Canon 6024B001 Digital Camera User Manual

HT902SB-R1.NA1ULLA_ENG_MFL34656568
DVD RECEIVER
OWNER’S MANUAL
MODEL: LHT754
Main Unit - LHT754
Speakers - SH92SB-S
SH92SB-C
SH92SB-W
R
Before connecting, operating or adjusting this product, please
read this instruction booklet carefully and completely.
For service/
support Call:
Toll Free Number
© Copyright 2007, LG Electronics U.S.A., Inc.
1-800-243-0000
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a confined space
such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect
it from overheating.
The openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface. This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
the manufacturer's instruction have been adhered to.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
CLASSE 1 PRODUIT LASER
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future reference.
Should the unit require maintenance, contact an authorized
service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as vases, should be placed on the apparatus.
2
CAUTION concerning the Power Cord
Most appliances should be placed on a dedicated
circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch
circuits. Check the specification page of this owner's
manual to be certain.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug
it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an
authorized servicer.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance.
To disconnect power from the unit, unplug the unit from
the outlet. When installing the product, ensure that the
plug is easily accessible.
FCC WARNING: This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the
modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is
made.
REGULATORY INFORMATION: FCC Part 15
This epuipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
product is operated in a residential installation. This product
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
product does cause harmful interference to radio or
television reception, which can be determined by turning the
product off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and
receiver.
• Connect the product into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
FCC COMPLIANCE: The responsible party for this product’s
compliance is:
Marketed and Distributed by LG Electronics U.S.A., Inc.,
1000 Sylvan Avenue, Englewood Cliffs, NJ.
Phone: 1-201-816-2000.
IMPORTANT SAFETY INSTRUCTIONS
Introduction
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S
MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE
REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following
procedures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and
operating instructions should be read before the
product is operated.
2. Keep these instructions. - The safety, operating and
use instructions should be retained for future
reference.
3. Heed all warnings. - All warnings on the product and
in the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use
instructions should be followed.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
5. Do not use this apparatus near water. – For
example: near a bath tub, wash bowl, kitchen sink,
laundry tub, in a wet basement; or near a swimming
pool; and other areas located near water.
6. Clean only with dry cloth. – Unplug this product
from the wall outlet before cleaning. Do not use liquid
cleaners.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over-heating. The
openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s
instructions have been adhered to.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
3
Introduction
Maintenance and Service
Before use . . . . . . . . . . . .
Front Panel/Rear Panel . .
Remote Control . . . . . . . .
Maintenance and Service
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.4
.5
.6
.7
Installation and Setup
TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . .8
Optional Equipment Connection . . . . . . . . . . . .9
USB connection . . . . . . . . . . . . . . . . . . . . . . .9
AUX IN connection . . . . . . . . . . . . . . . . . . . . .9
OPTICAL IN connection . . . . . . . . . . . . . . . . .9
AUDIO IN connection . . . . . . . . . . . . . . . . . . .9
iPod connection . . . . . . . . . . . . . . . . . . . . . . . .9
Antenna Connection . . . . . . . . . . . . . . . . . . . .10
Speaker System Connection . . . . . . . . . . . . . .10
HDMI Connection . . . . . . . . . . . . . . . . . . . . . .11
Displaying Disc Information on-screen . . . . . .12
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . .12
General Operation . . . . . . . . . . . . . . . . . . . .12-14
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . .12
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
5.1 Speaker Setup . . . . . . . . . . . . . . . . . . . . .13
LOCK (Parental Control) . . . . . . . . . . . . . . . .14
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Operation
General features . . . . . . . . . . . . . . . . . . . . . . .15
Additional features . . . . . . . . . . . . . . . . . . . . .16
Playing an Audio CD or MP3/WMA file . . . . . .17
Programmed Playback . . . . . . . . . . . . . . . . . .17
Viewing a JPEG file . . . . . . . . . . . . . . . . . . . .18
Playing a DivX Movie file . . . . . . . . . . . . . . . .19
Using iPod . . . . . . . . . . . . . . . . . . . . . . . . .20-21
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . . .22
Presetting the Radio Stations . . . . . . . . . . . . .23
Listening to the Radio . . . . . . . . . . . . . . . . . . .23
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . .24
Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Selecting input source . . . . . . . . . . . . . . . . . . .24
XTS/XTS pro . . . . . . . . . . . . . . . . . . . . . . . . . . .24
VIRTUAL sound . . . . . . . . . . . . . . . . . . . . . . . .24
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .24
XM Satellite Radio Operation . . . . . . . . . . .25-26
Controlling your TV with the Suppllied
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .27
Controlling other TVs with the Supplied
Remote Control . . . . . . . . . . . . . . . . . . . . . .27-28
Reference
Language Codes . . . . . . . . . . . . . . . . . . . . . . .29
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Troubleshooting . . . . . . . . . . . . . . . . . . . . .30-31
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .32
4
Refer to the information in this chapter before
contacting a service technician.
Handling the unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping the exterior surfaces clean
Do not use volatile liquids such as insecticide spray
near the unit.
Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The DVD/CD Receiver is a high-tech, precision
device. If the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality could be
diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service center.
What is SIMPLINK?
Some functions of this unit are controlled by TV’s
remote control when this unit and LG TV with
SIMPLINK are connected through HDMI
connection.
• Controllable functions by LG TV’s remote control;
Play, Pause, Scan, Skip, Stop, Power Off,
etc.
• Refer to the TV owner’s manual for the details of
SIMPLINK function.
• LG TV with SIMPLINK function has the logo as
shown above.
Introduction
Types of Playable Discs
DVD
(8 cm / 12 cm disc)
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future
reference.
This manual provides information on the operation
and maintenance of your DVD/CD Receiver. Should
the unit require service, contact an authorized service
location.
About the
Symbol Display
“
” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
DVD video disc.
Symbol Used in this Manual
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play a DVD±R, DVD±RW,
and CD-R or CD-RW that contains audio titles, MP3,
WMA, JPEG or DivX files.
Notes:
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD-RW,
DVD+RW) disc itself, some CD-R/RW (or DVD-RW,
DVD+RW) discs may not be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). It may result in malfunctions.
Note:
Indicates special notes and operating features.
Regional Code
Tip:
Indicates tips and hints for making the task easier.
This unit has a regional code printed on the rear of the
unit. This unit can play only DVD discs labelled as the
same as the rear of the unit or “ALL”.
A section whose title has one of the following symbols
is applicable only to the disc represented by the
symbol.
Notes on Regional Codes
DVD
DVD
ACD
Audio CDs
MP3
MP3 files
WMA
WMA files
JPEG
JPEG files
DivX
DivX files
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished
works. Copyright 1992-1997 Dolby Laboratories. All rights
reserved.
Manufactured under license from Digital Theater Systems,
Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and other U.S. and worldwide patents issued and pending. "DTS" and "DTS Digital
Surround” are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2003 Digital Theater
Systems, Inc. All Rights Reserved.
Introduction
Before use
Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your DVD player’s regional
code or the disc cannot play.
If you try to play a DVD with a different regional
code from your player, the message “Check
Regional Code” appears on the TV screen.
Remote Control Operation Range
Point the Remote Control at the Remote Sensor and press
the buttons.
Distance: About 23 ft (7 m) from the front of the Remote
Sensor
Angle: About 30° in each direction in front of the Remote
Sensor
Remote Control battery installation
Remove the battery cover on the rear of
the Remote Control, and insert two R06
(size AA) batteries with
and
aligned correctly.
5
Front Panel/Rear Panel
POWER
DISC Tray
DISPLAY Window
VOLUME controller
TUNING(-/+)/SKIP/
./>
>)
SEARCH(.
STOP (x)
Remote Sensor
AUDIO IN connector
PAUSE (X)/
MONO/STEREO (ST.)
USB port
Connect to a USB port of a memory
device (USB memory etc.)
FUNC.(-)/PLAY(B)
Press and hold down this button
about 3 seconds, then press
repeatedly to select other function.
