Instruction manual | Canon 6371B049AA All in One Printer User Manual

C
INSTRUCTION MANUAL
E
Y
P
O
E
INSTRUCTION
MANUAL
Thank you for purchasing a Canon product.
The EOS-1D Mark IV is a top-of-the-line, high-performance EOS
DIGITAL SLR camera featuring a large, fine-detail CMOS sensor with
approx. 16.10 effective megapixels, Dual “DIGIC 4”, high-precision and
high-speed 45-point AF (39 cross-type points), approx. 10 fps
continuous shooting, Live View shooting, and Full HD (Full HighDefinition) movie shooting.
The camera is highly responsive to any shooting situation, provides
many features for demanding shoots, highly reliable even in harsh
environments, and compatible with a wide range of accessories to
expand shooting possibilities.
Take a Few Test Shots to Familiarize Yourself with the
Camera
With a digital camera, you can immediately view the image you have
captured. While reading this manual, take a few test shots and see how
they come out. You can then better understand the camera.
To avoid botched pictures and accidents, first read the Safety Warnings
(p.266,267) and Handling Precautions (p.12,13).
C
Y
P
O
Testing the Camera Before Use and Liability
After shooting, playback and check whether the image has been
properly recorded. If the camera or memory card is faulty and the
images cannot be recorded or downloaded to a computer, Canon
cannot be held liable for any loss or inconvenience caused.
Copyrights
Copyright laws in your country may prohibit the use of your recorded
images of people and certain subjects for anything but private
enjoyment. Also be aware that certain public performances, exhibitions,
etc., may prohibit photography even for private enjoyment.
Memory Cards
In this manual, “CF card” refers to CompactFlash cards and “SD card”
refers to SD/SDHC cards. “Card” refers to all memory cards used to
record images or movies. The camera does not come with a card for
recording images/movies. Please purchase it separately.
2
Item Check List
Before starting, check that all the following items have been included
with your camera. If anything is missing, contact your dealer.
Camera
(with eyecup, body cap,
and battery
compartment cap)
Wide Strap L6
Cable Protector
(with attaching
screw, p.26)
Battery Pack
LP-E4
(with protective cover)
Y
P
O
Battery Charger
LC-E4
Interface Cable
Stereo AV Cable
IFC-200U
AVC-DC400ST
C
EOS DIGITAL
Solution Disk
(Software)
Software
Instruction
Manual
(1) Instruction Manual (this booklet)
(2) Pocket Guide
Quick start guide to shooting.
(3) CD-ROM Guide
Guide to the provided software (EOS DIGITAL
Solution Disk) and Software Instruction Manuals.
* Be careful not to lose any of the above items.
3
Conventions Used in this Manual
Icons in this Manual
<6>
<5>
<9>
<0>
9, 8
: Indicates the Main Dial.
: Indicates the Quick Control Dial.
: Indicates the Multi-controller.
: Indicates the setting button.
: Indicates that the respective function remains active for 6
sec. or 16 sec. respectively after you let go of the button.
* In this manual, the icons and markings indicating the camera’s buttons, dials,
and settings correspond to the icons and markings on the camera and on the
LCD monitor.
3 : Indicates a function which can be changed by pressing the
<M> button and changing the setting.
Y
P
O
(p.**) : Reference page numbers for more information.
: Warning to prevent shooting problems.
: Supplemental information.
: Tip or advice for better shooting.
: Problem-solving advice.
Basic Assumptions
C
All operations explained in this manual assume that the power switch
is already set to <1> or <J> (p.34).
<5> operations explained in this manual assume that the power
switch is already set to <J>.
It is assumed that all the menu settings and Custom Functions are
set to the default.
It is assumed that a CF card <f> or SD/SDHC memory card <g> is
used.
For explanatory purposes, the instructions show the camera attached
with an EF50mm f/1.4 USM lens.
4
Chapters
Introduction
2
Camera basics.
1
2
3
4
5
6
7
8
9
10
11
Getting Started
27
Image Settings
Image-recording quality, ISO speed, Picture Style, etc.
Setting the AF and Drive Modes
Setting the AF mode, AF point, and drive mode.
Exposure Control
Y
P
O
Metering mode, shooting mode, flash, and other settings.
Live View shooting
Shoot photos while viewing the LCD monitor.
C
Shooting Movies
Shoot movies while viewing the LCD monitor.
Image Playback
Playing back photos and movies.
Sensor Cleaning
Auto cleaning, appending Dust Delete Data, and other procedures.
Printing Images
Printing with PictBridge and using DPOF for print orders.
Customizing the Camera
Setting Custom Functions (C.Fn), My Menu, etc.
Reference
55
93
103
125
141
155
183
189
203
241
5
Contents
Introduction
Item Check List.................................................................................................. 3
Conventions Used in this Manual ...................................................................... 4
Chapters ............................................................................................................ 5
Index to Features ............................................................................................ 10
Handling Precautions ...................................................................................... 12
Quick Start Guide ............................................................................................ 14
Nomenclature .................................................................................................. 16
1
Getting Started
27
Charging the Battery ....................................................................................... 28
Installing and Removing the Battery................................................................ 32
Using a Household Power Outlet (Sold separately) ........................................ 33
Turning on the Power ...................................................................................... 34
Installing and Removing the Card ................................................................... 36
Attaching and Detaching a Lens ..................................................................... 39
Basic Operation ............................................................................................... 40
Menu Operations ............................................................................................. 44
Menu Settings ................................................................................................. 46
Before You Start .............................................................................................. 49
Setting the Interface Language .................................................................... 49
Setting the Date and Time............................................................................ 49
Formatting the Card ..................................................................................... 50
Set the Power-off Time/Auto Power Off ....................................................... 52
Silencing the Beeper .................................................................................... 52
Card Reminder ............................................................................................. 52
Reverting the Camera to the Default Settings.............................................. 53
C
2
6
Image Settings
Y
P
O
55
Selecting the Card to Record or Playback....................................................... 56
Recording Method with Two Cards Inserted ................................................ 57
Setting the Image-recording Quality ................................................................ 59
Selecting the Image Size.............................................................................. 59
Setting the JPEG Quality (Compression Rate) ............................................ 63
Z: Setting the ISO Speed............................................................................ 64
A Selecting a Picture Style ......................................................................... 66
A Customizing a Picture Style .................................................................... 68
Contents
A Registering a Picture Style.......................................................................70
Setting the White Balance................................................................................72
O Custom White Balance..............................................................................73
P Setting the Color Temperature....................................................................78
u White Balance Correction ...........................................................................79
White Balance Auto Bracketing ....................................................................80
Auto Lighting Optimizer....................................................................................81
Lens Peripheral Illumination Correction ...........................................................82
Creating and Selecting a Folder.......................................................................84
Changing the File Name ..................................................................................86
File Numbering Methods ..................................................................................88
Setting Copyright Information...........................................................................90
Setting the Color Space ...................................................................................92
3
Setting the AF and Drive Modes
4
Exposure Control
Y
P
O
93
E: Selecting the AF Mode .............................................................................94
S Selecting the AF Point................................................................................97
When Autofocus Fails ....................................................................................100
MF: Manual Focusing .................................................................................100
R: Selecting the Drive Mode ..................................................................101
j Using the Self-timer...................................................................................102
C
103
q Selecting the Metering Mode ...................................................................104
d: Program AE ..............................................................................................106
s: Shutter-Priority AE ..................................................................................108
f: Aperture-Priority AE ...............................................................................110
Depth-of-Field Preview ...............................................................................111
a: Manual Exposure.....................................................................................112
O Exposure Compensation...........................................................................113
h Auto Exposure Bracketing (AEB) .............................................................114
A AE Lock ....................................................................................................115
Bulb Exposures ..............................................................................................116
2 Mirror Lockup ..........................................................................................118
D Flash Photography .....................................................................................119
Setting the Flash ............................................................................................121
7
Contents
5
6
Live View Shooting
125
z Preparing for Live View Shooting ............................................................ 126
z Live View Shooting .................................................................................. 127
Shooting Function Settings ........................................................................... 129
Menu Function Settings................................................................................. 130
Using AF to Focus ......................................................................................... 131
Focusing Manually......................................................................................... 138
Shooting Movies
141
k Preparing to Shoot Movies ...................................................................... 142
k Shooting Movies...................................................................................... 143
Autoexposure Shooting .............................................................................. 143
Manual Exposure Shooting ........................................................................ 144
Shooting Function Settings ........................................................................... 150
Menu Function Settings................................................................................. 151
7
Image Playback
C
8
Y
P
O
155
x Image Playback....................................................................................... 156
B Shooting Information Display .......................................................... 157
x Searching for Images Quickly ................................................................. 159
y Display Multiple Images on One Screen (Index display)....................... 159
I Jump through Images (Jump display) ................................................... 160
u/y Magnified View.................................................................................... 161
b Rotating the Image ................................................................................... 162
k Enjoying Movies ...................................................................................... 163
k Playing Movies ........................................................................................ 165
X Editing the Movie’s First and Last Scenes ............................................... 167
Slide Show (Auto Playback) .......................................................................... 168
Viewing the Images on TV............................................................................. 170
J Protecting Images .................................................................................... 172
K Recording and Playing Voice Memos ....................................................... 174
a Copying Images ....................................................................................... 176
L Erasing Images......................................................................................... 179
Changing Image Playback Settings............................................................... 180
Adjusting the LCD Monitor Brightness ....................................................... 180
Setting the Image Review Time ................................................................. 181
Auto Rotation of Vertical Images ................................................................ 182
Contents
8
Sensor Cleaning
9
Printing Images
10
183
f Automatic Sensor Cleaning ....................................................................184
Appending Dust Delete Data..........................................................................185
Manual Sensor Cleaning................................................................................187
189
Preparing to Print ...........................................................................................190
wPrinting......................................................................................................192
Trimming the Image ....................................................................................197
W Digital Print Order Format (DPOF) ...........................................................199
Direct Printing with DPOF ..............................................................................202
Customizing the Camera
C
11
203
Setting Custom Functions ..............................................................................204
Custom Functions ..........................................................................................205
Custom Function Settings ..............................................................................208
C.Fn I: Exposure .........................................................................................208
C.Fn II: Image/Flash exposure/Display .......................................................214
C.Fn III: Autofocus/Drive .............................................................................218
C.Fn IV: Operation/Others ..........................................................................227
Registering and Applying Custom Function Settings .....................................235
Registering My Menu .....................................................................................237
Saving and Loading Camera Settings............................................................238
Registering and Applying Basic Camera Settings..........................................240
Reference
Y
P
O
241
Function Availability Table .............................................................................242
System Map ...................................................................................................244
B Checking Camera Settings..................................................................246
Checking the Battery Information...................................................................247
Replacing the Date/Time Battery ...................................................................248
Troubleshooting Guide...................................................................................249
Error Codes....................................................................................................256
Specifications .................................................................................................257
Safety Warnings.............................................................................................266
Index ..............................................................................................................270
9
Index to Features
Power
Battery
• Charging
• Calibration
• Battery check
• Battery information
Power outlet
Auto power off
Î p.28
Î p.30
Î p.35
Î p.247
Î p.33
Î p.52
Lens
Attaching/Detaching
Î p.39
Basic Settings
(Menu Functions)
Menus
Language
Date/Time
LCD brightness adjustment
Beeper
Release shutter
without card
Clear camera settings
Î p.46
Î p.49
Î p.49
Î p.180
Î p.52
C
Î p.52
Î p.53
Recording Images
Format
Select card
Recording to a card
Create/select a folder
File name
File No.
Î p.50
Î p.56
Î p.57
Î p.84
Î p.86
Î p.88
Image Quality
Image size
JPEG (Compression rate)
ISO speed
• ISO speed expansion
Picture Style
Color space
10
Î p.59
Î p.63
Î p.64
Î p.208
Î p.66
Î p.92
Image improvement features
• Auto Lighting Optimizer Î p.81
• Lens peripheral illumination
correction
Î p.82
• Noise reduction
for long exposures
Î p.214
• Noise reduction
for high ISO speeds
Î p.214
• Highlight tone priority
Î p.215
White balance
White balance setting
Î p.72
Custom WB
Î p.73
Color temperature setting Î p.78
White balance correction Î p.79
WB bracketing
Î p.80
Y
P
O
Viewfinder
Dioptric adjustment
Î p.40
Eyepiece shutter
Î p.117
Changing the focusing screen Î p.232
AF
AF mode
Î p.94
AF point selection
Î p.97
AF Custom Functions
• Number of AF points
Î p.223
• AF point expansion
Î p.222
• AI Servo tracking sensitivity Î p.218
• AI Servo AF tracking method Î p.219
• AF Servo operation
Î p.218
• Vertical/Horizontal AF point Î p.226
• AF fine adjustment
Î p.221
Manual focusing
Î p.100
Metering
Metering mode
Multi-spot metering
Î p.104
Î p.105
Index to Features
Drive
Drive modes
Maximum burst
Self-timer
Image playback
Î p.101
Î p.62
Î p.102
Shooting
Program AE
Shutter-priority AE
Aperture-priority AE
Manual exposure
Bulb
Mirror lockup
Depth-of-field preview
Î p.106
Î p.108
Î p.110
Î p.112
Î p.116
Î p.118
Î p.111
Exposure adjustment
Exposure compensation
AEB
AE lock
Safety shift
Flash
Y
P
O
Î p.113
Î p.114
Î p.115
Î p.210
C
External flash
Î p.119
Flash control
Î p.121
Flash Custom Functions Î p.124
Live View shooting
Still photo shooting
• AF
• Manual focusing
• Exposure simulation
• Grid display
Î p.126
Î p.131
Î p.138
Î p.130
Î p.130
Î p.181
Î p.156
Î p.159
Î p.160
Î p.161
Î p.162
Î p.168
Î p.165
Î p.167
Î p.170
Î p.172
Î p.174
Î p.176
Î p.179
Printing
PictBridge
Print Order (DPOF)
Î p.190
Î p.199
Customization
Custom Functions (C.Fn) Î p.204
Custom Function setting
registration
Î p.235
My Menu
Î p.237
Saving camera settings Î p.238
Registering basic camera
settings
Î p.240
Sensor cleaning
Movie shooting
Movie shooting
• Autoexposure shooting
• Manual exposure shooting
• Recording size
Image review time
Single image display
Index display
Image browsing
(Jump display)
Magnified view
Image rotate
Slide show
Movie playback
Editing out movie
first/last scene
Viewing the images
on TV
Protect
Voice memo
Copying images
Erase
Î p.142
Î p.143
Î p.144
Î p.151
Sensor cleaning
Î p.184
Append Dust Delete Data Î p.185
11
Handling Precautions
Camera Care
This camera is a precision instrument. Do not drop it or subject it to physical
shock.
The camera is not waterproof and cannot be used underwater. If you
accidentally drop the camera into water, promptly consult your nearest
Canon Service Center. Wipe off any water droplets with a dry cloth. If the
camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Never leave the camera near anything having a strong magnetic field such
as a magnet or electric motor. Also avoid using or leaving the camera near
anything emitting strong radio waves such as a large antenna. Strong
magnetic fields can cause camera misoperation or destroy image data.
Do not leave the camera in excessive heat such as in a car in direct sunlight.
High temperatures can cause the camera to malfunction.
The camera contains precision electronic circuitry. Never attempt to
disassemble the camera yourself.
Use a blower to blow away dust on the lens, viewfinder, reflex mirror, and
focusing screen. Do not use cleaners that contain organic solvents to clean
the camera body or lens. For stubborn dirt, take the camera to the nearest
Canon Service Center.
Do not touch the camera’s electrical contacts with your fingers. This is to
prevent the contacts from corroding. Corroded contacts can cause camera
misoperation.
If the camera is suddenly brought in from the cold into a warm room,
condensation may form on the camera and internal parts. To prevent
condensation, first put the camera in a sealed plastic bag and let it adjust to
the warmer temperature before taking it out of the bag.
If condensation forms on the camera, do not use the camera. This is to avoid
damaging the camera. If there is condensation, remove the lens, card and
battery from the camera, and wait until the condensation has evaporated
before using the camera.
If the camera will not be used for an extended period, remove the battery
and store the camera in a cool, dry, well-ventilated location. Even while the
camera is in storage, press the shutter button a few times once in a while to
check that the camera is still working.
Avoid storing the camera where there are corrosive chemicals such as a
darkroom or chemical lab.
If the camera has not been used for an extended period, test all its functions
before using it. If you have not used the camera for some time or if there is
an important shoot coming up, have the camera checked by your Canon
dealer or check the camera yourself and make sure it is working properly.
C
12
Y
P
O
Handling Precautions
LCD Panel and LCD Monitor
Although the LCD monitor is manufactured with very high precision
technology with over 99.99% effective pixels, there might be a few dead
pixels among the remaining 0.01% or less pixels. Dead pixels displaying
only black or red, etc., are not a malfunction. They do not affect the images
recorded.
If the LCD monitor is left on for a prolonged period, screen burn-in may occur
where you see remnants of what was displayed. However, this is only
temporary and will disappear when the camera is left unused for a few days.
In low or high temperatures, the LCD monitor display may seem slow or it
might look black. It will return to normal at room temperature.
Cards
To protect the card and its recorded data, note the following:
Do not drop, bend, or wet the card. Do not subject it to excessive force,
physical shock, or vibration.
Do not store or use the card near anything having a strong magnetic field
such as a TV set, speakers, or magnet. Also avoid places prone to having
static electricity.
Do not leave the card in direct sunlight or near a heat source.
Store the card in a case.
Do not store the card in hot, dusty, or humid locations.
Lens
C
Y
P
O
After detaching the lens from the camera, attach the
lens caps or put down the lens with the rear end up to
avoid scratching the lens surface and electrical
contacts.
Contacts
Cautions During Prolonged Use
If you use continuous shooting, Live View shooting, or movie shooting for a
prolonged period, the camera may become hot. Although this is not a
malfunction, holding the hot camera for a long period can cause slight skin
burns.
13
Quick Start Guide
1
Install the battery. (p.32)
2
Attach the lens. (p.39)
3
Set the lens focus mode switch
to <AF>. (p.39)
4
5
14
Take off the cap and insert a fullycharged battery. To charge the battery,
see page 28.
Align it with the red dot.
C
Y
P
O
Insert the card. (p.36)
The left slot is for a CF card, and the
right slot is for an SD card.
Set the power switch to <1>.
(p.34)
Quick Start Guide
Set the camera to the default
settings. (p.53)
6
On the menu screen under the [7] tab,
select [Clear all camera settings].
• Press the <M> button and turn
the <6> or <5> dial to select it,
then press <0>.
• The <d> Program AE mode will take
effect.
Focus the subject. (p.41)
Aim the Area AF frame over the
subject. Press the shutter button
halfway, and the camera will focus the
subject.
7
8
9
C
Y
P
O
Take the picture. (p.41)
Press the shutter button completely to
take the picture.
View the image. (p.181)
The captured image will be displayed
for approx. 2 sec. on the LCD monitor.
To display the image again, press the
<x> button (p.156).
Shooting will be possible with either a CF card or SD card in the
camera.
To view the images captured so far, see “Image Playback” (p.156).
To delete an image, see “Erasing Images” (p.179).
15
Nomenclature
Lens mount index
(p.39)
Mirror (p.118,187)
Movie microphone
(p.143)
Self-timer lamp
(p.102)
Shutter button
(p.41)
Lens lock pin
Lens release
button (p.39)
Grip
Depth-of-field
preview button
(p.111)
Vertical-grip on/off
switch (p.43)
<I> Vertical-grip
FE lock/Multi-spot metering/
Movie shooting button
(p.43,119/105/143)
C
Y
P
O
Lens
mount
Contacts (p.13)
Tripod socket
Body number
Vertical-grip Main Dial
(p.43,42)
Hand strap mount
(p.26)
Vertical-grip shutter button
(p.43,41)
16
Body cap (p.39)
Nomenclature
<O> Exposure compensation/
Aperture button (p.113/112)
<Z> ISO speed
setting button (p.64,144)
<U> LCD panel illumination
button (p.116)
<I> FE lock/
Multi-spot metering/
Movie shooting button
(p.119/105/143)
Hot shoe
Flash-sync contacts
<6> Main Dial
(p.42)
Eyecup
(p.40)
Strap mount
(p.26)
C
LCD monitor
(p.44,180)
Y
P
O
<0> Setting/
Live View shooting
button (p.44/126)
<5> Quick
Control Dial (p.43)
<9> Multi-controller
(p.42)
Power/Quick Control Dial
switch (p.34)
<p> Vertical-grip
AF start button
(p.43,41,95,96,127,147)
<A/y> Vertical-grip
AE lock/Reduce button
(p.43,115/161,197)
<S/u> Vertical-grip
AF point selection/
Magnify button
(p.43,97/161,197)
17
Nomenclature
<Q> Metering mode
selection/Flash exposure
compensation button
(p.104/119)
<V> Focal plane mark
Top LCD panel (p.21)
<p>
AF start button
(p.41,95,96,127,147)
<W> Shooting
mode selection button
(p.106,127,143,144)
<A/y> AE lock/
Reduce button
(p.115/161,197)
<o>
AF mode selection/
Drive mode selection
button (p.94/101)
<S/u>
AF point selection/
Magnify button
(p.97/161,197)
<Y> AEB setting
button (p.114)
Wireless File
Transmitter
mounting hole
C
Y
P
O
Eyepiece
shutter lever
(p.117)
Speaker (p.165,175)
Viewfinder eyepiece
Battery release
handle (p.32,33)
Battery (p.28)
Dioptric adjustment knob (p.40)
System extension
terminal
If you use Wireless File Transmitter WFT-E2/E2A connected to the system
extension terminal, update the WFT-E2/E2A’s firmware to Version 2.0.0 or
higher.
18
Nomenclature
<M> Menu
button (p.44)
<B> Info/Trimming
orientation button
(p.128,148,156,246/197)
CF card slot
(p.36)
Strap mount
(p.26)
SD card slot
(p.36)
Card slot cover
(p.36)
Terminal
cover
<x>
Playback
button
(p.156)
Rear LCD panel
(p.22)
C
Y
P
O
CF card eject
button (p.38)
Access lamp
(p.38)
Card slot cover
release handle (p.36)
Voice memo microphone (p.174)
<L> Erase button
(p.179)
<H> Protect/Voice memo button
(p.172/174)/
<A> Picture Style selection button (p.66)
<B> Function button (p.56,59,72,78)
<D> PC terminal (p.120)
<F> Remote control terminal (N3 type) (p.117)
<Y> External microphone IN terminal (p.152)
<q/C>
Audio/video OUT/
Digital terminal (p.170/190)
Battery compartment
cap (p.32)
<Z> HDMI mini OUT terminal (p.171)
19
Nomenclature
Viewfinder Information
Center spot metering circle
Area AF frame
AF point
: Cross-type
AF points
: AF points
Focusing screen
Exposure
level indicator
Max. burst
<i> ISO speed
icon
<p>
JPEG icon
<q> Metering mode
Y
P
O
<1>
RAW icon
<z> Battery check
<q> Manual exposure
<w> AE lock
AEB in-progress
Multi-spot metering
<D> Flash-ready
Improper FE lock warning
<e> High-speed sync
(FP flash)
<r> FE lock
FEB in-progress
<o> Focus confirmation light
ISO speed
C
<H> Highlight tone priority
Shots remaining
Recording media full (Full)
AF point selection mode
( [ -- -- ] AF, SEL [ ], SEL AF)
Recording media indicator (Card *)
AF point registration
( [ -- -- ] HP, SEL [ ], SEL HP)
Shutter speed
Bulb (buLb)
FE lock
Busy (buSY)
Aperture
Standard exposure index
Exposure level scale
: 1 stop
: 1/3 stop
Overexposure
Flash
overexposure
Exposure level
Flash exposure
level
<y> Exposure compensation
Flash exposure compensation
<u> White balance correction
The display will show only the settings currently applied.
20
Flash underexposure
Underexposure
Nomenclature
Top LCD Panel
Shutter speed
Bulb (buLb)
Bulb exposure time (min.:sec.)
FE lock (FEL)
Busy (buSY)
Error (Err)
Sensor cleaning (CLn)
Aperture
AEB amount
Dust Delete Data acquisition (- -)
AF point selection mode
( [ -- -- ] AF, SEL [ ], SEL AF)
Recording media indicator (Card *)
AF point registration
( [ -- -- ] HP, SEL [ ], SEL HP)
ISO speed
Dust Delete Data acquisition (- - - -)
Shots remaining
Self-timer countdown
Bulb exposure time (Hours)
Recording media full (Full)
Error code
Remaining images to record
Shooting mode
d : Program AE
f : Aperture-priority AE
a : Manual exposure
s : Shutter-priority AE
ISO speed
Highlight
tone priority
C
Metering mode
q Evaluative
metering
w Partial metering
r Spot metering
e Center-weighted
average metering
Battery check
Y
P
O
Exposure level
scale
Drive mode
u Single shooting
o High-speed
continuous shooting
p Low-speed
continuous shooting
k 10-sec. self-timer
l 2-sec. self-timer
6
Silent single shooting
bn
zxcm
Flash exposure compensation
AEB
Mirror lockup
AF mode
X:
One-Shot AF
Z:
AI Servo AF
Exposure level indicator
Exposure compensation amount
AEB range
Flash exposure compensation amount
The display will show only the settings currently applied.
21
Nomenclature
Rear LCD Panel
External media selection
icon*3
External media connection icon*3
White balance correction
SD card indicator
Monochrome shooting
White balance
Q Auto
W Daylight
E Shade
R Cloudy
Y Tungsten light
U White fluorescent light
I Flash
O Custom
P Color temperature
SD card
selection icon
CF card
indicator
CF card
selection
icon
Image size
3 Large
4 Medium1
5 Medium2
6 Small
1 RAW
K1 Medium RAW
61 Small RAW
C
Y
P
O
File No.
Custom white balance
number
Color temperature
Personal white balance
number
Folder number
Recording media indicator
(Full, Err)
Wired LAN connection*1
Wireless LAN connection*1
Custom white balance
acquisition display ([ * ])
Data transfer icon*2
*1: Displayed when Wireless File Transmitter WFT-E2 II A/B/C/D or WFT-E2/E2A is used.
*2: Displayed when the camera is connected to a personal computer.
*3: Displayed when the WFT-E2 II A/B/C/D or WFT-E2/E2A and external media are used.
The display will show only the settings currently applied.
22
Nomenclature
Shooting Settings Display
Aperture
<A> AE lock
ISO speed
<D> Flash-ready
<e> High-speed sync
(FP flash)
<r> FE lock/
FEB in-progress
Shutter speed
BULB: Bulb
Shooting mode
d : Program AE
f : Aperture-priority
AE
a : Manual exposure
s : Shutter-priority
AE
Exposure level
indicator
<H> Highlight
tone priority
Metering mode
q Evaluative
metering
w Partial metering
r Spot metering
e Center-weighted
average metering
<y> Flash exposure
compensation
Drive mode
u Single shooting
o High-speed
continuous shooting
p Low-speed
continuous shooting
k 10-sec. self-timer
l 2-sec. self-timer
6
Silent single shooting
Battery check
C
bn
zxcm
<2> Mirror lockup
<Y> AEB
Y
P
O
Shots remaining
<o> Focus confirmation
light
AF mode
X: One-Shot AF
Z: AI Servo AF
ISO speed
Picture Style
P Standard
Q Portrait
R Landscape
S Neutral
U Faithful
V Monochrome
W User Def. 1-3
Max. burst
The display will show only the settings currently applied.
By default, when the power is turned on, pressing the <B> button
while nothing is displayed on the LCD monitor will display the shooting
settings screen. To turn off the display, press the button again.
Regarding the shooting settings display, see [8C.Fn II -10: INFO.
button when shooting] on page 217.
23
Nomenclature
Battery Pack LP-E4
Lock lever
Contacts
Battery release handle
Handle end
Contact end
C
24
Protective cover
Y
P
O
Nomenclature
Battery Charger LC-E4
Charger for Battery Pack LP-E4 (p.28).
Charge level/
Calibration (Discharge) status indicator/
Performance check lamp
Charge lamp
Calibration/Performance
check button
Battery pack
slot
Car battery cable socket
Power cord socket
C
Protective
covers (2)
Y
P
O
Power cord
25
Nomenclature
Attaching the Neck Strap and Hand Strap
Using the Cable Protector
Strap
Cable Protector
Y
P
O
Interface cable
HDMI cable (Sold separately)
System extension terminal
C
Hand strap (Sold separately)
1
2
3
Attaching the Neck Strap
4
5
6
After attaching the strap, pull it at the buckle to take up the slack and to
make sure it does not loosen.
26
Getting Started
Y
P
O
This chapter explains preliminary steps and basic
camera operations.
C
Minimizing Dust
When changing lenses, do it quickly in a place with minimal dust.
When storing the camera without a lens attached, be sure to
attach the body cap to the camera.
Remove dust on the body cap before attaching it.
27
Charging the Battery
1
Connect the charger to a power
outlet.
Connect the power plug to a power
outlet, and connect the power cord to
the charger.
When no battery is attached, all the
indicator lamps will be off.
the protective covers
2 Remove
from the charger and battery.
Remove the protective cover on the
charger by sliding it out.
C
Y
P
O
the battery.
3 Recharge
Slide the battery into the charger’s
slot as shown by the arrow, and make
sure it is securely attached.
You can attach the battery to slot A or B.
X The battery will start recharging and
the green status lamp will blink.
X When the battery is fully charged, all
three Charge level indicators will light
(50%/80%/100%).
It takes approx. 2 hours to fully recharge
a completely exhausted battery.
The time required to recharge the battery
depends on the ambient temperature
and battery’s charge level.
28
Charging the Battery
Tips for Using the Battery and Charger
Recharge the battery on the day before or on the day it is to be used.
Even during storage, a charged battery will gradually discharge and
lose its power.
After recharging the battery, detach it and unplug the power
cord from the power outlet.
When not using the battery and charger, attach the protective covers.
Use the battery in an ambient temperature range of 0°C - 45°C /
32°F - 113°F.
To attain best battery performance, an ambient temperature of 10°C 30°C / 50°F - 86°F is recommended. In cold locations such as snowy
areas, battery performance and operation time may temporarily decrease.
When not using the camera, remove the battery.
If the battery is left in the camera for a prolonged period, a small
amount of power current is released, resulting in excess discharge
and shorter battery life. Take out the battery from the camera and
attach the protective cover before storing. Storing the battery after it
is fully charged can lower the battery’s performance.
C
Y
P
O
The battery charger can also be used in foreign countries.
The battery charger is compatible with a 100 V AC to 240 V AC 50/60 Hz
power source. If necessary, attach a commercially-available plug adapter for
the respective country or region. Do not attach any portable voltage
transformer to the battery charger. Doing so can damage the battery charger.
Check the battery performance.
While the battery is recharging, press the
<PERFORMANCE> button to check the battery’s
performance level indicated by the Charge level indicator.
(Green) : Battery performance is fine.
(Green) : Battery’s recharge performance is slightly degraded.
(Red) : Purchasing a new battery is recommended.
If the battery becomes exhausted quickly even after being fully
charged, the battery has reached the end of its service life.
Check the battery’s recharge performance (p.247) and purchase a new battery.
29
Charging the Battery
Use the Car’s Cigarette Lighter Socket to Recharge the Battery
With Car Battery Cable CB-570 (sold separately), you can connect the
charger’s car battery cable socket (<DC IN> terminal) to your car’s
cigarette lighter socket.
When recharging the battery this way, be sure that the car’s engine
is running. If the car engine is off, disconnect the car battery cable
from the cigarette lighter socket. If you leave the car battery cable
connected to the cigarette lighter socket, it may drain the car battery.
Do not use a transformer for the car with the battery charger.
Battery charging from a car battery is possible only with a 12 V DC
or 24 V DC car battery in a minus-grounded car. The shape or
dimensions of the cigarette lighter socket in certain cars might not be
compatible with the car battery cable.
Y
P
O
The <CAL/CHARGE> Lamp Blinks in Red
This indicates that you should calibrate the battery so that the correct
battery level is detected and the camera’s battery level indicator can
display the correct battery level. Calibration is not a required
operation. If you want to just recharge the battery, you can let the
battery start recharging automatically after approx. 10 sec. If you
want to do the calibration, press the <CALIBRATE> button while the
<CAL/CHARGE> lamp is blinking in red. The Charge level indicator
will blink in red and the calibration (power discharge) will start.
After the calibration is completed, the battery will start recharging
automatically. Note that the less depleted the battery, the longer the
calibration will take. The <2h>, <4h>, and <10h> figures on the side of
the Charge level indicator respectively indicate the approximate number
of hours it will take to complete the calibration (power discharge). If the
<10h> indicator blinks in red, it will take approx. 10 hours.
After the calibration is completed and the battery is totally drained, it
will take a further 2 hours to recharge the battery fully. If you want to
stop the calibration before it is completed and start recharging the
battery, remove the battery from the charger and attach it again.
C
30
Charging the Battery
All Three Charge Level Indicators Blink
If all three Charge level indicators blink in green, it means that the
battery’s internal temperature is not within 0°C - 40°C / 32°F - 104°F.
The battery will start recharging when the internal temperature is
within 0°C - 40°C / 32°F - 104°F.
If all the Calibration (discharge) status indicators blink in red or if all
the lamps blink in red and green (including the <CAL/CHARGE>
lamp), remove the battery from the charger and take it to your dealer
or to nearest Canon Service Center.
Also, if a battery other than Battery Pack LP-E4 is attached to the
charger, the lamps will blink in red and green (including the <CAL/
CHARGE> lamp) and the battery cannot be recharged.
C
Y
P
O
The charger cannot charge any battery other than Battery Pack LP-E4.
Battery Pack LP-E4 is dedicated to Canon products only. Using it with a
non-Canon battery charger or product may result in malfunction or
accidents for which Canon cannot be held liable.
When two battery packs are attached to the charger, the battery attached
first will be charged first, then the other battery will be charged.
Although one battery can be recharged and another calibrated at the same
time, two batteries cannot be recharged or calibrated at the same time.
For battery calibration, it is best to do it after the battery is nearly
exhausted. If you do the calibration with a fully charged battery, it will
take approx. 12 hours to complete the calibration and the battery
recharging (approx. 10 hours to discharge, and approx. 2 hours to fully
recharge).
31
Installing and Removing the Battery
Installing the Battery
Insert a fully charged Battery Pack LP-E4 into the camera.
1
Remove the battery compartment
cap.
the battery.
2 Insert
Insert the battery firmly all the way,
and turn the release handle as shown
by the arrow.
Removing the Battery
C
1
Y
P
O
Flip out the battery release
handle and turn it as shown by
the arrow.
the battery.
2 PullToout
prevent shorting, be sure to attach
the protective cover (p.24) to the
battery.
When not using the camera, attach
the battery compartment cap (p.19).
If the battery’s rubber lining (to repel water) is not clean, use
a moist cotton swab to wipe it clean.
Rubber lining
32
Using a Household Power Outlet (Sold separately)
With AC Adapter Kit ACK-E4 (sold separately), you can connect the
camera to a household power outlet and not worry about the battery
level.
1
Connect the DC Coupler’s plug.
Connect the DC Coupler’s plug to the
AC adapter’s DC terminal.
the power cord.
2 Connect
Connect the power plug to the power
outlet, then connect the power cord to
the AC adapter.
Y
P
O
the DC Coupler.
3 Insert
Insert the DC Coupler firmly all the
C
way, and turn the release handle as
shown by the arrow.
After using the camera, unplug the
power plug from the power outlet.
The DC Coupler is not water-resistant, so do not get it wet when using it
outdoors.
Do not connect or disconnect the power cord or DC Coupler while the
camera’s power switch is set to <1> or <J>.
33
Turning on the Power
Power/Quick Control Dial Switch
<2> : The camera is turned off and
does not operate. Set to this
position when not using the
camera.
<1> : The camera turns on.
<J>
: The camera and <5> operate
(p.43).
About the Automatic Self-Cleaning Sensor
Whenever you set the power switch to
<1/J> or <2>, the sensor
cleaning will be executed automatically.
During the sensor cleaning, the LCD
monitor will display <f>.
Even during the sensor cleaning, you
can still shoot by pressing the shutter
button halfway (p.41) to stop the
sensor cleaning and take a picture.
If you turn on/off the power switch
<1/J>/<2> at a short interval,
the <f> icon might not be displayed.
This is normal and not a problem.
C
Y
P
O
About Auto Power Off
To save battery power, the camera turns off automatically after
approx. 1 minute of non-operation. To turn on the camera again, just
press the shutter button halfway (p.41).
You can change the auto power-off time with the menu’s [5 Auto
power off] setting (p.52).
If you set the power switch to <2> while an image is being recorded to
the card, [Recording ...] will be displayed and the power will turn off after
the card finishes recording the image.
34
Turning on the Power
Checking the Battery Level
When the power switch is set to <1>, the battery level will be
indicated in one of six levels:
Icon
Level
(%)
Indication
z 100 - 70 Sufficient battery level
x
69 - 50 Battery level exceeds 50%
c
49 - 20 Battery level below 50%
m
19 - 10 Battery level is low
b
n
Battery Life
9-1
Battery will be exhausted soon
Y
P
O
0
Recharge the battery
Temperature
At 23°C / 73°F
At 0°C / 32°F
Possible shots
Approx. 1500
Approx. 1200
C
The figures above are based on a fully-charged Battery Pack LP-E4, no Live View
shooting, and CIPA (Camera & Imaging Products Association) testing standards.
The number of possible shots will decrease with any of the following
operations:
• Pressing the shutter button halfway for a prolonged period.
• Often activating only the AF without taking a picture.
• Using the LCD monitor often.
• Using the lens Image Stabilizer.
The actual number of shots may be fewer than indicated above
depending on the shooting conditions.
The lens operation is powered by the camera’s battery. Depending on
the lens used, the number of possible shots may be lower.
For battery life with Live View shooting, see page 129.
See the [6 Battery info.] menu to further check the battery’s condition
(p.247).
35
Installing and Removing the Card
The camera can use a CF card and SD card. Images can be recorded
when at least one card is installed in the camera.
If both card slots have a card, you can select which card to record
images with or record the same images simultaneously on both cards
(p.56, 57).
If you use an SD card, be sure the card’s write protect switch
is set upward to enable writing/erasing.
