Canon 6181B001 Digital Camera User Manual

COMPACT DISC PLAYER
with STEREO CLOCK RADIO
OWNER’S MANUAL
CKD9907
Visit our web site at www.emersonradio.com
CKD9907_ib.p65
16
2001/4/17, PM 12:19
Thank You..........
for purchasing this CD Cruiser Stereo Clock Radio with Compact Disc Player from
Emerson. This compact unit will wake you up to an electronic buzzer alarm, the
AM/FM radio, or your favorite artists on compact disc. It also features a sleep to
music timer that lulls you to sleep to the radio or CD player and then switches the
power off automatically. The battery back up system maintains the correct time
and alarm settings in the event of a power interruption. Two dynamic speakers
provide excellent sound for such a compact size unit, and all of the important controls
are top mounted for the most user friendly operation.
The serial number of your unit can be found on the bottom of the cabinet. We
suggest that you record the serial number in the space provided below in case
this information is ever needed at a future date.
Model Number: CKD9907
Serial Number: ________________________________
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
This product contains a low power Laser Device.
DANGEROUS VOLTAGE
Uninsulated Dangerous Voltage, that may be of sufficient
magnitude to constitute a risk of electric shock to persons is present
within this product's enclosure.
ATTENTION
The Owner's Manual contains important operating and maintenance
instructions.
For your safety, it is necessary to refer to the manual.
1
CKD9907_ib.p65
1
2001/4/17, PM 12:19
IMPORTANT NOTES
Avoid installing the unit in locations described below :
• Places exposed to direct sunlight or
close to heat radiating appliances
such as electric heaters, on top of
other stereo equipment that radiates
too much heat, places lacking
ventilation or dusty areas, places
subject to constant vibration and/or
humid or moist areas.
• Do not attempt to clean this unit with
chemical solvents as this might
damage the finish. Use a clean dry
cloth.
• Operate controls and switches as
described in the manual.
• Store your CDs in a cool area to
avoid damage from heat.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
2
CKD9907_ib.p65
2
2001/4/17, PM 12:19
PREPARATION FOR USE
UNPACKING AND SET UP
•
Remove the unit from the carton and remove all packing material from the unit.
•
Remove any descriptive labels or stickers from the top or front of the cabinet.
Do not remove any labels or stickers from the back or bottom of the cabinet.
•
Press the CD Open button to open the CD door. Remove the white transit card
from the CD compartment, if applicable. This card is used to prevent the laser
pick up from moving during shipment. It must be removed from the CD
compartment before you insert a disc.
•
Remove the twist tie from the AC power cord and extend the cord to its full
length.
•
Unwind the lead wire FM antenna and extend it to its full length.
•
Place the radio on a level surface such as a stand, desk, table or shelf, convenient
to an AC outlet, and away from direct sunlight or sources of excess heat, humidity,
moisture, dust or vibration.
BATTERY BACK UP SYSTEM
This clock radio has a battery back up system that will maintain the time and alarm
settings in the event of a temporary power interruption. The system requires one
9-volt battery, not included.
Open the battery door on the bottom of the cabinet and connect a 9-volt battery to
the battery terminals inside the compartment. It can only be connected one way.
Push the battery into the battery compartment and replace the battery door.
If the power is interrupted the clock display goes off and the unit will not operate.
However the battery will maintain the time and alarm settings, and when the power
is restored the time and alarm settings will be correct.
3
CKD9907_ib.p65
3
2001/4/17, PM 12:19
POWER FAILURE INDICATION
If the battery is exhausted, or there is no battery installed and the power is interrupted,
the time and alarm settings will be lost. When power is restored the clock display
will return to its default setting “12:00” and begin counting forward from that point. If
you notice that the time on the display is incorrect, check your alarm settings as
well. If they are also incorrect this indicates that the power was interrupted and the
battery is exhausted. Replace the battery with a new one and reset both the time
and alarm settings.
POWER SOURCE
This radio is designed to operate on 120V 60Hz AC house current only. Attempting
to operate this radio from any other power source may cause damage to the unit,
and such damage is not covered by your warranty.
Be sure that the AC outlet you use is always ‘live’. Do not connect this unit to an
outlet that is controlled by a wall switch.
This unit has a polarized AC plug with one wide
blade and one narrow blade. This plug will only
fit into a matching polarized AC outlet. This is a
safety feature to reduce the possibility of electric
shock. If this plug will not fit in your AC outlet,
you probably have an outdated non-polarized
outlet. You should have your outdated outlet
changed by a qualified, licensed electrician. Do
not file the wide blade on the plug, or use an
adapter to make the plug fit into your outlet. This
defeats the safety feature and could expose you
to electric shock.
