Canon 6371B049AA All in One Printer User Manual

Basic Operation Guide
/
For information about machine setup and software
installation, see the Starter Guide.
This guide describes the basic use of
the machine. Read this guide after
finishing the machine setup.
Read Important Safety Instructions
ILUVWĺS
Keep this manual for future reference.
For information about advanced operations and
specifications, see the e-Manual included on the User
Software CD-ROM.
Manuals for the Machine
Starter Guide
The Starter Guide describes setting up the machine and installing the software.
Be sure to read this manual before using the machine.
Basic Operation Guide
This Manual
The Basic Operation Guide describes common use and basic functions of the copy
and print functions.
e-Manual
The e-Manual includes information about all functions and configurations of the machine.
This manual is included on the User Software CD-ROM. Use the e-Manual’s search function
to easily find the information you want.
For Macintosh Users
The examples shown in this manual are based on the operation in the Windows
environment. To view how to use printer driver and scanner driver, refer to the
driver guides included in the User Software CD-ROM and the driver’s help.
Displaying Driver Guides
To view the Driver Guides, double-click the HTML files from the following folders
on the User Software CD-ROM.
• Canon MF Printer Driver Installation Guide  [Documents] [Print] 
[Guide]  [index.html]
• Canon Scanner Driver Guide  [Documents]  [Scan]  [Guide] 
[index.html]
Displaying from Driver’s Help System
From each driver panel, click [
2
]
How to Use This Manual
Symbols Used in This Manual
Indicates a situation that may lead to death or injury to persons.
WARNING To use the machine safely, always pay attention to these warnings.
CAUTION
Indicates a situation that may lead to injury to persons or damage to
equipment. To use the machine safely, always pay attention to these
cautions.
Indicates an operation that must not be performed. Read these items
carefully, and make sure not to perform the described operations.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read
these items carefully to operate the machine correctly and avoid
damage to the machine or property.
Indicates a clarification of an operation or additional explanations for a
procedure. Reading these notes is highly recommended.
Keys and Buttons Used in This Manual
In this manual, the following styles are used to represent keys, messages on the display, and
buttons or other items on a computer screen.
• Operation panel keys: [Key icon] (Key name)
Example: [
] (Stop)
• Display: <Message>
Example: <Specify Destination>
• Buttons and items on a computer screen: [Item]
Example: [Preference]
Illustrations Used in This Manual
Illustrations Used in This Manual
Illustrations of the D560 are used in this manual. If a procedure or topic applies to only one
machine, this will be clearly indicated in the manual (for example, “D530”).
Displays Used in This Manual
The display shown in this manual is the factory preset display for the D560.
Depending on the system configuration and product purchased, the appearance of the
display may differ.
3
Main Functions
Scan
Scanning using the
Operation Panel → P.45
Remote Scanning from
Computers → P.46
Select a computer to save scanned
images in and scan images directly
from the operation panel.
Set to use the remote scan from the
machine, and then scan images from
a computer using the MF Toolbox.
Copy
1
2
3
1
2
3
1
2
3
<ON>
1
1
1
2
2
2
3
3
3
<OFF>
Collating Copies → P.32
Copying ID Card → P.33
Adjusting Quality → P.29
Collate copies when copying multiple
documents.
Copy both sides of an ID card onto a
single page.
Adjust image quality by setting the
density, resolution, and sharpness.
Enlarging and Reducing
→ P.29
Multiple Documents onto
Single Page → P.32
2-Sided Copying → P.31
Print multiple pages onto a single
page.
Print copies or documents on both sides
of paper.
Print
Booklet Printing → P.39
• Combine two pages onto a single
• Magnify and divide a single-paged image
page, and then print on both sides.
• Make a booklet by folding printouts
in half and binding.
to print on multiple sheets of paper.
• Make a poster by combining the prints
together.
Enlarging and Reducing
→ P.36
4
Poster Printing → P.40
Multiple Documents onto Single
Page → P.38
Print multiple pages onto a single page.
Watermark Printing → P.41
Add watermarks, such as “COPY” or
“DRAFT”, to the document.
2-Sided Printing → P.37
Print copies or documents on both
sides of paper.
Contents
Basic Operation
Learn the Names and Functions of Each Part of the Machine ………
Front Side ……………………………………………………………
Interior ………………………………………………………………
Back Side ……………………………………………………………
Learn the Functions of the Operation Panel …………………………
Switch to Copy or Scan Mode…………………………………………
Enter Text ……………………………………………………………
Set Date and Time ……………………………………………………
Place Documents ……………………………………………………
Placing Documents on the Platen Glass ……………………………
Placing Documents in the Feeder (D560 Only) ………………………
Load Paper ……………………………………………………………
Loading Paper in the Paper Cassette …………………………………
Loading Paper in the Multi-Purpose Tray ……………………………
Loading Envelopes or Paper with a Letterhead ………………………
Setting a Paper Size and Type ………………………………………
Switch to the Quiet Mode ……………………………………………
Switch to the Sleep Mode ……………………………………………
Use the Toner Saver Mode ……………………………………………
8
8
10
11
12
13
14
15
16
17
17
19
20
21
22
23
24
24
25
Copy
Make a Basic Copy ……………………………………………………
Enlarge or Reduce Copies ……………………………………………
Adjust the Image Quality for Copy ……………………………………
Adjusting the density ………………………………………………
Selecting the Document Type ………………………………………
Adjusting the sharpness ……………………………………………
Make Double-Sided Copies …………………………………………
Copy Multiple Pages onto One Sheet ………………………………
Collate Copies …………………………………………………………
Copy a Double-Sided ID Card …………………………………………
View and Cancel Copy Jobs …………………………………………
Change the Default Copy Settings ……………………………………
28
29
29
29
30
30
31
32
32
33
34
34
Print
Print a Document ……………………………………………………
Enlarge or Reduce a Document ………………………………………
Print a Double-Sided Document ……………………………………
Print Multiple Pages onto One Sheet …………………………………
Print a Booklet…………………………………………………………
Print a Poster …………………………………………………………
Add Watermarks to a Printout ………………………………………
View and Cancel Print Jobs……………………………………………
36
36
37
38
39
40
41
42
5
Scan
(→ p.69)
You can see frequantely asked
questions about the scan function.
Understand the Scanning Method……………………………………
Scan a Document with the Operation Panel …………………………
Scan a Document with the MF Toolbox ………………………………
Configuring Scan Settings Using the MF Toolbox ……………………
Scan a Document with the Scanner Driver …………………………
44
45
46
48
50
Maintenance and Management
Clean the Machine ……………………………………………………
Cleaning the Exterior and Interior ……………………………………
Cleaning the Fixing Unit ……………………………………………
Cleaning the Platen Glass and Feeder ………………………………
Check and Replace Toner Cartridges …………………………………
Conserving the Toner to Extend the Life of
Toner Cartridges ……………………………………………………
Replacing the Toner Cartridge ………………………………………
Manage Using the List Function ………………………………………
52
52
53
54
55
55
56
58
Troubleshooting
Clear Jams ……………………………………………………………
Clearing Document Jams in the Feeder (D560 Only) …………………
Clearing Paper Jams Inside the Machine ……………………………
Resolve a Displayed Message …………………………………………
Resolve an Error Code …………………………………………………
Improve Output Quality ………………………………………………
Resolve a Problem ……………………………………………………
60
61
62
65
65
66
68
FAQ …………………………………………………………………… 69
Recycling Used Cartridges ……………………………………………
The Clean Earth Campaign ……………………………………………
Important Safety Instructions ………………………………………
Legal Notices …………………………………………………………
Laser Safety ……………………………………………………………
6
71
71
72
74
74
Basic Operation
This chapter describes overall information about the machine, and how to
place the documents and load the paper. Read this chapter first.
Learn the Names and Functions of Each Part of the Machine ………
Front Side ……………………………………………………………
Interior ………………………………………………………………
Back Side ……………………………………………………………
Learn the Functions of the Operation Panel …………………………
Switch to Copy or Scan Mode…………………………………………
Enter Text ……………………………………………………………
Set Date and Time ……………………………………………………
Place Documents ……………………………………………………
Placing Documents on the Platen Glass ……………………………
Placing Documents in the Feeder (D560 Only) ………………………
Load Paper ……………………………………………………………
Loading Paper in the Paper Cassette …………………………………
Loading Paper in the Multi-Purpose Tray ……………………………
Loading Envelopes or Paper with a Letterhead ………………………
Setting a Paper Size and Type ………………………………………
Switch to the Quiet Mode ……………………………………………
Switch to the Sleep Mode ……………………………………………
Use the Toner Saver Mode ……………………………………………
8
8
10
11
12
13
14
15
16
17
17
19
20
21
22
23
24
24
25
7
Learn the Names and Functions of Each Part of the Machine
Front Side
D560
D530
Operation panel
Use the panel to control
the machine (→P.12).
Feeder (D560 only)
Automatically feeds documents into
the machine (→P.17).
Document feeder tray
Place your documents in this tray.
Document return tray
(D560 only)
Returns documents after
scanning.
Document guides
Adjust these guides to fit the
document.
Feeder cover (D560 only)
Open this cover to clear paper jams
(→P.17).
Front cover
Lift handles (left, right)
Hold these handles to lift or transport
the machine.
Power button
Open the cover to load
paper.
Turn the power ON or OFF.
Lower front cover
Open when using paper that is
larger than LTR size.
Paper level indicator
Shows the remaining amount of paper.
8
Basic Operation
Platen glass
Used to scan non-standard size paper
or books, as well as standard size paper
(→P.17).
Output tray
Printed documents are output here.
Paper stopper
Use the paper stopper to prevent
paper from falling out of the
output tray.
Ventilation slots
Allows heat to escape
from inside of the
machine. Leave more than
4” (10 cm) of space around
the machine.
Scanning area
Scans documents
from the feeder.