Installing the Card
1
Open the cover.
Flip out and turn the cover release
handle as shown by the arrow.
Y
P
O
the card.
2 Insert
The left slot is for a CF card, and the
right slot is for an SD card.
As shown in the illustration, face
the CF card’s label side toward you
and insert the end with the small
holes into the camera.
If the card is inserted in the wrong
way, it may damage the camera.
X The CF card eject button will stick
out.
With the SD card’s label facing you,
push in the card until it clicks in place.
C
Write protect switch
the cover.
3 Close
Press the cover until it snaps shut.
36
Installing and Removing the Card
Shots remaining
Card selection icon
CF card indicator
the power switch to <1>.
4 Set
X The number of remaining shots will
be displayed on the top LCD panel
and in the viewfinder.
X The rear LCD panel will indicate
which card(s) has been installed. The
images will be recorded to the card
with the < > arrow next to the
respective card’s indicator.
SD card indicator
C
Y
P
O
SDHC memory cards can be used with the camera.
Although the thickness is different between the two types of
CF (CompactFlash) cards, either one can be inserted into the
camera.
Ultra DMA (UDMA) CF cards and hard disk-type cards can also be used
with the camera. UDMA CF cards enable faster data writing.
The number of possible shots varies depending on the card’s capacity,
image-recording quality, ISO speed, etc.
Setting the [2 Release shutter without card] menu option to [Disable]
will prevent you from forgetting to install a card (p.52).
37
Installing and Removing the Card
Removing the Card
1
Open the cover.
Set the power switch to <2>.
Make sure the access lamp is off,
then open the cover.
the card.
2 Remove
To remove the CF card, push the
eject button.
To remove the SD card, push it in
gently and release it. Then pull it out.
Close the cover.
The access lamp lights or blinks while data is being transferred to
the card and when data is being recorded, read, or erased on the
card. While the access lamp is lit or blinking, never do any of the
following. Doing so may damage the image data. It may also
damage the card or camera.
• Opening the card slot cover.
• Removing the battery.
• Shaking or banging the camera around.
If the card already contains recorded images, the image number might
not start from 0001 (p.88).
If a card-related error message is displayed on the LCD monitor, remove
and reinstall the card. If the error persists, use a different card.
If you can transfer all the images in the card to a computer, transfer all
the images and then format the card with the camera (p.50). The card
may then return to normal.
When holding a hard disk-type card, always hold its sides. You may
damage the card by holding its flat surfaces. Hard disk-type cards are
more vulnerable to vibration and physical shock. If you use such a card,
be careful not to subject the camera to vibration or physical shock
especially while recording or displaying images.
Do not touch the SD card’s contacts with your fingers or metal objects.
C
Y
P
O
Even with the power switch set to <2>, when you insert or remove a
card, the access lamp might blink.
38
Attaching and Detaching a Lens
Attaching a Lens
1
Remove the caps.
Remove the rear lens cap and the
body cap by turning them as shown
by the arrow.
the lens.
2 Attach
Align the red dots on the lens and
camera and turn the lens as shown
by the arrow until it clicks in place.
Y
P
C4 O
the lens, set the focus mode
3 On
switch to <f> (autofocus).
If it is set to <g> (manual focus),
autofocus will not operate.
Remove the front lens cap.
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by
the arrow.
Turn the lens until it stops, then
detach it.
Attach the rear lens cap to the
detached lens.
Do not look at the sun directly through any lens. Doing so may cause
loss of vision.
The camera cannot be used with EF-S lenses.
39
Basic Operation
Adjusting the Viewfinder Clarity
1
Remove the eyecup.
While grasping both sides of the
eyecup, slide it upward to remove.
the adjustment.
2 Make
Turn the knob to the right or left until
the AF points or the center spot
metering circle (p.20) looks sharp in
the viewfinder.
Attach the eyecup.
Y
P
O
If the camera’s dioptric adjustment still cannot provide a sharp viewfinder
image, using Dioptric Adjustment Lens Eg (sold separately) is recommended.
Holding the Camera
Horizontal
shooting
C
To obtain sharp images, hold the
camera still to minimize camera
shake.
Vertical
shooting
1. Wrap your right hand around the camera grip firmly.
2. Hold the lens bottom with your left hand.
3. Press the shutter button lightly with your right hand’s index finger.
4. Press your arms and elbows lightly against the front of your body.
5. Press the camera against your face and look through the viewfinder.
6. To maintain a stable stance, place one foot in front of the other.
For shooting while looking at the LCD monitor, see page 125.
40
Basic Operation
Shutter Button
The shutter button has two steps. You can press the shutter button
halfway. Then you can further press the shutter button completely.
Pressing halfway
This activates autofocusing and
automatic exposure metering that sets
the shutter speed and aperture.
The exposure setting (shutter speed and
aperture) is displayed on the top LCD
panel and in the viewfinder (9).
Pressing completely
This releases the shutter and takes the
picture.
C
Y
P
O
Preventing Camera Shake
Camera movement during the moment of exposure is called camera
shake. Camera shake can cause blurred pictures. To prevent camera
shake, note the following:
• Hold and steady the camera as shown on the previous page.
• Press the shutter button halfway to autofocus, then press the
shutter button completely.
Pressing the <p> button will be the same as pressing the shutter
button halfway.
If you press the shutter button completely without pressing it halfway first
or if you press the shutter button halfway and then press it completely
immediately, the camera will take a moment before it takes the picture.
Even during the menu display, image playback, and image recording,
you can instantly go back to shooting-ready by pressing the shutter
button halfway.
41
Basic Operation
6 Making Selections with the Main Dial
(1) After pressing a button, turn the
<6> dial.
When you press a button, its function
remains selected for 6 seconds (9).
During this time, you can turn the <6>
dial to set the desired setting. When the
function selection turns off or if you press
the shutter button halfway, the camera
will be ready to shoot.
Use the dial to select or set the
shooting mode, AF mode, metering
mode, AF point, ISO speed, Picture
Style, exposure compensation when
the <O> button is pressed, card, etc.
Y
P
O
(2) Turn the <6> dial only.
C
While looking at the viewfinder or top LCD panel,
turn the <6> dial to set the desired setting.
Use this dial to set the shutter speed,
aperture, etc.
9 Operating the Multi-controller
The <9> consists of an eight-direction
key and a button at the center.
Use it to select the AF point, correct
the white balance, move the AF frame
or the magnifying frame during Live
View shooting, or scroll over the
image during magnified view.
You can use <9> to set menu options (except [3 Erase images] and [5
Format]) (p.45).
42
Basic Operation
5 Making Selections with the Quick Control Dial
Before using the <5> dial, set the power switch to <J>.
(1) After pressing a button, turn the
<5> dial.
When you press a button, its function remains
selected for 6 seconds (9). During this
time, you can turn the <5> dial to set the
desired setting. When the function selection
turns off or if you press the shutter button
halfway, the camera will be ready to shoot.
Use the dial to select or set the shooting mode,
drive mode, flash exposure compensation, AF
point, ISO speed, Picture Style, exposure
compensation when the <O> button is
pressed, image size, white balance, etc.
Y
P
O
(2) Turn the <5> dial only.
C
While looking at the viewfinder or top LCD panel,
turn the <5> dial to set the desired setting.
Use this dial to set the exposure
compensation amount, aperture setting for
manual exposures, selecting an AF point, etc.
You can do step (1) even when the power switch is set to <1>.
Vertical Shooting
The camera bottom has vertical-grip buttons and a dial (p.16, 17).
Before using the vertical grip’s buttons and dial,
set the vertical-grip ON/OFF switch to <1>.
When not using the vertical shooting
controls, set the switch to <2> to
prevent accidental operation.
43
Menu Operations
You can set various settings with the menus such as the beeper, date/
time, etc. While looking at the LCD monitor, use the <M> button
on the camera back and the <6> <5> dials.
<M> button
LCD monitor
<6> Main Dial
<5>
Quick Control Dial
<0> button
4 Playback 2
3 Playback 1
2 Shooting 2
1 Shooting 1
Tab
C
Y
P
O
5 Set-up 1
6 Set-up 2
7 Set-up 3
8 Custom Functions
9 My Menu
Menu settings
Menu items
Icon
Color
1/2
Red
Shooting menu
Shooting-related items
3/4
Blue
Playback menu
Image playback-related items
5/6/7
Yellow
Set-up menu
Camera’s function settings
44
Category
Description
8
Orange Camera’s Custom Functions
9
Green
Register frequently-used menu options and Custom
Functions
Menu Operations
Menu Setting Procedure
1
Display the menu.
Press the <M> button to display
the menu.
a tab.
2 Select
Turn the <6> dial to select a tab.
the desired item.
3 Select
Turn the <5> dial to select the item,
then press <0>.
Y
P
O
the setting.
4 Select
Turn the <5> dial to select the
C
desired setting.
The current setting is indicated in
blue.
the selected setting.
5 SetPress
<0> to set it.
Exit the menu.
6 Press the <M> button to exit the
menu and return to camera shooting
ready.
The explanation of menu functions hereinafter assumes that you have
pressed the <M> button to display the menu screen.
You can use <9> to set menu options (except [3 Erase images] and
[5 Format]).
45
Menu Settings
1 Shooting 1 (Red)
White balance
Page
Q / W / E / R / Y / U / I / O (1 - 5) /
P (2500 - 10000) / PC-1 - 5
72
Custom WB registration Manual registration of white balance data
73
WB SHIFT/BKT
WB correction: B/A/M/G bias, 9 levels each
WB-BKT: B/A and M/G bias, single-level
increments, ±3 levels
79
80
Color space
sRGB / Adobe RGB
92
Picture Style
PStandard / QPortrait / RLandscape /
SNeutral / UFaithful / VMonochrome /
WUser Def. 1, 2, 3
66-71
Peripheral illumination
Enable / Disable
correction
2 Shooting 2 (Red)
JPEG quality
Image size
Y
P
O
82
Compression rate for 3, 4, 5, 6
63
1 / K1 / 61
3/4/5/6
C
(→ p.48
)
59
Review time
Off / 2 sec. / 4 sec. / 8 sec. / Hold
181
Beep
On / Off
52
Release shutter
without card
Enable / Disable
52
Dust Delete Data
Obtain data to be used by provided software to
delete dust spots
185
External Speedlite
control
Flash function settings / Flash C.Fn settings /
Clear all Speedlite C.Fn’s
121
Protect images
Erase-protect images
172
Rotate
Rotate vertical images
162
Erase images
Erase images
179
Print order
Specify images to be printed (DPOF)
199
Image copy
Copy images between cards
176
External media
backup
Displayed when external media is used via WFT-E2
II A/B/C/D or WFT-E2/E2A (both sold separately)
3 Playback 1 (Blue)
46
-
Menu Settings
4 Playback 2 (Blue)
Page
Highlight alert
Disable / Enable
157
AF point display
Disable / Enable
158
Histogram
Brightness / RGB
158
Enlarge display
Enlarge from image center / Enlarge from
selected AF point
161
Image jump w/6
1 image / 10 images / 100 images / Date / Folder
/ Movies / Stills
160
Slide show
Select the images and set the Play time and
Repeat settings for automatic playback
168
Auto power off
1min. / 2 min. / 4 min. / 8 min. / 15 min. / 30 min.
/ Off
52
Record func+media/
folder sel.
[Record func.] Standard / Auto switch media /
Rec. separately / Rec. to multiple
[Record/play] [Playback] f / g / u
[Folder] Creating and selecting a folder
File numbering
Continuous / Auto reset / Manual reset
88
File name setting
File name (unique setting) / User setting 1 / User
setting 2
86
Auto rotate
OnzD / OnD / Off
182
Format
Initialize and erase data in the card
50
LCD brightness
Adjustable to one of seven brightness levels
180
Date/Time
Set the date (year, month, day) and time (hour,
min., sec.)
49
LanguageK
Language selectable
49
Video system
NTSC / PAL
170
Battery info.
Type, remaining capacity, shutter count,
recharge performance check
247
5 Set-up 1 (Yellow)
C
Y
P
O
57
56
84
6 Set-up 2 (Yellow)
LV z/k setting / AF mode / Grid display /
Live View/Movie func.
Exposure simulation / Metering timer / Movie
set.
recording size / Sound recording
(→ p.48
)
126
130
142
151
47
Menu Settings
7 Set-up 3 (Yellow)
Page
Save/load settings on
Save/load camera settings to/from the card
media
238
Regist/apply basic
settings
The camera’s basic settings are registered in
and applied to the camera
240
Clear all camera
settings
Resets the camera to the default settings
53
Copyright
information
Display copyright information / Enter author’s name /
Enter copyright details / Delete copyright information
90
Sensor cleaning
Auto cleaning / Clean now / Clean manually
184
Firmware Ver.
For updating the firmware
-
WFT settings
Displayed when external media is used via WFT-E2
II A/B/C/D or WFT-E2/E2A (both sold separately)
-
8 Custom Functions (Orange)
C.Fn I: Exposure
Y
P
O
C.Fn II: Image/Flash
exposure/Display Customize camera functions as desired
C.Fn III: Autofocus/Drive
C.Fn IV: Operation/Others
Clear all Custom
Functions (C.Fn)
C
Clears all Custom Function settings
C.Fn setting register/ Custom Function settings are registered in and
apply
applied to the camera
208
214
218
227
204
235
9 My Menu (Green)
My Menu settings
Register frequently-used menu items and
Custom Functions
237
What is displayed in [2 Image size] depends on the [Record func.]
(p.57) setting under [5 Record func+media/folder sel.]. If [Record
func.] is set to [Rec. separately], select the image size for the respective
card.
What is displayed for [LV z/k set.] depends on the [6 Live View/
Movie func. set.] setting. Also, what is displayed (frame rate) for [Movie
rec. size] depends on the [6 Video system] setting.
48
Before You Start
3 Setting the Interface Language
1
Select [LanguageK].
Under the [6] tab, select
[LanguageK] (the third item from
the top), then press <0>.
the desired language.
2 SetTurn
the <5> dial to select the
language, then press <0>.
X The interface language will change.
Y
P
C1 O
3 Setting the Date and Time
Check if the camera’s date and time are set correctly. If necessary, set
the correct date and time.
Select [Date/Time].
Under the [6] tab, select [Date/
Time], then press <0>.
the date, time and date display format.
2 SetTurn
the <5> dial to select the number.
Press <0> so
is displayed.
Turn the <5> dial to select the desired
.)
setting, then press <0>. (Returns to
3 ExitTurnthethesetting.
<5> dial to select [OK],
then press <0>.
X The date/time will be set and the
menu will reappear.
It is important to set the correct date/time because it will be recorded
together with each captured image.
49
Before You Start
3 Formatting the Card
If the card is new or was previously formatted by another camera or
personal computer, formatting the card with the camera is recommended.
When the card is formatted, all images and data in the card will
be erased. Even protected images will be erased, so make
sure there is nothing you need to keep. If necessary, transfer
the images to a personal computer, etc., before formatting the
card.
1
Select [Format].
Under the [5] tab, select [Format],
then press <0>.
Y
P
O
the card.
2 Select
[f] is the CF card, and [g] is the SD
C
card.
Turn the <5> dial to select the card,
then press <0>.
[OK].
3 Select
When [g] is selected, low-level
formatting is possible (p.51).
Turn the <5> dial to select [OK],
then press <0>.
X The card will be formatted.
X When the formatting is completed,
the menu will reappear.
50
Before You Start
When the card is formatted or data is erased, only the file management
information is changed. The actual data is not completely erased. Be aware
of this when selling or discarding the card. When discarding the card,
execute low-level formatting or destroy the card physically to prevent the
data from being leaked.
The card capacity displayed on the card format screen might be smaller
than the capacity indicated on the card.
About Low-level Formatting
When [g] is selected, low-level formatting is possible. If the writing
speed to the SD card is slower than usual or if you want to completely
erase the data in the SD card, checkmark [Low level format] and
format the card.
Y
P
O
Press the <L> button.
In step 3 on the preceding page,
press the <L> button.
X The [Low level format] option will be
checkmarked <X>.
With <X> displayed, select [OK] to
start the low-level formatting.
C
Since low-level formatting will erase all recordable sectors in the SD
card, the formatting will take longer than normal formatting.
You can stop the low-level formatting by selecting [Cancel]. Even in this
case, normal formatting will have been completed and you can use the
SD card as usual.
51
Before You Start
3 Set the Power-off Time/Auto Power Off
To save battery power, the camera turns off automatically after a certain
time of non-operation. You can change this auto power-off time. If you
do not want the camera to turn off automatically, set this to [Off]. After
the power turns off, you can turn on the camera again by pressing the
shutter button or other button.
1
Select [Auto power off].
Under the [5] tab, select [Auto
power off], then press <0>.
the desired time.
2 SetTurn
the <5> dial to select the
setting, then press <0>.
Y
P
O
Even if [Off] has been set, the LCD monitor will turn off automatically after
30 min. to save power. (The camera’s power does not turn off.)
C
3 Silencing the Beeper
Prevents the beeper from sounding when focus is achieved.
1 Select [Beep].
Under the [2] tab, select [Beep], then press <0>.
2 Select [Off].
Turn the <5> dial to select [Off], then press <0>.
3 Card Reminder
This prevents shooting if there is no card in the camera.
1 Select [Release shutter without card].
Under the [2] tab, select [Release shutter without card], then
press <0>.
2 Select [Disable].
Turn the <5> dial to select [Disable], then press <0>.
52
Before You Start
3 Reverting the Camera to the Default Settings
The camera’s shooting settings and menu settings can be reverted to the default.
1
Select [Clear all camera settings].
Under the [7] tab, select [Clear all
camera settings], then press <0>.
[OK].
2 Select
Turn the <5> dial to select [OK],
then press <0>.
X The camera’s default settings will be
as shown below.
Shooting Settings
Y
P
O
Shooting mode
AF mode
AF point
d (Program AE)
One-Shot AF
Automatic selection
Metering mode
q (Evaluative
metering)
Drive mode
Exposure
compensation
AEB
Flash exposure
compensation
External
Speedlite control
Image-recording Settings
Canceled
Record func.
Image size
JPEG quality
ISO speed
Picture Style
Peripheral illumination
correction
Color space
White balance
0 (Zero)
Custom WB data
Unchanged
Personal WB
C
u (Single shooting)
0 (Zero)
WB correction
WB-BKT
File numbering
File name setting
Copyright
information
Auto cleaning
Dust Delete Data
Standard
3 (Large)
8
A (AUTO)
P (Standard)
Enable/Correction
data retained
sRGB
Q (Auto)
Registered
setting retained
Registered
setting retained
Canceled
Canceled
Continuous
Preset code
Information
retained
Enable
Erased
53
Before You Start
Camera Settings
Auto power off
Beep
Release shutter
without card
Review time
Highlight alert
AF point display
Registered AF point
Histogram
Enlarge display
Image jump w/6
Auto rotate
Slide show
LCD brightness
Date/Time
Language
Video system
Basic settings
My Menu settings
Display from My
Menu
Custom Functions
54
Live View/Movie Shooting Settings
1 min.
On
LV z/k setting
AF mode
Grid display
Exposure
simulation
Enable
2 sec.
Disable
Disable
Canceled
(Center)
Brightness
Center
10 images
OnzD
All image
Unchanged
Unchanged
Unchanged
Unchanged
Unchanged
C
Disable
Unchanged
Disable
Live mode
Off
Enable
Movie-recording
size
1920x1080
Sound recording
Metering timer
On
16 sec.
Y
P
O
Image Settings
Y
P
O
This chapter explains image-related function settings:
Image-recording quality, ISO speed, Picture Style, white
balance, Auto Lighting Optimizer, lens peripheral
illumination correction, etc.
C
55
Selecting the Card to Record or Playback
This Instruction Manual assumes that a CF card or SD card is in the
camera. When an external media is used via the Wireless File
Transmitter WFT-E2 II A/B/C/D or WFT-E2/E2A (both sold separately),
the <u> icon will appear as the third recording media. It can be
selected in the same way as with the CF card <f> and SD card <g>.
If either a CF card or an SD card is in the camera, the card to
record images will be selected automatically.
If both the CF and SD cards are in the camera, you can select the card
for recording or playing images as follows:
1
Press the <B> button. (9)
Press the <B> button once or
twice to display the card and image
size on the rear LCD panel.
Y
P
O
Card/Image size z WB
the card.
2 Select
Turn the <6> dial to select the card
C
for recording images.
A : Record to CF card
S : Record to SD card
Turn the <5> dial to select the
image size (p.59).
3 Card Selection and Recording and Playback
You can also use the [5 Record func+media/folder sel.] menu’s [Record/
play] ([Playback]) option to select the card. Depending on the [Record func.]
(p.57) setting, the operation selected here will have a different function.
[Standard] [Auto switch media]
The operation explained on this page selects the card for recording
and playing back images.
[Rec. separately] [Rec. to multiple]
The captured image is recorded to the CF card and SD card
simultaneously. In this case, the operation explained on this page
selects the card for playing back images.
56
Selecting the Card to Record or Playback
3 Recording Method with Two Cards Inserted
If both the CF card and SD card are inserted into the camera, you can
set the recording method for the cards.
1
Select [Record func+media/folder
sel.].
Under the [5] tab, select [Record
func+media/folder sel.], then press
<0>.
[Record func.].
2 Select
Turn the <5> dial to select [Record
func.], then press <0>.
Y
P
O
the recording method.
3 Select
Turn the <5> dial to select the
recording method, then press <0>.
C
Standard
Images will be recorded to the card selected with the procedure on
the preceding page.
Auto switch media
Same as with the [Standard] setting, but if the card becomes full,
the camera will automatically switch to the other card to record
images.
Rec. separately
You can set the image size to be recorded for each card (p.59). Each
image is recorded to both the CF and SD cards at the image size
you have set. The image size can be set freely to 3 and 5 or 1
and K1, for example.
Rec. to multiple
Each image is recorded to both the CF and SD cards simultaneously
at the same image size. You can also select RAW+JPEG.
57
Selecting the Card to Record or Playback
When [Auto switch media] is set, the card for recording will switch from
f to g to u.
When [Rec. separately] or [Rec. to multiple] is set, the image will be
recorded under the same file number to both the CF and SD cards. Also,
the top LCD panel and viewfinder will display the number of possible
shots of the card having the lower number. If one of the cards becomes
full, [Card* full] will be displayed and shooting will be disabled. If this
happens, either replace the card or set the recording method to
[Standard] or [Auto switch media] and select the card with remaining
space to continue shooting.
C
58
Y
P
O
Setting the Image-recording Quality
You can set the image size (recorded pixels), image type (JPEG or
RAW), and JPEG quality (compression rate).
Selecting the Image Size
3/4/5/6 will record the image as a JPEG image. In the 1/K1/
61 mode, the image will require processing with the software
provided.
You can set the image size in one of the two ways below.
Using the Rear LCD Panel to Set the Image Size
1
Press the <B> button. (9)
Press the <B> button once or
twice to display the card and image
size on the rear LCD panel.
Y
P
2O
C
Image size/Card z WB
Select the image size.
Turn the <5> dial to select the
image size.
If 1/K1/61 and 3/4/5/6 are
displayed at the same time, the RAW
and JPEG image will be recorded
simultaneously on the card.
Turn the <6> dial to select the card
to record or playback images (p.56).
When [Record func.] is set to [Rec. separately] (p.57), turn the <6> dial
to select the card and set the image size for the respective card.
59
Setting the Image-recording Quality
Using the Menu Screen to Set the Image Size
Select [Image size].
1
Under the [2] tab, select [Image
size], then press <0>.
image size.
2 SetTotheselect
a RAW image size, turn the
<6> dial. To select a JPEG image
size, turn the <5> dial.
On the screen, the “***M (megapixels)
**** x ****” number indicates the
recorded pixel count, and [****] is the
number of possible shots.
Press <0> to set it.
C
Image Size Setting Examples
3 only
Y
P
O
1 only
61+5
If [–] is set for both RAW and JPEG, 3 will be set.
If [Record func.] is set to [Rec. separately] (p.57), the setting screen will
be different. You can set the image size for each card.
In accordance with the selected image size, the <p> or <1> icon will
be displayed on the right side in the viewfinder.
The image size icons indicate the following: 1 (RAW), K1 (Medium
RAW), 61 (Small RAW), JPEG, 3 (Large), 4 (Medium 1), 5
(Medium 2), 6 (Small).
60
Setting the Image-recording Quality
Guide to Image-recording Quality Settings (Approx.)
Pixels
Recorded
Print Size
File Size
(MB)
Possible
Shots
3
16.0M
A3 or larger
5.7
692
85 (121)
4
12.4M
Around A3
4.5
874
111 (164)
Image Size
Maximum
Burst
5
8.4M
A4 or larger
3.5
1148
182 (309)
6
4.0M
A5 or larger
2.0
1957
1957 (5447)
16.0M
A3 or larger
26 (28)
22.2
175
1+3
16.0M+16.0M
22.2+5.7
139
20 (20)
1+4
16.0M+12.4M
22.2+4.5
145
20 (20)
1+5
16.0M+8.4M
22.2+3.5
152
20 (20)
1+6
16.0M+4.0M
22.2+2.0
20 (20)
K1
9.0M
Y
P
O
161
14.8
263
33 (35)
14.8+5.7
190
20 (20)
14.8+4.5
202
20 (20)
14.8+3.5
214
20 (20)
1
K1+3
9.0M+16.0M
K1+4
9.0M+12.4M
K1+5
9.0M+8.4M
K1+6
9.0M+4.0M
61
4.0M
-
A4 or larger
C
-
A5 or larger
14.8+2.0
232
20 (20)
9.9
397
43 (43)
61+3
4.0M+16.0M
9.9+5.7
251
20 (20)
61+4
4.0M+12.4M
9.9+4.5
272
20 (20)
61+5
4.0M+8.4M
9.9+3.5
294
20 (20)
61+6
4.0M+4.0M
9.9+2.0
329
20 (20)
-
Figures for the file size, possible shots, and maximum burst during continuous
shooting are based on Canon’s 4GB testing card and Canon’s testing
standards (JPEG quality 8, ISO 100, and Standard Picture Style). These
figures will vary depending on the subject, card brand, ISO speed,
Picture Style, Custom Functions, and other settings.
The maximum burst applies to <o> high-speed continuous shooting.
Figures in parentheses apply to an Ultra DMA (UDMA) mode 6 16GB card
based on Canon’s testing standards.
61
Setting the Image-recording Quality
About RAW
A RAW image is the raw data output by the image sensor, converted to
digital data and recorded on the card as is. You can select from 1,
K1, or 61 (Commonly referred as RAW in this manual).
With RAW images, you can use the provided software to make various
adjustments as desired and then generate a JPEG, TIFF, etc., image.
Commercially-available software might not be able to display RAW images.
Using the provided software is recommended.
Maximum Burst During Continuous Shooting
The maximum burst during continuous shooting indicated
on the preceding page is the number of continuous shots
that can be taken without stopping, based on a formatted
card.
In the viewfinder, the approximate maximum burst is
indicated on the right side.
C
Y
P
O
The maximum burst is displayed even when a card is not inserted in the
camera. Make sure that a card is loaded before taking a picture.
If [8C.Fn II -2: High ISO speed noise reduction] is set to [2: Strong],
the maximum burst will be greatly reduced (p.214).
If the viewfinder displays “99” for the maximum burst, it means the
maximum burst is 99 or higher. If the maximum burst decreases to 98 or
lower and the internal buffer memory becomes full, “buSY” will be
displayed on the top LCD panel and in the viewfinder and shooting will
be disabled temporarily. If you stop the continuous shooting, the
maximum burst will increase. After all the captured images are written to
the card, the maximum burst will be as listed on page 61.
The maximum burst indicator in the viewfinder will not change even
when you use a UDMA CF card. However, the maximum burst shown in
parentheses on page 61 will apply.
62
Setting the Image-recording Quality
3 Setting the JPEG Quality (Compression Rate)
The recording quality (compression rate) can be set for each image size
3/4/5/6.
1
Select [JPEG quality].
2
Select the image size.
Under the [2] tab, select [JPEG
quality], then press <0>.
Turn the <5> dial to select the
image size, then press <0>.
C3
Y
P
O
Set the desired quality
(compression rate).
Turn the <5> dial to select the
setting, then press <0>.
The higher the number, the higher the
quality will be (lower compression).
For 6 - 10, <i> is displayed. For 1 5, <o> is displayed.
The higher the recording quality, the fewer the number of possible shots will
be. On the other hand, the lower the recording quality, the higher the
number of possible shots will be.
63
Z: Setting the ISO Speed
Set the ISO speed (image sensor’s sensitivity to light) to suit the
ambient light level.
1 Press the <Z> button. (9)
the ISO speed.
2 SetWhile
looking at the top LCD panel or
in the viewfinder, turn the <6> dial.
ISO speed can be set within ISO 10012800 in 1/3-stop increments.
With “A” selected, the ISO speed will
be set automatically (p.65).
ISO Speed Guide (No flash)
Y
P
O
ISO Speed
Shooting Situation
100 - 400
Sunny outdoors
400 - 1600
Overcast skies or evening time
1600 - 12800,
H1, H2, H3
Dark indoors or night
C
Flash Range
The higher the ISO speed,
the farther the flash range
will be.
If [8C.Fn II -3: Highlight tone priority] is set to [1: Enable], the
settable ISO speed range will be ISO 200 - 12800 (p.215).
Using a high ISO speed or shooting in high-temperature conditions may
result in more grainy images. Long exposures can also cause irregular
colors in the image.
When you shoot at high ISO speeds, noise (horizontal banding, dots of
light, etc.) or irregular colors may appear. Also, if you shoot with the ISO
speed range upper limit expanded to H1, H2 or H3 with [8C.Fn I -3: Set
ISO speed range] (p.208), noise and irregular colors may become more
visible.
With [8C.Fn I -3: Set ISO speed range], the ISO speed range can be
expanded from ISO 50 (L) to ISO 102400 (H3).
64
Z: Setting the ISO Speed
About “A” (Auto) ISO Speed
If the ISO speed is set to “A”, the actual
ISO speed to be set will be displayed
when you press the shutter button
halfway. As indicated below, the ISO
speed will be set automatically to suit the
shooting mode.
Default ISO Speed
Shooting Mode
ISO Speed Setting
d/s/f/a
ISO 100 - 12800
Bulb
Fixed at ISO 400
With flash
Fixed at ISO 400*
Y
P
O
* If the shooting mode is <d> and bounce flash is set with an external Speedlite,
ISO 400-1600 will be set automatically.
* If fill flash results in overexposure, ISO 100 or a higher ISO will be set.
C
With [8C.Fn I -3: Set ISO speed range] (p.208), the upper and lower limit
settings and ISO Auto setting will work as follows.
In d/s/f/a shooting modes
Even if the upper limit is set to H1, H2, or H3 and the lower limit to L, ISO
100-12800 will be set automatically.
If you narrowed the upper and lower limits from the default setting, the
ISO speed will be set automatically within the range you have set.
With bulb exposures and flash photography
If ISO 400 is not within the upper and lower limit, the ISO speed will be
set close to 400.
Even if [8C.Fn I -3: Set ISO speed range], [8C.Fn I -12: Set shutter
speed range] (p.211), or [8C.Fn I -13: Set aperture value range] (p.211)
is set to limit the settable range, if [8C.Fn I -8: Safety shift] (p.210) is set
to [1: Enable (Tv/Av)] or [2: Enable (ISO speed)], a setting outside the
limited range might be set to obtain a correct exposure.
65
A Selecting a Picture Style
By selecting a Picture Style, you can obtain image effects matching
your photographic expression or the subject.
1
Press the <A> button.
When the camera is ready to shoot,
press the <A> button.
X The Picture Style screen will appear.
a Picture Style.
2 Select
Turn the <6> or <5> dial to select
a Picture Style, then press <0>.
X The Picture Style will be set and the
camera will be ready to shoot.
Y
P
O
You can also use the [1 Picture Style] menu to select the Picture Style.
Picture Style Effects
C
P Standard
The image looks vivid, sharp, and crisp. This is a general-purpose
Picture Style suitable for most scenes.
Q Portrait
For nice skin tones. The image looks softer. Effective for close-ups
of women or children.
By changing the [Color tone] (p.68), you can adjust the skin tone.
R Landscape
For vivid blues and greens, and very sharp and crisp images.
Effective for impressive landscapes.
66
A Selecting a Picture Style
S Neutral
This Picture Style is for users who prefer to process images with
their computer. For natural colors and subdued images.
U Faithful
This Picture Style is for users who prefer to process images with
their computer. When the subject is captured under a daylight color
temperature of 5200K, the color is adjusted colorimetrically to match
the subject’s color. The image is dull and subdued.
V Monochrome
Creates black-and-white images.
JPEG images shot in Monochrome cannot be reverted to color. If you
want to later shoot pictures in color, make sure the [Monochrome]
setting has been canceled. When [Monochrome] is selected, <0>
will appear in the viewfinder and on the rear LCD panel.
Y
P
O
W User Def. 1-3
You can select a base Picture Style such as [Portrait] or [Landscape],
a Picture Style file, etc., adjust it as desired and register it under [User
Def. *] (p.70). Any User Defined Picture Style which has not been set
will have the same settings as the Standard Picture Style.
C
About the Symbols
The symbols on the top of the Picture Style selection screen refer to parameters
such as [Sharpness] and [Contrast]. The numerals indicate the parameter
settings, such as [Sharpness] and [Contrast], for each Picture Style.
Symbols
g
Sharpness
h
Contrast
i
Saturation
j
Color tone
k
Filter effect (Monochrome)
l
Toning effect (Monochrome)
67
A Customizing a Picture Style
You can customize a Picture Style by adjusting individual parameters
like [Sharpness] and [Contrast]. To see the resulting effects, take test
shots. To customize [Monochrome], see the next page.
1 Press the <A> button.
a Picture Style.
2 Select
Turn the <6> or <5> dial to select
a Picture Style, then press the
<B> button.
a parameter.
3 Select
Turn the <5> dial to select the
parameter, then press <0>.
C
Y
P
O
the parameter.
4 SetTurn
the <5> dial to set the
parameter as desired, then press
<0>.
Press the <M> button to save
the adjusted parameters. The Picture
Style selection screen will reappear.
X Any settings different from the default
will be displayed in blue.
Parameter Settings and Effects
g Sharpness
0: Less sharp outline
+7: Sharp outline
h Contrast
-4: Low contrast
+4: High contrast
i Saturation
-4: Low saturation
+4: High saturation
j Color tone
-4: Reddish skin tone
+4: Yellowish skin tone
68
A Customizing a Picture Style
By selecting [Default set.] in step 3, you can revert the respective
Picture Style to its default parameter settings.
To shoot with the Picture Style you modified, follow step 2 on the
preceding page to select the modified Picture Style and then shoot.
Monochrome Adjustment
For Monochrome, you can also set [Filter effect] and [Toning effect] in
addition to [Sharpness] and [Contrast].
kFilter Effect
With a filter effect applied to a
monochrome image, you can make
white clouds or green trees stand out
more.
Filter
C
Y
P
O
Sample Effects
N: None
Normal black-and-white image with no filter effects.
Ye: Yellow
The blue sky will look more natural, and the white clouds will look
crisper.
Or: Orange
The blue sky will look slightly darker. The sunset will look more brilliant.
R: Red
The blue sky will look quite dark. Fall leaves will look crisper and brighter.
G: Green
Skin tones and lips will look fine. Tree leaves will look crisper and
brighter.
Increasing the [Contrast] will make the filter effect more pronounced.
lToning Effect
By applying a toning effect, you can create
a monochrome image in that color. It can
make the image look more impressive.
The following can be selected: [N:None]
[S:Sepia] [B:Blue] [P:Purple] [G:Green].
69
A Registering a Picture Style
You can select a base Picture Style such as [Portrait] or [Landscape],
adjust its parameters as desired and register it under [User Def. 1],
[User Def. 2], or [User Def. 3].
You can create Picture Styles whose parameter settings such as for sharpness
and contrast are different. You can also adjust the parameters of a Picture Style
which has been registered to the camera with the provided software.
1 Press the <A> button.
[User Def.].
2 Select
Turn the <6> or <5> dial to select
[User Def. *], then press the <B>
button.
Y
P
O
<0>.
3 Press
With [Picture Style] selected, press
C
<0>.
the base Picture Style.
4 Select
Turn the <5> dial to select the base
Picture Style, then press <0>.
To adjust the parameters of a Picture
Style which has been registered to the
camera with the provided software,
select the Picture Style here.
a parameter.
5 Select
Turn the <5> dial to select a
parameter such as [Sharpness], then
press <0>.
70
A Registering a Picture Style
the parameter.
6 SetTurn
the <5> dial to set the
parameter as desired, then press
<0>.
For details, see “Customizing a
Picture Style” on pages 68-69.
Press the <M> button to register
the new Picture Style. The Picture
Style selection screen will then
reappear.
X The base Picture Style will be
indicated on the right of [User Def. *].
C
Y
P
O
If a Picture Style has already been registered under [User Def. *], changing
the base Picture Style in step 4 will nullify the parameter settings of the
registered Picture Style.
To shoot with the registered Picture Style, follow step 2 on the preceding
page to select [User Def. *] and then shoot.
71
Setting the White Balance
White balance (WB) is for making the white areas look white. Normally,
the <Q> (Auto) setting will obtain the correct white balance. If naturallooking colors cannot be obtained with <Q>, you can set the white
balance manually to suit the respective light source.
1
Press the <B> button. (9)
Press the <B> button once or
twice to display the WB on the rear
LCD panel’s upper right.
WB z Card/Image size
the white balance.
2 Select
Turn the <5> dial to select the WB.
Display
Mode
Y
P
O
Color Temperature (Approx. K: Kelvin)
Q
Auto
W
Daylight
3000 - 7000
E
Shade
R
Cloudy, twilight, sunset
Y
Tungsten light
U
White fluorescent light
I
Flash use
5200
C
7000
6000
3200
4000
6000
O
Custom (p.73)
2000 - 10000
P
Color temperature (p.78)
2500 - 10000
About White Balance
To the human eye, a white object looks white regardless of the type of lighting.
With a digital camera, the color temperature is adjusted with software to make
the white areas look white. This adjustment serves as the basis for the color
correction. The result is natural-looking colors in the pictures.
