Instruction manual | Canon 6609B074 Digital Camera User Manual

C
Y
P
O
E
Basic Instruction Manual
Introduction
The EOS M is a high-performance, interchangeable-lens digital camera
featuring a fine-detail CMOS sensor with approx. 18.0 effective megapixels,
DIGIC 5, high-precision and high-speed 31-point AF, approx. 4.3 fps
continuous shooting, and Full High-Definition (Full HD) movie shooting.
The camera is highly responsive to any shooting situation, and provides
many features for demanding shots.
Refer to This Manual while Using the Camera to Further
Familiarize Yourself with the Camera
With a digital camera, you can immediately view the image you have
captured. While reading this manual, take a few test shots and see how they
come out. You can then better understand the camera.
To avoid botched pictures and accidents, first read the “Safety Warnings”
(p.96, 97) and “Handling Precautions” (p.8, 9).
Testing the Camera Before Use and Liability
Y
P
O
After shooting, play images back and check whether they have been properly
recorded. If the camera or memory card is faulty and the images cannot be
recorded or downloaded to a computer, Canon cannot be held liable for any
loss or inconvenience caused.
Copyrights
C
Copyright laws in your country may prohibit the use of your recorded images
or copyrighted music and images with music in the memory card for anything
other than private enjoyment. Also be aware that certain public performances,
exhibitions, etc., may prohibit photography even for private enjoyment.
This camera is compatible with SD memory cards, SDHC memory
cards, and SDXC memory cards. In this manual, “card” refers to all these
cards.
* The camera does not come with a card for recording images/
movies. Please purchase it separately.
Cards that can record movies
When shooting movies, use a large-capacity SD card rated SD Speed Class 6
“
” or higher (p.75).
2
Instruction Manuals
This Basic Instruction Manual only explains the camera’s basic
operations and functions for basic shooting with the EOS M attached
with an EF-M lens. For more detailed instructions such as shooting with
EF and EF-S lenses with Mount Adapter EF-EOS M, advanced shooting
and playback procedures, printing photos, and Custom Functions, see
the Camera Instruction Manual in the CD-ROM.
The EOS M’s instruction manuals consist of the following:
Camera Instruction Manual
Y
P
O
Instruction Manual
(CD-ROM)
Camera
Basic Instruction
Manual
C
CD-ROM Contents
Camera Instruction Manual (PDF file)
Explains all the camera’s functions and
operation procedures. Includes also all the
contents in this Basic Instruction Manual.
Accessory Instruction Manual (PDF file)
PDF files for the Lens Instruction Manual
(EF-M18-55mm f/3.5-5.6 IS STM and EFM22mm f/2 STM), Mount Adapter EF-EOS
M Instruction Manual, and Speedlite 90EX
Instruction Manual are provided.
See page 87 on how to view the Instruction Manual (PDF) in
the CD-ROM.
Software
EOS DIGITAL
Solution Disk
(Software CD-ROM)
See pages 87 to 88 for an overview of the software
programs, installation procedure for a personal
computer, and how to view the Software Instruction
Manual CD-ROM.
3
Item Check List
Before starting, check that all the following items have been included with
your camera. If anything is missing, contact your dealer.
Camera
(with body cap)
Battery Pack
LP-E12
(with protective cover)
Neck Strap EM-100DB
EOS DIGITAL
Solution Disk
(Software CD-ROM)
C
Battery Charger
LC-E12/LC-E12E*
Interface Cable
Y
P
O
Instruction Manual
(CD-ROM)
Software
Instruction Manual
(CD-ROM)
Camera Basic Instruction Manual
* Battery Charger LC-E12 or LC-E12E is provided. (The LC-E12E comes with a power
cord.)
If you purchased a Camera Kit, check that all the components are
included. Depending on the Camera Kit, these may include a lens,
Speedlite flash or Mount Adapter EF-EOS M.
4
Conventions Used in this Manual
Icons in this Manual
<5>
: Indicates the Main Dial to be turned.
<Wj/i>/<XL>/<YA>/<ZO>
: Indicates the Main Dial buttons on the top, bottom, left,
or right to be pressed.
<Q/0>
: Indicates the Main Dial to be pressed at the center.
0, 9, 7, 8 : Indicates that the corresponding function remains active
for 4 sec., 6 sec., 10 sec., or 16 sec. respectively after
you let go of the button.
* In this manual, the icons and markings indicating the camera’s buttons, dials, and
settings correspond to the icons and markings on the camera and on the LCD
monitor.
3
: Press the <M> button to set a function.
Y
P
O
? : See the Camera Instruction Manual PDF file for details.
(p.**)
: Reference page number for more information.
: Warning to prevent shooting problems.
C
: Supplemental information.
: Tips or advice for better shooting.
: Problem-solving advice.
Basic Assumptions
The instructions in this manual assume that the power is on (p.25) and the
menu functions and Custom Functions are set to the default settings.
The illustrations in this manual show the camera attached with the EFM18-55mm f/3.5-5.6 IS STM lens as an example.
Certification Logo
Under the [54] tab, if you select [Certification Logo Display] and press <Q/
0>, some of the logos of the camera’s certifications will appear. Other
certification logos can be found in this Instruction Manual, on the camera body,
and on the camera’s package.
5
Contents
Introduction
2
Instruction Manuals .................................................................................... 3
Item Check List........................................................................................... 4
Conventions Used in this Manual............................................................... 5
Handling Precautions ................................................................................. 8
Quick Start Guide ..................................................................................... 10
Nomenclature ........................................................................................... 12
1
Getting Started
19
Charging the Battery ................................................................................ 20
Installing and Removing the Battery and Card......................................... 22
Turning on the Power ............................................................................... 25
Setting the Time Zone, Date and Time .................................................... 27
Y
P
O
Selecting the Interface Language............................................................. 29
Attaching and Detaching a Lens .............................................................. 30
About the Lens Image Stabilizer .............................................................. 32
C
Basic Operation........................................................................................ 34
Quick Control............................................................................................ 36
3 Menu Operations............................................................................ 39
Formatting the Card ................................................................................. 42
Switching the LCD Monitor Display .......................................................... 44
d Using the Touch Screen and Main Dial................................................ 45
2
Scene Intelligent Auto + Basic Zone Modes
47
A Fully Automatic Shooting (Scene Intelligent Auto) ............................ 48
A Full Auto Techniques (Scene Intelligent Auto) .................................. 51
Select a Shooting Mode ........................................................................... 53
C Creative Auto Shooting ...................................................................... 54
2 Shooting Portraits (Portrait)................................................................. 56
3 Shooting Landscapes (Landscape).................................................... 57
6
Contents
4 Shooting Close-ups (Close-up) ........................................................... 58
5 Shooting Moving Subjects (Sports) .................................................... 59
6 Shooting Night Portraits (Night Portrait) (With a Tripod) ..................... 60
F Shooting Night Scenes Handheld (Handheld Night Scene) ................ 61
G Shooting Backlit Scenes (HDR Backlight Control).............................. 62
x Image Playback.................................................................................. 64
Changing the Focusing Method................................................................ 65
x Shooting with the Touch Shutter ........................................................ 73
j Using the Self-timer............................................................................. 74
3
Shooting Movies
4
Image Playback
75
k Shooting Movies................................................................................. 76
Y
P
O
81
d Playing Back with the Touch Screen.................................................... 82
k Playing Movies ................................................................................... 84
5
Instruction Manuals in the CD-ROM and Software Start Guide 86
C
Viewing the Instruction Manual CD-ROM................................................. 87
About the Software ................................................................................... 89
Installing the Software .............................................................................. 90
Software Instruction Manual ..................................................................... 91
Software System Requirements ............................................................... 92
Safety Warnings ....................................................................................... 96
Trademarks
Adobe is a trademark of Adobe Systems Incorporated.
Windows is a trademark or registered trademark of Microsoft Corporation in the
United States and other countries.
Macintosh and Mac OS are trademarks or registered trademarks of Apple Inc. in the
United States and other countries.
SDXC logo is a trademark of SD-3C, LLC.
HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
All other corporate and product names and trademarks mentioned in this manual are
the property of their respective owners.
7
Handling Precautions
Camera Care
This camera is a precision instrument. Do not drop it or subject it to physical
shock.
Do not point the camera-attached lens toward the sun. The sun’s heat can
damage the camera’s internal components.
The camera is not waterproof and cannot be used underwater. If you accidentally
drop the camera into water, promptly consult the nearest Canon Service Center.
Wipe off any water droplets with a dry cloth. If the camera has been exposed to
salty air, wipe it with a well-wrung wet cloth.
Never leave the camera near anything having a strong magnetic field such as a
magnet or electric motor. Also avoid using or leaving the camera near anything
emitting strong radio waves such as a large antenna. Strong magnetic fields can
cause camera incorrect operation or destroy image data.
Do not leave the camera in excessive heat such as in a car in direct sunlight. High
temperatures can cause the camera to malfunction.
The camera contains precision electronic circuitry. Never attempt to disassemble
the camera yourself.
Do not block the shutter operation with your finger, etc. Doing so may cause a
malfunction.
Use a blower to blow away any dust on the lens. Do not use cleaners that contain
organic solvents to clean the camera body or lens. For stubborn dirt, take the
camera to the nearest Canon Service Center.
Do not touch the camera’s electrical contacts with your fingers. This is to prevent
the contacts from corroding. Corroded contacts can cause camera misoperation.
If the camera is suddenly brought in from the cold into a warm room,
condensation may form on the camera and internal parts. To prevent
condensation, first put the camera in a sealed plastic bag and let it adjust to the
warmer temperature before taking it out of the bag.
If condensation forms on the camera, do not use the camera. This is to avoid
damaging the camera. If there is condensation, remove the lens, card and battery
from the camera, and wait until condensation has evaporated before using the
camera.
If the camera will not be used for an extended period, remove the battery and
store the camera in a cool, dry, well-ventilated location. Even while the camera is
in storage, press the shutter button a few times once in a while to check that the
camera is still working.
Avoid storing the camera where there are corrosive chemicals such as a
darkroom or chemical lab.
If the camera has not been used for an extended period, test all its functions
before using it. If you have not used the camera for some time or if there is an
important shoot coming up, have the camera checked by your Canon dealer or
check the camera yourself and make sure it is working properly.
When you detach the lens, the image sensor will be exposed. To prevent
scratching the image sensor, do not touch the image sensor.
C
8
Y
P
O
Handling Precautions
LCD Monitor
Although the LCD monitor is manufactured with very high precision technology
with over 99.99% effective pixels, there may be a few dead pixels among the
remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are
not a malfunction. They do not affect the images recorded.
If the LCD monitor is left on for a prolonged period with the same screen displayed,
screen burn-in may occur where you see remnants of what was displayed. However,
this is only temporary and will disappear when the camera is left unused for a few days.
The LCD monitor display may seem slow in low temperatures, or look black in
high temperatures. It will return to normal at room temperature.
After changing the LCD monitor’s brightness settings, the display may look a little coarse,
depending on the subject. This is not a malfunction and will not affect the recorded image.
Cards
To protect the card and its recorded data, note the following:
Do not drop, bend, or wet the card. Do not subject it to excessive force, physical
shock, or vibration.
Do not touch the card’s electronic contacts with your fingers or anything metallic.
Do not affix any stickers, etc., on the card.
Do not store or use the card near anything having a strong magnetic field such as
a TV set, speakers, or magnet. Also avoid places prone to having static electricity.
Do not leave the card in direct sunlight or near a heat source.
Store the card in a case.
Do not store the card in hot, dusty, or humid locations.
Lens
C
Y
P
O
After detaching the lens from the camera, put down the lens with
the rear end up and attach the lens caps to avoid scratching the
lens surface and electrical contacts.
Contacts
Cautions regarding Prolonged Use
If you use continuous shooting, Live View shooting, or movie
shooting for a prolonged period, the camera may become hot.
Although this is not a malfunction, holding the hot camera for a
long period can cause slight skin burns.
About smudges adhering to the front of the sensor
Besides dust entering the camera from outside, in rare cases lubricant from the
camera’s internal parts may adhere to the front of the sensor. If visible spots still
remain after the automatic sensor cleaning, having the sensor cleaned by a Canon
Service Center is recommended.
About the lens mount
Periodically cleaning the camera’s body and lens mount with a soft lens cleaning cloth
is recommended.
9
Quick Start Guide
1
Insert the battery (p.22).
2
Insert a card (p.22).
3
Attach the lens (p.30).
4
Charging the battery: p.20
With the card’s label facing toward
the front of the camera, insert it into
the card slot.
Y
P
O
Align the lens’ index with the
camera’s index.
C
Press the power button to turn on
the camera, and set <A> (Scene
Intelligent Auto) (p.48).
All the necessary camera settings will
be set automatically.
When the LCD monitor displays the
time zone or date/time setting screen,
see page 27.