OPEN/CLOSE button
Power Cord
SPEAKER connectors
FM Antenna connector
AUX AUDIO Input
(L/R) connector
Cooling fan
MONITOR
INPUT
L - AUX - R
HDMI OUT
Y
PB
PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
XM IN
i Pod
OPTICAL IN connector
AM Loop Antenna connectors
MONITOR OUT connector
COMPONENT VIDEO OUT terminals
Connect to a TV with Y PB PR inputs.
TRANSMITTER (DC 7V OUT)
Connect a wireless transmitter.
XM IN Connector
Connect an XM Passport System
to this terminal. (sold separately.)
iPod Connector
Connect a dock connector of iPod. (Sold separately.)
HDMI OUT
HDMI output providing a high quality interface for digital audio and video.
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause
permanent damage to the unit.
Wireless transmitter receiver kit not supplied. We urge you to purchase such a kit to avoid
cumbersome wires running front to back on the floor.
6
Remote Control
Z)
OPEN/CLOSE (Z
Opens and closes the disc tray.
DVD
TUNER
Selects the System’s tuner (FM ,AM and
XM bands).
AUX
Selects input source.
TUNER
DVD
USB
iPod
USB
Plays the multimedia files.
DIMMER
Changes brightness of the display
window on the front panel during in
power-on status.
OPEN/CLOSE
POWER
AUX
CLEAR
CLEAR
REPEAT A-B
MARKER
SEARCH
Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
SCAN +
MARKER
+
SKIP
Marks a point during playback.
STOP
TITLE
PLAY
PAUSE/STEP
SETUP
MENU
SCAN/SLOW(bb/BB)
DISPLAY
RETURN
Searches backward or forward.
Reverse/Forward slow playback.
XM CH
./>
>)
SKIP (.
Moves to the previous or next
chapter or track.
TITLE
Repeats chapter, track, title, all
XM CH
ENTER
Repeats sequence.
MENU
Displays the disc’s Title menu, if
available.
Accesses the menu on a DVD disc.
ZOOM
Enlargres video image.
SLEEP
VOL
SETUP
Accesses or removes setup menu.
MUTE
DISPLAY
RETURN
SLEEP
Removes the menu.
Sets the System to turn off
automatically at a specified time.
b/B/v/V (left/right/up/down)
Selects an option in the menu.
CAT/HDMI
XM MODE/RESOL.
Acknowledges the menu selection.
PRESET (-/+)
PROG./MEMO.
Selects programme of Radio.
XM CH (-/+)
Tunes in the desired radio station.
0-9 numerical buttons
Selects a service, program number
directly or selects numbered options in
a menu.
CAT
Selects the Category Search.
HDMI
Switches the HDMI mode to HDMI
(active) and OFF (inactive).
MUTE
Turns the sound on and off
temporarily.
VOLUME (-/+)
Adjusts speaker volume.
POWER
Tunes in the desired XM station.
TUN. (-/+)
x), PLAY (B)
STOP (x
X)
PAUSE/STEP (X
VSM
XTS pro
Supplies more natural and realistic
sound.
Supplies great sound effect.
Accesses On-Screen display.
ENTER
SEARCH
Displays MARKER SEARCH menu.
ZOOM
REPEAT
REPEAT A-B
S-TITLE
S-TITLE
SCAN
SOUND
Selects the sound mode.
Selects the iPod source.
SOUND
AUDIO
AUDIO
Selects an audio language (DVD) or an
audio channel (CD).
iPod
Selects a subtitle language (DVD).
DIMMER
REPEAT
Selects the output source (CD/DVD).
Introduction
POWER
XM MODE
CHANNEL
INPUT
VOL
Selects a XM display mode.
RESOL.
Changes the resolution depending on
your TV.
PROG./MEMO.
Accesses or removes Program menu.
Enter a radio station’s frequency into
the tuner.
TV Control Buttons
- POWER: Switches TV ON and
OFF.
- CHANNEL v/V: Selects TV’s
channel.
- VOLUME +/–: Adjusts TV’s
volume.
- INPUT: Selects the TV’s source.
7
Installation and Setup
TV Connection
Make one of the following connections, depending on
the capabilities of your existing equipment.
Tips:
Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the DVD/CD Receiver. Use one of the
connections described below.
Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
make the best connections.
Caution:
Make sure the DVD/CD Receiver is connected
directly to the TV. Select the correct AV input on
your TV.
Do not connect your DVD/CD Receiver to the TV
via your VCR. The DVD image could be distorted
by the copy protection system.
INPUT
L - AUX - R
HDMI OUT
Y
PB
PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
V
VIDEO
INPUT
C
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Y
L
Rear of TV
8
Connect the MONITOR OUT jack from the DVD/CD
Receiver to the VIDEO IN jack on the TV using the
video cable supplied (V).
Component Video (Color Stream®) connection
Connect the COMPONENT VIDEO OUT jacks from
the DVD/CD Receiver to the corresponding jacks on
the TV using a Y PB PR cable (C).
If your television is a high-definition or “digital
ready” television, you may take advantage of the
DVD/CD Receiver’s progressive scan output for the
highest video resolution.
If your TV does not accept your resolution setting,
abnormal picture appears on the screen. Please
read owner’s manual for TV then set the resolution
that your TV can accept.
Note:
The HDMI mode must be set to OFF for VIDEO OUT
and Component video connections.
Rear of DVD/CD Receiver
MONITOR
Video connection
XM IN
i Pod
Optional Equipment Connection
OPTICAL IN connection (O)
Auxiliary device
DVD Player
(or Digital
Device, etc)
OUT
IN
AUDIO (L)
U
Connect an optical output of DVD Player (or Digital
Device etc) to the OPTICAL IN connector.
VIDEO
AUDIO IN connection (D)
AUDIO (R)
Connect a output of portable device (MP3 or PMP etc)
to the AUDIO input connector.
OPTICAL
OUT
To AUDIO OUT (L/R)
USB Memory, MP3 Player (or
Memory Card Reader, etc.)
A
To AV IN AUDIO (L/R)
O
MONITOR
INPUT
L - AUX - R
HDMI OUT
Y
PB
PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
XM IN
i Pod
To AUDIO IN
Rear of DVD/CD Receiver
D
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
Installation and Setup
USB connection (U)
To AUDIO OUT
Portable device
Removing the USB Device from the unit
1. Choose a different function mode or press STOP
(x) twice in a row.
2. Remove the USB device from the unit.
Notes:
Don’t extract the USB device while operating.
Music files (MP3/WMA), image files (JPEG) and
video files can be played.
This unit cannot use a USB HUB.
Recommended Memory Cards.
Compact Flash Card (CFC), Micro Drive (MD), Smart
Media Card (SMC), Memory Stick (MS), Secure Digital
Card (SD), Multimedia Card (MMC), Memory Stick Pro
(MS-Pro)
- Compatible with: FAT16, FAT32
- Only use the memory cards recommended.
Devices which require additional program
installation when you have connected the unit to a
computer are not supported.
In case of a USB HDD, make sure to connect an
auxiliary power cord to the USB HDD for proper
operation. Up to four primary partitions of a drive are
supported. If there is an extension partition, it will not
be supported.
If the drive of USB device is two or more, a drive
folder is displayed on the screen. If you want to
move to the initial menu after you select a folder,
press RETURN.
Digital cameras and mobile phones are not
supported.
iPod connection
Connect the iPod connector on the rear of the DVD/
CD Receiver to the dock connector of iPod using an
iPod cable (I).
Rear of DVD/CD Receiver
MONITOR
INPUT
L - AUX - R
HDMI OUT
Y
iPod
PB
PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
XM IN
i Pod
I
Notes:
Depending on the type of iPod, you may need to
insert one of the dock adapters into the dock slot
before you station your iPod.
Adjust the volume to a moderate level before you
connect your iPod and this unit.
AUX IN connection (A)
Connect a Output of auxiliary device to the AUX
AUDIO Input (L/R) Connector.
9
Antenna Connection
Speaker System Connection
Connect the supplied FM/AM antenna for listening to
the radio.
Connect the speakers using the supplied speaker
wires.
Connect the AM Loop antenna to the AM antenna
connector.
Connect the FM Wire antenna to the FM antenna
connector.