You can also use the [1 White balance] menu to set the white balance.
To set Personal WB, select [PC-*]. To save the Personal WB to the
camera, use the provided software. If Personal WB has not been
registered, [PC-*] will not be displayed.
72
O Custom White Balance
Custom white balance enables you to manually set the white balance
for a specific light source for better accuracy. Up to five Custom white
balance data can be registered to the camera. You can also append a
name (caption) to the registered Custom white balance data.
3 Registering Custom WB
There are two ways to register Custom white balance data. You can
either take a picture and register it, or register an image already saved
in the card.
Capture and register the image
Select [Custom WB regist.].
1
Under the [1] tab, select [Custom
WB regist.], then press <0>.
Y
P
C2 O
Select the Custom WB No. to be
registered.
Press <0>.
Turn the <5> dial to select 1 to 5 for
<O*>, then press <0>. The
Custom WB data will be registered
under the selected No.
[Record and register
3 Select
image].
Turn the <5> dial to select [Record
and register image], then press
<0>.
X The LCD monitor will turn off, and the
selected No. [ * ] will blink on the rear
LCD panel.
73
O Custom White Balance
a solid-white object.
4 Photograph
The plain, white object should fill the
center spot metering circle.
Focus manually and set the standard
exposure for the white object.
Any white balance mode may be set.
Spot metering circle
X The Custom WB data will be
registered.
To use the Custom WB, see
“Selecting and Shooting with the
Custom WB data” (p.76).
C
Y
P
O
Custom WB data can also be registered as follows:
1. Press the <B> button and turn the <5> dial to select <O>
(p.72).
2. Then turn the <6> dial to select the No. under which the Custom
WB is to be registered.
3. Press the <A> button.
→ [ * ] will blink on the rear LCD panel.
4. Follow step 4 above to photograph a solid-white object.
→ The Custom WB data will be registered under the selected No.
When a picture is taken, the registered Custom white balance will be
applied.
If the exposure of the picture differs greatly from the standard exposure,
a correct white balance might not be obtained. If [Correct WB may not
be obtained with the selected image] is displayed in step 4, go back to
step 1 and try again.
The image captured in step 4 will not be recorded to the card.
Instead of a white object, an 18% gray card (commercially available) can
produce a more accurate white balance.
74
O Custom White Balance
Register image on card
First follow step 4 under “Capture and register the image” (p.73,
74) to take a picture of a plain, white object. This image saved in
the card can then be registered for Custom WB. The procedure up
to step 2 is the same as with “Capture and register the image”.
1 Select [Custom WB regist.].
the Custom WB No. to be
2 Select
registered.
[Register image on card].
3 Select
Turn the <5> dial to select [Register
image on card], then press <0>.
X The images saved in the card will be
displayed.
Y
P
4O
C
Select the image to be used for
registrating the Custom WB data.
You can also display a four- or nine-image
index by pressing the <y> button.
Turn the <5> dial to select the
image to be registered for the Custom
WB data, then press <0>.
[OK].
5 Select
Turn the <5> dial to select [OK],
then press <0>.
X The Custom WB data will be registered.
When the message appears, press
<0> to return to step 3.
To use the Custom WB, see “Selecting and
Shooting with the Custom WB data” (p.76).
If the image was captured while the Picture Style was set to [Monochrome]
(p.67), it cannot be selected in step 4.
75
O Custom White Balance
3 Selecting and Shooting with the Custom WB data
Registered image
1
Select the Custom WB No.
On the Custom WB registration
screen, select the No. of the
registered Custom WB.
[Set as white balance].
2 Select
Turn the <5> dial to select [Set as
white balance], then press <0>.
X The WB will be set to the registered
<O*>.
Y
P
O
the picture.
3 Take
X The picture will be taken with the
C
<O*> setting.
You can also select the Custom WB No. while looking at the rear LCD panel.
Press the <B> button and turn the <5> dial to select <O>. Then turn
the <6> dial to select the registered Custom WB No.
3 Naming the Custom WB data
You can also append a name (caption) to the registered Custom white
balance data.
1
76
Select the Custom WB No.
On the Custom WB data registration
screen, select the Custom WB No. to
be appended with a name.
O Custom White Balance
[Edit caption].
2 Select
Turn the <5> dial to select [Edit
caption], then press <0>.
any name.
3 Enter
Press the <H> button, and the text
C4
palette will be highlighted in a color
frame and text can be entered.
Operate the <5> dial or <9> to
move the and select the desired
character. Then press <0> to enter
it.
You can enter up to 20 characters.
To delete a character, press the <L>
button.
Y
P
O
Exit the setting.
After entering the name, press the
<M> button.
X The name will be saved and the
screen will return to step 2. The
entered name will be displayed below
<O*>.
Entering a name which indicates the Custom WB’s place or light source type
makes it convenient.
77
P Setting the Color Temperature
You can set the white balance’s color temperature numerically in Kelvin.
This is for advanced users.
1
Press the <B> button. (9)
Press the <B> button once or
twice to display the white balance on
the rear LCD panel’s upper right.
WB z Card/Image size
<P>.
2 Select
Turn the <5> dial to select <P>.
the desired color
3 Set
temperature.
Y
P
O
Turn the <6> dial to set the color
temperature.
The color temperature can be set
from 2500K to 10000K in 100K
increments.
C
When setting the color temperature for an artificial light source, set white
balance correction (magenta or green) as necessary.
If you want to set <P> to the reading taken with a commerciallyavailable color temperature meter, take test shots and adjust the setting
to compensate for the difference between the color temperature meter’s
reading and the camera’s color temperature reading.
You can also use the [1 White balance] menu to set the white balance.
78
u White Balance Correction
You can correct the white balance that has been set. This adjustment
will have the same effect as using a commercially-available color
temperature conversion filter or color compensating filter. Each color
can be corrected to one of nine levels.
This is for advanced users who are familiar with using color temperature
conversion or color compensating filters.
White Balance Correction
1
Select [WB SHIFT/BKT].
Under the [1] tab, select [WB
SHIFT/BKT], then press <0>.
Y
P
O
the white balance correction.
2 SetUse
<9> to move the “ ” mark to the
C
Sample setting: A2, G1
desired position.
B is for blue, A is amber, M is
magenta, and G is green. The color in
the respective direction will be
corrected.
On the upper right, “SHIFT” indicates
the direction and correction amount.
Pressing the <B> button will
cancel all the [WB SHIFT/BKT]
settings.
Press <0> to exit the setting and
return to the menu.
During the white balance correction, <u> will be displayed in the
viewfinder and on the rear LCD panel.
One level of the blue/amber correction is equivalent to 5 mireds of a color
temperature conversion filter. (Mired: Measuring unit indicating the
density of a color temperature conversion filter.)
79
u White Balance Correction
White Balance Auto Bracketing
With just one shot, three images having a different color balance can be
recorded simultaneously. Based on the color temperature of the current white
balance setting, the image will be bracketed with a blue/amber bias or
magenta/green bias. This is called white balance bracketing (WB-BKT). White
balance bracketing is possible up to ±3 levels in single-level increments.
Set the white balance bracketing amount.
B/A bias ±3 levels
In step 2 for white balance correction, when
you turn the <5> dial, the “ ” mark on the
” (3 points).
screen will change to “
Turning the dial to the right sets the B/
A bracketing, and turning it to the left
sets the M/G bracketing.
X On the right side of the screen, “BKT”
indicates the bracketing direction and
the bracketing amount.
Pressing the <B> button will cancel
all the [WB SHIFT/BKT] settings.
C
Y
P
O
Press <0> to exit the setting and
return to the menu.
Bracketing Sequence
The images will be bracketed in the following sequence: 1. Standard
white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard
white balance, 2. Magenta (M) bias, 3. Green (G) bias.
During WB bracketing, the maximum burst for continuous shooting will be
lower and the number of possible shots will also decrease to one-third the
normal number. Also, the white balance icon will blink on the rear LCD panel.
You can also set white balance correction and AEB together with white
balance bracketing. If you set AEB in combination with white balance
bracketing, a total of nine images will be recorded for a single shot.
Since three images are recorded for one shot, the card will take longer to
record the shot.
“BKT” stands for Bracketing.
80
Auto Lighting Optimizer
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically. With JPEG images, the
correction is done when the image is captured. Setting information is
appended to RAW images and automatic correction is possible with
Digital Photo Professional (provided software).
By default, [Standard] is set. However, with [8C.Fn II -4: Auto
Lighting Optimizer], you can adjust the correction amount (p.215).
1
Set [8C.Fn II -4: Auto Lighting
Optimizer].
Set the correction amount.
For details on setting a Custom
Function, see page 204.
Y
P
O
picture.
2 TakeThetheimage
will be recorded with the
C
brightness and contrast corrected if
necessary.
Î
Sample of corrected brightness
If [8C.Fn II -4: Auto Lighting Optimizer] is set to a setting other than
[3: Disable], the image might still look bright even if manual exposure,
exposure compensation, or flash exposure compensation has been set
to make the exposure darker. If you want the darker exposure, set the
Auto Lighting Optimizer to [3: Disable] first (p.215).
Depending on the shooting conditions, noise might increase.
81
3 Lens Peripheral Illumination Correction
Due to the lens characteristics, the four corners of the picture might look
darker. This is called lens light fall-off or drop in peripheral illumination.
With JPEG images, the correction is done when the image is captured.
Setting information is appended to RAW images and automatic correction
is possible with Digital Photo Professional (provided software).
The default setting is [Enable].
1
Select [Peripheral illumin.
correct.].
Under the [1] tab, select
[Peripheral illumin. correct.], then
press <0>.
setting.
2 SetOnthethecorrection
screen, check that
Y
P
O
[Correction data available] is
displayed for the attached lens.
If [Correction data not available] is
displayed, see “About the Lens
Correction Data” on the next page.
Turn the <5> dial to select [Enable],
then press <0>.
C
picture.
3 TakeThetheimage
will be recorded with the
corrected peripheral illumination.
Correction enabled
82
Correction disabled
3 Lens Peripheral Illumination Correction
About the Lens Correction Data
The camera already contains lens peripheral illumination correction
data for approx. 25 lenses. In step 2, if you select [Enable], the
peripheral light correction will be applied automatically for any lens
whose correction data has been registered in the camera.
With EOS Utility (provided software), you can check which lenses have
their correction data registered in the camera. You can also register the
correction data for unregistered lenses. For details, see the Software
Instruction Manual (CD-ROM) for EOS Utility.
C
Y
P
O
For JPEG images already captured, lens peripheral light correction
cannot be applied.
Depending on shooting conditions, noise might appear on the image
periphery.
When using a third-party lens, setting the correction to [Disable] is
recommended, even if [Correction data available] is displayed.
Lens peripheral light correction is applied even when an Extender is
attached.
If the correction data for the attached lens has not been registered to the
camera, the result will be the same as when the correction is set to
[Disable].
The correction amount applied will be slightly lower than the maximum
correction amount settable with Digital Photo Professional (provided
software).
If the lens does not have distance information, the correction amount will
be lower.
The higher the ISO speed, the lower the correction amount will be.
83
3 Creating and Selecting a Folder
You can freely create and select the folder where the captured images
are to be saved.
This is optional since a folder will be created automatically for saving
captured images.
Create a Folder
1
Select [Record func+media/folder
sel.].
Under the [5] tab, select [Record
func+media/folder sel.], then press
<0>.
Y
P
O
[Folder].
2 Select
Select [Folder], then press <0>.
C
3
Select [Create folder].
Turn the <5> dial to select [Create
folder], then press <0>.
[OK].
4 Select
Turn the <5> dial to select [OK],
then press <0>.
X A new folder with a higher one-up
folder number is created.
84
3 Creating and Selecting a Folder
Selecting a Folder
Lowest file number
Number of images
in folder
With the Select folder screen
displayed, turn the <5> dial to select
the desired folder, then press <0>.
X The folder where the captured
images will be saved is selected.
Subsequent captured images will be
recorded into the selected folder.
Folder name
Highest file number
About Folders
C
Y
P
O
As with “100EOS1D” for example, the folder name starts with three digits
(folder number) followed by five alphanumeric characters. A folder can contain
up to 9999 images (file No. 0001 - 9999). When a folder becomes full, a new
folder with a higher one-up folder number is created automatically. Also, if
manual reset (p.89) is executed, a new folder will be created automatically.
Folders numbered from 100 to 999 can be created.
Creating Folders with a Personal Computer
With the card open on the screen, create a new folder named “DCIM”. Open
the DCIM folder and create as many folders as necessary to save and
organize your images. The folder name must follow the “100ABC_D” format
where the first three digits is 100 - 999 followed by five alphanumeric
characters. The five characters can be a combination of upper- or lower-case
letters from A to Z, numerals, and an underscore “_”. There can be no space in
the folder name. Also, folder names cannot have the same three-digit number
such as “100ABC_D” and “100W_XYZ” even if the letters are different.
85
3 Changing the File Name
The file name has four alphanumeric characters
followed by a four-digit image number (p.88) and
(Ex.) BE3B0001.JPG
extension. The first four alphanumeric characters
are set upon factory shipment and unique to the
camera. However, you can change it.
With “User setting1,” you can change and register the four characters as desired.
With “User setting2,” if you register three characters, the fourth character from
the left will be appended automatically to indicate the image size.
Registering or Changing the File Name
1
Select [File name setting].
Under the [5] tab, select [File name
setting], then press <0>.
Y
P
O
[Change User setting].
2 Select
Turn the <5> dial to select [Change
User setting*], then press <0>.
C
any alphanumeric
3 Enter
characters.
For User setting1, enter four characters.
For User setting2, enter three characters.
Press the <L> button to delete any
unnecessary characters.
Press the <H> button, and the text
palette will be highlighted in a color
frame and text can be entered.
Operate the <5> dial or <9> to
move the and select the desired
character. Then press <0> to enter
it.
86
3 Changing the File Name
the setting.
4 ExitEnter
the required number of
alphanumeric characters, then press
the <M> button.
X The new file name will be registered
and the screen in step 2 will reappear.
the registered file name.
5 Select
Turn the <5> dial to select [File
name], then press <0>.
Turn the <5> dial to select the
registered file name, then press
<0>.
If User setting2 has been registered,
select “*** (the 3 characters
registered) + image size”.
Settings
About User setting2
C
Y
P
O
When you select the “*** + image size” registered with User setting2 and
take pictures, the image size character will be automatically appended as
the file name’s fourth character from the left. The meaning of the image size
characters is as follows:
“*** L” = 3, 1
“***M” = 4, K1
“*** N” = 5
“***S” = 6, 61
When the image is transferred to a personal computer, the automatically
appended fourth character will be included. You can then see the image size
without having to open the image. The image type (RAW or JPEG) can be
distinguished with the extension.
The first character cannot be an underscore “_”.
The extension will be “.JPG” for JPEG images, “.CR2” for RAW images,
and “.MOV” for movies.
When you shoot a movie with User setting2, the file name’s fourth
character will be an underscore “_”.
87
3 File Numbering Methods
The four-digit file number is like the frame
number on a roll of film. The captured images
(Ex.) BE3B0001.JPG
are assigned a sequential file number from
0001 to 9999 and saved in one folder. You can
change how the file number is assigned.
1
Select [File numbering].
Under the [5] tab, select [File
numbering], then press <0>.
the file numbering method.
2 Select
Turn the <5> dial to select the
desired method, then press <0>.
Continuous
Y
P
O
Continues the file numbering sequence even after the card is
replaced or a new folder is created.
Even after you replace the card, create a folder, or switch the target
card (such as f → g), the file numbering continues in sequence up to
9999 for the images saved. This is convenient when you want to save
images numbered anywhere between 0001 to 9999 in multiple cards or
folders into one folder in your personal computer.
If the replacement card or existing folder already contains images
recorded previously, the file numbering of the new images might
continue from the file numbering of the existing images in the card or
folder. If you want to use continuous file numbering, you should use a
newly-formatted card each time.
C
File numbering after
replacing the card
Card A (f)
XXXX0051
Card B (g)
XXXX0052
Next sequential file number
88
File numbering after
creating a folder
Card A
100
101
XXXX0051
XXXX0052
3 File Numbering Methods
Auto Reset
The file numbering restarts from 0001 each time the card is
replaced or a new folder is created.
Even after you replace the card, create a folder, or switch the target
card (such as f → g), the file numbering continues in sequence from
0001 for the images saved. This is convenient if you want to organize
images according to cards or folders.
If the replacement card or existing folder already contains images
recorded previously, the file numbering of the new images might
continue from the file numbering of the existing images in the card or
folder. If you want to save images with the file numbering starting from
0001, use a newly formatted card each time.
File numbering after
replacing the card
Card A (f)
XXXX0051
File numbering after
creating a folder
Y
P
O
Card B (g)
C
100X0001
Card A
100
101
XXXX0051
XXXX0001
File numbering is reset
Manual Reset
To reset the file numbering to 0001 or to start from file number
0001 in a new folder.
When you reset the file numbering manually, a new folder is created
automatically and the file numbering of images saved to that folder
starts from 0001.
This is convenient if you want to use different folders for the images
taken yesterday and the ones taken today, for example. After the
manual reset, the file numbering returns to continuous or auto reset.
If the file number in folder No. 999 reaches 9999, shooting will not be
possible even if the card still has storage capacity. The LCD monitor will
display a message to replace the card. Replace it with a new card.
89
3 Setting Copyright Information
When you set the copyright information, it will be appended to the
image as Exif information. You can check the entered copyright
information with the camera.
1
Select [Copyright information].
Under the [7] tab, select [Copyright
information], then press <0>.
the desired option.
2 Select
Turn the <5> dial, select either
[Enter author’s name] or [Enter
copyright details], then press <0>.
C
Y
P
O
text.
3 Enter
Press the <H> button, and the text
palette will be highlighted in a color
frame. Text can be entered.
Operate the <5> dial or <9> to
move the and select the desired
character. Then press <0> to enter
it.
You can enter up to 63 characters.
To delete a character, press the <L>
button.
the setting.
4 ExitAfter
entering the text, press the
<M> button.
X The name will be saved and the
screen will return to step 2.
90
3 Setting Copyright Information
Checking the Copyright Information
When you select [Display copyright
info.] in step 2 on the preceding page,
you can check the [Author] and
[Copyright] information that you
entered.
Deleting the Copyright Information
When you select [Delete copyright information] in step 2 on the
preceding page, you can delete the [Author] and [Copyright]
information.
C
Y
P
O
You can also enter the copyright information with EOS Utility (provided
software).
91
3 Setting the Color Space
The color space refers to the range of reproducible colors. With this
camera, you can set the color space for captured images to sRGB or
Adobe RGB. For normal shooting, sRGB is recommended.
1
Select [Color space].
Under the [1] tab, select [Color
space], then press <0>.
the desired color space.
2 SetSelect
[sRGB] or [Adobe RGB], then
press <0>.
About Adobe RGB
Y
P
O
This color space is mainly used for commercial printing and other
industrial uses. This setting is not recommended if you do not know
about image processing, Adobe RGB, and Design rule for Camera File
System 2.0 (Exif 2.21). The image will look very subdued in a sRGB
personal computer environment and with printers not compatible with
Design rule for Camera File System 2.0 (Exif 2.21). Post-processing of
the image with software will therefore be required.
C
If the captured still photo was shot in the Adobe RGB color space, the
first character in the file name will be an underscore “_”.
The ICC profile is not appended. See explanations about ICC profile in
the Software Instruction Manual in the CD-ROM.
92
Setting the AF and
Drive Modes
Y
P
O
The Area AF frame has 45 AF
points (39 high-precision crosstype points and 6 AF points). You
can select any one of the 45 AF
points to match your composition.
C
You can also select the AF mode and drive mode best
matching the shooting conditions and subject.
<f> stands for auto focus. <g> stands for manual focus.
93
E: Selecting the AF Mode
Select the AF mode suiting the shooting conditions or subject.
1
On the lens, set the focus mode
switch to <AF>.
the <o> button.
2 Press
(9)
the AF mode.
3 Select
While looking at the top LCD panel,
Y
P
O
turn the <6> dial.
X : One-Shot AF
Z : AI Servo AF
C
94
E: Selecting the AF Mode
One-Shot AF for Still Subjects
Suited for still subjects. When you
press the shutter button halfway, the
camera will focus only once.
AF point
Focus confirmation light
C
When focus is achieved, the AF point
which achieved focus will flash in red,
and the focus confirmation light <o>
in the viewfinder will also light.
With evaluative metering, the
exposure setting will be set at the
same time focus is achieved.
While you hold down the shutter
button halfway, the focus will be
locked. You can then recompose the
shot if desired.
AF is also possible by pressing the
<p> button.
Y
P
O
If focus cannot be achieved, the focus confirmation light <o> in the
viewfinder will blink. If this occurs, a picture cannot be taken even if the
shutter button is pressed completely. Recompose the picture and try to
focus again. Or see “When Autofocus Fails” (p.100).
If the [2 Beep] menu is set to [Off], the beeper will not sound when
focus is achieved (p.52).
Focus Lock
After achieving focus with One-Shot AF, you can lock the focus on a subject
and recompose the shot. This is called “focus lock.” This is convenient when
you want to focus a subject not covered by the Area AF frame.
95
E: Selecting the AF Mode
AI Servo AF for Moving Subjects
This AF mode is for moving subjects
when the focusing distance keeps
changing. While you hold down the
shutter button halfway, the subject
will be focused continuously.
The exposure is set at the moment
the picture is taken.
AF is also possible by pressing the
<p> button.
Focus Tracking with AI Servo AF
If the subject approaches or retreats from the camera at a constant rate,
the camera tracks the subject and predicts the focusing distance
immediately before the picture is taken. This is for obtaining correct
focus at the moment of exposure.
When the AF point selection is automatic (p.97), the camera first
uses the center AF point to focus. During autofocusing, if the subject
moves away from the center AF point, focus tracking continues as
long as the subject is covered by the Area AF frame.
With a manually selected AF point, the selected AF point will focus
track the subject.
C
Y
P
O
With AI Servo AF, the beeper will not sound even when focus is achieved.
Also, the focus confirmation light <o> in the viewfinder will not light.
96
S Selecting the AF Point
Select one of the 45 AF points to autofocus. Manual selection enables
you to select one of the 45 AF points. And automatic selection has
the camera automatically select one of the 45 AF points.
1
Press the <S> button. (9)
X The current AF point will be displayed
in the viewfinder.
the AF point.
2 Select
Use <9> or turn the <6> or <5>
dial.
Automatic selection:
AF
Manual selection
: SEL
(Center)
SEL AF (Off center)
Y
P
O
When the EF70-200mm f/2.8L USM is used with an Extender, use the
center AF point only. The other AF points may cause a focusing error.
When switching to a vertical AF point, two AF points might light up. In such a
case, shooting will proceed with the two AF points automatically selected.
With two AF points selected, when you switch to a left or right AF point, only
one AF point will be selected.
C
Selecting with the Multi-controller
The AF point selection will change in
the direction you tilt the <9>.
Pressing <9> straight down selects
the center AF point. Pressing it
straight down again sets it to
automatic AF point selection.
If all the peripheral AF points light up,
automatic AF point selection will take
effect.
97
S Selecting the AF Point
Selecting with the Dial
To select a horizontal AF point, turn
the <6> dial.
To select a vertical AF point, turn the
<5> dial.
If all the peripheral AF points light up,
automatic AF point selection will take
effect.
Y
P
O
With [8C.Fn III -10: Selectable AF point], the selectable AF points can
be limited to 19 or 11 AF points or to the inner or outer 9 AF points
(p.223).
With [8C.Fn III -8: AF expansion w/selected pt], you can change the
AF expansion to the left/right AF points, surrounding AF points, or all 45
AF points (p.222).
If you use a super telephoto lens equipped with an Image Stabilizer and
AF stop button, when [8C.Fn III -6: Lens AF stop button function] is
set to [7: Spot AF], spot AF will be possible (p.220).
By registering the AF point you use frequently, you can switch to it
instantly by setting C.Fn III -11-1/2 (p.224) or C.Fn III -6-6 (p.220).
If focus cannot be achieved with the external, EOS-dedicated Speedlite’s
AF-assist beam, select the center AF point.
C
Lens’ Maximum Aperture and AF Sensitivity
With the EOS-1D Mark IV, higher precision AF is possible with a
maximum aperture brighter than f/2.8 on a lens or when combined with
an Extender.
98
S Selecting the AF Point
Maximum f/stop: Up to f/2.8
[Manual selection]
With the 39 AF points indicated by , high-precision,
cross-type AF (both horizontal- and vertical-line
sensitive) is possible during manual AF point
selection. The cross-type sensors’ vertical-line
sensitivity is approx. two times higher than their
horizontal-line sensitivity. The remaining six AF
[Automatic selection]
points will be horizontal-line sensitive.
During automatic AF point selection, the number of
cross-type AF points will decrease from 39 points to the
19 points indicated with . The remaining 26 AF points
will be horizontal-line sensitive.
Maximum f/stop: f/4
High-precision, cross-type AF with the center AF point is possible. The
remaining 44 AF points will be horizontal-line sensitive only.
Y
P
O
Maximum f/stop: f/5.6 or f/8
With f/5.6 lenses, all the AF points will be horizontal-line sensitive only.
With f/8 lenses, AF will be possible with the center AF point being
horizontal-line sensitive only. AF will not work with the other AF points.
C
In the case of zoom lenses whose maximum aperture varies depending
on the lens focal length, the AF points will be horizontal-line sensitive only
(They will not work as cross-type points). However, with the EF28-80mm
f/2.8-4L USM lens, cross-type AF will work with the center AF point.
With the EF24mm f/2.8 or EF28mm f/2.8 lens, the three AF points on the
extreme left and right of the Area AF frame will be horizontal-line
sensitive (They will not work as cross-type points).
The following lenses and lens combinations have a maximum aperture of
f/4, but cross-type focusing on 39 AF points is still possible as with lenses
having an f/2.8 maximum aperture.
EF17-40mm f/4L USM, EF24-105mm f/4L IS USM,
EF70-200mm f/2.8L IS USM + Extender EF1.4X II,
EF200mm f/2L IS USM + Extender EF2X II,
EF300mm f/2.8L IS USM + Extender EF1.4X II,
EF400mm f/2.8L IS USM + Extender EF1.4X II
99
When Autofocus Fails
Autofocus can fail to achieve focus (the focus confirmation light <o>
blinks) with certain subjects such as the following:
Subjects difficult to focus
Very low-contrast subjects
(Example: Blue sky, solid-color walls, etc.)
Subjects in very low light
Extremely backlit or reflective subjects
(Example: Car with a highly reflective body, etc.)
Near and far subjects covered by an AF point
(Example: Animal in a cage, etc.)
Repetitive patterns
(Example: Skyscraper windows, computer keyboards, etc.)
In such cases, do one of the following:
(1) With One-Shot AF (p.95), focus an object at the same distance
as the subject and lock the focus before recomposing.
(2) Set the lens focus mode switch to <MF> and focus manually.
MF: Manual Focusing
C
Y
P
O
the lens focus mode switch to
1 Set
<MF>.
the subject.
2 Focus
Focus by turning the lens focusing
ring until the subject looks sharp in
the viewfinder.
During automatic AF point selection (p.97), if you hold down the shutter
button halfway and focus manually, the focus confirmation light <o> will
light when the center AF point achieves focus.
100
R: Selecting the Drive Mode
the <o> button.
1 Press
(9)
the drive mode.
2 Select
While looking at the top LCD panel,
turn the <5> dial.
u : Single shooting
When you press the shutter button completely, one shot will be
taken.
o : High-speed continuous shooting (Max. 10 shots per sec.)
p : Low-speed continuous shooting (Max. 3 shots per sec.)
In the o and p modes, the camera will shoot continuously
while you hold down the shutter button completely.
k : 10-sec. self-timer
l : 2-sec. self-timer
See the next page for the self-timer operation procedure.
6 : Silent single shooting
The shooting sound for single shooting is quieter than <u>. The
internal mechanical operation is not executed until you return the
shutter button to its halfway position.
C
Y
P
O
When the battery level is low, the drive mode icon <o/p/u> will
blink. If the <o> icon blinks, the continuous shooting speed will
decrease slightly.
In the AI Servo AF mode, the continuous shooting speed may become
slightly slower depending on the subject and the lens used.
101
j Using the Self-timer
the <o> button.
1 Press
(9)
either <k> or <l>.
2 Select
Look at the top LCD panel and turn the
<5> dial to select <k> or <l>.
k : 10-sec. self-timer
l : 2-sec. self-timer
picture.
3 TakeLookthethrough
the viewfinder, focus
the subject, then press the shutter
button completely.
X The self-timer lamp will blink, and 10 sec.
or 2 sec. later, the picture will be taken.
X The top LCD panel counts down the
seconds until the picture is taken.
X The lamp’s blinking will become faster
two seconds before the picture is taken.
C
Y
P
O
If you will not look through the viewfinder when you press the shutter button,
close the eyepiece shutter before shooting (p.117). If stray light enters the
viewfinder when the picture is taken, it may throw off the exposure.
Do not stand in front of the camera when you press the shutter button to
start the self-timer. Doing so prevents the camera from focusing the
subject.
Use a tripod when using the self-timer.
The <l> 2-sec. self-timer enables you to shoot while not touching the
camera mounted on a tripod. This prevents camera shake while you
shoot still lifes or bulb exposures.
To cancel the self-timer after it starts, set the power switch to <2>.
When using the self-timer for self-portraits, use focus lock for an object at
about the same distance as where you will be (p.95).
After taking self-timer shots, you should check the image for proper focus
and exposure (p.156).
102
Exposure Control
Y
P
O
Select the shooting mode to suit the subject or shooting
objective. You can set the shutter speed and/or aperture
to obtain the exposure you want.
Also, with an EX-series Speedlite, you can take flash
pictures as easily as shooting without flash.
C
First set the power switch to <J>.
103
q Selecting the Metering Mode
You can select one of four methods to measure the subject brightness.
1 Press the <Q> button. (9)
the metering mode.
2 Select
While looking at the top LCD panel,
turn the <6> dial.
q: Evaluative metering
w: Partial metering
r: Spot metering
e: Center-weighted average metering
q Evaluative metering
This is a general-purpose metering mode suited
even for backlit subjects. The camera sets the
exposure automatically to suit the scene.
Y
P
O
w Partial metering
C
Effective when the background is much brighter than the
subject due to backlighting, etc. The metering is weighted at
the center covering approx. 13.5% of the viewfinder area.
r Spot metering
This is for metering a specific spot of the subject or
scene. The metering is weighted at the center
covering approx. 3.8% of the viewfinder area.
e Center-weighted average metering
The metering is weighted at the center and then
averaged for the entire scene.
When [8C.Fn I -7: Spot meter. link to AF point] is set to [1: Enable (use
active AF point)] (p.210), spot metering can be linked to the AF points.
104
q Selecting the Metering Mode
Multi-Spot Metering
With multiple spot meter readings, you can see the relative exposure
levels of multiple areas in the picture and set the exposure to obtain the
desired result.
1 Set the metering mode to r spot metering.
2 Press the <I> button. (8)
Aim the spot metering circle over the area where you want a
relative exposure reading, then press the <I> button.
X On the right of the viewfinder, the relative exposure level will be
displayed for the spot meter reading taken. For the exposure, the
average of the spot meter readings will be set.
C
Y
P
O
While referring to the exposure level indicator’s three spot metering
marks, you can set the exposure compensation to set the final
exposure and obtain the desired result.
You can take up to eight spot meter readings for one picture.
The exposure setting obtained with multi-spot meter readings will be
canceled in the following cases:
• After taking the last spot meter reading, 16 seconds elapsed.
• You pressed the <W>, <o>, <Q>, <Z>, <S>, or
<O> button.
• After taking the picture, you let go of the shutter button.
When [8C.Fn I -7: Spot meter. link to AF point] is set to [1: Enable
(use active AF point)] (p.210), multi-spot metering is still possible.
105
d: Program AE
The camera automatically sets the shutter speed and aperture to suit
the subject’s brightness. This is called Program AE.
* <d> stands for Program.
* AE stands for Auto Exposure.
1
Set the shooting mode to <d>.
Press the <W> button and turn
the <6/5> dial to select <d>.
Y
P
O
the subject.
2 Focus
Look through the viewfinder and aim
the selected AF point over the subject.
Then press the shutter button halfway.
X The AF point which achieves focus
flashes in red, and the focus
confirmation light <o> in the
viewfinder’s bottom right lights. (in
One-Shot AF mode)
X The shutter speed and aperture will
be set automatically and displayed in
the viewfinder and on the top LCD
panel.
C
the shutter speed and
3 Check
aperture display.
A correct exposure will be obtained
as long as the shutter speed and
aperture display do not blink.
106
d: Program AE
the picture.
4 TakeCompose
the shot and press the
shutter button completely.
Y
P
O
If the “30"” shutter speed and the maximum
aperture blink, it indicates underexposure.
Increase the ISO speed or use flash.
C
If the “8000” shutter speed and the minimum
aperture blink, it indicates overexposure.
Lower the ISO speed or use an ND filter (sold
separately) to reduce the amount of light entering
the lens.
During automatic AF point selection (p.97) or manual AF point selection with
expanded AF points (p.222), multiple AF points might light up
simultaneously.
About Program Shift
In the Program AE mode, you can freely change the shutter speed and
aperture combination (Program) set automatically by the camera while
maintaining the same exposure. This is called Program shift.
To do this, press the shutter button down halfway, then turn the <6>
dial until the desired shutter speed or aperture value is displayed.
Program shift is canceled automatically after the picture is taken.
Program shift is not possible with flash.
107
s: Shutter-Priority AE
In this mode, you set the shutter speed and the camera automatically
sets the aperture to obtain the correct exposure suiting the brightness of
the subject. This is called shutter-priority AE. A faster shutter speed can
freeze the action or moving subject. Or a slower shutter speed can
create a blurred effect, giving the impression of motion.
* <s> stands for Time value.
Blurred motion
(Slow shutter speed)
1
Frozen action
(Fast shutter speed)
Y
P
O
Set the shooting mode to <s>.
Press the <W> button and turn
the <6/5> dial to select <s>.
C
the desired shutter speed.
2 SetWhile
looking at the top LCD panel,
turn the <6> dial.
the subject.
3 Focus
Press the shutter button halfway.
X The aperture is set automatically.
the viewfinder display and
4 Check
shoot.
As long as the aperture is not
blinking, the exposure will be correct.
108
s: Shutter-Priority AE
If the maximum aperture blinks, it indicates
underexposure.
Turn the <6> dial to set a slower shutter
speed until the aperture stops blinking or
set a higher ISO speed.
If the minimum aperture blinks, it indicates
overexposure.
Turn the <6> dial to set a faster shutter
speed until the aperture stops blinking or
set a lower ISO speed.
Y
P
O
Shutter Speed Display
The shutter speeds from “8000” to “4” indicate the denominator of the
fractional shutter speed. For example, “125” indicates 1/125 sec. Also, “0"5”
indicates 0.5 sec. and “15"” is 15 sec.
C
109
f: Aperture-Priority AE
In this mode, you set the desired aperture and the camera sets the
shutter speed automatically to obtain the correct exposure suiting the
subject brightness. This is called aperture-priority AE. A higher f/
number (smaller aperture hole) will make more of the foreground and
background fall within acceptable focus. On the other hand, a lower f/
number (larger aperture hole) will make less of the foreground and
background fall within acceptable focus.
* <f> stands for Aperture value (aperture opening).
Blurred background
(With a large aperture opening)
C
1
Y
P
O
Sharp foreground and background
(With a small aperture opening)
Set the shooting mode to <f>.
Press the <W> button and turn
the <6/5> dial to select <f>.
the desired aperture.
2 SetWhile
looking at the top LCD panel,
turn the <6> dial.
the subject.
3 Focus
Press the shutter button halfway.
X The shutter speed is set automatically.
the viewfinder display and
4 Check
shoot.
As long as the shutter speed is not
blinking, the exposure will be correct.
110
f: Aperture-Priority AE
If the “30"” shutter speed blinks, it indicates
underexposure.
Turn the <6> dial to set a larger aperture
(lower f/number) until the shutter speed
blinking stops or set a higher ISO speed.
If the “8000” shutter speed blinks, it
indicates overexposure.
Turn the <6> dial to set a smaller
aperture (higher f/number) until the shutter
speed blinking stops or set a lower ISO
speed.
Aperture Display
The higher the f/number, the smaller the aperture opening will be. The
apertures displayed will differ depending on the lens. If no lens is attached to
the camera, “00” will be displayed for the aperture.
C
Depth-of-Field Preview
Y
P
O
Press the depth-of-field preview button
to stop down the lens to the current
aperture setting. You can check the
depth of field (range of acceptable focus)
through the viewfinder.
A higher f/number will make more of the foreground and background fall
within acceptable focus. However, the viewfinder will look darker.
If the depth of field is difficult to discern, hold down the depth-of-field
preview button while turning the <6> dial. The depth of field can be
clearly seen with the Live View image (p.126).
The exposure will be locked (AE lock) while the depth-of-field preview
button is pressed.
111
a: Manual Exposure
In this mode, you set both the shutter speed and aperture as desired. To
determine the exposure, refer to the exposure level indicator in the
viewfinder or use a commercially-available exposure meter. This
method is called manual exposure.
* <a> stands for Manual.
1
Shutter speed
Aperture
Set the shooting mode to <a>.
Press the <W> button and turn
the <6/5> dial to select <a>.
the shutter speed and
2 Set
aperture.
To set the shutter speed, turn the <6>
dial while looking at the top LCD panel.
To set the aperture, set the power
switch to <J> and turn the <5> dial
while looking at the top LCD panel.
You can also set it by pressing the <O>
button, then turning the <6/5> dial.
C
Y
P
O
the subject.
3 Focus
Press the shutter button halfway.
X The exposure setting will be displayed.
On the right of the viewfinder, the
exposure level indicator <s> indicates
the current exposure level relative to
the standard exposure index <a>.
the exposure.
4 SetCheck
the exposure level and set the
desired shutter speed and aperture.
5
Take the picture.
If [8C.Fn II -4: Auto Lighting Optimizer] (p.81) is set to a setting other
than [3: Disable], the image may still look bright even if a darker exposure
has been set.
112
O Exposure Compensation
Exposure compensation can increase (brighter) or decrease (darker)
the standard exposure set by the camera.