Multi-purpose tray
Load paper one by one manually (→P.21).
Paper guides
Adjust these guides to fit the paper.
Paper cassette (Auto)
Load paper here (→P.20).
Paper guides
Adjust these guides to fit the paper.
9
Interior
Toner cover
Open this cover to access the toner
cartridgeorclearpaperjams(→P.55,P.62).
Paper exit guide
Open this guide to clear paper jams
(→P.62).
Transfer roller
Transfers toner onto paper.
Toner guides
When inserting the toner cartridge, fit
the protrusions on the toner cartridge
into these guides.
10
D560
Basic Operation
Back Side
D530
Rating label
The machine’s serial number (consists of three
letters and a 5-digit number) and the required
voltage and current are specified.
Write the serial number on the back
cover of this guide for reference when
contacting the Canon Customer Center.
USB port
Connect to a computer via a
USB cable.
Power socket
Connect the power cord.
Rear cover
Open this cover to clear paper jams when
using the 2-sided copy function (→P.64).
11
Learn the Functions of the Operation Panel
Reset
Press to reset the settings.
0 to 9
Press to enter letters and
(Numeric Keys) numbers.
State Monitor/ Press to view or cancel jobs. You can also check the
status of the machine (→p.34, p.42).
Cancel
▲/▼
Press to scroll up and down, or to increase or
decrease a value.
◄/►
Press to return to the previous screen, proceed to the
next screen, or move the cursor to the left or right.
OK
Press to confirm an
Back
Press to switch the character
entry mode.
#
Press to enter symbols.
Quiet Mode
Clear
Press to return to the previous screen.
Paper Settings
*
Press to reduce the noise when
performing a job (→p.24).
Press to delete letters and
numbers.
Press to specify paper size and type for the paper
cassette or multi-purpose tray.
Mode switching Keys
Press to switch the mode to copy or scan (→p.13).
Display
N on 1
2-Sided
12
Press to select the setting for printing multiple
documents onto one sheet. The indicator of
the selected setting will be lit up and also the
item will be displayed on the LCD.
Press to select the setting for printing on both
sides of paper. The indicator of the selected
setting will be lit up and also the item will be
displayed on the LCD.
Processing/Data indicator
Blinks during transmission and turns on when
the machine has waiting jobs.
Error indicator
The indicator blinks when an error occurs.
Menu
Press to access menu functions (see
“Navigating the Menu” at the bottom of the
next page).
Report
Press to manually print reports and lists (→p.58).
Stop
Press to cancel jobs.
Image
Quality
Press to select the image quality for copying.
Start
Press to start copying or scanning.
Energy
Saver
Press to manually set or cancel the Sleep
mode. The Energy Saver indicator lights green
while in the Sleep mode (→p.24).
Example: Adjust the density
]
Press [
(Menu).
Press [
] (Back) or [◄] to
return to the previous screen.
Copy Settings
Change Defaults
Correct Density
Menu
Preferences
Timer Settings
Copy Settings
Adjustment/Maintena...
Press [▲] or [▼] to highlight
an item, and then press [OK].
Press [▲] or [▼] to highlight
an item, and then press [OK].
If you close the menu before you press [OK], the changes made to the
settings are not saved.
Basic Operation
Navigating the Menu
Correct Density
-
+
Press [◄] or [►] to adjust the
level, and then press [OK].
(If necessary, press [▲] or [▼].)
Press [
] (Menu) to save
the setting.
Switch to Copy or Scan Mode
Switch to Copy or Scan mode first to use each mode.
Press the key to switch between the
Copy and Scan modes.
If you do not operate the machine for a while, the machine
returns to the Copy mode (standby mode) automatically.
Copy Mode
Copy: Press Start
100% 1
LTR
Density: +
-0
Original Type: Text...
2-Sided: Off
01
Displays the copy ratio, paper source,
paper size, and number of copies.
To change the settings:
1. Press [▲] or [▼] to highlight an item, and
then press [OK].
2. Press [▲], [▼], [◄] or [►] to specify the
values, and then press [OK].
Scan Mode
Select the scan type.
Computer
Remote Scanner
To select the scan method:
Press [▲] or [▼] to highlight an item, and
then press [OK].
To specify how long the machine waits before returning to standby mode:
] (Menu)  <Timer Settings>  <Auto Reset Time>  Specify the time  [OK].
Press [
13
Enter Text
Enter characters with the alphanumeric keys.
To enter text, symbols, and numbers:
Press a key several times until the desired character is
displayed.
To switch entry modes:
<A>
Uppercase alphabetic letters and symbols
<a>
Lowercase alphabetic letters and symbols
<12>
Numbers
Key
Entry mode:
<A>
] ( ) repeatedly.
Press [
or
1. Press [▲] or [▼] to highlight <Entry Mode>,
and then press [OK].
2. Press [▲] or [▼] to highlight the desired
mode, and then press [OK].
@.-_/
Register Unit Name
<Apply>
Entry Mode: A
• Press to move the cursor.
• To enter a space, move the cursor
Entry mode:
<a>
Entry mode:
<12>
1
ABC
abc
2
DEF
def
3
GHI
ghi
4
JKL
jkl
5
MNO
mno
6
PQRS
pqrs
7
TUV
tuv
8
WXYZ
wxyz
9
(Not available)
0
-.*#!",;:^`_=/|´?$@
%&+\()[]{}<>
(Not available)
• Press to delete the last character.
• Press and hold to delete all text.
to the end of the text, and then
press [►].
Example: Enter “CANON1”
Press [ ] to switch the entry
mode to <A>.
Press [ ] until the letter “C”
appears on the screen.
C▌
Press [ ] until the letter “N”
appears on the screen.
CAN ▌
Press [ ] to switch the entry
mode to <12>.
CA ▌
Press [ ] until the letter “O”
appears on the screen.
CANO ▌
Press [
] to enter “1.”
CANON1 ▌
14
Press [ ] until the letter “A”
appears on the screen.
Press [ ] until the letter “N”
appears on the screen.
CANON ▌
Basic Operation
Set Date and Time
If the incorrect date or time is printed on reports, change the date and time settings.
1
2
3
Press [
] (Menu).
Press [▲] or [▼] to highlight <Timer Settings>, and then press [OK].
Press [▲] or [▼] to highlight <Time & Date Settings>, and then press [OK].
Timer Settings
Quiet Mode Time Set...
Time & Date Settings
Auto Sleep Time
Auto Reset Time
4
Press [▲] or [▼] to highlight <Current Time Settings>, and then press
[OK].
• To change the display format for the date or time, specify <Date Display Type> or
<12/24 Hour Clock>.
• To use daylight savings time, set <Daylight Savings> to <On>, and then specify
the starting date and the ending date.
5
Use the numeric keys to enter the date and time, and then press [OK].
• To move the cursor, press [◄] or [►].
• To switch between <AM> or <PM>, press [▲] or [▼].
Current Time Set.
01/01/2012 12:52 AM
(0:00-12:59)
6
Press [
] (Menu) to close the screen.
15
Place Documents
Choose the appropriate way to place documents according to the document’s type.
When placing non-standard documents such
as heavy paper, small paper, or booklets:
Check available documents
11 3/4" (297 mm)
8 1/2"
(215.9 mm)
Size (Width X Length)
Maximum
Weight
Maximum 4.4 lb (2 kg)
Capacity
1 sheet
Use the platen glass (→p.17).
When placing multiple documents of plain
paper in the same size, thickness, and weight:
Check available documents
14" (356 mm)
5" (127 mm)
Size (Width X Length)
5 1/2"
(140 mm)
Capacity (For 21 lb
Bond (80 g/m²))
Weight
Use the feeder (→p.17).
IMPORTANT
Max.
8 1/2"
(216 mm)
50 Sheets
1-sided documents
13.3 to 27.9 lb Bond (50 to 105 g/m²)
2-sided document
16.0 to 27.9 lb Bond (60 to 105 g/m² )
* D530 is not equipped with the feeder.
• Place a document after glue, ink, or correction fluid on the document is completely dry.
• To prevent paper jams in the feeder, place a document on the platen glass when using the following types of
paper:
-
16
Min.
Wrinkled or creased paper
Carbon paper or carbon-backed paper
Curled or rolled paper
Torn paper
Thin paper
Documents with staples or paper clips attached
Transparency
1
2
Open the feeder or the platen glass cover.
3
Align the document with the appropriate paper size marks.
• If the document does not match any of the paper size marks, align the upper left
Basic Operation
Placing Documents on the Platen Glass
Place your document face down.
edge of your document with the arrow mark.
• If the document is a transparency, place white paper above the document.
STMT
A5
B5
A4
LTR
CAUTION
• When closing the
feeder, be careful not
to get your fingers
caught.
• Do not press down
on the feeder
forcefully. This may
damage the platen
glass and cause
personal injury.
4
Close the feeder or the platen glass cover.
Placing Documents in the Feeder (D560 Only)
1
Spread the document guides a little wider than the document’s width.
2
Fan the document stack and align the edges of the pages.
Thoroughly fan the
paper in small batches.
Align the edges a few
times on a flat surface.
17
3
Neatly place the documents face up.
• Do not exceed the load limit guides (A).
• Make sure that the paper stack does not exceed the load limit marks (B).
A
B
4
Align the document guides tightly to the width of the document.
IMPORTANT
If the document guides are too loose or too tight, this may result in
misfeeds or paper jams.
IMPORTANT
• While scanning documents, do not add or remove documents.
• When scanning is complete, remove the document from the document
return tray to avoid paper jams.
• Do not scan the same document more than 30 times. When a document
is scanned repeatedly, the paper can become wrinkled, earmarked, or
torn, which may result in paper jams.
18
Basic Operation
Load Paper
Before loading paper, check the paper is the right type. If you load inappropriate paper
repeatedly, this may cause paper jams.