Notes:
To obtain the best possible surround sound, adjust the
speaker parameters (volume, distance, etc.).
Front speaker
(Left)
Front speaker
(Right)
To prevent noise pickup, keep the AM Loop antenna away
from the DVD/CD Receiver and other components.
Be sure to fully extend the FM wire antenna.
After connecting the FM Wire antenna, keep it as
horizontal as possible.
Center speaker
AM Loop Antenna
(supplied)
FM Wire Antenna
(supplied)
Rear speaker
(Right surround)
Rear speaker
(Left surround)
MONITOR
INPUT
L - AUX - R
HDMI OUT
Y
PB
PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
XM IN
i Pod
Subwoofer
Notes:
Be sure to match the speaker wire to the
appropriate terminal on the components: + to + and
– to –. If the cables are reversed, the sound will be
distorted and will lack bass.
If you use front speakers with low maximum input
rating, adjust the volume carefully to avoid
excessive output on the speakers.
10
HDMI Connection
Rear of DVD/CD Receiver
About HDMI
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for an
easy all- digital output to an HDMI or DI-equipped TV.
MONITOR
HDMI OUT
Y
Connection to an HDMI TV requires an HDMI cable
while connection to a DVI-equipped TV requires a DVI
adapter besides a HDMI cable.
If you have a HDMI TV or monitor, you can connect
it to this DVD/CD Receiver using a HDMI cable.
1. Connect the HDMI OUT jack on the DVD/CD
Receiver to the HDMI jack on a HDMI compatible
TV or monitor (H).
2. Set the TV’s source to HDMI (refer to owner’s
manual for TV).
3. In the stop mode, select HDMI mode by pressing
HDMI. Press RESOL. repeatedly to select the
resolution you wish to change.
Notes:
The arrow on the cable connector body should face
up for correct alignment with the connector on the
DVD/CD Receiver.
If HDMI cable is not connected, the HDMI button
does not operate.
If there is noise or there are lines
on the screen, please check
the HDMI cable.
Not all HDCP-compatible
DVI devices will work with
this DVD/CD Receiver.
If TV does not support HDCP, snow noise appears
on the screen, or picture may be vibrated.
Tip :
When you use HDMI connection, you can change the
resolution (480p, 720p, 1080i) for the HDMI output by
pressing RESOL. on the Remote Control.
Important Note
If you turn off the TV or disconnect the HDMI cable
during playback of the device, playback will pause.
You have to click on the play button to play back
again.
For some TVs, when you change the TV mode, such
condition specified above may happen.
PB
PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
XM IN
i Pod
H
(Not supplied)
HDMI
HDMI compatible TV
Resolution setting
You can change the resolution for the COMPONENT
VIDEO OUT by pressing RESOL. on the Remote
Control. Available resolution settings are as shown
below.
OUTPUT
CONNECTION
HDMI
VIDEO OUT
COMPONENT
VIDEO OUT
MONITOR OUT
Installation and Setup
HDMI has the capability to support standard,
enhanced, or high-definition video plus standard to
multi-channel surround-sound audio, HDMI features
include uncompressed digital video, a bandwidth of up
to 5 gigabytes per second, one connector (instead of
several cables and connector), and communication
between the AV source and AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
INPUT
L - AUX - R
Available Resolution
920 x 1080i
1280 x 720p
720 x 480p
1920 x 1080i
1280 x 720p
720 x 480p
720 x 480i
720 x 480i
Notes:
If the picture does not appear on the screen with
the analog video connections, change the
resolution to 480i.
For 720p and 1080i resolution on the component
video out, only non-copy protected discs can be
played back. If the disc is copy protected, it will be
displayed at the 480p resolution.
1080i, 720p, and 480p does not work with the
analog video connections (MONITOR OUT).
The component (Y/PB/PR) will output to black
picture in the RGB mode.
If you change the resolution, the display MENU
(MP3/JPEG/DivX) size is changed.
If your TV does not accept your resolution setting,
abnormal picture appears on the screen.
Please read owner’s manual for TV, and then set
the resolution that your TV can accept.
Caution:
Changing the resolution when the DVD/CD Receiver
is connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
DVD/CD Receiver and then turn it on again.
11
Displaying Disc Information
On - screen
LANGUAGE
LANGUAGE
You can display various information about the disc
loaded on-screen.
OSD
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
1. Press DISPLAY to show various playback
information.
The displayed items differ depending on the disc
type or playing status.
2. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
Title (Track) – Current title (or track) number/
total number of titles (or tracks).
Chapter – Current chapter number/total number
of chapters.
Time – Elapsed playing time.
Audio – Selected audio language or channel.
Subtitle – Selected subtitle.
Angle – Selected angle/total number of angles.
Sound – Selected sound mode.
Note:
If any button is not pressed for a few seconds, the onscreen display disappears.
Move
Select
OSD
Select a language for the Setup menu and then onscreen display.
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original – Refers to the original language in which
the disc was recorded.
Other – To select another language, press
numeric buttons and then ENTER to enter the
corresponding 4-digit number according to the
language code list on the page 29. If you enter the
wrong language code, press CLEAR.
Initial Settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see the pages 12 to 14.
DISPLAY
DISPLAY
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press B on the Remote Control.
To go back to the previous level:
Press b on the Remote Control.
GENERAL OPERATION
1. Press SETUP. The Setup menu appears.
2. Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
3. Use v / V to select the second desired option and
then press B to move to the third level.
4. Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5. Press SETUP or PLAY to exit the Setup menu.
12
TV Aspect
16 : 9
Display Mode
Widescreen
Progressive Scan
Off
Move
Select
TV Aspect
4:3 – Select when a standard 4:3 TV is connected.
16:9 – Select when a 16:9 wide TV is connected.
Display Mode
The display Mode setting works only when the TV
Aspect mode is set to “4:3”.
Letterbox – Displays a wide picture with bands on
the upper and lower portions of the screen.
Panscan – Automatically displays the wide picture
on the entire screen and cuts off the portions that
do not fit.
AUDIO
5.1 Speaker Setup
Each DVD disc has a variety of audio output options.
Set the receiver’s AUDIO options according to the
type of audio system you use.
Make the following settings for the built-in 5.1 channel
surround decoder.
1. Press ENTER, and the 5.1 Speaker Setup menu
appears.
AUDIO
Select
DRC
On
Vocal
On
HD AV Sync
0 ms
AUDIO
Speaker
Size
Small
Volume
0
dB
Distance
0
m
Test
Move
Front L
Off
Select
Select
Move
Return
Enter
Dynamic Range Control (DRC)
2. Use b / B to select the desired speaker.
With the DVD* format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the quietest ones). Then, you may
listen to a movie at a lower volume without losing
clarity of sound. Set DRC to On for this effect.
*1: Dolby Digital only
3. Adjust options using v / V / b / B buttons.
1
Vocal
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
HD AV Sync
When using Digital TV.
Sometimes AV signal could not be transmitted
simultaneously because of later transmission of video
signal compared to audio signal.
Because it takes some time to convert analog video
signal to digital one in the Digital TV.
And It means that you may not enjoy picture on the
screen and sound from speaker at the same time
even though it is one scene.
In the HD AV Sync menu, you could adjust delay time
to audio signal for simultaneous AV signal
transmission
Delay time could be set up with 10msec unit.
(0 ~ 300ms)
Delay time is different according to each TV Brand.
So you need to adjust optimal delay time complying
with your TV.
Installation and Setup
5.1 Speaker Setup
4. Press ENTER to confirm your selection. Returns to
the previous menu.
Speaker selection
Select a speaker that you want to adjust. [Front
speaker (Front L), Front speaker (Front R), Center
Speaker (Center), Subwoofer (SubWoofer), Rear
speaker (Rear L), Rear speaker (Rear R)]
Note:
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Size
Since the speaker settings are fixed, you cannot
change the settings.
Volume
Press b / B to adjust the output level of the selected
speaker. (-5dB ~ 5dB)
Distance
If you connected speakers to your DVD/CD Receiver,
setting the Distance lets the speakers know how far
the sound has to travel to reach your set listening
point. This allows the sound from each speaker to
reach the listener at the same time.