You can set the exposure compensation up to ±3 stops in 1/3-stop
increments.
Exposure compensation can be set in the <d/s/f> shooting modes.
1
Increased exposure
Decreased exposure
Check the exposure.
Press the shutter button halfway and
check the exposure level indicator.
the exposure compensation
2 Set
amount.
Set the power switch to <J>, and
while looking at the viewfinder or top
LCD panel, turn the <5> dial.
Turn the <5> dial while pressing the
shutter button halfway or within (9)
after pressing the shutter button halfway.
X When exposure compensation has
been set, the <y> icon will be
displayed in the viewfinder.
To cancel exposure compensation, set the
exposure level indicator <s> to the
standard exposure index (<a> or <C>).
C
Y
P
O
3 Take the picture.
If [8C.Fn II -4: Auto Lighting Optimizer] (p.81) is set to a setting other
than [3: Disable], the image may still look bright even if the exposure
compensation is decreased.
The exposure compensation amount will remain in effect even after you
set the power switch to <2>.
Be careful not to turn the <5> dial and change the exposure compensation
inadvertently. To prevent this, set the power switch to <1>.
You can also set it by pressing the <O> button and turning the <6/5> dial.
113
h Auto Exposure Bracketing (AEB)
By changing the shutter speed or aperture automatically, the camera
brackets the exposure up to ±3 stops in 1/3-stop increments for three
successive shots. This is called AEB.
* AEB stands for Auto Exposure Bracketing.
1
Hold down the <W> and
<o> buttons
simultaneously. (9)
X The <h> icon and “0.0” will appear
on the top LCD panel.
the AEB amount.
2 SetTurn
the <6/5> dial to set the
AEB amount.
“1.0” is the AEB increment, and <N>
is the AEB amount.
Y
P
O
picture.
3 TakeIn thethecurrent
drive mode, the pictures
C
Standard Decreased Increased
exposure exposure exposure
will be taken in this sequence:
Standard exposure, decreased
exposure, and increased exposure.
After the three bracketed shots are taken,
AEB will not be canceled. To cancel AEB,
set the AEB increment to “0.0”.
During AEB shooting, the <w> icon in the viewfinder and the <h> icon
on the top LCD panel will blink.
The AEB setting will be canceled automatically if the power switch is set
to <2> or if the flash is ready.
AEB will not work with bulb exposures nor with flash.
If the drive mode is set to <u> or <6>, you must press the shutter button
three times. If <o> or <p> is set and you hold down the shutter
button completely, the three bracketed shots will be taken continuously.
Then the camera will stop shooting. When <k> or <l> is set, the three
bracketed shots will be taken continuously after a 10-sec. or 2-sec. delay.
AEB can also be combined with exposure compensation.
114
A AE Lock
Use AE lock when the area of focus is to be different from the exposure
metering area or when you want to take multiple shots at the same
exposure setting. Press the <A> button to lock the exposure, then
recompose and take the shot. This is called AE lock. It is effective for
backlit subjects.
1
Focus the subject.
Press the shutter button halfway.
X The exposure setting will be displayed.
the <w> button. (9)
2 Press
X The <w> icon will light in the
viewfinder and the exposure setting
will be locked (AE lock).
Each time you press the <A> button,
it locks the current auto exposure
setting.
Y
P
O
and take the picture.
3 Recompose
The exposure level indicator on the
C
right of the viewfinder will show the
AE lock exposure level and the
current exposure level in real-time.
If you want to maintain the AE lock
while taking more shots, hold down
the <A> button and press the shutter
button to take another shot.
AE Lock Effects
Metering
Mode
(p.104)
q*
wre
AF Point Selection Method (p.97)
Automatic Selection
AE lock is applied at the AF
point that achieved focus.
Manual Selection
AE lock is applied at the
selected AF point.
AE lock is applied at the center AF point.
* When the lens’ focus mode switch is set to <g>, AE lock is applied at the
center AF point.
115
Bulb Exposures
When bulb is set, the shutter stays open as long as you hold down the
shutter button completely, and closes when you let go of the shutter
button. This is called bulb exposure. Use bulb exposures for night
scenes, fireworks, the heavens, and other subjects requiring long
exposures.
1
Set the shooting mode to <buLb>.
Press the <W> button and turn
the <6/5> dial to select <buLb>.
the desired aperture.
2 SetWhile
looking at the top LCD panel,
turn the <6/5> dial.
(1)
(2)
(3)
3
Take the picture.
Y
P
O
Press the shutter button completely.
X The elapsed exposure time will be
displayed on the top LCD panel.
1: min., 2: sec., 3: hour
C
Since bulb exposures produce more noise than usual, the image might look
a little grainy.
When [8C.Fn II -1: Long exp. noise reduction] is set to [1: Auto] or
[2: On], noise generated by the bulb exposure can be reduced (p.214).
For bulb exposures, using the Remote Switch RS-80N3 or Timer Remote
Controller TC-80N3 (both sold separately) is recommended.
U LCD Panel Illumination
Press the <U> button to turn on (9)/
off the illumination of the top/rear LCD
panel.
During a bulb exposure, pressing the
shutter button completely will turn off the
LCD panel illumination.
116
Bulb Exposures
Using the Eyepiece Shutter
If you take a picture without looking at
the viewfinder, light entering the
eyepiece can throw off the exposure. To
prevent this, slide the eyepiece shutter
lever as shown by the arrow to shutter
the eyepiece.
You need not shutter the eyepiece during
Live View shooting or movie shooting.
Connecting the Remote Switch
You can connect Remote Switch RS-80N3 or Timer Remote Controller
TC-80N3 (both sold separately) or any EOS accessory equipped with
an N3-type terminal to the camera and shoot with it.
To operate the accessory, refer to its instruction manual.
Y
P
C21 O
Open the terminal cover.
Open the upper terminal cover.
Connect the plug to the remote
control terminal.
Connect the plug as shown in the
illustration.
To disconnect the plug, grasp the
plug’s silver part and pull out.
117
2 Mirror Lockup
Although using the self-timer or Remote Switch can prevent camera
shake, using mirror lockup to prevent camera vibrations (mirror shock)
can also help when you use a super telephoto lens or shoot close ups
(macro photography).
When [8C.Fn III -17: Mirror lockup] is set to [1: Enable] or [2:
Enable: Down with SET] (p.226), shooting with mirror lockup is
possible.
1 Focus the subject, press the shutter button completely
and let go of it.
X The mirror will lockup and <2> will blink on the top LCD panel.
2 Press the shutter button completely again.
X The picture will be taken.
With [1] set, the mirror will go back down when the picture is taken.
With [2] set, the mirror lockup will remain even after the picture is
taken. To cancel the mirror lockup, press <0>.
C
Y
P
O
In very bright light such as at the beach or a ski slope on a sunny day,
take the picture promptly after mirror lockup.
During mirror lockup, do not point the camera lens at the sun. The sun’s
heat can scorch and damage the shutter curtains.
If you use bulb exposures, the self-timer, and mirror lockup in
combination, keep pressing the shutter button completely (self-timer
delay time + bulb exposure time). If you let go of the shutter button
during the self-timer countdown, there will be a shutter-release sound but
no picture is actually taken.
When [1: Enable] is set, single shooting will take effect even if the drive
mode is set to continuous. When [2: Enable: Down with SET] is set, the
current drive mode will take effect for the shooting.
When the self-timer is set to <k> or <l>, the picture will be taken
after 10 sec. or 2 sec. respectively.
The mirror locks up, and after 30 seconds, it will go back down automatically.
Pressing the shutter button completely again locks up the mirror again.
For mirror lockup shots, using the Remote Switch RS-80N3 or Timer
Remote Controller TC-80N3 (both sold separately) is recommended.
118
D Flash Photography
EOS-dedicated, EX-series Speedlites
An EX-series Speedlite (sold separately) makes flash photography as
easy as shooting without flash.
For detailed instructions, see the EX-series Speedlite’s instruction
manual. This camera is a Type-A camera that can use all the features
of EX-series Speedlites.
To set the flash functions and flash Custom Functions with the camera’s
menu, see pages 121-124.
Shoe-mount Speedlites
Y
P
O
Macro Lites
FE lock
This enables you to attain a proper flash exposure for a specific part
of the subject. Aim the viewfinder center over the subject, then press
the <I> button and take the picture.
C
Flash exposure compensation
In the same way as normal exposure compensation, you can set
exposure compensation for flash. You can set flash exposure
compensation up to ±3 stops in 1/3-stop increments.
Press the camera’s <Q> button, then turn the <5> dial while
looking at the top LCD panel or viewfinder.
If [8C.Fn II -4: Auto Lighting Optimizer] (p.81) is set to a setting other
than [3: Disable], the image may still look bright even if a darker flash
exposure has been set.
If the camera has difficulty autofocusing, the EOS-dedicated, external
Speedlite may automatically emit the AF-assist beam.
119
D Flash Photography
Using Non-EX-series Canon Speedlites
With an EZ/E/EG/ML/TL-series Speedlite set in TTL or A-TTL
autoflash mode, the flash can be fired at full output only.
Set the camera’s shooting mode to <a> (manual exposure) or
<f> (aperture-priority AE) and adjust the aperture setting before
shooting.
When using a Speedlite which has manual flash mode, shoot in the
manual flash mode.
Using Non-Canon Flash Units
Sync Speed
The camera can synchronize with compact, non-Canon flash units at 1/300
sec. or 1/250 sec. or slower. With large studio flash units, since the flash
duration is longer than compact flash units, set the sync speed within 1/125
sec. to 1/30 sec. Be sure to test the flash synchronization before shooting.
PC Terminal
C
Y
P
O
The camera’s PC terminal can be
used with flash units having a sync
cord. The PC terminal is threaded to
prevent inadvertent disconnection.
The camera’s PC terminal has no
polarity. You can connect any sync
cord regardless of its polarity.
If the camera is used with a flash unit or flash accessory dedicated to
another camera brand, the camera may not operate properly and
malfunction may result.
Do not connect to the camera’s PC terminal any flash unit requiring 250 V
or more.
Do not attach a high-voltage flash unit on the camera’s hot shoe. It might
not fire.
A flash unit attached to the camera’s hot shoe and a flash unit connected to
the PC terminal can both be used at the same time.
120
3 Setting the Flash
When an EX-series Speedlite (such as the 580EX II, 430EX II, and
270EX) settable by the camera is attached, you can use the camera’s
menu screen to set the Speedlite’s flash function settings and Custom
Functions. First attach the Speedlite to the camera and turn on the
Speedlite.
Setting Flash Functions
1
Select [External Speedlite
control].
Under the [2] tab, select [External
Speedlite control], then press <0>.
Y
P
O
[Flash function settings].
2 Select
Turn the <5> dial to select [Flash
C3
function settings], then press <0>.
Set the flash function settings.
Turn the <5> dial to select a flash
function and set it as desired.
The procedure is the same as setting
a menu function.
If you press the <B> button in step 3, you can revert the settings to
the default.
With an EX-series Speedlite not settable with the camera, only [Flash
exp. comp], [E-TTL II], and [Flash firing] are settable under [Flash
function settings].
(Certain EX-series Speedlites also enable [Shutter sync.] to be set.)
121
3 Setting the Flash
Functions settable under [Flash function settings]
On the screen, the settable functions and what’s displayed will
differ depending on the Speedlite, current flash mode, flash
Custom Function settings, etc.
To see which functions your Speedlite provides, refer to the Speedlite’s
instruction manual.
Flash mode
With an external Speedlite, you can select the flash mode to suit
your flash shooting.
[E-TTL II] is the standard mode of
EX-series Speedlites for automatic
flash shooting.
[Manual flash] is for users who want
to set the [Flash output] (1/1 to 1/
128) themselves.
[MULTI flash] is for users who want
to set the [Flash output],
[Frequency], and [Flash count]
themselves.
For [TTL], [AutoExtFlash], and
[Man.ExtFlash], refer to the instruction
manual of the Speedlites which
provide the respective flash mode.
C
Y
P
O
Shutter sync.
Normally, set this to [1st curtain] so that the flash fires immediately
after the exposure starts.
If [2nd curtain] is set, the flash will fire right before the shutter closes.
When this is combined with a slow sync speed, you can create a trail
of light such as from car headlights at night. With 2nd curtain sync,
two flashes will be fired: Once when you press the shutter button
completely, and once immediately before the exposure ends.
If [Hi-speed] is set, the flash can be used with all shutter speeds.
This is especially effective for portraits using fill flash when you want
to give priority to the aperture setting.
122
3 Setting the Flash
FEB
While the flash output is changed automatically, three flash shots are
taken. For details, see the instructions for FEB (Flash Exposure
Bracketing) in your Speedlite’s instruction manual.
Flash exposure compensation
The same setting as “Flash exposure compensation” on page 119
can be done.
E-TTL II
For normal flash exposures, set it to [Evaluative].
If [Average] is set, the flash exposure will be averaged for the entire
metered scene as with an external metering flash. Since flash
exposure compensation may be necessary depending on the scene,
this setting is for advanced users.
Zoom
You can adjust the Speedlite’s flash coverage. Normally, set this to
[Auto] so that the camera will automatically set the flash coverage to
match the lens focal length.
C
Y
P
O
Wireless setting
Wireless flash (with multiple flash units) is possible. For details, see
your Speedlite’s instruction manual about wireless flash.
Flash firing
To enable flash photography, set [Enable]. To enable only the AFassist beam to be emitted, set [Disable].
When using 2nd-curtain sync, set the shutter speed to 1/50 sec. or slower. If
the shutter speed is 1/60 sec. or faster, 1st-curtain sync will be applied even
if [2nd curtain] is set.
If flash exposure compensation has already been set with the Speedlite,
you cannot use the camera’s <Q> button or Flash function settings
menu to set flash exposure compensation. If it is set with both the
camera and Speedlite, the Speedlite’s setting overrides the camera’s.
The flash function’s [E-TTL II] setting will work together with C.Fn II -5
(p.215). And [Flash firing] will work with C.Fn II -7 (p.216).
123
3 Setting the Flash
Flash C.Fn Settings
1 Select [Flash C.Fn settings].
Turn the <5> dial to select [Flash C.Fn settings], then press <0>.
2 Set the flash function.
Turn the <5> dial to select the function number, then set the function. The
procedure is the same as setting the camera’s Custom Functions (p.204).
Canceling Speedlite Custom Function Settings
In step 1, select [Clear all Speedlite C.Fn’s] to clear all the Speedlite’s
Custom Function settings (except [C.Fn -0: Distance indicator display]).
If you use an EX-series Speedlite and the Speedlite Custom Function’s [Flash
metering mode] is set to [TTL], the flash will always be fired at full output.
C
Y
P
O
Metered Manual Flash Exposure
This is for close-up flash photography when you want to set the flash level
manually. Use an 18% gray card and an EX-series Speedlite which has
manual flash mode. Follow the instructions below:
1. Set the camera and Speedlite settings.
• Set the camera’s shooting mode to <a> or <f>.
• Set the Speedlite to manual flash mode.
2. Focus the subject.
• Focus manually.
3. Set up the 18% gray card.
• Place the gray card at the subject’s position.
• In the viewfinder, the entire spot metering circle at the center should
cover the gray card.
4. Press the <I> button. (8)
5. Set the flash exposure level.
• Adjust the Speedlite’s manual flash level and the camera aperture so
that the flash exposure level aligns with the standard exposure index.
6. Take the picture.
• Remove the gray card and take the picture.
124
Live View Shooting
Y
P
O
You can shoot while viewing the image on the camera’s
LCD monitor. This is called “Live View shooting.”
Live View shooting is effective for still subjects which do
not move.
If you handhold the camera and shoot while viewing the
LCD monitor, camera shake can cause blurred images.
Using a tripod is recommended.
C
About Remote Live View Shooting
With EOS Utility (provided software) installed in your computer, you
can connect the camera to the computer and shoot remotely while
viewing the computer screen. For details, see the Software
Instruction Manual in the CD-ROM.
125
z Preparing for Live View Shooting
This sets the camera for Live View shooting of still photos. To shoot
movies, see page 141.
1
Select [Live View/Movie func.
set.].
Under the [6] tab, select [Live View/
Movie func. set.], then press <0>.
[LV z/k set.].
2 Select
Turn the <5> dial to select [LV z/
k set.], then press <0>.
“LV” stands for Live View.
Y
P
O
[Stills].
3 Select
Turn the <5> dial to select [Stills],
C
4
then press <0>.
Exit the menu.
Press the <M> button or press
the shutter button halfway to turn off
the menu screen.
the Live View image.
5 Display
Press <0>.
X The Live View image will appear on
the LCD monitor.
The displayed image brightness will
be close to the actual brightness of
the resulting image.
If the standard exposure has not been
obtained, turn the <6/5> dial.
126
z Live View Shooting
1
Select the shooting mode.
Press the <W> button and turn
the <6/5> dial to select the
shooting mode.
the subject.
2 Focus
Before shooting, focus with AF or
manual focus (p.131-138).
When you press the shutter button
halfway, the camera will focus with
the current AF mode.
Y
P
O
the picture.
3 TakePress
the shutter button completely.
X The picture will be taken and the captured
image is displayed on the LCD monitor.
X After the image review ends, the
camera will return to Live View
shooting automatically.
Press <0> to end the Live View
shooting.
C
During Live View shooting, do not point the lens toward the sun. The
sun’s heat can damage the camera’s internal components.
Cautions for using Live View shooting are on pages 139-140.
You can also focus by pressing the <p> button.
The image’s field of view is approx. 100%.
When you press the shutter button completely, the shutter will sound like
two shots have been taken, but only one shot will be taken. For flash
shots, the reflex mirror and shutter will also make multiple sounds, but
only one shot will be taken. During continuous shooting, only the first
shot will make two shutter sounds.
127
z Live View Shooting
B About the Information Display
Each time you press the <B> button, the information display will change.
AF point (d)
Image size
Histogram
White balance
AEB
Picture Style
FEB
Auto Lighting
Optimizer
• : Standard
• : Low
• : Strong
• : Disable
g: Exposure
simulation
E: Standard
brightness
Battery check
Highlight tone priority
AE lock
Flash-ready
Aperture
Drive mode
Y
P
O
ISO speed
Shots remaining
Shutter speed
Flash exposure compensation
C
Exposure level indicator
Upper indicator: Exposure level/AEB range
Lower indicator: Flash exposure level/FEB range
AF mode
•d : Live mode
•c : Face detection Live mode
•f: Quick mode
The histogram can be displayed when [Expo. simulation: Enable]
(p.130) has been set.
By setting [8C.Fn IV -15: Add aspect ratio information] to setting 1 to
6, you can shoot with the same framing as with a medium- or largeformat film camera such as 6x6cm, 6x4.5cm, and 4x5 inch. Vertical lines
matching the set aspect ratio will be displayed (p.234).
When <g> is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
If <g> is blinking, it indicates that the Live View image is not being
displayed at the suitable brightness due to low or bright light conditions.
However, the actual image recorded will reflect the exposure setting.
If flash is used or bulb is set, the <g> icon and histogram will be
grayed out (for your reference). The histogram might not be properly
displayed in low- or bright-light conditions.
128
Shooting Function Settings
As with normal shooting through the viewfinder, while the Live View
image is displayed, you can still use the camera buttons to change
settings and playback images.
Pressing the <W> <o>
<y> <Z> <O> <A> button will
display the setting screen on the LCD
monitor. To change the setting, turn
the <6> or <5> dial.
When you press the <B> button, turn the <6> dial to set the
card and turn the <5> dial to set the image size or white balance
while looking at the rear LCD panel.
The metering mode is fixed to evaluative metering for Live View shooting.
Pressing the <A> button will lock the exposure for 16 sec.
To check the depth of field, press the depth-of-field preview button.
During continuous shooting, the exposure set for the first shot will
also be applied to subsequent shots.
C
Y
P
O
Possible Shots During Live View Shooting
Temperature
At 23°C / 73°F
At 0°C / 32°F
Possible shots
Approx. 270
Approx. 230
The figures above are based on a fully-charged Battery Pack LP-E4 and CIPA
(Camera & Imaging Products Association) testing standards.
Continuous Live View shooting is possible for approx. 3 hr. at 23°C/73°F or
2 hr. 50 min. at 0°C/32°F (with fully-charged Battery Pack LP-E4).
Even during the Live View image display, image playback is possible by
pressing <x>.
If the camera is not operated for a prolonged period, the power will turn
off automatically as set with [5 Auto power off] (p.52). If [5 Auto
power off] is set to [Off], the Live View shooting will stop automatically
after approx. 30 min. (camera power remains on).
You can also autofocus by pressing the release button halfway on Remote
Switch RS-80N3 or Timer Remote Controller TC-80N3 (both sold separately).
With the stereo AV cable (provided) or HDMI cable (sold separately), the
Live View image can be displayed on a TV (p.170-171).
129
3 Menu Function Settings
During the Live View display, you can still set the menu options. Live
View functions are listed below.
Under the [6] tab with the [Live View/
Movie func. set.] screen, you can set
the following functions.
AF mode (p.131-137)
You can select [Live mode], [u Live mode], or [Quick mode].
Grid display
With [Grid 1l] or [Grid 2m], you can display grid lines. You can
check the camera tilt before shooting.
Y
P
O
Exposure simulation
• Enable (g)
The displayed image brightness will be close to the actual
brightness (exposure) of the resulting image. If you set exposure
compensation, the image brightness will change accordingly.
• Disable (E)
The image is displayed at the standard brightness to make the Live
View image easy to see.
C
Metering timer
You can change how long the exposure setting is displayed (AE lock
time).
If you select [1 Custom WB regist.], [2 Dust Delete Data], [7 Save/
load settings on media], [7 Regist/apply basic settings], [7 Sensor
cleaning], [7 Clear all camera settings], or [7 Firmware Ver.], the Live
View shooting will be terminated.
130
Using AF to Focus
Selecting the AF Mode
The AF modes available are [Live mode], [u Live mode] (face
detection, p.132), and [Quick mode] (p.136).
If you want to achieve precise focus, set the lens focus mode switch to
<MF>, magnify the image, and focus manually (p.138).
Select the AF mode.
While the Live View image is
displayed, press the <o>
button. (9)
Turn the <6> dial to select the AF
mode.
d : Live mode
c : u Live mode
f : Quick mode
Y
P
O
This can also be set with the AF mode menu option explained on the
preceding page.
Live Mode: d
C
The image sensor is used to focus. Although AF is possible with the
Live View image displayed, the AF operation will take longer than
with the Quick mode. Also, achieving focus may be more difficult than
with the Quick mode.
1
AF point
Move the AF point.
Use <9> to move the AF point < >
to where you want to focus.
(It cannot go to the edges of the
picture.)
If you press <9> straight down, the
AF point will return to the image
center.
131
Using AF to Focus
the subject.
2 Focus
Aim the AF point over the subject and
press the shutter button halfway.
X When focus is achieved, the AF point
will turn green and the beeper will
sound.
X If focus is not achieved, the AF point
will turn orange.
the picture.
3 TakeCheck
the focus and exposure, then
press the shutter button completely to
take the picture (p.127).
C
Y
P
O
u (Face detection) Live Mode: c
With the same AF method as the Live mode, human faces are detected
and focused. Have the target person face the camera.
1
Point the camera toward the
subject.
When a face is detected, a <p>
frame will appear over the face to be
focused.
If multiple faces are detected, <q>
will be displayed. Use <9> to move
the <q> frame over the target face.
132
Using AF to Focus
the subject.
2 Focus
Press the shutter button halfway and
the camera will focus the face
covered by the <p> frame.
X When focus is achieved, the AF point
will turn green and the beeper will
sound.
X If focus is not achieved, the AF point
will turn orange.
If a face cannot be detected, the AF
point < > will be displayed and AF
will be executed at the center.
the picture.
3 TakeCheck
the focus and exposure, then
Y
P
O
press the shutter button completely to
take the picture (p.127).
C
If the focus is way off, face detection will not be possible. If the lens
enables manual focusing even while the lens focus mode switch is set to
<f>, turn the focusing ring to attain rough focus. The face will then be
detected and <p> will be displayed.
An object other than a human face might be detected as a face.
Face detection will not work if the face is very small or large in the
picture, too bright or too dark, titled horizontally or diagonally, or partially
hidden.
The <p> focusing frame might cover only part of the face.
133
Using AF to Focus
When you press <9> straight down, it will switch to the Live mode
(p.131). You can tilt <9> to move the AF point. If you press <9>
straight down again, it will switch back to u (face detection) Live mode.
Since AF is not possible with a face detected near the edge of the
picture, the <p> will be grayed out. Then if you press the shutter button
halfway, the center AF point < > will be used to focus.
Live Mode and u (Face Detection) Live Mode Notes
AF operation
Focusing will take slightly longer.
Even when focus has been achieved, pressing the shutter button
halfway will focus again.
The image brightness may change during and after the AF
operation.
If the light source changes while the Live View image is displayed,
the screen might flicker and focusing can be difficult. If this happens,
stop the Live View shooting and autofocus under the actual light
source first.
If you press the <u> button in the Live mode, the AF point area will
be magnified. If focusing is difficult in the magnified view, return to
the normal view and autofocus. Note that the AF speed may differ
between the normal and magnified views.
If you autofocus in the Live mode’s normal view and then magnify
the image, the focus might be off.
If you shoot a peripheral subject and the target subject is slightly out
of focus, aim the center AF point over the subject to focus, then take
the picture.
In the u Live mode, pressing the <u> button will not magnify the
image.
The external Speedlite will not emit the AF-assist beam.
C
134
Y
P
O
Using AF to Focus
Shooting conditions which can make focusing difficult:
Low-contrast subjects such as the blue sky and solid-color, flat
surfaces.
Subjects in low light.
Stripes and other patterns where there is contrast only in the
horizontal direction.
Under a light source whose brightness, color, or pattern keeps
changing.
Night scenes or points of light.
Under fluorescent lighting or when the image flickers.
Extremely small subjects.
Subjects at the edge of the picture.
Subjects strongly reflecting light.
The AF point covers both a near and faraway subject (such as an
animal in a cage).
Subjects which keep moving within the AF point and cannot keep
still due to camera shake or subject blur.
A subject approaching or moving away from the camera.
Autofocusing while the subject is way out of focus.
Soft focus effect is applied with a soft focus lens.
A special effects filter is used.
C
Y
P
O
135
Using AF to Focus
Quick Mode: f
The dedicated AF sensor is used to focus in the One-Shot AF mode
(p.95), using the same AF method as with viewfinder shooting.
Although you can focus the target area quickly, the Live View image
will be interrupted momentarily during the AF operation.
1
Select the AF point.
Press the <o> button, then
use <9> to select the AF point.
The AF point selection will change in
the direction you tilt the <9>.
Pressing <9> straight down selects
the center AF point. Pressing it
straight down again sets it to
automatic AF point selection.
If all the peripheral AF points light up,
automatic AF point selection will take
effect.
C
Y
P
O
If you press the <o> button
or when (9) elapse, the AF point
selected on the screen will be
displayed.
(If automatic AF point selection has
been set, no AF point will be
displayed.)
136
Using AF to Focus
the subject.
2 Focus
Aim the AF point over the subject and
press the shutter button halfway.
X The Live View image will turn off, the
reflex mirror will go back down, and
AF will be executed.
X When focus is achieved, the beeper
will sound and the AF point will be
displayed in red. (If automatic AF
point selection has been set, the AF
point which achieves focus will flash
in red.)
X The Live View image will
automatically reappear.
AF point
Magnifying frame
Y
P
O
the picture.
3 TakeCheck
the focus and exposure, then
C
press the shutter button completely to
take the picture (p.127).
You cannot take a picture during autofocusing. Take the picture only while
the Live View image is displayed.
137
Focusing Manually
You can magnify the image and focus precisely manually.
1
Set the lens focus mode switch to
<MF>.
Turn the lens focusing ring to focus
roughly.
the magnifying frame.
2 Move
Use <9> to move the magnifying
Magnifying frame
frame to the position where you want
to focus.
Pressing <9> straight down will
return the magnifying frame to the
image center.
Y
P
O
the image.
3 Magnify
Press the <u> button.
X The image within the magnifying
frame will be magnified.
Each time you press the <u> button,
the view will change as follows:
C
5x
10x
Normal view
manually.
4 Focus
While looking at the magnified image,
AE lock
Magnified area position
Magnification
turn the lens focusing ring to focus.
After achieving focus, press the <u>
button to return to the normal view.
the picture.
5 TakeCheck
the focus and exposure, then
press the shutter button to take the
picture (p.127).
138
Live View Shooting Cautions
Notes About the Live View Image
Under low or bright light conditions, the Live View image might not reflect
the brightness of the captured image.
If the light source within the image changes, the screen might flicker. If
this happens, stop and resume the Live View shooting under the actual
light source to be used.
If you point the camera in a different direction, it might throw off the Live
View image’s correct brightness momentarily. Wait until the brightness
level stabilizes before shooting.
If there is a very bright light source in the picture, such as the sun, the
bright area might appear black on the LCD monitor. However, the actual
captured image will correctly show the bright area.
In low light, if you set the [6 LCD brightness] to a bright setting,
chrominance noise may appear in the Live View image. However, the
chrominance noise will not be recorded in the captured image.
When you magnify the image, the image sharpness may look more
pronounced than it really is.
Y
P
O
About the <E> icon
If Live View shooting is used under direct sunlight or in other hot
environments, the <E> icon (warning for the camera’s high internal
temperature) may appear on the screen. If you continue the Live View
shooting, the image quality might degrade. You should turn off the power
and allow the camera to rest for a while.
If Live View shooting continues while the <E> warning icon is displayed
and the camera’s internal temperature increases, the Live View shooting
will stop automatically. Live View shooting will be disabled until the
camera’s internal temperature decreases.
C
139
Live View Shooting Cautions
Notes About the Shooting Results
When you shoot with the Live View function at high ISO speeds, noise
(horizontal banding, dots of light, etc.) or irregular colors may appear.
When you shoot continuously with the Live View function for a long
period, the camera’s internal temperature may increase and it can
degrade image quality. Terminate Live View shooting when not shooting
images.
Before taking a long exposure, stop Live View shooting temporarily and
wait several minutes before shooting. This is to prevent image
degradation.
When you playback an image shot at high ISO speeds, noise or irregular
colors may appear.
If you take the picture during magnified view, the exposure might not
come out as desired. Return to the normal view before taking the picture.
During the magnified view, the shutter speed and aperture will be
displayed in red. Even if you take the picture during magnified view, the
image will be captured in the normal view.
Y
P
O
Custom Function Notes
During Live View shooting, certain Custom Function settings will be
disabled (p.205-207).
If [8C.Fn II -4: Auto Lighting Optimizer] (p.81) is set to a setting other
than [3: Disable], the image may look bright even if manual exposure,
exposure compensation, or flash exposure compensation has been set
to make the exposure darker.
C
Notes About Lenses and Flash
The focus preset feature on super telephoto lenses cannot be used.
FE lock and modeling flash will not work if an external Speedlite is used.
140
Shooting Movies
Y
P
O
The Live View image can be recorded to the card as a
movie. A movie can be shot with automatic exposure or
manual exposure. The movie recording format will be
MOV.
C
Cards which can record movies
When shooting movies, use a large-capacity card with a fast
writing/reading speed. The CF card’s speed should be 8MB/
sec. or higher. And the SD card should be rated SD Speed
Class 6 “
” or higher.
If you use a slow-writing card when shooting movies, the movie might
not be recorded properly. And if you playback a movie on a card
having a slow reading speed, the movie might not playback properly.
To check the card’s read/write speed, refer to the card
manufacturer’s Web site.
About Full HD 1080
Full HD 1080 indicates compatibility with HighDefinition featuring 1080 vertical pixels (scanning
lines).
141
k Preparing to Shoot Movies
Set the camera to record the Live View image as a movie. To shoot still
photos, see page 125.
1
Select [Live View/Movie func. set.].
Under the [6] tab, select [Live View/
Movie func. set.], then press <0>.
[LV z/k set.].
2 Select
Turn the <5> dial to select [LV z/
k set.], then press <0>.
“LV” stands for Live View.
[Movies].
3 Select
Turn the <5> dial to select [Movies],
Y
P
O
then press <0>.
rec. size].
4 SetFor[Movie
details on [Movie rec. size], see
C
5
page 151.
Exit the menu.
Press the <M> button or press
the shutter button halfway to turn off
the menu screen.
the Live View image.
6 Display
Press <0>.
X The Live View image will appear on
the LCD monitor.
A semi-transparent mask will appear
on the top/bottom or right/left. The
image area surrounded by the
masking will be recorded as the movie.
In <a> shooting mode, turn the
<6/5> dial to adjust the brightness.
142
k Shooting Movies
Autoexposure Shooting
When the shooting mode is set to a shooting mode other than
<a>, autoexposure control will take effect to fit the scene current
brightness. Autoexposure control will be the same for all shooting
modes.
1
Set a shooting mode other than
<a>.
Press the <W> button and turn
the <6/5> dial to select a
shooting mode other than <a>.
Y
P
O
the subject.
2 Focus
Before shooting a movie, focus with
C
AF or manual focus (p.131-138).
When you press the shutter button
halfway or press the <p>
button, the camera will focus with the
current AF mode.
the movie.
3 Shooting
Press the <I> button.
Recording movie
X The movie shooting will begin. While
the movie is being shot, the “o” mark
will be displayed on the upper right of
the screen.
During the movie shooting, you can
press the <p> button to focus
again.
To stop shooting the movie, press the
<I> button again.
Movie microphone
143
k Shooting Movies
During movie shooting, you can lock the exposure (AE lock) by pressing
the <A> button (p.115). After applying AE lock during movie shooting,
you can cancel it by pressing the <S> button.
If you set the power switch to <J> and turn the <5> dial, you can set
the exposure compensation.
The ISO speed will be set automatically within ISO 100-12800. If the
[Highest ISO speed] is set to [H1], [H2] or [H3] in [8C.Fn I -3: Set ISO
speed range] (p.208), the ISO speed will be set automatically within the
expanded range up to the upper limit. However, setting the [Lowest ISO
speed] to [L] will not expand the ISO speed range to the lower limit. Also,
even if the ISO speed range is set to a narrower range than the default,
the narrower range will not take effect.
Pressing the shutter button halfway displays the ISO speed, shutter
speed, and aperture at the screen bottom. This is the exposure setting
for taking a still photo (p.148). The exposure setting for movie shooting is
not displayed. Note that the exposure setting for movie shooting may
differ from that for still shooting.
Manual Exposure Shooting
C
Y
P
O
When the shooting mode is <a>, you can manually set the ISO speed,
shutter speed, and aperture for movie shooting.
1
Set the shooting mode to <a>.
Press the <W> button and turn
the <6/5> dial to select <a>.
the ISO speed.
2 SetPress
the <Z> button and look at
the screen while turning the <6/
5> dial to set the ISO speed.
For details on the ISO speed, see
page 146.
144
k Shooting Movies
the shutter speed and
3 Set
aperture.
Press the shutter button halfway and
check the exposure level indicator.
Turn the <6> dial to set the shutter
speed within 1/30 (1/60) sec. to
1/4000 sec.
If you set the power switch to <J>
and turn the <5> dial, you can set
the aperture.
and shoot the movie.
4 Focus
The procedure is the same as steps 2
C
Y
P
O
and 3 for “Autoexposure Shooting”
(p.143).
With manual exposure shooting, AE lock and exposure compensation
cannot be set.
Changing the aperture during movie shooting is not recommended since
variations in the exposure, due to the drive of the lens aperture, will be
recorded.
If <Q> is set and the ISO speed or aperture changes during movie
shooting, the white balance may also change.
If you shoot a movie under fluorescent lighting, the movie image might
flicker.
The shutter speed’s lower limit will change depending on the frame rate
(p.151).
When shooting a movie of a moving subject, a shutter speed of 1/30 sec.
to 1/125 sec. is recommended. The faster the shutter speed, the less
smooth the subject’s movement will look.
145
k Shooting Movies
About the ISO speed during manual exposure
The ISO speed can be set to [AUTO] (A) or within ISO 100-12800 in
1/3-stop increments.
If the ISO speed is set to [AUTO] (A), the ISO speed will be set
automatically within ISO 100-12800. (The [8C.Fn I -3: Set ISO
speed range] (p.208) setting will not take effect.) Movie shooting as
in aperture-priority AE mode (fixed aperture, standard exposure) is
then possible.
If [Highest ISO speed] is set to [H1] (ISO 25600), [H2] (ISO 51200),
or [H3] (ISO 102400) in [8C.Fn I -3: Set ISO speed range], the
ISO speed can be set manually within the expanded range up to the
upper limit. Also, if the ISO speed range has been set to a narrower
range than the default, you can set the ISO speed within the
narrower range.
Even if [Lowest ISO speed] has been set to [L] (ISO 50) in [8C.Fn
I -3: Set ISO speed range], [L] cannot be selected when you set the
ISO speed.
If [8C.Fn II -3: Highlight tone priority] (p.215) is set to [1: Enable],
the settable ISO speed range will start from ISO 200.
C
146
Y
P
O
k Shooting Movies
Notes for autoexposure and manual exposure shooting
The camera cannot autofocus continuously like a camcorder.
During movie shooting, do not point the lens toward the sun. The sun’s
heat can damage the camera’s internal components.
Even if the [5 Record func+media/folder sel.] menu option has been
set to [Rec. separately] or [Rec. to multiple] (p.57), a movie cannot be
recorded simultaneously to both the CF card <f> and SD card <g>. If
[Rec. separately] or [Rec. to multiple] has been set, the movie will be
recorded to the card which has been set for [Playback].
Cautions for movie shooting are on pages 153 and 154.
If necessary, also read the Live View shooting cautions on pages
139 and 140.
Movies cannot be encrypted with Original Data Security Kit OSK-E3.
Y
P
O
A single movie file will be recorded for each movie shot.
During movie shooting, the top, bottom, left, and right parts of the screen
will have a semi-transparent mask. The movie will be recorded in the
area surrounded by the mask. The semi-transparent mask size will
change depending on the [Movie rec. size] setting (p.151).
The sound is recorded in monaural by the camera’s built-in microphone
(p.143).
