una OTR. Presione el botón DISPLAY
para que aparezcalo en la pantalla del televisor.
• No puede hacer una pausa en una OTR.
• Si se termina el OTR en la videograbadora durante el modo de
reproducción o REC en DVD, la videograbadora estará en el
modo STOP y la DVD se mantiene en el modo actual.
Français
(8:00)
(0:30)
VCR
SLOW
Español
(Grabación normal)
SETUP
Others
Durante la grabación normal,
presione el botón REC/OTR
para empezar la grabación
con temporizador de un
toque.
Puede seleccionar un tiempo de
grabación determinado presionando repetidamente el botón
REC/OTR.
Para cancelar la grabación con
temporizador de un toque dentro
del tiempo especificado, presione
el botón STOP C.
RETURN
VCR functions
1
Cuando termina la grabación con
temporizador de un toque, la
unidad se desconectará automáticamente.
Changing the SETUP menu
Esta función permite seleccionar
la longitud de la grabación simplemente presionando el botón
REC/OTR en el mando a distancia
o en el panel frontal de la unidad.
Primero:
Editing
Grabación con temporizador de un toque (OTR)
Playing discs
• Se selecciona Estéreo o SAP.
2
VIDEO/TV
Recording
Tiempo de
grabación/reproducción
T60
T120
T160
1 hora
2 horas 2-2/3 horas
3 horas
6 horas
8 horas
Presione el botón REC/OTR
para empezar la grabación.
Para detener temporalmente la
grabación o continuarla, presione
el botón PAUSE F. Después de
que la unidad haya estado en el
modo de pausa durante 5 minutos, se detendrá automáticamente
para proteger al cinta y el cabezal
de video contra cambios.
SETUP
VCR
Getting started
Velocidad
de la cinta
Tipo de cinta
Modo SP
Modo SLP
RETURN
1
Connections
Antes de grabar, asegúrese de que:
• Se seleccionó el canal deseado
presionando los botones numéricos en el mando a distancia o
botones CHANNEL K/L en el
panel frontal de la unidad.
• Hay una cinta con la lengüeta
para grabación intacta en la
unidad.
• Se seleccionó la velocidad de
grabación deseada en SP (reproducción estándar) o SLP (reproducción de super larga duración)
presionando el botón REC
SPEED en el mando a distancia.
Velocidad de grabación:
VCR
(7:30)
111
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 112
Français
Enregistrement simple de DVD
Ce qui suit permettra de comprendre facilement comment enregistrer sur des disques DVD.
Remarque :
Vérifier la présence de piles dans la télécommande et le raccordement correct de cet appareil et du téléviseur.
Étape 1 :
Choisir un type de disque
Il y a plusieurs types de disques DVD
enregistrables. Choisir un type de disque DVD
enregistrable sur la base de ses propres besoins
de lecture/enregistrement/montage. Voir “Types
de disque DVD” au bas de cette page pour les
détails sur les différences entre les divers
genres de supports compatibles.
Cet appareil peut enregistrer sur les
types de disques suivants.
(ou)
*Cet appareil ne peut pas enregistrer sur
les disques suivants.
• DVD-RW Ver 1.2/2-4x compatible CPRM
• DVD-R ordinaire Ver 2.0/8x
Par exemple, pour enregistrer à
répétition sur le même disque, ou
pour éditer le disque après l’enregistrement, sélectionner un disque
de type DVD-RW réinscriptible.
Pour sauvegarder des enregistrements sans aucune modification, un
DVD-R non-inscriptible peut faire
l’affaire.
Types de disques DVD
Étape 2 :
Insérer un
disque vierge
Étape 3 :
Sélectionner la vitesse
d’enregistrement
Mettre l’appareil sous tension.
Ouvrir le tiroir à
disque.
Fermer le tiroir à
disque.
1
2
3
Télécommande
1
OPEN/
CLOSE
POWER
VCR Plus+
.@/:
ABC
2
1
Pour sélectionner le
mode DVD
2
Pour sélectionner la
vitesse d’enregistrement
MENU/LIST
TOP MENU
RETURN
SETUP
1
DEF
SEARCH
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
3
OPEN/
CLOSE
POWER
VCR Plus+
.@/:
ABC
STOP
PLAY
REW
FWD
2
PAUSE
DEF
SEARCH
Loading
SP 2:01 Rem.
La reconnaissance de
cette opération peut
exiger un certain temps.
Formatage du disque
Insérer le disque dans
l’appareil. Puis, formater le
disque au menu
CONFIGURER. Le format
Vidéo (mode Vidéo) ou le
format d’enregistrement
vidéo (mode VR) sera
disponible selon le type de
disque inséré. Cela est
nécessaire pour préparer le
disque pour l’enregistrement.Voir les détails aux
pages 30-32.
112
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 113
Français
Étape 5 :
Enregistrer sur
des disques DVD
MENU/LIST
Étape 6 :
Arrêter l’enregistrement.