Step
1
Check if the type of paper is appropriate.
Paper such as Legal, Letter, Statement, Executive, and envelopes can be used. For details
about the available paper or precautions, see [Basic Operation]  [Loading paper] in
the e-Manual.
To prevent paper jams, do not use any of the following:
• Wrinkled or creased paper
• Curled or rolled paper
• Torn paper
• Damp paper
• Paper printed with a thermal transfer printer
(Do not copy on the reverse side.)
Step
2
Select where to load paper, and then load the paper.
Use the multi-purpose tray when
loading a sheet of
small-sized paper or
heavy paper (→p.21).
Use the paper cassette when
loading a stack of
plain paper in the
same size, thickness,
and weight (→p.20).
Check if the type of paper is appropriate.
If the setting is different from the size of the loaded paper, an error message
appears, or printing is not performed correctly.
19
Loading Paper in the Paper Cassette
This section describes how to load letter paper in the Paper Cassette. When loading
envelopes or paper with a letterhead, see ”Loading Envelopes or Paper with a Letterhead”
(→p.22).
1
Open the front cover and the lower front cover.
2
Spread the paper guides a little wider than the paper size.
3
Gently load the paper into the paper cassette with the print side face up,
until the edge of the paper stack meets the back of the paper cassette.
• Make sure that the paper stack does not exceed the load limit guides (A).
A
4
Adjust the paper guides tightly to the width and length of the paper.
IMPORTANT
20
If the paper guides are too loose or too tight, this may result in misfeeds
or paper jams.
Close the front cover and the lower front cover.
Basic Operation
5
6
Specify the loaded paper size and type (→p.23).
Loading Paper in the Multi-Purpose Tray
1
Open the front cover and the lower front cover.
2
Push down and lower the multi-purpose tray.
3
Spread the paper guides a little wider than the paper.
4
Gently load the paper into the multi-purpose tray with the print side face
up, and adjust the paper guides tightly to the width of the paper.
5
Specify the loaded paper size and type (→p.23).
21
Loading Envelopes or Paper with a Letterhead
This section describes how to load envelopes and paper with a letterhead.
Envelopes
Before Loading
Flatten envelopes
to release any
remaining air.
Loosen any stiff corners of the
envelopes, and flatten any
curls, as shown in the figure.
Loading Orientation
Load the envelopes with the flaps face up.
Envelope
No.10, DL, ISO-C5
Paper with a Letterhead or Logo
Loading Orientation
Load the paper properly by following the instructions below.
2-sided printing
Load the paper with the printed side
face down.
ABC
1-sided printing
Load the paper with the printed
side face up.
When printing with
portrait layout
When printing with
landscape layout
When printing with When printing with
portrait layout
landscape layout
If <Print Side Priority> is selected, load the paper with the printed
side face down regardless of 1-sided or 2-sided printing. For details, see
[Basic Operation]  [Select the Print Side] in the e-Manual.
22
Basic Operation
Setting a Paper Size and Type
Make sure that the Paper Settings match the size and the type of the loaded paper.
1
2
Press [
3
Press [▲] or [▼] to highlight the desired paper size, and then press [OK].
• To specify the paper size manually, select <Custom Size>, and then refer to
] (Paper Settings).
Press [▲] or [▼] to highlight <MP Tray> or <Drawer 1>, and then press
[OK].
“Specify a Paper Size Manually” at the bottom of this page to specify the size.
Paper Size
LTR
LGL
STMT
EXEC
4
Press [▲] or [▼] to highlight the desired paper type, and then press [OK].
Paper Type
Plain (16 lb Bond-24
Plain L (16 lb Bond...
Recycled
Color
5
Press [
] (Paper Settings) to close the screen.
Specify a Paper Size Manually
For paper size, specify within the possible range of length and width (<Y> ≥ <X>).
1
2
Press [▲] or [▼] to highlight <X>, and then press [OK].
Use the numeric keys to specify the width, and then press [OK].
Set Length for X
3_0/0 "
(3-8_1/2)
3
4
5
Press [▲] or [▼] to highlight <Y>, and then press [OK].
Use the numeric keys to specify the length, and then press [OK].
Press [▲] or [▼] to highlight <Apply>, and then press [OK].
23
Switch to the Quiet Mode
You can switch to and cancel the Quiet mode, by pressing [
] (Quiet Mode).
• By default, the Quiet mode is set to <Off>. To change this setting to <On>,
•
•
•
•
and specify the time to switch to the Quiet mode automatically, press
[
] (Menu)  <Timer Settings>  <Quiet Mode Time Settings>,
and then specify a time.
When the Quiet mode is On, the processing speed of functions becomes
slower.
The Quiet mode cannot be used with some paper sizes or types.
The Special mode has higher priority than the Quiet mode.
The Quiet mode only reduces noise that occurs while the machine is
performing jobs.
Switch to the Sleep Mode
You can switch to and cancel the Sleep mode, by pressing [
] (Energy Saver).
When the Processing/Data indicator is lit or blinking, the machine will not enter the
Sleep mode, because an operation is in progress or an error has occurred.
By default, the machine automatically enters the Sleep mode if you do not
perform any functions for 5 minutes. To change this setting, press [
]
(Menu)  <Timer Settings>  <Auto Sleep Time>, and then specify a
time.
24
Basic Operation
Use the Toner Saver Mode
You can set whether or not to conserve toner when copying. When using the Toner Saver
mode, the output may not be clear, as subtle details, such as thin lines and light colors, may
not be clearly reproduced.
1
2
3
Press [
] (Menu).
Press [▲] or [▼] to highlight <Preferences>, and then press [OK].
Press [▲] or [▼] to highlight <Toner Saver Mode>, and then press [OK].
Preferences
Display Settings
Toner Saver Mode
Paper Feed Method Sw...
4
5
6
Press [▲] or [▼] to highlight <Copy>, and then press [OK].
Press [▲] or [▼] to highlight <On> or <Off>, and then press [OK].
Press [
] (Menu) to close the screen.
25
Memo
26
Copy
This chapter describes basic copy functions.
Make a Basic Copy ……………………………………………………
Enlarge or Reduce Copies ……………………………………………
Adjust the Image Quality for Copy ……………………………………
Adjusting the density ………………………………………………
Selecting the Document Type ………………………………………
Adjusting the sharpness ……………………………………………
Make Double-Sided Copies …………………………………………
Copy Multiple Pages onto One Sheet ………………………………
Collate Copies …………………………………………………………
Copy a Double-Sided ID Card …………………………………………
View and Cancel Copy Jobs …………………………………………
Change the Default Copy Settings ……………………………………
28
29
29
29
30
30
31
32
32
33
34
34
27
Make a Basic Copy
1
Place your documents (→p.16).
* D530 is not equipped with the feeder.
IMPORTANT
2
3
If the document guides are too loose or too tight, this may result in
misfeeds or paper jams.
Switch to the Copy mode (→p.13).
Enter the desired copy quantity (1 to 99) with the alphanumeric keys.
] (Clear) to delete the entered copy quantity.
• Press [
Copy: Press Start
100% 1
LTR
Density: +
-0
Original Type: Text...
2-Sided: Off
01
4
Press [
] (Start).
Canceling Copy Jobs
Press [
] (Stop) twice.
* It is valid when only one job is processing or waiting.
28
Enlarge or Reduce Copies
Enlarge or reduce copies using preset copy ratios or custom copy ratios.
Place your documents (→p.16).
Switch to the Copy mode (→p.13).
Press [▲] or [▼] to highlight <Copy Ratio>, and then press [OK].
Copy
1
2
3
4
Press [▲] or [▼] to highlight the desired ratio, and then press [OK].
• If you want to set a copy ratio in 1% increments, select <Custom Ratio>, and then
enter the copy ratio using the numeric keys or press [▲] or [▼] to specify the ratio.
Copy Ratio
Custom Ratio
100% Direct
400% Max
200%
5
Press [
] (Start).
Adjust the Image Quality for Copy
Relation between the density and document type:
If <Density> is set to <Auto Density>, <Original Type> will be changed
to <Text>.
Adjusting the density
You can make the density brighter or darker than the original documents.
1
2
3
4
Place your documents (→p.16).
Switch to the Copy mode (→p.13).
Press [▲] or [▼] to highlight <Density>, and then press [OK].
Press [◄] or [►] to adjust the density , and then press [OK].
• Select <Auto Density> to use the density that is most suitable for the document.
Density
Auto Density
Manual Density
-
5
Press [
+
– : Less density (lighter)
+ : More density (darker)
] (Start).
29
Selecting the Document Type
Select the appropriate document type.
1
2
3
4
5
Place your documents (→p.16).
Switch to the Copy mode (→ p.13).
Press [▲] or [▼] to highlight <Original Type>, and then press [OK].
Press [▲] or [▼] to highlight the appropriate document type, and then
press [OK].
<Text>
Best suited for text-only documents.
<Text/Photo (High
Speed)>
Suitable for documents that contain text and photos.
(Scanned documents are at a low resolution at high
speed.)
<Text/Photo>
Suitable for documents that contain text and photos.
<Photo>
Suitable for documents that contain large photos.
Press [
] (Start).
Adjusting the sharpness
You can sharpen or soften the edges of images by adjusting the sharpness.
1
2
3
4
Place your documents (→p.16).
Switch to the Copy mode (→p.13).
Press [▲] or [▼] to highlight <Sharpness>, and then press [OK].
Press [◄] or [►] to adjust the sharpness, and then press [OK].
Sharpness
-
5
30
Press [
+
] (Start).
– : Less sharpness (Suitable for photos)
+ : More sharpness (Suitable for documents
written in pen or pencil)
Make Double-Sided Copies
You can make double-sided copies from single-sided documents. When using the D560,
you can also make double-sided or single-sided copies from double-sided documents.
1
Place your documents (→p.16).
• To make double-sided copies from single-sided documents, place the documents in
the feeder or on the platen glass.