Press b / B to adjust the Distance of the selected
speaker. (You can’t adjust front / Woofer speakers)
Test
Press b / B to test the signals of each speaker. Adjust
the volume to match the volume of test signals
memorized in the system.
Front Left (Front L) → Center → Front Right (Front R)
→ Rear Right (Rear R) → Rear Left (Rear L) →
SubWoofer
13
LOCK (Parental Control)
OTHERS
OTHERS
LOCK
Rating
Unlock
Password
****
Area Code
US
US
Move
DivX(R) Registration
Select
Rating
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
1. Select “Rating” on the LOCK menu then press B.
2. To access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
Input a password and press ENTER. Enter it again
and press ENTER to verify. If you make a mistake
before pressing ENTER, press CLEAR.
3. Select a rating from 1 to 8 using the v / V buttons.
Rating 1-8: Rating one (1) has the most restrictions
and rating eight (8) is the least restrictive.
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
4. Press ENTER to confirm your rating selection, then
press SETUP to exit the menu.
Password
You can enter or change password.
1. Select Password on the LOCK menu and then
press B.
2. Follow the step 2 as shown above (Rating).
To change the password, press ENTER when the
“Change” option is highlighted. Input a password
and press ENTER. Enter it again and press
ENTER to verify.
3. Press SETUP to exit the menu.
If you forget your password
If you forget your password, you can clear it using the
following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and press
ENTER. The password is cleared.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
page 29.
1. Select “Area Code” on the LOCK menu then
press B.
2. Follow step 2 as shown in the rating section.
3. Select the first character using v / V buttons.
4. Press B and select the second character using
v / V buttons.
5. Press ENTER to confirm your Area code selection.
14
Select
Move
Select
DivX(R) Registration
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase
videos based on the DivX® VOD service. For more
information, visit www.divx.com/vod.
1. Select “DivX(R) Registration” option and then
press B.
2. Press ENTER while “Select” is selected and the
registration code will appear.
Use the registration code to purchase or rent the
videos from DivX® VOD service at
www.divx.com/vod. Follow the instructions and
download the video onto a disc for playback on
this unit.
3. Press ENTER to exit.
Note:
All the downloaded videos from DivX® VOD can only
be played back on this unit.
Operation
General features
Buttons
Operations
Z (OPEN / CLOSE)
Opens or closes the disc tray.
X (PAUSE)
During playback, press X to pause playback.
ALL
Press X repeatedly to play Frame-by-Frame.
DVD
During playback, press SKIP (. or >) to go to the next
chapter/track or to return to the beginning of the current
chapter/track.
ALL
SKIP (. / >)
Discs
ALL
DivX
Press SKIP . twice briefly to step back to the previous
chapter/track.
SCAN (m / M)
During playback, press SCAN (m or M) repeatedly to
select the required scan speed.
DVD : bb, bbb, bbbb, bbbbb, bbbbbb or
BB, BBB, BBBB, BBBBB, BBBBBB
DivX disc : bb, bbb, bbbb, bbbbb or
BB, BBB, BBBB, BBBBB
WMA/MP3, Audio CD : m (X2, X4, X8) or M (X2, X4, X8)
DVD
DivX
ACD
MP3
During playback, press REPEAT repeatedly to select a
desired repeat mode.
DVD Video discs: Chapter/Title/Off
Audio CD, DivX/MP3/WMA discs: Track/All/Off
ALL
REPEAT A-B
During playback, press REPEAT A-B to select a point A and
a point B and repeats a sequence from point A (Starting
point) to point B (End point).
Press REPEAT A-B to exit.
DVD
ZOOM
During playback or in the pause mode, press ZOOM to
enlarge the video image (3 steps).
You can move through the zoomed picture using b B v V
buttons.
DVD
TITLE
If the current DVD title has a menu, the title menu appears
on the screen. Otherwise, the disc menu may appear.
DVD
MENU
The disc menu appears on the screen.
DVD
During playback, press S-TITLE repeatedly to select a
desired subtitle language.
DVD
DivX
DVD
DivX
(SUBTITLE)
(AUDIO language) During playback, press AUDIO repeatedly to hear a different
audio language or audio track.
SLOW
In the pause mode, press SCAN (m or M) to select the
required speed.
DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)
Operation
REPEAT
WMA
DVD
15
Notes on general features:
Zoom may not work on some DVDs.
The A-B repeat function is available only in the
current title.
Additional features
1.5 times speed playback
DVD
ACD
MP3
WMA
You can play at 1.5 times speed.
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed on the disc.
1. During playback, press PLAY(B) to play at 1.5
times speed. “BX1.5” appears on the screen.
2. Press PLAY(B) again to exit.
Time Search
DVD
DivX
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback.
2. Press v / V to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
4. Press ENTER to confirm. Playback starts from the
selected time.
Marker Search
DVD
DivX
To enter a Marker
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the
marked scene. Or press CLEAR and the marker
number is erased from the list.
4. You can play any marker by inputting its number
on the marker search menu.
16
Screen Saver
The screen saver appears when you leave the unit in
Stop mode for about five minutes.
Last Scene Memory
DVD
This receiver memorizes the last scene from the last
disc that is viewed. The last scene remains in the
memory even if you remove the disc from the receiver
or switch off the receiver. If you load a disc that has
the scene memorized, the scene is automatically
recalled.
Note:
This receiver does not memorize the scene of a disc if you
switch off the receiver before commencing to play the disc.
This unit can play Audio CDs or MP3/WMA files.
MP3/ WMA/ Audio CD
Once you insert a CD with MP3/WMA files or Audio,
a menu appears on the TV screen.
Press v / V to select a track/file and then press PLAY
or ENTER, and playback starts. You can use variable
playback functions. Refer to the page 15.
ID3 TAG
When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY. (Song, Artist, Album, Genre, Comment)
Tips:
Press MENU to move to the next page.
On a CD with MP3/WMA and JPEG, you can
switch MP3/WMA and JPEG. Press TITLE, and
MUSIC or PHOTO top of the menu is highlighted.
MP3 / WMA disc compatibility with this player is limited
as follows:
• Sampling frequency: within 32 - 48 kHz (MP3),
within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
• The DVD/CD Receiver cannot read an MP3/WMA file
that has a file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that cannot
create a file system (eg. Direct-CD) it is impossible to
playback MP3 / WMA files.We recommend that you use
Easy-CD Creator, which creates an ISO 9660 file
system.
• File names should have a maximum of 8 letters and
must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as / ? * : “
< > l etc.
• The total number of files on the disc should be less than
999.
This DVD/CD Receiver requires discs and recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compatible
playback.
Customers should note that permission is required in
order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such
permission. Permission should always be sought from
the copyright owner.
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the receiver memory. A
program can contain 300 tracks.
1. Insert a disc.
Audio CD and MP3/WMA Discs:
2. Select a track on the “List” and then press PROG.
or select “
(Add)” icon and then press ENTER
to place the selected track on the “Program” list.
Repeat to place additional tracks on the list.
Note:
You can add all tracks in the disc. Select “
then press ENTER.
(Add All)” icon
3. Select the track you want to start playing on the
“Program” list. Press MENU to move to the next
page.
4. Press PLAY or ENTER to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.
5. To resume normal playback from programmed
playback, select a track of AUDIO CD (or
MP3/WMA) list and then press PLAY.
Repeat Programmed Tracks
1. Press REPEAT when playing a disc. The repeat
icon appears.
2. Press REPEAT to select a desired repeat mode.
• TRACK: repeats the current track
• ALL: repeats all the tracks on programmed list.
• Off (No display): does not play repeatedly.
Operation
Playing an Audio CD or
MP3/WMA file
Erasing a Track from “Program” List
1. Use v V to select the track that you wish to erase
from the Program list.
2. Press CLEAR. Alternatively, select “
(Delete)”
icon then press ENTER to place the selected track
on the Program list. Repeat to erase additional
tracks on the list.
Erasing the Complete Program List
Use v / V to select “
ENTER.