.@/:
ABC
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
DVD
REC
SPEED
REC/OTR
CH
SKIP
STOP
PLAY
REW
RETURN
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
SLOW
AUDIO
REC
SPEED
FWD
PAUSE
DISPLAY
Getting started
VCR Plus+
VIDEO/TV
TOP MENU
OPEN/
CLOSE
POWER
VCR
SLOW
Connections
Étape 4 :
Sélectionner la
chaîne souhaitée
SETUP
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
58%
REC/OTR
Escrit de datos
SKIP
STOP
REW
STOP
CH
Before you start
Enregistrement simple de DVD (suite)
PLAY
PLAY
FWD
Recording
CH 1
Cette opération peut
demander un certain temps.
I
Playing discs
Conseil 1: Lire le contenu enregistré
Le titre à lire peut être sélectionné au menu affiché, et la lecture
peut commencer immédiatement. Le contenu enregistré est très
accessible sur un disque, la procédure est vraiment simple,
comme si on choisissait un titre de chapitre à l’écran de menu.
Démarrer enr.
Titre 1
Arrêt/Démarrer
Arrêter enr.
Titre 2
Les matériaux du disque DVD sont généralement divisés en
plusieurs titres. Les titres peuvent encore être subdivisés en
chapitres.
Editing
Qu’est-ce que titres et chapitres?
Chapitre 1 Chapitre 2 Chapitre 3 Chapitre 1 Chapitre 2
Changing the SETUP menu
Conseil 2: Monter le disque enregistré
Le montage des disques est très simple; cet appareil offre des fonctions de montage pratiques, utilisables seulement avec les disques DVD-R/RW.
Ce qui suit peut être monté à partir d’une liste de titres.
VCR functions
• Dénomination de titres
• Réglage d’images pour les images miniatures (mode VR)
• Réglage/suppression de marques de chapitres
• Suppression de parties de titres (mode VR)
Suppression de titre : Supprime de façon permanente toute une scène du disque.
Suppression de scène : Permet à l’utilisateur le montage à l’intérieur d’une scène spécifique (par ex. publicité).
Original et Playlist (mode VR)
Il est possible de monter les enregistrements dans la Playlist sans changer les enregistrements originaux. Une
Playlist n’utilise pas beaucoup d’espace du disque.
À quoi servent “Original” ou “Playlist”?
Others
Dans ce manuel, Original et Playlist seront utilisés pour référer aux matériaux réels et à la version montée.
• Les matériaux Original réfèrent à ce qui est réellement enregistré sur le disque.
• Les matériaux Playlist réfèrent à la version montée du disque; comment les matériaux Original
seront lus.
Español
Finalisation d’un disque
Français
• Permet la lecture d’un disque enregistré sur cet appareil sur un lecteur de DVD différent – sans finalisation, la lecture sur un autre lecteur est impossible.
• Après la finalisation d’un disque, si l’enregistrement a été fait en mode vidéo, il sera imposible de monter toute information sur ce disque.
• En cas d’enregistrement en mode VR sur un disque DVD-RW, le montage est encore possible après la
finalisation.
113
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 114
Français
Lecture avec magnétoscope
VCR
3
1
Appuyer sur la touche
POWER sur la télécommande
ou sur le panneau avant de
l’appareil.
Pour lire une cassette, allumer le
téléviseur et bien sélectionner
l’entrée à laquelle l’appareil est
raccordé.
Appuyer sur :
VCR
Pendant la lecture, appuyer
sur la touche PAUSE F.
L’appareil passera en pause et le
son sera assourdi.
1
OPEN/
CLOSE
POWER
.@/:
VCR Plus+
DEF
SEARCH
MODE
GHI
JKL
MNO
CM SKIP
PQRS
TUV
WXYZ
SPACE
ZOOM
CLEAR/
REC
C.RESET MONITOR
4
ABC
AUDIO
DISPLAY
MENU/LIST
TOP MENU
RETURN
SETUP
Appuyer sur la touche
PLAY B pour reprendre la
lecture.
2
5
Insérer une cassette
préenregistrée, puis appuyer
sur la touche PLAY B pour
démarrer la lecture.
Appuyer sur la touche STOP C
pour arrêter la lecture.
6
Appuyer sur la touche
STOP/EJECT C A sur le
panneau avant de l’appareil
pour éjecter la cassette.
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
CH
SKIP
5
3
STOP
PLAY
REW
FWD
PAUSE
2
4
Remarques
• Quand une cassette sans
ergot d’enregistrement est
insérée, l’appareil démarre
automatiquement la lecture.
• L’alignement sera automatiquement
ajusté à la lecture. Pour ajuster
manuellement l’alignement, appuyer
sur les touches CHANNEL K/L
sur le panneau avant de l’appareil
ou sur les touches CHK/CHL de
la télécommande.
114
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 115
Français
Before you start
Enregistrement avec magnétoscope
Enregistrement
D’abord:
VCR
• Stéréo ou SAP est sélectionné :
Appuyer sur la touche STOP quand
l’enregistrement est terminé.