Copy
• To make double-sided or single-sided copies from double-sided documents, place
documents in the feeder. (D560 only)
2
3
Switch to the Copy mode (→p.13).
Press [
lit.
] (2-Sided) until the indicator of desired 2-Sided copy format is
• If you press [OK], and then select <Format Settings>, you may specify the
orientation of your documents and the desired finishing format.
<Calendar Type>
4
Press [
<Book Type>
] (Start).
When placing your
documents in the feeder
Copying starts automatically.
When placing your
documents on the
platen glass
1. Press [▲] or [▼] to highlight the size of the original
document, and then press [OK].
• You may specify the scan size as <LGL> size, but
the actual size is <A4> size.
2. Place the next page on the platen glass, and then
press [ ] (Start).
• Press [ ] (Start) for every scanning.
3. After scanning all your documents, press [▲] or [▼]
to highlight <Start Copying>, and then press [OK].
31
Copy Multiple Pages onto One Sheet
You can combine multiple pages (two or four pages) onto one copy sheet.
1
2
3
Place your documents (→p.16).
Switch to the Copy mode (→p.13).
Press [
] (N on 1) until the indicator of desired format is lit.
• To specify the page layout, press [OK], and then select <Select Layout>.
<2 on 1 (1)>
<2 on 1 (2)>
<4 on 1 (1)> <4 on 1 (2)> <4 on 1 (3)> <4 on 1 (4)>
• To specify the scan size, press [OK], and then select the desired scan size.
• You may specify the scan size as <LGL> size, but the actual size is <A4> size.
4
Press [
] (Start).
Collate Copies
1
2
3
1
2
3
1
2
3
<ON>
1
1
1
<OFF>
32
2
2
2
3
3
3
You can arrange copies into sets arranged in page order by using the <Collate> function
when making multiple copies of multiple documents.
1
2
3
4
5
Place your documents (→p.16).
Switch to the Copy mode (→p.13).
Press [▲] or [▼] to highlight <Collate>, and then press [OK].
Press [▲] or [▼] to highlight <On>, and then press [OK].
Press [
] (Start).
Copy a Double-Sided ID Card
You can make a copy of a double-sided ID card onto single-sided paper.
1
Place an ID on the platen glass.
• Place the card at the center of the left edge of the platen glass, with a 1/4” (5 mm)
space created.
Copy
To place the card horizontally
STMT
A5
B5
STMT
A4
A5
LTR
5mm
To place the card vertically
STMT
A5
B5
STMT
A4
5mm
A5
LTR
2
3
4
5
Switch to the Copy mode (→p.13).
Press [
] (N on 1) until the indicator of ID Card Copy is lit.
Press [
] (Start).
Turn and place the card.
STMT
A5
B5
A4
STMT
LTR
A5
6
Press [
] (Start).
• The copy ratio is automatically set to <100%>.
• You can only use Letter size or larger paper for ID card copying.
33
View and Cancel Copy Jobs
You can view or cancel copy jobs while the jobs are in progress.
1
2
3
Press [
] (Status Monitor/Cancel).
Press [▲] or [▼] to highlight <Copy Job Status>, and then press [OK].
View the details of a copy job or cancel the job.
• To view the details, press [▲] or [▼].
• To cancel the job, press [▲] or [▼] to highlight <Cancel>, and then press [OK].
Copy Job Status
<Cancel>
Job Number: 0001
Status: Copying
Time: 01/01 12:52 AM
4
Press [
] (Status Monitor/Cancel) to close the screen.
Change the Default Copy Settings
You can change the default copy settings that are applied when the machine is restarted,
[
] (Reset) is pressed or the screen is returned to the default screen after auto reset is
performed.
1
2
3
4
5
6
7
34
Press [
] (Menu).
Press [▲] or [▼] to highlight <Copy Settings>, and then press [OK].
Press [▲] or [▼] to highlight <Change Defaults>, and then press [OK].
Press [▲] or [▼] to highlight the desired option, and then press [OK].
<No. of Copies>
Select the copy quantity.
<Density>
Make the density lighter or darker.
<Original Type>
Select the image quality.
<2-Sided>
Copy 1-sided document to 2 sides.
<Copy Ratio>
Select the copy ratio.
<N on 1>
Copy multiple documents onto one sheet.
<Collate>
Collate copies of a complete copy job arranged in page
sequential order or by page.
<Sharpness>
Emphasize the outline of the image or decrease the contrast.
Specify the desired setting.
After you have specified the setting, press [▲] or [▼] to highlight
<Apply>, and then press [OK].
Press [
] (Menu) to close the screen.
Print
This chapter describes basic print functions.
Print a Document ……………………………………………………
Enlarge or Reduce a Document ………………………………………
Print a Double-Sided Document ……………………………………
Print Multiple Pages onto One Sheet …………………………………
Print a Booklet…………………………………………………………
Print a Poster …………………………………………………………
Add Watermarks to a Printout ………………………………………
View and Cancel Print Jobs……………………………………………
36
36
37
38
39
40
41
42
Before using the printing functions, connect the machine to a computer
and install the printer driver on the computer. See the Starter Guide to learn
how to install the printer driver.
• You cannot specify printing options with the printer driver and another
application at the same time.
• Your computer screen may differ from the images shown here,
depending on your operating system and the type and version of the
printer driver.
35
Print a Document
1
Make sure that a computer and the machine are connected properly, and
the printer driver is are installed on the computer.
2
3
Open a document from an application, and then open the Print window.
4
Click [Print] to start printing.
Select your printer.
Canceling Print Jobs
Press [
] (Stop) twice.
* It is valid when only one job is processing or waiting.
Enlarge or Reduce a Document
You can enlarge or reduce the data to fit the paper size automatically, or specify a custom
ratio.
1
2
3
36
Open a document from an application, and then open the Print window.
Select your printer, and then open the Printing Preferences window.
Click the [Page Setup] tab, and then specify the print ratio.
Select the paper size of
the document.
To automatically scale the
document to fit the loaded
paper, select an output size.
To specify the print ratio
manually, select [Manual
Scaling], and then specify
the scaling ratio.
Print
4
5
Click [OK] to return to the Print window.
Click [OK] to start printing.
Print a Double-Sided Document
You can print on both sides of paper.
1
2
3
Open a document from an application, and then open the Print window.
Select your print, and then open the Printing Preferences window.
Click the [Finishing] tab, and then specify the settings for double-sided
printing.
Select [2-sided Printing].
Select the binding edge.
4
5
Click [OK] to return to the Print window.
Click [OK] to start printing.
Supported document sizes for double-sided printing varies depending on
the models. For details, see [Specifications]  [Supported Paper Types]
in the e-Manual.
37
Print Multiple Pages onto One Sheet
You can reduce and print 2, 4, 6, 8, 9, or 16 pages of an original document onto a single
sheet of paper. This feature allows you to save paper or to view several pages at once.
1
2
3
Open a document from an application, and then open the Print window.
Select your printer, and then open the Printing Preferences window.
Click the [Page Setup] tab, and then specify the number of pages and a
page layout.
Select the number of pages
to print on a single page.
Select the page layout.
4
5
Click [OK] to return to the Print window.
Click [OK] to start printing.
You cannot enlarge or reduce the documents manually when using this
function.
38
Print a Booklet
You can print pages side-by-side, and then fold them to create a booklet.
1
2
3
Open a document from an application, and then open the Print window.
4
Specify the settings for the booklet, and then click [OK].
Select your printer, and then open the Printing Preferences window.
Click the [Finishing] tab, select [Booklet Printing], and then click [Booklet].
Print
You can choose to print all
pages at once or print sets
of pages according to the
specified number of pages.
To specify the margin for binding, select
the check box, and then enter the value.
5
6
7
Click [OK] to return to the Print window.
Click [OK] to start printing.
Make a booklet by folding the printouts in half.
39
Print a Poster
You can enlarge a one-page document and print it on multiple pages. You can then
combine the printed pages to create a large poster.
1
2
3
Open a document from an application, and then open the Print window.
Select your printer, and then open the Printing Preferences window.
Click [Page Setup] tab, and then select [Poster(N×N)] from the
[Page Layout] drop-down menu.
Select [Poster [N×N]]
(N×N is split numbers of
divided pages wide by
high).
4
5
6
Click [OK] to return to the Print window.
Click [OK] to start printing.
Make a poster by gluing or taping the printouts together.
You cannot combine this feature with watermark printing, manual scaling, or
printing multiple pages onto one sheet.
40
Add Watermarks to a Printout
You can add watermarks, such as “DRAFT,” to a document.
1
2
3
Open a document from an application, and then open the Print window.
Select your printer, and then open the Printing Preferences window.
Click the [Page Setup] tab, and then specify the settings for watermark
printing.
Print
Select to add
watermarks.
Select the desired
watermark.
4
To create a new watermark, click [Edit Watermark], and then enter the
new text.
Add the edited watermark.
Delete the selected
watermark from the list.
Enter the text for the
watermark.
Specify watermark options.
5
6
Click [OK] to return to the Print window.
Click [OK] to start printing.
You can register up to 50 new watermarks, in addition to the provided
watermarks.
41
View and Cancel Print Jobs
You can view or cancel print jobs that are waiting or in progress.
1
2
3
Press [
] (Status Monitor/Cancel).
Press [▲] or [▼] to highlight <Print Job Status>, and then press [OK].
View the details of a print job or cancel the job.
• Press [▲] or [▼] to view the print job status.
• Press [OK] to view the detailed information.
• To cancel the job, press [▲] or [▼] to highlight <Cancel>, and then press [OK].
Details
<Cancel>
Job Number: 0020
Status: Printing
Time: 01/01 09:42AM
4
42
Press [
] (Status Monitor/Cancel) to close the screen.
Scan
This chapter describes the basic scan functions.