(Del all)” and then press
Note:
The programs are also cleared when the disc is removed.
17
Viewing a JPEG file
JPEG
This unit can play discs with JPEG files.
Before playing JPEG recordings, read the notes on
JPEG Recordings on the right.
1. Insert a disc and close the tray.
The PHOTO menu appears on the TV screen.
PHOTO
List
Preview
JPEG Folder 1
JPEG disc compatibility with this player is
limited as follows:
• Depending upon the size and the number of
JPEG files, it could take a long time for the
DVD/CD Receiver to read the disc’s contents. If
you don’t see an on-screen display after several
minutes, some of the files may be too large —
reduce the resolution of the JPEG files to less
than 2M pixels as 2760 x 2048 pixels and burn
another disc.
JPEG Folder 2
JPEG Folder 3
• The total number of files and folders on the disc
should be less than 999.
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
JPEG Folder 8
• Some discs may not operate due to a different
recording format or the condition of disc.
2. Press v / V to select a folder, and then press
ENTER. A list of files in the folder appears.
If you are in a file list and want to return to the
previous Folder list, use the v / V buttons on the
Remote Control to highlight
and press ENTER.
3. If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY. While
viewing a file, you can press STOP to move to the
previous menu (JPEG menu).
Note:
When viewing a JPEG file, the resolution is changed 480p if
the resolution set to 1080i. You can change the resolution for
720p or 480p.
Tips:
There are four Slide Speed options
:
> (Slow), >> (Normal), >>> (Fast) and II (off).
Use v /V /b /B to highlight the Speed. Then, use b / B
to select the option you want to use and then press
ENTER.
If you set Speed option to Off, the slide is not active.
Slide Show
Use v V b B to highlight the
press ENTER.
(Slide Show) then
Still Picture
1. Press PAUSE/STEP during the slide show.
The DVD/CD Receiver will now go into the PAUSE
mode.
2. To return to the slide show, press PLAY or press
PAUSE/STEP again.
Moving to another File
Press SKIP (. or >) once during viewing a
picture to advance to the next or previous file.
Rotating the picture
Press v V b B during showing a picture to rotate the
picture clockwise or counter-clockwise.
18
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
• If the files have “.jpe” or “.jpeg” extensions,
please rename them as “.jpg” file.
• File names without “.jpg” extension will not be
able to be read by this DVD/CD Receiver. Even
though the files are shown as JPEG image files in
Windows Explorer.
Playing a DivX Movie file
Using this DVD/CD Receiver you can play DivX disc.
DivX disc compatibility with this player is limited
as follows:
1. Insert a disc and close the tray. The MOVIE menu
appears on the TV screen.
• Available resolution size of the DivX file is under
800x600 (W x H) pixel.
MOVIE
0:00:00
• The file name of the DivX subtitle is available by
45 characters.
List
Movie Folder 1
Movie Folder 2
Movie Folder 3
Movie Folder 4
Movie Folder 5
Movie Folder 6
• If there is impossible code to express in the DivX
file, it may be displayed as " _ " mark on the
display.
Movie Folder 7
Movie Folder 8
3. If you want to view a particular file, press
v / V to highlight a file and press ENTER or PLAY.
4. Press STOP to exit.
Notice for displaying the Divx subtitle
If the subtitle does not display properly during playback,
press and hold S-TITLE for about 3 seconds then press
S-TITLE to select another language code until the
subtitle is displayed properly
Tips:
Press MENU to move to the next page.
On a CD with MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE, and MUSIC, PHOTO and MOVIE
word on top of the menu is highlighted.
Notes:
Be sure to select “SUBTITLE ON” mode by
pressing the subtitle file every time before playing a
DivX file .
• If the video and audio structure of recorded
files are not interleaved, either video or audio
is outputted.
Playable DivX file
• ".avi ", ".mpg ", ".mpeg ", ".divx"
Playable Subtitle format
• SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
VobSub(*.sub)
Playable Codec format
• "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ",
"MP43 ", "3IVX ".
Operation
2. Press v / V to select a folder and then press
ENTER. A list of files in the folder appears. If you
are in a file list and want to return to the Folder list,
use the v / V buttons on the Remote Control to
highlight
and press ENTER.
• If the number of the screen frame is over 30
per 1 second, this unit may not operate
normally.
Playable Audio format
"AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
• Sampling frequency: within 32 - 48 kHz (MP3),
within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3),
40 - 192kbps (WMA)
When the subtile has more than two languages in
the file, original subtile is only available.
You can not adjust sound mode and VIRTUAL
sound during the DivX file playing.
19
Using iPod
You can enjoy playback of your iPod using the
supplied remote control.
iPod is a trademark of Apple Computer, Inc, registered
in the U.S. and other countries.
• Compatibility with your iPod may vary depending
on the type of your iPod.
1. Connect your iPod and the unit with iPod cable.
Refer to the page 13.
• Depending on your iPod’s software version, it may
not be possible to control your iPod from the unit.
We recommend installing the latest software
version.
2. Turn the unit on.
Your iPod is automatically turned on.
• Adjust the volume to a moderate level before you
connect your iPod and this unit.
General operation
3. Press iPod on the remote control to enter the iPod
mode.
The iPod menu appears on the TV screen.
The initial screen of iPod menu is the OSD iPod
mode.
4. Use v / V and ENTER on the Remote Control to
display the list of menu.
5. Press ENTER to play.
General features
iPod
Remote Control
buttons
buttons
Operations
B (PLAY)
BX
During pause, press B to
resume playback.
X (PAUSE)
BX
During playback, press X
to pause playback.
-
During playback, press x
to stop playback. Press
ENTER to resume
playback.
x (STOP)
SKIP
(./>)
SCAN
(m / M)
During playback, press
./> SKIP (. or >) to go to
the next track or to return
to the beginning of the
current track. Press SKIP
. twice briefly to step
back to the previous track.
Music file: During playback,
press and hold SCAN (m or
M) and then release at a
point you want.
Video file: During playback,
press and hold SKIP (.
or >) and then release at
a point you want.
REPEAT
MENU
20
Notes:
• It works with all iPod models that have a dock
connector.
REPEAT During playback, press
REPEAT repeatedly to
select a desired repeat
mode. (Track/All/Off)
MENU Moves to the previous
menu.
Playing the iPod in the Remote iPod
mode
You can operate your iPod by using the supplied
remote control and controls on your iPod.
1. Press iPod on the Remote Control until “IPOD”
appears in the display window.
Note:
You can select the Remote iPod mode or OSD
iPod mode by pressing repeatedly iPod on the
remote control.
2. Use v / V and ENTER on the Remote Control or
controls on your iPod to display the list of menu by
viewing your iPod.
3. Press ENTER to play.
Notes:
• When you connect the unit and TV to MONITOR
IN/OUT, TV screen is turned off temporarily.
• Connect the MONITOR OUT jack on the rear of the
unit to the VIDEO IN jack on the TV using the video
cable if you want to view the video or photo file.
The images of video or photo files are outputted
only when you connect the unit to the MONITOR
OUT connector.
Playing the iPod in the OSD iPod
mode
You can operate your iPod by controlling OSD menu
on the TV screen with the supplied remote control.
The controls on your iPod are not operational in the
OSD iPod mode.
1. Press iPod on the Remote Control until “OSD
IPOD” appears in the display window.
2. Use v / V and ENTER on the Remote Control to
display the list of menu.
3. Press ENTER to play.
iPod message
Remote iPod
Please use Monitor output
for viewing Video and photo
from iPod.
When you connect the unit and
TV to COMPONENT VIDEO
IN/OUT or HDMI IN/OUT in the
Remote iPod mode, the screen
on the left appears.
Connect the unit and TV to
MONITOR IN/OUT.
When you select the Photos or
Videos menu in the OSD iPod
mode, the screen on the left
appears. Change the unit to the
Remote iPod mode.
When you connect the iPod that
is not supported on this unit, the
screen on the left appears.
Music
Classifies and plays the files by Playlists, Artists,
Albums, Genres, Songs, and Composers.
Photos / Videos
The video or photo file is not played in the OSD iPod
mode.