Stereo sound recording is possible by connecting an external microphone
equipped with a stereo mini plug (3.5mm dia.) to the camera’s external
microphone IN terminal (p.19). Do not connect the camera’s external
microphone IN terminal to anything other than an external microphone.
The sound recording level will be adjusted automatically.
If you playback the movie with “Shooting information display” (p.156), the
shooting mode, shutter speed, and aperture will not be displayed. The
image information (Exif) will record the settings used at the start of the
movie.
With a fully-charged Battery Pack LP-E4, the total movie recording time
will be as follows: At 23°C/73°F: Approx. 2 hr. 40 min., At 0°C/32°F:
Approx. 2 hr. 20 min.
With ZoomBrowser EX/ImageBrowser (provided software), you can
extract a still photo from the movie. The still photo quality will be as
follows: Approx. 2.07 megapixels at [1920x1080], approx. 920,000 pixels
at [1280x720], and approx. 310,000 pixels at [640x480].
C
147
k Shooting Movies
B About the Information Display
Each time you press the <B> button, the information display will
change.
Movie shooting remaining time/Elapsed time
Still photo image size
White balance
Recording movie
Picture Style
AF point
(d)
Auto Lighting
Optimizer
• : Standard
• : Low
• : Strong
• : Disable
Movie-recording size
AE lock
Frame rate
Shutter speed
Aperture
Drive mode
C
Exposure level
Y
P
O
F: Movie
display
Battery check
Highlight tone priority
ISO speed
Shots remaining
AF mode
•d : Live mode
•c : Face detection Live
mode
•f: Quick mode
If there is no card in the camera, the movie shooting remaining time will
be displayed in red.
When movie shooting starts, the movie shooting remaining time will
change to the elapsed time.
148
k Shooting Movies
Taking Still Photos During Movie Shooting
You can take a still photo at anytime by
pressing the shutter button completely,
even during movie shooting.
The still photo will record the entire screen including the semitransparent mask.
The still photo will be taken at the exposure setting displayed when
you press the shutter button halfway. If a still photo is shot during
movie shooting in manual exposure mode, the still photo will be
taken with the exposure setting set for the movie.
The still photo will be taken at the image size, JPEG compression
rate, and Picture Style that have been set.
If you take a still photo during movie shooting, the movie will have a
still moment lasting approx. 1 sec. The still photo will be recorded to
the card, and the movie shooting will resume automatically when the
Live View image is displayed.
The movie and still photo will be recorded to the card as separate
files. If you use continuous shooting, the captured still photos will be
recorded to the card.
If [Record func.] (p.57) is set to [Standard] or [Auto switch media],
the movies and still photos will be recorded to the same card. If
[Rec. separately] or [Rec. to multiple] is set, the movies will be
recorded to the card set for [Playback]. And the still photos will be
recorded at the image size set for the respective card.
C
Y
P
O
Any external Speedlite used will not fire.
AEB cannot be used.
Continuous still photo shooting is possible during movie shooting, but the
captured images will not be displayed during the continuous shooting.
Depending on the still photo’s image size, number of shots during
continuous shooting, card performance, etc., the movie shooting might
stop automatically.
149
k Shooting Movies
For continuous shooting of still photos during movie shooting, using a
high-speed CF card compatible with UDMA transfers is recommended.
Setting a smaller image size for still photos and shooting fewer
continuous still photos are also recommended.
If the drive mode has been set to <k> or <l> and you start shooting
a movie, the drive mode will automatically change to <u> (single
shooting).
Shooting Function Settings
As with normal shooting through the viewfinder, during movie shooting,
you can still use the camera buttons to change function settings and
execute playback.
Y
P
O
Pressing the <W>, <o>,
<O> or <A> button will display the
respective setting screen on the LCD
monitor. To change the setting, turn the
<6> or <5> dial.
C
When you press the <B> button, turn the <6> dial to set the
card to be used to record and turn the <5> dial to set the image
size or white balance while looking at the rear LCD panel.
The metering mode will be fixed to center-weighted average
metering for movie shooting. If the AF mode is set to [u (Face
detection) Live mode], the exposure control will be evaluative
metering linked to the detected face.
Even if the AF mode has been set to [Quick mode], it will switch to
[Live mode] during movie shooting.
150
3 Menu Function Settings
During movie shooting, you can still set the menu options. Movie
shooting functions are listed below.
Under the [6] tab with the [Live View/
Movie func. set.] screen, you can set
the following functions.
AF mode (p.131-137)
You can select [Live mode], [u Live mode], or [Quick mode].
Note that the camera cannot focus a moving subject
continuously.
Grid display
With [Grid 1l] or [Grid 2m], you can display grid lines. You can
check the camera tilt before shooting.
Y
P
O
Movie-recording size
You can select the movie’s image size [****x****] and frame rate [9]
(frames recorded per second). 9 (frame rate) displayed on the
[Movie rec. size] screen switches automatically depending on the
[6 Video system] setting.
C
• Image size
[1920x1080] : Full HD (Full High-Definition) recording quality.
[1280x720] : HD (High-Definition) recording quality.
[640x480]
: Standard recording quality. The screen format
will be 4:3.
• Frame rate (fps: frames per second)
[6] [8] : For areas where the TV format is NTSC (North
America, Japan, Korea, Mexico, etc.).
[5] [7] : For areas where the TV format is PAL (Europe,
Russia, China, Australia, etc.).
[4]
: Mainly for motion pictures.
* The actual frame rate (fps) will be: 6: 29.97, 5: 25.00, 4: 23.976,
8: 59.94, 7: 50.00
151
3 Menu Function Settings
Total Movie Recording Time and File Size Per Minute (Approx.)
Movie-recording
Size
Total Recording Time
File Size
4GB Card
16GB Card
1920x1080
65 4
12 min.
49 min.
330 MB/min.
1280x720
87
12 min.
49 min.
330 MB/min.
640x480
87
24 min.
1 hr. 39 min.
165 MB/min.
After you start shooting a movie, the movie shooting will stop automatically if
the file size reaches 4 GB or if the movie time reaches 29 min. 59 sec. To start
movie shooting again, press the <I> button. (A new movie file starts being
recorded.)
Sound recording
When [On] is set, the built-in microphone will record sound in
monaural. Stereo sound recording is possible by connecting an
external microphone equipped with a stereo mini plug (3.5mm dia.)
to the camera’s external microphone IN terminal (p.19). When an
external microphone is connected, the sound recording will
automatically come through the external microphone. If [Off] is set,
sound will not be recorded.
C
Y
P
O
Metering timer
You can change how long the exposure setting is displayed (AE lock
time).
If you select [1 Custom WB regist.], [2 Dust Delete Data], [7 Save/
load settings on media], [7 Regist/apply basic settings], [7 Sensor
cleaning], [7 Clear all camera settings], or [7 Firmware Ver.], the
movie shooting will stop.
152
Movie Shooting Cautions
Recording and Image Quality
If the attached lens has an Image Stabilizer, the Image Stabilizer will
operate at all times even if you do not press the shutter button halfway.
The Image Stabilizer may cause the total movie shooting time or the
number of possible shots to decrease. If you use a tripod or if the Image
Stabilizer is not necessary, you should set the IS switch to <2>.
The camera’s built-in microphone will also pick up camera operation
noise. If you use a commercially-available external microphone, you can
prevent (or reduce) these noises from being recorded.
To autofocus again during movie shooting, press the <p> button.
(AF will not work by pressing the shutter button halfway.) However,
autofocusing during movie shooting is not recommended since it can
momentarily throw the focus way off or change the exposure.
If the card’s remaining capacity is not enough for movie shooting, the
movie shooting remaining time (p.148) will be displayed in red.
If you use a card having a slow writing speed, a five-level
indicator might appear on the right of the screen during movie
shooting. It indicates how much data has not yet been written
to the card (remaining capacity of the internal buffer memory).
The slower the card, the faster the indicator will climb upward.
If the indicator becomes full, movie shooting will stop
automatically.
Indicator
If the card has a fast writing speed, the indicator will either not
appear or the level (if displayed) will hardly go upward. First,
shoot a few test movies to see if the card can write fast enough.
During movie shooting, certain Custom Function settings will be disabled
(p.205-207).
C
Y
P
O
153
Movie Shooting Cautions
Camera’s internal temperature increase and image degradation
When you shoot movies at high ISO speeds, noise (horizontal banding,
dots of light, etc.) or irregular colors may appear.
If you continue to shoot movies for a prolonged period, the camera’s
internal temperature will increase. This can degrade the image quality.
While not shooting, turn off the power.
If you shoot under direct sunlight or high-temperature conditions, the
<E> icon (high internal temperature warning) may appear on the
screen. If you keep shooting a movie with the warning icon displayed, the
image quality might degrade. You should turn off the power and allow the
camera to rest for a while.
If the <E> icon is displayed and you keep shooting movies until the
camera’s internal temperature increases further, the movie shooting will
stop automatically. Movie shooting will be disabled until the camera’s
internal temperature decreases.
Y
P
O
Playback and TV connection
If the brightness changes greatly during movie shooting, that part might
look momentarily still when you playback the movie.
If the camera is connected to a TV set with an HDMI cable (p.171),
pressing the <B> button during movie shooting will not display the
INFO screen.
If you connect the camera to a TV set (p.170-171) and shoot a movie,
the TV will not output any sound during the shooting. However, the
sound will be properly recorded.
C
154
Image Playback
Y
P
O
This chapter explains how to playback and erase
photos and movies, how to view them on a TV screen,
and other playback-related functions.
C
About images taken with another camera:
The camera might not be able to properly display images captured
with a different camera or edited with a computer or whose file name
or file format was changed.
155
x Image Playback
Single Image Display
1
Playback the image.
Press the <x> button.
X The last captured image or last image
viewed will appear.
the image.
2 Select
To playback images starting with the last
image, turn the <5> dial counterclockwise.
To playback images starting with the first
captured image, turn the dial clockwise.
Each time you press the <B>
button, the display format will change.
C
Single image display
Histogram display
Y
P
O
Single image display + Image size
Shooting information display
the image playback.
3 ExitPress
the <x> button to exit the
image playback and return the
camera to shooting ready.
156
x Image Playback
B Shooting Information Display
FE Microadjustment
Exposure compensation amount
Protect
Voice memo
Folder number - File number
Flash exposure compensation amount
Card
Aperture
Histogram
(Brightness/RGB)
Shutter speed/
Recording time
AF
Microadjustment
Metering mode
Shooting mode/
Movie/Still photo
during movie shooting
Color temperature
when <P> is set
ISO speed
Image size/
Movie-recording format
Movie-recording size
Frame rate
Playback number/
Total images
recorded
Highlight tone priority
File size
C
Y
P
O
White balance
White balance
correction
Shooting date and time
AE Microadjustment
Picture Style/Settings
Color space
Image verification data appended
Encryption
* When you shoot in RAW+JPEG image size, the JPEG image file size will be
displayed.
* For movie files, the movie icon <k>, recording format <D>, recording size
<A/B/C>, and frame rate <8/7/6/5/4> will be displayed. The
shooting mode, shutter speed, and aperture will not be displayed.
* For still photos taken during movie shooting display, < > will be displayed.
About the Highlight Alert
When the [4 Highlight alert] menu option is set to [Enable],
overexposed highlight areas will blink. To obtain more image detail in
the overexposed areas, set the exposure compensation to a
negative amount and shoot again.
157
x Image Playback
About the AF Point Display
When the [4 AF point disp.] menu option is set to [Enable], the AF
point which achieved focus will be displayed in red. If automatic AF
point selection was used, multiple AF points might be displayed in red.
About the Histogram
The brightness histogram display shows the exposure level
distribution and overall brightness. The RGB histogram display is for
checking the color saturation and gradation. The display can be
switched with the [4 Histogram] menu option.
[Brightness] Display
Sample Histograms
This histogram is a graph showing the distribution of
the image’s brightness level. The horizontal axis
indicates the brightness level (darker on the left and
Dark image
brighter on the right), while the vertical axis indicates
how many pixels exist for each brightness level. The
more pixels there are toward the left, the darker the
image. And the more pixels there are toward the right,
Normal brightness
the brighter the image. If there are too many pixels on
the left, the shadow detail will be lost. And if there are
too many pixels on the right, the highlight detail will
Bright image
be lost. The gradation in-between will be reproduced.
By checking the image and its brightness histogram,
you can see the exposure level inclination and the overall gradation.
C
Y
P
O
[RGB] Display
This histogram is a graph showing the distribution of each primary color’s
brightness level in the image (RGB or red, green, and blue). The horizontal
axis indicates the color’s brightness level (darker on the left and brighter
on the right), while the vertical axis indicates how many pixels exist for
each color brightness level. The more pixels there are toward the left, the
darker and less prominent the color. And the more pixels there are toward
the right, the brighter and denser the color. If there are too many pixels on
the left, the respective color information will be lacking. And if there are too
many pixels on the right, the color will be too saturated with no detail. By
checking the image’s RGB histogram, you can see the color’s saturation
and gradation condition and white balance inclination.
158
x Searching for Images Quickly
y Display Multiple Images on One Screen (Index display)
Search for images quickly with the index display showing four or nine
images on one screen.
1
Î
Turn on the index display.
During image playback, press the
<y> button.
X The 4-image index display will
appear. The currently-selected image
will be highlighted in a blue frame.
Press the <y> button again to switch
to the 9-image index display.
Pressing the <u> button will toggle
the display from 9 images, 4 images,
and one image displayed.
C
Y
P
O
Î
the image.
2 Select
Turn the <5> dial to move the blue
frame to select the image.
Press <0> and the selected image
will be displayed as a single image.
159
x Searching for Images Quickly
I Jump through Images (Jump display)
With the single image display, you can turn the <6> dial to jump
through the images.
1
Select the jump method.
With the [4 Image jump w/6]
menu option, select the desired jump
method from [1 image/10 images/
100 images/Date/Folder/Movies/
Stills], then press <0>.
Y
P
O
by jumping.
2 Browse
Press the <x> button to playback
C
Jump method
Image location
the image.
Turn the <6> dial.
X The jump display will proceed
according to the selected jump
method.
X On the bottom right, the jump method
and current image location are
indicated.
To search images according to the shooting date, select [Date]. Turn the
<6> dial to display the shooting date.
To search images according to folder, select [Folder].
If the card has both [Movies] and [Stills], select either one to display
only movies or stills.
160
u/y Magnified View
You can magnify the image by 1.5x to 10x on the LCD monitor.
1
Magnified area position
Magnify the image.
During image playback, press the
<u> button.
X The image will be magnified.
If you hold down the <u> button, the
image will continue to be magnified until
it reaches the maximum magnification.
To reduce the magnification, press
the <y> button. If you hold down the
button, the magnification will continue
to reduce to the single image display.
around the image.
2 Scroll
Use <9> to scroll around the
C
Y
P
O
magnified image.
To exit the magnified display, press the <x>
button and the single image display will return.
Magnified View’s Starting Position
Normally, the magnified view starts at the image center. When the [4
Enlarge display] menu option is set to [Enlarge from selected AF
point], the magnified view starts at the selected AF point. This is
convenient for quickly checking the focus.
While in the magnified view, you can keep the same magnified area and
magnification when you turn the <5> dial to view another image.
In the case of images shot with automatic AF point selection or with
manual focus <g>, the magnification will start at the image center.
Magnified view is not possible during the image review immediately after
the image is taken.
With [Enlarge from selected AF point]
• The starting magnification varies depending on the image size that was set.
• If C.Fn III -8-1/2/3 is set, the focusing point area will be expanded and the
magnified view starts from the AF point that actually achieved focus. Therefore,
the view may not be magnified from the manually-selected AF point.
A movie cannot be magnified.
161
b Rotating the Image
You can rotate the displayed image to the desired orientation.
1
Select [Rotate].
Under the [3] tab, select [Rotate],
then press <0>.
the image.
2 Select
Turn the <5> dial to select the
image to be rotated.
You can also select an image on the
index display.
Y
P
O
the image.
3 Rotate
Each time you press <0>, the
C
image will rotate clockwise as follows:
90° → 270° → 0°
To rotate another image, repeat steps
2 and 3.
To exit and return to the menu, press
the <M> button.
If you have set [5 Auto rotate] to [OnzD] (p.182) before taking
vertical shots, you need not rotate the image as described above.
If the rotated image is not displayed in the rotated orientation during
image playback, set the [5 Auto rotate] menu option to [OnzD].
A movie cannot be rotated.
162
k Enjoying Movies
Basically, there are the following three ways to playback the movies you
shot.
Playback on a TV set
(p.170, 171)
Use the provided stereo AV cable or
HDMI Cable HTC-100 (sold separately)
to connect the camera to a TV set. You
can then playback the captured movies
and photos on the TV.
If you have a High-Definition TV set and
connect your camera to it with an HDMI
cable, you can watch Full HD (Full HighDefinition 1920x1080) and HD (HighDefinition 1280x720) movies with higher
image quality.
Y
P
O
Movies on a card can be played only by devices compatible with MOV
files.
Since hard disk recorders do not have an HDMI IN terminal, the camera
cannot be connected with an HDMI cable.
Even if the camera is connected to a hard disk recorder with a USB
cable, movies and photos cannot be played nor saved.
C
Playback on the Camera’s LCD Monitor
(p.165-169)
You can playback movies on the
camera’s LCD monitor and even edit out
the first and last scenes. You can also
playback the photos and movies
recorded in the card as an automatic
slide show.
A movie edited with a personal computer cannot be rewritten to the card and
played back with the camera.
163
k Enjoying Movies
Playback and Editing with a Personal Computer
(See the PDF file instruction manual for ZoomBrowser EX/ImageBrowser)
The movie files recorded in the card can
be transferred to a personal computer
and played or edited with ZoomBrowser
EX/ImageBrowser (provided software).
You can also extract a single frame from
a movie and save it as a still photo.
To have the movie playback smoothly on a personal computer, the
personal computer must be a high-performance model. Regarding the
hardware requirements for ZoomBrowser EX/ImageBrowser, see the
PDF file instruction manual.
If you want to use commercially-available software to playback or edit the
movies, be sure it is compatible with MOV files. For details on
commercially-available software, inquire the software maker.
C
164
Y
P
O
k Playing Movies
1
Playback the image.
Press the <x> button to playback
images.
a movie.
2 Select
Turn the <5> dial to select an image.
With the single-image display, the
<1s> icon displayed on the
upper left indicates that it is a movie.
During the index display, the perforation
on the left edge of the image indicates that
it is a movie. Movies cannot be played
on the index display, so press <0> to
switch to the single-image display.
Y
P
O
the single-image display,
3 On
press <0>.
C
X The movie playback panel will appear
on the bottom.
the movie.
4 Playback
Turn the <5> dial to select [7]
(play), then press <0>.
X The movie will start playing.
You can pause the movie playback by
pressing <0>.
During movie playback, you can
adjust the sound volume by turning
the <6> dial.
For more details on the playback
procedure, see the next page.
Speaker
165
k Playing Movies
Function
Exit
Playback Description
Returns to the single-image display.
7 Play
Pressing <0> toggles between play and stop.
8 Slow motion
Adjust the slow motion speed by turning the <5> dial. The
slow-motion speed is indicated on the upper right.
5 First frame
Displays the movie’s first frame.
Each time you press <0>, a single previous frame is
3 Previous frame displayed. When you hold down <0>, it will rewind the
movie.
6 Next frame
Each time you press <0>, the movie will play frame-byframe. When you hold down <0>, it will fast forward the
movie.
4 Last frame
Displays the movie’s last frame.
X Edit
Displays the editing screen (p.167).
Y
P
O
Playback position
mm’ SS”
Volume
Playback time
C
You can adjust the built-in speaker’s sound volume by
turning the <6> dial.
With a fully-charged Battery Pack LP-E4, the continuous playback time
at 23°C/73°F will be as follows: Approx. 9 hr. 20 min.
During the single-image display, press the <B> button to switch the
display format (p.156).
If you took a still photo while you shot the movie, the still photo will be
displayed for approx. 1 sec. during the movie playback.
If you connect the camera to a TV set (p.170, 171) and playback a
movie, adjust the sound volume with the TV set. Turning the <6> dial
will not change the sound volume.
166
X Editing the Movie’s First and Last Scenes
You can edit out the first and last scenes of a movie in 1-sec. increments.
1
On the movie playback screen,
select [X].
X The editing screen will be displayed.
the parts to be edited out.
2 Specify
Select either [ ] (Cut beginning) or
[ ] (Cut end), then press <0>.
Tilt <9> to the left or right to see the
previous or next frames. Holding it down
will fast forward the frames. Turn the
<5> dial to browse frame-by-frame.
After deciding which part to edit out, press
<0>. The portion highlighted in blue on
the top of the screen is what will remain.
Y
P
O
the editing.
3 Check
Select [7] and press <0> to playback
C
the portion highlighted in blue.
To change the editing, go back to step 2.
To cancel the editing, select [ ] and
press <0>.
the movie.
4 Save
Select [ ], then press <0>.
X The save screen will appear.
To save it as a new movie, select
[New file]. Or to save it and overwrite
the original movie file, select
[Overwrite]. Then press <0>.
Since the editing is done in 1-sec. increments (position indicated by [X]), the exact
position where the movie is edited may differ slightly from the position you specified.
If the card does not have enough room, [New file] will not be selectable.
More movie editing functions are available with ZoomBrowser EX/
ImageBrowser (provided software).
167
3 Slide Show (Auto Playback)
You can playback the images in the card as an automatic slide show.
1
Number of images to be played
Select [Slide show].
Under the [4] tab, select [Slide
show], then press <0>.
the images to be played
2 Select
back.
Turn the <5> dial to select the item
shown on the left, then press <0>.
[All images/Movies/Stills]
Y
P
O
Turn the <5> dial to select one of
the following: [jAll images/
kMovies/zStills]. Then press
<0>.
C
[Folder/Date]
Turn the <5> dial to select either
[nFolder] or [iDate].
When <z > is highlighted,
press the <B> button.
Turn the <5> dial to select the folder
or date, then press <0>.
Item
Playback Description
jAll images
All the still photos and movies in the card will be played back.
nFolder
Still photos and movies in the selected folder will be played
back.
iDate
Still photos and movies taken on the selected shooting date will
be played back.
kMovies
Only the movies in the card will be played back.
zStills
Only the still photos in the card will be played back.
168
3 Slide Show (Auto Playback)
the play time and repeat option.
3 SetTurn
the <5> dial to select [Set up],
then press <0>.
For still photos, set the [Play time]
and [Repeat] options, then press the
<M> button.
[Play time]
[Repeat]
Y
P
O
show.
4 StartTurnthetheslide
<5> dial to select [Start],
then press <0>.
X After [Loading image...] is displayed
for a few seconds, the slide show will
start.
C
slide show.
5 QuitTo the
quit the slide show and return to
the setting screen, press the
<M> button.
To pause the slide show, press <0>. During pause, [G] will be displayed
on the upper left of the image. Press <0> again to resume the slide show.
During auto playback, you can press the <B> button to change the
still photo display format.
During movie playback, you can adjust the sound volume by turning the
<6>.
During pause, you can turn the <5> or <6> dial to view another image.
During the slide show, auto power off will not work.
The display time may vary depending on the image.
To view the slide show on a TV set, see pages 170-171.
169
Viewing the Images on TV
You can view the still photos and movies on a TV set. Before connecting
or disconnecting the cable between the camera and television, turn off
the camera and television.
* Adjust the movie’s sound volume with the TV set. To playback movies, see page 165.
* Depending on the TV set, part of the image displayed might be cut off.
Viewing on Non-HD (High-Definition) TV Sets
1
Connect the provided AV cable to
the camera.
Connect the stereo AV cable to the camera’s
<q/C> terminal.
With the plug’s <Canon> logo facing
the front of the camera, insert it into
the <q/C> terminal.
(Red)
(White)
(Yellow)
Y
P
O
the AV cable to the TV set.
2 Connect
Connect the stereo AV cable to the
TV’s video IN terminal and to the
audio IN terminal.
C
on the TV and switch the TV’s video
3 Turn
input to select the connected port.
the camera’s power switch to
4 Set
<1>.
the <x> button.
5 Press
X The image will appear on the TV
screen. (Nothing will be displayed on
the camera’s LCD monitor.)
If the video system format does not match the TV’s, the images will not
be displayed properly. Set the proper video system format with [6 Video
system].
Do not use any stereo AV cable other than the one provided. Images
might not be displayed if you use a different cable.
170
Viewing the Images on TV
Viewing on HD (High-Definition) TV Sets
The HDMI Cable HTC-100 (sold separately) is required.
1
Connect the HDMI cable to the
camera.
Connect the HDMI cable to the
camera’s <D> terminal.
With the plug’s <dHDMI MINI> logo
facing the back of the camera, insert
it into the <D> terminal.
the HDMI cable to the TV set.
2 Connect
Connect the HDMI cable to the TV’s
HDMI IN port.
Y
P
O
Turn on the TV and switch the TV’s
video input to select the connected port.
3
the camera’s power switch to
4 Set
<1>.
the <x> button.
5 Press
X The image will appear on the TV
C
screen. (Nothing will be displayed on
the camera’s LCD monitor.)
The images will be displayed at the
TV’s optimum resolution automatically.
By pressing the <B> button, you
can change the display format.
Do not connect any other device’s output to the camera’s <D>
terminal. Doing so may cause a malfunction.
Some TVs might not be able to display the captured images. In such a
case, use the stereo AV cable provided.
The camera’s <q/C> terminal and <D>
terminal cannot be used at the same time.
171
J Protecting Images
Protecting the image prevents it from being erased accidentally.
Protecting a Single Image
1
Select the image to be protected.
Press the <x> button to playback
images, then turn the <5> dial to
select an image.
the image.
2 Protect
During image playback, press the
<H> button.
X When an image is protected, the
<K> icon will appear on the top of
the screen.
To cancel the image protection, press
the <H> button again. The <K>
icon will disappear.
To protect another image, repeat
steps 1 and 2.
C
Y
P
O
3 Protecting All Images in a Folder or Card
You can protect all the images in a folder or card at one time.
When the [3 Protect images] menu
option is set to [All images in folder] or
[All images on card], all the images in
the folder or card will be protected.
To cancel the image protection, select
[Clear all images in folder] or [Clear all
images on card].
172
J Protecting Images
If you format the card (p.50), the protected images will also be erased.
To protect an image, press and quickly let go of the <H> button. If you
hold down the button for approx. 2 sec., a voice memo will be recorded.
Images can also be protected individually when the [3 Protect images]
menu option is set to [Select images]. Press <0> to protect or
unprotect the image.
Once an image is protected, it cannot be erased by the camera’s erase
function. To erase a protected image, you must first cancel the protection.
If you erase all the images (p.179), only the protected images will
remain. This is convenient when you want to erase unnecessary images
all at once.
If [8C.Fn IV -9: H button function] is set to [1: Record memo
(Protect: Disabled)] or [2: Play memo (hold: Record memo)], images
cannot be protected with the <H> button. Use the [3 Protect
images] menu option’s [Select images] to protect images.
C
Y
P
O
173
K Recording and Playing Voice Memos
You can append a voice memo to a captured image. The voice memo will
be saved as a WAV sound file having the same file number as the image.
The sound can be played back with the camera or provided software.
Recording a Voice Memo
1
Select the image to which you
want to append a voice memo.
Press the <x> button to playback images,
then turn the <5> dial to select the image.
a voice memo.
2 Record
While the image is displayed, press
Voice memo microphone
the <H> button for approx. 2 sec.
When [Recording memo...] appears,
keep pressing the button and speak
into the microphone. The maximum
recording time for a voice memo is 30
sec.
To end the voice memo, let go of the
button.
X The < > icon will be displayed on
the top of the screen.
C
Y
P
O
You cannot append a voice memo to a protected image.
You cannot append a voice memo to a movie.
To record a voice memo longer than 30 sec., repeat step 2.
You can also record a voice memo once, right after image capture during
the image review by following step 2.
A voice memo cannot be recorded with an external microphone.
174
K Recording and Playing Voice Memos
Playing a Voice Memo
When [8C.Fn IV -9: H button function] is set to [2: Play memo (hold: Record
memo)] (p.231), the voice memo appended to the image can be played back.
1
Set [8C.Fn IV -9: H button
function] to [2: Play memo (hold:
Record memo)].
Set this function while referring to
page 231.
For details on setting a Custom
Function, see page 204.
the image whose voice
2 Select
memo you want to playback.
Y
P
C3 O
Press the <x> button to playback images,
then turn the <5> dial to select an image
which has the < > icon displayed on the top.
Playback a voice memo.
Speaker
While the image is displayed, press
the <H> button.
X The voice memo will be played.
Turn the <6> dial to adjust the
sound volume.
To stop playback, press the <H>
button.
If the image has been appended with multiple voice memos, they will be
played consecutively.
Erasing only the voice memo appended to an image is not possible with the camera.
If the image is erased (p.179), any appended voice memo will also be erased.
175
a Copying Images
The images recorded in a card can be copied to the other card.
3 Copying Individual Images
1
Select [Image copy].
Under the [3] tab, select [Image
copy], then press <0>.
[Sel.Image].
2 Select
Check the copy source and target
card’s capacity.
Turn the <5> dial to select
[Sel.Image], then press <0>.
Lowest file number
Number of images in folder
C
Y
P
O
the folder.
3 Select
Turn the <5> dial to select the folder
containing the image to be copied,
then press <0>.
Refer to the images displayed on the
right to help you select the desired
folder.
X The images in the selected folder will
be displayed.
Folder name
Highest file number
The copy source is the card selected by the [5 Record func+media/folder
sel.] menu option’s [Record/play] ([Playback]) setting.
176
a Copying Images
Total images selected
the image.
4 Select
Turn the <5> dial to select the
image to be copied, then press <0>.
X The <X> icon will appear on the
upper left of the screen.
Press the <y> button to display the
three-image view. To return to the singleimage display, press the <u> button.
To select another image to be copied,
repeat step 4.
the <H> button.
5 Press
After selecting all the images to be
copied, press the <H> button.
Y
P
O
[OK].
6 Select
Check the target card and press
C
<0>.
the target folder.
7 Select
Turn the <5> dial to select the target
folder where the images are to be
copied to, then press <0>.
To create a new folder, select [Create
folder].
[OK].
8 Select
Check the copy source and target
card’s information.
Turn the <5> dial to select [OK],
then press <0>.
177
a Copying Images
X The copying will start and the
progress will be displayed.
When the copying is completed, the
result will be displayed. Select [OK] to
return to the screen in step 2.
3 Copying All Images in a Folder
In step 2, select [Sel.n]. Select the source folder to be copied, then
the target folder.
3 Copying All Images in a Card
Y
P
O
In step 2, select [All image]. All the folders and images in the source
card will be copied to the target card. (The folder numbers and file
names will remain the same in the target folder.)
C
The file name of the copied image will be the same as the source
image’s file name.
If [Sel.Image] has been set, you cannot copy images in multiple folders
at one time. Select images in each folder to copy them folder by folder.
If an image is being copied to a target folder having the same folder number as
the source folder and the target folder already has an image with the same file
number, the following will be displayed: [Skip image and continue] [Replace
existing image] [Cancel copy]. Select the copying method, then press <0>.
• [Skip image and continue]:
Any images in the source folder having the same file number as
images in the target folder will be skipped and not copied.
• [Replace existing image]:
Any images in the target folder having the same file number as the
source images (including protected images) will be overwritten.
If an image with a print order (p.201) is overwritten, you will have to set
the print order again.
The image’s print order information will not be retained when the image is copied.
Shooting is not possible during the copying operation. Select [Cancel]
before trying to shoot.
178
L Erasing Images
You can either select and erase images one by one or erase them in
one batch. Protected images (p.172) will not be erased.
Once an image is erased, it cannot be recovered. Make sure you
no longer need the image before erasing it. To prevent important
images from being erased accidentally, protect them. Erasing a
RAW+JPEG image will erase both the RAW and JPEG images.
Erasing a Single Image
1 Playback the image to be erased.
the <L> button.
2 Press
X The erase menu will appear at the
bottom of the screen.
Y
P
O
the image.
3 Erase
X Turn the <5> dial to select [Erase],
C
then press <0>. The image
displayed will be erased.
3 Checkmarking <X> Images to be Erased in a Batch
By checkmarking the images to be erased, you can erase multiple
images at one time. With the [3 Erase images] menu option, select
[Select and erase images]. With <0>, checkmark <X> the images to
be erased. Then press the <L> button.
3 Erasing All Images in a Folder or Card
You can erase all the images in a folder or card at one time. When the
[3 Erase images] menu option is set to [All images in folder] or [All
images on card], all the images in the folder or card will be erased.
To also erase protected images, format the card (p.50).
179
Changing Image Playback Settings
3 Adjusting the LCD Monitor Brightness
You can adjust the brightness of the LCD monitor to make it easier to
read.
1
Select [LCD brightness].
Under the [6] tab, select [LCD
brightness], then press <0>.
the brightness.
2 Adjust
While referring to the gray chart, turn
Y
P
O
the <5> dial, then press <0>.
C
To check the image’s exposure, looking at the histogram is
recommended (p.158).
During image playback, you can press the <U> button to display the
screen in step 2 and adjust the brightness.
180
Changing Image Playback Settings
3 Setting the Image Review Time
You can set how long the image is displayed on the LCD monitor
immediately after capture. To keep the image displayed, set [Hold]. To
not have the image displayed, set [Off].
1
Select [Review time].
Under the [2] tab, select [Review
time], then press <0>.
the desired time.
2 SetTurn
the <5> dial to select the
option, then press <0>.
C
Y
P
O
If [Hold] is set, the image will be displayed until the auto power off time
elapses.
181
Changing Image Playback Settings
3 Auto Rotation of Vertical Images
Vertical images are rotated automatically so they
are displayed vertically on the camera’s LCD
monitor and computer instead of horizontally. The
setting of this feature can be changed.
1
Select [Auto rotate].
Under the [5] tab, select [Auto
rotate], then press <0>.
the auto rotation.
2 SetTurn
the <5> dial to select the
option, then press <0>.
Y
P
O
OnzD
The vertical image is automatically rotated on both the camera’s
LCD monitor and on the personal computer.
OnD
The vertical image is automatically rotated only on the personal computer.
Off
The vertical image is not rotated.
C
Auto rotation will not work with vertical images captured while Auto rotate was set
to [Off]. They will not be rotated even if you later switch it to [On] for playback.
Immediately after image capture, the vertical image will not be
automatically rotated for the image review.
Movies cannot be rotated.
If the vertical image is taken while the camera is pointed up or down, the
image might not be rotated automatically for playback.
If the vertical image is not automatically rotated on the personal
computer screen, it means the software you are using is unable to rotate
the image. Using the provided software is recommended.
182
Sensor Cleaning
Y
P
O
The camera has a Self Cleaning Sensor Unit attached
to the image sensor’s front layer (low-pass filter) to
shake off dust automatically.
The Dust Delete Data can also be appended to the
image so that the dust spots remaining can be erased
automatically by Digital Photo Professional (provided
software).
C
About smear adhering to the front of the sensor
Besides dust entering the camera from outside, in rare cases lubricant
from the camera’s internal parts may adhere to the front of the sensor.
In case visible spots still remain after the automatic sensor cleaning,
having the sensor cleaned by a Canon Service Center is recommended.
Even while the Self Cleaning Sensor Unit is operating, you can
press the shutter button halfway to interrupt the cleaning and start
shooting immediately.
183
f Automatic Sensor Cleaning
Whenever you set the power switch to <1/J> or <2>, the Self Cleaning
Sensor Unit operates to automatically shake off any dust on the front of the
sensor. Normally, you need not pay attention to this operation. However, you
can execute the sensor cleaning at anytime as well as disable it.
Cleaning the Sensor Now
1
Select [Sensor cleaning].
Under the [7] tab, select [Sensor
cleaning], then press <0>.
[Clean nowf].
2 Select
Turn the <5> dial to select [Clean
Y
P
O
nowf], then press <0>.
[OK].
3 Select
Turn the <5> dial to select [OK],
C
then press <0>.
X During the sensor cleaning, the
<f> icon will be displayed on the
LCD monitor. When the cleaning
ends, the screen will return to step 2.
During the sensor cleaning, the shutter will make three shutter-release
sounds. The camera is not taking pictures.
For best results, do the sensor cleaning while the camera bottom is
placed on a table or other flat surface.
Even if you repeat the sensor cleaning, the result will not improve that
much. Right after the sensor cleaning is finished, the [Clean nowf]
option will remain disabled temporarily.
Disabling Automatic Sensor Cleaning
In step 2, select [Auto cleaningf] and set it to [Disable].
X The sensor cleaning will no longer be executed when you set the
power switch to <1/J> or <2>.
184
3 Appending Dust Delete Data
Normally, the Self Cleaning Sensor Unit will eliminate most of the dust
that might be visible on captured images. However, in case visible dust
still remains, you can append the Dust Delete Data to the image to later
erase the dust spots. The Dust Delete Data is used by Digital Photo
Professional (provided software) to erase the dust spots automatically.
Preparation
Get a solid-white object (paper, etc.).
Set the lens focal length to 50mm or longer.
Set the lens focus mode switch to <g> and set the focus to infinity
(∞). If the lens has no distance scale, look at the front of the lens and
turn the focusing ring clockwise all the way.
Obtain the Dust Delete Data
1
Y
P
O
Select [Dust Delete Data].
C
Under the [2] tab, select [Dust
Delete Data], then press <0>.
[OK].
2 Select
Turn the <5> dial to select [OK],
then press <0>. After the automatic
sensor cleaning ends, a message will
appear. Although there will be a
shutter sound, a picture is not taken.
185
3 Appending Dust Delete Data
a solid-white object.
3 Photograph
At a distance of 20 cm - 30 cm / 0.7 ft.
- 1.0 ft., fill the viewfinder with a
patternless, solid-white object and
take a picture.
X The picture will be taken in the aperturepriority AE mode with an aperture of f/22.
Since the image will not be saved, the
data can still be obtained even if there
is no card in the camera.
X When the picture is taken, the camera
will start obtaining the Dust Delete Data.
When the Dust Delete Data is obtained,
a message will appear.
Select [OK], and the menu will reappear.
Y
P
O
If the data was not obtained
successfully, a message to that effect
will appear. Follow the “Preparation”
procedure on the preceding page, then
select [OK]. Take the picture again.