(→ p.69)
You can see frequentely asked
questions about the scan function.
Understand the Scanning Method……………………………………
Scan a Document with the Operation Panel …………………………
Scan a Document with the MF Toolbox ………………………………
Configuring Scan Settings Using the MF Toolbox ……………………
Scan a Document with the Scanner Driver …………………………
44
45
46
48
50
43
Understand the Scanning Method
Various scanning methods are provided.
Scan a Document with the Operation
Panel (→p.45).
Basic
Method
Connect your
computer to
the machine.
You can use the operation panel to scan an image, and
then send the image to a computer.
Scan a Document with the MF Toolbox
(→p.46).
You can set the various scan settings with the MF
Toolbox.
Scanning with
Detailed Scan
Settings
(Use a driver from a
computer)
Connect
ct your
computer
ute to the
machine,
ne, and
install MF driver
and MFF TToolbox
on the co
computer.
Scan a Document with the Scanner Driver
(→p.50).
You can set the various scan settings with the scanner
driver (ScanGear MF Window).
Scan a Document using WIA driver
For more details, see [Scanning]  [Scanning Using the
WIA Driver (Window XP/Vista/7 Only)] in the e-Manual.
Scan a Document using the TWAIN driver
For more details, see [Scanning]  [Scanning an Image
from an Application] in the e-Manual.
44
Scan a Document with the Operation Panel
You can scan a document using the Scan mode.
1
Make sure that a computer and the machine are connected (See the
Starter Guide).
2
Place your documents (→p.16).
Scan
* D530 is not equipped with the feeder.
3
4
Switch to the Scan mode (→p.13).
Press [▲] or [▼] to highlight <Computer>, and then press [OK].
Select the scan type.
Computer
Remote Scanner
5
Press [▲] or [▼] to specify a destination, and then press [OK].
Specify destination.
Example 1
Example 2
6
Press [▲] or [▼] to specify the scan settings.
• Scan the document in color (300 dpi), and then save as a
<Color Scan>
PDF file.
• PDF settings: Searchable/Compact
<B&W Scan>
Scan the document in black and white (300 dpi), and then
save as a TIFF file.
<Custom 1>
Scan the document in color (300 dpi), and then save as a
JPEG/Exif file.
• Scan the document in color (300 dpi), and then save as a
<Custom 2>
PDF file.
• PDF settings: Searchable/Standard
45
7
Press [OK] to start scanning.
When placing your
documents in the feeder
Scanning operation starts.
When placing your
documents on the
platen glass
1. To continuously scan the document, press [▲] or
[▼] to highlight <Scan Next Original>, and then
press [OK].
2. press [▲] or [▼] to highlight <Store and Finish>,
and then press [OK].
• When scanning is complete, the folder that contains the scanned images is opened
on the screen of the computer.
Canceling Scan Jobs
Press [
] (Stop) twice.
* It is valid when only one job is processing or waiting.
Default Folder for Saving Scanned Images
By default, a new folder named after the date you scanned is created in the [Pictures] folder.
(For Windows XP, the folder is created in the [My Pictures] folder in [My Documents].)
Scan a Document with the MF Toolbox
You can specify various scan settings if you select <Remote Scanner> from the operation
panel, and then open the MF Toolbox.
46
1
Make sure that a computer and the machine are connected properly, and
the MF Toolbox is installed on the computer (See the Starter Guide).
2
Place your documents (→p.16).
• Use the platen glass for a higher scan quality.
3
Switch to the Scan mode (→p.13).
4
Press [▲] or [▼] to highlight <Remote Scanner>, and then press [OK].
Select the scan type.
Computer
Remote Scanner
5
From your computer, double-click the [Canon MF Toolbox 4.9] icon.
6
When the MF Toolbox appears, click the desired scan mode button.
• The scan preset for an e-mail attachment is displayed.
• The scanned document will be attached to a new message
Scan
[Mail]
in your e-mail application.
• The scan preset for the OCR (Optical Character Reader) is
[OCR]
[Save]
displayed.
• The scanned document will be read by your OCR software.
• The scan preset for a high quality scanning is displayed.
• The scanned document will be saved in the default folder
or in a destination that you specify.
• The scan preset for the multiple page searchable PDF is
[PDF]
displayed.
• The scanned document will be saved as a PDF file.
[Color Scan]
[B&W Scan]
[Custom 1]
• The custom setting is displayed.
• The scanned document will be saved in a destination.
[Custom 2]
7
When the scan setting window appears, specify the scan settings as
needed (→p.48).
8
Click [OK] to start scanning.
• When scanning is complete, the folder in which the scanned document is saved is
opened automatically.
• The scanned document will be opened in the registered application.
9
When scanning is complete, click [
] to close the MF Toolbox.
47
Configuring Scan Settings Using the MF Toolbox
This section describes the layout and features of each setting dialog box of the MF Toolbox.
For more details, see [Scanning] → [Using the MF Toolbox] in the
e-Manual.
• Set the location of a document to
be scanned.
• [Auto Mode] that detects
the source automatically is
recommended.
Example: When [Mail] or [PDF] menu is selected in MF Toolbox
Set the size of the document to
be scanned.
• Set the color mode.
• This setting is not available when
scanning using the [Color Scan]
or [B&W Scan] button.
• Set the size limit of attached files.
• This setting is available only when
scanning using the [Mail] button.
• Set the scanning resolution.
• If you select a higher resolution,
the image quality becomes higher,
and the file size becomes bigger.
• Set the file name, file type, and
location to be saved for the
scanned image.
• Manually set the location to save
the scanned image by clicking
[Browse].
• Select to specify the format or
location to save the scanned
image after scanning.
48
Reset the configured settings to the
default values.
Scanning
starts.
• Select to specify the scan settings using the
scanner driver (→p.50).
• When [Start] is clicked with this check box
selected, the [ScanGear MF] dialog box
appears.
• This check box is not available when you scan
using the [OCR] button.
Scan
Set the orientation of the document.
Set the PDF file type to save the scanned
image.
PDF (Single
Page)
Creates a single-page
PDF file.
PDF
(Multiple
Pages)
Save all scanned
images as a single PDF
file.
• Add the scanned
PDF (Add
Pages)
image to the last
page of an existing
PDF file.
• Click [Browse] on
[Save Scanned
Image to] to select a
PDF file to add.
If you selected PDF as the file type, you
can create a searchable PDF. Also, you
can set the compression ratio.
• Set an application to display the scanned image.
• Click [Set] to select an application or drag and drop the
application icon.
• Click [Delete] to save the file without using the applications.
49
Scan a Document with the Scanner Driver
If you use the scanner driver window (ScanGear MF Window), you can use various features
and scan only the necessary part with the preview function.
1
Make sure that a computer and the machine are connected properly, and
the MF Toolbox is installed on the computer (See the Starter Guide).
2
3
4
5
6
Place your documents (→p.16).
7
When the scan setting window appears, select the [Display the Scanner
Driver] check box, and then click [Start].
8
Select [Preview] on the scanner driver dialog box, and then specify
settings as needed.
Switch to the Scan mode (→p.13).
Press [▲] or [▼] to highlight <Remote Scanner>, and then press [OK].
From your computer, double-click the [Canon MF Toolbox 4.9] icon.
When the MF Toolbox appears, click the desired scan mode button.
• You may not use the ScanGear MF when using the [OCR] mode.
Crops the borders detected in the preview image.
Deletes the selected cropping frames.
Rotates the image 90 degrees to the left.
Rotates the image 90 degrees to the right.
Specify various
scanner settings
on each tab.
You can preview the
image applied to the
scan setting values.
9
Click [Scan] to start scanning.
• When scanning is complete, the folder in which the scanned document is saved
opens automatically.
• If an application is specified, the scanned document will be opened in the
application.
10 When scanning is complete, click [
50
] to close the MF Toolbox.
Maintenance and Management
This chapter describes how to clean the machine, replace the toner cartridge,
and explains the report and list function used for managing the machine.
Clean the Machine ……………………………………………………
Cleaning the Exterior and Interior ……………………………………
Cleaning the Fixing Unit ……………………………………………
Cleaning the Platen Glass and Feeder ………………………………
Check and Replace Toner Cartridges …………………………………
Conserving the Toner to Extend the Life of Toner Cartridges…………
Replacing the Toner Cartridge ………………………………………
Manage Using the List Function ………………………………………
52
52
53
54
55
55
56
58
51
Clean the Machine
Clean the exterior and interior of the machine, platen glass, feeder, and the fixing unit
periodically.
Cleaning the Exterior and Interior
Clean the exterior and interior of the machine to prevent toner powder and paper dust
from accumulating inside.
IMPORTANT
For safety, be sure to turn OFF the machine and disconnect all cables from
the machine before cleaning the machine. When you finish cleaning the
machine, wait for it to dry completely before reconnecting the power cord,
and then turn ON the power.
Cleaning the Exterior
1
2
3
Turn OFF the machine and disconnect all the cables from the machine.
4
5
Wait for the printer to dry completely.
Remove any documents from the platen glass or feeder.
Clean the exterior of the machine and ventilation slots with a soft, well
wrung-out cloth dampened with water or a mild detergent that has been
diluted with water.
Reconnect all the cables, and then turn ON the power.
Cleaning the Interior
1
2
3
52
Turn OFF the machine and disconnect all the cables from the machine.
Remove any documents from the platen glass or feeder.
Lift the scanning platform, open the toner cover, and then remove the
toner cartridge.
4
Remove any toner or paper debris from the interior of the machine, with
a soft, dry cloth that is clean and lint-free.
5
6
7
Insert the toner cartridge.
Close the toner cover, and then lower the scanning platform.
Reconnect all the cables, and then turn ON the power.
CAUTION
Maintenance and Management
When closing the scanning platform:
Be careful not to get your fingers caught.
Do not touch the fixing unit (A).