4
CKD9907_ib.p65
4
2001/4/17, PM 12:19
LOCATION OF CONTROLS
'
!
&
$
"
%
#
#
%
'
!
"
$
&
%
$
#
&
"
"
!
!
!
1. POWER On/Off Button.
2. Power ‘On’ Indicator.
3. SLEEP Button.
4. VOLUME Control.
5. DISPLAY Mode Button.
6. RANDOM Button.
7. ALARM (SET/ON/OFF) Switch.
8. CLOCK Adjust Button.
9. CD Door.
10. AC Power Cord.
11. FM Wire Antenna.
12. Battery Compartment (at bottom cabinet).
13. FUNCTION (CD/AM/FM/BUZZER) Switch.
14. CD PROG (Program) Button.
15. CD REPEAT Button.
16. CD SKIP + / HOUR Button.
!
'
17. TUNING Control.
18. CD SKIP – / MINUTE Button.
19. CD PLAY/PAUSE
Button.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
Button.
CD Door OPEN
SNOOZE Button.
CD STOP
Button.
Tuning Dial.
Speakers.
ALARM ‘On’ Indicator.
AM Indicator.
LED Display.
FM STEREO Indicator.
CD RANDOM ‘On’ Indicator.
SLEEP ‘On’ Indicator.
CD REPEAT ‘On’ Indicator.
CD PROG (Program) ‘On’ Indicator.
5
CKD9907_ib.p65
5
2001/4/17, PM 12:19
OPERATING INSTRUCTIONS
SETTING THE CLOCK
When the unit is first connected to the AC outlet the display will show “12:00” and
will begin counting forward from that point. If no back up battery is installed the
display will revert to this “12:00” default setting every time the AC plug is removed
from the outlet, or whenever the power is interrupted.
To set the display to the correct time:
1. Depress and hold the CLOCK button. The time display begins to flash.
2. While holding the CLOCK button, depress the SKIP + / HOUR button to adjust
the display to the correct hour. Release the button when the correct hour appears.
NOTE: Be sure to set the clock to the correct AM or PM hour by observing the
AM indicator in the upper left corner of the display. If the AM indicator is ‘On’
the time displayed is AM. If the AM indicator is ‘Off’, the time displayed is PM.
3. Depress the CLOCK and SKIP – / MINUTE buttons to adjust the display to the
correct minute, and then release the buttons. The display stops flashing and the
clock begins to run.
Setting The Wake Up Time
The ALARM switch (SET-ON-OFF) is located on the left side of the cabinet.
1. Slide the ALARM switch to the SET position. The clock display changes from
the correct time to the wake up time and begins to flash.
2. Depress the SKIP + / HOUR button to adjust the display to the desired wake up
hour, AM or PM, then release the button.
3. Depress the SKIP – / MINUTE button to adjust the display to the desired wake
up minute, and then release the button.
4. Confirm that the wake up time flashing in the display is correct and then slide
the ALARM switch to either the ON or OFF position.
6
CKD9907_ib.p65
6
2001/4/17, PM 12:19
LISTENING TO THE RADIO
The FUNCTION selector (CD-AM-FM-BUZZER) is located on the right side of
the cabinet.
1. Slide the FUNCTION selector to either the AM or FM position.
2. Press the POWER button to turn the radio ‘On’.
3. Rotate the TUNING control to find the desired station.
NOTE: If you tune to an FM station that is broadcasting in stereo, the FM
STEREO indicator will come ‘On’.
4. Adjust the VOLUME control as desired.
5. When you are finished listening, press the POWER button to turn the radio
‘Off’.
Antenna Information
AM
The AM antenna is located inside the cabinet.
If AM reception is weak try changing the position
of the cabinet until you find the position that
provides the best reception.
FM
Make sure that the FM lead wire is fully
extended. If FM reception is weak try changing
the position and direction of the antenna until
you find the position that provides the best
reception.
7
CKD9907_ib.p65
7
2001/4/17, PM 12:19
CD OPERATION
NORMAL PLAYBACK
1. Slide the FUNCTION selector to the CD position.
2. Press the POWER button to turn the unit ‘On’.
3. Press the CD door OPEN
button. Place
your disc on the center spindle with the
printed label side facing up and gently press
down on the disc near the center hole to make
sure that it is firmly locked in place on the
spindle.