If you want to play the video or photo file, change to
the Remote iPod mode.
If the power of your iPod is
insufficient or the iPod is
misconnected or unknown
device, the screen on the left
appears.
Now Playing
Operation
Displays and plays the last played music file.
21
DVD Audio Discs
DVD Audio is a new disc format building on the
success of DVD to provide high quality,
uncompressed, multi-channel audio for a new
experience in audio quality. A DVD Audio disc can be
identified by the DVD audio logo on the disc jacket or
on the disc itself.
DVD Audio can provide higher quality stereo than
Audio CDs with a sampling rate of up to 192kHz
(compared to 44.1kHz for CDs). DVD Audio digital
sound can be delivered with up to 24 bits of data
(compared to 16 bits for a standard CD).
A typical DVD Audio disc contains up to seven times
the data capacity of a CD. This additional space is
used for music, either Advanced Resolution multichannel sound quality that is closer to the artist’s
master recording or for longer recordings. Many DVD
Audio discs contain on-screen text, such as artist
biographies, playlists, or lyrics. Some DVD Audio
discs contain photo galleries or video clips.
Note:
To enjoy maximum sound quality and surround effect
of DVD Audio, you must use 5.1 channel analog audio
output (5.1CH AUDIO OUT jacks on the DVD/CD
Receiver).
Moving to another GROUP
Some DVD Audio discs divide content into different
groups. Your player enables you to quickly access
different groups during playback via the on-screen
display.
1. Press DISPLAY during playback on in stop mode.
4 to select Group icon.
2. Press 3/4
3. Press 1/2 or the numbered buttons (0-9) to select
a group number.
Note:
Sometimes the author of the disc creates hidden
content that can only be accessed by entering a
password. If the lock icon appears on the TV screen,
enter the password (sometimes you’ll find it on the
disc’s jacket cover or on a web site). This password
control isn’t dictated by your DVD/CD Receiver — it is
a function of the disc.
Since the authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be
available for the disc you’re playing.
Viewing another PAGE
Since DVD Audio discs can hold a lot of content, there
are various ways to see what’s available on the disc.
1. Press DISPLAY during playback.
4 to select Page icon.
2. Press 3/4
3. Press 1/2 to select a page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc was created.
Note:
Since the authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be
available for the disc you’re playing.
22
Presetting the Radio Stations
Listening to the Radio
You can preset 50 stations for FM and AM (MW).
Before tuning, make sure that you have turned down
the volume.
Preset radio stations in the DVD/CD Receiver’s
memory first (see “Presetting radio stations” on the
left).
1. Press TUNER on the Remote Control until FM or
AM (MW) appears in the display window.
1. Press TUNER until FM or AM (MW) appears in the
display window.
2. And then every time you press TUNER, FM and
AM (MW) changes alternately.
3. Press and hold TUN.(-/+) for about two seconds
until the frequency indication starts to change,
then release.
Scanning stops when the DVD/CD Receiver tunes in a
station.
4. Press PROG./MEMO. on the Remote Control.
A preset number will flash in the display window.
5. Press PRESET (-/+) on the Remote Control to
select the preset number you want.
6. Press PROG./MEMO. on the Remote Control
again.
The station is stored.
7. Repeat steps 3 to 6 to store other stations.
The last received station is tuned in.
2. Press PRESET (-/+) repeatedly on the Remote
Control to select the preset station you want.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
3. Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or - on the
Remote Control repeatedly.
To turn off the radio
Press POWER to turn the DVD/CD Receiver off or
select another function mode (DVD/CD, AUX, USB).
To listen to non-preset radio stations
Use manual or automatic tuning.
For manual tuning, press TUN.(-/+) repeatedly.
For automatic tuning, press and hold TUN.(-/+) for
about two seconds on the front panel.
To tune in a station with a weak signal
To clear all the stored stations
Press and hold PROG./MEMO. for about two seconds
and “ERASE ALL” appears in the display window and
then press PROG./MEMO. again, the stations are
cleared.
If you have accidentally entered into the "ERASE
ALL" mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
"ERASE ALL" will go off by itself and change to
normal mode.
Note:
If all stations have already been entered, the FULL
message will appear in the display window for a
moment and then a preset number will flash.
To change the preset number, follow steps 5-6 as
above.
To select a preset radio station directly
You can use the number buttons on the Remote
Control to select a preset radio station directly.
For example, to listen to the preset station 4, press 4
on the Remote Control. To listen to the preset station
19, press 1 and then 9 (within 3 seconds).
For your reference
If an FM program is noisy
Press MONO/ST. on the front panel to make
“STEREO” disappear in the display window. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the
stereo effect.
Operation
Press TUN.(-/+) repeatedly in step 3 to tune in the
station manually.
To improve reception
Reorient the supplied antennas.
23
Sleep Timer Setting
XTS/XTS pro
You can set the DVD/CD Receiver to turn off
automatically at a specified time.
Each time you press XTS pro the setting changes in
the following order.
1. Press SLEEP to set the desired sleep time.
The SLEEP indicator and the sleep time appears in the
display window.
2. Each time you press SLEEP the setting
changes in the following order.
SLEEP 180 →150 →120→90 →80 → 70 → 60→ 50 →
40 → 30 → 20 →10 →OFF (No display)
Note:
You can check the remaining time before the DVD/CD
Receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
XTS ON → NORMAL → XTS-P ON...
XTS-P ON
The unique sound quality of the LG Technology
creates the optimum sound for you to play the
perfect playback of the original sound and to feel
the living sound source.
XTS ON
When playing a movie with weak bass relative to
the general music, it forces sound to the woofer.
In the mode of 2 CH BYPASS, It creates the high
display effect by playing the sound source via the
rear speakers same as the front speakers.
Note
Dimmer
This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER repeatedly.
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, the “MUTE” indicator flashes in
the display window.
Selecting input source
You can use VCRs or other units connected to the AV
IN or Optical connector. Refer to the Owner’s Manual
supplied with the unit for further information on the
operation.
Press AUX repeatedly on the Remote Control to
select the desired input source.
Each time you press this button, the mode of the
function changes in the following sequence:
AUX : for selecting the analog signal from AUX AUDIO
Input (L/R) Connector.
AUX OPT: for selecting the optical digital signal from
OPTICAL IN Connector.
AUDIO IN: for selecting the analog signal from AUDIO IN
Connector.
Notes
The Optical input function is available only when the
sampling frequency of other unit is 32 - 96kHz.
You can also select the input source by pressing
FUNC. button on the front panel.
Press and hold this button for about 3 seconds,
then press repeatedly to select other function.
The XTS mode is temporarily disabled when changing from
2.1 CH to 5.1 CH and it is enabled when changing it to 2.1
CH.
NORMAL
XTS-P and XTS mode tune off
VIRTUAL sound
Press VSM to set the VIRTUAL sound.
Source
2.1 ch.
5.1 ch
Display
VIRTUAL
VIRTUAL
3D STEREO
Realtime 3D positioned sound rendering
technology with stereo sources, optimized for
stereo speakers. Listeners may experience
amazing virtual surround effects with their own
multimedia players.
Multichannel sound
The Multichannel sound changes the sound in 5.1
ch into a virtual one in the 10.1 ch so that it
provides such a feeling that you listen to the sound
simultaneously from the right and left speakers and
center speaker.
Sound Mode
You can enjoy surround sound simply by selecting
one of the pre-programmed sound fields according to
the program you want to listen to. (2 ch. sound only)
Press SOUND button repeatedly.
The sound mode is changed in the display window in
the following order.
BYPASS → ON STAGE → STUDIO → CLUB → HALL
→ THEATER 1 → CHURCH → PL ll MOVIE
→ PL ll MUSIC → PL ll MTRX → BYPASS...
Note:
Initial sound mode is BYPASS.
24
Effect
3D STEREO
Multichannel sound
XM Satellite Radio Operation
What is XM Satellite Radio?
XM Radio is the satellite radio service with millions of
listeners across the U.S.
Broadcasting live daily. XM Radio offers 160 digital
radio channels offering music, news, sports, comedy,
talk, entertainment, traffic and weather reports, with
high quality digital sound.