Touching the fixing unit (A) may cause
burns as it becomes very hot during use.
(A)
If you get toner on your hands or
clothing:
If toner gets on your hands or clothing,
wash them immediately with cold water.
Washing with warm water makes it
impossible to remove the toner stains.
Cleaning the Fixing Unit
Clean the fixing unit when black streaks appear on printed pages.
1
2
Press [
3
4
Press [▲] or [▼] to highlight <Clean Fixing Unit>, and then press [OK].
5
When the cleaning is complete, press [
] (Menu).
Press [▲] or [▼] to highlight <Adjustment/Maintenance>, and then press
[OK].
Load Letter size plain paper in the multi-purpose tray, and then press
[OK].
• The cleaning process begins. Cleaning takes approximately 90 seconds.
] (Menu) to close the screen.
53
Cleaning the Platen Glass and Feeder
If a scanned image has unexpected specks, clean the platen glass and feeder.
Cleaning the Platen Glass
1
2
3
4
Turn OFF the machine and disconnect all the cables from the machine.
Remove any documents from the platen glass.
Open the feeder or the platen glass cover.
Clean the platen glass and the under surface of the feeder.
• Clean the platen glass with a well wrung out cloth dampened with water and wipe it
with a soft, dry cloth.
5
6
Close the feeder or the platen glass cover.
Reconnect all the cables, and then turn ON the power.
Cleaning the Feeder
1
2
3
Turn OFF the machine and disconnect all the cables from the machine.
Remove any documents from the feeder.
Open the feeder cover, clean the rollers with a well wrung-out cloth
dampened with water, and then wipe them with a soft and dry cloth.
MF4890dw
4
5
54
Close the feeder cover.
Reconnect all the cables, and then turn ON the power.
Check and Replace Toner Cartridges
Toner cartridges are consumable products. When the toner has almost run out, streaks may
appear on printed pages. Replace the toner cartridge if necessary.
Gently shake the toner cartridge 5-6 times to
evenly distribute the toner (→p.55).
Maintenance and Management
If the print result is not improved, replace the toner
cartridge (→p.56).
Conserving the Toner to Extend the Life of
Toner Cartridges
If you redistribute the toner, you may be able to print for some time until the toner runs out.
1
Lift the scanning platform, open the toner cover, and then remove the
toner cartridge.
2
Gently shake the toner cartridge 5-6 times to evenly distribute the toner.
CAUTION
If toner gets on your
hands or clothing, wash
them immediately with
cold water. Do not wash
with warm water, as it
sets the toner and makes
it impossible to remove
the toner stains.
55
3
Insert the toner cartridge.
4
Close the toner cover, and then lower the scanning platform.
Replacing the Toner Cartridge
You can purchase replacement toner cartridges from your local authorized Canon dealer.
Supported genuine Canon toner cartridge:
Canon Cartridge 128 Starter
1
Open the operation panel and the toner cover, and then remove the
toner cartridge.
2
Prepare a new toner cartridge.
• Store the protective bag. It is required when you remove the toner cartridge for
printer maintenance or other purposes.
Shake the toner cartridge 5-6
times to evenly distribute the
toner.
Place the toner cartridge on a
flat surface, remove the tab, and
carefully pull the sealing tape
completely out (20” (50 cm)).
56
IMPORTANT
When pulling out the sealing tape:
• Do not pull the sealing tape at an angle or up and down. If the tape
breaks, it may not be pulled out completely.
• Even if the sealing tape stops at midpoint, pull it out of the toner
cartridge completely.
• If any tape remains in the toner cartridge, this may result in poor
print quality.
Disposing of the removed sealing tape:
Dispose of the packing materials according to local regulations.
Insert the toner cartridge.
4
Close the toner cover, and then lower the scanning platform.
Maintenance and Management
3
WARNING
Do not dispose of a used toner cartridge in open flames.
This may cause the toner remaining inside the cartridge to ignite, resulting in burns
or a fire.
When cleaning up spilled or scattered toner:
If you accidentally spill or scatter toner, carefully gather the toner particles together
or wipe them up with a soft, damp cloth in a way that prevents inhalation.
Never use a vacuum cleaner to clean up spilled toner. Doing so may cause a
malfunction in the vacuum cleaner, or result in a dust explosion due to static
discharge.
CAUTION
If you get toner on your hands or clothing:
Wash them immediately with cold water. Washing with warm water sets the toner,
making it impossible to remove the toner stains.
Do not allow the toner to scatter.
Do not pull out the sealing tape forcefully or stop before it is removed, as this
may cause toner to spill out. If toner gets into your eyes or mouth, flush them
immediately with cold water and immediately consult a physician.
57
• Follow all local and federal regulations when disposing of the sealing tape
removed from the new toner cartridge.
• Canon will collect and recycle your used toner cartridges (→p.71).
• For more details about handling toner cartridges, see [Handling Toner
Cartridges] in the e-Manual.
Manage Using the List Function
Print out lists to view information about the machine and settings.
1
2
3
4
5
Press [
] (Report).
Press [▲] or [▼] to highlight <Print Report Lists>, and then press [OK].
Press [▲] or [▼] to highlight <User Data List>, and then press [OK].
Follow the on-screen instructions to print the report or list.
Press [
] (Report) to close the screen.
Report and list printouts are limited to 10 pages.
58
Troubleshooting
This chapter describes how to clear paper jams and offers solutions to
problems you may be having.
Clear Jams ……………………………………………………………
Clearing Document Jams in the Feeder (D560 Only) …………………
Clearing Paper Jams Inside the Machine ……………………………
Resolve a Displayed Message …………………………………………
Resolve an Error Code …………………………………………………
Improve Output Quality ………………………………………………
Resolve a Problem ……………………………………………………
60
61
62
65
65
66
68
59
Clear Jams
When <Paper jam.> appears on the display, a paper jam has occurred in the feeder or
inside the machine. To remove the jammed document or paper, follow the instructions on
the display.
Paper jam.
Press [ ] to
display steps.
WARNING
When removing jammed documents or paper:
Use caution to avoid paper cuts.
When removing jammed paper or inspecting the inside of the machine:
Do not allow necklaces, bracelets, or other metal objects to touch the inside of the
machine, as this may result in burns or electrical shock.
CAUTION
If loose toner comes into contact with your skin or clothing:
Wash with cold water. Do not wash with warm water, as this will set the toner and
cause it to stain your skin or clothing.
When removing jammed documents or paper:
If paper is jammed, remove it carefully so that no pieces of paper remain inside the
machine according to the displayed message. Also, do not put your hand in an
area other than indicated areas, as this may result in personal injuries or burns.
IMPORTANT
If the jammed paper is torn:
Remove all torn pieces to avoid further jams.
If repeated paper jams occur:
Do the following:
• Make sure that the following packing material is completely
removed.
This part (a plastic part
attached to the end of paper)
is also a packing material. Be
sure to remove it.
• Fan the paper stack and tap the edge on a flat surface to align the
paper before loading it into the machine.
• Make sure that the paper meets the requirements for use (→ p.19).
• Make sure that you have removed all scraps of paper from the inside
of the machine.
60
Clearing Document Jams in the Feeder (D560 Only)
After removing any documents placed in the feeder, follow the procedure below to remove
jammed documents.
Open the feeder cover and lift the lock release lever.
2
Remove any jammed document by pulling it gently.
3
Hold the green grip, and then open the inner cover.
4
Remove any jammed document by pulling it gently.
5
6
7
Close the inner cover.
Troubleshooting
1
Replace the release lever and close the feeder cover.
Place documents in the feeder.
61
Clearing Paper Jams Inside the Machine
Follow the procedure below to remove jammed paper.
Step
1
Check and remove the jammed paper inside the machine.
1
2
Lift the scanning platform, and then open the toner cover.
3
Remove any jammed paper by pulling it gently.
4
Push up the green colored part (A), and then pull the paper exit guide (B)
to open.
Remove the toner cartridge.
(A)
(B)
5
Remove any jammed paper by pulling it gently.
6
Lift the paper exit guide, and then firmly close it.
• Ensure that each end of the paper exit guide is closed.
7
Gently pull any jammed paper downward from between the fixing unit
(A) and roller (B) until the leading edge emerges from the machine.
(A)
(B)
62
8
When the leading edge emerges, hold both sides of the jammed paper
and carefully pull it out.
Step
2
Check and remove the jammed paper in the paper cassette.
Open the front cover and lower front cover.
2
Remove any paper in the multi-purpose tray.
3
Pull up the multi-purpose tray, and then remove any paper loaded in the
paper cassette.
4
Remove any jammed paper by pulling it gently.
5
Reload paper into the paper cassette and close the front cover and lower
front cover.
Troubleshooting
1
63
Step
3
Check and remove the jammed paper in the rear cover.
1
Open the rear cover.
2
Remove any jammed paper by pulling it gently.
3
Close the rear cover.
Step
1
2
4
Lower the scanning platform and restore to a printable
condition.
Insert the toner cartridge.
Close the toner cover and lower the scanning platform.
CAUTION
Do not touch the fixing unit (A).
Touching the fixing unit (A) may cause
burns as it becomes very hot during
use.
(A)
Do not touch the transfer roller (B).
Touching the transfer roller may
damage the machine.
(B)
(A)
64
Resolve a Displayed Message
This section describes some of messages related to the memory and paper.
For more details about other messages, see [Troubleshooting] 
[Onscreen Messages] in the e-Manual.
Message
Action
<Memory is full. Scanning
canceled. Print?>
<Incorrect Size/Setting>
• Print pages successfully scanned or cancel the job.
• Split the job into smaller subsets or change the <Original Type>. Change the
document type in <Photo  ...  Text> order.
• Change the <Paper Settings> to the size of the loaded paper
(→p.22).
• When printing with the printer driver, verify that the paper size setting on the
computer is correct.