10
Quick Start Guide
5
Focus the subject (p.35).
6
Take the picture (p.35).
7
Review the picture (9?).
Aim the LCD monitor’s center over the
subject.
Press the shutter button halfway, and
the camera will focus the subject.
Press the shutter button completely to
take the picture.
C
Y
P
O
The captured image will be displayed
for approx. 2 sec. on the LCD monitor.
To display the image again, press the
<x> button (p.64).
To view the images captured so far, see “Image Playback” (p.64).
After you finish shooting, replace the lens cap to protect the lens.
11
Nomenclature
Speaker (p.84)
<V> Focal plane mark (p.58)
Power button (p.25)
Flash-sync contacts
Shutter button (p.35)
Hot shoe
Microphone
Mode Dial (p.15)
Self-timer lamp/
AF-assist beam
Strap mount
(p.19)
Grip
C
Y
P
O
Remote control
sensor
Terminal cover
EF-M Lens mount index
(p.30)
Contacts (p.9)
Lens mount
Lens release button
(p.31)
Lens lock pin
<Y> External microphone
IN terminal
<D> HDMI mini OUT
terminal
Body cap (p.30)
<q/C>
Audio/video OUT/Digital terminal
Parts whose reference page is not indicated are explained in the Camera
Instruction Manual PDF file.
12
Nomenclature
LCD monitor/Touch screen (p.39, 44/45, 82, 85)
Power/Access lamp (p.24)
<M> Menu button (p.39)
<o> Movie Start/Stop button
(p.76)
<x> Playback button
(p.64)
<Q/0>
Quick Control/
Setting button
(p.36/39)
Tripod socket
C
Y
P
O
<B> Info button
(p.36, 44, 64, 78)
DC Coupler terminal cover
Card/Battery compartment cover (p.22)
<5> Main Dial (p.46)
<Wj/i>
<XL>
<YA>
<ZO>
Drive mode selection button (p.74)
Erase button (9?)
AE lock/FE lock button (9?)
Aperture/Exposure compensation button (9?)
Card slot (p.22)
Battery compartment (p.22)
13
Nomenclature
Screen Display
Number of possible shots
Number of possible shots
during WB bracketing
Self-timer countdown
Maximum burst
Battery check (p.26)
zxcn
e High-speed sync (FP flash)
d FE lock/FEB in-progress
Creative filters
Eye-Fi transmission status*
Shooting mode
Picture Style
AF method (p.65)
c u+Tracking
o FlexiZone - Multi
d FlexiZone - Single
Q Quick Control
AF operation
(9?)
X
One-Shot AF
Servo AF
MF Manual Focus
Image-recording
quality (9?)
73 Large/Fine
83 Large/Normal
74 Medium/Fine
84 Medium/Normal
7a Small 1/Fine
8a Small 1/Normal
b Small 2 (Fine)
c Small 3 (Fine)
1+73
RAW+Large/Fine
1 RAW
C
Y
P
O
Shutter speed
Metering mode
q Evaluative metering
w Partial metering
r Spot metering
e Center-weighted
average metering
Exposure simulation
Magnified view
ISO speed
Highlight tone priority
GPS connection indicator
Digital compass
Exposure level indicator
Exposure compensation amount
Aperture
Image Stabilizer AEB range
<OFF> (only when a lens with IS function is attached)
Main Dial pointer
*: Displayed when an Eye-Fi card is used.
The display will show only the settings currently applied.
14
Auto Lighting
Optimizer (p.47)
AEB/FEB
Touch shutter (p.73)
Drive mode (p.74)
u Single shooting
i Continuous shooting
Q Self-timer:10 sec/
Remote control
l Self-timer:2 sec
q Self-timer:Continuous
White balance
Q Auto
W Daylight
E Shade
R Cloudy
Y Tungsten light
U White
fluorescent light
I Flash
O Custom
Nomenclature
Mode Dial
Switches to <A> Scene Intelligent Auto, <z> Still Photos, or <k>
Movies.
Shoot still photos with <A> or <z>, or shoot
movies with <k>.
<A> Scene Intelligent Auto enables you to just
press the shutter button to take a picture with the
camera taking care of everything to suit the
subject or scene.
With <z> Still photos, you can select Creative
Zone modes or the Basic Zone modes.
Creative Zone
Y
P
O
These modes give you more control for shooting various subjects.
a : Manual exposure
f : Aperture-priority AE
s : Shutter-priority AE
d : Program AE
C
15
Nomenclature
Basic Zone
All you do is press the shutter button. The camera sets everything to suit the
subject or scene.
C : Creative Auto (p.54)
2 : Portrait (p.56)
3 : Landscape (p.57)
4 : Close-up (p.58)
5 : Sports (p.59)
6 : Night Portrait (p.60)
F : Handheld Night Scene (p.61)
G : HDR Backlight Control (p.62)
Movies
Y
P
O
With <k> Movie, you can select Autoexposure or Manual exposure.
k : Movie auto exposure
M : Movie manual exposure
C
16
Nomenclature
Lens
EF-M Lens
(Lens with no focus mode switch and no Image Stabilizer switch.)
* Instructions for EF lens, EF-S lens and Mount Adapter EF-EOS M are in the Camera
Instruction Manual PDF file.
Focusing ring (9?)
Zoom ring (p.31)
Hood mount
Zoom position index (p.31)
Filter thread
(front of lens)
Y
P
O
Lens mount index (p.30)
C
Contacts (p.9)
Use of genuine Canon accessories is recommended
This product is designed to achieve excellent performance when used with genuine
Canon accessories. Canon shall not be liable for any damage to this product and/or
accidents such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note that
this warranty does not apply to repairs arising out of the malfunction of non-genuine
Canon accessories, although you may request such repairs on a chargeable basis.
17
Nomenclature
Battery Charger LC-E12
Charger for Battery Pack LP-E12 (p.20).
Power plug
Charge lamp
Full-charge lamp
Battery pack slot
Y
P
O
IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS.
DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
For connection to a supply not in the U.S.A., use an attachment plug adapter of the
proper configuration for the power outlet, if needed.
Battery Charger LC-E12E
C
Charger for Battery Pack LP-E12 (p.20).
Battery pack slot
Power cord
Full-charge lamp
Charge lamp
18
Power cord socket
This camera was designed so you can truly
enjoy taking photos and capturing the
feeling, the essence of a moment in your
photos.
Photographs are fun and wonderful!
Getting Started
Y
P
O
This chapter explains preparatory steps before you start
shooting and basic camera operations.
Attaching the Strap
C
Fit the strap’s metallic ring over the camera’s strap mount. Use a
coin or similar tool to turn the stopper clockwise until it stops (the
index marks are aligned). Make sure the strap’s metallic ring is not
loose.
Adjust the strap length.
Ð
19
Charging the Battery
1 Remove the protective cover.
the battery.
2 Attach
Align the battery’s h mark with the
battery charger’s g mark.
To detach the battery, follow the above
procedure in reverse.
LC-E12
the battery.
3 Recharge
For LC-E12
Y
P
O
As shown by the arrow, flip out the
battery charger’s prongs and insert the
prongs into a power outlet.
For LC-E12E
LC-E12E
C
Connect the power cord to the charger
and insert the plug into a power outlet.
X Recharging starts automatically and the
charge lamp lights up in orange.
X When the battery is fully recharged, the
full-charge lamp will light up in green.
It takes approx. 2 hours to fully recharge a completely exhausted
battery at 23°C / 73°F. The time required to recharge the battery will
vary greatly depending on the ambient temperature and the battery’s
remaining capacity.
For safety reasons, recharging in low temperatures (5°C - 10°C / 41°F 50°F) will take longer (up to approx. 4 hours).
20
Charging the Battery
Tips for Using the Battery and Charger
Upon purchase, the battery is not fully charged.
Recharge the battery before using.
Recharge the battery on the day before or on the day it is to be used.
Even during storage, a charged battery will gradually drain and lose its
capacity.
After recharging the battery, detach it and disconnect the charger
from the power outlet.
When not using the camera, remove the battery.
If the battery is left in the camera for a prolonged period, a small amount of
power current is released, resulting in excess discharge and shorter
battery life. Store the battery with the protective cover (provided) attached.
Storing the battery when it is fully charged may lower the battery’s
performance.
Y
P
O
The battery charger can also be used in foreign countries.
The battery charger is compatible with a 100 V AC to 240 V AC 50/60 Hz
power source. If necessary, attach a commercially-available plug adapter
for the respective country or region. Do not attach any portable voltage
transformer to the battery charger. Doing so can damage the battery
charger.
C
If the battery becomes exhausted quickly even after being fully
charged, the battery has reached the end of its service life.
Purchase a new battery.
After disconnecting the charger’s power plug, do not touch the prongs for at
least 3 sec.
Do not charge any battery other than a Battery Pack LP-E12.
Battery Pack LP-E12 is dedicated to Canon products only. Using it with an
incompatible battery charger or product may result in malfunction or accidents
for which Canon cannot be held liable.
21
Installing and Removing the Battery and Card
Load a fully charged Battery Pack LP-E12 into the camera. The card (sold
separately) can be an SD, SDHC, or SDXC memory card. SDHC and SDXC
cards with UHS-I can also be used. The captured images are recorded onto
the card.
Make sure the card’s write-protect switch is set upward to enable
writing/erasing.
Installing the Battery and Card
the cover.
1 Open
Slide the lever as shown by the arrows
and open the cover.
the battery.
2 Insert
The battery’s “Canon” logo must be
Y
P
O
toward the camera’s front side as you
insert the battery with the battery
contacts in first.
Insert the battery until it clicks and locks
in place.
Write-protect switch
C
the card.
3 Insert
The card’s label side must be toward
the front of the camera.
Insert it straight down until it stops.
22
Installing and Removing the Battery and Card
the cover.
4 Close
Press the cover until it snaps shut.
When you set the power to <1>, the
number of possible shots (p.26) will be
displayed on the LCD monitor.
Possible shots
Removing the Battery and Card
1 Set the power to <2>.
the cover.
2 Open
Make sure the LCD monitor and
C
Y
P
O
Power/access lamp are off, then open
the cover.
If [Recording...] is displayed, close the
cover.
the battery.
3 Remove
1. Press the battery release lever as
shown by the arrow. 2. Remove the
battery.
To prevent short circuiting of the battery
contacts, be sure to attach the protective
cover (provided, p.20) to the battery.
the card.
4 Remove
Gently push in the card, then let go to
eject it.
Pull the card straight out.
the cover.
5 Close
Press the cover until it snaps shut.
23
Installing and Removing the Battery and Card
After opening the card/battery compartment cover, be careful not to swing it back
further. Otherwise, the hinge may break.
When the Power/access lamp is blinking in orange, it indicates that
images are being written to or read by the card, being erased, or data is
being transferred. Do not open the card/battery compartment cover
during this time. Also, never do any of the following while the Power/
access lamp is blinking in orange. Otherwise, it can damage the image
data, card, or camera.
• Removing the card.
• Removing the battery.
• Shaking or banging the camera around.
If the card already contains recorded images, the image number may not start
from 0001.
If a card-related error message is displayed on the LCD monitor, remove and
reinsert the card. If the error persists, use a different card.
If you can transfer all the images on the card to a computer, transfer all the
images and then format the card with the camera (p.42). The card may then
return to normal.
Do not touch the card’s contacts with your fingers or metal objects.
C
24
Y
P
O
Turning on the Power
If you set the power to <1> and the time zone/date/time setting
screen appears, see page 27 to set the time zone and date/time.
Pressing the power button toggles between
<1> and <2>.
With the power <2>, holding down the
<x> button for 2 sec. or longer will start the
playback mode.
When an EF-M lens is attached to the
camera and the power is off, the aperture
stops down to shut out the light and
protect the inside of the camera. When
you set the power to <1> or <2>,
the aperture makes a small noise as it
opens.
Y
P
O
3 Power-saving Features
C
To save power, the LCD monitor turns off automatically if you do not
operate the camera. If you continue to not operate the camera, the power
will turn off automatically. While the LCD monitor is off, pressing any
camera button or tapping the LCD monitor will turn it on again. If the power
turned off, either press the power button or press the <x> for at least
approx. 2 sec. to turn on the power again.
You can change the LCD monitor auto off time and Camera auto off time
with [LCD auto off] and [Camera auto off] under [52: Power saving]
(9?).
If you set the power to <2> while an image is being recorded to the card,
[Recording...] will be displayed and the power will turn off after the card finishes
recording the image.
25
Turning on the Power
z Checking the Battery Level
When the power is turned on, the battery level will be indicated in one of four
levels.
z : Battery level is sufficient.
x : Battery level is low, but the camera
can still be used.
c : Battery will be exhausted soon.
(Blinks)
n : Recharge the battery.