C
About the Dust Delete Data
After the Dust Delete Data is obtained, it is appended to all the JPEG
and RAW images captured thereafter. Before an important shoot, you
should update the Dust Delete Data by obtaining it again.
To erase dust spots automatically with the provided software, see the
Software Instruction Manual in the CD-ROM.
The Dust Delete Data appended to the image is so small that it hardly
affects the image file size.
Be sure to use a solid-white object such as a new sheet of white paper. If the
paper has any pattern or design, it may be recognized as dust data and
affect the accuracy of the dust deletion with the software.
186
3 Manual Sensor Cleaning
Dust which could not be removed by the automatic sensor cleaning can
be removed manually with a blower, etc.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.
1
Select [Sensor cleaning].
Under the [7] tab, select [Sensor
cleaning], then press <0>.
[Clean manually].
2 Select
Turn the <5> dial to select [Clean
Y
P
3
CO
manually], then press <0>.
Select [OK].
Turn the <5> dial to select [OK],
then press <0>.
X In a moment, the reflex mirror will
lockup and the shutter will open.
“CLn” will blink on the top LCD panel.
cleaning.
4 EndAfterthecleaning
the sensor, set the
power switch to <2>.
Using the AC Adapter Kit ACK-E4 (sold separately) as power source is
recommended.
If you use the battery, make sure it is fully recharged.
187
3 Manual Sensor Cleaning
While cleaning the sensor, never do any of the following. If the
power is cut off, the shutter will close and the shutter curtains and
image sensor might get damaged.
• Setting the power switch to <2>.
• Removing or inserting the battery.
The surface of the image sensor is extremely delicate. Clean the sensor
with care.
Use a plain blower without any brush attached. A brush can scratch the
sensor.
Do not insert the blower tip inside the camera beyond the lens mount. If
the power is cut off, the shutter will close and the shutter curtains or
reflex mirror might get damaged.
Never use canned air or gas to clean the sensor. The blowing force can
damage the sensor or the spray gas can freeze on the sensor.
If smear that cannot be removed with a blower remains, having the
sensor cleaned by a Canon Service Center is recommended.
C
188
Y
P
O
Printing Images
Y
P
O
Printing (p.190)
You can connect the camera directly to a printer and print
out the images in the card. The camera is compatible with
“wPictBridge” which is the standard for direct printing.
C
Digital Print Order Format (DPOF) (p.199)
DPOF (Digital Print Order Format) enables you to print
images recorded in the card according to your printing
instructions such as the image selection, quantity to print,
etc. You can print multiple images in one batch or give the
print order to a photofinisher.
189
Preparing to Print
The direct printing procedure is done entirely with the camera
while you look at the LCD monitor.
Connecting the Camera to a Printer
1
Set the camera’s power switch to
<2>.
the printer.
2 SetForupdetails,
see the printer’s
instruction manual.
Y
P
O
the camera to a
3 Connecting
printer
Use the interface cable provided with
the camera.
When connecting the cable plug to
the <q/C> terminal,
the cable plug’s <D> icon must face
the back of the camera.
To connect to the printer, refer to the
printer’s instruction manual.
C
4 Turn on the printer.
the camera’s power switch to
5 Set
<1>.
X Some printers may make a beeping
sound.
190
Preparing to Print
wPictBridge
the image.
6 Playback
Press the <x> button.
X The image will appear, and the <w>
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
C
Y
P
O
Movies cannot be printed.
The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct.
Do not use any interface cable other than the one provided.
If there is a long beeping sound in step 5, it indicates a problem with the
printer. To find out what’s wrong, do the following:
1. Press the <x> button to playback the image.
2. Press <0>.
3. On the print setting screen, select [Print].
The error message will be displayed on the LCD monitor (p.198).
You can also print RAW images taken by this camera.
If you use the battery to power the camera, make sure it is fully charged.
With a fully-charged battery, printing up to approx. 6 hours is possible.
Before disconnecting the cable, turn off the camera and printer first. Hold
the plug (not the cord) to pull out the cable.
For direct printing, using AC Adapter Kit ACK-E4 (sold separately) to
power the camera is recommended.
191
wPrinting
The screen display and setting options will differ depending on the
printer. Some settings might not be available. For details, see the
printer’s instruction manual.
Printer-connected icon
1
Select the image to be printed.
Check that the <w> icon is
displayed on the upper left of the LCD
monitor.
Turn the <5> dial to select the
image to be printed.
<0>.
2 Press
X The print setting screen will appear.
Print setting screen
Y
P
O
Sets the printing effects (p.194).
Sets the date or file number imprinting to on
or off.
C
Sets the quantity to be printed.
Sets the trimming (cropping) (p.197).
Sets the paper size, type, and layout.
Returns to the screen in step 1.
Starts the printing.
The paper size, type, and layout you have set are displayed.
* Depending on the printer, certain settings such as the date and file
number imprinting and trimming might not be available.
[Paper settings].
3 Select
Turn the <5> dial to select [Paper
settings], then press <0>.
X The paper settings screen will
appear.
192
wPrinting
QSetting the Paper Size
Turn the <5> dial to select the size
of the paper loaded in the printer,
then press <0>.
X The paper type screen will appear.
YSetting the Paper Type
Turn the <5> dial to select the type
of the paper loaded in the printer,
then press <0>.
When using a Canon printer and Canon
paper, read the printer’s instruction manual
to check what paper types can be used.
X The page layout screen will appear.
Y
P
O
USetting the Page Layout
Turn the <5> dial to select the page
layout, then press <0>.
X The print setting screen will reappear.
C
Item
Description
Bordered
The print will have white borders along the edges.
Borderless
The print will have no borders. If your printer cannot print
borderless prints, the print will have borders.
Borderedc
The shooting information* will be imprinted on the border on
9x13cm and larger prints.
xx-up
Option to print 2, 4, 8, 9, 16, or 20 images on one sheet.
20-upc
35-upp
On A4 or Letter size paper, 20 or 35 thumbnails of the images
ordered through DPOF (p.199) will be printed.
• [20-upc] will have the shooting information* imprinted.
Default
The page layout will vary depending on the printer model or its settings.
* From the Exif data, the camera name, lens name, shooting mode, shutter speed, aperture,
exposure compensation amount, ISO speed, white balance, etc., will be imprinted.
193
wPrinting
effects.
4 SetSettheasprinting
necessary. If you need not set
any printing effects, go to step 5.
Turn the <5> dial to select the item
on the upper right, then press <0>.
If the <e> icon is displayed next to
<z>, you can also adjust the
printing effect (p.196).
Next, turn the <5> dial to select the
desired printing effect, then press
<0>.
Printing Effect
Description
Y
P
O
EOn
The image will be printed according to the printer’s standard
colors. The image’s Exif data is used to make automatic
corrections.
EOff
Same as the printing characteristics turned “On”. No automatic
correction will be performed.
EVIVID
The image will be printed with higher saturation to produce
more vivid blues and greens.
ENR
The image noise is reduced before printing.
0 B/W
Prints in black-and-white with true blacks.
C
0 Cool tone Prints in black-and-white with cool, bluish blacks.
0 Warm tone Prints in black-and-white with warm, yellowish blacks.
zNatural
Prints the image in the actual colors and contrast. No automatic
color adjustments are applied.
zNatural M
The printing characteristics are the same as the “Natural”
setting. However, this setting enables finer printing adjustments
than with “Natural.”
EDefault
The printing will differ depending on the printer. For details, see
the printer’s instruction manual.
* The screen display may differ depending on the printer.
* When you change the printing effects, it is reflected in the image displayed
on the upper left. Note that the printed image might look slightly different
from the displayed image which is only an approximation. This also
applies to [Brightness] and [Adjust levels] on page 196.
194
wPrinting
the date and file number
5 Set
imprinting.
Set as necessary.
Turn the <5> dial to select <I>,
then press <0>.
Turn the <5> dial to select the
desired setting, then press <0>.
of copies.
6 SetSettheasnumber
necessary.
Turn the <5> dial to select <R>,
then press <0>.
Turn the <5> dial to select the
number of copies, then press <0>.
Y
P
O
7 StartTurnprinting.
the <5> dial to select [Print],
C
then press <0>.
X The printing will start.
For details on trimming, see page 197.
The [Default] setting for printing effects and other options are the
printer’s own default settings as set by the printer’s manufacturer. See
the printer’s instruction manual to find out what the [Default] settings are.
When imprinting the shooting information c (p.193) for images shot at
H2, H3 ISO speeds during ISO speed range expansion, the ISO speed
setting may not be correctly printed.
Depending on the image’s file size and image size, it may take some
time for the printing to start after you select [Print].
If image tilt correction (p.197) has been applied, it may take longer to
print the image.
To stop the printing, press <0> while [Stop] is displayed, then select [OK].
If you execute the [7 Clear all camera settings] menu option (p.53), all
the settings will revert to the default.
195
wPrinting
e Adjustment of Printing Effects
In step 4 on page 194, select the printing
effect. When the <e> icon is displayed
next to <z>, press the <B>
button. You can then adjust the printing
effect. What can be adjusted or what is
displayed will depend on the selection
made in step 4.
Brightness
The image brightness can be adjusted.
Adjust levels
When you select [Manual], you can change
the histogram’s distribution and adjust the
image’s brightness and contrast.
With the Adjust levels screen displayed, press
the <B> button to change the position of
the <h>. Turn the <5> dial to freely adjust
the shadow level (0 - 127) or highlight level (128 - 255).
C
Y
P
O
kBrightener
Effective in backlit conditions which can make the subject’s face look
dark. When [On] is set, the face will be brightened for printing.
Red-eye corr.
Effective in flash images where the subject has red eye. When [On]
is set, the red eye will be corrected for printing.
The [kBrightener] and [Red-eye corr.] effects will not show on the screen.
When [Detail set.] is selected, you can adjust the [Contrast],
[Saturation], [Color tone], and [Color balance]. To adjust the [Color
balance], use <9>. B is for blue, A is amber, M is magenta, and G is
green. The color in the respective direction will be corrected.
If you select [Clear all], all the printing effect settings will be reverted to
the default.
196
wPrinting
Trimming the Image
Tilt correction
You can crop the image and print only
the trimmed portion as if the image was
recomposed. Do the trimming right
before printing. If you set the trimming
and then set the print settings, you may
have to set the trimming again.
1 On the print setting screen, select [Trimming].
2 Set the trimming frame size, position, and aspect ratio.
Y
P
O
The image area within the trimming frame will be printed. The
trimming frame’s aspect ratio can be changed with [Paper settings].
Changing the trimming frame size
When you press the <u> or <y> button, the size of the trimming
frame will change. The smaller the trimming frame, the larger the
image magnification will be for printing.
Moving the trimming frame
Use <9> to move the frame over the image vertically or horizontally.
Move the trimming frame until it covers the desired image area.
Rotating the frame
Each time you press the <B> button, the trimming frame will
toggle between the vertical and horizontal orientations. This enables
you to create a vertical-oriented print from a horizontal image.
Image tilt correction
By turning the <5> dial, you can adjust the image tilt angle up to
±10 degrees in 0.5-degree increments. When you adjust the
image tilt, the < > icon on the screen will turn blue.
C
3 Press <0> to exit the trimming.
X The print setting screen will reappear.
You can check the trimmed image area on the upper left of the
print setting screen.
197
wPrinting
Depending on the printer, the trimmed image area might not be printed
as you specified.
The smaller you make the trimming frame, the grainier the picture will
look on the print.
While trimming the image, look at the camera’s LCD monitor. If you look
at the image on a TV screen, the trimming frame might not be displayed
accurately.
Handling Printer Errors
If you resolve a printer error (no ink, no paper, etc.) and select [Continue] to
resume printing but it does not resume, operate the buttons on the printer to
resume printing. For details, see the printer’s instruction manual.
Error Messages
If a problem occurs during printing, an error message will appear on the
camera’s LCD monitor. Press <0> to stop printing. After fixing the
problem, resume printing. For details on how to fix a printing problem, refer
to the printer’s instruction manual.
C
Y
P
O
Paper Error
Check whether the paper is properly loaded in the printer.
Ink Error
Check the printer’s ink level, and check the waste ink tank.
Hardware Error
Check for any printer problems other than paper and ink problems.
File Error
The selected image cannot be printed via PictBridge. Images taken with a
different camera or images edited with a computer might not be printable.
198
W Digital Print Order Format (DPOF)
You can set the print type, date imprinting, and file No. imprinting. The
print settings will be applied to all print-ordered images. (They cannot
be set individually for each image.)
Setting the Printing Options
1
Select [Print order].
Under the [3] tab, select [Print
order], then press <0>.
[Set up].
2 Select
Turn the <5> dial to select [Set up],
Y
P
O
then press <0>.
C3
Set the option as desired.
[Print type]
Set the [Print type], [Date], and [File
No.].
Turn the <5> dial to select the
option, then press <0>.
Turn the <5> dial to select the
setting, then press <0>.
[Date]
[File No.]
199
W Digital Print Order Format (DPOF)
Option
Print type
Description
K
L
K
L
Standard Prints one image on one sheet.
Index
Multiple, thumbnail images are printed on one sheet.
Both
Prints both the standard and index prints.
On
Date
Off
File number
On
Off
[On] imprints the recorded date on the print.
[On] imprints the file No. on the print.
the setting.
4 ExitPress
the <7> button.
Y
P
O
X The print order screen will reappear.
Next, select [Sel.Image], [Byn], or
[All image] to order the images to be
printed.
C
Even if [Date] and [File No.] are set to [On], the date or file No. might not
be imprinted depending on the print type setting and printer model.
When printing with DPOF, you must use the card whose print order
specifications have been set. It will not work if you just extract images
from the card and try to print them.
Certain DPOF-compatible printers and photofinishers might not be able
to print the images as you specified. If this happens with your printer,
refer to the printer’s instruction manual. Or check with your photofinisher
about compatibility when ordering prints.
Do not insert into the camera a card whose print order was set by a
different camera and then try to specify a print order. The print order may
not work or may be overwritten. Also, depending on the image type, the
print order may not be possible.
RAW images and movies cannot be print ordered.
With [Index] prints, both the [Date] and [File No.] cannot be set to [On]
at the same time.
200
W Digital Print Order Format (DPOF)
Print Ordering
Sel.Image
Select and order images one by one.
Press the <y> button to display the
three-image view. To return to the singleimage display, press the <u> button.
After completing the print order, press
the <M> button to save the print
order to the card.
Quantity
[Standard] [Both]
Press <0> and a print order for 1 copy
of the displayed image will be placed.
Then turn the <5> dial to set the
number of copies (up to 99) to be printed
for that image.
Total images
selected
Check mark
C
Index icon
Y
P
O
[Index]
Press <0>, and the displayed image will
be included in the index print. The <X>
icon will also appear on the upper left.
Byn
Select [Byn] and select the folder. A print order for 1 copy of all the
images in the folder will be placed. If you select Clear all and a
folder, the print order for all the images in the folder will be canceled.
All image
A print order for 1 copy of all the images in the card will be placed. If
you select Clear all, the print order for all the images in the card will
be canceled.
Note that RAW images and movies will not be included in the print order
even if you set “Byn” or “All image.”
When using a PictBridge printer, print no more than 400 images for one
print order. If you specify more than this, all the images might not be
printed.
201
W Direct Printing with DPOF
With a PictBridge printer, you can easily
print images with DPOF.
1
Prepare to print.
See page 190. Follow the “Connecting the Camera to a Printer”
procedure up to step 5.
2 Under the [3] tab, select [Print order].
3 Select [Print].
Y
P
O
[Print] will be displayed only if the camera is connected to the
printer and printing is possible.
4 Set the [Paper settings]. (p.192)
C
Set the printing effects (p.194) if necessary.
5 Select [OK].
Before printing, be sure to set the paper size.
Certain printers cannot imprint the file No.
If [Bordered] is set, certain printers might imprint the date on the border.
Depending on the printer, the date might look light if it is imprinted on a
bright background or on the border.
Under [Adjust levels], [Manual] cannot be selected.
If you stopped the printing and want to resume printing the remaining
images, select [Resume]. Note that printing will not resume if you stop
the printing and any of the following occurs:
• Before resuming the printing, you changed the print order or deleted
print-ordered images.
• When you set the index, you changed the paper setting before resuming the printing.
• When you paused the printing, the card’s remaining capacity was low.
If a problem occurs during printing, see page 198.
202
Customizing the
Camera
Y
P
O
To suit your shooting preferences, you can fine-tune the
camera’s functions, save the camera settings to a card
or register them to the camera.
C
203
3 Setting Custom Functions
[8].
1 Select
Turn the <6> dial to select the [8] tab.
the group.
2 Select
Turn the <5> dial to select C.Fn I IV, then press <0>.
Custom Function No.
the Custom Function
3 Select
number.
Turn the <5> dial to select the
Custom Function No., then press
<0>.
the setting as desired.
4 Change
Turn the <5> dial to select the
Y
P
O
setting (number), then press <0>.
Repeat steps 2 to 4 if you want to set
other Custom Functions.
At the bottom of the screen, the current
Custom Function settings are indicated
below the respective function numbers.
C
the setting.
5 ExitPress
the <M> button.
X The screen for step 2 will reappear.
Clearing All Custom Functions
In step 2, select [Clear all Custom Func. (C.Fn)] to clear all the
Custom Function settings.
Even if all the Custom Functions are cleared, the setting for [8C.Fn IV -12:
Focusing Screen] will remain unchanged. The registered settings for
[8C.Fn I -16: AE Microadjustment], [8C.Fn I -17: FE
Microadjustment], and [8C.Fn III -7: AF Microadjustment] will also be
retained but [0: Disable] will be set.
204
3 Custom Functions
k Movie
shooting
z LV
shooting
C.Fn I: Exposure
1
Exposure level increments
2
ISO speed setting increments
3
Set ISO speed range
4
Bracketing auto cancel
5
Bracketing sequence
6
Number of bracketed shots
7
Spot metering link to AF point
k
p.208
In M movie
mode
k
In M movie
mode
k
p.209
k
k
8
Safety shift
9
Select usable shooting modes
10
Select usable metering modes
11
Exposure mode in manual exposure
12
Set shutter speed range
13
Set aperture value range
14
Apply shooting/metering mode
15
Flash sync. speed in Av mode
16
AE Microadjustment
17
FE Microadjustment
p.210
C
k
Y
P
O
p.211
p.212
p.213
k
k
k
In M movie
mode
k
In M movie
mode
k
k
(Still photo)
k
The shaded Custom Functions do not function during Live View (LV
shooting) nor movie shooting. (Settings are disabled.)
In k Movie shooting, even if the AF mode has been set to [Quick
mode] (f), it will switch to [Live mode] (d) during movie shooting.
Therefore, the Custom Functions marked “With f”, do not function
during movie shooting. (Functions only before movie shooting.)
205
3 Custom Functions
C.Fn II: Image/Flash exposure/Display
1
Long exposure noise reduction
2
High ISO speed noise reduction
3
Highlight tone priority
4
Auto Lighting Optimizer
5
E-TTL II flash metering
6
Shutter curtain sync.
7
Flash firing
8
Viewfinder info. during exposure
9
LCD panel illumination during Bulb
10
INFO. button when shooting
C.Fn III: Autofocus/Drive
z LV
shooting
k Movie
shooting
k
(Still photo)
p.214
k
(Still photo)
k
k
p.215
k
k
k
p.216
C
1
USM lens electronic MF
2
AI Servo tracking sensitivity
3
AI Servo 1st/2nd image priority
4
AI Servo AF tracking method
5
Lens drive when AF impossible
Y
P
O
p.217
k
k Movie
shooting
z LV
shooting
k
p.218
p.219
With f
6
Lens AF stop button function
p.220
Except 4 (With f
only for some settings)
7
AF Microadjustment
p.221
With f
8
AF expansion with selected point
p.222
With f
9
Multi-controller while metering
10
Selectable AF point
11
Switch to registered AF point
12
AF point auto selection
206
p.223
p.224
With f
With 2+f
With f
3 Custom Functions
13
AF point display during focus
14
AF point brightness
15
AF-assist beam firing
16
Orientation linked AF point
17
Mirror lockup
18
Continuous shooting speed
19
Limit continuous shot count
With f
With f
p.225
With f
With f
p.226
k
p.227
Shutter button/AF-ON button
2
AF-ON/AE lock button switch
k
p.227
Y
P
O
3
Quick Control Dial in metering
4
Assign SET button
5
Tv/Av setting for Manual exposure
6
Dial direction during Tv/Av
7
Av setting without lens
8
WB + media/image size setting
9
H button function
10
Button function when 5 <OFF>
11
Start movie shooting
12
Focusing screen
13
Timer length for timer
14
Shortened release time lag
15
Add aspect ratio information
16
Add image verification data
C
k Movie
shooting
z LV
shooting
C.Fn IV: Operation/Others
1
k
p.228
k
1,3: With f
k+2,4: M movie mode
p.229
p.230
k (In M)
k
In M movie
mode
k
In M movie
mode
p.231
k
k
p.232
p.233
p.234
[Timer after release]
only
k
(Still photo)
k
(Still photo)
207
3 Custom Function Settings
Custom Functions are organized in four groups based on the function
type: C.Fn I: Exposure, C.Fn II: Image/Flash exp (exposure)/Disp
(Display), C.Fn III: Autofocus/Drive, and C.Fn IV: Operation/Others.
Note that some Custom Function numbers differ from the
EOS-1D Mark III’s Custom Functions.
C.Fn I: Exposure
C.Fn I -1
Exposure level increments
0: 1/3-stop set 1/3-stop compensation
1: 1-stop set
1/3-stop compensation
Sets full-stop increments for the shutter speed and aperture.
2: 1/2-stop set 1/2-stop compensation
Sets 1/2-stop increments for the shutter speed, aperture, and exposure
compensation.
Y
P
O
If 2 is set, the viewfinder and the top LCD panel display for 1/2-stop
increments will change as follows: “ ” → “
”.
C.Fn I -2
0: 1/3-stop
C.Fn I -3
C
ISO speed setting increments
1: 1-stop
Set ISO speed range
Disable:
Enable:
The settable ISO speed range will be 100 - 12800.
The settable ISO speed will range from the highest ISO speed
to the lowest ISO speed set with [Register].
Register: The highest ISO speed can be registered within 100 to H3
(102400), and the lowest ISO speed can be registered within L
(50) to H2 (51200). After entering the settings, select [Apply].
If you want to set the ISO speed range expansion in the same way as
other EOS cameras, set the upper limit to [H1], [H2], or [H3], and the
lower limit to [L].
Even if C.Fn I -3 is set to L as the lower limit, L cannot be selected during
manual exposure movie shooting (ISO 50).
208
3 Custom Function Settings
C.Fn I -4
Bracketing auto cancel
0: On
The AEB and WB-BKT settings will be canceled if you set the power
switch to <2> or clear the camera settings. AEB will also be
canceled when bulb exposure is set or the flash is ready to fire.
1: Off
The AEB and WB-BKT settings will be retained even when the power
switch is set to <2>. (When the flash is ready, AEB will be canceled.
However, the AEB amount will be retained in memory.)
C.Fn I -5
Bracketing sequence
The AEB shooting sequence and white balance bracketing sequence can
be changed.
0: 0, -, +
1: -, 0, +
2: +, 0, -
Y
P
O
WB Bracketing
B/A Direction
M/G Direction
0 : Standard exposure 0 : Standard white balance 0 : Standard white balance
- : Decreased exposure - : Blue bias
- : Magenta bias
+ : Increased exposure + : Amber bias
+ : Green bias
AEB
C
C.Fn I -6
Number of bracketed shots
The number of shots taken with AEB and white balance bracketing can be
changed from the usual 3 shots to 2, 5, or 7 shots. When C.Fn I -5-0 is set,
the bracketed shots will be taken as shown in the table below.
0: 3 shots
2: 5 shots
1: 2 shots
3: 7 shots
(1-stop increments)
0: 3 shots
1: 2 shots
2: 5 shots
3: 7 shots
1st shot 2nd shot 3rd shot 4th shot 5th shot 6th shot 7th shot
Standard (0)
-1
+1
Standard (0)
-1
Standard (0)
-2
-1
+1
+2
Standard (0)
-3
-2
-1
+1
+2
+3
209
3 Custom Function Settings
C.Fn I -7
Spot metering link to AF point
0: Disable (use center AF point)
1: Enable (use active AF point)
If [8C.Fn III -10: Selectable AF point] (p.223) is set to [1: 19 points],
[2: 11points], [3: Inner 9 points] or [4: Outer 9 points], spot metering
linked to the selected AF point is possible. With automatic AF point
selection, spot metering will be at the viewfinder center.
If C.Fn III -10 is set to [0: 45 points], spot metering at the center will be set
even if C.Fn I -7 is set to [1: Enable (use active AF point)].
C.Fn I -8
Safety shift
0: Disable
1: Enable (Tv/Av)
This works in the shutter-priority AE (s) and aperture-priority AE (f)
modes. When the subject’s brightness changes erratically and the
correct autoexposure cannot be obtained, the camera will change the
exposure setting automatically to obtain a correct exposure.
2: Enable (ISO speed)
This works in the Program AE (d), shutter-priority AE (s), and
aperture-priority AE (f) modes. When the subject’s brightness
changes erratically and the correct autoexposure cannot be obtained,
the camera will change the ISO speed automatically to obtain a correct
exposure.
C
Y
P
O
Even if the exposure settings settable range has been changed with
C.Fn I -3,12,13, the safety shift will override it when necessary to obtain
the correct exposure.
With settings 1 and 2, safety shift also works with flash.
C.Fn I -9
Select usable shooting modes
Disable: All the shooting modes (a, s, f, d, BULB) will be
selectable.
Enable: Only the shooting modes set with [Register] will be selectable.
Register: To make a shooting mode unselectable, uncheck the checkmark
<X>. After entering the settings, select [Apply].
210
3 Custom Function Settings
C.Fn I -10
Select usable metering modes
Disable: All the metering modes (q: Evaluative, w: Partial, r: Spot,
e: Center-weighted average) will be selectable.
Enable: Only the metering modes set with [Register] will be selectable.
Register: To make a metering mode unselectable, uncheck the checkmark
<X>. After entering the settings, select [Apply].
C.Fn I -11
Exposure mode in manual exposure
You can set the metering mode to be used in the manual exposure mode.
0: Specified metering mode
3: Spot metering
1: Evaluative metering
4: Center-weighted average
2: Partial metering
With settings 1 to 4, you cannot change the metering mode by pressing the
<Q> button during shooting.
C.Fn I -12
Y
P
O
Set shutter speed range
C
Disable: The settable shutter speed range will be 1/8000 sec. to 30 sec.
Enable: The settable shutter speed will range from the highest shutter
speed to the lowest shutter speed set with [Register].
Register: The highest shutter speed can be registered within 1/8000 sec.
to 15 sec., and the lowest shutter speed can be registered within
30 sec. to 1/4000 sec. After entering the settings, select [Apply].
C.Fn I -13
Set aperture value range
Disable: The settable aperture will range from the camera-attached lens’
maximum aperture to minimum aperture.
Enable: The settable aperture will range from the smallest to largest
aperture set with [Register].
Register: The smallest aperture can be registered within f/91 to f/1.4, and
the largest aperture can be registered within f/1.0 to f/64. After
entering the settings, select [Apply].
211
3 Custom Function Settings
C.Fn I -14
Apply shooting/metering mode
While holding down the <A> (AE lock) button, you can switch to the
registered setting (shooting mode, metering mode, shutter speed, aperture,
or exposure compensation).
Disable: Pressing the <A> button will lock the exposure (AE lock).
Enable: By holding down the <A> button, you can instantly switch to the
registered setting.
Register: Set the desired setting for the AE lock button: Shooting mode,
metering mode, shutter speed, aperture, or exposure
compensation.
When you select [Register], [With AE lock button (AF on/AF
off)] will be displayed where you can set the <A> AE lock button
to also execute AF or not. Select [AF on/AF off] to register the
setting to the camera.
Y
P
O
This setting cannot be registered if the shooting mode is set to “Bulb”.
C.Fn I -15
Flash sync. speed in Av mode
C
You can set the flash-sync speed for flash photography in the aperturepriority AE (f) mode.
0: Auto
The flash sync speed is set automatically within a range of 1/300 sec. to
30 sec. to suit the scene’s brightness. High-speed sync can also be
used.
1: 1/300-1/60 sec. auto
Prevents the sync speed from being set too slow under low-light
conditions. It is effective for preventing subject blur and camera shake.
However, while the subject will be properly exposed with the flash, the
background may come out dark.
2: 1/300 sec. (fixed)
The flash-sync speed is fixed to 1/300 sec. This more effectively
prevents subject blur and camera shake than with setting 1. However,
the background may come out darker than with setting 1.
When 1 or 2 is set, high-speed sync cannot be used with an external
Speedlite.
212
3 Custom Function Settings
C.Fn I -16
AE Microadjustment
Normally, this adjustment is not required. Do this adjustment
only if necessary. Note that doing this adjustment may prevent
correct exposure from being achieved.
You can fine adjust the camera’s standard exposure level. The adjustment
can help if the camera’s “standard exposure” always seems to be
underexposed or overexposed.
With setting 1 selected, press the <B> button to display the adjustment
screen.
0: Disable
1: Enable
The adjustment can be made up to ±1 stop
in 1/8-stop increments. If the image tends to
be underexposed, set the adjustment to the
+ side. Or to the - side if the image tends to
be overexposed.
C.Fn I -17
Y
P
O
FE Microadjustment
C
Normally, this adjustment is not required. Do this adjustment
only if necessary. Note that doing this adjustment may prevent
the correct flash exposure from being obtained.
You can fine adjust the camera’s standard flash exposure level. The
adjustment can help if the camera’s “standard flash exposure” (without
flash exposure compensation) always seems to be underexpose or
overexpose the subject.
With setting 1 selected, press the <B> button to display the adjustment
screen.
0: Disable
1: Enable
The adjustment can be made up to ±1 stop
in 1/8-stop increments. If the subject tends
to be underexposed, set the adjustment to
the + side. Or to the - side if the subject
tends to be overexposed.
213
3 Custom Function Settings
C.Fn II: Image/Flash exposure/Display
C.Fn II -1
Long exposure noise reduction
0: Off
1: Auto
For 1 sec. or longer exposures, noise reduction is performed
automatically if noise typical of long exposures is detected. This [Auto]
setting is effective in most cases.
2: On
Noise reduction is performed for all exposures of 1 sec. or longer. The
[On] setting may be effective for noise that cannot be detected or
reduced with the [Auto] setting.
With setting 1 and 2, after the picture is taken, the noise reduction
process may take the same amount of time as the exposure. During the
noise reduction, shooting is still possible as long as the maximum burst
indicator in the viewfinder shows “1” or higher.
At ISO 1600 and higher, noise might be more pronounced with setting 2
than with setting 0 or 1.
With setting 2, if a long exposure is shot during Live View display, “BUSY” will be
displayed during the noise reduction process and the Live View display will not
appear until the noise reduction is completed. (You cannot take another picture.)
C
C.Fn II -2
Y
P
O
High ISO speed noise reduction
Reduces the noise generated in the image. Although noise reduction is applied at all
ISO speeds, it is particularly effective at high ISO speeds. At low ISO speeds, the
noise in the shadow areas is further reduced. Change the setting to suit the noise level.
0: Standard
2: Strong
1: Low
3: Disable
With setting 2, the maximum burst for continuous shooting will greatly decrease.
This function does not work with movies. However, the noise reduction
setting will be applied to still photos taken during movie shooting.
If you playback a RAW or RAW+JPEG image with the camera or print
the image directly, the effect of the high ISO speed noise reduction may
look minimal. You can check the noise reduction effect or print noisereduced images with Digital Photo Professional (provided software).
214
3 Custom Function Settings
C.Fn II -3
Highlight tone priority
0: Disable
1: Enable
Improves the highlight detail. The dynamic range is expanded from the
standard 18% gray to bright highlights. The gradation between the grays
and highlights becomes smoother.
With setting 1, noise in the shadow areas may be slightly more pronounced
than usual.
With setting 1, the settable ISO speed range will be 200 - 12800.
Also, <H> will be displayed on the top LCD panel and in the viewfinder.
C.Fn II -4
Auto Lighting Optimizer
Y
P
O
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically.
For details on the Auto Lighting Optimizer, see page 81.
0: Standard
2: Strong
1: Low
3: Disable
C.Fn II -5
C
E-TTL II flash metering
0: Evaluative flash metering
Fully automatic flash photography for all conditions, from low light to
daylight fill-flash.
1: Average flash metering
The entire metered area is averaged. Since automatic flash exposure
compensation will not be executed, you may have to set it yourself
depending on the scene. This also applies if you use FE lock.
215
3 Custom Function Settings
C.Fn II -6
Shutter curtain sync.
0: 1st-curtain synchronization
1: 2nd-curtain synchronization
The flash fires immediately before the exposure ends. When this is
combined with a slow sync speed, you can create a trail of light such as
from car headlights at night.
This Custom Function can be used to obtain 2nd-curtain sync effects
even with EX-series Speedlites which do not have this feature.
If 1 is set and you press the shutter button completely, note that the flash
will fire a total of two times right before the exposure ends.
When using 2nd-curtain sync, set the shutter speed to 1/50 sec. or
slower. If the shutter speed is 1/60 sec. or faster, 1st-curtain sync will be
applied even if 1 is set.
C.Fn II -7
Flash firing
Y
P
O
Enables or disables the firing of an external flash or non-Canon flash
connected to the PC terminal.
0: Enable
1: Disable
Convenient when you want to use the external flash’s AF-assist beam
only. Note that whether or not the AF-assist beam is emitted depends on
the C.Fn III -15 setting.
C
C.Fn II -8
Viewfinder info. during exposure
0: Disable
1: Enable
The viewfinder information will be displayed even during an exposure.
Displays the exposure setting, number of remaining shots, etc., during
continuous shooting.
When the shooting mode is set to “Bulb”, even if setting 1 is set, it will not
take effect.
216
3 Custom Function Settings
C.Fn II -9
LCD panel illumination during Bulb
0: Off
1: On during Bulb
If the LCD panel illumination is on (p.116) and you take a bulb exposure,
the illumination will continue until the bulb exposure ends. This is
convenient when you are taking a bulb exposure in low light and want to
check the exposure time.
C.Fn II -10
INFO. button when shooting
You can change what is displayed on the LCD monitor when you press the
<B> button while the camera is ready to shoot.
0: Displays shooting functions (p.23)
Displays shooting functions as found on the
top LCD panel and in the viewfinder.
While the shooting settings are displayed,
you can press the <W> <o>
<Q> <Y> <Z> <O> or <S>
button to display the respective function
screen and turn the <6> or <5> dial to
change the setting.
C
Y
P
O
1: Displays camera settings (p.246)
Displays the camera settings.
217
3 Custom Function Settings
C.Fn III: Autofocus/Drive
C.Fn III -1
USM lens electronic MF
The USM lens electronic MF can be enabled or disabled when you use any
of the following lenses.
EF50mm f/1.0L USM, EF85mm f/1.2L USM,
EF85mm f/1.2L II USM, EF200mm f/1.8L USM,
EF300mm f/2.8L USM, EF400mm f/2.8L USM,
EF400mm f/2.8L II USM, EF500mm f/4.5L USM,
EF600mm f/4L USM, EF1200mm f/5.6L USM,
EF28-80mm f/2.8-4L USM
0: Enable after One-Shot AF
After focus is achieved in One-Shot AF, electronic MF is enabled. If C.Fn
IV -1-2/3 is set, it is also enabled before focus is achieved.
1: Disable after One-Shot AF
After focus is achieved in One-Shot AF, electronic MF is disabled. If
C.Fn IV -1-2/3 is set, it is possible before focus is achieved.
2: Disable in AF mode
Electronic MF is disabled in the AF mode.
C.Fn III -2
C
Y
P
O
AI Servo tracking sensitivity
During focusing in AI Servo AF mode, the AF sensitivity for tracking subjects (or
obstacles) moving into the AF points can be set to one of five levels.
If it is set toward [Slow], interruptions by any obstacles will be less
disruptive. It makes it easier to keep tracking the target subject.
If it is set toward [Fast], it will be easier to focus any subject which suddenly
enters the picture from the side. Convenient when you want to successively
photograph multiple subjects located at random distances.
C.Fn III -3
AI Servo 1st/2nd image priority
When AI Servo AF is used with continuous shooting, you can change the
Servo’s operation characteristics and shutter-release timing.
0: AF priority/Tracking priority
For the first shot, focusing the subject is given priority. For the second and following
shots during continuous shooting, focus-tracking of the subject is given priority.
1: AF priority/Drive speed priority
For the first shot, focusing the subject is given priority. During continuous shooting,
the continuous shooting speed is given priority over the focus-tracking of the subject.
218
3 Custom Function Settings
2: Release/Drive speed priority
For the first shot, shutter release is given priority over focusing the
subject. During continuous shooting, the continuous shooting speed is
given priority more than with setting 1.
3: Release/Tracking priority
For the first shot, shutter release is given priority over focusing the
subject. For the second and following shots during continuous shooting,
focus-tracking of the subject is given priority.
C.Fn III -4
AI Servo AF tracking method
In the AI Servo AF mode while you are focus-tracking a subject, the camera
can either continue focusing the target subject even if a closer subject
(closer than at the main focus point) suddenly appears in the picture, or the
camera can switch to focus the closer subject.
* Main focus point = With automatic AF point selection: Center AF point
With manual AF point selection + AF point expansion (C.Fn III -81/2/3): Manually-selected AF point
Y
P
O
0: Main focus point priority
The active AF point will switch to the main focus point and start focusing
the closer subject. Convenient when you always want to focus the
closest subject.
1: Continuous AF track priority
Any closer subject appearing in the picture will be ignored as an
obstruction. The main focus point does not take priority, so the tracking
of the target subject can continue and switch to an adjacent AF point
based on the preceding focusing result. Convenient when obstacles
such as telephone poles appear in front of the target subject.
C
C.Fn III -5
Lens drive when AF impossible
If focus cannot be achieved with autofocus, the camera can either keep
trying to focus or stop.
0: Focus search on
1: Focus search off
Prevents the camera from becoming grossly out of focus as it attempts
to focus again. Especially convenient with super telephoto lenses which
can become extremely out of focus.