4. Close the CD door, pressing down on the right
side marked “CLOSE” to make sure that the
door locks properly. The disc will spin as the
player reads the Table of Contents on the
disc. The disc stops and the display shows
the total number of tracks for about 5 seconds
and then returns to the correct time display.
button to begin playback. The display shows “01”
5. Press the PLAY/PAUSE
and playback begins on track 1. After 5 seconds the display returns to the
correct time. Playback continues until all tracks have been played. To see the
track number during playback presses the DISPLAY button. The track number
appears for 5 seconds and then the correct time reappears.
6. When all tracks have been played the player stops. To stop playback before
the disc ends press the STOP button at any time.
7. Press the CD door OPEN
button to open the door. Remove your disc and
close the door. Return your disc to its protective storage case.
8. Press the POWER button to turn the power ‘Off’.
PAUSE OPERATION
To pause momentarily press the PLAY/PAUSE
button during playback. The
sound stops but the disc continues to spin. The track number flashes for 5 seconds
and then the correct time reappears. Press PLAY/PAUSE
button again to
cancel pause and resume normal playback.
8
CKD9907_ib.p65
8
2001/4/17, PM 12:19
SKIP TRACK AND MUSIC SEARCH FUNCTIONS
•
To begin playback from a specific track
After inserting your disc press the SKIP + / HOUR or SKIP – / MINUTE button
until the desired track number appears on the display, then press the PLAY/
PAUSE
button to begin playback on that track.
•
To skip tracks during playback
Press the SKIP + / HOUR or SKIP – / MINUTE button repeatedly during playback
until the desired track number appears on the display, then release the button.
The player moves ahead or back to the beginning of the desired track.
•
To search for a specific part of a track
During playback depress and hold the SKIP + / HOUR or SKIP – / MINUTE
button. The player searches rapidly forward or backward through the track and
the track number appears on the display. When you reach the desired point on
the track release the buttons. Normal playback resumes at that point and the
display returns to the correct time.
REPEAT PLAYBACK
•
To repeat a single track
Select the track to be repeated with the SKIP + or SKIP – buttons, then press the
REPEAT button once. The “REPEAT” indicator flashes. Press PLAY/PAUSE
to begin playback. The selected track will be repeated continuously.
•
To repeat the entire disc
Press the REPEAT button twice. The “REPEAT” indicator remains ‘On’. Press
PLAY/PAUSE
button to begin playback. The entire disc will be repeated
continuously.
NOTE: The repeat function can be activated while the disc is playing or while
the disc is stopped.
•
To cancel repeat playback
Press the STOP
button or press the REPEAT button until the “REPEAT”
indicator goes ‘Off’.
9
CKD9907_ib.p65
9
2001/4/17, PM 12:19
RANDOM PLAYBACK
•
To play the tracks in random order
After inserting your disc press the RANDOM button. The Random indicator
appears in the display. Press PLAY/PAUSE
to begin random playback. The
player selects a track at random. The track number appears in the display and
playback begins on that track. After all tracks have played in random order the
player stops.
•
To cancel random playback
Press the STOP button. You may also press the RANDOM button again. The
Random indicator goes ‘Off’ and normal playback will continue with the next
track on the disc.
PROGRAMMED PLAYBACK
This feature allows you to select just the tracks you want to hear in the order that
you want to hear them.
You can program up to 20 tracks to play in any order. You may also program
certain tracks to play more than once if desired.
NOTE: You cannot program the player while the disc is playing. If the disc is playing
press the STOP button first and then follow the steps below.
1. Press the PROG (Program) button. The
“PROG” indicator flashes and “P 01” appears
on the display.
2. Press SKIP + or SKIP – to select the first track
(Example: Track 8) to be programmed , then
press the PROG (Program) button again to
enter the selected track into program memory
# 1. The display advances to “P 02”.
3. Select the next track to be programmed and
when the desired track number appears in the
display press the PROG (Program) button to
enter the track in the program memory.
4. Repeat step 3 to enter up to a total of 20 tracks in the memory.
10
CKD9907_ib.p65
10
2001/4/17, PM 12:19
5. Press PLAY/PAUSE
button to begin programmed playback. The tracks you
selected will play in the programmed order. When all tracks have been played
the player stops.
NOTES:
A. You must select a track and enter it in the memory while the “PROG” indicator is
flashing (approximately 10 seconds). If the “PROG” indicator stops flashing the
track will not be entered in the memory.
B. If you press the SKIP + or SKIP – buttons during programmed playback the
player will skip forward or back to the next track in your program, not the next
track on the disc.