Battery Life
[Approx. number of shots]
Temperature
At 23°C / 73°F
At 0°C / 32°F
Possible shots
230
200
Y
P
O
The figures above are based on a fully-charged Battery Pack LP-E12 and CIPA
(Camera & Imaging Products Association) testing standards.
C
The number of possible shots will decrease with any of the following
operations:
• Pressing the shutter button halfway for a prolonged period. (Activating the
AF frequently without taking a picture.)
• Using the lens Image Stabilizer.
The number of possible shots may decrease depending on the actual
shooting conditions.
The lens operation is powered by the camera’s battery. Depending on the lens
used, the number of possible shots may be lower.
26
3 Setting the Time Zone, Date and Time
When you turn on the camera for the first time, the Time zone and Date/Time
setting screen will appear. First set the time zone, then set the date and time.
Note that the shooting date/time appended to the captured images will
be based on this date/time setting. Be sure to set the correct date/time.
Set the Time Zone
[London] is set by default.
the menu screen.
1 Display
Press the <M> button.
the [52] tab, select [Time Zone].
2 Under
On the Main Dial, press the <YA>/
<ZO> button to select the [52] tab.
On the Main Dial, press the <Wj/i>/
<XL> button to select [Time Zone],
then press <Q/0>.
Y
P
O
date and time.
3 SetOnthe
the Main Dial, press the <YA>/<ZO>
C
button to enable the selection of the time zone.
Press <Q/0> so <a> is displayed.
On the Main Dial, press the <Wj/i>/
<XL> button to set the time zone, then
press <Q/0>.
On the Main Dial, press the <YA>/<ZO>
button to select [OK], then press <Q/0>.
The menu setting procedure is explained on pages 39-41.
The time displayed on the lower right is the time difference compared with
Coordinated Universal Time (UTC). If you do not see your time zone, set the
time zone while referring to the difference with UTC.
After changing the time zone, check that the correct date/time has been set.
You can also set the daylight saving time with [52: Time zone].
The [52: Time zone] and [52: Date/Time] daylight saving time settings are linked.
Set the Date and Time
the menu screen.
1 Display
Press the <M> button.
27
3 Setting the Time Zone, Date and Time
the [52] tab, select [Date/Time].
2 Under
On the Main Dial, press the <YA>/
<ZO> button to select the [52] tab.
On the Main Dial, press the <Wj/i>/
<XL> button to select [Date/Time], then
press <Q/0>.
and time.
3 SetOnthethedate
Main Dial, press the <YA>/<ZO>
button to select the number to be adjusted.
Press <Q/0> so <a> is displayed.
On the Main Dial, press the <Wj/i>/
<XL> button to set the number, then
press <Q/0> (returns to <b>).
saving time.
4 SetSettheit ifdaylight
necessary.
Y
P
O
On the Main Dial, press the <YA>/
<ZO> button to select [Y].
Press <Q/0> so <a> is displayed.
On the Main Dial, press the <Wj/i>/
<XL> button to select [Z], then press
<Q/0>.
When the daylight saving time is set to
[Z], the time set in step 3 will advance
by 1 hour. If [Y] is set, the daylight
saving time will be canceled and the time
will go back by 1 hour.
C
setting.
5 ExitOnthe
the Main Dial, press the <YA> /
<ZO> button to select [OK], then press
<Q/0>.
X The date/time and daylight saving time
will be set and the menu will reappear.
If you remove the battery or the battery is exhausted, the time zone and date/
time might be reset. If this happens, set the Time zone and Date/Time again.
To synchronize the seconds, in step 5, press <Q/0> at 0 sec.
28
3 Selecting the Interface Language
the menu screen.
1 Display
Press the <M> button.
the [52] tab, select
2 Under
[LanguageK].
On the Main Dial, press the <YA>/
<ZO> button to select the [52] tab.
On the Main Dial, press the <Wj/i>/
<XL> button to select [LanguageK]
(the fifth from the top), then press <Q/
0>.
C
Y
P
O
language.
3 SetOnthethedesired
Main Dial, press the <Wj/i>/
<XL>/<YA>/<ZO> button to select
the language, then press <Q/0>.
X The interface language will change.
29
Attaching and Detaching a Lens
The camera can use EF-M, EF, and EF-S lenses. To attach an EF or EF-S
lens to the camera, Mount Adapter EF-EOS M is required.
Attaching a Lens
the caps.
1 Remove
Remove the rear lens cap and the body
cap by turning them as shown by the
arrows.
Index
the lens.
2 Attach
Align the lens’ index with the camera’s
index. Turn the lens as shown by the
arrow until it clicks in place.
3
Y
P
O
Remove the front lens cap.
C
Minimizing Dust
When changing lenses, do it quickly in a place with minimal dust.
When storing the camera without a lens attached, be sure to attach the body cap
to the camera.
Remove dust on the body cap before attaching it.
30
Attaching and Detaching a Lens
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by the
arrow.
Turn the lens until it stops, then detach it.
Attach the rear lens cap to the detached
lens.
About Zooming
To zoom, turn the zoom ring on the lens with
your fingers.
If you want to zoom, do it before
focusing. Turning the zoom ring after
achieving focus may throw off the focus
slightly.
C
Y
P
O
Do not look at the sun directly through any lens. Doing so may cause loss of
vision.
If the front part (focusing ring) of the lens rotates during autofocusing, do not
touch the rotating part.
The focus preset function of some lenses cannot be used with this camera.
Also, Power Zoom cannot be used even if you attach a lens featuring the
Power Zoom function, like the EF35-80mm f/4-5.6.
Lens Focal Length (Image Conversion Factor)
Since the image sensor size
Image sensor size (Approx.)
is smaller than the 35mm film
(22.3 x 14.9 mm / 0.88 x 0.59 in.)
format, it will look like the lens
focal length is increased by
35mm image size
approx. 1.6x.
(36 x 24 mm / 1.42 x 0.94 in.)
Example: An 18-55mm focal length would be equivalent to an approx. 29-88mm
focal length on a 35mm camera.
31
About the Lens Image Stabilizer
When you use the IS lens’ built-in Image Stabilizer, camera shake is
corrected to obtain a sharper shot.
* IS stands for Image Stabilizer.
* Instructions for EF and EF-S lenses are in the Camera Instruction Manual PDF file.
With an EF-M Lens (Operated with a Menu)
Set it with the menu*. By default, it is set to [Enable].
the menu screen.
1 Display
Press the <M> button.
the [A2] tab, select [Image
2 Under
Stabilizer].
Y
P
O
Press the <YA>/<ZO> button to
select the [A2] tab.
Press the <Wj/i>/<XL> button to
select [Image Stabilizer], then press
<Q/0>.
C
[Enable].
3 Select
Press the <Wj/i>/<XL> button to
select [Enable], then press <Q/0>.
Press the <M> button.
* This menu is displayed when an EF-M lens with IS function has been attached.
32
About the Lens Image Stabilizer
Using the Image Stabilizer when Shooting
the shutter button halfway.
1 Press
X The Image Stabilizer will operate.
the picture.
2 Take
When the picture looks steady on the
LCD monitor, press the shutter button
completely to take the picture.
C
Y
P
O
The Image Stabilizer cannot correct “subject blur”, when the subject moves at
the time of exposure.
For bulb exposures, set the IS to <2>. If <1> is set, Image Stabilizer
incorrect operation may occur.
The Image Stabilizer may not be effective for excessive shaking such as on a
rocking boat.
The Image Stabilizer works in all focus modes.
When the IS is set to <2>,
will appear on the screen.
When using a tripod, you can still shoot with the IS set to <1> with no
problem. However, to save battery power, setting the IS to <2> is
recommended.
The Image Stabilizer is effective even when the camera is mounted on a
monopod.
33
Basic Operation
Holding the Camera
To obtain sharp images, hold the camera still to minimize camera shake.
Horizontal shooting
1.
2.
3.
4.
5.
Vertical shooting
Y
P
O
Wrap your right hand around the camera grip firmly.
Hold the lens bottom with your left hand.
Rest your hand’s right index finger lightly on the shutter button.
Press your arms and elbows lightly against the front of your body.
To maintain a stable stance, place one foot slightly ahead of the other.
C
When shooting movies, be careful not to
cover the microphone.
34
Basic Operation
Shutter Button
The shutter button has two steps. You can press the shutter button halfway.
Then you can further press the shutter button completely.
Pressing halfway
The camera will focus and adjust the
exposure automatically (shutter speed and
aperture set automatically).
The exposure setting (shutter speed and
aperture) is displayed (8).
Pressing completely
This releases the shutter and takes the
picture.
Y
P
O
Preventing Camera Shake
Hand-held camera movement during the moment of exposure is called
camera shake. It can cause blurred pictures. To prevent camera shake, note
the following:
C
• Hold and steady the camera as shown on the preceding page.
• Press the shutter button halfway to autofocus, then slowly press the shutter
button completely.
If you press the shutter button completely without pressing it halfway first or if
you press the shutter button halfway and then press it completely
immediately, the camera will take a moment before it takes the picture.
Even during menu display, image playback, or image recording, you can
instantly go back to shooting-ready by pressing the shutter button halfway.
35
Quick Control
You can directly select and set the shooting functions displayed on the LCD
monitor. This is called the Quick Control screen.
There are two types of Quick Control screens: Q Quick Control and B
Quick Control.
Quick Control
1 QTap
[Q] on the screen or press <Q/
0>.
B Quick Control
Press and hold the <B> button until
the B Quick Control screen shown on
the next page appears.
X The Quick Control screen will appear.
function.
2 SetTapthethedesired
function to be set.
Y
P
O
X The selected function and Feature guide
will appear.
On the screen that appears, tap on the
function and set it.
X There are also functions with more
settings when you press the <B>
button.
To select and set the function, you can
press the Main Dial’s <YA>, <ZO>,
<Wj/i>, or <XL> button or turn the
Main Dial.
C
36
Quick Control
Scene Intelligent Auto
Q Quick Control
B Quick Control
B
Basic Zone modes
B
Creative Zone modes
B
C
Y
P
O
the picture.
3 Take
Press the shutter button completely to
take the picture.
37
Quick Control
Functions that can be set with Quick Control
AF method (p.66)
White balance
(9?)
AF operation (9?)
Image-recording
quality (9?)
Creative filters
(9?)
Picture Style (9?)
Auto Lighting Optimizer
(p.47)
Metering mode
(9?)
Aperture (9?)
Shutter speed (9?)
Highlight tone priority (9?)
Shooting mode (p.15, 16)
Exposure compensation/
AEB setting (9?)
White balance correction
(9?)
White balance
(9?)
AF method (p.66)
C
Y
P
O
AF operation (9?)
White balance bracketing (9?)
Drive mode (p.74)
38
ISO speed (9?)
Flash exposure
compensation
(9?)
Auto Lighting Optimizer
(p.47)
Image-recording quality
(9?)
Possible shots (p.26)
Picture Style (9?)
Metering mode (9?)
3 Menu Operations
You can set various settings with the menus such as the image-recording
quality, date/time, etc. Operate the menus with the <M> button, Main Dial,
and <Q/0> button.
<M> button
<Q/0>
LCD monitor
Main Dial
Menu Screen
Y
P
O
The menu applicable to the current shootings mode is provided.
Scene Intelligent Auto
C
Basic Zone modes
39
3 Menu Operations
Creative Zone modes
3 Playback
A Shooting
5 Set-up
9 My Menu
Tab
Menu items
Movie shooting
C
40
Y
P
O
Menu settings
3 Menu Operations
Menu Setting Procedure
the menu screen.
1 Display
Press the <M> button.
a tab.
2 Select
Press the <YA>/<ZO> button to
select a tab.
For example, the [A3] tab refers to the
screen displayed when the A
(Shooting) tab’s third icon [ ] from the
left is selected.
the desired item.
3 Select
Press the <Wj/i>/<XL> button to
select the item, then press <Q/0>.
Y
P
O
the setting.
4 Select
Press the <Wj/i>/<XL> button or
C
<YA>/<ZO> button to select the
setting. (There are settings you select
with the <Wj/i>/<XL> button and
settings you select with the <YA>/
<ZO> button.)
The current setting is indicated in blue.
the desired setting.
5 SetPress
<Q/0> to set it.
the setting.
6 ExitPress
the <M> button to return to the
shooting settings screen.
In step 2, you can also turn the <5> dial to select a menu tab.
In steps 2 to 5, you can also use the LCD monitor’s touch screen (p.45).
To cancel, press the <M> button.
41
3 Formatting the Card
If the card is new or was previously formatted by another camera or
computer, format the card with the camera.
When the card is formatted, all images and data in the card will be
erased. Even protected images will be erased, so make sure there is
nothing you need to keep. If necessary, transfer the images to a
computer, etc., before formatting the card.
[Format card].
1 Select
Under the [51] tab, select [Format card],
then press <Q/0>.
the card.
2 Format
Select [OK], then press <Q/0>.