<No Paper: Drawer 1>
<No Paper: MP Tray>
• Load paper same as the paper type displayed on the screen (→p.22).
Resolve an Error Code
If an error occurs, a report that contains a 3-digit error code is printed. Locate the error code in the table and follow the
recommended actions to resolve the problem.
Cause
Action
#001
A document jam has occurred.
Remove the jammed document.
The machine’s memory is full.
Print or delete any documents stored in memory.
The data size exceeds the machine’s
available memory.
Reduce the data resolution or change the file format to reduce
the data size.
#037
Troubleshooting
Error Code
65
Improve Output Quality
Follow the recommended actions for each symptom to improve the output quality.
If you cannot solve the problem with the following actions,
see [Troubleshooting]  [Printing Results Are Not Good]
in the e-Manual.
Symptom
Example
Action
Paper curls.
•
•
•
•
Verify that the appropriate paper is being used (→p.19).
Print a test page with new paper.
Verify that the paper is loaded properly (→p.19).
Change the <Special Mode V> setting from the operation panel.
Paper creases.
•
•
•
•
•
Verify that the appropriate paper is being used (→p.19).
Print a test page with new paper.
Verify that the paper is loaded properly (→p.19).
Remove any foreign objects inside the machine.
Change the <Special Mode V> setting from the operation panel.
Printing is uneven.
•
•
•
•
Verify that the appropriate paper is being used (→p.19).
Print a test page with new paper.
Verify that the paper is loaded properly (→p.19).
Change the <Special Mode J> setting from the operation panel.
White specks appear.
• Verify that the appropriate paper is being used (→p.19).
• Print a test page with new paper.
• If printing high-contrast documents from a computer, open the
printer driver and select [Finishing]  [Advanced Settings] 
[Special Print Mode]  [Special Settings 2] to adjust the density.
The toner adheres to
your hand.
66
• Verify that the appropriate paper is being used (→p.19).
• Print a test page with new paper.
• Change the <Special Mode K> setting from the operation panel.
Symptom
Example
Action
• Verify that the appropriate paper is being used (→p.19).
• Print a test page with new paper.
• If the machine is not in use for a long time after the toner cartridge
The printed paper has
vertical steaks.
Smudge marks of
spattering toner
appear around the
text or as patterns.
The overall print result
is dark.
has been replaced, change the <Special Mode B> settings from
the operation panel.
• When copying, change the <Special Mode Z> and
<Special Mode D> settings from the operation panel.
• When printing from a computer, change the <Special Mode D>
settings from the operation panel, or change the [Special Print
Adjustment] settings from the printer driver.
• Verify that the appropriate paper is being used (→p.19).
• Print a test page with new paper.
• Change the <Special Mode U> settings from the operation panel.
• Adjust the copy density settings (→p.29).
• If the machine is exposed to direct sunlight or strong light, move the
machine to another location.
The bottom edge of
paper has smudge
marks.
Provide a margin around the data.
A portion of the page
is not printed.
Provide a margin around the data.
Printed bar codes
cannot be scanned.
If printing a bar code from a computer, open the printer driver and
select [Finishing]  [Advanced Settings]  [Special Print Mode]
 [Special Settings 1] to change the printing preferences.
Troubleshooting
67
Resolve a Problem
Follow the procedures below to resolve your problem.
WARNING
If the machine makes strange noises or emits
smoke or odors:
Turn OFF the power immediately, disconnect the
power cord, and contact the Canon Customer Care
Center. Do not attempt to disassemble or repair the
machine yourself.
IMPORTANT
1
Verify that the Error indicator is not
on or blinking.
• Make sure that paper is loaded properly
(→p.19).
• Remove any jammed paper (→p.60).
• Turn OFF the power, wait for more than
10 seconds, and then turn it ON again.
If you attempt to repair the machine by
yourself, it may void the limited warranty.
Verify that the cables are connected
properly and that the power is
switched ON (See the Starter Guide.)
Verify that no message appears on
the display.
• If a message appears, resolve the problem
(→p.65).
If you cannot solve the problem
See [Troubleshooting] in the e-Manual
or the Q&A from the support page of the
official Canon Web site.
2
Verify that the machine is not in
Sleep mode (→ p.24).
• If the [Energy Saver] key blinks, press it to
exit the Sleep mode.
If you cannot solve the problem
Contact your local authorized Canon dealer
or the Canon help line for assistance.
Press [Status Monitor/Cancel] to
check the status of the machine.
• If there are jobs in process, wait until the jobs
are finished.
68
Please have the following information ready when you
contact Canon.
• Product name
• Serial number
• Place of purchase
• Nature of problem
• Steps you have taken to solve the problem and the
results
FAQ
Q
Can I use the scan function when using a machine and drivers that are shared by
another person?
└A
Q
No, you may not use the scan function when sharing drivers that are installed to
another computer. To use the scan function, install the MF Drivers on your computer.
You can use the supplied user software CD-ROM or download the drivers from the official Canon
Web site (http://www.usa.canon.com).
For details about installing drivers, see the Starter Guide.
To which file formats can I save the scanned images?
└A
You may save scanned files to the following formats:
• BMP
• TIFF
• JPEG/Exif
• PDF
When saving as a PDF file, you can create a PDF file of a single or multiple page document, or
add a page to an existing PDF file.
Q
Can I change the folder that the scanned images are saved to?
└A
Yes, you can change the folder to save the scanned images when scanning with the
MF Toolbox.
To change,
1. From the MF Toolbox screen, click [Browse].
2. Locate a folder to save the scanned images, and then click [OK].
69
Q
Can I scan multiple images and save as a single PDF file?
└A
Yes, you can save multiple images as a single PDF file when scanning with the MF
Toolbox.
To make a single PDF file of multiple pages,
1. From the PDF mode screen of MF Toolbox, select [PDF (Multiple Pages)] in [Save as Type].
2. Scan the documents.
h
70
Recycling Used Cartridges
Canon has instituted a worldwide recycling
program for cartridges called “The Clean
Earth Campaign”. This program preserves
precious natural resources by utilizing
a variety of materials found in the used
cartridges that are of no further use, to
remanufacture new cartridges which, at
the same time, keeps the environment
cleaner by reducing landfill waste.
Complete details concerning this program
are enclosed in each Cartridge box.
U.S.A. PROGRAM
Packaging
Option A-1: Single Box Return
• Repackage the empty cartridge utilizing the wrapper and pulp
mould end-blocks from the new cartridge’s box.
• Place the empty cartridge in the box of your new cartridge.
Seal the box.
The Clean Earth Campaign
THE Canon CARTRIDGE RECYCLING
PROGRAM
The Canon Cartridge Recycling Program fulfills the first initiative
of Canon’s Clean Earth Campaign, which supports four critical
environmental areas:
• Recycling in the Workplace
• Conserving Environmental Resources
• Scientific Research and Education
• Encouraging Outdoors Appreciation
The remaining “Clean Earth” initiatives are supported in the
U.S. through sponsorships of the National Park Foundation, the
National Wildlife Federation, and The Nature Conservancy and in
Canada through donations to the World Wildlife Fund Canada and
The Nature Conservancy of Canada.
Since its inception, The Canon Cartridge Recycling Program has
collected huge amount of cartridges that otherwise would have
been discarded into landfills or similar facilities.
Instead, this rapidly growing program returns used cartridges to
the manufacturing process, thus conserving an array of resources.
Becoming a part of this worthwhile program is easy. When your
cartridge is of no further use, simply follow the instructions
detailed for U.S. or Canadian residents.
We appreciate your support of The Canon Cartridge Recycling
Program.
Working together we can make a significant contribution to a
cleaner planet.
• Cartridges collected through this program are not refilled.
• You are not entitled to a tax deduction or rebate for the return
of empty cartridges.
• This program may be modified or discontinued without notice.
Option B: Volume Box Return
We encourage you to use this option as a more efficient way to
ship cartridges.
• Place as many cartridges as possible into one box.
Carefully seal the box with tape;
or
• Call 1-800-OK-Canon to receive your free eight cartridge
collection box.
Option A-2: Multiple Box Return
We encourage you to use this option as a more efficient way to
ship cartridges.
• Complete Option A-1.
• Bundle multiple cartridge boxes together securely with tape.
Please be sure that the shipment does not exceed UPS
specifications.
Maximum weight = 70 lb. (31.8 kg)
Maximum length = 108” (2,743 mm)
Maximum girth (length + 2 x width + 2 x height) = 130” (3,302 mm)
.If your shipment exceeds the above limits, please call 1-800-OKCanon for special shipping information.
Please Note:
Do not send defective cartridges for replacement.
Defective cartridges under warranty should be exchanged
by an authorized dealer or service facility as provided in the
warranty.
Shipping
Apply the UPS authorized returning label provided in this guide.
Residents of Alaska and Hawaii: Do not use the UPS authorized
returning label. For Alaska and Hawaii Canon set up alternative
mail service with the U.S. Postal Service.
71
Please call 1-800-OK-Canon to receive U.S. Postal Service
merchandise returning label.
• Give the shipment to your UPS driver when you receive your
next regular delivery; (UPS may charge a fee for customers who
call UPS to pick up a cartridge shipment if they do not already
have a delivery scheduled.)
or
• Take the shipment to your local UPS receiving point.
Working to preserve endangered species is a long-standing Canon
interest.
To this end, for every cartridge collected, Canon Canada donates
$1, shared equally between World Wildlife Fund Canada and the
Nature Conservancy of Canada. This donation is utilized in Canada.
• For further information about The Clean Earth Campaign in
Canada, please call or write to Canon.
1-800-667-2666
Canon Canada Inc.
Corporate Customer Relations
6390 Dixie Road
Mississauga, ON L5T 1P7
Important Safety Instructions
CANADA PROGRAM-CANADA PROGRAMME
Option A: Single Box Return
• Repackage the empty cartridge utilizing the wrapper and pulp
mould end-blocks from the new cartridge’s box.