ALARM OPERATION
You can chose to wake up to the electronic BUZZER, to AM/FM radio, or to the CD
player.
First check the wake up time setting by sliding the ALARM switch to the SET position.
Adjust the wake up time setting if necessary. See “Setting The Wake Up Time”
on page 6. Then set the ALARM switch to the ON position. The ALARM ‘On’
indicator appears in the display.
•
To wake to buzzer
Set the FUNCTION selector to the BUZZER position.
•
To wake to radio
Set the FUNCTION selector to the AM or FM position. Make sure that the radio
station is correctly tuned and the volume is set to the desired level.
•
To wake to CD
Set the FUNCTION selector to the CD position. Confirm that a disc is in the
player and the volume is set to the desired level.
At the selected wake up time the power will turn ‘On’ and operate the buzzer,
radio or CD according to your selection. The alarm will continue for 60 minutes
and then shut itself off automatically and reset itself for the following day.
•
To stop the alarm immediately
Press the POWER button to turn the power ‘Off’. The alarm stops and resets
itself to repeat again the following day at the same time. To cancel the alarm
completely slide the ALARM switch to the OFF position. The alarm will not come
on again.
11
CKD9907_ib.p65
11
2001/4/17, PM 12:19
SNOOZE / REPEAT ALARM
If you need a few extra minutes sleep when the alarm turns ‘On’ in the morning,
press the SNOOZE button. The alarm stops for 6 minutes and then starts again.
This operation may be repeated several times if desired.
SLEEP TIMER
You can program the Sleep Timer to shut off the radio or CD player after 90
minutes, 60 minutes, or 30 minutes, so you can fall asleep to the radio or CD
player and the unit will shut ‘Off’ automatically.
•
If the radio or CD player is playing press the POWER button to shut the power
‘Off’.
•
Sleep to radio
Set the FUNCTION selector to the AM or FM position.
•
Sleep to CD
Set the FUNCTION selector to the CD position. Make sure that there is a disc
in the player.
To start the sleep timer and set the sleep time, press the SLEEP button. The display
shows two dashes “– –” and the SLEEP indicator begins to flash. Continue to press
the SLEEP button to set the time as follows:
Press SLEEP once more for 90 minutes, twice for 60 minutes, and three times for
30 minutes. The selected time appears in the display for 5 seconds and then the
unit turns ‘On’ to the function you selected, either radio or CD. The display changes
back to the correct time but the SLEEP indicator remains ‘On’. Adjust the VOLUME
control to the desired level. The unit will continue to play for the amount of time you
selected and then shut itself automatically. To shut the unit off before the sleep
timer counts down to “00”, press the POWER button at any time. The unit turns
‘Off’ and the SLEEP indicator disappears.
NOTES:
A. Remember that the volume that you select for sleep timer operation is the
same volume you will hear when the radio or CD alarm comes on in the morning.
B. If you are using the sleep to CD function remember that the CD player will
stop when the disc ends. If you set the sleep timer for 90 minutes in the CD
function but your CD is only 48 minutes long, the player will stop after 48
minutes.
12
CKD9907_ib.p65
12
2001/4/17, PM 12:19
CARE AND MAINTENANCE
COMPACT DISC CARE
•
To remove a disc from its storage case, press down on the center of the case and
lift the disc out, holding it carefully by the edges.
•
Fingerprints and dust should be carefully wiped off the disc’s recorded surface
with a soft cloth.Unlike conventional records, compact discs have no grooves to
collect dust and microscopic debris, so gently wiping with a soft cloth should
remove most particles. Wipe in a straight line from the inside to the outside of
the disc. Small dust particles and light stains will have absolutely no effect on
reproduction quality.
•
Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents
or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.
•
Never write on or affix labels to the surface of compact discs.
CARE OF THE CABINETS
•
If the cabinets become dusty wipe them with a soft dry dust cloth. Do not use
any wax or polish sprays on the cabinets.
•
If the front panel becomes dirty or smudged with fingerprints it may be cleaned
with a soft cloth slightly dampened with a mild soap and water solution. Never
use abrasive cloths or polishes as these will mar the finish of your unit.
CAUTION:
Never allow any water or other liquids to get inside the unit while cleaning.
13
CKD9907_ib.p65
13
2001/4/17, PM 12:19
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before calling
for service.
SYMPTOM
Unit will not turn on.
No Sound.
CAUSE
AC cord not connected.
FUNCTION switch set
to BUZZER position.
Disc will not play.
CD compartment not
closed.
Disc inserted incorrectly.
Dirty or defective disc.
CD no sound.