Y
P
O
X When the formatting is completed, the
menu will reappear.
C
For low-level formatting, press the
<B> button to append [Low level
format] with a checkmark <X>, then
select [OK].
42
3 Formatting the Card
Execute [Format card] in the following cases:
The card is new.
The card was formatted by a different camera or a computer.
The card is full with images or data.
A card error is displayed (9?).
What is low-level formatting?
Perform low-level formatting if the card’s recording or reading speed seems slow
or if you want to totally erase all data in the card.
Since low-level formatting will format all recordable sectors in the card, the
formatting will take slightly longer than normal formatting.
You can stop the low-level formatting by selecting [Cancel]. Even in this case,
normal formatting will be completed and you can use the card as usual.
C
Y
P
O
When the card is formatted or data is erased, only the file management
information is changed. The actual data is not completely erased. Be aware of
this when selling or discarding the card. When discarding the card, execute
low-level formatting or destroy the card physically to prevent the personal
data from being leaked.
Before using a new Eye-Fi card, the software in the card must be
installed in your computer. Then format the card with the camera.
The card capacity displayed on the card format screen may be smaller than
the capacity indicated on the card.
This device incorporates exFAT technology licensed from Microsoft.
43
Switching the LCD Monitor Display
B Quick Control
Each time you press the <B> button,
the LCD monitor switches between the
Live View screen and B Quick Control
(p.36).
Menu
Captured Image
Appears when you press the
<M> button. Press the button
again to return to the Live View
screen.
C
Y
P
O
Appears when you press the
<x> button. Press the button
again to return to the Live View
screen.
Even when the menu screen or captured image is displayed, pressing the
shutter button will enable you to shoot immediately.
44
d Using the Touch Screen and Main Dial
The LCD monitor is a touch-sensitive panel that you can operate with your
fingers.
Also, on the camera back, you can turn the Main Dial to make a selection and
press the dial’s top, bottom, left, right, or center.
You can operate this camera by touching the LCD monitor or using the Main
Dial (turning it or pressing the top, bottom, left, or right) to select an item, then
pressing the Main Dial’s center button to set it.
Touch Screen
Tap
Quick Control (Sample display)
C
Use your finger to tap (touch and let go)
the LCD monitor.
By tapping, you can select menus, icons,
etc., displayed on the LCD monitor.
Icons that you can tap are displayed in a
frame (except for the menu screen).
By tapping [2], you can return to the
previous screen.
Y
P
O
Operations possible by tapping the screen
Setting menu functions after pressing the <M> button
Quick Control
Setting a function after you press the <Wj/i>, <XL>, <YA>, or
<ZO> button
Touch shutter
Playback operations
45
d Using the Touch Screen and Main Dial
Drag
Menu screen (Sample display)
Slide your finger while touching the LCD
monitor.
Scale display (Sample display)
Y
P
O
Operations possible by dragging your finger on the screen
Selecting a menu tab or item after pressing the <M> button
Setting a scale control
Quick Control
Playback operations (swipe)
C
Main Dial
To select a function, you can turn the dial or
press the top, bottom, left, and right edges.
By pressing <Q/0> at the center, you can
set the selected function.
46
Through the lens of a camera, you may
discover things you’ve never noticed before.
Try wearing casual clothing so you can rest
on one knee or crouch if necessary. Walk
around with a camera in hand and observe
your surroundings so you can discover new
subjects you may find interesting.
Scene Intelligent Auto +
Basic Zone Modes
Y
P
O
This chapter explains how to shoot with the Scene Intelligent
Auto and Basic Zone modes.
Basic Zone modes enable you to just point and shoot by pressing
the shutter button. However, you can also blur the background
(p.55), apply image effects (9?), and suit the lighting or
scene (9?).
C
B
About the Auto Lighting Optimizer
In Basic Zone modes, the Auto Lighting Optimizer (9?) will
adjust the image automatically to obtain the optimum brightness and
contrast. It is also enabled by default in Creative Zone modes.
47
A Fully Automatic Shooting (Scene Intelligent Auto)
<A> is a fully automatic mode. The camera analyzes the scene and
sets the optimum settings automatically.
With Scene Intelligent Auto, the camera always focuses automatically. You
can select one of three AF methods with the menu or Quick Control screen.
When you select [u (face)+Tracking], the person’s face will be detected and
focused (p.66). [FlexiZone - Multi] makes it easier to focus a moving subject
(p.68). [FlexiZone - Single] uses only one AF point to focus the desired
target subject (p.69).
Using [u (face)+Tracking] is explained below.
1 Set the Mode Dial to <A>.
AF point
the AF point.
2 Check
When a face is detected, the <p> AF
Y
P
O
point will appear over the face to be
focused.
You can also tap the screen to select the
face or subject. If the subject is not a
face, < > will be displayed.
If no faces are detected or if you tap the
screen but do not select any face or
subject, the camera will switch to
[FlexiZone - Multi] for automatic
selection (p.68).
C
48
A Fully Automatic Shooting (Scene Intelligent Auto)
the subject.
3 Focus
Press the shutter button halfway to focus.
X When focus is achieved, the AF point will
turn green and the beeper will sound.
the picture.
4 Take
Press the shutter button completely.
Y
P
O
X The captured image will be displayed for
approx. 2 sec. on the LCD monitor.
C
The <A> mode makes the colors look more impressive in nature, outdoor,
and sunset scenes. If the desired color tone is not obtained, use a Creative
Zone mode and select a Picture Style other than <D> and shoot
(9?).
The image’s field of view is approx. 99% (when the image-recording quality is
set to JPEG 73).
During continuous shooting, the exposure set for the first shot will also be
applied to subsequent shots.
If you do not operate the camera and the time set with [LCD auto off] under
[52: Power saving] elapses, the LCD monitor will turn off automatically. After
the LCD monitor turns off and the time set with [Camera auto off] elapses,
the power will turn off automatically.
With a stereo AV cable or HDMI cable (both sold separately), you can display
the image being shot on a TV set (9?).
49
A Fully Automatic Shooting (Scene Intelligent Auto)
FAQ
The AF point does not turn green and focus is not achieved.
Try again, aiming the AF point at an area with a good bright/dark contrast,
then press the shutter button halfway. Also, focus might not be achieved if
you are too close to the subject. Move away from the subject and shoot.
Multiple AF points appear in green.
Focus has been achieved at all the green AF points. When the AF point
covering the desired subject turns green, take the picture.
Pressing the shutter button halfway does not focus the subject.
When an EF or EF-S lens is used, if the focus mode switch on the lens is
set to <MF> (manual focus), manual focusing will be in effect. Set the
focus mode switch to <AF> (autofocus).
With Speedlite 90EX Attached (9?)
Y
P
O
(When you use flash, there is a slight time lag after you press the shutter button
completely before the picture is taken.)
The flash fired even though it was daylight.
For a backlit subject, the flash may fire to help lighten the subject’s dark
areas. If you do not want the flash to fire, switch the Speedlite’s power to
<2>.
C
The flash fired and the picture came out extremely bright.
Move farther from the subject and shoot. When shooting flash
photography, if the subject is too close to the camera, the picture may
come out extremely bright (overexposure).
The flash fired, but the photo came out dark.
You were too far away from the subject. See “Effective Flash Range”
(9?) and shoot.
When flash was used, the bottom part of the picture came out
unnaturally dark.
The subject was too close to the camera, and a shadow was created by
the lens barrel. The subject should be at least 1 meter/3.3 feet away from
the camera. If a hood is attached to the lens, remove it before taking the
flash picture.
50
A Full Auto Techniques (Scene Intelligent Auto)
With a digital camera, you should use a card with ample capacity. If you
cannot decide on the composition or which mode to use, you should shoot
freely in various compositions and modes. Even if the picture is slightly
blurred, it can still convey something. You can always erase failed or
unwanted images, so be sure to try many different shots.
Recomposing the Shot
Y
P
O
Depending on the scene, instead of having the subject at the center, you
should put the subject toward the right or left and include some background.
This gives the picture more balance and depth.
While you press the shutter button halfway to focus a still subject, the focus
will be locked at the subject’s distance. Then aim the camera to the right or
left and press the shutter button completely. This is called “focus lock”. Focus
lock is also possible in other Basic Zone modes (except <5> Sports).
C
51
A Full Auto Techniques (Scene Intelligent Auto)
Scene Icons
When you shoot in the <A> mode, an icon representing the scene detected
by the camera will be displayed.
Subject
Portrait*1
Non-Portrait
Nature and
Movement Outdoor
Movement
Scene
Background
Close*2
Background
Color
Bright
Gray
Backlit
Blue sky
included
Light blue
Backlit
*3
Sunset
Spotlight
Dark
With tripod
*4*5
*3
C
Y
P
O
*4*5
*3
Orange
Dark blue
*3
*1 : Displayed only when the AF method is set to [u+Tracking]. If another AF method
is set, the “Non-Portrait” icon will be displayed even if a person is detected.
*2 : Displayed when the attached lens has distance information. With an Extension
Tube or Closeup Lens, the icon displayed may not match the actual scene.
*3 : The icon suiting the scene detected will be displayed.
*4 : Displayed when you use a tripod for a low-light or night scene.
*5 : Displayed with any of the lenses below:
• EF24mm f/2.8 IS USM
• EF28mm f/2.8 IS USM
• EF300mm f/2.8L IS II USM
• EF400mm f/2.8L IS II USM
• EF500mm f/4L IS II USM
• EF600mm f/4L IS II USM
• EF-S18-55mm f/3.5-5.6 IS II • EF-S18-135mm f/3.5-5.6 IS STM
• EF-S55-250mm f/4-5.6 IS II
• IS lenses marketed in 2012 or later.
* For certain scenes, the icon displayed may not match the actual scene.
52
Select a Shooting Mode
the shooting mode icon on the
1 Tap
screen’s upper left corner.
The shooting mode selection screen will
appear.
the screen to select a shooting
2 Tap
mode.
You can also select the shooting mode on
the B Quick Control screen.
With z
Y
P
O
Tap the arrow on either side of the screen to go to another page.
The shooting mode screen has three pages, the Creative Zone screen has
one page, and the Basic Zone screen has two pages.
C
Creative Zone modes
You can select the following: a: Manual, f: Aperture-priority AE, s:
Shutter-priority AE, and d: Program AE.
Basic Zone modes
C: Creative Auto, 2: Portrait, 3: Landscape, 4: Close-up, 5: Sports,
6: Night Portrait, F: Handheld Night Scene, G: HDR Backlight Control
With k
k: Autoexposure, M: Manual exposure
53
C Creative Auto Shooting
In the <C> mode, you can easily blur the background, change the drive
mode or control the firing of an attached Speedlite flash. You can also choose
the ambience you want to convey in your images. The default settings are the
same as the <A> mode.
* CA stands for Creative Auto.
Turn the Mode Dial to <z>, then
1 select
<C> on the screen.
the Quick Control screen.
2 Display
With the Q Quick Control screen, you
can check the effect while setting the
function (except for [Backgnd:Blurred
<-> Sharp]).
Y
P
O
the desired function.
3 SetSelect
the function, then tap [2].
X The selected function and Feature guide
(9?) will appear.
For setting procedure and details on each
function, see the next page.
C
the picture.
4 Take
Press the shutter button.
(1)
(1)
(4)
(2)
(3)
Battery check
Image-recording quality
54
(2)
(4)
Possible shots
C Creative Auto Shooting
(1) Ambience-based shots (Q Quick Control / B Quick Control)
You can choose the ambience you want to convey in your images.
(2) Blurring/Sharpening the background (Q Quick Control / B Quick Control)
If you move the index mark toward the left, the background will look more
blurred. If you move it toward the right, the background will look more in
focus. If you want to blur the background, see “Shooting Portraits” on
page 56.
Depending on the lens and shooting conditions, the background may not
look so blurred. If flash is used, this setting will not be applied.
(3) Drive mode (B Quick Control)
<u> Single shooting:
Shoot one image at a time.
<i> Continuous shooting:
While you hold down the shutter button completely, shots will
be taken continuously. You can shoot up to approx. 4.3 shots
per sec.
<Q> Self-timer: 10sec./remote:
The picture is taken 10 seconds after you press the shutter
button. A remote controller can also be used.
<l> Self-timer: 2sec.:
The picture is taken 2 seconds after you press the shutter
button.
<q> Self-timer: Continuous:
Tap [W]/[X] to set the number of multiple shots (2 to 10) to be
taken with the self-timer. 10 seconds after you press the
shutter button, the set number of multiple shots will be taken.
C
Y
P
O
(4) Attached Speedlite 90EX flash firing (Q Quick Control / B Quick Control)
<a> Auto flash : The flash fires automatically when necessary.
<I> Flash on : The flash fires at all times.
<b> Flash off : The flash is disabled.
* When a flash other than the Speedlite 90EX is attached, the flash mode will be
set to Flash on.