219
3 Custom Function Settings
C.Fn III -6
Lens AF stop button function
* The AF stop button is provided only on super telephoto IS lenses.
0: AF stop
1: AF start
AF operates only while the button is pressed. While you hold down the
button, AF will not work on the camera.
2: AE lock
When the button is pressed, AE lock is applied. Convenient when you
want to focus and meter at different parts of the picture.
3: AF point: M 9 Auto/Auto 9 Center
In the manual AF point selection mode, the button instantly switches to
automatic AF point selection (among 45 AF points) while you hold it
down. Convenient when you are no longer able to focus track a moving
subject with a manually-selected AF point in the AI Servo AF mode.
In the automatic AF point selection mode, the button selects the center
AF point only while you hold it down.
4: ONE SHOT z AI SERVO
In the One-Shot AF mode, the camera switches to AI Servo AF mode
only while you hold down the button. And in the AI Servo AF mode, the
camera switches to One-Shot AF mode only while you hold down the
button.
Convenient when you need to keep switching between One-Shot AF
and AI Servo AF for a subject which keeps moving and stopping.
5: IS start
With the lens’ IS switch already <ON>, the Image Stabilizer operates
when you press the button. The Image Stabilizer will not operate when
you press the shutter button halfway.
6: Switch to registered AF point
While holding down the AF Stop button, press the <I> button to
switch to the registered AF point. Press it again to switch to the previous
AF point. To register the AF point, see page 224.
7: Spot AF
The focusing line sensor’s active area is made narrower to enable a
narrower part to be focused. This works in all AF modes and with any AF
point selection method. It is especially convenient during manual AF
point selection. However, since it is difficult to keep the AF point on a
moving subject, focusing might be difficult. With spot AF, the AF point
will blink brighter than usual.
C
220
Y
P
O
3 Custom Function Settings
C.Fn III -7
AF Microadjustment
Normally, this adjustment is not required. Do this adjustment
only if necessary. Note that doing this adjustment may prevent
correct focusing from being achieved.
You can make fine adjustments for the AF’s
point of focus. It can be adjusted in ±20 steps
(-:
Forward / +:
Backward).
The adjustment amount of one step varies
depending on the maximum aperture of the
lens. Adjust, shoot, and check the focus,
then repeat to adjust the AF’s point of focus.
With setting 1 or 2 selected, press the <B> button to view the register
screen. To cancel all the registered adjustments, press the <L> button.
0: Disable
1: Adjust all by same amount
The same adjustment amount is applied to
all lenses.
C
Y
P
O
2: Adjust by lens
An adjustment can be set individually for
any particular lens. Adjustments for up to 20
lenses can be registered in the camera.
When a lens whose focus adjustment has
been registered is attached to the camera,
its point of focus will be shifted accordingly.
If adjustments for 20 lenses have already been registered and you want
to register an adjustment for another lens, select a lens whose
adjustment can be overwritten or deleted.
When you adjust, shoot, and check the focus to make the adjustment, set the
image size to JPEG Large and the JPEG quality (compression) to 8 or higher.
It is best to make the adjustment at the actual place where you will shoot.
This will make the adjustment more precise.
With setting 2, if an Extender is used, the adjustment will be registered
for the lens and Extender combination.
AF adjustment cannot be done during Live View shooting in Live and u
Live modes.
221
3 Custom Function Settings
C.Fn III -8
AF expansion with selected point
During manual AF point selection, it is possible to activate the AF points
surrounding the selected AF point for AF. This function works in both the
One-Shot AF and AI Servo AF modes.
Convenient when it is difficult to track a moving subject with just one
manually-selected AF point. If the manually-selected AF point cannot
focus, focusing will be done with the expanded AF points.
0: Disable
1: Left/right AF point
The points on the immediate left and right (or top and bottom for a
vertical shot) of the manually-selected AF point become active.
2: Surrounding AF points
The adjacent AF points surrounding the manually-selected AF point
become active.
3: All 45 points area
In the AI Servo AF mode, the autofocus will center on the manuallyselected AF point with the row of six AF points right above and below the
AF point and the three AF points on the immediate left and right will also
become active (total of eighteen AF points). If the subject moves to
another AF point within the expanded AF points, the expanded AF will
center on that AF point. Since all 45 AF points will operate, as long as
the subject is within the Area AF frame, it will be focused at all times.
In the One-Shot AF mode, if focus cannot be achieved with the manuallyselected AF point, focusing will be done with the remaining 44 AF points.
C
Y
P
O
Even when C.Fn III -10-1/2/3/4 is set, the AF point expansion will take effect.
In AI Servo AF mode, first focus with the manually-selected AF point.
If there are two manually-selected AF points and setting 1 is set, the AF point
on the left and right of the two AF points will become active. If setting 2 is set,
up to eight AF points adjacent to the two AF points will become active.
The AF point expansion centers on the selected AF point. Therefore, if a peripheral
AF point is selected, the AF point expansion will be smaller as shown below.
Expanded by one AF
point on the left/right
Selected AF point
222
Expanded by one
AF point all around
Expansion points
All 45 AF points
can be used
3 Custom Function Settings
C.Fn III -9
Multi-controller while metering
0: Off
1: AF point selection
During viewfinder shooting while the metering is active, you can select
the AF point directly with <9> instead of pressing the <S> button first.
C.Fn III -10
Selectable AF point
You can change the number of manually-selectable AF points. During
automatic AF point selection, all 45 AF points will be selectable regardless
of the setting below.
0: 45 points
1: 19 points
Sets the same manually-selectable 19 points as with the EOS-1D Mark
III.
2: 11 points
Sets 11 manually-selectable AF points.
3: Inner 9 points
Sets 9 manually-selectable inner AF points.
4: Outer 9 points
Sets 9 manually-selectable outer AF points.
C
Y
P
O
The AF point selection sequence is shown below:
Automatic selection
Automatic selection
Automatic
selection
Automatic selection
Automatic selection
[Outer 9 points]
Automatic selection
[Inner 9 points]
Automatic selection
Automatic
selection
[11 points]
Automatic selection
Automatic selection
[19 points]
223
3 Custom Function Settings
C.Fn III -11
Switch to registered AF point
You can instantly switch to the registered AF point with <9> or the <w>
button while the metering timer is active. The AF will operate when the
switch is made.
0: Disable
1: Switch with <9>
By pressing <9>, you can switch to the registered AF point. Press it
again to switch to the previous AF point.
2: Only while <A> is pressed
You can switch to the registered AF point only while you hold down the
<A> button. When you release the <A> button, the camera will return
to the original AF point.
Registering the AF point
You can register an AF point you use frequently.
1. Select the AF point to be registered. (p.97)
2. While holding down the <S> button, press the <Z> button.
• [ -- -- ] HP: Automatic selection, SEL [ ] : Center AF point,
SEL HP : Off-center AF point
If you change the C.Fn III -10 setting, the registered AF point will be
canceled. The camera will switch to the center AF point.
You cannot register multiple AF points.
C
C.Fn III -12
Y
P
O
AF point auto selection
For AF point selection, you can enable or disable automatic selection.
The setting before the slash (/) applies to the <5> dial’s function while the
metering timer is active with C.Fn IV -3-1/3 set. And the setting after the
slash applies to the <6> dial’s function when the <S> button is pressed.
0: 5direct:disable/6:enable
When metering is active, the <5> dial cannot select automatic
selection. You can select automatic selection with <6>.
1: 5direct:disable/6:disable
Automatic selection cannot be selected.
2: 5direct:enable/6:enable
When metering is active, the <5> dial can select automatic selection.
You can select automatic selection with <6>.
224
3 Custom Function Settings
C.Fn III -13
AF point display during focus
0: On
1: Off
The AF point will not light in red other than during AF point selection.
2: On (when focus achieved)
During AF, the manually-selected AF point will no longer light faintly.
After AF starts, the AF point will light only when it achieves focus.
C.Fn III -14
AF point brightness
0: Normal
1: Brighter
Makes the AF point light up brighter in red.
C.Fn III -15
AF-assist beam firing
Y
P
O
Enables or disables the EOS-dedicated Speedlite’s AF-assist beam.
0: Enable
The external Speedlite will emit the AF-assist beam when necessary.
1: Disable
2: IR AF assist beam only
Among external Speedlites, only those which have an infrared AF-assist
beam will be able to emit the beam. Set this if you do not want the AF
assist to be emitted as small flashes.
C
The external Speedlite’s Custom Function [AF-assist beam firing] set to
[Disabled] will override this Custom Function’s 0 and 2 settings. The AFassist beam will not be emitted.
225
3 Custom Function Settings
C.Fn III -16
Orientation linked AF point
You can either use the same AF point or a different AF point for vertical and
horizontal shooting.
0: Same for both vertical/horizontal
The same AF point is used for both vertical and horizontal shooting.
1: Select different AF points
A different AF point can be set separately for vertical and horizontal
shooting. The camera’s orientation is detected automatically and the set
AF point switches automatically.
If 1 is set, select separately the AF point (p.97) for the vertical (grip
up and down) and horizontal orientations. The AF point selected for
the respective orientations will be recorded in the camera.
If 1 is set and the camera settings are cleared (p.53), the AF points set for
the vertical and horizontal orientations will be canceled and the center AF
point will be selected.
C.Fn III -17
Y
P
O
Mirror lockup
See page 118 for the mirror lockup procedure.
0: Disable
1: Enable
2: Enable: Down with SET (button)
C
With setting 1 and 2, the <2> icon will appear on the top LCD panel.
C.Fn III -18
Continuous shooting speed
Disable: Continuous shooting will be enabled:
<o>: Approx. 10 fps, <p>: Approx. 3 fps
Enable: The continuous shooting speed set with [Register] will be enabled.
Register: <o> can be set within 2 fps to 10 fps, and <p> can be set
within 1 fps to 9 fps. After entering the settings, select [Apply].
226
3 Custom Function Settings
C.Fn III -19
Limit continuous shot count
Disable: Continuous shooting is not limited to any number of shots.
Continuous shooting will be possible up to the current maximum
burst displayed.
Enable: The continuous shooting will be limited to the number of shots set
with [Register] after which the shooting will stop automatically.
Register: The continuous shot count can be limited between 2 to 99. After
entering the settings, select [Apply].
C.Fn IV: Operation/Others
C.Fn IV -1
Shutter button/AF-ON button
0: Metering + AF start
Y
P
O
1: Metering + AF start/AF stop
Pressing the <p> button during AF will stop the AF operation.
2: Metering start/Meter + AF start
This is useful for subjects which keep moving and stopping repeatedly.
In the AI Servo AF mode, you can press the <p> button to
repeatedly start or stop the AI Servo AF operation. The exposure is set
at the moment the picture is taken. Thus, the optimum focusing and
exposure will always be achieved as you wait for the decisive moment.
3: AE lock/Metering + AF start
Convenient when you want to focus and meter at different parts of the
picture. Press the <p> button to meter and autofocus, and press
the shutter button halfway to attain AE lock.
4: Metering + AF start/Disable
The <p> button will not function.
C
C.Fn IV -2
AF-ON/AE lock button switch
0: Disable
1: Enable
The functions of the <p> and <A/y> buttons will be switched
between them.
227
3 Custom Function Settings
C.Fn IV -3
Quick Control Dial in metering
The Quick Control Dial’s function while the metering is active can be
changed.
0: Exposure compensation/Aperture
1: AF point selection
You can select the AF point directly with the <5> dial without first
pressing the <S> button. While metering is active, turning the <5>
dial will select a horizontal AF point. Automatic selection cannot be
selected. However, if C.Fn III -12-2 has also been set, automatic
selection can be selected.
Press the <O> button and turn the <6/5> dial to set the exposure
compensation or the aperture for manual exposure.
2: ISO speed
You can turn the <5> dial to change the ISO speed in real-time.
3: AF point selection + O z S
You can select the AF point directly with the <5> dial without first
pressing the <S> button. While metering is active, turning the <5>
dial will select a horizontal AF point. Automatic selection cannot be
selected. However, if C.Fn III -12-2 has also been set, automatic
selection can be selected.
The functions of the <O> and <S> buttons will be switched between
them. By holding down the <S> button and turning the <6> dial, you
can set the exposure compensation or aperture.
4: ISO speed + O z Z
You can turn the <5> dial to change the ISO speed in real-time.
The functions of the <O> and <Z> buttons will be switched between
them. By holding down the <Z> button and turning the <6> dial,
you can set the exposure compensation or aperture.
C
228
Y
P
O
3 Custom Function Settings
C.Fn IV -4
Assign SET button
You can assign a frequently-used function to <0>. Press <0> when the
camera is shooting-ready.
0: Normal (disabled)
1: White balance
While looking at the rear LCD panel, you can change the white balance.
2: Image size
While looking at the rear LCD panel, you can change the card and
image size.
3: ISO speed
While looking at the top LCD panel or in the viewfinder, you can change
the ISO speed.
4: Picture Style
The Picture Style screen will appear.
5: Record func. + media/folder
The [5 Record func+media/folder sel.] menu will appear.
6: Menu display
Assigns the same function as the <M> button.
7: Image playback
Assigns the same function as the <x> button.
C
Y
P
O
If the camera has been set to enable Live View shooting (p.126) or movie
shooting (p.142), the Live View or movie shooting will override all of the
above settings 1 to 7.
C.Fn IV -5
Tv/Av setting for Manual exposure
0: Tv=6/Av=5
1: Tv=5/Av=6
Convenient when you use studio flash and frequently change the
aperture.
Also, when you use AEB in the manual exposure mode, the shutter
speed can stay fixed while only the aperture is shifted for AEB. The
shutter speed can also be set by pressing the <O> button and turning
the <6/5> dial.
229
3 Custom Function Settings
C.Fn IV -6
Dial direction during Tv/Av
0: Normal
1: Reverse direction
The dial’s turning direction for setting the shutter speed and aperture
can be reversed.
In the manual exposure mode, the direction of the <6> and <5>
dials will be reversed. In other shooting modes, the <6> dial will be
reversed. The <5> dial’s turning direction will be the same for the
manual exposure mode and exposure compensation.
C.Fn IV -7
Av setting without lens
0: Disable
1: Enable
You can set the aperture with the camera even while the lens is
detached. For studio photography when the aperture is already
determined, you can set the aperture beforehand.
C.Fn IV -8
Y
P
O
WB + media/image size setting
C
When you press the <B> button to select or set the white balance,
card, or image size, you can choose to do it with the rear LCD panel or with
the menu screen.
0: Rear LCD panel
1: LCD monitor
When you press the <B> button, the menu screen will appear. Each
time you press the button, the screen will change to display the [White
balance], [Image size], and [Record func+media/folder sel.].
Even with setting 1, if you press the <B> button during Live View or
movie shooting, you can set the settings above while looking at the rear
LCD panel.
230
3 Custom Function Settings
C.Fn IV -9
H button function
0: Protect (hold: Record memo)
When you hold down the <H> button for 2 sec., you can start
recording a voice memo. When you let go of the button, the voice memo
recording will stop.
1: Record memo (Protect: Disabled)
When you press the <H> button, you can start recording a voice
memo immediately. When you let go of the button, the voice memo
recording will stop. To protect an image, use the [3 Protect images]
menu option.
2: Play memo (hold: Record memo)
Plays the voice memo appended to the image. Press the <H> button
to play the voice memo. When you hold down the <H> button for 2
sec. during image playback, you can start recording a voice memo.
When you let go of the button, the voice memo recording will stop. To
protect an image, use the [3 Protect images] menu option.
C.Fn IV -10
Y
P
O
Button function when 5 <OFF>
0: Normal (enable)
1: Disable 6,5,Multi-controller
When the power switch is set to <1>, the <6>, <5>, and <9>
will be disabled from setting anything. The shutter button can still be
used to shoot.
This prevents any settings to be changed inadvertently, so it is
convenient when you keep shooting with the same settings.
C
Even with setting 1, if the power switch is set to <J>, you can use <6>,
<5>, and <9> to change settings.
231
3 Custom Function Settings
C.Fn IV -11
Start movie shooting
0: Default (from LV)
1: Quick start (<I> button)
If the [6 Live View/Movie func. set.] menu option has been set to
enable movie shooting (p.142), press the <I> button to start shooting
a movie immediately while the camera is ready to shoot.
C.Fn IV -12
Focusing Screen
If you change the focusing screen, change this setting to match the
focusing screen type. This is to obtain the correct exposure.
0: lEc-C IV
Standard focusing screen (Laser-matte).
1: lEc-A, B, C, C II, C III, D, H, I, L
For Laser-matte screens.
2: pEc-S
For Super Precision Matte screens.
3: kEc-N, R
For New Laser-matte screens.
C
Y
P
O
About Super Precision Matte Ec-S and Maximum Lens Aperture
This focusing screen is optimized for f/1.8 to f/2.8 lenses.
If the lens maximum aperture is brighter than f/1.8, the center spot
metering circle and Area AF frame might become difficult to see.
Also, if the lens maximum aperture is slower than f/2.8, the viewfinder
will look darker.
Since the Ec-A, Ec-B, Ec-I, and Ec-L focusing screens have a prism at
the center, correct exposures cannot be obtained with evaluative
metering and center spot metering. Use either center-weighted average
metering or AF point-linked spot metering (except the center AF point).
To change the focusing screen, refer to the instructions that come with
the focusing screen.
232
3 Custom Function Settings
C.Fn IV -13
Timer length for timer
How long the function setting remains in effect after you let go of the
respective button can be changed.
Disable: The timer length is set to the default.
Enable: The timer length is set to the time set with [Register].
Register: You can set the 6-sec. and 16-sec. timer length and the timer
length after the shutter release. The timer length can be set to 0
sec. to 59 sec. or 1 min. to 60 min. After entering the settings,
select [Apply].
• 6 sec. timer
This timer length will apply to the AE lock started with the
metering timer/<A> button.
• 16 sec. timer
This timer length will apply to multi-spot metering and FE lock
with the <I> button.
Y
P
O
• Timer after release
Normally, the timer length is 2 sec. after the shutter release. A
longer timer length will make it easier to keep using AE lock for
the same exposure.
C.Fn IV -14
C
Shortened release time lag
Normally, stabilization control is executed for the shutter-release time lag.
This stabilization control can be omitted to make the shutter-release time
lag shorter.
0: Disable
1: Enable
When the aperture is stopped down to no more than 3 stops from the
maximum aperture, the shutter-release time lag will be as much as
approx. 20% shorter than normal.
233
3 Custom Function Settings
C.Fn IV -15
Add aspect ratio information
During Live View and movie shooting, vertical lines corresponding to the
aspect ratio will be displayed. You can thereby simulate still photo framing
for medium- and large-format film sizes such as 6x6 cm, 6x4.5 cm, and 4x5
in.
This aspect ratio information will be appended automatically to the captured
image. (The image will not be saved to the card as a cropped image.)
When the image is transferred to a personal computer and Digital Photo
Professional (provided software) is used, the image will be displayed in the
aspect ratio you specified.
0: Off
4: Aspect ratio 6:7
1: Aspect ratio 6:6
5: Aspect ratio 10:12
2: Aspect ratio 3:4
6: Aspect ratio 5:7
3: Aspect ratio 4:5
Y
P
O
Aspect ratio information will also be appended during viewfinder
shooting.
During image playback on the camera, vertical lines for the respective
ratio will be displayed.
C.Fn IV -16
C
Add image verification data
0: Disable
1: Enable
Data for verifying whether the image is original or not is appended to the
image automatically. When the shooting information of an image
appended with the verification data is displayed (p.157), the <L> icon
will appear.
To verify whether the image is original, the Original Data Security Kit
OSK-E3 (sold separately) is required.
234
3 Registering and Applying Custom Function Settings
You can register up to three sets of Custom Function settings.
You can register a different set of Custom Function settings for different
shooting situations such as sports, snapshots, and landscapes.
You can then instantly apply a registered set of Custom Function
settings.
Registering Custom Function Settings
1
Select [C.Fn setting register/
apply].
Under the [8] tab, select [C.Fn
setting register/apply], then press
<0>.
Y
P
O
[Register].
2 Select
Turn the <5> dial to select
[Register], then press <0>.
C3
Select [Set].
Check the settings.
Turn the <5> dial to select [Set *],
then press <0>.
[OK].
4 Select
Turn the <5> dial to select [OK],
then press <0>.
X The Custom Function settings will be
registered under [Set *], and the
Custom Function settings will be
displayed in a list. To return to the
screen in step 2, press <0>.
235
3 Registering and Applying Custom Function Settings
The settings for [8C.Fn I -16: AE Microadjustment], [8C.Fn I -17: FE
Microadjustment], [8C.Fn III -7: AF Microadjustment], and [8C.Fn IV 12: Focusing Screen] will not be included in the registered Custom
Function settings.
To view the registered Custom Function settings, select [Confirm settings].
The numbers of options changed from the default setting are displayed in
blue. Also, non-numerical settings are displayed by a blue [*].
Applying Custom Function Settings
In step 2, select [Apply] and select the [Set *] of the Custom Function
settings to be applied. Select [OK], and the Custom Function settings
will switch to those registered under Set *.
C
236
Y
P
O
3 Registering My Menu
Under the My Menu tab, you can register up to six menu options and
Custom Functions whose settings you change frequently.
1
Select [My Menu settings].
Under the [9] tab, select [My Menu
settings], then press <0>.
[Register].
2 Select
Turn the <5> dial to select
[Register], then press <0>.
the desired items.
3 Register
Turn the <5> dial to select the item,
C
Y
P
O
then press <0>.
On the confirmation dialog, select [OK]
and press <0> to register the item.
You can register up to six items in My
Menu.
To return to the screen in step 2,
press the <M> button.
About My Menu settings
Sort
You can change the order of the registered items in My Menu. Select
[Sort] and select the item whose order you want to change. Then
press <0>. With [z] displayed, turn the <5> dial to change the
order, then press <0>.
Delete / Delete all items
Deletes the registered items. [Delete] deletes one item at a time,
and [Delete all items] deletes all items.
Display from My Menu
When [Enable] is set, the [9] tab will be displayed first when you
display the menu screen.
237
3 Saving and Loading Camera Settings
The camera’s shooting modes, menus, Custom Functions, and other
camera settings can be saved in the card as a camera settings file.
When this file is loaded by the camera, the saved camera settings will
be applied.
Convenient when you want to load the camera settings from a different
EOS-1D Mark IV body and set the camera in the same way. Or you can
save and load different camera settings for different shooting situations.
Saving Camera Settings
1
Select [Save/load settings on
media].
Under the [7] tab, select [Save/load
settings on media], then press
<0>.
Y
P
O
[Save].
2 Select
Turn the <5> dial to select [Save],
C
then press <0>.
Target media
3
Select [Start].
Turn the <5> dial to select [Start],
then press <0>.
X The camera settings will be saved to
the card, and the screen in step 2 will
reappear.
If you select [Change file name], you
can change the file name (8
characters) and save the file.
For the procedure, see “Changing the
File Name” on page 86. The number
of characters that can be entered will
be different, but the procedure for
entering the file name is the same.
238
3 Saving and Loading Camera Settings
Saved Settings
Shooting functions
Shooting mode + setting, ISO speed, AF mode, AF point, Metering
mode, Drive mode, Exposure compensation amount, Flash
exposure compensation amount
Menu functions
[1] White balance, Custom WB registration, WB SHIFT/BKT,
Color space, Picture Style, Peripheral illumination correction
[2] JPEG quality, Image size, Review time, Beep, Release
shutter without card, External Speedlite control (Flash
function settings)
[4] Highlight alert, AF point display, Histogram, Enlarge display,
Image jump w/6
[5] Auto power off, Record func+media/folder sel. (Recording
function), File numbering, File name setting, Auto rotate
[6] LCD brightness, Live View/Movie function setting
[7] Sensor cleaning (Auto cleaning)
[8] Custom Functions
[9] My Menu
C
Y
P
O
Loading Camera Settings
In step 2, select [Load]. Up to ten camera settings files saved in the
card will be displayed. When you select the desired file, it will be loaded
and the settings will be applied to the camera.
The date/time, language, video system, and C.Fn I -16, C.Fn I -17, C.Fn
III -7, C.Fn IV -12 settings will not be saved.
Up to ten camera settings files can be saved in a card. If the card already
has ten camera settings files, you can either overwrite an existing file or
use another card.
Camera settings files saved with a camera other than the EOS-1D Mark
IV cannot be loaded.
239
3 Registering and Applying Basic Camera Settings
You can set the basic settings of major functions such as the shooting mode,
AF mode, metering mode, and drive mode and register them in the camera.
This is convenient when you want to instantly switch to frequently-used
shooting settings.
Registering Basic Settings
1
Select [Regist/apply basic
settings].
Under the [7] tab, select [Regist/apply
basic settings], then press <0>.
[Register].
2 Select
Turn the <5> dial to select
[Register], then press <0>.
Y
P
O
a function.
3 Select
Turn the <5> dial to select the
function, then press <0>.
Up to nine settings such as the
shooting mode, white balance, and
drive mode can be set.
C
the function as desired.
4 SetTurn
the <5> dial to select the
desired setting, then press <0>.
setting.
5 ExitTothe
exit the setting and return to the screen
in step 2, press the <M> button.
Applying Basic Settings
In step 2, select [Apply]. The camera settings will switch to the registered settings.
[Record func.] will also be set to [Standard], and the exposure
compensation, AEB, flash exposure compensation, and WB correction/BKT
will all be canceled.
240
Reference
Y
P
O
This chapter provides reference information for camera
features, system accessories, etc. The back of this
chapter also has an index to make it easier to look up
needed information.
C
241
Function Availability Table
o: Set automatically k: User selectable
Function
Image size
ISO speed
Viewfinder Shooting
: Not selectable/Disabled
z LV
Shooting
k Movie
Shooting
d
s
f
a Bulb
JPEG
k
k
k
k
k
k
RAW
k
k
k
k
k
k
RAW+JPEG
k
k
k
k
k
k
Auto
k
k
k
k
k
k
k
(Still photo)
Manual
k
k
k
k
k
k
Enabled in M
movie mode
Standard
k
k
k
k
k
k
k
Portrait
k
k
k
k
k
k
k
Landscape
k
k
k
k
k
k
k
Neutral
k
k
k
k
k
k
Faithful
k
k
k
k
k
k
k
Monochrome
k
k
k
k
k
k
k
User Defined
k
k
k
k
k
k
k
k
k
k
k
k
k
Preset WB
k
k
k
k
k
k
k
Custom WB
k
C
k
Auto WB
Y
P
O
k
k
k
k
k
k
k
Color temperature
setting
k
k
k
k
k
k
k
WB correction
k
k
k
k
k
k
k
WB-BKT
k
k
k
k
k
k
sRGB
k
k
k
k
k
k
Adobe RGB
k
k
k
k
k
k
Auto Lighting Optimizer
k
k
k
k
k
k
k
Lens peripheral illumination
correction
k
k
k
k
k
k
k
Long exposure noise reduction
k
k
k
k
k
k
High ISO speed noise reduction
k
k
k
k
k
k
(Still photo)
Highlight tone priority
k
k
k
k
k
k
k
Picture
Style
White
balance
Color
space
242
o
Function Availability Table
o: Set automatically k: User selectable
Viewfinder Shooting
Function
AF
d
s
f
a Bulb
One-Shot
k
k
k
k
k
AI Servo
k
k
k
k
k
Auto
k
k
k
k
k
Manual
k
k
k
k
k
AF point
selection
Exposure
Drive
z LV
Shooting
k Movie
Shooting
With f
With f
Live mode
k
u Live mode
k
k
k
Before
shooting starts
o
With c
Quick mode
Metering
: Not selectable/Invalid
Evaluative
k
k
Partial
k
k
Spot
k
k
Center-weighted
average
k
k
Program shift
k
Exposure
compensation
k
k
AE lock
k
AEB
Depth-of-field preview
C
k
k
k
Y
P
O
k
k
k
k
k
k
k
k
k
o
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
Single shooting
k
k
k
k
k
k
High-speed
continuous shooting
k
k
k
k
k
k
Low-speed
continuous shooting
k
k
k
k
k
k
10-sec. self-timer
k
k
k
k
k
k
2-sec. self-timer
k
k
k
k
k
k
Silent single shooting
k
k
k
k
k
k
FE lock
k
k
k
k
k
k
k
k
k
k
k
k
External
Speedlite Flash exposure
compensation
k
Other than M
movie mode
k
(Still photo)
(Still photo)
243
System Map
ST-E2
270EX
430EX II
580EX II
Macro Ring Lite
MR-14EX
Macro Twin Lite
MT-24EX
Bundled
Accessories
Dioptric Adjustment
Lenses Eg
Anti-Fog
Eyepiece Eg
Eyecup Eg
Wide Strap
L6
C
Y
P
O
Cable
protector
CR2025 lithium battery
Angle Finder C
Hand Strap
E1
EOS DIGITAL Software Instruction
Solution Disk
Manual
Battery Pack LP-E4
Focusing
Screen Ec
244
AC Adapter Kit
ACK-E4
Battery Charger
LC-E4
Car Battery
Cable
CB-570
System Map
Wireless
Controller
LC-5
Remote
Switch
RS-80N3
Timer Remote
Controller
TC-80N3
EF lenses
External microphone
Y
P
O
HDMI Cable HTC-100
Wireless File Transmitter
WFT-E2 II A/B/C/D or
WFT-E2/E2A*
Stereo AV Cable
AVC-DC400ST
Interface Cable
IFC-200U
C
Interface Cable
IFC-500U
TV/Video
USB external media
USB GPS unit
Wireless LAN
access point
Wireless LAN adapter
Ethernet port
Original Data
Security Kit OSK-E3
CF card
USB port
Personal
computer
PC card slot
Windows Vista
Windows XP
Mac OS X
Card reader
PictBridge-compatible printer
SD memory card PCMCIA adapter
* WFT-E2/E2A: Firmware Ver. 2.0.0 or higher
245
B Checking Camera Settings
With [8C.Fn II -10: INFO. button when shooting] (p.217) set to [1:
Displays camera settings], pressing the <B> button while the
camera is ready to shoot will display image-related function settings.
Display the camera settings.
While the camera is ready to shoot,
press the <B> button.
Picture Style (p.66)
Picture Style parameters (p.67)
Color space (p.92)
WB correction (p.79)/
BKT setting (p.80)
Y
P
O
Transfer of images failed*
C
FE Microadjustment
(p.213)
File name setting (p.86)
Date/Time (p.49)
AE Microadjustment
(p.213)
Auto rotate display (p.182)
Number of possible shots for f CF card and g SD card (p.61)
AF Microadjustment (p.221)
* Displayed only if Wireless File Transmitter WFT-E2 II A/B/C/D or WFT-E2/E2A is
used and the transfer of some images failed.
As the default setting, when you press the <B> button, the shooting
function settings will be displayed (p.23).
246
3 Checking the Battery Information
You can check the battery’s condition on a menu screen.
Select [Battery info.].
Under the [6] tab, select [Battery
info.], then press <0>.
The model of the battery or household
power source (sold separately) being
used is displayed.
Next to the battery check (p.35), the
remaining battery capacity is
displayed in 1% increments.
Y
P
O
Shots taken with the current battery.
The number is reset when the battery
is recharged.
C
Battery’s recharge performance level is displayed in
one of three levels (p.29).
(Green): Battery’s recharge performance is
fine.
(Green): Battery’s recharge performance is
slightly degraded.
(Red): Purchasing a new battery is recommended.
Do not use any battery other than Battery Pack LP-E4. Otherwise, the
camera’s full performance may not be attained or malfunction may result.
The shutter count is the number of still photos taken. (Movies are not
counted.)
If [Calibration is recommended when charging battery next time] is
displayed, see page 30.
If you set the power switch to <1/J> and communication with the
battery is faulty for some reason, [Cannot communicate with battery]
will be displayed. Select [OK] and you can continue shooting. In such a
case, the <
> battery check icon will light on the top LCD panel.
247
Replacing the Date/Time Battery
The date/time (back-up) battery’s service life is approx. 5 years. If the
date/time is reset when camera is turned on, replace the back-up
battery with a new CR2025 lithium battery as described below.
The date/time setting will also be reset, so be sure to set the
correct date/time (p.49).
1
Set the power switch to <2>
and remove the battery pack.
The back-up battery is on the ceiling
of the battery compartment.
the back-up battery
2 Remove
cover.
Y
P
O
Use a small screwdriver to loosen the
screw and remove the cover.
Be careful not to lose the cover and
screw.
C
3 Remove the battery.
(+)
a new back-up battery.
4 Install
The plus side of the battery must face
up.
5 Attach the cover.
For the date/time battery, be sure to use a CR2025 lithium battery.
248
Troubleshooting Guide
If there is a problem, first refer to this Troubleshooting Guide on pages
249 to 255. If this Troubleshooting Guide does not resolve the problem,
contact your dealer or nearest Canon Service Center.
Power-Related Problems
The battery cannot be recharged with the battery charger provided.
Do not recharge any battery pack other than a genuine Canon Battery
Pack LP-E4.
The battery charger’s <CAL/CHARGE> lamp blinks in red.
The charger’s lamp blinks three times.
See pages 30 and 31.
Y
P
O
The camera does not operate even when the power switch is set to <1>.
The battery is not properly installed in the camera (p.32).
Recharge the battery (p.28).
Make sure the card slot cover is closed (p.36).
C
The access lamp still blinks even when the power switch is set to <2>.
If the power is cut off while an image is being recorded to the card, the
access lamp will still continue to light/blink for a few seconds. When
the image recording is completed, the power will turn off automatically.
The battery becomes exhausted quickly.
Use a fully-charged battery (p.28).
The battery performance might have degraded. See the [6 Battery
info.] menu option to check the battery’s performance level (p.247). If
the battery’s performance level has degraded, purchase a new battery.
If you keep displaying the shooting function setting screen (p.23) or
using Live View shooting or movie shooting (p.125, 141) for a
prolonged period, the number of possible shots will decrease.
249
Troubleshooting Guide
The camera turns off by itself.
Auto power off is in effect. If you do not want auto power off to take
effect, set [5 Auto power off] to [Off].
Shooting-Related Problems
The lens cannot be attached.
The camera cannot be used with EF-S lenses (p.39).
The card cannot be used.
If a card error message is displayed, see page 38 or 256.
Y
P
O
No images can be shot or recorded.
The card is not properly inserted (p.36).
If you are using an SD card, set the write-protect switch upward (p.36).
If the card is full, replace the card or delete unnecessary images to
make room (p.36, 179).
If you try to focus in One-Shot AF mode while the focus confirmation
light <o> in the viewfinder blinks, a picture cannot be taken. Press the
shutter button halfway again to focus, or focus manually (p.41, 95,
100).
C
The image is out of focus.
Set the lens focus mode switch to <AF> (p.39).
To prevent camera shake, hold the camera still and press the shutter
button gently (p.40, 41).
If the lens has an Image Stabilizer, set the IS switch to <1>.
250
Troubleshooting Guide
A darker exposure was set with exposure
compensation, but the image looks bright.
Set [8C.Fn II -4: Auto Lighting Optimizer] to [3: Disable]. If it is set
to [Standard/Low/Strong], the image might still come out bright even
if you set a darker exposure with manual exposure, exposure
compensation, or flash exposure compensation (p.81, 215).
The maximum burst during continuous shooting is lower.
Set [8C.Fn II -2: High ISO speed noise reduction] to one of the
following settings: [Standard/Low/Disable]. If it is set to [Strong], the
maximum burst will greatly decrease (p.214).
If you shoot a subject which has fine detail (field of grass, etc.), the file
size will be larger and the actual maximum burst might be lower than
the number mentioned on page 61.
ISO 100 cannot be set.
C
Y
P
O
If [8C.Fn II -3: Highlight tone priority] is set to [Enable], the
settable ISO speed range starts from ISO 200. If [Disable] is set, ISO
100 can be set (p.215).
When I use the <f> mode with flash, the shutter speed becomes slow.
If you shoot at night when the background is dark, the shutter speed
becomes slow automatically (slow-sync shooting) so that both the
subject and background are properly exposed. If you do not want a
slow shutter speed to be set, set [8C.Fn I -15: Flash sync. speed in
Av mode] to 1 or 2 (p.212).
The flash does not fire.
Make sure the flash (or PC sync cord) is securely attached to the
camera.
251
Troubleshooting Guide
The flash always fires at full output.
If you use a flash unit other than an EX-series Speedlite, the flash will
always be fired at full output (p.120).
When the [Flash metering mode] flash Custom Function is set to
[TTL (autoflash)], the flash will always be fired at full output (p.124).
Flash exposure compensation cannot be set.
If flash exposure compensation has already been set with the Speedlite,
flash exposure compensation cannot be set with the camera. When the
Speedlite’s flash exposure compensation is canceled (set to 0), flash
exposure compensation can be set with the camera.
High-speed sync cannot be set in the Av mode.
Y
P
O
Set [8C.Fn I -15: Flash sync. speed in Av mode] to [0: Auto]
(p.212).
C
Live View shooting is not possible.
For Live View shooting, use a memory card (a hard disk-type card is
not recommended). A hard disk-type card requires a lower temperature
range for operation than memory cards. If the temperature gets too
high, the Live View shooting may stop temporarily to prevent damage
to the card’s hard disk. When the camera’s internal temperature
decreases, you can resume Live View shooting (p.139).
During Live View shooting, the ISO speed, shutter speed, and
aperture cannot be set.
Set [LV z/k set.] to [Stills] (p.126).
The shutter makes two shooting sounds during Live View shooting.
During Live View shooting, the shutter will make two sounds when you
take a picture (p.127).
252
Troubleshooting Guide
Movies cannot be shot with manual exposure.
Set [LV z/k set.] to [Movies] and set the shooting mode to <a>
(manual exposure) (p.142, 144).
The movie shooting terminates by itself.
If the card’s writing speed is slow, movie shooting may stop
automatically. If you use a CF card, use one with a read/write speed of
at least 8 MB per sec. If you use an SD card, use one with SD Speed
Class 6 “
” or higher. To find out the card’s read/write speed,
see the card manufacturer’s Web site, etc.
If the movie file size reaches 4 GB or if the movie recording time
reaches 29 min. 59 sec., movie shooting will stop automatically.
Y
P
O
The subject looks distorted during movie shooting.