• Place the empty cartridge in the box of your new cartridge.
Seal the box.
• Apply the Canon Canada Inc./Canada Post label provided in this
brochure. Canon’s labels are specially marked so that Canon
pays the postage.
• Deposit your empty cartridge in any full size street mailbox or
take it to your local Canada Post outlet or franchise.
Option B: Volume Box Return (eight or more cartridges)
We encourage you to use this option as a more efficient way to
ship cartridges.
• Call 1-800-667-2666 to receive your free Canon collection box
kit.
• The collection box can accommodate eight individual cartridge
boxes.
• Place your eight individually packaged boxes of empty
cartridges into the Canon collection box. Seal the box.
• Apply the Canon Canada Inc./Canada Post label provided in this
brochure.
• Canon’s labels are specially marked so that Canon pays the
postage.
• Deliver to any local Canada Post outlet or franchise. Customers
who hold a Commercial pick-up agreement with Canada Post
may have their collection box picked up.
72
Please read the “Important Safety Instructions” in this manual and
in the e-Manual thoroughly before operating the machine.
As these instructions are intended to prevent injury to the user
and other persons or to prevent destruction of property, always
pay attention to these instructions and operational requirements.
Please note that you are responsible for all damages caused by
failure to follow the directions provided herein, using the
device for any purpose for which it was not intended, or repairs
or alterations made by anyone other than a Canon-approved
technician.
Installation
WARNING
• Do not install the machine near flammable substances, such as
alcohol-based products or paint thinners. If these substances
come into contact with the electrical parts inside the machine,
they could ignite these substances and cause a fire or increase
your risk of electric shock.
• Do not place necklaces and other metal objects or containers
filled with liquid on the machine. If foreign substances come
into contact with electrical parts inside the machine, this may
result in a fire or electrical shock.
If any of these substances falls into the machine, turn OFF the
power to the machine immediately and contact your local
Canon dealer.
CAUTION
• Do not install the machine in the following locations. Doing so
may result in personal injury, fire, or electrical shock.
– Unstable location
– A location subject to excessive vibrations
– A location that blocks the ventilation slots (too close to walls,
bed, shaggy rug, and other similar objects)
– A damp or dusty location
– A location exposed to direct sunlight or an outside place
– A location subject to high temperatures
– A location near open flames
– A location with poor ventilation
• Although ozone is produced by this machine when it is working,
the amount is too low to have any affect on the human body.
However, if you intend to use the machine for long periods of
time, ensure that the installation location is well ventilated.
• Do not connect unapproved cables to this machine. Doing so
may result in a fire or an electric shock.
Power Supply
Maintenance and Inspections
WARNING
• Do not use power cords other than the one provided, as this can
WARNING
• Turn OFF the machine and unplug the power cord from the
result in a fire or electrical shock.
• Do not modify or bend the power cord and do not pull on it
•
•
•
•
•
with great force. Do not place heavy objects on the power cord.
Damaging the power cord may result in a fire or an electric
shock.
Do not plug or unplug the power plug with wet hands, as this
can result in electrical shock.
Do not use extension cords or multi-plug power strips with this
machine. Doing so may result in a fire or electric shock.
Do not bundle up or tie up the power cord in a knot, as this can
result in a fire or electrical shock.
Insert the power plug completely into the AC power outlet.
Failure to do so can result in a fire or electrical shock.
Remove the power plug completely from the power outlet
during a thunder storm. Failure to do so can result in a fire,
electrical shock, or malfunction.
CAUTION
outlet before cleaning. Failure to do so may result in a fire or an
electric shock
• Unplug the power plug from the power outlet periodically and
clean the area around the base of the power plug’s metal pins
and the power outlet with a dry cloth to remove dust and grime.
When damp, accumulated dust may cause short circuiting or
fires.
• Use a damp, well wrung-out cloth to clean the machine.
Dampen cleaning cloths with water only. Do not use alcohol,
benzenes, paint thinners, or other flammable substances. If
these substances come into contact with electrical parts inside
the machine, this may result in a fire or electric shock.
• Check the power cord and plug regularly for damage. Check
the machine for rust, dents, scratches, cracks, or excessive heat
generation. Use of poorly-maintained equipment may result in a
fire or electric shock.
Consumables
• Use only a power supply that meets the voltage requirements
listed herein. Failure to do so may result in a fire or electric
shock.
• Do not obstruct the power outlet where this machine is
connected, so that you can unplug the power cord easily in an
emergency.
Handling
WARNING
• Do not disassemble or modify the machine. There are hightemperature and high-voltage components inside the machine
which may result in a fire or electrical shock.
• Do not allow children to touch or play with the power cord
and cables or internal or electrical parts. Doing so may result in
serious personal injury.
• Please contact an authorized Canon dealer if the machine
makes an unusual noise, emits an unusual smell, or emits smoke
or excessive heat. Continued use may result in a fire or electric
shock.
• Do not use flammable sprays near the machine. If flammable
substances come into contact with electrical parts inside the
machine, this may result in a fire or electric shock.
CAUTION
• For your safety, please unplug the power cord if the machine
will not be used for a long period of time.
• Use caution when opening and closing covers to avoid injury to
your hands.
• Keep hands and clothing away from the rollers in the output
area. If the rollers catch your hands or clothing, this may result in
personal injury.
• The inside of the machine and the output slot is very hot during
and immediately after use. Avoid contact with these areas to
prevent burns. Also, printed paper may be hot immediately after
being output, so use caution when handling it. Failure to do so
may result in burns.
WARNING
• Do not dispose of used toner cartridges in open flames. This
may cause an ignition, and result in burns or a fire.
• If you accidentally spill or scatter toner, carefully wipe up the
loose toner with a damp, soft cloth and avoid inhaling any toner
dust. Never use a vacuum cleaner to clean up loose toner. Doing
so may cause a malfunction in the vacuum cleaner or result in a
dust explosion due to static discharge.
CAUTION
• Keep the toner cartridges and other consumables out of the
reach of small children. If toner is ingested, consult a physician
or poison control center immediately.
• Do not attempt to disassemble the toner cartridge. The toner
may scatter and get into your eyes or mouth. If toner gets into
your eyes or mouth, wash them immediately with cold water
and immediately consult a physician.
• If toner spills from the toner cartridge, avoid inhaling it or
allowing it to come into contact with your skin. If the toner
comes into contact with your skin, wash immediately with soap
and cold water. If you inhale the toner or your skin becomes
irritated due to contact with the toner, consult a physician or
poison control center immediately.
Others
WARNING
• If you are using a cardiac pacemaker:
This machine generates a low level magnetic field. If you feel
any abnormalities in your body while using this machine, please
move away from the machine and consult your physician
immediately.
73
Legal Notices
Legal Limitations on the Usage of Your
Product and the Use of Images
Using your product to scan, print or otherwise reproduce certain
documents, and the use of such images as scanned, printed or
otherwise reproduced by your product, may be prohibited by law
and may result in criminal and/or civil liability.
A non-exhaustive list of these documents is set forth below. This
list is intended to be a guide only. If you are uncertain about
the legality of using your product to scan, print or otherwise
reproduce any particular document, and/or of the use of the
images scanned, printed or otherwise reproduced, you should
consult in advance with your legal advisor for guidance.
• Paper Money
• Money Orders
• Certificates of Deposit
• Postage Stamps (canceled or uncanceled)
• Identifying Badges or Insignias
• Selective Service or Draft Papers
• Checks or Drafts Issued by Governmental Agencies
• Motor Vehicle Licenses and Certificates of Title
• Travelers Checks
• Food Stamps
• Passports
• Immigration Papers
• Internal Revenue Stamps (canceled or uncanceled)
• Bonds or Other Certificates of Indebtedness
• Stock Certificates
• Copyrighted Works/Works of Art without Permission of
Copyright Owner
FCC (Federal Communications Commission)
imageCLASS D560: F165400
imageCLASS D530: F165400
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Use of shielded cable is required to comply with class B limits in
74
Subpart B of Part 15 of the FCC Rules. Do not make any changes or
modifications to the equipment unless otherwise specified in this
manual. If you make such changes or modifications, you could be
required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
TEL No. 1-800-OK-CANON
Laser Safety
This machine complies with 21 CFR Chapter 1 Subchapter J as
a Class 1 laser product under the U.S. Department of Health
and Human Services (DHHS) Radiation Performance Standard
according to the Radiation Control for Health and Safety Act of
1968. This means that the machine does not produce hazardous
radiation.
Since radiation emitted inside the machine is completely confined
within protective housings and external covers, the laser beam
cannot escape from the machine during any phase of user
operation.
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the
U.S. Food and Drug Administration implemented regulations
for laser products on August 2, 1976. These regulations apply to
laser products manufactured from August 1, 1976. Compliance is
mandatory for products marketed in the United States.
CAUTION
Use of controls, adjustments, or performance of procedures
other than those specified in this manual may result in hazardous
radiation exposure.
The label is attached to the laser scanner machine inside the
machine and is not in a user access area.
Memo
75
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON MARKETING JAPAN INC.
16-6, Konan 2-chome, Minato-ku, Tokyo 108-8011, Japan
CANON U.S.A., INC.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
CANON EUROPA N.V.
Bovenkerkerweg, 59-61, 1185 XB Amstelveen, The Netherlands
CANON CHINA CO. LTD.
15F Jinbao Building No.89, Jinbao Street, Dongcheng District, Beijing 100005, PRC
CANON SINGAPORE PTE LTD
1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632
CANON AUSTRALIA PTY LTD
1 Thomas Holt Drive, North Ryde, Sydney NSW 2113, Australia
CANON GLOBAL WORLDWIDE SITES
Date of Purchase
http://www.canon.com/
FT6-0302 (000)
Serial No.
XXXXXXXXXX
© CANON INC. 2012
PRINTED IN KOREA