If you change the shooting mode or set the power to <2>, the functions you
have set on this screen will revert to their default setting. However, the AF
method, image-recording quality, self-timer and remote control settings will be
retained. With Creative Zone modes that allow the use of creative filters, the
creative filter settings will be retained as well.
55
2 Shooting Portraits (Portrait)
This mode blurs the background to make the person stand out better. It also
makes skin tones and the hair look softer.
Shooting Tips
Y
P
O
The further the distance between the subject and background, the
better.
The further the distance between the subject and background, the more
blurred the background will look. The subject will also stand out better in
front of a plain, dark background.
C
Use a telephoto lens.
If you have a zoom lens, use the telephoto end to fill the frame with the
subject from the waist up. Move in closer if necessary.
Focus the face.
Check that the AF point covering the face turns green.
The default setting is <i> (continuous shooting). If you hold down the
shutter button, you can shoot continuously to obtain different poses and facial
expressions (max. approx. 4.3 shots/sec.).
Using the Speedlite 90EX or similar flash in Portrait mode is recommended.
56
3 Shooting Landscapes (Landscape)
Suited for wide scenes when you want everything to be in focus from near to
far. For vivid blues and greens, and very sharp and crisp images.
Shooting Tips
Y
P
O
With a zoom lens, use the wide-angle end.
When using the wide-angle end of a zoom lens, objects near and far will
be in focus better than at the telephoto end. It also adds breadth to
landscapes.
C
Shooting night scenes.
Since the flash will be disabled, this mode <3> is also good for night
scenes. Use a tripod to prevent camera shake.
57
4 Shooting Close-ups (Close-up)
For shooting flowers and small objects up close. To make small things appear
much larger, use a macro lens (sold separately).
Shooting Tips
Y
P
O
Use a simple background.
When the background has no other flowers, leaves, etc., the close-up
subject will stand out more.
C
Move as close as possible to the subject.
Check the lens for its minimum focusing distance. Some lenses have
indications such as <40.25m/0.8ft>. (This example indicates a minimum
focusing distance of 25 cm/0.8 ft.) The lens minimum focusing distance is
measured from the <V> (focal plane) mark (on the left of the hot shoe) to
the subject. If you get too close to the subject, focus cannot be achieved.
With a zoom lens, use the telephoto end.
If you have a zoom lens, using the telephoto end will make the subject look
larger.
58
5 Shooting Moving Subjects (Sports)
Use this mode to photograph a moving subject.
Shooting Tips
Y
P
O
Shoot continuously.
When you press the shutter button halfway, the camera will focus and the
AF point will be fixed.
While the camera focuses, the beeper will sound. If focus cannot be
achieved, the AF point will turn orange.
When the right moment comes, press the shutter button completely to take
the picture. If you hold down the shutter button completely, the camera will
keep focusing and shooting continuously so you can capture the changing
movement.
The continuous shooting speed (maximum number of frames per
second) depends on the lens used.
• EF-M18-55mm f/3.5-5.6 IS STM: approx. 1.7 fps
• EF-M22mm f/2 STM: approx. 1.2 fps
• EF and EF-S lenses: approx. 4.3 fps
C
Under low light, when camera shake is prone to occur, the LCD monitor’s shutter
speed display on the bottom left will blink. Hold the camera steady and shoot.
59
6 Shooting Night Portraits (Night Portrait) (With a Tripod)
Attach Speedlite 90EX and shoot portraits with a beautiful and bright night
scene in the background.
Shooting Tips
Y
P
O
Use a wide-angle lens and a tripod.
When using a zoom lens, use the wide-angle end to obtain a wide night
view. Also, use a tripod to prevent camera shake.
C
Take portraits without flash.
When the Speedlite’s power is <1>, the Speedlite will fire a flash
automatically under low-light conditions to obtain a nice portrait.
You should then play back the image to check the image brightness. If the
subject looks dark, move nearer and shoot again.
The effective range of the flash is explained in “Effective Flash Range”
(9?).
When shooting a night scene without a human subject, turn off the Speedlite.
Also shoot in another shooting mode.
Since camera shake is prone to occur with night shots, shooting also with
<A> and <F> is recommended.
Tell the subject to keep still even after the flash fires.
If you use a flash with the self-timer, the self-timer/AF-assist beam lamp will
light up briefly after the picture is taken.
When shooting night scenes or other scenes where multiple point-like light
sources appear on the screen, the camera may not be able to focus
automatically. In such cases, setting the [AF method] to [FlexiZone - Single] is
recommended. If the camera still cannot focus automatically, set the focus mode
to [MF] and focus manually.
60
F Shooting Night Scenes Handheld (Handheld Night Scene)
For shooting night scenes while handholding the camera. When you take a
picture, four shots are taken continuously to produce a single, bright photo
that reduces camera shake.
Shooting Tips
C
Y
P
O
Hold the camera firmly.
While shooting, hold the camera firmly and steadily. If the continuous shots
are very misaligned due to camera shake, etc., they may not align properly
in the final image.
With Speedlite 90EX Attached
If you will only shoot a night scene, turn off the Speedlite.
If you are shooting only the night scene, turn off the flash.
If you are also photographing a person, turn on the Speedlite.
To take a nice portrait, the first shot will use flash. Tell the person not to
move until all four continuous shots are taken. The effective range of the
flash for human subjects is explained in “Effective Flash Range”
(9?).
61
G Shooting Backlit Scenes (HDR Backlight Control)
When shooting a scene having both bright and dark areas. When you take a
picture, three continuous shots will be taken at different exposures. The loss
of detail in highlights and shadows will be reduced in the final image.
Shooting Tips
Y
P
O
Hold the camera firmly.
While shooting, hold the camera firmly and steadily. If the continuous shots
are very misaligned due to camera shake, etc., they may not align properly
in the final image.
C
62
<F> (Handheld Night Scene)
When shooting night scenes and other scenes with multiple point-like light
sources, the camera may not be able to focus automatically. In such cases,
set the focus mode to [MF] and focus manually.
When shooting flash photography, if the flash fires and the subject’s
background is close enough to be illuminated by the flash or the night scene
has only few lights, the shots may not align correctly. This can result in a
blurry photo.
When shooting flash photography, if the subject is too close to the camera,
the picture may come out extremely bright (overexposure).
When using a Speedlite with automatic flash coverage setting, the zoom
position will be fixed to the wide end, regardless of the lens’ zoom position.
When using a Speedlite with manual flash coverage switch, shoot with the
flash head retracted to the wide (normal) position.
<G> (HDR Backlight Control)
The AF-assist beam will be emitted.
Flash cannot be used.
Note that the image may not be rendered with a smooth gradation and may
look irregular or have significant noise.
HDR Backlight Control may not be effective for excessively backlit scenes or
extremely high-contrast scenes.
When shooting subjects that are sufficiently bright, for example for normally lit
scenes, the image may look unnatural because of the applied HDR effect.
C
Y
P
O
<F> (Handheld Night Scene), <G> (HDR Backlight Control)
Compared with other shooting modes, the shooting area will be smaller.
1+73 or 1 cannot be selected. With other shooting modes, if 1+73
or 1 is set, the picture will be recorded in 73.
If you shoot a moving subject, ghost-like images of the subject may result.
The image alignment may not function properly with repetitive patterns
(lattice, stripes, etc.), flat or single-tone images, or greatly misaligned shots
caused by camera shake.
Compared to normal shooting, recording the image to the card will take
longer. During the processing of the images, [BUSY] will be displayed and
you cannot take another picture until the processing is completed.
You cannot use Creative filters when shooting.
Final image simulation is not available.
If the mode dial is set to <F> or <G>, direct printing is not possible. Select
other mode and perform direct printing.
63
x Image Playback
The easiest way to play back images is explained below. For more details on
the playback procedure, see page 81.
back the image.
1 Play
Press the <x> button.
X The last captured image or last image
viewed will appear.
When the power is <2> and you hold
down the <x> button for 2 seconds or
longer, the power will turn <1> and the
playback screen will appear.
an image.
2 Select
When you press the <YA> button, the
last image captured will be displayed first.
When you press the <ZO> button, the
first image captured will be displayed first.
Each time you press the <B> button,
the information display will change.
C
Y
P
O
No information
With basic information
Histogram display
Shooting information
the image playback.
3 ExitPress
the <x> button to exit the image
playback and return to the Live View
screen.
64
Changing the Focusing Method
Scene Intelligent Auto
Basic Zone modes,
Creative Zone modes
AF, MF, AF+MF
Focus mode*
Menu
(AF only)
AF method
Menu,
Quick Control
u+Tracking, FlexiZone - Multi,
FlexiZone - Single
Continuous AF
Menu
Enable / Disable
* “Focus mode” will be displayed when an EF-M lens has been attached.
* Instructions for EF and EF-S lenses are in the Camera Instruction Manual PDF file.
the AF method.
1 Select
Under the [A2] tab, select [Focus
mode], [AF method], or [Continuous
AF].
Select the item to be set, then press <Q/
0>.
You can also select the [AF method] on
the Quick Control screen.
C
With an EF-M lens
(operated with a menu):
Y
P
O
the lens focus mode to [AF].
2 SetUnder
the [A2] tab, select [Focus
mode].
Select [AF].
X For [Focus mode], if you select
[AF+MF], you can hold the shutter button
pressed halfway after the AF operation
and focus manually (MF) with the
focusing ring.
65
Changing the Focusing Method
u(face)+Tracking: c
Human faces are detected and focused. If a face moves, the AF point <p>
also moves to track the face.
the AF point.
1 Check
When a face is detected, the <p> AF
point will appear over the face to be
focused.
You can also tap the screen to select the
face or subject. If the subject is not a
face, < > will be displayed.
If no faces are detected or if you tap the
screen but do not select any face or
subject, the camera will switch to
[FlexiZone - Multi] for automatic
selection (p.68).
Y
P
O
the subject.
2 Focus
Press the shutter button halfway to focus.
C
X When focus is achieved, the AF point will
turn green and the beeper will sound. (If
[AF operation] has been set to [Servo
AF], the AF point remains white and the
beeper will not sound.)
X If focus is not achieved, the AF point will
turn orange.
the picture.
3 Take
Press the shutter button completely
(p.49).
66
Changing the Focusing Method
If the focus is far off, face detection will not be possible. If you set
[Continuous AF] to [Enable], you can prevent the image from becoming
greatly out of focus.
An object other than a human face may be detected as a face.
Face detection will not work if the face is very small or large in the picture, too
bright or too dark, or partially hidden.
The <p> may cover only part of the face.
When you press the <XL> button, the < > AF point will appear at the
center of the screen. Drag it to move the AF point. Press the <XL> button
again, and the AF point will move to the detected subject.
Since AF is not possible with a face detected near the edge of the picture, the
<p> will be grayed out. If you press the shutter button halfway, the subject
will be focused in FlexiZone - Multi method with automatic selection.
C
Y
P
O
When [Continuous AF] (p.72) or [Movie servo AF] (9?) is set to
[Enable]
When [u+Tracking] or [FlexiZone - Multi] with automatic selection is set, the
AF point will be momentarily displayed in the image center if the subject is not
detected. If you press the shutter button halfway, the camera will focus in
FlexiZone - Multi method with automatic selection.
67
Changing the Focusing Method
FlexiZone - Multi: o
Up to 31 AF points (automatically selected) covering a wide area can be used
to focus. This wide area can also be divided into 9 zones for focusing (zone
selection).
the AF zone. N
1 Select
Pressing the <XL> button will toggle
between automatic selection and zone
selection. In Basic Zone modes,
automatic selection will be set.
To select a zone, tap it on the screen. To
return to the center zone, press the
<XL> button.
During zone selection, tap the [
] icon
on the screen to switch to automatic
selection.
Y
P
O
the subject.
2 Focus
Aim the AF point over the subject and
press the shutter button halfway.
X When focus is achieved, the AF point
turns green and the beeper sounds. (If
[AF operation] has been set to [Servo
AF], the AF point remains white and the
beeper will not sound.)
X If focus is not achieved, the AF point will
turn orange.
C
the picture.
3 Take
Press the shutter button completely
(p.49).
68
Changing the Focusing Method
When the camera does not focus the desired target subject with automatic AF
point selection, switch the AF method to zone selection or [FlexiZone Single], and refocus.
Depending on the aspect ratio setting, the number of AF points will differ. At
[3:2], there will be 31 AF points. At [1:1] and [4:3], there will be 25 AF points.
And at [16:9], 21 AF points. Also, at [16:9], there will be only three zones.
For movie shooting, there will be 21 AF points (or 25 AF points if [640x480] is
set) and three zones (or 9 zones if [640x480] is set).
FlexiZone - Single: d
Since only one AF point is used to focus, you can focus the target subject.
the AF point.
1 Move
Tap the screen where you want to focus
to move the AF point. (It cannot go to the
edges of the picture.) To return the AF
point to the center, press the <XL>
button.