Prévention de l’effacement accidentel
Pour prévenir l’enregistrement accidentel sur une cassette enregistrée, briser
son ergot d’enregistrement. Pour réenregistrer dessus par la suite, couvrir le
trou de ruban adhésif.
Ergot d'enregistrement
VIDEO/TV
DVD
REC
SPEED
REC/OTR
SKIP
2
CH
STOP
1
PLAY
REW
FWD
PAUSE
1
Remarques
• Pour visionner une chaîne pendant
l’enregistrement d’une autre
1) Pendant l’enregistrement sur
cet appareil, appuyer sur la
touche VIDEO/TV.
2) Sur la boîte de câblovision ou
la boîte satellite, sélectionner la
chaîne à visualiser.
Si cet appareil est raccordé à une
boîte de câblovision ou une boîte
satellite, se reporter à la section
“Connection to a cable box or
satellite box” à la page 14.
VCR
VCR
(8:00)
(0:30)
(1:00)
(7:30)
VCR
VIDEO/TV
DVD
SLOW
REC
SPEED
REC/OTR
SKIP
1
CH
STOP
1
PLAY
REW
FWD
PAUSE
Remarques
• La durée restante pour l’enregistrement apparaît sur l’affichage
de panneau avant pendant l’enregistrement par l’OTR.
• Une pause n’est pas possible pour
l’enregistrement par l’OTR.
• Si un enregistrement par l’OTR est
términé dans le magnétscope tandis que le DVD est en mode de
lecture ou d’enregistrement, le
magnétoscope entrera en mode
d’arrêt et le DVD restera dans le
mode actuel.
Español
(Enregistrement
normal)
SETUP
Others
Pendant l’enregistrement normal,
appuyez sur la touche REC/OTR
pour commencer l’enregistrement
avec minuterie par simple pression.
Pour sélectionner un temps
d’enregsitrement fixe, appuyez
plusieurs fois sur la touche
REC/OTR.
Pour annuler l’enregistrement avec
minuterie par simple pression
pendant le temps spécifié, appuyer
sur la touche STOP C.
RETURN
VCR functions
1
Quand l’enregistrement avec
minuterie par simple pression est
terminé, l’appareil se met
automatiquement hors tension.
Changing the SETUP menu
Cette fonction permet de régler la
longueur d’enregistrement en
appuyant sur la touche REC/OTR
de la télécommande ou sur le
panneau avant de l’appareil.
D’abord :
Editing
Enregistrement avec minuterie par simple pression
(OTR)
Playing discs
Mode SP
Mode SLP
2
VCR
SLOW
Recording
Tipe de cassette
Durée de
l’enregistrement/lecture
T60
T120
T160
1 heure
2 heures 2-2/3 heures
3 heures
6 heures
8 heures
Appuyer sur la touche
REC/OTR pour démarrer
l’enregistrement.
Pour temporairement arrêter l’enregistrement ou le reprendre, appuyer
sur la touche PAUSE F. Après être
resté en mode de pause 5 minutes,
l’appareil s’arrête automatiquement
pour protéger la cassette et la tête
vidéo contre les dommages.
SETUP
Getting started
Vitesse
de la bande
RETURN
1
Connections
Avant l’enregistrement, vérifier que:
• La chaîne souhaitée est
sélectionnée en appuyant sur les
touches numériques de la
télécommande ou sur les touches
CHANNEL K/L sur le panneau
avant de l’appareil.
• Il y a une cassette avec ergot
d’enregistrement dans l’appareil.
• La vitesse d’enregistrement
souhaitée (SP – lecture standard
ou SLP – lecture super longue)
peut être sélectionnée en
appuyant sur la touche REC
SPEED sur la télécommande.
Vitesse d’enregistrement :
VCR
Français
115
E9460UD(EN/ SP/FR)
.qx3
04.8.10
10:48
Page 116
LIMITED WARRANTY
FUNAI CORP. will repair this FUNAI product, free of charge in the USA in the event of defect in materials
or workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year
from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are
excluded from this warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the
date of original retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be required together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,
missing or if service was attempted by an unauthorized service center. This FUNAI Limited warranty does
not apply to any product not purchased and used in the United States.
This product is produced for home use and this warranty only covers failures due to defects in material or
workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which
results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper
maintenance, commercial use such as hotel, rental or office use of this product or damage which results
from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT
REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR
MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY
THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART
OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST
BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID
WHEN THE UNIT IS CARRIED-IN TO A FUNAI AUTHORIZED SERVICE FACILITY.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT
FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
To locate your nearest FUNAI Authorized Service Center or for general service procedure, please call 1-800-605-8453 or write to the following:
FUNAI CORPORATION, INC.
SERVICE CENTER
19900 Van Ness Avenue, Torrance, CA 90501
Tel :1-800-605-8453
http://www.funai.us
Head Office: 100 North Street, Teterboro, NJ 07608
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
Printed in China
1VMN20226 / E9460UD ★★★★★
Download PDF

advertising