VOLUME control set to
minimum.
Defective disc.
Erratic playback.
Dirty or defective disc.
Display has reverted Battery connected
to “12:00” after
improperly, or dead.
power failure.
Clock not set.
Alarm does not turn ALARM switch not set to
‘On’
‘ON’ position.
Clock is not set.
Alarm time not set.
AM or FM no sound. Power is not ‘On’.
VOLUME control set to
minimum.
SOLUTION
Check AC cord connection.
Set FUNCTION switch to
CD, AM or FM position.
Close CD compartment
door.
Reinsert disc correctly.
Try another disc.
Increase volume.
Try another disc.
Clean or replace disc.
Check the battery.
Set the clock.
Set the ALARM switch to
‘ON’ position.
Set the clock.
Set alarm time.
Press the POWER button
to turn the unit’On’.
Increase volume.
SERVICE
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE
PLEASE CALL:
1-972-884-2350
FOR CUSTOMER SERVICE, PLEASE WRITE TO:
Emerson Radio Corp.
Consumer Affairs Dept.
1901 Diplomat Drive,
Farmers Branch, TX 75234.
14
CKD9907_ib.p65
14
2001/4/17, PM 12:19
EMERSON RADIO CORP.
LIMITED WARRANTY
What does this warranty cover ? Any manufacturing defects in original material, including
original parts and workmanship, under normal use and conditions.
For how long? For a period of ninety (90) days from the date of original purchase in the U.S.
What will we do ? If you need service under this Warranty, and you provide us with the dated proof
of purchase, we will provide repair service at no charge for labor and parts at an authorized Depot Repair
Facility, or replace the product in our discretion.
How do you make your warranty claim ? If it becomes necessary to repair your unit, you can
obtain the name and mailing location of a Depot Repair Facility by dialing 1-800-695-0098. You should
pack your unit in a well-padded heavy corrugated box, enclose your check or money order payable to the
Depot Repair Facility in the amount of $9.00 to cover the return shipping and handling costs, and enclose
a copy of your proof of purchase (warranty service will not be provided without a dated proof of purchase).
Finally, you should ship the unit prepaid via UPS or parcel post (insured).
What does your warranty not cover ? Your warranty does not cover the following :
· Damage from negligence, misuse, abuse, accident, or failure to follow operating instructions.
· Use of product in a commercial application or rentals.
· Changes or repairs by anyone other than an authorized Depot Repair Facility.
· Damage because your unit is improperly connected to the equipment of other manufacturers.
· Unit on which the serial number has been defaced, modified or removed.
· Damage to equipment not properly connected to the product.
· Cost incurred in shipping your unit to and from an authorized Depot Repair Facility.
· Ordinary adjustments which you can perform as outlined in the owner’s manual.
· Signal reception problems caused by external antenna or cable systems.
· Products purchased, used, serviced, or damaged outside of the United States.
· Damage to compact discs or cassettes.
What other limitations apply to your warranty ?
THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL
PURCHASER AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT.
THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA. ANY
A P P L I C A B L E I M P L I E D WA R R A N T I E S , I N C L U D I N G T H E WA R R A N T Y O F
MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD OF THE EXPRESSED
WARRANTY AS PROVIDED ABOVE BEGINNING WITH THE DATE OF ORIGINAL
PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESSED OR IMPLIED,
SHALL APPLY TO THE PRODUCT THEREAFTER. WE MAKE NO WARRANTY AS TO THE
FITNESS OF THE PRODUCT FOR ANY PARTICULAR PURPOSE OR USE.
THE EXTENT OF OUR LIABILITY UNDER THIS LIMITED WARRANTY IS THE REPAIR
OR REPLACEMENT PROVIDED ABOVE AND IN NO EVENT WILL OUR LIABILITY
EXCEED THE PURCHASE PRICE PAID BY THE PURCHASER OF THE PRODUCT. UNDER
NO CIRCUMSTANCES WILL WE BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN
CONNECTION WITH THE USE OF THIS PRODUCT.
How does state law apply to your warranty ?
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, BUT YOU MAY ALSO HAVE
OTHER RIGHTS WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW
LIMITATIONS ON IMPLIED WARRANTIES OR EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGE, SO THESE RESTRICTIONS MAY NOT
APPLY TO YOU.
AU898F
15
CKD9907_ib.p65
15
2001/4/17, PM 12:19
EMERSON RADIO CORP.
EMERSON
PART NO. : 16-2818
104-01
CKD9907_ib.p65
PRINTED IN CHINA
17
2001/4/17, PM 12:19