AF point
C
Y
P
O
the subject.
2 Focus
Aim the AF point over the subject and
press the shutter button halfway.
X When focus is achieved, the AF point
turns green and the beeper sounds. (If
[AF operation] has been set to [Servo
AF], the AF point remains white and the
beeper will not sound.)
X If focus is not achieved, the AF point will
change to orange.
the picture.
3 Take
Press the shutter button completely
(p.49).
69
Changing the Focusing Method
Notes About [u+Tracking], [FlexiZone - Multi], and
[FlexiZone - Single]
AF Operation
Even when focus has been achieved, pressing the shutter button halfway
will focus again.
The image brightness may change during and after the AF operation.
If the light source changes during autofocusing, the screen may flicker and
focusing may be difficult. If this happens, autofocus under the light to be
used for shooting.
When [FlexiZone - Multi] is set and you tap on [ ] on the screen, the
center of the zone (or screen center if automatic selection is set) will be
magnified. If you press the shutter button halfway, the display will return to
normal and the camera will focus.
When [FlexiZone - Single] is set and you tap on [ ] on the screen, the
image at the AF point will be magnified. When you press the shutter button
halfway, the camera will focus while the magnified image is displayed
(however, if [AF operation] is set to [Servo AF], the display will return to
normal and then the camera will focus). This is effective when the camera
is attached to a tripod and you need to attain very precise focus. If focusing
is difficult in the magnified view, return to the normal display and use AF.
Note that the AF speed may differ between the normal and magnified views.
If you magnify the view after focusing with [FlexiZone - Multi] or
[FlexiZone - Single] in the normal view, it may not look focused.
If [u+Tracking] is set, magnified view is not possible.
C
Y
P
O
About continuous shooting when [AF operation] is set to [Servo AF]:
When [u+Tracking] or [FlexiZone - Multi] is set, when you press the
shutter button halfway, the camera will focus and the AF point will be fixed.
When an EF-M lens is used, Servo AF will be used to focus; if an EF or
EF-S lens is used, focus lock will be used instead.
If you shoot a peripheral subject and it is slightly out of focus, aim the center AF
point or zone over the subject to focus, focus again and then take the picture.
When [FlexiZone - Multi] is set and AF is used to focus, depending on the
shooting conditions, it may take longer to focus the subject.
In magnified view, focusing using AF may be difficult due to the magnified
effect of camera shake. Using a tripod is recommended.
70
Changing the Focusing Method
Shooting conditions that make focusing difficult
Low-contrast subjects such as the blue sky, solid-color flat surfaces or
when highlights or shadow details are lost.
Extremely bright or dark subjects.
Stripes and other patterns where there is contrast only in the horizontal
direction.
Subjects with repetitive patterns (skyscraper windows, computer
keyboards, etc.).
Fine lines and subject outlines.
Under a light source whose brightness, color, or pattern keeps changing.
Night scenes or points of light.
When the image flickers under fluorescent or LED light sources.
Extremely small subjects.
Subjects at the edge of the picture.
Subjects strongly reflecting light.
The AF point covers both a near and faraway subject (such as an animal in
a cage).
Subjects that keep moving within the AF point and cannot keep still due to
camera shake or subject blur.
Autofocusing while the subject is very far out of focus.
Soft focus effect is applied with a soft focus lens.
A special effect filter is used.
C
Y
P
O
In the above cases, if the camera cannot focus automatically, focus manually.
With some EF lenses (Mount Adapter EF-EOS M required), it may take longer
to achieve focus or correct focus may not be achieved. For the latest
information, visit your local Canon Web site.
71
Changing the Focusing Method
Using Continuous AF
The default setting is [Enable].
Since the focus is constantly close to the
subject, when you press the shutter button,
the camera quickly focuses the subject. If
[Enable] is set, the lens will operate
frequently and consume more battery
power. This will reduce the number of
possible shots (battery life).
When an EF or EF-S lens is used, during
Continuous AF, turn off the power before
setting the lens’s focus mode switch to
<MF>.
Y
P
O
Using AF+MF Mode (Full-time manual focusing)
Set the Focus mode to [AF+MF].
After focus is achieved using AF, you can adjust the focus manually as
desired using the focusing ring while holding the shutter button pressed
halfway.
However, in <5> mode (p.59) or if [AF operation] is set to [Servo AF]
(9?), priority is given to Servo AF. In such cases, even if you set the
focus mode to [AF+MF], you will not be able to focus manually.
C
72
x Shooting with the Touch Shutter
You can focus and take the picture automatically just by tapping the LCD
monitor screen. This works in all shooting modes.
the touch shutter.
1 Enable
Tap [y] on the screen’s bottom left.
Each time you tap the icon, it will toggle
between [y] and [x].
When [x] is set, you can tap to focus
and shoot.
When [y] is set, you can tap to select
the point to focus. Then, press the shutter
button completely to shoot.
to shoot.
2 TapTapthethescreen
face or subject on the screen.
X At the point you tap, the camera will focus
in the AF method that was set (p.66-69).
When [FlexiZone - Multi] is set, it will
switch to [FlexiZone - Single].
X When focus is achieved, the picture is
taken automatically.
The picture is not taken if focus is not
achieved. Tap the face or subject on the
screen again.
C
Y
P
O
Even if the drive mode is set to <i> (continuous shooting), single shooting
will take effect.
The touch shutter does not function when the view is magnified.
When [1: AE lock/AF] or [3: AE/AF, no AE lock] is set to [5: Shutter/AE lock
button] under [54: Custom Functions (C.Fn)], autofocusing does not take
effect.
You can also enable the touch shutter by setting [Touch Shutter: Enable]
under the [A3] tab.
To take a bulb exposure, tap the screen twice. The first tap on the screen will
start the bulb exposure. Tapping it again will stop the exposure. Be careful not
to shake the camera when tapping the screen.
Even if [AF operation] is set to [Servo AF], One-Shot AF will take effect when
touch shutter is used.
73
j Using the Self-timer
the <Wj/i> button.
1 Press
You can also select the shooting mode on
the B Quick Control screen.
self-timer.
2 TapBythe
tapping [2], you can return to the
previous screen.
Q: 10-sec. self-timer
The remote controller can also be
used (9?).
l: 2-sec. self-timer
q: 10-sec. self-timer plus continuous
shots
Tap [W]/[X] to set the number of
multiple shots (2 to 10) to be taken
with the self-timer.
C
Y
P
O
the picture.
3 Take
Focus the subject, then press the shutter
button completely.
X You can check the self-timer operation
with the self-timer/AF-assist beam,
beeper, and countdown display (in
seconds) on the LCD monitor.
X Two seconds before the picture is taken,
the self-timer/AF-assist beam will light up
and the beeper will sound faster.
To cancel the self-timer shooting:
Press the <Wj/i> button or set the power to <2>.
(To cancel the self-timer setting, press the <Wj/i> button and tap [u] or
[i].)
74
Movies shot with interchangeable-lens
digital cameras have a unique look,
different from video shot with camcorders.
You can manipulate how light enters the
camera, shoot wide angle, and enjoy many
other video features.
Shooting Movies
Y
P
O
Set the Mode Dial to <k> to shoot
movies. The movie recording format will
be MOV.
For more movie-shooting details,
functions, and cautions, see the
Camera Instruction Manual PDF file.
C
Cards that can record movies
When shooting movies, use a large-capacity SD card rated SD
Speed Class 6 “
” or higher.
If the card’s writing speed is slow, the movie may not be recorded
properly. Also, if the card’s reading speed is slow, movies recorded
on the card may not play properly.
To check the card’s read/write speed, refer to the card manufacturer’s
Web site.
About Full HD 1080
Full HD 1080 indicates compatibility with HighDefinition featuring 1080 vertical pixels (scanning
lines).
75
k Shooting Movies
Connecting the camera to a TV set is recommended to play back the movies
shot (9?).
* For details on manual-exposure movie shooting (M), see the Camera Instruction
Manual PDF file.
Autoexposure Shooting
When you select the Movie shooting mode [k], autoexposure is set to adjust
the brightness automatically.
1 Set the Mode Dial to <k>.
[k] (Movie auto exposure)
2 Select
for the shooting mode.
Y
P
O
the subject.
3 Focus
Before shooting a movie, focus with AF
or manual focus (p.65-69).
By default, [Movie Servo AF: Enable]
(9?) is set for continuous
focusing.
When [Movie Servo AF] is set to
[Enable], you can tap [
] on the
screen’s lower left to stop/start the
focusing. If you stop the focusing, the AF
point will turn gray.
C
Recording movie
Microphone
76
the movie.
4 Shoot
Press the <o> (Movie start/stop) button
to start shooting a movie. To stop
shooting the movie, press the <o>
(Movie start/stop) button again.
X While the movie is being shot, the “o”
mark will be displayed on the upper right
of the screen.
While shooting a movie, be careful not to
cover the microphone with your finger.
k Shooting Movies
With certain lenses, focus cannot be achieved with AF. Focus manually instead
(9?).
If [Movie Servo AF: Disable] is set, you can focus by pressing the shutter
button halfway.
The ISO speed (100-6400), shutter speed, and aperture are set
automatically.
Press the <YA> button to lock the current exposure setting (AE lock)
(9?). To release the AE lock, press the <YA> button again.
In movie shooting mode, you can tap [A] to lock the exposure/release the
AE lock.
You can then set the exposure compensation by pressing the <ZO> button
to display the range that can be set [
] and then turning the <5> dial.
Pressing the shutter button halfway displays the shutter speed, aperture, and
ISO speed on the screen’s bottom. This is the exposure setting for taking a
still photo (p.78). The exposure setting for movie shooting is not displayed.
Note that the exposure setting for movie shooting may differ from that for still
photo shooting.
C
Y
P
O
77
k Shooting Movies
Movie Shooting Screen
Each time you press the <B> button, the information display will
change.
AF method
• c: u+Tracking
• o : FlexiZone - Multi
• d : FlexiZone - Single
Possible shots (still photos)
Movie shooting remaining time/Elapsed time
Movie shooting mode
L: Autoexposure
K: Manual exposure
Battery check
AF point
Quick Control
White balance
Image-recording
quality
(still photos)
Movie recording size
Video snapshot
Drive mode
Movie Servo AF:
Enable
Shutter speed
C
Picture Style
Y
P
O
Aperture
Video snapshot shooting time
Exposure compensation amount
Auto Lighting
Optimizer
AE lock
Exposure mode
Recording level:
Manual
ISO speed (Auto)
Attenuator
Wind filter
* When an Eye-Fi card is inserted in the camera, the Eye-Fi transmission status
(9?) will be displayed.
When movie shooting starts, the movie shooting remaining time will change to
the elapsed time.
78
k Shooting Movies
During movie shooting, note the following:
If <Q> is set and the ISO speed or aperture changes during movie
shooting, the white balance may also change.
If you shoot a movie under fluorescent or LED lighting, the movie may flicker.
Zooming the lens during movie shooting is not recommended. Zooming the
lens can cause changes in the exposure regardless of whether the lens’
maximum aperture changes or not. Exposure changes may be recorded as a
result.
Movie-related settings are under the [Z1] tab (9?).
A movie file is recorded each time you shoot a movie. If the file size exceeds
4 GB, a new file will be automatically created.
The movie image’s field of view is approx. 100% (with movie recording size
set to [A]).
The sound will be recorded in stereo by the camera’s built-in microphone
(p.76).
Most commercially-available external stereo microphones with a 3.5 mm
diameter miniplug can be connected to the camera. If an external microphone
has been connected to the camera’s external microphone IN terminal (p.12),
it will be given priority the built-in microphone.
You can use the Remote Controller RC-6 (sold separately, 9?) to start
and stop the movie shooting if the drive mode is <Q>. Set the shooting
timing switch to <2> (2-sec. delay), then press the transmit button. If the
switch is set to <o> (immediate shooting), still photo shooting will take
effect.
With a fully-charged Battery Pack LP-E12, the total movie shooting time will
be as follows: approx. 1 hr. 30 min. at room temperature (23°C/73°F), and
approx. 1 hr. 20 min. at low temperature (0°C/32°F).
If the Speedlite 90EX is attached, set the Speedlite’s power to <2>.
C
Y
P
O
79
C
Y
P
O
Viewing images on a large TV screen is a
very different experience from seeing them
on a computer screen.
Seeing photos on a large screen is another
way to enjoy them.
Image Playback
Y
P
O
This chapter explains basic operations to playback images
and movies.
C
About images shot and saved with another device
The camera may not be able to properly display images captured with a
different camera, edited with a computer or whose file name was
changed.
81
d Playing Back with the Touch Screen
The LCD monitor is a touch-sensitive panel that you can touch with your
fingers for playback operations. Press the <x> button to play back
images. (The last shot will appear first.)