XM service subscription sold separately. XM Passport
System required to receive XM service (sold
separately). Installation costs and other fees and
taxes, including a one-time activation fee may apply.
XM service only available in the 48 contiguous United
States. Residents in Canada please see information
about Canadian Satellite Radio at the following
webpage: (www.cdnsatrad.com). XM Connect-andPlay is a trademark of XM Satellite Radio Inc. ©2006
XM Satellite Radio Inc. All rights reserved.
What is XM Ready?
An audio system labeled “XM Ready” means that the
system with the addition of an XM Passport Antenna
has everyting you need to play XM. Everything else is
built inside.
XM Satellite Radio connections
Connect the XM Digital Antenna to the XM passport
system on the unit.
Activating Your Service
A one-time activation fee is required to establish an
account and activate service with XM Satellite Radio.
Applicable activation changers will be added to your
first bill.
1. Before activating XM service, make sure your XM
equipment is tuned to the XM Preview Channel
(Channel 1).
2. Determine your eight-character XM Satellite Radio
ID number by referencing the label on your XM
Passport System packaging, rear cover, or by
selecting channel 0. The ID number will appear on
the display.
Note:
Carefully check your XM Satellite Radio ID. The letter
I, O, S, and F are not used
3. Activate your XM Satellite Radio service. Make
sure you have a major credit card and your XM
Satellite Radio ID number handy.
To activate via the internet: Visit
http://www.xmradio.com/activation
To activate via phone: Call 1-800-XM-RADIO (967-2346)
A one-time activation fee will apply.
Selecting the XM Satellite Radio
Press TUNER on the Remote Control until
“ANTENNA” appears in the display window.
XM information
INPUT
L - AUX - R
HDMI OUT
Y
PB
PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
When receiving the XM Satellite Radio containing, you
can see the information in the display window.
XM IN
i Pod
XM
XM passport system
Press XM MODE to change XM display mode.
Channel Number → Channel Label →
Song Name/Artist Name → Signal Strength →
Channel Number → ...
Operation
MONITOR
• Channel Number :
Display current XM Channel Number
Channel Number shows 3 seconds regardless its
display mode when channel is changed.
When user edits or change preset, it works on
channel number display mode.
• Channel Label
Display name of current channel.
• Song Name & Artist Name
Display song name & artist name as scroll.
• Signal Strength
Signal Strength is showed by 3 bars with antenna
shape.
No Bar: No Signal.
One Bar: Weak Signal
Two Bar: Marginal Signal
Three Bar: Good Signal
25
Presetting the XM Satellite Radio Stations
You can preset 50 stations for XM. Before tuning,
make sure that you have turned down the volume.
1. Press TUNER to select XM band.
2. Use XM CH (-/+) on the Remote Control to select
the desired channel.
Category search mode is released below case.
• CAT is inputted in Category search mode.
• No input of PRESET (-/+), XM CH - or XM CH + key
for 15 seconds.
Advisory Message
ANTENNA
XM Passport System is not
connected
• Check the connection of XM
Passport System
SVC ANT
XM Passport System does not
work properly
• Need service of XM Passport
System
UPDATING
XM Passport System is not
activated, or User does not have
authorization for specific channel
• Subscribe activation of XM
Passport System
NO SIGNAL
Receiving signal is too weak
• XM Passport System to south
window for best reception
OFF AIR
Selected channel is not
broadcasting currently.
• Check programming list, select
another channel.
LOADING
XM Passport System is now
decoding channel.
• Wait completion of decoding
process
XM---
Selected channel is not available.
• Check programming list, select
another channel.
-----------/-----------
Channel label or Song name/Artist
name or Category name is not
available
3. Press PROG/MEMO. on the Remote Control.
4. Press PRESET (-/+) on the Remote Control to
select the preset number you want.
5. Press PROG/MEMO. on the Remote Control
again.
The station is stored.
6. Repeat steps 2 to 5 to store other stations.
To clear all the stored stations
Press and hold PROG/MEMO. for about two seconds
and “ERASE XM” is shown in the display window and
then press PROG/MEMO. again, the stations are
cleared.
If you have accidentally entered into the "ERASE
XM" mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
the "ERASE XM" display will go off by itself and
change to normal mode.
Channel Selection
Preset Search
Use PRESET (-/+) on the Remote Control repeatedly
to select the preset station you want.
Direct Tuning
1. Using Numeric button on Remote Control, select
channel number directly.
2. Press ENTER after more than one numeric key
input, system moves to new channel immediately.
Channel up/down
Use XM CH (-/+) repeatedly to select the channel you
want.
Category Search
1. Select the Category Search mode using the CAT
key on the Remote Control.
(CAT Icon Blinking in Category Search mode.)
2. PRESET (-/+) changes target of category for
search, XM CH - or XM CH + selects next channel
of selected category in category search mode.
Note:
Category type of current channel displays for 3
seconds when category key is inputted in not category
display mode
26
Controlling your TV with the
Suppllied Remote Control
TUNER
You can control the sound level, input source, and
power switch of your LG TV with the supplied Remote
Control.
OPEN/CLOSE
POWER
AUX
DVD
USB
iPod
DIMMER
SOUND
S-TITLE
CLEAR
REPEAT A-B
MARKER
SEARCH
AUDIO
You can control your TV using the buttons below.
REPEAT
By pressing
You can
TV POWER
Turn the TV on or off.
CHANNEL(v / V)
Scans up or down through
memorized channels.
VOLUME +/–
Adjust the volume of the TV.
TV INPUT
Switch the TV’s input source
between the TV and other input
sources.
SCAN
+
SKIP
STOP
TITLE
ZOOM
PLAY
SETUP
MENU
XM CH
Note:
Depending on the unit being connected, you may not
be able to control your TV using some of the buttons.
SCAN +
PAUSE/STEP
DISPLAY
RETURN
XM CH
ENTER
SLEEP
Controlling other TVs with the
Supplied Remote Control
VOL
MUTE
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is
listed in the table below, set the appropriate
manufacturer code. (refer to page 28)
CAT/HDMI
XM MODE/RESOL.
Operation
1. While holding down TV POWER button, press the
number buttons to select the manufacturer code
for your TV (Refer to table on the right column).
PROG./MEMO.
2. Release TV POWER button.
POWER
TV Control
Buttons
CHANNEL
VOL
INPUT
27
Controlling other TVs with the Supplied Remote Control (Continued)
If more than one code number is listed, try entering them one at a time until you find the one that works with
your TV.
Manufacturer
ADMIRAL
AIWA
AKAI
AMARK
AOC
BELL & HOWELL
BROKSONIC
CANDLE
CCE
CENTURION
CINERAL
CITIZEN
CORONADO
CROWN
CURTIS MATHES
DAEWOO
DAYTRON
EMERSON
FISHER
FUNAI
GENERAL ELECTRIC
GRADIENTE
HITACHI
JC PENNEY
JVC
KIOTE
KMC
KTV
LG (GOLDSTAR)
LODGENET
LOGIK
LXI
MAGNAVOX
MAJESTIC
MARANTZ
MEMOREX
MGA/MITSUBISHI
Code Number
16,33,37,44,45
70
01
09
01
33
18,19
51
07
08
43
49,50,51,52,53,54,55
09
09
01,03,08,33,35,37,44
16,38,39,40,41,42,43
01,08
01,09,16,17,18,19
28,29
46,47
03,10,11,13,37,44
01,56,57,63,67
09,14,15,43
01,08,10,27,35
20,21,63,67
43
09
01,08,09,31
01,07,08,09,35,39,40
33
33
09,24,25,26,27,28,29
01,02,04,05,06,
07,08,09,20,
34,35,43,51,61,62,65
33
01,32
33
01,08,32,34
Manufacturer
MONTGOMERY
WARD
NEC
NOBLEX
PACKARD BELL
PANASONIC
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUASAR
RADIO SHACK
RCA
REALISTIC
SAMPO
SAMSUNG
SANYO
SCOTT
SEARS
SEMP
SHARP
SIGNATURE 2000
SONY
SOUNDESIGN
SYLVANIA
SYMPHONIC
TATUNG
TEKNIKA
TELERENT
THOMSON
YORX
TOSHIBA
WARDS
XR1000
ZENITH
Code Number
01,06,08,09
23,24,32,33,34
01,08
07
43
07,11,13,25,35,36
01,06,07,08,09,
15,38,43,58
06,07,43,61,62,65
30
09
03,37,44
11,13
16,17,23
01,03,37,44,69
16,17,23
08
01,08,09,25,68
28,29
01,08
09,25,26,27,28,29
64
09,22,23,24,60,66
01,06,08,09,10,
23,24,33,34
12,62
51
01,04,05,06,07,
08,35,51
46,47
11
07,09,16,33,51
09,33
69
08
01,25,26,27,64
01,06,08,09,10,33,34
48
01, 02,33,59
Notes:
• Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code.