During movie shooting, if you move the camera left or right quickly
(high-speed panning) or shoot a moving subject, the image might look
distorted. There might be less distortion if you shoot in the 1280x720
or 640x480 movie recording size (p.151).
C
When I shoot still photos during movie shooting,
the movie shooting stops.
To shoot still photos during movie shooting, using a CF card
compatible with UDMA transfer rates is recommended.
Setting a smaller image size for still photos and shooting fewer
continuous still photos can also resolve the problem.
The movie cannot play.
Movies edited with a personal computer using the provided software,
etc., cannot be played with the camera.
253
Troubleshooting Guide
When the movie is played, camera operation noise can be heard.
If you operate the camera’s dial or lens during movie shooting, the
respective operation noise will also be recorded. Using an external
microphone (commercially available) is recommended (p.153).
Display & Operation Problems
The LCD monitor does not display a clear image.
If the LCD monitor is dirty, use a soft cloth to clean it.
In low or high temperatures, the LCD monitor display may seem slow
or might look black. It will return to normal at room temperature.
Y
P
O
Part of the image blinks in black.
The [4 Highlight alert] menu option is set to [Enable] (p.157).
A red box is displayed on the image.
C
The [4 AF point disp.] menu option is set to [Enable] (p.158).
The image cannot be erased.
If the image has been protected, it cannot be erased (p.172).
The file name’s first character is an underscore (“_”).
Set the color space to sRGB. If Adobe RGB is set, the first character
will be an underscore (p.92).
The fourth character in the file name changes.
With the [5 File name setting] menu option, select the camera’s
unique file name or the file name registered under User setting 1
(p.86).
254
Troubleshooting Guide
The file numbering does not start from 0001.
If you use a card which already has images recorded, the file
numbering might start from the last image in the card (p.88).
The shooting date and time displayed is incorrect.
The correct date and time has not been set (p.49).
No image appears on the TV screen.
Make sure the stereo AV cable or HDMI cable’s plug is connected all
the way in (p.170, 171).
Set the video OUT format (NTSC/PAL) to the same video format as
the TV (p.170).
Use the stereo AV cable that came with the camera (p.170).
Y
P
O
The voice memo cannot be played.
C
Set [8C.Fn IV -9: H button function] to [2: Play memo (hold:
Record memo)] (p.175, 231).
Sensor Cleaning Problems
The shutter makes a noise during sensor cleaning.
If you selected [Clean nowf], the shutter will make a noise three
times (p.184).
Printing-Related Problems
There are fewer printing effects than listed in the instruction manual.
What is displayed on the screen differs depending on the printer. This
instruction manual lists all the printing effects available (p.194).
255
Error Codes
Error No.
If there is a problem with the camera, an
error message will appear. Follow the onscreen instructions.
Countermeasures
No.
01
02
Error Message & Solution
Communications between the camera and lens is faulty. Clean the
lens contacts.
Y
P
O
Î Clean the electrical contacts on the camera and lens and use a
Canon lens. (p.13, 16)
Card * cannot be accessed. Reinsert/change card * or format card
* with camera.
C
Î Remove and install the card again, replace the card, or format the
card (p.36, 50).
Cannot save images because card * is full. Replace card *.
04
06
Î Replace the card, erase unnecessary images, or format the card
(p.36, 179, 50).
Sensor cleaning is not possible. Turn the camera off and on
again.
Î Operate the power switch (p.34).
10, 20, Shooting is not possible due to an error. Turn the camera off and
30, 40, on again or re-install the battery.
50, 60,
70, 80, Î Operate the power switch, remove and install the battery pack
again, or use a Canon lens (p.34, 32).
99
* If the error still persists, write down the error No. and contact your nearest
Canon Service Center.
256
Specifications
• Type
Type:
Recording media:
Image sensor size:
Compatible lenses:
Lens mount:
Digital, single-lens reflex, AF/AE camera
CF card (Type I or II, UDMA-compatible), SD memory
card, SDHC memory card
* With Wireless File Transmitter WFT-E2 II A/B/C/D or
WFT-E2/E2A (with firmware Ver. 2.0.0 or higher),
recording to USB external media possible
27.9 x 18.6 mm
Canon EF lenses (except EF-S lenses)
(35mm-equivalent focal length is approx.1.3 times the
lens focal length)
Canon EF mount
• Image Sensor
Type:
Effective pixels:
Aspect ratio:
Dust delete feature:
CMOS sensor
Approx. 16.10 megapixels
3:2
Auto, Manual, Dust Delete Data appending
• Recording System
Recording format:
Image type:
Recorded pixels:
Recording function:
Create/select a folder:
File name:
File numbering:
Y
P
O
Design rule for Camera File System 2.0
JPEG, RAW (14-bit Canon original)
RAW+JPEG simultaneous recording possible
Large
: Approx. 16.00 megapixels (4896 x 3264)
Medium 1: Approx. 12.40 megapixels (4320 x 2880)
Medium 2: Approx. 8.40 megapixels (3552 x 2368)
Small
: Approx. 4.00 megapixels (2448 x 1632)
RAW
: Approx. 16.00 megapixels (4896 x 3264)
M-RAW : Approx. 9.00 megapixels (3672 x 2448)
S-RAW : Approx. 4.00 megapixels (2448 x 1632)
Standard, Auto switch media, Rec. separately, Rec. to
multiple
Possible
Preset code, User setting 1, User setting 2
Consecutive numbering, auto reset, manual reset
C
257
Specifications
• Image Processing
Picture Style:
White balance:
Noise reduction:
Automatic image
brightness correction:
Highlight tone priority:
Lens peripheral
illumination correction:
Standard, Portrait, Landscape, Neutral, Faithful,
Monochrome, User Def. 1 - 3
Auto, Preset (Daylight, Shade, Cloudy, Tungsten light,
White fluorescent light, Flash), Custom (total 5 settings),
Color temperature setting (2500-10000K), personal white
balance (total 5 settings)
White balance correction and white balance bracketing
features provided
* Color temperature information transmission enabled
Applicable to long exposures and high ISO speed shots
Auto Lighting Optimizer
Provided
Provided
• Viewfinder
Type:
Coverage:
Magnification:
Eye point:
Built-in dioptric
adjustment:
Eyepiece shutter:
Focusing screen:
Mirror:
Depth-of-field preview:
Y
P
O
Eye-level pentaprism
Vertical/Horizontal approx. 100%
Approx. 0.76x (-1 m-1 diopter with 50mm lens at infinity)
Approx. 20 mm (From eyepiece lens center at -1 m-1)
C
-3.0 - +1.0 m-1 (dpt)
Built-in
Ec-C IV provided, interchangeable
Quick-return type
Provided
• Autofocus
Type:
AF points:
Metering range:
Focus modes:
AF-assist beam:
AF fine adjustment:
258
TTL secondary image-registration, phase detection
45 points (39 cross-type points + 6 points)
EV -1 - 18 (at 23°C/73°F, ISO 100)
One-Shot AF, AI Servo AF, Manual focusing (MF)
Emitted by the dedicated external Speedlite
Enabled with AF Microadjustment
Specifications
• Exposure Control
Metering modes:
63-zone TTL full-aperture metering
• Evaluative metering (linkable to any AF point)
• Partial metering (approx. 13.5% of viewfinder at center)
• Spot metering (approx. 3.8% of viewfinder at center)
• Center-weighted average metering
Metering range:
EV 0 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens,
ISO 100)
Exposure control:
Program AE, shutter-priority AE, aperture-priority AE,
manual exposure, bulb exposure
ISO speed:
Auto (ISO Auto), manual setting within ISO 100 - 12800
(Recommended
(1/3- or whole-stop increments) and expandable to L (ISO
exposure index)
50), H1 (ISO 25600), H2 (ISO 51200), H3 (ISO 102400)
Exposure compensation: Manual and AEB (Settable in combination with manual
exposure compensation)
Settable amount: ±3 stops in 1/3- or 1/2-stop increments
AE lock:
Auto: Applied in One-Shot AF mode with evaluative
metering when focus is achieved
Manual: By AE lock button
Standard exposure
level adjustment:
AE Microadjustment possible
• Shutter
Type:
Shutter speeds:
C
Y
P
O
Electronically-controlled, focal-plane shutter
1/8000 sec. to 30 sec., bulb (Total shutter speed range.
Available range varies by shooting mode.)
X-sync at 1/300 sec. (with EOS-dedicated external Speedlite)
• Drive System
Drive modes:
Single, High-speed continuous, Low-speed continuous, 10sec. self-timer, 2-sec. self-timer, and Silent single shooting
Continuous shooting speed: Max. approx. 10 shots/sec.
Max. burst:
JPEG Large: Approx. 85 shots (Approx. 121 shots)
RAW: Approx. 26 shots (Approx. 28 shots)
RAW+JPEG Large: Approx. 20 shots (Approx. 20 shots)
* Figures are based on Canon’s testing standards
(High-speed continuous, JPEG quality: 8, ISO 100, and
Standard Picture Style) and a 4GB card.
* Figures in parentheses apply to an Ultra DMA (UDMA)
mode 6 16GB card based on Canon’s testing standards.
259
Specifications
• External Speedlite
Compatible flash:
Flash metering:
Flash exposure
compensation:
FE lock:
PC terminal:
Standard flash exposure
level adjustment:
EX-series Speedlite (Functions settable with the camera)
E-TTL II autoflash
±3 stops in 1/3- or 1/2-stop increments
Provided
Provided
FE Microadjustment possible
• Live View Shooting
Focusing:
Metering modes:
Metering range:
Grid display:
Live mode, Face detection Live mode (Contrast
detection), Quick mode (Phase-difference detection)
Manual focusing (5x/10x magnification possible)
Evaluative metering with the image sensor
EV 0 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens,
ISO 100)
Two types
• Movie Shooting
Movie compression:
Y
P
O
MPEG-4 AVC/H.264
Variable (average) bit rate
Audio recording format: Linear PCM
Recording format:
MOV
Recording size
and frame rate:
1920x1080 (Full HD) : 30p/25p/24p
1280x720 (HD)
: 60p/50p
640x480 (SD)
: 60p/50p
* 30p: 29.97 fps, 25p: 25.0 fps, 24p: 23.976 fps, 60p:
59.94 fps, 50p: 50.0 fps
File size:
1920x1080 (30p/25p/24p): Approx. 330 MB/sec.
1280x720 (60p/50p)
: Approx. 330 MB/sec.
640x480 (60p/50p)
: Approx. 165 MB/sec.
Focusing:
Same as focusing with Live View shooting
Metering modes:
Center-weighted average and evaluative metering with
the image sensor
* Automatically set by the focusing mode
EV 0 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens, ISO 100)
Metering range:
Exposure control:
Program AE (exposure compensation possible) for
movies and manual exposure
260
C
Specifications
ISO speed:
Sound recording:
Grid display:
During autoexposure shooting: Automatically set
During manual exposure shooting:
Auto (ISO Auto), manual setting within ISO 100 - 12800
(1/3- or whole-stop increments) and expandable to H1
(ISO 25600), H2 (ISO 51200), H3 (ISO 102400)
Built-in monaural microphone
External stereo microphone terminal provided
Two types
• LCD Monitor
Type:
Monitor size and dots:
Coverage:
Brightness adjustment:
Interface language:
TFT color liquid-crystal monitor
3-in. with approx. 920,000 dots (VGA)
Approx. 100%
Manual (7 levels)
25
• Image Playback
Y
P
O
Image display formats: Single, Single + Info (Image size, shooting information,
histogram), 4-image index, 9-image index, image rotate
possible
Zoom magnification:
Approx. 1.5x - 10x
Image browsing methods: Single image, jump by 10 or 100 images, by shooting
date, by folder, movies only, stills only
Highlight alert:
Overexposed highlights blink
AF point display:
Possible
Slide show:
All images, by folder, by date, movies, or stills
Image protect:
Possible
Copying images:
Possible
Backup:
With Wireless File Transmitter WFT-E2 II A/B/C/D or
WFT-E2/E2A (with firmware Ver. 2.0.0 or higher),
backing up to external media possible
Voice memo:
Recording/playback possible
Movie playback:
Enabled (LCD monitor, video/audio OUT, HDMI OUT)
Built-in speaker
C
• Direct Printing
Compatible printers:
Printable images:
Print ordering:
PictBridge-compatible printers
JPEG and RAW images
DPOF Version 1.1 compatible
261
Specifications
• Custom Functions
Custom Functions:
C.Fn setting registration:
Save camera settings:
Register basic camera
settings:
My Menu registration:
Copyright information:
62 under C.Fn I to IV
Three sets can be registered
Up to ten sets can be registered in a card
Up to nine settings can be set
Up to six options can be registered
Entry and inclusion enabled
• Interface
Audio/video OUT/
Digital terminal:
Analog video (Compatible with NTSC/PAL)/stereo audio
output
For personal computer communication and direct printing
(Hi-Speed USB equivalent)
HDMI mini OUT terminal: Type C (Auto switching of resolution)
External microphone
IN terminal:
3.5mm dia. stereo mini-jack
Remote control terminal: Compatible with N3-type remote control
System extension terminal: Connects to Wireless File Transmitter WFT-E2 II A/B/C/D
or WFT-E2/E2A (with firmware version 2.0.0 or higher)
• Power Source
Battery:
Battery information:
Battery life:
Maximum movie
shooting time:
Date/Time battery:
262
C
Y
P
O
Battery Pack LP-E4 (Quantity 1)
* AC power can be supplied via AC Adapter Kit ACK-E4
(sold separately)
Six-level battery check, remaining capacity, shutter
count, and performance can be checked
With viewfinder shooting:
Approx. 1500 shots at 23°C/73°F, approx. 1200 shots at
0°C/32°F
With Live View shooting:
Approx. 270 shots at 23°C/73°F, approx. 230 shots at
0°C/32°F
* Based on CIPA testing standards
Approx. 2 hr. 40 min. total at 23°C/73°F
Approx. 2 hr. 20 min. total at 0°C/32°F
* With fully-charged Battery Pack LP-E4
One CR2025 lithium battery
Specifications
• Dimensions and Weight
Dimensions (W x H x D): 156 x 156.6 x 79.9 mm / 6.1 x 6.2 x 3.1 in.
Weight:
Approx. 1180 g / 41.6 oz. (body only)
• Operation Environment
Working temperature range: 0°C - 45°C / 32°F - 113°F
Working humidity:
85% or less
• Battery Pack LP-E4
Type:
Rated voltage:
Battery capacity:
Dimensions (W x H x D):
Weight:
Rechargeable lithium ion battery
11.1 V DC
2300 mAh
68.4 x 34.2 x 92.8 mm / 2.7 x 1.3 x 3.7 in.
Approx. 180 g / 6.3 oz. (excluding protective cover)
• Battery Charger LC-E4
Type:
Recharging time:
Rated input:
Charger dedicated to the Battery Pack LP-E4
Approx. 120 min. (for 1 pack)
100 - 240 V AC (50/60 Hz)
12 V / 24 V DC
Rated output:
12.6 V DC, 1.55A
Power cord length:
Approx. 2 m / 6.6 ft.
Working temperature range: 0°C - 40°C / 32°F - 104°F
Working humidity:
85% or less
Dimensions (W x H x D): 155 x 52.3 x 95 mm / 6.1 x 2.1 x 3.7 in.
Weight:
Approx. 340 g / 12.0 oz. (excluding power cord and
protective covers)
C
Y
P
O
All specifications above are based on Canon’s testing standards.
Product specifications and the exterior are subject to change without notice.
If a problem occurs with a non-Canon lens attached to the camera, consult the
respective lens maker.
263
Trademarks
Adobe is a trademark of Adobe Systems Incorporated.
Windows is a trademark or registered trademark of Microsoft Corporation in the
United States and other countries.
Macintosh and Mac OS is a trademark or registered trademark of Apple Inc. in
the United States and other countries.
CompactFlash is a trademark of SanDisk Corporation.
The SDHC logo is a trademark.
HDMI, HDMI logo, and High-Definition Multimedia Interface are a trademark or
registered trademark of HDMI Licensing LLC.
All other corporate and product names and trademarks mentioned in this
manual are the property of their respective owners.
* This digital camera supports Design rule for Camera File System 2.0 and Exif
2.21 (also called “Exif Print”). Exif Print is a standard that enhances
compatibility between digital cameras and printers. By connecting the camera
to an Exif Print-compliant printer, the shooting information is incorporated to
optimize the print output.
C
About MPEG-4 Licensing
Y
P
O
“This product is licensed under AT&T patents for the MPEG-4 standard and may be
used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video
that was encoded only (1) for a personal and non-commercial purpose or (2) by a
video provider licensed under the AT&T patents to provide MPEG-4 compliant video.
No license is granted or implied for any other use for MPEG-4 standard.”
* Notice displayed in English as required.
264
Use of genuine Canon accessories is recommended
This product is designed to achieve excellent performance when used with
genuine Canon accessories. Canon shall not be liable for any damage to this
product and/or accidents such as fire, etc., caused by the malfunction of nongenuine Canon accessories (e.g., a leakage and/or explosion of a battery
pack). Please note that this warranty does not apply to repairs arising out of the
malfunction of non-genuine Canon accessories, although you may request
such repairs on a chargeable basis.
C
Y
P
O
Image Conversion Factor
Since the image sensor size is
smaller than the 35mm film
format, it will look like the lens
focal length is increased by 1.3x.
Image sensor size
(27.9 x 18.6 mm / 1.10 x 0.73 in.)
35mm image size
(36 x 24 mm / 1.42 x 0.94 in.)
265
Safety Warnings
Follow these safeguards and use the equipment properly to prevent injury, death,
and material damage.
Preventing Serious Injury or Death
• To prevent fire, excessive heat, chemical leakage, and explosions, follow the
safeguards below:
- Do not use any batteries, power sources, and accessories not specified in this
booklet. Do not use any home-made or modified batteries.
- Do not short-circuit, disassemble, or modify the battery pack or back-up battery. Do
not apply heat or apply solder to the battery pack or back-up battery. Do not expose
the battery pack or back-up battery to fire or water. And do not subject the battery
pack or back-up battery to strong physical shock.
- Do not install the battery pack or back-up battery in reversed polarity (+ –). Do not
mix new and old or different types of batteries.
- Do not recharge the battery pack outside the allowable ambient temperature range
of 0°C - 40°C (32°F - 104°F). Also, do not exceed the recharging time.
- Do not insert any foreign metallic objects into the electrical contacts of the camera,
accessories, connecting cables, etc.
• Keep the back-up battery away from children. If a child swallows the battery, consult a
physician immediately. (Battery chemicals may harm the stomach and intestines.)
• When disposing of a battery pack or back-up battery, insulate the electrical contacts
with tape to prevent contact with other metallic objects or batteries. This is to prevent
fire or an explosion.
• If excessive heat, smoke, or fumes are emitted during battery pack recharging,
immediately unplug the battery charger from the power outlet to stop the recharging
and prevent a fire.
• If the battery pack or back-up battery leaks, changes color, deforms, or emits smoke or
fumes, remove it immediately. Be careful not to get burned in the process.
• Prevent any battery leakage from contacting your eyes, skin, and clothing. It can
cause blindness or skin problems. If the battery leakage contacts your eyes, skin, or
clothing, flush the affected area with lots of clean water without rubbing it. See a
physician immediately.
• During the recharging, keep the equipment away from the reach of children. The cord
can accidentally choke the child or give an electrical shock.
• Do not leave any cords near a heat source. It can deform the cord or melt the
insulation and cause a fire or electrical shock.
• Do not fire the flash at someone driving a car. It may cause an accident.
• Do not fire the flash near a person’s eyes. It may impair the person’s vision. When
using flash to photograph an infant, keep at least 1 meter away.
• Before storing the camera or accessory when not in use, remove the battery pack and
disconnect the power plug. This is to prevent electrical shock, heat generation, and
fire.
• Do not use the equipment where there is flammable gas. This is to prevent an
explosion or fire.
C
266
Y
P
O
• If you drop the equipment and the casing breaks open to expose the internal parts, do
not touch the internal parts due to the possibility of electrical shock.
• Do not disassemble or modify the equipment. High-voltage internal parts can cause
electrical shock.
• Do not look at the sun or an extremely bright light source through the camera or lens.
Doing so may damage your vision.
• Keep the camera from the reach of small children. The neck strap can accidentally
choke the child.
• Do not store the equipment in dusty or humid places. This is to prevent fire and
electrical shock.
• Before using the camera inside an airplane or hospital, check if it is allowed.
Electromagnetic waves emitted by the camera may interfere with the plane’s
instruments or the hospital’s medical equipment.
• To prevent fire and electrical shock, follow the safeguards below:
- Always insert the power plug all the way in.
- Do not handle a power plug with wet hands.
- When unplugging a power plug, grasp and pull the plug instead of the cord.
- Do not scratch, cut, or excessively bend the cord or put a heavy object on the cord.
Also do not twist or tie the cords.
- Do not connect too many power plugs to the same power outlet.
- Do not use a cord whose insulation has been damaged.
• Occasionally unplug the power plug and use a dry cloth to clean off the dust around
the power outlet. If the surrounding is dusty, humid, or oily, the dust on the power outlet
may become moist and short-circuit the outlet to cause a fire.
C
Y
P
O
Preventing Injury or Equipment Damage
• Do not leave equipment inside a car under the hot sun or near a heat source. The
equipment may become hot and cause skin burns.
• Do not carry the camera around while it is attached to a tripod. Doing so may cause
injury. Also make sure the tripod is sturdy enough to support the camera and lens.
• Do not leave a lens or lens-attached camera under the sun without the lens cap
attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.
• Do not cover or wrap the battery-recharging apparatus with a cloth. Doing so may trap
heat within and cause the casing to deform or catch fire.
• If you drop the camera in water or if water or metal fragments enter inside the camera,
promptly remove the battery pack and back-up battery. This is to prevent fire and
electrical shock.
• Do not use or leave the battery pack or back-up battery in a hot environment. Doing so
may cause battery leakage or a shorter battery life. The battery pack or back-up
battery can also become hot and cause skin burns.
• Do not use paint thinner, benzene, or other organic solvents to clean the equipment.
Doing so may cause fire or a health hazard.
If the product does not work properly or requires repair, contact
your dealer or your nearest Canon Service Center.
267
Digital Camera Model DS126211 Systems
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
class B digital devices, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The cable with the ferrite core provided with the digital camera must be used
with this equipment in order to comply with Class B limits in Subpart B of Part
15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise
specified in the manual. If such changes or modifications should be made, you
could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
C
Y
P
O
This Class B digital apparatus complies with Canadian ICES-003.
When connecting to and using a household power outlet, use only AC
Adapter Kit ACK-E4 (rated input: 100-240 V AC 50/60 Hz, rated output:
12.6 V DC). Using anything else can cause fire, overheating, or
electrical shock.
268
IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS — This manual contains important safety
and operating instructions for Battery Charger LC-E4.
2. Before using the charger, read all instructions and cautionary remarks on
(1) the charger, (2) the battery pack, and (3) the product using the battery
pack.
3. CAUTION — To reduce risk of injury, charge only the Battery Pack LP-E4.
Other types of batteries may burst, causing personal injury and other
damage.
4. Do not expose the charger to rain or snow.
5. Use of an attachment not recommended or sold by Canon may result in
fire, electric shock, or personal injury.
6. To reduce risk of damage to electric plug and cord, pull by plug rather than
by cord when disconnecting charger.
7. Make sure cord is located so that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
8. Do not operate the charger with damaged cord or plug - replace them
immediately.
9. Do not operate the charger if it has received a sharp blow, been dropped,
or otherwise damaged in any way; take it to a qualified serviceman.
10. Do not disassemble the charger; take it to a qualified serviceman when
service or repair is required. Incorrect reassembly may result in a risk of
electric shock or fire.
11. To reduce risk of electric shock, unplug charger from outlet before
attempting any maintenance or cleaning.
C
Y
P
O
MAINTENANCE INSTRUCTION
Unless otherwise stated in this manual, there are no user serviceable parts
inside. Refer servicing to qualified serviceman.
USA and Canada only:
The Lithium ion/polymer battery that powers the product is
recyclable. Please call 1-800-8-BATTERY for information on
how to recycle this battery.
For CA, USA only
Included lithium battery contains Perchlorate Material – special handling may
apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
269
Index
Index
10-sec. or 2-sec. delay .................102
1280x720 ......................................151
1920x1080 ....................................151
1st-curtain sync.............................122
2nd-curtain sync ...........................122
4- or 9-image index display...........159
640x480 ........................................151
A
About servicing .............................265
AC Adapter Kit ................................33
AC power ........................................33
Access lamp .............................19, 38
Adobe RGB.....................................92
AE lock..........................115, 212, 227
AE Microadjustment......................213
AEB.......................................114, 209
AF J Focusing
AF Microadjustment......................221
AF point expansion .......................222
AF start button ................................41
AF stop button ..............................220
AI SERVO (AI Servo AF) ................96
Operation characteristics..........218
Subject tracking sensitivity .......218
Tracking method.......................219
Aperture-priority AE ......................110
Aspect ratio information ................234
Auto ISO .........................................65
Auto Lighting Optimizer ..........81, 215
Auto playback (Slide show) ..........168
Auto power off...........................34, 52
Auto reset .......................................89
Auto rotate of vertical images .......182
Auto switch media...........................57
Autofocus J Focusing
Automatic cleaning .......................184
C
270
Automatic selection (AF) ................ 97
Av (Aperture-priority AE) .............. 110
B
B/W .......................................... 67, 69
Battery J Power
Battery check ......................... 35, 247
Beeper............................................ 52
Black-and-white (printing) ............ 194
Black-and-white image............. 67, 69
Borders (Bordered/Borderless) .... 193
Bracketing ...................... 80, 114, 209
Bulb .............................................. 116
Noise reduction........................ 214
Bulb exposures ............................ 116
Y
P
O
C
Cable........................ 3, 163, 170, 171
Cable protector............................... 26
Camera
Camera shake ......................... 118
Clear camera settings................ 53
Holding the camera.................... 40
Settings display........................ 246
Camera shake................................ 41
Camera shooting-ready............ 41, 45
Caption (name) .............................. 76
Card ................................... 13, 36, 50
Card reminder............................ 52
Format ....................................... 50
Problem ..................................... 38
Center-weighted average
metering ....................................... 104
CF card J Card
Cleaning ....................................... 184
Clear camera settings .................... 53
Clock .............................................. 49
Color space .................................... 92
Index
Color temperature setting ...............78
Color tone ...............................68, 196
Compression rate............................63
Continuous......................................88
Continuous shooting .....................101
Contrast ..................................68, 196
Cool tone (printing) .......................194
Copyright information......................90
Cord ..........................3, 163, 170, 171
Cross-type focusing ........................99
Custom Functions .........................204
Clear all ....................................204
Settings registration..................235
Custom WB.....................................73
D
F
Faithful............................................ 67
FE lock ......................................... 119
FE Microadjustment ..................... 213
FEB .............................................. 123
File name........................................ 86
File number .................................... 88
File size .......................... 61, 152, 157
Filter effect (Monochrome) ............. 69
Firmware Ver. ................................. 48
Flash
Custom Functions .................... 124
External Speedlite ............ 119, 120
FE lock ..................................... 119
Flash exposure compensation ... 119
Shutter sync. (1st/2nd curtain) ... 122
Flash-sync speed............. 120, 212
Function settings...................... 121
Non-Canon flash units ............. 120
Flash exposure compensation ..... 119
Flash mode................................... 122
Flash-sync contacts........................ 17
Focus confirmation light ................. 95
Focus lock ...................................... 95
Focus mode switch......... 39, 100, 138
Focus tracking ................................ 96
Y
P
O
Date/Time .......................................49
Date/time battery replacement....248
DC coupler ......................................33
Default (printing) ...........................193
Depth-of-field preview ...................111
Dial
Main Dial.....................................42
Quick Control Dial.......................43
Digital terminal ..............................190
Dioptric adjustment .........................40
Direct printing J Printing
DPOF ............................................199
Drive mode....................................101
Dust Delete Data...........................185
C
Exposure simulation ..................... 130
EX-series Speedlite ...................... 119
Extension........................................ 87
External media ......................... 22, 46
External Speedlite J Flash
Eyecup ........................................... 40
Eyepiece shutter........................... 117
E
Erase (image) ...............................179
Error codes ...................................256
E-TTL II flash metering .........123, 215
Evaluative metering ......................104
Exposure compensation ...............113
Exposure level increments............208
271
Index
Focusing
AF mode.....................................94
AF point display........................158
AF point selection.......................97
AF-assist beam ........................225
Beeper........................................52
Difficult-to-focus subjects....100, 135
Live View shooting ...........131, 138
Manual focusing ...............100, 138
Out of focus ......................100, 135
Recompose ................................95
Focusing screen ...........................232
Folder Create/Select.......................84
Format (card initialization) ..............50
Frame rate ....................................151
Full HD..........................................141
Full High-Definition .......151, 163, 171
Function availability table..............242
G
Grid display...........................130, 151
H
C
Hand strap ......................................26
HDMI.....................................163, 171
High ISO speed noise reduction ...214
High-Definition ..............151, 163, 171
Highlight alert................................157
Highlight detail loss.......................157
Highlight tone priority ....................215
High-speed continuous shooting ..101
Histogram (Brightness/RGB) ........158
Hot shoe .........................................17
Household power............................33
I
ICC profile.......................................92
Illumination (LCD panel) ...............116
272
Image
AF point display ....................... 158
Auto playback .......................... 168
Auto rotate ............................... 182
Backup....................................... 46
Copying.................................... 176
Erase ....................................... 179
Highlight alert........................... 157
Histogram ................................ 158
Index ........................................ 159
Jump display
(Image browsing) ..................... 160
Magnified view ......................... 161
Manual rotate........................... 162
Playback .................................. 156
Protect ..................................... 172
Shooting information .. 128, 148, 157
View on TV ...................... 163, 170
Image area ................................... 265
Image browsing (Jump display) ... 160
Image dust prevention............ 27, 183
Image review time ........................ 181
Image size...................................... 59
Appended automatically ............ 87
Image verification data ................. 234
Image-recording quality.................. 59
Index display ................................ 159
ISO speed ...................... 64, 146, 208
Automatic setting (Auto) ............ 65
ISO expansion ......................... 208
Y
P
O
J
JPEG.............................................. 59
Jump display (Image browsing) ... 160
L
Landscape...................................... 66
Language ....................................... 49
Large (Image size) ......................... 60
Laser-matte .................................. 232
Index
LCD monitor..............................13, 17
Brightness adjustment ..............180
Image playback ........................156
Menu screen.........................44, 46
Shooting settings display....23, 217
LCD panel .................................21, 22
Illumination ...............................116
Lens
Attaching/Detaching ...................39
Peripheral illumination
correction....................................82
Live View shooting ........................125
Exposure simulation .................130
Face detection Live mode ........132
Grid display...............................130
Information display ...................128
Live mode .................................131
Manual focusing .......................138
Movie shooting .........................141
Possible shots ..........................129
Quick mode ..............................136
Long exposure noise reduction.....214
Low level format..............................51
Low-speed continuous shooting ...101
LV z/k setting ..................126, 142
C
Menu
Menu settings............................. 46
My Menu .................................. 237
Setting operation........................ 45
3 icon......................................... 4
Metered manual flash................... 124
Metering mode ..................... 104, 211
Metering timer .............. 130, 152, 233
MF (Manual focusing)........... 100, 138
Microphone
(Built-in/External).... 19, 143, 152, 174
Mirror lockup................................. 118
Monochrome image.................. 67, 69
Movie............................................ 141
Autoexposure shooting ............ 143
Enjoying ................................... 163
File size.................................... 152
First/last scene trimming .......... 167
Focusing .................................. 143
Frame rate ............................... 151
Information display................... 148
Manual exposure shooting....... 144
Playback .................................. 165
Recording size ......................... 151
Shooting preparation................ 142
Sound recording....................... 152
Still photo shooting................... 149
View on TV....................... 163, 170
M-RAW (Medium RAW) ........... 59, 62
Multi-controller (9).................. 42, 97
Multi-spot metering....................... 105
My Menu....................................... 237
Y
P
O
M
M (Manual exposure) ............112, 144
Magnified view ......................138, 161
Main Dial (6) ...............................42
Manual exposure ..........................112
Manual focusing....................100, 138
Manual reset ...................................89
Manual selection (AF) .....................97
Maximum aperture f/stop (AF) ........98
Maximum burst .........................61, 62
Medium (Image size) ......................60
Medium RAW............................59, 62
Memory card J Card
N
Natural/M (printing)....................... 194
Neutral............................................ 67
Noise reduction ............................ 214
Nomenclature ................................. 16
NR (printing) ................................. 194
273
Index
NTSC ....................................151, 170
Number of AF points.....................223
O
ONE SHOT (One-Shot AF).............95
One-Shot AF...................................95
P
P (Program AE) ............................106
PAL .......................................151, 170
Paper settings (printing)................192
Partial metering.............................104
PC terminal ...................................120
Peripheral illumination correction....82
Personal white balance...................72
PictBridge .....................................189
Picture Style..............................66, 71
Pixels ..............................................60
Playback J Image
Portrait ............................................66
Possible shots...................35, 61, 129
Power
Auto power off ............................52
Battery check......................35, 247
Battery info. ..............................247
Calibration ..................................30
Household power .......................33
Possible shots ..............35, 61, 129
Recharge....................................28
Recharge performance.............247
Switch.........................................34
Precision matte .............................232
Pressing completely........................41
Pressing halfway.............................41
C
274
Printing ......................................... 189
Page layout.............................. 193
Paper settings.......................... 192
PictBridge ................................ 189
Print Order (DPOF).................. 199
Printing effects ................. 194, 196
Tilt correction ........................... 197
Trimming .................................. 197
Program AE.................................. 106
Program shift ........................... 107
Protect.......................................... 172
Q
Quick Control Dial (5) ............ 34, 43
Quick mode .................................. 136
R
Y
P
O
RAW ......................................... 59, 62
RAW+JPEG ................................... 60
Rec. separately .............................. 57
Rec. to multiple .............................. 57
Recharge........................................ 28
Recording func. .............................. 57
Registered AF point ..................... 224
Registering basic camera
settings......................................... 240
Release shutter without card.......... 52
Remote Switch ............................. 117
Rotate (image) ..................... 162, 182
S
Safety shift ................................... 210
Safety warnings............................ 266
Saturation............................... 68, 196
Saving camera settings................ 238
SD card J Card
Self-timer...................................... 102
Sensor cleaning ........... 183, 184, 187
Sepia (Monochrome)...................... 69
Index
0 button ........................................44
Sharpness.......................................68
Shooting information
display...........................128, 148, 157
Shooting mode................................21
Aperture-priority AE ..................110
Bulb ..........................................116
Manual exposure ......................112
Program AE ..............................106
Shutter-priority AE ....................108
Shooting settings display ........23, 217
Shortened (time lag) .....................233
Shutter button .................................41
Shutter sync. .................................122
Shutter-priority AE.........................108
Silent shooting ..............................101
Silent single shooting ....................101
Single image display .....................156
Single shooting .............................101
Slide show.....................................168
Small (Image size) ..........................59
Small RAW................................59, 62
Specifications ................................257
Spot metering................................104
S-RAW (Small RAW) ................59, 62
sRGB ..............................................92
Standard..................................66, 200
Stills J Image
Stopped-down aperture ................111
Strap ...............................................26
Superimposed display...................225
System extension terminal..............18
System map ..................................244
C
Trimming (printing) ....................... 197
Tripod socket .................................. 16
Troubleshooting............................ 249
Tv (Shutter-priority AE)................. 108
U
Ultra DMA (UDMA)................. 37, 150
USB (Digital) terminal................... 190
User defined ............................. 70, 86
V
Vertical/horizontal AF point........... 226
Video system................................ 170
View on TV ........................... 163, 170
Viewfinder....................................... 20
Dioptric adjustment .................... 40
VIVID (printing)............................. 194
Voice memo
Playback .................................. 175
Recording................................. 174
Volume (Movie playback) ............. 166
Y
P
O
W
Warm tone (printing)..................... 194
WB J White balance
WFT settings .................................. 48
White balance................................. 72
Bracketing .................................. 80
Color temperature setting .......... 78
Correction .................................. 79
Custom....................................... 73
Personal ......................................... 72
T
Toning effect (Monochrome) ...........69
Trademarks ...................................264
275
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
U.S.A.
CANON U.S.A. INC.
One Canon Plaza, Lake Success, NY 11042-1198, U.S.A.
For all inquires concerning this product, call toll free in the U.S.
1-800-OK-CANON
CANADA
CANON CANADA INC. HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada
CANON CANADA INC. MONTREAL BRANCH
5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada
CANON CANADA INC. CALGARY OFFICE
2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada
For all inquiries concerning this product, call toll free in Canada
1-800-OK-CANON
EUROPE,
AFRICA &
MIDDLE EAST
CANON EUROPA N.V.
Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands
CANON FRANCE S.A.S.
17,Quai du Président Paul Doumer, 92414 Courbevoie Cedex, France
CANON UK LTD.
Woodhatch Reigate,Surrey RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano 8, 20097 San Donato Milanese, (MI), Italy
CANON Schweiz A.G.
Industriestrasse 12, 8305 Dietlikon, Switzerland
Canon GmbH
Zetschegasse 11, A-1230 Vienna, Austria
CANON España,S.A.
Av. De Europa,6 Alcobendas 28108 Madrid, Spain
CANON Portugal S.A.
Rua Alfredo da Silva,14 Alfragide 2610-016 Amadora, Portugal
C
Y
P
O
CENTRAL &
SOUTH AMERICA
CANON LATIN AMERICA, INC.
703 Waterford Way, Suite 400 Miami, FL 33126,U.S.A.
ASIA
CANON (China) Co., LTD.
15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China
CANON HONGKONG CO., LTD.
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632
CANON KOREA CONSUMER IMAGING INC.
Gangnam Finance Center 17F, 737,Yeoksam-Dong, Gangnam-Gu, Seoul, 135-984, Korea
OCEANIA
CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand
JAPAN
CANON MARKETING JAPAN INC.
16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan
This Instruction Manual booklet is current as of October 2009. For information on
the camera’s compatibility with any accessories and lenses introduced after this
date, contact any Canon Service Center.
CT1-1034-000
© CANON INC. 2009
PRINTED IN JAPAN
Download PDF

advertising