If the power is off, you can hold down the <x> button for 2 sec. or longer to
turn on the camera and display the playback screen.
Browse Images
Swipe with one finger.
With the single-image display, use one
finger to swipe the image to the left or
right to see another image.
Swipe to the left to see the next (newer)
image or swipe to the right to see the
previous (older) image.
With the index display of four or nine
images, use one finger to scroll up or
down the screen to display another
screen of index images. Swipe your
finger up to see newer images or swipe
your finger down to see the older images.
When you select an image and tap it, it
will be displayed as a single image.
C
Y
P
O
Jump through Images (Jump Display)
Swipe with two fingers.
When you use two fingers to swipe left or
right on the screen, you can jump through
images with the method set in [Image jump
with 5] under the [x2] tab.
82
d Playing Back with the Touch Screen
Reduce Images (Index Display)
Pinch two fingers.
Touch the screen with two fingers spread
apart, and pinch your fingers together on the
screen.
Each time you pinch your fingers, the
screen changes from a single-image
display to a 4-image index display and 9image index display.
The selected image on the index display
is indicated in an orange frame.
Movie images on the index display will
have a vertical perforation.
Magnify Images
Y
P
O
Spread two fingers apart.
Touch the screen with two fingers together,
then spread your fingers apart on the
screen.
As you spread your fingers, the image
will be magnified.
The image can be magnified up to 10x.
Tapping the [2] icon on the screen’s
upper right will return to the single-image
display.
C
83
k Playing Movies
back the image.
1 Play
Press the <x> button to display images.
a movie.
2 Select
Press the <YA>/<ZO> button to
select a movie.
On the single-image display, the < 1>
icon displayed on the upper left indicates
a movie. If the movie is a video snapshot,
<
> will be displayed.
You can press the <B> button to
switch to the shooting information display
(9?).
In the index display, perforations at the
left edge of a thumbnail indicate a movie.
As movies cannot be played on the
index display, press <Q/0> to
switch to the single-image display.
3
Y
P
O
In the single-image display, press
< 1>.
C
X The movie playback panel will appear at
the bottom of the screen.
back the movie.
4 Play
Select [7] (Play), then press <Q/0>.
Speaker
84
X The movie will start playing.
You can pause the movie playback by
pressing <Q/0>.
During movie playback, you can turn the
<5> dial to adjust the built-in speaker’s
sound volume.
For more details on the playback
procedure, see the next page.
k Playing Movies
Movie Playback Panel
Operation
Playback Description
7 Play
Pressing <Q/0> toggles between play and stop.
8 Slow motion
Adjust the slow motion speed by pressing the <YA>/<ZO>
button. The slow-motion speed is indicated at the upper right of
the screen.
5 First frame
Displays the movie’s first frame.
3 Previous frame
Each time you press <Q/0>, the previous frame is displayed.
If you hold down <Q/0>, it will rewind the movie.
6 Next frame
Each time you press <Q/0>, the movie will play frame-by
frame. If you hold down <Q/0>, it will fast forward the movie.
4 Last frame
Displays the movie’s last frame.
X Edit
Displays the editing screen (9?).
Background music*
Play back a movie with the selected background music
(9?).
Y
P
O
Play back position
mm’ ss”
Playback time (minutes:seconds)
9 Volume
You can adjust the built-in speaker’s (p.84) volume by turning the
<5> dial.
32
Returns to the single-image display.
C
* When background music is set, the movie’s sound will not be played.
Playback with the Touch Screen
Tap [7] at the center of the screen.
X The movie will start playing.
To display the movie playback panel, tap
< 1> on the upper left of the screen.
To pause the movie while it is playing, tap
the screen. The movie playback panel
will also appear.
With a fully-charged Battery Pack LP-E12, the continuous playback time at
23°C/73°F will be as follows: approx. 2 hr. 20 min.
If you took a still photo while you shot the movie, the still photo will be
displayed for approx. 1 sec. during the movie playback.
85
Instruction Manuals in the
CD-ROM and Software Start Guide
Y
P
O
This chapter explains how to view the instruction manual PDF
files in the provided CD-ROMs. It also introduces the software
contained in the EOS DIGITAL Solution Disk (CD-ROM) and
explains how to install them to your personal computer.
C
EOS DIGITAL
Solution Disk
(Software)
86
Instruction Manual
Software
Instruction Manual
Viewing the Instruction Manual CD-ROM
Camera Instruction Manual
The Instruction Manual CD-ROM has the following PDF files:
Camera Instruction Manual, Lens Instruction Manual (EFM18-55mm f/3.5-5.6 IS STM and EF-M22mm f/2 STM),
Mount Adapter EF-EOS M Instruction Manual, and Speedlite
90EX Instruction Manual.
Camera Instruction Manual (PDF file)
Explains all the camera’s functions and operation procedures and includes
also all the contents in this Basic Instruction Manual. Contains instructions for
all functions, including those covered in this Basic Instruction Manual. It
provides detailed instructions not found in this Basic Instruction Manual such
as shooting with EF and EF-S lenses with Mount Adapter EF-EOS M,
advanced shooting and playback procedures, printing photos, and Custom
Functions.
Y
P
O
Accessory Instruction Manual (PDF file)
PDF files for the Lens Instruction Manual (EF-M18-55mm f/3.5-5.6 IS STM
and EF-M22mm f/2 STM), Mount Adapter EF-EOS M Instruction Manual, and
Speedlite 90EX Instruction Manual are provided.
C
Viewing the Instruction Manual CD-ROM
To view the instruction manual PDF files in the Instruction Manual CD-ROM,
your personal computer must have Adobe Reader (version 6.0 or higher)
installed. You can download Adobe Reader from the Internet for free. After
installing Adobe Reader, follow the procedure below.
1
Insert the Instruction Manual CD-ROM into your
computer.
2
Double-click the CD-ROM icon.
For Windows, the icon will be displayed in [(My)
Computer].
For Macintosh, the icon will be displayed on the
desktop.
The icon that appears will differ depending on your
computer.
87
Viewing the Instruction Manual CD-ROM
3
Double-click the “START” file.
4
Click on the name of the instruction manual you
want to view.
The screen shown in step 4 will appear.
The icon that appears will differ depending on your
computer.
Click on the name of the instruction manual under the
desired language.
X The Instruction Manual in the desired language will be
displayed.
日本語
English
使用説明書
INSTRUCTION MANUAL
Français
MODE D’EMPLOI
EOS M
EOS M
EF-M18-55mm F3.5-5.6 IS STM
EF-M18-55mm f/3.5-5.6 IS STM
EF-M18-55mm f/3,5-5,6 IS STM
EF-M22mm F2 STM
EF-M22mm f/2 STM
EF-M22mm f/2 STM
マウントアダプター EF-EOS M
Mount Adapter EF-EOS M
Bague d’Adaptation monture EF-EOS M
スピードライト 90EX
Speedlite 90EX
Speedlite 90EX
Español
INSTRUCCIONES
简体中文
EOS M
Y
P
O
使用说明书
EOS M
EOS M
EF-M18-55mm f/3,5-5,6 IS STM
EF-M18-55mm f/3.5-5.6 IS STM
EF-M22mm f/2 STM
EF-M22mm f/2 STM
C
B
Adaptador Montura EF-EOS M
卡口适配器 EF-EOS M
Speedlite 90EX
闪光灯 90EX
Camera Instruction Manual
You can copy and save the PDF files to your personal computer.
The Camera Instruction Manual PDF incorporates page links so you can
quickly go to the desired page. On the Contents or Index page, just click on
the page number to jump to that page.
For more information about how to use Adobe Reader, see the Adobe
Reader’s Help menu.
88
About the Software
EOS DIGITAL Solution Disk
This disk contains various software applications for EOS
DIGITAL cameras.
EOS Utility
With the camera connected to a personal computer, EOS Utility enables you
to transfer still photos and movies shot with the camera to the computer. You
can also use EOS Utility to set various camera settings. Also, you can copy
background music tracks, such as EOS Sample Music*, to the card.
* Five original background music tracks are provided by Canon. Use EOS Utility to
copy the background music tracks to the card, and you can play the background
music during playback of video snapshot albums, movies, and slide shows with the
camera.
Y
P
O
Digital Photo Professional
This software is recommended for users who mainly shoot RAW images. You
can view, edit, process, and print RAW images at high speed. You can also
edit JPEG images while retaining the original images.
ImageBrowser EX
C
This software is recommended for users who mainly shoot JPEG images. You
can easily view and play photos, movies, and video snapshot albums and also
print JPEG images. Add-on features such as EOS Video Snapshot Task
(9?) can also be downloaded from the Internet.
Note that the software ZoomBrowser EX/ImageBrowser provided with previous
cameras does not support still photos and movie files shot with this camera (it is not
compatible). Use ImageBrowser EX provided with this camera.
Picture Style Editor
You can edit Picture Styles and create and save original Picture Style files.
This software is aimed at advanced users who are experienced in processing
images.
89
Installing the Software
Do not connect the camera to your computer before you install the software.
Otherwise, the software will not be installed properly.
Even if your personal computer already has ImageBrowser EX installed,
install ImageBrowser EX included on the CD-ROM that came with your new
camera. It is the latest version with features optimized for your camera. You
can also use the auto update feature to add the latest functions.
Even if a previous version of the software is installed or if you have different
software, install the software by following the steps below. (The newer
version will overwrite the previous version.)
1 Insert EOS DIGITAL Solution Disk (CD-ROM).
For Macintosh, double-click to open the CD-ROM icon displayed on the
desktop, then double-click on [Canon EOS Digital Installer].
2 Click [Easy Installation] and follow the on-screen instructions
to install.
Y
P
O
For Macintosh, click [Install].
If install screen for “Microsoft Silverlight” is displayed during installation,
install “Microsoft Silverlight”.
C
3 Click [Restart] and remove the CD-ROM after the computer
restarts.
When the computer has restarted, the installation is complete.
90
Software Instruction Manual
Contains the Software Instruction Manuals.
Copying and Viewing the Instruction Manual PDFs
1 Insert the [Software INSTRUCTION MANUAL] CD-ROM into your
computer.
2 Double-click the CD-ROM icon.
For Windows, the icon is displayed in [(My) Computer].
For Macintosh, the icon is displayed on the desktop.
3 Copy the [English] folder to your computer.
Instruction Manual PDFs with the names below are copied.
EOS Utility
Digital Photo Professional
ImageBrowser EX
Picture Style Editor
C
Y
P
O
Windows
Macintosh
EUx.xW_E_xx
EUx.xM_E_xx
DPPx.xW_E_xx
DPPx.xM_E_xx
IBXx.x_E_xx
PSEx.xW_E_xx
PSEx.xM_E_xx
4 Double-click the copied PDF file.
Adobe Reader (most recent version recommended) must be installed
on your computer.
Adobe Reader can be downloaded free from the Internet.
91
Software System Requirements
For the latest compatibility information (including new OS versions), refer to
your local Canon Web site.
EOS Utility
Windows
OS
Windows 7*1
Windows Vista*2
Windows XP Professional/Home Edition*3
Computer
PC with one of the above OS preinstalled and a USB port as a
standard feature (Upgraded machines not supported)
* .NET Framework 3.0 or later is required.*4
CPU
1.3GHz Pentium or higher
RAM
Minimum 1GB*5
Interface
Hi-Speed USB
Display
Screen resolution: 1024 x 768 pixels or more
Color quality: Medium (16 bit) or more
Y
P
O
*1 Compatible with 32-bit/64-bit systems for all versions except Starter Edition
*2 Compatible with 32-bit/64-bit systems for Service Pack 1 and Service Pack 2 except
Starter Edition
*3 Compatible with Service Pack 3
*4 .NET Framework is Microsoft software. It is installed together with EU.
*5 For Windows 7 64-bit systems, minimum 2GB
Macintosh
C
OS
Mac OS X 10.6.8, 10.7
Computer
Macintosh with one of the above OS installed and a USB port as
a standard feature
CPU
Intel processor
RAM
Minimum 1GB
Interface
Hi-Speed USB
Display
Resolution: 1024 x 768 or more
Colors: Thousands or more
92
Software System Requirements
Digital Photo Professional
Windows
OS
Windows 7*1
Windows Vista*2
Windows XP Professional/Home Edition*3
Computer
PC with one of the above OS preinstalled
* Upgraded machines not supported
CPU
1.3GHz Pentium or higher*4
RAM
Minimum 1GB*5
Display
Screen resolution: 1024 x 768 pixels or more
Color quality: Medium (16 bit) or more
*1 Compatible with 32-bit/64-bit systems for all versions except Starter Edition
*2 Compatible with 32-bit/64-bit systems for Service Pack 1 and Service Pack 2 except
Starter Edition
*3 Compatible with Service Pack 3
*4 Core2 Duo or higher is recommended
*5 For Windows 7 64-bit systems, minimum 2GB
Macintosh
Y
P
O
OS
Mac OS X 10.6, 10.7
Computer
Macintosh with one of the above OS installed
CPU
Intel processor*
RAM
Minimum 1GB
Display
Resolution: 1024 x 768 or more
Colors: Thousands or more
C
* Core2 Duo or higher is recommended.