• If you enter a new code number, the code number previously entered will be erased.
• When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the
appropriate code number again.
28
Reference
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Area
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Code
MY
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
PY
PH
PL
PT
RO
RU
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose a area code from this list.
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
Area
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Code
ET
FJ
FI
FR
DE
GB
GR
GL
Heard and McDonald Islands HM
Hong Kong
HK
Hungary
HU
India
IN
Indonesia
ID
Israel
IL
Italy
IT
Jamaica
JM
Japan
JP
Kenya
KE
Kuwait
KW
Libya
LY
Luxembourg
LU
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
SA
SN
SG
SK
SI
ZA
KR
ES
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Reference
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
29
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Symptom
Cause
No power.
• The power cord is disconnected.
The power is on, but
the DVD/CD Receiver
does not work.
• No disc is inserted.
• Insert a disc. (Check that the DVD or,
audio CD indicator in the DVD display
is lit.)
No picture.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input
mode on the TV so the picture from
the DVD/CD Receiver appears on the
TV screen.
• Connect the video cable into the
jacks securely.
• The video cable is not connected
securely.
• The connected TV power is turned off.
There is no sound or
only a very low-level
sound is heard.
The playback picture is
poor.
Loud hum or noise is
heard.
• Turn on the TV.
• The equipment connected with the
audio cable is not set to receive DVD
signal output.
• Select the correct input mode of the
audio receiver so you can hear the
sound from the DVD/CD Receiver.
• The audio cables are not connected
securely.
• Connect the audio cable into the
jacks securely.
• The power of the equipment connected
with the audio cable is turned off.
• Turn on the equipment connected
with the audio cable.
• The audio connecting cable is damaged.
• Replace it with new one.
• The disc is dirty.
• Clean the disc.
The DVD/CD Receiver • No disc is inserted.
does not start playback.
30
Correction
• Plug the power cord securely into the
wall outlet.
• Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display
is lit.)
• An unplayable disc is inserted.
• Insert a playable disc. (Check the
disc type, colour system and Regional
code.)
• The disc is placed upside down.
• Place the disc with the playback side
down.
• The disc is not placed within the guide.
• Place the disc on the disc tray
correctly inside the guide.
• The disc is dirty.
• Clean the disc.
• A menu is on the TV screen.
• Press the SETUP button to turn off
the menu screen.
• The Rating level is set.
• Cancel the Rating function or change
the rating level.
• The disc is dirty.
• Clean the disc.
• The speakers and components are
connected poorly.
• Connect the speakers and
components securely.
• The DVD/CD Receiver is located too
close to the TV.
• Move your TV away from the audio
components.
The Remote Control
does not work
properly.
The front panel
display is too dim.
Correction
• Connect the antenna securely.
• Adjust the antennas and connect an
external antenna if necessary.
• The signal strength of the stations is too
weak (when tuning in with automatic
tuning).
• Tune in the station manually.
• No stations have been preset or preset
stations have been cleared (when
tuning by scanning preset stations).
• Preset the stations (page 23).
• The Remote Control is not pointed at the
remote sensor of the DVD/CD Receiver.
• Point the Remote Control at the Remote
Sensor of the DVD/CD Receiver.
• The Remote Control is too far from the
DVD/CD Receiver.
• Use the Remote Control within about 23
ft (7 m).
• There is an obstacle in the path of the
Remote Control and the DVD/CD
Receiver.
• Remove the obstacle.
• The batteries in the Remote Control are
flat.
• Replace the batteries with new ones.
• Nothing is displayed on the front panel
display.
• Press DIMMER on the Remote Control.
Reference
Cause
Symptom
Radio stations cannot • The antenna is positioned or connected
poorly.
be tuned in.
31
Specifications
Speakers
Amplifier
AM
[MW]
Tuner
FM
Video
CD/DVD
General
Power supply
Power consumption
Net Weight
External dimensions (W x H x D)
Operating conditions
Operating humidity
Laser
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Video input
Video output
COMPONENT VIDEO OUT
32
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Stereo mode
Surround mode
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Inputs
Outputs
Type
Impedance
Frequency Response
Sound Pressure Level
Rated Input Power
Max. Input Power
Net Dimensions (W x H x D)
Net Weight
Refer to main label.
Refer to main label.
3.9 kg
430 x 70 x 310 mm
Temperature: 5°C to 35°C, Operation status: Horizontal
5% to 85%
Semiconductor laser, wavelength 650 nm
NTSC 525/60
200 Hz to 18 kHz
More than 75 dB (1 kHz, NOP -6 dB, 20 kHz LPF/A-Filter)
More than 70 dB
0.5 % (1 kHz, at 1W position) (20 kHz LPF)
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(PB)/(PR) 0.7 V (p-p), 75 ohms, RCA jack x 1
87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz
10.7 MHz
60 dB (Mono)
140 - 10,000 Hz
522 - 1,620 kHz or 520 - 1,720 kHz
450 kHz
155 W + 155 W (4Ω at 1 kHz, THD 10 %)
Front: 155 W + 155 W (THD 10 %)
Center*: 155 W
Surround*: 155 W + 155 W (4Ω at 1 kHz, THD 10 %)
Subwoofer*: 225 W (3Ω at 30 Hz, THD 10 %)
AUDIO IN, OPTICAL IN
MONITOR OUT, HDMI OUT,
COMPONENT VIDEO OUT
Front/Rear Speaker
Center speaker
Passive Subwoofer
(SH92SB-S)
(SH92SB-C)
(SH92SB-W)
1 Way 1 Speaker
2 Way 3 Speaker 1 Way 1 Speaker
4Ω
4Ω
3Ω
120 - 18000 Hz
120 -18000 Hz
40 - 1500 Hz
83 dB/W (1m)
83 dB/W (1m)
82 dB/W (1m)
155 W
155 W
225 W
310 W
310 W
450 W
113 x 209 x 83 mm
301 x 118 x 83 mm 258 x 440 x 401 mm
0.83 kg
1.8 kg
6.8 kg
LG Electronics, Inc.
Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or
workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date
(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original
purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 days from the Date of Purchase.
Call 1-800-243-0000 for instructions on getting the
defective unit repaired or replaced.
PARTS: One Year from the Date of Purchase.
Please retain dated sales receipt and your box to
return the unit to LG for repair or replacement.
* Parts replaced are warranted for the remaining portion
of the original warranty period.
Shipping both ways will be paid by LG during the first 90
days of the Warranty Period. During the remainder of the
Warranty Period (91-365 days), you pay inbound shipping
charges and LG pays return shipping charges.
Visit our website at: http://www.lgservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED
WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG
ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE
DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT
LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER
DAMAGE WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of
incidental or consequential damages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may
not apply to you. This warranty gives you specific legal rights and you may also have other rights that may vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
z
Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,
maintenance or failure to maintain, or separate system components; and
z
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or
voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer
software, institutional or commercial use, or other causes not arising out of defect in material or workmanship.
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service Center, Where to buy,
Product Assistance, or Customer Assistance
Call 1-800-243-0000 (24 hours a day, 365 days per year)
and select appropriate options from the menu.
Or visit our website at http://www.lgservice.com
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
ENGLEWOOD CLIFFS, NJ.
P/NO : MFL34656568
Issue O
Printed in Indonesia