This software program is not compatible with UFS (UNIX File System) formatted
disks.
93
Software System Requirements
ImageBrowser EX/CameraWindow
Windows
Operating System
Computer
CPU (Still Images)
CPU (Movies)
RAM (Still Images)
Windows 7 SP1
Windows Vista SP2
Windows XP SP3
Computer running one of the above operating systems
(preinstalled), with an included USB port
An Internet connection is required to use the auto update function.
1.6 GHz or higher
HD (720p), SD: Core 2 Duo 1.66 GHz or higher
Full HD (1080p): Core 2 Duo 2.6 GHz or higher
ALL-I, IPB: Core 2 Duo 3.0 GHz or higher
Windows 7 (64-bit): 2 GB or more
Windows 7 (32-bit): 1 GB or more
Windows Vista (64-bit, 32-bit): 1 GB or more
Windows XP: 512 MB or more
Y
P
O
RAM (Movies)
HD (720p), SD: 1 GB or more
Full HD (1080p): 2 GB or more
Interface
Free Hard Disk Space
Display
USB
440 MB or more*
1,024 x 768 resolution or higher
C
* Silverlight 5.1 (100MB maximum) or higher must be installed. Additionally, in
Windows XP, Microsoft .NET Framework 3.0 or later (max. 500 MB) must be installed.
Installation may take some time, depending on computer performance.
Macintosh
Operating System
Computer
CPU (Still Images)
CPU (Movies)
RAM (Still Images)
RAM (Movies)
Interface
Free Hard Disk Space
Display
Mac OS X 10.6, 10.7
Computer running one of the above operating systems
(preinstalled), with an included USB port
An Internet connection is required to use the auto update function.
Core 2 Duo or higher (for v10.7)
Core Duo 1.83 GHz or higher (for v10.6)
HD (720p), SD: Core Duo 1.83 GHz or higher
Full HD (1080p): Core 2 Duo 2.6 GHz or higher
ALL-I, IPB: Core 2 Duo 3.0 GHz or higher
2 GB or more (v10.7), 1 GB or more (v10.6)
HD (720p), SD: 2 GB or more (v10.7), 1 GB or more (v10.6)
Full HD (1080p): 2 GB or more
USB
550 MB or more*
1,024 x 768 resolution or higher
* Silverlight 5.1 (100MB maximum) or higher must be installed. For this reason,
depending on the system used, the installation may take some time.
94
Software System Requirements
Picture Style Editor
Windows
OS
Windows 7*1
Windows Vista*2
Windows XP Professional/Home Edition*3
Computer
PC with one of the above OS preinstalled (Upgraded machines
not supported)
* .NET Framework 3.0 or later is required.*4
CPU
1.3GHz Pentium or higher*5
RAM
Minimum 1GB*6
Display
Screen resolution: 1024 x 768 pixels or more
Color quality: Medium (16 bit) or more
*1 Compatible with 32-bit/64-bit systems for all versions except Starter Edition
*2 Compatible with 32-bit/64-bit systems for Service Pack 1 or Service Pack 2 for all
versions except Starter Edition
*3 Compatible with Service Pack 3
*4 .NET Framework is Microsoft software. It is installed together with PSE.
*5 Core2 Duo or higher is recommended
*6 For Windows 7 64-bit systems, minimum 2GB
Macintosh
C
Y
P
O
OS
Mac OS X 10.6 to 10.7
Computer
Macintosh with one of the above OS installed
CPU
Intel processor*
RAM
Minimum 1GB
Display
Resolution: 1024 x 768 or more
Colors: Thousands or more
* Core 2 Duo or higher recommended.
This software program is not compatible with UFS (UNIX File System) formatted
disks.
95
Safety Warnings
Follow these safeguards and use the equipment properly to prevent injury,
death, and material damage.
Preventing Serious Injury or Death
• To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards
below:
- Do not use any batteries, power sources, and accessories not specified in this booklet.
Do not use any home-made or modified batteries.
- Do not short-circuit, disassemble, or modify the battery pack or back-up battery. Do not
apply heat or apply solder to the battery pack or back-up battery. Do not expose the
battery pack or back-up battery to fire or water. And do not subject the battery pack or
back-up battery to strong physical shock.
- Do not install the battery pack or back-up battery in reversed polarity (+ –). Do not mix
new and old or different types of batteries.
- Do not recharge the battery pack outside the allowable ambient temperature range of 0°C
- 40°C (32°F - 104°F). Also, do not exceed the recharging time.
- Do not insert any foreign metallic objects into the electrical contacts of the camera,
accessories, connecting cables, etc.
Y
P
O
• Keep the back-up battery away from children. If a child swallows the battery, consult a
physician immediately. (Battery chemicals may harm the stomach and intestines.)
• When disposing of a battery pack or back-up battery, insulate the electrical contacts with
tape to prevent contact with other metallic objects or batteries. This is to prevent fire or an
explosion.
C
• If excessive heat, smoke, or fumes are emitted during battery pack recharging, immediately
unplug the battery charger from the power outlet to stop the recharging and prevent a fire.
• If the battery pack or back-up battery leaks, changes color, deforms, or emits smoke or
fumes, remove it immediately. Be careful not to get burned in the process.
• Prevent any battery leakage from contacting your eyes, skin, and clothing. It can cause
blindness or skin problems. If the battery leakage contacts your eyes, skin, or clothing, flush
the affected area with lots of clean water without rubbing it. See a physician immediately.
• During the recharging, keep the equipment away from the reach of children. The cord can
accidentally choke the child or give an electrical shock.
• Do not leave any cords near a heat source. It can deform the cord or melt the insulation and
cause a fire or electrical shock.
• Do not fire the flash at someone driving a car. It may cause an accident.
• Do not fire the flash near a person’s eyes. It may impair the person’s vision. When using
flash to photograph an infant, keep at least 1 meter away.
• Before storing the camera or accessory when not in use, remove the battery pack and
disconnect the power plug. This is to prevent electrical shock, heat generation, and fire.
• Do not use the equipment where there is flammable gas. This is to prevent an explosion or
fire.
• If you drop the equipment and the casing breaks open to expose the internal parts, do not
touch the internal parts due to the possibility of electrical shock.
96
• Do not disassemble or modify the equipment. High-voltage internal parts can cause
electrical shock.
• Do not look at the sun or an extremely bright light source through the camera or lens. Doing
so may damage your vision.
• Keep the camera from the reach of small children. The neck strap can accidentally choke
the child.
• Do not store the equipment in dusty or humid places. This is to prevent fire and electrical
shock.
• Before using the camera inside an airplane or hospital, check if it is allowed.
Electromagnetic waves emitted by the camera may interfere with the plane’s instruments or
the hospital’s medical equipment.
• To prevent fire and electrical shock, follow the safeguards below:
- Always insert the power plug all the way in.
- Do not handle a power plug with wet hands.
- When unplugging a power plug, grasp and pull the plug instead of the cord.
- Do not scratch, cut, or excessively bend the cord or put a heavy object on the cord. Also
do not twist or tie the cords.
- Do not connect too many power plugs to the same power outlet.
- Do not use a cord whose insulation has been damaged.
Y
P
O
• Occasionally unplug the power plug and use a dry cloth to clean off the dust around the
power outlet. If the surrounding is dusty, humid, or oily, the dust on the power outlet may
become moist and short-circuit the outlet to cause a fire.
Preventing Injury or Equipment Damage
C
• Do not leave equipment inside a car under the hot sun or near a heat source. The
equipment may become hot and cause skin burns.
• Do not carry the camera around while it is attached to a tripod. Doing so may cause injury.
Also make sure the tripod is sturdy enough to support the camera and lens.
• Do not leave a lens or lens-attached camera under the sun without the lens cap attached.
Otherwise, the lens may concentrate the sun’s rays and cause a fire.
• Do not cover or wrap the battery-recharging apparatus with a cloth. Doing so may trap heat
within and cause the casing to deform or catch fire.
• If you drop the camera in water or if water or metal fragments enter inside the camera,
promptly remove the battery pack and back-up battery. This is to prevent fire and electrical
shock.
• Do not use or leave the battery pack or back-up battery in a hot environment. Doing so may
cause battery leakage or a shorter battery life. The battery pack or back-up battery can also
become hot and cause skin burns.
• Do not use paint thinner, benzene, or other organic solvents to clean the equipment. Doing
so may cause fire or a health hazard.
If the product does not work properly or requires repair, contact your
dealer or your nearest Canon Service Center.
97
Digital Camera Model DS126391 Systems
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for class
B digital devices, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Y
P
O
The cable with the ferrite core provided with the digital camera must be used with
this equipment in order to comply with Class B limits in Subpart B of Part 15 of the
FCC rules.
C
Do not make any changes or modifications to the equipment unless otherwise
specified in the manual. If such changes or modifications should be made, you
could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
This Class B digital apparatus complies with Canadian ICES-003.
When connecting to and using a household power outlet, use only AC
Adapter Kit ACK-E12 (rated input: 100-240 V AC 50/60 Hz, rated output: 7.4
V DC). Using anything else can cause fire, overheating, or electrical shock.
98
IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS — This manual contains important safety and
operating instructions for Battery Charger LC-E12 & LC-E12E.
2. Before using the charger, read all instructions and cautionary remarks on (1) the
charger, (2) the battery pack, and (3) the product using the battery pack.
3. CAUTION — To reduce risk of injury, charge only the Battery Pack LP-E12.
Other types of batteries may burst, causing personal injury and other damage.
4. Do not expose the charger to rain or snow.
5. Use of an attachment not recommended or sold by Canon may result in fire,
electric shock, or personal injury.
6. To reduce risk of damage to electric plug and cord, pull by plug rather than by
cord when disconnecting charger.
7. Make sure cord is located so that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
8. Do not operate the charger with damaged cord or plug - replace them
immediately.
9. Do not operate the charger if it has received a sharp blow, been dropped, or
otherwise damaged in any way; take it to a qualified serviceman.
10.Do not disassemble the charger; take it to a qualified serviceman when service
or repair is required. Incorrect reassembly may result in a risk of electric shock or
fire.
11. To reduce risk of electric shock, unplug charger from outlet before attempting
any maintenance or cleaning.
Y
P
O
MAINTENANCE INSTRUCTION
C
Unless otherwise stated in this manual, there are no user serviceable parts inside.
Refer servicing to qualified serviceman.
USA and Canada only:
The Lithium ion/polymer battery that powers the product is
recyclable. Please call 1-800-8-BATTERY for information on how to
recycle this battery.
For CA, USA only
Included lithium battery contains Perchlorate Material – special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
99
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
U.S.A.
CANON U.S.A. INC.
One Canon Plaza, Lake Success, NY 11042-1198, U.S.A.
For all inquires concerning this product, call toll free in the U.S.
1-800-OK-CANON
CANADA
CANON CANADA INC. HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada
CANON CANADA INC. MONTREAL BRANCH
5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada
CANON CANADA INC. CALGARY OFFICE
2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada
For all inquiries concerning this product, call toll free in Canada
1-800-OK-CANON
EUROPE,
AFRICA &
MIDDLE EAST
CANON EUROPA N.V.
Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands
CANON FRANCE S.A.S.
17, Quai du Président Paul Doumer, 92414 Courbevoie Cedex, France
CANON UK LTD.
Woodhatch Reigate,Surrey RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano 8, 20097 San Donato Milanese, (MI), Italy
CANON Schweiz A.G.
Industriestrasse 12, 8305 Dietlikon, Switzerland
Canon GmbH
Zetschegasse 11, A-1230 Vienna, Austria
CANON España,S.A.
Av. De Europa,6 Alcobendas 28108 Madrid, Spain
CANON Portugal S.A.
Rua Alfredo da Silva,14 Alfragide 2610-016 Amadora, Portugal
C
Y
P
O
CENTRAL &
SOUTH AMERICA
CANON LATIN AMERICA, INC.
703 Waterford Way, Suite 400 Miami, FL 33126,U.S.A.
ASIA
CANON (China) Co., LTD.
15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China
CANON HONGKONG CO., LTD.
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632
CANON KOREA CONSUMER IMAGING INC.
Canon BS Tower 5F, #168-12 Samseong-dong, Gangnam-gu, Seoul, Korea
OCEANIA
CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand
JAPAN
CANON MARKETING JAPAN INC.
16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan
The lenses and accessories mentioned in this Instruction Manual are current as of
July 2012. For information on the camera’s compatibility with any lenses and
accessories introduced after this date, contact any Canon Service Center.
CPH-E035-000
© CANON INC. 2012
Download PDF

advertising